| /****************************************************************************** |
| |
| Copyright(c) 2003 - 2006 Intel Corporation. All rights reserved. |
| |
| This program is free software; you can redistribute it and/or modify it |
| under the terms of version 2 of the GNU General Public License as |
| published by the Free Software Foundation. |
| |
| This program is distributed in the hope that it will be useful, but WITHOUT |
| ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or |
| FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for |
| more details. |
| |
| You should have received a copy of the GNU General Public License along with |
| this program; if not, write to the Free Software Foundation, Inc., 59 |
| Temple Place - Suite 330, Boston, MA 02111-1307, USA. |
| |
| The full GNU General Public License is included in this distribution in the |
| file called LICENSE. |
| |
| Contact Information: |
| Intel Linux Wireless <ilw@linux.intel.com> |
| Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 |
| |
| Portions of this file are based on the sample_* files provided by Wireless |
| Extensions 0.26 package and copyright (c) 1997-2003 Jean Tourrilhes |
| <jt@hpl.hp.com> |
| |
| Portions of this file are based on the Host AP project, |
| Copyright (c) 2001-2002, SSH Communications Security Corp and Jouni Malinen |
| <j@w1.fi> |
| Copyright (c) 2002-2003, Jouni Malinen <j@w1.fi> |
| |
| Portions of ipw2100_mod_firmware_load, ipw2100_do_mod_firmware_load, and |
| ipw2100_fw_load are loosely based on drivers/sound/sound_firmware.c |
| available in the 2.4.25 kernel sources, and are copyright (c) Alan Cox |
| |
| ******************************************************************************/ |
| /* |
| |
| Initial driver on which this is based was developed by Janusz Gorycki, |
| Maciej Urbaniak, and Maciej Sosnowski. |
| |
| Promiscuous mode support added by Jacek Wysoczynski and Maciej Urbaniak. |
| |
| Theory of Operation |
| |
| Tx - Commands and Data |
| |
| Firmware and host share a circular queue of Transmit Buffer Descriptors (TBDs) |
| Each TBD contains a pointer to the physical (dma_addr_t) address of data being |
| sent to the firmware as well as the length of the data. |
| |
| The host writes to the TBD queue at the WRITE index. The WRITE index points |
| to the _next_ packet to be written and is advanced when after the TBD has been |
| filled. |
| |
| The firmware pulls from the TBD queue at the READ index. The READ index points |
| to the currently being read entry, and is advanced once the firmware is |
| done with a packet. |
| |
| When data is sent to the firmware, the first TBD is used to indicate to the |
| firmware if a Command or Data is being sent. If it is Command, all of the |
| command information is contained within the physical address referred to by the |
| TBD. If it is Data, the first TBD indicates the type of data packet, number |
| of fragments, etc. The next TBD then referrs to the actual packet location. |
| |
| The Tx flow cycle is as follows: |
| |
| 1) ipw2100_tx() is called by kernel with SKB to transmit |
| 2) Packet is move from the tx_free_list and appended to the transmit pending |
| list (tx_pend_list) |
| 3) work is scheduled to move pending packets into the shared circular queue. |
| 4) when placing packet in the circular queue, the incoming SKB is DMA mapped |
| to a physical address. That address is entered into a TBD. Two TBDs are |
| filled out. The first indicating a data packet, the second referring to the |
| actual payload data. |
| 5) the packet is removed from tx_pend_list and placed on the end of the |
| firmware pending list (fw_pend_list) |
| 6) firmware is notified that the WRITE index has |
| 7) Once the firmware has processed the TBD, INTA is triggered. |
| 8) For each Tx interrupt received from the firmware, the READ index is checked |
| to see which TBDs are done being processed. |
| 9) For each TBD that has been processed, the ISR pulls the oldest packet |
| from the fw_pend_list. |
| 10)The packet structure contained in the fw_pend_list is then used |
| to unmap the DMA address and to free the SKB originally passed to the driver |
| from the kernel. |
| 11)The packet structure is placed onto the tx_free_list |
| |
| The above steps are the same for commands, only the msg_free_list/msg_pend_list |
| are used instead of tx_free_list/tx_pend_list |
| |
| ... |
| |
| Critical Sections / Locking : |
| |
| There are two locks utilized. The first is the low level lock (priv->low_lock) |
| that protects the following: |
| |
| - Access to the Tx/Rx queue lists via priv->low_lock. The lists are as follows: |
| |
| tx_free_list : Holds pre-allocated Tx buffers. |
| TAIL modified in __ipw2100_tx_process() |
| HEAD modified in ipw2100_tx() |
| |
| tx_pend_list : Holds used Tx buffers waiting to go into the TBD ring |
| TAIL modified ipw2100_tx() |
| HEAD modified by ipw2100_tx_send_data() |
| |
| msg_free_list : Holds pre-allocated Msg (Command) buffers |
| TAIL modified in __ipw2100_tx_process() |
| HEAD modified in ipw2100_hw_send_command() |
| |
| msg_pend_list : Holds used Msg buffers waiting to go into the TBD ring |
| TAIL modified in ipw2100_hw_send_command() |
| HEAD modified in ipw2100_tx_send_commands() |
| |
| The flow of data on the TX side is as follows: |
| |
| MSG_FREE_LIST + COMMAND => MSG_PEND_LIST => TBD => MSG_FREE_LIST |
| TX_FREE_LIST + DATA => TX_PEND_LIST => TBD => TX_FREE_LIST |
| |
| The methods that work on the TBD ring are protected via priv->low_lock. |
| |
| - The internal data state of the device itself |
| - Access to the firmware read/write indexes for the BD queues |
| and associated logic |
| |
| All external entry functions are locked with the priv->action_lock to ensure |
| that only one external action is invoked at a time. |
| |
| |
| */ |
| |
| #include <linux/compiler.h> |
| #include <linux/errno.h> |
| #include <linux/if_arp.h> |
| #include <linux/in6.h> |
| #include <linux/in.h> |
| #include <linux/ip.h> |
| #include <linux/kernel.h> |
| #include <linux/kmod.h> |
| #include <linux/module.h> |
| #include <linux/netdevice.h> |
| #include <linux/ethtool.h> |
| #include <linux/pci.h> |
| #include <linux/dma-mapping.h> |
| #include <linux/proc_fs.h> |
| #include <linux/skbuff.h> |
| #include <asm/uaccess.h> |
| #include <asm/io.h> |
| #include <linux/fs.h> |
| #include <linux/mm.h> |
| #include <linux/slab.h> |
| #include <linux/unistd.h> |
