| /* |
| * Copyright (c) 2015-2018, The Linux Foundation. All rights reserved. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 and |
| * only version 2 as published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| */ |
| |
| &spmi_bus { |
| |
| qcom,pm8953@0 { |
| compatible = "qcom,spmi-pmic"; |
| reg = <0x0 SPMI_USID>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| |
| pm8953_revid: qcom,revid@100 { |
| compatible = "qcom,qpnp-revid"; |
| reg = <0x100 0x100>; |
| }; |
| |
| qcom,power-on@800 { |
| compatible = "qcom,qpnp-power-on"; |
| reg = <0x800 0x100>; |
| interrupts = <0x0 0x8 0x0 IRQ_TYPE_NONE>, |
| <0x0 0x8 0x1 IRQ_TYPE_NONE>, |
| <0x0 0x8 0x4 IRQ_TYPE_NONE>, |
| <0x0 0x8 0x5 IRQ_TYPE_NONE>; |
| interrupt-names = "kpdpwr", "resin", |
| "resin-bark", "kpdpwr-resin-bark"; |
| qcom,pon-dbc-delay = <15625>; |
| qcom,system-reset; |
| |
| qcom,pon_1 { |
| qcom,pon-type = <0>; |
| qcom,pull-up = <1>; |
| linux,code = <116>; |
| }; |
| |
| qcom,pon_2 { |
| qcom,pon-type = <1>; |
| qcom,pull-up = <1>; |
| linux,code = <114>; |
| }; |
| }; |
| |
| pm8953_tz: qcom,temp-alarm@2400 { |
| compatible = "qcom,qpnp-temp-alarm"; |
| reg = <0x2400 0x100>; |
| interrupts = <0x0 0x24 0x0 IRQ_TYPE_EDGE_RISING>; |
| label = "pm8953_tz"; |
| qcom,channel-num = <8>; |
| qcom,threshold-set = <0>; |
| qcom,temp_alarm-vadc = <&pm8953_vadc>; |
| #thermal-sensor-cells = <0>; |
| }; |
| |
| pm8953_coincell: qcom,coincell@2800 { |
| compatible = "qcom,qpnp-coincell"; |
| reg = <0x2800 0x100>; |
| }; |
| |
| pm8953_mpps: mpps { |
| compatible = "qcom,spmi-mpp"; |
| reg = <0xa000 0x400>; |
| |
| interrupts = <0x0 0xa0 0 IRQ_TYPE_NONE>, |
| <0x0 0xa1 0 IRQ_TYPE_NONE>, |
| <0x0 0xa2 0 IRQ_TYPE_NONE>, |
| <0x0 0xa3 0 IRQ_TYPE_NONE>; |
| interrupt-names = "pm8953_mpp1", "pm8953_mpp2", |
| "pm8953_mpp3", "pm8953_mpp4"; |
| |
| gpio-controller; |
| #gpio-cells = <2>; |
| }; |
| |
| pm8953_gpios: gpios { |
| compatible = "qcom,spmi-gpio"; |
| reg = <0xc000 0x800>; |
| |
| interrupts = <0x0 0xc0 0 IRQ_TYPE_NONE>, |
| <0x0 0xc1 0 IRQ_TYPE_NONE>, |
| <0x0 0xc3 0 IRQ_TYPE_NONE>, |
| <0x0 0xc6 0 IRQ_TYPE_NONE>, |
| <0x0 0xc7 0 IRQ_TYPE_NONE>; |
| interrupt-names = "pm8953_gpio1", "pm8953_gpio2", |
| "pm8953_gpio4", "pm8953_gpio7", |
| "pm8953_gpio8"; |
| |
| gpio-controller; |
| #gpio-cells = <2>; |
| qcom,gpios-disallowed = <3 5 6>; |
| }; |
| |
| pm8953_vadc: vadc@3100 { |
| compatible = "qcom,qpnp-vadc"; |
| reg = <0x3100 0x100>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>; |
| interrupt-names = "eoc-int-en-set"; |
| qcom,adc-bit-resolution = <15>; |
| qcom,adc-vdd-reference = <1800>; |
| qcom,vadc-poll-eoc; |
| #thermal-sensor-cells = <1>; |
| |
| chan@5 { |
| label = "vcoin"; |
| reg = <5>; |
| qcom,decimation = <0>; |
| qcom,pre-div-channel-scaling = <1>; |
| qcom,calibration-type = "absolute"; |
| qcom,scale-function = <0>; |
