| /* |
| * GPL HEADER START |
| * |
| * DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 only, |
| * as published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful, but |
| * WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU |
| * General Public License version 2 for more details (a copy is included |
| * in the LICENSE file that accompanied this code). |
| * |
| * You should have received a copy of the GNU General Public License |
| * version 2 along with this program; If not, see |
| * http://www.sun.com/software/products/lustre/docs/GPLv2.pdf |
| * |
| * Please contact Sun Microsystems, Inc., 4150 Network Circle, Santa Clara, |
| * CA 95054 USA or visit www.sun.com if you need additional information or |
| * have any questions. |
| * |
| * GPL HEADER END |
| */ |
| /* |
| * Copyright (c) 2007, 2010, Oracle and/or its affiliates. All rights reserved. |
| * Use is subject to license terms. |
| * |
| * Copyright (c) 2011, 2012, Intel Corporation. |
| */ |
| /* |
| * This file is part of Lustre, http://www.lustre.org/ |
| * Lustre is a trademark of Sun Microsystems, Inc. |
| * |
| * lustre/include/lustre_lib.h |
| * |
| * Basic Lustre library routines. |
| */ |
| |
| #ifndef _LUSTRE_LIB_H |
| #define _LUSTRE_LIB_H |
| |
| /** \defgroup lib lib |
| * |
| * @{ |
| */ |
| |
| #include <linux/libcfs/libcfs.h> |
| #include <lustre/lustre_idl.h> |
| #include <lustre_ver.h> |
| #include <lustre_cfg.h> |
| #include <linux/lustre_lib.h> |
| |
| /* target.c */ |
| struct ptlrpc_request; |
| struct obd_export; |
| struct lu_target; |
| struct l_wait_info; |
| #include <lustre_ha.h> |
| #include <lustre_net.h> |
| #include <lvfs.h> |
| |
| |
| int target_pack_pool_reply(struct ptlrpc_request *req); |
| int do_set_info_async(struct obd_import *imp, |
| int opcode, int version, |
| obd_count keylen, void *key, |
| obd_count vallen, void *val, |
| struct ptlrpc_request_set *set); |
| |
| #define OBD_RECOVERY_MAX_TIME (obd_timeout * 18) /* b13079 */ |
| #define OBD_MAX_IOCTL_BUFFER CONFIG_LUSTRE_OBD_MAX_IOCTL_BUFFER |
| |
| void target_send_reply(struct ptlrpc_request *req, int rc, int fail_id); |
| |
| /* client.c */ |
| |
| int client_sanobd_setup(struct obd_device *obddev, struct lustre_cfg* lcfg); |
| struct client_obd *client_conn2cli(struct lustre_handle *conn); |
| |
| struct md_open_data; |
| struct obd_client_handle { |
| struct lustre_handle och_fh; |
| struct lu_fid och_fid; |
| struct md_open_data *och_mod; |
| __u32 och_magic; |
| int och_flags; |
| }; |
| #define OBD_CLIENT_HANDLE_MAGIC 0xd15ea5ed |
| |
| /* statfs_pack.c */ |
| void statfs_pack(struct obd_statfs *osfs, struct kstatfs *sfs); |
| void statfs_unpack(struct kstatfs *sfs, struct obd_statfs *osfs); |
| |
