| /* |
| * m8xx_wdt.c - MPC8xx watchdog driver |
| * |
| * Author: Florian Schirmer <jolt@tuxbox.org> |
| * |
| * 2002 (c) Florian Schirmer <jolt@tuxbox.org> This file is licensed under |
| * the terms of the GNU General Public License version 2. This program |
| * is licensed "as is" without any warranty of any kind, whether express |
| * or implied. |
| */ |
| |
| #include <linux/init.h> |
| #include <linux/interrupt.h> |
| #include <linux/irq.h> |
| #include <linux/kernel.h> |
| #include <linux/sched.h> |
| #include <asm/io.h> |
| #include <asm/8xx_immap.h> |
| #include <syslib/m8xx_wdt.h> |
| |
| static int wdt_timeout; |
| int m8xx_has_internal_rtc = 0; |
| |
| static irqreturn_t m8xx_wdt_interrupt(int, void *); |
| static struct irqaction m8xx_wdt_irqaction = { |
| .handler = m8xx_wdt_interrupt, |
| .name = "watchdog", |
| }; |
| |
| void m8xx_wdt_reset(void) |
| { |
| volatile immap_t *imap = (volatile immap_t *)IMAP_ADDR; |
| |
| out_be16(&imap->im_siu_conf.sc_swsr, 0x556c); /* write magic1 */ |
| out_be16(&imap->im_siu_conf.sc_swsr, 0xaa39); /* write magic2 */ |
| } |
| |
| static irqreturn_t m8xx_wdt_interrupt(int irq, void *dev) |
| { |
| volatile immap_t *imap = (volatile immap_t *)IMAP_ADDR; |
| |
| m8xx_wdt_reset(); |
| |
| setbits16(&imap->im_sit.sit_piscr, PISCR_PS); |
| return IRQ_HANDLED; |
| } |
| |
| #define SYPCR_SWP 0x1 |
| #define SYPCR_SWE 0x4 |
| |
| |
| void __init m8xx_wdt_install_irq(volatile immap_t *imap, bd_t *binfo) |
| { |
| u32 pitc; |
| u32 pitrtclk; |
| |
| /* |
| * Fire trigger if half of the wdt ticked down |
| */ |
| |
| if (imap->im_sit.sit_rtcsc & RTCSC_38K) |
| pitrtclk = 9600; |
| else |
| pitrtclk = 8192; |
| |
| if ((wdt_timeout) > (UINT_MAX / pitrtclk)) |
| pitc = wdt_timeout / binfo->bi_intfreq * pitrtclk / 2; |
| else |
| pitc = pitrtclk * wdt_timeout / binfo->bi_intfreq / 2; |
| |
| out_be32(&imap->im_sit.sit_pitc, pitc << 16); |
| |
| out_be16(&imap->im_sit.sit_piscr, (mk_int_int_mask(PIT_INTERRUPT) << 8) | PISCR_PIE | PISCR_PTE); |
| |
| if (setup_irq(PIT_INTERRUPT, &m8xx_wdt_irqaction)) |
| panic("m8xx_wdt: error setting up the watchdog irq!"); |
| |
| printk(KERN_NOTICE |
| "m8xx_wdt: keep-alive trigger installed (PITC: 0x%04X)\n", pitc); |
| |
| } |
| |
| static void m8xx_wdt_timer_func(unsigned long data); |
| |
| static struct timer_list m8xx_wdt_timer = |
| TIMER_INITIALIZER(m8xx_wdt_timer_func, 0, 0); |
| |
| void m8xx_wdt_stop_timer(void) |
| { |
| del_timer(&m8xx_wdt_timer); |
| } |
| |
| void m8xx_wdt_install_timer(void) |
| { |
| m8xx_wdt_timer.expires = jiffies + (HZ/2); |
| add_timer(&m8xx_wdt_timer); |
| } |
| |
| static void m8xx_wdt_timer_func(unsigned long data) |
| { |
| m8xx_wdt_reset(); |
| m8xx_wdt_install_timer(); |
| } |
| |
| void __init m8xx_wdt_handler_install(bd_t * binfo) |
| { |
| volatile immap_t *imap = (volatile immap_t *)IMAP_ADDR; |
| u32 sypcr; |
| |
| sypcr = in_be32(&imap->im_siu_conf.sc_sypcr); |
| |
| if (!(sypcr & SYPCR_SWE)) { |
| printk(KERN_NOTICE "m8xx_wdt: wdt disabled (SYPCR: 0x%08X)\n", |
| sypcr); |
| return; |
| } |
| |
| m8xx_wdt_reset(); |
| |
| printk(KERN_NOTICE |
| "m8xx_wdt: active wdt found (SWTC: 0x%04X, SWP: 0x%01X)\n", |
| (sypcr >> 16), sypcr & SYPCR_SWP); |
| |
| wdt_timeout = (sypcr >> 16) & 0xFFFF; |
| |
| if (!wdt_timeout) |
| wdt_timeout = 0xFFFF; |
| |
| if (sypcr & SYPCR_SWP) |
| wdt_timeout *= 2048; |
| |
| m8xx_has_internal_rtc = in_be16(&imap->im_sit.sit_rtcsc) & RTCSC_RTE; |
| |
| /* if the internal RTC is off use a kernel timer */ |
| if (!m8xx_has_internal_rtc) { |
| if (wdt_timeout < (binfo->bi_intfreq/HZ)) |
| printk(KERN_ERR "m8xx_wdt: timeout too short for ktimer!\n"); |
| m8xx_wdt_install_timer(); |
| } else |
| m8xx_wdt_install_irq(imap, binfo); |
| |
| wdt_timeout /= binfo->bi_intfreq; |
| } |
| |
| int m8xx_wdt_get_timeout(void) |
| { |
| return wdt_timeout; |
| } |