| qcom,hw-settle-time = <0>; |
| qcom,fast-avg-setup = <0>; |
| }; |
| |
| chan@7 { |
| label = "vph_pwr"; |
| reg = <7>; |
| qcom,decimation = <0>; |
| qcom,pre-div-channel-scaling = <1>; |
| qcom,calibration-type = "absolute"; |
| qcom,scale-function = <0>; |
| qcom,hw-settle-time = <0>; |
| qcom,fast-avg-setup = <0>; |
| }; |
| |
| chan@8 { |
| label = "die_temp"; |
| reg = <8>; |
| qcom,decimation = <0>; |
| qcom,pre-div-channel-scaling = <0>; |
| qcom,calibration-type = "absolute"; |
| qcom,scale-function = <3>; |
| qcom,hw-settle-time = <0>; |
| qcom,fast-avg-setup = <0>; |
| }; |
| |
| chan@9 { |
| label = "ref_625mv"; |
| reg = <9>; |
| qcom,decimation = <0>; |
| qcom,pre-div-channel-scaling = <0>; |
| qcom,calibration-type = "absolute"; |
| qcom,scale-function = <0>; |
| qcom,hw-settle-time = <0>; |
| qcom,fast-avg-setup = <0>; |
| }; |
| |
| chan@a { |
| label = "ref_1250v"; |
| reg = <0xa>; |
| qcom,decimation = <0>; |
| qcom,pre-div-channel-scaling = <0>; |
| qcom,calibration-type = "absolute"; |
| qcom,scale-function = <0>; |
| qcom,hw-settle-time = <0>; |
| qcom,fast-avg-setup = <0>; |
| }; |
| |
| chan@c { |
| label = "ref_buf_625mv"; |
| reg = <0xc>; |
| qcom,decimation = <0>; |
| qcom,pre-div-channel-scaling = <0>; |
| qcom,calibration-type = "absolute"; |
| qcom,scale-function = <0>; |
| qcom,hw-settle-time = <0>; |
| qcom,fast-avg-setup = <0>; |
| }; |
| |
| chan@36 { |
| label = "pa_therm0"; |
| reg = <0x36>; |
| qcom,decimation = <0>; |
| qcom,pre-div-channel-scaling = <0>; |
| qcom,calibration-type = "ratiometric"; |
| qcom,scale-function = <2>; |
| qcom,hw-settle-time = <2>; |
| qcom,fast-avg-setup = <0>; |
| }; |
| |
| chan@11 { |
| label = "pa_therm1"; |
| reg = <0x11>; |
| qcom,decimation = <0>; |
| qcom,pre-div-channel-scaling = <0>; |
| qcom,calibration-type = "ratiometric"; |
| qcom,scale-function = <2>; |
| qcom,hw-settle-time = <2>; |
| qcom,fast-avg-setup = <0>; |
| }; |
| |
| |
| chan@32 { |
| label = "xo_therm"; |
| reg = <0x32>; |
| qcom,decimation = <0>; |
| qcom,pre-div-channel-scaling = <0>; |
| qcom,calibration-type = "ratiometric"; |
| qcom,scale-function = <4>; |
| qcom,hw-settle-time = <2>; |
| qcom,fast-avg-setup = <0>; |
| qcom,vadc-thermal-node; |
| }; |
| |
| chan@3c { |
| label = "xo_therm_buf"; |
| reg = <0x3c>; |
| qcom,decimation = <0>; |
| qcom,pre-div-channel-scaling = <0>; |
| qcom,calibration-type = "ratiometric"; |
| qcom,scale-function = <4>; |
| qcom,hw-settle-time = <2>; |
| qcom,fast-avg-setup = <0>; |
| qcom,vadc-thermal-node; |
| }; |
| chan@13 { |
| label = "case_therm"; |
| reg = <0x13>; |
| qcom,decimation = <0>; |
| qcom,pre-div-channel-scaling = <0>; |
| qcom,calibration-type = "ratiometric"; |
| qcom,scale-function = <2>; |
| qcom,hw-settle-time = <2>; |
| qcom,fast-avg-setup = <0>; |
| }; |
| }; |
| |
| pm8953_adc_tm: vadc@3400 { |
| compatible = "qcom,qpnp-adc-tm"; |
