| /* |
| * Detection routine for the NCR53c710 based Amiga SCSI Controllers for Linux. |
| * Amiga MacroSystemUS WarpEngine SCSI controller. |
| * Amiga Technologies/DKB A4091 SCSI controller. |
| * |
| * Written 1997 by Alan Hourihane <alanh@fairlite.demon.co.uk> |
| * plus modifications of the 53c7xx.c driver to support the Amiga. |
| * |
| * Rewritten to use 53c700.c by Kars de Jong <jongk@linux-m68k.org> |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/init.h> |
| #include <linux/interrupt.h> |
| #include <linux/zorro.h> |
| |
| #include <asm/amigahw.h> |
| #include <asm/amigaints.h> |
| |
| #include <scsi/scsi_host.h> |
| #include <scsi/scsi_transport_spi.h> |
| |
| #include "53c700.h" |
| |
| MODULE_AUTHOR("Alan Hourihane <alanh@fairlite.demon.co.uk> / Kars de Jong <jongk@linux-m68k.org>"); |
| MODULE_DESCRIPTION("Amiga Zorro NCR53C710 driver"); |
| MODULE_LICENSE("GPL"); |
| |
| |
| static struct scsi_host_template zorro7xx_scsi_driver_template = { |
| .proc_name = "zorro7xx", |
| .this_id = 7, |
| .module = THIS_MODULE, |
| }; |
| |
| static struct zorro_driver_data { |
| const char *name; |
| unsigned long offset; |
| int absolute; /* offset is absolute address */ |
| } zorro7xx_driver_data[] __devinitdata = { |
| { .name = "PowerUP 603e+", .offset = 0xf40000, .absolute = 1 }, |
| { .name = "WarpEngine 40xx", .offset = 0x40000 }, |
| { .name = "A4091", .offset = 0x800000 }, |
| { .name = "GForce 040/060", .offset = 0x40000 }, |
| { 0 } |
| }; |
| |
| static struct zorro_device_id zorro7xx_zorro_tbl[] __devinitdata = { |
| { |
| .id = ZORRO_PROD_PHASE5_BLIZZARD_603E_PLUS, |
| .driver_data = (unsigned long)&zorro7xx_driver_data[0], |
| }, |
| { |
| .id = ZORRO_PROD_MACROSYSTEMS_WARP_ENGINE_40xx, |
| .driver_data = (unsigned long)&zorro7xx_driver_data[1], |
| }, |
| { |
| .id = ZORRO_PROD_CBM_A4091_1, |
| .driver_data = (unsigned long)&zorro7xx_driver_data[2], |
| }, |
| { |
| .id = ZORRO_PROD_CBM_A4091_2, |
| .driver_data = (unsigned long)&zorro7xx_driver_data[2], |
| }, |
| { |
| .id = ZORRO_PROD_GVP_GFORCE_040_060, |
| .driver_data = (unsigned long)&zorro7xx_driver_data[3], |
| }, |
| { 0 } |
| }; |
| |
| static int __devinit zorro7xx_init_one(struct zorro_dev *z, |
| const struct zorro_device_id *ent) |
| { |
| struct Scsi_Host *host; |
| struct NCR_700_Host_Parameters *hostdata; |
| struct zorro_driver_data *zdd; |
| unsigned long board, ioaddr; |
| |
| board = zorro_resource_start(z); |
| zdd = (struct zorro_driver_data *)ent->driver_data; |
| |
| if (zdd->absolute) { |
| ioaddr = zdd->offset; |
| } else { |
| ioaddr = board + zdd->offset; |
| } |
| |
| if (!zorro_request_device(z, zdd->name)) { |
| printk(KERN_ERR "zorro7xx: cannot reserve region 0x%lx, abort\n", |
| board); |
| return -EBUSY; |
| } |
| |
| hostdata = kzalloc(sizeof(struct NCR_700_Host_Parameters), GFP_KERNEL); |
| if (!hostdata) { |
| printk(KERN_ERR "zorro7xx: Failed to allocate host data\n"); |
| goto out_release; |
| } |
| |
| /* Fill in the required pieces of hostdata */ |
| if (ioaddr > 0x01000000) |
| hostdata->base = ioremap(ioaddr, zorro_resource_len(z)); |
| else |
| hostdata->base = (void __iomem *)ZTWO_VADDR(ioaddr); |
| |
| hostdata->clock = 50; |
| hostdata->chip710 = 1; |
| |
| /* Settings for at least WarpEngine 40xx */ |
| hostdata->ctest7_extra = CTEST7_TT1; |
| |
| zorro7xx_scsi_driver_template.name = zdd->name; |
| |
| /* and register the chip */ |
| host = NCR_700_detect(&zorro7xx_scsi_driver_template, hostdata, |
| &z->dev); |
| if (!host) { |
| printk(KERN_ERR "zorro7xx: No host detected; " |
| "board configuration problem?\n"); |
| goto out_free; |
| } |
| |
| host->this_id = 7; |
| host->base = ioaddr; |
| host->irq = IRQ_AMIGA_PORTS; |
| |
| if (request_irq(host->irq, NCR_700_intr, IRQF_SHARED, "zorro7xx-scsi", |
| host)) { |
| printk(KERN_ERR "zorro7xx: request_irq failed\n"); |
| goto out_put_host; |
| } |
| |
| zorro_set_drvdata(z, host); |
| scsi_scan_host(host); |
| |
| return 0; |
| |
| out_put_host: |
| scsi_host_put(host); |
| out_free: |
| if (ioaddr > 0x01000000) |
| iounmap(hostdata->base); |
| kfree(hostdata); |
| out_release: |
| zorro_release_device(z); |
| |
| return -ENODEV; |
| } |
| |
| static __devexit void zorro7xx_remove_one(struct zorro_dev *z) |
| { |
| struct Scsi_Host *host = zorro_get_drvdata(z); |
| struct NCR_700_Host_Parameters *hostdata = shost_priv(host); |
| |
| scsi_remove_host(host); |
| |
| NCR_700_release(host); |
| kfree(hostdata); |
| free_irq(host->irq, host); |
| zorro_release_device(z); |
| } |
| |
| static struct zorro_driver zorro7xx_driver = { |
| .name = "zorro7xx-scsi", |
| .id_table = zorro7xx_zorro_tbl, |
| .probe = zorro7xx_init_one, |
| .remove = __devexit_p(zorro7xx_remove_one), |
| }; |
| |
| static int __init zorro7xx_scsi_init(void) |
| { |
| return zorro_register_driver(&zorro7xx_driver); |
| } |
| |
| static void __exit zorro7xx_scsi_exit(void) |
| { |
| zorro_unregister_driver(&zorro7xx_driver); |
| } |
| |
| module_init(zorro7xx_scsi_init); |
| module_exit(zorro7xx_scsi_exit); |