| /* |
| * Copyright (C) 2007-2011 ST-Ericsson |
| * License terms: GNU General Public License (GPL) version 2 |
| * Low-level core for exclusive access to the AB5500 IC on the I2C bus |
| * and some basic chip-configuration. |
| * Author: Bengt Jonsson <bengt.g.jonsson@stericsson.com> |
| * Author: Mattias Nilsson <mattias.i.nilsson@stericsson.com> |
| * Author: Mattias Wallin <mattias.wallin@stericsson.com> |
| * Author: Rickard Andersson <rickard.andersson@stericsson.com> |
| * Author: Karl Komierowski <karl.komierowski@stericsson.com> |
| * Author: Bibek Basu <bibek.basu@stericsson.com> |
| * |
| * TODO: Event handling with irq_chip. Waiting for PRCMU fw support. |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/mutex.h> |
| #include <linux/err.h> |
| #include <linux/platform_device.h> |
| #include <linux/slab.h> |
| #include <linux/device.h> |
| #include <linux/irq.h> |
| #include <linux/interrupt.h> |
| #include <linux/random.h> |
| #include <linux/mfd/abx500.h> |
| #include <linux/mfd/abx500/ab5500.h> |
| #include <linux/list.h> |
| #include <linux/bitops.h> |
| #include <linux/spinlock.h> |
| #include <linux/mfd/core.h> |
| #include <linux/version.h> |
| #include <linux/mfd/db5500-prcmu.h> |
| |
| #include "ab5500-core.h" |
| #include "ab5500-debugfs.h" |
| |
| #define AB5500_NUM_EVENT_REG 23 |
| #define AB5500_IT_LATCH0_REG 0x40 |
| #define AB5500_IT_MASK0_REG 0x60 |
| |
| /* |
| * Permissible register ranges for reading and writing per device and bank. |
| * |
| * The ranges must be listed in increasing address order, and no overlaps are |
| * allowed. It is assumed that write permission implies read permission |
| * (i.e. only RO and RW permissions should be used). Ranges with write |
| * permission must not be split up. |
| */ |
| |
| #define NO_RANGE {.count = 0, .range = NULL,} |
| static struct ab5500_i2c_banks ab5500_bank_ranges[AB5500_NUM_DEVICES] = { |
| [AB5500_DEVID_USB] = { |
| .nbanks = 1, |
| .bank = (struct ab5500_i2c_ranges []) { |
| { |
| .bankid = AB5500_BANK_USB, |
| .nranges = 12, |
| .range = (struct ab5500_reg_range[]) { |
| { |
| .first = 0x01, |
| .last = 0x01, |
| .perm = AB5500_PERM_RW, |
| }, |
| { |
| .first = 0x80, |
| .last = 0x83, |
| .perm = AB5500_PERM_RW, |
| }, |
| { |
| .first = 0x87, |
| .last = 0x8A, |
| .perm = AB5500_PERM_RW, |
| }, |
| { |
| .first = 0x8B, |
| .last = 0x8B, |
| .perm = AB5500_PERM_RO, |
| }, |
| { |
| .first = 0x91, |
| .last = 0x92, |
| .perm = AB5500_PERM_RO, |
| }, |
| { |
| .first = 0x93, |
| .last = 0x93, |
| .perm = AB5500_PERM_RW, |
| }, |
| { |
| .first = 0x94, |
| .last = 0x94, |
| .perm = AB5500_PERM_RO, |
| }, |
| { |
| .first = 0xA8, |
| .last = 0xB0, |
| .perm = AB5500_PERM_RO, |
| }, |
| { |
| .first = 0xB2, |
| .last = 0xB2, |
| .perm = AB5500_PERM_RO, |
| }, |
| { |
| .first = 0xB4, |
| .last = 0xBC, |
| .perm = AB5500_PERM_RO, |
| }, |
| { |
| .first = 0xBF, |
| .last = 0xBF, |
| .perm = AB5500_PERM_RO, |
| }, |
| { |
| .first = 0xC1, |
| .last = 0xC5, |
| .perm = AB5500_PERM_RO, |
| }, |
| }, |
| }, |
| }, |
| }, |
| [AB5500_DEVID_ADC] = { |
| .nbanks = 1, |
| .bank = (struct ab5500_i2c_ranges []) { |
| { |
| .bankid = AB5500_BANK_ADC, |
| .nranges = 6, |
| .range = (struct ab5500_reg_range[]) { |
| { |
| .first = 0x1F, |
| .last = 0x22, |
| .perm = AB5500_PERM_RO, |
| }, |
| { |
| .first = 0x23, |
| .last = 0x24, |
| .perm = AB5500_PERM_RW, |
| }, |
| { |
| .first = 0x26, |
| .last = 0x2D, |
| .perm = AB5500_PERM_RO, |
| }, |
| { |
| .first = 0x2F, |
| .last = 0x34, |
| .perm = AB5500_PERM_RW, |
| }, |
| { |
| .first = 0x37, |
| .last = 0x57, |
| .perm = AB5500_PERM_RW, |
| }, |
| { |
| .first = 0x58, |
| .last = 0x58, |
| .perm = AB5500_PERM_RO, |
| }, |
| }, |
| }, |
| }, |
| }, |
| [AB5500_DEVID_LEDS] = { |
| .nbanks = 1, |
| .bank = (struct ab5500_i2c_ranges []) { |
| { |
| .bankid = AB5500_BANK_LED, |
| .nranges = 1, |
| .range = (struct ab5500_reg_range[]) { |
| { |
| .first = 0x00, |
| .last = 0x0C, |
| .perm = AB5500_PERM_RW, |
| }, |
| }, |
| }, |
| }, |
| }, |
| [AB5500_DEVID_VIDEO] = { |
| .nbanks = 1, |
