drivers/net/sfc/sfe4001.c - kernel/msm-4.9 - Gitiles

 /****************************************************************************
  * Driver for Solarflare Solarstorm network controllers and boards
  * Copyright 2007 Solarflare Communications Inc.
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms of the GNU General Public License version 2 as published
  * by the Free Software Foundation, incorporated herein by reference.
  */

 /*****************************************************************************
  * Support for the SFE4001 NIC: driver code for the PCA9539 I/O expander that
  * controls the PHY power rails, and for the MAX6647 temp. sensor used to check
  * the PHY
  */
 #include <linux/delay.h>
 #include "net_driver.h"
 #include "efx.h"
 #include "phy.h"
 #include "boards.h"
 #include "falcon.h"
 #include "falcon_hwdefs.h"
 #include "falcon_io.h"
 #include "mac.h"

 /**************************************************************************
  *
  * I2C IO Expander device
  *
  **************************************************************************/
 #define	PCA9539 0x74

 #define	P0_IN 0x00
 #define	P0_OUT 0x02
 #define	P0_INVERT 0x04
 #define	P0_CONFIG 0x06

 #define	P0_EN_1V0X_LBN 0
 #define	P0_EN_1V0X_WIDTH 1
 #define	P0_EN_1V2_LBN 1
 #define	P0_EN_1V2_WIDTH 1
 #define	P0_EN_2V5_LBN 2
 #define	P0_EN_2V5_WIDTH 1
 #define	P0_EN_3V3X_LBN 3
 #define	P0_EN_3V3X_WIDTH 1
 #define	P0_EN_5V_LBN 4
 #define	P0_EN_5V_WIDTH 1
 #define	P0_SHORTEN_JTAG_LBN 5
 #define	P0_SHORTEN_JTAG_WIDTH 1
 #define	P0_X_TRST_LBN 6
 #define	P0_X_TRST_WIDTH 1
 #define	P0_DSP_RESET_LBN 7
 #define	P0_DSP_RESET_WIDTH 1

 #define	P1_IN 0x01
 #define	P1_OUT 0x03
 #define	P1_INVERT 0x05
 #define	P1_CONFIG 0x07

 #define	P1_AFE_PWD_LBN 0
 #define	P1_AFE_PWD_WIDTH 1
 #define	P1_DSP_PWD25_LBN 1
 #define	P1_DSP_PWD25_WIDTH 1
 #define	P1_RESERVED_LBN 2
 #define	P1_RESERVED_WIDTH 2
 #define	P1_SPARE_LBN 4
 #define	P1_SPARE_WIDTH 4


 /**************************************************************************
  *
  * Temperature Sensor
  *
  **************************************************************************/
 #define	MAX6647	0x4e

 #define	RLTS	0x00
 #define	RLTE	0x01
 #define	RSL	0x02
 #define	RCL	0x03
 #define	RCRA	0x04
 #define	RLHN	0x05
 #define	RLLI	0x06
 #define	RRHI	0x07
 #define	RRLS	0x08
 #define	WCRW	0x0a
 #define	WLHO	0x0b
 #define	WRHA	0x0c
 #define	WRLN	0x0e
 #define	OSHT	0x0f
 #define	REET	0x10
 #define	RIET	0x11
 #define	RWOE	0x19
 #define	RWOI	0x20
 #define	HYS	0x21
 #define	QUEUE	0x22
 #define	MFID	0xfe
 #define	REVID	0xff

 /* Status bits */
 #define MAX6647_BUSY	(1 << 7)	/* ADC is converting */
 #define MAX6647_LHIGH	(1 << 6)	/* Local high temp. alarm */
 #define MAX6647_LLOW	(1 << 5)	/* Local low temp. alarm */
 #define MAX6647_RHIGH	(1 << 4)	/* Remote high temp. alarm */
 #define MAX6647_RLOW	(1 << 3)	/* Remote low temp. alarm */
 #define MAX6647_FAULT	(1 << 2)	/* DXN/DXP short/open circuit */
 #define MAX6647_EOT	(1 << 1)	/* Remote junction overtemp. */
 #define MAX6647_IOT	(1 << 0)	/* Local junction overtemp. */

 static const u8 xgphy_max_temperature = 90;

 static void sfe4001_poweroff(struct efx_nic *efx)
 {
 	struct i2c_client *ioexp_client = efx->board_info.ioexp_client;
 	struct i2c_client *hwmon_client = efx->board_info.hwmon_client;

