| /* |
| * twl6030_pwm.c |
| * Driver for PHOENIX (TWL6030) Pulse Width Modulator |
| * |
| * Copyright (C) 2010 Texas Instruments |
| * Author: Hemanth V <hemanthv@ti.com> |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License version 2 as published by |
| * the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful, but WITHOUT |
| * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or |
| * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for |
| * more details. |
| * |
| * You should have received a copy of the GNU General Public License along with |
| * this program. If not, see <http://www.gnu.org/licenses/>. |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/platform_device.h> |
| #include <linux/pwm.h> |
| #include <linux/i2c/twl.h> |
| #include <linux/slab.h> |
| |
| #define LED_PWM_CTRL1 0xF4 |
| #define LED_PWM_CTRL2 0xF5 |
| |
| /* Max value for CTRL1 register */ |
| #define PWM_CTRL1_MAX 255 |
| |
| /* Pull down disable */ |
| #define PWM_CTRL2_DIS_PD (1 << 6) |
| |
| /* Current control 2.5 milli Amps */ |
| #define PWM_CTRL2_CURR_02 (2 << 4) |
| |
| /* LED supply source */ |
| #define PWM_CTRL2_SRC_VAC (1 << 2) |
| |
| /* LED modes */ |
| #define PWM_CTRL2_MODE_HW (0 << 0) |
| #define PWM_CTRL2_MODE_SW (1 << 0) |
| #define PWM_CTRL2_MODE_DIS (2 << 0) |
| |
| #define PWM_CTRL2_MODE_MASK 0x3 |
| |
| struct twl6030_pwm_chip { |
| struct pwm_chip chip; |
| }; |
| |
| static int twl6030_pwm_request(struct pwm_chip *chip, struct pwm_device *pwm) |
| { |
| int ret; |
| u8 val; |
| |
| /* Configure PWM */ |
| val = PWM_CTRL2_DIS_PD | PWM_CTRL2_CURR_02 | PWM_CTRL2_SRC_VAC | |
| PWM_CTRL2_MODE_HW; |
| |
| ret = twl_i2c_write_u8(TWL6030_MODULE_ID1, val, LED_PWM_CTRL2); |
| if (ret < 0) { |
| dev_err(chip->dev, "%s: Failed to configure PWM, Error %d\n", |
| pwm->label, ret); |
| return ret; |
| } |
| |
| return 0; |
| } |
| |
| static int twl6030_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm, |
| int duty_ns, int period_ns) |
| { |
| u8 duty_cycle = (duty_ns * PWM_CTRL1_MAX) / period_ns; |
| int ret; |
| |
| ret = twl_i2c_write_u8(TWL6030_MODULE_ID1, duty_cycle, LED_PWM_CTRL1); |
| if (ret < 0) { |
| pr_err("%s: Failed to configure PWM, Error %d\n", |
| pwm->label, ret); |
| return ret; |
| } |
| |
| return 0; |
| } |
| |
| static int twl6030_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm) |
| { |
| int ret; |
| u8 val; |
| |
| ret = twl_i2c_read_u8(TWL6030_MODULE_ID1, &val, LED_PWM_CTRL2); |
| if (ret < 0) { |
| dev_err(chip->dev, "%s: Failed to enable PWM, Error %d\n", |
| pwm->label, ret); |
| return ret; |
| } |
| |
| /* Change mode to software control */ |
| val &= ~PWM_CTRL2_MODE_MASK; |
| val |= PWM_CTRL2_MODE_SW; |
| |
| ret = twl_i2c_write_u8(TWL6030_MODULE_ID1, val, LED_PWM_CTRL2); |
| if (ret < 0) { |
| dev_err(chip->dev, "%s: Failed to enable PWM, Error %d\n", |
| pwm->label, ret); |
| return ret; |
| } |
| |
| twl_i2c_read_u8(TWL6030_MODULE_ID1, &val, LED_PWM_CTRL2); |
| return 0; |
| } |
| |
| static void twl6030_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm) |
| { |
| int ret; |
| u8 val; |
| |
| ret = twl_i2c_read_u8(TWL6030_MODULE_ID1, &val, LED_PWM_CTRL2); |
| if (ret < 0) { |
| dev_err(chip->dev, "%s: Failed to disable PWM, Error %d\n", |
| pwm->label, ret); |
| return; |
| } |
| |
| val &= ~PWM_CTRL2_MODE_MASK; |
| val |= PWM_CTRL2_MODE_HW; |
| |
| ret = twl_i2c_write_u8(TWL6030_MODULE_ID1, val, LED_PWM_CTRL2); |
| if (ret < 0) { |
| dev_err(chip->dev, "%s: Failed to disable PWM, Error %d\n", |
| pwm->label, ret); |
| } |
| } |
| |
| static const struct pwm_ops twl6030_pwm_ops = { |
| .request = twl6030_pwm_request, |
| .config = twl6030_pwm_config, |
| .enable = twl6030_pwm_enable, |
| .disable = twl6030_pwm_disable, |
| }; |
| |
| static int twl6030_pwm_probe(struct platform_device *pdev) |
| { |
| struct twl6030_pwm_chip *twl6030; |
| int ret; |
| |
| twl6030 = devm_kzalloc(&pdev->dev, sizeof(*twl6030), GFP_KERNEL); |
| if (!twl6030) |
| return -ENOMEM; |
| |
| twl6030->chip.dev = &pdev->dev; |
| twl6030->chip.ops = &twl6030_pwm_ops; |
| twl6030->chip.base = -1; |
| twl6030->chip.npwm = 1; |
| |
| ret = pwmchip_add(&twl6030->chip); |
| if (ret < 0) |
| return ret; |
| |
| platform_set_drvdata(pdev, twl6030); |
| |
| return 0; |
| } |
| |
| static int twl6030_pwm_remove(struct platform_device *pdev) |
| { |
| struct twl6030_pwm_chip *twl6030 = platform_get_drvdata(pdev); |
| |
| return pwmchip_remove(&twl6030->chip); |
| } |
| |
| static struct platform_driver twl6030_pwm_driver = { |
| .driver = { |
| .name = "twl6030-pwm", |
| }, |
| .probe = twl6030_pwm_probe, |
| .remove = __devexit_p(twl6030_pwm_remove), |
| }; |
| module_platform_driver(twl6030_pwm_driver); |
| |
| MODULE_ALIAS("platform:twl6030-pwm"); |
| MODULE_LICENSE("GPL"); |