| /* |
| * Linux ARCnet driver - device-independent routines |
| * |
| * Written 1997 by David Woodhouse. |
| * Written 1994-1999 by Avery Pennarun. |
| * Written 1999-2000 by Martin Mares <mj@ucw.cz>. |
| * Derived from skeleton.c by Donald Becker. |
| * |
| * Special thanks to Contemporary Controls, Inc. (www.ccontrols.com) |
| * for sponsoring the further development of this driver. |
| * |
| * ********************** |
| * |
| * The original copyright was as follows: |
| * |
| * skeleton.c Written 1993 by Donald Becker. |
| * Copyright 1993 United States Government as represented by the |
| * Director, National Security Agency. This software may only be used |
| * and distributed according to the terms of the GNU General Public License as |
| * modified by SRC, incorporated herein by reference. |
| * |
| * ********************** |
| * |
| * The change log is now in a file called ChangeLog in this directory. |
| * |
| * Sources: |
| * - Crynwr arcnet.com/arcether.com packet drivers. |
| * - arcnet.c v0.00 dated 1/1/94 and apparently by |
| * Donald Becker - it didn't work :) |
| * - skeleton.c v0.05 dated 11/16/93 by Donald Becker |
| * (from Linux Kernel 1.1.45) |
| * - RFC's 1201 and 1051 - re: TCP/IP over ARCnet |
| * - The official ARCnet COM9026 data sheets (!) thanks to |
| * Ken Cornetet <kcornete@nyx10.cs.du.edu> |
| * - The official ARCnet COM20020 data sheets. |
| * - Information on some more obscure ARCnet controller chips, thanks |
| * to the nice people at SMSC. |
| * - net/inet/eth.c (from kernel 1.1.50) for header-building info. |
| * - Alternate Linux ARCnet source by V.Shergin <vsher@sao.stavropol.su> |
| * - Textual information and more alternate source from Joachim Koenig |
| * <jojo@repas.de> |
| */ |
| |
| #define VERSION "arcnet: v3.94 BETA 2007/02/08 - by Avery Pennarun et al.\n" |
| |
| #include <linux/module.h> |
| #include <linux/types.h> |
| #include <linux/delay.h> |
| #include <linux/netdevice.h> |
| #include <linux/if_arp.h> |
| #include <net/arp.h> |
| #include <linux/init.h> |
| #include <linux/arcdevice.h> |
| #include <linux/jiffies.h> |
| |
| /* "do nothing" functions for protocol drivers */ |
| static void null_rx(struct net_device *dev, int bufnum, |
| struct archdr *pkthdr, int length); |
| static int null_build_header(struct sk_buff *skb, struct net_device *dev, |
| unsigned short type, uint8_t daddr); |
| static int null_prepare_tx(struct net_device *dev, struct archdr *pkt, |
| int length, int bufnum); |
| |
| static void arcnet_rx(struct net_device *dev, int bufnum); |
| |
| /* |
| * one ArcProto per possible proto ID. None of the elements of |
| * arc_proto_map are allowed to be NULL; they will get set to |
| * arc_proto_default instead. It also must not be NULL; if you would like |
| * to set it to NULL, set it to &arc_proto_null instead. |
| */ |
| struct ArcProto *arc_proto_map[256], *arc_proto_default, |
| *arc_bcast_proto, *arc_raw_proto; |
| |
| static struct ArcProto arc_proto_null = |
| { |
| .suffix = '?', |
| .mtu = XMTU, |
| .is_ip = 0, |
| .rx = null_rx, |
| .build_header = null_build_header, |
| .prepare_tx = null_prepare_tx, |
| .continue_tx = NULL, |
| .ack_tx = NULL |
| }; |
| |
| /* Exported function prototypes */ |
| int arcnet_debug = ARCNET_DEBUG; |
| |
| EXPORT_SYMBOL(arc_proto_map); |
| EXPORT_SYMBOL(arc_proto_default); |
| EXPORT_SYMBOL(arc_bcast_proto); |
| EXPORT_SYMBOL(arc_raw_proto); |
| EXPORT_SYMBOL(arcnet_unregister_proto); |
| EXPORT_SYMBOL(arcnet_debug); |
| EXPORT_SYMBOL(alloc_arcdev); |
| EXPORT_SYMBOL(arcnet_interrupt); |
| EXPORT_SYMBOL(arcnet_open); |
| EXPORT_SYMBOL(arcnet_close); |
| EXPORT_SYMBOL(arcnet_send_packet); |
| EXPORT_SYMBOL(arcnet_timeout); |
| |
| /* Internal function prototypes */ |
| static int arcnet_header(struct sk_buff *skb, struct net_device *dev, |
| unsigned short type, const void *daddr, |
| const void *saddr, unsigned len); |
| static int arcnet_rebuild_header(struct sk_buff *skb); |
| static int go_tx(struct net_device *dev); |
| |
| static int debug = ARCNET_DEBUG; |
