| /* |
| * QLogic Fibre Channel HBA Driver |
| * Copyright (c) 2003-2008 QLogic Corporation |
| * |
| * See LICENSE.qla2xxx for copyright and licensing details. |
| */ |
| #include "qla_def.h" |
| #include "qla_gbl.h" |
| |
| #include <linux/moduleparam.h> |
| #include <linux/vmalloc.h> |
| #include <linux/smp_lock.h> |
| #include <linux/list.h> |
| |
| #include <scsi/scsi_tcq.h> |
| #include <scsi/scsicam.h> |
| #include <linux/delay.h> |
| |
| void |
| qla2x00_vp_stop_timer(scsi_qla_host_t *vha) |
| { |
| if (vha->vp_idx && vha->timer_active) { |
| del_timer_sync(&vha->timer); |
| vha->timer_active = 0; |
| } |
| } |
| |
| static uint32_t |
| qla24xx_allocate_vp_id(scsi_qla_host_t *vha) |
| { |
| uint32_t vp_id; |
| struct qla_hw_data *ha = vha->hw; |
| |
| /* Find an empty slot and assign an vp_id */ |
| mutex_lock(&ha->vport_lock); |
| vp_id = find_first_zero_bit(ha->vp_idx_map, ha->max_npiv_vports + 1); |
| if (vp_id > ha->max_npiv_vports) { |
| DEBUG15(printk ("vp_id %d is bigger than max-supported %d.\n", |
| vp_id, ha->max_npiv_vports)); |
| mutex_unlock(&ha->vport_lock); |
| return vp_id; |
| } |
| |
| set_bit(vp_id, ha->vp_idx_map); |
| ha->num_vhosts++; |
| ha->cur_vport_count++; |
| vha->vp_idx = vp_id; |
| list_add_tail(&vha->list, &ha->vp_list); |
| mutex_unlock(&ha->vport_lock); |
| return vp_id; |
| } |
| |
| void |
| qla24xx_deallocate_vp_id(scsi_qla_host_t *vha) |
| { |
| uint16_t vp_id; |
| struct qla_hw_data *ha = vha->hw; |
| |
| mutex_lock(&ha->vport_lock); |
| vp_id = vha->vp_idx; |
| ha->num_vhosts--; |
| ha->cur_vport_count--; |
| clear_bit(vp_id, ha->vp_idx_map); |
| list_del(&vha->list); |
| mutex_unlock(&ha->vport_lock); |
| } |
| |
| static scsi_qla_host_t * |
| qla24xx_find_vhost_by_name(struct qla_hw_data *ha, uint8_t *port_name) |
| { |
| scsi_qla_host_t *vha; |
| |
| /* Locate matching device in database. */ |
| list_for_each_entry(vha, &ha->vp_list, list) { |
| if (!memcmp(port_name, vha->port_name, WWN_SIZE)) |
| return vha; |
| } |
| return NULL; |
| } |
| |
| /* |
| * qla2x00_mark_vp_devices_dead |
| * Updates fcport state when device goes offline. |
| * |
| * Input: |
| * ha = adapter block pointer. |
| * fcport = port structure pointer. |
| * |
| * Return: |
| * None. |
| * |
| * Context: |
| */ |
| static void |
| qla2x00_mark_vp_devices_dead(scsi_qla_host_t *vha) |
| { |
| fc_port_t *fcport; |
| |
| list_for_each_entry(fcport, &vha->vp_fcports, list) { |
| DEBUG15(printk("scsi(%ld): Marking port dead, " |
| "loop_id=0x%04x :%x\n", |
| vha->host_no, fcport->loop_id, fcport->vp_idx)); |
| |
| atomic_set(&fcport->state, FCS_DEVICE_DEAD); |
| qla2x00_mark_device_lost(vha, fcport, 0, 0); |
| atomic_set(&fcport->state, FCS_UNCONFIGURED); |
| } |
| } |
| |
| int |
| qla24xx_disable_vp(scsi_qla_host_t *vha) |
| { |
| int ret; |
| |
| ret = qla24xx_control_vp(vha, VCE_COMMAND_DISABLE_VPS_LOGO_ALL); |
| atomic_set(&vha->loop_state, LOOP_DOWN); |
