| /* |
| * i2c tv tuner chip device driver |
| * controls all those simple 4-control-bytes style tuners. |
| * |
| * This "tuner-simple" module was split apart from the original "tuner" module. |
| */ |
| #include <linux/delay.h> |
| #include <linux/i2c.h> |
| #include <linux/videodev.h> |
| #include <media/tuner.h> |
| #include <media/v4l2-common.h> |
| #include <media/tuner-types.h> |
| #include "tuner-i2c.h" |
| #include "tuner-simple.h" |
| |
| static int debug = 0; |
| module_param(debug, int, 0644); |
| MODULE_PARM_DESC(debug, "enable verbose debug messages"); |
| |
| #define PREFIX "tuner-simple" |
| |
| static int offset = 0; |
| module_param(offset, int, 0664); |
| MODULE_PARM_DESC(offset,"Allows to specify an offset for tuner"); |
| |
| /* ---------------------------------------------------------------------- */ |
| |
| /* tv standard selection for Temic 4046 FM5 |
| this value takes the low bits of control byte 2 |
| from datasheet Rev.01, Feb.00 |
| standard BG I L L2 D |
| picture IF 38.9 38.9 38.9 33.95 38.9 |
| sound 1 33.4 32.9 32.4 40.45 32.4 |
| sound 2 33.16 |
| NICAM 33.05 32.348 33.05 33.05 |
| */ |
| #define TEMIC_SET_PAL_I 0x05 |
| #define TEMIC_SET_PAL_DK 0x09 |
| #define TEMIC_SET_PAL_L 0x0a // SECAM ? |
| #define TEMIC_SET_PAL_L2 0x0b // change IF ! |
| #define TEMIC_SET_PAL_BG 0x0c |
| |
| /* tv tuner system standard selection for Philips FQ1216ME |
| this value takes the low bits of control byte 2 |
| from datasheet "1999 Nov 16" (supersedes "1999 Mar 23") |
| standard BG DK I L L` |
| picture carrier 38.90 38.90 38.90 38.90 33.95 |
| colour 34.47 34.47 34.47 34.47 38.38 |
| sound 1 33.40 32.40 32.90 32.40 40.45 |
| sound 2 33.16 - - - - |
| NICAM 33.05 33.05 32.35 33.05 39.80 |
| */ |
| #define PHILIPS_SET_PAL_I 0x01 /* Bit 2 always zero !*/ |
| #define PHILIPS_SET_PAL_BGDK 0x09 |
| #define PHILIPS_SET_PAL_L2 0x0a |
| #define PHILIPS_SET_PAL_L 0x0b |
| |
| /* system switching for Philips FI1216MF MK2 |
| from datasheet "1996 Jul 09", |
| standard BG L L' |
| picture carrier 38.90 38.90 33.95 |
| colour 34.47 34.37 38.38 |
| sound 1 33.40 32.40 40.45 |
| sound 2 33.16 - - |
| NICAM 33.05 33.05 39.80 |
| */ |
| #define PHILIPS_MF_SET_STD_BG 0x01 /* Bit 2 must be zero, Bit 3 is system output */ |
| #define PHILIPS_MF_SET_STD_L 0x03 /* Used on Secam France */ |
| #define PHILIPS_MF_SET_STD_LC 0x02 /* Used on SECAM L' */ |
| |
| /* Control byte */ |
| |
| #define TUNER_RATIO_MASK 0x06 /* Bit cb1:cb2 */ |
| #define TUNER_RATIO_SELECT_50 0x00 |
| #define TUNER_RATIO_SELECT_32 0x02 |
| #define TUNER_RATIO_SELECT_166 0x04 |
| #define TUNER_RATIO_SELECT_62 0x06 |
| |
| #define TUNER_CHARGE_PUMP 0x40 /* Bit cb6 */ |
| |
| /* Status byte */ |
| |
| #define TUNER_POR 0x80 |
