blob: 48651c6f657d58605ef5ab6ac54ec3ff03400ac0 [file] [log] [blame]
/*
* Some of the code in this file has been gleaned from the 64 bit
* discontigmem support code base.
*
* Copyright (C) 2002, IBM Corp.
*
* All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
* NON INFRINGEMENT. See the GNU General Public License for more
* details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*
* Send feedback to Pat Gaughen <gone@us.ibm.com>
*/
#include <linux/mm.h>
#include <linux/bootmem.h>
#include <linux/memblock.h>
#include <linux/mmzone.h>
#include <linux/acpi.h>
#include <linux/nodemask.h>
#include <asm/srat.h>
#include <asm/topology.h>
#include <asm/smp.h>
#include <asm/e820.h>
/*
* proximity macros and definitions
*/
#define NODE_ARRAY_INDEX(x) ((x) / 8) /* 8 bits/char */
#define NODE_ARRAY_OFFSET(x) ((x) % 8) /* 8 bits/char */
#define BMAP_SET(bmap, bit) ((bmap)[NODE_ARRAY_INDEX(bit)] |= 1 << NODE_ARRAY_OFFSET(bit))
#define BMAP_TEST(bmap, bit) ((bmap)[NODE_ARRAY_INDEX(bit)] & (1 << NODE_ARRAY_OFFSET(bit)))
/* bitmap length; _PXM is at most 255 */
#define PXM_BITMAP_LEN (MAX_PXM_DOMAINS / 8)
static u8 __initdata pxm_bitmap[PXM_BITMAP_LEN]; /* bitmap of proximity domains */
#define MAX_CHUNKS_PER_NODE 3
#define MAXCHUNKS (MAX_CHUNKS_PER_NODE * MAX_NUMNODES)
struct node_memory_chunk_s {
unsigned long start_pfn;
unsigned long end_pfn;
u8 pxm; // proximity domain of node
u8 nid; // which cnode contains this chunk?
u8 bank; // which mem bank on this node
};
static struct node_memory_chunk_s __initdata node_memory_chunk[MAXCHUNKS];
static int __initdata num_memory_chunks; /* total number of memory chunks */
static u8 __initdata apicid_to_pxm[MAX_LOCAL_APIC];
int acpi_numa __initdata;
static __init void bad_srat(void)
{
printk(KERN_ERR "SRAT: SRAT not used.\n");
acpi_numa = -1;
num_memory_chunks = 0;
}
static __init inline int srat_disabled(void)
{
return numa_off || acpi_numa < 0;
}
/* Identify CPU proximity domains */
void __init
acpi_numa_processor_affinity_init(struct acpi_srat_cpu_affinity *cpu_affinity)
{
if (srat_disabled())
return;
if (cpu_affinity->header.length !=
sizeof(struct acpi_srat_cpu_affinity)) {
bad_srat();
return;
}
if ((cpu_affinity->flags & ACPI_SRAT_CPU_ENABLED) == 0)
return; /* empty entry */
/* mark this node as "seen" in node bitmap */
BMAP_SET(pxm_bitmap, cpu_affinity->proximity_domain_lo);
/* don't need to check apic_id here, because it is always 8 bits */
apicid_to_pxm[cpu_affinity->apic_id] = cpu_affinity->proximity_domain_lo;
printk(KERN_DEBUG "CPU %02x in proximity domain %02x\n",
cpu_affinity->apic_id, cpu_affinity->proximity_domain_lo);
}
/*
* Identify memory proximity domains and hot-remove capabilities.
* Fill node memory chunk list structure.
*/
void __init
acpi_numa_memory_affinity_init(struct acpi_srat_mem_affinity *memory_affinity)
{
unsigned long long paddr, size;
unsigned long start_pfn, end_pfn;
u8 pxm;
struct node_memory_chunk_s *p, *q, *pend;
if (srat_disabled())
return;
if (memory_affinity->header.length !=
sizeof(struct acpi_srat_mem_affinity)) {
bad_srat();
return;
}
if ((memory_affinity->flags & ACPI_SRAT_MEM_ENABLED) == 0)
return; /* empty entry */
pxm = memory_affinity->proximity_domain & 0xff;
/* mark this node as "seen" in node bitmap */
BMAP_SET(pxm_bitmap, pxm);
/* calculate info for memory chunk structure */
paddr = memory_affinity->base_address;
size = memory_affinity->length;
start_pfn = paddr >> PAGE_SHIFT;
end_pfn = (paddr + size) >> PAGE_SHIFT;
if (num_memory_chunks >= MAXCHUNKS) {
printk(KERN_WARNING "Too many mem chunks in SRAT."