| .bank = (struct ab5500_i2c_ranges []) { |
| { |
| .bankid = AB5500_BANK_VDENC, |
| .nranges = 12, |
| .range = (struct ab5500_reg_range[]) { |
| { |
| .first = 0x00, |
| .last = 0x08, |
| .perm = AB5500_PERM_RW, |
| }, |
| { |
| .first = 0x09, |
| .last = 0x09, |
| .perm = AB5500_PERM_RO, |
| }, |
| { |
| .first = 0x0A, |
| .last = 0x12, |
| .perm = AB5500_PERM_RW, |
| }, |
| { |
| .first = 0x15, |
| .last = 0x19, |
| .perm = AB5500_PERM_RW, |
| }, |
| { |
| .first = 0x1B, |
| .last = 0x21, |
| .perm = AB5500_PERM_RW, |
| }, |
| { |
| .first = 0x27, |
| .last = 0x2C, |
| .perm = AB5500_PERM_RW, |
| }, |
| { |
| .first = 0x41, |
| .last = 0x41, |
| .perm = AB5500_PERM_RW, |
| }, |
| { |
| .first = 0x45, |
| .last = 0x5B, |
| .perm = AB5500_PERM_RW, |
| }, |
| { |
| .first = 0x5D, |
| .last = 0x5D, |
| .perm = AB5500_PERM_RW, |
| }, |
| { |
| .first = 0x69, |
| .last = 0x69, |
| .perm = AB5500_PERM_RW, |
| }, |
| { |
| .first = 0x6C, |
| .last = 0x6D, |
| .perm = AB5500_PERM_RW, |
| }, |
| { |
| .first = 0x80, |
| .last = 0x81, |
| .perm = AB5500_PERM_RW, |
| }, |
| }, |
| }, |
| }, |
| }, |
| [AB5500_DEVID_REGULATORS] = { |
| .nbanks = 2, |
| .bank = (struct ab5500_i2c_ranges []) { |
| { |
| .bankid = AB5500_BANK_STARTUP, |
| .nranges = 12, |
| .range = (struct ab5500_reg_range[]) { |
| { |
| .first = 0x00, |
| .last = 0x01, |
| .perm = AB5500_PERM_RW, |
| }, |
| { |
| .first = 0x1F, |
| .last = 0x1F, |
| .perm = AB5500_PERM_RW, |
| }, |
| { |
| .first = 0x2E, |
| .last = 0x2E, |
| .perm = AB5500_PERM_RO, |
| }, |
| { |
| .first = 0x2F, |
| .last = 0x30, |
| .perm = AB5500_PERM_RW, |
| }, |
| { |
| .first = 0x50, |
| .last = 0x51, |
| .perm = AB5500_PERM_RW, |
| }, |
| { |
| .first = 0x60, |
| .last = 0x61, |
| .perm = AB5500_PERM_RW, |
| }, |
| { |
| .first = 0x66, |
| .last = 0x8A, |
| .perm = AB5500_PERM_RW, |
| }, |
| { |
| .first = 0x8C, |
| .last = 0x96, |
| .perm = AB5500_PERM_RW, |
| }, |
| { |
| .first = 0xAA, |
| .last = 0xB4, |
| .perm = AB5500_PERM_RW, |
| }, |
| { |
| .first = 0xB7, |
| .last = 0xBF, |
| .perm = AB5500_PERM_RW, |
| }, |
| { |
| .first = 0xC1, |
| .last = 0xCA, |
| .perm = AB5500_PERM_RW, |
| }, |
| { |
| .first = 0xD3, |
| .last = 0xE0, |
| .perm = AB5500_PERM_RW, |
| }, |
| }, |
| }, |
| { |
| .bankid = AB5500_BANK_SIM_USBSIM, |
| .nranges = 1, |
| .range = (struct ab5500_reg_range[]) { |
| { |
| .first = 0x13, |
| .last = 0x19, |
| .perm = AB5500_PERM_RW, |
| }, |
| }, |
| }, |
| }, |
| }, |
| [AB5500_DEVID_SIM] = { |
| .nbanks = 1, |
| .bank = (struct ab5500_i2c_ranges []) { |
| { |
| .bankid = AB5500_BANK_SIM_USBSIM, |
| .nranges = 1, |
| .range = (struct ab5500_reg_range[]) { |
| { |
| .first = 0x13, |
| .last = 0x19, |
| .perm = AB5500_PERM_RW, |
| }, |
| }, |
| }, |
| }, |
| }, |
| [AB5500_DEVID_RTC] = { |
| .nbanks = 1, |
| .bank = (struct ab5500_i2c_ranges []) { |
| { |
| .bankid = AB5500_BANK_RTC, |
| .nranges = 2, |
| .range = (struct ab5500_reg_range[]) { |
| { |
| .first = 0x00, |
| .last = 0x04, |
| .perm = AB5500_PERM_RW, |
| }, |
| { |
| .first = 0x06, |
| .last = 0x0C, |
| .perm = AB5500_PERM_RW, |
| }, |
| }, |
| }, |
| }, |
| }, |
| [AB5500_DEVID_CHARGER] = { |
| .nbanks = 1, |
| .bank = (struct ab5500_i2c_ranges []) { |
| { |
| .bankid = AB5500_BANK_CHG, |
| .nranges = 2, |
| .range = (struct ab5500_reg_range[]) { |
| { |
| .first = 0x11, |
| .last = 0x11, |
| .perm = AB5500_PERM_RO, |
| }, |
| { |
| .first = 0x12, |
| .last = 0x1B, |
| .perm = AB5500_PERM_RW, |
| }, |
| }, |
| }, |
| }, |
| }, |
| [AB5500_DEVID_FUELGAUGE] = { |
| .nbanks = 1, |
| .bank = (struct ab5500_i2c_ranges []) { |
| { |
| .bankid = AB5500_BANK_FG_BATTCOM_ACC, |
| .nranges = 2, |
| .range = (struct ab5500_reg_range[]) { |
| { |
| .first = 0x00, |
| .last = 0x0B, |
| .perm = AB5500_PERM_RO, |
| }, |
| { |
| .first = 0x0C, |
| .last = 0x10, |
| .perm = AB5500_PERM_RW, |
| }, |
| }, |
| }, |
| }, |
| }, |
| [AB5500_DEVID_VIBRATOR] = { |
| .nbanks = 1, |
| .bank = (struct ab5500_i2c_ranges []) { |
| { |
| .bankid = AB5500_BANK_VIBRA, |
| .nranges = 2, |
| .range = (struct ab5500_reg_range[]) { |