| /* l_lock.c */ |
| struct lustre_lock { |
| int l_depth; |
| task_t *l_owner; |
| struct semaphore l_sem; |
| spinlock_t l_spin; |
| }; |
| |
| void l_lock_init(struct lustre_lock *); |
| void l_lock(struct lustre_lock *); |
| void l_unlock(struct lustre_lock *); |
| int l_has_lock(struct lustre_lock *); |
| |
| /* |
| * For md echo client |
| */ |
| enum md_echo_cmd { |
| ECHO_MD_CREATE = 1, /* Open/Create file on MDT */ |
| ECHO_MD_MKDIR = 2, /* Mkdir on MDT */ |
| ECHO_MD_DESTROY = 3, /* Unlink file on MDT */ |
| ECHO_MD_RMDIR = 4, /* Rmdir on MDT */ |
| ECHO_MD_LOOKUP = 5, /* Lookup on MDT */ |
| ECHO_MD_GETATTR = 6, /* Getattr on MDT */ |
| ECHO_MD_SETATTR = 7, /* Setattr on MDT */ |
| ECHO_MD_ALLOC_FID = 8, /* Get FIDs from MDT */ |
| }; |
| |
| /* |
| * OBD IOCTLS |
| */ |
| #define OBD_IOCTL_VERSION 0x00010004 |
| |
| struct obd_ioctl_data { |
| __u32 ioc_len; |
| __u32 ioc_version; |
| |
| union { |
| __u64 ioc_cookie; |
| __u64 ioc_u64_1; |
| }; |
| union { |
| __u32 ioc_conn1; |
| __u32 ioc_u32_1; |
| }; |
| union { |
| __u32 ioc_conn2; |
| __u32 ioc_u32_2; |
| }; |
| |
| struct obdo ioc_obdo1; |
| struct obdo ioc_obdo2; |
| |
| obd_size ioc_count; |
| obd_off ioc_offset; |
| __u32 ioc_dev; |
| __u32 ioc_command; |
| |
| __u64 ioc_nid; |
| __u32 ioc_nal; |
| __u32 ioc_type; |
| |
| /* buffers the kernel will treat as user pointers */ |
| __u32 ioc_plen1; |
| char *ioc_pbuf1; |
| __u32 ioc_plen2; |
| char *ioc_pbuf2; |
| |
| /* inline buffers for various arguments */ |
| __u32 ioc_inllen1; |
| char *ioc_inlbuf1; |
| __u32 ioc_inllen2; |
| char *ioc_inlbuf2; |
| __u32 ioc_inllen3; |
| char *ioc_inlbuf3; |
| __u32 ioc_inllen4; |
| char *ioc_inlbuf4; |
| |
| char ioc_bulk[0]; |
| }; |
| |
| struct obd_ioctl_hdr { |
| __u32 ioc_len; |
| __u32 ioc_version; |
| }; |
| |
| static inline int obd_ioctl_packlen(struct obd_ioctl_data *data) |
| { |
| int len = cfs_size_round(sizeof(struct obd_ioctl_data)); |
| len += cfs_size_round(data->ioc_inllen1); |
| len += cfs_size_round(data->ioc_inllen2); |
| len += cfs_size_round(data->ioc_inllen3); |
| len += cfs_size_round(data->ioc_inllen4); |
| return len; |
| } |
| |
| |
| static inline int obd_ioctl_is_invalid(struct obd_ioctl_data *data) |
| { |
| if (data->ioc_len > (1<<30)) { |
| CERROR("OBD ioctl: ioc_len larger than 1<<30\n"); |
| return 1; |
| } |
| if (data->ioc_inllen1 > (1<<30)) { |
| CERROR("OBD ioctl: ioc_inllen1 larger than 1<<30\n"); |
| return 1; |
| } |
| if (data->ioc_inllen2 > (1<<30)) { |
| CERROR("OBD ioctl: ioc_inllen2 larger than 1<<30\n"); |
| return 1; |
| } |
| if (data->ioc_inllen3 > (1<<30)) { |
| CERROR("OBD ioctl: ioc_inllen3 larger than 1<<30\n"); |
| return 1; |
| } |
| if (data->ioc_inllen4 > (1<<30)) { |
