| /* |
| * Copyright (C) ST-Ericsson SA 2010 |
| * |
| * License Terms: GNU General Public License, version 2 |
| * Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/interrupt.h> |
| #include <linux/irq.h> |
| #include <linux/slab.h> |
| #include <linux/i2c.h> |
| #include <linux/mfd/core.h> |
| #include <linux/mfd/stmpe.h> |
| #include "stmpe.h" |
| |
| static int __stmpe_enable(struct stmpe *stmpe, unsigned int blocks) |
| { |
| return stmpe->variant->enable(stmpe, blocks, true); |
| } |
| |
| static int __stmpe_disable(struct stmpe *stmpe, unsigned int blocks) |
| { |
| return stmpe->variant->enable(stmpe, blocks, false); |
| } |
| |
| static int __stmpe_reg_read(struct stmpe *stmpe, u8 reg) |
| { |
| int ret; |
| |
| ret = i2c_smbus_read_byte_data(stmpe->i2c, reg); |
| if (ret < 0) |
| dev_err(stmpe->dev, "failed to read reg %#x: %d\n", |
| reg, ret); |
| |
| dev_vdbg(stmpe->dev, "rd: reg %#x => data %#x\n", reg, ret); |
| |
| return ret; |
| } |
| |
| static int __stmpe_reg_write(struct stmpe *stmpe, u8 reg, u8 val) |
| { |
| int ret; |
| |
| dev_vdbg(stmpe->dev, "wr: reg %#x <= %#x\n", reg, val); |
| |
| ret = i2c_smbus_write_byte_data(stmpe->i2c, reg, val); |
| if (ret < 0) |
| dev_err(stmpe->dev, "failed to write reg %#x: %d\n", |
| reg, ret); |
| |
| return ret; |
| } |
| |
| static int __stmpe_set_bits(struct stmpe *stmpe, u8 reg, u8 mask, u8 val) |
| { |
| int ret; |
| |
| ret = __stmpe_reg_read(stmpe, reg); |
| if (ret < 0) |
| return ret; |
| |
| ret &= ~mask; |
| ret |= val; |
| |
| return __stmpe_reg_write(stmpe, reg, ret); |
| } |
| |
| static int __stmpe_block_read(struct stmpe *stmpe, u8 reg, u8 length, |
| u8 *values) |
| { |
| int ret; |
| |
| ret = i2c_smbus_read_i2c_block_data(stmpe->i2c, reg, length, values); |
| if (ret < 0) |
| dev_err(stmpe->dev, "failed to read regs %#x: %d\n", |
| reg, ret); |
| |
| dev_vdbg(stmpe->dev, "rd: reg %#x (%d) => ret %#x\n", reg, length, ret); |
| stmpe_dump_bytes("stmpe rd: ", values, length); |
| |
| return ret; |
| } |
| |
| static int __stmpe_block_write(struct stmpe *stmpe, u8 reg, u8 length, |
| const u8 *values) |
| { |
| int ret; |
| |
| dev_vdbg(stmpe->dev, "wr: regs %#x (%d)\n", reg, length); |
| stmpe_dump_bytes("stmpe wr: ", values, length); |
| |
| ret = i2c_smbus_write_i2c_block_data(stmpe->i2c, reg, length, |
| values); |
| if (ret < 0) |
| dev_err(stmpe->dev, "failed to write regs %#x: %d\n", |
| reg, ret); |
| |
| return ret; |
| } |
| |
| /** |
| * stmpe_enable - enable blocks on an STMPE device |
| * @stmpe: Device to work on |
| * @blocks: Mask of blocks (enum stmpe_block values) to enable |
| */ |
| int stmpe_enable(struct stmpe *stmpe, unsigned int blocks) |
| { |
| int ret; |
| |
| mutex_lock(&stmpe->lock); |
| ret = __stmpe_enable(stmpe, blocks); |
| mutex_unlock(&stmpe->lock); |
| |
| return ret; |
| } |
| EXPORT_SYMBOL_GPL(stmpe_enable); |
| |
| /** |
| * stmpe_disable - disable blocks on an STMPE device |
| * @stmpe: Device to work on |
| * @blocks: Mask of blocks (enum stmpe_block values) to enable |
| */ |
| int stmpe_disable(struct stmpe *stmpe, unsigned int blocks) |
| { |
| int ret; |
| |
| mutex_lock(&stmpe->lock); |
