irda: Convert IRDA_DEBUG to pr_debug
Use the normal kernel debugging mechanism which also
enables dynamic_debug at the same time.
Other miscellanea:
o Remove sysctl for irda_debug
o Remove function tracing like uses (use ftrace instead)
o Coalesce formats
o Realign arguments
o Remove unnecessary OOM messages
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
diff --git a/drivers/net/irda/act200l-sir.c b/drivers/net/irda/act200l-sir.c
index a911645..e891751 100644
--- a/drivers/net/irda/act200l-sir.c
+++ b/drivers/net/irda/act200l-sir.c
@@ -107,8 +107,6 @@
{
struct qos_info *qos = &dev->qos;
- IRDA_DEBUG(2, "%s()\n", __func__ );
-
/* Power on the dongle */
sirdev_set_dtr_rts(dev, TRUE, TRUE);
@@ -124,8 +122,6 @@
static int act200l_close(struct sir_dev *dev)
{
- IRDA_DEBUG(2, "%s()\n", __func__ );
-
/* Power off the dongle */
sirdev_set_dtr_rts(dev, FALSE, FALSE);
@@ -143,8 +139,6 @@
u8 control[3];
int ret = 0;
- IRDA_DEBUG(2, "%s()\n", __func__ );
-
/* Clear DTR and set RTS to enter command mode */
sirdev_set_dtr_rts(dev, FALSE, TRUE);
@@ -212,8 +206,6 @@
};
int ret = 0;
- IRDA_DEBUG(2, "%s()\n", __func__ );
-
switch (state) {
case SIRDEV_STATE_DONGLE_RESET:
/* Reset the dongle : set RTS low for 25 ms */
diff --git a/drivers/net/irda/actisys-sir.c b/drivers/net/irda/actisys-sir.c
index 50b2141..e224b8b 100644
--- a/drivers/net/irda/actisys-sir.c
+++ b/drivers/net/irda/actisys-sir.c
@@ -165,8 +165,7 @@
int ret = 0;
int i = 0;
- IRDA_DEBUG(4, "%s(), speed=%d (was %d)\n", __func__,
- speed, dev->speed);
+ pr_debug("%s(), speed=%d (was %d)\n", __func__, speed, dev->speed);
/* dongle was already resetted from irda_request state machine,
* we are in known state (dongle default)
diff --git a/drivers/net/irda/ali-ircc.c b/drivers/net/irda/ali-ircc.c
index 7f23e5f..588680a 100644
--- a/drivers/net/irda/ali-ircc.c
+++ b/drivers/net/irda/ali-ircc.c
@@ -154,8 +154,6 @@
int reg, revision;
int i = 0;
- IRDA_DEBUG(2, "%s(), ---------------- Start ----------------\n", __func__);
-
ret = platform_driver_register(&ali_ircc_driver);
if (ret) {
net_err_ratelimited("%s, Can't register driver!\n",
@@ -168,7 +166,7 @@
/* Probe for all the ALi chipsets we know about */
for (chip= chips; chip->name; chip++, i++)
{
- IRDA_DEBUG(2, "%s(), Probing for %s ...\n", __func__, chip->name);
+ pr_debug("%s(), Probing for %s ...\n", __func__, chip->name);
/* Try all config registers for this chip */
for (cfg=0; cfg<2; cfg++)
@@ -198,12 +196,13 @@
if (reg == chip->cid_value)
{
- IRDA_DEBUG(2, "%s(), Chip found at 0x%03x\n", __func__, cfg_base);
+ pr_debug("%s(), Chip found at 0x%03x\n",
+ __func__, cfg_base);
outb(0x1F, cfg_base);
revision = inb(cfg_base+1);
- IRDA_DEBUG(2, "%s(), Found %s chip, revision=%d\n", __func__,
- chip->name, revision);
+ pr_debug("%s(), Found %s chip, revision=%d\n",
+ __func__, chip->name, revision);
/*
* If the user supplies the base address, then
@@ -225,15 +224,14 @@
}
else
{
- IRDA_DEBUG(2, "%s(), No %s chip at 0x%03x\n", __func__, chip->name, cfg_base);
+ pr_debug("%s(), No %s chip at 0x%03x\n",
+ __func__, chip->name, cfg_base);
}
/* Exit configuration */
outb(0xbb, cfg_base);
}
}
- IRDA_DEBUG(2, "%s(), ----------------- End -----------------\n", __func__);
-
if (ret)
platform_driver_unregister(&ali_ircc_driver);
@@ -250,8 +248,6 @@
{
int i;
- IRDA_DEBUG(2, "%s(), ---------------- Start ----------------\n", __func__);
-
for (i=0; i < ARRAY_SIZE(dev_self); i++) {
if (dev_self[i])
ali_ircc_close(dev_self[i]);
@@ -259,7 +255,6 @@
platform_driver_unregister(&ali_ircc_driver);
- IRDA_DEBUG(2, "%s(), ----------------- End -----------------\n", __func__);
}
static const struct net_device_ops ali_ircc_sir_ops = {
@@ -289,8 +284,6 @@
int dongle_id;
int err;
- IRDA_DEBUG(2, "%s(), ---------------- Start ----------------\n", __func__);
-
if (i >= ARRAY_SIZE(dev_self)) {
net_err_ratelimited("%s(), maximum number of supported chips reached!\n",
__func__);
@@ -394,7 +387,6 @@
self->io.dongle_id = dongle_id;
- IRDA_DEBUG(2, "%s(), ----------------- End -----------------\n", __func__);
return 0;
@@ -423,8 +415,6 @@
{
int iobase;
- IRDA_DEBUG(4, "%s(), ---------------- Start ----------------\n", __func__);
-
IRDA_ASSERT(self != NULL, return -1;);
iobase = self->io.fir_base;
@@ -433,7 +423,7 @@
unregister_netdev(self->netdev);
/* Release the PORT that this driver is using */
- IRDA_DEBUG(4, "%s(), Releasing Region %03x\n", __func__, self->io.fir_base);
+ pr_debug("%s(), Releasing Region %03x\n", __func__, self->io.fir_base);
release_region(self->io.fir_base, self->io.fir_ext);
if (self->tx_buff.head)
@@ -447,7 +437,6 @@
dev_self[self->index] = NULL;
free_netdev(self->netdev);
- IRDA_DEBUG(2, "%s(), ----------------- End -----------------\n", __func__);
return 0;
}
@@ -490,7 +479,6 @@
int cfg_base = info->cfg_base;
int hi, low, reg;
- IRDA_DEBUG(2, "%s(), ---------------- Start ----------------\n", __func__);
/* Enter Configuration */
outb(chip->entr1, cfg_base);
@@ -509,13 +497,13 @@
info->sir_base = info->fir_base;
- IRDA_DEBUG(2, "%s(), probing fir_base=0x%03x\n", __func__, info->fir_base);
+ pr_debug("%s(), probing fir_base=0x%03x\n", __func__, info->fir_base);
/* Read IRQ control register */
outb(0x70, cfg_base);
reg = inb(cfg_base+1);
info->irq = reg & 0x0f;
- IRDA_DEBUG(2, "%s(), probing irq=%d\n", __func__, info->irq);
+ pr_debug("%s(), probing irq=%d\n", __func__, info->irq);
/* Read DMA channel */
outb(0x74, cfg_base);
@@ -526,24 +514,23 @@
net_warn_ratelimited("%s(), No DMA channel assigned !\n",
__func__);
else
- IRDA_DEBUG(2, "%s(), probing dma=%d\n", __func__, info->dma);
+ pr_debug("%s(), probing dma=%d\n", __func__, info->dma);
/* Read Enabled Status */
outb(0x30, cfg_base);
reg = inb(cfg_base+1);
info->enabled = (reg & 0x80) && (reg & 0x01);
- IRDA_DEBUG(2, "%s(), probing enabled=%d\n", __func__, info->enabled);
+ pr_debug("%s(), probing enabled=%d\n", __func__, info->enabled);
/* Read Power Status */
outb(0x22, cfg_base);
reg = inb(cfg_base+1);
info->suspended = (reg & 0x20);
- IRDA_DEBUG(2, "%s(), probing suspended=%d\n", __func__, info->suspended);
+ pr_debug("%s(), probing suspended=%d\n", __func__, info->suspended);
/* Exit configuration */
outb(0xbb, cfg_base);
- IRDA_DEBUG(2, "%s(), ----------------- End -----------------\n", __func__);
return 0;
}
@@ -561,7 +548,6 @@
int version;
int iobase = info->fir_base;
- IRDA_DEBUG(2, "%s(), ---------------- Start ----------------\n", __func__);
/* Locking comments :
* Most operations here need to be protected. We are called before
@@ -622,7 +608,6 @@
// outb(UART_IER_RDI, iobase+UART_IER); //benjamin 2000/11/23 01:25PM
// Turn on the interrupts in ali_ircc_net_open
- IRDA_DEBUG(2, "%s(), ----------------- End ------------------\n", __func__);
return 0;
}
@@ -639,7 +624,6 @@
int dongle_id, reg;
int cfg_base = info->cfg_base;
- IRDA_DEBUG(2, "%s(), ---------------- Start ----------------\n", __func__);
/* Enter Configuration */
outb(chips[i].entr1, cfg_base);
@@ -653,13 +637,12 @@
outb(0xf0, cfg_base);
reg = inb(cfg_base+1);
dongle_id = ((reg>>6)&0x02) | ((reg>>5)&0x01);
- IRDA_DEBUG(2, "%s(), probing dongle_id=%d, dongle_types=%s\n", __func__,
- dongle_id, dongle_types[dongle_id]);
+ pr_debug("%s(), probing dongle_id=%d, dongle_types=%s\n",
+ __func__, dongle_id, dongle_types[dongle_id]);
/* Exit configuration */
outb(0xbb, cfg_base);
- IRDA_DEBUG(2, "%s(), ----------------- End ------------------\n", __func__);
return dongle_id;
}
@@ -676,7 +659,6 @@
struct ali_ircc_cb *self;
int ret;
- IRDA_DEBUG(2, "%s(), ---------------- Start ----------------\n", __func__);
self = netdev_priv(dev);
@@ -690,7 +672,6 @@
spin_unlock(&self->lock);
- IRDA_DEBUG(2, "%s(), ----------------- End ------------------\n", __func__);
return ret;
}
/*
@@ -704,7 +685,6 @@
__u8 eir, OldMessageCount;
int iobase, tmp;
- IRDA_DEBUG(1, "%s(), ---------------- Start ----------------\n", __func__);
iobase = self->io.fir_base;
@@ -717,10 +697,10 @@
//self->ier = inb(iobase+FIR_IER); 2000/12/1 04:32PM
eir = self->InterruptID & self->ier; /* Mask out the interesting ones */
- IRDA_DEBUG(1, "%s(), self->InterruptID = %x\n", __func__,self->InterruptID);
- IRDA_DEBUG(1, "%s(), self->LineStatus = %x\n", __func__,self->LineStatus);
- IRDA_DEBUG(1, "%s(), self->ier = %x\n", __func__,self->ier);
- IRDA_DEBUG(1, "%s(), eir = %x\n", __func__,eir);
+ pr_debug("%s(), self->InterruptID = %x\n", __func__, self->InterruptID);
+ pr_debug("%s(), self->LineStatus = %x\n", __func__, self->LineStatus);
+ pr_debug("%s(), self->ier = %x\n", __func__, self->ier);
+ pr_debug("%s(), eir = %x\n", __func__, eir);
/* Disable interrupts */
SetCOMInterrupts(self, FALSE);
@@ -731,7 +711,8 @@
{
if (self->io.direction == IO_XMIT) /* TX */
{
- IRDA_DEBUG(1, "%s(), ******* IIR_EOM (Tx) *******\n", __func__);
+ pr_debug("%s(), ******* IIR_EOM (Tx) *******\n",
+ __func__);
if(ali_ircc_dma_xmit_complete(self))
{
@@ -750,23 +731,27 @@
}
else /* RX */
{
- IRDA_DEBUG(1, "%s(), ******* IIR_EOM (Rx) *******\n", __func__);
+ pr_debug("%s(), ******* IIR_EOM (Rx) *******\n",
+ __func__);
if(OldMessageCount > ((self->LineStatus+1) & 0x07))
{
self->rcvFramesOverflow = TRUE;
- IRDA_DEBUG(1, "%s(), ******* self->rcvFramesOverflow = TRUE ********\n", __func__);
+ pr_debug("%s(), ******* self->rcvFramesOverflow = TRUE ********\n",
+ __func__);
}
if (ali_ircc_dma_receive_complete(self))
{
- IRDA_DEBUG(1, "%s(), ******* receive complete ********\n", __func__);
+ pr_debug("%s(), ******* receive complete ********\n",
+ __func__);
self->ier = IER_EOM;
}
else
{
- IRDA_DEBUG(1, "%s(), ******* Not receive complete ********\n", __func__);
+ pr_debug("%s(), ******* Not receive complete ********\n",
+ __func__);
self->ier = IER_EOM | IER_TIMER;
}
@@ -779,7 +764,8 @@
if(OldMessageCount > ((self->LineStatus+1) & 0x07))
{
self->rcvFramesOverflow = TRUE;
- IRDA_DEBUG(1, "%s(), ******* self->rcvFramesOverflow = TRUE *******\n", __func__);
+ pr_debug("%s(), ******* self->rcvFramesOverflow = TRUE *******\n",
+ __func__);
}
/* Disable Timer */
switch_bank(iobase, BANK1);
@@ -811,7 +797,6 @@
/* Restore Interrupt */
SetCOMInterrupts(self, TRUE);
- IRDA_DEBUG(1, "%s(), ----------------- End ---------------\n", __func__);
return IRQ_RETVAL(eir);
}
@@ -826,7 +811,6 @@
int iobase;
int iir, lsr;
- IRDA_DEBUG(2, "%s(), ---------------- Start ----------------\n", __func__);
iobase = self->io.sir_base;
@@ -835,13 +819,13 @@
/* Clear interrupt */
lsr = inb(iobase+UART_LSR);
- IRDA_DEBUG(4, "%s(), iir=%02x, lsr=%02x, iobase=%#x\n", __func__,
- iir, lsr, iobase);
+ pr_debug("%s(), iir=%02x, lsr=%02x, iobase=%#x\n",
+ __func__, iir, lsr, iobase);
switch (iir)
{
case UART_IIR_RLSI:
- IRDA_DEBUG(2, "%s(), RLSI\n", __func__);
+ pr_debug("%s(), RLSI\n", __func__);
break;
case UART_IIR_RDI:
/* Receive interrupt */
@@ -855,15 +839,14 @@
}
break;
default:
- IRDA_DEBUG(0, "%s(), unhandled IIR=%#x\n", __func__, iir);
+ pr_debug("%s(), unhandled IIR=%#x\n",
+ __func__, iir);
break;
}
}
- IRDA_DEBUG(2, "%s(), ----------------- End ------------------\n", __func__);
-
return IRQ_RETVAL(iir);
}
@@ -879,7 +862,6 @@
int boguscount = 0;
int iobase;
- IRDA_DEBUG(2, "%s(), ---------------- Start ----------------\n", __func__);
IRDA_ASSERT(self != NULL, return;);
iobase = self->io.sir_base;
@@ -894,12 +876,11 @@
/* Make sure we don't stay here too long */
if (boguscount++ > 32) {
- IRDA_DEBUG(2,"%s(), breaking!\n", __func__);
+ pr_debug("%s(), breaking!\n", __func__);
break;
}
} while (inb(iobase+UART_LSR) & UART_LSR_DR);
- IRDA_DEBUG(2, "%s(), ----------------- End ------------------\n", __func__ );
}
/*
@@ -916,7 +897,6 @@
IRDA_ASSERT(self != NULL, return;);
- IRDA_DEBUG(2, "%s(), ---------------- Start ----------------\n", __func__ );
iobase = self->io.sir_base;
@@ -935,16 +915,18 @@
{
/* We must wait until all data are gone */
while(!(inb(iobase+UART_LSR) & UART_LSR_TEMT))
- IRDA_DEBUG(1, "%s(), UART_LSR_THRE\n", __func__ );
+ pr_debug("%s(), UART_LSR_THRE\n", __func__);
- IRDA_DEBUG(1, "%s(), Changing speed! self->new_speed = %d\n", __func__ , self->new_speed);
+ pr_debug("%s(), Changing speed! self->new_speed = %d\n",
+ __func__, self->new_speed);
ali_ircc_change_speed(self, self->new_speed);
self->new_speed = 0;
// benjamin 2000/11/10 06:32PM
if (self->io.speed > 115200)
{
- IRDA_DEBUG(2, "%s(), ali_ircc_change_speed from UART_LSR_TEMT\n", __func__ );
+ pr_debug("%s(), ali_ircc_change_speed from UART_LSR_TEMT\n",
+ __func__);
self->ier = IER_EOM;
// SetCOMInterrupts(self, TRUE);
@@ -962,7 +944,6 @@
outb(UART_IER_RDI, iobase+UART_IER);
}
- IRDA_DEBUG(2, "%s(), ----------------- End ------------------\n", __func__ );
}
static void ali_ircc_change_speed(struct ali_ircc_cb *self, __u32 baud)
@@ -970,9 +951,8 @@
struct net_device *dev = self->netdev;
int iobase;
- IRDA_DEBUG(1, "%s(), ---------------- Start ----------------\n", __func__ );
- IRDA_DEBUG(2, "%s(), setting speed = %d\n", __func__ , baud);
+ pr_debug("%s(), setting speed = %d\n", __func__, baud);
/* This function *must* be called with irq off and spin-lock.
