| /* |
| * Generic EP93xx GPIO handling |
| * |
| * Copyright (c) 2008 Ryan Mallon |
| * Copyright (c) 2011 H Hartley Sweeten <hsweeten@visionengravers.com> |
| * |
| * Based on code originally from: |
| * linux/arch/arm/mach-ep93xx/core.c |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| */ |
| |
| #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt |
| |
| #include <linux/init.h> |
| #include <linux/module.h> |
| #include <linux/platform_device.h> |
| #include <linux/io.h> |
| #include <linux/gpio.h> |
| #include <linux/irq.h> |
| #include <linux/slab.h> |
| #include <linux/basic_mmio_gpio.h> |
| |
| #include <mach/hardware.h> |
| #include <mach/gpio-ep93xx.h> |
| |
| #define irq_to_gpio(irq) ((irq) - gpio_to_irq(0)) |
| |
| struct ep93xx_gpio { |
| void __iomem *mmio_base; |
| struct bgpio_chip bgc[8]; |
| }; |
| |
| /************************************************************************* |
| * Interrupt handling for EP93xx on-chip GPIOs |
| *************************************************************************/ |
| static unsigned char gpio_int_unmasked[3]; |
| static unsigned char gpio_int_enabled[3]; |
| static unsigned char gpio_int_type1[3]; |
| static unsigned char gpio_int_type2[3]; |
| static unsigned char gpio_int_debounce[3]; |
| |
| /* Port ordering is: A B F */ |
| static const u8 int_type1_register_offset[3] = { 0x90, 0xac, 0x4c }; |
| static const u8 int_type2_register_offset[3] = { 0x94, 0xb0, 0x50 }; |
| static const u8 eoi_register_offset[3] = { 0x98, 0xb4, 0x54 }; |
| static const u8 int_en_register_offset[3] = { 0x9c, 0xb8, 0x58 }; |
| static const u8 int_debounce_register_offset[3] = { 0xa8, 0xc4, 0x64 }; |
| |
| static void ep93xx_gpio_update_int_params(unsigned port) |
| { |
| BUG_ON(port > 2); |
| |
| __raw_writeb(0, EP93XX_GPIO_REG(int_en_register_offset[port])); |
| |
| __raw_writeb(gpio_int_type2[port], |
| EP93XX_GPIO_REG(int_type2_register_offset[port])); |
| |
| __raw_writeb(gpio_int_type1[port], |
| EP93XX_GPIO_REG(int_type1_register_offset[port])); |
| |
| __raw_writeb(gpio_int_unmasked[port] & gpio_int_enabled[port], |
| EP93XX_GPIO_REG(int_en_register_offset[port])); |
| } |
| |
| static inline void ep93xx_gpio_int_mask(unsigned line) |
| { |
| gpio_int_unmasked[line >> 3] &= ~(1 << (line & 7)); |
| } |
| |
| static void ep93xx_gpio_int_debounce(unsigned int irq, bool enable) |
| { |
| int line = irq_to_gpio(irq); |
| int port = line >> 3; |
| int port_mask = 1 << (line & 7); |
| |
| if (enable) |
| gpio_int_debounce[port] |= port_mask; |
| else |
| gpio_int_debounce[port] &= ~port_mask; |
| |
| __raw_writeb(gpio_int_debounce[port], |
| EP93XX_GPIO_REG(int_debounce_register_offset[port])); |
| } |
| |
| static void ep93xx_gpio_ab_irq_handler(unsigned int irq, struct irq_desc *desc) |
| { |
| unsigned char status; |
| int i; |
| |
| status = __raw_readb(EP93XX_GPIO_A_INT_STATUS); |
| for (i = 0; i < 8; i++) { |
| if (status & (1 << i)) { |
| int gpio_irq = gpio_to_irq(EP93XX_GPIO_LINE_A(0)) + i; |
| generic_handle_irq(gpio_irq); |
| } |
| } |
| |
| status = __raw_readb(EP93XX_GPIO_B_INT_STATUS); |
