| config MIPS |
| bool |
| default y |
| # Horrible source of confusion. Die, die, die ... |
| select EMBEDDED |
| |
| config MIPS64 |
| bool "64-bit kernel" |
| help |
| Select this option if you want to build a 64-bit kernel. You should |
| only select this option if you have hardware that actually has a |
| 64-bit processor and if your application will actually benefit from |
| 64-bit processing, otherwise say N. You must say Y for kernels for |
| SGI IP27 (Origin 200 and 2000) and SGI IP32 (O2). If in doubt say N. |
| |
| config 64BIT |
| def_bool MIPS64 |
| |
| config MIPS32 |
| bool |
| depends on MIPS64 = 'n' |
| default y |
| |
| mainmenu "Linux/MIPS Kernel Configuration" |
| |
| source "init/Kconfig" |
| |
| menu "Machine selection" |
| |
| config MACH_JAZZ |
| bool "Support for the Jazz family of machines" |
| select ARC |
| select ARC32 |
| select GENERIC_ISA_DMA |
| select I8259 |
| select ISA |
| help |
| This a family of machines based on the MIPS R4030 chipset which was |
| used by several vendors to build RISC/os and Windows NT workstations. |
| Members include the Acer PICA, MIPS Magnum 4000, MIPS Millenium and |
| Olivetti M700-10 workstations. |
| |
| config ACER_PICA_61 |
| bool "Support for Acer PICA 1 chipset (EXPERIMENTAL)" |
| depends on MACH_JAZZ && EXPERIMENTAL |
| select DMA_NONCOHERENT |
| help |
| This is a machine with a R4400 133/150 MHz CPU. To compile a Linux |
| kernel that runs on these, say Y here. For details about Linux on |
| the MIPS architecture, check out the Linux/MIPS FAQ on the WWW at |
| <http://www.linux-mips.org/>. |
| |
| config MIPS_MAGNUM_4000 |
| bool "Support for MIPS Magnum 4000" |
| depends on MACH_JAZZ |
| select DMA_NONCOHERENT |
| help |
| This is a machine with a R4000 100 MHz CPU. To compile a Linux |
| kernel that runs on these, say Y here. For details about Linux on |
| the MIPS architecture, check out the Linux/MIPS FAQ on the WWW at |
| <http://www.linux-mips.org/>. |
| |
| config OLIVETTI_M700 |
| bool "Support for Olivetti M700-10" |
| depends on MACH_JAZZ |
| select DMA_NONCOHERENT |
| help |
| This is a machine with a R4000 100 MHz CPU. To compile a Linux |
| kernel that runs on these, say Y here. For details about Linux on |
| the MIPS architecture, check out the Linux/MIPS FAQ on the WWW at |
| <http://www.linux-mips.org/>. |
| |
| config MACH_VR41XX |
| bool "Support for NEC VR41XX-based machines" |
| |
| config NEC_CMBVR4133 |
| bool "Support for NEC CMB-VR4133" |
| depends on MACH_VR41XX |
| select CPU_VR41XX |
| select DMA_NONCOHERENT |
| select IRQ_CPU |
| select HW_HAS_PCI |
| select PCI_VR41XX |
| |
| config ROCKHOPPER |
| bool "Support for Rockhopper baseboard" |
| depends on NEC_CMBVR4133 |
| select I8259 |
| select HAVE_STD_PC_SERIAL_PORT |
| |
| config CASIO_E55 |
| bool "Support for CASIO CASSIOPEIA E-10/15/55/65" |
| depends on MACH_VR41XX |
| select DMA_NONCOHERENT |
| select IRQ_CPU |
| select ISA |
| |
| config IBM_WORKPAD |
| bool "Support for IBM WorkPad z50" |
| depends on MACH_VR41XX |
| select DMA_NONCOHERENT |
| select IRQ_CPU |
| select ISA |
| |
| config TANBAC_TB0226 |
| bool "Support for TANBAC TB0226 (Mbase)" |
| depends on MACH_VR41XX |
| select DMA_NONCOHERENT |
| select HW_HAS_PCI |
| select IRQ_CPU |
| help |
| The TANBAC TB0226 (Mbase) is a MIPS-based platform manufactured by TANBAC. |
| Please refer to <http://www.tanbac.co.jp/> about Mbase. |
| |
| config TANBAC_TB0229 |
| bool "Support for TANBAC TB0229 (VR4131DIMM)" |
| depends on MACH_VR41XX |
| select DMA_NONCOHERENT |
| select HW_HAS_PCI |
| select IRQ_CPU |
| help |
| The TANBAC TB0229 (VR4131DIMM) is a MIPS-based platform manufactured by TANBAC. |
| Please refer to <http://www.tanbac.co.jp/> about VR4131DIMM. |
| |
| config VICTOR_MPC30X |
| bool "Support for Victor MP-C303/304" |
| select DMA_NONCOHERENT |
| select HW_HAS_PCI |
| select IRQ_CPU |
| depends on MACH_VR41XX |
| |
| config ZAO_CAPCELLA |
| bool "Support for ZAO Networks Capcella" |
| depends on MACH_VR41XX |
| select DMA_NONCOHERENT |
| select HW_HAS_PCI |
| select IRQ_CPU |
| |
| config PCI_VR41XX |
| bool "Add PCI control unit support of NEC VR4100 series" |
| depends on MACH_VR41XX && PCI |
| |
| config VRC4171 |
| tristate "Add NEC VRC4171 companion chip support" |
| depends on MACH_VR41XX && ISA |
| ---help--- |
| The NEC VRC4171/4171A is a companion chip for NEC VR4111/VR4121. |
| |
| config VRC4173 |
| tristate "Add NEC VRC4173 companion chip support" |
| depends on MACH_VR41XX && PCI_VR41XX |
| ---help--- |
| The NEC VRC4173 is a companion chip for NEC VR4122/VR4131. |
| |
| config TOSHIBA_JMR3927 |
| bool "Support for Toshiba JMR-TX3927 board" |
| depends on MIPS32 |
| select DMA_NONCOHERENT |
| select HW_HAS_PCI |
| select SWAP_IO_SPACE |
| |
| config MIPS_COBALT |
| bool "Support for Cobalt Server (EXPERIMENTAL)" |
| depends on EXPERIMENTAL |
| select DMA_NONCOHERENT |
| select HW_HAS_PCI |
| select I8259 |
| select IRQ_CPU |
| |
| config MACH_DECSTATION |
| bool "Support for DECstations" |
| select BOOT_ELF32 |
| select DMA_NONCOHERENT |
| select IRQ_CPU |
| depends on MIPS32 || EXPERIMENTAL |
| ---help--- |
| This enables support for DEC's MIPS based workstations. For details |
| see the Linux/MIPS FAQ on <http://www.linux-mips.org/> and the |
| DECstation porting pages on <http://decstation.unix-ag.org/>. |
| |
| If you have one of the following DECstation Models you definitely |
| want to choose R4xx0 for the CPU Type: |
| |
| DECstation 5000/50 |
| DECstation 5000/150 |
| DECstation 5000/260 |
| DECsystem 5900/260 |
| |
| otherwise choose R3000. |
| |
| config MIPS_EV64120 |
| bool "Support for Galileo EV64120 Evaluation board (EXPERIMENTAL)" |