* - Jean II */
@@ -1011,7 +991,6 @@
netif_wake_queue(self->netdev);
- IRDA_DEBUG(2, "%s(), ----------------- End ------------------\n", __func__ );
}
static void ali_ircc_fir_change_speed(struct ali_ircc_cb *priv, __u32 baud)
@@ -1021,14 +1000,14 @@
struct ali_ircc_cb *self = priv;
struct net_device *dev;
- IRDA_DEBUG(1, "%s(), ---------------- Start ----------------\n", __func__ );
IRDA_ASSERT(self != NULL, return;);
dev = self->netdev;
iobase = self->io.fir_base;
- IRDA_DEBUG(1, "%s(), self->io.speed = %d, change to speed = %d\n", __func__ ,self->io.speed,baud);
+ pr_debug("%s(), self->io.speed = %d, change to speed = %d\n",
+ __func__, self->io.speed, baud);
/* Come from SIR speed */
if(self->io.speed <=115200)
@@ -1042,7 +1021,6 @@
// Set Dongle Speed mode
ali_ircc_change_dongle_speed(self, baud);
- IRDA_DEBUG(1, "%s(), ----------------- End ------------------\n", __func__ );
}
/*
@@ -1060,9 +1038,8 @@
int lcr; /* Line control reg */
int divisor;
- IRDA_DEBUG(1, "%s(), ---------------- Start ----------------\n", __func__ );
- IRDA_DEBUG(1, "%s(), Setting speed to: %d\n", __func__ , speed);
+ pr_debug("%s(), Setting speed to: %d\n", __func__, speed);
IRDA_ASSERT(self != NULL, return;);
@@ -1116,7 +1093,6 @@
spin_unlock_irqrestore(&self->lock, flags);
- IRDA_DEBUG(1, "%s(), ----------------- End ------------------\n", __func__ );
}
static void ali_ircc_change_dongle_speed(struct ali_ircc_cb *priv, int speed)
@@ -1126,14 +1102,14 @@
int iobase,dongle_id;
int tmp = 0;
- IRDA_DEBUG(1, "%s(), ---------------- Start ----------------\n", __func__ );
iobase = self->io.fir_base; /* or iobase = self->io.sir_base; */
dongle_id = self->io.dongle_id;
/* We are already locked, no need to do it again */
- IRDA_DEBUG(1, "%s(), Set Speed for %s , Speed = %d\n", __func__ , dongle_types[dongle_id], speed);
+ pr_debug("%s(), Set Speed for %s , Speed = %d\n",
+ __func__, dongle_types[dongle_id], speed);
switch_bank(iobase, BANK2);
tmp = inb(iobase+FIR_IRDA_CR);
@@ -1297,7 +1273,6 @@
switch_bank(iobase, BANK0);
- IRDA_DEBUG(1, "%s(), ----------------- End ------------------\n", __func__ );
}
/*
@@ -1310,11 +1285,10 @@
{
int actual = 0;
- IRDA_DEBUG(2, "%s(), ---------------- Start ----------------\n", __func__ );
/* Tx FIFO should be empty! */
if (!(inb(iobase+UART_LSR) & UART_LSR_THRE)) {
- IRDA_DEBUG(0, "%s(), failed, fifo not empty!\n", __func__ );
+ pr_debug("%s(), failed, fifo not empty!\n", __func__);
return 0;
}
@@ -1326,7 +1300,6 @@
actual++;
}
- IRDA_DEBUG(2, "%s(), ----------------- End ------------------\n", __func__ );
return actual;
}
@@ -1342,7 +1315,6 @@
int iobase;
char hwname[32];
- IRDA_DEBUG(2, "%s(), ---------------- Start ----------------\n", __func__ );
IRDA_ASSERT(dev != NULL, return -1;);
@@ -1386,7 +1358,6 @@
*/
self->irlap = irlap_open(dev, &self->qos, hwname);
- IRDA_DEBUG(2, "%s(), ----------------- End ------------------\n", __func__ );
return 0;
}
@@ -1403,7 +1374,6 @@
struct ali_ircc_cb *self;
//int iobase;
- IRDA_DEBUG(4, "%s(), ---------------- Start ----------------\n", __func__ );
IRDA_ASSERT(dev != NULL, return -1;);
@@ -1426,7 +1396,6 @@
free_irq(self->io.irq, dev);
free_dma(self->io.dma);
- IRDA_DEBUG(2, "%s(), ----------------- End ------------------\n", __func__ );
return 0;
}
@@ -1446,7 +1415,6 @@
__u32 speed;
int mtt, diff;
- IRDA_DEBUG(1, "%s(), ---------------- Start -----------------\n", __func__ );
self = netdev_priv(dev);
iobase = self->io.fir_base;
@@ -1500,7 +1468,8 @@
diff = self->now.tv_usec - self->stamp.tv_usec;
/* self->stamp is set from ali_ircc_dma_receive_complete() */
- IRDA_DEBUG(1, "%s(), ******* diff = %d *******\n", __func__ , diff);
+ pr_debug("%s(), ******* diff = %d *******\n",
+ __func__, diff);
if (diff < 0)
diff += 1000000;
@@ -1522,7 +1491,8 @@
/* Adjust for timer resolution */
mtt = (mtt+250) / 500; /* 4 discard, 5 get advanced, Let's round off */
- IRDA_DEBUG(1, "%s(), ************** mtt = %d ***********\n", __func__ , mtt);
+ pr_debug("%s(), ************** mtt = %d ***********\n",
+ __func__, mtt);
/* Setup timer */
if (mtt == 1) /* 500 us */
@@ -1579,7 +1549,6 @@
spin_unlock_irqrestore(&self->lock, flags);
dev_kfree_skb(skb);
- IRDA_DEBUG(1, "%s(), ----------------- End ------------------\n", __func__ );
return NETDEV_TX_OK;
}
@@ -1590,7 +1559,6 @@
unsigned char FIFO_OPTI, Hi, Lo;
- IRDA_DEBUG(1, "%s(), ---------------- Start -----------------\n", __func__ );
iobase = self->io.fir_base;
@@ -1641,7 +1609,8 @@
tmp = inb(iobase+FIR_LCR_B);
tmp &= ~0x20; // Disable SIP
outb(((unsigned char)(tmp & 0x3f) | LCR_B_TX_MODE) & ~LCR_B_BW, iobase+FIR_LCR_B);
- IRDA_DEBUG(1, "%s(), *** Change to TX mode: FIR_LCR_B = 0x%x ***\n", __func__ , inb(iobase+FIR_LCR_B));
+ pr_debug("%s(), *** Change to TX mode: FIR_LCR_B = 0x%x ***\n",
+ __func__, inb(iobase + FIR_LCR_B));
outb(0, iobase+FIR_LSR);
@@ -1651,7 +1620,6 @@
switch_bank(iobase, BANK0);
- IRDA_DEBUG(1, "%s(), ----------------- End ------------------\n", __func__ );
}
static int ali_ircc_dma_xmit_complete(struct ali_ircc_cb *self)
@@ -1659,7 +1627,6 @@
int iobase;
int ret = TRUE;
- IRDA_DEBUG(1, "%s(), ---------------- Start -----------------\n", __func__ );
iobase = self->io.fir_base;
@@ -1716,7 +1683,6 @@
switch_bank(iobase, BANK0);
- IRDA_DEBUG(1, "%s(), ----------------- End ------------------\n", __func__ );
return ret;
}
@@ -1731,7 +1697,6 @@
{
int iobase, tmp;
- IRDA_DEBUG(1, "%s(), ---------------- Start -----------------\n", __func__ );
iobase = self->io.fir_base;
@@ -1769,7 +1734,8 @@
//switch_bank(iobase, BANK0);
tmp = inb(iobase+FIR_LCR_B);
outb((unsigned char)(tmp &0x3f) | LCR_B_RX_MODE | LCR_B_BW , iobase + FIR_LCR_B); // 2000/12/1 05:16PM
- IRDA_DEBUG(1, "%s(), *** Change To RX mode: FIR_LCR_B = 0x%x ***\n", __func__ , inb(iobase+FIR_LCR_B));
+ pr_debug("%s(), *** Change To RX mode: FIR_LCR_B = 0x%x ***\n",
+ __func__, inb(iobase + FIR_LCR_B));
/* Set Rx Threshold */
switch_bank(iobase, BANK1);
@@ -1781,7 +1747,6 @@
outb(CR_DMA_EN | CR_DMA_BURST, iobase+FIR_CR);
switch_bank(iobase, BANK0);
- IRDA_DEBUG(1, "%s(), ----------------- End ------------------\n", __func__ );
return 0;
}
@@ -1792,8 +1757,6 @@
__u8 status, MessageCount;
int len, i, iobase, val;
- IRDA_DEBUG(1, "%s(), ---------------- Start -----------------\n", __func__ );
-
st_fifo = &self->st_fifo;
iobase = self->io.fir_base;
@@ -1801,7 +1764,7 @@
MessageCount = inb(iobase+ FIR_LSR)&0x07;
if (MessageCount > 0)
- IRDA_DEBUG(0, "%s(), Message count = %d,\n", __func__ , MessageCount);
+ pr_debug("%s(), Message count = %d\n", __func__, MessageCount);
for (i=0; i<=MessageCount; i++)
{
@@ -1814,11 +1777,11 @@
len = len << 8;
len |= inb(iobase+FIR_RX_DSR_LO);
- IRDA_DEBUG(1, "%s(), RX Length = 0x%.2x,\n", __func__ , len);
- IRDA_DEBUG(1, "%s(), RX Status = 0x%.2x,\n", __func__ , status);
+ pr_debug("%s(), RX Length = 0x%.2x,\n", __func__ , len);
+ pr_debug("%s(), RX Status = 0x%.2x,\n", __func__ , status);
if (st_fifo->tail >= MAX_RX_WINDOW) {
- IRDA_DEBUG(0, "%s(), window is full!\n", __func__ );
+ pr_debug("%s(), window is full!\n", __func__);
continue;
}
@@ -1841,7 +1804,8 @@
/* Check for errors */
if ((status & 0xd8) || self->rcvFramesOverflow || (len==0))
{
- IRDA_DEBUG(0,"%s(), ************* RX Errors ************\n", __func__ );
+ pr_debug("%s(), ************* RX Errors ************\n",
+ __func__);
/* Skip frame */
self->netdev->stats.rx_errors++;
@@ -1851,29 +1815,34 @@
if (status & LSR_FIFO_UR)
{
self->netdev->stats.rx_frame_errors++;
- IRDA_DEBUG(0,"%s(), ************* FIFO Errors ************\n", __func__ );
+ pr_debug("%s(), ************* FIFO Errors ************\n",
+ __func__);
}
if (status & LSR_FRAME_ERROR)
{
self->netdev->stats.rx_frame_errors++;
- IRDA_DEBUG(0,"%s(), ************* FRAME Errors ************\n", __func__ );
+ pr_debug("%s(), ************* FRAME Errors ************\n",
+ __func__);
}
if (status & LSR_CRC_ERROR)
{
self->netdev->stats.rx_crc_errors++;
- IRDA_DEBUG(0,"%s(), ************* CRC Errors ************\n", __func__ );
+ pr_debug("%s(), ************* CRC Errors ************\n",
+ __func__);
}
if(self->rcvFramesOverflow)
{
self->netdev->stats.rx_frame_errors++;
- IRDA_DEBUG(0,"%s(), ************* Overran DMA buffer ************\n", __func__ );
+ pr_debug("%s(), ************* Overran DMA buffer ************\n",
+ __func__);
}
if(len == 0)
{
self->netdev->stats.rx_frame_errors++;
- IRDA_DEBUG(0,"%s(), ********** Receive Frame Size = 0 *********\n", __func__ );
+ pr_debug("%s(), ********** Receive Frame Size = 0 *********\n",
+ __func__);
}
}
else
@@ -1885,7 +1854,8 @@
val = inb(iobase+FIR_BSR);
if ((val& BSR_FIFO_NOT_EMPTY)== 0x80)
{
- IRDA_DEBUG(0, "%s(), ************* BSR_FIFO_NOT_EMPTY ************\n", __func__ );
+ pr_debug("%s(), ************* BSR_FIFO_NOT_EMPTY ************\n",
+ __func__);
/* Put this entry back in fifo */
st_fifo->head--;
@@ -1946,7 +1916,6 @@
switch_bank(iobase, BANK0);
- IRDA_DEBUG(1, "%s(), ----------------- End ------------------\n", __func__ );
return TRUE;
}
@@ -1966,7 +1935,6 @@
int iobase;
__u32 speed;
- IRDA_DEBUG(2, "%s(), ---------------- Start ----------------\n", __func__ );
IRDA_ASSERT(dev != NULL, return NETDEV_TX_OK;);
@@ -2015,7 +1983,6 @@
dev_kfree_skb(skb);
- IRDA_DEBUG(2, "%s(), ----------------- End ------------------\n", __func__ );
return NETDEV_TX_OK;
}
@@ -2034,7 +2001,6 @@
unsigned long flags;
int ret = 0;
- IRDA_DEBUG(2, "%s(), ---------------- Start ----------------\n", __func__ );
IRDA_ASSERT(dev != NULL, return -1;);
@@ -2042,11 +2008,11 @@
IRDA_ASSERT(self != NULL, return -1;);
- IRDA_DEBUG(2, "%s(), %s, (cmd=0x%X)\n", __func__ , dev->name, cmd);
+ pr_debug("%s(), %s, (cmd=0x%X)\n", __func__ , dev->name, cmd);
switch (cmd) {
case SIOCSBANDWIDTH: /* Set bandwidth */
- IRDA_DEBUG(1, "%s(), SIOCSBANDWIDTH\n", __func__ );
+ pr_debug("%s(), SIOCSBANDWIDTH\n", __func__);
/*
* This function will also be used by IrLAP to change the
* speed, so we still must allow for speed change within
@@ -2060,13 +2026,13 @@
spin_unlock_irqrestore(&self->lock, flags);
break;
case SIOCSMEDIABUSY: /* Set media busy */
- IRDA_DEBUG(1, "%s(), SIOCSMEDIABUSY\n", __func__ );
+ pr_debug("%s(), SIOCSMEDIABUSY\n", __func__);
if (!capable(CAP_NET_ADMIN))
return -EPERM;
irda_device_set_media_busy(self->netdev, TRUE);
break;
case SIOCGRECEIVING: /* Check if we are receiving right now */
- IRDA_DEBUG(2, "%s(), SIOCGRECEIVING\n", __func__ );
+ pr_debug("%s(), SIOCGRECEIVING\n", __func__);
/* This is protected */
irq->ifr_receiving = ali_ircc_is_receiving(self);
break;
@@ -2074,7 +2040,6 @@
ret = -EOPNOTSUPP;
}
- IRDA_DEBUG(2, "%s(), ----------------- End ------------------\n", __func__ );
return ret;
}
@@ -2091,7 +2056,6 @@
int status = FALSE;
int iobase;
- IRDA_DEBUG(2, "%s(), ---------------- Start -----------------\n", __func__ );
IRDA_ASSERT(self != NULL, return FALSE;);
@@ -2105,7 +2069,8 @@
if((inb(iobase+FIR_FIFO_FR) & 0x3f) != 0)
{
/* We are receiving something */
- IRDA_DEBUG(1, "%s(), We are receiving something\n", __func__ );
+ pr_debug("%s(), We are receiving something\n",
+ __func__);
status = TRUE;
}
switch_bank(iobase, BANK0);
@@ -2117,7 +2082,6 @@
spin_unlock_irqrestore(&self->lock, flags);
- IRDA_DEBUG(2, "%s(), ----------------- End ------------------\n", __func__ );
return status;
}
@@ -2163,7 +2127,8 @@
int iobase = self->io.fir_base; /* or sir_base */
- IRDA_DEBUG(2, "%s(), -------- Start -------- ( Enable = %d )\n", __func__ , enable);
+ pr_debug("%s(), -------- Start -------- ( Enable = %d )\n",
+ __func__, enable);
/* Enable the interrupt which we wish to */
if (enable){
@@ -2204,14 +2169,12 @@
else
outb(newMask, iobase+UART_IER);
- IRDA_DEBUG(2, "%s(), ----------------- End ------------------\n", __func__ );
}
static void SIR2FIR(int iobase)
{
//unsigned char tmp;
- IRDA_DEBUG(1, "%s(), ---------------- Start ----------------\n", __func__ );
/* Already protected (change_speed() or setup()), no need to lock.
* Jean II */
@@ -2227,14 +2190,12 @@
//tmp |= 0x20;
//outb(tmp, iobase+FIR_LCR_B);
- IRDA_DEBUG(1, "%s(), ----------------- End ------------------\n", __func__ );
}
static void FIR2SIR(int iobase)
{
unsigned char val;
- IRDA_DEBUG(1, "%s(), ---------------- Start ----------------\n", __func__ );
/* Already protected (change_speed() or setup()), no need to lock.
