| /* |
| * usbmidi.c - ALSA USB MIDI driver |
| * |
| * Copyright (c) 2002-2005 Clemens Ladisch |
| * All rights reserved. |
| * |
| * Based on the OSS usb-midi driver by NAGANO Daisuke, |
| * NetBSD's umidi driver by Takuya SHIOZAKI, |
| * the "USB Device Class Definition for MIDI Devices" by Roland |
| * |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that the following conditions |
| * are met: |
| * 1. Redistributions of source code must retain the above copyright |
| * notice, this list of conditions, and the following disclaimer, |
| * without modification. |
| * 2. The name of the author may not be used to endorse or promote products |
| * derived from this software without specific prior written permission. |
| * |
| * Alternatively, this software may be distributed and/or modified under the |
| * terms of the GNU General Public License as published by the Free Software |
| * Foundation; either version 2 of the License, or (at your option) any later |
| * version. |
| * |
| * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND |
| * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE |
| * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE |
| * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR |
| * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL |
| * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS |
| * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) |
| * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT |
| * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY |
| * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF |
| * SUCH DAMAGE. |
| */ |
| |
| #include <sound/driver.h> |
| #include <linux/kernel.h> |
| #include <linux/types.h> |
| #include <linux/bitops.h> |
| #include <linux/interrupt.h> |
| #include <linux/spinlock.h> |
| #include <linux/string.h> |
| #include <linux/init.h> |
| #include <linux/slab.h> |
| #include <linux/timer.h> |
| #include <linux/usb.h> |
| #include <sound/core.h> |
| #include <sound/rawmidi.h> |
| #include "usbaudio.h" |
| |
| |
| /* |
| * define this to log all USB packets |
| */ |
| /* #define DUMP_PACKETS */ |
| |
| /* |
| * how long to wait after some USB errors, so that khubd can disconnect() us |
| * without too many spurious errors |
| */ |
| #define ERROR_DELAY_JIFFIES (HZ / 10) |
| |
| |
| MODULE_AUTHOR("Clemens Ladisch <clemens@ladisch.de>"); |
| MODULE_DESCRIPTION("USB Audio/MIDI helper module"); |
| MODULE_LICENSE("Dual BSD/GPL"); |
| |
| |
| struct usb_ms_header_descriptor { |
| __u8 bLength; |
| __u8 bDescriptorType; |
| __u8 bDescriptorSubtype; |
| __u8 bcdMSC[2]; |
| __le16 wTotalLength; |
| } __attribute__ ((packed)); |
| |
| struct usb_ms_endpoint_descriptor { |
| __u8 bLength; |
| __u8 bDescriptorType; |
| __u8 bDescriptorSubtype; |
| __u8 bNumEmbMIDIJack; |
| __u8 baAssocJackID[0]; |
| } __attribute__ ((packed)); |
| |
| typedef struct snd_usb_midi snd_usb_midi_t; |
| typedef struct snd_usb_midi_endpoint snd_usb_midi_endpoint_t; |
| typedef struct snd_usb_midi_out_endpoint snd_usb_midi_out_endpoint_t; |
| typedef struct snd_usb_midi_in_endpoint snd_usb_midi_in_endpoint_t; |
| typedef struct usbmidi_out_port usbmidi_out_port_t; |
| typedef struct usbmidi_in_port usbmidi_in_port_t; |
| |
| struct usb_protocol_ops { |
| void (*input)(snd_usb_midi_in_endpoint_t*, uint8_t*, int); |
| void (*output)(snd_usb_midi_out_endpoint_t*); |
| void (*output_packet)(struct urb*, uint8_t, uint8_t, uint8_t, uint8_t); |
| void (*init_out_endpoint)(snd_usb_midi_out_endpoint_t*); |
| void (*finish_out_endpoint)(snd_usb_midi_out_endpoint_t*); |
| }; |
| |
| struct snd_usb_midi { |
| snd_usb_audio_t *chip; |
| struct usb_interface *iface; |
| const snd_usb_audio_quirk_t *quirk; |
| snd_rawmidi_t* rmidi; |
| struct usb_protocol_ops* usb_protocol_ops; |
| struct list_head list; |
| struct timer_list error_timer; |
| |
| struct snd_usb_midi_endpoint { |
| snd_usb_midi_out_endpoint_t *out; |
| snd_usb_midi_in_endpoint_t *in; |
| } endpoints[MIDI_MAX_ENDPOINTS]; |
| unsigned long input_triggered; |
| }; |
| |
| struct snd_usb_midi_out_endpoint { |
| snd_usb_midi_t* umidi; |
| struct urb* urb; |
| int urb_active; |
| int max_transfer; /* size of urb buffer */ |
| struct tasklet_struct tasklet; |
| |
| spinlock_t buffer_lock; |
| |
| struct usbmidi_out_port { |
| snd_usb_midi_out_endpoint_t* ep; |
| snd_rawmidi_substream_t* substream; |
| int active; |
| uint8_t cable; /* cable number << 4 */ |
| uint8_t state; |
| #define STATE_UNKNOWN 0 |
| #define STATE_1PARAM 1 |
| #define STATE_2PARAM_1 2 |
| #define STATE_2PARAM_2 3 |
| #define STATE_SYSEX_0 4 |
| #define STATE_SYSEX_1 5 |
| #define STATE_SYSEX_2 6 |
| uint8_t data[2]; |
| } ports[0x10]; |
| int current_port; |
| }; |
| |
| struct snd_usb_midi_in_endpoint { |
| snd_usb_midi_t* umidi; |
| struct urb* urb; |
| struct usbmidi_in_port { |
| snd_rawmidi_substream_t* substream; |
| } ports[0x10]; |
| u8 seen_f5; |
| u8 error_resubmit; |
| int current_port; |
| }; |
| |
| static void snd_usbmidi_do_output(snd_usb_midi_out_endpoint_t* ep); |
| |
| static const uint8_t snd_usbmidi_cin_length[] = { |
| 0, 0, 2, 3, 3, 1, 2, 3, 3, 3, 3, 3, 2, 2, 3, 1 |
| }; |
| |
| /* |
| * Submits the URB, with error handling. |
| */ |
| static int snd_usbmidi_submit_urb(struct urb* urb, gfp_t flags) |
| { |
| int err = usb_submit_urb(urb, flags); |
| if (err < 0 && err != -ENODEV) |
| snd_printk(KERN_ERR "usb_submit_urb: %d\n", err); |
| return err; |
| } |
| |
| /* |
| * Error handling for URB completion functions. |
| */ |
| static int snd_usbmidi_urb_error(int status) |
| { |
| switch (status) { |
| /* manually unlinked, or device gone */ |
| case -ENOENT: |
| case -ECONNRESET: |
| case -ESHUTDOWN: |
| case -ENODEV: |
| return -ENODEV; |
| /* errors that might occur during unplugging */ |
| case -EPROTO: /* EHCI */ |
| case -ETIMEDOUT: /* OHCI */ |
| case -EILSEQ: /* UHCI */ |
| return -EIO; |
| default: |
| snd_printk(KERN_ERR "urb status %d\n", status); |
| return 0; /* continue */ |
| } |
| } |
| |
| /* |
| * Receives a chunk of MIDI data. |
| */ |
| static void snd_usbmidi_input_data(snd_usb_midi_in_endpoint_t* ep, int portidx, |
| uint8_t* data, int length) |
| { |
