drivers/gpu/drm/drm_dp_helper.c - kernel/msm-4.9 - Gitiles

 /*
  * Copyright © 2009 Keith Packard
  *
  * Permission to use, copy, modify, distribute, and sell this software and its
  * documentation for any purpose is hereby granted without fee, provided that
  * the above copyright notice appear in all copies and that both that copyright
  * notice and this permission notice appear in supporting documentation, and
  * that the name of the copyright holders not be used in advertising or
  * publicity pertaining to distribution of the software without specific,
  * written prior permission.  The copyright holders make no representations
  * about the suitability of this software for any purpose.  It is provided "as
  * is" without express or implied warranty.
  *
  * THE COPYRIGHT HOLDERS DISCLAIM ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
  * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO
  * EVENT SHALL THE COPYRIGHT HOLDERS BE LIABLE FOR ANY SPECIAL, INDIRECT OR
  * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE,
  * DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER
  * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE
  * OF THIS SOFTWARE.
  */

 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/delay.h>
 #include <linux/init.h>
 #include <linux/errno.h>
 #include <linux/sched.h>
 #include <linux/i2c.h>
 #include <drm/drm_dp_helper.h>
 #include <drm/drmP.h>

 /**
  * DOC: dp helpers
  *
  * These functions contain some common logic and helpers at various abstraction
  * levels to deal with Display Port sink devices and related things like DP aux
  * channel transfers, EDID reading over DP aux channels, decoding certain DPCD
  * blocks, ...
  */

 /* Run a single AUX_CH I2C transaction, writing/reading data as necessary */
 static int
 i2c_algo_dp_aux_transaction(struct i2c_adapter *adapter, int mode,
 			    uint8_t write_byte, uint8_t *read_byte)
 {
 	struct i2c_algo_dp_aux_data *algo_data = adapter->algo_data;
 	int ret;

 	ret = (*algo_data->aux_ch)(adapter, mode,
 				   write_byte, read_byte);
 	return ret;
 }

 /*
  * I2C over AUX CH
  */

 /*
  * Send the address. If the I2C link is running, this 'restarts'
  * the connection with the new address, this is used for doing
  * a write followed by a read (as needed for DDC)
  */
 static int
 i2c_algo_dp_aux_address(struct i2c_adapter *adapter, u16 address, bool reading)
 {
 	struct i2c_algo_dp_aux_data *algo_data = adapter->algo_data;
 	int mode = MODE_I2C_START;
 	int ret;

 	if (reading)
 		mode |= MODE_I2C_READ;
 	else
 		mode |= MODE_I2C_WRITE;
 	algo_data->address = address;
 	algo_data->running = true;
 	ret = i2c_algo_dp_aux_transaction(adapter, mode, 0, NULL);
 	return ret;
 }

 /*
  * Stop the I2C transaction. This closes out the link, sending
  * a bare address packet with the MOT bit turned off
  */
 static void
 i2c_algo_dp_aux_stop(struct i2c_adapter *adapter, bool reading)
 {
 	struct i2c_algo_dp_aux_data *algo_data = adapter->algo_data;
 	int mode = MODE_I2C_STOP;

 	if (reading)
 		mode |= MODE_I2C_READ;
 	else
 		mode |= MODE_I2C_WRITE;
 	if (algo_data->running) {
 		(void) i2c_algo_dp_aux_transaction(adapter, mode, 0, NULL);
 		algo_data->running = false;
 	}
 }

 /*
  * Write a single byte to the current I2C address, the
  * the I2C link must be running or this returns -EIO
  */
 static int
 i2c_algo_dp_aux_put_byte(struct i2c_adapter *adapter, u8 byte)
 {
 	struct i2c_algo_dp_aux_data *algo_data = adapter->algo_data;
 	int ret;

 	if (!algo_data->running)
 		return -EIO;

 	ret = i2c_algo_dp_aux_transaction(adapter, MODE_I2C_WRITE, byte, NULL);
 	return ret;
 }