| for (i = 0; i < 8; i++) { |
| if (status & (1 << i)) { |
| int gpio_irq = gpio_to_irq(EP93XX_GPIO_LINE_B(0)) + i; |
| generic_handle_irq(gpio_irq); |
| } |
| } |
| } |
| |
| static void ep93xx_gpio_f_irq_handler(unsigned int irq, struct irq_desc *desc) |
| { |
| /* |
| * map discontiguous hw irq range to continuous sw irq range: |
| * |
| * IRQ_EP93XX_GPIO{0..7}MUX -> gpio_to_irq(EP93XX_GPIO_LINE_F({0..7}) |
| */ |
| int port_f_idx = ((irq + 1) & 7) ^ 4; /* {19..22,47..50} -> {0..7} */ |
| int gpio_irq = gpio_to_irq(EP93XX_GPIO_LINE_F(0)) + port_f_idx; |
| |
| generic_handle_irq(gpio_irq); |
| } |
| |
| static void ep93xx_gpio_irq_ack(struct irq_data *d) |
| { |
| int line = irq_to_gpio(d->irq); |
| int port = line >> 3; |
| int port_mask = 1 << (line & 7); |
| |
| if (irqd_get_trigger_type(d) == IRQ_TYPE_EDGE_BOTH) { |
| gpio_int_type2[port] ^= port_mask; /* switch edge direction */ |
| ep93xx_gpio_update_int_params(port); |
| } |
| |
| __raw_writeb(port_mask, EP93XX_GPIO_REG(eoi_register_offset[port])); |
| } |
| |
| static void ep93xx_gpio_irq_mask_ack(struct irq_data *d) |
| { |
| int line = irq_to_gpio(d->irq); |
| int port = line >> 3; |
| int port_mask = 1 << (line & 7); |
| |
| if (irqd_get_trigger_type(d) == IRQ_TYPE_EDGE_BOTH) |
| gpio_int_type2[port] ^= port_mask; /* switch edge direction */ |
| |
| gpio_int_unmasked[port] &= ~port_mask; |
| ep93xx_gpio_update_int_params(port); |
| |
| __raw_writeb(port_mask, EP93XX_GPIO_REG(eoi_register_offset[port])); |
| } |
| |
| static void ep93xx_gpio_irq_mask(struct irq_data *d) |
| { |
| int line = irq_to_gpio(d->irq); |
| int port = line >> 3; |
| |
| gpio_int_unmasked[port] &= ~(1 << (line & 7)); |
| ep93xx_gpio_update_int_params(port); |
| } |
| |
| static void ep93xx_gpio_irq_unmask(struct irq_data *d) |
| { |
| int line = irq_to_gpio(d->irq); |
| int port = line >> 3; |
| |
| gpio_int_unmasked[port] |= 1 << (line & 7); |
| ep93xx_gpio_update_int_params(port); |
| } |
| |
| /* |
| * gpio_int_type1 controls whether the interrupt is level (0) or |
| * edge (1) triggered, while gpio_int_type2 controls whether it |
| * triggers on low/falling (0) or high/rising (1). |
| */ |
| static int ep93xx_gpio_irq_type(struct irq_data *d, unsigned int type) |
| { |
| const int gpio = irq_to_gpio(d->irq); |
| const int port = gpio >> 3; |
| const int port_mask = 1 << (gpio & 7); |
| irq_flow_handler_t handler; |
| |
| gpio_direction_input(gpio); |
| |
| switch (type) { |
| case IRQ_TYPE_EDGE_RISING: |
| gpio_int_type1[port] |= port_mask; |
| gpio_int_type2[port] |= port_mask; |
| handler = handle_edge_irq; |
| break; |
| case IRQ_TYPE_EDGE_FALLING: |
| gpio_int_type1[port] |= port_mask; |
| gpio_int_type2[port] &= ~port_mask; |
| handler = handle_edge_irq; |
| break; |
| case IRQ_TYPE_LEVEL_HIGH: |
| gpio_int_type1[port] &= ~port_mask; |
| gpio_int_type2[port] |= port_mask; |
| handler = handle_level_irq; |
| break; |
| case IRQ_TYPE_LEVEL_LOW: |
| gpio_int_type1[port] &= ~port_mask; |
| gpio_int_type2[port] &= ~port_mask; |
| handler = handle_level_irq; |
| break; |
| case IRQ_TYPE_EDGE_BOTH: |