| ret = __stmpe_disable(stmpe, blocks); |
| mutex_unlock(&stmpe->lock); |
| |
| return ret; |
| } |
| EXPORT_SYMBOL_GPL(stmpe_disable); |
| |
| /** |
| * stmpe_reg_read() - read a single STMPE register |
| * @stmpe: Device to read from |
| * @reg: Register to read |
| */ |
| int stmpe_reg_read(struct stmpe *stmpe, u8 reg) |
| { |
| int ret; |
| |
| mutex_lock(&stmpe->lock); |
| ret = __stmpe_reg_read(stmpe, reg); |
| mutex_unlock(&stmpe->lock); |
| |
| return ret; |
| } |
| EXPORT_SYMBOL_GPL(stmpe_reg_read); |
| |
| /** |
| * stmpe_reg_write() - write a single STMPE register |
| * @stmpe: Device to write to |
| * @reg: Register to write |
| * @val: Value to write |
| */ |
| int stmpe_reg_write(struct stmpe *stmpe, u8 reg, u8 val) |
| { |
| int ret; |
| |
| mutex_lock(&stmpe->lock); |
| ret = __stmpe_reg_write(stmpe, reg, val); |
| mutex_unlock(&stmpe->lock); |
| |
| return ret; |
| } |
| EXPORT_SYMBOL_GPL(stmpe_reg_write); |
| |
| /** |
| * stmpe_set_bits() - set the value of a bitfield in a STMPE register |
| * @stmpe: Device to write to |
| * @reg: Register to write |
| * @mask: Mask of bits to set |
| * @val: Value to set |
| */ |
| int stmpe_set_bits(struct stmpe *stmpe, u8 reg, u8 mask, u8 val) |
| { |
| int ret; |
| |
| mutex_lock(&stmpe->lock); |
| ret = __stmpe_set_bits(stmpe, reg, mask, val); |
| mutex_unlock(&stmpe->lock); |
| |
| return ret; |
| } |
| EXPORT_SYMBOL_GPL(stmpe_set_bits); |
| |
| /** |
| * stmpe_block_read() - read multiple STMPE registers |
| * @stmpe: Device to read from |
| * @reg: First register |
| * @length: Number of registers |
| * @values: Buffer to write to |
| */ |
| int stmpe_block_read(struct stmpe *stmpe, u8 reg, u8 length, u8 *values) |
| { |
| int ret; |
| |
| mutex_lock(&stmpe->lock); |
| ret = __stmpe_block_read(stmpe, reg, length, values); |
| mutex_unlock(&stmpe->lock); |
| |
| return ret; |
| } |
| EXPORT_SYMBOL_GPL(stmpe_block_read); |
| |
| /** |
| * stmpe_block_write() - write multiple STMPE registers |
| * @stmpe: Device to write to |
| * @reg: First register |
| * @length: Number of registers |
| * @values: Values to write |
| */ |
| int stmpe_block_write(struct stmpe *stmpe, u8 reg, u8 length, |
| const u8 *values) |
| { |
| int ret; |
| |
| mutex_lock(&stmpe->lock); |
| ret = __stmpe_block_write(stmpe, reg, length, values); |
| mutex_unlock(&stmpe->lock); |
| |
| return ret; |
| } |
| EXPORT_SYMBOL_GPL(stmpe_block_write); |
| |
| /** |
| * stmpe_set_altfunc: set the alternate function for STMPE pins |
| * @stmpe: Device to configure |
| * @pins: Bitmask of pins to affect |
| * @block: block to enable alternate functions for |
| * |
| * @pins is assumed to have a bit set for each of the bits whose alternate |
| * function is to be changed, numbered according to the GPIOXY numbers. |
| * |
| * If the GPIO module is not enabled, this function automatically enables it in |
| * order to perform the change. |
| */ |
| int stmpe_set_altfunc(struct stmpe *stmpe, u32 pins, enum stmpe_block block) |
| { |
| struct stmpe_variant_info *variant = stmpe->variant; |
| u8 regaddr = stmpe->regs[STMPE_IDX_GPAFR_U_MSB]; |
| int af_bits = variant->af_bits; |