| CERROR("OBD ioctl: ioc_inllen4 larger than 1<<30\n"); |
| return 1; |
| } |
| if (data->ioc_inlbuf1 && !data->ioc_inllen1) { |
| CERROR("OBD ioctl: inlbuf1 pointer but 0 length\n"); |
| return 1; |
| } |
| if (data->ioc_inlbuf2 && !data->ioc_inllen2) { |
| CERROR("OBD ioctl: inlbuf2 pointer but 0 length\n"); |
| return 1; |
| } |
| if (data->ioc_inlbuf3 && !data->ioc_inllen3) { |
| CERROR("OBD ioctl: inlbuf3 pointer but 0 length\n"); |
| return 1; |
| } |
| if (data->ioc_inlbuf4 && !data->ioc_inllen4) { |
| CERROR("OBD ioctl: inlbuf4 pointer but 0 length\n"); |
| return 1; |
| } |
| if (data->ioc_pbuf1 && !data->ioc_plen1) { |
| CERROR("OBD ioctl: pbuf1 pointer but 0 length\n"); |
| return 1; |
| } |
| if (data->ioc_pbuf2 && !data->ioc_plen2) { |
| CERROR("OBD ioctl: pbuf2 pointer but 0 length\n"); |
| return 1; |
| } |
| if (data->ioc_plen1 && !data->ioc_pbuf1) { |
| CERROR("OBD ioctl: plen1 set but NULL pointer\n"); |
| return 1; |
| } |
| if (data->ioc_plen2 && !data->ioc_pbuf2) { |
| CERROR("OBD ioctl: plen2 set but NULL pointer\n"); |
| return 1; |
| } |
| if (obd_ioctl_packlen(data) > data->ioc_len) { |
| CERROR("OBD ioctl: packlen exceeds ioc_len (%d > %d)\n", |
| obd_ioctl_packlen(data), data->ioc_len); |
| return 1; |
| } |
| return 0; |
| } |
| |
| |
| #include <obd_support.h> |
| |
| /* function defined in lustre/obdclass/<platform>/<platform>-module.c */ |
| int obd_ioctl_getdata(char **buf, int *len, void *arg); |
| int obd_ioctl_popdata(void *arg, void *data, int len); |
| |
| static inline void obd_ioctl_freedata(char *buf, int len) |
| { |
| ENTRY; |
| |
| OBD_FREE_LARGE(buf, len); |
| EXIT; |
| return; |
| } |
| |
| /* |
| * BSD ioctl description: |
| * #define IOC_V1 _IOR(g, n1, long) |
| * #define IOC_V2 _IOW(g, n2, long) |
| * |
| * ioctl(f, IOC_V1, arg); |
| * arg will be treated as a long value, |
| * |
| * ioctl(f, IOC_V2, arg) |
| * arg will be treated as a pointer, bsd will call |
| * copyin(buf, arg, sizeof(long)) |
| * |
| * To make BSD ioctl handles argument correctly and simplely, |
| * we change _IOR to _IOWR so BSD will copyin obd_ioctl_data |
| * for us. Does this change affect Linux? (XXX Liang) |
| */ |
| #define OBD_IOC_CREATE _IOWR('f', 101, OBD_IOC_DATA_TYPE) |
| #define OBD_IOC_DESTROY _IOW ('f', 104, OBD_IOC_DATA_TYPE) |
| #define OBD_IOC_PREALLOCATE _IOWR('f', 105, OBD_IOC_DATA_TYPE) |
| |
| #define OBD_IOC_SETATTR _IOW ('f', 107, OBD_IOC_DATA_TYPE) |
| #define OBD_IOC_GETATTR _IOWR ('f', 108, OBD_IOC_DATA_TYPE) |
| #define OBD_IOC_READ _IOWR('f', 109, OBD_IOC_DATA_TYPE) |
| #define OBD_IOC_WRITE _IOWR('f', 110, OBD_IOC_DATA_TYPE) |
| |
| |
| #define OBD_IOC_STATFS _IOWR('f', 113, OBD_IOC_DATA_TYPE) |
| #define OBD_IOC_SYNC _IOW ('f', 114, OBD_IOC_DATA_TYPE) |