| #include <linux/stringify.h> |
| #include <linux/tcp.h> |
| #include <linux/types.h> |
| #include <linux/time.h> |
| #include <linux/firmware.h> |
| #include <linux/acpi.h> |
| #include <linux/ctype.h> |
| #include <linux/pm_qos_params.h> |
| |
| #include <net/lib80211.h> |
| |
| #include "ipw2100.h" |
| |
| #define IPW2100_VERSION "git-1.2.2" |
| |
| #define DRV_NAME "ipw2100" |
| #define DRV_VERSION IPW2100_VERSION |
| #define DRV_DESCRIPTION "Intel(R) PRO/Wireless 2100 Network Driver" |
| #define DRV_COPYRIGHT "Copyright(c) 2003-2006 Intel Corporation" |
| |
| static struct pm_qos_request_list ipw2100_pm_qos_req; |
| |
| /* Debugging stuff */ |
| #ifdef CONFIG_IPW2100_DEBUG |
| #define IPW2100_RX_DEBUG /* Reception debugging */ |
| #endif |
| |
| MODULE_DESCRIPTION(DRV_DESCRIPTION); |
| MODULE_VERSION(DRV_VERSION); |
| MODULE_AUTHOR(DRV_COPYRIGHT); |
| MODULE_LICENSE("GPL"); |
| |
| static int debug = 0; |
| static int network_mode = 0; |
| static int channel = 0; |
| static int associate = 0; |
| static int disable = 0; |
| #ifdef CONFIG_PM |
| static struct ipw2100_fw ipw2100_firmware; |
| #endif |
| |
| #include <linux/moduleparam.h> |
| module_param(debug, int, 0444); |
| module_param_named(mode, network_mode, int, 0444); |
| module_param(channel, int, 0444); |
| module_param(associate, int, 0444); |
| module_param(disable, int, 0444); |
| |
| MODULE_PARM_DESC(debug, "debug level"); |
| MODULE_PARM_DESC(mode, "network mode (0=BSS,1=IBSS,2=Monitor)"); |
| MODULE_PARM_DESC(channel, "channel"); |
| MODULE_PARM_DESC(associate, "auto associate when scanning (default off)"); |
| MODULE_PARM_DESC(disable, "manually disable the radio (default 0 [radio on])"); |
| |
| static u32 ipw2100_debug_level = IPW_DL_NONE; |
| |
| #ifdef CONFIG_IPW2100_DEBUG |
| #define IPW_DEBUG(level, message...) \ |
| do { \ |
| if (ipw2100_debug_level & (level)) { \ |
| printk(KERN_DEBUG "ipw2100: %c %s ", \ |
| in_interrupt() ? 'I' : 'U', __func__); \ |
| printk(message); \ |
| } \ |
| } while (0) |
| #else |
| #define IPW_DEBUG(level, message...) do {} while (0) |
| #endif /* CONFIG_IPW2100_DEBUG */ |
| |
| #ifdef CONFIG_IPW2100_DEBUG |
| static const char *command_types[] = { |
| "undefined", |
| "unused", /* HOST_ATTENTION */ |
| "HOST_COMPLETE", |
| "unused", /* SLEEP */ |
| "unused", /* HOST_POWER_DOWN */ |
| "unused", |
| "SYSTEM_CONFIG", |
| "unused", /* SET_IMR */ |
| "SSID", |
| "MANDATORY_BSSID", |
| "AUTHENTICATION_TYPE", |
| "ADAPTER_ADDRESS", |
| "PORT_TYPE", |
| "INTERNATIONAL_MODE", |
| "CHANNEL", |
| "RTS_THRESHOLD", |
| "FRAG_THRESHOLD", |
| "POWER_MODE", |
| "TX_RATES", |
| "BASIC_TX_RATES", |
| "WEP_KEY_INFO", |
| "unused", |
| "unused", |
| "unused", |
| "unused", |
| "WEP_KEY_INDEX", |
| "WEP_FLAGS", |
| "ADD_MULTICAST", |
| "CLEAR_ALL_MULTICAST", |
| "BEACON_INTERVAL", |
| "ATIM_WINDOW", |
| "CLEAR_STATISTICS", |
| "undefined", |
| "undefined", |
| "undefined", |
| "undefined", |
| "TX_POWER_INDEX", |
| "undefined", |
| "undefined", |
| "undefined", |
| "undefined", |
| "undefined", |
| "undefined", |
| "BROADCAST_SCAN", |
| "CARD_DISABLE", |
| "PREFERRED_BSSID", |
| "SET_SCAN_OPTIONS", |
| "SCAN_DWELL_TIME", |
| "SWEEP_TABLE", |
| "AP_OR_STATION_TABLE", |
| "GROUP_ORDINALS", |
| "SHORT_RETRY_LIMIT", |
| "LONG_RETRY_LIMIT", |
| "unused", /* SAVE_CALIBRATION */ |
| "unused", /* RESTORE_CALIBRATION */ |
| "undefined", |
| "undefined", |
| "undefined", |
| "HOST_PRE_POWER_DOWN", |
| "unused", /* HOST_INTERRUPT_COALESCING */ |
| "undefined", |
| "CARD_DISABLE_PHY_OFF", |
| "MSDU_TX_RATES" "undefined", |
| "undefined", |
| "SET_STATION_STAT_BITS", |
| "CLEAR_STATIONS_STAT_BITS", |
| "LEAP_ROGUE_MODE", |
| "SET_SECURITY_INFORMATION", |
| "DISASSOCIATION_BSSID", |
| "SET_WPA_ASS_IE" |
| }; |
| #endif |
| |
| #define WEXT_USECHANNELS 1 |
| |
| static const long ipw2100_frequencies[] = { |
| 2412, 2417, 2422, 2427, |
| 2432, 2437, 2442, 2447, |
| 2452, 2457, 2462, 2467, |
| 2472, 2484 |
| }; |
| |
| #define FREQ_COUNT ARRAY_SIZE(ipw2100_frequencies) |
| |
| static const long ipw2100_rates_11b[] = { |
| 1000000, |
| 2000000, |
| 5500000, |
| 11000000 |
| }; |
| |
| static struct ieee80211_rate ipw2100_bg_rates[] = { |
| { .bitrate = 10 }, |
| { .bitrate = 20, .flags = IEEE80211_RATE_SHORT_PREAMBLE }, |
| { .bitrate = 55, .flags = IEEE80211_RATE_SHORT_PREAMBLE }, |
| { .bitrate = 110, .flags = IEEE80211_RATE_SHORT_PREAMBLE }, |
| }; |
| |
| #define RATE_COUNT ARRAY_SIZE(ipw2100_rates_11b) |
| |
| /* Pre-decl until we get the code solid and then we can clean it up */ |
| static void ipw2100_tx_send_commands(struct ipw2100_priv *priv); |
| static void ipw2100_tx_send_data(struct ipw2100_priv *priv); |
| static int ipw2100_adapter_setup(struct ipw2100_priv *priv); |
| |
| static void ipw2100_queues_initialize(struct ipw2100_priv *priv); |
| static void ipw2100_queues_free(struct ipw2100_priv *priv); |
| static int ipw2100_queues_allocate(struct ipw2100_priv *priv); |
| |
| static int ipw2100_fw_download(struct ipw2100_priv *priv, |
| struct ipw2100_fw *fw); |
| static int ipw2100_get_firmware(struct ipw2100_priv *priv, |
| struct ipw2100_fw *fw); |
| static int ipw2100_get_fwversion(struct ipw2100_priv *priv, char *buf, |
| size_t max); |
| static int ipw2100_get_ucodeversion(struct ipw2100_priv *priv, char *buf, |
| size_t max); |
| static void ipw2100_release_firmware(struct ipw2100_priv *priv, |
| struct ipw2100_fw *fw); |
| static int ipw2100_ucode_download(struct ipw2100_priv *priv, |
| struct ipw2100_fw *fw); |
| static void ipw2100_wx_event_work(struct work_struct *work); |
| static struct iw_statistics *ipw2100_wx_wireless_stats(struct net_device *dev); |
| static struct iw_handler_def ipw2100_wx_handler_def; |
| |
| static inline void read_register(struct net_device *dev, u32 reg, u32 * val) |
| { |
| *val = readl((void __iomem *)(dev->base_addr + reg)); |
| IPW_DEBUG_IO("r: 0x%08X => 0x%08X\n", reg, *val); |
| } |
| |
| static inline void write_register(struct net_device *dev, u32 reg, u32 val) |
| { |
| writel(val, (void __iomem *)(dev->base_addr + reg)); |
| IPW_DEBUG_IO("w: 0x%08X <= 0x%08X\n", reg, val); |
| } |
| |
| static inline void read_register_word(struct net_device *dev, u32 reg, |
| u16 * val) |
| { |
| *val = readw((void __iomem *)(dev->base_addr + reg)); |
| IPW_DEBUG_IO("r: 0x%08X => %04X\n", reg, *val); |
| } |
| |
| static inline void read_register_byte(struct net_device *dev, u32 reg, u8 * val) |
| { |
| *val = readb((void __iomem *)(dev->base_addr + reg)); |