| atomic_set(&vha->loop_down_timer, LOOP_DOWN_TIME); |
| |
| qla2x00_mark_vp_devices_dead(vha); |
| atomic_set(&vha->vp_state, VP_FAILED); |
| vha->flags.management_server_logged_in = 0; |
| if (ret == QLA_SUCCESS) { |
| fc_vport_set_state(vha->fc_vport, FC_VPORT_DISABLED); |
| } else { |
| fc_vport_set_state(vha->fc_vport, FC_VPORT_FAILED); |
| return -1; |
| } |
| return 0; |
| } |
| |
| int |
| qla24xx_enable_vp(scsi_qla_host_t *vha) |
| { |
| int ret; |
| struct qla_hw_data *ha = vha->hw; |
| scsi_qla_host_t *base_vha = pci_get_drvdata(ha->pdev); |
| |
| /* Check if physical ha port is Up */ |
| if (atomic_read(&base_vha->loop_state) == LOOP_DOWN || |
| atomic_read(&base_vha->loop_state) == LOOP_DEAD) { |
| vha->vp_err_state = VP_ERR_PORTDWN; |
| fc_vport_set_state(vha->fc_vport, FC_VPORT_LINKDOWN); |
| goto enable_failed; |
| } |
| |
| /* Initialize the new vport unless it is a persistent port */ |
| mutex_lock(&ha->vport_lock); |
| ret = qla24xx_modify_vp_config(vha); |
| mutex_unlock(&ha->vport_lock); |
| |
| if (ret != QLA_SUCCESS) { |
| fc_vport_set_state(vha->fc_vport, FC_VPORT_FAILED); |
| goto enable_failed; |
| } |
| |
| DEBUG15(qla_printk(KERN_INFO, ha, |
| "Virtual port with id: %d - Enabled\n", vha->vp_idx)); |
| return 0; |
| |
| enable_failed: |
| DEBUG15(qla_printk(KERN_INFO, ha, |
| "Virtual port with id: %d - Disabled\n", vha->vp_idx)); |
| return 1; |
| } |
| |
| static void |
| qla24xx_configure_vp(scsi_qla_host_t *vha) |
| { |
| struct fc_vport *fc_vport; |
| int ret; |
| |
| fc_vport = vha->fc_vport; |
| |
| DEBUG15(printk("scsi(%ld): %s: change request #3 for this host.\n", |
| vha->host_no, __func__)); |
| ret = qla2x00_send_change_request(vha, 0x3, vha->vp_idx); |
| if (ret != QLA_SUCCESS) { |
| DEBUG15(qla_printk(KERN_ERR, vha->hw, "Failed to enable " |
| "receiving of RSCN requests: 0x%x\n", ret)); |
| return; |
| } else { |
| /* Corresponds to SCR enabled */ |
| clear_bit(VP_SCR_NEEDED, &vha->vp_flags); |
| } |
| |
| vha->flags.online = 1; |
| if (qla24xx_configure_vhba(vha)) |
| return; |
| |
| atomic_set(&vha->vp_state, VP_ACTIVE); |
| fc_vport_set_state(fc_vport, FC_VPORT_ACTIVE); |
| } |
| |
| void |
| qla2x00_alert_all_vps(struct rsp_que *rsp, uint16_t *mb) |
| { |
| scsi_qla_host_t *vha; |
| struct qla_hw_data *ha = rsp->hw; |
| int i = 0; |
| |
| list_for_each_entry(vha, &ha->vp_list, list) { |
| if (vha->vp_idx) { |
| switch (mb[0]) { |
| case MBA_LIP_OCCURRED: |
| case MBA_LOOP_UP: |
| case MBA_LOOP_DOWN: |
| case MBA_LIP_RESET: |
| case MBA_POINT_TO_POINT: |
| case MBA_CHG_IN_CONNECTION: |
| case MBA_PORT_UPDATE: |
| case MBA_RSCN_UPDATE: |
| DEBUG15(printk("scsi(%ld)%s: Async_event for" |
| " VP[%d], mb = 0x%x, vha=%p\n", |
| vha->host_no, __func__, i, *mb, vha)); |
| qla2x00_async_event(vha, rsp, mb); |
| break; |
| } |
| } |
| i++; |
| } |
| } |
| |
| int |
| qla2x00_vp_abort_isp(scsi_qla_host_t *vha) |
| { |
| /* |
| * Physical port will do most of the abort and recovery work. We can |