| #define OBD_IOC_READ2 _IOWR('f', 115, OBD_IOC_DATA_TYPE) |
| #define OBD_IOC_FORMAT _IOWR('f', 116, OBD_IOC_DATA_TYPE) |
| #define OBD_IOC_PARTITION _IOWR('f', 117, OBD_IOC_DATA_TYPE) |
| #define OBD_IOC_COPY _IOWR('f', 120, OBD_IOC_DATA_TYPE) |
| #define OBD_IOC_MIGR _IOWR('f', 121, OBD_IOC_DATA_TYPE) |
| #define OBD_IOC_PUNCH _IOWR('f', 122, OBD_IOC_DATA_TYPE) |
| |
| #define OBD_IOC_MODULE_DEBUG _IOWR('f', 124, OBD_IOC_DATA_TYPE) |
| #define OBD_IOC_BRW_READ _IOWR('f', 125, OBD_IOC_DATA_TYPE) |
| #define OBD_IOC_BRW_WRITE _IOWR('f', 126, OBD_IOC_DATA_TYPE) |
| #define OBD_IOC_NAME2DEV _IOWR('f', 127, OBD_IOC_DATA_TYPE) |
| #define OBD_IOC_UUID2DEV _IOWR('f', 130, OBD_IOC_DATA_TYPE) |
| |
| #define OBD_IOC_GETNAME _IOWR('f', 131, OBD_IOC_DATA_TYPE) |
| #define OBD_IOC_GETMDNAME _IOR('f', 131, char[MAX_OBD_NAME]) |
| #define OBD_IOC_GETDTNAME OBD_IOC_GETNAME |
| |
| #define OBD_IOC_LOV_GET_CONFIG _IOWR('f', 132, OBD_IOC_DATA_TYPE) |
| #define OBD_IOC_CLIENT_RECOVER _IOW ('f', 133, OBD_IOC_DATA_TYPE) |
| #define OBD_IOC_PING_TARGET _IOW ('f', 136, OBD_IOC_DATA_TYPE) |
| |
| #define OBD_IOC_DEC_FS_USE_COUNT _IO ('f', 139 ) |
| #define OBD_IOC_NO_TRANSNO _IOW ('f', 140, OBD_IOC_DATA_TYPE) |
| #define OBD_IOC_SET_READONLY _IOW ('f', 141, OBD_IOC_DATA_TYPE) |
| #define OBD_IOC_ABORT_RECOVERY _IOR ('f', 142, OBD_IOC_DATA_TYPE) |
| |
| #define OBD_IOC_ROOT_SQUASH _IOWR('f', 143, OBD_IOC_DATA_TYPE) |
| |
| #define OBD_GET_VERSION _IOWR ('f', 144, OBD_IOC_DATA_TYPE) |
| |
| #define OBD_IOC_GSS_SUPPORT _IOWR('f', 145, OBD_IOC_DATA_TYPE) |
| |
| #define OBD_IOC_CLOSE_UUID _IOWR ('f', 147, OBD_IOC_DATA_TYPE) |
| |
| #define OBD_IOC_CHANGELOG_SEND _IOW ('f', 148, OBD_IOC_DATA_TYPE) |
| #define OBD_IOC_GETDEVICE _IOWR ('f', 149, OBD_IOC_DATA_TYPE) |
| #define OBD_IOC_FID2PATH _IOWR ('f', 150, OBD_IOC_DATA_TYPE) |
| /* see also <lustre/lustre_user.h> for ioctls 151-153 */ |
| /* OBD_IOC_LOV_SETSTRIPE: See also LL_IOC_LOV_SETSTRIPE */ |
| #define OBD_IOC_LOV_SETSTRIPE _IOW ('f', 154, OBD_IOC_DATA_TYPE) |
| /* OBD_IOC_LOV_GETSTRIPE: See also LL_IOC_LOV_GETSTRIPE */ |
| #define OBD_IOC_LOV_GETSTRIPE _IOW ('f', 155, OBD_IOC_DATA_TYPE) |
| /* OBD_IOC_LOV_SETEA: See also LL_IOC_LOV_SETEA */ |
| #define OBD_IOC_LOV_SETEA _IOW ('f', 156, OBD_IOC_DATA_TYPE) |
| /* see <lustre/lustre_user.h> for ioctls 157-159 */ |
| /* OBD_IOC_QUOTACHECK: See also LL_IOC_QUOTACHECK */ |
| #define OBD_IOC_QUOTACHECK _IOW ('f', 160, int) |
| /* OBD_IOC_POLL_QUOTACHECK: See also LL_IOC_POLL_QUOTACHECK */ |
| #define OBD_IOC_POLL_QUOTACHECK _IOR ('f', 161, struct if_quotacheck *) |
| /* OBD_IOC_QUOTACTL: See also LL_IOC_QUOTACTL */ |
| #define OBD_IOC_QUOTACTL _IOWR('f', 162, struct if_quotactl) |
