| /* |
| * Copyright (C) 2004 Matthew Wilcox <matthew@wil.cx> |
| * Copyright (C) 2004 Intel Corp. |
| * |
| * This code is released under the GNU General Public License version 2. |
| */ |
| |
| /* |
| * mmconfig.c - Low-level direct PCI config space access via MMCONFIG |
| */ |
| |
| #include <linux/pci.h> |
| #include <linux/init.h> |
| #include <linux/acpi.h> |
| #include <asm/e820.h> |
| #include "pci.h" |
| |
| /* Assume systems with more busses have correct MCFG */ |
| #define mmcfg_virt_addr ((void __iomem *) fix_to_virt(FIX_PCIE_MCFG)) |
| |
| /* The base address of the last MMCONFIG device accessed */ |
| static u32 mmcfg_last_accessed_device; |
| static int mmcfg_last_accessed_cpu; |
| |
| /* |
| * Functions for accessing PCI configuration space with MMCONFIG accesses |
| */ |
| static u32 get_base_addr(unsigned int seg, int bus, unsigned devfn) |
| { |
| struct acpi_mcfg_allocation *cfg; |
| int cfg_num; |
| |
| if (seg == 0 && bus < PCI_MMCFG_MAX_CHECK_BUS && |
| test_bit(PCI_SLOT(devfn) + 32*bus, pci_mmcfg_fallback_slots)) |
| return 0; |
| |
| for (cfg_num = 0; cfg_num < pci_mmcfg_config_num; cfg_num++) { |
| cfg = &pci_mmcfg_config[cfg_num]; |
| if (cfg->pci_segment == seg && |
| (cfg->start_bus_number <= bus) && |
| (cfg->end_bus_number >= bus)) |
| return cfg->address; |
| } |
| |
| /* Fall back to type 0 */ |
| return 0; |
| } |
| |
| /* |
| * This is always called under pci_config_lock |
| */ |
| static void pci_exp_set_dev_base(unsigned int base, int bus, int devfn) |
| { |
| u32 dev_base = base | (bus << 20) | (devfn << 12); |
| int cpu = smp_processor_id(); |
| if (dev_base != mmcfg_last_accessed_device || |
| cpu != mmcfg_last_accessed_cpu) { |
| mmcfg_last_accessed_device = dev_base; |
| mmcfg_last_accessed_cpu = cpu; |
| set_fixmap_nocache(FIX_PCIE_MCFG, dev_base); |
| } |
| } |
| |
| static int pci_mmcfg_read(unsigned int seg, unsigned int bus, |
| unsigned int devfn, int reg, int len, u32 *value) |
| { |
| unsigned long flags; |
| u32 base; |
| |
| if ((bus > 255) || (devfn > 255) || (reg > 4095)) { |
| *value = -1; |
| return -EINVAL; |
| } |
| |
| base = get_base_addr(seg, bus, devfn); |
| if (!base) |
| return pci_conf1_read(seg,bus,devfn,reg,len,value); |
| |
| spin_lock_irqsave(&pci_config_lock, flags); |
| |
| pci_exp_set_dev_base(base, bus, devfn); |
| |
| switch (len) { |
| case 1: |
| *value = mmio_config_readb(mmcfg_virt_addr + reg); |
| break; |
| case 2: |
| *value = mmio_config_readw(mmcfg_virt_addr + reg); |
| break; |
| case 4: |
| *value = mmio_config_readl(mmcfg_virt_addr + reg); |
| break; |
| } |
| spin_unlock_irqrestore(&pci_config_lock, flags); |
| |
| return 0; |
| } |
| |
| static int pci_mmcfg_write(unsigned int seg, unsigned int bus, |
| unsigned int devfn, int reg, int len, u32 value) |
| { |
| unsigned long flags; |
| u32 base; |
| |
| if ((bus > 255) || (devfn > 255) || (reg > 4095)) |
| return -EINVAL; |
| |
| base = get_base_addr(seg, bus, devfn); |
| if (!base) |
| return pci_conf1_write(seg,bus,devfn,reg,len,value); |
| |
| spin_lock_irqsave(&pci_config_lock, flags); |
| |
| pci_exp_set_dev_base(base, bus, devfn); |
| |
| switch (len) { |
| case 1: |
| mmio_config_writeb(mmcfg_virt_addr + reg, value); |
| break; |
| case 2: |
| mmio_config_writew(mmcfg_virt_addr + reg, value); |
| break; |
| case 4: |
| mmio_config_writel(mmcfg_virt_addr + reg, value); |
| break; |
| } |
| spin_unlock_irqrestore(&pci_config_lock, flags); |
| |
| return 0; |
| } |
| |
| static struct pci_raw_ops pci_mmcfg = { |
| .read = pci_mmcfg_read, |
| .write = pci_mmcfg_write, |
| }; |
| |
| int __init pci_mmcfg_arch_reachable(unsigned int seg, unsigned int bus, |
| unsigned int devfn) |
| { |
| return get_base_addr(seg, bus, devfn) != 0; |
| } |
| |
| int __init pci_mmcfg_arch_init(void) |
| { |
| printk(KERN_INFO "PCI: Using MMCONFIG\n"); |
| raw_pci_ops = &pci_mmcfg; |
| return 1; |
| } |