| * just treat it as a loop down |
| */ |
| if (atomic_read(&vha->loop_state) != LOOP_DOWN) { |
| atomic_set(&vha->loop_state, LOOP_DOWN); |
| qla2x00_mark_all_devices_lost(vha, 0); |
| } else { |
| if (!atomic_read(&vha->loop_down_timer)) |
| atomic_set(&vha->loop_down_timer, LOOP_DOWN_TIME); |
| } |
| |
| /* To exclusively reset vport, we need to log it out first.*/ |
| if (!test_bit(ABORT_ISP_ACTIVE, &vha->dpc_flags)) |
| qla24xx_control_vp(vha, VCE_COMMAND_DISABLE_VPS_LOGO_ALL); |
| |
| DEBUG15(printk("scsi(%ld): Scheduling enable of Vport %d...\n", |
| vha->host_no, vha->vp_idx)); |
| return qla24xx_enable_vp(vha); |
| } |
| |
| static int |
| qla2x00_do_dpc_vp(scsi_qla_host_t *vha) |
| { |
| struct qla_hw_data *ha = vha->hw; |
| scsi_qla_host_t *base_vha = pci_get_drvdata(ha->pdev); |
| |
| if (test_and_clear_bit(VP_IDX_ACQUIRED, &vha->vp_flags)) { |
| /* VP acquired. complete port configuration */ |
| if (atomic_read(&base_vha->loop_state) == LOOP_READY) { |
| qla24xx_configure_vp(vha); |
| } else { |
| set_bit(VP_IDX_ACQUIRED, &vha->vp_flags); |
| set_bit(VP_DPC_NEEDED, &base_vha->dpc_flags); |
| } |
| |
| return 0; |
| } |
| |
| if (test_bit(FCPORT_UPDATE_NEEDED, &vha->dpc_flags)) { |
| qla2x00_update_fcports(vha); |
| clear_bit(FCPORT_UPDATE_NEEDED, &vha->dpc_flags); |
| } |
| |
| if ((test_and_clear_bit(RELOGIN_NEEDED, &vha->dpc_flags)) && |
| !test_bit(LOOP_RESYNC_NEEDED, &vha->dpc_flags) && |
| atomic_read(&vha->loop_state) != LOOP_DOWN) { |
| |
| DEBUG(printk("scsi(%ld): qla2x00_port_login()\n", |
| vha->host_no)); |
| qla2x00_relogin(vha); |
| |
| DEBUG(printk("scsi(%ld): qla2x00_port_login - end\n", |
| vha->host_no)); |
| } |
| |
| if (test_and_clear_bit(RESET_MARKER_NEEDED, &vha->dpc_flags) && |
| (!(test_and_set_bit(RESET_ACTIVE, &vha->dpc_flags)))) { |
| clear_bit(RESET_ACTIVE, &vha->dpc_flags); |
| } |
| |
| if (test_and_clear_bit(LOOP_RESYNC_NEEDED, &vha->dpc_flags)) { |
| if (!(test_and_set_bit(LOOP_RESYNC_ACTIVE, &vha->dpc_flags))) { |
| qla2x00_loop_resync(vha); |
| clear_bit(LOOP_RESYNC_ACTIVE, &vha->dpc_flags); |
| } |
| } |
| |
| return 0; |
| } |
| |
| void |
| qla2x00_do_dpc_all_vps(scsi_qla_host_t *vha) |
| { |
| int ret; |
| struct qla_hw_data *ha = vha->hw; |
| scsi_qla_host_t *vp; |
| |
| if (vha->vp_idx) |
| return; |
| if (list_empty(&ha->vp_list)) |
| return; |
| |
| clear_bit(VP_DPC_NEEDED, &vha->dpc_flags); |
| |
| list_for_each_entry(vp, &ha->vp_list, list) { |
| if (vp->vp_idx) |
| ret = qla2x00_do_dpc_vp(vp); |
| } |
| } |
| |
| int |
| qla24xx_vport_create_req_sanity_check(struct fc_vport *fc_vport) |
| { |
| scsi_qla_host_t *base_vha = shost_priv(fc_vport->shost); |
| struct qla_hw_data *ha = base_vha->hw; |
| scsi_qla_host_t *vha; |
| uint8_t port_name[WWN_SIZE]; |
| |
| if (fc_vport->roles != FC_PORT_ROLE_FCP_INITIATOR) |
| return VPCERR_UNSUPPORTED; |
| |
| /* Check up the F/W and H/W support NPIV */ |