| reg = <0x3400 0x100>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| interrupts = <0x0 0x34 0x0 IRQ_TYPE_EDGE_RISING>, |
| <0x0 0x34 0x3 IRQ_TYPE_EDGE_RISING>, |
| <0x0 0x34 0x4 IRQ_TYPE_EDGE_RISING>; |
| interrupt-names = "eoc-int-en-set", |
| "high-thr-en-set", |
| "low-thr-en-set"; |
| qcom,adc-bit-resolution = <15>; |
| qcom,adc-vdd-reference = <1800>; |
| qcom,adc_tm-vadc = <&pm8953_vadc>; |
| }; |
| |
| pm8953_rtc: qcom,pm8953_rtc { |
| spmi-dev-container; |
| compatible = "qcom,qpnp-rtc"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| qcom,qpnp-rtc-write = <0>; |
| qcom,qpnp-rtc-alarm-pwrup = <0>; |
| |
| qcom,pm8953_rtc_rw@6000 { |
| reg = <0x6000 0x100>; |
| }; |
| |
| qcom,pm8953_rtc_alarm@6100 { |
| reg = <0x6100 0x100>; |
| interrupts = <0x0 0x61 0x1 IRQ_TYPE_NONE>; |
| }; |
| }; |
| |
| pm8953_typec: qcom,pm8953_typec@bf00 { |
| compatible = "qcom,qpnp-typec"; |
| reg = <0xbf00 0x100>; |
| interrupts = <0x0 0xbf 0x0 IRQ_TYPE_EDGE_RISING>, |
| <0x0 0xbf 0x1 IRQ_TYPE_EDGE_RISING>, |
| <0x0 0xbf 0x2 IRQ_TYPE_EDGE_RISING>, |
| <0x0 0xbf 0x3 IRQ_TYPE_EDGE_RISING>, |
| <0x0 0xbf 0x4 IRQ_TYPE_EDGE_RISING>, |
| <0x0 0xbf 0x6 IRQ_TYPE_EDGE_RISING>, |
| <0x0 0xbf 0x7 IRQ_TYPE_EDGE_RISING>; |
| |
| interrupt-names = "vrd-change", |
| "ufp-detect", |
| "ufp-detach", |
| "dfp-detect", |
| "dfp-detach", |
| "vbus-err", |
| "vconn-oc"; |
| }; |
| }; |
| |
| pm8953_1: qcom,pm8953@1 { |
| compatible = "qcom,spmi-pmic"; |
| reg = <0x1 SPMI_USID>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| |
| pm8953_pwm: pwm@bc00 { |
| status = "disabled"; |
| compatible = "qcom,qpnp-pwm"; |
| reg = <0xbc00 0x100>; |
| reg-names = "qpnp-lpg-channel-base"; |
| qcom,channel-id = <0>; |
| qcom,supported-sizes = <6>, <9>; |
| #pwm-cells = <2>; |
| }; |
| }; |
| }; |
| |
| &thermal_zones { |
| xo-therm-adc { |
| polling-delay-passive = <0>; |
| polling-delay = <0>; |
| thermal-sensors = <&pm8953_vadc 0x32>; |
| thermal-governor = "user_space"; |
| |
| trips { |
| active-config0 { |
| temperature = <65000>; |
| hysteresis = <1000>; |
| type = "passive"; |
| }; |
| }; |
| }; |
| |
| xo-therm-buf-adc { |
| polling-delay-passive = <0>; |
| polling-delay = <0>; |
| thermal-sensors = <&pm8953_vadc 0x3c>; |
| thermal-governor = "user_space"; |
| |
| trips { |
| active-config0 { |
| temperature = <65000>; |
| hysteresis = <1000>; |
| type = "passive"; |
| }; |
| }; |
| }; |
| |
| pm8953_tz { |
| polling-delay-passive = <0>; |
| polling-delay = <0>; |
| thermal-sensors = <&pm8953_tz>; |
| |
| trips { |
| pm8953_trip0: pm8953-trip0 { |
| temperature = <105000>; |
| hysteresis = <0>; |
| type = "passive"; |
| }; |
| pm8953_trip1: pm8953-trip1 { |
| temperature = <125000>; |
| hysteresis = <0>; |
| type = "passive"; |
| }; |
| pm8953_trip2: pm8953-trip2 { |
| temperature = <145000>; |
| hysteresis = <0>; |
| type = "passive"; |
| }; |
| }; |
| }; |
| }; |