| depends on EXPERIMENTAL |
| select DMA_NONCOHERENT |
| select HW_HAS_PCI |
| select MIPS_GT64120 |
| help |
| This is an evaluation board based on the Galileo GT-64120 |
| single-chip system controller that contains a MIPS R5000 compatible |
| core running at 75/100MHz. Their website is located at |
| <http://www.marvell.com/>. Say Y here if you wish to build a |
| kernel for this platform. |
| |
| config EVB_PCI1 |
| bool "Enable Second PCI (PCI1)" |
| depends on MIPS_EV64120 |
| |
| config MIPS_EV96100 |
| bool "Support for Galileo EV96100 Evaluation board (EXPERIMENTAL)" |
| depends on EXPERIMENTAL |
| select DMA_NONCOHERENT |
| select HW_HAS_PCI |
| select IRQ_CPU |
| select MIPS_GT96100 |
| select RM7000_CPU_SCACHE |
| select SWAP_IO_SPACE |
| help |
| This is an evaluation board based on the Galileo GT-96100 LAN/WAN |
| communications controllers containing a MIPS R5000 compatible core |
| running at 83MHz. Their website is <http://www.marvell.com/>. Say Y |
| here if you wish to build a kernel for this platform. |
| |
| config MIPS_IVR |
| bool "Support for Globespan IVR board" |
| select DMA_NONCOHERENT |
| select HW_HAS_PCI |
| help |
| This is an evaluation board built by Globespan to showcase thir |
| iVR (Internet Video Recorder) design. It utilizes a QED RM5231 |
| R5000 MIPS core. More information can be found out their website |
| located at <http://www.globespan.net/>. Say Y here if you wish to |
| build a kernel for this platform. |
| |
| config LASAT |
| bool "Support for LASAT Networks platforms" |
| select DMA_NONCOHERENT |
| select HW_HAS_PCI |
| select MIPS_GT64120 |
| select R5000_CPU_SCACHE |
| |
| config PICVUE |
| tristate "PICVUE LCD display driver" |
| depends on LASAT |
| |
| config PICVUE_PROC |
| tristate "PICVUE LCD display driver /proc interface" |
| depends on PICVUE |
| |
| config DS1603 |
| bool "DS1603 RTC driver" |
| depends on LASAT |
| |
| config LASAT_SYSCTL |
| bool "LASAT sysctl interface" |
| depends on LASAT |
| |
| config MIPS_ITE8172 |
| bool "Support for ITE 8172G board" |
| select DMA_NONCOHERENT |
| select HW_HAS_PCI |
| help |
| Ths is an evaluation board made by ITE <http://www.ite.com.tw/> |
| with ATX form factor that utilizes a MIPS R5000 to work with its |
| ITE8172G companion internet appliance chip. The MIPS core can be |
| either a NEC Vr5432 or QED RM5231. Say Y here if you wish to build |
| a kernel for this platform. |
| |
| config IT8172_REVC |
| bool "Support for older IT8172 (Rev C)" |
| depends on MIPS_ITE8172 |
| help |
| Say Y here to support the older, Revision C version of the Integrated |
| Technology Express, Inc. ITE8172 SBC. Vendor page at |
| <http://www.ite.com.tw/ia/brief_it8172bsp.htm>; picture of the |
| board at <http://www.mvista.com/partners/semiconductor/ite.html>. |
| |
| config MIPS_ATLAS |
| bool "Support for MIPS Atlas board" |
| select BOOT_ELF32 |
| select DMA_NONCOHERENT |
| select HW_HAS_PCI |
| select MIPS_GT64120 |
| select SWAP_IO_SPACE |
| help |
| This enables support for the QED R5231-based MIPS Atlas evaluation |
| board. |
| |
| config MIPS_MALTA |
| bool "Support for MIPS Malta board" |
| select BOOT_ELF32 |
| select HAVE_STD_PC_SERIAL_PORT |
| select DMA_NONCOHERENT |
| select GENERIC_ISA_DMA |
| select HW_HAS_PCI |
| select I8259 |
| select MIPS_GT64120 |
| select SWAP_IO_SPACE |
| help |
| This enables support for the VR5000-based MIPS Malta evaluation |
| board. |
| |
| config MIPS_SEAD |
| bool "Support for MIPS SEAD board (EXPERIMENTAL)" |
| depends on EXPERIMENTAL |
| select IRQ_CPU |
| select DMA_NONCOHERENT |
| |
| config MOMENCO_OCELOT |
| bool "Support for Momentum Ocelot board" |
| select DMA_NONCOHERENT |
| select HW_HAS_PCI |
| select IRQ_CPU |
| select IRQ_CPU_RM7K |
| select MIPS_GT64120 |
| select RM7000_CPU_SCACHE |
| select SWAP_IO_SPACE |
| help |
| The Ocelot is a MIPS-based Single Board Computer (SBC) made by |
| Momentum Computer <http://www.momenco.com/>. |
| |
| config MOMENCO_OCELOT_G |
| bool "Support for Momentum Ocelot-G board" |
| select DMA_NONCOHERENT |
| select HW_HAS_PCI |
| select IRQ_CPU |
| select IRQ_CPU_RM7K |
| select PCI_MARVELL |
| select RM7000_CPU_SCACHE |
| select SWAP_IO_SPACE |
| help |
| The Ocelot is a MIPS-based Single Board Computer (SBC) made by |
| Momentum Computer <http://www.momenco.com/>. |
| |
| config MOMENCO_OCELOT_C |
| bool "Support for Momentum Ocelot-C board" |
| select DMA_NONCOHERENT |
| select HW_HAS_PCI |
| select IRQ_CPU |
| select IRQ_MV64340 |
| select PCI_MARVELL |
| select RM7000_CPU_SCACHE |
| select SWAP_IO_SPACE |
| help |
| The Ocelot is a MIPS-based Single Board Computer (SBC) made by |
| Momentum Computer <http://www.momenco.com/>. |
| |
| config MOMENCO_OCELOT_3 |
| bool "Support for Momentum Ocelot-3 board" |
| select BOOT_ELF32 |
| select DMA_NONCOHERENT |
| select HW_HAS_PCI |
| select IRQ_CPU |
| select IRQ_CPU_RM7K |
| select IRQ_MV64340 |
| select PCI_MARVELL |
| select RM7000_CPU_SCACHE |
| select SWAP_IO_SPACE |
| help |
| The Ocelot-3 is based off Discovery III System Controller and |
| PMC-Sierra Rm79000 core. |
| |
| config MOMENCO_JAGUAR_ATX |
| bool "Support for Momentum Jaguar board" |
| select BOOT_ELF32 |
| select DMA_NONCOHERENT |
| select HW_HAS_PCI |
| select IRQ_CPU |
| select IRQ_CPU_RM7K |
| select IRQ_MV64340 |
| select LIMITED_DMA |
| select PCI_MARVELL |
| select RM7000_CPU_SCACHE |
| select SWAP_IO_SPACE |
| help |
| The Jaguar ATX is a MIPS-based Single Board Computer (SBC) made by |
| Momentum Computer <http://www.momenco.com/>. |
| |
| config JAGUAR_DMALOW |
| bool "Low DMA Mode" |
| depends on MOMENCO_JAGUAR_ATX |
| help |
| Select to Y if jump JP5 is set on your board, N otherwise. Normally |
