| /* |
| * SuperH Timer Support - CMT |
| * |
| * Copyright (C) 2008 Magnus Damm |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA |
| */ |
| |
| #include <linux/init.h> |
| #include <linux/platform_device.h> |
| #include <linux/spinlock.h> |
| #include <linux/interrupt.h> |
| #include <linux/ioport.h> |
| #include <linux/io.h> |
| #include <linux/clk.h> |
| #include <linux/irq.h> |
| #include <linux/err.h> |
| #include <linux/delay.h> |
| #include <linux/clocksource.h> |
| #include <linux/clockchips.h> |
| #include <linux/sh_timer.h> |
| #include <linux/slab.h> |
| #include <linux/module.h> |
| #include <linux/pm_domain.h> |
| #include <linux/pm_runtime.h> |
| |
| struct sh_cmt_priv { |
| void __iomem *mapbase; |
| struct clk *clk; |
| unsigned long width; /* 16 or 32 bit version of hardware block */ |
| unsigned long overflow_bit; |
| unsigned long clear_bits; |
| struct irqaction irqaction; |
| struct platform_device *pdev; |
| |
| unsigned long flags; |
| unsigned long match_value; |
| unsigned long next_match_value; |
| unsigned long max_match_value; |
| unsigned long rate; |
| raw_spinlock_t lock; |
| struct clock_event_device ced; |
| struct clocksource cs; |
| unsigned long total_cycles; |
| bool cs_enabled; |
| }; |
| |
| static DEFINE_RAW_SPINLOCK(sh_cmt_lock); |
| |
| #define CMSTR -1 /* shared register */ |
| #define CMCSR 0 /* channel register */ |
| #define CMCNT 1 /* channel register */ |
| #define CMCOR 2 /* channel register */ |
| |
| static inline unsigned long sh_cmt_read(struct sh_cmt_priv *p, int reg_nr) |
| { |
| struct sh_timer_config *cfg = p->pdev->dev.platform_data; |
| void __iomem *base = p->mapbase; |
| unsigned long offs; |
| |
| if (reg_nr == CMSTR) { |
| offs = 0; |
| base -= cfg->channel_offset; |
| } else |
| offs = reg_nr; |
| |
| if (p->width == 16) |
| offs <<= 1; |
| else { |
| offs <<= 2; |
| if ((reg_nr == CMCNT) || (reg_nr == CMCOR)) |
| return ioread32(base + offs); |
| } |
| |
| return ioread16(base + offs); |
| } |
| |
| static inline void sh_cmt_write(struct sh_cmt_priv *p, int reg_nr, |
| unsigned long value) |
| { |
| struct sh_timer_config *cfg = p->pdev->dev.platform_data; |
| void __iomem *base = p->mapbase; |
| unsigned long offs; |
| |
| if (reg_nr == CMSTR) { |
| offs = 0; |
| base -= cfg->channel_offset; |
| } else |
| offs = reg_nr; |
| |
| if (p->width == 16) |
| offs <<= 1; |
| else { |
| offs <<= 2; |
| if ((reg_nr == CMCNT) || (reg_nr == CMCOR)) { |
| iowrite32(value, base + offs); |
| return; |
| } |
| } |
| |
| iowrite16(value, base + offs); |
| } |
| |
| static unsigned long sh_cmt_get_counter(struct sh_cmt_priv *p, |
| int *has_wrapped) |
| { |
| unsigned long v1, v2, v3; |
| int o1, o2; |
| |
| o1 = sh_cmt_read(p, CMCSR) & p->overflow_bit; |
| |
| /* Make sure the timer value is stable. Stolen from acpi_pm.c */ |
| do { |
| o2 = o1; |
| v1 = sh_cmt_read(p, CMCNT); |
| v2 = sh_cmt_read(p, CMCNT); |
| v3 = sh_cmt_read(p, CMCNT); |