 /*
  * Read a single byte from the current I2C address, the
  * I2C link must be running or this returns -EIO
  */
 static int
 i2c_algo_dp_aux_get_byte(struct i2c_adapter *adapter, u8 *byte_ret)
 {
 	struct i2c_algo_dp_aux_data *algo_data = adapter->algo_data;
 	int ret;

 	if (!algo_data->running)
 		return -EIO;

 	ret = i2c_algo_dp_aux_transaction(adapter, MODE_I2C_READ, 0, byte_ret);
 	return ret;
 }

 static int
 i2c_algo_dp_aux_xfer(struct i2c_adapter *adapter,
 		     struct i2c_msg *msgs,
 		     int num)
 {
 	int ret = 0;
 	bool reading = false;
 	int m;
 	int b;

 	for (m = 0; m < num; m++) {
 		u16 len = msgs[m].len;
 		u8 *buf = msgs[m].buf;
 		reading = (msgs[m].flags & I2C_M_RD) != 0;
 		ret = i2c_algo_dp_aux_address(adapter, msgs[m].addr, reading);
 		if (ret < 0)
 			break;
 		if (reading) {
 			for (b = 0; b < len; b++) {
 				ret = i2c_algo_dp_aux_get_byte(adapter, &buf[b]);
 				if (ret < 0)
 					break;
 			}
 		} else {
 			for (b = 0; b < len; b++) {
 				ret = i2c_algo_dp_aux_put_byte(adapter, buf[b]);
 				if (ret < 0)
 					break;
 			}
 		}
 		if (ret < 0)
 			break;
 	}
 	if (ret >= 0)
 		ret = num;
 	i2c_algo_dp_aux_stop(adapter, reading);
 	DRM_DEBUG_KMS("dp_aux_xfer return %d\n", ret);
 	return ret;
 }

 static u32
 i2c_algo_dp_aux_functionality(struct i2c_adapter *adapter)
 {
 	return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL |
 	       I2C_FUNC_SMBUS_READ_BLOCK_DATA |
 	       I2C_FUNC_SMBUS_BLOCK_PROC_CALL |
 	       I2C_FUNC_10BIT_ADDR;
 }

 static const struct i2c_algorithm i2c_dp_aux_algo = {
 	.master_xfer	= i2c_algo_dp_aux_xfer,
 	.functionality	= i2c_algo_dp_aux_functionality,
 };

 static void
 i2c_dp_aux_reset_bus(struct i2c_adapter *adapter)
 {
 	(void) i2c_algo_dp_aux_address(adapter, 0, false);
 	(void) i2c_algo_dp_aux_stop(adapter, false);
 }

 static int
 i2c_dp_aux_prepare_bus(struct i2c_adapter *adapter)
 {
 	adapter->algo = &i2c_dp_aux_algo;
 	adapter->retries = 3;
 	i2c_dp_aux_reset_bus(adapter);
 	return 0;
 }

 /**
  * i2c_dp_aux_add_bus() - register an i2c adapter using the aux ch helper
  * @adapter: i2c adapter to register
  *
  * This registers an i2c adapater that uses dp aux channel as it's underlaying
  * transport. The driver needs to fill out the &i2c_algo_dp_aux_data structure
  * and store it in the algo_data member of the @adapter argument. This will be
  * used by the i2c over dp aux algorithm to drive the hardware.
  *
  * RETURNS:
  * 0 on success, -ERRNO on failure.
  */
 int
 i2c_dp_aux_add_bus(struct i2c_adapter *adapter)
 {
 	int error;

 	error = i2c_dp_aux_prepare_bus(adapter);
 	if (error)
 		return error;
 	error = i2c_add_adapter(adapter);
 	return error;
 }
 EXPORT_SYMBOL(i2c_dp_aux_add_bus);

 /* Helpers for DP link training */
 static u8 dp_link_status(u8 link_status[DP_LINK_STATUS_SIZE], int r)
 {
 	return link_status[r - DP_LANE0_1_STATUS];
 }

 static u8 dp_get_lane_status(u8 link_status[DP_LINK_STATUS_SIZE],
 			     int lane)
 {
 	int i = DP_LANE0_1_STATUS + (lane >> 1);
 	int s = (lane & 1) * 4;
 	u8 l = dp_link_status(link_status, i);
 	return (l >> s) & 0xf;
 }

 bool drm_dp_channel_eq_ok(u8 link_status[DP_LINK_STATUS_SIZE],
 			  int lane_count)
 {
 	u8 lane_align;
 	u8 lane_status;
 	int lane;