| gpio_int_type1[port] |= port_mask; |
| /* set initial polarity based on current input level */ |
| if (gpio_get_value(gpio)) |
| gpio_int_type2[port] &= ~port_mask; /* falling */ |
| else |
| gpio_int_type2[port] |= port_mask; /* rising */ |
| handler = handle_edge_irq; |
| break; |
| default: |
| pr_err("failed to set irq type %d for gpio %d\n", type, gpio); |
| return -EINVAL; |
| } |
| |
| __irq_set_handler_locked(d->irq, handler); |
| |
| gpio_int_enabled[port] |= port_mask; |
| |
| ep93xx_gpio_update_int_params(port); |
| |
| return 0; |
| } |
| |
| static struct irq_chip ep93xx_gpio_irq_chip = { |
| .name = "GPIO", |
| .irq_ack = ep93xx_gpio_irq_ack, |
| .irq_mask_ack = ep93xx_gpio_irq_mask_ack, |
| .irq_mask = ep93xx_gpio_irq_mask, |
| .irq_unmask = ep93xx_gpio_irq_unmask, |
| .irq_set_type = ep93xx_gpio_irq_type, |
| }; |
| |
| static void ep93xx_gpio_init_irq(void) |
| { |
| int gpio_irq; |
| |
| for (gpio_irq = gpio_to_irq(0); |
| gpio_irq <= gpio_to_irq(EP93XX_GPIO_LINE_MAX_IRQ); ++gpio_irq) { |
| irq_set_chip_and_handler(gpio_irq, &ep93xx_gpio_irq_chip, |
| handle_level_irq); |
| set_irq_flags(gpio_irq, IRQF_VALID); |
| } |
| |
| irq_set_chained_handler(IRQ_EP93XX_GPIO_AB, |
| ep93xx_gpio_ab_irq_handler); |
| irq_set_chained_handler(IRQ_EP93XX_GPIO0MUX, |
| ep93xx_gpio_f_irq_handler); |
| irq_set_chained_handler(IRQ_EP93XX_GPIO1MUX, |
| ep93xx_gpio_f_irq_handler); |
| irq_set_chained_handler(IRQ_EP93XX_GPIO2MUX, |
| ep93xx_gpio_f_irq_handler); |
| irq_set_chained_handler(IRQ_EP93XX_GPIO3MUX, |
| ep93xx_gpio_f_irq_handler); |
| irq_set_chained_handler(IRQ_EP93XX_GPIO4MUX, |
| ep93xx_gpio_f_irq_handler); |
| irq_set_chained_handler(IRQ_EP93XX_GPIO5MUX, |
| ep93xx_gpio_f_irq_handler); |
| irq_set_chained_handler(IRQ_EP93XX_GPIO6MUX, |
| ep93xx_gpio_f_irq_handler); |
| irq_set_chained_handler(IRQ_EP93XX_GPIO7MUX, |
| ep93xx_gpio_f_irq_handler); |
| } |
| |
| |
| /************************************************************************* |
| * gpiolib interface for EP93xx on-chip GPIOs |
| *************************************************************************/ |
| struct ep93xx_gpio_bank { |
| const char *label; |
| int data; |
| int dir; |
| int base; |
| bool has_debounce; |
| }; |
| |
| #define EP93XX_GPIO_BANK(_label, _data, _dir, _base, _debounce) \ |
| { \ |
| .label = _label, \ |
| .data = _data, \ |
| .dir = _dir, \ |
| .base = _base, \ |
| .has_debounce = _debounce, \ |
| } |
| |
| static struct ep93xx_gpio_bank ep93xx_gpio_banks[] = { |
| EP93XX_GPIO_BANK("A", 0x00, 0x10, 0, true), |
| EP93XX_GPIO_BANK("B", 0x04, 0x14, 8, true), |
| EP93XX_GPIO_BANK("C", 0x08, 0x18, 40, false), |
| EP93XX_GPIO_BANK("D", 0x0c, 0x1c, 24, false), |
| EP93XX_GPIO_BANK("E", 0x20, 0x24, 32, false), |
| EP93XX_GPIO_BANK("F", 0x30, 0x34, 16, true), |
| EP93XX_GPIO_BANK("G", 0x38, 0x3c, 48, false), |
| EP93XX_GPIO_BANK("H", 0x40, 0x44, 56, false), |
| }; |
| |
| static int ep93xx_gpio_set_debounce(struct gpio_chip *chip, |
| unsigned offset, unsigned debounce) |
| { |
| int gpio = chip->base + offset; |
| int irq = gpio_to_irq(gpio); |
| |
| if (irq < 0) |