| module_param(debug, int, 0); |
| MODULE_LICENSE("GPL"); |
| |
| static int __init arcnet_init(void) |
| { |
| int count; |
| |
| arcnet_debug = debug; |
| |
| printk("arcnet loaded.\n"); |
| |
| #ifdef ALPHA_WARNING |
| BUGLVL(D_EXTRA) { |
| printk("arcnet: ***\n" |
| "arcnet: * Read arcnet.txt for important release notes!\n" |
| "arcnet: *\n" |
| "arcnet: * This is an ALPHA version! (Last stable release: v3.02) E-mail\n" |
| "arcnet: * me if you have any questions, comments, or bug reports.\n" |
| "arcnet: ***\n"); |
| } |
| #endif |
| |
| /* initialize the protocol map */ |
| arc_raw_proto = arc_proto_default = arc_bcast_proto = &arc_proto_null; |
| for (count = 0; count < 256; count++) |
| arc_proto_map[count] = arc_proto_default; |
| |
| BUGLVL(D_DURING) |
| printk("arcnet: struct sizes: %Zd %Zd %Zd %Zd %Zd\n", |
| sizeof(struct arc_hardware), sizeof(struct arc_rfc1201), |
| sizeof(struct arc_rfc1051), sizeof(struct arc_eth_encap), |
| sizeof(struct archdr)); |
| |
| return 0; |
| } |
| |
| static void __exit arcnet_exit(void) |
| { |
| } |
| |
| module_init(arcnet_init); |
| module_exit(arcnet_exit); |
| |
| /* |
| * Dump the contents of an sk_buff |
| */ |
| #if ARCNET_DEBUG_MAX & D_SKB |
| void arcnet_dump_skb(struct net_device *dev, |
| struct sk_buff *skb, char *desc) |
| { |
| char hdr[32]; |
| |
| /* dump the packet */ |
| snprintf(hdr, sizeof(hdr), "%6s:%s skb->data:", dev->name, desc); |
| print_hex_dump(KERN_DEBUG, hdr, DUMP_PREFIX_OFFSET, |
| 16, 1, skb->data, skb->len, true); |
| } |
| |
| EXPORT_SYMBOL(arcnet_dump_skb); |
| #endif |
| |
| |
| /* |
| * Dump the contents of an ARCnet buffer |
| */ |
| #if (ARCNET_DEBUG_MAX & (D_RX | D_TX)) |
| static void arcnet_dump_packet(struct net_device *dev, int bufnum, |
| char *desc, int take_arcnet_lock) |
| { |
| struct arcnet_local *lp = netdev_priv(dev); |
| int i, length; |
| unsigned long flags = 0; |
| static uint8_t buf[512]; |
| char hdr[32]; |
| |
| /* hw.copy_from_card expects IRQ context so take the IRQ lock |
| to keep it single threaded */ |
| if(take_arcnet_lock) |
| spin_lock_irqsave(&lp->lock, flags); |
| |
| lp->hw.copy_from_card(dev, bufnum, 0, buf, 512); |
| if(take_arcnet_lock) |
| spin_unlock_irqrestore(&lp->lock, flags); |
| |
| /* if the offset[0] byte is nonzero, this is a 256-byte packet */ |
| length = (buf[2] ? 256 : 512); |
| |
| /* dump the packet */ |
| snprintf(hdr, sizeof(hdr), "%6s:%s packet dump:", dev->name, desc); |
| print_hex_dump(KERN_DEBUG, hdr, DUMP_PREFIX_OFFSET, |
| 16, 1, buf, length, true); |
| } |
| |
| #else |
| |
| #define arcnet_dump_packet(dev, bufnum, desc,take_arcnet_lock) do { } while (0) |
| |
| #endif |
| |
| |
| /* |
| * Unregister a protocol driver from the arc_proto_map. Protocol drivers |
| * are responsible for registering themselves, but the unregister routine |
| * is pretty generic so we'll do it here. |
| */ |
| void arcnet_unregister_proto(struct ArcProto *proto) |
| { |
| int count; |
| |
| if (arc_proto_default == proto) |
| arc_proto_default = &arc_proto_null; |
| if (arc_bcast_proto == proto) |
| arc_bcast_proto = arc_proto_default; |
| if (arc_raw_proto == proto) |
| arc_raw_proto = arc_proto_default; |
| |
| for (count = 0; count < 256; count++) { |
| if (arc_proto_map[count] == proto) |
| arc_proto_map[count] = arc_proto_default; |
| } |
| } |
| |
| |
| /* |
| * Add a buffer to the queue. Only the interrupt handler is allowed to do |
| * this, unless interrupts are disabled. |
| * |
| * Note: we don't check for a full queue, since there aren't enough buffers |
| * to more than fill it. |
| */ |
| static void release_arcbuf(struct net_device *dev, int bufnum) |
| { |
| struct arcnet_local *lp = netdev_priv(dev); |
| int i; |
| |
| lp->buf_queue[lp->first_free_buf++] = bufnum; |
| lp->first_free_buf %= 5; |
| |
| BUGLVL(D_DURING) { |
| BUGMSG(D_DURING, "release_arcbuf: freed #%d; buffer queue is now: ", |
| bufnum); |
| for (i = lp->next_buf; i != lp->first_free_buf; i = (i+1) % 5) |
| BUGMSG2(D_DURING, "#%d ", lp->buf_queue[i]); |