 	lane_align = dp_link_status(link_status,
 				    DP_LANE_ALIGN_STATUS_UPDATED);
 	if ((lane_align & DP_INTERLANE_ALIGN_DONE) == 0)
 		return false;
 	for (lane = 0; lane < lane_count; lane++) {
 		lane_status = dp_get_lane_status(link_status, lane);
 		if ((lane_status & DP_CHANNEL_EQ_BITS) != DP_CHANNEL_EQ_BITS)
 			return false;
 	}
 	return true;
 }
 EXPORT_SYMBOL(drm_dp_channel_eq_ok);

 bool drm_dp_clock_recovery_ok(u8 link_status[DP_LINK_STATUS_SIZE],
 			      int lane_count)
 {
 	int lane;
 	u8 lane_status;

 	for (lane = 0; lane < lane_count; lane++) {
 		lane_status = dp_get_lane_status(link_status, lane);
 		if ((lane_status & DP_LANE_CR_DONE) == 0)
 			return false;
 	}
 	return true;
 }
 EXPORT_SYMBOL(drm_dp_clock_recovery_ok);

 u8 drm_dp_get_adjust_request_voltage(u8 link_status[DP_LINK_STATUS_SIZE],
 				     int lane)
 {
 	int i = DP_ADJUST_REQUEST_LANE0_1 + (lane >> 1);
 	int s = ((lane & 1) ?
 		 DP_ADJUST_VOLTAGE_SWING_LANE1_SHIFT :
 		 DP_ADJUST_VOLTAGE_SWING_LANE0_SHIFT);
 	u8 l = dp_link_status(link_status, i);

 	return ((l >> s) & 0x3) << DP_TRAIN_VOLTAGE_SWING_SHIFT;
 }
 EXPORT_SYMBOL(drm_dp_get_adjust_request_voltage);

 u8 drm_dp_get_adjust_request_pre_emphasis(u8 link_status[DP_LINK_STATUS_SIZE],
 					  int lane)
 {
 	int i = DP_ADJUST_REQUEST_LANE0_1 + (lane >> 1);
 	int s = ((lane & 1) ?
 		 DP_ADJUST_PRE_EMPHASIS_LANE1_SHIFT :
 		 DP_ADJUST_PRE_EMPHASIS_LANE0_SHIFT);
 	u8 l = dp_link_status(link_status, i);

 	return ((l >> s) & 0x3) << DP_TRAIN_PRE_EMPHASIS_SHIFT;
 }
 EXPORT_SYMBOL(drm_dp_get_adjust_request_pre_emphasis);

 void drm_dp_link_train_clock_recovery_delay(u8 dpcd[DP_RECEIVER_CAP_SIZE]) {
 	if (dpcd[DP_TRAINING_AUX_RD_INTERVAL] == 0)
 		udelay(100);
 	else
 		mdelay(dpcd[DP_TRAINING_AUX_RD_INTERVAL] * 4);
 }
 EXPORT_SYMBOL(drm_dp_link_train_clock_recovery_delay);

 void drm_dp_link_train_channel_eq_delay(u8 dpcd[DP_RECEIVER_CAP_SIZE]) {
 	if (dpcd[DP_TRAINING_AUX_RD_INTERVAL] == 0)
 		udelay(400);
 	else
 		mdelay(dpcd[DP_TRAINING_AUX_RD_INTERVAL] * 4);
 }
 EXPORT_SYMBOL(drm_dp_link_train_channel_eq_delay);

 u8 drm_dp_link_rate_to_bw_code(int link_rate)
 {
 	switch (link_rate) {
 	case 162000:
 	default:
 		return DP_LINK_BW_1_62;
 	case 270000:
 		return DP_LINK_BW_2_7;
 	case 540000:
 		return DP_LINK_BW_5_4;
 	}
 }
 EXPORT_SYMBOL(drm_dp_link_rate_to_bw_code);