" Ignoring %lld MBytes at %llx\n",
size/(1024*1024), paddr);
return;
}
/* Insertion sort based on base address */
pend = &node_memory_chunk[num_memory_chunks];
for (p = &node_memory_chunk[0]; p < pend; p++) {
if (start_pfn < p->start_pfn)
break;
}
if (p < pend) {
for (q = pend; q >= p; q--)
*(q + 1) = *q;
}
p->start_pfn = start_pfn;
p->end_pfn = end_pfn;
p->pxm = pxm;
num_memory_chunks++;
printk(KERN_DEBUG "Memory range %08lx to %08lx"
" in proximity domain %02x %s\n",
start_pfn, end_pfn,
pxm,
((memory_affinity->flags & ACPI_SRAT_MEM_HOT_PLUGGABLE) ?
"enabled and removable" : "enabled" ) );
}
/* Callback for SLIT parsing */
void __init acpi_numa_slit_init(struct acpi_table_slit *slit)
{
}
void acpi_numa_arch_fixup(void)
{
}
/*
* The SRAT table always lists ascending addresses, so can always
* assume that the first "start" address that you see is the real
* start of the node, and that the current "end" address is after
* the previous one.
*/
static __init int node_read_chunk(int nid, struct node_memory_chunk_s *memory_chunk)
{
/*
* Only add present memory as told by the e820.
* There is no guarantee from the SRAT that the memory it
* enumerates is present at boot time because it represents
* *possible* memory hotplug areas the same as normal RAM.
*/
if (memory_chunk->start_pfn >= max_pfn) {
printk(KERN_INFO "Ignoring SRAT pfns: %08lx - %08lx\n",
memory_chunk->start_pfn, memory_chunk->end_pfn);
return -1;
}
if (memory_chunk->nid != nid)
return -1;
if (!node_has_online_mem(nid))
node_start_pfn[nid] = memory_chunk->start_pfn;
if (node_start_pfn[nid] > memory_chunk->start_pfn)
node_start_pfn[nid] = memory_chunk->start_pfn;
if (node_end_pfn[nid] < memory_chunk->end_pfn)
node_end_pfn[nid] = memory_chunk->end_pfn;
return 0;
}
int __init get_memcfg_from_srat(void)
{
int i, j, nid;
if (srat_disabled())
goto out_fail;
if (num_memory_chunks == 0) {
printk(KERN_DEBUG
"could not find any ACPI SRAT memory areas.\n");
goto out_fail;
}
/* Calculate total number of nodes in system from PXM bitmap and create
* a set of sequential node IDs starting at zero. (ACPI doesn't seem
* to specify the range of _PXM values.)
*/
/*
* MCD - we no longer HAVE to number nodes sequentially. PXM domain
* numbers could go as high as 256, and MAX_NUMNODES for i386 is typically
* 32, so we will continue numbering them in this manner until MAX_NUMNODES
* approaches MAX_PXM_DOMAINS for i386.
*/
nodes_clear(node_online_map);
for (i = 0; i < MAX_PXM_DOMAINS; i++) {
if (BMAP_TEST(pxm_bitmap, i)) {
int nid = acpi_map_pxm_to_node(i);
node_set_online(nid);
}
}
BUG_ON(num_online_nodes() == 0);
/* set cnode id in memory chunk structure */
for (i = 0; i < num_memory_chunks; i++)
node_memory_chunk[i].nid = pxm_to_node(node_memory_chunk[i].pxm);
printk(KERN_DEBUG "pxm bitmap: ");
for (i = 0; i < sizeof(pxm_bitmap); i++) {
printk(KERN_CONT "%02x ", pxm_bitmap[i]);
}
printk(KERN_CONT "\n");
printk(KERN_DEBUG "Number of logical nodes in system = %d\n",
num_online_nodes());
printk(KERN_DEBUG "Number of memory chunks in system = %d\n",
num_memory_chunks);
for (i = 0; i < MAX_LOCAL_APIC; i++)
set_apicid_to_node(i, pxm_to_node(apicid_to_pxm[i]));
for (j = 0; j < num_memory_chunks; j++){
struct node_memory_chunk_s * chunk = &node_memory_chunk[j];
printk(KERN_DEBUG
"chunk %d nid %d start_pfn %08lx end_pfn %08lx\n",
j, chunk->nid, chunk->start_pfn, chunk->end_pfn);
if (node_read_chunk(chunk->nid, chunk))
continue;
memblock_x86_register_active_regions(chunk->nid, chunk->start_pfn,
min(chunk->end_pfn, max_pfn));
}
/* for out of order entries in SRAT */
sort_node_map();
for_each_online_node(nid) {
unsigned long start = node_start_pfn[nid];
unsigned long end = min(node_end_pfn[nid], max_pfn);
memory_present(nid, start, end);
node_remap_size[nid] = node_memmap_size_bytes(nid, start, end);
}
return 1;
out_fail:
printk(KERN_DEBUG "failed to get NUMA memory information from SRAT"
" table\n");
return 0;
}