 	/* Turn off all power rails and disable outputs */
 	i2c_smbus_write_byte_data(ioexp_client, P0_OUT, 0xff);
 	i2c_smbus_write_byte_data(ioexp_client, P1_CONFIG, 0xff);
 	i2c_smbus_write_byte_data(ioexp_client, P0_CONFIG, 0xff);

 	/* Clear any over-temperature alert */
 	i2c_smbus_read_byte_data(hwmon_client, RSL);
 }

 static int sfe4001_poweron(struct efx_nic *efx)
 {
 	struct i2c_client *hwmon_client = efx->board_info.hwmon_client;
 	struct i2c_client *ioexp_client = efx->board_info.ioexp_client;
 	unsigned int i, j;
 	int rc;
 	u8 out;

 	/* Clear any previous over-temperature alert */
 	rc = i2c_smbus_read_byte_data(hwmon_client, RSL);
 	if (rc < 0)
 		return rc;

 	/* Enable port 0 and port 1 outputs on IO expander */
 	rc = i2c_smbus_write_byte_data(ioexp_client, P0_CONFIG, 0x00);
 	if (rc)
 		return rc;
 	rc = i2c_smbus_write_byte_data(ioexp_client, P1_CONFIG,
 				       0xff & ~(1 << P1_SPARE_LBN));
 	if (rc)
 		goto fail_on;

 	/* If PHY power is on, turn it all off and wait 1 second to
 	 * ensure a full reset.
 	 */
 	rc = i2c_smbus_read_byte_data(ioexp_client, P0_OUT);
 	if (rc < 0)
 		goto fail_on;
 	out = 0xff & ~((0 << P0_EN_1V2_LBN) | (0 << P0_EN_2V5_LBN) |
 		       (0 << P0_EN_3V3X_LBN) | (0 << P0_EN_5V_LBN) |
 		       (0 << P0_EN_1V0X_LBN));
 	if (rc != out) {
 		EFX_INFO(efx, "power-cycling PHY\n");
 		rc = i2c_smbus_write_byte_data(ioexp_client, P0_OUT, out);
 		if (rc)
 			goto fail_on;
 		schedule_timeout_uninterruptible(HZ);
 	}

 	for (i = 0; i < 20; ++i) {
 		/* Turn on 1.2V, 2.5V, 3.3V and 5V power rails */
 		out = 0xff & ~((1 << P0_EN_1V2_LBN) | (1 << P0_EN_2V5_LBN) |
 			       (1 << P0_EN_3V3X_LBN) | (1 << P0_EN_5V_LBN) |
 			       (1 << P0_X_TRST_LBN));
 		if (efx->phy_mode & PHY_MODE_SPECIAL)
 			out |= 1 << P0_EN_3V3X_LBN;

 		rc = i2c_smbus_write_byte_data(ioexp_client, P0_OUT, out);
 		if (rc)
 			goto fail_on;
 		msleep(10);

 		/* Turn on 1V power rail */
 		out &= ~(1 << P0_EN_1V0X_LBN);
 		rc = i2c_smbus_write_byte_data(ioexp_client, P0_OUT, out);
 		if (rc)
 			goto fail_on;

 		EFX_INFO(efx, "waiting for DSP boot (attempt %d)...\n", i);

 		/* In flash config mode, DSP does not turn on AFE, so
 		 * just wait 1 second.
 		 */
 		if (efx->phy_mode & PHY_MODE_SPECIAL) {
 			schedule_timeout_uninterruptible(HZ);
 			return 0;
 		}

 		for (j = 0; j < 10; ++j) {
 			msleep(100);

 			/* Check DSP has asserted AFE power line */
 			rc = i2c_smbus_read_byte_data(ioexp_client, P1_IN);
 			if (rc < 0)
 				goto fail_on;
 			if (rc & (1 << P1_AFE_PWD_LBN))
 				return 0;
 		}
 	}