| int numregs = DIV_ROUND_UP(stmpe->num_gpios * af_bits, 8); |
| int afperreg = 8 / af_bits; |
| int mask = (1 << af_bits) - 1; |
| u8 regs[numregs]; |
| int af; |
| int ret; |
| |
| mutex_lock(&stmpe->lock); |
| |
| ret = __stmpe_enable(stmpe, STMPE_BLOCK_GPIO); |
| if (ret < 0) |
| goto out; |
| |
| ret = __stmpe_block_read(stmpe, regaddr, numregs, regs); |
| if (ret < 0) |
| goto out; |
| |
| af = variant->get_altfunc(stmpe, block); |
| |
| while (pins) { |
| int pin = __ffs(pins); |
| int regoffset = numregs - (pin / afperreg) - 1; |
| int pos = (pin % afperreg) * (8 / afperreg); |
| |
| regs[regoffset] &= ~(mask << pos); |
| regs[regoffset] |= af << pos; |
| |
| pins &= ~(1 << pin); |
| } |
| |
| ret = __stmpe_block_write(stmpe, regaddr, numregs, regs); |
| |
| out: |
| mutex_unlock(&stmpe->lock); |
| return ret; |
| } |
| EXPORT_SYMBOL_GPL(stmpe_set_altfunc); |
| |
| /* |
| * GPIO (all variants) |
| */ |
| |
| static struct resource stmpe_gpio_resources[] = { |
| /* Start and end filled dynamically */ |
| { |
| .flags = IORESOURCE_IRQ, |
| }, |
| }; |
| |
| static struct mfd_cell stmpe_gpio_cell = { |
| .name = "stmpe-gpio", |
| .resources = stmpe_gpio_resources, |
| .num_resources = ARRAY_SIZE(stmpe_gpio_resources), |
| }; |
| |
| /* |
| * Keypad (1601, 2401, 2403) |
| */ |
| |
| static struct resource stmpe_keypad_resources[] = { |
| { |
| .name = "KEYPAD", |
| .start = 0, |
| .end = 0, |
| .flags = IORESOURCE_IRQ, |
| }, |
| { |
| .name = "KEYPAD_OVER", |
| .start = 1, |
| .end = 1, |
| .flags = IORESOURCE_IRQ, |
| }, |
| }; |
| |
| static struct mfd_cell stmpe_keypad_cell = { |
| .name = "stmpe-keypad", |
| .resources = stmpe_keypad_resources, |
| .num_resources = ARRAY_SIZE(stmpe_keypad_resources), |
| }; |
| |
| /* |
| * Touchscreen (STMPE811) |
| */ |
| |
| static struct resource stmpe_ts_resources[] = { |
| { |
| .name = "TOUCH_DET", |
| .start = 0, |
| .end = 0, |
| .flags = IORESOURCE_IRQ, |
| }, |
| { |
| .name = "FIFO_TH", |
| .start = 1, |
| .end = 1, |
| .flags = IORESOURCE_IRQ, |
| }, |
| }; |
| |
| static struct mfd_cell stmpe_ts_cell = { |
| .name = "stmpe-ts", |
| .resources = stmpe_ts_resources, |
| .num_resources = ARRAY_SIZE(stmpe_ts_resources), |
| }; |
| |
| /* |
| * STMPE811 |
| */ |
| |
| static const u8 stmpe811_regs[] = { |
| [STMPE_IDX_CHIP_ID] = STMPE811_REG_CHIP_ID, |
| [STMPE_IDX_ICR_LSB] = STMPE811_REG_INT_CTRL, |
| [STMPE_IDX_IER_LSB] = STMPE811_REG_INT_EN, |
| [STMPE_IDX_ISR_MSB] = STMPE811_REG_INT_STA, |
| [STMPE_IDX_GPMR_LSB] = STMPE811_REG_GPIO_MP_STA, |
| [STMPE_IDX_GPSR_LSB] = STMPE811_REG_GPIO_SET_PIN, |
| [STMPE_IDX_GPCR_LSB] = STMPE811_REG_GPIO_CLR_PIN, |
| [STMPE_IDX_GPDR_LSB] = STMPE811_REG_GPIO_DIR, |
| [STMPE_IDX_GPRER_LSB] = STMPE811_REG_GPIO_RE, |
| [STMPE_IDX_GPFER_LSB] = STMPE811_REG_GPIO_FE, |
| [STMPE_IDX_GPAFR_U_MSB] = STMPE811_REG_GPIO_AF, |
| [STMPE_IDX_IEGPIOR_LSB] = STMPE811_REG_GPIO_INT_EN, |
| [STMPE_IDX_ISGPIOR_MSB] = STMPE811_REG_GPIO_INT_STA, |
| [STMPE_IDX_GPEDR_MSB] = STMPE811_REG_GPIO_ED, |
| }; |
| |
| static struct stmpe_variant_block stmpe811_blocks[] = { |
| { |
| .cell = &stmpe_gpio_cell, |
| .irq = STMPE811_IRQ_GPIOC, |
| .block = STMPE_BLOCK_GPIO, |