| { |
| .first = 0x10, |
| .last = 0x13, |
| .perm = AB5500_PERM_RW, |
| }, |
| { |
| .first = 0xFE, |
| .last = 0xFE, |
| .perm = AB5500_PERM_RW, |
| }, |
| }, |
| }, |
| }, |
| }, |
| [AB5500_DEVID_CODEC] = { |
| .nbanks = 1, |
| .bank = (struct ab5500_i2c_ranges []) { |
| { |
| .bankid = AB5500_BANK_AUDIO_HEADSETUSB, |
| .nranges = 2, |
| .range = (struct ab5500_reg_range[]) { |
| { |
| .first = 0x00, |
| .last = 0x48, |
| .perm = AB5500_PERM_RW, |
| }, |
| { |
| .first = 0xEB, |
| .last = 0xFB, |
| .perm = AB5500_PERM_RW, |
| }, |
| }, |
| }, |
| }, |
| }, |
| [AB5500_DEVID_POWER] = { |
| .nbanks = 2, |
| .bank = (struct ab5500_i2c_ranges []) { |
| { |
| .bankid = AB5500_BANK_STARTUP, |
| .nranges = 1, |
| .range = (struct ab5500_reg_range[]) { |
| { |
| .first = 0x30, |
| .last = 0x30, |
| .perm = AB5500_PERM_RW, |
| }, |
| }, |
| }, |
| { |
| .bankid = AB5500_BANK_VIT_IO_I2C_CLK_TST_OTP, |
| .nranges = 1, |
| .range = (struct ab5500_reg_range[]) { |
| { |
| .first = 0x01, |
| .last = 0x01, |
| .perm = AB5500_PERM_RW, |
| }, |
| }, |
| }, |
| }, |
| }, |
| }; |
| |
| #define AB5500_IRQ(bank, bit) ((bank) * 8 + (bit)) |
| |
| /* I appologize for the resource names beeing a mix of upper case |
| * and lower case but I want them to be exact as the documentation */ |
| static struct mfd_cell ab5500_devs[AB5500_NUM_DEVICES] = { |
| [AB5500_DEVID_LEDS] = { |
| .name = "ab5500-leds", |
| .id = AB5500_DEVID_LEDS, |
| }, |
| [AB5500_DEVID_POWER] = { |
| .name = "ab5500-power", |
| .id = AB5500_DEVID_POWER, |
| }, |
| [AB5500_DEVID_REGULATORS] = { |
| .name = "ab5500-regulator", |
| .id = AB5500_DEVID_REGULATORS, |
| }, |
| [AB5500_DEVID_SIM] = { |
| .name = "ab5500-sim", |
| .id = AB5500_DEVID_SIM, |
| .num_resources = 1, |
| .resources = (struct resource[]) { |
| { |
| .name = "SIMOFF", |
| .flags = IORESOURCE_IRQ, |
| .start = AB5500_IRQ(2, 0), /*rising*/ |
| .end = AB5500_IRQ(2, 1), /*falling*/ |
| }, |
| }, |
| }, |
| [AB5500_DEVID_RTC] = { |
| .name = "ab5500-rtc", |
| .id = AB5500_DEVID_RTC, |
| .num_resources = 1, |
| .resources = (struct resource[]) { |
| { |
| .name = "RTC_Alarm", |
| .flags = IORESOURCE_IRQ, |
| .start = AB5500_IRQ(1, 7), |
| .end = AB5500_IRQ(1, 7), |
| } |
| }, |
| }, |
| [AB5500_DEVID_CHARGER] = { |
| .name = "ab5500-charger", |
| .id = AB5500_DEVID_CHARGER, |
| }, |
| [AB5500_DEVID_ADC] = { |
| .name = "ab5500-adc", |
| .id = AB5500_DEVID_ADC, |
| .num_resources = 10, |
| .resources = (struct resource[]) { |
| { |
| .name = "TRIGGER-0", |
| .flags = IORESOURCE_IRQ, |
| .start = AB5500_IRQ(0, 0), |
| .end = AB5500_IRQ(0, 0), |
| }, |
| { |
| .name = "TRIGGER-1", |
| .flags = IORESOURCE_IRQ, |
| .start = AB5500_IRQ(0, 1), |
| .end = AB5500_IRQ(0, 1), |
| }, |
| { |
| .name = "TRIGGER-2", |
| .flags = IORESOURCE_IRQ, |
| .start = AB5500_IRQ(0, 2), |
| .end = AB5500_IRQ(0, 2), |
| }, |
| { |
| .name = "TRIGGER-3", |
| .flags = IORESOURCE_IRQ, |
| .start = AB5500_IRQ(0, 3), |
| .end = AB5500_IRQ(0, 3), |
| }, |
| { |
| .name = "TRIGGER-4", |
| .flags = IORESOURCE_IRQ, |
| .start = AB5500_IRQ(0, 4), |
| .end = AB5500_IRQ(0, 4), |
| }, |
| { |
| .name = "TRIGGER-5", |
| .flags = IORESOURCE_IRQ, |
| .start = AB5500_IRQ(0, 5), |
| .end = AB5500_IRQ(0, 5), |
| }, |
| { |
| .name = "TRIGGER-6", |
| .flags = IORESOURCE_IRQ, |
| .start = AB5500_IRQ(0, 6), |
| .end = AB5500_IRQ(0, 6), |
| }, |
| { |
| .name = "TRIGGER-7", |
| .flags = IORESOURCE_IRQ, |
| .start = AB5500_IRQ(0, 7), |
| .end = AB5500_IRQ(0, 7), |
| }, |
| { |
| .name = "TRIGGER-VBAT", |
| .flags = IORESOURCE_IRQ, |
| .start = AB5500_IRQ(0, 8), |
| .end = AB5500_IRQ(0, 8), |
| }, |
| { |
| .name = "TRIGGER-VBAT-TXON", |
| .flags = IORESOURCE_IRQ, |
| .start = AB5500_IRQ(0, 9), |
| .end = AB5500_IRQ(0, 9), |
| }, |
| }, |
| }, |
| [AB5500_DEVID_FUELGAUGE] = { |
| .name = "ab5500-fuelgauge", |
| .id = AB5500_DEVID_FUELGAUGE, |
| .num_resources = 6, |
| .resources = (struct resource[]) { |
| { |
| .name = "Batt_attach", |
| .flags = IORESOURCE_IRQ, |
| .start = AB5500_IRQ(7, 5), |
| .end = AB5500_IRQ(7, 5), |
| }, |