 int drm_dp_bw_code_to_link_rate(u8 link_bw)
 {
 	switch (link_bw) {
 	case DP_LINK_BW_1_62:
 	default:
 		return 162000;
 	case DP_LINK_BW_2_7:
 		return 270000;
 	case DP_LINK_BW_5_4:
 		return 540000;
 	}
 }
 EXPORT_SYMBOL(drm_dp_bw_code_to_link_rate);
	/*
	* Copyright © 2009 Keith Packard
	*
	* Permission to use, copy, modify, distribute, and sell this software and its
	* documentation for any purpose is hereby granted without fee, provided that
	* the above copyright notice appear in all copies and that both that copyright
	* notice and this permission notice appear in supporting documentation, and
	* that the name of the copyright holders not be used in advertising or
	* publicity pertaining to distribution of the software without specific,
	* written prior permission. The copyright holders make no representations
	* about the suitability of this software for any purpose. It is provided "as
	* is" without express or implied warranty.
	*
	* THE COPYRIGHT HOLDERS DISCLAIM ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
	* INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO
	* EVENT SHALL THE COPYRIGHT HOLDERS BE LIABLE FOR ANY SPECIAL, INDIRECT OR
	* CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE,
	* DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER
	* TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE
	* OF THIS SOFTWARE.
	*/

	#include <linux/kernel.h>
	#include <linux/module.h>
	#include <linux/delay.h>
	#include <linux/init.h>
	#include <linux/errno.h>
	#include <linux/sched.h>
	#include <linux/i2c.h>
	#include <drm/drm_dp_helper.h>
	#include <drm/drmP.h>

	/**
	* DOC: dp helpers
	*
	* These functions contain some common logic and helpers at various abstraction
	* levels to deal with Display Port sink devices and related things like DP aux
	* channel transfers, EDID reading over DP aux channels, decoding certain DPCD
	* blocks, ...
	*/

	/* Run a single AUX_CH I2C transaction, writing/reading data as necessary */
	static int
	i2c_algo_dp_aux_transaction(struct i2c_adapter *adapter, int mode,
	uint8_t write_byte, uint8_t *read_byte)
	{
	struct i2c_algo_dp_aux_data *algo_data = adapter->algo_data;
	int ret;

	ret = (*algo_data->aux_ch)(adapter, mode,
	write_byte, read_byte);
	return ret;
	}

	/*
	* I2C over AUX CH
	*/

	/*
	* Send the address. If the I2C link is running, this 'restarts'
	* the connection with the new address, this is used for doing
	* a write followed by a read (as needed for DDC)
	*/
	static int
	i2c_algo_dp_aux_address(struct i2c_adapter *adapter, u16 address, bool reading)
	{
	struct i2c_algo_dp_aux_data *algo_data = adapter->algo_data;
	int mode = MODE_I2C_START;
	int ret;

	if (reading)
	mode \|= MODE_I2C_READ;
	else
	mode \|= MODE_I2C_WRITE;
	algo_data->address = address;
	algo_data->running = true;
	ret = i2c_algo_dp_aux_transaction(adapter, mode, 0, NULL);
	return ret;
	}

	/*
	* Stop the I2C transaction. This closes out the link, sending
	* a bare address packet with the MOT bit turned off
	*/
	static void
	i2c_algo_dp_aux_stop(struct i2c_adapter *adapter, bool reading)
	{
	struct i2c_algo_dp_aux_data *algo_data = adapter->algo_data;
	int mode = MODE_I2C_STOP;

	if (reading)
	mode \|= MODE_I2C_READ;
	else
	mode \|= MODE_I2C_WRITE;
	if (algo_data->running) {
	(void) i2c_algo_dp_aux_transaction(adapter, mode, 0, NULL);
	algo_data->running = false;
	}
	}

	/*
	* Write a single byte to the current I2C address, the
	* the I2C link must be running or this returns -EIO
	*/
	static int
	i2c_algo_dp_aux_put_byte(struct i2c_adapter *adapter, u8 byte)
	{
	struct i2c_algo_dp_aux_data *algo_data = adapter->algo_data;
	int ret;

	if (!algo_data->running)
	return -EIO;

	ret = i2c_algo_dp_aux_transaction(adapter, MODE_I2C_WRITE, byte, NULL);
	return ret;
	}