| usbmidi_in_port_t* port = &ep->ports[portidx]; |
| |
| if (!port->substream) { |
| snd_printd("unexpected port %d!\n", portidx); |
| return; |
| } |
| if (!test_bit(port->substream->number, &ep->umidi->input_triggered)) |
| return; |
| snd_rawmidi_receive(port->substream, data, length); |
| } |
| |
| #ifdef DUMP_PACKETS |
| static void dump_urb(const char *type, const u8 *data, int length) |
| { |
| snd_printk(KERN_DEBUG "%s packet: [", type); |
| for (; length > 0; ++data, --length) |
| printk(" %02x", *data); |
| printk(" ]\n"); |
| } |
| #else |
| #define dump_urb(type, data, length) /* nothing */ |
| #endif |
| |
| /* |
| * Processes the data read from the device. |
| */ |
| static void snd_usbmidi_in_urb_complete(struct urb* urb, struct pt_regs *regs) |
| { |
| snd_usb_midi_in_endpoint_t* ep = urb->context; |
| |
| if (urb->status == 0) { |
| dump_urb("received", urb->transfer_buffer, urb->actual_length); |
| ep->umidi->usb_protocol_ops->input(ep, urb->transfer_buffer, |
| urb->actual_length); |
| } else { |
| int err = snd_usbmidi_urb_error(urb->status); |
| if (err < 0) { |
| if (err != -ENODEV) { |
| ep->error_resubmit = 1; |
| mod_timer(&ep->umidi->error_timer, |
| jiffies + ERROR_DELAY_JIFFIES); |
| } |
| return; |
| } |
| } |
| |
| urb->dev = ep->umidi->chip->dev; |
| snd_usbmidi_submit_urb(urb, GFP_ATOMIC); |
| } |
| |
| static void snd_usbmidi_out_urb_complete(struct urb* urb, struct pt_regs *regs) |
| { |
| snd_usb_midi_out_endpoint_t* ep = urb->context; |
| |
| spin_lock(&ep->buffer_lock); |
| ep->urb_active = 0; |
| spin_unlock(&ep->buffer_lock); |
| if (urb->status < 0) { |
| int err = snd_usbmidi_urb_error(urb->status); |
| if (err < 0) { |
| if (err != -ENODEV) |
| mod_timer(&ep->umidi->error_timer, |
| jiffies + ERROR_DELAY_JIFFIES); |
| return; |
| } |
| } |
| snd_usbmidi_do_output(ep); |
| } |
| |
| /* |
| * This is called when some data should be transferred to the device |
| * (from one or more substreams). |
| */ |
| static void snd_usbmidi_do_output(snd_usb_midi_out_endpoint_t* ep) |
| { |
| struct urb* urb = ep->urb; |
| unsigned long flags; |
| |
| spin_lock_irqsave(&ep->buffer_lock, flags); |
| if (ep->urb_active || ep->umidi->chip->shutdown) { |
| spin_unlock_irqrestore(&ep->buffer_lock, flags); |
| return; |
| } |
| |
| urb->transfer_buffer_length = 0; |
| ep->umidi->usb_protocol_ops->output(ep); |
| |
| if (urb->transfer_buffer_length > 0) { |
| dump_urb("sending", urb->transfer_buffer, |
| urb->transfer_buffer_length); |
| urb->dev = ep->umidi->chip->dev; |
| ep->urb_active = snd_usbmidi_submit_urb(urb, GFP_ATOMIC) >= 0; |
| } |
| spin_unlock_irqrestore(&ep->buffer_lock, flags); |
| } |
| |
| static void snd_usbmidi_out_tasklet(unsigned long data) |
| { |
| snd_usb_midi_out_endpoint_t* ep = (snd_usb_midi_out_endpoint_t *) data; |
| |
| snd_usbmidi_do_output(ep); |
| } |
| |
| /* called after transfers had been interrupted due to some USB error */ |
| static void snd_usbmidi_error_timer(unsigned long data) |
| { |
| snd_usb_midi_t *umidi = (snd_usb_midi_t *)data; |
| int i; |
| |
| for (i = 0; i < MIDI_MAX_ENDPOINTS; ++i) { |
| snd_usb_midi_in_endpoint_t *in = umidi->endpoints[i].in; |
| if (in && in->error_resubmit) { |
| in->error_resubmit = 0; |
| in->urb->dev = umidi->chip->dev; |
| snd_usbmidi_submit_urb(in->urb, GFP_ATOMIC); |
| } |
| if (umidi->endpoints[i].out) |
| snd_usbmidi_do_output(umidi->endpoints[i].out); |
| } |
| } |
| |
| /* helper function to send static data that may not DMA-able */ |
| static int send_bulk_static_data(snd_usb_midi_out_endpoint_t* ep, |
| const void *data, int len) |
| { |
| int err; |
| void *buf = kmalloc(len, GFP_KERNEL); |
| if (!buf) |
| return -ENOMEM; |
| memcpy(buf, data, len); |
| dump_urb("sending", buf, len); |
| err = usb_bulk_msg(ep->umidi->chip->dev, ep->urb->pipe, buf, len, |
| NULL, 250); |
| kfree(buf); |
| return err; |
| } |
| |
| /* |
| * Standard USB MIDI protocol: see the spec. |
| * Midiman protocol: like the standard protocol, but the control byte is the |
| * fourth byte in each packet, and uses length instead of CIN. |
| */ |
| |
| static void snd_usbmidi_standard_input(snd_usb_midi_in_endpoint_t* ep, |
| uint8_t* buffer, int buffer_length) |
| { |
| int i; |
| |
| for (i = 0; i + 3 < buffer_length; i += 4) |
| if (buffer[i] != 0) { |
| int cable = buffer[i] >> 4; |
| int length = snd_usbmidi_cin_length[buffer[i] & 0x0f]; |
| snd_usbmidi_input_data(ep, cable, &buffer[i + 1], length); |
| } |
| } |
| |
| static void snd_usbmidi_midiman_input(snd_usb_midi_in_endpoint_t* ep, |
| uint8_t* buffer, int buffer_length) |
| { |
| int i; |
| |
| for (i = 0; i + 3 < buffer_length; i += 4) |
| if (buffer[i + 3] != 0) { |
| int port = buffer[i + 3] >> 4; |
| int length = buffer[i + 3] & 3; |
| snd_usbmidi_input_data(ep, port, &buffer[i], length); |
| } |
| } |
| |
| /* |
| * Adds one USB MIDI packet to the output buffer. |
| */ |
| static void snd_usbmidi_output_standard_packet(struct urb* urb, uint8_t p0, |
| uint8_t p1, uint8_t p2, uint8_t p3) |
| { |
| |
| uint8_t* buf = (uint8_t*)urb->transfer_buffer + urb->transfer_buffer_length; |
| buf[0] = p0; |
| buf[1] = p1; |
| buf[2] = p2; |
| buf[3] = p3; |
| urb->transfer_buffer_length += 4; |
| } |
| |
| /* |
| * Adds one Midiman packet to the output buffer. |
| */ |
| static void snd_usbmidi_output_midiman_packet(struct urb* urb, uint8_t p0, |
| uint8_t p1, uint8_t p2, uint8_t p3) |
| { |
| |
| uint8_t* buf = (uint8_t*)urb->transfer_buffer + urb->transfer_buffer_length; |
| buf[0] = p1; |
| buf[1] = p2; |
| buf[2] = p3; |
| buf[3] = (p0 & 0xf0) | snd_usbmidi_cin_length[p0 & 0x0f]; |
| urb->transfer_buffer_length += 4; |
| } |
| |
| /* |
| * Converts MIDI commands to USB MIDI packets. |
| */ |
| static void snd_usbmidi_transmit_byte(usbmidi_out_port_t* port, |
| uint8_t b, struct urb* urb) |
| { |
| uint8_t p0 = port->cable; |
| void (*output_packet)(struct urb*, uint8_t, uint8_t, uint8_t, uint8_t) = |
| port->ep->umidi->usb_protocol_ops->output_packet; |
| |
| if (b >= 0xf8) { |
| output_packet(urb, p0 | 0x0f, b, 0, 0); |
| } else if (b >= 0xf0) { |
| switch (b) { |
| case 0xf0: |
| port->data[0] = b; |
| port->state = STATE_SYSEX_1; |
| break; |
| case 0xf1: |
| case 0xf3: |