| #define TUNER_FL 0x40 |
| #define TUNER_MODE 0x38 |
| #define TUNER_AFC 0x07 |
| #define TUNER_SIGNAL 0x07 |
| #define TUNER_STEREO 0x10 |
| |
| #define TUNER_PLL_LOCKED 0x40 |
| #define TUNER_STEREO_MK3 0x04 |
| |
| struct tuner_simple_priv { |
| u16 last_div; |
| struct tuner_i2c_props i2c_props; |
| |
| unsigned int type; |
| struct tunertype *tun; |
| |
| u32 frequency; |
| }; |
| |
| /* ---------------------------------------------------------------------- */ |
| |
| static int tuner_read_status(struct dvb_frontend *fe) |
| { |
| struct tuner_simple_priv *priv = fe->tuner_priv; |
| unsigned char byte; |
| |
| if (1 != tuner_i2c_xfer_recv(&priv->i2c_props,&byte,1)) |
| return 0; |
| |
| return byte; |
| } |
| |
| static inline int tuner_signal(const int status) |
| { |
| return (status & TUNER_SIGNAL) << 13; |
| } |
| |
| static inline int tuner_stereo(const int type, const int status) |
| { |
| switch (type) { |
| case TUNER_PHILIPS_FM1216ME_MK3: |
| case TUNER_PHILIPS_FM1236_MK3: |
| case TUNER_PHILIPS_FM1256_IH3: |
| case TUNER_LG_NTSC_TAPE: |
| return ((status & TUNER_SIGNAL) == TUNER_STEREO_MK3); |
| default: |
| return status & TUNER_STEREO; |
| } |
| } |
| |
| static inline int tuner_islocked(const int status) |
| { |
| return (status & TUNER_FL); |
| } |
| |
| static inline int tuner_afcstatus(const int status) |
| { |
| return (status & TUNER_AFC) - 2; |
| } |
| |
| |
| static int simple_get_status(struct dvb_frontend *fe, u32 *status) |
| { |
| struct tuner_simple_priv *priv = fe->tuner_priv; |
| int tuner_status = tuner_read_status(fe); |
| |
| *status = 0; |
| |
| if (tuner_islocked(tuner_status)) |
| *status = TUNER_STATUS_LOCKED; |
| if (tuner_stereo(priv->type, tuner_status)) |
| *status |= TUNER_STATUS_STEREO; |
| |
| tuner_dbg("AFC Status: %d\n", tuner_afcstatus(tuner_status)); |
| |
| return 0; |
| } |
| |
| static int simple_get_rf_strength(struct dvb_frontend *fe, u16 *strength) |
| { |
| struct tuner_simple_priv *priv = fe->tuner_priv; |
| int signal = tuner_signal(tuner_read_status(fe)); |
| |
| *strength = signal; |
| |
| tuner_dbg("Signal strength: %d\n", signal); |
| |
| return 0; |
| } |
| |
| /* ---------------------------------------------------------------------- */ |
| |
| static int simple_set_tv_freq(struct dvb_frontend *fe, |
| struct analog_parameters *params) |
| { |
| struct tuner_simple_priv *priv = fe->tuner_priv; |
| u8 config, cb, tuneraddr; |
| u16 div; |
| struct tunertype *tun; |
| u8 buffer[4]; |
| int rc, IFPCoff, i, j; |
| enum param_type desired_type; |
| struct tuner_params *t_params; |
| |
| tun = priv->tun; |
| |
| /* IFPCoff = Video Intermediate Frequency - Vif: |
| 940 =16*58.75 NTSC/J (Japan) |
| 732 =16*45.75 M/N STD |