| BUGMSG2(D_DURING, "\n"); |
| } |
| } |
| |
| |
| /* |
| * Get a buffer from the queue. If this returns -1, there are no buffers |
| * available. |
| */ |
| static int get_arcbuf(struct net_device *dev) |
| { |
| struct arcnet_local *lp = netdev_priv(dev); |
| int buf = -1, i; |
| |
| if (!atomic_dec_and_test(&lp->buf_lock)) { |
| /* already in this function */ |
| BUGMSG(D_NORMAL, "get_arcbuf: overlap (%d)!\n", |
| lp->buf_lock.counter); |
| } |
| else { /* we can continue */ |
| if (lp->next_buf >= 5) |
| lp->next_buf -= 5; |
| |
| if (lp->next_buf == lp->first_free_buf) |
| BUGMSG(D_NORMAL, "get_arcbuf: BUG: no buffers are available??\n"); |
| else { |
| buf = lp->buf_queue[lp->next_buf++]; |
| lp->next_buf %= 5; |
| } |
| } |
| |
| |
| BUGLVL(D_DURING) { |
| BUGMSG(D_DURING, "get_arcbuf: got #%d; buffer queue is now: ", buf); |
| for (i = lp->next_buf; i != lp->first_free_buf; i = (i+1) % 5) |
| BUGMSG2(D_DURING, "#%d ", lp->buf_queue[i]); |
| BUGMSG2(D_DURING, "\n"); |
| } |
| |
| atomic_inc(&lp->buf_lock); |
| return buf; |
| } |
| |
| |
| static int choose_mtu(void) |
| { |
| int count, mtu = 65535; |
| |
| /* choose the smallest MTU of all available encaps */ |
| for (count = 0; count < 256; count++) { |
| if (arc_proto_map[count] != &arc_proto_null && |
| arc_proto_map[count]->mtu < mtu) { |
| mtu = arc_proto_map[count]->mtu; |
| } |
| } |
| |
| return mtu == 65535 ? XMTU : mtu; |
| } |
| |
| static const struct header_ops arcnet_header_ops = { |
| .create = arcnet_header, |
| .rebuild = arcnet_rebuild_header, |
| }; |
| |
| static const struct net_device_ops arcnet_netdev_ops = { |
| .ndo_open = arcnet_open, |
| .ndo_stop = arcnet_close, |
| .ndo_start_xmit = arcnet_send_packet, |
| .ndo_tx_timeout = arcnet_timeout, |
| }; |
| |
| /* Setup a struct device for ARCnet. */ |
| static void arcdev_setup(struct net_device *dev) |
| { |
| dev->type = ARPHRD_ARCNET; |
| dev->netdev_ops = &arcnet_netdev_ops; |
| dev->header_ops = &arcnet_header_ops; |
| dev->hard_header_len = sizeof(struct archdr); |
| dev->mtu = choose_mtu(); |
| |
| dev->addr_len = ARCNET_ALEN; |
| dev->tx_queue_len = 100; |
| dev->broadcast[0] = 0x00; /* for us, broadcasts are address 0 */ |
| dev->watchdog_timeo = TX_TIMEOUT; |
| |
| /* New-style flags. */ |
| dev->flags = IFF_BROADCAST; |
| |
| } |
| |
| struct net_device *alloc_arcdev(const char *name) |
| { |
| struct net_device *dev; |
| |
| dev = alloc_netdev(sizeof(struct arcnet_local), |
| name && *name ? name : "arc%d", arcdev_setup); |
| if(dev) { |
| struct arcnet_local *lp = netdev_priv(dev); |
| spin_lock_init(&lp->lock); |
| } |
| |
| return dev; |
| } |
| |
| /* |
| * Open/initialize the board. This is called sometime after booting when |
| * the 'ifconfig' program is run. |
| * |
| * This routine should set everything up anew at each open, even registers |
| * that "should" only need to be set once at boot, so that there is |
| * non-reboot way to recover if something goes wrong. |
| */ |
| int arcnet_open(struct net_device *dev) |
| { |
| struct arcnet_local *lp = netdev_priv(dev); |
| int count, newmtu, error; |
| |
| BUGMSG(D_INIT,"opened."); |
| |
| if (!try_module_get(lp->hw.owner)) |
| return -ENODEV; |
| |
| BUGLVL(D_PROTO) { |
| BUGMSG(D_PROTO, "protocol map (default is '%c'): ", |
| arc_proto_default->suffix); |
| for (count = 0; count < 256; count++) |
| BUGMSG2(D_PROTO, "%c", arc_proto_map[count]->suffix); |
| BUGMSG2(D_PROTO, "\n"); |
| } |
| |
| |
| BUGMSG(D_INIT, "arcnet_open: resetting card.\n"); |
| |
| /* try to put the card in a defined state - if it fails the first |
| * time, actually reset it. |
| */ |
| error = -ENODEV; |
| if (ARCRESET(0) && ARCRESET(1)) |
| goto out_module_put; |
| |
| newmtu = choose_mtu(); |
| if (newmtu < dev->mtu) |
| dev->mtu = newmtu; |
| |
| BUGMSG(D_INIT, "arcnet_open: mtu: %d.\n", dev->mtu); |
| |
| /* autodetect the encapsulation for each host. */ |
| memset(lp->default_proto, 0, sizeof(lp->default_proto)); |
| |
| /* the broadcast address is special - use the 'bcast' protocol */ |