| }, |
| { |
| .cell = &stmpe_ts_cell, |
| .irq = STMPE811_IRQ_TOUCH_DET, |
| .block = STMPE_BLOCK_TOUCHSCREEN, |
| }, |
| }; |
| |
| static int stmpe811_enable(struct stmpe *stmpe, unsigned int blocks, |
| bool enable) |
| { |
| unsigned int mask = 0; |
| |
| if (blocks & STMPE_BLOCK_GPIO) |
| mask |= STMPE811_SYS_CTRL2_GPIO_OFF; |
| |
| if (blocks & STMPE_BLOCK_ADC) |
| mask |= STMPE811_SYS_CTRL2_ADC_OFF; |
| |
| if (blocks & STMPE_BLOCK_TOUCHSCREEN) |
| mask |= STMPE811_SYS_CTRL2_TSC_OFF; |
| |
| return __stmpe_set_bits(stmpe, STMPE811_REG_SYS_CTRL2, mask, |
| enable ? 0 : mask); |
| } |
| |
| static int stmpe811_get_altfunc(struct stmpe *stmpe, enum stmpe_block block) |
| { |
| /* 0 for touchscreen, 1 for GPIO */ |
| return block != STMPE_BLOCK_TOUCHSCREEN; |
| } |
| |
| static struct stmpe_variant_info stmpe811 = { |
| .name = "stmpe811", |
| .id_val = 0x0811, |
| .id_mask = 0xffff, |
| .num_gpios = 8, |
| .af_bits = 1, |
| .regs = stmpe811_regs, |
| .blocks = stmpe811_blocks, |
| .num_blocks = ARRAY_SIZE(stmpe811_blocks), |
| .num_irqs = STMPE811_NR_INTERNAL_IRQS, |
| .enable = stmpe811_enable, |
| .get_altfunc = stmpe811_get_altfunc, |
| }; |
| |
| /* |
| * STMPE1601 |
| */ |
| |
| static const u8 stmpe1601_regs[] = { |
| [STMPE_IDX_CHIP_ID] = STMPE1601_REG_CHIP_ID, |
| [STMPE_IDX_ICR_LSB] = STMPE1601_REG_ICR_LSB, |
| [STMPE_IDX_IER_LSB] = STMPE1601_REG_IER_LSB, |
| [STMPE_IDX_ISR_MSB] = STMPE1601_REG_ISR_MSB, |
| [STMPE_IDX_GPMR_LSB] = STMPE1601_REG_GPIO_MP_LSB, |
| [STMPE_IDX_GPSR_LSB] = STMPE1601_REG_GPIO_SET_LSB, |
| [STMPE_IDX_GPCR_LSB] = STMPE1601_REG_GPIO_CLR_LSB, |
| [STMPE_IDX_GPDR_LSB] = STMPE1601_REG_GPIO_SET_DIR_LSB, |
| [STMPE_IDX_GPRER_LSB] = STMPE1601_REG_GPIO_RE_LSB, |
| [STMPE_IDX_GPFER_LSB] = STMPE1601_REG_GPIO_FE_LSB, |
| [STMPE_IDX_GPAFR_U_MSB] = STMPE1601_REG_GPIO_AF_U_MSB, |
| [STMPE_IDX_IEGPIOR_LSB] = STMPE1601_REG_INT_EN_GPIO_MASK_LSB, |
| [STMPE_IDX_ISGPIOR_MSB] = STMPE1601_REG_INT_STA_GPIO_MSB, |
| [STMPE_IDX_GPEDR_MSB] = STMPE1601_REG_GPIO_ED_MSB, |
| }; |
| |
| static struct stmpe_variant_block stmpe1601_blocks[] = { |
| { |
| .cell = &stmpe_gpio_cell, |
| .irq = STMPE24XX_IRQ_GPIOC, |
| .block = STMPE_BLOCK_GPIO, |
| }, |
| { |
| .cell = &stmpe_keypad_cell, |
| .irq = STMPE24XX_IRQ_KEYPAD, |
| .block = STMPE_BLOCK_KEYPAD, |
| }, |
| }; |
| |
| /* supported autosleep timeout delay (in msecs) */ |
| static const int stmpe_autosleep_delay[] = { |
| 4, 16, 32, 64, 128, 256, 512, 1024, |
| }; |
| |
| static int stmpe_round_timeout(int timeout) |
| { |
| int i; |
| |
| for (i = 0; i < ARRAY_SIZE(stmpe_autosleep_delay); i++) { |
| if (stmpe_autosleep_delay[i] >= timeout) |
| return i; |
| } |
| |
| /* |
| * requests for delays longer than supported should not return the |
| * longest supported delay |
| */ |
| return -EINVAL; |
| } |
| |
| static int stmpe_autosleep(struct stmpe *stmpe, int autosleep_timeout) |
| { |
| int ret; |
| |
| if (!stmpe->variant->enable_autosleep) |
| return -ENOSYS; |
| |
| mutex_lock(&stmpe->lock); |
| ret = stmpe->variant->enable_autosleep(stmpe, autosleep_timeout); |
| mutex_unlock(&stmpe->lock); |
| |
| return ret; |
| } |
| |
| /* |