* Jean II */
@@ -2250,7 +2211,6 @@
val = inb(iobase+UART_LSR);
val = inb(iobase+UART_MSR);
- IRDA_DEBUG(1, "%s(), ----------------- End ------------------\n", __func__ );
}
MODULE_AUTHOR("Benjamin Kong <benjamin_kong@ali.com.tw>");
diff --git a/drivers/net/irda/donauboe.c b/drivers/net/irda/donauboe.c
index a87a82c..b337e6d 100644
--- a/drivers/net/irda/donauboe.c
+++ b/drivers/net/irda/donauboe.c
@@ -232,7 +232,7 @@
for (i=0;i<len;i+=16) {
for (j=0;j<16 && i+j<len;j++) { sprintf(&dump[3*j],"%02x.",data[i+j]); }
dump [3*j]=0;
- IRDA_DEBUG (2, "%c%s\n",head , dump);
+ pr_debug("%c%s\n", head, dump);
head='+';
}
}
@@ -245,8 +245,6 @@
{
__u32 ringbase;
- IRDA_DEBUG (4, "%s()\n", __func__);
-
ringbase = INB (OBOE_RING_BASE0) << 10;
ringbase |= INB (OBOE_RING_BASE1) << 18;
ringbase |= INB (OBOE_RING_BASE2) << 26;
@@ -293,8 +291,6 @@
toshoboe_disablebm (struct toshoboe_cb *self)
{
__u8 command;
- IRDA_DEBUG (4, "%s()\n", __func__);
-
pci_read_config_byte (self->pdev, PCI_COMMAND, &command);
command &= ~PCI_COMMAND_MASTER;
pci_write_config_byte (self->pdev, PCI_COMMAND, command);
@@ -305,8 +301,6 @@
static void
toshoboe_stopchip (struct toshoboe_cb *self)
{
- IRDA_DEBUG (4, "%s()\n", __func__);
-
/*Disable interrupts */
OUTB (0x0, OBOE_IER);
/*Disable DMA, Disable Rx, Disable Tx */
@@ -350,7 +344,7 @@
__u16 pconfig = 0;
__u8 config0l = 0;
- IRDA_DEBUG (2, "%s(%d/%d)\n", __func__, self->speed, self->io.speed);
+ pr_debug("%s(%d/%d)\n", __func__, self->speed, self->io.speed);
switch (self->speed)
{
@@ -482,7 +476,6 @@
static void
toshoboe_enablebm (struct toshoboe_cb *self)
{
- IRDA_DEBUG (4, "%s()\n", __func__);
pci_set_master (self->pdev);
}
@@ -492,8 +485,6 @@
{
int i;
- IRDA_DEBUG (4, "%s()\n", __func__);
-
for (i = 0; i < TX_SLOTS; ++i)
{
self->ring->tx[i].len = 0;
@@ -550,8 +541,6 @@
{
__u32 physaddr;
- IRDA_DEBUG (4, "%s()\n", __func__);
-
toshoboe_initring (self);
toshoboe_enablebm (self);
OUTBP (OBOE_CONFIG1_RESET, OBOE_CONFIG1);
@@ -636,9 +625,8 @@
xbofs=xbofs/80000; /*Eight bits per byte, and mtt is in us*/
xbofs++;
- IRDA_DEBUG (2, DRIVER_NAME
- ": generated mtt of %d bytes for %d us at %d baud\n"
- , xbofs,mtt,self->speed);
+ pr_debug(DRIVER_NAME ": generated mtt of %d bytes for %d us at %d baud\n",
+ xbofs, mtt, self->speed);
if (xbofs > TX_LEN)
{
@@ -824,8 +812,6 @@
#endif
unsigned long flags;
- IRDA_DEBUG (4, "%s()\n", __func__);
-
if (request_irq (self->io.irq, toshoboe_probeinterrupt,
self->io.irqflags, "toshoboe", (void *) self))
{
@@ -983,10 +969,10 @@
IRDA_ASSERT (self != NULL, return NETDEV_TX_OK; );
- IRDA_DEBUG (1, "%s.tx:%x(%x)%x\n", __func__
- ,skb->len,self->txpending,INB (OBOE_ENABLEH));
+ pr_debug("%s.tx:%x(%x)%x\n",
+ __func__, skb->len, self->txpending, INB(OBOE_ENABLEH));
if (!cb->magic) {
- IRDA_DEBUG (2, "%s.Not IrLAP:%x\n", __func__, cb->magic);
+ pr_debug("%s.Not IrLAP:%x\n", __func__, cb->magic);
#ifdef DUMP_PACKETS
_dumpbufs(skb->data,skb->len,'>');
#endif
@@ -1012,8 +998,8 @@
if (self->txpending || skb->len)
{
self->new_speed = speed;
- IRDA_DEBUG (1, "%s: Queued TxDone scheduled speed change %d\n" ,
- __func__, speed);
+ pr_debug("%s: Queued TxDone scheduled speed change %d\n" ,
+ __func__, speed);
/* if no data, that's all! */
if (!skb->len)
{
@@ -1055,8 +1041,7 @@
/* which we will add a wrong checksum to */
mtt = toshoboe_makemttpacket (self, self->tx_bufs[self->txs], mtt);
- IRDA_DEBUG (1, "%s.mtt:%x(%x)%d\n", __func__
- ,skb->len,mtt,self->txpending);
+ pr_debug("%s.mtt:%x(%x)%d\n", __func__, skb->len, mtt, self->txpending);
if (mtt)
{
self->ring->tx[self->txs].len = mtt & 0xfff;
@@ -1099,8 +1084,9 @@
if (self->ring->tx[self->txs].control & OBOE_CTL_TX_HW_OWNS)
{
- IRDA_DEBUG (0, "%s.ful:%x(%x)%x\n", __func__
- ,skb->len, self->ring->tx[self->txs].control, self->txpending);
+ pr_debug("%s.ful:%x(%x)%x\n",
+ __func__, skb->len, self->ring->tx[self->txs].control,
+ self->txpending);
toshoboe_start_DMA(self, OBOE_CONFIG0H_ENTX);
spin_unlock_irqrestore(&self->spinlock, flags);
return NETDEV_TX_BUSY;
@@ -1177,8 +1163,7 @@
if (self->ring->tx[i].control & OBOE_CTL_TX_HW_OWNS)
self->txpending++;
}
- IRDA_DEBUG (1, "%s.txd(%x)%x/%x\n", __func__
- ,irqstat,txp,self->txpending);
+ pr_debug("%s.txd(%x)%x/%x\n", __func__, irqstat, txp, self->txpending);
txp = INB (OBOE_TXSLOT) & OBOE_SLOT_MASK;
@@ -1206,8 +1191,8 @@
if ((!self->txpending) && (self->new_speed))
{
self->speed = self->new_speed;
- IRDA_DEBUG (1, "%s: Executed TxDone scheduled speed change %d\n",
- __func__, self->speed);
+ pr_debug("%s: Executed TxDone scheduled speed change %d\n",
+ __func__, self->speed);
toshoboe_setbaud (self);
}
@@ -1222,8 +1207,8 @@
{
int len = self->ring->rx[self->rxs].len;
skb = NULL;
- IRDA_DEBUG (3, "%s.rcv:%x(%x)\n", __func__
- ,len,self->ring->rx[self->rxs].control);
+ pr_debug("%s.rcv:%x(%x)\n", __func__
+ , len, self->ring->rx[self->rxs].control);
#ifdef DUMP_PACKETS
dumpbufs(self->rx_bufs[self->rxs],len,'<');
@@ -1244,7 +1229,7 @@
len -= 2;
else
len = 0;
- IRDA_DEBUG (1, "%s.SIR:%x(%x)\n", __func__, len,enable);
+ pr_debug("%s.SIR:%x(%x)\n", __func__, len, enable);
}
#ifdef USE_MIR
@@ -1254,7 +1239,7 @@
len -= 2;
else
len = 0;
- IRDA_DEBUG (2, "%s.MIR:%x(%x)\n", __func__, len,enable);
+ pr_debug("%s.MIR:%x(%x)\n", __func__, len, enable);
}
#endif
else if (enable & OBOE_ENABLEH_FIRON)
@@ -1263,10 +1248,10 @@
len -= 4; /*FIXME: check this */
else
len = 0;
- IRDA_DEBUG (1, "%s.FIR:%x(%x)\n", __func__, len,enable);
+ pr_debug("%s.FIR:%x(%x)\n", __func__, len, enable);
}
else
- IRDA_DEBUG (0, "%s.?IR:%x(%x)\n", __func__, len,enable);
+ pr_debug("%s.?IR:%x(%x)\n", __func__, len, enable);
if (len)
{
@@ -1299,8 +1284,8 @@
/* (SIR) data is splitted in several slots. */
/* we have to join all the received buffers received */
/*in a large buffer before checking CRC. */
- IRDA_DEBUG (0, "%s.err:%x(%x)\n", __func__
- ,len,self->ring->rx[self->rxs].control);
+ pr_debug("%s.err:%x(%x)\n", __func__
+ , len, self->ring->rx[self->rxs].control);
}
self->ring->rx[self->rxs].len = 0x0;
@@ -1327,8 +1312,8 @@
if (irqstat & OBOE_INT_SIP)
{
self->int_sip++;
- IRDA_DEBUG (1, "%s.sip:%x(%x)%x\n", __func__
- ,self->int_sip,irqstat,self->txpending);
+ pr_debug("%s.sip:%x(%x)%x\n",
+ __func__, self->int_sip, irqstat, self->txpending);
}
return IRQ_HANDLED;
}
@@ -1341,8 +1326,6 @@
unsigned long flags;
int rc;
- IRDA_DEBUG (4, "%s()\n", __func__);
-
self = netdev_priv(dev);
if (self->async)
@@ -1379,8 +1362,6 @@
{
struct toshoboe_cb *self;
- IRDA_DEBUG (4, "%s()\n", __func__);
-
IRDA_ASSERT (dev != NULL, return -1; );
self = netdev_priv(dev);
@@ -1424,7 +1405,7 @@
IRDA_ASSERT (self != NULL, return -1; );
- IRDA_DEBUG (5, "%s(), %s, (cmd=0x%X)\n", __func__, dev->name, cmd);
+ pr_debug("%s(), %s, (cmd=0x%X)\n", __func__, dev->name, cmd);
/* Disable interrupts & save flags */
spin_lock_irqsave(&self->spinlock, flags);
@@ -1436,8 +1417,8 @@
* speed, so we still must allow for speed change within
* interrupt context.
*/
- IRDA_DEBUG (1, "%s(BANDWIDTH), %s, (%X/%ld\n", __func__
- ,dev->name, INB (OBOE_STATUS), irq->ifr_baudrate );
+ pr_debug("%s(BANDWIDTH), %s, (%X/%ld\n",
+ __func__, dev->name, INB(OBOE_STATUS), irq->ifr_baudrate);
if (!in_interrupt () && !capable (CAP_NET_ADMIN)) {
ret = -EPERM;
goto out;
@@ -1449,8 +1430,9 @@
self->new_speed = irq->ifr_baudrate;
break;
case SIOCSMEDIABUSY: /* Set media busy */
- IRDA_DEBUG (1, "%s(MEDIABUSY), %s, (%X/%x)\n", __func__
- ,dev->name, INB (OBOE_STATUS), capable (CAP_NET_ADMIN) );
+ pr_debug("%s(MEDIABUSY), %s, (%X/%x)\n",
+ __func__, dev->name,
+ INB(OBOE_STATUS), capable(CAP_NET_ADMIN));
if (!capable (CAP_NET_ADMIN)) {
ret = -EPERM;
goto out;
@@ -1459,11 +1441,11 @@
break;
case SIOCGRECEIVING: /* Check if we are receiving right now */
irq->ifr_receiving = (INB (OBOE_STATUS) & OBOE_STATUS_RXBUSY) ? 1 : 0;
- IRDA_DEBUG (3, "%s(RECEIVING), %s, (%X/%x)\n", __func__
- ,dev->name, INB (OBOE_STATUS), irq->ifr_receiving );
+ pr_debug("%s(RECEIVING), %s, (%X/%x)\n",
+ __func__, dev->name, INB(OBOE_STATUS), irq->ifr_receiving);
break;
default:
- IRDA_DEBUG (1, "%s(?), %s, (cmd=0x%X)\n", __func__, dev->name, cmd);
+ pr_debug("%s(?), %s, (cmd=0x%X)\n", __func__, dev->name, cmd);
ret = -EOPNOTSUPP;
}
out:
@@ -1490,8 +1472,6 @@
int i;
struct toshoboe_cb *self = pci_get_drvdata(pci_dev);
- IRDA_DEBUG (4, "%s()\n", __func__);
-
IRDA_ASSERT (self != NULL, return; );
if (!self->stopped)
@@ -1538,8 +1518,6 @@
int ok = 0;
int err;
- IRDA_DEBUG (4, "%s()\n", __func__);
-
if ((err=pci_enable_device(pci_dev)))
return err;
@@ -1700,8 +1678,6 @@
unsigned long flags;
int i = 10;
- IRDA_DEBUG (4, "%s()\n", __func__);
-
if (!self || self->stopped)
return 0;
@@ -1728,8 +1704,6 @@
struct toshoboe_cb *self = pci_get_drvdata(pci_dev);
unsigned long flags;
- IRDA_DEBUG (4, "%s()\n", __func__);
-
if (!self || !self->stopped)
return 0;
diff --git a/drivers/net/irda/girbil-sir.c b/drivers/net/irda/girbil-sir.c
index f0512ad..7e0a5b8 100644
--- a/drivers/net/irda/girbil-sir.c
+++ b/drivers/net/irda/girbil-sir.c
@@ -86,8 +86,6 @@
{
struct qos_info *qos = &dev->qos;
- IRDA_DEBUG(2, "%s()\n", __func__);
-
/* Power on dongle */
sirdev_set_dtr_rts(dev, TRUE, TRUE);
@@ -102,8 +100,6 @@
static int girbil_close(struct sir_dev *dev)
{
- IRDA_DEBUG(2, "%s()\n", __func__);
-
/* Power off dongle */
sirdev_set_dtr_rts(dev, FALSE, FALSE);
@@ -126,8 +122,6 @@
u8 control[2];
static int ret = 0;
- IRDA_DEBUG(2, "%s()\n", __func__);
-
/* dongle alread reset - port and dongle at default speed */
switch(state) {
@@ -210,8 +204,6 @@
u8 control = GIRBIL_TXEN | GIRBIL_RXEN;
int ret = 0;
- IRDA_DEBUG(2, "%s()\n", __func__);
-
switch (state) {
case SIRDEV_STATE_DONGLE_RESET:
/* Reset dongle */
diff --git a/drivers/net/irda/irda-usb.c b/drivers/net/irda/irda-usb.c
index e9aedbe..48b2f9a 100644
--- a/drivers/net/irda/irda-usb.c
+++ b/drivers/net/irda/irda-usb.c
@@ -176,12 +176,13 @@
(!force) && (self->speed != -1)) {
/* No speed and xbofs change here
* (we'll do it later in the write callback) */
- IRDA_DEBUG(2, "%s(), not changing speed yet\n", __func__);
+ pr_debug("%s(), not changing speed yet\n", __func__);
*header = 0;
return;
}
- IRDA_DEBUG(2, "%s(), changing speed to %d\n", __func__, self->new_speed);
+ pr_debug("%s(), changing speed to %d\n",
+ __func__, self->new_speed);
self->speed = self->new_speed;
/* We will do ` self->new_speed = -1; ' in the completion
* handler just in case the current URB fail - Jean II */
@@ -227,7 +228,8 @@
/* Set the negotiated additional XBOFS */
if (self->new_xbofs != -1) {
- IRDA_DEBUG(2, "%s(), changing xbofs to %d\n", __func__, self->new_xbofs);
+ pr_debug("%s(), changing xbofs to %d\n",
+ __func__, self->new_xbofs);
self->xbofs = self->new_xbofs;
/* We will do ` self->new_xbofs = -1; ' in the completion
* handler just in case the current URB fail - Jean II */
@@ -301,8 +303,8 @@
struct urb *urb;
int ret;
- IRDA_DEBUG(2, "%s(), speed=%d, xbofs=%d\n", __func__,
- self->new_speed, self->new_xbofs);
+ pr_debug("%s(), speed=%d, xbofs=%d\n", __func__,
+ self->new_speed, self->new_xbofs);
/* Grab the speed URB */
urb = self->speed_urb;
@@ -346,8 +348,6 @@
{
struct irda_usb_cb *self = urb->context;
- IRDA_DEBUG(2, "%s()\n", __func__);
-
/* We should always have a context */
IRDA_ASSERT(self != NULL, return;);
/* We should always be called for the speed URB */
@@ -356,7 +356,8 @@
/* Check for timeout and other USB nasties */
if (urb->status != 0) {
/* I get a lot of -ECONNABORTED = -103 here - Jean II */
- IRDA_DEBUG(0, "%s(), URB complete status %d, transfer_flags 0x%04X\n", __func__, urb->status, urb->transfer_flags);
+ pr_debug("%s(), URB complete status %d, transfer_flags 0x%04X\n",
+ __func__, urb->status, urb->transfer_flags);
/* Don't do anything here, that might confuse the USB layer.
* Instead, we will wait for irda_usb_net_timeout(), the
@@ -391,7 +392,7 @@
s16 xbofs;
int res, mtt;
- IRDA_DEBUG(4, "%s() on %s\n", __func__, netdev->name);
+ pr_debug("%s() on %s\n", __func__, netdev->name);
netif_stop_queue(netdev);
@@ -402,7 +403,7 @@
* We need to check self->present under the spinlock because
* of irda_usb_disconnect() is synchronous - Jean II */
if (!self->present) {
- IRDA_DEBUG(0, "%s(), Device is gone...\n", __func__);
+ pr_debug("%s(), Device is gone...\n", __func__);
goto drop;
}
@@ -554,8 +555,6 @@
struct sk_buff *skb = urb->context;
struct irda_usb_cb *self = ((struct irda_skb_cb *) skb->cb)->context;
- IRDA_DEBUG(2, "%s()\n", __func__);
-
/* We should always have a context */
IRDA_ASSERT(self != NULL, return;);
/* We should always be called for the speed URB */
@@ -568,7 +567,8 @@
/* Check for timeout and other USB nasties */
if (urb->status != 0) {
/* I get a lot of -ECONNABORTED = -103 here - Jean II */
- IRDA_DEBUG(0, "%s(), URB complete status %d, transfer_flags 0x%04X\n", __func__, urb->status, urb->transfer_flags);
+ pr_debug("%s(), URB complete status %d, transfer_flags 0x%04X\n",
+ __func__, urb->status, urb->transfer_flags);
/* Don't do anything here, that might confuse the USB layer,
* and we could go in recursion and blow the kernel stack...