| the jumper is set, so if you feel unsafe, just say Y. |
| |
| config PMC_YOSEMITE |
| bool "Support for PMC-Sierra Yosemite eval board" |
| select DMA_COHERENT |
| select HW_HAS_PCI |
| select IRQ_CPU |
| select IRQ_CPU_RM7K |
| select IRQ_CPU_RM9K |
| select SWAP_IO_SPACE |
| help |
| Yosemite is an evaluation board for the RM9000x2 processor |
| manufactured by PMC-Sierra |
| |
| config HYPERTRANSPORT |
| bool "Hypertransport Support for PMC-Sierra Yosemite" |
| depends on PMC_YOSEMITE |
| |
| config DDB5074 |
| bool "Support for NEC DDB Vrc-5074 (EXPERIMENTAL)" |
| depends on EXPERIMENTAL |
| select DMA_NONCOHERENT |
| select HAVE_STD_PC_SERIAL_PORT |
| select HW_HAS_PCI |
| select IRQ_CPU |
| select I8259 |
| select ISA |
| help |
| This enables support for the VR5000-based NEC DDB Vrc-5074 |
| evaluation board. |
| |
| config DDB5476 |
| bool "Support for NEC DDB Vrc-5476" |
| select DMA_NONCOHERENT |
| select HAVE_STD_PC_SERIAL_PORT |
| select HW_HAS_PCI |
| select IRQ_CPU |
| select I8259 |
| select ISA |
| help |
| This enables support for the R5432-based NEC DDB Vrc-5476 |
| evaluation board. |
| |
| Features : kernel debugging, serial terminal, NFS root fs, on-board |
| ether port USB, AC97, PCI, PCI VGA card & framebuffer console, |
| IDE controller, PS2 keyboard, PS2 mouse, etc. |
| |
| config DDB5477 |
| bool "Support for NEC DDB Vrc-5477" |
| select DMA_NONCOHERENT |
| select HW_HAS_PCI |
| select I8259 |
| select IRQ_CPU |
| help |
| This enables support for the R5432-based NEC DDB Vrc-5477, |
| or Rockhopper/SolutionGear boards with R5432/R5500 CPUs. |
| |
| Features : kernel debugging, serial terminal, NFS root fs, on-board |
| ether port USB, AC97, PCI, etc. |
| |
| config DDB5477_BUS_FREQUENCY |
| int "bus frequency (in kHZ, 0 for auto-detect)" |
| depends on DDB5477 |
| default 0 |
| |
| config NEC_OSPREY |
| bool "Support for NEC Osprey board" |
| select DMA_NONCOHERENT |
| select IRQ_CPU |
| |
| config SGI_IP22 |
| bool "Support for SGI IP22 (Indy/Indigo2)" |
| select ARC |
| select ARC32 |
| select BOOT_ELF32 |
| select DMA_NONCOHERENT |
| select IP22_CPU_SCACHE |
| select IRQ_CPU |
| select SWAP_IO_SPACE |
| help |
| This are the SGI Indy, Challenge S and Indigo2, as well as certain |
| OEM variants like the Tandem CMN B006S. To compile a Linux kernel |
| that runs on these, say Y here. |
| |
| config SGI_IP27 |
| bool "Support for SGI IP27 (Origin200/2000)" |
| depends on MIPS64 |
| select ARC |
| select ARC64 |
| select DMA_IP27 |
| select HW_HAS_PCI |
| select PCI_DOMAINS |
| help |
| This are the SGI Origin 200, Origin 2000 and Onyx 2 Graphics |
| workstations. To compile a Linux kernel that runs on these, say Y |
| here. |
| |
| #config SGI_SN0_XXL |
| # bool "IP27 XXL" |
| # depends on SGI_IP27 |
| # This options adds support for userspace processes upto 16TB size. |
| # Normally the limit is just .5TB. |
| |
| config SGI_SN0_N_MODE |
| bool "IP27 N-Mode" |
| depends on SGI_IP27 |
| help |
| The nodes of Origin 200, Origin 2000 and Onyx 2 systems can be |
| configured in either N-Modes which allows for more nodes or M-Mode |
| which allows for more memory. Your system is most probably |
| running in M-Mode, so you should say N here. |
| |
| config ARCH_DISCONTIGMEM_ENABLE |
| bool |
| default y if SGI_IP27 |
| help |
| Say Y to upport efficient handling of discontiguous physical memory, |
| for architectures which are either NUMA (Non-Uniform Memory Access) |
| or have huge holes in the physical address space for other reasons. |
| See <file:Documentation/vm/numa> for more. |
| |
| config NUMA |
| bool "NUMA Support" |
| depends on SGI_IP27 |
| help |
| Say Y to compile the kernel to support NUMA (Non-Uniform Memory |
| Access). This option is for configuring high-end multiprocessor |
| server machines. If in doubt, say N. |
| |
| config MAPPED_KERNEL |
| bool "Mapped kernel support" |
| depends on SGI_IP27 |
| help |
| Change the way a Linux kernel is loaded into memory on a MIPS64 |
| machine. This is required in order to support text replication and |
| NUMA. If you need to understand it, read the source code. |
| |
| config REPLICATE_KTEXT |
| bool "Kernel text replication support" |
| depends on SGI_IP27 |
| help |
| Say Y here to enable replicating the kernel text across multiple |
| nodes in a NUMA cluster. This trades memory for speed. |
| |
| config REPLICATE_EXHANDLERS |
| bool "Exception handler replication support" |
| depends on SGI_IP27 |
| help |
| Say Y here to enable replicating the kernel exception handlers |
| across multiple nodes in a NUMA cluster. This trades memory for |
| speed. |
| |
| config SGI_IP32 |
| bool "Support for SGI IP32 (O2) (EXPERIMENTAL)" |
| depends on MIPS64 && EXPERIMENTAL |
| select ARC |
| select ARC32 |
| select BOOT_ELF32 |
| select OWN_DMA |
| select DMA_IP32 |
| select DMA_NONCOHERENT |
| select HW_HAS_PCI |
| select R5000_CPU_SCACHE |
| select RM7000_CPU_SCACHE |
| help |
| If you want this kernel to run on SGI O2 workstation, say Y here. |
| |
| config SOC_AU1X00 |
| depends on MIPS32 |
| bool "Support for AMD/Alchemy Au1X00 SOCs" |
| |
| choice |
| prompt "Au1X00 SOC Type" |
| depends on SOC_AU1X00 |
| help |
| Say Y here to enable support for one of three AMD/Alchemy |
| SOCs. For additional documentation see www.amd.com. |
| |
| config SOC_AU1000 |
| bool "SOC_AU1000" |
| config SOC_AU1100 |
| bool "SOC_AU1100" |
| config SOC_AU1500 |
| bool "SOC_AU1500" |
| config SOC_AU1550 |
| bool "SOC_AU1550" |
| |
| endchoice |
| |
| choice |
| prompt "AMD/Alchemy Au1x00 board support" |
| depends on SOC_AU1X00 |
| help |
| These are evaluation boards built by AMD/Alchemy to |