| o1 = sh_cmt_read(p, CMCSR) & p->overflow_bit; |
| } while (unlikely((o1 != o2) || (v1 > v2 && v1 < v3) |
| || (v2 > v3 && v2 < v1) || (v3 > v1 && v3 < v2))); |
| |
| *has_wrapped = o1; |
| return v2; |
| } |
| |
| |
| static void sh_cmt_start_stop_ch(struct sh_cmt_priv *p, int start) |
| { |
| struct sh_timer_config *cfg = p->pdev->dev.platform_data; |
| unsigned long flags, value; |
| |
| /* start stop register shared by multiple timer channels */ |
| raw_spin_lock_irqsave(&sh_cmt_lock, flags); |
| value = sh_cmt_read(p, CMSTR); |
| |
| if (start) |
| value |= 1 << cfg->timer_bit; |
| else |
| value &= ~(1 << cfg->timer_bit); |
| |
| sh_cmt_write(p, CMSTR, value); |
| raw_spin_unlock_irqrestore(&sh_cmt_lock, flags); |
| } |
| |
| static int sh_cmt_enable(struct sh_cmt_priv *p, unsigned long *rate) |
| { |
| int k, ret; |
| |
| pm_runtime_get_sync(&p->pdev->dev); |
| dev_pm_syscore_device(&p->pdev->dev, true); |
| |
| /* enable clock */ |
| ret = clk_enable(p->clk); |
| if (ret) { |
| dev_err(&p->pdev->dev, "cannot enable clock\n"); |
| goto err0; |
| } |
| |
| /* make sure channel is disabled */ |
| sh_cmt_start_stop_ch(p, 0); |
| |
| /* configure channel, periodic mode and maximum timeout */ |
| if (p->width == 16) { |
| *rate = clk_get_rate(p->clk) / 512; |
| sh_cmt_write(p, CMCSR, 0x43); |
| } else { |
| *rate = clk_get_rate(p->clk) / 8; |
| sh_cmt_write(p, CMCSR, 0x01a4); |
| } |
| |
| sh_cmt_write(p, CMCOR, 0xffffffff); |
| sh_cmt_write(p, CMCNT, 0); |
| |
| /* |
| * According to the sh73a0 user's manual, as CMCNT can be operated |
| * only by the RCLK (Pseudo 32 KHz), there's one restriction on |
| * modifying CMCNT register; two RCLK cycles are necessary before |
| * this register is either read or any modification of the value |
| * it holds is reflected in the LSI's actual operation. |
| * |
| * While at it, we're supposed to clear out the CMCNT as of this |
| * moment, so make sure it's processed properly here. This will |
| * take RCLKx2 at maximum. |
| */ |
| for (k = 0; k < 100; k++) { |
| if (!sh_cmt_read(p, CMCNT)) |
| break; |
| udelay(1); |
| } |
| |
| if (sh_cmt_read(p, CMCNT)) { |
| dev_err(&p->pdev->dev, "cannot clear CMCNT\n"); |
| ret = -ETIMEDOUT; |
| goto err1; |
| } |
| |
| /* enable channel */ |
| sh_cmt_start_stop_ch(p, 1); |
| return 0; |
| err1: |
| /* stop clock */ |
| clk_disable(p->clk); |
| |
| err0: |
| return ret; |
| } |
| |
| static void sh_cmt_disable(struct sh_cmt_priv *p) |
| { |
| /* disable channel */ |
| sh_cmt_start_stop_ch(p, 0); |
| |
| /* disable interrupts in CMT block */ |
| sh_cmt_write(p, CMCSR, 0); |
| |
| /* stop clock */ |
| clk_disable(p->clk); |
| |
| dev_pm_syscore_device(&p->pdev->dev, false); |
| pm_runtime_put(&p->pdev->dev); |
| } |
| |
| /* private flags */ |
| #define FLAG_CLOCKEVENT (1 << 0) |
| #define FLAG_CLOCKSOURCE (1 << 1) |
| #define FLAG_REPROGRAM (1 << 2) |
| #define FLAG_SKIPEVENT (1 << 3) |
| #define FLAG_IRQCONTEXT (1 << 4) |
| |