@@ -587,7 +587,7 @@
/* If the network is closed, stop everything */
if ((!self->netopen) || (!self->present)) {
- IRDA_DEBUG(0, "%s(), Network is gone...\n", __func__);
+ pr_debug("%s(), Network is gone...\n", __func__);
spin_unlock_irqrestore(&self->lock, flags);
return;
}
@@ -598,7 +598,7 @@
(self->new_xbofs != self->xbofs)) {
/* We haven't changed speed yet (because of
* IUC_SPEED_BUG), so do it now - Jean II */
- IRDA_DEBUG(1, "%s(), Changing speed now...\n", __func__);
+ pr_debug("%s(), Changing speed now...\n", __func__);
irda_usb_change_speed_xbofs(self);
} else {
/* New speed and xbof is now committed in hardware */
@@ -630,7 +630,7 @@
struct urb *urb;
int done = 0; /* If we have made any progress */
- IRDA_DEBUG(0, "%s(), Network layer thinks we timed out!\n", __func__);
+ pr_debug("%s(), Network layer thinks we timed out!\n", __func__);
IRDA_ASSERT(self != NULL, return;);
/* Protect us from USB callbacks, net Tx and else. */
@@ -647,7 +647,8 @@
/* Check speed URB */
urb = self->speed_urb;
if (urb->status != 0) {
- IRDA_DEBUG(0, "%s: Speed change timed out, urb->status=%d, urb->transfer_flags=0x%04X\n", netdev->name, urb->status, urb->transfer_flags);
+ pr_debug("%s: Speed change timed out, urb->status=%d, urb->transfer_flags=0x%04X\n",
+ netdev->name, urb->status, urb->transfer_flags);
switch (urb->status) {
case -EINPROGRESS:
@@ -672,7 +673,8 @@
if (urb->status != 0) {
struct sk_buff *skb = urb->context;
- IRDA_DEBUG(0, "%s: Tx timed out, urb->status=%d, urb->transfer_flags=0x%04X\n", netdev->name, urb->status, urb->transfer_flags);
+ pr_debug("%s: Tx timed out, urb->status=%d, urb->transfer_flags=0x%04X\n",
+ netdev->name, urb->status, urb->transfer_flags);
/* Increase error count */
netdev->stats.tx_errors++;
@@ -761,8 +763,6 @@
struct irda_skb_cb *cb;
int ret;
- IRDA_DEBUG(2, "%s()\n", __func__);
-
/* This should never happen */
IRDA_ASSERT(skb != NULL, return;);
IRDA_ASSERT(urb != NULL, return;);
@@ -805,7 +805,7 @@
struct urb *next_urb;
unsigned int len, docopy;
- IRDA_DEBUG(2, "%s(), len=%d\n", __func__, urb->actual_length);
+ pr_debug("%s(), len=%d\n", __func__, urb->actual_length);
/* Find ourselves */
cb = (struct irda_skb_cb *) skb->cb;
@@ -815,7 +815,7 @@
/* If the network is closed or the device gone, stop everything */
if ((!self->netopen) || (!self->present)) {
- IRDA_DEBUG(0, "%s(), Network is gone!\n", __func__);
+ pr_debug("%s(), Network is gone!\n", __func__);
/* Don't re-submit the URB : will stall the Rx path */
return;
}
@@ -838,7 +838,8 @@
/* Usually precursor to a hot-unplug on OHCI. */
default:
self->netdev->stats.rx_errors++;
- IRDA_DEBUG(0, "%s(), RX status %d, transfer_flags 0x%04X\n", __func__, urb->status, urb->transfer_flags);
+ pr_debug("%s(), RX status %d, transfer_flags 0x%04X\n",
+ __func__, urb->status, urb->transfer_flags);
break;
}
/* If we received an error, we don't want to resubmit the
@@ -964,8 +965,6 @@
struct irda_skb_cb *cb;
struct urb *next_urb;
- IRDA_DEBUG(2, "%s()\n", __func__);
-
/* Find ourselves */
cb = (struct irda_skb_cb *) skb->cb;
IRDA_ASSERT(cb != NULL, return;);
@@ -1049,8 +1048,8 @@
self->bulk_out_ep),
patch_block, block_size,
&actual_len, msecs_to_jiffies(500));
- IRDA_DEBUG(3,"%s(): Bulk send %u bytes, ret=%d\n",
- __func__, actual_len, ret);
+ pr_debug("%s(): Bulk send %u bytes, ret=%d\n",
+ __func__, actual_len, ret);
if (ret < 0)
break;
@@ -1112,8 +1111,8 @@
+ ((build / 10) << 4)
+ (build % 10);
- IRDA_DEBUG(3, "%s(): Firmware Product version %ld\n",
- __func__, fw_version);
+ pr_debug("%s(): Firmware Product version %ld\n",
+ __func__, fw_version);
}
}
@@ -1169,8 +1168,6 @@
char hwname[16];
int i;
- IRDA_DEBUG(1, "%s()\n", __func__);
-
IRDA_ASSERT(netdev != NULL, return -1;);
self = netdev_priv(netdev);
IRDA_ASSERT(self != NULL, return -1;);
@@ -1249,8 +1246,6 @@
struct irda_usb_cb *self;
int i;
- IRDA_DEBUG(1, "%s()\n", __func__);
-
IRDA_ASSERT(netdev != NULL, return -1;);
self = netdev_priv(netdev);
IRDA_ASSERT(self != NULL, return -1;);
@@ -1304,7 +1299,7 @@
self = netdev_priv(dev);
IRDA_ASSERT(self != NULL, return -1;);
- IRDA_DEBUG(2, "%s(), %s, (cmd=0x%X)\n", __func__, dev->name, cmd);
+ pr_debug("%s(), %s, (cmd=0x%X)\n", __func__, dev->name, cmd);
switch (cmd) {
case SIOCSBANDWIDTH: /* Set bandwidth */
@@ -1354,7 +1349,6 @@
{
struct irda_class_desc *desc;
- IRDA_DEBUG(3, "%s()\n", __func__);
desc = self->irda_desc;
@@ -1370,8 +1364,10 @@
self->qos.window_size.bits = desc->bmWindowSize;
self->qos.data_size.bits = desc->bmDataSize;
- IRDA_DEBUG(0, "%s(), dongle says speed=0x%X, size=0x%X, window=0x%X, bofs=0x%X, turn=0x%X\n",
- __func__, self->qos.baud_rate.bits, self->qos.data_size.bits, self->qos.window_size.bits, self->qos.additional_bofs.bits, self->qos.min_turn_time.bits);
+ pr_debug("%s(), dongle says speed=0x%X, size=0x%X, window=0x%X, bofs=0x%X, turn=0x%X\n",
+ __func__, self->qos.baud_rate.bits, self->qos.data_size.bits,
+ self->qos.window_size.bits, self->qos.additional_bofs.bits,
+ self->qos.min_turn_time.bits);
/* Don't always trust what the dongle tell us */
if(self->capability & IUC_SIR_ONLY)
@@ -1414,8 +1410,6 @@
{
struct net_device *netdev = self->netdev;
- IRDA_DEBUG(1, "%s()\n", __func__);
-
netdev->netdev_ops = &irda_usb_netdev_ops;
irda_usb_init_qos(self);
@@ -1430,8 +1424,6 @@
*/
static inline void irda_usb_close(struct irda_usb_cb *self)
{
- IRDA_DEBUG(1, "%s()\n", __func__);
-
/* Remove netdevice */
unregister_netdev(self->netdev);
@@ -1509,8 +1501,9 @@
}
}
- IRDA_DEBUG(0, "%s(), And our endpoints are : in=%02X, out=%02X (%d), int=%02X\n",
- __func__, self->bulk_in_ep, self->bulk_out_ep, self->bulk_out_mtu, self->bulk_int_ep);
+ pr_debug("%s(), And our endpoints are : in=%02X, out=%02X (%d), int=%02X\n",
+ __func__, self->bulk_in_ep, self->bulk_out_ep,
+ self->bulk_out_mtu, self->bulk_int_ep);
return (self->bulk_in_ep != 0) && (self->bulk_out_ep != 0);
}
@@ -1572,7 +1565,7 @@
0, intf->altsetting->desc.bInterfaceNumber, desc,
sizeof(*desc), 500);
- IRDA_DEBUG(1, "%s(), ret=%d\n", __func__, ret);
+ pr_debug("%s(), ret=%d\n", __func__, ret);
if (ret < sizeof(*desc)) {
net_warn_ratelimited("usb-irda: class_descriptor read %s (%d)\n",
ret < 0 ? "failed" : "too short", ret);
@@ -1679,7 +1672,8 @@
* specify an alternate, but very few driver do like this.
* Jean II */
ret = usb_set_interface(dev, intf->altsetting->desc.bInterfaceNumber, 0);
- IRDA_DEBUG(1, "usb-irda: set interface %d result %d\n", intf->altsetting->desc.bInterfaceNumber, ret);
+ pr_debug("usb-irda: set interface %d result %d\n",
+ intf->altsetting->desc.bInterfaceNumber, ret);
switch (ret) {
case 0:
break;
@@ -1687,10 +1681,11 @@
/* Martin Diehl says if we get a -EPIPE we should
* be fine and we don't need to do a usb_clear_halt().
* - Jean II */
- IRDA_DEBUG(0, "%s(), Received -EPIPE, ignoring...\n", __func__);
+ pr_debug("%s(), Received -EPIPE, ignoring...\n",
+ __func__);
break;
default:
- IRDA_DEBUG(0, "%s(), Unknown error %d\n", __func__, ret);
+ pr_debug("%s(), Unknown error %d\n", __func__, ret);
ret = -EIO;
goto err_out_3;
}
@@ -1716,7 +1711,7 @@
ret = usb_control_msg (self->usbdev, usb_sndctrlpipe (self->usbdev, 0),
0x02, 0x40, 0, 0, NULL, 0, 500);
if (ret < 0) {
- IRDA_DEBUG (0, "usb_control_msg failed %d\n", ret);
+ pr_debug("usb_control_msg failed %d\n", ret);
goto err_out_3;
} else {
mdelay(10);
@@ -1808,8 +1803,6 @@
struct irda_usb_cb *self = usb_get_intfdata(intf);
int i;
- IRDA_DEBUG(1, "%s()\n", __func__);
-
usb_set_intfdata(intf, NULL);
if (!self)
return;
@@ -1858,7 +1851,7 @@
/* Free self and network device */
free_netdev(self->netdev);
- IRDA_DEBUG(0, "%s(), USB IrDA Disconnected\n", __func__);
+ pr_debug("%s(), USB IrDA Disconnected\n", __func__);
}
#ifdef CONFIG_PM
diff --git a/drivers/net/irda/irtty-sir.c b/drivers/net/irda/irtty-sir.c
index abbb654..696852e 100644
--- a/drivers/net/irda/irtty-sir.c
+++ b/drivers/net/irda/irtty-sir.c
@@ -240,7 +240,7 @@
* Characters received with a parity error, etc?
*/
if (fp && *fp++) {
- IRDA_DEBUG(0, "Framing or parity error!\n");
+ pr_debug("Framing or parity error!\n");
sirdev_receive(dev, NULL, 0); /* notify sir_dev (updating stats) */
return;
}
@@ -387,7 +387,7 @@
IRDA_ASSERT(priv != NULL, return -ENODEV;);
IRDA_ASSERT(priv->magic == IRTTY_MAGIC, return -EBADR;);
- IRDA_DEBUG(3, "%s(cmd=0x%X)\n", __func__, cmd);
+ pr_debug("%s(cmd=0x%X)\n", __func__, cmd);
dev = priv->dev;
IRDA_ASSERT(dev != NULL, return -1;);
@@ -477,7 +477,7 @@
mutex_unlock(&irtty_mutex);
- IRDA_DEBUG(0, "%s - %s: irda line discipline opened\n", __func__, tty->name);
+ pr_debug("%s - %s: irda line discipline opened\n", __func__, tty->name);
return 0;
@@ -528,7 +528,7 @@
kfree(priv);
- IRDA_DEBUG(0, "%s - %s: irda line discipline closed\n", __func__, tty->name);
+ pr_debug("%s - %s: irda line discipline closed\n", __func__, tty->name);
}
/* ------------------------------------------------------- */
diff --git a/drivers/net/irda/litelink-sir.c b/drivers/net/irda/litelink-sir.c
index 6827777..8eefcb4 100644
--- a/drivers/net/irda/litelink-sir.c
+++ b/drivers/net/irda/litelink-sir.c
@@ -76,8 +76,6 @@
{
struct qos_info *qos = &dev->qos;
- IRDA_DEBUG(2, "%s()\n", __func__);
-
/* Power up dongle */
sirdev_set_dtr_rts(dev, TRUE, TRUE);
@@ -93,8 +91,6 @@
static int litelink_close(struct sir_dev *dev)
{
- IRDA_DEBUG(2, "%s()\n", __func__);
-
/* Power off dongle */
sirdev_set_dtr_rts(dev, FALSE, FALSE);
@@ -111,8 +107,6 @@
{
int i;
- IRDA_DEBUG(2, "%s()\n", __func__);
-
/* dongle already reset by irda-thread - current speed (dongle and
* port) is the default speed (115200 for litelink!)
*/
@@ -154,8 +148,6 @@
*/
static int litelink_reset(struct sir_dev *dev)
{
- IRDA_DEBUG(2, "%s()\n", __func__);
-
/* probably the power-up can be dropped here, but with only
* 15 usec delay it's not worth the risk unless somebody with
* the hardware confirms it doesn't break anything...
diff --git a/drivers/net/irda/ma600-sir.c b/drivers/net/irda/ma600-sir.c
index 944d044..a764817 100644
--- a/drivers/net/irda/ma600-sir.c
+++ b/drivers/net/irda/ma600-sir.c
@@ -65,13 +65,11 @@
static int __init ma600_sir_init(void)
{
- IRDA_DEBUG(2, "%s()\n", __func__);
return irda_register_dongle(&ma600);
}
static void __exit ma600_sir_cleanup(void)
{
- IRDA_DEBUG(2, "%s()\n", __func__);
irda_unregister_dongle(&ma600);
}
@@ -86,8 +84,6 @@
{
struct qos_info *qos = &dev->qos;
- IRDA_DEBUG(2, "%s()\n", __func__);
-
sirdev_set_dtr_rts(dev, TRUE, TRUE);
/* Explicitly set the speeds we can accept */
@@ -104,8 +100,6 @@
static int ma600_close(struct sir_dev *dev)
{
- IRDA_DEBUG(2, "%s()\n", __func__);
-
/* Power off dongle */
sirdev_set_dtr_rts(dev, FALSE, FALSE);
@@ -174,8 +168,8 @@
{
u8 byte;
- IRDA_DEBUG(2, "%s(), speed=%d (was %d)\n", __func__,
- speed, dev->speed);
+ pr_debug("%s(), speed=%d (was %d)\n", __func__,
+ speed, dev->speed);
/* dongle already reset, dongle and port at default speed (9600) */
@@ -204,7 +198,7 @@
return -1;
}
else
- IRDA_DEBUG(2, "%s() control byte write read OK\n", __func__);
+ pr_debug("%s() control byte write read OK\n", __func__);
#endif
/* Set DTR, Set RTS */
@@ -236,8 +230,6 @@
static int ma600_reset(struct sir_dev *dev)
{
- IRDA_DEBUG(2, "%s()\n", __func__);
-
/* Reset the dongle : set DTR low for 10 ms */
sirdev_set_dtr_rts(dev, FALSE, TRUE);
msleep(10);
diff --git a/drivers/net/irda/mcp2120-sir.c b/drivers/net/irda/mcp2120-sir.c
index 9767469..2e33f91 100644
--- a/drivers/net/irda/mcp2120-sir.c
+++ b/drivers/net/irda/mcp2120-sir.c
@@ -63,8 +63,6 @@
{
struct qos_info *qos = &dev->qos;
- IRDA_DEBUG(2, "%s()\n", __func__);
-
/* seems no explicit power-on required here and reset switching it on anyway */
qos->baud_rate.bits &= IR_9600|IR_19200|IR_38400|IR_57600|IR_115200;
@@ -76,8 +74,6 @@
static int mcp2120_close(struct sir_dev *dev)
{
- IRDA_DEBUG(2, "%s()\n", __func__);
-
/* Power off dongle */
/* reset and inhibit mcp2120 */
sirdev_set_dtr_rts(dev, TRUE, TRUE);
@@ -102,8 +98,6 @@
u8 control[2];
static int ret = 0;
- IRDA_DEBUG(2, "%s()\n", __func__);
-
switch (state) {
case SIRDEV_STATE_DONGLE_SPEED:
/* Set DTR to enter command mode */
@@ -188,8 +182,6 @@
unsigned delay = 0;
int ret = 0;
- IRDA_DEBUG(2, "%s()\n", __func__);
-
switch (state) {
case SIRDEV_STATE_DONGLE_RESET:
//printk("mcp2120_reset: dongle_reset\n");
diff --git a/drivers/net/irda/mcs7780.c b/drivers/net/irda/mcs7780.c
index 6cbd29d..e4d678f 100644
--- a/drivers/net/irda/mcs7780.c
+++ b/drivers/net/irda/mcs7780.c
@@ -894,7 +894,7 @@
if (!ndev)
goto error1;
- IRDA_DEBUG(1, "MCS7780 USB-IrDA bridge found at %d.\n", udev->devnum);
+ pr_debug("MCS7780 USB-IrDA bridge found at %d.\n", udev->devnum);
SET_NETDEV_DEV(ndev, &intf->dev);
@@ -942,8 +942,8 @@
if (ret != 0)
goto error2;
- IRDA_DEBUG(1, "IrDA: Registered MosChip MCS7780 device as %s\n",
- ndev->name);
+ pr_debug("IrDA: Registered MosChip MCS7780 device as %s\n",
+ ndev->name);
mcs->transceiver_type = transceiver_type;
mcs->sir_tweak = sir_tweak;
@@ -973,7 +973,7 @@
free_netdev(mcs->netdev);
usb_set_intfdata(intf, NULL);
- IRDA_DEBUG(0, "MCS7780 now disconnected.\n");
+ pr_debug("MCS7780 now disconnected.\n");
}
module_usb_driver(mcs_driver);
diff --git a/drivers/net/irda/nsc-ircc.c b/drivers/net/irda/nsc-ircc.c
index c0a1790..e7317b1 100644
--- a/drivers/net/irda/nsc-ircc.c
+++ b/drivers/net/irda/nsc-ircc.c
@@ -226,8 +226,8 @@
/* Probe for all the NSC chipsets we know about */
for (chip = chips; chip->name ; chip++) {
- IRDA_DEBUG(2, "%s(), Probing for %s ...\n", __func__,
- chip->name);
+ pr_debug("%s(), Probing for %s ...\n", __func__,
+ chip->name);
/* Try all config registers for this chip */
for (cfg = 0; cfg < ARRAY_SIZE(chip->cfg); cfg++) {
@@ -238,7 +238,8 @@
/* Read index register */
reg = inb(cfg_base);
if (reg == 0xff) {
- IRDA_DEBUG(2, "%s() no chip at 0x%03x\n", __func__, cfg_base);
+ pr_debug("%s() no chip at 0x%03x\n",
+ __func__, cfg_base);
continue;
}
@@ -246,8 +247,9 @@
outb(chip->cid_index, cfg_base);
id = inb(cfg_base+1);
if ((id & chip->cid_mask) == chip->cid_value) {
- IRDA_DEBUG(2, "%s() Found %s chip, revision=%d\n",
- __func__, chip->name, id & ~chip->cid_mask);
+ pr_debug("%s() Found %s chip, revision=%d\n",
+ __func__, chip->name,
+ id & ~chip->cid_mask);
/*
* If we found a correct PnP setting,
@@ -277,7 +279,8 @@
* the chip.