| * Both stmpe 1601/2403 support same layout for autosleep |
| */ |
| static int stmpe1601_autosleep(struct stmpe *stmpe, |
| int autosleep_timeout) |
| { |
| int ret, timeout; |
| |
| /* choose the best available timeout */ |
| timeout = stmpe_round_timeout(autosleep_timeout); |
| if (timeout < 0) { |
| dev_err(stmpe->dev, "invalid timeout\n"); |
| return timeout; |
| } |
| |
| ret = __stmpe_set_bits(stmpe, STMPE1601_REG_SYS_CTRL2, |
| STMPE1601_AUTOSLEEP_TIMEOUT_MASK, |
| timeout); |
| if (ret < 0) |
| return ret; |
| |
| return __stmpe_set_bits(stmpe, STMPE1601_REG_SYS_CTRL2, |
| STPME1601_AUTOSLEEP_ENABLE, |
| STPME1601_AUTOSLEEP_ENABLE); |
| } |
| |
| static int stmpe1601_enable(struct stmpe *stmpe, unsigned int blocks, |
| bool enable) |
| { |
| unsigned int mask = 0; |
| |
| if (blocks & STMPE_BLOCK_GPIO) |
| mask |= STMPE1601_SYS_CTRL_ENABLE_GPIO; |
| |
| if (blocks & STMPE_BLOCK_KEYPAD) |
| mask |= STMPE1601_SYS_CTRL_ENABLE_KPC; |
| |
| return __stmpe_set_bits(stmpe, STMPE1601_REG_SYS_CTRL, mask, |
| enable ? mask : 0); |
| } |
| |
| static int stmpe1601_get_altfunc(struct stmpe *stmpe, enum stmpe_block block) |
| { |
| switch (block) { |
| case STMPE_BLOCK_PWM: |
| return 2; |
| |
| case STMPE_BLOCK_KEYPAD: |
| return 1; |
| |
| case STMPE_BLOCK_GPIO: |
| default: |
| return 0; |
| } |
| } |
| |
| static struct stmpe_variant_info stmpe1601 = { |
| .name = "stmpe1601", |
| .id_val = 0x0210, |
| .id_mask = 0xfff0, /* at least 0x0210 and 0x0212 */ |
| .num_gpios = 16, |
| .af_bits = 2, |
| .regs = stmpe1601_regs, |
| .blocks = stmpe1601_blocks, |
| .num_blocks = ARRAY_SIZE(stmpe1601_blocks), |
| .num_irqs = STMPE1601_NR_INTERNAL_IRQS, |
| .enable = stmpe1601_enable, |
| .get_altfunc = stmpe1601_get_altfunc, |
| .enable_autosleep = stmpe1601_autosleep, |
| }; |
| |
| /* |
| * STMPE24XX |
| */ |
| |
| static const u8 stmpe24xx_regs[] = { |
| [STMPE_IDX_CHIP_ID] = STMPE24XX_REG_CHIP_ID, |
| [STMPE_IDX_ICR_LSB] = STMPE24XX_REG_ICR_LSB, |
| [STMPE_IDX_IER_LSB] = STMPE24XX_REG_IER_LSB, |
| [STMPE_IDX_ISR_MSB] = STMPE24XX_REG_ISR_MSB, |
| [STMPE_IDX_GPMR_LSB] = STMPE24XX_REG_GPMR_LSB, |
| [STMPE_IDX_GPSR_LSB] = STMPE24XX_REG_GPSR_LSB, |
| [STMPE_IDX_GPCR_LSB] = STMPE24XX_REG_GPCR_LSB, |
| [STMPE_IDX_GPDR_LSB] = STMPE24XX_REG_GPDR_LSB, |
| [STMPE_IDX_GPRER_LSB] = STMPE24XX_REG_GPRER_LSB, |
| [STMPE_IDX_GPFER_LSB] = STMPE24XX_REG_GPFER_LSB, |
| [STMPE_IDX_GPAFR_U_MSB] = STMPE24XX_REG_GPAFR_U_MSB, |
| [STMPE_IDX_IEGPIOR_LSB] = STMPE24XX_REG_IEGPIOR_LSB, |
| [STMPE_IDX_ISGPIOR_MSB] = STMPE24XX_REG_ISGPIOR_MSB, |
| [STMPE_IDX_GPEDR_MSB] = STMPE24XX_REG_GPEDR_MSB, |
| }; |
| |
| static struct stmpe_variant_block stmpe24xx_blocks[] = { |
| { |
| .cell = &stmpe_gpio_cell, |
| .irq = STMPE24XX_IRQ_GPIOC, |
| .block = STMPE_BLOCK_GPIO, |
| }, |
| { |
| .cell = &stmpe_keypad_cell, |
| .irq = STMPE24XX_IRQ_KEYPAD, |
| .block = STMPE_BLOCK_KEYPAD, |
| }, |
| }; |
| |
| static int stmpe24xx_enable(struct stmpe *stmpe, unsigned int blocks, |
| bool enable) |
| { |
| unsigned int mask = 0; |
| |
| if (blocks & STMPE_BLOCK_GPIO) |
| mask |= STMPE24XX_SYS_CTRL_ENABLE_GPIO; |
| |
| if (blocks & STMPE_BLOCK_KEYPAD) |