| static void sh_cmt_clock_event_program_verify(struct sh_cmt_priv *p, |
| int absolute) |
| { |
| unsigned long new_match; |
| unsigned long value = p->next_match_value; |
| unsigned long delay = 0; |
| unsigned long now = 0; |
| int has_wrapped; |
| |
| now = sh_cmt_get_counter(p, &has_wrapped); |
| p->flags |= FLAG_REPROGRAM; /* force reprogram */ |
| |
| if (has_wrapped) { |
| /* we're competing with the interrupt handler. |
| * -> let the interrupt handler reprogram the timer. |
| * -> interrupt number two handles the event. |
| */ |
| p->flags |= FLAG_SKIPEVENT; |
| return; |
| } |
| |
| if (absolute) |
| now = 0; |
| |
| do { |
| /* reprogram the timer hardware, |
| * but don't save the new match value yet. |
| */ |
| new_match = now + value + delay; |
| if (new_match > p->max_match_value) |
| new_match = p->max_match_value; |
| |
| sh_cmt_write(p, CMCOR, new_match); |
| |
| now = sh_cmt_get_counter(p, &has_wrapped); |
| if (has_wrapped && (new_match > p->match_value)) { |
| /* we are changing to a greater match value, |
| * so this wrap must be caused by the counter |
| * matching the old value. |
| * -> first interrupt reprograms the timer. |
| * -> interrupt number two handles the event. |
| */ |
| p->flags |= FLAG_SKIPEVENT; |
| break; |
| } |
| |
| if (has_wrapped) { |
| /* we are changing to a smaller match value, |
| * so the wrap must be caused by the counter |
| * matching the new value. |
| * -> save programmed match value. |
| * -> let isr handle the event. |
| */ |
| p->match_value = new_match; |
| break; |
| } |
| |
| /* be safe: verify hardware settings */ |
| if (now < new_match) { |
| /* timer value is below match value, all good. |
| * this makes sure we won't miss any match events. |
| * -> save programmed match value. |
| * -> let isr handle the event. |
| */ |
| p->match_value = new_match; |
| break; |
| } |
| |
| /* the counter has reached a value greater |
| * than our new match value. and since the |
| * has_wrapped flag isn't set we must have |
| * programmed a too close event. |
| * -> increase delay and retry. |
| */ |
| if (delay) |
| delay <<= 1; |
| else |
| delay = 1; |
| |
| if (!delay) |
| dev_warn(&p->pdev->dev, "too long delay\n"); |
| |
| } while (delay); |
| } |
| |
| static void __sh_cmt_set_next(struct sh_cmt_priv *p, unsigned long delta) |
| { |
| if (delta > p->max_match_value) |
| dev_warn(&p->pdev->dev, "delta out of range\n"); |
| |
| p->next_match_value = delta; |
| sh_cmt_clock_event_program_verify(p, 0); |
| } |
| |
| static void sh_cmt_set_next(struct sh_cmt_priv *p, unsigned long delta) |
| { |
| unsigned long flags; |
| |
| raw_spin_lock_irqsave(&p->lock, flags); |
| __sh_cmt_set_next(p, delta); |
| raw_spin_unlock_irqrestore(&p->lock, flags); |
| } |
| |
| static irqreturn_t sh_cmt_interrupt(int irq, void *dev_id) |
| { |
| struct sh_cmt_priv *p = dev_id; |
| |
| /* clear flags */ |
| sh_cmt_write(p, CMCSR, sh_cmt_read(p, CMCSR) & p->clear_bits); |
| |
