blob: df8e0ff0c5d50dc93c8bd68c4ffce5910e809f3a [file] [log] [blame]
#ifndef PINCTRL_PINCTRL_ABx5O0_H
#define PINCTRL_PINCTRL_ABx500_H
/* Package definitions */
#define PINCTRL_AB8500 0
#define PINCTRL_AB8540 1
#define PINCTRL_AB9540 2
#define PINCTRL_AB8505 3
/* pins alternate function */
enum abx500_pin_func {
ABX500_DEFAULT,
ABX500_ALT_A,
ABX500_ALT_B,
ABX500_ALT_C,
};
/**
* struct abx500_function - ABx500 pinctrl mux function
* @name: The name of the function, exported to pinctrl core.
* @groups: An array of pin groups that may select this function.
* @ngroups: The number of entries in @groups.
*/
struct abx500_function {
const char *name;
const char * const *groups;
unsigned ngroups;
};
/**
* struct abx500_pingroup - describes a ABx500 pin group
* @name: the name of this specific pin group
* @pins: an array of discrete physical pins used in this group, taken
* from the driver-local pin enumeration space
* @num_pins: the number of pins in this group array, i.e. the number of
* elements in .pins so we can iterate over that array
* @altsetting: the altsetting to apply to all pins in this group to
* configure them to be used by a function
*/
struct abx500_pingroup {
const char *name;
const unsigned int *pins;
const unsigned npins;
int altsetting;
};
#define ALTERNATE_FUNCTIONS(pin, sel_bit, alt1, alt2, alta, altb, altc) \
{ \
.pin_number = pin, \
.gpiosel_bit = sel_bit, \
.alt_bit1 = alt1, \
.alt_bit2 = alt2, \
.alta_val = alta, \
.altb_val = altb, \
.altc_val = altc, \
}
#define UNUSED -1
/**
* struct alternate_functions
* @pin_number: The pin number
* @gpiosel_bit: Control bit in GPIOSEL register,
* @alt_bit1: First AlternateFunction bit used to select the
* alternate function
* @alt_bit2: Second AlternateFunction bit used to select the
* alternate function
*
* these 3 following fields are necessary due to none
* coherency on how to select the altA, altB and altC
* function between the ABx500 SOC family when using
* alternatfunc register.
* @alta_val: value to write in alternatfunc to select altA function
* @altb_val: value to write in alternatfunc to select altB function
* @altc_val: value to write in alternatfunc to select altC function
*/
struct alternate_functions {
unsigned pin_number;
s8 gpiosel_bit;
s8 alt_bit1;
s8 alt_bit2;
u8 alta_val;
u8 altb_val;
u8 altc_val;
};
/**
* struct pullud - specific pull up/down feature
* @first_pin: The pin number of the first pins which support
* specific pull up/down
* @last_pin: The pin number of the last pins
*/
struct pullud {
unsigned first_pin;
unsigned last_pin;
};
#define GPIO_IRQ_CLUSTER(a, b, c) \
{ \
.start = a, \
.end = b, \
.offset = c, \
}
/**
* struct abx500_gpio_irq_cluster - indicates GPIOs which are interrupt
* capable
* @start: The pin number of the first pin interrupt capable
* @end: The pin number of the last pin interrupt capable
* @offset: offset used to compute specific setting strategy of
* the interrupt line
*/
struct abx500_gpio_irq_cluster {
int start;
int end;
int offset;
};
/**
* struct abx500_pinrange - map pin numbers to GPIO offsets
* @offset: offset into the GPIO local numberspace, incidentally
* identical to the offset into the local pin numberspace
* @npins: number of pins to map from both offsets
* @altfunc: altfunc setting to be used to enable GPIO on a pin in
* this range (may vary)
*/
struct abx500_pinrange {
unsigned int offset;
unsigned int npins;
int altfunc;
};
#define ABX500_PINRANGE(a, b, c) { .offset = a, .npins = b, .altfunc = c }
/**
* struct abx500_pinctrl_soc_data - ABx500 pin controller per-SoC configuration
* @gpio_ranges: An array of GPIO ranges for this SoC
* @gpio_num_ranges: The number of GPIO ranges for this SoC
* @pins: An array describing all pins the pin controller affects.
* All pins which are also GPIOs must be listed first within the
* array, and be numbered identically to the GPIO controller's
* numbering.
* @npins: The number of entries in @pins.
* @functions: The functions supported on this SoC.
* @nfunction: The number of entries in @functions.
* @groups: An array describing all pin groups the pin SoC supports.
* @ngroups: The number of entries in @groups.
* @alternate_functions: array describing pins which supports alternate and
* how to set it.
* @pullud: array describing pins which supports pull up/down
* specific registers.
* @gpio_irq_cluster: An array of GPIO interrupt capable for this SoC
* @ngpio_irq_cluster: The number of GPIO inetrrupt capable for this SoC
* @irq_gpio_rising_offset: Interrupt offset used as base to compute specific
* setting strategy of the rising interrupt line
* @irq_gpio_falling_offset: Interrupt offset used as base to compute specific
* setting strategy of the falling interrupt line
* @irq_gpio_factor: Factor used to compute specific setting strategy of
* the interrupt line
*/
struct abx500_pinctrl_soc_data {
const struct abx500_pinrange *gpio_ranges;
unsigned gpio_num_ranges;
const struct pinctrl_pin_desc *pins;
unsigned npins;
const struct abx500_function *functions;
unsigned nfunctions;
const struct abx500_pingroup *groups;
unsigned ngroups;
struct alternate_functions *alternate_functions;
struct pullud *pullud;
struct abx500_gpio_irq_cluster *gpio_irq_cluster;
unsigned ngpio_irq_cluster;
int irq_gpio_rising_offset;
int irq_gpio_falling_offset;
int irq_gpio_factor;
};
#ifdef CONFIG_PINCTRL_AB8500
void abx500_pinctrl_ab8500_init(struct abx500_pinctrl_soc_data **soc);
#else
static inline void
abx500_pinctrl_ab8500_init(struct abx500_pinctrl_soc_data **soc)
{
}
#endif
#ifdef CONFIG_PINCTRL_AB8540
void abx500_pinctrl_ab8540_init(struct abx500_pinctrl_soc_data **soc);
#else
static inline void
abx500_pinctrl_ab8540_init(struct abx500_pinctrl_soc_data **soc)
{
}
#endif
#ifdef CONFIG_PINCTRL_AB9540
void abx500_pinctrl_ab9540_init(struct abx500_pinctrl_soc_data **soc);
#else
static inline void
abx500_pinctrl_ab9540_init(struct abx500_pinctrl_soc_data **soc)
{
}
#endif
#ifdef CONFIG_PINCTRL_AB8505
void abx500_pinctrl_ab8505_init(struct abx500_pinctrl_soc_data **soc);
#else
static inline void
abx500_pinctrl_ab8505_init(struct abx500_pinctrl_soc_data **soc)
{
}
#endif
#endif /* PINCTRL_PINCTRL_ABx500_H */