*/
if (ret) {
- IRDA_DEBUG(2, "%s, PnP init failed\n", driver_name);
+ pr_debug("%s, PnP init failed\n",
+ driver_name);
memset(&info, 0, sizeof(chipio_t));
info.cfg_base = cfg_base;
info.fir_base = io[i];
@@ -299,7 +302,8 @@
}
i++;
} else {
- IRDA_DEBUG(2, "%s(), Wrong chip id=0x%02x\n", __func__, id);
+ pr_debug("%s(), Wrong chip id=0x%02x\n",
+ __func__, id);
}
}
}
@@ -363,9 +367,6 @@
void *ret;
int err, chip_index;
- IRDA_DEBUG(2, "%s()\n", __func__);
-
-
for (chip_index = 0; chip_index < ARRAY_SIZE(dev_self); chip_index++) {
if (!dev_self[chip_index])
break;
@@ -520,8 +521,6 @@
{
int iobase;
- IRDA_DEBUG(4, "%s()\n", __func__);
-
IRDA_ASSERT(self != NULL, return -1;);
iobase = self->io.fir_base;
@@ -532,8 +531,8 @@
unregister_netdev(self->netdev);
/* Release the PORT that this driver is using */
- IRDA_DEBUG(4, "%s(), Releasing Region %03x\n",
- __func__, self->io.fir_base);
+ pr_debug("%s(), Releasing Region %03x\n",
+ __func__, self->io.fir_base);
release_region(self->io.fir_base, self->io.fir_ext);
if (self->tx_buff.head)
@@ -630,8 +629,8 @@
break;
}
info->sir_base = info->fir_base;
- IRDA_DEBUG(2, "%s(), probing fir_base=0x%03x\n", __func__,
- info->fir_base);
+ pr_debug("%s(), probing fir_base=0x%03x\n", __func__,
+ info->fir_base);
/* Read control signals routing register (CSRT) */
outb(CFG_108_CSRT, cfg_base);
@@ -663,7 +662,7 @@
info->irq = 15;
break;
}
- IRDA_DEBUG(2, "%s(), probing irq=%d\n", __func__, info->irq);
+ pr_debug("%s(), probing irq=%d\n", __func__, info->irq);
/* Currently we only read Rx DMA but it will also be used for Tx */
switch ((reg >> 3) & 0x03) {
@@ -680,7 +679,7 @@
info->dma = 3;
break;
}
- IRDA_DEBUG(2, "%s(), probing dma=%d\n", __func__, info->dma);
+ pr_debug("%s(), probing dma=%d\n", __func__, info->dma);
/* Read mode control register (MCTL) */
outb(CFG_108_MCTL, cfg_base);
@@ -731,7 +730,7 @@
pnp = (reg >> 3) & 0x01;
if (pnp) {
- IRDA_DEBUG(2, "(), Chip is in PnP mode\n");
+ pr_debug("(), Chip is in PnP mode\n");
outb(0x46, cfg_base);
reg = (inb(cfg_base+1) & 0xfe) << 2;
@@ -835,9 +834,8 @@
int enabled;
/* User is sure about his config... accept it. */
- IRDA_DEBUG(2, "%s(): nsc_ircc_init_39x (user settings): "
- "io=0x%04x, irq=%d, dma=%d\n",
- __func__, info->fir_base, info->irq, info->dma);
+ pr_debug("%s(): nsc_ircc_init_39x (user settings): io=0x%04x, irq=%d, dma=%d\n",
+ __func__, info->fir_base, info->irq, info->dma);
/* Access bank for SP2 */
outb(CFG_39X_LDN, cfg_base);
@@ -877,8 +875,8 @@
int reg1, reg2, irq, irqt, dma1, dma2;
int enabled, susp;
- IRDA_DEBUG(2, "%s(), nsc_ircc_probe_39x, base=%d\n",
- __func__, cfg_base);
+ pr_debug("%s(), nsc_ircc_probe_39x, base=%d\n",
+ __func__, cfg_base);
/* This function should be executed with irq off to avoid
* another driver messing with the Super I/O bank - Jean II */
@@ -912,7 +910,8 @@
outb(CFG_39X_SPC, cfg_base);
susp = 1 - ((inb(cfg_base+1) & 0x02) >> 1);
- IRDA_DEBUG(2, "%s(): io=0x%02x%02x, irq=%d (type %d), rxdma=%d, txdma=%d, enabled=%d (suspended=%d)\n", __func__, reg1,reg2,irq,irqt,dma1,dma2,enabled,susp);
+ pr_debug("%s(): io=0x%02x%02x, irq=%d (type %d), rxdma=%d, txdma=%d, enabled=%d (suspended=%d)\n",
+ __func__, reg1, reg2, irq, irqt, dma1, dma2, enabled, susp);
/* Configure SP2 */
@@ -963,8 +962,8 @@
!(pnp_dma_flags(dev, 0) & IORESOURCE_DISABLED))
pnp_info.dma = pnp_dma(dev, 0);
- IRDA_DEBUG(0, "%s() : From PnP, found firbase 0x%03X ; irq %d ; dma %d.\n",
- __func__, pnp_info.fir_base, pnp_info.irq, pnp_info.dma);
+ pr_debug("%s() : From PnP, found firbase 0x%03X ; irq %d ; dma %d.\n",
+ __func__, pnp_info.fir_base, pnp_info.irq, pnp_info.dma);
if((pnp_info.fir_base == 0) ||
(pnp_info.irq == -1) || (pnp_info.dma == -1)) {
@@ -992,8 +991,8 @@
switch_bank(iobase, BANK3);
version = inb(iobase+MID);
- IRDA_DEBUG(2, "%s() Driver %s Found chip version %02x\n",
- __func__, driver_name, version);
+ pr_debug("%s() Driver %s Found chip version %02x\n",
+ __func__, driver_name, version);
/* Should be 0x2? */
if (0x20 != (version & 0xf0)) {
@@ -1096,39 +1095,39 @@
switch (dongle_id) {
case 0x00: /* same as */
case 0x01: /* Differential serial interface */
- IRDA_DEBUG(0, "%s(), %s not defined by irda yet\n",
- __func__, dongle_types[dongle_id]);
+ pr_debug("%s(), %s not defined by irda yet\n",
+ __func__, dongle_types[dongle_id]);
break;
case 0x02: /* same as */
case 0x03: /* Reserved */
- IRDA_DEBUG(0, "%s(), %s not defined by irda yet\n",
- __func__, dongle_types[dongle_id]);
+ pr_debug("%s(), %s not defined by irda yet\n",
+ __func__, dongle_types[dongle_id]);
break;
case 0x04: /* Sharp RY5HD01 */
break;
case 0x05: /* Reserved, but this is what the Thinkpad reports */
- IRDA_DEBUG(0, "%s(), %s not defined by irda yet\n",
- __func__, dongle_types[dongle_id]);
+ pr_debug("%s(), %s not defined by irda yet\n",
+ __func__, dongle_types[dongle_id]);
break;
case 0x06: /* Single-ended serial interface */
- IRDA_DEBUG(0, "%s(), %s not defined by irda yet\n",
- __func__, dongle_types[dongle_id]);
+ pr_debug("%s(), %s not defined by irda yet\n",
+ __func__, dongle_types[dongle_id]);
break;
case 0x07: /* Consumer-IR only */
- IRDA_DEBUG(0, "%s(), %s is not for IrDA mode\n",
- __func__, dongle_types[dongle_id]);
+ pr_debug("%s(), %s is not for IrDA mode\n",
+ __func__, dongle_types[dongle_id]);
break;
case 0x08: /* HP HSDL-2300, HP HSDL-3600/HSDL-3610 */
- IRDA_DEBUG(0, "%s(), %s\n",
- __func__, dongle_types[dongle_id]);
+ pr_debug("%s(), %s\n",
+ __func__, dongle_types[dongle_id]);
break;
case 0x09: /* IBM31T1100 or Temic TFDS6000/TFDS6500 */
outb(0x28, iobase+7); /* Set irsl[0-2] as output */
break;
case 0x0A: /* same as */
case 0x0B: /* Reserved */
- IRDA_DEBUG(0, "%s(), %s not defined by irda yet\n",
- __func__, dongle_types[dongle_id]);
+ pr_debug("%s(), %s not defined by irda yet\n",
+ __func__, dongle_types[dongle_id]);
break;
case 0x0C: /* same as */
case 0x0D: /* HP HSDL-1100/HSDL-2100 */
@@ -1142,15 +1141,15 @@
outb(0x28, iobase+7); /* Set irsl[0-2] as output */
break;
case 0x0F: /* No dongle connected */
- IRDA_DEBUG(0, "%s(), %s\n",
- __func__, dongle_types[dongle_id]);
+ pr_debug("%s(), %s\n",
+ __func__, dongle_types[dongle_id]);
switch_bank(iobase, BANK0);
outb(0x62, iobase+MCR);
break;
default:
- IRDA_DEBUG(0, "%s(), invalid dongle_id %#x",
- __func__, dongle_id);
+ pr_debug("%s(), invalid dongle_id %#x",
+ __func__, dongle_id);
}
/* IRCFG1: IRSL1 and 2 are set to IrDA mode */
@@ -1181,31 +1180,31 @@
switch (dongle_id) {
case 0x00: /* same as */
case 0x01: /* Differential serial interface */
- IRDA_DEBUG(0, "%s(), %s not defined by irda yet\n",
- __func__, dongle_types[dongle_id]);
+ pr_debug("%s(), %s not defined by irda yet\n",
+ __func__, dongle_types[dongle_id]);
break;
case 0x02: /* same as */
case 0x03: /* Reserved */
- IRDA_DEBUG(0, "%s(), %s not defined by irda yet\n",
- __func__, dongle_types[dongle_id]);
+ pr_debug("%s(), %s not defined by irda yet\n",
+ __func__, dongle_types[dongle_id]);
break;
case 0x04: /* Sharp RY5HD01 */
break;
case 0x05: /* Reserved */
- IRDA_DEBUG(0, "%s(), %s not defined by irda yet\n",
- __func__, dongle_types[dongle_id]);
+ pr_debug("%s(), %s not defined by irda yet\n",
+ __func__, dongle_types[dongle_id]);
break;
case 0x06: /* Single-ended serial interface */
- IRDA_DEBUG(0, "%s(), %s not defined by irda yet\n",
- __func__, dongle_types[dongle_id]);
+ pr_debug("%s(), %s not defined by irda yet\n",
+ __func__, dongle_types[dongle_id]);
break;
case 0x07: /* Consumer-IR only */
- IRDA_DEBUG(0, "%s(), %s is not for IrDA mode\n",
- __func__, dongle_types[dongle_id]);
+ pr_debug("%s(), %s is not for IrDA mode\n",
+ __func__, dongle_types[dongle_id]);
break;
case 0x08: /* HP HSDL-2300, HP HSDL-3600/HSDL-3610 */
- IRDA_DEBUG(0, "%s(), %s\n",
- __func__, dongle_types[dongle_id]);
+ pr_debug("%s(), %s\n",
+ __func__, dongle_types[dongle_id]);
outb(0x00, iobase+4);
if (speed > 115200)
outb(0x01, iobase+4);
@@ -1223,8 +1222,8 @@
break;
case 0x0A: /* same as */
case 0x0B: /* Reserved */
- IRDA_DEBUG(0, "%s(), %s not defined by irda yet\n",
- __func__, dongle_types[dongle_id]);
+ pr_debug("%s(), %s not defined by irda yet\n",
+ __func__, dongle_types[dongle_id]);
break;
case 0x0C: /* same as */
case 0x0D: /* HP HSDL-1100/HSDL-2100 */
@@ -1232,14 +1231,14 @@
case 0x0E: /* Supports SIR Mode only */
break;
case 0x0F: /* No dongle connected */
- IRDA_DEBUG(0, "%s(), %s is not for IrDA mode\n",
- __func__, dongle_types[dongle_id]);
+ pr_debug("%s(), %s is not for IrDA mode\n",
+ __func__, dongle_types[dongle_id]);
switch_bank(iobase, BANK0);
outb(0x62, iobase+MCR);
break;
default:
- IRDA_DEBUG(0, "%s(), invalid data_rate\n", __func__);
+ pr_debug("%s(), invalid data_rate\n", __func__);
}
/* Restore bank register */
outb(bank, iobase+BSR);
@@ -1260,7 +1259,7 @@
__u8 bank;
__u8 ier; /* Interrupt enable register */
- IRDA_DEBUG(2, "%s(), speed=%d\n", __func__, speed);
+ pr_debug("%s(), speed=%d\n", __func__, speed);
IRDA_ASSERT(self != NULL, return 0;);
@@ -1293,20 +1292,20 @@
outb(inb(iobase+4) | 0x04, iobase+4);
mcr = MCR_MIR;
- IRDA_DEBUG(0, "%s(), handling baud of 576000\n", __func__);
+ pr_debug("%s(), handling baud of 576000\n", __func__);
break;
case 1152000:
mcr = MCR_MIR;
- IRDA_DEBUG(0, "%s(), handling baud of 1152000\n", __func__);
+ pr_debug("%s(), handling baud of 1152000\n", __func__);
break;
case 4000000:
mcr = MCR_FIR;
- IRDA_DEBUG(0, "%s(), handling baud of 4000000\n", __func__);
+ pr_debug("%s(), handling baud of 4000000\n", __func__);
break;
default:
mcr = MCR_FIR;
- IRDA_DEBUG(0, "%s(), unknown baud rate of %d\n",
- __func__, speed);
+ pr_debug("%s(), unknown baud rate of %d\n",
+ __func__, speed);
break;
}
@@ -1613,15 +1612,13 @@
int actual = 0;
__u8 bank;
- IRDA_DEBUG(4, "%s()\n", __func__);
-
/* Save current bank */
bank = inb(iobase+BSR);
switch_bank(iobase, BANK0);
if (!(inb_p(iobase+LSR) & LSR_TXEMP)) {
- IRDA_DEBUG(4, "%s(), warning, FIFO not empty yet!\n",
- __func__);
+ pr_debug("%s(), warning, FIFO not empty yet!\n",
+ __func__);
/* FIFO may still be filled to the Tx interrupt threshold */
fifo_size -= 17;
@@ -1633,8 +1630,8 @@
outb(buf[actual++], iobase+TXD);
}
- IRDA_DEBUG(4, "%s(), fifo_size %d ; %d sent of %d\n",
- __func__, fifo_size, actual, len);
+ pr_debug("%s(), fifo_size %d ; %d sent of %d\n",
+ __func__, fifo_size, actual, len);
/* Restore bank */
outb(bank, iobase+BSR);
@@ -1655,8 +1652,6 @@
__u8 bank;
int ret = TRUE;
- IRDA_DEBUG(2, "%s()\n", __func__);
-
iobase = self->io.fir_base;
/* Save current bank */
@@ -1786,7 +1781,7 @@
len = inb(iobase+RFLFL) | ((inb(iobase+RFLFH) & 0x1f) << 8);
if (st_fifo->tail >= MAX_RX_WINDOW) {
- IRDA_DEBUG(0, "%s(), window is full!\n", __func__);
+ pr_debug("%s(), window is full!\n", __func__);
continue;
}
@@ -1980,7 +1975,7 @@
* Need to be after self->io.direction to avoid race with
* nsc_ircc_hard_xmit_sir() - Jean II */
if (self->new_speed) {
- IRDA_DEBUG(2, "%s(), Changing speed!\n", __func__);
+ pr_debug("%s(), Changing speed!\n", __func__);
self->ier = nsc_ircc_change_speed(self,
self->new_speed);
self->new_speed = 0;
@@ -2174,7 +2169,6 @@
char hwname[32];
__u8 bank;
- IRDA_DEBUG(4, "%s()\n", __func__);
IRDA_ASSERT(dev != NULL, return -1;);
self = netdev_priv(dev);
@@ -2236,7 +2230,6 @@
int iobase;
__u8 bank;
- IRDA_DEBUG(4, "%s()\n", __func__);
IRDA_ASSERT(dev != NULL, return -1;);
@@ -2290,7 +2283,7 @@
IRDA_ASSERT(self != NULL, return -1;);
- IRDA_DEBUG(2, "%s(), %s, (cmd=0x%X)\n", __func__, dev->name, cmd);
+ pr_debug("%s(), %s, (cmd=0x%X)\n", __func__, dev->name, cmd);
switch (cmd) {
case SIOCSBANDWIDTH: /* Set bandwidth */
@@ -2329,7 +2322,7 @@
if (self->io.suspended)
return 0;
- IRDA_DEBUG(1, "%s, Suspending\n", driver_name);
+ pr_debug("%s, Suspending\n", driver_name);
rtnl_lock();
if (netif_running(self->netdev)) {
@@ -2363,7 +2356,7 @@
if (!self->io.suspended)
return 0;
- IRDA_DEBUG(1, "%s, Waking up\n", driver_name);
+ pr_debug("%s, Waking up\n", driver_name);
rtnl_lock();
nsc_ircc_setup(&self->io);
diff --git a/drivers/net/irda/old_belkin-sir.c b/drivers/net/irda/old_belkin-sir.c
index f237136..a7c2e99 100644
--- a/drivers/net/irda/old_belkin-sir.c
+++ b/drivers/net/irda/old_belkin-sir.c
@@ -90,8 +90,6 @@
{
struct qos_info *qos = &dev->qos;
- IRDA_DEBUG(2, "%s()\n", __func__);
-
/* Power on dongle */
sirdev_set_dtr_rts(dev, TRUE, TRUE);
@@ -108,8 +106,6 @@
static int old_belkin_close(struct sir_dev *dev)
{
- IRDA_DEBUG(2, "%s()\n", __func__);
-
/* Power off dongle */
sirdev_set_dtr_rts(dev, FALSE, FALSE);
@@ -123,8 +119,6 @@
*/
static int old_belkin_change_speed(struct sir_dev *dev, unsigned speed)
{
- IRDA_DEBUG(2, "%s()\n", __func__);
-
dev->speed = 9600;
return (speed==dev->speed) ? 0 : -EINVAL;
}
@@ -137,8 +131,6 @@
*/
static int old_belkin_reset(struct sir_dev *dev)
{
- IRDA_DEBUG(2, "%s()\n", __func__);
-
/* This dongles speed "defaults" to 9600 bps ;-) */
dev->speed = 9600;
diff --git a/drivers/net/irda/sir_dev.c b/drivers/net/irda/sir_dev.c
index 5bfcd25..6af26a7 100644
--- a/drivers/net/irda/sir_dev.c
+++ b/drivers/net/irda/sir_dev.c
@@ -109,11 +109,11 @@
int ret = -1;
unsigned delay;
- IRDA_DEBUG(2, "%s(), <%ld>\n", __func__, jiffies);
+ pr_debug("%s(), <%ld>\n", __func__, jiffies);
do {
- IRDA_DEBUG(3, "%s - state=0x%04x / substate=0x%04x\n",
- __func__, fsm->state, fsm->substate);
+ pr_debug("%s - state=0x%04x / substate=0x%04x\n",
+ __func__, fsm->state, fsm->substate);
next_state = fsm->state;
delay = 0;
@@ -287,12 +287,12 @@
{
struct sir_fsm *fsm = &dev->fsm;
- IRDA_DEBUG(2, "%s - state=0x%04x / param=%u\n", __func__,
- initial_state, param);
+ pr_debug("%s - state=0x%04x / param=%u\n", __func__,
+ initial_state, param);
if (down_trylock(&fsm->sem)) {
if (in_interrupt() || in_atomic() || irqs_disabled()) {
- IRDA_DEBUG(1, "%s(), state machine busy!\n", __func__);
+ pr_debug("%s(), state machine busy!\n", __func__);
return -EWOULDBLOCK;
} else
down(&fsm->sem);
@@ -345,7 +345,7 @@
{
int err;
- IRDA_DEBUG(3, "%s : requesting dongle %d.\n", __func__, type);
+ pr_debug("%s : requesting dongle %d.\n", __func__, type);
err = sirdev_schedule_dongle_open(dev, type);
if (unlikely(err))
@@ -380,7 +380,7 @@
ret = dev->drv->do_write(dev, dev->tx_buff.data, dev->tx_buff.len);
if (ret > 0) {
- IRDA_DEBUG(3, "%s(), raw-tx started\n", __func__);
+ pr_debug("%s(), raw-tx started\n", __func__);
dev->tx_buff.data += ret;
dev->tx_buff.len -= ret;
@@ -440,8 +440,8 @@
spin_lock_irqsave(&dev->tx_lock, flags);
- IRDA_DEBUG(3, "%s() - dev->tx_buff.len = %d\n",
- __func__, dev->tx_buff.len);
+ pr_debug("%s() - dev->tx_buff.len = %d\n",
+ __func__, dev->tx_buff.len);
if (likely(dev->tx_buff.len > 0)) {
/* Write data left in transmit buffer */
@@ -475,7 +475,7 @@
* restarted when the irda-thread has completed the request.