 	EFX_INFO(efx, "timed out waiting for DSP boot\n");
 	rc = -ETIMEDOUT;
 fail_on:
 	sfe4001_poweroff(efx);
 	return rc;
 }

 /* On SFE4001 rev A2 and later, we can control the FLASH_CFG_1 pin
  * using the 3V3X output of the IO-expander.  Allow the user to set
  * this when the device is stopped, and keep it stopped then.
  */

 static ssize_t show_phy_flash_cfg(struct device *dev,
 				  struct device_attribute *attr, char *buf)
 {
 	struct efx_nic *efx = pci_get_drvdata(to_pci_dev(dev));
 	return sprintf(buf, "%d\n", !!(efx->phy_mode & PHY_MODE_SPECIAL));
 }

 static ssize_t set_phy_flash_cfg(struct device *dev,
 				 struct device_attribute *attr,
 				 const char *buf, size_t count)
 {
 	struct efx_nic *efx = pci_get_drvdata(to_pci_dev(dev));
 	enum efx_phy_mode old_mode, new_mode;
 	int err;

 	rtnl_lock();
 	old_mode = efx->phy_mode;
 	if (count == 0 || *buf == '0')
 		new_mode = old_mode & ~PHY_MODE_SPECIAL;
 	else
 		new_mode = PHY_MODE_SPECIAL;
 	if (old_mode == new_mode) {
 		err = 0;
 	} else if (efx->state != STATE_RUNNING || netif_running(efx->net_dev)) {
 		err = -EBUSY;
 	} else {
 		efx->phy_mode = new_mode;
 		err = sfe4001_poweron(efx);
 		efx_reconfigure_port(efx);
 	}
 	rtnl_unlock();

 	return err ? err : count;
 }

 static DEVICE_ATTR(phy_flash_cfg, 0644, show_phy_flash_cfg, set_phy_flash_cfg);

 static void sfe4001_fini(struct efx_nic *efx)
 {
 	EFX_INFO(efx, "%s\n", __func__);

 	device_remove_file(&efx->pci_dev->dev, &dev_attr_phy_flash_cfg);
 	sfe4001_poweroff(efx);
 	i2c_unregister_device(efx->board_info.ioexp_client);
 	i2c_unregister_device(efx->board_info.hwmon_client);
 }

 /* This board uses an I2C expander to provider power to the PHY, which needs to
  * be turned on before the PHY can be used.
  * Context: Process context, rtnl lock held
  */
 int sfe4001_init(struct efx_nic *efx)
 {
 	struct i2c_client *hwmon_client;
 	int rc;

 	hwmon_client = i2c_new_dummy(&efx->i2c_adap, MAX6647);
 	if (!hwmon_client)
 		return -EIO;
 	efx->board_info.hwmon_client = hwmon_client;

 	/* Set DSP over-temperature alert threshold */
 	EFX_INFO(efx, "DSP cut-out at %dC\n", xgphy_max_temperature);
 	rc = i2c_smbus_write_byte_data(hwmon_client, WLHO,
 				       xgphy_max_temperature);
 	if (rc)
 		goto fail_ioexp;

 	/* Read it back and verify */
 	rc = i2c_smbus_read_byte_data(hwmon_client, RLHN);
 	if (rc < 0)
 		goto fail_ioexp;
 	if (rc != xgphy_max_temperature) {
 		rc = -EFAULT;
 		goto fail_ioexp;
 	}

 	efx->board_info.ioexp_client = i2c_new_dummy(&efx->i2c_adap, PCA9539);
 	if (!efx->board_info.ioexp_client) {
 		rc = -EIO;
 		goto fail_hwmon;
 	}

 	/* 10Xpress has fixed-function LED pins, so there is no board-specific
 	 * blink code. */
 	efx->board_info.blink = tenxpress_phy_blink;

 	efx->board_info.fini = sfe4001_fini;

 	rc = sfe4001_poweron(efx);
 	if (rc)
 		goto fail_ioexp;

 	rc = device_create_file(&efx->pci_dev->dev, &dev_attr_phy_flash_cfg);
 	if (rc)
 		goto fail_on;