| return -EINVAL; |
| |
| ep93xx_gpio_int_debounce(irq, debounce ? true : false); |
| |
| return 0; |
| } |
| |
| /* |
| * Map GPIO A0..A7 (0..7) to irq 64..71, |
| * B0..B7 (7..15) to irq 72..79, and |
| * F0..F7 (16..24) to irq 80..87. |
| */ |
| static int ep93xx_gpio_to_irq(struct gpio_chip *chip, unsigned offset) |
| { |
| int gpio = chip->base + offset; |
| |
| if (gpio > EP93XX_GPIO_LINE_MAX_IRQ) |
| return -EINVAL; |
| |
| return 64 + gpio; |
| } |
| |
| static int ep93xx_gpio_add_bank(struct bgpio_chip *bgc, struct device *dev, |
| void __iomem *mmio_base, struct ep93xx_gpio_bank *bank) |
| { |
| void __iomem *data = mmio_base + bank->data; |
| void __iomem *dir = mmio_base + bank->dir; |
| int err; |
| |
| err = bgpio_init(bgc, dev, 1, data, NULL, NULL, dir, NULL, false); |
| if (err) |
| return err; |
| |
| bgc->gc.label = bank->label; |
| bgc->gc.base = bank->base; |
| |
| if (bank->has_debounce) { |
| bgc->gc.set_debounce = ep93xx_gpio_set_debounce; |
| bgc->gc.to_irq = ep93xx_gpio_to_irq; |
| } |
| |
| return gpiochip_add(&bgc->gc); |
| } |
| |
| static int __devinit ep93xx_gpio_probe(struct platform_device *pdev) |
| { |
| struct ep93xx_gpio *ep93xx_gpio; |
| struct resource *res; |
| void __iomem *mmio; |
| int i; |
| int ret; |
| |
| ep93xx_gpio = kzalloc(sizeof(*ep93xx_gpio), GFP_KERNEL); |
| if (!ep93xx_gpio) |
| return -ENOMEM; |
| |
| res = platform_get_resource(pdev, IORESOURCE_MEM, 0); |
| if (!res) { |
| ret = -ENXIO; |
| goto exit_free; |
| } |
| |
| if (!request_mem_region(res->start, resource_size(res), pdev->name)) { |
| ret = -EBUSY; |
| goto exit_free; |
| } |
| |
| mmio = ioremap(res->start, resource_size(res)); |
| if (!mmio) { |
| ret = -ENXIO; |
| goto exit_release; |
| } |
| ep93xx_gpio->mmio_base = mmio; |
| |
| /* Default all ports to GPIO */ |
| ep93xx_devcfg_set_bits(EP93XX_SYSCON_DEVCFG_KEYS | |
| EP93XX_SYSCON_DEVCFG_GONK | |
| EP93XX_SYSCON_DEVCFG_EONIDE | |
| EP93XX_SYSCON_DEVCFG_GONIDE | |
| EP93XX_SYSCON_DEVCFG_HONIDE); |
| |
| for (i = 0; i < ARRAY_SIZE(ep93xx_gpio_banks); i++) { |
| struct bgpio_chip *bgc = &ep93xx_gpio->bgc[i]; |
| struct ep93xx_gpio_bank *bank = &ep93xx_gpio_banks[i]; |
| |
| if (ep93xx_gpio_add_bank(bgc, &pdev->dev, mmio, bank)) |
| dev_warn(&pdev->dev, "Unable to add gpio bank %s\n", |
| bank->label); |
| } |
| |
| ep93xx_gpio_init_irq(); |
| |
| return 0; |
| |
| exit_release: |
| release_mem_region(res->start, resource_size(res)); |
| exit_free: |
| kfree(ep93xx_gpio); |
| dev_info(&pdev->dev, "%s failed with errno %d\n", __func__, ret); |
| return ret; |
| } |
| |
| static struct platform_driver ep93xx_gpio_driver = { |
| .driver = { |
| .name = "gpio-ep93xx", |
| .owner = THIS_MODULE, |
| }, |
| .probe = ep93xx_gpio_probe, |
| }; |
| |
| static int __init ep93xx_gpio_init(void) |
| { |
| return platform_driver_register(&ep93xx_gpio_driver); |
| } |
| postcore_initcall(ep93xx_gpio_init); |
| |
| MODULE_AUTHOR("Ryan Mallon <ryan@bluewatersys.com> " |
| "H Hartley Sweeten <hsweeten@visionengravers.com>"); |
| MODULE_DESCRIPTION("EP93XX GPIO driver"); |
| MODULE_LICENSE("GPL"); |