| /* update clock source counter to begin with if enabled |
| * the wrap flag should be cleared by the timer specific |
| * isr before we end up here. |
| */ |
| if (p->flags & FLAG_CLOCKSOURCE) |
| p->total_cycles += p->match_value + 1; |
| |
| if (!(p->flags & FLAG_REPROGRAM)) |
| p->next_match_value = p->max_match_value; |
| |
| p->flags |= FLAG_IRQCONTEXT; |
| |
| if (p->flags & FLAG_CLOCKEVENT) { |
| if (!(p->flags & FLAG_SKIPEVENT)) { |
| if (p->ced.mode == CLOCK_EVT_MODE_ONESHOT) { |
| p->next_match_value = p->max_match_value; |
| p->flags |= FLAG_REPROGRAM; |
| } |
| |
| p->ced.event_handler(&p->ced); |
| } |
| } |
| |
| p->flags &= ~FLAG_SKIPEVENT; |
| |
| if (p->flags & FLAG_REPROGRAM) { |
| p->flags &= ~FLAG_REPROGRAM; |
| sh_cmt_clock_event_program_verify(p, 1); |
| |
| if (p->flags & FLAG_CLOCKEVENT) |
| if ((p->ced.mode == CLOCK_EVT_MODE_SHUTDOWN) |
| || (p->match_value == p->next_match_value)) |
| p->flags &= ~FLAG_REPROGRAM; |
| } |
| |
| p->flags &= ~FLAG_IRQCONTEXT; |
| |
| return IRQ_HANDLED; |
| } |
| |
| static int sh_cmt_start(struct sh_cmt_priv *p, unsigned long flag) |
| { |
| int ret = 0; |
| unsigned long flags; |
| |
| raw_spin_lock_irqsave(&p->lock, flags); |
| |
| if (!(p->flags & (FLAG_CLOCKEVENT | FLAG_CLOCKSOURCE))) |
| ret = sh_cmt_enable(p, &p->rate); |
| |
| if (ret) |
| goto out; |
| p->flags |= flag; |
| |
| /* setup timeout if no clockevent */ |
| if ((flag == FLAG_CLOCKSOURCE) && (!(p->flags & FLAG_CLOCKEVENT))) |
| __sh_cmt_set_next(p, p->max_match_value); |
| out: |
| raw_spin_unlock_irqrestore(&p->lock, flags); |
| |
| return ret; |
| } |
| |
| static void sh_cmt_stop(struct sh_cmt_priv *p, unsigned long flag) |
| { |
| unsigned long flags; |
| unsigned long f; |
| |
| raw_spin_lock_irqsave(&p->lock, flags); |
| |
| f = p->flags & (FLAG_CLOCKEVENT | FLAG_CLOCKSOURCE); |
| p->flags &= ~flag; |
| |
| if (f && !(p->flags & (FLAG_CLOCKEVENT | FLAG_CLOCKSOURCE))) |
| sh_cmt_disable(p); |
| |
| /* adjust the timeout to maximum if only clocksource left */ |
| if ((flag == FLAG_CLOCKEVENT) && (p->flags & FLAG_CLOCKSOURCE)) |
| __sh_cmt_set_next(p, p->max_match_value); |
| |
| raw_spin_unlock_irqrestore(&p->lock, flags); |
| } |
| |
| static struct sh_cmt_priv *cs_to_sh_cmt(struct clocksource *cs) |
| { |
| return container_of(cs, struct sh_cmt_priv, cs); |
| } |
| |
| static cycle_t sh_cmt_clocksource_read(struct clocksource *cs) |
| { |
| struct sh_cmt_priv *p = cs_to_sh_cmt(cs); |
| unsigned long flags, raw; |
| unsigned long value; |
| int has_wrapped; |
| |
| raw_spin_lock_irqsave(&p->lock, flags); |
| value = p->total_cycles; |
| raw = sh_cmt_get_counter(p, &has_wrapped); |
| |
| if (unlikely(has_wrapped)) |
| raw += p->match_value + 1; |
| raw_spin_unlock_irqrestore(&p->lock, flags); |
| |
| return value + raw; |
| } |
| |
| static int sh_cmt_clocksource_enable(struct clocksource *cs) |
| { |
| int ret; |
| struct sh_cmt_priv *p = cs_to_sh_cmt(cs); |
| |
| WARN_ON(p->cs_enabled); |
| |