| IPW_DEBUG_IO("r: 0x%08X => %02X\n", reg, *val); |
| } |
| |
| static inline void write_register_word(struct net_device *dev, u32 reg, u16 val) |
| { |
| writew(val, (void __iomem *)(dev->base_addr + reg)); |
| IPW_DEBUG_IO("w: 0x%08X <= %04X\n", reg, val); |
| } |
| |
| static inline void write_register_byte(struct net_device *dev, u32 reg, u8 val) |
| { |
| writeb(val, (void __iomem *)(dev->base_addr + reg)); |
| IPW_DEBUG_IO("w: 0x%08X =< %02X\n", reg, val); |
| } |
| |
| static inline void read_nic_dword(struct net_device *dev, u32 addr, u32 * val) |
| { |
| write_register(dev, IPW_REG_INDIRECT_ACCESS_ADDRESS, |
| addr & IPW_REG_INDIRECT_ADDR_MASK); |
| read_register(dev, IPW_REG_INDIRECT_ACCESS_DATA, val); |
| } |
| |
| static inline void write_nic_dword(struct net_device *dev, u32 addr, u32 val) |
| { |
| write_register(dev, IPW_REG_INDIRECT_ACCESS_ADDRESS, |
| addr & IPW_REG_INDIRECT_ADDR_MASK); |
| write_register(dev, IPW_REG_INDIRECT_ACCESS_DATA, val); |
| } |
| |
| static inline void read_nic_word(struct net_device *dev, u32 addr, u16 * val) |
| { |
| write_register(dev, IPW_REG_INDIRECT_ACCESS_ADDRESS, |
| addr & IPW_REG_INDIRECT_ADDR_MASK); |
| read_register_word(dev, IPW_REG_INDIRECT_ACCESS_DATA, val); |
| } |
| |
| static inline void write_nic_word(struct net_device *dev, u32 addr, u16 val) |
| { |
| write_register(dev, IPW_REG_INDIRECT_ACCESS_ADDRESS, |
| addr & IPW_REG_INDIRECT_ADDR_MASK); |
| write_register_word(dev, IPW_REG_INDIRECT_ACCESS_DATA, val); |
| } |
| |
| static inline void read_nic_byte(struct net_device *dev, u32 addr, u8 * val) |
| { |
| write_register(dev, IPW_REG_INDIRECT_ACCESS_ADDRESS, |
| addr & IPW_REG_INDIRECT_ADDR_MASK); |
| read_register_byte(dev, IPW_REG_INDIRECT_ACCESS_DATA, val); |
| } |
| |
| static inline void write_nic_byte(struct net_device *dev, u32 addr, u8 val) |
| { |
| write_register(dev, IPW_REG_INDIRECT_ACCESS_ADDRESS, |
| addr & IPW_REG_INDIRECT_ADDR_MASK); |
| write_register_byte(dev, IPW_REG_INDIRECT_ACCESS_DATA, val); |
| } |
| |
| static inline void write_nic_auto_inc_address(struct net_device *dev, u32 addr) |
| { |
| write_register(dev, IPW_REG_AUTOINCREMENT_ADDRESS, |
| addr & IPW_REG_INDIRECT_ADDR_MASK); |
| } |
| |
| static inline void write_nic_dword_auto_inc(struct net_device *dev, u32 val) |
| { |
| write_register(dev, IPW_REG_AUTOINCREMENT_DATA, val); |
| } |
| |
| static void write_nic_memory(struct net_device *dev, u32 addr, u32 len, |
| const u8 * buf) |
| { |
| u32 aligned_addr; |
| u32 aligned_len; |
| u32 dif_len; |
| u32 i; |
| |
| /* read first nibble byte by byte */ |
| aligned_addr = addr & (~0x3); |
| dif_len = addr - aligned_addr; |
| if (dif_len) { |
| /* Start reading at aligned_addr + dif_len */ |
| write_register(dev, IPW_REG_INDIRECT_ACCESS_ADDRESS, |
| aligned_addr); |
| for (i = dif_len; i < 4; i++, buf++) |
| write_register_byte(dev, |
| IPW_REG_INDIRECT_ACCESS_DATA + i, |
| *buf); |
| |
| len -= dif_len; |
| aligned_addr += 4; |
| } |
| |
| /* read DWs through autoincrement registers */ |
| write_register(dev, IPW_REG_AUTOINCREMENT_ADDRESS, aligned_addr); |
| aligned_len = len & (~0x3); |
| for (i = 0; i < aligned_len; i += 4, buf += 4, aligned_addr += 4) |
| write_register(dev, IPW_REG_AUTOINCREMENT_DATA, *(u32 *) buf); |
| |
| /* copy the last nibble */ |
| dif_len = len - aligned_len; |
| write_register(dev, IPW_REG_INDIRECT_ACCESS_ADDRESS, aligned_addr); |
| for (i = 0; i < dif_len; i++, buf++) |
| write_register_byte(dev, IPW_REG_INDIRECT_ACCESS_DATA + i, |
| *buf); |
| } |
| |
| static void read_nic_memory(struct net_device *dev, u32 addr, u32 len, |
| u8 * buf) |
| { |
| u32 aligned_addr; |
| u32 aligned_len; |
| u32 dif_len; |
| u32 i; |
| |
| /* read first nibble byte by byte */ |
| aligned_addr = addr & (~0x3); |
| dif_len = addr - aligned_addr; |
| if (dif_len) { |
| /* Start reading at aligned_addr + dif_len */ |
| write_register(dev, IPW_REG_INDIRECT_ACCESS_ADDRESS, |
| aligned_addr); |
| for (i = dif_len; i < 4; i++, buf++) |
| read_register_byte(dev, |
| IPW_REG_INDIRECT_ACCESS_DATA + i, |
| buf); |
| |
| len -= dif_len; |
| aligned_addr += 4; |
| } |
| |
| /* read DWs through autoincrement registers */ |
| write_register(dev, IPW_REG_AUTOINCREMENT_ADDRESS, aligned_addr); |
| aligned_len = len & (~0x3); |
| for (i = 0; i < aligned_len; i += 4, buf += 4, aligned_addr += 4) |
| read_register(dev, IPW_REG_AUTOINCREMENT_DATA, (u32 *) buf); |
| |
| /* copy the last nibble */ |
| dif_len = len - aligned_len; |
| write_register(dev, IPW_REG_INDIRECT_ACCESS_ADDRESS, aligned_addr); |
| for (i = 0; i < dif_len; i++, buf++) |
| read_register_byte(dev, IPW_REG_INDIRECT_ACCESS_DATA + i, buf); |
| } |
| |
| static inline int ipw2100_hw_is_adapter_in_system(struct net_device *dev) |
| { |
| return (dev->base_addr && |
| (readl |
| ((void __iomem *)(dev->base_addr + |
| IPW_REG_DOA_DEBUG_AREA_START)) |
| == IPW_DATA_DOA_DEBUG_VALUE)); |
| } |
| |
| static int ipw2100_get_ordinal(struct ipw2100_priv *priv, u32 ord, |
| void *val, u32 * len) |
| { |
| struct ipw2100_ordinals *ordinals = &priv->ordinals; |
| u32 addr; |
| u32 field_info; |
| u16 field_len; |
| u16 field_count; |
| u32 total_length; |
| |
| if (ordinals->table1_addr == 0) { |
| printk(KERN_WARNING DRV_NAME ": attempt to use fw ordinals " |
| "before they have been loaded.\n"); |
| return -EINVAL; |
| } |
| |
| if (IS_ORDINAL_TABLE_ONE(ordinals, ord)) { |
| if (*len < IPW_ORD_TAB_1_ENTRY_SIZE) { |
| *len = IPW_ORD_TAB_1_ENTRY_SIZE; |
| |
| printk(KERN_WARNING DRV_NAME |
| ": ordinal buffer length too small, need %zd\n", |
| IPW_ORD_TAB_1_ENTRY_SIZE); |
| |
| return -EINVAL; |
| } |
| |
| read_nic_dword(priv->net_dev, |
| ordinals->table1_addr + (ord << 2), &addr); |
| read_nic_dword(priv->net_dev, addr, val); |
| |
| *len = IPW_ORD_TAB_1_ENTRY_SIZE; |
| |
| return 0; |
| } |
| |
| if (IS_ORDINAL_TABLE_TWO(ordinals, ord)) { |
| |
| ord -= IPW_START_ORD_TAB_2; |
| |
| /* get the address of statistic */ |
| read_nic_dword(priv->net_dev, |
| ordinals->table2_addr + (ord << 3), &addr); |
| |
| /* get the second DW of statistics ; |
| * two 16-bit words - first is length, second is count */ |
| read_nic_dword(priv->net_dev, |
| ordinals->table2_addr + (ord << 3) + sizeof(u32), |
| &field_info); |
| |
| /* get each entry length */ |
| field_len = *((u16 *) & field_info); |
| |
| /* get number of entries */ |
| field_count = *(((u16 *) & field_info) + 1); |
| |
| /* abort if no enough memory */ |
