| #include <net/tcp.h> |
| |
| /* The bandwidth estimator estimates the rate at which the network |
| * can currently deliver outbound data packets for this flow. At a high |
| * level, it operates by taking a delivery rate sample for each ACK. |
| * |
| * A rate sample records the rate at which the network delivered packets |
| * for this flow, calculated over the time interval between the transmission |
| * of a data packet and the acknowledgment of that packet. |
| * |
| * Specifically, over the interval between each transmit and corresponding ACK, |
| * the estimator generates a delivery rate sample. Typically it uses the rate |
| * at which packets were acknowledged. However, the approach of using only the |
| * acknowledgment rate faces a challenge under the prevalent ACK decimation or |
| * compression: packets can temporarily appear to be delivered much quicker |
| * than the bottleneck rate. Since it is physically impossible to do that in a |
| * sustained fashion, when the estimator notices that the ACK rate is faster |
| * than the transmit rate, it uses the latter: |
| * |
| * send_rate = #pkts_delivered/(last_snd_time - first_snd_time) |
| * ack_rate = #pkts_delivered/(last_ack_time - first_ack_time) |
| * bw = min(send_rate, ack_rate) |
| * |
| * Notice the estimator essentially estimates the goodput, not always the |
| * network bottleneck link rate when the sending or receiving is limited by |
| * other factors like applications or receiver window limits. The estimator |
| * deliberately avoids using the inter-packet spacing approach because that |
| * approach requires a large number of samples and sophisticated filtering. |
| * |
| * TCP flows can often be application-limited in request/response workloads. |
| * The estimator marks a bandwidth sample as application-limited if there |
| * was some moment during the sampled window of packets when there was no data |
| * ready to send in the write queue. |
| */ |
| |
| /* Snapshot the current delivery information in the skb, to generate |
| * a rate sample later when the skb is (s)acked in tcp_rate_skb_delivered(). |
| */ |
| void tcp_rate_skb_sent(struct sock *sk, struct sk_buff *skb) |
| { |
| struct tcp_sock *tp = tcp_sk(sk); |
| |
| /* In general we need to start delivery rate samples from the |
| * time we received the most recent ACK, to ensure we include |
| * the full time the network needs to deliver all in-flight |
| * packets. If there are no packets in flight yet, then we |
| * know that any ACKs after now indicate that the network was |
| * able to deliver those packets completely in the sampling |
| * interval between now and the next ACK. |
| * |
| * Note that we use packets_out instead of tcp_packets_in_flight(tp) |
| * because the latter is a guess based on RTO and loss-marking |
| * heuristics. We don't want spurious RTOs or loss markings to cause |
| * a spuriously small time interval, causing a spuriously high |
| * bandwidth estimate. |
| */ |
| if (!tp->packets_out) { |
| tp->first_tx_mstamp = skb->skb_mstamp; |
| tp->delivered_mstamp = skb->skb_mstamp; |
| } |
| |
| TCP_SKB_CB(skb)->tx.first_tx_mstamp = tp->first_tx_mstamp; |
| TCP_SKB_CB(skb)->tx.delivered_mstamp = tp->delivered_mstamp; |
| TCP_SKB_CB(skb)->tx.delivered = tp->delivered; |
| TCP_SKB_CB(skb)->tx.is_app_limited = tp->app_limited ? 1 : 0; |
| } |
| |
| /* When an skb is sacked or acked, we fill in the rate sample with the (prior) |
| * delivery information when the skb was last transmitted. |
| * |
| * If an ACK (s)acks multiple skbs (e.g., stretched-acks), this function is |
| * called multiple times. We favor the information from the most recently |
| * sent skb, i.e., the skb with the highest prior_delivered count. |
| */ |
| void tcp_rate_skb_delivered(struct sock *sk, struct sk_buff *skb, |
| struct rate_sample *rs) |
| { |
| struct tcp_sock *tp = tcp_sk(sk); |
| struct tcp_skb_cb *scb = TCP_SKB_CB(skb); |
| |
| if (!scb->tx.delivered_mstamp.v64) |
| return; |
| |
| if (!rs->prior_delivered || |
| after(scb->tx.delivered, rs->prior_delivered)) { |