*/
- IRDA_DEBUG(3, "%s(), raw-tx done\n", __func__);
+ pr_debug("%s(), raw-tx done\n", __func__);
dev->raw_tx = 0;
goto done; /* no post-frame handling in raw mode */
}
@@ -492,7 +492,7 @@
* re-activated.
*/
- IRDA_DEBUG(5, "%s(), finished with frame!\n", __func__);
+ pr_debug("%s(), finished with frame!\n", __func__);
if ((skb=dev->tx_skb) != NULL) {
dev->tx_skb = NULL;
@@ -502,7 +502,7 @@
}
if (unlikely(dev->new_speed > 0)) {
- IRDA_DEBUG(5, "%s(), Changing speed!\n", __func__);
+ pr_debug("%s(), Changing speed!\n", __func__);
err = sirdev_schedule_speed(dev, dev->new_speed);
if (unlikely(err)) {
/* should never happen
@@ -552,7 +552,7 @@
*/
irda_device_set_media_busy(dev->netdev, TRUE);
dev->netdev->stats.rx_dropped++;
- IRDA_DEBUG(0, "%s; rx-drop: %zd\n", __func__, count);
+ pr_debug("%s; rx-drop: %zd\n", __func__, count);
return 0;
}
@@ -598,7 +598,7 @@
netif_stop_queue(ndev);
- IRDA_DEBUG(3, "%s(), skb->len = %d\n", __func__, skb->len);
+ pr_debug("%s(), skb->len = %d\n", __func__, skb->len);
speed = irda_get_next_speed(skb);
if ((speed != dev->speed) && (speed != -1)) {
@@ -635,7 +635,7 @@
/* Check problems */
if(spin_is_locked(&dev->tx_lock)) {
- IRDA_DEBUG(3, "%s(), write not completed\n", __func__);
+ pr_debug("%s(), write not completed\n", __func__);
}
/* serialize with write completion */
@@ -684,7 +684,7 @@
IRDA_ASSERT(dev != NULL, return -1;);
- IRDA_DEBUG(3, "%s(), %s, (cmd=0x%X)\n", __func__, ndev->name, cmd);
+ pr_debug("%s(), %s, (cmd=0x%X)\n", __func__, ndev->name, cmd);
switch (cmd) {
case SIOCSBANDWIDTH: /* Set bandwidth */
@@ -801,8 +801,6 @@
if (!try_module_get(drv->owner))
return -ESTALE;
- IRDA_DEBUG(2, "%s()\n", __func__);
-
if (sirdev_alloc_buffers(dev))
goto errout_dec;
@@ -819,7 +817,7 @@
netif_wake_queue(ndev);
- IRDA_DEBUG(2, "%s - done, speed = %d\n", __func__, dev->speed);
+ pr_debug("%s - done, speed = %d\n", __func__, dev->speed);
return 0;
@@ -839,7 +837,7 @@
struct sir_dev *dev = netdev_priv(ndev);
const struct sir_driver *drv;
-// IRDA_DEBUG(0, "%s\n", __func__);
+/* pr_debug("%s\n", __func__); */
netif_stop_queue(ndev);
@@ -881,7 +879,7 @@
struct net_device *ndev;
struct sir_dev *dev;
- IRDA_DEBUG(0, "%s - %s\n", __func__, name);
+ pr_debug("%s - %s\n", __func__, name);
/* instead of adding tests to protect against drv->do_write==NULL
* at several places we refuse to create a sir_dev instance for
@@ -939,7 +937,7 @@
{
int err = 0;
- IRDA_DEBUG(0, "%s\n", __func__);
+ pr_debug("%s\n", __func__);
atomic_set(&dev->enable_rx, 0);
diff --git a/drivers/net/irda/sir_dongle.c b/drivers/net/irda/sir_dongle.c
index cfbabb6..7436f73 100644
--- a/drivers/net/irda/sir_dongle.c
+++ b/drivers/net/irda/sir_dongle.c
@@ -34,8 +34,8 @@
struct list_head *entry;
struct dongle_driver *drv;
- IRDA_DEBUG(0, "%s : registering dongle \"%s\" (%d).\n",
- __func__, new->driver_name, new->type);
+ pr_debug("%s : registering dongle \"%s\" (%d).\n",
+ __func__, new->driver_name, new->type);
mutex_lock(&dongle_list_lock);
list_for_each(entry, &dongle_list) {
diff --git a/drivers/net/irda/smsc-ircc2.c b/drivers/net/irda/smsc-ircc2.c
index a7f0f52..b455ffe 100644
--- a/drivers/net/irda/smsc-ircc2.c
+++ b/drivers/net/irda/smsc-ircc2.c
@@ -461,7 +461,7 @@
{
int ret;
- IRDA_DEBUG(1, "%s\n", __func__);
+ pr_debug("%s\n", __func__);
ret = platform_driver_register(&smsc_ircc_driver);
if (ret) {
@@ -523,7 +523,7 @@
struct net_device *dev;
int err;
- IRDA_DEBUG(1, "%s\n", __func__);
+ pr_debug("%s\n", __func__);
err = smsc_ircc_present(fir_base, sir_base);
if (err)
@@ -803,7 +803,7 @@
IRDA_ASSERT(self != NULL, return -1;);
- IRDA_DEBUG(2, "%s(), %s, (cmd=0x%X)\n", __func__, dev->name, cmd);
+ pr_debug("%s(), %s, (cmd=0x%X)\n", __func__, dev->name, cmd);
switch (cmd) {
case SIOCSBANDWIDTH: /* Set bandwidth */
@@ -882,7 +882,7 @@
unsigned long flags;
s32 speed;
- IRDA_DEBUG(1, "%s\n", __func__);
+ pr_debug("%s\n", __func__);
IRDA_ASSERT(dev != NULL, return NETDEV_TX_OK;);
@@ -957,21 +957,21 @@
ir_mode = IRCC_CFGA_IRDA_HDLC;
ctrl = IRCC_CRC;
fast = 0;
- IRDA_DEBUG(0, "%s(), handling baud of 576000\n", __func__);
+ pr_debug("%s(), handling baud of 576000\n", __func__);
break;
case 1152000:
ir_mode = IRCC_CFGA_IRDA_HDLC;
ctrl = IRCC_1152 | IRCC_CRC;
fast = IRCC_LCR_A_FAST | IRCC_LCR_A_GP_DATA;
- IRDA_DEBUG(0, "%s(), handling baud of 1152000\n",
- __func__);
+ pr_debug("%s(), handling baud of 1152000\n",
+ __func__);
break;
case 4000000:
ir_mode = IRCC_CFGA_IRDA_4PPM;
ctrl = IRCC_CRC;
fast = IRCC_LCR_A_FAST;
- IRDA_DEBUG(0, "%s(), handling baud of 4000000\n",
- __func__);
+ pr_debug("%s(), handling baud of 4000000\n",
+ __func__);
break;
}
#if 0
@@ -999,7 +999,7 @@
struct net_device *dev;
int fir_base;
- IRDA_DEBUG(1, "%s\n", __func__);
+ pr_debug("%s\n", __func__);
IRDA_ASSERT(self != NULL, return;);
dev = self->netdev;
@@ -1044,7 +1044,7 @@
{
int fir_base;
- IRDA_DEBUG(1, "%s\n", __func__);
+ pr_debug("%s\n", __func__);
IRDA_ASSERT(self != NULL, return;);
@@ -1068,7 +1068,7 @@
struct net_device *dev;
int last_speed_was_sir;
- IRDA_DEBUG(0, "%s() changing speed to: %d\n", __func__, speed);
+ pr_debug("%s() changing speed to: %d\n", __func__, speed);
IRDA_ASSERT(self != NULL, return;);
dev = self->netdev;
@@ -1136,7 +1136,7 @@
int lcr; /* Line control reg */
int divisor;
- IRDA_DEBUG(0, "%s(), Setting speed to: %d\n", __func__, speed);
+ pr_debug("%s(), Setting speed to: %d\n", __func__, speed);
IRDA_ASSERT(self != NULL, return;);
iobase = self->io.sir_base;
@@ -1171,7 +1171,7 @@
/* Turn on interrups */
outb(UART_IER_RLSI | UART_IER_RDI | UART_IER_THRI, iobase + UART_IER);
- IRDA_DEBUG(2, "%s() speed changed to: %d\n", __func__, speed);
+ pr_debug("%s() speed changed to: %d\n", __func__, speed);
}
@@ -1255,7 +1255,7 @@
int iobase = self->io.fir_base;
u8 ctrl;
- IRDA_DEBUG(3, "%s\n", __func__);
+ pr_debug("%s\n", __func__);
#if 1
/* Disable Rx */
register_bank(iobase, 0);
@@ -1309,7 +1309,7 @@
{
int iobase = self->io.fir_base;
- IRDA_DEBUG(3, "%s\n", __func__);
+ pr_debug("%s\n", __func__);
#if 0
/* Disable Tx */
register_bank(iobase, 0);
@@ -1413,7 +1413,7 @@
register_bank(iobase, 0);
- IRDA_DEBUG(3, "%s\n", __func__);
+ pr_debug("%s\n", __func__);
#if 0
/* Disable Rx */
register_bank(iobase, 0);
@@ -1424,8 +1424,8 @@
lsr= inb(iobase + IRCC_LSR);
msgcnt = inb(iobase + IRCC_LCR_B) & 0x08;
- IRDA_DEBUG(2, "%s: dma count = %d\n", __func__,
- get_dma_residue(self->io.dma));
+ pr_debug("%s: dma count = %d\n", __func__,
+ get_dma_residue(self->io.dma));
len = self->rx_buff.truesize - get_dma_residue(self->io.dma);
@@ -1450,7 +1450,7 @@
net_warn_ratelimited("%s(), bogus len=%d\n", __func__, len);
return;
}
- IRDA_DEBUG(2, "%s: msgcnt = %d, len=%d\n", __func__, msgcnt, len);
+ pr_debug("%s: msgcnt = %d, len=%d\n", __func__, msgcnt, len);
skb = dev_alloc_skb(len + 1);
if (!skb)
@@ -1494,7 +1494,7 @@
/* Make sure we don't stay here to long */
if (boguscount++ > 32) {
- IRDA_DEBUG(2, "%s(), breaking!\n", __func__);
+ pr_debug("%s(), breaking!\n", __func__);
break;
}
} while (inb(iobase + UART_LSR) & UART_LSR_DR);
@@ -1536,7 +1536,7 @@
lcra = inb(iobase + IRCC_LCR_A);
lsr = inb(iobase + IRCC_LSR);
- IRDA_DEBUG(2, "%s(), iir = 0x%02x\n", __func__, iir);
+ pr_debug("%s(), iir = 0x%02x\n", __func__, iir);
if (iir & IRCC_IIR_EOM) {
if (self->io.direction == IO_RECV)
@@ -1586,12 +1586,12 @@
/* Clear interrupt */
lsr = inb(iobase + UART_LSR);
- IRDA_DEBUG(4, "%s(), iir=%02x, lsr=%02x, iobase=%#x\n",
- __func__, iir, lsr, iobase);
+ pr_debug("%s(), iir=%02x, lsr=%02x, iobase=%#x\n",
+ __func__, iir, lsr, iobase);
switch (iir) {
case UART_IIR_RLSI:
- IRDA_DEBUG(2, "%s(), RLSI\n", __func__);
+ pr_debug("%s(), RLSI\n", __func__);
break;
case UART_IIR_RDI:
/* Receive interrupt */
@@ -1603,8 +1603,8 @@
smsc_ircc_sir_write_wakeup(self);
break;
default:
- IRDA_DEBUG(0, "%s(), unhandled IIR=%#x\n",
- __func__, iir);
+ pr_debug("%s(), unhandled IIR=%#x\n",
+ __func__, iir);
break;
}
@@ -1631,12 +1631,12 @@
int status = FALSE;
/* int iobase; */
- IRDA_DEBUG(1, "%s\n", __func__);
+ pr_debug("%s\n", __func__);
IRDA_ASSERT(self != NULL, return FALSE;);
- IRDA_DEBUG(0, "%s: dma count = %d\n", __func__,
- get_dma_residue(self->io.dma));
+ pr_debug("%s: dma count = %d\n", __func__,
+ get_dma_residue(self->io.dma));
status = (self->rx_buff.state != OUTSIDE_FRAME);
@@ -1651,8 +1651,8 @@
error = request_irq(self->io.irq, smsc_ircc_interrupt, 0,
self->netdev->name, self->netdev);
if (error)
- IRDA_DEBUG(0, "%s(), unable to allocate irq=%d, err=%d\n",
- __func__, self->io.irq, error);
+ pr_debug("%s(), unable to allocate irq=%d, err=%d\n",
+ __func__, self->io.irq, error);
return error;
}
@@ -1696,21 +1696,21 @@
struct smsc_ircc_cb *self;
char hwname[16];
- IRDA_DEBUG(1, "%s\n", __func__);
+ pr_debug("%s\n", __func__);
IRDA_ASSERT(dev != NULL, return -1;);
self = netdev_priv(dev);
IRDA_ASSERT(self != NULL, return 0;);
if (self->io.suspended) {
- IRDA_DEBUG(0, "%s(), device is suspended\n", __func__);
+ pr_debug("%s(), device is suspended\n", __func__);
return -EAGAIN;
}
if (request_irq(self->io.irq, smsc_ircc_interrupt, 0, dev->name,
(void *) dev)) {
- IRDA_DEBUG(0, "%s(), unable to allocate irq=%d\n",
- __func__, self->io.irq);
+ pr_debug("%s(), unable to allocate irq=%d\n",
+ __func__, self->io.irq);
return -EAGAIN;
}
@@ -1753,7 +1753,7 @@
{
struct smsc_ircc_cb *self;
- IRDA_DEBUG(1, "%s\n", __func__);
+ pr_debug("%s\n", __func__);
IRDA_ASSERT(dev != NULL, return -1;);
self = netdev_priv(dev);
@@ -1784,7 +1784,7 @@
struct smsc_ircc_cb *self = platform_get_drvdata(dev);
if (!self->io.suspended) {
- IRDA_DEBUG(1, "%s, Suspending\n", driver_name);
+ pr_debug("%s, Suspending\n", driver_name);
rtnl_lock();
if (netif_running(self->netdev)) {
@@ -1805,7 +1805,7 @@
struct smsc_ircc_cb *self = platform_get_drvdata(dev);
if (self->io.suspended) {
- IRDA_DEBUG(1, "%s, Waking up\n", driver_name);
+ pr_debug("%s, Waking up\n", driver_name);
rtnl_lock();
smsc_ircc_init_chip(self);
@@ -1836,7 +1836,7 @@
*/
static int __exit smsc_ircc_close(struct smsc_ircc_cb *self)
{
- IRDA_DEBUG(1, "%s\n", __func__);
+ pr_debug("%s\n", __func__);
IRDA_ASSERT(self != NULL, return -1;);
@@ -1848,13 +1848,13 @@
smsc_ircc_stop_interrupts(self);
/* Release the PORTS that this driver is using */
- IRDA_DEBUG(0, "%s(), releasing 0x%03x\n", __func__,
- self->io.fir_base);
+ pr_debug("%s(), releasing 0x%03x\n", __func__,
+ self->io.fir_base);
release_region(self->io.fir_base, self->io.fir_ext);
- IRDA_DEBUG(0, "%s(), releasing 0x%03x\n", __func__,
- self->io.sir_base);
+ pr_debug("%s(), releasing 0x%03x\n", __func__,
+ self->io.sir_base);
release_region(self->io.sir_base, self->io.sir_ext);
@@ -1875,7 +1875,7 @@
{
int i;
- IRDA_DEBUG(1, "%s\n", __func__);
+ pr_debug("%s\n", __func__);
for (i = 0; i < 2; i++) {
if (dev_self[i])
@@ -1899,7 +1899,7 @@
struct net_device *dev;
int fir_base, sir_base;
- IRDA_DEBUG(3, "%s\n", __func__);
+ pr_debug("%s\n", __func__);
IRDA_ASSERT(self != NULL, return;);