| { |
| .name = "Batt_removal", |
| .flags = IORESOURCE_IRQ, |
| .start = AB5500_IRQ(7, 6), |
| .end = AB5500_IRQ(7, 6), |
| }, |
| { |
| .name = "UART_framing", |
| .flags = IORESOURCE_IRQ, |
| .start = AB5500_IRQ(7, 7), |
| .end = AB5500_IRQ(7, 7), |
| }, |
| { |
| .name = "UART_overrun", |
| .flags = IORESOURCE_IRQ, |
| .start = AB5500_IRQ(8, 0), |
| .end = AB5500_IRQ(8, 0), |
| }, |
| { |
| .name = "UART_Rdy_RX", |
| .flags = IORESOURCE_IRQ, |
| .start = AB5500_IRQ(8, 1), |
| .end = AB5500_IRQ(8, 1), |
| }, |
| { |
| .name = "UART_Rdy_TX", |
| .flags = IORESOURCE_IRQ, |
| .start = AB5500_IRQ(8, 2), |
| .end = AB5500_IRQ(8, 2), |
| }, |
| }, |
| }, |
| [AB5500_DEVID_VIBRATOR] = { |
| .name = "ab5500-vibrator", |
| .id = AB5500_DEVID_VIBRATOR, |
| }, |
| [AB5500_DEVID_CODEC] = { |
| .name = "ab5500-codec", |
| .id = AB5500_DEVID_CODEC, |
| .num_resources = 3, |
| .resources = (struct resource[]) { |
| { |
| .name = "audio_spkr1_ovc", |
| .flags = IORESOURCE_IRQ, |
| .start = AB5500_IRQ(9, 5), |
| .end = AB5500_IRQ(9, 5), |
| }, |
| { |
| .name = "audio_plllocked", |
| .flags = IORESOURCE_IRQ, |
| .start = AB5500_IRQ(9, 6), |
| .end = AB5500_IRQ(9, 6), |
| }, |
| { |
| .name = "audio_spkr2_ovc", |
| .flags = IORESOURCE_IRQ, |
| .start = AB5500_IRQ(17, 4), |
| .end = AB5500_IRQ(17, 4), |
| }, |
| }, |
| }, |
| [AB5500_DEVID_USB] = { |
| .name = "ab5500-usb", |
| .id = AB5500_DEVID_USB, |
| .num_resources = 36, |
| .resources = (struct resource[]) { |
| { |
| .name = "Link_Update", |
| .flags = IORESOURCE_IRQ, |
| .start = AB5500_IRQ(22, 1), |
| .end = AB5500_IRQ(22, 1), |
| }, |
| { |
| .name = "DCIO", |
| .flags = IORESOURCE_IRQ, |
| .start = AB5500_IRQ(8, 3), |
| .end = AB5500_IRQ(8, 4), |
| }, |
| { |
| .name = "VBUS_R", |
| .flags = IORESOURCE_IRQ, |
| .start = AB5500_IRQ(8, 5), |
| .end = AB5500_IRQ(8, 5), |
| }, |
| { |
| .name = "VBUS_F", |
| .flags = IORESOURCE_IRQ, |
| .start = AB5500_IRQ(8, 6), |
| .end = AB5500_IRQ(8, 6), |
| }, |
| { |
| .name = "CHGstate_10_PCVBUSchg", |
| .flags = IORESOURCE_IRQ, |
| .start = AB5500_IRQ(8, 7), |
| .end = AB5500_IRQ(8, 7), |
| }, |
| { |
| .name = "DCIOreverse_ovc", |
| .flags = IORESOURCE_IRQ, |
| .start = AB5500_IRQ(9, 0), |
| .end = AB5500_IRQ(9, 0), |
| }, |
| { |
| .name = "USBCharDetDone", |
| .flags = IORESOURCE_IRQ, |
| .start = AB5500_IRQ(9, 1), |
| .end = AB5500_IRQ(9, 1), |
| }, |
| { |
| .name = "DCIO_no_limit", |
| .flags = IORESOURCE_IRQ, |
| .start = AB5500_IRQ(9, 2), |
| .end = AB5500_IRQ(9, 2), |
| }, |
| { |
| .name = "USB_suspend", |
| .flags = IORESOURCE_IRQ, |
| .start = AB5500_IRQ(9, 3), |
| .end = AB5500_IRQ(9, 3), |
| }, |
| { |
| .name = "DCIOreverse_fwdcurrent", |
| .flags = IORESOURCE_IRQ, |
| .start = AB5500_IRQ(9, 4), |
| .end = AB5500_IRQ(9, 4), |
| }, |
| { |
| .name = "Vbus_Imeasmax_change", |
| .flags = IORESOURCE_IRQ, |
| .start = AB5500_IRQ(9, 5), |
| .end = AB5500_IRQ(9, 6), |
| }, |
| { |
| .name = "OVV", |
| .flags = IORESOURCE_IRQ, |
| .start = AB5500_IRQ(14, 5), |
| .end = AB5500_IRQ(14, 5), |
| }, |
| { |
| .name = "USBcharging_NOTok", |
| .flags = IORESOURCE_IRQ, |
| .start = AB5500_IRQ(15, 3), |
| .end = AB5500_IRQ(15, 3), |
| }, |
| { |
| .name = "usb_adp_sensoroff", |
| .flags = IORESOURCE_IRQ, |
| .start = AB5500_IRQ(15, 6), |
| .end = AB5500_IRQ(15, 6), |
| }, |
| { |
| .name = "usb_adp_probeplug", |
| .flags = IORESOURCE_IRQ, |
| .start = AB5500_IRQ(15, 7), |
| .end = AB5500_IRQ(15, 7), |
| }, |
| { |
| .name = "usb_adp_sinkerror", |
| .flags = IORESOURCE_IRQ, |
| .start = AB5500_IRQ(16, 0), |
| .end = AB5500_IRQ(16, 6), |
| }, |
| { |
| .name = "usb_adp_sourceerror", |
| .flags = IORESOURCE_IRQ, |
| .start = AB5500_IRQ(16, 1), |
| .end = AB5500_IRQ(16, 1), |
| }, |
| { |
| .name = "usb_idgnd_r", |
| .flags = IORESOURCE_IRQ, |
| .start = AB5500_IRQ(16, 2), |
| .end = AB5500_IRQ(16, 2), |
| }, |
| { |
| .name = "usb_idgnd_f", |
| .flags = IORESOURCE_IRQ, |
| .start = AB5500_IRQ(16, 3), |
| .end = AB5500_IRQ(16, 3), |
| }, |
| { |
| .name = "usb_iddetR1", |
| .flags = IORESOURCE_IRQ, |
| .start = AB5500_IRQ(16, 4), |