| if (!ha->flags.npiv_supported) |
| return VPCERR_UNSUPPORTED; |
| |
| /* Check up whether npiv supported switch presented */ |
| if (!(ha->switch_cap & FLOGI_MID_SUPPORT)) |
| return VPCERR_NO_FABRIC_SUPP; |
| |
| /* Check up unique WWPN */ |
| u64_to_wwn(fc_vport->port_name, port_name); |
| if (!memcmp(port_name, base_vha->port_name, WWN_SIZE)) |
| return VPCERR_BAD_WWN; |
| vha = qla24xx_find_vhost_by_name(ha, port_name); |
| if (vha) |
| return VPCERR_BAD_WWN; |
| |
| /* Check up max-npiv-supports */ |
| if (ha->num_vhosts > ha->max_npiv_vports) { |
| DEBUG15(printk("scsi(%ld): num_vhosts %ud is bigger than " |
| "max_npv_vports %ud.\n", base_vha->host_no, |
| ha->num_vhosts, ha->max_npiv_vports)); |
| return VPCERR_UNSUPPORTED; |
| } |
| return 0; |
| } |
| |
| scsi_qla_host_t * |
| qla24xx_create_vhost(struct fc_vport *fc_vport) |
| { |
| scsi_qla_host_t *base_vha = shost_priv(fc_vport->shost); |
| struct qla_hw_data *ha = base_vha->hw; |
| scsi_qla_host_t *vha; |
| struct scsi_host_template *sht = &qla24xx_driver_template; |
| struct Scsi_Host *host; |
| |
| vha = qla2x00_create_host(sht, ha); |
| if (!vha) { |
| DEBUG(printk("qla2xxx: scsi_host_alloc() failed for vport\n")); |
| return(NULL); |
| } |
| |
| host = vha->host; |
| fc_vport->dd_data = vha; |
| /* New host info */ |
| u64_to_wwn(fc_vport->node_name, vha->node_name); |
| u64_to_wwn(fc_vport->port_name, vha->port_name); |
| |
| vha->fc_vport = fc_vport; |
| vha->device_flags = 0; |
| vha->vp_idx = qla24xx_allocate_vp_id(vha); |
| if (vha->vp_idx > ha->max_npiv_vports) { |
| DEBUG15(printk("scsi(%ld): Couldn't allocate vp_id.\n", |
| vha->host_no)); |
| goto create_vhost_failed; |
| } |
| vha->mgmt_svr_loop_id = 10 + vha->vp_idx; |
| |
| vha->dpc_flags = 0L; |
| set_bit(REGISTER_FDMI_NEEDED, &vha->dpc_flags); |
| set_bit(REGISTER_FC4_NEEDED, &vha->dpc_flags); |
| |
| /* |
| * To fix the issue of processing a parent's RSCN for the vport before |
| * its SCR is complete. |
| */ |
| set_bit(VP_SCR_NEEDED, &vha->vp_flags); |
| atomic_set(&vha->loop_state, LOOP_DOWN); |
| atomic_set(&vha->loop_down_timer, LOOP_DOWN_TIME); |
| |
| qla2x00_start_timer(vha, qla2x00_timer, WATCH_INTERVAL); |
| |
| memset(vha->req_ques, 0, sizeof(vha->req_ques)); |
| vha->req_ques[0] = ha->req_q_map[0]->id; |
| host->can_queue = ha->req_q_map[0]->length + 128; |
| host->this_id = 255; |
| host->cmd_per_lun = 3; |
| host->max_cmd_len = MAX_CMDSZ; |
| host->max_channel = MAX_BUSES - 1; |
| host->max_lun = MAX_LUNS; |
| host->unique_id = host->host_no; |
| host->max_id = MAX_TARGETS_2200; |
| host->transportt = qla2xxx_transport_vport_template; |
| |
| DEBUG15(printk("DEBUG: detect vport hba %ld at address = %p\n", |
| vha->host_no, vha)); |
| |
| vha->flags.init_done = 1; |
| |
| return vha; |
| |
| create_vhost_failed: |
| return NULL; |
| } |
| |
| static void |
| qla25xx_free_req_que(struct scsi_qla_host *vha, struct req_que *req) |
| { |
| struct qla_hw_data *ha = vha->hw; |