| 704 =16*44 ATSC (at DVB code) |
| 632 =16*39.50 I U.K. |
| 622.4=16*38.90 B/G D/K I, L STD |
| 592 =16*37.00 D China |
| 590 =16.36.875 B Australia |
| 543.2=16*33.95 L' STD |
| 171.2=16*10.70 FM Radio (at set_radio_freq) |
| */ |
| |
| if (params->std == V4L2_STD_NTSC_M_JP) { |
| IFPCoff = 940; |
| desired_type = TUNER_PARAM_TYPE_NTSC; |
| } else if ((params->std & V4L2_STD_MN) && |
| !(params->std & ~V4L2_STD_MN)) { |
| IFPCoff = 732; |
| desired_type = TUNER_PARAM_TYPE_NTSC; |
| } else if (params->std == V4L2_STD_SECAM_LC) { |
| IFPCoff = 543; |
| desired_type = TUNER_PARAM_TYPE_SECAM; |
| } else { |
| IFPCoff = 623; |
| desired_type = TUNER_PARAM_TYPE_PAL; |
| } |
| |
| for (j = 0; j < tun->count-1; j++) { |
| if (desired_type != tun->params[j].type) |
| continue; |
| break; |
| } |
| /* use default tuner_t_params if desired_type not available */ |
| if (desired_type != tun->params[j].type) { |
| tuner_dbg("IFPCoff = %d: tuner_t_params undefined for tuner %d\n", |
| IFPCoff, priv->type); |
| j = 0; |
| } |
| t_params = &tun->params[j]; |
| |
| for (i = 0; i < t_params->count; i++) { |
| if (params->frequency > t_params->ranges[i].limit) |
| continue; |
| break; |
| } |
| if (i == t_params->count) { |
| tuner_dbg("TV frequency out of range (%d > %d)", |
| params->frequency, t_params->ranges[i - 1].limit); |
| params->frequency = t_params->ranges[--i].limit; |
| } |
| config = t_params->ranges[i].config; |
| cb = t_params->ranges[i].cb; |
| /* i == 0 -> VHF_LO |
| * i == 1 -> VHF_HI |
| * i == 2 -> UHF */ |
| tuner_dbg("tv: param %d, range %d\n",j,i); |
| |
| div=params->frequency + IFPCoff + offset; |
| |
| tuner_dbg("Freq= %d.%02d MHz, V_IF=%d.%02d MHz, Offset=%d.%02d MHz, div=%0d\n", |
| params->frequency / 16, params->frequency % 16 * 100 / 16, |
| IFPCoff / 16, IFPCoff % 16 * 100 / 16, |
| offset / 16, offset % 16 * 100 / 16, |
| div); |
| |
| /* tv norm specific stuff for multi-norm tuners */ |
| switch (priv->type) { |
| case TUNER_PHILIPS_SECAM: // FI1216MF |
| /* 0x01 -> ??? no change ??? */ |
| /* 0x02 -> PAL BDGHI / SECAM L */ |
| /* 0x04 -> ??? PAL others / SECAM others ??? */ |
| cb &= ~0x03; |
| if (params->std & V4L2_STD_SECAM_L) //also valid for V4L2_STD_SECAM |
| cb |= PHILIPS_MF_SET_STD_L; |
| else if (params->std & V4L2_STD_SECAM_LC) |
| cb |= PHILIPS_MF_SET_STD_LC; |
| else /* V4L2_STD_B|V4L2_STD_GH */ |
| cb |= PHILIPS_MF_SET_STD_BG; |
| break; |
| |
| case TUNER_TEMIC_4046FM5: |
| cb &= ~0x0f; |
| |
| if (params->std & V4L2_STD_PAL_BG) { |
| cb |= TEMIC_SET_PAL_BG; |
| |
| } else if (params->std & V4L2_STD_PAL_I) { |
| cb |= TEMIC_SET_PAL_I; |
| |
| } else if (params->std & V4L2_STD_PAL_DK) { |
| cb |= TEMIC_SET_PAL_DK; |
| |