| .end = AB5500_IRQ(16, 5), |
| }, |
| { |
| .name = "usb_iddetR2", |
| .flags = IORESOURCE_IRQ, |
| .start = AB5500_IRQ(16, 6), |
| .end = AB5500_IRQ(16, 7), |
| }, |
| { |
| .name = "usb_iddetR3", |
| .flags = IORESOURCE_IRQ, |
| .start = AB5500_IRQ(17, 0), |
| .end = AB5500_IRQ(17, 1), |
| }, |
| { |
| .name = "usb_iddetR4", |
| .flags = IORESOURCE_IRQ, |
| .start = AB5500_IRQ(17, 2), |
| .end = AB5500_IRQ(17, 3), |
| }, |
| { |
| .name = "CharTempWindowOk", |
| .flags = IORESOURCE_IRQ, |
| .start = AB5500_IRQ(17, 7), |
| .end = AB5500_IRQ(18, 0), |
| }, |
| { |
| .name = "USB_SprDetect", |
| .flags = IORESOURCE_IRQ, |
| .start = AB5500_IRQ(18, 1), |
| .end = AB5500_IRQ(18, 1), |
| }, |
| { |
| .name = "usb_adp_probe_unplug", |
| .flags = IORESOURCE_IRQ, |
| .start = AB5500_IRQ(18, 2), |
| .end = AB5500_IRQ(18, 2), |
| }, |
| { |
| .name = "VBUSChDrop", |
| .flags = IORESOURCE_IRQ, |
| .start = AB5500_IRQ(18, 3), |
| .end = AB5500_IRQ(18, 4), |
| }, |
| { |
| .name = "dcio_char_rec_done", |
| .flags = IORESOURCE_IRQ, |
| .start = AB5500_IRQ(18, 5), |
| .end = AB5500_IRQ(18, 5), |
| }, |
| { |
| .name = "Charging_stopped_by_temp", |
| .flags = IORESOURCE_IRQ, |
| .start = AB5500_IRQ(18, 6), |
| .end = AB5500_IRQ(18, 6), |
| }, |
| { |
| .name = "CHGstate_11_SafeModeVBUS", |
| .flags = IORESOURCE_IRQ, |
| .start = AB5500_IRQ(21, 1), |
| .end = AB5500_IRQ(21, 2), |
| }, |
| { |
| .name = "CHGstate_12_comletedVBUS", |
| .flags = IORESOURCE_IRQ, |
| .start = AB5500_IRQ(21, 2), |
| .end = AB5500_IRQ(21, 2), |
| }, |
| { |
| .name = "CHGstate_13_completedVBUS", |
| .flags = IORESOURCE_IRQ, |
| .start = AB5500_IRQ(21, 3), |
| .end = AB5500_IRQ(21, 3), |
| }, |
| { |
| .name = "CHGstate_14_FullChgDCIO", |
| .flags = IORESOURCE_IRQ, |
| .start = AB5500_IRQ(21, 4), |
| .end = AB5500_IRQ(21, 4), |
| }, |
| { |
| .name = "CHGstate_15_SafeModeDCIO", |
| .flags = IORESOURCE_IRQ, |
| .start = AB5500_IRQ(21, 5), |
| .end = AB5500_IRQ(21, 5), |
| }, |
| { |
| .name = "CHGstate_16_OFFsuspendDCIO", |
| .flags = IORESOURCE_IRQ, |
| .start = AB5500_IRQ(21, 6), |
| .end = AB5500_IRQ(21, 6), |
| }, |
| { |
| .name = "CHGstate_17_completedDCIO", |
| .flags = IORESOURCE_IRQ, |
| .start = AB5500_IRQ(21, 7), |
| .end = AB5500_IRQ(21, 7), |
| }, |
| }, |
| }, |
| [AB5500_DEVID_OTP] = { |
| .name = "ab5500-otp", |
| .id = AB5500_DEVID_OTP, |
| }, |
| [AB5500_DEVID_VIDEO] = { |
| .name = "ab5500-video", |
| .id = AB5500_DEVID_VIDEO, |
| .num_resources = 1, |
| .resources = (struct resource[]) { |
| { |
| .name = "plugTVdet", |
| .flags = IORESOURCE_IRQ, |
| .start = AB5500_IRQ(22, 2), |
| .end = AB5500_IRQ(22, 2), |
| }, |
| }, |
| }, |
| [AB5500_DEVID_DBIECI] = { |
| .name = "ab5500-dbieci", |
| .id = AB5500_DEVID_DBIECI, |
| .num_resources = 10, |
| .resources = (struct resource[]) { |
| { |
| .name = "COLL", |
| .flags = IORESOURCE_IRQ, |
| .start = AB5500_IRQ(14, 0), |
| .end = AB5500_IRQ(14, 0), |
| }, |
| { |
| .name = "RESERR", |
| .flags = IORESOURCE_IRQ, |
| .start = AB5500_IRQ(14, 1), |
| .end = AB5500_IRQ(14, 1), |
| }, |
| { |
| .name = "FRAERR", |
| .flags = IORESOURCE_IRQ, |
| .start = AB5500_IRQ(14, 2), |
| .end = AB5500_IRQ(14, 2), |
| }, |
| { |
| .name = "COMERR", |
| .flags = IORESOURCE_IRQ, |
| .start = AB5500_IRQ(14, 3), |
| .end = AB5500_IRQ(14, 3), |
| }, |
| { |
| .name = "BSI_indicator", |
| .flags = IORESOURCE_IRQ, |
| .start = AB5500_IRQ(14, 4), |
| .end = AB5500_IRQ(14, 4), |
| }, |
| { |
| .name = "SPDSET", |
| .flags = IORESOURCE_IRQ, |
| .start = AB5500_IRQ(14, 6), |
| .end = AB5500_IRQ(14, 6), |
| }, |
| { |
| .name = "DSENT", |
| .flags = IORESOURCE_IRQ, |
| .start = AB5500_IRQ(14, 7), |
| .end = AB5500_IRQ(14, 7), |
| }, |
| { |
| .name = "DREC", |
| .flags = IORESOURCE_IRQ, |
| .start = AB5500_IRQ(15, 0), |
| .end = AB5500_IRQ(15, 0), |
| }, |
| { |
| .name = "ACCINT", |
| .flags = IORESOURCE_IRQ, |
| .start = AB5500_IRQ(15, 1), |
| .end = AB5500_IRQ(15, 1), |
| }, |
| { |
| .name = "NOPINT", |
| .flags = IORESOURCE_IRQ, |
| .start = AB5500_IRQ(15, 2), |
| .end = AB5500_IRQ(15, 2), |
| }, |