| uint16_t que_id = req->id; |
| |
| dma_free_coherent(&ha->pdev->dev, (req->length + 1) * |
| sizeof(request_t), req->ring, req->dma); |
| req->ring = NULL; |
| req->dma = 0; |
| if (que_id) { |
| ha->req_q_map[que_id] = NULL; |
| mutex_lock(&ha->vport_lock); |
| clear_bit(que_id, ha->req_qid_map); |
| mutex_unlock(&ha->vport_lock); |
| } |
| kfree(req); |
| req = NULL; |
| } |
| |
| static void |
| qla25xx_free_rsp_que(struct scsi_qla_host *vha, struct rsp_que *rsp) |
| { |
| struct qla_hw_data *ha = vha->hw; |
| uint16_t que_id = rsp->id; |
| |
| if (rsp->msix && rsp->msix->have_irq) { |
| free_irq(rsp->msix->vector, rsp); |
| rsp->msix->have_irq = 0; |
| rsp->msix->rsp = NULL; |
| } |
| dma_free_coherent(&ha->pdev->dev, (rsp->length + 1) * |
| sizeof(response_t), rsp->ring, rsp->dma); |
| rsp->ring = NULL; |
| rsp->dma = 0; |
| if (que_id) { |
| ha->rsp_q_map[que_id] = NULL; |
| mutex_lock(&ha->vport_lock); |
| clear_bit(que_id, ha->rsp_qid_map); |
| mutex_unlock(&ha->vport_lock); |
| } |
| kfree(rsp); |
| rsp = NULL; |
| } |
| |
| int |
| qla25xx_delete_req_que(struct scsi_qla_host *vha, struct req_que *req) |
| { |
| int ret = -1; |
| |
| if (req) { |
| req->options |= BIT_0; |
| ret = qla25xx_init_req_que(vha, req); |
| } |
| if (ret == QLA_SUCCESS) |
| qla25xx_free_req_que(vha, req); |
| |
| return ret; |
| } |
| |
| int |
| qla25xx_delete_rsp_que(struct scsi_qla_host *vha, struct rsp_que *rsp) |
| { |
| int ret = -1; |
| |
| if (rsp) { |
| rsp->options |= BIT_0; |
| ret = qla25xx_init_rsp_que(vha, rsp); |
| } |
| if (ret == QLA_SUCCESS) |
| qla25xx_free_rsp_que(vha, rsp); |
| |
| return ret; |
| } |
| |
| int qla25xx_update_req_que(struct scsi_qla_host *vha, uint8_t que, uint8_t qos) |
| { |
| int ret = 0; |
| struct qla_hw_data *ha = vha->hw; |
| struct req_que *req = ha->req_q_map[que]; |
| |
| req->options |= BIT_3; |
| req->qos = qos; |
| ret = qla25xx_init_req_que(vha, req); |
| if (ret != QLA_SUCCESS) |
| DEBUG2_17(printk(KERN_WARNING "%s failed\n", __func__)); |
| /* restore options bit */ |
| req->options &= ~BIT_3; |
| return ret; |
| } |
| |
| |
| /* Delete all queues for a given vhost */ |
| int |
| qla25xx_delete_queues(struct scsi_qla_host *vha, uint8_t que_no) |
| { |
| int cnt, ret = 0; |
| struct req_que *req = NULL; |
| struct rsp_que *rsp = NULL; |
| struct qla_hw_data *ha = vha->hw; |
| |
| if (que_no) { |
| /* Delete request queue */ |
| req = ha->req_q_map[que_no]; |
| if (req) { |
| rsp = req->rsp; |
| ret = qla25xx_delete_req_que(vha, req); |
| if (ret != QLA_SUCCESS) { |
| qla_printk(KERN_WARNING, ha, |
| "Couldn't delete req que %d\n", req->id); |
| return ret; |
| } |
| /* Delete associated response queue */ |
| if (rsp) { |
| ret = qla25xx_delete_rsp_que(vha, rsp); |
| if (ret != QLA_SUCCESS) { |
| qla_printk(KERN_WARNING, ha, |
| "Couldn't delete rsp que %d\n", |
| rsp->id); |
| return ret; |
| } |
| } |
| } |
| } else { /* delete all queues of this host */ |