| rs->prior_delivered = scb->tx.delivered; |
| rs->prior_mstamp = scb->tx.delivered_mstamp; |
| rs->is_app_limited = scb->tx.is_app_limited; |
| rs->is_retrans = scb->sacked & TCPCB_RETRANS; |
| |
| /* Find the duration of the "send phase" of this window: */ |
| rs->interval_us = skb_mstamp_us_delta( |
| &skb->skb_mstamp, |
| &scb->tx.first_tx_mstamp); |
| |
| /* Record send time of most recently ACKed packet: */ |
| tp->first_tx_mstamp = skb->skb_mstamp; |
| } |
| /* Mark off the skb delivered once it's sacked to avoid being |
| * used again when it's cumulatively acked. For acked packets |
| * we don't need to reset since it'll be freed soon. |
| */ |
| if (scb->sacked & TCPCB_SACKED_ACKED) |
| scb->tx.delivered_mstamp.v64 = 0; |
| } |
| |
| /* Update the connection delivery information and generate a rate sample. */ |
| void tcp_rate_gen(struct sock *sk, u32 delivered, u32 lost, |
| bool is_sack_reneg, struct skb_mstamp *now, struct rate_sample *rs) |
| { |
| struct tcp_sock *tp = tcp_sk(sk); |
| u32 snd_us, ack_us; |
| |
| /* Clear app limited if bubble is acked and gone. */ |
| if (tp->app_limited && after(tp->delivered, tp->app_limited)) |
| tp->app_limited = 0; |
| |
| /* TODO: there are multiple places throughout tcp_ack() to get |
| * current time. Refactor the code using a new "tcp_acktag_state" |
| * to carry current time, flags, stats like "tcp_sacktag_state". |
| */ |
| if (delivered) |
| tp->delivered_mstamp = *now; |
| |
| rs->acked_sacked = delivered; /* freshly ACKed or SACKed */ |
| rs->losses = lost; /* freshly marked lost */ |
| /* Return an invalid sample if no timing information is available or |
| * in recovery from loss with SACK reneging. Rate samples taken during |
| * a SACK reneging event may overestimate bw by including packets that |
| * were SACKed before the reneg. |
| */ |
| if (!rs->prior_mstamp.v64 || is_sack_reneg) { |
| rs->delivered = -1; |
| rs->interval_us = -1; |
| return; |
| } |
| rs->delivered = tp->delivered - rs->prior_delivered; |
| |
| /* Model sending data and receiving ACKs as separate pipeline phases |
| * for a window. Usually the ACK phase is longer, but with ACK |
| * compression the send phase can be longer. To be safe we use the |
| * longer phase. |
| */ |
| snd_us = rs->interval_us; /* send phase */ |
| ack_us = skb_mstamp_us_delta(now, &rs->prior_mstamp); /* ack phase */ |
| rs->interval_us = max(snd_us, ack_us); |
| |
| /* Normally we expect interval_us >= min-rtt. |
| * Note that rate may still be over-estimated when a spuriously |
| * retransmistted skb was first (s)acked because "interval_us" |
| * is under-estimated (up to an RTT). However continuously |
| * measuring the delivery rate during loss recovery is crucial |
| * for connections suffer heavy or prolonged losses. |
| */ |
| if (unlikely(rs->interval_us < tcp_min_rtt(tp))) { |
| if (!rs->is_retrans) |
| pr_debug("tcp rate: %ld %d %u %u %u\n", |
| rs->interval_us, rs->delivered, |
| inet_csk(sk)->icsk_ca_state, |
| tp->rx_opt.sack_ok, tcp_min_rtt(tp)); |
| rs->interval_us = -1; |
| return; |
| } |
| |
| /* Record the last non-app-limited or the highest app-limited bw */ |
| if (!rs->is_app_limited || |
| ((u64)rs->delivered * tp->rate_interval_us >= |
| (u64)tp->rate_delivered * rs->interval_us)) { |
| tp->rate_delivered = rs->delivered; |
| tp->rate_interval_us = rs->interval_us; |
| tp->rate_app_limited = rs->is_app_limited; |
| } |
| } |
| |
| /* If a gap is detected between sends, mark the socket application-limited. */ |
| void tcp_rate_check_app_limited(struct sock *sk) |
| { |
| struct tcp_sock *tp = tcp_sk(sk); |
| |
| if (/* We have less than one packet to send. */ |
| tp->write_seq - tp->snd_nxt < tp->mss_cache && |
| /* Nothing in sending host's qdisc queues or NIC tx queue. */ |
| sk_wmem_alloc_get(sk) < SKB_TRUESIZE(1) && |
| /* We are not limited by CWND. */ |
| tcp_packets_in_flight(tp) < tp->snd_cwnd && |
| /* All lost packets have been retransmitted. */ |
| tp->lost_out <= tp->retrans_out) |
| tp->app_limited = |
| (tp->delivered + tcp_packets_in_flight(tp)) ? : 1; |
| } |