| /* |
| * smdk_spdif.c -- S/PDIF audio for SMDK |
| * |
| * Copyright 2010 Samsung Electronics Co. Ltd. |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License as |
| * published by the Free Software Foundation; either version 2 of the |
| * License, or (at your option) any later version. |
| * |
| */ |
| |
| #include <linux/clk.h> |
| #include <linux/module.h> |
| |
| #include <sound/soc.h> |
| |
| #include "spdif.h" |
| |
| /* Audio clock settings are belonged to board specific part. Every |
| * board can set audio source clock setting which is matched with H/W |
| * like this function-'set_audio_clock_heirachy'. |
| */ |
| static int set_audio_clock_heirachy(struct platform_device *pdev) |
| { |
| struct clk *fout_epll, *mout_epll, *sclk_audio0, *sclk_spdif; |
| int ret = 0; |
| |
| fout_epll = clk_get(NULL, "fout_epll"); |
| if (IS_ERR(fout_epll)) { |
| printk(KERN_WARNING "%s: Cannot find fout_epll.\n", |
| __func__); |
| return -EINVAL; |
| } |
| |
| mout_epll = clk_get(NULL, "mout_epll"); |
| if (IS_ERR(mout_epll)) { |
| printk(KERN_WARNING "%s: Cannot find mout_epll.\n", |
| __func__); |
| ret = -EINVAL; |
| goto out1; |
| } |
| |
| sclk_audio0 = clk_get(&pdev->dev, "sclk_audio"); |
| if (IS_ERR(sclk_audio0)) { |
| printk(KERN_WARNING "%s: Cannot find sclk_audio.\n", |
| __func__); |
| ret = -EINVAL; |
| goto out2; |
| } |
| |
| sclk_spdif = clk_get(NULL, "sclk_spdif"); |
| if (IS_ERR(sclk_spdif)) { |
| printk(KERN_WARNING "%s: Cannot find sclk_spdif.\n", |
| __func__); |
| ret = -EINVAL; |
| goto out3; |
| } |
| |
| /* Set audio clock hierarchy for S/PDIF */ |
| clk_set_parent(mout_epll, fout_epll); |
| clk_set_parent(sclk_audio0, mout_epll); |
| clk_set_parent(sclk_spdif, sclk_audio0); |
| |
| clk_put(sclk_spdif); |
| out3: |
| clk_put(sclk_audio0); |
| out2: |
| clk_put(mout_epll); |
| out1: |
| clk_put(fout_epll); |
| |
| return ret; |
| } |
| |
| /* We should haved to set clock directly on this part because of clock |
| * scheme of Samsudng SoCs did not support to set rates from abstrct |
| * clock of it's hierarchy. |
| */ |
| static int set_audio_clock_rate(unsigned long epll_rate, |
| unsigned long audio_rate) |
| { |
| struct clk *fout_epll, *sclk_spdif; |
| |
| fout_epll = clk_get(NULL, "fout_epll"); |
| if (IS_ERR(fout_epll)) { |
| printk(KERN_ERR "%s: failed to get fout_epll\n", __func__); |
| return -ENOENT; |
| } |
| |
| clk_set_rate(fout_epll, epll_rate); |
| clk_put(fout_epll); |
| |
| sclk_spdif = clk_get(NULL, "sclk_spdif"); |
| if (IS_ERR(sclk_spdif)) { |
| printk(KERN_ERR "%s: failed to get sclk_spdif\n", __func__); |
| return -ENOENT; |
| } |
| |
| clk_set_rate(sclk_spdif, audio_rate); |
| clk_put(sclk_spdif); |
| |
| return 0; |
| } |
| |
| static int smdk_hw_params(struct snd_pcm_substream *substream, |
| struct snd_pcm_hw_params *params) |
| { |
| struct snd_soc_pcm_runtime *rtd = substream->private_data; |
| struct snd_soc_dai *cpu_dai = rtd->cpu_dai; |
| unsigned long pll_out, rclk_rate; |
| int ret, ratio; |
| |
| switch (params_rate(params)) { |
| case 44100: |
| pll_out = 45158400; |
| break; |
| case 32000: |
| case 48000: |
| case 96000: |
| pll_out = 49152000; |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| /* Setting ratio to 512fs helps to use S/PDIF with HDMI without |
| * modify S/PDIF ASoC machine driver. |
| */ |
| ratio = 512; |
| rclk_rate = params_rate(params) * ratio; |
| |
| /* Set audio source clock rates */ |
| ret = set_audio_clock_rate(pll_out, rclk_rate); |
| if (ret < 0) |
| return ret; |
| |
| /* Set S/PDIF uses internal source clock */ |
| ret = snd_soc_dai_set_sysclk(cpu_dai, SND_SOC_SPDIF_INT_MCLK, |
| rclk_rate, SND_SOC_CLOCK_IN); |
| if (ret < 0) |
| return ret; |
| |
| return ret; |
| } |
| |
| static struct snd_soc_ops smdk_spdif_ops = { |
| .hw_params = smdk_hw_params, |
| }; |
| |
| static struct snd_soc_dai_link smdk_dai = { |
| .name = "S/PDIF", |
| .stream_name = "S/PDIF PCM Playback", |
| .platform_name = "samsung-spdif", |
| .cpu_dai_name = "samsung-spdif", |
| .codec_dai_name = "dit-hifi", |
| .codec_name = "spdif-dit", |
| .ops = &smdk_spdif_ops, |
| }; |
| |
| static struct snd_soc_card smdk = { |
| .name = "SMDK-S/PDIF", |
| .owner = THIS_MODULE, |
| .dai_link = &smdk_dai, |
| .num_links = 1, |
| }; |
| |
| static struct platform_device *smdk_snd_spdif_dit_device; |
| static struct platform_device *smdk_snd_spdif_device; |
| |
| static int __init smdk_init(void) |
| { |
| int ret; |
| |
| smdk_snd_spdif_dit_device = platform_device_alloc("spdif-dit", -1); |
| if (!smdk_snd_spdif_dit_device) |
| return -ENOMEM; |
| |
| ret = platform_device_add(smdk_snd_spdif_dit_device); |
| if (ret) |
| goto err1; |
| |
| smdk_snd_spdif_device = platform_device_alloc("soc-audio", -1); |
| if (!smdk_snd_spdif_device) { |
| ret = -ENOMEM; |
| goto err2; |
| } |
| |
| platform_set_drvdata(smdk_snd_spdif_device, &smdk); |
| |
| ret = platform_device_add(smdk_snd_spdif_device); |
| if (ret) |
| goto err3; |
| |
| /* Set audio clock hierarchy manually */ |
| ret = set_audio_clock_heirachy(smdk_snd_spdif_device); |
| if (ret) |
| goto err4; |
| |
| return 0; |
| err4: |
| platform_device_del(smdk_snd_spdif_device); |
| err3: |
| platform_device_put(smdk_snd_spdif_device); |
| err2: |
| platform_device_del(smdk_snd_spdif_dit_device); |
| err1: |
| platform_device_put(smdk_snd_spdif_dit_device); |
| return ret; |
| } |
| |
| static void __exit smdk_exit(void) |
| { |
| platform_device_unregister(smdk_snd_spdif_device); |
| platform_device_unregister(smdk_snd_spdif_dit_device); |
| } |
| |
| module_init(smdk_init); |
| module_exit(smdk_exit); |
| |
| MODULE_AUTHOR("Seungwhan Youn, <sw.youn@samsung.com>"); |
| MODULE_DESCRIPTION("ALSA SoC SMDK+S/PDIF"); |
| MODULE_LICENSE("GPL"); |