| }, |
| }, |
| [AB5500_DEVID_ONSWA] = { |
| .name = "ab5500-onswa", |
| .id = AB5500_DEVID_ONSWA, |
| .num_resources = 2, |
| .resources = (struct resource[]) { |
| { |
| .name = "ONSWAn_rising", |
| .flags = IORESOURCE_IRQ, |
| .start = AB5500_IRQ(1, 3), |
| .end = AB5500_IRQ(1, 3), |
| }, |
| { |
| .name = "ONSWAn_falling", |
| .flags = IORESOURCE_IRQ, |
| .start = AB5500_IRQ(1, 4), |
| .end = AB5500_IRQ(1, 4), |
| }, |
| }, |
| }, |
| }; |
| |
| /* |
| * Functionality for getting/setting register values. |
| */ |
| int ab5500_get_register_interruptible_raw(struct ab5500 *ab, |
| u8 bank, u8 reg, |
| u8 *value) |
| { |
| int err; |
| |
| if (bank >= AB5500_NUM_BANKS) |
| return -EINVAL; |
| |
| err = mutex_lock_interruptible(&ab->access_mutex); |
| if (err) |
| return err; |
| err = db5500_prcmu_abb_read(bankinfo[bank].slave_addr, reg, value, 1); |
| |
| mutex_unlock(&ab->access_mutex); |
| return err; |
| } |
| |
| static int get_register_page_interruptible(struct ab5500 *ab, u8 bank, |
| u8 first_reg, u8 *regvals, u8 numregs) |
| { |
| int err; |
| |
| if (bank >= AB5500_NUM_BANKS) |
| return -EINVAL; |
| |
| err = mutex_lock_interruptible(&ab->access_mutex); |
| if (err) |
| return err; |
| |
| while (numregs) { |
| /* The hardware limit for get page is 4 */ |
| u8 curnum = min_t(u8, numregs, 4u); |
| |
| err = db5500_prcmu_abb_read(bankinfo[bank].slave_addr, |
| first_reg, regvals, curnum); |
| if (err) |
| goto out; |
| |
| numregs -= curnum; |
| first_reg += curnum; |
| regvals += curnum; |
| } |
| |
| out: |
| mutex_unlock(&ab->access_mutex); |
| return err; |
| } |
| |
| int ab5500_mask_and_set_register_interruptible_raw(struct ab5500 *ab, u8 bank, |
| u8 reg, u8 bitmask, u8 bitvalues) |
| { |
| int err = 0; |
| |
| if (bank >= AB5500_NUM_BANKS) |
| return -EINVAL; |
| |
| if (bitmask) { |
| u8 buf; |
| |
| err = mutex_lock_interruptible(&ab->access_mutex); |
| if (err) |
| return err; |
| |
| if (bitmask == 0xFF) /* No need to read in this case. */ |
| buf = bitvalues; |
| else { /* Read and modify the register value. */ |
| err = db5500_prcmu_abb_read(bankinfo[bank].slave_addr, |
| reg, &buf, 1); |
| if (err) |
| return err; |
| |
| buf = ((~bitmask & buf) | (bitmask & bitvalues)); |
| } |
| /* Write the new value. */ |
| err = db5500_prcmu_abb_write(bankinfo[bank].slave_addr, reg, |
| &buf, 1); |
| |
| mutex_unlock(&ab->access_mutex); |
| } |
| return err; |
| } |
| |
| static int |
| set_register_interruptible(struct ab5500 *ab, u8 bank, u8 reg, u8 value) |
| { |
| return ab5500_mask_and_set_register_interruptible_raw(ab, bank, reg, |
| 0xff, value); |
| } |
| |
| /* |
| * Read/write permission checking functions. |
| */ |
| static const struct ab5500_i2c_ranges *get_bankref(u8 devid, u8 bank) |
| { |
| u8 i; |
| |
| if (devid < AB5500_NUM_DEVICES) { |
| for (i = 0; i < ab5500_bank_ranges[devid].nbanks; i++) { |
| if (ab5500_bank_ranges[devid].bank[i].bankid == bank) |
| return &ab5500_bank_ranges[devid].bank[i]; |
| } |
| } |
| return NULL; |
| } |
| |
| static bool page_write_allowed(u8 devid, u8 bank, u8 first_reg, u8 last_reg) |
| { |
| u8 i; /* range loop index */ |
| const struct ab5500_i2c_ranges *bankref; |
| |
| bankref = get_bankref(devid, bank); |
| if (bankref == NULL || last_reg < first_reg) |
| return false; |
| |
| for (i = 0; i < bankref->nranges; i++) { |
| if (first_reg < bankref->range[i].first) |
| break; |
| if ((last_reg <= bankref->range[i].last) && |
| (bankref->range[i].perm & AB5500_PERM_WR)) |
| return true; |
| } |
| return false; |
| } |
| |
| static bool reg_write_allowed(u8 devid, u8 bank, u8 reg) |
| { |
| return page_write_allowed(devid, bank, reg, reg); |
| } |
| |
| static bool page_read_allowed(u8 devid, u8 bank, u8 first_reg, u8 last_reg) |
| { |
| u8 i; |
| const struct ab5500_i2c_ranges *bankref; |
| |
| bankref = get_bankref(devid, bank); |
| if (bankref == NULL || last_reg < first_reg) |
| return false; |
| |
| |
| /* Find the range (if it exists in the list) that includes first_reg. */ |
| for (i = 0; i < bankref->nranges; i++) { |