| mask |= STMPE24XX_SYS_CTRL_ENABLE_KPC; |
| |
| return __stmpe_set_bits(stmpe, STMPE24XX_REG_SYS_CTRL, mask, |
| enable ? mask : 0); |
| } |
| |
| static int stmpe24xx_get_altfunc(struct stmpe *stmpe, enum stmpe_block block) |
| { |
| switch (block) { |
| case STMPE_BLOCK_ROTATOR: |
| return 2; |
| |
| case STMPE_BLOCK_KEYPAD: |
| return 1; |
| |
| case STMPE_BLOCK_GPIO: |
| default: |
| return 0; |
| } |
| } |
| |
| static struct stmpe_variant_info stmpe2401 = { |
| .name = "stmpe2401", |
| .id_val = 0x0101, |
| .id_mask = 0xffff, |
| .num_gpios = 24, |
| .af_bits = 2, |
| .regs = stmpe24xx_regs, |
| .blocks = stmpe24xx_blocks, |
| .num_blocks = ARRAY_SIZE(stmpe24xx_blocks), |
| .num_irqs = STMPE24XX_NR_INTERNAL_IRQS, |
| .enable = stmpe24xx_enable, |
| .get_altfunc = stmpe24xx_get_altfunc, |
| }; |
| |
| static struct stmpe_variant_info stmpe2403 = { |
| .name = "stmpe2403", |
| .id_val = 0x0120, |
| .id_mask = 0xffff, |
| .num_gpios = 24, |
| .af_bits = 2, |
| .regs = stmpe24xx_regs, |
| .blocks = stmpe24xx_blocks, |
| .num_blocks = ARRAY_SIZE(stmpe24xx_blocks), |
| .num_irqs = STMPE24XX_NR_INTERNAL_IRQS, |
| .enable = stmpe24xx_enable, |
| .get_altfunc = stmpe24xx_get_altfunc, |
| .enable_autosleep = stmpe1601_autosleep, /* same as stmpe1601 */ |
| }; |
| |
| static struct stmpe_variant_info *stmpe_variant_info[] = { |
| [STMPE811] = &stmpe811, |
| [STMPE1601] = &stmpe1601, |
| [STMPE2401] = &stmpe2401, |
| [STMPE2403] = &stmpe2403, |
| }; |
| |
| static irqreturn_t stmpe_irq(int irq, void *data) |
| { |
| struct stmpe *stmpe = data; |
| struct stmpe_variant_info *variant = stmpe->variant; |
| int num = DIV_ROUND_UP(variant->num_irqs, 8); |
| u8 israddr = stmpe->regs[STMPE_IDX_ISR_MSB]; |
| u8 isr[num]; |
| int ret; |
| int i; |
| |
| ret = stmpe_block_read(stmpe, israddr, num, isr); |
| if (ret < 0) |
| return IRQ_NONE; |
| |
| for (i = 0; i < num; i++) { |
| int bank = num - i - 1; |
| u8 status = isr[i]; |
| u8 clear; |
| |
| status &= stmpe->ier[bank]; |
| if (!status) |
| continue; |
| |
| clear = status; |
| while (status) { |
| int bit = __ffs(status); |
| int line = bank * 8 + bit; |
| |
| handle_nested_irq(stmpe->irq_base + line); |
| status &= ~(1 << bit); |
| } |
| |
| stmpe_reg_write(stmpe, israddr + i, clear); |
| } |
| |
| return IRQ_HANDLED; |
| } |
| |
| static void stmpe_irq_lock(unsigned int irq) |
| { |
| struct stmpe *stmpe = get_irq_chip_data(irq); |
| |
| mutex_lock(&stmpe->irq_lock); |
| } |
| |
| static void stmpe_irq_sync_unlock(unsigned int irq) |
| { |
| struct stmpe *stmpe = get_irq_chip_data(irq); |
| struct stmpe_variant_info *variant = stmpe->variant; |
| int num = DIV_ROUND_UP(variant->num_irqs, 8); |
| int i; |
| |
| for (i = 0; i < num; i++) { |
| u8 new = stmpe->ier[i]; |
| u8 old = stmpe->oldier[i]; |
| |
| if (new == old) |
| continue; |
| |
| stmpe->oldier[i] = new; |
| stmpe_reg_write(stmpe, stmpe->regs[STMPE_IDX_IER_LSB] - i, new); |
| } |
| |
| mutex_unlock(&stmpe->irq_lock); |
| } |
| |
| static void stmpe_irq_mask(unsigned int irq) |
| { |
| struct stmpe *stmpe = get_irq_chip_data(irq); |
| int offset = irq - stmpe->irq_base; |
| int regoffset = offset / 8; |
