| /* |
| * File: htirq.c |
| * Purpose: Hypertransport Interrupt Capability |
| * |
| * Copyright (C) 2006 Linux Networx |
| * Copyright (C) Eric Biederman <ebiederman@lnxi.com> |
| */ |
| |
| #include <linux/irq.h> |
| #include <linux/pci.h> |
| #include <linux/spinlock.h> |
| #include <linux/slab.h> |
| #include <linux/gfp.h> |
| #include <linux/htirq.h> |
| |
| /* Global ht irq lock. |
| * |
| * This is needed to serialize access to the data port in hypertransport |
| * irq capability. |
| * |
| * With multiple simultaneous hypertransport irq devices it might pay |
| * to make this more fine grained. But start with simple, stupid, and correct. |
| */ |
| static DEFINE_SPINLOCK(ht_irq_lock); |
| |
| struct ht_irq_cfg { |
| struct pci_dev *dev; |
| unsigned pos; |
| unsigned idx; |
| }; |
| |
| void write_ht_irq_low(unsigned int irq, u32 data) |
| { |
| struct ht_irq_cfg *cfg = get_irq_data(irq); |
| unsigned long flags; |
| spin_lock_irqsave(&ht_irq_lock, flags); |
| pci_write_config_byte(cfg->dev, cfg->pos + 2, cfg->idx); |
| pci_write_config_dword(cfg->dev, cfg->pos + 4, data); |
| spin_unlock_irqrestore(&ht_irq_lock, flags); |
| } |
| |
| void write_ht_irq_high(unsigned int irq, u32 data) |
| { |
| struct ht_irq_cfg *cfg = get_irq_data(irq); |
| unsigned long flags; |
| spin_lock_irqsave(&ht_irq_lock, flags); |
| pci_write_config_byte(cfg->dev, cfg->pos + 2, cfg->idx + 1); |
| pci_write_config_dword(cfg->dev, cfg->pos + 4, data); |
| spin_unlock_irqrestore(&ht_irq_lock, flags); |
| } |
| |
| u32 read_ht_irq_low(unsigned int irq) |
| { |
| struct ht_irq_cfg *cfg = get_irq_data(irq); |
| unsigned long flags; |
| u32 data; |
| spin_lock_irqsave(&ht_irq_lock, flags); |
| pci_write_config_byte(cfg->dev, cfg->pos + 2, cfg->idx); |
| pci_read_config_dword(cfg->dev, cfg->pos + 4, &data); |
| spin_unlock_irqrestore(&ht_irq_lock, flags); |
| return data; |
| } |
| |
| u32 read_ht_irq_high(unsigned int irq) |
| { |
| struct ht_irq_cfg *cfg = get_irq_data(irq); |
| unsigned long flags; |
| u32 data; |
| spin_lock_irqsave(&ht_irq_lock, flags); |
| pci_write_config_byte(cfg->dev, cfg->pos + 2, cfg->idx + 1); |
| pci_read_config_dword(cfg->dev, cfg->pos + 4, &data); |
| spin_unlock_irqrestore(&ht_irq_lock, flags); |
| return data; |
| } |
| |
| void mask_ht_irq(unsigned int irq) |
| { |
| struct ht_irq_cfg *cfg; |
| unsigned long flags; |
| u32 data; |
| |
| cfg = get_irq_data(irq); |
| |
| spin_lock_irqsave(&ht_irq_lock, flags); |
| pci_write_config_byte(cfg->dev, cfg->pos + 2, cfg->idx); |
| pci_read_config_dword(cfg->dev, cfg->pos + 4, &data); |
| data |= 1; |
| pci_write_config_dword(cfg->dev, cfg->pos + 4, data); |
| spin_unlock_irqrestore(&ht_irq_lock, flags); |
| } |
| |
| void unmask_ht_irq(unsigned int irq) |
| { |
| struct ht_irq_cfg *cfg; |
| unsigned long flags; |
| u32 data; |
| |
| cfg = get_irq_data(irq); |
| |
| spin_lock_irqsave(&ht_irq_lock, flags); |
| pci_write_config_byte(cfg->dev, cfg->pos + 2, cfg->idx); |
| pci_read_config_dword(cfg->dev, cfg->pos + 4, &data); |
| data &= ~1; |
| pci_write_config_dword(cfg->dev, cfg->pos + 4, data); |
| spin_unlock_irqrestore(&ht_irq_lock, flags); |
| } |
| |
| /** |
| * ht_create_irq - create an irq and attach it to a device. |
| * @dev: The hypertransport device to find the irq capability on. |
| * @idx: Which of the possible irqs to attach to. |
| * |
| * ht_create_irq is needs to be called for all hypertransport devices |
| * that generate irqs. |
| * |
| * The irq number of the new irq or a negative error value is returned. |
| */ |
| int ht_create_irq(struct pci_dev *dev, int idx) |
| { |
| struct ht_irq_cfg *cfg; |
| unsigned long flags; |
| u32 data; |
| int max_irq; |
| int pos; |
| int irq; |
| |
| pos = pci_find_capability(dev, PCI_CAP_ID_HT); |
| while (pos) { |
| u8 subtype; |
| pci_read_config_byte(dev, pos + 3, &subtype); |
| if (subtype == HT_CAPTYPE_IRQ) |
| break; |
| pos = pci_find_next_capability(dev, pos, PCI_CAP_ID_HT); |
| } |
| if (!pos) |
| return -EINVAL; |
| |
| /* Verify the idx I want to use is in range */ |
| spin_lock_irqsave(&ht_irq_lock, flags); |
| pci_write_config_byte(dev, pos + 2, 1); |
| pci_read_config_dword(dev, pos + 4, &data); |
| spin_unlock_irqrestore(&ht_irq_lock, flags); |
| |
| max_irq = (data >> 16) & 0xff; |
| if ( idx > max_irq) |
| return -EINVAL; |
| |
| cfg = kmalloc(sizeof(*cfg), GFP_KERNEL); |
| if (!cfg) |
| return -ENOMEM; |
| |
| cfg->dev = dev; |
| cfg->pos = pos; |
| cfg->idx = 0x10 + (idx * 2); |
| |
| irq = create_irq(); |
| if (irq < 0) { |
| kfree(cfg); |
| return -EBUSY; |
| } |
| set_irq_data(irq, cfg); |
| |
| if (arch_setup_ht_irq(irq, dev) < 0) { |
| ht_destroy_irq(irq); |
| return -EBUSY; |
| } |
| |
| return irq; |
| } |
| |
| /** |
| * ht_destroy_irq - destroy an irq created with ht_create_irq |
| * |
| * This reverses ht_create_irq removing the specified irq from |
| * existence. The irq should be free before this happens. |
| */ |
| void ht_destroy_irq(unsigned int irq) |
| { |
| struct ht_irq_cfg *cfg; |
| |
| cfg = get_irq_data(irq); |
| set_irq_chip(irq, NULL); |
| set_irq_data(irq, NULL); |
| destroy_irq(irq); |
| |
| kfree(cfg); |
| } |
| |
| EXPORT_SYMBOL(ht_create_irq); |
| EXPORT_SYMBOL(ht_destroy_irq); |