| Queue sysfs files |
| ================= |
| |
| This text file will detail the queue files that are located in the sysfs tree |
| for each block device. Note that stacked devices typically do not export |
| any settings, since their queue merely functions are a remapping target. |
| These files are the ones found in the /sys/block/xxx/queue/ directory. |
| |
| Files denoted with a RO postfix are readonly and the RW postfix means |
| read-write. |
| |
| add_random (RW) |
| ---------------- |
| This file allows to turn off the disk entropy contribution. Default |
| value of this file is '1'(on). |
| |
| discard_granularity (RO) |
| ----------------------- |
| This shows the size of internal allocation of the device in bytes, if |
| reported by the device. A value of '0' means device does not support |
| the discard functionality. |
| |
| discard_max_bytes (RO) |
| ---------------------- |
| Devices that support discard functionality may have internal limits on |
| the number of bytes that can be trimmed or unmapped in a single operation. |
| The discard_max_bytes parameter is set by the device driver to the maximum |
| number of bytes that can be discarded in a single operation. Discard |
| requests issued to the device must not exceed this limit. A discard_max_bytes |
| value of 0 means that the device does not support discard functionality. |
| |
| discard_zeroes_data (RO) |
| ------------------------ |
| When read, this file will show if the discarded block are zeroed by the |
| device or not. If its value is '1' the blocks are zeroed otherwise not. |
| |
| hw_sector_size (RO) |
| ------------------- |
| This is the hardware sector size of the device, in bytes. |
| |
| iostats (RW) |
| ------------- |
| This file is used to control (on/off) the iostats accounting of the |
| disk. |
| |
| logical_block_size (RO) |
| ----------------------- |
| This is the logcal block size of the device, in bytes. |
| |
| max_hw_sectors_kb (RO) |
| ---------------------- |
| This is the maximum number of kilobytes supported in a single data transfer. |
| |
| max_integrity_segments (RO) |
| --------------------------- |
| When read, this file shows the max limit of integrity segments as |
| set by block layer which a hardware controller can handle. |
| |
| max_sectors_kb (RW) |
| ------------------- |
| This is the maximum number of kilobytes that the block layer will allow |
| for a filesystem request. Must be smaller than or equal to the maximum |
| size allowed by the hardware. |
| |
| max_segments (RO) |
| ----------------- |
| Maximum number of segments of the device. |
| |
| max_segment_size (RO) |
| --------------------- |
| Maximum segment size of the device. |
| |
| minimum_io_size (RO) |
| -------------------- |
| This is the smallest preferred IO size reported by the device. |
| |
| nomerges (RW) |
| ------------- |
| This enables the user to disable the lookup logic involved with IO |
| merging requests in the block layer. By default (0) all merges are |
| enabled. When set to 1 only simple one-hit merges will be tried. When |
| set to 2 no merge algorithms will be tried (including one-hit or more |
| complex tree/hash lookups). |
| |
| nr_requests (RW) |
| ---------------- |
| This controls how many requests may be allocated in the block layer for |
| read or write requests. Note that the total allocated number may be twice |
| this amount, since it applies only to reads or writes (not the accumulated |
| sum). |
| |
| To avoid priority inversion through request starvation, a request |
| queue maintains a separate request pool per each cgroup when |
| CONFIG_BLK_CGROUP is enabled, and this parameter applies to each such |
| per-block-cgroup request pool. IOW, if there are N block cgroups, |
| each request queue may have up to N request pools, each independently |
| regulated by nr_requests. |
| |
| optimal_io_size (RO) |
| -------------------- |
| This is the optimal IO size reported by the device. |
| |
| physical_block_size (RO) |
| ------------------------ |
| This is the physical block size of device, in bytes. |
| |
| read_ahead_kb (RW) |
| ------------------ |
| Maximum number of kilobytes to read-ahead for filesystems on this block |
| device. |
| |
| rotational (RW) |
| --------------- |
| This file is used to stat if the device is of rotational type or |
| non-rotational type. |
| |
| rq_affinity (RW) |
| ---------------- |
| If this option is '1', the block layer will migrate request completions to the |
| cpu "group" that originally submitted the request. For some workloads this |
| provides a significant reduction in CPU cycles due to caching effects. |
| |
| For storage configurations that need to maximize distribution of completion |
| processing setting this option to '2' forces the completion to run on the |
| requesting cpu (bypassing the "group" aggregation logic). |
| |
| scheduler (RW) |
| -------------- |
| When read, this file will display the current and available IO schedulers |
| for this block device. The currently active IO scheduler will be enclosed |
| in [] brackets. Writing an IO scheduler name to this file will switch |
| control of this block device to that new IO scheduler. Note that writing |
| an IO scheduler name to this file will attempt to load that IO scheduler |
| module, if it isn't already present in the system. |
| |
| |
| |
| Jens Axboe <jens.axboe@oracle.com>, February 2009 |