| port->data[0] = b; |
| port->state = STATE_1PARAM; |
| break; |
| case 0xf2: |
| port->data[0] = b; |
| port->state = STATE_2PARAM_1; |
| break; |
| case 0xf4: |
| case 0xf5: |
| port->state = STATE_UNKNOWN; |
| break; |
| case 0xf6: |
| output_packet(urb, p0 | 0x05, 0xf6, 0, 0); |
| port->state = STATE_UNKNOWN; |
| break; |
| case 0xf7: |
| switch (port->state) { |
| case STATE_SYSEX_0: |
| output_packet(urb, p0 | 0x05, 0xf7, 0, 0); |
| break; |
| case STATE_SYSEX_1: |
| output_packet(urb, p0 | 0x06, port->data[0], 0xf7, 0); |
| break; |
| case STATE_SYSEX_2: |
| output_packet(urb, p0 | 0x07, port->data[0], port->data[1], 0xf7); |
| break; |
| } |
| port->state = STATE_UNKNOWN; |
| break; |
| } |
| } else if (b >= 0x80) { |
| port->data[0] = b; |
| if (b >= 0xc0 && b <= 0xdf) |
| port->state = STATE_1PARAM; |
| else |
| port->state = STATE_2PARAM_1; |
| } else { /* b < 0x80 */ |
| switch (port->state) { |
| case STATE_1PARAM: |
| if (port->data[0] < 0xf0) { |
| p0 |= port->data[0] >> 4; |
| } else { |
| p0 |= 0x02; |
| port->state = STATE_UNKNOWN; |
| } |
| output_packet(urb, p0, port->data[0], b, 0); |
| break; |
| case STATE_2PARAM_1: |
| port->data[1] = b; |
| port->state = STATE_2PARAM_2; |
| break; |
| case STATE_2PARAM_2: |
| if (port->data[0] < 0xf0) { |
| p0 |= port->data[0] >> 4; |
| port->state = STATE_2PARAM_1; |
| } else { |
| p0 |= 0x03; |
| port->state = STATE_UNKNOWN; |
| } |
| output_packet(urb, p0, port->data[0], port->data[1], b); |
| break; |
| case STATE_SYSEX_0: |
| port->data[0] = b; |
| port->state = STATE_SYSEX_1; |
| break; |
| case STATE_SYSEX_1: |
| port->data[1] = b; |
| port->state = STATE_SYSEX_2; |
| break; |
| case STATE_SYSEX_2: |
| output_packet(urb, p0 | 0x04, port->data[0], port->data[1], b); |
| port->state = STATE_SYSEX_0; |
| break; |
| } |
| } |
| } |
| |
| static void snd_usbmidi_standard_output(snd_usb_midi_out_endpoint_t* ep) |
| { |
| struct urb* urb = ep->urb; |
| int p; |
| |
| /* FIXME: lower-numbered ports can starve higher-numbered ports */ |
| for (p = 0; p < 0x10; ++p) { |
| usbmidi_out_port_t* port = &ep->ports[p]; |
| if (!port->active) |
| continue; |
| while (urb->transfer_buffer_length + 3 < ep->max_transfer) { |
| uint8_t b; |
| if (snd_rawmidi_transmit(port->substream, &b, 1) != 1) { |
| port->active = 0; |
| break; |
| } |
| snd_usbmidi_transmit_byte(port, b, urb); |
| } |
| } |
| } |
| |
| static struct usb_protocol_ops snd_usbmidi_standard_ops = { |
| .input = snd_usbmidi_standard_input, |
| .output = snd_usbmidi_standard_output, |
| .output_packet = snd_usbmidi_output_standard_packet, |
| }; |
| |
| static struct usb_protocol_ops snd_usbmidi_midiman_ops = { |
| .input = snd_usbmidi_midiman_input, |
| .output = snd_usbmidi_standard_output, |
| .output_packet = snd_usbmidi_output_midiman_packet, |
| }; |
| |
| /* |
| * Novation USB MIDI protocol: number of data bytes is in the first byte |
| * (when receiving) (+1!) or in the second byte (when sending); data begins |
| * at the third byte. |
| */ |
| |
| static void snd_usbmidi_novation_input(snd_usb_midi_in_endpoint_t* ep, |
| uint8_t* buffer, int buffer_length) |
| { |
| if (buffer_length < 2 || !buffer[0] || buffer_length < buffer[0] + 1) |
| return; |
| snd_usbmidi_input_data(ep, 0, &buffer[2], buffer[0] - 1); |
| } |
| |
| static void snd_usbmidi_novation_output(snd_usb_midi_out_endpoint_t* ep) |
| { |
| uint8_t* transfer_buffer; |
| int count; |
| |
| if (!ep->ports[0].active) |
| return; |
| transfer_buffer = ep->urb->transfer_buffer; |
| count = snd_rawmidi_transmit(ep->ports[0].substream, |
| &transfer_buffer[2], |
| ep->max_transfer - 2); |
| if (count < 1) { |
| ep->ports[0].active = 0; |
| return; |
| } |
| transfer_buffer[0] = 0; |
| transfer_buffer[1] = count; |
| ep->urb->transfer_buffer_length = 2 + count; |
| } |
| |
| static struct usb_protocol_ops snd_usbmidi_novation_ops = { |
| .input = snd_usbmidi_novation_input, |
| .output = snd_usbmidi_novation_output, |
| }; |
| |
| /* |
| * "raw" protocol: used by the MOTU FastLane. |
| */ |
| |
| static void snd_usbmidi_raw_input(snd_usb_midi_in_endpoint_t* ep, |
| uint8_t* buffer, int buffer_length) |
| { |
| snd_usbmidi_input_data(ep, 0, buffer, buffer_length); |
| } |
| |
| static void snd_usbmidi_raw_output(snd_usb_midi_out_endpoint_t* ep) |
| { |
| int count; |
| |
| if (!ep->ports[0].active) |
| return; |
| count = snd_rawmidi_transmit(ep->ports[0].substream, |
| ep->urb->transfer_buffer, |
| ep->max_transfer); |
| if (count < 1) { |
| ep->ports[0].active = 0; |
| return; |
| } |
| ep->urb->transfer_buffer_length = count; |
| } |
| |
| static struct usb_protocol_ops snd_usbmidi_raw_ops = { |
| .input = snd_usbmidi_raw_input, |
| .output = snd_usbmidi_raw_output, |
| }; |
| |
| /* |
| * Emagic USB MIDI protocol: raw MIDI with "F5 xx" port switching. |
| */ |
| |
| static void snd_usbmidi_emagic_init_out(snd_usb_midi_out_endpoint_t* ep) |
| { |
| static const u8 init_data[] = { |
| /* initialization magic: "get version" */ |
| 0xf0, |
| 0x00, 0x20, 0x31, /* Emagic */ |
| 0x64, /* Unitor8 */ |
| 0x0b, /* version number request */ |
| 0x00, /* command version */ |
| 0x00, /* EEPROM, box 0 */ |
| 0xf7 |
| }; |
| send_bulk_static_data(ep, init_data, sizeof(init_data)); |
| /* while we're at it, pour on more magic */ |
| send_bulk_static_data(ep, init_data, sizeof(init_data)); |
| } |
| |
| static void snd_usbmidi_emagic_finish_out(snd_usb_midi_out_endpoint_t* ep) |
| { |
| static const u8 finish_data[] = { |
| /* switch to patch mode with last preset */ |
| 0xf0, |
| 0x00, 0x20, 0x31, /* Emagic */ |
| 0x64, /* Unitor8 */ |
| 0x10, /* patch switch command */ |
| 0x00, /* command version */ |
| 0x7f, /* to all boxes */ |
| 0x40, /* last preset in EEPROM */ |
| 0xf7 |
| }; |
| send_bulk_static_data(ep, finish_data, sizeof(finish_data)); |
| } |
| |
| static void snd_usbmidi_emagic_input(snd_usb_midi_in_endpoint_t* ep, |
| uint8_t* buffer, int buffer_length) |
| { |
| int i; |
| |
| /* FF indicates end of valid data */ |
| for (i = 0; i < buffer_length; ++i) |
| if (buffer[i] == 0xff) { |
| buffer_length = i; |
| break; |
| } |
| |
| /* handle F5 at end of last buffer */ |
| if (ep->seen_f5) |
| goto switch_port; |
| |