| for (count = 0; count < 256; count++) { |
| if (arc_proto_map[count] == arc_bcast_proto) { |
| lp->default_proto[0] = count; |
| break; |
| } |
| } |
| |
| /* initialize buffers */ |
| atomic_set(&lp->buf_lock, 1); |
| |
| lp->next_buf = lp->first_free_buf = 0; |
| release_arcbuf(dev, 0); |
| release_arcbuf(dev, 1); |
| release_arcbuf(dev, 2); |
| release_arcbuf(dev, 3); |
| lp->cur_tx = lp->next_tx = -1; |
| lp->cur_rx = -1; |
| |
| lp->rfc1201.sequence = 1; |
| |
| /* bring up the hardware driver */ |
| if (lp->hw.open) |
| lp->hw.open(dev); |
| |
| if (dev->dev_addr[0] == 0) |
| BUGMSG(D_NORMAL, "WARNING! Station address 00 is reserved " |
| "for broadcasts!\n"); |
| else if (dev->dev_addr[0] == 255) |
| BUGMSG(D_NORMAL, "WARNING! Station address FF may confuse " |
| "DOS networking programs!\n"); |
| |
| BUGMSG(D_DEBUG, "%s: %d: %s\n",__FILE__,__LINE__,__func__); |
| if (ASTATUS() & RESETflag) { |
| BUGMSG(D_DEBUG, "%s: %d: %s\n",__FILE__,__LINE__,__func__); |
| ACOMMAND(CFLAGScmd | RESETclear); |
| } |
| |
| |
| BUGMSG(D_DEBUG, "%s: %d: %s\n",__FILE__,__LINE__,__func__); |
| /* make sure we're ready to receive IRQ's. */ |
| AINTMASK(0); |
| udelay(1); /* give it time to set the mask before |
| * we reset it again. (may not even be |
| * necessary) |
| */ |
| BUGMSG(D_DEBUG, "%s: %d: %s\n",__FILE__,__LINE__,__func__); |
| lp->intmask = NORXflag | RECONflag; |
| AINTMASK(lp->intmask); |
| BUGMSG(D_DEBUG, "%s: %d: %s\n",__FILE__,__LINE__,__func__); |
| |
| netif_start_queue(dev); |
| |
| return 0; |
| |
| out_module_put: |
| module_put(lp->hw.owner); |
| return error; |
| } |
| |
| |
| /* The inverse routine to arcnet_open - shuts down the card. */ |
| int arcnet_close(struct net_device *dev) |
| { |
| struct arcnet_local *lp = netdev_priv(dev); |
| |
| netif_stop_queue(dev); |
| |
| /* flush TX and disable RX */ |
| AINTMASK(0); |
| ACOMMAND(NOTXcmd); /* stop transmit */ |
| ACOMMAND(NORXcmd); /* disable receive */ |
| mdelay(1); |
| |
| /* shut down the card */ |
| lp->hw.close(dev); |
| module_put(lp->hw.owner); |
| return 0; |
| } |
| |
| |
| static int arcnet_header(struct sk_buff *skb, struct net_device *dev, |
| unsigned short type, const void *daddr, |
| const void *saddr, unsigned len) |
| { |
| const struct arcnet_local *lp = netdev_priv(dev); |
| uint8_t _daddr, proto_num; |
| struct ArcProto *proto; |
| |
| BUGMSG(D_DURING, |
| "create header from %d to %d; protocol %d (%Xh); size %u.\n", |
| saddr ? *(uint8_t *) saddr : -1, |
| daddr ? *(uint8_t *) daddr : -1, |
| type, type, len); |
| |
| if (skb->len!=0 && len != skb->len) |
| BUGMSG(D_NORMAL, "arcnet_header: Yikes! skb->len(%d) != len(%d)!\n", |
| skb->len, len); |
| |
| |
| /* Type is host order - ? */ |
| if(type == ETH_P_ARCNET) { |
| proto = arc_raw_proto; |
| BUGMSG(D_DEBUG, "arc_raw_proto used. proto='%c'\n",proto->suffix); |
| _daddr = daddr ? *(uint8_t *) daddr : 0; |
| } |
| else if (!daddr) { |
| /* |
| * if the dest addr isn't provided, we can't choose an encapsulation! |
| * Store the packet type (eg. ETH_P_IP) for now, and we'll push on a |
| * real header when we do rebuild_header. |
| */ |
| *(uint16_t *) skb_push(skb, 2) = type; |
| /* |
| * XXX: Why not use skb->mac_len? |
| */ |
| if (skb->network_header - skb->mac_header != 2) |
| BUGMSG(D_NORMAL, "arcnet_header: Yikes! diff (%d) is not 2!\n", |
| (int)(skb->network_header - skb->mac_header)); |
| return -2; /* return error -- can't transmit yet! */ |
| } |
| else { |
| /* otherwise, we can just add the header as usual. */ |
| _daddr = *(uint8_t *) daddr; |
| proto_num = lp->default_proto[_daddr]; |
| proto = arc_proto_map[proto_num]; |
| BUGMSG(D_DURING, "building header for %02Xh using protocol '%c'\n", |
| proto_num, proto->suffix); |
| if (proto == &arc_proto_null && arc_bcast_proto != proto) { |
| BUGMSG(D_DURING, "actually, let's use '%c' instead.\n", |
| arc_bcast_proto->suffix); |
| proto = arc_bcast_proto; |
| } |
| } |
| return proto->build_header(skb, dev, type, _daddr); |