| showcase their Au1X00 Internet Edge Processors. The SOC design |
| is based on the MIPS32 architecture running at 266/400/500MHz |
| with many integrated peripherals. Further information can be |
| found at their website, <http://www.amd.com/>. Say Y here if you |
| wish to build a kernel for this platform. |
| |
| config MIPS_PB1000 |
| bool "PB1000 board" |
| depends on SOC_AU1000 |
| select DMA_NONCOHERENT |
| select HW_HAS_PCI |
| select SWAP_IO_SPACE |
| |
| config MIPS_PB1100 |
| bool "PB1100 board" |
| depends on SOC_AU1100 |
| select DMA_NONCOHERENT |
| select HW_HAS_PCI |
| select SWAP_IO_SPACE |
| |
| config MIPS_PB1500 |
| bool "PB1500 board" |
| depends on SOC_AU1500 |
| select DMA_COHERENT |
| select HW_HAS_PCI |
| |
| config MIPS_PB1550 |
| bool "PB1550 board" |
| depends on SOC_AU1550 |
| select DMA_COHERENT |
| select HW_HAS_PCI |
| select MIPS_DISABLE_OBSOLETE_IDE |
| |
| config MIPS_DB1000 |
| bool "DB1000 board" |
| depends on SOC_AU1000 |
| select DMA_NONCOHERENT |
| select HW_HAS_PCI |
| |
| config MIPS_DB1100 |
| bool "DB1100 board" |
| depends on SOC_AU1100 |
| select DMA_NONCOHERENT |
| |
| config MIPS_DB1500 |
| bool "DB1500 board" |
| depends on SOC_AU1500 |
| select DMA_COHERENT |
| select HW_HAS_PCI |
| select MIPS_DISABLE_OBSOLETE_IDE |
| |
| config MIPS_DB1550 |
| bool "DB1550 board" |
| depends on SOC_AU1550 |
| select HW_HAS_PCI |
| select DMA_COHERENT |
| select MIPS_DISABLE_OBSOLETE_IDE |
| |
| config MIPS_BOSPORUS |
| bool "Bosporus board" |
| depends on SOC_AU1500 |
| select DMA_NONCOHERENT |
| |
| config MIPS_MIRAGE |
| bool "Mirage board" |
| depends on SOC_AU1500 |
| select DMA_NONCOHERENT |
| |
| config MIPS_XXS1500 |
| bool "MyCable XXS1500 board" |
| depends on SOC_AU1500 |
| select DMA_NONCOHERENT |
| |
| config MIPS_MTX1 |
| bool "4G Systems MTX-1 board" |
| depends on SOC_AU1500 |
| select HW_HAS_PCI |
| select DMA_NONCOHERENT |
| |
| endchoice |
| |
| config SIBYTE_SB1xxx_SOC |
| bool "Support for Broadcom BCM1xxx SOCs (EXPERIMENTAL)" |
| depends on EXPERIMENTAL |
| select BOOT_ELF32 |
| select DMA_COHERENT |
| select SWAP_IO_SPACE |
| |
| choice |
| prompt "BCM1xxx SOC-based board" |
| depends on SIBYTE_SB1xxx_SOC |
| default SIBYTE_SWARM |
| help |
| Enable support for boards based on the SiByte line of SOCs |
| from Broadcom. There are configurations for the known |
| evaluation boards, or you can choose "Other" and add your |
| own board support code. |
| |
| config SIBYTE_SWARM |
| bool "BCM91250A-SWARM" |
| select SIBYTE_SB1250 |
| |
| config SIBYTE_SENTOSA |
| bool "BCM91250E-Sentosa" |
| select SIBYTE_SB1250 |
| |
| config SIBYTE_RHONE |
| bool "BCM91125E-Rhone" |
| select SIBYTE_BCM1125H |
| |
| config SIBYTE_CARMEL |
| bool "BCM91120x-Carmel" |
| select SIBYTE_BCM1120 |
| |
| config SIBYTE_PTSWARM |
| bool "BCM91250PT-PTSWARM" |
| select SIBYTE_SB1250 |
| |
| config SIBYTE_LITTLESUR |
| bool "BCM91250C2-LittleSur" |
| select SIBYTE_SB1250 |
| |
| config SIBYTE_CRHINE |
| bool "BCM91120C-CRhine" |
| select SIBYTE_BCM1120 |
| |
| config SIBYTE_CRHONE |
| bool "BCM91125C-CRhone" |
| select SIBYTE_BCM1125 |
| |
| config SIBYTE_UNKNOWN |
| bool "Other" |
| |
| endchoice |
| |
| config SIBYTE_BOARD |
| bool |
| depends on SIBYTE_SB1xxx_SOC && !SIBYTE_UNKNOWN |
| default y |
| |
| choice |
| prompt "BCM1xxx SOC Type" |
| depends on SIBYTE_UNKNOWN |
| default SIBYTE_UNK_BCM1250 |
| help |
| Since you haven't chosen a known evaluation board from |
| Broadcom, you must explicitly pick the SOC this kernel is |
| targetted for. |
| |
| config SIBYTE_UNK_BCM1250 |
| bool "BCM1250" |
| select SIBYTE_SB1250 |
| |
| config SIBYTE_UNK_BCM1120 |
| bool "BCM1120" |
| select SIBYTE_BCM1120 |
| |
| config SIBYTE_UNK_BCM1125 |
| bool "BCM1125" |
| select SIBYTE_BCM1125 |
| |
| config SIBYTE_UNK_BCM1125H |
| bool "BCM1125H" |
| select SIBYTE_BCM1125H |
| |
| endchoice |
| |
| config SIBYTE_SB1250 |
| bool |
| select HW_HAS_PCI |
| |
| config SIBYTE_BCM1120 |
| bool |
| select SIBYTE_BCM112X |
| |
| config SIBYTE_BCM1125 |
| bool |
| select HW_HAS_PCI |
| select SIBYTE_BCM112X |
| |
| config SIBYTE_BCM1125H |
| bool |
| select HW_HAS_PCI |
| select SIBYTE_BCM112X |
| |
| config SIBYTE_BCM112X |
| bool |
| |
| choice |
| prompt "SiByte SOC Stepping" |
| depends on SIBYTE_SB1xxx_SOC |
| |
| config CPU_SB1_PASS_1 |
| bool "1250 Pass1" |
| depends on SIBYTE_SB1250 |
| select CPU_HAS_PREFETCH |
| |
| config CPU_SB1_PASS_2_1250 |
| bool "1250 An" |
| depends on SIBYTE_SB1250 |
| select CPU_SB1_PASS_2 |
| help |
| Also called BCM1250 Pass 2 |
| |
| config CPU_SB1_PASS_2_2 |
| bool "1250 Bn" |
| depends on SIBYTE_SB1250 |
| select CPU_HAS_PREFETCH |
| help |
| Also called BCM1250 Pass 2.2 |
| |
| config CPU_SB1_PASS_4 |
| bool "1250 Cn" |
| depends on SIBYTE_SB1250 |
| select CPU_HAS_PREFETCH |
| help |
| Also called BCM1250 Pass 3 |
| |
| config CPU_SB1_PASS_2_112x |
| bool "112x Hybrid" |
| depends on SIBYTE_BCM112X |
| select CPU_SB1_PASS_2 |
| |
| config CPU_SB1_PASS_3 |
| bool "112x An" |
| depends on SIBYTE_BCM112X |
| select CPU_HAS_PREFETCH |
| |
| endchoice |
| |
| config CPU_SB1_PASS_2 |
| bool |
| |
| config SIBYTE_HAS_LDT |
| bool |
| depends on PCI && (SIBYTE_SB1250 || SIBYTE_BCM1125H) |
| default y |
| |
| config SIMULATION |
| bool "Running under simulation" |
| depends on SIBYTE_SB1xxx_SOC |
| help |
| Build a kernel suitable for running under the GDB simulator. |
| Primarily adjusts the kernel's notion of time. |
| |
| config SIBYTE_CFE |
| bool "Booting from CFE" |
| depends on SIBYTE_SB1xxx_SOC |
| help |
| Make use of the CFE API for enumerating available memory, |
| controlling secondary CPUs, and possibly console output. |
| |
| config SIBYTE_CFE_CONSOLE |