| while (buffer_length > 0) { |
| /* determine size of data until next F5 */ |
| for (i = 0; i < buffer_length; ++i) |
| if (buffer[i] == 0xf5) |
| break; |
| snd_usbmidi_input_data(ep, ep->current_port, buffer, i); |
| buffer += i; |
| buffer_length -= i; |
| |
| if (buffer_length <= 0) |
| break; |
| /* assert(buffer[0] == 0xf5); */ |
| ep->seen_f5 = 1; |
| ++buffer; |
| --buffer_length; |
| |
| switch_port: |
| if (buffer_length <= 0) |
| break; |
| if (buffer[0] < 0x80) { |
| ep->current_port = (buffer[0] - 1) & 15; |
| ++buffer; |
| --buffer_length; |
| } |
| ep->seen_f5 = 0; |
| } |
| } |
| |
| static void snd_usbmidi_emagic_output(snd_usb_midi_out_endpoint_t* ep) |
| { |
| int port0 = ep->current_port; |
| uint8_t* buf = ep->urb->transfer_buffer; |
| int buf_free = ep->max_transfer; |
| int length, i; |
| |
| for (i = 0; i < 0x10; ++i) { |
| /* round-robin, starting at the last current port */ |
| int portnum = (port0 + i) & 15; |
| usbmidi_out_port_t* port = &ep->ports[portnum]; |
| |
| if (!port->active) |
| continue; |
| if (snd_rawmidi_transmit_peek(port->substream, buf, 1) != 1) { |
| port->active = 0; |
| continue; |
| } |
| |
| if (portnum != ep->current_port) { |
| if (buf_free < 2) |
| break; |
| ep->current_port = portnum; |
| buf[0] = 0xf5; |
| buf[1] = (portnum + 1) & 15; |
| buf += 2; |
| buf_free -= 2; |
| } |
| |
| if (buf_free < 1) |
| break; |
| length = snd_rawmidi_transmit(port->substream, buf, buf_free); |
| if (length > 0) { |
| buf += length; |
| buf_free -= length; |
| if (buf_free < 1) |
| break; |
| } |
| } |
| if (buf_free < ep->max_transfer && buf_free > 0) { |
| *buf = 0xff; |
| --buf_free; |
| } |
| ep->urb->transfer_buffer_length = ep->max_transfer - buf_free; |
| } |
| |
| static struct usb_protocol_ops snd_usbmidi_emagic_ops = { |
| .input = snd_usbmidi_emagic_input, |
| .output = snd_usbmidi_emagic_output, |
| .init_out_endpoint = snd_usbmidi_emagic_init_out, |
| .finish_out_endpoint = snd_usbmidi_emagic_finish_out, |
| }; |
| |
| |
| static int snd_usbmidi_output_open(snd_rawmidi_substream_t* substream) |
| { |
| snd_usb_midi_t* umidi = substream->rmidi->private_data; |
| usbmidi_out_port_t* port = NULL; |
| int i, j; |
| |
| for (i = 0; i < MIDI_MAX_ENDPOINTS; ++i) |
| if (umidi->endpoints[i].out) |
| for (j = 0; j < 0x10; ++j) |
| if (umidi->endpoints[i].out->ports[j].substream == substream) { |
| port = &umidi->endpoints[i].out->ports[j]; |
| break; |
| } |
| if (!port) { |
| snd_BUG(); |
| return -ENXIO; |
| } |
| substream->runtime->private_data = port; |
| port->state = STATE_UNKNOWN; |
| return 0; |
| } |
| |
| static int snd_usbmidi_output_close(snd_rawmidi_substream_t* substream) |
| { |
| return 0; |
| } |
| |
| static void snd_usbmidi_output_trigger(snd_rawmidi_substream_t* substream, int up) |
| { |
| usbmidi_out_port_t* port = (usbmidi_out_port_t*)substream->runtime->private_data; |
| |
| port->active = up; |
| if (up) { |
| if (port->ep->umidi->chip->shutdown) { |
| /* gobble up remaining bytes to prevent wait in |
| * snd_rawmidi_drain_output */ |
| while (!snd_rawmidi_transmit_empty(substream)) |
| snd_rawmidi_transmit_ack(substream, 1); |
| return; |
| } |
| tasklet_hi_schedule(&port->ep->tasklet); |
| } |
| } |
| |
| static int snd_usbmidi_input_open(snd_rawmidi_substream_t* substream) |
| { |
| return 0; |
| } |
| |
| static int snd_usbmidi_input_close(snd_rawmidi_substream_t* substream) |
| { |
| return 0; |
| } |
| |
| static void snd_usbmidi_input_trigger(snd_rawmidi_substream_t* substream, int up) |
| { |
| snd_usb_midi_t* umidi = substream->rmidi->private_data; |
| |
| if (up) |
| set_bit(substream->number, &umidi->input_triggered); |
| else |
| clear_bit(substream->number, &umidi->input_triggered); |
| } |
| |
| static snd_rawmidi_ops_t snd_usbmidi_output_ops = { |
| .open = snd_usbmidi_output_open, |
| .close = snd_usbmidi_output_close, |
| .trigger = snd_usbmidi_output_trigger, |
| }; |
| |
| static snd_rawmidi_ops_t snd_usbmidi_input_ops = { |
| .open = snd_usbmidi_input_open, |
| .close = snd_usbmidi_input_close, |
| .trigger = snd_usbmidi_input_trigger |
| }; |
| |
| /* |
| * Frees an input endpoint. |
| * May be called when ep hasn't been initialized completely. |
| */ |
| static void snd_usbmidi_in_endpoint_delete(snd_usb_midi_in_endpoint_t* ep) |
| { |
| if (ep->urb) { |
| usb_buffer_free(ep->umidi->chip->dev, |
| ep->urb->transfer_buffer_length, |
| ep->urb->transfer_buffer, |
| ep->urb->transfer_dma); |
| usb_free_urb(ep->urb); |
| } |
| kfree(ep); |
| } |
| |
| /* |
| * Creates an input endpoint. |
| */ |
| static int snd_usbmidi_in_endpoint_create(snd_usb_midi_t* umidi, |
| snd_usb_midi_endpoint_info_t* ep_info, |
| snd_usb_midi_endpoint_t* rep) |
| { |
| snd_usb_midi_in_endpoint_t* ep; |
| void* buffer; |
| unsigned int pipe; |
| int length; |
| |
| rep->in = NULL; |
| ep = kzalloc(sizeof(*ep), GFP_KERNEL); |
| if (!ep) |
| return -ENOMEM; |
| ep->umidi = umidi; |
| |
| ep->urb = usb_alloc_urb(0, GFP_KERNEL); |
| if (!ep->urb) { |
| snd_usbmidi_in_endpoint_delete(ep); |
| return -ENOMEM; |
| } |
| if (ep_info->in_interval) |
| pipe = usb_rcvintpipe(umidi->chip->dev, ep_info->in_ep); |
| else |
| pipe = usb_rcvbulkpipe(umidi->chip->dev, ep_info->in_ep); |
| length = usb_maxpacket(umidi->chip->dev, pipe, 0); |
| buffer = usb_buffer_alloc(umidi->chip->dev, length, GFP_KERNEL, |
| &ep->urb->transfer_dma); |
| if (!buffer) { |
| snd_usbmidi_in_endpoint_delete(ep); |
| return -ENOMEM; |
| } |
| if (ep_info->in_interval) |
| usb_fill_int_urb(ep->urb, umidi->chip->dev, pipe, buffer, |
| length, snd_usbmidi_in_urb_complete, ep, |
| ep_info->in_interval); |
| else |
| usb_fill_bulk_urb(ep->urb, umidi->chip->dev, pipe, buffer, |
| length, snd_usbmidi_in_urb_complete, ep); |
| ep->urb->transfer_flags = URB_NO_TRANSFER_DMA_MAP; |
| |
| rep->in = ep; |
| return 0; |
| } |
| |
| static unsigned int snd_usbmidi_count_bits(unsigned int x) |
| { |
| unsigned int bits = 0; |
| |
| for (; x; x >>= 1) |
| bits += x & 1; |
| return bits; |
| } |
| |
| /* |
| * Frees an output endpoint. |
| * May be called when ep hasn't been initialized completely. |
| */ |
| static void snd_usbmidi_out_endpoint_delete(snd_usb_midi_out_endpoint_t* ep) |