| } else if (params->std & V4L2_STD_SECAM_L) { |
| cb |= TEMIC_SET_PAL_L; |
| |
| } |
| break; |
| |
| case TUNER_PHILIPS_FQ1216ME: |
| cb &= ~0x0f; |
| |
| if (params->std & (V4L2_STD_PAL_BG|V4L2_STD_PAL_DK)) { |
| cb |= PHILIPS_SET_PAL_BGDK; |
| |
| } else if (params->std & V4L2_STD_PAL_I) { |
| cb |= PHILIPS_SET_PAL_I; |
| |
| } else if (params->std & V4L2_STD_SECAM_L) { |
| cb |= PHILIPS_SET_PAL_L; |
| |
| } |
| break; |
| |
| case TUNER_PHILIPS_ATSC: |
| /* 0x00 -> ATSC antenna input 1 */ |
| /* 0x01 -> ATSC antenna input 2 */ |
| /* 0x02 -> NTSC antenna input 1 */ |
| /* 0x03 -> NTSC antenna input 2 */ |
| cb &= ~0x03; |
| if (!(params->std & V4L2_STD_ATSC)) |
| cb |= 2; |
| /* FIXME: input */ |
| break; |
| |
| case TUNER_MICROTUNE_4042FI5: |
| /* Set the charge pump for fast tuning */ |
| config |= TUNER_CHARGE_PUMP; |
| break; |
| |
| case TUNER_PHILIPS_TUV1236D: |
| /* 0x40 -> ATSC antenna input 1 */ |
| /* 0x48 -> ATSC antenna input 2 */ |
| /* 0x00 -> NTSC antenna input 1 */ |
| /* 0x08 -> NTSC antenna input 2 */ |
| buffer[0] = 0x14; |
| buffer[1] = 0x00; |
| buffer[2] = 0x17; |
| buffer[3] = 0x00; |
| cb &= ~0x40; |
| if (params->std & V4L2_STD_ATSC) { |
| cb |= 0x40; |
| buffer[1] = 0x04; |
| } |
| /* set to the correct mode (analog or digital) */ |
| tuneraddr = priv->i2c_props.addr; |
| priv->i2c_props.addr = 0x0a; |
| if (2 != (rc = tuner_i2c_xfer_send(&priv->i2c_props,&buffer[0],2))) |
| tuner_warn("i2c i/o error: rc == %d (should be 2)\n",rc); |
| if (2 != (rc = tuner_i2c_xfer_send(&priv->i2c_props,&buffer[2],2))) |
| tuner_warn("i2c i/o error: rc == %d (should be 2)\n",rc); |
| priv->i2c_props.addr = tuneraddr; |
| /* FIXME: input */ |
| break; |
| } |
| |
| if (t_params->cb_first_if_lower_freq && div < priv->last_div) { |
| buffer[0] = config; |
| buffer[1] = cb; |
| buffer[2] = (div>>8) & 0x7f; |
| buffer[3] = div & 0xff; |
| } else { |
| buffer[0] = (div>>8) & 0x7f; |
| buffer[1] = div & 0xff; |
| buffer[2] = config; |
| buffer[3] = cb; |
| } |
| priv->last_div = div; |
| if (t_params->has_tda9887) { |
| struct v4l2_priv_tun_config tda9887_cfg; |
| int config = 0; |
| int is_secam_l = (params->std & (V4L2_STD_SECAM_L | V4L2_STD_SECAM_LC)) && |
| !(params->std & ~(V4L2_STD_SECAM_L | V4L2_STD_SECAM_LC)); |
| |
| tda9887_cfg.tuner = TUNER_TDA9887; |
| tda9887_cfg.priv = &config; |
| |
| if (params->std == V4L2_STD_SECAM_LC) { |
| if (t_params->port1_active ^ t_params->port1_invert_for_secam_lc) |
| config |= TDA9887_PORT1_ACTIVE; |
| if (t_params->port2_active ^ t_params->port2_invert_for_secam_lc) |
| config |= TDA9887_PORT2_ACTIVE; |
| } |
| else { |
| if (t_params->port1_active) |
| config |= TDA9887_PORT1_ACTIVE; |
| if (t_params->port2_active) |
| config |= TDA9887_PORT2_ACTIVE; |
