| /* |
| * Samsung S5P/EXYNOS SoC series MIPI CSIS/DSIM DPHY driver |
| * |
| * Copyright (C) 2013 Samsung Electronics Co., Ltd. |
| * Author: Sylwester Nawrocki <s.nawrocki@samsung.com> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| */ |
| |
| #include <linux/err.h> |
| #include <linux/io.h> |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/of.h> |
| #include <linux/of_address.h> |
| #include <linux/phy/phy.h> |
| #include <linux/platform_device.h> |
| #include <linux/spinlock.h> |
| |
| /* MIPI_PHYn_CONTROL register offset: n = 0..1 */ |
| #define EXYNOS_MIPI_PHY_CONTROL(n) ((n) * 4) |
| #define EXYNOS_MIPI_PHY_ENABLE (1 << 0) |
| #define EXYNOS_MIPI_PHY_SRESETN (1 << 1) |
| #define EXYNOS_MIPI_PHY_MRESETN (1 << 2) |
| #define EXYNOS_MIPI_PHY_RESET_MASK (3 << 1) |
| |
| enum exynos_mipi_phy_id { |
| EXYNOS_MIPI_PHY_ID_CSIS0, |
| EXYNOS_MIPI_PHY_ID_DSIM0, |
| EXYNOS_MIPI_PHY_ID_CSIS1, |
| EXYNOS_MIPI_PHY_ID_DSIM1, |
| EXYNOS_MIPI_PHYS_NUM |
| }; |
| |
| #define is_mipi_dsim_phy_id(id) \ |
| ((id) == EXYNOS_MIPI_PHY_ID_DSIM0 || (id) == EXYNOS_MIPI_PHY_ID_DSIM1) |
| |
| struct exynos_mipi_video_phy { |
| spinlock_t slock; |
| struct video_phy_desc { |
| struct phy *phy; |
| unsigned int index; |
| } phys[EXYNOS_MIPI_PHYS_NUM]; |
| void __iomem *regs; |
| }; |
| |
| static int __set_phy_state(struct exynos_mipi_video_phy *state, |
| enum exynos_mipi_phy_id id, unsigned int on) |
| { |
| void __iomem *addr; |
| u32 reg, reset; |
| |
| addr = state->regs + EXYNOS_MIPI_PHY_CONTROL(id / 2); |
| |
| if (is_mipi_dsim_phy_id(id)) |
| reset = EXYNOS_MIPI_PHY_MRESETN; |
| else |
| reset = EXYNOS_MIPI_PHY_SRESETN; |
| |
| spin_lock(&state->slock); |
| reg = readl(addr); |
| if (on) |
| reg |= reset; |
| else |
| reg &= ~reset; |
| writel(reg, addr); |
| |
| /* Clear ENABLE bit only if MRESETN, SRESETN bits are not set. */ |
| if (on) |
| reg |= EXYNOS_MIPI_PHY_ENABLE; |
| else if (!(reg & EXYNOS_MIPI_PHY_RESET_MASK)) |
| reg &= ~EXYNOS_MIPI_PHY_ENABLE; |
| |
| writel(reg, addr); |
| spin_unlock(&state->slock); |
| return 0; |
| } |
| |
| #define to_mipi_video_phy(desc) \ |
| container_of((desc), struct exynos_mipi_video_phy, phys[(desc)->index]); |
| |
| static int exynos_mipi_video_phy_power_on(struct phy *phy) |
| { |
| struct video_phy_desc *phy_desc = phy_get_drvdata(phy); |
| struct exynos_mipi_video_phy *state = to_mipi_video_phy(phy_desc); |
| |
| return __set_phy_state(state, phy_desc->index, 1); |
| } |
| |
| static int exynos_mipi_video_phy_power_off(struct phy *phy) |
| { |
| struct video_phy_desc *phy_desc = phy_get_drvdata(phy); |
| struct exynos_mipi_video_phy *state = to_mipi_video_phy(phy_desc); |
| |
| return __set_phy_state(state, phy_desc->index, 0); |
| } |
| |
| static struct phy *exynos_mipi_video_phy_xlate(struct device *dev, |
| struct of_phandle_args *args) |
| { |
| struct exynos_mipi_video_phy *state = dev_get_drvdata(dev); |
| |
| if (WARN_ON(args->args[0] >= EXYNOS_MIPI_PHYS_NUM)) |
| return ERR_PTR(-ENODEV); |
| |
| return state->phys[args->args[0]].phy; |
| } |
| |
| static struct phy_ops exynos_mipi_video_phy_ops = { |
| .power_on = exynos_mipi_video_phy_power_on, |
| .power_off = exynos_mipi_video_phy_power_off, |
| .owner = THIS_MODULE, |
| }; |
| |
| static int exynos_mipi_video_phy_probe(struct platform_device *pdev) |
| { |
| struct exynos_mipi_video_phy *state; |
| struct device *dev = &pdev->dev; |
| struct resource *res; |
| struct phy_provider *phy_provider; |
| unsigned int i; |
| |
| state = devm_kzalloc(dev, sizeof(*state), GFP_KERNEL); |
| if (!state) |
| return -ENOMEM; |
| |
| res = platform_get_resource(pdev, IORESOURCE_MEM, 0); |
| |
| state->regs = devm_ioremap_resource(dev, res); |
| if (IS_ERR(state->regs)) |
| return PTR_ERR(state->regs); |
| |
| dev_set_drvdata(dev, state); |
| spin_lock_init(&state->slock); |
| |
| for (i = 0; i < EXYNOS_MIPI_PHYS_NUM; i++) { |
| struct phy *phy = devm_phy_create(dev, NULL, |
| &exynos_mipi_video_phy_ops, NULL); |
| if (IS_ERR(phy)) { |
| dev_err(dev, "failed to create PHY %d\n", i); |
| return PTR_ERR(phy); |
| } |
| |
| state->phys[i].phy = phy; |
| state->phys[i].index = i; |
| phy_set_drvdata(phy, &state->phys[i]); |
| } |
| |
| phy_provider = devm_of_phy_provider_register(dev, |
| exynos_mipi_video_phy_xlate); |
| |
| return PTR_ERR_OR_ZERO(phy_provider); |
| } |
| |
| static const struct of_device_id exynos_mipi_video_phy_of_match[] = { |
| { .compatible = "samsung,s5pv210-mipi-video-phy" }, |
| { }, |
| }; |
| MODULE_DEVICE_TABLE(of, exynos_mipi_video_phy_of_match); |
| |
| static struct platform_driver exynos_mipi_video_phy_driver = { |
| .probe = exynos_mipi_video_phy_probe, |
| .driver = { |
| .of_match_table = exynos_mipi_video_phy_of_match, |
| .name = "exynos-mipi-video-phy", |
| } |
| }; |
| module_platform_driver(exynos_mipi_video_phy_driver); |
| |
| MODULE_DESCRIPTION("Samsung S5P/EXYNOS SoC MIPI CSI-2/DSI PHY driver"); |
| MODULE_AUTHOR("Sylwester Nawrocki <s.nawrocki@samsung.com>"); |
| MODULE_LICENSE("GPL v2"); |