| total_length = field_len * field_count; |
| if (total_length > *len) { |
| *len = total_length; |
| return -EINVAL; |
| } |
| |
| *len = total_length; |
| if (!total_length) |
| return 0; |
| |
| /* read the ordinal data from the SRAM */ |
| read_nic_memory(priv->net_dev, addr, total_length, val); |
| |
| return 0; |
| } |
| |
| printk(KERN_WARNING DRV_NAME ": ordinal %d neither in table 1 nor " |
| "in table 2\n", ord); |
| |
| return -EINVAL; |
| } |
| |
| static int ipw2100_set_ordinal(struct ipw2100_priv *priv, u32 ord, u32 * val, |
| u32 * len) |
| { |
| struct ipw2100_ordinals *ordinals = &priv->ordinals; |
| u32 addr; |
| |
| if (IS_ORDINAL_TABLE_ONE(ordinals, ord)) { |
| if (*len != IPW_ORD_TAB_1_ENTRY_SIZE) { |
| *len = IPW_ORD_TAB_1_ENTRY_SIZE; |
| IPW_DEBUG_INFO("wrong size\n"); |
| return -EINVAL; |
| } |
| |
| read_nic_dword(priv->net_dev, |
| ordinals->table1_addr + (ord << 2), &addr); |
| |
| write_nic_dword(priv->net_dev, addr, *val); |
| |
| *len = IPW_ORD_TAB_1_ENTRY_SIZE; |
| |
| return 0; |
| } |
| |
| IPW_DEBUG_INFO("wrong table\n"); |
| if (IS_ORDINAL_TABLE_TWO(ordinals, ord)) |
| return -EINVAL; |
| |
| return -EINVAL; |
| } |
| |
| static char *snprint_line(char *buf, size_t count, |
| const u8 * data, u32 len, u32 ofs) |
| { |
| int out, i, j, l; |
| char c; |
| |
| out = snprintf(buf, count, "%08X", ofs); |
| |
| for (l = 0, i = 0; i < 2; i++) { |
| out += snprintf(buf + out, count - out, " "); |
| for (j = 0; j < 8 && l < len; j++, l++) |
| out += snprintf(buf + out, count - out, "%02X ", |
| data[(i * 8 + j)]); |
| for (; j < 8; j++) |
| out += snprintf(buf + out, count - out, " "); |
| } |
| |
| out += snprintf(buf + out, count - out, " "); |
| for (l = 0, i = 0; i < 2; i++) { |
| out += snprintf(buf + out, count - out, " "); |
| for (j = 0; j < 8 && l < len; j++, l++) { |
| c = data[(i * 8 + j)]; |
| if (!isascii(c) || !isprint(c)) |
| c = '.'; |
| |
| out += snprintf(buf + out, count - out, "%c", c); |
| } |
| |
| for (; j < 8; j++) |
| out += snprintf(buf + out, count - out, " "); |
| } |
| |
| return buf; |
| } |
| |
| static void printk_buf(int level, const u8 * data, u32 len) |
| { |
| char line[81]; |
| u32 ofs = 0; |
| if (!(ipw2100_debug_level & level)) |
| return; |
| |
| while (len) { |
| printk(KERN_DEBUG "%s\n", |
| snprint_line(line, sizeof(line), &data[ofs], |
| min(len, 16U), ofs)); |
| ofs += 16; |
| len -= min(len, 16U); |
| } |
| } |
| |
| #define MAX_RESET_BACKOFF 10 |
| |
| static void schedule_reset(struct ipw2100_priv *priv) |
| { |
| unsigned long now = get_seconds(); |
| |
| /* If we haven't received a reset request within the backoff period, |
| * then we can reset the backoff interval so this reset occurs |
| * immediately */ |
| if (priv->reset_backoff && |
| (now - priv->last_reset > priv->reset_backoff)) |
| priv->reset_backoff = 0; |
| |
| priv->last_reset = get_seconds(); |
| |
| if (!(priv->status & STATUS_RESET_PENDING)) { |
| IPW_DEBUG_INFO("%s: Scheduling firmware restart (%ds).\n", |
| priv->net_dev->name, priv->reset_backoff); |
| netif_carrier_off(priv->net_dev); |
| netif_stop_queue(priv->net_dev); |
| priv->status |= STATUS_RESET_PENDING; |
| if (priv->reset_backoff) |
| schedule_delayed_work(&priv->reset_work, |
| priv->reset_backoff * HZ); |
| else |
| schedule_delayed_work(&priv->reset_work, 0); |
| |
| if (priv->reset_backoff < MAX_RESET_BACKOFF) |
| priv->reset_backoff++; |
| |
| wake_up_interruptible(&priv->wait_command_queue); |
| } else |
| IPW_DEBUG_INFO("%s: Firmware restart already in progress.\n", |
| priv->net_dev->name); |
| |
| } |
| |
| #define HOST_COMPLETE_TIMEOUT (2 * HZ) |
| static int ipw2100_hw_send_command(struct ipw2100_priv *priv, |
| struct host_command *cmd) |
| { |
| struct list_head *element; |
| struct ipw2100_tx_packet *packet; |
| unsigned long flags; |
| int err = 0; |
| |
| IPW_DEBUG_HC("Sending %s command (#%d), %d bytes\n", |
| command_types[cmd->host_command], cmd->host_command, |
| cmd->host_command_length); |
| printk_buf(IPW_DL_HC, (u8 *) cmd->host_command_parameters, |
| cmd->host_command_length); |
| |
| spin_lock_irqsave(&priv->low_lock, flags); |
| |
| if (priv->fatal_error) { |
| IPW_DEBUG_INFO |
| ("Attempt to send command while hardware in fatal error condition.\n"); |
| err = -EIO; |
| goto fail_unlock; |
| } |
| |
| if (!(priv->status & STATUS_RUNNING)) { |
| IPW_DEBUG_INFO |
| ("Attempt to send command while hardware is not running.\n"); |
| err = -EIO; |
| goto fail_unlock; |
| } |
| |
| if (priv->status & STATUS_CMD_ACTIVE) { |
| IPW_DEBUG_INFO |
| ("Attempt to send command while another command is pending.\n"); |
| err = -EBUSY; |
| goto fail_unlock; |
| } |
| |
| if (list_empty(&priv->msg_free_list)) { |
| IPW_DEBUG_INFO("no available msg buffers\n"); |
| goto fail_unlock; |
| } |
| |
| priv->status |= STATUS_CMD_ACTIVE; |
| priv->messages_sent++; |
| |
| element = priv->msg_free_list.next; |
| |
| packet = list_entry(element, struct ipw2100_tx_packet, list); |
| packet->jiffy_start = jiffies; |
| |
| /* initialize the firmware command packet */ |
| packet->info.c_struct.cmd->host_command_reg = cmd->host_command; |
| packet->info.c_struct.cmd->host_command_reg1 = cmd->host_command1; |
| packet->info.c_struct.cmd->host_command_len_reg = |
| cmd->host_command_length; |
| packet->info.c_struct.cmd->sequence = cmd->host_command_sequence; |
| |
| memcpy(packet->info.c_struct.cmd->host_command_params_reg, |
| cmd->host_command_parameters, |
| sizeof(packet->info.c_struct.cmd->host_command_params_reg)); |
| |
| list_del(element); |
| DEC_STAT(&priv->msg_free_stat); |
| |
| list_add_tail(element, &priv->msg_pend_list); |
| INC_STAT(&priv->msg_pend_stat); |
| |
| ipw2100_tx_send_commands(priv); |
| ipw2100_tx_send_data(priv); |
| |
| spin_unlock_irqrestore(&priv->low_lock, flags); |
| |
| /* |
| * We must wait for this command to complete before another |
| * command can be sent... but if we wait more than 3 seconds |
| * then there is a problem. |
| */ |
| |
| err = |
| wait_event_interruptible_timeout(priv->wait_command_queue, |
| !(priv-> |
| status & STATUS_CMD_ACTIVE), |
| HOST_COMPLETE_TIMEOUT); |
| |
| if (err == 0) { |
| IPW_DEBUG_INFO("Command completion failed out after %dms.\n", |
| 1000 * (HOST_COMPLETE_TIMEOUT / HZ)); |
| priv->fatal_error = IPW2100_ERR_MSG_TIMEOUT; |
| priv->status &= ~STATUS_CMD_ACTIVE; |
| schedule_reset(priv); |
| return -EIO; |
| } |
| |
| if (priv->fatal_error) { |