| if (first_reg < bankref->range[i].first) |
| return false; |
| if (first_reg <= bankref->range[i].last) |
| break; |
| } |
| /* Make sure that the entire range up to and including last_reg is |
| * readable. This may span several of the ranges in the list. |
| */ |
| while ((i < bankref->nranges) && |
| (bankref->range[i].perm & AB5500_PERM_RD)) { |
| if (last_reg <= bankref->range[i].last) |
| return true; |
| if ((++i >= bankref->nranges) || |
| (bankref->range[i].first != |
| (bankref->range[i - 1].last + 1))) { |
| break; |
| } |
| } |
| return false; |
| } |
| |
| static bool reg_read_allowed(u8 devid, u8 bank, u8 reg) |
| { |
| return page_read_allowed(devid, bank, reg, reg); |
| } |
| |
| |
| /* |
| * The exported register access functionality. |
| */ |
| static int ab5500_get_chip_id(struct device *dev) |
| { |
| struct ab5500 *ab = dev_get_drvdata(dev->parent); |
| |
| return (int)ab->chip_id; |
| } |
| |
| static int ab5500_mask_and_set_register_interruptible(struct device *dev, |
| u8 bank, u8 reg, u8 bitmask, u8 bitvalues) |
| { |
| struct ab5500 *ab; |
| struct platform_device *pdev = to_platform_device(dev); |
| |
| if ((AB5500_NUM_BANKS <= bank) || |
| !reg_write_allowed(pdev->id, bank, reg)) |
| return -EINVAL; |
| |
| ab = dev_get_drvdata(dev->parent); |
| return ab5500_mask_and_set_register_interruptible_raw(ab, bank, reg, |
| bitmask, bitvalues); |
| } |
| |
| static int ab5500_set_register_interruptible(struct device *dev, u8 bank, |
| u8 reg, u8 value) |
| { |
| return ab5500_mask_and_set_register_interruptible(dev, bank, reg, 0xFF, |
| value); |
| } |
| |
| static int ab5500_get_register_interruptible(struct device *dev, u8 bank, |
| u8 reg, u8 *value) |
| { |
| struct ab5500 *ab; |
| struct platform_device *pdev = to_platform_device(dev); |
| |
| if ((AB5500_NUM_BANKS <= bank) || |
| !reg_read_allowed(pdev->id, bank, reg)) |
| return -EINVAL; |
| |
| ab = dev_get_drvdata(dev->parent); |
| return ab5500_get_register_interruptible_raw(ab, bank, reg, value); |
| } |
| |
| static int ab5500_get_register_page_interruptible(struct device *dev, u8 bank, |
| u8 first_reg, u8 *regvals, u8 numregs) |
| { |
| struct ab5500 *ab; |
| struct platform_device *pdev = to_platform_device(dev); |
| |
| if ((AB5500_NUM_BANKS <= bank) || |
| !page_read_allowed(pdev->id, bank, |
| first_reg, (first_reg + numregs - 1))) |
| return -EINVAL; |
| |
| ab = dev_get_drvdata(dev->parent); |
| return get_register_page_interruptible(ab, bank, first_reg, regvals, |
| numregs); |
| } |
| |
| static int |
| ab5500_event_registers_startup_state_get(struct device *dev, u8 *event) |
| { |
| struct ab5500 *ab; |
| |
| ab = dev_get_drvdata(dev->parent); |
| if (!ab->startup_events_read) |
| return -EAGAIN; /* Try again later */ |
| |
| memcpy(event, ab->startup_events, AB5500_NUM_EVENT_REG); |
| return 0; |
| } |
| |
| static struct abx500_ops ab5500_ops = { |
| .get_chip_id = ab5500_get_chip_id, |
| .get_register = ab5500_get_register_interruptible, |
| .set_register = ab5500_set_register_interruptible, |
| .get_register_page = ab5500_get_register_page_interruptible, |
| .set_register_page = NULL, |
| .mask_and_set_register = ab5500_mask_and_set_register_interruptible, |
| .event_registers_startup_state_get = |
| ab5500_event_registers_startup_state_get, |
| .startup_irq_enabled = NULL, |
| }; |
| |
| /* |
| * ab5500_setup : Basic set-up, datastructure creation/destruction |
| * and I2C interface.This sets up a default config |
| * in the AB5500 chip so that it will work as expected. |
| * @ab : Pointer to ab5500 structure |
| * @settings : Pointer to struct abx500_init_settings |
| * @size : Size of init data |
| */ |
| static int __init ab5500_setup(struct ab5500 *ab, |
| struct abx500_init_settings *settings, unsigned int size) |
| { |
| int err = 0; |
| int i; |
| |
| for (i = 0; i < size; i++) { |
| err = ab5500_mask_and_set_register_interruptible_raw(ab, |
| settings[i].bank, |
| settings[i].reg, |
| 0xFF, settings[i].setting); |
| if (err) |
| goto exit_no_setup; |
| |
| /* If event mask register update the event mask in ab5500 */ |