dev = self->netdev;
@@ -1925,7 +1925,7 @@
/* Turn on interrups */
outb(UART_IER_RLSI | UART_IER_RDI |UART_IER_THRI, sir_base + UART_IER);
- IRDA_DEBUG(3, "%s() - exit\n", __func__);
+ pr_debug("%s() - exit\n", __func__);
outb(0x00, fir_base + IRCC_MASTER);
}
@@ -1935,7 +1935,7 @@
{
int iobase;
- IRDA_DEBUG(3, "%s\n", __func__);
+ pr_debug("%s\n", __func__);
iobase = self->io.sir_base;
/* Reset UART */
@@ -1961,7 +1961,7 @@
IRDA_ASSERT(self != NULL, return;);
- IRDA_DEBUG(4, "%s\n", __func__);
+ pr_debug("%s\n", __func__);
iobase = self->io.sir_base;
@@ -1982,8 +1982,8 @@
* if we need to change the speed of the hardware
*/
if (self->new_speed) {
- IRDA_DEBUG(5, "%s(), Changing speed to %d.\n",
- __func__, self->new_speed);
+ pr_debug("%s(), Changing speed to %d.\n",
+ __func__, self->new_speed);
smsc_ircc_sir_wait_hw_transmitter_finish(self);
smsc_ircc_change_speed(self, self->new_speed);
self->new_speed = 0;
@@ -2123,7 +2123,7 @@
udelay(1);
if (count < 0)
- IRDA_DEBUG(0, "%s(): stuck transmitter\n", __func__);
+ pr_debug("%s(): stuck transmitter\n", __func__);
}
@@ -2184,7 +2184,7 @@
u8 mode, dma, irq;
int ret = -ENODEV;
- IRDA_DEBUG(1, "%s\n", __func__);
+ pr_debug("%s\n", __func__);
if (smsc_ircc_probe(cfgbase, SMSCSIOFLAT_DEVICEID_REG, chips, type) == NULL)
return ret;
@@ -2235,7 +2235,7 @@
unsigned short fir_io, sir_io;
int ret = -ENODEV;
- IRDA_DEBUG(1, "%s\n", __func__);
+ pr_debug("%s\n", __func__);
if (smsc_ircc_probe(cfg_base, 0x20, chips, type) == NULL)
return ret;
@@ -2269,7 +2269,7 @@
static int __init smsc_access(unsigned short cfg_base, unsigned char reg)
{
- IRDA_DEBUG(1, "%s\n", __func__);
+ pr_debug("%s\n", __func__);
outb(reg, cfg_base);
return inb(cfg_base) != reg ? -1 : 0;
@@ -2279,7 +2279,7 @@
{
u8 devid, xdevid, rev;
- IRDA_DEBUG(1, "%s\n", __func__);
+ pr_debug("%s\n", __func__);
/* Leave configuration */
@@ -2534,9 +2534,8 @@
outb(LPC47N227_CFGACCESSKEY, iobase); // enter configuration state
outb(SMSCSIOFLAT_DEVICEID_REG, iobase); // set for device ID
tmpbyte = inb(iobase +1); // Read device ID
- IRDA_DEBUG(0,
- "Detected Chip id: 0x%02x, setting up registers...\n",
- tmpbyte);
+ pr_debug("Detected Chip id: 0x%02x, setting up registers...\n",
+ tmpbyte);
/* Disable UART1 and set up SIR I/O port */
outb(0x24, iobase); // select CR24 - UART1 base addr
@@ -2682,7 +2681,7 @@
default:
tmpbyte |= 0x01; /* COM2 default */
}
- IRDA_DEBUG(1, "COM_DEC (write): 0x%02x\n", tmpbyte);
+ pr_debug("COM_DEC (write): 0x%02x\n", tmpbyte);
pci_write_config_byte(dev, COM_DEC, tmpbyte);
/* Enable Low Pin Count interface */
@@ -2710,7 +2709,7 @@
}
tmpword &= 0xfffd; /* disable LPC COMB */
tmpword |= 0x0001; /* set bit 0 : enable LPC COMA addr range (GEN2) */
- IRDA_DEBUG(1, "LPC_EN (write): 0x%04x\n", tmpword);
+ pr_debug("LPC_EN (write): 0x%04x\n", tmpword);
pci_write_config_word(dev, LPC_EN, tmpword);
/*
@@ -2755,7 +2754,7 @@
default:
break; /* do not change settings */
}
- IRDA_DEBUG(1, "PCI_DMA_C (write): 0x%04x\n", tmpword);
+ pr_debug("PCI_DMA_C (write): 0x%04x\n", tmpword);
pci_write_config_word(dev, PCI_DMA_C, tmpword);
/*
@@ -2766,7 +2765,7 @@
*/
tmpword = conf->fir_io & 0xfff8;
tmpword |= 0x0001;
- IRDA_DEBUG(1, "GEN2_DEC (write): 0x%04x\n", tmpword);
+ pr_debug("GEN2_DEC (write): 0x%04x\n", tmpword);
pci_write_config_word(dev, GEN2_DEC, tmpword);
/* Pre-configure chip */
diff --git a/drivers/net/irda/tekram-sir.c b/drivers/net/irda/tekram-sir.c
index 04db4ea..9dcf0c1 100644
--- a/drivers/net/irda/tekram-sir.c
+++ b/drivers/net/irda/tekram-sir.c
@@ -63,8 +63,8 @@
{
if (tekram_delay < 1 || tekram_delay > 500)
tekram_delay = 200;
- IRDA_DEBUG(1, "%s - using %d ms delay\n",
- tekram.driver_name, tekram_delay);
+ pr_debug("%s - using %d ms delay\n",
+ tekram.driver_name, tekram_delay);
return irda_register_dongle(&tekram);
}
@@ -77,8 +77,6 @@
{
struct qos_info *qos = &dev->qos;
- IRDA_DEBUG(2, "%s()\n", __func__);
-
sirdev_set_dtr_rts(dev, TRUE, TRUE);
qos->baud_rate.bits &= IR_9600|IR_19200|IR_38400|IR_57600|IR_115200;
@@ -92,8 +90,6 @@
static int tekram_close(struct sir_dev *dev)
{
- IRDA_DEBUG(2, "%s()\n", __func__);
-
/* Power off dongle */
sirdev_set_dtr_rts(dev, FALSE, FALSE);
@@ -130,8 +126,6 @@
u8 byte;
static int ret = 0;
- IRDA_DEBUG(2, "%s()\n", __func__);
-
switch(state) {
case SIRDEV_STATE_DONGLE_SPEED:
@@ -205,8 +199,6 @@
static int tekram_reset(struct sir_dev *dev)
{
- IRDA_DEBUG(2, "%s()\n", __func__);
-
/* Clear DTR, Set RTS */
sirdev_set_dtr_rts(dev, FALSE, TRUE);
diff --git a/drivers/net/irda/toim3232-sir.c b/drivers/net/irda/toim3232-sir.c
index 19ad460..6d2f559 100644
--- a/drivers/net/irda/toim3232-sir.c
+++ b/drivers/net/irda/toim3232-sir.c
@@ -168,8 +168,8 @@
{
if (toim3232delay < 1 || toim3232delay > 500)
toim3232delay = 200;
- IRDA_DEBUG(1, "%s - using %d ms delay\n",
- toim3232.driver_name, toim3232delay);
+ pr_debug("%s - using %d ms delay\n",
+ toim3232.driver_name, toim3232delay);
return irda_register_dongle(&toim3232);
}
@@ -182,8 +182,6 @@
{
struct qos_info *qos = &dev->qos;
- IRDA_DEBUG(2, "%s()\n", __func__);
-
/* Pull the lines high to start with.
*
* For the IR320ST-2, we need to charge the main supply capacitor to
@@ -210,8 +208,6 @@
static int toim3232_close(struct sir_dev *dev)
{
- IRDA_DEBUG(2, "%s()\n", __func__);
-
/* Power off dongle */
sirdev_set_dtr_rts(dev, FALSE, FALSE);
@@ -242,8 +238,6 @@
u8 byte;
static int ret = 0;
- IRDA_DEBUG(2, "%s()\n", __func__);
-
switch(state) {
case SIRDEV_STATE_DONGLE_SPEED:
@@ -345,8 +339,6 @@
static int toim3232_reset(struct sir_dev *dev)
{
- IRDA_DEBUG(2, "%s()\n", __func__);
-
/* Switch off both DTR and RTS to switch off dongle */
sirdev_set_dtr_rts(dev, FALSE, FALSE);
diff --git a/drivers/net/irda/via-ircc.c b/drivers/net/irda/via-ircc.c
index b07b4cc..6960d4c 100644
--- a/drivers/net/irda/via-ircc.c
+++ b/drivers/net/irda/via-ircc.c
@@ -144,12 +144,10 @@
{
int rc;
- IRDA_DEBUG(3, "%s()\n", __func__);
-
rc = pci_register_driver(&via_driver);
if (rc < 0) {
- IRDA_DEBUG(0, "%s(): error rc = %d, returning -ENODEV...\n",
- __func__, rc);
+ pr_debug("%s(): error rc = %d, returning -ENODEV...\n",
+ __func__, rc);
return -ENODEV;
}
return 0;
@@ -162,11 +160,11 @@
u16 Chipset,FirDRQ1,FirDRQ0,FirIRQ,FirIOBase;
chipio_t info;
- IRDA_DEBUG(2, "%s(): Device ID=(0X%X)\n", __func__, id->device);
+ pr_debug("%s(): Device ID=(0X%X)\n", __func__, id->device);
rc = pci_enable_device (pcidev);
if (rc) {
- IRDA_DEBUG(0, "%s(): error rc = %d\n", __func__, rc);
+ pr_debug("%s(): error rc = %d\n", __func__, rc);
return -ENODEV;
}
@@ -177,7 +175,7 @@
Chipset=0x3076;
if (Chipset==0x3076) {
- IRDA_DEBUG(2, "%s(): Chipset = 3076\n", __func__);
+ pr_debug("%s(): Chipset = 3076\n", __func__);
WriteLPCReg(7,0x0c );
temp=ReadLPCReg(0x30);//check if BIOS Enable Fir
@@ -213,7 +211,7 @@
} else
rc = -ENODEV; //IR not turn on
} else { //Not VT1211
- IRDA_DEBUG(2, "%s(): Chipset = 3096\n", __func__);
+ pr_debug("%s(): Chipset = 3096\n", __func__);
pci_read_config_byte(pcidev,0x67,&bTmp);//check if BIOS Enable Fir
if((bTmp&0x01)==1) { // BIOS enable FIR
@@ -252,14 +250,12 @@
rc = -ENODEV; //IR not turn on !!!!!
}//Not VT1211
- IRDA_DEBUG(2, "%s(): End - rc = %d\n", __func__, rc);
+ pr_debug("%s(): End - rc = %d\n", __func__, rc);
return rc;
}
static void __exit via_ircc_cleanup(void)
{
- IRDA_DEBUG(3, "%s()\n", __func__);
-
/* Cleanup all instances of the driver */
pci_unregister_driver (&via_driver);
}
@@ -289,8 +285,6 @@
struct via_ircc_cb *self;
int err;
- IRDA_DEBUG(3, "%s()\n", __func__);
-
/* Allocate new instance of the driver */
dev = alloc_irdadev(sizeof(struct via_ircc_cb));
if (dev == NULL)
@@ -316,8 +310,8 @@
/* Reserve the ioports that we need */
if (!request_region(self->io.fir_base, self->io.fir_ext, driver_name)) {
- IRDA_DEBUG(0, "%s(), can't get iobase of 0x%03x\n",
- __func__, self->io.fir_base);
+ pr_debug("%s(), can't get iobase of 0x%03x\n",
+ __func__, self->io.fir_base);
err = -ENODEV;
goto err_out1;
}
@@ -423,8 +417,6 @@
struct via_ircc_cb *self = pci_get_drvdata(pdev);
int iobase;
- IRDA_DEBUG(3, "%s()\n", __func__);
-
iobase = self->io.fir_base;
ResetChip(iobase, 5); //hardware reset.
@@ -432,8 +424,8 @@
unregister_netdev(self->netdev);
/* Release the PORT that this driver is using */
- IRDA_DEBUG(2, "%s(), Releasing Region %03x\n",
- __func__, self->io.fir_base);
+ pr_debug("%s(), Releasing Region %03x\n",
+ __func__, self->io.fir_base);
release_region(self->io.fir_base, self->io.fir_ext);
if (self->tx_buff.head)
dma_free_coherent(&pdev->dev, self->tx_buff.truesize,
@@ -458,8 +450,6 @@
{
int iobase = self->io.fir_base;
- IRDA_DEBUG(3, "%s()\n", __func__);
-
SetMaxRxPacketSize(iobase, 0x0fff); //set to max:4095
// FIFO Init
EnRXFIFOReadyInt(iobase, OFF);
@@ -528,8 +518,8 @@
/* speed is unused, as we use IsSIROn()/IsMIROn() */
speed = speed;
- IRDA_DEBUG(1, "%s(): change_dongle_speed to %d for 0x%x, %d\n",
- __func__, speed, iobase, dongle_id);
+ pr_debug("%s(): change_dongle_speed to %d for 0x%x, %d\n",
+ __func__, speed, iobase, dongle_id);
switch (dongle_id) {
@@ -618,7 +608,8 @@
case 0x11: /* Temic TFDS4500 */
- IRDA_DEBUG(2, "%s: Temic TFDS4500: One RX pin, TX normal, RX inverted.\n", __func__);
+ pr_debug("%s: Temic TFDS4500: One RX pin, TX normal, RX inverted\n",
+ __func__);
UseOneRX(iobase, ON); //use ONE RX....RX1
InvertTX(iobase, OFF);
@@ -636,7 +627,8 @@
SlowIRRXLowActive(iobase, OFF);
} else{
- IRDA_DEBUG(0, "%s: Warning: TFDS4500 not running in SIR mode !\n", __func__);
+ pr_debug("%s: Warning: TFDS4500 not running in SIR mode !\n",
+ __func__);
}
break;
@@ -673,7 +665,7 @@
iobase = self->io.fir_base;
/* Update accounting for new speed */
self->io.speed = speed;
- IRDA_DEBUG(1, "%s: change_speed to %d bps.\n", __func__, speed);
+ pr_debug("%s: change_speed to %d bps.\n", __func__, speed);
WriteReg(iobase, I_ST_CT_0, 0x0);
@@ -903,10 +895,10 @@
((u8 *)self->tx_fifo.queue[self->tx_fifo.ptr].start -
self->tx_buff.head) + self->tx_buff_dma,
self->tx_fifo.queue[self->tx_fifo.ptr].len, DMA_TX_MODE);
- IRDA_DEBUG(1, "%s: tx_fifo.ptr=%x,len=%x,tx_fifo.len=%x..\n",
- __func__, self->tx_fifo.ptr,
- self->tx_fifo.queue[self->tx_fifo.ptr].len,
- self->tx_fifo.len);
+ pr_debug("%s: tx_fifo.ptr=%x,len=%x,tx_fifo.len=%x..\n",
+ __func__, self->tx_fifo.ptr,
+ self->tx_fifo.queue[self->tx_fifo.ptr].len,
+ self->tx_fifo.len);
SetSendByte(iobase, self->tx_fifo.queue[self->tx_fifo.ptr].len);
RXStart(iobase, OFF);
@@ -927,8 +919,6 @@
int iobase;
u8 Tx_status;
- IRDA_DEBUG(3, "%s()\n", __func__);
-
iobase = self->io.fir_base;
/* Disable DMA */
// DisableDmaChannel(self->io.dma);
@@ -958,10 +948,9 @@
self->tx_fifo.ptr++;
}
}
- IRDA_DEBUG(1,
- "%s: tx_fifo.len=%x ,tx_fifo.ptr=%x,tx_fifo.free=%x...\n",
- __func__,
- self->tx_fifo.len, self->tx_fifo.ptr, self->tx_fifo.free);
+ pr_debug("%s: tx_fifo.len=%x ,tx_fifo.ptr=%x,tx_fifo.free=%x...\n",
+ __func__,
+ self->tx_fifo.len, self->tx_fifo.ptr, self->tx_fifo.free);
/* F01_S
// Any frames to be sent back-to-back?