| int mask = 1 << (offset % 8); |
| |
| stmpe->ier[regoffset] &= ~mask; |
| } |
| |
| static void stmpe_irq_unmask(unsigned int irq) |
| { |
| struct stmpe *stmpe = get_irq_chip_data(irq); |
| int offset = irq - stmpe->irq_base; |
| int regoffset = offset / 8; |
| int mask = 1 << (offset % 8); |
| |
| stmpe->ier[regoffset] |= mask; |
| } |
| |
| static struct irq_chip stmpe_irq_chip = { |
| .name = "stmpe", |
| .bus_lock = stmpe_irq_lock, |
| .bus_sync_unlock = stmpe_irq_sync_unlock, |
| .mask = stmpe_irq_mask, |
| .unmask = stmpe_irq_unmask, |
| }; |
| |
| static int __devinit stmpe_irq_init(struct stmpe *stmpe) |
| { |
| int num_irqs = stmpe->variant->num_irqs; |
| int base = stmpe->irq_base; |
| int irq; |
| |
| for (irq = base; irq < base + num_irqs; irq++) { |
| set_irq_chip_data(irq, stmpe); |
| set_irq_chip_and_handler(irq, &stmpe_irq_chip, |
| handle_edge_irq); |
| set_irq_nested_thread(irq, 1); |
| #ifdef CONFIG_ARM |
| set_irq_flags(irq, IRQF_VALID); |
| #else |
| set_irq_noprobe(irq); |
| #endif |
| } |
| |
| return 0; |
| } |
| |
| static void stmpe_irq_remove(struct stmpe *stmpe) |
| { |
| int num_irqs = stmpe->variant->num_irqs; |
| int base = stmpe->irq_base; |
| int irq; |
| |
| for (irq = base; irq < base + num_irqs; irq++) { |
| #ifdef CONFIG_ARM |
| set_irq_flags(irq, 0); |
| #endif |
| set_irq_chip_and_handler(irq, NULL, NULL); |
| set_irq_chip_data(irq, NULL); |
| } |
| } |
| |
| static int __devinit stmpe_chip_init(struct stmpe *stmpe) |
| { |
| unsigned int irq_trigger = stmpe->pdata->irq_trigger; |
| int autosleep_timeout = stmpe->pdata->autosleep_timeout; |
| struct stmpe_variant_info *variant = stmpe->variant; |
| u8 icr = STMPE_ICR_LSB_GIM; |
| unsigned int id; |
| u8 data[2]; |
| int ret; |
| |
| ret = stmpe_block_read(stmpe, stmpe->regs[STMPE_IDX_CHIP_ID], |
| ARRAY_SIZE(data), data); |
| if (ret < 0) |
| return ret; |
| |
| id = (data[0] << 8) | data[1]; |
| if ((id & variant->id_mask) != variant->id_val) { |
| dev_err(stmpe->dev, "unknown chip id: %#x\n", id); |
| return -EINVAL; |
| } |
| |
| dev_info(stmpe->dev, "%s detected, chip id: %#x\n", variant->name, id); |
| |
| /* Disable all modules -- subdrivers should enable what they need. */ |
| ret = stmpe_disable(stmpe, ~0); |
| if (ret) |
| return ret; |
| |
| if (irq_trigger == IRQF_TRIGGER_FALLING || |
| irq_trigger == IRQF_TRIGGER_RISING) |
| icr |= STMPE_ICR_LSB_EDGE; |
| |
| if (irq_trigger == IRQF_TRIGGER_RISING || |
| irq_trigger == IRQF_TRIGGER_HIGH) |
| icr |= STMPE_ICR_LSB_HIGH; |
| |
| if (stmpe->pdata->irq_invert_polarity) |
| icr ^= STMPE_ICR_LSB_HIGH; |
| |
| if (stmpe->pdata->autosleep) { |
| ret = stmpe_autosleep(stmpe, autosleep_timeout); |
| if (ret) |
| return ret; |
| } |
| |
| return stmpe_reg_write(stmpe, stmpe->regs[STMPE_IDX_ICR_LSB], icr); |
| } |
| |
| static int __devinit stmpe_add_device(struct stmpe *stmpe, |
| struct mfd_cell *cell, int irq) |
| { |
| return mfd_add_devices(stmpe->dev, stmpe->pdata->id, cell, 1, |
| NULL, stmpe->irq_base + irq); |
| } |
| |
| static int __devinit stmpe_devices_init(struct stmpe *stmpe) |
| { |
| struct stmpe_variant_info *variant = stmpe->variant; |