| { |
| if (ep->urb) { |
| usb_buffer_free(ep->umidi->chip->dev, ep->max_transfer, |
| ep->urb->transfer_buffer, |
| ep->urb->transfer_dma); |
| usb_free_urb(ep->urb); |
| } |
| kfree(ep); |
| } |
| |
| /* |
| * Creates an output endpoint, and initializes output ports. |
| */ |
| static int snd_usbmidi_out_endpoint_create(snd_usb_midi_t* umidi, |
| snd_usb_midi_endpoint_info_t* ep_info, |
| snd_usb_midi_endpoint_t* rep) |
| { |
| snd_usb_midi_out_endpoint_t* ep; |
| int i; |
| unsigned int pipe; |
| void* buffer; |
| |
| rep->out = NULL; |
| ep = kzalloc(sizeof(*ep), GFP_KERNEL); |
| if (!ep) |
| return -ENOMEM; |
| ep->umidi = umidi; |
| |
| ep->urb = usb_alloc_urb(0, GFP_KERNEL); |
| if (!ep->urb) { |
| snd_usbmidi_out_endpoint_delete(ep); |
| return -ENOMEM; |
| } |
| /* we never use interrupt output pipes */ |
| pipe = usb_sndbulkpipe(umidi->chip->dev, ep_info->out_ep); |
| ep->max_transfer = usb_maxpacket(umidi->chip->dev, pipe, 1); |
| buffer = usb_buffer_alloc(umidi->chip->dev, ep->max_transfer, |
| GFP_KERNEL, &ep->urb->transfer_dma); |
| if (!buffer) { |
| snd_usbmidi_out_endpoint_delete(ep); |
| return -ENOMEM; |
| } |
| usb_fill_bulk_urb(ep->urb, umidi->chip->dev, pipe, buffer, |
| ep->max_transfer, snd_usbmidi_out_urb_complete, ep); |
| ep->urb->transfer_flags = URB_NO_TRANSFER_DMA_MAP; |
| |
| spin_lock_init(&ep->buffer_lock); |
| tasklet_init(&ep->tasklet, snd_usbmidi_out_tasklet, (unsigned long)ep); |
| |
| for (i = 0; i < 0x10; ++i) |
| if (ep_info->out_cables & (1 << i)) { |
| ep->ports[i].ep = ep; |
| ep->ports[i].cable = i << 4; |
| } |
| |
| if (umidi->usb_protocol_ops->init_out_endpoint) |
| umidi->usb_protocol_ops->init_out_endpoint(ep); |
| |
| rep->out = ep; |
| return 0; |
| } |
| |
| /* |
| * Frees everything. |
| */ |
| static void snd_usbmidi_free(snd_usb_midi_t* umidi) |
| { |
| int i; |
| |
| for (i = 0; i < MIDI_MAX_ENDPOINTS; ++i) { |
| snd_usb_midi_endpoint_t* ep = &umidi->endpoints[i]; |
| if (ep->out) |
| snd_usbmidi_out_endpoint_delete(ep->out); |
| if (ep->in) |
| snd_usbmidi_in_endpoint_delete(ep->in); |
| } |
| kfree(umidi); |
| } |
| |
| /* |
| * Unlinks all URBs (must be done before the usb_device is deleted). |
| */ |
| void snd_usbmidi_disconnect(struct list_head* p) |
| { |
| snd_usb_midi_t* umidi; |
| int i; |
| |
| umidi = list_entry(p, snd_usb_midi_t, list); |
| del_timer_sync(&umidi->error_timer); |
| for (i = 0; i < MIDI_MAX_ENDPOINTS; ++i) { |
| snd_usb_midi_endpoint_t* ep = &umidi->endpoints[i]; |
| if (ep->out) |
| tasklet_kill(&ep->out->tasklet); |
| if (ep->out && ep->out->urb) { |
| usb_kill_urb(ep->out->urb); |
| if (umidi->usb_protocol_ops->finish_out_endpoint) |
| umidi->usb_protocol_ops->finish_out_endpoint(ep->out); |
| } |
| if (ep->in && ep->in->urb) |
| usb_kill_urb(ep->in->urb); |
| } |
| } |
| |
| static void snd_usbmidi_rawmidi_free(snd_rawmidi_t* rmidi) |
| { |
| snd_usb_midi_t* umidi = rmidi->private_data; |
| snd_usbmidi_free(umidi); |
| } |
| |
| static snd_rawmidi_substream_t* snd_usbmidi_find_substream(snd_usb_midi_t* umidi, |
| int stream, int number) |
| { |
| struct list_head* list; |
| |
| list_for_each(list, &umidi->rmidi->streams[stream].substreams) { |
| snd_rawmidi_substream_t* substream = list_entry(list, snd_rawmidi_substream_t, list); |
| if (substream->number == number) |
| return substream; |
| } |
| return NULL; |
| } |
| |
| /* |
| * This list specifies names for ports that do not fit into the standard |
| * "(product) MIDI (n)" schema because they aren't external MIDI ports, |
| * such as internal control or synthesizer ports. |
| */ |
| static struct { |
| u32 id; |
| int port; |
| const char *name_format; |
| } snd_usbmidi_port_names[] = { |
| /* Roland UA-100 */ |
| { USB_ID(0x0582, 0x0000), 2, "%s Control" }, |
| /* Roland SC-8850 */ |
| { USB_ID(0x0582, 0x0003), 0, "%s Part A" }, |
| { USB_ID(0x0582, 0x0003), 1, "%s Part B" }, |
| { USB_ID(0x0582, 0x0003), 2, "%s Part C" }, |
| { USB_ID(0x0582, 0x0003), 3, "%s Part D" }, |
| { USB_ID(0x0582, 0x0003), 4, "%s MIDI 1" }, |
| { USB_ID(0x0582, 0x0003), 5, "%s MIDI 2" }, |
| /* Roland U-8 */ |
| { USB_ID(0x0582, 0x0004), 0, "%s MIDI" }, |
| { USB_ID(0x0582, 0x0004), 1, "%s Control" }, |
| /* Roland SC-8820 */ |
| { USB_ID(0x0582, 0x0007), 0, "%s Part A" }, |
| { USB_ID(0x0582, 0x0007), 1, "%s Part B" }, |
| { USB_ID(0x0582, 0x0007), 2, "%s MIDI" }, |
| /* Roland SK-500 */ |
| { USB_ID(0x0582, 0x000b), 0, "%s Part A" }, |
| { USB_ID(0x0582, 0x000b), 1, "%s Part B" }, |
| { USB_ID(0x0582, 0x000b), 2, "%s MIDI" }, |
| /* Roland SC-D70 */ |
| { USB_ID(0x0582, 0x000c), 0, "%s Part A" }, |
| { USB_ID(0x0582, 0x000c), 1, "%s Part B" }, |
| { USB_ID(0x0582, 0x000c), 2, "%s MIDI" }, |
| /* Edirol UM-880 */ |
| { USB_ID(0x0582, 0x0014), 8, "%s Control" }, |
| /* Edirol SD-90 */ |
| { USB_ID(0x0582, 0x0016), 0, "%s Part A" }, |
| { USB_ID(0x0582, 0x0016), 1, "%s Part B" }, |
| { USB_ID(0x0582, 0x0016), 2, "%s MIDI 1" }, |
| { USB_ID(0x0582, 0x0016), 3, "%s MIDI 2" }, |
| /* Edirol UM-550 */ |
| { USB_ID(0x0582, 0x0023), 5, "%s Control" }, |
| /* Edirol SD-20 */ |
| { USB_ID(0x0582, 0x0027), 0, "%s Part A" }, |
| { USB_ID(0x0582, 0x0027), 1, "%s Part B" }, |
| { USB_ID(0x0582, 0x0027), 2, "%s MIDI" }, |
| /* Edirol SD-80 */ |
| { USB_ID(0x0582, 0x0029), 0, "%s Part A" }, |
| { USB_ID(0x0582, 0x0029), 1, "%s Part B" }, |
| { USB_ID(0x0582, 0x0029), 2, "%s MIDI 1" }, |
| { USB_ID(0x0582, 0x0029), 3, "%s MIDI 2" }, |
| /* Edirol UA-700 */ |
| { USB_ID(0x0582, 0x002b), 0, "%s MIDI" }, |
| { USB_ID(0x0582, 0x002b), 1, "%s Control" }, |
| /* Roland VariOS */ |
| { USB_ID(0x0582, 0x002f), 0, "%s MIDI" }, |
| { USB_ID(0x0582, 0x002f), 1, "%s External MIDI" }, |
| { USB_ID(0x0582, 0x002f), 2, "%s Sync" }, |
| /* Edirol PCR */ |
| { USB_ID(0x0582, 0x0033), 0, "%s MIDI" }, |
| { USB_ID(0x0582, 0x0033), 1, "%s 1" }, |
| { USB_ID(0x0582, 0x0033), 2, "%s 2" }, |
| /* BOSS GS-10 */ |
| { USB_ID(0x0582, 0x003b), 0, "%s MIDI" }, |
| { USB_ID(0x0582, 0x003b), 1, "%s Control" }, |
| /* Edirol UA-1000 */ |
| { USB_ID(0x0582, 0x0044), 0, "%s MIDI" }, |
| { USB_ID(0x0582, 0x0044), 1, "%s Control" }, |
| /* Edirol UR-80 */ |
| { USB_ID(0x0582, 0x0048), 0, "%s MIDI" }, |