| } |
| if (t_params->intercarrier_mode) |
| config |= TDA9887_INTERCARRIER; |
| if (is_secam_l) { |
| if (i == 0 && t_params->default_top_secam_low) |
| config |= TDA9887_TOP(t_params->default_top_secam_low); |
| else if (i == 1 && t_params->default_top_secam_mid) |
| config |= TDA9887_TOP(t_params->default_top_secam_mid); |
| else if (t_params->default_top_secam_high) |
| config |= TDA9887_TOP(t_params->default_top_secam_high); |
| } |
| else { |
| if (i == 0 && t_params->default_top_low) |
| config |= TDA9887_TOP(t_params->default_top_low); |
| else if (i == 1 && t_params->default_top_mid) |
| config |= TDA9887_TOP(t_params->default_top_mid); |
| else if (t_params->default_top_high) |
| config |= TDA9887_TOP(t_params->default_top_high); |
| } |
| if (t_params->default_pll_gating_18) |
| config |= TDA9887_GATING_18; |
| i2c_clients_command(priv->i2c_props.adap, TUNER_SET_CONFIG, |
| &tda9887_cfg); |
| } |
| tuner_dbg("tv 0x%02x 0x%02x 0x%02x 0x%02x\n", |
| buffer[0],buffer[1],buffer[2],buffer[3]); |
| |
| if (4 != (rc = tuner_i2c_xfer_send(&priv->i2c_props,buffer,4))) |
| tuner_warn("i2c i/o error: rc == %d (should be 4)\n",rc); |
| |
| switch (priv->type) { |
| case TUNER_LG_TDVS_H06XF: |
| /* Set the Auxiliary Byte. */ |
| buffer[0] = buffer[2]; |
| buffer[0] &= ~0x20; |
| buffer[0] |= 0x18; |
| buffer[1] = 0x20; |
| tuner_dbg("tv 0x%02x 0x%02x\n",buffer[0],buffer[1]); |
| |
| if (2 != (rc = tuner_i2c_xfer_send(&priv->i2c_props,buffer,2))) |
| tuner_warn("i2c i/o error: rc == %d (should be 2)\n",rc); |
| break; |
| case TUNER_MICROTUNE_4042FI5: |
| { |
| // FIXME - this may also work for other tuners |
| unsigned long timeout = jiffies + msecs_to_jiffies(1); |
| u8 status_byte = 0; |
| |
| /* Wait until the PLL locks */ |
| for (;;) { |
| if (time_after(jiffies,timeout)) |
| return 0; |
| if (1 != (rc = tuner_i2c_xfer_recv(&priv->i2c_props,&status_byte,1))) { |
| tuner_warn("i2c i/o read error: rc == %d (should be 1)\n",rc); |
| break; |
| } |
| if (status_byte & TUNER_PLL_LOCKED) |
| break; |
| udelay(10); |
| } |
| |
| /* Set the charge pump for optimized phase noise figure */ |
| config &= ~TUNER_CHARGE_PUMP; |
| buffer[0] = (div>>8) & 0x7f; |
| buffer[1] = div & 0xff; |
| buffer[2] = config; |
| buffer[3] = cb; |
| tuner_dbg("tv 0x%02x 0x%02x 0x%02x 0x%02x\n", |
| buffer[0],buffer[1],buffer[2],buffer[3]); |
| |
| if (4 != (rc = tuner_i2c_xfer_send(&priv->i2c_props,buffer,4))) |
| tuner_warn("i2c i/o error: rc == %d (should be 4)\n",rc); |
| break; |
| } |
| } |
| return 0; |
| } |
| |
| static int simple_set_radio_freq(struct dvb_frontend *fe, |
| struct analog_parameters *params) |
| { |
| struct tunertype *tun; |
| struct tuner_simple_priv *priv = fe->tuner_priv; |
