| /* |
| * include/linux/ktime.h |
| * |
| * ktime_t - nanosecond-resolution time format. |
| * |
| * Copyright(C) 2005, Thomas Gleixner <tglx@linutronix.de> |
| * Copyright(C) 2005, Red Hat, Inc., Ingo Molnar |
| * |
| * data type definitions, declarations, prototypes and macros. |
| * |
| * Started by: Thomas Gleixner and Ingo Molnar |
| * |
| * Credits: |
| * |
| * Roman Zippel provided the ideas and primary code snippets of |
| * the ktime_t union and further simplifications of the original |
| * code. |
| * |
| * For licencing details see kernel-base/COPYING |
| */ |
| #ifndef _LINUX_KTIME_H |
| #define _LINUX_KTIME_H |
| |
| #include <linux/time.h> |
| #include <linux/jiffies.h> |
| |
| /* |
| * ktime_t: |
| * |
| * A single 64-bit variable is used to store the hrtimers |
| * internal representation of time values in scalar nanoseconds. The |
| * design plays out best on 64-bit CPUs, where most conversions are |
| * NOPs and most arithmetic ktime_t operations are plain arithmetic |
| * operations. |
| * |
| */ |
| union ktime { |
| s64 tv64; |
| }; |
| |
| typedef union ktime ktime_t; /* Kill this */ |
| |
| /** |
| * ktime_set - Set a ktime_t variable from a seconds/nanoseconds value |
| * @secs: seconds to set |
| * @nsecs: nanoseconds to set |
| * |
| * Return: The ktime_t representation of the value. |
| */ |
| static inline ktime_t ktime_set(const s64 secs, const unsigned long nsecs) |
| { |
| if (unlikely(secs >= KTIME_SEC_MAX)) |
| return (ktime_t){ .tv64 = KTIME_MAX }; |
| |
| return (ktime_t) { .tv64 = secs * NSEC_PER_SEC + (s64)nsecs }; |
| } |
| |
| /* Subtract two ktime_t variables. rem = lhs -rhs: */ |
| #define ktime_sub(lhs, rhs) \ |
| ({ (ktime_t){ .tv64 = (lhs).tv64 - (rhs).tv64 }; }) |
| |
| /* Add two ktime_t variables. res = lhs + rhs: */ |
| #define ktime_add(lhs, rhs) \ |
| ({ (ktime_t){ .tv64 = (lhs).tv64 + (rhs).tv64 }; }) |
| |
| /* |
| * Add a ktime_t variable and a scalar nanosecond value. |
| * res = kt + nsval: |
| */ |
| #define ktime_add_ns(kt, nsval) \ |
| ({ (ktime_t){ .tv64 = (kt).tv64 + (nsval) }; }) |
| |
| /* |
| * Subtract a scalar nanosecod from a ktime_t variable |
| * res = kt - nsval: |
| */ |
| #define ktime_sub_ns(kt, nsval) \ |
| ({ (ktime_t){ .tv64 = (kt).tv64 - (nsval) }; }) |
| |
| /* convert a timespec to ktime_t format: */ |
| static inline ktime_t timespec_to_ktime(struct timespec ts) |
| { |
| return ktime_set(ts.tv_sec, ts.tv_nsec); |
| } |
| |
| /* convert a timespec64 to ktime_t format: */ |
| static inline ktime_t timespec64_to_ktime(struct timespec64 ts) |
| { |
| return ktime_set(ts.tv_sec, ts.tv_nsec); |
| } |
| |
| /* convert a timeval to ktime_t format: */ |
| static inline ktime_t timeval_to_ktime(struct timeval tv) |
| { |
| return ktime_set(tv.tv_sec, tv.tv_usec * NSEC_PER_USEC); |
| } |
| |
| /* Map the ktime_t to timespec conversion to ns_to_timespec function */ |
| #define ktime_to_timespec(kt) ns_to_timespec((kt).tv64) |
| |
| /* Map the ktime_t to timespec conversion to ns_to_timespec function */ |
| #define ktime_to_timespec64(kt) ns_to_timespec64((kt).tv64) |
| |
| /* Map the ktime_t to timeval conversion to ns_to_timeval function */ |
| #define ktime_to_timeval(kt) ns_to_timeval((kt).tv64) |
| |
| /* Convert ktime_t to nanoseconds - NOP in the scalar storage format: */ |
| #define ktime_to_ns(kt) ((kt).tv64) |
| |
| |
| /** |
| * ktime_equal - Compares two ktime_t variables to see if they are equal |
| * @cmp1: comparable1 |
| * @cmp2: comparable2 |
| * |
| * Compare two ktime_t variables. |
| * |
| * Return: 1 if equal. |
| */ |
| static inline int ktime_equal(const ktime_t cmp1, const ktime_t cmp2) |
| { |
| return cmp1.tv64 == cmp2.tv64; |
| } |
| |
| /** |
| * ktime_compare - Compares two ktime_t variables for less, greater or equal |
| * @cmp1: comparable1 |
| * @cmp2: comparable2 |
| * |
| * Return: ... |
| * cmp1 < cmp2: return <0 |
| * cmp1 == cmp2: return 0 |
| * cmp1 > cmp2: return >0 |
| */ |
| static inline int ktime_compare(const ktime_t cmp1, const ktime_t cmp2) |
| { |