| { USB_ID(0x0582, 0x0048), 1, "%s 1" }, |
| { USB_ID(0x0582, 0x0048), 2, "%s 2" }, |
| /* Edirol PCR-A */ |
| { USB_ID(0x0582, 0x004d), 0, "%s MIDI" }, |
| { USB_ID(0x0582, 0x004d), 1, "%s 1" }, |
| { USB_ID(0x0582, 0x004d), 2, "%s 2" }, |
| /* M-Audio MidiSport 8x8 */ |
| { USB_ID(0x0763, 0x1031), 8, "%s Control" }, |
| { USB_ID(0x0763, 0x1033), 8, "%s Control" }, |
| /* MOTU Fastlane */ |
| { USB_ID(0x07fd, 0x0001), 0, "%s MIDI A" }, |
| { USB_ID(0x07fd, 0x0001), 1, "%s MIDI B" }, |
| /* Emagic Unitor8/AMT8/MT4 */ |
| { USB_ID(0x086a, 0x0001), 8, "%s Broadcast" }, |
| { USB_ID(0x086a, 0x0002), 8, "%s Broadcast" }, |
| { USB_ID(0x086a, 0x0003), 4, "%s Broadcast" }, |
| }; |
| |
| static void snd_usbmidi_init_substream(snd_usb_midi_t* umidi, |
| int stream, int number, |
| snd_rawmidi_substream_t** rsubstream) |
| { |
| int i; |
| const char *name_format; |
| |
| snd_rawmidi_substream_t* substream = snd_usbmidi_find_substream(umidi, stream, number); |
| if (!substream) { |
| snd_printd(KERN_ERR "substream %d:%d not found\n", stream, number); |
| return; |
| } |
| |
| /* TODO: read port name from jack descriptor */ |
| name_format = "%s MIDI %d"; |
| for (i = 0; i < ARRAY_SIZE(snd_usbmidi_port_names); ++i) { |
| if (snd_usbmidi_port_names[i].id == umidi->chip->usb_id && |
| snd_usbmidi_port_names[i].port == number) { |
| name_format = snd_usbmidi_port_names[i].name_format; |
| break; |
| } |
| } |
| snprintf(substream->name, sizeof(substream->name), |
| name_format, umidi->chip->card->shortname, number + 1); |
| |
| *rsubstream = substream; |
| } |
| |
| /* |
| * Creates the endpoints and their ports. |
| */ |
| static int snd_usbmidi_create_endpoints(snd_usb_midi_t* umidi, |
| snd_usb_midi_endpoint_info_t* endpoints) |
| { |
| int i, j, err; |
| int out_ports = 0, in_ports = 0; |
| |
| for (i = 0; i < MIDI_MAX_ENDPOINTS; ++i) { |
| if (endpoints[i].out_cables) { |
| err = snd_usbmidi_out_endpoint_create(umidi, &endpoints[i], |
| &umidi->endpoints[i]); |
| if (err < 0) |
| return err; |
| } |
| if (endpoints[i].in_cables) { |
| err = snd_usbmidi_in_endpoint_create(umidi, &endpoints[i], |
| &umidi->endpoints[i]); |
| if (err < 0) |
| return err; |
| } |
| |
| for (j = 0; j < 0x10; ++j) { |
| if (endpoints[i].out_cables & (1 << j)) { |
| snd_usbmidi_init_substream(umidi, SNDRV_RAWMIDI_STREAM_OUTPUT, out_ports, |
| &umidi->endpoints[i].out->ports[j].substream); |
| ++out_ports; |
| } |
| if (endpoints[i].in_cables & (1 << j)) { |
| snd_usbmidi_init_substream(umidi, SNDRV_RAWMIDI_STREAM_INPUT, in_ports, |
| &umidi->endpoints[i].in->ports[j].substream); |
| ++in_ports; |
| } |
| } |
| } |
| snd_printdd(KERN_INFO "created %d output and %d input ports\n", |
| out_ports, in_ports); |
| return 0; |
| } |
| |
| /* |
| * Returns MIDIStreaming device capabilities. |
| */ |
| static int snd_usbmidi_get_ms_info(snd_usb_midi_t* umidi, |
| snd_usb_midi_endpoint_info_t* endpoints) |
| { |
| struct usb_interface* intf; |
| struct usb_host_interface *hostif; |
| struct usb_interface_descriptor* intfd; |
| struct usb_ms_header_descriptor* ms_header; |
| struct usb_host_endpoint *hostep; |
| struct usb_endpoint_descriptor* ep; |
| struct usb_ms_endpoint_descriptor* ms_ep; |
| int i, epidx; |
| |
| intf = umidi->iface; |
| if (!intf) |
| return -ENXIO; |
| hostif = &intf->altsetting[0]; |
| intfd = get_iface_desc(hostif); |
| ms_header = (struct usb_ms_header_descriptor*)hostif->extra; |
| if (hostif->extralen >= 7 && |
| ms_header->bLength >= 7 && |
| ms_header->bDescriptorType == USB_DT_CS_INTERFACE && |
| ms_header->bDescriptorSubtype == HEADER) |
| snd_printdd(KERN_INFO "MIDIStreaming version %02x.%02x\n", |
| ms_header->bcdMSC[1], ms_header->bcdMSC[0]); |
| else |
| snd_printk(KERN_WARNING "MIDIStreaming interface descriptor not found\n"); |
| |
| epidx = 0; |
| for (i = 0; i < intfd->bNumEndpoints; ++i) { |
| hostep = &hostif->endpoint[i]; |
| ep = get_ep_desc(hostep); |
| if ((ep->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) != USB_ENDPOINT_XFER_BULK && |
| (ep->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) != USB_ENDPOINT_XFER_INT) |
| continue; |
| ms_ep = (struct usb_ms_endpoint_descriptor*)hostep->extra; |
| if (hostep->extralen < 4 || |
| ms_ep->bLength < 4 || |
| ms_ep->bDescriptorType != USB_DT_CS_ENDPOINT || |
| ms_ep->bDescriptorSubtype != MS_GENERAL) |
| continue; |
| if ((ep->bEndpointAddress & USB_ENDPOINT_DIR_MASK) == USB_DIR_OUT) { |
| if (endpoints[epidx].out_ep) { |
| if (++epidx >= MIDI_MAX_ENDPOINTS) { |
| snd_printk(KERN_WARNING "too many endpoints\n"); |
| break; |
| } |
| } |
| endpoints[epidx].out_ep = ep->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK; |
| if ((ep->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) == USB_ENDPOINT_XFER_INT) |
| endpoints[epidx].out_interval = ep->bInterval; |
| endpoints[epidx].out_cables = (1 << ms_ep->bNumEmbMIDIJack) - 1; |
| snd_printdd(KERN_INFO "EP %02X: %d jack(s)\n", |
| ep->bEndpointAddress, ms_ep->bNumEmbMIDIJack); |
| } else { |
| if (endpoints[epidx].in_ep) { |
| if (++epidx >= MIDI_MAX_ENDPOINTS) { |
| snd_printk(KERN_WARNING "too many endpoints\n"); |
| break; |
| } |
| } |
| endpoints[epidx].in_ep = ep->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK; |
| if ((ep->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) == USB_ENDPOINT_XFER_INT) |
| endpoints[epidx].in_interval = ep->bInterval; |
| endpoints[epidx].in_cables = (1 << ms_ep->bNumEmbMIDIJack) - 1; |
| snd_printdd(KERN_INFO "EP %02X: %d jack(s)\n", |
| ep->bEndpointAddress, ms_ep->bNumEmbMIDIJack); |
| } |
| } |
| return 0; |
| } |
| |
| /* |
| * On Roland devices, use the second alternate setting to be able to use |
| * the interrupt input endpoint. |
| */ |
| static void snd_usbmidi_switch_roland_altsetting(snd_usb_midi_t* umidi) |
| { |
| struct usb_interface* intf; |
| struct usb_host_interface *hostif; |
| struct usb_interface_descriptor* intfd; |
| |
| intf = umidi->iface; |
| if (!intf || intf->num_altsetting != 2) |
| return; |
| |
| hostif = &intf->altsetting[1]; |
| intfd = get_iface_desc(hostif); |
| if (intfd->bNumEndpoints != 2 || |
| (get_endpoint(hostif, 0)->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) != USB_ENDPOINT_XFER_BULK || |