| u8 buffer[4]; |
| u16 div; |
| int rc, j; |
| struct tuner_params *t_params; |
| unsigned int freq = params->frequency; |
| |
| tun = priv->tun; |
| |
| for (j = tun->count-1; j > 0; j--) |
| if (tun->params[j].type == TUNER_PARAM_TYPE_RADIO) |
| break; |
| /* default t_params (j=0) will be used if desired type wasn't found */ |
| t_params = &tun->params[j]; |
| |
| /* Select Radio 1st IF used */ |
| switch (t_params->radio_if) { |
| case 0: /* 10.7 MHz */ |
| freq += (unsigned int)(10.7*16000); |
| break; |
| case 1: /* 33.3 MHz */ |
| freq += (unsigned int)(33.3*16000); |
| break; |
| case 2: /* 41.3 MHz */ |
| freq += (unsigned int)(41.3*16000); |
| break; |
| default: |
| tuner_warn("Unsupported radio_if value %d\n", t_params->radio_if); |
| return 0; |
| } |
| |
| /* Bandswitch byte */ |
| switch (priv->type) { |
| case TUNER_TENA_9533_DI: |
| case TUNER_YMEC_TVF_5533MF: |
| tuner_dbg("This tuner doesn't have FM. Most cards have a TEA5767 for FM\n"); |
| return 0; |
| case TUNER_PHILIPS_FM1216ME_MK3: |
| case TUNER_PHILIPS_FM1236_MK3: |
| case TUNER_PHILIPS_FMD1216ME_MK3: |
| case TUNER_LG_NTSC_TAPE: |
| case TUNER_PHILIPS_FM1256_IH3: |
| buffer[3] = 0x19; |
| break; |
| case TUNER_TNF_5335MF: |
| buffer[3] = 0x11; |
| break; |
| case TUNER_LG_PAL_FM: |
| buffer[3] = 0xa5; |
| break; |
| case TUNER_THOMSON_DTT761X: |
| buffer[3] = 0x39; |
| break; |
| case TUNER_MICROTUNE_4049FM5: |
| default: |
| buffer[3] = 0xa4; |
| break; |
| } |
| |
| buffer[2] = (t_params->ranges[0].config & ~TUNER_RATIO_MASK) | |
| TUNER_RATIO_SELECT_50; /* 50 kHz step */ |
| |
| /* Convert from 1/16 kHz V4L steps to 1/20 MHz (=50 kHz) PLL steps |
| freq * (1 Mhz / 16000 V4L steps) * (20 PLL steps / 1 MHz) = |
| freq * (1/800) */ |
| div = (freq + 400) / 800; |
| |
| if (t_params->cb_first_if_lower_freq && div < priv->last_div) { |
| buffer[0] = buffer[2]; |
| buffer[1] = buffer[3]; |
| buffer[2] = (div>>8) & 0x7f; |
| buffer[3] = div & 0xff; |
| } else { |
| buffer[0] = (div>>8) & 0x7f; |
| buffer[1] = div & 0xff; |
| } |
| |
| tuner_dbg("radio 0x%02x 0x%02x 0x%02x 0x%02x\n", |
| buffer[0],buffer[1],buffer[2],buffer[3]); |
| priv->last_div = div; |
| |
| if (t_params->has_tda9887) { |
| int config = 0; |
| struct v4l2_priv_tun_config tda9887_cfg; |
| |
| tda9887_cfg.tuner = TUNER_TDA9887; |
| tda9887_cfg.priv = &config; |
| |
| if (t_params->port1_active && !t_params->port1_fm_high_sensitivity) |
| config |= TDA9887_PORT1_ACTIVE; |
| if (t_params->port2_active && !t_params->port2_fm_high_sensitivity) |
| config |= TDA9887_PORT2_ACTIVE; |
| if (t_params->intercarrier_mode) |
| config |= TDA9887_INTERCARRIER; |
| /* if (t_params->port1_set_for_fm_mono) |
| config &= ~TDA9887_PORT1_ACTIVE;*/ |