| p->total_cycles = 0; |
| |
| ret = sh_cmt_start(p, FLAG_CLOCKSOURCE); |
| if (!ret) { |
| __clocksource_updatefreq_hz(cs, p->rate); |
| p->cs_enabled = true; |
| } |
| return ret; |
| } |
| |
| static void sh_cmt_clocksource_disable(struct clocksource *cs) |
| { |
| struct sh_cmt_priv *p = cs_to_sh_cmt(cs); |
| |
| WARN_ON(!p->cs_enabled); |
| |
| sh_cmt_stop(p, FLAG_CLOCKSOURCE); |
| p->cs_enabled = false; |
| } |
| |
| static void sh_cmt_clocksource_suspend(struct clocksource *cs) |
| { |
| struct sh_cmt_priv *p = cs_to_sh_cmt(cs); |
| |
| sh_cmt_stop(p, FLAG_CLOCKSOURCE); |
| pm_genpd_syscore_poweroff(&p->pdev->dev); |
| } |
| |
| static void sh_cmt_clocksource_resume(struct clocksource *cs) |
| { |
| struct sh_cmt_priv *p = cs_to_sh_cmt(cs); |
| |
| pm_genpd_syscore_poweron(&p->pdev->dev); |
| sh_cmt_start(p, FLAG_CLOCKSOURCE); |
| } |
| |
| static int sh_cmt_register_clocksource(struct sh_cmt_priv *p, |
| char *name, unsigned long rating) |
| { |
| struct clocksource *cs = &p->cs; |
| |
| cs->name = name; |
| cs->rating = rating; |
| cs->read = sh_cmt_clocksource_read; |
| cs->enable = sh_cmt_clocksource_enable; |
| cs->disable = sh_cmt_clocksource_disable; |
| cs->suspend = sh_cmt_clocksource_suspend; |
| cs->resume = sh_cmt_clocksource_resume; |
| cs->mask = CLOCKSOURCE_MASK(sizeof(unsigned long) * 8); |
| cs->flags = CLOCK_SOURCE_IS_CONTINUOUS; |
| |
| dev_info(&p->pdev->dev, "used as clock source\n"); |
| |
| /* Register with dummy 1 Hz value, gets updated in ->enable() */ |
| clocksource_register_hz(cs, 1); |
| return 0; |
| } |
| |
| static struct sh_cmt_priv *ced_to_sh_cmt(struct clock_event_device *ced) |
| { |
| return container_of(ced, struct sh_cmt_priv, ced); |
| } |
| |
| static void sh_cmt_clock_event_start(struct sh_cmt_priv *p, int periodic) |
| { |
| struct clock_event_device *ced = &p->ced; |
| |
| sh_cmt_start(p, FLAG_CLOCKEVENT); |
| |
| /* TODO: calculate good shift from rate and counter bit width */ |
| |
| ced->shift = 32; |
| ced->mult = div_sc(p->rate, NSEC_PER_SEC, ced->shift); |
| ced->max_delta_ns = clockevent_delta2ns(p->max_match_value, ced); |
| ced->min_delta_ns = clockevent_delta2ns(0x1f, ced); |
| |
| if (periodic) |
| sh_cmt_set_next(p, ((p->rate + HZ/2) / HZ) - 1); |
| else |
| sh_cmt_set_next(p, p->max_match_value); |
| } |
| |
| static void sh_cmt_clock_event_mode(enum clock_event_mode mode, |
| struct clock_event_device *ced) |
| { |
| struct sh_cmt_priv *p = ced_to_sh_cmt(ced); |
| |
| /* deal with old setting first */ |
| switch (ced->mode) { |
| case CLOCK_EVT_MODE_PERIODIC: |
| case CLOCK_EVT_MODE_ONESHOT: |
| sh_cmt_stop(p, FLAG_CLOCKEVENT); |
| break; |
| default: |
| break; |
| } |
| |
| switch (mode) { |
| case CLOCK_EVT_MODE_PERIODIC: |
| dev_info(&p->pdev->dev, "used for periodic clock events\n"); |
| sh_cmt_clock_event_start(p, 1); |
| break; |
| case CLOCK_EVT_MODE_ONESHOT: |
| dev_info(&p->pdev->dev, "used for oneshot clock events\n"); |
| sh_cmt_clock_event_start(p, 0); |