| printk(KERN_WARNING DRV_NAME ": %s: firmware fatal error\n", |
| priv->net_dev->name); |
| return -EIO; |
| } |
| |
| /* !!!!! HACK TEST !!!!! |
| * When lots of debug trace statements are enabled, the driver |
| * doesn't seem to have as many firmware restart cycles... |
| * |
| * As a test, we're sticking in a 1/100s delay here */ |
| schedule_timeout_uninterruptible(msecs_to_jiffies(10)); |
| |
| return 0; |
| |
| fail_unlock: |
| spin_unlock_irqrestore(&priv->low_lock, flags); |
| |
| return err; |
| } |
| |
| /* |
| * Verify the values and data access of the hardware |
| * No locks needed or used. No functions called. |
| */ |
| static int ipw2100_verify(struct ipw2100_priv *priv) |
| { |
| u32 data1, data2; |
| u32 address; |
| |
| u32 val1 = 0x76543210; |
| u32 val2 = 0xFEDCBA98; |
| |
| /* Domain 0 check - all values should be DOA_DEBUG */ |
| for (address = IPW_REG_DOA_DEBUG_AREA_START; |
| address < IPW_REG_DOA_DEBUG_AREA_END; address += sizeof(u32)) { |
| read_register(priv->net_dev, address, &data1); |
| if (data1 != IPW_DATA_DOA_DEBUG_VALUE) |
| return -EIO; |
| } |
| |
| /* Domain 1 check - use arbitrary read/write compare */ |
| for (address = 0; address < 5; address++) { |
| /* The memory area is not used now */ |
| write_register(priv->net_dev, IPW_REG_DOMAIN_1_OFFSET + 0x32, |
| val1); |
| write_register(priv->net_dev, IPW_REG_DOMAIN_1_OFFSET + 0x36, |
| val2); |
| read_register(priv->net_dev, IPW_REG_DOMAIN_1_OFFSET + 0x32, |
| &data1); |
| read_register(priv->net_dev, IPW_REG_DOMAIN_1_OFFSET + 0x36, |
| &data2); |
| if (val1 == data1 && val2 == data2) |
| return 0; |
| } |
| |
| return -EIO; |
| } |
| |
| /* |
| * |
| * Loop until the CARD_DISABLED bit is the same value as the |
| * supplied parameter |
| * |
| * TODO: See if it would be more efficient to do a wait/wake |
| * cycle and have the completion event trigger the wakeup |
| * |
| */ |
| #define IPW_CARD_DISABLE_COMPLETE_WAIT 100 // 100 milli |
| static int ipw2100_wait_for_card_state(struct ipw2100_priv *priv, int state) |
| { |
| int i; |
| u32 card_state; |
| u32 len = sizeof(card_state); |
| int err; |
| |
| for (i = 0; i <= IPW_CARD_DISABLE_COMPLETE_WAIT * 1000; i += 50) { |
| err = ipw2100_get_ordinal(priv, IPW_ORD_CARD_DISABLED, |
| &card_state, &len); |
| if (err) { |
| IPW_DEBUG_INFO("Query of CARD_DISABLED ordinal " |
| "failed.\n"); |
| return 0; |
| } |
| |
| /* We'll break out if either the HW state says it is |
| * in the state we want, or if HOST_COMPLETE command |
| * finishes */ |
| if ((card_state == state) || |
| ((priv->status & STATUS_ENABLED) ? |
| IPW_HW_STATE_ENABLED : IPW_HW_STATE_DISABLED) == state) { |
| if (state == IPW_HW_STATE_ENABLED) |
| priv->status |= STATUS_ENABLED; |
| else |
| priv->status &= ~STATUS_ENABLED; |
| |
| return 0; |
| } |
| |
| udelay(50); |
| } |
| |
| IPW_DEBUG_INFO("ipw2100_wait_for_card_state to %s state timed out\n", |
| state ? "DISABLED" : "ENABLED"); |
| return -EIO; |
| } |
| |
| /********************************************************************* |
| Procedure : sw_reset_and_clock |
| Purpose : Asserts s/w reset, asserts clock initialization |
| and waits for clock stabilization |
| ********************************************************************/ |
| static int sw_reset_and_clock(struct ipw2100_priv *priv) |
| { |
| int i; |
| u32 r; |
| |
| // assert s/w reset |
| write_register(priv->net_dev, IPW_REG_RESET_REG, |
| IPW_AUX_HOST_RESET_REG_SW_RESET); |
| |
| // wait for clock stabilization |
| for (i = 0; i < 1000; i++) { |
| udelay(IPW_WAIT_RESET_ARC_COMPLETE_DELAY); |
| |
| // check clock ready bit |
| read_register(priv->net_dev, IPW_REG_RESET_REG, &r); |
| if (r & IPW_AUX_HOST_RESET_REG_PRINCETON_RESET) |
| break; |
| } |
| |
| if (i == 1000) |
| return -EIO; // TODO: better error value |
| |
| /* set "initialization complete" bit to move adapter to |
| * D0 state */ |
| write_register(priv->net_dev, IPW_REG_GP_CNTRL, |
| IPW_AUX_HOST_GP_CNTRL_BIT_INIT_DONE); |
| |
| /* wait for clock stabilization */ |
| for (i = 0; i < 10000; i++) { |
| udelay(IPW_WAIT_CLOCK_STABILIZATION_DELAY * 4); |
| |
| /* check clock ready bit */ |
| read_register(priv->net_dev, IPW_REG_GP_CNTRL, &r); |
| if (r & IPW_AUX_HOST_GP_CNTRL_BIT_CLOCK_READY) |
| break; |
| } |
| |
| if (i == 10000) |
| return -EIO; /* TODO: better error value */ |
| |
| /* set D0 standby bit */ |
| read_register(priv->net_dev, IPW_REG_GP_CNTRL, &r); |
| write_register(priv->net_dev, IPW_REG_GP_CNTRL, |
| r | IPW_AUX_HOST_GP_CNTRL_BIT_HOST_ALLOWS_STANDBY); |
| |
| return 0; |
| } |
| |
| /********************************************************************* |
| Procedure : ipw2100_download_firmware |
| Purpose : Initiaze adapter after power on. |
| The sequence is: |
| 1. assert s/w reset first! |
| 2. awake clocks & wait for clock stabilization |
| 3. hold ARC (don't ask me why...) |
| 4. load Dino ucode and reset/clock init again |
| 5. zero-out shared mem |
| 6. download f/w |
| *******************************************************************/ |
| static int ipw2100_download_firmware(struct ipw2100_priv *priv) |
| { |
| u32 address; |
| int err; |
| |
| #ifndef CONFIG_PM |
| /* Fetch the firmware and microcode */ |
| struct ipw2100_fw ipw2100_firmware; |
| #endif |
| |
| if (priv->fatal_error) { |
| IPW_DEBUG_ERROR("%s: ipw2100_download_firmware called after " |
| "fatal error %d. Interface must be brought down.\n", |
| priv->net_dev->name, priv->fatal_error); |
| return -EINVAL; |
| } |
| #ifdef CONFIG_PM |
| if (!ipw2100_firmware.version) { |
| err = ipw2100_get_firmware(priv, &ipw2100_firmware); |
| if (err) { |
| IPW_DEBUG_ERROR("%s: ipw2100_get_firmware failed: %d\n", |
| priv->net_dev->name, err); |
| priv->fatal_error = IPW2100_ERR_FW_LOAD; |
| goto fail; |
| } |
| } |
| #else |
| err = ipw2100_get_firmware(priv, &ipw2100_firmware); |
| if (err) { |
| IPW_DEBUG_ERROR("%s: ipw2100_get_firmware failed: %d\n", |
| priv->net_dev->name, err); |
| priv->fatal_error = IPW2100_ERR_FW_LOAD; |
| goto fail; |
| } |
| #endif |
| priv->firmware_version = ipw2100_firmware.version; |
| |
| /* s/w reset and clock stabilization */ |
| err = sw_reset_and_clock(priv); |
| if (err) { |
| IPW_DEBUG_ERROR("%s: sw_reset_and_clock failed: %d\n", |
| priv->net_dev->name, err); |
| goto fail; |
| } |
| |
| err = ipw2100_verify(priv); |
| if (err) { |
| IPW_DEBUG_ERROR("%s: ipw2100_verify failed: %d\n", |
| priv->net_dev->name, err); |
| goto fail; |
| } |
| |
| /* Hold ARC */ |