| /* see also <lustre/lustre_user.h> for ioctls 163-176 */ |
| #define OBD_IOC_CHANGELOG_REG _IOW ('f', 177, struct obd_ioctl_data) |
| #define OBD_IOC_CHANGELOG_DEREG _IOW ('f', 178, struct obd_ioctl_data) |
| #define OBD_IOC_CHANGELOG_CLEAR _IOW ('f', 179, struct obd_ioctl_data) |
| #define OBD_IOC_RECORD _IOWR('f', 180, OBD_IOC_DATA_TYPE) |
| #define OBD_IOC_ENDRECORD _IOWR('f', 181, OBD_IOC_DATA_TYPE) |
| #define OBD_IOC_PARSE _IOWR('f', 182, OBD_IOC_DATA_TYPE) |
| #define OBD_IOC_DORECORD _IOWR('f', 183, OBD_IOC_DATA_TYPE) |
| #define OBD_IOC_PROCESS_CFG _IOWR('f', 184, OBD_IOC_DATA_TYPE) |
| #define OBD_IOC_DUMP_LOG _IOWR('f', 185, OBD_IOC_DATA_TYPE) |
| #define OBD_IOC_CLEAR_LOG _IOWR('f', 186, OBD_IOC_DATA_TYPE) |
| #define OBD_IOC_PARAM _IOW ('f', 187, OBD_IOC_DATA_TYPE) |
| #define OBD_IOC_POOL _IOWR('f', 188, OBD_IOC_DATA_TYPE) |
| #define OBD_IOC_REPLACE_NIDS _IOWR('f', 189, OBD_IOC_DATA_TYPE) |
| |
| #define OBD_IOC_CATLOGLIST _IOWR('f', 190, OBD_IOC_DATA_TYPE) |
| #define OBD_IOC_LLOG_INFO _IOWR('f', 191, OBD_IOC_DATA_TYPE) |
| #define OBD_IOC_LLOG_PRINT _IOWR('f', 192, OBD_IOC_DATA_TYPE) |
| #define OBD_IOC_LLOG_CANCEL _IOWR('f', 193, OBD_IOC_DATA_TYPE) |
| #define OBD_IOC_LLOG_REMOVE _IOWR('f', 194, OBD_IOC_DATA_TYPE) |
| #define OBD_IOC_LLOG_CHECK _IOWR('f', 195, OBD_IOC_DATA_TYPE) |
| /* OBD_IOC_LLOG_CATINFO is deprecated */ |
| #define OBD_IOC_LLOG_CATINFO _IOWR('f', 196, OBD_IOC_DATA_TYPE) |
| |
| #define ECHO_IOC_GET_STRIPE _IOWR('f', 200, OBD_IOC_DATA_TYPE) |
| #define ECHO_IOC_SET_STRIPE _IOWR('f', 201, OBD_IOC_DATA_TYPE) |
| #define ECHO_IOC_ENQUEUE _IOWR('f', 202, OBD_IOC_DATA_TYPE) |
| #define ECHO_IOC_CANCEL _IOWR('f', 203, OBD_IOC_DATA_TYPE) |
| |
| #define OBD_IOC_GET_OBJ_VERSION _IOR('f', 210, OBD_IOC_DATA_TYPE) |
| |
| /* <lustre/lustre_user.h> defines ioctl number 218-219 */ |
| #define OBD_IOC_GET_MNTOPT _IOW('f', 220, mntopt_t) |
| |
| #define OBD_IOC_ECHO_MD _IOR('f', 221, struct obd_ioctl_data) |
| #define OBD_IOC_ECHO_ALLOC_SEQ _IOWR('f', 222, struct obd_ioctl_data) |
| |
| #define OBD_IOC_START_LFSCK _IOWR('f', 230, OBD_IOC_DATA_TYPE) |
| #define OBD_IOC_STOP_LFSCK _IOW('f', 231, OBD_IOC_DATA_TYPE) |
| #define OBD_IOC_PAUSE_LFSCK _IOW('f', 232, OBD_IOC_DATA_TYPE) |
| |
| /* XXX _IOWR('f', 250, long) has been defined in |
| * libcfs/include/libcfs/libcfs_private.h for debug, don't use it |
| */ |
| |
| /* Until such time as we get_info the per-stripe maximum from the OST, |
| * we define this to be 2T - 4k, which is the ext3 maxbytes. */ |
| #define LUSTRE_STRIPE_MAXBYTES 0x1fffffff000ULL |
| |
| /* Special values for remove LOV EA from disk */ |
| #define LOVEA_DELETE_VALUES(size, count, offset) (size == 0 && count == 0 && \ |
| offset == (typeof(offset))(-1)) |
| |