| } |
| |
| |
| /* |
| * Rebuild the ARCnet hard header. This is called after an ARP (or in the |
| * future other address resolution) has completed on this sk_buff. We now |
| * let ARP fill in the destination field. |
| */ |
| static int arcnet_rebuild_header(struct sk_buff *skb) |
| { |
| struct net_device *dev = skb->dev; |
| struct arcnet_local *lp = netdev_priv(dev); |
| int status = 0; /* default is failure */ |
| unsigned short type; |
| uint8_t daddr=0; |
| struct ArcProto *proto; |
| /* |
| * XXX: Why not use skb->mac_len? |
| */ |
| if (skb->network_header - skb->mac_header != 2) { |
| BUGMSG(D_NORMAL, |
| "rebuild_header: shouldn't be here! (hdrsize=%d)\n", |
| (int)(skb->network_header - skb->mac_header)); |
| return 0; |
| } |
| type = *(uint16_t *) skb_pull(skb, 2); |
| BUGMSG(D_DURING, "rebuild header for protocol %Xh\n", type); |
| |
| if (type == ETH_P_IP) { |
| #ifdef CONFIG_INET |
| BUGMSG(D_DURING, "rebuild header for ethernet protocol %Xh\n", type); |
| status = arp_find(&daddr, skb) ? 1 : 0; |
| BUGMSG(D_DURING, " rebuilt: dest is %d; protocol %Xh\n", |
| daddr, type); |
| #endif |
| } else { |
| BUGMSG(D_NORMAL, |
| "I don't understand ethernet protocol %Xh addresses!\n", type); |
| dev->stats.tx_errors++; |
| dev->stats.tx_aborted_errors++; |
| } |
| |
| /* if we couldn't resolve the address... give up. */ |
| if (!status) |
| return 0; |
| |
| /* add the _real_ header this time! */ |
| proto = arc_proto_map[lp->default_proto[daddr]]; |
| proto->build_header(skb, dev, type, daddr); |
| |
| return 1; /* success */ |
| } |
| |
| |
| |
| /* Called by the kernel in order to transmit a packet. */ |
| netdev_tx_t arcnet_send_packet(struct sk_buff *skb, |
| struct net_device *dev) |
| { |
| struct arcnet_local *lp = netdev_priv(dev); |
| struct archdr *pkt; |
| struct arc_rfc1201 *soft; |
| struct ArcProto *proto; |
| int txbuf; |
| unsigned long flags; |
| int freeskb, retval; |
| |
| BUGMSG(D_DURING, |
| "transmit requested (status=%Xh, txbufs=%d/%d, len=%d, protocol %x)\n", |
| ASTATUS(), lp->cur_tx, lp->next_tx, skb->len,skb->protocol); |
| |
| pkt = (struct archdr *) skb->data; |
| soft = &pkt->soft.rfc1201; |
| proto = arc_proto_map[soft->proto]; |
| |
| BUGMSG(D_SKB_SIZE, "skb: transmitting %d bytes to %02X\n", |
| skb->len, pkt->hard.dest); |
| BUGLVL(D_SKB) arcnet_dump_skb(dev, skb, "tx"); |
| |
| /* fits in one packet? */ |
| if (skb->len - ARC_HDR_SIZE > XMTU && !proto->continue_tx) { |
| BUGMSG(D_NORMAL, "fixme: packet too large: compensating badly!\n"); |
| dev_kfree_skb(skb); |
| return NETDEV_TX_OK; /* don't try again */ |
| } |
| |
| /* We're busy transmitting a packet... */ |
| netif_stop_queue(dev); |
| |
| spin_lock_irqsave(&lp->lock, flags); |
| AINTMASK(0); |
| if(lp->next_tx == -1) |
| txbuf = get_arcbuf(dev); |
| else { |
| txbuf = -1; |
| } |
| if (txbuf != -1) { |
| if (proto->prepare_tx(dev, pkt, skb->len, txbuf) && |
| !proto->ack_tx) { |
| /* done right away and we don't want to acknowledge |
| the package later - forget about it now */ |
| dev->stats.tx_bytes += skb->len; |
| freeskb = 1; |
| } else { |
| /* do it the 'split' way */ |
| lp->outgoing.proto = proto; |
| lp->outgoing.skb = skb; |
| lp->outgoing.pkt = pkt; |
| |
| freeskb = 0; |
| |
| if (proto->continue_tx && |
| proto->continue_tx(dev, txbuf)) { |
| BUGMSG(D_NORMAL, |
| "bug! continue_tx finished the first time! " |
| "(proto='%c')\n", proto->suffix); |
| } |
| } |
| retval = NETDEV_TX_OK; |
| lp->next_tx = txbuf; |
| } else { |
| retval = NETDEV_TX_BUSY; |
| freeskb = 0; |
| } |
| |
| BUGMSG(D_DEBUG, "%s: %d: %s, status: %x\n",__FILE__,__LINE__,__func__,ASTATUS()); |
| /* make sure we didn't ignore a TX IRQ while we were in here */ |
| AINTMASK(0); |
| |
| BUGMSG(D_DEBUG, "%s: %d: %s\n",__FILE__,__LINE__,__func__); |
| lp->intmask |= TXFREEflag|EXCNAKflag; |
| AINTMASK(lp->intmask); |
| BUGMSG(D_DEBUG, "%s: %d: %s, status: %x\n",__FILE__,__LINE__,__func__,ASTATUS()); |
| |
| spin_unlock_irqrestore(&lp->lock, flags); |
| if (freeskb) { |