| bool "Use firmware console" |
| depends on SIBYTE_CFE |
| help |
| Use the CFE API's console write routines during boot. Other console |
| options (VT console, sb1250 duart console, etc.) should not be |
| configured. |
| |
| config SIBYTE_STANDALONE |
| bool |
| depends on SIBYTE_SB1xxx_SOC && !SIBYTE_CFE |
| default y |
| |
| config SIBYTE_STANDALONE_RAM_SIZE |
| int "Memory size (in megabytes)" |
| depends on SIBYTE_STANDALONE |
| default "32" |
| |
| config SIBYTE_BUS_WATCHER |
| bool "Support for Bus Watcher statistics" |
| depends on SIBYTE_SB1xxx_SOC |
| help |
| Handle and keep statistics on the bus error interrupts (COR_ECC, |
| BAD_ECC, IO_BUS). |
| |
| config SIBYTE_BW_TRACE |
| bool "Capture bus trace before bus error" |
| depends on SIBYTE_BUS_WATCHER |
| help |
| Run a continuous bus trace, dumping the raw data as soon as |
| a ZBbus error is detected. Cannot work if ZBbus profiling |
| is turned on, and also will interfere with JTAG-based trace |
| buffer activity. Raw buffer data is dumped to console, and |
| must be processed off-line. |
| |
| config SIBYTE_SB1250_PROF |
| bool "Support for SB1/SOC profiling - SB1/SCD perf counters" |
| depends on SIBYTE_SB1xxx_SOC |
| |
| config SIBYTE_TBPROF |
| bool "Support for ZBbus profiling" |
| depends on SIBYTE_SB1xxx_SOC |
| |
| config SNI_RM200_PCI |
| bool "Support for SNI RM200 PCI" |
| select ARC |
| select ARC32 |
| select BOOT_ELF32 |
| select DMA_NONCOHERENT |
| select GENERIC_ISA_DMA |
| select HAVE_STD_PC_SERIAL_PORT |
| select HW_HAS_PCI |
| select I8259 |
| select ISA |
| help |
| The SNI RM200 PCI was a MIPS-based platform manufactured by Siemens |
| Nixdorf Informationssysteme (SNI), parent company of Pyramid |
| Technology and now in turn merged with Fujitsu. Say Y here to |
| support this machine type. |
| |
| config TOSHIBA_RBTX4927 |
| bool "Support for Toshiba TBTX49[23]7 board" |
| depends on MIPS32 |
| select DMA_NONCOHERENT |
| select HAS_TXX9_SERIAL |
| select HW_HAS_PCI |
| select I8259 |
| select ISA |
| select SWAP_IO_SPACE |
| help |
| This Toshiba board is based on the TX4927 processor. Say Y here to |
| support this machine type |
| |
| config TOSHIBA_FPCIB0 |
| bool "FPCIB0 Backplane Support" |
| depends on TOSHIBA_RBTX4927 |
| |
| config RWSEM_GENERIC_SPINLOCK |
| bool |
| default y |
| |
| config RWSEM_XCHGADD_ALGORITHM |
| bool |
| |
| config GENERIC_CALIBRATE_DELAY |
| bool |
| default y |
| |
| config HAVE_DEC_LOCK |
| bool |
| default y |
| |
| # |
| # Select some configuration options automatically based on user selections. |
| # |
| config ARC |
| bool |
| depends on SNI_RM200_PCI || SGI_IP32 || SGI_IP27 || SGI_IP22 || MIPS_MAGNUM_4000 || OLIVETTI_M700 || ACER_PICA_61 |
| default y |
| |
| config DMA_COHERENT |
| bool |
| |
| config DMA_IP27 |
| bool |
| |
| config DMA_NONCOHERENT |
| bool |
| |
| config EARLY_PRINTK |
| bool |
| depends on MACH_DECSTATION |
| default y |
| |
| config GENERIC_ISA_DMA |
| bool |
| depends on SNI_RM200_PCI || MIPS_MAGNUM_4000 || OLIVETTI_M700 || ACER_PICA_61 || MIPS_MALTA |
| default y |
| |
| config I8259 |
| bool |
| depends on SNI_RM200_PCI || DDB5477 || DDB5476 || DDB5074 || MACH_JAZZ || MIPS_MALTA || MIPS_COBALT |
| default y |
| |
| config LIMITED_DMA |
| bool |
| select HIGHMEM |
| |
| config MIPS_BONITO64 |
| bool |
| depends on MIPS_ATLAS || MIPS_MALTA |
| default y |
| |
| config MIPS_MSC |
| bool |
| depends on MIPS_ATLAS || MIPS_MALTA |
| default y |
| |
| config MIPS_NILE4 |
| bool |
| depends on LASAT |
| default y |
| |
| config MIPS_DISABLE_OBSOLETE_IDE |
| bool |
| |
| config CPU_LITTLE_ENDIAN |
| bool "Generate little endian code" |
| default y if ACER_PICA_61 || CASIO_E55 || DDB5074 || DDB5476 || DDB5477 || MACH_DECSTATION || IBM_WORKPAD || LASAT || MIPS_COBALT || MIPS_ITE8172 || MIPS_IVR || SOC_AU1X00 || NEC_OSPREY || OLIVETTI_M700 || SNI_RM200_PCI || VICTOR_MPC30X || ZAO_CAPCELLA |
| default n if MIPS_EV64120 || MIPS_EV96100 || MOMENCO_OCELOT || MOMENCO_OCELOT_G || SGI_IP22 || SGI_IP27 || SGI_IP32 || TOSHIBA_JMR3927 |
| help |
| Some MIPS machines can be configured for either little or big endian |
| byte order. These modes require different kernels. Say Y if your |
| machine is little endian, N if it's a big endian machine. |
| |
| config IRQ_CPU |
| bool |
| |
| config IRQ_CPU_RM7K |
| bool |
| |
| config IRQ_MV64340 |
| bool |
| |
| config DDB5XXX_COMMON |
| bool |
| depends on DDB5074 || DDB5476 || DDB5477 |
| default y |
| |
| config MIPS_BOARDS_GEN |
| bool |
| depends on MIPS_ATLAS || MIPS_MALTA || MIPS_SEAD |
| default y |
| |
| config MIPS_GT64111 |
| bool |
| depends on MIPS_COBALT |
| default y |
| |
| config MIPS_GT64120 |
| bool |
| depends on MIPS_EV64120 || MIPS_EV96100 || LASAT || MIPS_ATLAS || MIPS_MALTA || MOMENCO_OCELOT |
| default y |
| |
| config MIPS_TX3927 |
| bool |
| depends on TOSHIBA_JMR3927 |
| select HAS_TXX9_SERIAL |
| default y |
| |
| config PCI_MARVELL |
| bool |
| |
| config ITE_BOARD_GEN |
| bool |
| depends on MIPS_IVR || MIPS_ITE8172 |
| default y |
| |
| config SWAP_IO_SPACE |
| bool |
| |
| # |
| # Unfortunately not all GT64120 systems run the chip at the same clock. |
| # As the user for the clock rate and try to minimize the available options. |
| # |
| choice |
| prompt "Galileo Chip Clock" |
| #default SYSCLK_83 if MIPS_EV64120 |
| depends on MIPS_EV64120 || MOMENCO_OCELOT || MOMENCO_OCELOT_G |
| default SYSCLK_83 if MIPS_EV64120 |
| default SYSCLK_100 if MOMENCO_OCELOT || MOMENCO_OCELOT_G |
| |
| config SYSCLK_75 |
| bool "75" if MIPS_EV64120 |
| |
| config SYSCLK_83 |
| bool "83.3" if MIPS_EV64120 |
| |
| config SYSCLK_100 |
| bool "100" if MIPS_EV64120 || MOMENCO_OCELOT || MOMENCO_OCELOT_G |
| |
| endchoice |
