| /* |
| * Copyright (C) 2011 Paul Parsons <lost.distance@yahoo.com> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/init.h> |
| #include <linux/platform_device.h> |
| #include <linux/leds.h> |
| #include <linux/slab.h> |
| |
| #include <linux/mfd/asic3.h> |
| #include <linux/mfd/core.h> |
| |
| /* |
| * The HTC ASIC3 LED GPIOs are inputs, not outputs. |
| * Hence we turn the LEDs on/off via the TimeBase register. |
| */ |
| |
| /* |
| * When TimeBase is 4 the clock resolution is about 32Hz. |
| * This driver supports hardware blinking with an on+off |
| * period from 62ms (2 clocks) to 125s (4000 clocks). |
| */ |
| #define MS_TO_CLK(ms) DIV_ROUND_CLOSEST(((ms)*1024), 32000) |
| #define CLK_TO_MS(clk) (((clk)*32000)/1024) |
| #define MAX_CLK 4000 /* Fits into 12-bit Time registers */ |
| #define MAX_MS CLK_TO_MS(MAX_CLK) |
| |
| static const unsigned int led_n_base[ASIC3_NUM_LEDS] = { |
| [0] = ASIC3_LED_0_Base, |
| [1] = ASIC3_LED_1_Base, |
| [2] = ASIC3_LED_2_Base, |
| }; |
| |
| static void brightness_set(struct led_classdev *cdev, |
| enum led_brightness value) |
| { |
| struct platform_device *pdev = to_platform_device(cdev->dev->parent); |
| const struct mfd_cell *cell = mfd_get_cell(pdev); |
| struct asic3 *asic = dev_get_drvdata(pdev->dev.parent); |
| u32 timebase; |
| unsigned int base; |
| |
| timebase = (value == LED_OFF) ? 0 : (LED_EN|0x4); |
| |
| base = led_n_base[cell->id]; |
| asic3_write_register(asic, (base + ASIC3_LED_PeriodTime), 32); |
| asic3_write_register(asic, (base + ASIC3_LED_DutyTime), 32); |
| asic3_write_register(asic, (base + ASIC3_LED_AutoStopCount), 0); |
| asic3_write_register(asic, (base + ASIC3_LED_TimeBase), timebase); |
| } |
| |
| static int blink_set(struct led_classdev *cdev, |
| unsigned long *delay_on, |
| unsigned long *delay_off) |
| { |
| struct platform_device *pdev = to_platform_device(cdev->dev->parent); |
| const struct mfd_cell *cell = mfd_get_cell(pdev); |
| struct asic3 *asic = dev_get_drvdata(pdev->dev.parent); |
| u32 on; |
| u32 off; |
| unsigned int base; |
| |
| if (*delay_on > MAX_MS || *delay_off > MAX_MS) |
| return -EINVAL; |
| |
| if (*delay_on == 0 && *delay_off == 0) { |
| /* If both are zero then a sensible default should be chosen */ |
| on = MS_TO_CLK(500); |
| off = MS_TO_CLK(500); |
| } else { |
| on = MS_TO_CLK(*delay_on); |
| off = MS_TO_CLK(*delay_off); |
| if ((on + off) > MAX_CLK) |
| return -EINVAL; |
| } |
| |
| base = led_n_base[cell->id]; |
| asic3_write_register(asic, (base + ASIC3_LED_PeriodTime), (on + off)); |
| asic3_write_register(asic, (base + ASIC3_LED_DutyTime), on); |
| asic3_write_register(asic, (base + ASIC3_LED_AutoStopCount), 0); |
| asic3_write_register(asic, (base + ASIC3_LED_TimeBase), (LED_EN|0x4)); |
| |
| *delay_on = CLK_TO_MS(on); |
| *delay_off = CLK_TO_MS(off); |
| |
| return 0; |
| } |
| |
| static int __devinit asic3_led_probe(struct platform_device *pdev) |
| { |
| struct asic3_led *led = pdev->dev.platform_data; |
| int ret; |
| |
| ret = mfd_cell_enable(pdev); |
| if (ret < 0) |
| goto ret0; |
| |
| led->cdev = kzalloc(sizeof(struct led_classdev), GFP_KERNEL); |
| if (!led->cdev) { |
| ret = -ENOMEM; |
| goto ret1; |
| } |
| |
| led->cdev->name = led->name; |
| led->cdev->flags = LED_CORE_SUSPENDRESUME; |
| led->cdev->brightness_set = brightness_set; |
| led->cdev->blink_set = blink_set; |
| led->cdev->default_trigger = led->default_trigger; |
| |
| ret = led_classdev_register(&pdev->dev, led->cdev); |
| if (ret < 0) |
| goto ret2; |
| |
| return 0; |
| |
| ret2: |
| kfree(led->cdev); |
| ret1: |
| (void) mfd_cell_disable(pdev); |
| ret0: |
| return ret; |
| } |
| |
| static int __devexit asic3_led_remove(struct platform_device *pdev) |
| { |
| struct asic3_led *led = pdev->dev.platform_data; |
| |
| led_classdev_unregister(led->cdev); |
| |
| kfree(led->cdev); |
| |
| return mfd_cell_disable(pdev); |
| } |
| |
| static int asic3_led_suspend(struct device *dev) |
| { |
| struct platform_device *pdev = to_platform_device(dev); |
| const struct mfd_cell *cell = mfd_get_cell(pdev); |
| int ret; |
| |
| ret = 0; |
| if (cell->suspend) |
| ret = (*cell->suspend)(pdev); |
| |
| return ret; |
| } |
| |
| static int asic3_led_resume(struct device *dev) |
| { |
| struct platform_device *pdev = to_platform_device(dev); |
| const struct mfd_cell *cell = mfd_get_cell(pdev); |
| int ret; |
| |
| ret = 0; |
| if (cell->resume) |
| ret = (*cell->resume)(pdev); |
| |
| return ret; |
| } |
| |
| static const struct dev_pm_ops asic3_led_pm_ops = { |
| .suspend = asic3_led_suspend, |
| .resume = asic3_led_resume, |
| }; |
| |
| static struct platform_driver asic3_led_driver = { |
| .probe = asic3_led_probe, |
| .remove = __devexit_p(asic3_led_remove), |
| .driver = { |
| .name = "leds-asic3", |
| .owner = THIS_MODULE, |
| .pm = &asic3_led_pm_ops, |
| }, |
| }; |
| |
| MODULE_ALIAS("platform:leds-asic3"); |
| |
| static int __init asic3_led_init(void) |
| { |
| return platform_driver_register(&asic3_led_driver); |
| } |
| |
| static void __exit asic3_led_exit(void) |
| { |
| platform_driver_unregister(&asic3_led_driver); |
| } |
| |
| module_init(asic3_led_init); |
| module_exit(asic3_led_exit); |
| |
| MODULE_AUTHOR("Paul Parsons <lost.distance@yahoo.com>"); |
| MODULE_DESCRIPTION("HTC ASIC3 LED driver"); |
| MODULE_LICENSE("GPL"); |