| if ((settings[i].bank == AB5500_BANK_IT) && |
| (AB5500_MASK_BASE <= settings[i].reg) && |
| (settings[i].reg <= AB5500_MASK_END)) { |
| ab->mask[settings[i].reg - AB5500_MASK_BASE] = |
| settings[i].setting; |
| } |
| } |
| exit_no_setup: |
| return err; |
| } |
| |
| struct ab_family_id { |
| u8 id; |
| char *name; |
| }; |
| |
| static const struct ab_family_id ids[] __initdata = { |
| /* AB5500 */ |
| { |
| .id = AB5500_1_0, |
| .name = "1.0" |
| }, |
| { |
| .id = AB5500_1_1, |
| .name = "1.1" |
| }, |
| /* Terminator */ |
| { |
| .id = 0x00, |
| } |
| }; |
| |
| static int __init ab5500_probe(struct platform_device *pdev) |
| { |
| struct ab5500 *ab; |
| struct ab5500_platform_data *ab5500_plf_data = |
| pdev->dev.platform_data; |
| int err; |
| int i; |
| |
| ab = kzalloc(sizeof(struct ab5500), GFP_KERNEL); |
| if (!ab) { |
| dev_err(&pdev->dev, |
| "could not allocate ab5500 device\n"); |
| return -ENOMEM; |
| } |
| |
| /* Initialize data structure */ |
| mutex_init(&ab->access_mutex); |
| mutex_init(&ab->irq_lock); |
| ab->dev = &pdev->dev; |
| |
| platform_set_drvdata(pdev, ab); |
| |
| /* Read chip ID register */ |
| err = ab5500_get_register_interruptible_raw(ab, |
| AB5500_BANK_VIT_IO_I2C_CLK_TST_OTP, |
| AB5500_CHIP_ID, &ab->chip_id); |
| if (err) { |
| dev_err(&pdev->dev, "could not communicate with the analog " |
| "baseband chip\n"); |
| goto exit_no_detect; |
| } |
| |
| for (i = 0; ids[i].id != 0x0; i++) { |
| if (ids[i].id == ab->chip_id) { |
| snprintf(&ab->chip_name[0], sizeof(ab->chip_name) - 1, |
| "AB5500 %s", ids[i].name); |
| break; |
| } |
| } |
| if (ids[i].id == 0x0) { |
| dev_err(&pdev->dev, "unknown analog baseband chip id: 0x%x\n", |
| ab->chip_id); |
| dev_err(&pdev->dev, "driver not started!\n"); |
| goto exit_no_detect; |
| } |
| |
| /* Clear and mask all interrupts */ |
| for (i = 0; i < AB5500_NUM_IRQ_REGS; i++) { |
| u8 latchreg = AB5500_IT_LATCH0_REG + i; |
| u8 maskreg = AB5500_IT_MASK0_REG + i; |
| u8 val; |
| |
| ab5500_get_register_interruptible_raw(ab, AB5500_BANK_IT, |
| latchreg, &val); |
| set_register_interruptible(ab, AB5500_BANK_IT, maskreg, 0xff); |
| ab->mask[i] = ab->oldmask[i] = 0xff; |
| } |
| |
| err = abx500_register_ops(&pdev->dev, &ab5500_ops); |
| if (err) { |
| dev_err(&pdev->dev, "ab5500_register ops error\n"); |
| goto exit_no_detect; |
| } |
| |
| /* Set up and register the platform devices. */ |
| for (i = 0; i < AB5500_NUM_DEVICES; i++) { |
| ab5500_devs[i].platform_data = ab5500_plf_data->dev_data[i]; |
| ab5500_devs[i].pdata_size = |
| sizeof(ab5500_plf_data->dev_data[i]); |
| } |
| |
| err = mfd_add_devices(&pdev->dev, 0, ab5500_devs, |
| ARRAY_SIZE(ab5500_devs), NULL, |
| ab5500_plf_data->irq.base); |
| if (err) { |
| dev_err(&pdev->dev, "ab5500_mfd_add_device error\n"); |
| goto exit_no_detect; |
| } |
| |
| err = ab5500_setup(ab, ab5500_plf_data->init_settings, |
| ab5500_plf_data->init_settings_sz); |
| if (err) { |
| dev_err(&pdev->dev, "ab5500_setup error\n"); |
| goto exit_no_detect; |
| } |
| |
| ab5500_setup_debugfs(ab); |
| |
| dev_info(&pdev->dev, "detected AB chip: %s\n", &ab->chip_name[0]); |
| return 0; |
| |
| exit_no_detect: |
| kfree(ab); |
| return err; |
| } |
| |
| static int __exit ab5500_remove(struct platform_device *pdev) |
| { |
| struct ab5500 *ab = platform_get_drvdata(pdev); |
| |
| ab5500_remove_debugfs(); |
| mfd_remove_devices(&pdev->dev); |
| kfree(ab); |
| return 0; |
| } |
| |
| static struct platform_driver ab5500_driver = { |
| .driver = { |
| .name = "ab5500-core", |
| .owner = THIS_MODULE, |
| }, |
| .remove = __exit_p(ab5500_remove), |
| }; |
| |
| static int __init ab5500_core_init(void) |
| { |
| return platform_driver_probe(&ab5500_driver, ab5500_probe); |
| } |
| |
| static void __exit ab5500_core_exit(void) |
| { |
| platform_driver_unregister(&ab5500_driver); |
| } |
| |
| subsys_initcall(ab5500_core_init); |
| module_exit(ab5500_core_exit); |
| |
| MODULE_AUTHOR("Mattias Wallin <mattias.wallin@stericsson.com>"); |
| MODULE_DESCRIPTION("AB5500 core driver"); |
| MODULE_LICENSE("GPL"); |