	/*
	* Read a single byte from the current I2C address, the
	* I2C link must be running or this returns -EIO
	*/
	static int
	i2c_algo_dp_aux_get_byte(struct i2c_adapter adapter, u8 byte_ret)
	{
	struct i2c_algo_dp_aux_data *algo_data = adapter->algo_data;
	int ret;

	if (!algo_data->running)
	return -EIO;

	ret = i2c_algo_dp_aux_transaction(adapter, MODE_I2C_READ, 0, byte_ret);
	return ret;
	}

	static int
	i2c_algo_dp_aux_xfer(struct i2c_adapter *adapter,
	struct i2c_msg *msgs,
	int num)
	{
	int ret = 0;
	bool reading = false;
	int m;
	int b;

	for (m = 0; m < num; m++) {
	u16 len = msgs[m].len;
	u8 *buf = msgs[m].buf;
	reading = (msgs[m].flags & I2C_M_RD) != 0;
	ret = i2c_algo_dp_aux_address(adapter, msgs[m].addr, reading);
	if (ret < 0)
	break;
	if (reading) {
	for (b = 0; b < len; b++) {
	ret = i2c_algo_dp_aux_get_byte(adapter, &buf[b]);
	if (ret < 0)
	break;
	}
	} else {
	for (b = 0; b < len; b++) {
	ret = i2c_algo_dp_aux_put_byte(adapter, buf[b]);
	if (ret < 0)
	break;
	}
	}
	if (ret < 0)
	break;
	}
	if (ret >= 0)
	ret = num;
	i2c_algo_dp_aux_stop(adapter, reading);
	DRM_DEBUG_KMS("dp_aux_xfer return %d\n", ret);
	return ret;
	}

	static u32
	i2c_algo_dp_aux_functionality(struct i2c_adapter *adapter)
	{
	return I2C_FUNC_I2C \| I2C_FUNC_SMBUS_EMUL \|
	I2C_FUNC_SMBUS_READ_BLOCK_DATA \|
	I2C_FUNC_SMBUS_BLOCK_PROC_CALL \|
	I2C_FUNC_10BIT_ADDR;
	}

	static const struct i2c_algorithm i2c_dp_aux_algo = {
	.master_xfer = i2c_algo_dp_aux_xfer,
	.functionality = i2c_algo_dp_aux_functionality,
	};

	static void
	i2c_dp_aux_reset_bus(struct i2c_adapter *adapter)
	{
	(void) i2c_algo_dp_aux_address(adapter, 0, false);
	(void) i2c_algo_dp_aux_stop(adapter, false);
	}

	static int
	i2c_dp_aux_prepare_bus(struct i2c_adapter *adapter)
	{
	adapter->algo = &i2c_dp_aux_algo;
	adapter->retries = 3;
	i2c_dp_aux_reset_bus(adapter);
	return 0;
	}

	/**
	* i2c_dp_aux_add_bus() - register an i2c adapter using the aux ch helper
	* @adapter: i2c adapter to register
	*
	* This registers an i2c adapater that uses dp aux channel as it's underlaying
	* transport. The driver needs to fill out the &i2c_algo_dp_aux_data structure
	* and store it in the algo_data member of the @adapter argument. This will be
	* used by the i2c over dp aux algorithm to drive the hardware.
	*
	* RETURNS:
	* 0 on success, -ERRNO on failure.
	*/
	int
	i2c_dp_aux_add_bus(struct i2c_adapter *adapter)
	{
	int error;

	error = i2c_dp_aux_prepare_bus(adapter);
	if (error)
	return error;
	error = i2c_add_adapter(adapter);
	return error;
	}
	EXPORT_SYMBOL(i2c_dp_aux_add_bus);

	/* Helpers for DP link training */
	static u8 dp_link_status(u8 link_status[DP_LINK_STATUS_SIZE], int r)
	{
	return link_status[r - DP_LANE0_1_STATUS];
	}

	static u8 dp_get_lane_status(u8 link_status[DP_LINK_STATUS_SIZE],
	int lane)
	{
	int i = DP_LANE0_1_STATUS + (lane >> 1);
	int s = (lane & 1) * 4;
	u8 l = dp_link_status(link_status, i);
	return (l >> s) & 0xf;
	}

	bool drm_dp_channel_eq_ok(u8 link_status[DP_LINK_STATUS_SIZE],
	int lane_count)
	{
	u8 lane_align;
	u8 lane_status;
	int lane;