| unsigned int platform_blocks = stmpe->pdata->blocks; |
| int ret = -EINVAL; |
| int i; |
| |
| for (i = 0; i < variant->num_blocks; i++) { |
| struct stmpe_variant_block *block = &variant->blocks[i]; |
| |
| if (!(platform_blocks & block->block)) |
| continue; |
| |
| platform_blocks &= ~block->block; |
| ret = stmpe_add_device(stmpe, block->cell, block->irq); |
| if (ret) |
| return ret; |
| } |
| |
| if (platform_blocks) |
| dev_warn(stmpe->dev, |
| "platform wants blocks (%#x) not present on variant", |
| platform_blocks); |
| |
| return ret; |
| } |
| |
| static int __devinit stmpe_probe(struct i2c_client *i2c, |
| const struct i2c_device_id *id) |
| { |
| struct stmpe_platform_data *pdata = i2c->dev.platform_data; |
| struct stmpe *stmpe; |
| int ret; |
| |
| if (!pdata) |
| return -EINVAL; |
| |
| stmpe = kzalloc(sizeof(struct stmpe), GFP_KERNEL); |
| if (!stmpe) |
| return -ENOMEM; |
| |
| mutex_init(&stmpe->irq_lock); |
| mutex_init(&stmpe->lock); |
| |
| stmpe->dev = &i2c->dev; |
| stmpe->i2c = i2c; |
| |
| stmpe->pdata = pdata; |
| stmpe->irq_base = pdata->irq_base; |
| |
| stmpe->partnum = id->driver_data; |
| stmpe->variant = stmpe_variant_info[stmpe->partnum]; |
| stmpe->regs = stmpe->variant->regs; |
| stmpe->num_gpios = stmpe->variant->num_gpios; |
| |
| i2c_set_clientdata(i2c, stmpe); |
| |
| ret = stmpe_chip_init(stmpe); |
| if (ret) |
| goto out_free; |
| |
| ret = stmpe_irq_init(stmpe); |
| if (ret) |
| goto out_free; |
| |
| ret = request_threaded_irq(stmpe->i2c->irq, NULL, stmpe_irq, |
| pdata->irq_trigger | IRQF_ONESHOT, |
| "stmpe", stmpe); |
| if (ret) { |
| dev_err(stmpe->dev, "failed to request IRQ: %d\n", ret); |
| goto out_removeirq; |
| } |
| |
| ret = stmpe_devices_init(stmpe); |
| if (ret) { |
| dev_err(stmpe->dev, "failed to add children\n"); |
| goto out_removedevs; |
| } |
| |
| return 0; |
| |
| out_removedevs: |
| mfd_remove_devices(stmpe->dev); |
| free_irq(stmpe->i2c->irq, stmpe); |
| out_removeirq: |
| stmpe_irq_remove(stmpe); |
| out_free: |
| kfree(stmpe); |
| return ret; |
| } |
| |
| static int __devexit stmpe_remove(struct i2c_client *client) |
| { |
| struct stmpe *stmpe = i2c_get_clientdata(client); |
| |
| mfd_remove_devices(stmpe->dev); |
| |
| free_irq(stmpe->i2c->irq, stmpe); |
| stmpe_irq_remove(stmpe); |
| |
| kfree(stmpe); |
| |
| return 0; |
| } |
| |
| static const struct i2c_device_id stmpe_id[] = { |
| { "stmpe811", STMPE811 }, |
| { "stmpe1601", STMPE1601 }, |
| { "stmpe2401", STMPE2401 }, |
| { "stmpe2403", STMPE2403 }, |
| { } |
| }; |
| MODULE_DEVICE_TABLE(i2c, stmpe_id); |
| |
| static struct i2c_driver stmpe_driver = { |
| .driver.name = "stmpe", |
| .driver.owner = THIS_MODULE, |
| .probe = stmpe_probe, |
| .remove = __devexit_p(stmpe_remove), |
| .id_table = stmpe_id, |
| }; |
| |
| static int __init stmpe_init(void) |
| { |
| return i2c_add_driver(&stmpe_driver); |
| } |
| subsys_initcall(stmpe_init); |
| |
| static void __exit stmpe_exit(void) |
| { |
| i2c_del_driver(&stmpe_driver); |
| } |
| module_exit(stmpe_exit); |
| |
| MODULE_LICENSE("GPL v2"); |
| MODULE_DESCRIPTION("STMPE MFD core driver"); |
| MODULE_AUTHOR("Rabin Vincent <rabin.vincent@stericsson.com>"); |