| write_nic_dword(priv->net_dev, |
| IPW_INTERNAL_REGISTER_HALT_AND_RESET, 0x80000000); |
| |
| /* allow ARC to run */ |
| write_register(priv->net_dev, IPW_REG_RESET_REG, 0); |
| |
| /* load microcode */ |
| err = ipw2100_ucode_download(priv, &ipw2100_firmware); |
| if (err) { |
| printk(KERN_ERR DRV_NAME ": %s: Error loading microcode: %d\n", |
| priv->net_dev->name, err); |
| goto fail; |
| } |
| |
| /* release ARC */ |
| write_nic_dword(priv->net_dev, |
| IPW_INTERNAL_REGISTER_HALT_AND_RESET, 0x00000000); |
| |
| /* s/w reset and clock stabilization (again!!!) */ |
| err = sw_reset_and_clock(priv); |
| if (err) { |
| printk(KERN_ERR DRV_NAME |
| ": %s: sw_reset_and_clock failed: %d\n", |
| priv->net_dev->name, err); |
| goto fail; |
| } |
| |
| /* load f/w */ |
| err = ipw2100_fw_download(priv, &ipw2100_firmware); |
| if (err) { |
| IPW_DEBUG_ERROR("%s: Error loading firmware: %d\n", |
| priv->net_dev->name, err); |
| goto fail; |
| } |
| #ifndef CONFIG_PM |
| /* |
| * When the .resume method of the driver is called, the other |
| * part of the system, i.e. the ide driver could still stay in |
| * the suspend stage. This prevents us from loading the firmware |
| * from the disk. --YZ |
| */ |
| |
| /* free any storage allocated for firmware image */ |
| ipw2100_release_firmware(priv, &ipw2100_firmware); |
| #endif |
| |
| /* zero out Domain 1 area indirectly (Si requirement) */ |
| for (address = IPW_HOST_FW_SHARED_AREA0; |
| address < IPW_HOST_FW_SHARED_AREA0_END; address += 4) |
| write_nic_dword(priv->net_dev, address, 0); |
| for (address = IPW_HOST_FW_SHARED_AREA1; |
| address < IPW_HOST_FW_SHARED_AREA1_END; address += 4) |
| write_nic_dword(priv->net_dev, address, 0); |
| for (address = IPW_HOST_FW_SHARED_AREA2; |
| address < IPW_HOST_FW_SHARED_AREA2_END; address += 4) |
| write_nic_dword(priv->net_dev, address, 0); |
| for (address = IPW_HOST_FW_SHARED_AREA3; |
| address < IPW_HOST_FW_SHARED_AREA3_END; address += 4) |
| write_nic_dword(priv->net_dev, address, 0); |
| for (address = IPW_HOST_FW_INTERRUPT_AREA; |
| address < IPW_HOST_FW_INTERRUPT_AREA_END; address += 4) |
| write_nic_dword(priv->net_dev, address, 0); |
| |
| return 0; |
| |
| fail: |
| ipw2100_release_firmware(priv, &ipw2100_firmware); |
| return err; |
| } |
| |
| static inline void ipw2100_enable_interrupts(struct ipw2100_priv *priv) |
| { |
| if (priv->status & STATUS_INT_ENABLED) |
| return; |
| priv->status |= STATUS_INT_ENABLED; |
| write_register(priv->net_dev, IPW_REG_INTA_MASK, IPW_INTERRUPT_MASK); |
| } |
| |
| static inline void ipw2100_disable_interrupts(struct ipw2100_priv *priv) |
| { |
| if (!(priv->status & STATUS_INT_ENABLED)) |
| return; |
| priv->status &= ~STATUS_INT_ENABLED; |
| write_register(priv->net_dev, IPW_REG_INTA_MASK, 0x0); |
| } |
| |
| static void ipw2100_initialize_ordinals(struct ipw2100_priv *priv) |
| { |
| struct ipw2100_ordinals *ord = &priv->ordinals; |
| |
| IPW_DEBUG_INFO("enter\n"); |
| |
| read_register(priv->net_dev, IPW_MEM_HOST_SHARED_ORDINALS_TABLE_1, |
| &ord->table1_addr); |
| |
| read_register(priv->net_dev, IPW_MEM_HOST_SHARED_ORDINALS_TABLE_2, |
| &ord->table2_addr); |
| |
| read_nic_dword(priv->net_dev, ord->table1_addr, &ord->table1_size); |
| read_nic_dword(priv->net_dev, ord->table2_addr, &ord->table2_size); |
| |
| ord->table2_size &= 0x0000FFFF; |
| |
| IPW_DEBUG_INFO("table 1 size: %d\n", ord->table1_size); |
| IPW_DEBUG_INFO("table 2 size: %d\n", ord->table2_size); |
| IPW_DEBUG_INFO("exit\n"); |
| } |
| |
| static inline void ipw2100_hw_set_gpio(struct ipw2100_priv *priv) |
| { |
| u32 reg = 0; |
| /* |
| * Set GPIO 3 writable by FW; GPIO 1 writable |
| * by driver and enable clock |
| */ |
| reg = (IPW_BIT_GPIO_GPIO3_MASK | IPW_BIT_GPIO_GPIO1_ENABLE | |
| IPW_BIT_GPIO_LED_OFF); |
| write_register(priv->net_dev, IPW_REG_GPIO, reg); |
| } |
| |
| static int rf_kill_active(struct ipw2100_priv *priv) |
| { |
| #define MAX_RF_KILL_CHECKS 5 |
| #define RF_KILL_CHECK_DELAY 40 |
| |
| unsigned short value = 0; |
| u32 reg = 0; |
| int i; |
| |
| if (!(priv->hw_features & HW_FEATURE_RFKILL)) { |
| wiphy_rfkill_set_hw_state(priv->ieee->wdev.wiphy, false); |
| priv->status &= ~STATUS_RF_KILL_HW; |
| return 0; |
| } |
| |
| for (i = 0; i < MAX_RF_KILL_CHECKS; i++) { |
| udelay(RF_KILL_CHECK_DELAY); |
| read_register(priv->net_dev, IPW_REG_GPIO, ®); |
| value = (value << 1) | ((reg & IPW_BIT_GPIO_RF_KILL) ? 0 : 1); |
| } |
| |
| if (value == 0) { |
| wiphy_rfkill_set_hw_state(priv->ieee->wdev.wiphy, true); |
| priv->status |= STATUS_RF_KILL_HW; |
| } else { |
| wiphy_rfkill_set_hw_state(priv->ieee->wdev.wiphy, false); |
| priv->status &= ~STATUS_RF_KILL_HW; |
| } |
| |
| return (value == 0); |
| } |
| |
| static int ipw2100_get_hw_features(struct ipw2100_priv *priv) |
| { |
| u32 addr, len; |
| u32 val; |
| |
| /* |
| * EEPROM_SRAM_DB_START_ADDRESS using ordinal in ordinal table 1 |
| */ |
| len = sizeof(addr); |
| if (ipw2100_get_ordinal |
| (priv, IPW_ORD_EEPROM_SRAM_DB_BLOCK_START_ADDRESS, &addr, &len)) { |
| IPW_DEBUG_INFO("failed querying ordinals at line %d\n", |
| __LINE__); |
| return -EIO; |
| } |
| |
| IPW_DEBUG_INFO("EEPROM address: %08X\n", addr); |
| |
| /* |
| * EEPROM version is the byte at offset 0xfd in firmware |
| * We read 4 bytes, then shift out the byte we actually want */ |
| read_nic_dword(priv->net_dev, addr + 0xFC, &val); |
| priv->eeprom_version = (val >> 24) & 0xFF; |
| IPW_DEBUG_INFO("EEPROM version: %d\n", priv->eeprom_version); |
| |
| /* |
| * HW RF Kill enable is bit 0 in byte at offset 0x21 in firmware |
| * |
| * notice that the EEPROM bit is reverse polarity, i.e. |
| * bit = 0 signifies HW RF kill switch is supported |
| * bit = 1 signifies HW RF kill switch is NOT supported |
| */ |
| read_nic_dword(priv->net_dev, addr + 0x20, &val); |
| if (!((val >> 24) & 0x01)) |
| priv->hw_features |= HW_FEATURE_RFKILL; |
| |
| IPW_DEBUG_INFO("HW RF Kill: %ssupported.\n", |
| (priv->hw_features & HW_FEATURE_RFKILL) ? "" : "not "); |
| |
| return 0; |
| } |
| |
| /* |
| * Start firmware execution after power on and intialization |
| * The sequence is: |
| * 1. Release ARC |
| * 2. Wait for f/w initialization completes; |
| */ |
| static int ipw2100_start_adapter(struct ipw2100_priv *priv) |
| { |
| int i; |
| u32 inta, inta_mask, gpio; |
| |
| IPW_DEBUG_INFO("enter\n"); |
| |
| if (priv->status & STATUS_RUNNING) |
| return 0; |
| |
| /* |
| * Initialize the hw - drive adapter to DO state by setting |