| if (t_params->fm_gain_normal) |
| config |= TDA9887_GAIN_NORMAL; |
| if (t_params->radio_if == 2) |
| config |= TDA9887_RIF_41_3; |
| i2c_clients_command(priv->i2c_props.adap, TUNER_SET_CONFIG, |
| &tda9887_cfg); |
| } |
| if (4 != (rc = tuner_i2c_xfer_send(&priv->i2c_props,buffer,4))) |
| tuner_warn("i2c i/o error: rc == %d (should be 4)\n",rc); |
| |
| return 0; |
| } |
| |
| static int simple_set_params(struct dvb_frontend *fe, |
| struct analog_parameters *params) |
| { |
| struct tuner_simple_priv *priv = fe->tuner_priv; |
| int ret = -EINVAL; |
| |
| switch (params->mode) { |
| case V4L2_TUNER_RADIO: |
| ret = simple_set_radio_freq(fe, params); |
| priv->frequency = params->frequency * 125 / 2; |
| break; |
| case V4L2_TUNER_ANALOG_TV: |
| case V4L2_TUNER_DIGITAL_TV: |
| ret = simple_set_tv_freq(fe, params); |
| priv->frequency = params->frequency * 62500; |
| break; |
| } |
| |
| return ret; |
| } |
| |
| |
| static int simple_release(struct dvb_frontend *fe) |
| { |
| kfree(fe->tuner_priv); |
| fe->tuner_priv = NULL; |
| |
| return 0; |
| } |
| |
| static int simple_get_frequency(struct dvb_frontend *fe, u32 *frequency) |
| { |
| struct tuner_simple_priv *priv = fe->tuner_priv; |
| *frequency = priv->frequency; |
| return 0; |
| } |
| |
| static struct dvb_tuner_ops simple_tuner_ops = { |
| .set_analog_params = simple_set_params, |
| .release = simple_release, |
| .get_frequency = simple_get_frequency, |
| .get_status = simple_get_status, |
| .get_rf_strength = simple_get_rf_strength, |
| }; |
| |
| struct dvb_frontend *simple_tuner_attach(struct dvb_frontend *fe, |
| struct i2c_adapter *i2c_adap, |
| u8 i2c_addr, |
| struct simple_tuner_config *cfg) |
| { |
| struct tuner_simple_priv *priv = NULL; |
| |
| priv = kzalloc(sizeof(struct tuner_simple_priv), GFP_KERNEL); |
| if (priv == NULL) |
| return NULL; |
| fe->tuner_priv = priv; |
| |
| priv->i2c_props.addr = i2c_addr; |
| priv->i2c_props.adap = i2c_adap; |
| priv->type = cfg->type; |
| priv->tun = cfg->tun; |
| |
| memcpy(&fe->ops.tuner_ops, &simple_tuner_ops, sizeof(struct dvb_tuner_ops)); |
| |
| tuner_info("type set to %d (%s)\n", cfg->type, cfg->tun->name); |
| |
| strlcpy(fe->ops.tuner_ops.info.name, cfg->tun->name, sizeof(fe->ops.tuner_ops.info.name)); |
| |
| return fe; |
| } |
| |
| |
| EXPORT_SYMBOL_GPL(simple_tuner_attach); |
| |
| MODULE_DESCRIPTION("Simple 4-control-bytes style tuner driver"); |
| MODULE_AUTHOR("Ralph Metzler, Gerd Knorr, Gunther Mayer"); |
| MODULE_LICENSE("GPL"); |
| |
| /* |
| * Overrides for Emacs so that we follow Linus's tabbing style. |
| * --------------------------------------------------------------------------- |
| * Local variables: |
| * c-basic-offset: 8 |
| * End: |
| */ |