 	EFX_INFO(efx, "PHY is powered on\n");
 	return 0;

 fail_on:
 	sfe4001_poweroff(efx);
 fail_ioexp:
 	i2c_unregister_device(efx->board_info.ioexp_client);
 fail_hwmon:
 	i2c_unregister_device(hwmon_client);
 	return rc;
 }
	/****************************************************************************
	* Driver for Solarflare Solarstorm network controllers and boards
	* Copyright 2007 Solarflare Communications Inc.
	*
	* This program is free software; you can redistribute it and/or modify it
	* under the terms of the GNU General Public License version 2 as published
	* by the Free Software Foundation, incorporated herein by reference.
	*/

	/*****************************************************************************
	* Support for the SFE4001 NIC: driver code for the PCA9539 I/O expander that
	* controls the PHY power rails, and for the MAX6647 temp. sensor used to check
	* the PHY
	*/
	#include <linux/delay.h>
	#include "net_driver.h"
	#include "efx.h"
	#include "phy.h"
	#include "boards.h"
	#include "falcon.h"
	#include "falcon_hwdefs.h"
	#include "falcon_io.h"
	#include "mac.h"

	/**************************************************************************
	*
	* I2C IO Expander device
	*
	**************************************************************************/
	#define PCA9539 0x74

	#define P0_IN 0x00
	#define P0_OUT 0x02
	#define P0_INVERT 0x04
	#define P0_CONFIG 0x06

	#define P0_EN_1V0X_LBN 0
	#define P0_EN_1V0X_WIDTH 1
	#define P0_EN_1V2_LBN 1
	#define P0_EN_1V2_WIDTH 1
	#define P0_EN_2V5_LBN 2
	#define P0_EN_2V5_WIDTH 1
	#define P0_EN_3V3X_LBN 3
	#define P0_EN_3V3X_WIDTH 1
	#define P0_EN_5V_LBN 4
	#define P0_EN_5V_WIDTH 1
	#define P0_SHORTEN_JTAG_LBN 5
	#define P0_SHORTEN_JTAG_WIDTH 1
	#define P0_X_TRST_LBN 6
	#define P0_X_TRST_WIDTH 1
	#define P0_DSP_RESET_LBN 7
	#define P0_DSP_RESET_WIDTH 1

	#define P1_IN 0x01
	#define P1_OUT 0x03
	#define P1_INVERT 0x05
	#define P1_CONFIG 0x07

	#define P1_AFE_PWD_LBN 0
	#define P1_AFE_PWD_WIDTH 1
	#define P1_DSP_PWD25_LBN 1
	#define P1_DSP_PWD25_WIDTH 1
	#define P1_RESERVED_LBN 2
	#define P1_RESERVED_WIDTH 2
	#define P1_SPARE_LBN 4
	#define P1_SPARE_WIDTH 4


	/**************************************************************************
	*
	* Temperature Sensor
	*
	**************************************************************************/
	#define MAX6647 0x4e

	#define RLTS 0x00
	#define RLTE 0x01
	#define RSL 0x02
	#define RCL 0x03
	#define RCRA 0x04
	#define RLHN 0x05
	#define RLLI 0x06
	#define RRHI 0x07
	#define RRLS 0x08
	#define WCRW 0x0a
	#define WLHO 0x0b
	#define WRHA 0x0c
	#define WRLN 0x0e
	#define OSHT 0x0f
	#define REET 0x10
	#define RIET 0x11
	#define RWOE 0x19
	#define RWOI 0x20
	#define HYS 0x21
	#define QUEUE 0x22
	#define MFID 0xfe
	#define REVID 0xff

	/* Status bits */
	#define MAX6647_BUSY (1 << 7) /* ADC is converting */
	#define MAX6647_LHIGH (1 << 6) /* Local high temp. alarm */
	#define MAX6647_LLOW (1 << 5) /* Local low temp. alarm */
	#define MAX6647_RHIGH (1 << 4) /* Remote high temp. alarm */
	#define MAX6647_RLOW (1 << 3) /* Remote low temp. alarm */
	#define MAX6647_FAULT (1 << 2) /* DXN/DXP short/open circuit */
	#define MAX6647_EOT (1 << 1) /* Remote junction overtemp. */
	#define MAX6647_IOT (1 << 0) /* Local junction overtemp. */

	static const u8 xgphy_max_temperature = 90;

	static void sfe4001_poweroff(struct efx_nic *efx)
	{
	struct i2c_client *ioexp_client = efx->board_info.ioexp_client;
	struct i2c_client *hwmon_client = efx->board_info.hwmon_client;