| * init_done bit. Wait for clk_ready bit and Download |
| * fw & dino ucode |
| */ |
| if (ipw2100_download_firmware(priv)) { |
| printk(KERN_ERR DRV_NAME |
| ": %s: Failed to power on the adapter.\n", |
| priv->net_dev->name); |
| return -EIO; |
| } |
| |
| /* Clear the Tx, Rx and Msg queues and the r/w indexes |
| * in the firmware RBD and TBD ring queue */ |
| ipw2100_queues_initialize(priv); |
| |
| ipw2100_hw_set_gpio(priv); |
| |
| /* TODO -- Look at disabling interrupts here to make sure none |
| * get fired during FW initialization */ |
| |
| /* Release ARC - clear reset bit */ |
| write_register(priv->net_dev, IPW_REG_RESET_REG, 0); |
| |
| /* wait for f/w intialization complete */ |
| IPW_DEBUG_FW("Waiting for f/w initialization to complete...\n"); |
| i = 5000; |
| do { |
| schedule_timeout_uninterruptible(msecs_to_jiffies(40)); |
| /* Todo... wait for sync command ... */ |
| |
| read_register(priv->net_dev, IPW_REG_INTA, &inta); |
| |
| /* check "init done" bit */ |
| if (inta & IPW2100_INTA_FW_INIT_DONE) { |
| /* reset "init done" bit */ |
| write_register(priv->net_dev, IPW_REG_INTA, |
| IPW2100_INTA_FW_INIT_DONE); |
| break; |
| } |
| |
| /* check error conditions : we check these after the firmware |
| * check so that if there is an error, the interrupt handler |
| * will see it and the adapter will be reset */ |
| if (inta & |
| (IPW2100_INTA_FATAL_ERROR | IPW2100_INTA_PARITY_ERROR)) { |
| /* clear error conditions */ |
| write_register(priv->net_dev, IPW_REG_INTA, |
| IPW2100_INTA_FATAL_ERROR | |
| IPW2100_INTA_PARITY_ERROR); |
| } |
| } while (--i); |
| |
| /* Clear out any pending INTAs since we aren't supposed to have |
| * interrupts enabled at this point... */ |
| read_register(priv->net_dev, IPW_REG_INTA, &inta); |
| read_register(priv->net_dev, IPW_REG_INTA_MASK, &inta_mask); |
| inta &= IPW_INTERRUPT_MASK; |
| /* Clear out any pending interrupts */ |
| if (inta & inta_mask) |
| write_register(priv->net_dev, IPW_REG_INTA, inta); |
| |
| IPW_DEBUG_FW("f/w initialization complete: %s\n", |
| i ? "SUCCESS" : "FAILED"); |
| |
| if (!i) { |
| printk(KERN_WARNING DRV_NAME |
| ": %s: Firmware did not initialize.\n", |
| priv->net_dev->name); |
| return -EIO; |
| } |
| |
| /* allow firmware to write to GPIO1 & GPIO3 */ |
| read_register(priv->net_dev, IPW_REG_GPIO, &gpio); |
| |
| gpio |= (IPW_BIT_GPIO_GPIO1_MASK | IPW_BIT_GPIO_GPIO3_MASK); |
| |
| write_register(priv->net_dev, IPW_REG_GPIO, gpio); |
| |
| /* Ready to receive commands */ |
| priv->status |= STATUS_RUNNING; |
| |
| /* The adapter has been reset; we are not associated */ |
| priv->status &= ~(STATUS_ASSOCIATING | STATUS_ASSOCIATED); |
| |
| IPW_DEBUG_INFO("exit\n"); |
| |
| return 0; |
| } |
| |
| static inline void ipw2100_reset_fatalerror(struct ipw2100_priv *priv) |
| { |
| if (!priv->fatal_error) |
| return; |
| |
| priv->fatal_errors[priv->fatal_index++] = priv->fatal_error; |
| priv->fatal_index %= IPW2100_ERROR_QUEUE; |
| priv->fatal_error = 0; |
| } |
| |
| /* NOTE: Our interrupt is disabled when this method is called */ |
| static int ipw2100_power_cycle_adapter(struct ipw2100_priv *priv) |
| { |
| u32 reg; |
| int i; |
| |
| IPW_DEBUG_INFO("Power cycling the hardware.\n"); |
| |
| ipw2100_hw_set_gpio(priv); |
| |
| /* Step 1. Stop Master Assert */ |
| write_register(priv->net_dev, IPW_REG_RESET_REG, |
| IPW_AUX_HOST_RESET_REG_STOP_MASTER); |
| |
| /* Step 2. Wait for stop Master Assert |
| * (not more than 50us, otherwise ret error */ |
| i = 5; |
| do { |
| udelay(IPW_WAIT_RESET_MASTER_ASSERT_COMPLETE_DELAY); |
| read_register(priv->net_dev, IPW_REG_RESET_REG, ®); |
| |
| if (reg & IPW_AUX_HOST_RESET_REG_MASTER_DISABLED) |
| break; |
| } while (--i); |
| |
| priv->status &= ~STATUS_RESET_PENDING; |
| |
| if (!i) { |
| IPW_DEBUG_INFO |
| ("exit - waited too long for master assert stop\n"); |
| return -EIO; |
| } |
| |
| write_register(priv->net_dev, IPW_REG_RESET_REG, |
| IPW_AUX_HOST_RESET_REG_SW_RESET); |
| |
| /* Reset any fatal_error conditions */ |
| ipw2100_reset_fatalerror(priv); |
| |
| /* At this point, the adapter is now stopped and disabled */ |
| priv->status &= ~(STATUS_RUNNING | STATUS_ASSOCIATING | |
| STATUS_ASSOCIATED | STATUS_ENABLED); |
| |
| return 0; |
| } |
| |
| /* |
| * Send the CARD_DISABLE_PHY_OFF comamnd to the card to disable it |
| * |
| * After disabling, if the card was associated, a STATUS_ASSN_LOST will be sent. |
| * |
| * STATUS_CARD_DISABLE_NOTIFICATION will be sent regardless of |
| * if STATUS_ASSN_LOST is sent. |
| */ |
| static int ipw2100_hw_phy_off(struct ipw2100_priv *priv) |
| { |
| |
| #define HW_PHY_OFF_LOOP_DELAY (HZ / 5000) |
| |
| struct host_command cmd = { |
| .host_command = CARD_DISABLE_PHY_OFF, |
| .host_command_sequence = 0, |
| .host_command_length = 0, |
| }; |
| int err, i; |
| u32 val1, val2; |
| |
| IPW_DEBUG_HC("CARD_DISABLE_PHY_OFF\n"); |
| |
| /* Turn off the radio */ |
| err = ipw2100_hw_send_command(priv, &cmd); |
| if (err) |
| return err; |
| |
| for (i = 0; i < 2500; i++) { |
| read_nic_dword(priv->net_dev, IPW2100_CONTROL_REG, &val1); |
| read_nic_dword(priv->net_dev, IPW2100_COMMAND, &val2); |
| |
| if ((val1 & IPW2100_CONTROL_PHY_OFF) && |
| (val2 & IPW2100_COMMAND_PHY_OFF)) |
| return 0; |
| |
| schedule_timeout_uninterruptible(HW_PHY_OFF_LOOP_DELAY); |
| } |
| |
| return -EIO; |
| } |
| |
| static int ipw2100_enable_adapter(struct ipw2100_priv *priv) |
| { |
| struct host_command cmd = { |
| .host_command = HOST_COMPLETE, |
| .host_command_sequence = 0, |
| .host_command_length = 0 |
| }; |
| int err = 0; |
| |
| IPW_DEBUG_HC("HOST_COMPLETE\n"); |
| |
| if (priv->status & STATUS_ENABLED) |
| return 0; |
| |
| mutex_lock(&priv->adapter_mutex); |
| |
| if (rf_kill_active(priv)) { |
| IPW_DEBUG_HC("Command aborted due to RF kill active.\n"); |
| goto fail_up; |
| } |
| |
| err = ipw2100_hw_send_command(priv, &cmd); |
| if (err) { |
| IPW_DEBUG_INFO("Failed to send HOST_COMPLETE command\n"); |
| goto fail_up; |
| } |
| |
| err = ipw2100_wait_for_card_state(priv, IPW_HW_STATE_ENABLED); |
| if (err) { |
| IPW_DEBUG_INFO("%s: card not responding to init command.\n", |
| priv->net_dev->name); |
| goto fail_up; |
| } |
| |
| if (priv->stop_hang_check) { |
| priv->stop_hang_check = 0; |
| schedule_delayed_work(&priv->hang_check, HZ / 2); |
| } |
| |
| fail_up: |
| mutex_unlock(&priv->adapter_mutex); |
| return err; |
| } |
| |
| static int ipw2100_hw_stop_adapter(struct ipw2100_priv *priv) |
| { |