| dev_kfree_skb(skb); |
| } |
| return retval; /* no need to try again */ |
| } |
| |
| |
| /* |
| * Actually start transmitting a packet that was loaded into a buffer |
| * by prepare_tx. This should _only_ be called by the interrupt handler. |
| */ |
| static int go_tx(struct net_device *dev) |
| { |
| struct arcnet_local *lp = netdev_priv(dev); |
| |
| BUGMSG(D_DURING, "go_tx: status=%Xh, intmask=%Xh, next_tx=%d, cur_tx=%d\n", |
| ASTATUS(), lp->intmask, lp->next_tx, lp->cur_tx); |
| |
| if (lp->cur_tx != -1 || lp->next_tx == -1) |
| return 0; |
| |
| BUGLVL(D_TX) arcnet_dump_packet(dev, lp->next_tx, "go_tx", 0); |
| |
| lp->cur_tx = lp->next_tx; |
| lp->next_tx = -1; |
| |
| /* start sending */ |
| ACOMMAND(TXcmd | (lp->cur_tx << 3)); |
| |
| dev->stats.tx_packets++; |
| lp->lasttrans_dest = lp->lastload_dest; |
| lp->lastload_dest = 0; |
| lp->excnak_pending = 0; |
| lp->intmask |= TXFREEflag|EXCNAKflag; |
| |
| return 1; |
| } |
| |
| |
| /* Called by the kernel when transmit times out */ |
| void arcnet_timeout(struct net_device *dev) |
| { |
| unsigned long flags; |
| struct arcnet_local *lp = netdev_priv(dev); |
| int status = ASTATUS(); |
| char *msg; |
| |
| spin_lock_irqsave(&lp->lock, flags); |
| if (status & TXFREEflag) { /* transmit _DID_ finish */ |
| msg = " - missed IRQ?"; |
| } else { |
| msg = ""; |
| dev->stats.tx_aborted_errors++; |
| lp->timed_out = 1; |
| ACOMMAND(NOTXcmd | (lp->cur_tx << 3)); |
| } |
| dev->stats.tx_errors++; |
| |
| /* make sure we didn't miss a TX or a EXC NAK IRQ */ |
| AINTMASK(0); |
| lp->intmask |= TXFREEflag|EXCNAKflag; |
| AINTMASK(lp->intmask); |
| |
| spin_unlock_irqrestore(&lp->lock, flags); |
| |
| if (time_after(jiffies, lp->last_timeout + 10*HZ)) { |
| BUGMSG(D_EXTRA, "tx timed out%s (status=%Xh, intmask=%Xh, dest=%02Xh)\n", |
| msg, status, lp->intmask, lp->lasttrans_dest); |
| lp->last_timeout = jiffies; |
| } |
| |
| if (lp->cur_tx == -1) |
| netif_wake_queue(dev); |
| } |
| |
| |
| /* |
| * The typical workload of the driver: Handle the network interface |
| * interrupts. Establish which device needs attention, and call the correct |
| * chipset interrupt handler. |
| */ |
| irqreturn_t arcnet_interrupt(int irq, void *dev_id) |
| { |
| struct net_device *dev = dev_id; |
| struct arcnet_local *lp; |
| int recbuf, status, diagstatus, didsomething, boguscount; |
| int retval = IRQ_NONE; |
| |
| BUGMSG(D_DURING, "\n"); |
| |
| BUGMSG(D_DURING, "in arcnet_interrupt\n"); |
| |
| lp = netdev_priv(dev); |
| BUG_ON(!lp); |
| |
| spin_lock(&lp->lock); |
| |
| /* |
| * RESET flag was enabled - if device is not running, we must clear it right |
| * away (but nothing else). |
| */ |
| if (!netif_running(dev)) { |
| if (ASTATUS() & RESETflag) |
| ACOMMAND(CFLAGScmd | RESETclear); |
| AINTMASK(0); |
| spin_unlock(&lp->lock); |
| return IRQ_HANDLED; |
| } |
| |
| BUGMSG(D_DURING, "in arcnet_inthandler (status=%Xh, intmask=%Xh)\n", |
| ASTATUS(), lp->intmask); |
| |
| boguscount = 5; |
| do { |
| status = ASTATUS(); |
| diagstatus = (status >> 8) & 0xFF; |
| |
| BUGMSG(D_DEBUG, "%s: %d: %s: status=%x\n", |
| __FILE__,__LINE__,__func__,status); |
| didsomething = 0; |
| |
| /* |
| * RESET flag was enabled - card is resetting and if RX is |
| * disabled, it's NOT because we just got a packet. |
| * |
| * The card is in an undefined state. Clear it out and start over. |
| */ |
| if (status & RESETflag) { |
| BUGMSG(D_NORMAL, "spurious reset (status=%Xh)\n", status); |
| arcnet_close(dev); |
| arcnet_open(dev); |
| |
| /* get out of the interrupt handler! */ |
| break; |
| } |
| /* |
| * RX is inhibited - we must have received something. Prepare to |
| * receive into the next buffer. |
| * |
| * We don't actually copy the received packet from the card until |
| * after the transmit handler runs (and possibly launches the next |
| * tx); this should improve latency slightly if we get both types |
| * of interrupts at once. |
| */ |
| recbuf = -1; |
| if (status & lp->intmask & NORXflag) { |
| recbuf = lp->cur_rx; |