| for (cnt = 0; cnt < QLA_MAX_HOST_QUES; cnt++) { |
| /* Delete request queues */ |
| req = ha->req_q_map[vha->req_ques[cnt]]; |
| if (req && req->id) { |
| rsp = req->rsp; |
| ret = qla25xx_delete_req_que(vha, req); |
| if (ret != QLA_SUCCESS) { |
| qla_printk(KERN_WARNING, ha, |
| "Couldn't delete req que %d\n", |
| vha->req_ques[cnt]); |
| return ret; |
| } |
| vha->req_ques[cnt] = ha->req_q_map[0]->id; |
| /* Delete associated response queue */ |
| if (rsp && rsp->id) { |
| ret = qla25xx_delete_rsp_que(vha, rsp); |
| if (ret != QLA_SUCCESS) { |
| qla_printk(KERN_WARNING, ha, |
| "Couldn't delete rsp que %d\n", |
| rsp->id); |
| return ret; |
| } |
| } |
| } |
| } |
| } |
| qla_printk(KERN_INFO, ha, "Queues deleted for vport:%d\n", |
| vha->vp_idx); |
| return ret; |
| } |
| |
| int |
| qla25xx_create_req_que(struct qla_hw_data *ha, uint16_t options, |
| uint8_t vp_idx, uint16_t rid, uint8_t rsp_que, uint8_t qos) |
| { |
| int ret = 0; |
| struct req_que *req = NULL; |
| struct scsi_qla_host *base_vha = pci_get_drvdata(ha->pdev); |
| uint16_t que_id = 0; |
| |
| req = kzalloc(sizeof(struct req_que), GFP_KERNEL); |
| if (req == NULL) { |
| qla_printk(KERN_WARNING, ha, "could not allocate memory" |
| "for request que\n"); |
| goto que_failed; |
| } |
| |
| req->length = REQUEST_ENTRY_CNT_24XX; |
| req->ring = dma_alloc_coherent(&ha->pdev->dev, |
| (req->length + 1) * sizeof(request_t), |
| &req->dma, GFP_KERNEL); |
| if (req->ring == NULL) { |
| qla_printk(KERN_WARNING, ha, |
| "Memory Allocation failed - request_ring\n"); |
| goto que_failed; |
| } |
| |
| mutex_lock(&ha->vport_lock); |
| que_id = find_first_zero_bit(ha->req_qid_map, ha->max_queues); |
| if (que_id >= ha->max_queues) { |
| mutex_unlock(&ha->vport_lock); |
| qla_printk(KERN_INFO, ha, "No resources to create " |
| "additional request queue\n"); |
| goto que_failed; |
| } |
| set_bit(que_id, ha->req_qid_map); |
| ha->req_q_map[que_id] = req; |
| req->rid = rid; |
| req->vp_idx = vp_idx; |
| req->qos = qos; |
| |
| if (ha->rsp_q_map[rsp_que]) { |
| req->rsp = ha->rsp_q_map[rsp_que]; |
| req->rsp->req = req; |
| } |
| /* Use alternate PCI bus number */ |
| if (MSB(req->rid)) |
| options |= BIT_4; |
| /* Use alternate PCI devfn */ |
| if (LSB(req->rid)) |
| options |= BIT_5; |
| req->options = options; |
| req->ring_ptr = req->ring; |
| req->ring_index = 0; |
| req->cnt = req->length; |
| req->id = que_id; |
| req->max_q_depth = ha->req_q_map[0]->max_q_depth; |
| mutex_unlock(&ha->vport_lock); |
| |
| ret = qla25xx_init_req_que(base_vha, req); |
| if (ret != QLA_SUCCESS) { |
| qla_printk(KERN_WARNING, ha, "%s failed\n", __func__); |
| mutex_lock(&ha->vport_lock); |
| clear_bit(que_id, ha->req_qid_map); |
| mutex_unlock(&ha->vport_lock); |
| goto que_failed; |
| } |
| |
| return req->id; |
| |
| que_failed: |
| qla25xx_free_req_que(base_vha, req); |
| return 0; |
| } |
| |
| /* create response queue */ |