	/* Turn off all power rails and disable outputs */
	i2c_smbus_write_byte_data(ioexp_client, P0_OUT, 0xff);
	i2c_smbus_write_byte_data(ioexp_client, P1_CONFIG, 0xff);
	i2c_smbus_write_byte_data(ioexp_client, P0_CONFIG, 0xff);

	/* Clear any over-temperature alert */
	i2c_smbus_read_byte_data(hwmon_client, RSL);
	}

	static int sfe4001_poweron(struct efx_nic *efx)
	{
	struct i2c_client *hwmon_client = efx->board_info.hwmon_client;
	struct i2c_client *ioexp_client = efx->board_info.ioexp_client;
	unsigned int i, j;
	int rc;
	u8 out;

	/* Clear any previous over-temperature alert */
	rc = i2c_smbus_read_byte_data(hwmon_client, RSL);
	if (rc < 0)
	return rc;

	/* Enable port 0 and port 1 outputs on IO expander */
	rc = i2c_smbus_write_byte_data(ioexp_client, P0_CONFIG, 0x00);
	if (rc)
	return rc;
	rc = i2c_smbus_write_byte_data(ioexp_client, P1_CONFIG,
	0xff & ~(1 << P1_SPARE_LBN));
	if (rc)
	goto fail_on;

	/* If PHY power is on, turn it all off and wait 1 second to
	* ensure a full reset.
	*/
	rc = i2c_smbus_read_byte_data(ioexp_client, P0_OUT);
	if (rc < 0)
	goto fail_on;
	out = 0xff & ~((0 << P0_EN_1V2_LBN) \| (0 << P0_EN_2V5_LBN) \|
	(0 << P0_EN_3V3X_LBN) \| (0 << P0_EN_5V_LBN) \|
	(0 << P0_EN_1V0X_LBN));
	if (rc != out) {
	EFX_INFO(efx, "power-cycling PHY\n");
	rc = i2c_smbus_write_byte_data(ioexp_client, P0_OUT, out);
	if (rc)
	goto fail_on;
	schedule_timeout_uninterruptible(HZ);
	}

	for (i = 0; i < 20; ++i) {
	/* Turn on 1.2V, 2.5V, 3.3V and 5V power rails */
	out = 0xff & ~((1 << P0_EN_1V2_LBN) \| (1 << P0_EN_2V5_LBN) \|
	(1 << P0_EN_3V3X_LBN) \| (1 << P0_EN_5V_LBN) \|
	(1 << P0_X_TRST_LBN));
	if (efx->phy_mode & PHY_MODE_SPECIAL)
	out \|= 1 << P0_EN_3V3X_LBN;

	rc = i2c_smbus_write_byte_data(ioexp_client, P0_OUT, out);
	if (rc)
	goto fail_on;
	msleep(10);

	/* Turn on 1V power rail */
	out &= ~(1 << P0_EN_1V0X_LBN);
	rc = i2c_smbus_write_byte_data(ioexp_client, P0_OUT, out);
	if (rc)
	goto fail_on;

	EFX_INFO(efx, "waiting for DSP boot (attempt %d)...\n", i);

	/* In flash config mode, DSP does not turn on AFE, so
	* just wait 1 second.
	*/
	if (efx->phy_mode & PHY_MODE_SPECIAL) {
	schedule_timeout_uninterruptible(HZ);
	return 0;
	}

	for (j = 0; j < 10; ++j) {
	msleep(100);

	/* Check DSP has asserted AFE power line */
	rc = i2c_smbus_read_byte_data(ioexp_client, P1_IN);
	if (rc < 0)
	goto fail_on;
	if (rc & (1 << P1_AFE_PWD_LBN))
	return 0;
	}
	}