| BUGMSG(D_DURING, "Buffer #%d: receive irq (status=%Xh)\n", |
| recbuf, status); |
| |
| lp->cur_rx = get_arcbuf(dev); |
| if (lp->cur_rx != -1) { |
| BUGMSG(D_DURING, "enabling receive to buffer #%d\n", |
| lp->cur_rx); |
| ACOMMAND(RXcmd | (lp->cur_rx << 3) | RXbcasts); |
| } |
| didsomething++; |
| } |
| |
| if((diagstatus & EXCNAKflag)) { |
| BUGMSG(D_DURING, "EXCNAK IRQ (diagstat=%Xh)\n", |
| diagstatus); |
| |
| ACOMMAND(NOTXcmd); /* disable transmit */ |
| lp->excnak_pending = 1; |
| |
| ACOMMAND(EXCNAKclear); |
| lp->intmask &= ~(EXCNAKflag); |
| didsomething++; |
| } |
| |
| |
| /* a transmit finished, and we're interested in it. */ |
| if ((status & lp->intmask & TXFREEflag) || lp->timed_out) { |
| lp->intmask &= ~(TXFREEflag|EXCNAKflag); |
| |
| BUGMSG(D_DURING, "TX IRQ (stat=%Xh)\n", status); |
| |
| if (lp->cur_tx != -1 && !lp->timed_out) { |
| if(!(status & TXACKflag)) { |
| if (lp->lasttrans_dest != 0) { |
| BUGMSG(D_EXTRA, |
| "transmit was not acknowledged! " |
| "(status=%Xh, dest=%02Xh)\n", |
| status, lp->lasttrans_dest); |
| dev->stats.tx_errors++; |
| dev->stats.tx_carrier_errors++; |
| } else { |
| BUGMSG(D_DURING, |
| "broadcast was not acknowledged; that's normal " |
| "(status=%Xh, dest=%02Xh)\n", |
| status, lp->lasttrans_dest); |
| } |
| } |
| |
| if (lp->outgoing.proto && |
| lp->outgoing.proto->ack_tx) { |
| int ackstatus; |
| if(status & TXACKflag) |
| ackstatus=2; |
| else if(lp->excnak_pending) |
| ackstatus=1; |
| else |
| ackstatus=0; |
| |
| lp->outgoing.proto |
| ->ack_tx(dev, ackstatus); |
| } |
| } |
| if (lp->cur_tx != -1) |
| release_arcbuf(dev, lp->cur_tx); |
| |
| lp->cur_tx = -1; |
| lp->timed_out = 0; |
| didsomething++; |
| |
| /* send another packet if there is one */ |
| go_tx(dev); |
| |
| /* continue a split packet, if any */ |
| if (lp->outgoing.proto && lp->outgoing.proto->continue_tx) { |
| int txbuf = get_arcbuf(dev); |
| if (txbuf != -1) { |
| if (lp->outgoing.proto->continue_tx(dev, txbuf)) { |
| /* that was the last segment */ |
| dev->stats.tx_bytes += lp->outgoing.skb->len; |
| if(!lp->outgoing.proto->ack_tx) |
| { |
| dev_kfree_skb_irq(lp->outgoing.skb); |
| lp->outgoing.proto = NULL; |
| } |
| } |
| lp->next_tx = txbuf; |
| } |
| } |
| /* inform upper layers of idleness, if necessary */ |
| if (lp->cur_tx == -1) |
| netif_wake_queue(dev); |
| } |
| /* now process the received packet, if any */ |
| if (recbuf != -1) { |
| BUGLVL(D_RX) arcnet_dump_packet(dev, recbuf, "rx irq", 0); |
| |
| arcnet_rx(dev, recbuf); |
| release_arcbuf(dev, recbuf); |
| |
| didsomething++; |
| } |
| if (status & lp->intmask & RECONflag) { |
| ACOMMAND(CFLAGScmd | CONFIGclear); |
| dev->stats.tx_carrier_errors++; |
| |
| BUGMSG(D_RECON, "Network reconfiguration detected (status=%Xh)\n", |
| status); |
| /* MYRECON bit is at bit 7 of diagstatus */ |
| if(diagstatus & 0x80) |
| BUGMSG(D_RECON,"Put out that recon myself\n"); |
| |
| /* is the RECON info empty or old? */ |
| if (!lp->first_recon || !lp->last_recon || |
| time_after(jiffies, lp->last_recon + HZ * 10)) { |
| if (lp->network_down) |
| BUGMSG(D_NORMAL, "reconfiguration detected: cabling restored?\n"); |
| lp->first_recon = lp->last_recon = jiffies; |
| lp->num_recons = lp->network_down = 0; |
| |
| BUGMSG(D_DURING, "recon: clearing counters.\n"); |
| } else { /* add to current RECON counter */ |
| lp->last_recon = jiffies; |
| lp->num_recons++; |
| |
| BUGMSG(D_DURING, "recon: counter=%d, time=%lds, net=%d\n", |
| lp->num_recons, |
| (lp->last_recon - lp->first_recon) / HZ, |
| lp->network_down); |
| |
| /* if network is marked up; |
| * and first_recon and last_recon are 60+ apart; |
| * and the average no. of recons counted is |
| * > RECON_THRESHOLD/min; |
| * then print a warning message. |
| */ |
| if (!lp->network_down && |
| (lp->last_recon - lp->first_recon) <= HZ * 60 && |
| lp->num_recons >= RECON_THRESHOLD) { |
| lp->network_down = 1; |
| BUGMSG(D_NORMAL, "many reconfigurations detected: cabling problem?\n"); |
| } else if (!lp->network_down && |