	lane_align = dp_link_status(link_status,
	DP_LANE_ALIGN_STATUS_UPDATED);
	if ((lane_align & DP_INTERLANE_ALIGN_DONE) == 0)
	return false;
	for (lane = 0; lane < lane_count; lane++) {
	lane_status = dp_get_lane_status(link_status, lane);
	if ((lane_status & DP_CHANNEL_EQ_BITS) != DP_CHANNEL_EQ_BITS)
	return false;
	}
	return true;
	}
	EXPORT_SYMBOL(drm_dp_channel_eq_ok);

	bool drm_dp_clock_recovery_ok(u8 link_status[DP_LINK_STATUS_SIZE],
	int lane_count)
	{
	int lane;
	u8 lane_status;

	for (lane = 0; lane < lane_count; lane++) {
	lane_status = dp_get_lane_status(link_status, lane);
	if ((lane_status & DP_LANE_CR_DONE) == 0)
	return false;
	}
	return true;
	}
	EXPORT_SYMBOL(drm_dp_clock_recovery_ok);

	u8 drm_dp_get_adjust_request_voltage(u8 link_status[DP_LINK_STATUS_SIZE],
	int lane)
	{
	int i = DP_ADJUST_REQUEST_LANE0_1 + (lane >> 1);
	int s = ((lane & 1) ?
	DP_ADJUST_VOLTAGE_SWING_LANE1_SHIFT :
	DP_ADJUST_VOLTAGE_SWING_LANE0_SHIFT);
	u8 l = dp_link_status(link_status, i);

	return ((l >> s) & 0x3) << DP_TRAIN_VOLTAGE_SWING_SHIFT;
	}
	EXPORT_SYMBOL(drm_dp_get_adjust_request_voltage);

	u8 drm_dp_get_adjust_request_pre_emphasis(u8 link_status[DP_LINK_STATUS_SIZE],
	int lane)
	{
	int i = DP_ADJUST_REQUEST_LANE0_1 + (lane >> 1);
	int s = ((lane & 1) ?
	DP_ADJUST_PRE_EMPHASIS_LANE1_SHIFT :
	DP_ADJUST_PRE_EMPHASIS_LANE0_SHIFT);
	u8 l = dp_link_status(link_status, i);

	return ((l >> s) & 0x3) << DP_TRAIN_PRE_EMPHASIS_SHIFT;
	}
	EXPORT_SYMBOL(drm_dp_get_adjust_request_pre_emphasis);

	void drm_dp_link_train_clock_recovery_delay(u8 dpcd[DP_RECEIVER_CAP_SIZE]) {
	if (dpcd[DP_TRAINING_AUX_RD_INTERVAL] == 0)
	udelay(100);
	else
	mdelay(dpcd[DP_TRAINING_AUX_RD_INTERVAL] * 4);
	}
	EXPORT_SYMBOL(drm_dp_link_train_clock_recovery_delay);

	void drm_dp_link_train_channel_eq_delay(u8 dpcd[DP_RECEIVER_CAP_SIZE]) {
	if (dpcd[DP_TRAINING_AUX_RD_INTERVAL] == 0)
	udelay(400);
	else
	mdelay(dpcd[DP_TRAINING_AUX_RD_INTERVAL] * 4);
	}
	EXPORT_SYMBOL(drm_dp_link_train_channel_eq_delay);

	u8 drm_dp_link_rate_to_bw_code(int link_rate)
	{
	switch (link_rate) {
	case 162000:
	default:
	return DP_LINK_BW_1_62;
	case 270000:
	return DP_LINK_BW_2_7;
	case 540000:
	return DP_LINK_BW_5_4;
	}
	}
	EXPORT_SYMBOL(drm_dp_link_rate_to_bw_code);

	int drm_dp_bw_code_to_link_rate(u8 link_bw)
	{
	switch (link_bw) {
	case DP_LINK_BW_1_62:
	default:
	return 162000;
	case DP_LINK_BW_2_7:
	return 270000;
	case DP_LINK_BW_5_4:
	return 540000;
	}
	}
	EXPORT_SYMBOL(drm_dp_bw_code_to_link_rate);