| (get_endpoint(hostif, 1)->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) != USB_ENDPOINT_XFER_INT) |
| return; |
| |
| snd_printdd(KERN_INFO "switching to altsetting %d with int ep\n", |
| intfd->bAlternateSetting); |
| usb_set_interface(umidi->chip->dev, intfd->bInterfaceNumber, |
| intfd->bAlternateSetting); |
| } |
| |
| /* |
| * Try to find any usable endpoints in the interface. |
| */ |
| static int snd_usbmidi_detect_endpoints(snd_usb_midi_t* umidi, |
| snd_usb_midi_endpoint_info_t* endpoint, |
| int max_endpoints) |
| { |
| struct usb_interface* intf; |
| struct usb_host_interface *hostif; |
| struct usb_interface_descriptor* intfd; |
| struct usb_endpoint_descriptor* epd; |
| int i, out_eps = 0, in_eps = 0; |
| |
| if (USB_ID_VENDOR(umidi->chip->usb_id) == 0x0582) |
| snd_usbmidi_switch_roland_altsetting(umidi); |
| |
| if (endpoint[0].out_ep || endpoint[0].in_ep) |
| return 0; |
| |
| intf = umidi->iface; |
| if (!intf || intf->num_altsetting < 1) |
| return -ENOENT; |
| hostif = intf->cur_altsetting; |
| intfd = get_iface_desc(hostif); |
| |
| for (i = 0; i < intfd->bNumEndpoints; ++i) { |
| epd = get_endpoint(hostif, i); |
| if ((epd->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) != USB_ENDPOINT_XFER_BULK && |
| (epd->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) != USB_ENDPOINT_XFER_INT) |
| continue; |
| if (out_eps < max_endpoints && |
| (epd->bEndpointAddress & USB_ENDPOINT_DIR_MASK) == USB_DIR_OUT) { |
| endpoint[out_eps].out_ep = epd->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK; |
| if ((epd->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) == USB_ENDPOINT_XFER_INT) |
| endpoint[out_eps].out_interval = epd->bInterval; |
| ++out_eps; |
| } |
| if (in_eps < max_endpoints && |
| (epd->bEndpointAddress & USB_ENDPOINT_DIR_MASK) == USB_DIR_IN) { |
| endpoint[in_eps].in_ep = epd->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK; |
| if ((epd->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) == USB_ENDPOINT_XFER_INT) |
| endpoint[in_eps].in_interval = epd->bInterval; |
| ++in_eps; |
| } |
| } |
| return (out_eps || in_eps) ? 0 : -ENOENT; |
| } |
| |
| /* |
| * Detects the endpoints for one-port-per-endpoint protocols. |
| */ |
| static int snd_usbmidi_detect_per_port_endpoints(snd_usb_midi_t* umidi, |
| snd_usb_midi_endpoint_info_t* endpoints) |
| { |
| int err, i; |
| |
| err = snd_usbmidi_detect_endpoints(umidi, endpoints, MIDI_MAX_ENDPOINTS); |
| for (i = 0; i < MIDI_MAX_ENDPOINTS; ++i) { |
| if (endpoints[i].out_ep) |
| endpoints[i].out_cables = 0x0001; |
| if (endpoints[i].in_ep) |
| endpoints[i].in_cables = 0x0001; |
| } |
| return err; |
| } |
| |
| /* |
| * Detects the endpoints and ports of Yamaha devices. |
| */ |
| static int snd_usbmidi_detect_yamaha(snd_usb_midi_t* umidi, |
| snd_usb_midi_endpoint_info_t* endpoint) |
| { |
| struct usb_interface* intf; |
| struct usb_host_interface *hostif; |
| struct usb_interface_descriptor* intfd; |
| uint8_t* cs_desc; |
| |
| intf = umidi->iface; |
| if (!intf) |
| return -ENOENT; |
| hostif = intf->altsetting; |
| intfd = get_iface_desc(hostif); |
| if (intfd->bNumEndpoints < 1) |
| return -ENOENT; |
| |
| /* |
| * For each port there is one MIDI_IN/OUT_JACK descriptor, not |
| * necessarily with any useful contents. So simply count 'em. |
| */ |
| for (cs_desc = hostif->extra; |
| cs_desc < hostif->extra + hostif->extralen && cs_desc[0] >= 2; |
| cs_desc += cs_desc[0]) { |
| if (cs_desc[1] == CS_AUDIO_INTERFACE) { |
| if (cs_desc[2] == MIDI_IN_JACK) |
| endpoint->in_cables = (endpoint->in_cables << 1) | 1; |
| else if (cs_desc[2] == MIDI_OUT_JACK) |
| endpoint->out_cables = (endpoint->out_cables << 1) | 1; |
| } |
| } |
| if (!endpoint->in_cables && !endpoint->out_cables) |
| return -ENOENT; |
| |
| return snd_usbmidi_detect_endpoints(umidi, endpoint, 1); |
| } |
| |
| /* |
| * Creates the endpoints and their ports for Midiman devices. |
| */ |
| static int snd_usbmidi_create_endpoints_midiman(snd_usb_midi_t* umidi, |
| snd_usb_midi_endpoint_info_t* endpoint) |
| { |
| snd_usb_midi_endpoint_info_t ep_info; |
| struct usb_interface* intf; |
| struct usb_host_interface *hostif; |
| struct usb_interface_descriptor* intfd; |
| struct usb_endpoint_descriptor* epd; |
| int cable, err; |
| |
| intf = umidi->iface; |
| if (!intf) |
| return -ENOENT; |
| hostif = intf->altsetting; |
| intfd = get_iface_desc(hostif); |
| /* |
| * The various MidiSport devices have more or less random endpoint |
| * numbers, so we have to identify the endpoints by their index in |
| * the descriptor array, like the driver for that other OS does. |
| * |
| * There is one interrupt input endpoint for all input ports, one |
| * bulk output endpoint for even-numbered ports, and one for odd- |
| * numbered ports. Both bulk output endpoints have corresponding |
| * input bulk endpoints (at indices 1 and 3) which aren't used. |
| */ |
| if (intfd->bNumEndpoints < (endpoint->out_cables > 0x0001 ? 5 : 3)) { |
| snd_printdd(KERN_ERR "not enough endpoints\n"); |
| return -ENOENT; |
| } |
| |
| epd = get_endpoint(hostif, 0); |
| if ((epd->bEndpointAddress & USB_ENDPOINT_DIR_MASK) != USB_DIR_IN || |
| (epd->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) != USB_ENDPOINT_XFER_INT) { |
| snd_printdd(KERN_ERR "endpoint[0] isn't interrupt\n"); |
| return -ENXIO; |
| } |
| epd = get_endpoint(hostif, 2); |
| if ((epd->bEndpointAddress & USB_ENDPOINT_DIR_MASK) != USB_DIR_OUT || |
| (epd->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) != USB_ENDPOINT_XFER_BULK) { |
| snd_printdd(KERN_ERR "endpoint[2] isn't bulk output\n"); |
| return -ENXIO; |
| } |
| if (endpoint->out_cables > 0x0001) { |
| epd = get_endpoint(hostif, 4); |
| if ((epd->bEndpointAddress & USB_ENDPOINT_DIR_MASK) != USB_DIR_OUT || |
| (epd->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) != USB_ENDPOINT_XFER_BULK) { |
| snd_printdd(KERN_ERR "endpoint[4] isn't bulk output\n"); |
| return -ENXIO; |
| } |
| } |
| |
| ep_info.out_ep = get_endpoint(hostif, 2)->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK; |
| ep_info.out_cables = endpoint->out_cables & 0x5555; |
| err = snd_usbmidi_out_endpoint_create(umidi, &ep_info, &umidi->endpoints[0]); |