| int |
| qla25xx_create_rsp_que(struct qla_hw_data *ha, uint16_t options, |
| uint8_t vp_idx, uint16_t rid) |
| { |
| int ret = 0; |
| struct rsp_que *rsp = NULL; |
| struct scsi_qla_host *base_vha = pci_get_drvdata(ha->pdev); |
| uint16_t que_id = 0;; |
| |
| rsp = kzalloc(sizeof(struct rsp_que), GFP_KERNEL); |
| if (rsp == NULL) { |
| qla_printk(KERN_WARNING, ha, "could not allocate memory for" |
| " response que\n"); |
| goto que_failed; |
| } |
| |
| rsp->length = RESPONSE_ENTRY_CNT_2300; |
| rsp->ring = dma_alloc_coherent(&ha->pdev->dev, |
| (rsp->length + 1) * sizeof(response_t), |
| &rsp->dma, GFP_KERNEL); |
| if (rsp->ring == NULL) { |
| qla_printk(KERN_WARNING, ha, |
| "Memory Allocation failed - response_ring\n"); |
| goto que_failed; |
| } |
| |
| mutex_lock(&ha->vport_lock); |
| que_id = find_first_zero_bit(ha->rsp_qid_map, ha->max_queues); |
| if (que_id >= ha->max_queues) { |
| mutex_unlock(&ha->vport_lock); |
| qla_printk(KERN_INFO, ha, "No resources to create " |
| "additional response queue\n"); |
| goto que_failed; |
| } |
| set_bit(que_id, ha->rsp_qid_map); |
| |
| if (ha->flags.msix_enabled) |
| rsp->msix = &ha->msix_entries[que_id + 1]; |
| else |
| qla_printk(KERN_WARNING, ha, "msix not enabled\n"); |
| |
| ha->rsp_q_map[que_id] = rsp; |
| rsp->rid = rid; |
| rsp->vp_idx = vp_idx; |
| rsp->hw = ha; |
| /* Use alternate PCI bus number */ |
| if (MSB(rsp->rid)) |
| options |= BIT_4; |
| /* Use alternate PCI devfn */ |
| if (LSB(rsp->rid)) |
| options |= BIT_5; |
| rsp->options = options; |
| rsp->ring_ptr = rsp->ring; |
| rsp->ring_index = 0; |
| rsp->id = que_id; |
| mutex_unlock(&ha->vport_lock); |
| |
| ret = qla25xx_request_irq(rsp); |
| if (ret) |
| goto que_failed; |
| |
| ret = qla25xx_init_rsp_que(base_vha, rsp); |
| if (ret != QLA_SUCCESS) { |
| qla_printk(KERN_WARNING, ha, "%s failed\n", __func__); |
| mutex_lock(&ha->vport_lock); |
| clear_bit(que_id, ha->rsp_qid_map); |
| mutex_unlock(&ha->vport_lock); |
| goto que_failed; |
| } |
| |
| qla2x00_init_response_q_entries(rsp); |
| |
| return rsp->id; |
| |
| que_failed: |
| qla25xx_free_rsp_que(base_vha, rsp); |
| return 0; |
| } |
| |
| int |
| qla25xx_create_queues(struct scsi_qla_host *vha, uint8_t qos) |
| { |
| uint16_t options = 0; |
| uint8_t ret = 0; |
| struct qla_hw_data *ha = vha->hw; |
| |
| options |= BIT_1; |
| ret = qla25xx_create_rsp_que(ha, options, vha->vp_idx, 0); |
| if (!ret) { |
| qla_printk(KERN_WARNING, ha, "Response Que create failed\n"); |
| return ret; |
| } else |
| qla_printk(KERN_INFO, ha, "Response Que:%d created.\n", ret); |
| |
| options = 0; |
| if (qos & BIT_7) |
| options |= BIT_8; |
| ret = qla25xx_create_req_que(ha, options, vha->vp_idx, 0, ret, |
| qos & ~BIT_7); |
| if (ret) { |
| vha->req_ques[0] = ret; |
| qla_printk(KERN_INFO, ha, "Request Que:%d created.\n", ret); |
| } else |
| qla_printk(KERN_WARNING, ha, "Request Que create failed\n"); |
| |
| return ret; |
| } |