| if (cmp1.tv64 < cmp2.tv64) |
| return -1; |
| if (cmp1.tv64 > cmp2.tv64) |
| return 1; |
| return 0; |
| } |
| |
| /** |
| * ktime_after - Compare if a ktime_t value is bigger than another one. |
| * @cmp1: comparable1 |
| * @cmp2: comparable2 |
| * |
| * Return: true if cmp1 happened after cmp2. |
| */ |
| static inline bool ktime_after(const ktime_t cmp1, const ktime_t cmp2) |
| { |
| return ktime_compare(cmp1, cmp2) > 0; |
| } |
| |
| /** |
| * ktime_before - Compare if a ktime_t value is smaller than another one. |
| * @cmp1: comparable1 |
| * @cmp2: comparable2 |
| * |
| * Return: true if cmp1 happened before cmp2. |
| */ |
| static inline bool ktime_before(const ktime_t cmp1, const ktime_t cmp2) |
| { |
| return ktime_compare(cmp1, cmp2) < 0; |
| } |
| |
| #if BITS_PER_LONG < 64 |
| extern u64 __ktime_divns(const ktime_t kt, s64 div); |
| static inline u64 ktime_divns(const ktime_t kt, s64 div) |
| { |
| if (__builtin_constant_p(div) && !(div >> 32)) { |
| u64 ns = kt.tv64; |
| do_div(ns, div); |
| return ns; |
| } else { |
| return __ktime_divns(kt, div); |
| } |
| } |
| #else /* BITS_PER_LONG < 64 */ |
| # define ktime_divns(kt, div) (u64)((kt).tv64 / (div)) |
| #endif |
| |
| static inline s64 ktime_to_us(const ktime_t kt) |
| { |
| return ktime_divns(kt, NSEC_PER_USEC); |
| } |
| |
| static inline s64 ktime_to_ms(const ktime_t kt) |
| { |
| return ktime_divns(kt, NSEC_PER_MSEC); |
| } |
| |
| static inline s64 ktime_us_delta(const ktime_t later, const ktime_t earlier) |
| { |
| return ktime_to_us(ktime_sub(later, earlier)); |
| } |
| |
| static inline s64 ktime_ms_delta(const ktime_t later, const ktime_t earlier) |
| { |
| return ktime_to_ms(ktime_sub(later, earlier)); |
| } |
| |
| static inline ktime_t ktime_add_us(const ktime_t kt, const u64 usec) |
| { |
| return ktime_add_ns(kt, usec * NSEC_PER_USEC); |
| } |
| |
| static inline ktime_t ktime_add_ms(const ktime_t kt, const u64 msec) |
| { |
| return ktime_add_ns(kt, msec * NSEC_PER_MSEC); |
| } |
| |
| static inline ktime_t ktime_sub_us(const ktime_t kt, const u64 usec) |
| { |
| return ktime_sub_ns(kt, usec * NSEC_PER_USEC); |
| } |
| |
| extern ktime_t ktime_add_safe(const ktime_t lhs, const ktime_t rhs); |
| |
| /** |
| * ktime_to_timespec_cond - convert a ktime_t variable to timespec |
| * format only if the variable contains data |
| * @kt: the ktime_t variable to convert |
| * @ts: the timespec variable to store the result in |
| * |
| * Return: %true if there was a successful conversion, %false if kt was 0. |
| */ |
| static inline __must_check bool ktime_to_timespec_cond(const ktime_t kt, |
| struct timespec *ts) |
| { |
| if (kt.tv64) { |
| *ts = ktime_to_timespec(kt); |
| return true; |
| } else { |
| return false; |
| } |
| } |
| |
| /** |
| * ktime_to_timespec64_cond - convert a ktime_t variable to timespec64 |
| * format only if the variable contains data |
| * @kt: the ktime_t variable to convert |
| * @ts: the timespec variable to store the result in |
| * |
| * Return: %true if there was a successful conversion, %false if kt was 0. |
| */ |
| static inline __must_check bool ktime_to_timespec64_cond(const ktime_t kt, |
| struct timespec64 *ts) |
| { |
| if (kt.tv64) { |
| *ts = ktime_to_timespec64(kt); |
| return true; |
| } else { |
| return false; |
| } |
| } |
| |
| /* |
| * The resolution of the clocks. The resolution value is returned in |
| * the clock_getres() system call to give application programmers an |
| * idea of the (in)accuracy of timers. Timer values are rounded up to |
| * this resolution values. |
| */ |
| #define LOW_RES_NSEC TICK_NSEC |
| #define KTIME_LOW_RES (ktime_t){ .tv64 = LOW_RES_NSEC } |
| |
| static inline ktime_t ns_to_ktime(u64 ns) |
| { |
| static const ktime_t ktime_zero = { .tv64 = 0 }; |
| |
| return ktime_add_ns(ktime_zero, ns); |
| } |
| |
| static inline ktime_t ms_to_ktime(u64 ms) |
| { |
| static const ktime_t ktime_zero = { .tv64 = 0 }; |
| |
| return ktime_add_ms(ktime_zero, ms); |
| } |
| |
| # include <linux/timekeeping.h> |
| |
| #endif |