| if (err < 0) |
| return err; |
| |
| ep_info.in_ep = get_endpoint(hostif, 0)->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK; |
| ep_info.in_interval = get_endpoint(hostif, 0)->bInterval; |
| ep_info.in_cables = endpoint->in_cables; |
| err = snd_usbmidi_in_endpoint_create(umidi, &ep_info, &umidi->endpoints[0]); |
| if (err < 0) |
| return err; |
| |
| if (endpoint->out_cables > 0x0001) { |
| ep_info.out_ep = get_endpoint(hostif, 4)->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK; |
| ep_info.out_cables = endpoint->out_cables & 0xaaaa; |
| err = snd_usbmidi_out_endpoint_create(umidi, &ep_info, &umidi->endpoints[1]); |
| if (err < 0) |
| return err; |
| } |
| |
| for (cable = 0; cable < 0x10; ++cable) { |
| if (endpoint->out_cables & (1 << cable)) |
| snd_usbmidi_init_substream(umidi, SNDRV_RAWMIDI_STREAM_OUTPUT, cable, |
| &umidi->endpoints[cable & 1].out->ports[cable].substream); |
| if (endpoint->in_cables & (1 << cable)) |
| snd_usbmidi_init_substream(umidi, SNDRV_RAWMIDI_STREAM_INPUT, cable, |
| &umidi->endpoints[0].in->ports[cable].substream); |
| } |
| return 0; |
| } |
| |
| static int snd_usbmidi_create_rawmidi(snd_usb_midi_t* umidi, |
| int out_ports, int in_ports) |
| { |
| snd_rawmidi_t* rmidi; |
| int err; |
| |
| err = snd_rawmidi_new(umidi->chip->card, "USB MIDI", |
| umidi->chip->next_midi_device++, |
| out_ports, in_ports, &rmidi); |
| if (err < 0) |
| return err; |
| strcpy(rmidi->name, umidi->chip->card->shortname); |
| rmidi->info_flags = SNDRV_RAWMIDI_INFO_OUTPUT | |
| SNDRV_RAWMIDI_INFO_INPUT | |
| SNDRV_RAWMIDI_INFO_DUPLEX; |
| rmidi->private_data = umidi; |
| rmidi->private_free = snd_usbmidi_rawmidi_free; |
| snd_rawmidi_set_ops(rmidi, SNDRV_RAWMIDI_STREAM_OUTPUT, &snd_usbmidi_output_ops); |
| snd_rawmidi_set_ops(rmidi, SNDRV_RAWMIDI_STREAM_INPUT, &snd_usbmidi_input_ops); |
| |
| umidi->rmidi = rmidi; |
| return 0; |
| } |
| |
| /* |
| * Temporarily stop input. |
| */ |
| void snd_usbmidi_input_stop(struct list_head* p) |
| { |
| snd_usb_midi_t* umidi; |
| int i; |
| |
| umidi = list_entry(p, snd_usb_midi_t, list); |
| for (i = 0; i < MIDI_MAX_ENDPOINTS; ++i) { |
| snd_usb_midi_endpoint_t* ep = &umidi->endpoints[i]; |
| if (ep->in) |
| usb_kill_urb(ep->in->urb); |
| } |
| } |
| |
| static void snd_usbmidi_input_start_ep(snd_usb_midi_in_endpoint_t* ep) |
| { |
| if (ep) { |
| struct urb* urb = ep->urb; |
| urb->dev = ep->umidi->chip->dev; |
| snd_usbmidi_submit_urb(urb, GFP_KERNEL); |
| } |
| } |
| |
| /* |
| * Resume input after a call to snd_usbmidi_input_stop(). |
| */ |
| void snd_usbmidi_input_start(struct list_head* p) |
| { |
| snd_usb_midi_t* umidi; |
| int i; |
| |
| umidi = list_entry(p, snd_usb_midi_t, list); |
| for (i = 0; i < MIDI_MAX_ENDPOINTS; ++i) |
| snd_usbmidi_input_start_ep(umidi->endpoints[i].in); |
| } |
| |
| /* |
| * Creates and registers everything needed for a MIDI streaming interface. |
| */ |
| int snd_usb_create_midi_interface(snd_usb_audio_t* chip, |
| struct usb_interface* iface, |
| const snd_usb_audio_quirk_t* quirk) |
| { |
| snd_usb_midi_t* umidi; |
| snd_usb_midi_endpoint_info_t endpoints[MIDI_MAX_ENDPOINTS]; |
| int out_ports, in_ports; |
| int i, err; |
| |
| umidi = kzalloc(sizeof(*umidi), GFP_KERNEL); |
| if (!umidi) |
| return -ENOMEM; |
| umidi->chip = chip; |
| umidi->iface = iface; |
| umidi->quirk = quirk; |
| umidi->usb_protocol_ops = &snd_usbmidi_standard_ops; |
| init_timer(&umidi->error_timer); |
| umidi->error_timer.function = snd_usbmidi_error_timer; |
| umidi->error_timer.data = (unsigned long)umidi; |
| |
| /* detect the endpoint(s) to use */ |
| memset(endpoints, 0, sizeof(endpoints)); |
| switch (quirk ? quirk->type : QUIRK_MIDI_STANDARD_INTERFACE) { |
| case QUIRK_MIDI_STANDARD_INTERFACE: |
| err = snd_usbmidi_get_ms_info(umidi, endpoints); |
| break; |
| case QUIRK_MIDI_FIXED_ENDPOINT: |
| memcpy(&endpoints[0], quirk->data, |
| sizeof(snd_usb_midi_endpoint_info_t)); |
| err = snd_usbmidi_detect_endpoints(umidi, &endpoints[0], 1); |
| break; |
| case QUIRK_MIDI_YAMAHA: |
| err = snd_usbmidi_detect_yamaha(umidi, &endpoints[0]); |
| break; |
| case QUIRK_MIDI_MIDIMAN: |
| umidi->usb_protocol_ops = &snd_usbmidi_midiman_ops; |
| memcpy(&endpoints[0], quirk->data, |
| sizeof(snd_usb_midi_endpoint_info_t)); |
| err = 0; |
| break; |
| case QUIRK_MIDI_NOVATION: |
| umidi->usb_protocol_ops = &snd_usbmidi_novation_ops; |
| err = snd_usbmidi_detect_per_port_endpoints(umidi, endpoints); |
| break; |
| case QUIRK_MIDI_RAW: |
| umidi->usb_protocol_ops = &snd_usbmidi_raw_ops; |
| err = snd_usbmidi_detect_per_port_endpoints(umidi, endpoints); |
| break; |
| case QUIRK_MIDI_EMAGIC: |
| umidi->usb_protocol_ops = &snd_usbmidi_emagic_ops; |
| memcpy(&endpoints[0], quirk->data, |
| sizeof(snd_usb_midi_endpoint_info_t)); |
| err = snd_usbmidi_detect_endpoints(umidi, &endpoints[0], 1); |
| break; |
| case QUIRK_MIDI_MIDITECH: |
| err = snd_usbmidi_detect_per_port_endpoints(umidi, endpoints); |
| break; |
| default: |
| snd_printd(KERN_ERR "invalid quirk type %d\n", quirk->type); |
| err = -ENXIO; |
| break; |
| } |
| if (err < 0) { |
| kfree(umidi); |
| return err; |
| } |
| |
| /* create rawmidi device */ |
| out_ports = 0; |
| in_ports = 0; |
| for (i = 0; i < MIDI_MAX_ENDPOINTS; ++i) { |
| out_ports += snd_usbmidi_count_bits(endpoints[i].out_cables); |
| in_ports += snd_usbmidi_count_bits(endpoints[i].in_cables); |
| } |
| err = snd_usbmidi_create_rawmidi(umidi, out_ports, in_ports); |
| if (err < 0) { |
| kfree(umidi); |
| return err; |
| } |
| |
| /* create endpoint/port structures */ |
| if (quirk && quirk->type == QUIRK_MIDI_MIDIMAN) |
| err = snd_usbmidi_create_endpoints_midiman(umidi, &endpoints[0]); |
| else |
| err = snd_usbmidi_create_endpoints(umidi, endpoints); |
| if (err < 0) { |
| snd_usbmidi_free(umidi); |
| return err; |
| } |
| |
| list_add(&umidi->list, &umidi->chip->midi_list); |
| |
| for (i = 0; i < MIDI_MAX_ENDPOINTS; ++i) |
| snd_usbmidi_input_start_ep(umidi->endpoints[i].in); |
| return 0; |
| } |
| |
| EXPORT_SYMBOL(snd_usb_create_midi_interface); |
| EXPORT_SYMBOL(snd_usbmidi_input_stop); |
| EXPORT_SYMBOL(snd_usbmidi_input_start); |
| EXPORT_SYMBOL(snd_usbmidi_disconnect); |