| /* #define POISON_BULK 0 */ |
| |
| /* |
| * l_wait_event is a flexible sleeping function, permitting simple caller |
| * configuration of interrupt and timeout sensitivity along with actions to |
| * be performed in the event of either exception. |
| * |
| * The first form of usage looks like this: |
| * |
| * struct l_wait_info lwi = LWI_TIMEOUT_INTR(timeout, timeout_handler, |
| * intr_handler, callback_data); |
| * rc = l_wait_event(waitq, condition, &lwi); |
| * |
| * l_wait_event() makes the current process wait on 'waitq' until 'condition' |
| * is TRUE or a "killable" signal (SIGTERM, SIKGILL, SIGINT) is pending. It |
| * returns 0 to signify 'condition' is TRUE, but if a signal wakes it before |
| * 'condition' becomes true, it optionally calls the specified 'intr_handler' |
| * if not NULL, and returns -EINTR. |
| * |
| * If a non-zero timeout is specified, signals are ignored until the timeout |
| * has expired. At this time, if 'timeout_handler' is not NULL it is called. |
| * If it returns FALSE l_wait_event() continues to wait as described above with |
| * signals enabled. Otherwise it returns -ETIMEDOUT. |
| * |
| * LWI_INTR(intr_handler, callback_data) is shorthand for |
| * LWI_TIMEOUT_INTR(0, NULL, intr_handler, callback_data) |
| * |
| * The second form of usage looks like this: |
| * |
| * struct l_wait_info lwi = LWI_TIMEOUT(timeout, timeout_handler); |
| * rc = l_wait_event(waitq, condition, &lwi); |
| * |
| * This form is the same as the first except that it COMPLETELY IGNORES |
| * SIGNALS. The caller must therefore beware that if 'timeout' is zero, or if |
| * 'timeout_handler' is not NULL and returns FALSE, then the ONLY thing that |
| * can unblock the current process is 'condition' becoming TRUE. |
| * |
| * Another form of usage is: |
| * struct l_wait_info lwi = LWI_TIMEOUT_INTERVAL(timeout, interval, |
| * timeout_handler); |
| * rc = l_wait_event(waitq, condition, &lwi); |
| * This is the same as previous case, but condition is checked once every |
| * 'interval' jiffies (if non-zero). |
| * |
| * Subtle synchronization point: this macro does *not* necessary takes |
| * wait-queue spin-lock before returning, and, hence, following idiom is safe |
| * ONLY when caller provides some external locking: |
| * |
| * Thread1 Thread2 |
| * |
| * l_wait_event(&obj->wq, ....); (1) |
| * |
| * wake_up(&obj->wq): (2) |
| * spin_lock(&q->lock); (2.1) |
| * __wake_up_common(q, ...); (2.2) |
| * spin_unlock(&q->lock, flags); (2.3) |
| * |
| * OBD_FREE_PTR(obj); (3) |
| * |
| * As l_wait_event() may "short-cut" execution and return without taking |
| * wait-queue spin-lock, some additional synchronization is necessary to |
| * guarantee that step (3) can begin only after (2.3) finishes. |