| lp->last_recon - lp->first_recon > HZ * 60) { |
| /* reset counters if we've gone for over a minute. */ |
| lp->first_recon = lp->last_recon; |
| lp->num_recons = 1; |
| } |
| } |
| } else if (lp->network_down && |
| time_after(jiffies, lp->last_recon + HZ * 10)) { |
| if (lp->network_down) |
| BUGMSG(D_NORMAL, "cabling restored?\n"); |
| lp->first_recon = lp->last_recon = 0; |
| lp->num_recons = lp->network_down = 0; |
| |
| BUGMSG(D_DURING, "not recon: clearing counters anyway.\n"); |
| } |
| |
| if(didsomething) { |
| retval |= IRQ_HANDLED; |
| } |
| } |
| while (--boguscount && didsomething); |
| |
| BUGMSG(D_DURING, "arcnet_interrupt complete (status=%Xh, count=%d)\n", |
| ASTATUS(), boguscount); |
| BUGMSG(D_DURING, "\n"); |
| |
| |
| AINTMASK(0); |
| udelay(1); |
| AINTMASK(lp->intmask); |
| |
| spin_unlock(&lp->lock); |
| return retval; |
| } |
| |
| |
| /* |
| * This is a generic packet receiver that calls arcnet??_rx depending on the |
| * protocol ID found. |
| */ |
| static void arcnet_rx(struct net_device *dev, int bufnum) |
| { |
| struct arcnet_local *lp = netdev_priv(dev); |
| struct archdr pkt; |
| struct arc_rfc1201 *soft; |
| int length, ofs; |
| |
| soft = &pkt.soft.rfc1201; |
| |
| lp->hw.copy_from_card(dev, bufnum, 0, &pkt, sizeof(ARC_HDR_SIZE)); |
| if (pkt.hard.offset[0]) { |
| ofs = pkt.hard.offset[0]; |
| length = 256 - ofs; |
| } else { |
| ofs = pkt.hard.offset[1]; |
| length = 512 - ofs; |
| } |
| |
| /* get the full header, if possible */ |
| if (sizeof(pkt.soft) <= length) |
| lp->hw.copy_from_card(dev, bufnum, ofs, soft, sizeof(pkt.soft)); |
| else { |
| memset(&pkt.soft, 0, sizeof(pkt.soft)); |
| lp->hw.copy_from_card(dev, bufnum, ofs, soft, length); |
| } |
| |
| BUGMSG(D_DURING, "Buffer #%d: received packet from %02Xh to %02Xh " |
| "(%d+4 bytes)\n", |
| bufnum, pkt.hard.source, pkt.hard.dest, length); |
| |
| dev->stats.rx_packets++; |
| dev->stats.rx_bytes += length + ARC_HDR_SIZE; |
| |
| /* call the right receiver for the protocol */ |
| if (arc_proto_map[soft->proto]->is_ip) { |
| BUGLVL(D_PROTO) { |
| struct ArcProto |
| *oldp = arc_proto_map[lp->default_proto[pkt.hard.source]], |
| *newp = arc_proto_map[soft->proto]; |
| |
| if (oldp != newp) { |
| BUGMSG(D_PROTO, |
| "got protocol %02Xh; encap for host %02Xh is now '%c'" |
| " (was '%c')\n", soft->proto, pkt.hard.source, |
| newp->suffix, oldp->suffix); |
| } |
| } |
| |
| /* broadcasts will always be done with the last-used encap. */ |
| lp->default_proto[0] = soft->proto; |
| |
| /* in striking contrast, the following isn't a hack. */ |
| lp->default_proto[pkt.hard.source] = soft->proto; |
| } |
| /* call the protocol-specific receiver. */ |
| arc_proto_map[soft->proto]->rx(dev, bufnum, &pkt, length); |
| } |
| |
| |
| static void null_rx(struct net_device *dev, int bufnum, |
| struct archdr *pkthdr, int length) |
| { |
| BUGMSG(D_PROTO, |
| "rx: don't know how to deal with proto %02Xh from host %02Xh.\n", |
| pkthdr->soft.rfc1201.proto, pkthdr->hard.source); |
| } |
| |
| |
| static int null_build_header(struct sk_buff *skb, struct net_device *dev, |
| unsigned short type, uint8_t daddr) |
| { |
| struct arcnet_local *lp = netdev_priv(dev); |
| |
| BUGMSG(D_PROTO, |
| "tx: can't build header for encap %02Xh; load a protocol driver.\n", |
| lp->default_proto[daddr]); |
| |
| /* always fails */ |
| return 0; |
| } |
| |
| |
| /* the "do nothing" prepare_tx function warns that there's nothing to do. */ |
| static int null_prepare_tx(struct net_device *dev, struct archdr *pkt, |
| int length, int bufnum) |
| { |
| struct arcnet_local *lp = netdev_priv(dev); |
| struct arc_hardware newpkt; |
| |
| BUGMSG(D_PROTO, "tx: no encap for this host; load a protocol driver.\n"); |
| |
| /* send a packet to myself -- will never get received, of course */ |
| newpkt.source = newpkt.dest = dev->dev_addr[0]; |
| |
| /* only one byte of actual data (and it's random) */ |
| newpkt.offset[0] = 0xFF; |
| |
| lp->hw.copy_to_card(dev, bufnum, 0, &newpkt, ARC_HDR_SIZE); |
| |
| return 1; /* done */ |
| } |