if (self->tx_fifo.len) {
@@ -996,8 +985,6 @@
iobase = self->io.fir_base;
- IRDA_DEBUG(3, "%s()\n", __func__);
-
self->tx_fifo.len = self->tx_fifo.ptr = self->tx_fifo.free = 0;
self->tx_fifo.tail = self->tx_buff.head;
self->RxDataReady = 0;
@@ -1079,15 +1066,15 @@
if (len == 0)
return TRUE; //interrupt only, data maybe move by RxT
if (((len - 4) < 2) || ((len - 4) > 2048)) {
- IRDA_DEBUG(1, "%s(): Trouble:len=%x,CurCount=%x,LastCount=%x..\n",
- __func__, len, RxCurCount(iobase, self),
- self->RxLastCount);
+ pr_debug("%s(): Trouble:len=%x,CurCount=%x,LastCount=%x\n",
+ __func__, len, RxCurCount(iobase, self),
+ self->RxLastCount);
hwreset(self);
return FALSE;
}
- IRDA_DEBUG(2, "%s(): fifo.len=%x,len=%x,CurCount=%x..\n",
- __func__,
- st_fifo->len, len - 4, RxCurCount(iobase, self));
+ pr_debug("%s(): fifo.len=%x,len=%x,CurCount=%x..\n",
+ __func__,
+ st_fifo->len, len - 4, RxCurCount(iobase, self));
st_fifo->entries[st_fifo->tail].status = status;
st_fifo->entries[st_fifo->tail].len = len;
@@ -1134,8 +1121,8 @@
skb_put(skb, len - 4);
skb_copy_to_linear_data(skb, self->rx_buff.data, len - 4);
- IRDA_DEBUG(2, "%s(): len=%x.rx_buff=%p\n", __func__,
- len - 4, self->rx_buff.data);
+ pr_debug("%s(): len=%x.rx_buff=%p\n", __func__,
+ len - 4, self->rx_buff.data);
// Move to next frame
self->rx_buff.data += len;
@@ -1164,7 +1151,7 @@
len = GetRecvByte(iobase, self);
- IRDA_DEBUG(2, "%s(): len=%x\n", __func__, len);
+ pr_debug("%s(): len=%x\n", __func__, len);
if ((len - 4) < 2) {
self->netdev->stats.rx_dropped++;
@@ -1249,8 +1236,8 @@
skb_put(skb, len - 4);
skb_copy_to_linear_data(skb, self->rx_buff.data, len - 4);
- IRDA_DEBUG(2, "%s(): len=%x.head=%x\n", __func__,
- len - 4, st_fifo->head);
+ pr_debug("%s(): len=%x.head=%x\n", __func__,
+ len - 4, st_fifo->head);
// Move to next frame
self->rx_buff.data += len;
@@ -1263,10 +1250,8 @@
} //while
self->RetryCount = 0;
- IRDA_DEBUG(2,
- "%s(): End of upload HostStatus=%x,RxStatus=%x\n",
- __func__,
- GetHostStatus(iobase), GetRXStatus(iobase));
+ pr_debug("%s(): End of upload HostStatus=%x,RxStatus=%x\n",
+ __func__, GetHostStatus(iobase), GetRXStatus(iobase));
/*
* if frame is receive complete at this routine ,then upload
@@ -1304,12 +1289,12 @@
spin_lock(&self->lock);
iHostIntType = GetHostStatus(iobase);
- IRDA_DEBUG(4, "%s(): iHostIntType %02x: %s %s %s %02x\n",
- __func__, iHostIntType,
- (iHostIntType & 0x40) ? "Timer" : "",
- (iHostIntType & 0x20) ? "Tx" : "",
- (iHostIntType & 0x10) ? "Rx" : "",
- (iHostIntType & 0x0e) >> 1);
+ pr_debug("%s(): iHostIntType %02x: %s %s %s %02x\n",
+ __func__, iHostIntType,
+ (iHostIntType & 0x40) ? "Timer" : "",
+ (iHostIntType & 0x20) ? "Tx" : "",
+ (iHostIntType & 0x10) ? "Rx" : "",
+ (iHostIntType & 0x0e) >> 1);
if ((iHostIntType & 0x40) != 0) { //Timer Event
self->EventFlag.TimeOut++;
@@ -1334,12 +1319,12 @@
if ((iHostIntType & 0x20) != 0) { //Tx Event
iTxIntType = GetTXStatus(iobase);
- IRDA_DEBUG(4, "%s(): iTxIntType %02x: %s %s %s %s\n",
- __func__, iTxIntType,
- (iTxIntType & 0x08) ? "FIFO underr." : "",
- (iTxIntType & 0x04) ? "EOM" : "",
- (iTxIntType & 0x02) ? "FIFO ready" : "",
- (iTxIntType & 0x01) ? "Early EOM" : "");
+ pr_debug("%s(): iTxIntType %02x: %s %s %s %s\n",
+ __func__, iTxIntType,
+ (iTxIntType & 0x08) ? "FIFO underr." : "",
+ (iTxIntType & 0x04) ? "EOM" : "",
+ (iTxIntType & 0x02) ? "FIFO ready" : "",
+ (iTxIntType & 0x01) ? "Early EOM" : "");
if (iTxIntType & 0x4) {
self->EventFlag.EOMessage++; // read and will auto clean
@@ -1358,17 +1343,17 @@
/* Check if DMA has finished */
iRxIntType = GetRXStatus(iobase);
- IRDA_DEBUG(4, "%s(): iRxIntType %02x: %s %s %s %s %s %s %s\n",
- __func__, iRxIntType,
- (iRxIntType & 0x80) ? "PHY err." : "",
- (iRxIntType & 0x40) ? "CRC err" : "",
- (iRxIntType & 0x20) ? "FIFO overr." : "",
- (iRxIntType & 0x10) ? "EOF" : "",
- (iRxIntType & 0x08) ? "RxData" : "",
- (iRxIntType & 0x02) ? "RxMaxLen" : "",
- (iRxIntType & 0x01) ? "SIR bad" : "");
+ pr_debug("%s(): iRxIntType %02x: %s %s %s %s %s %s %s\n",
+ __func__, iRxIntType,
+ (iRxIntType & 0x80) ? "PHY err." : "",
+ (iRxIntType & 0x40) ? "CRC err" : "",
+ (iRxIntType & 0x20) ? "FIFO overr." : "",
+ (iRxIntType & 0x10) ? "EOF" : "",
+ (iRxIntType & 0x08) ? "RxData" : "",
+ (iRxIntType & 0x02) ? "RxMaxLen" : "",
+ (iRxIntType & 0x01) ? "SIR bad" : "");
if (!iRxIntType)
- IRDA_DEBUG(3, "%s(): RxIRQ =0\n", __func__);
+ pr_debug("%s(): RxIRQ =0\n", __func__);
if (iRxIntType & 0x10) {
if (via_ircc_dma_receive_complete(self, iobase)) {
@@ -1377,10 +1362,9 @@
}
} // No ERR
else { //ERR
- IRDA_DEBUG(4, "%s(): RxIRQ ERR:iRxIntType=%x,HostIntType=%x,CurCount=%x,RxLastCount=%x_____\n",
- __func__, iRxIntType, iHostIntType,
- RxCurCount(iobase, self),
- self->RxLastCount);
+ pr_debug("%s(): RxIRQ ERR:iRxIntType=%x,HostIntType=%x,CurCount=%x,RxLastCount=%x_____\n",
+ __func__, iRxIntType, iHostIntType,
+ RxCurCount(iobase, self), self->RxLastCount);
if (iRxIntType & 0x20) { //FIFO OverRun ERR
ResetChip(iobase, 0);
@@ -1403,8 +1387,6 @@
int iobase;
iobase = self->io.fir_base;
- IRDA_DEBUG(3, "%s()\n", __func__);
-
ResetChip(iobase, 5);
EnableDMA(iobase, OFF);
EnableTX(iobase, OFF);
@@ -1448,7 +1430,7 @@
if (CkRxRecv(iobase, self))
status = TRUE;
- IRDA_DEBUG(2, "%s(): status=%x....\n", __func__, status);
+ pr_debug("%s(): status=%x....\n", __func__, status);
return status;
}
@@ -1466,8 +1448,6 @@
int iobase;
char hwname[32];
- IRDA_DEBUG(3, "%s()\n", __func__);
-
IRDA_ASSERT(dev != NULL, return -1;);
self = netdev_priv(dev);
dev->stats.rx_packets = 0;
@@ -1533,8 +1513,6 @@
struct via_ircc_cb *self;
int iobase;
- IRDA_DEBUG(3, "%s()\n", __func__);
-
IRDA_ASSERT(dev != NULL, return -1;);
self = netdev_priv(dev);
IRDA_ASSERT(self != NULL, return 0;);
@@ -1577,8 +1555,8 @@
IRDA_ASSERT(dev != NULL, return -1;);
self = netdev_priv(dev);
IRDA_ASSERT(self != NULL, return -1;);
- IRDA_DEBUG(1, "%s(), %s, (cmd=0x%X)\n", __func__, dev->name,
- cmd);
+ pr_debug("%s(), %s, (cmd=0x%X)\n", __func__, dev->name,
+ cmd);
/* Disable interrupts & save flags */
spin_lock_irqsave(&self->lock, flags);
switch (cmd) {
diff --git a/drivers/net/irda/vlsi_ir.c b/drivers/net/irda/vlsi_ir.c
index fd4dede..ac39d9f 100644
--- a/drivers/net/irda/vlsi_ir.c
+++ b/drivers/net/irda/vlsi_ir.c
@@ -556,7 +556,7 @@
crclen = (idev->mode==IFF_FIR) ? sizeof(u32) : sizeof(u16);
len -= crclen; /* remove trailing CRC */
if (len <= 0) {
- IRDA_DEBUG(0, "%s: strange frame (len=%d)\n", __func__, len);
+ pr_debug("%s: strange frame (len=%d)\n", __func__, len);
ret |= VLSI_RX_DROP;
goto done;
}
@@ -571,7 +571,7 @@
*/
le16_to_cpus(rd->buf+len);
if (irda_calc_crc16(INIT_FCS,rd->buf,len+crclen) != GOOD_FCS) {
- IRDA_DEBUG(0, "%s: crc error\n", __func__);
+ pr_debug("%s: crc error\n", __func__);
ret |= VLSI_RX_CRC;
goto done;
}
@@ -689,7 +689,7 @@
if (rd_is_active(rd)) {
rd_set_status(rd, 0);
if (rd_get_count(rd)) {
- IRDA_DEBUG(0, "%s - dropping rx packet\n", __func__);
+ pr_debug("%s - dropping rx packet\n", __func__);
ret = -VLSI_RX_DROP;
}
rd_set_count(rd, 0);
@@ -764,7 +764,7 @@
int fifocnt;
baudrate = idev->new_baud;
- IRDA_DEBUG(2, "%s: %d -> %d\n", __func__, idev->baud, idev->new_baud);
+ pr_debug("%s: %d -> %d\n", __func__, idev->baud, idev->new_baud);
if (baudrate == 4000000) {
mode = IFF_FIR;
config = IRCFG_FIR;
@@ -798,7 +798,7 @@
fifocnt = inw(iobase+VLSI_PIO_RCVBCNT) & RCVBCNT_MASK;
if (fifocnt != 0) {
- IRDA_DEBUG(0, "%s: rx fifo not empty(%d)\n", __func__, fifocnt);
+ pr_debug("%s: rx fifo not empty(%d)\n", __func__, fifocnt);
}
outw(0, iobase+VLSI_PIO_IRENABLE);
@@ -1022,7 +1022,8 @@
fifocnt = inw(ndev->base_addr+VLSI_PIO_RCVBCNT) & RCVBCNT_MASK;
if (fifocnt != 0) {
- IRDA_DEBUG(0, "%s: rx fifo not empty(%d)\n", __func__, fifocnt);
+ pr_debug("%s: rx fifo not empty(%d)\n",
+ __func__, fifocnt);
}
config = inw(iobase+VLSI_PIO_IRCFG);
@@ -1034,7 +1035,7 @@
if (ring_put(r) == NULL) {
netif_stop_queue(ndev);
- IRDA_DEBUG(3, "%s: tx ring full - queue stopped\n", __func__);
+ pr_debug("%s: tx ring full - queue stopped\n", __func__);
}
spin_unlock_irqrestore(&idev->lock, flags);
@@ -1099,8 +1100,8 @@
fifocnt = inw(iobase+VLSI_PIO_RCVBCNT) & RCVBCNT_MASK;
if (fifocnt != 0) {
- IRDA_DEBUG(0, "%s: rx fifo not empty(%d)\n",
- __func__, fifocnt);
+ pr_debug("%s: rx fifo not empty(%d)\n",
+ __func__, fifocnt);
}
outw(config | IRCFG_ENTX, iobase+VLSI_PIO_IRCFG);
}
@@ -1109,7 +1110,7 @@
if (netif_queue_stopped(ndev) && !idev->new_baud) {
netif_wake_queue(ndev);
- IRDA_DEBUG(3, "%s: queue awoken\n", __func__);
+ pr_debug("%s: queue awoken\n", __func__);
}
}
@@ -1133,7 +1134,7 @@
dev_kfree_skb_any(rd->skb);
rd->skb = NULL;
}
- IRDA_DEBUG(0, "%s - dropping tx packet\n", __func__);
+ pr_debug("%s - dropping tx packet\n", __func__);
ret = -VLSI_TX_DROP;
}
else
@@ -1191,8 +1192,8 @@
else /* was: clksrc=0(auto) */
clksrc = 3; /* fallback to 40MHz XCLK (OB800) */
- IRDA_DEBUG(0, "%s: PLL not locked, fallback to clksrc=%d\n",
- __func__, clksrc);
+ pr_debug("%s: PLL not locked, fallback to clksrc=%d\n",
+ __func__, clksrc);
}
else
clksrc = 1; /* got successful PLL lock */
diff --git a/drivers/net/irda/w83977af_ir.c b/drivers/net/irda/w83977af_ir.c
index 86ca123..4e3d2e7 100644
--- a/drivers/net/irda/w83977af_ir.c
+++ b/drivers/net/irda/w83977af_ir.c
@@ -110,8 +110,6 @@
{
int i;
- IRDA_DEBUG(0, "%s()\n", __func__ );
-
for (i=0; i < ARRAY_SIZE(dev_self) && io[i] < 2000; i++) {
if (w83977af_open(i, io[i], irq[i], dma[i]) == 0)
return 0;
@@ -129,8 +127,6 @@
{
int i;
- IRDA_DEBUG(4, "%s()\n", __func__ );
-
for (i=0; i < ARRAY_SIZE(dev_self); i++) {
if (dev_self[i])
w83977af_close(dev_self[i]);
@@ -157,12 +153,10 @@
struct w83977af_ir *self;
int err;
- IRDA_DEBUG(0, "%s()\n", __func__ );
-
/* Lock the port that we need */
if (!request_region(iobase, CHIP_IO_EXTENT, driver_name)) {
- IRDA_DEBUG(0, "%s(), can't get iobase of 0x%03x\n",
- __func__ , iobase);
+ pr_debug("%s(), can't get iobase of 0x%03x\n",
+ __func__ , iobase);
return -ENODEV;
}
@@ -269,8 +263,6 @@
{
int iobase;
- IRDA_DEBUG(0, "%s()\n", __func__ );
-
iobase = self->io.fir_base;
#ifdef CONFIG_USE_W977_PNP
@@ -289,8 +281,8 @@
unregister_netdev(self->netdev);
/* Release the PORT that this driver is using */
- IRDA_DEBUG(0 , "%s(), Releasing Region %03x\n",
- __func__ , self->io.fir_base);
+ pr_debug("%s(), Releasing Region %03x\n",
+ __func__ , self->io.fir_base);
release_region(self->io.fir_base, self->io.fir_ext);
if (self->tx_buff.head)
@@ -312,7 +304,6 @@
int i;
for (i=0; i < 2; i++) {
- IRDA_DEBUG( 0, "%s()\n", __func__ );
#ifdef CONFIG_USE_W977_PNP
/* Enter PnP configuration mode */
w977_efm_enter(efbase[i]);
@@ -399,7 +390,7 @@
return 0;
} else {
/* Try next extented function register address */
- IRDA_DEBUG( 0, "%s(), Wrong chip version", __func__ );
+ pr_debug("%s(), Wrong chip version", __func__);
}
}
return -1;
@@ -435,19 +426,19 @@
case 115200: outb(0x01, iobase+ABLL); break;
case 576000:
ir_mode = HCR_MIR_576;
- IRDA_DEBUG(0, "%s(), handling baud of 576000\n", __func__ );
+ pr_debug("%s(), handling baud of 576000\n", __func__);
break;
case 1152000:
ir_mode = HCR_MIR_1152;
- IRDA_DEBUG(0, "%s(), handling baud of 1152000\n", __func__ );
+ pr_debug("%s(), handling baud of 1152000\n", __func__);
break;
case 4000000:
ir_mode = HCR_FIR;
- IRDA_DEBUG(0, "%s(), handling baud of 4000000\n", __func__ );
+ pr_debug("%s(), handling baud of 4000000\n", __func__);
break;
default:
ir_mode = HCR_FIR;
- IRDA_DEBUG(0, "%s(), unknown baud rate of %d\n", __func__ , speed);
+ pr_debug("%s(), unknown baud rate of %d\n", __func__ , speed);
break;
}
@@ -498,8 +489,8 @@
iobase = self->io.fir_base;
- IRDA_DEBUG(4, "%s(%ld), skb->len=%d\n", __func__ , jiffies,
- (int) skb->len);
+ pr_debug("%s(%ld), skb->len=%d\n", __func__ , jiffies,
+ (int)skb->len);
/* Lock transmit buffer */
netif_stop_queue(dev);
@@ -526,7 +517,7 @@
self->tx_buff.len = skb->len;
mtt = irda_get_mtt(skb);
- IRDA_DEBUG(4, "%s(%ld), mtt=%d\n", __func__ , jiffies, mtt);
+ pr_debug("%s(%ld), mtt=%d\n", __func__ , jiffies, mtt);
if (mtt)
udelay(mtt);
@@ -560,7 +551,7 @@
static void w83977af_dma_write(struct w83977af_ir *self, int iobase)
{
__u8 set;
- IRDA_DEBUG(4, "%s(), len=%d\n", __func__ , self->tx_buff.len);
+ pr_debug("%s(), len=%d\n", __func__ , self->tx_buff.len);
/* Save current set */
set = inb(iobase+SSR);
@@ -595,19 +586,16 @@
int actual = 0;
__u8 set;
- IRDA_DEBUG(4, "%s()\n", __func__ );
-
/* Save current bank */
set = inb(iobase+SSR);
switch_bank(iobase, SET0);
if (!(inb_p(iobase+USR) & USR_TSRE)) {
- IRDA_DEBUG(4,
- "%s(), warning, FIFO not empty yet!\n", __func__ );
+ pr_debug("%s(), warning, FIFO not empty yet!\n", __func__);
fifo_size -= 17;
- IRDA_DEBUG(4, "%s(), %d bytes left in tx fifo\n",
- __func__ , fifo_size);
+ pr_debug("%s(), %d bytes left in tx fifo\n",
+ __func__ , fifo_size);
}
/* Fill FIFO with current frame */
@@ -616,8 +604,8 @@
outb(buf[actual++], iobase+TBR);
}
- IRDA_DEBUG(4, "%s(), fifo_size %d ; %d sent of %d\n",
- __func__ , fifo_size, actual, len);
+ pr_debug("%s(), fifo_size %d ; %d sent of %d\n",
+ __func__ , fifo_size, actual, len);
/* Restore bank */
outb(set, iobase+SSR);
@@ -637,7 +625,7 @@
int iobase;
__u8 set;
- IRDA_DEBUG(4, "%s(%ld)\n", __func__ , jiffies);
+ pr_debug("%s(%ld)\n", __func__ , jiffies);
IRDA_ASSERT(self != NULL, return;);
@@ -652,7 +640,7 @@
/* Check for underrun! */
if (inb(iobase+AUDR) & AUDR_UNDR) {
- IRDA_DEBUG(0, "%s(), Transmit underrun!\n", __func__ );
+ pr_debug("%s(), Transmit underrun!\n", __func__);
self->netdev->stats.tx_errors++;
self->netdev->stats.tx_fifo_errors++;
@@ -693,7 +681,7 @@
#endif
IRDA_ASSERT(self != NULL, return -1;);
- IRDA_DEBUG(4, "%s\n", __func__ );
+ pr_debug("%s\n", __func__);
iobase= self->io.fir_base;
@@ -764,7 +752,7 @@
__u8 set;
__u8 status;
- IRDA_DEBUG(4, "%s\n", __func__ );
+ pr_debug("%s\n", __func__);
st_fifo = &self->st_fifo;
@@ -881,8 +869,6 @@
__u8 byte = 0x00;
int iobase;
- IRDA_DEBUG(4, "%s()\n", __func__ );
-
IRDA_ASSERT(self != NULL, return;);
iobase = self->io.fir_base;
@@ -908,7 +894,7 @@
__u8 set;
int iobase;
- IRDA_DEBUG(4, "%s(), isr=%#x\n", __func__ , isr);
+ pr_debug("%s(), isr=%#x\n", __func__ , isr);
iobase = self->io.fir_base;
/* Transmit FIFO low on data */
@@ -944,8 +930,7 @@
if (isr & ISR_TXEMP_I) {
/* Check if we need to change the speed? */
if (self->new_speed) {
- IRDA_DEBUG(2,
- "%s(), Changing speed!\n", __func__ );
+ pr_debug("%s(), Changing speed!\n", __func__);
w83977af_change_speed(self, self->new_speed);
self->new_speed = 0;
}
@@ -1127,7 +1112,6 @@
char hwname[32];
__u8 set;
- IRDA_DEBUG(0, "%s()\n", __func__ );
IRDA_ASSERT(dev != NULL, return -1;);
self = netdev_priv(dev);
@@ -1190,8 +1174,6 @@
int iobase;
__u8 set;
- IRDA_DEBUG(0, "%s()\n", __func__ );
-
IRDA_ASSERT(dev != NULL, return -1;);
self = netdev_priv(dev);
@@ -1245,7 +1227,7 @@
IRDA_ASSERT(self != NULL, return -1;);
- IRDA_DEBUG(2, "%s(), %s, (cmd=0x%X)\n", __func__ , dev->name, cmd);
+ pr_debug("%s(), %s, (cmd=0x%X)\n", __func__ , dev->name, cmd);
spin_lock_irqsave(&self->lock, flags);