| * |
| * XXX nikita: some ptlrpc daemon threads have races of that sort. |
| * |
| */ |
| static inline int back_to_sleep(void *arg) |
| { |
| return 0; |
| } |
| |
| #define LWI_ON_SIGNAL_NOOP ((void (*)(void *))(-1)) |
| |
| struct l_wait_info { |
| cfs_duration_t lwi_timeout; |
| cfs_duration_t lwi_interval; |
| int lwi_allow_intr; |
| int (*lwi_on_timeout)(void *); |
| void (*lwi_on_signal)(void *); |
| void *lwi_cb_data; |
| }; |
| |
| /* NB: LWI_TIMEOUT ignores signals completely */ |
| #define LWI_TIMEOUT(time, cb, data) \ |
| ((struct l_wait_info) { \ |
| .lwi_timeout = time, \ |
| .lwi_on_timeout = cb, \ |
| .lwi_cb_data = data, \ |
| .lwi_interval = 0, \ |
| .lwi_allow_intr = 0 \ |
| }) |
| |
| #define LWI_TIMEOUT_INTERVAL(time, interval, cb, data) \ |
| ((struct l_wait_info) { \ |
| .lwi_timeout = time, \ |
| .lwi_on_timeout = cb, \ |
| .lwi_cb_data = data, \ |
| .lwi_interval = interval, \ |
| .lwi_allow_intr = 0 \ |
| }) |
| |
| #define LWI_TIMEOUT_INTR(time, time_cb, sig_cb, data) \ |
| ((struct l_wait_info) { \ |
| .lwi_timeout = time, \ |
| .lwi_on_timeout = time_cb, \ |
| .lwi_on_signal = sig_cb, \ |
| .lwi_cb_data = data, \ |
| .lwi_interval = 0, \ |
| .lwi_allow_intr = 0 \ |
| }) |
| |
| #define LWI_TIMEOUT_INTR_ALL(time, time_cb, sig_cb, data) \ |
| ((struct l_wait_info) { \ |
| .lwi_timeout = time, \ |
| .lwi_on_timeout = time_cb, \ |
| .lwi_on_signal = sig_cb, \ |
| .lwi_cb_data = data, \ |
| .lwi_interval = 0, \ |
| .lwi_allow_intr = 1 \ |
| }) |
| |
| #define LWI_INTR(cb, data) LWI_TIMEOUT_INTR(0, NULL, cb, data) |
| |
| |
| /* |
| * wait for @condition to become true, but no longer than timeout, specified |
| * by @info. |
| */ |
| #define __l_wait_event(wq, condition, info, ret, l_add_wait) \ |
| do { \ |
| wait_queue_t __wait; \ |
| cfs_duration_t __timeout = info->lwi_timeout; \ |
| sigset_t __blocked; \ |
| int __allow_intr = info->lwi_allow_intr; \ |
| \ |
| ret = 0; \ |
| if (condition) \ |
| break; \ |
| \ |
| init_waitqueue_entry_current(&__wait); \ |
| l_add_wait(&wq, &__wait); \ |
| \ |
| /* Block all signals (just the non-fatal ones if no timeout). */ \ |
| if (info->lwi_on_signal != NULL && (__timeout == 0 || __allow_intr)) \ |
| __blocked = cfs_block_sigsinv(LUSTRE_FATAL_SIGS); \ |
| else \ |
| __blocked = cfs_block_sigsinv(0); \ |
| \ |
| for (;;) { \ |
| unsigned __wstate; \ |
| \ |
| __wstate = info->lwi_on_signal != NULL && \ |
| (__timeout == 0 || __allow_intr) ? \ |
| TASK_INTERRUPTIBLE : TASK_UNINTERRUPTIBLE; \ |
| \ |
| set_current_state(TASK_INTERRUPTIBLE); \ |
| \ |
| if (condition) \ |
| break; \ |
| \ |
| if (__timeout == 0) { \ |
| waitq_wait(&__wait, __wstate); \ |
| } else { \ |
| cfs_duration_t interval = info->lwi_interval? \ |