	EFX_INFO(efx, "timed out waiting for DSP boot\n");
	rc = -ETIMEDOUT;
	fail_on:
	sfe4001_poweroff(efx);
	return rc;
	}

	/* On SFE4001 rev A2 and later, we can control the FLASH_CFG_1 pin
	* using the 3V3X output of the IO-expander. Allow the user to set
	* this when the device is stopped, and keep it stopped then.
	*/

	static ssize_t show_phy_flash_cfg(struct device *dev,
	struct device_attribute attr, char buf)
	{
	struct efx_nic *efx = pci_get_drvdata(to_pci_dev(dev));
	return sprintf(buf, "%d\n", !!(efx->phy_mode & PHY_MODE_SPECIAL));
	}

	static ssize_t set_phy_flash_cfg(struct device *dev,
	struct device_attribute *attr,
	const char *buf, size_t count)
	{
	struct efx_nic *efx = pci_get_drvdata(to_pci_dev(dev));
	enum efx_phy_mode old_mode, new_mode;
	int err;

	rtnl_lock();
	old_mode = efx->phy_mode;
	if (count == 0 \|\| *buf == '0')
	new_mode = old_mode & ~PHY_MODE_SPECIAL;
	else
	new_mode = PHY_MODE_SPECIAL;
	if (old_mode == new_mode) {
	err = 0;
	} else if (efx->state != STATE_RUNNING \|\| netif_running(efx->net_dev)) {
	err = -EBUSY;
	} else {
	efx->phy_mode = new_mode;
	err = sfe4001_poweron(efx);
	efx_reconfigure_port(efx);
	}
	rtnl_unlock();

	return err ? err : count;
	}

	static DEVICE_ATTR(phy_flash_cfg, 0644, show_phy_flash_cfg, set_phy_flash_cfg);

	static void sfe4001_fini(struct efx_nic *efx)
	{
	EFX_INFO(efx, "%s\n", __func__);

	device_remove_file(&efx->pci_dev->dev, &dev_attr_phy_flash_cfg);
	sfe4001_poweroff(efx);
	i2c_unregister_device(efx->board_info.ioexp_client);
	i2c_unregister_device(efx->board_info.hwmon_client);
	}

	/* This board uses an I2C expander to provider power to the PHY, which needs to
	* be turned on before the PHY can be used.
	* Context: Process context, rtnl lock held
	*/
	int sfe4001_init(struct efx_nic *efx)
	{
	struct i2c_client *hwmon_client;
	int rc;

	hwmon_client = i2c_new_dummy(&efx->i2c_adap, MAX6647);
	if (!hwmon_client)
	return -EIO;
	efx->board_info.hwmon_client = hwmon_client;

	/* Set DSP over-temperature alert threshold */
	EFX_INFO(efx, "DSP cut-out at %dC\n", xgphy_max_temperature);
	rc = i2c_smbus_write_byte_data(hwmon_client, WLHO,
	xgphy_max_temperature);
	if (rc)
	goto fail_ioexp;

	/* Read it back and verify */
	rc = i2c_smbus_read_byte_data(hwmon_client, RLHN);
	if (rc < 0)
	goto fail_ioexp;
	if (rc != xgphy_max_temperature) {
	rc = -EFAULT;
	goto fail_ioexp;
	}

	efx->board_info.ioexp_client = i2c_new_dummy(&efx->i2c_adap, PCA9539);
	if (!efx->board_info.ioexp_client) {
	rc = -EIO;
	goto fail_hwmon;
	}

	/* 10Xpress has fixed-function LED pins, so there is no board-specific
	* blink code. */
	efx->board_info.blink = tenxpress_phy_blink;

	efx->board_info.fini = sfe4001_fini;

	rc = sfe4001_poweron(efx);
	if (rc)
	goto fail_ioexp;

	rc = device_create_file(&efx->pci_dev->dev, &dev_attr_phy_flash_cfg);
	if (rc)
	goto fail_on;

	EFX_INFO(efx, "PHY is powered on\n");
	return 0;

	fail_on:
	sfe4001_poweroff(efx);
	fail_ioexp:
	i2c_unregister_device(efx->board_info.ioexp_client);
	fail_hwmon:
	i2c_unregister_device(hwmon_client);
	return rc;
	}