| break; |
| case CLOCK_EVT_MODE_SHUTDOWN: |
| case CLOCK_EVT_MODE_UNUSED: |
| sh_cmt_stop(p, FLAG_CLOCKEVENT); |
| break; |
| default: |
| break; |
| } |
| } |
| |
| static int sh_cmt_clock_event_next(unsigned long delta, |
| struct clock_event_device *ced) |
| { |
| struct sh_cmt_priv *p = ced_to_sh_cmt(ced); |
| |
| BUG_ON(ced->mode != CLOCK_EVT_MODE_ONESHOT); |
| if (likely(p->flags & FLAG_IRQCONTEXT)) |
| p->next_match_value = delta - 1; |
| else |
| sh_cmt_set_next(p, delta - 1); |
| |
| return 0; |
| } |
| |
| static void sh_cmt_clock_event_suspend(struct clock_event_device *ced) |
| { |
| pm_genpd_syscore_poweroff(&ced_to_sh_cmt(ced)->pdev->dev); |
| } |
| |
| static void sh_cmt_clock_event_resume(struct clock_event_device *ced) |
| { |
| pm_genpd_syscore_poweron(&ced_to_sh_cmt(ced)->pdev->dev); |
| } |
| |
| static void sh_cmt_register_clockevent(struct sh_cmt_priv *p, |
| char *name, unsigned long rating) |
| { |
| struct clock_event_device *ced = &p->ced; |
| |
| memset(ced, 0, sizeof(*ced)); |
| |
| ced->name = name; |
| ced->features = CLOCK_EVT_FEAT_PERIODIC; |
| ced->features |= CLOCK_EVT_FEAT_ONESHOT; |
| ced->rating = rating; |
| ced->cpumask = cpumask_of(0); |
| ced->set_next_event = sh_cmt_clock_event_next; |
| ced->set_mode = sh_cmt_clock_event_mode; |
| ced->suspend = sh_cmt_clock_event_suspend; |
| ced->resume = sh_cmt_clock_event_resume; |
| |
| dev_info(&p->pdev->dev, "used for clock events\n"); |
| clockevents_register_device(ced); |
| } |
| |
| static int sh_cmt_register(struct sh_cmt_priv *p, char *name, |
| unsigned long clockevent_rating, |
| unsigned long clocksource_rating) |
| { |
| if (p->width == (sizeof(p->max_match_value) * 8)) |
| p->max_match_value = ~0; |
| else |
| p->max_match_value = (1 << p->width) - 1; |
| |
| p->match_value = p->max_match_value; |
| raw_spin_lock_init(&p->lock); |
| |
| if (clockevent_rating) |
| sh_cmt_register_clockevent(p, name, clockevent_rating); |
| |
| if (clocksource_rating) |
| sh_cmt_register_clocksource(p, name, clocksource_rating); |
| |
| return 0; |
| } |
| |
| static int sh_cmt_setup(struct sh_cmt_priv *p, struct platform_device *pdev) |
| { |
| struct sh_timer_config *cfg = pdev->dev.platform_data; |
| struct resource *res; |
| int irq, ret; |
| ret = -ENXIO; |
| |
| memset(p, 0, sizeof(*p)); |
| p->pdev = pdev; |
| |
| if (!cfg) { |
| dev_err(&p->pdev->dev, "missing platform data\n"); |
| goto err0; |
| } |
| |
| platform_set_drvdata(pdev, p); |
| |
| res = platform_get_resource(p->pdev, IORESOURCE_MEM, 0); |
| if (!res) { |
| dev_err(&p->pdev->dev, "failed to get I/O memory\n"); |
| goto err0; |
| } |
| |
| irq = platform_get_irq(p->pdev, 0); |
| if (irq < 0) { |
| dev_err(&p->pdev->dev, "failed to get irq\n"); |
| goto err0; |
| } |
| |
| /* map memory, let mapbase point to our channel */ |
| p->mapbase = ioremap_nocache(res->start, resource_size(res)); |
| if (p->mapbase == NULL) { |
| dev_err(&p->pdev->dev, "failed to remap I/O memory\n"); |