| min_t(cfs_duration_t, \ |
| info->lwi_interval,__timeout):\ |
| __timeout; \ |
| cfs_duration_t remaining = waitq_timedwait(&__wait,\ |
| __wstate, \ |
| interval); \ |
| __timeout = cfs_time_sub(__timeout, \ |
| cfs_time_sub(interval, remaining));\ |
| if (__timeout == 0) { \ |
| if (info->lwi_on_timeout == NULL || \ |
| info->lwi_on_timeout(info->lwi_cb_data)) { \ |
| ret = -ETIMEDOUT; \ |
| break; \ |
| } \ |
| /* Take signals after the timeout expires. */ \ |
| if (info->lwi_on_signal != NULL) \ |
| (void)cfs_block_sigsinv(LUSTRE_FATAL_SIGS);\ |
| } \ |
| } \ |
| \ |
| if (condition) \ |
| break; \ |
| if (cfs_signal_pending()) { \ |
| if (info->lwi_on_signal != NULL && \ |
| (__timeout == 0 || __allow_intr)) { \ |
| if (info->lwi_on_signal != LWI_ON_SIGNAL_NOOP) \ |
| info->lwi_on_signal(info->lwi_cb_data);\ |
| ret = -EINTR; \ |
| break; \ |
| } \ |
| /* We have to do this here because some signals */ \ |
| /* are not blockable - ie from strace(1). */ \ |
| /* In these cases we want to schedule_timeout() */ \ |
| /* again, because we don't want that to return */ \ |
| /* -EINTR when the RPC actually succeeded. */ \ |
| /* the recalc_sigpending() below will deliver the */ \ |
| /* signal properly. */ \ |
| cfs_clear_sigpending(); \ |
| } \ |
| } \ |
| \ |
| cfs_restore_sigs(__blocked); \ |
| \ |
| set_current_state(TASK_RUNNING); \ |
| remove_wait_queue(&wq, &__wait); \ |
| } while (0) |
| |
| |
| |
| #define l_wait_event(wq, condition, info) \ |
| ({ \ |
| int __ret; \ |
| struct l_wait_info *__info = (info); \ |
| \ |
| __l_wait_event(wq, condition, __info, \ |
| __ret, add_wait_queue); \ |
| __ret; \ |
| }) |
| |
| #define l_wait_event_exclusive(wq, condition, info) \ |
| ({ \ |
| int __ret; \ |
| struct l_wait_info *__info = (info); \ |
| \ |
| __l_wait_event(wq, condition, __info, \ |
| __ret, add_wait_queue_exclusive); \ |
| __ret; \ |
| }) |
| |
| #define l_wait_event_exclusive_head(wq, condition, info) \ |
| ({ \ |
| int __ret; \ |
| struct l_wait_info *__info = (info); \ |
| \ |
| __l_wait_event(wq, condition, __info, \ |
| __ret, add_wait_queue_exclusive_head); \ |
| __ret; \ |
| }) |
| |
| #define l_wait_condition(wq, condition) \ |
| ({ \ |
| struct l_wait_info lwi = { 0 }; \ |
| l_wait_event(wq, condition, &lwi); \ |
| }) |
| |
| #define l_wait_condition_exclusive(wq, condition) \ |
| ({ \ |
| struct l_wait_info lwi = { 0 }; \ |
| l_wait_event_exclusive(wq, condition, &lwi); \ |
| }) |
| |
| #define l_wait_condition_exclusive_head(wq, condition) \ |
| ({ \ |
| struct l_wait_info lwi = { 0 }; \ |
| l_wait_event_exclusive_head(wq, condition, &lwi); \ |
| }) |
| |
| #define LIBLUSTRE_CLIENT (0) |
| |
| /** @} lib */ |
| |
| #endif /* _LUSTRE_LIB_H */ |