| |
| config AU1X00_USB_DEVICE |
| bool |
| depends on MIPS_PB1500 || MIPS_PB1100 || MIPS_PB1000 |
| default n |
| |
| config MIPS_GT96100 |
| bool |
| depends on MIPS_EV96100 |
| default y |
| help |
| Say Y here to support the Galileo Technology GT96100 communications |
| controller card. There is a web page at <http://www.galileot.com/>. |
| |
| config IT8172_CIR |
| bool |
| depends on MIPS_ITE8172 || MIPS_IVR |
| default y |
| |
| config IT8712 |
| bool |
| depends on MIPS_ITE8172 |
| default y |
| |
| config BOOT_ELF32 |
| bool |
| depends on MACH_DECSTATION || MIPS_ATLAS || MIPS_MALTA || MOMENCO_JAGUAR_ATX || MOMENCO_OCELOT_3 || SIBYTE_SB1xxx_SOC || SGI_IP32 || SGI_IP22 || SNI_RM200_PCI |
| default y |
| |
| config MIPS_L1_CACHE_SHIFT |
| int |
| default "4" if MACH_DECSTATION |
| default "7" if SGI_IP27 |
| default "5" |
| |
| config ARC32 |
| bool |
| depends on MACH_JAZZ || SNI_RM200_PCI || SGI_IP22 || SGI_IP32 |
| default y |
| |
| config HAVE_STD_PC_SERIAL_PORT |
| bool |
| |
| config VR4181 |
| bool |
| depends on NEC_OSPREY |
| default y |
| |
| config ARC_CONSOLE |
| bool "ARC console support" |
| depends on SGI_IP22 || SNI_RM200_PCI |
| |
| config ARC_MEMORY |
| bool |
| depends on MACH_JAZZ || SNI_RM200_PCI || SGI_IP32 |
| default y |
| |
| config ARC_PROMLIB |
| bool |
| depends on MACH_JAZZ || SNI_RM200_PCI || SGI_IP22 || SGI_IP32 |
| default y |
| |
| config ARC64 |
| bool |
| depends on SGI_IP27 |
| default y |
| |
| config BOOT_ELF64 |
| bool |
| depends on SGI_IP27 |
| default y |
| |
| #config MAPPED_PCI_IO y |
| # bool |
| # depends on SGI_IP27 |
| # default y |
| |
| config QL_ISP_A64 |
| bool |
| depends on SGI_IP27 |
| default y |
| |
| config TOSHIBA_BOARDS |
| bool |
| depends on TOSHIBA_JMR3927 || TOSHIBA_RBTX4927 |
| default y |
| |
| endmenu |
| |
| menu "CPU selection" |
| |
| choice |
| prompt "CPU type" |
| default CPU_R4X00 |
| |
| config CPU_MIPS32 |
| bool "MIPS32" |
| |
| config CPU_MIPS64 |
| bool "MIPS64" |
| |
| config CPU_R3000 |
| bool "R3000" |
| depends on MIPS32 |
| help |
| Please make sure to pick the right CPU type. Linux/MIPS is not |
| designed to be generic, i.e. Kernels compiled for R3000 CPUs will |
| *not* work on R4000 machines and vice versa. However, since most |
| of the supported machines have an R4000 (or similar) CPU, R4x00 |
| might be a safe bet. If the resulting kernel does not work, |
| try to recompile with R3000. |
| |
| config CPU_TX39XX |
| bool "R39XX" |
| depends on MIPS32 |
| |
| config CPU_VR41XX |
| bool "R41xx" |
| help |
| The options selects support for the NEC VR41xx series of processors. |
| Only choose this option if you have one of these processors as a |
| kernel built with this option will not run on any other type of |
| processor or vice versa. |
| |
| config CPU_R4300 |
| bool "R4300" |
| help |
| MIPS Technologies R4300-series processors. |
| |
| config CPU_R4X00 |
| bool "R4x00" |
| help |
| MIPS Technologies R4000-series processors other than 4300, including |
| the R4000, R4400, R4600, and 4700. |
| |
| config CPU_TX49XX |
| bool "R49XX" |
| |
| config CPU_R5000 |
| bool "R5000" |
| help |
| MIPS Technologies R5000-series processors other than the Nevada. |
| |
| config CPU_R5432 |
| bool "R5432" |
| |
| config CPU_R6000 |
| bool "R6000" |
| depends on MIPS32 && EXPERIMENTAL |
| help |
| MIPS Technologies R6000 and R6000A series processors. Note these |
| processors are extremly rare and the support for them is incomplete. |
| |
| config CPU_NEVADA |
| bool "RM52xx" |
| help |
| QED / PMC-Sierra RM52xx-series ("Nevada") processors. |
| |
| config CPU_R8000 |
| bool "R8000" |
| depends on MIPS64 && EXPERIMENTAL |
| help |
| MIPS Technologies R8000 processors. Note these processors are |
| uncommon and the support for them is incomplete. |
| |
| config CPU_R10000 |
| bool "R10000" |
| help |
| MIPS Technologies R10000-series processors. |
| |
| config CPU_RM7000 |
| bool "RM7000" |
| |
| config CPU_RM9000 |
| bool "RM9000" |
| |
| config CPU_SB1 |
| bool "SB1" |
| |
| endchoice |
| |
| choice |
| prompt "Kernel page size" |
| default PAGE_SIZE_4KB |
| |
| config PAGE_SIZE_4KB |
| bool "4kB" |
| help |
| This option select the standard 4kB Linux page size. On some |
| R3000-family processors this is the only available page size. Using |
| 4kB page size will minimize memory consumption and is therefore |
| recommended for low memory systems. |
| |
| config PAGE_SIZE_8KB |
| bool "8kB" |
| depends on EXPERIMENTAL && CPU_R8000 |
| help |
| Using 8kB page size will result in higher performance kernel at |
| the price of higher memory consumption. This option is available |
| only on the R8000 processor. Not that at the time of this writing |
| this option is still high experimental; there are also issues with |
| compatibility of user applications. |
| |
| config PAGE_SIZE_16KB |
| bool "16kB" |
| depends on EXPERIMENTAL && !CPU_R3000 && !CPU_TX39XX |
| help |
| Using 16kB page size will result in higher performance kernel at |
| the price of higher memory consumption. This option is available on |
| all non-R3000 family processor. Not that at the time of this |
| writing this option is still high experimental; there are also |
| issues with compatibility of user applications. |
| |
| config PAGE_SIZE_64KB |
| bool "64kB" |
| depends on EXPERIMENTAL && !CPU_R3000 && !CPU_TX39XX |
| help |
| Using 64kB page size will result in higher performance kernel at |
| the price of higher memory consumption. This option is available on |
| all non-R3000 family processor. Not that at the time of this |
| writing this option is still high experimental; there are also |
| issues with compatibility of user applications. |