| goto err0; |
| } |
| |
| /* request irq using setup_irq() (too early for request_irq()) */ |
| p->irqaction.name = dev_name(&p->pdev->dev); |
| p->irqaction.handler = sh_cmt_interrupt; |
| p->irqaction.dev_id = p; |
| p->irqaction.flags = IRQF_DISABLED | IRQF_TIMER | \ |
| IRQF_IRQPOLL | IRQF_NOBALANCING; |
| |
| /* get hold of clock */ |
| p->clk = clk_get(&p->pdev->dev, "cmt_fck"); |
| if (IS_ERR(p->clk)) { |
| dev_err(&p->pdev->dev, "cannot get clock\n"); |
| ret = PTR_ERR(p->clk); |
| goto err1; |
| } |
| |
| if (resource_size(res) == 6) { |
| p->width = 16; |
| p->overflow_bit = 0x80; |
| p->clear_bits = ~0x80; |
| } else { |
| p->width = 32; |
| p->overflow_bit = 0x8000; |
| p->clear_bits = ~0xc000; |
| } |
| |
| ret = sh_cmt_register(p, (char *)dev_name(&p->pdev->dev), |
| cfg->clockevent_rating, |
| cfg->clocksource_rating); |
| if (ret) { |
| dev_err(&p->pdev->dev, "registration failed\n"); |
| goto err1; |
| } |
| p->cs_enabled = false; |
| |
| ret = setup_irq(irq, &p->irqaction); |
| if (ret) { |
| dev_err(&p->pdev->dev, "failed to request irq %d\n", irq); |
| goto err1; |
| } |
| |
| return 0; |
| |
| err1: |
| iounmap(p->mapbase); |
| err0: |
| return ret; |
| } |
| |
| static int sh_cmt_probe(struct platform_device *pdev) |
| { |
| struct sh_cmt_priv *p = platform_get_drvdata(pdev); |
| struct sh_timer_config *cfg = pdev->dev.platform_data; |
| int ret; |
| |
| if (!is_early_platform_device(pdev)) { |
| pm_runtime_set_active(&pdev->dev); |
| pm_runtime_enable(&pdev->dev); |
| } |
| |
| if (p) { |
| dev_info(&pdev->dev, "kept as earlytimer\n"); |
| goto out; |
| } |
| |
| p = kmalloc(sizeof(*p), GFP_KERNEL); |
| if (p == NULL) { |
| dev_err(&pdev->dev, "failed to allocate driver data\n"); |
| return -ENOMEM; |
| } |
| |
| ret = sh_cmt_setup(p, pdev); |
| if (ret) { |
| kfree(p); |
| platform_set_drvdata(pdev, NULL); |
| pm_runtime_idle(&pdev->dev); |
| return ret; |
| } |
| if (is_early_platform_device(pdev)) |
| return 0; |
| |
| out: |
| if (cfg->clockevent_rating || cfg->clocksource_rating) |
| pm_runtime_irq_safe(&pdev->dev); |
| else |
| pm_runtime_idle(&pdev->dev); |
| |
| return 0; |
| } |
| |
| static int sh_cmt_remove(struct platform_device *pdev) |
| { |
| return -EBUSY; /* cannot unregister clockevent and clocksource */ |
| } |
| |
| static struct platform_driver sh_cmt_device_driver = { |
| .probe = sh_cmt_probe, |
| .remove = sh_cmt_remove, |
| .driver = { |
| .name = "sh_cmt", |
| } |
| }; |
| |
| static int __init sh_cmt_init(void) |
| { |
| return platform_driver_register(&sh_cmt_device_driver); |
| } |
| |
| static void __exit sh_cmt_exit(void) |
| { |
| platform_driver_unregister(&sh_cmt_device_driver); |
| } |
| |
| early_platform_init("earlytimer", &sh_cmt_device_driver); |
| module_init(sh_cmt_init); |
| module_exit(sh_cmt_exit); |
| |
| MODULE_AUTHOR("Magnus Damm"); |
| MODULE_DESCRIPTION("SuperH CMT Timer Driver"); |
| MODULE_LICENSE("GPL v2"); |