| |
| endchoice |
| |
| config BOARD_SCACHE |
| bool |
| |
| config IP22_CPU_SCACHE |
| bool |
| select BOARD_SCACHE |
| |
| config R5000_CPU_SCACHE |
| bool |
| select BOARD_SCACHE |
| |
| config RM7000_CPU_SCACHE |
| bool |
| select BOARD_SCACHE |
| |
| config SIBYTE_DMA_PAGEOPS |
| bool "Use DMA to clear/copy pages" |
| depends on CPU_SB1 |
| help |
| Instead of using the CPU to zero and copy pages, use a Data Mover |
| channel. These DMA channels are otherwise unused by the standard |
| SiByte Linux port. Seems to give a small performance benefit. |
| |
| config CPU_HAS_PREFETCH |
| bool "Enable prefetches" if CPU_SB1 && !CPU_SB1_PASS_2 |
| default y if CPU_MIPS32 || CPU_MIPS64 || CPU_RM7000 || CPU_RM9000 || CPU_R10000 |
| |
| config VTAG_ICACHE |
| bool "Support for Virtual Tagged I-cache" if CPU_MIPS64 || CPU_MIPS32 |
| default y if CPU_SB1 |
| |
| config SB1_PASS_1_WORKAROUNDS |
| bool |
| depends on CPU_SB1_PASS_1 |
| default y |
| |
| config SB1_PASS_2_WORKAROUNDS |
| bool |
| depends on CPU_SB1 && (CPU_SB1_PASS_2_2 || CPU_SB1_PASS_2) |
| default y |
| |
| config SB1_PASS_2_1_WORKAROUNDS |
| bool |
| depends on CPU_SB1 && CPU_SB1_PASS_2 |
| default y |
| |
| config 64BIT_PHYS_ADDR |
| bool "Support for 64-bit physical address space" |
| depends on (CPU_R4X00 || CPU_R5000 || CPU_RM7000 || CPU_RM9000 || CPU_R10000 || CPU_SB1 || CPU_MIPS32 || CPU_MIPS64) && MIPS32 |
| |
| config CPU_ADVANCED |
| bool "Override CPU Options" |
| depends on MIPS32 |
| help |
| Saying yes here allows you to select support for various features |
| your CPU may or may not have. Most people should say N here. |
| |
| config CPU_HAS_LLSC |
| bool "ll/sc Instructions available" if CPU_ADVANCED |
| default y if !CPU_ADVANCED && !CPU_R3000 && !CPU_VR41XX && !CPU_TX39XX |
| help |
| MIPS R4000 series and later provide the Load Linked (ll) |
| and Store Conditional (sc) instructions. More information is |
| available at <http://www.go-ecs.com/mips/miptek1.htm>. |
| |
| Say Y here if your CPU has the ll and sc instructions. Say Y here |
| for better performance, N if you don't know. You must say Y here |
| for multiprocessor machines. |
| |
| config CPU_HAS_LLDSCD |
| bool "lld/scd Instructions available" if CPU_ADVANCED |
| default y if !CPU_ADVANCED && !CPU_R3000 && !CPU_VR41XX && !CPU_TX39XX && !CPU_MIPS32 |
| help |
| Say Y here if your CPU has the lld and scd instructions, the 64-bit |
| equivalents of ll and sc. Say Y here for better performance, N if |
| you don't know. You must say Y here for multiprocessor machines. |
| |
| config CPU_HAS_WB |
| bool "Writeback Buffer available" if CPU_ADVANCED |
| default y if !CPU_ADVANCED && CPU_R3000 && MACH_DECSTATION |
| help |
| Say N here for slightly better performance. You must say Y here for |
| machines which require flushing of write buffers in software. Saying |
| Y is the safe option; N may result in kernel malfunction and crashes. |
| |
| config CPU_HAS_SYNC |
| bool |
| depends on !CPU_R3000 |
| default y |
| |
| # |
| # - Highmem only makes sense for the 32-bit kernel. |
| # - The current highmem code will only work properly on physically indexed |
| # caches such as R3000, SB1, R7000 or those that look like they're virtually |
| # indexed such as R4000/R4400 SC and MC versions or R10000. So for the |
| # moment we protect the user and offer the highmem option only on machines |
| # where it's known to be safe. This will not offer highmem on a few systems |
| # such as MIPS32 and MIPS64 CPUs which may have virtual and physically |
| # indexed CPUs but we're playing safe. |
| # - We should not offer highmem for system of which we already know that they |
| # don't have memory configurations that could gain from highmem support in |
| # the kernel because they don't support configurations with RAM at physical |
| # addresses > 0x20000000. |
| # |
| config HIGHMEM |
| bool "High Memory Support" |
| depends on MIPS32 && (CPU_R3000 || CPU_SB1 || CPU_R7000 || CPU_RM9000 || CPU_R10000) && !(MACH_DECSTATION || MOMENCO_JAGUAR_ATX) |
| |
| config ARCH_FLATMEM_ENABLE |
| def_bool y |
| depends on !NUMA |
| |
| source "mm/Kconfig" |
| |
| config SMP |
| bool "Multi-Processing support" |
| depends on CPU_RM9000 || (SIBYTE_SB1250 && !SIBYTE_STANDALONE) || SGI_IP27 |
| ---help--- |
| This enables support for systems with more than one CPU. If you have |
| a system with only one CPU, like most personal computers, say N. If |
| you have a system with more than one CPU, say Y. |
| |
| If you say N here, the kernel will run on single and multiprocessor |
| machines, but will use only one CPU of a multiprocessor machine. If |
| you say Y here, the kernel will run on many, but not all, |
| singleprocessor machines. On a singleprocessor machine, the kernel |
| will run faster if you say N here. |
| |
| People using multiprocessor machines who say Y here should also say |
| Y to "Enhanced Real Time Clock Support", below. |
| |
| See also the <file:Documentation/smp.txt> and the SMP-HOWTO |
| available at <http://www.tldp.org/docs.html#howto>. |
| |
| If you don't know what to do here, say N. |
| |
| config NR_CPUS |
| int "Maximum number of CPUs (2-64)" |
| range 2 64 |
| depends on SMP |
| default "64" if SGI_IP27 |
| default "2" |
| help |
| This allows you to specify the maximum number of CPUs which this |
| kernel will support. The maximum supported value is 32 for 32-bit |
| kernel and 64 for 64-bit kernels; the minimum value which makes |
| sense is 2. |
| |
| This is purely to save memory - each supported CPU adds |
| approximately eight kilobytes to the kernel image. |
| |
| config PREEMPT |
| bool "Preemptible Kernel" |
| help |
| This option reduces the latency of the kernel when reacting to |
| real-time or interactive events by allowing a low priority process to |
| be preempted even if it is in kernel mode executing a system call. |
| This allows applications to run more reliably even when the system is |
| under load. |
| |
| config RTC_DS1742 |
| bool "DS1742 BRAM/RTC support" |
| depends on TOSHIBA_JMR3927 || TOSHIBA_RBTX4927 |
| |
| config MIPS_INSANE_LARGE |
| bool "Support for large 64-bit configurations" |
| depends on CPU_R10000 && MIPS64 |
| help |
| MIPS R10000 does support a 44 bit / 16TB address space as opposed to |
| previous 64-bit processors which only supported 40 bit / 1TB. If you |
| need processes of more than 1TB virtual address space, say Y here. |
| This will result in additional memory usage, so it is not |
| recommended for normal users. |
| |
| config RWSEM_GENERIC_SPINLOCK |
| bool |
| default y |
| |
| endmenu |
| |
| menu "Bus options (PCI, PCMCIA, EISA, ISA, TC)" |
| |
| config HW_HAS_PCI |
| bool |
| |
| config PCI |
| bool "Support for PCI controller" |
| depends on HW_HAS_PCI |
| help |
| Find out whether you have a PCI motherboard. PCI is the name of a |
| bus system, i.e. the way the CPU talks to the other stuff inside |
| your box. Other bus systems are ISA, EISA, or VESA. If you have PCI, |
| say Y, otherwise N. |
| |
| The PCI-HOWTO, available from |
| <http://www.tldp.org/docs.html#howto>, contains valuable |
| information about which PCI hardware does work under Linux and which |
| doesn't. |
| |
| config PCI_DOMAINS |
| bool |
| depends on PCI |
| |
| source "drivers/pci/Kconfig" |
| |
| # |
| # ISA support is now enabled via select. Too many systems still have the one |
| # or other ISA chip on the board that users don't know about so don't expect |
| # users to choose the right thing ... |
| # |
| config ISA |
| bool |
| |
| config EISA |
| bool "EISA support" |
| depends on SGI_IP22 || SNI_RM200_PCI |
| select ISA |
| ---help--- |
| The Extended Industry Standard Architecture (EISA) bus was |
| developed as an open alternative to the IBM MicroChannel bus. |
| |
| The EISA bus provided some of the features of the IBM MicroChannel |
| bus while maintaining backward compatibility with cards made for |
| the older ISA bus. The EISA bus saw limited use between 1988 and |
| 1995 when it was made obsolete by the PCI bus. |
| |
| Say Y here if you are building a kernel for an EISA-based machine. |
| |
| Otherwise, say N. |
| |
| source "drivers/eisa/Kconfig" |
| |
| config TC |
| bool "TURBOchannel support" |
| depends on MACH_DECSTATION |
| help |
| TurboChannel is a DEC (now Compaq (now HP)) bus for Alpha and MIPS |
| processors. Documentation on writing device drivers for TurboChannel |
| is available at: |
| <http://www.cs.arizona.edu/computer.help/policy/DIGITAL_unix/AA-PS3HD-TET1_html/TITLE.html>. |
| |
| #config ACCESSBUS |
| # bool "Access.Bus support" |
| # depends on TC |
| |
| config MMU |
| bool |
| default y |
| |
| config MCA |
| bool |
| |
| config SBUS |
| bool |
| |
| source "drivers/pcmcia/Kconfig" |
| |
| source "drivers/pci/hotplug/Kconfig" |
| |
| endmenu |
| |
| menu "Executable file formats" |
| |
| source "fs/Kconfig.binfmt" |
| |
| config TRAD_SIGNALS |
| bool |
| default y if MIPS32 |
| |
| config BUILD_ELF64 |
| bool "Use 64-bit ELF format for building" |
| depends on MIPS64 |
| help |
| A 64-bit kernel is usually built using the 64-bit ELF binary object |
| format as it's one that allows arbitrary 64-bit constructs. For |
| kernels that are loaded within the KSEG compatibility segments the |
| 32-bit ELF format can optionally be used resulting in a somewhat |
| smaller binary, but this option is not explicitly supported by the |
| toolchain and since binutils 2.14 it does not even work at all. |
| |
| Say Y to use the 64-bit format or N to use the 32-bit one. |
| |
| If unsure say Y. |
| |
| config BINFMT_IRIX |
| bool "Include IRIX binary compatibility" |
| depends on !CPU_LITTLE_ENDIAN && MIPS32 && BROKEN |
| |
| config MIPS32_COMPAT |
| bool "Kernel support for Linux/MIPS 32-bit binary compatibility" |
| depends on MIPS64 |
| help |
| Select this option if you want Linux/MIPS 32-bit binary |
| compatibility. Since all software available for Linux/MIPS is |
| currently 32-bit you should say Y here. |
| |
| config COMPAT |
| bool |
| depends on MIPS32_COMPAT |
| default y |
| |
| config MIPS32_O32 |
| bool "Kernel support for o32 binaries" |
| depends on MIPS32_COMPAT |
| help |
| Select this option if you want to run o32 binaries. These are pure |
| 32-bit binaries as used by the 32-bit Linux/MIPS port. Most of |
| existing binaries are in this format. |
| |
| If unsure, say Y. |
| |
| config MIPS32_N32 |
| bool "Kernel support for n32 binaries" |
| depends on MIPS32_COMPAT |
| help |
| Select this option if you want to run n32 binaries. These are |
| 64-bit binaries using 32-bit quantities for addressing and certain |
| data that would normally be 64-bit. They are used in special |
| cases. |
| |
| If unsure, say N. |
| |
| config BINFMT_ELF32 |
| bool |
| default y if MIPS32_O32 || MIPS32_N32 |
| |
| config PM |
| bool "Power Management support (EXPERIMENTAL)" |
| depends on EXPERIMENTAL && MACH_AU1X00 |
| |
| endmenu |
| |
| source "net/Kconfig" |
| |
| source "drivers/Kconfig" |
| |
| source "fs/Kconfig" |
| |
| source "arch/mips/Kconfig.debug" |
| |
| source "security/Kconfig" |
| |
| source "crypto/Kconfig" |
| |
| source "lib/Kconfig" |
| |
| # |
| # Use the generic interrupt handling code in kernel/irq/: |
| # |
| config GENERIC_HARDIRQS |
| bool |
| default y |
| |
| config GENERIC_IRQ_PROBE |
| bool |
| default y |
| |
| config ISA_DMA_API |
| bool |
| default y |