| #define HW_POWER_DOWN_DELAY (msecs_to_jiffies(100)) |
| |
| struct host_command cmd = { |
| .host_command = HOST_PRE_POWER_DOWN, |
| .host_command_sequence = 0, |
| .host_command_length = 0, |
| }; |
| int err, i; |
| u32 reg; |
| |
| if (!(priv->status & STATUS_RUNNING)) |
| return 0; |
| |
| priv->status |= STATUS_STOPPING; |
| |
| /* We can only shut down the card if the firmware is operational. So, |
| * if we haven't reset since a fatal_error, then we can not send the |
| * shutdown commands. */ |
| if (!priv->fatal_error) { |
| /* First, make sure the adapter is enabled so that the PHY_OFF |
| * command can shut it down */ |
| ipw2100_enable_adapter(priv); |
| |
| err = ipw2100_hw_phy_off(priv); |
| if (err) |
| printk(KERN_WARNING DRV_NAME |
| ": Error disabling radio %d\n", err); |
| |
| /* |
| * If in D0-standby mode going directly to D3 may cause a |
| * PCI bus violation. Therefore we must change out of the D0 |
| * state. |
| * |
| * Sending the PREPARE_FOR_POWER_DOWN will restrict the |
| * hardware from going into standby mode and will transition |
| * out of D0-standby if it is already in that state. |
| * |
| * STATUS_PREPARE_POWER_DOWN_COMPLETE will be sent by the |
| * driver upon completion. Once received, the driver can |
| * proceed to the D3 state. |
| * |
| * Prepare for power down command to fw. This command would |
| * take HW out of D0-standby and prepare it for D3 state. |
| * |
| * Currently FW does not support event notification for this |
| * event. Therefore, skip waiting for it. Just wait a fixed |
| * 100ms |
| */ |
| IPW_DEBUG_HC("HOST_PRE_POWER_DOWN\n"); |
| |
| err = ipw2100_hw_send_command(priv, &cmd); |
| if (err) |
| printk(KERN_WARNING DRV_NAME ": " |
| "%s: Power down command failed: Error %d\n", |
| priv->net_dev->name, err); |
| else |
| schedule_timeout_uninterruptible(HW_POWER_DOWN_DELAY); |
| } |
| |
| priv->status &= ~STATUS_ENABLED; |
| |
| /* |
| * Set GPIO 3 writable by FW; GPIO 1 writable |
| * by driver and enable clock |
| */ |
| ipw2100_hw_set_gpio(priv); |
| |
| /* |
| * Power down adapter. Sequence: |
| * 1. Stop master assert (RESET_REG[9]=1) |
| * 2. Wait for stop master (RESET_REG[8]==1) |
| * 3. S/w reset assert (RESET_REG[7] = 1) |
| */ |
| |
| /* Stop master assert */ |
| write_register(priv->net_dev, IPW_REG_RESET_REG, |
| IPW_AUX_HOST_RESET_REG_STOP_MASTER); |
| |
| /* wait stop master not more than 50 usec. |
| * Otherwise return error. */ |
| for (i = 5; i > 0; i--) { |
| udelay(10); |
| |
| /* Check master stop bit */ |
| read_register(priv->net_dev, IPW_REG_RESET_REG, ®); |
| |
| if (reg & IPW_AUX_HOST_RESET_REG_MASTER_DISABLED) |
| break; |
| } |
| |
| if (i == 0) |
| printk(KERN_WARNING DRV_NAME |
| ": %s: Could now power down adapter.\n", |
| priv->net_dev->name); |
| |
| /* assert s/w reset */ |
| write_register(priv->net_dev, IPW_REG_RESET_REG, |
| IPW_AUX_HOST_RESET_REG_SW_RESET); |
| |
| priv->status &= ~(STATUS_RUNNING | STATUS_STOPPING); |
| |
| return 0; |
| } |
| |
| static int ipw2100_disable_adapter(struct ipw2100_priv *priv) |
| { |
| struct host_command cmd = { |
| .host_command = CARD_DISABLE, |
| .host_command_sequence = 0, |
| .host_command_length = 0 |
| }; |
| int err = 0; |
| |
| IPW_DEBUG_HC("CARD_DISABLE\n"); |
| |
| if (!(priv->status & STATUS_ENABLED)) |
| return 0; |
| |
| /* Make sure we clear the associated state */ |
| priv->status &= ~(STATUS_ASSOCIATED | STATUS_ASSOCIATING); |
| |
| if (!priv->stop_hang_check) { |
| priv->stop_hang_check = 1; |
| cancel_delayed_work(&priv->hang_check); |
| } |
| |
| mutex_lock(&priv->adapter_mutex); |
| |
| err = ipw2100_hw_send_command(priv, &cmd); |
| if (err) { |
| printk(KERN_WARNING DRV_NAME |
| ": exit - failed to send CARD_DISABLE command\n"); |
| goto fail_up; |
| } |
| |
| err = ipw2100_wait_for_card_state(priv, IPW_HW_STATE_DISABLED); |
| if (err) { |
| printk(KERN_WARNING DRV_NAME |
| ": exit - card failed to change to DISABLED\n"); |
| goto fail_up; |
| } |
| |
| IPW_DEBUG_INFO("TODO: implement scan state machine\n"); |
| |
| fail_up: |
| mutex_unlock(&priv->adapter_mutex); |
| return err; |
| } |
| |
| static int ipw2100_set_scan_options(struct ipw2100_priv *priv) |
| { |
| struct host_command cmd = { |
| .host_command = SET_SCAN_OPTIONS, |
| .host_command_sequence = 0, |
| .host_command_length = 8 |
| }; |
| int err; |
| |
| IPW_DEBUG_INFO("enter\n"); |
| |
| IPW_DEBUG_SCAN("setting scan options\n"); |
| |
| cmd.host_command_parameters[0] = 0; |
| |
| if (!(priv->config & CFG_ASSOCIATE)) |
| cmd.host_command_parameters[0] |= IPW_SCAN_NOASSOCIATE; |
| if ((priv->ieee->sec.flags & SEC_ENABLED) && priv->ieee->sec.enabled) |
| cmd.host_command_parameters[0] |= IPW_SCAN_MIXED_CELL; |
| if (priv->config & CFG_PASSIVE_SCAN) |
| cmd.host_command_parameters[0] |= IPW_SCAN_PASSIVE; |
| |
| cmd.host_command_parameters[1] = priv->channel_mask; |
| |
| err = ipw2100_hw_send_command(priv, &cmd); |
| |
| IPW_DEBUG_HC("SET_SCAN_OPTIONS 0x%04X\n", |
| cmd.host_command_parameters[0]); |
| |
| return err; |
| } |
| |
| static int ipw2100_start_scan(struct ipw2100_priv *priv) |
| { |
| struct host_command cmd = { |
| .host_command = BROADCAST_SCAN, |
| .host_command_sequence = 0, |
| .host_command_length = 4 |
| }; |
| int err; |
| |
| IPW_DEBUG_HC("START_SCAN\n"); |
| |
| cmd.host_command_parameters[0] = 0; |
| |
| /* No scanning if in monitor mode */ |
| if (priv->ieee->iw_mode == IW_MODE_MONITOR) |
| return 1; |
| |
| if (priv->status & STATUS_SCANNING) { |
| IPW_DEBUG_SCAN("Scan requested while already in scan...\n"); |
| return 0; |
| } |
| |
| IPW_DEBUG_INFO("enter\n"); |
| |
| /* Not clearing here; doing so makes iwlist always return nothing... |
| * |
| * We should modify the table logic to use aging tables vs. clearing |
| * the table on each scan start. |
| */ |
| IPW_DEBUG_SCAN("starting scan\n"); |
| |
| priv->status |= STATUS_SCANNING; |
| err = ipw2100_hw_send_command(priv, &cmd); |
| if (err) |
| priv->status &= ~STATUS_SCANNING; |
| |
| IPW_DEBUG_INFO("exit\n"); |
| |
| return err; |
| } |
| |
| static const struct libipw_geo ipw_geos[] = { |
| { /* Restricted */ |
| "---", |
| .bg_channels = 14, |
| .bg = {{2412, 1}, {2417, 2}, {2422, 3}, |
| {2427, 4}, {2432, 5}, {2437, 6}, |
| {2442, 7}, {2447, 8}, {2452, 9}, |
| {2457, 10}, {2462, 11}, {2467, 12}, |
| {2472, 13}, {2484, 14}}, |
| }, |
| }; |
| |
| static int ipw2100_up(struct ipw2100_priv *priv, int deferred) |
| { |
| unsigned long flags; |
| int rc = 0; |
| u32 lock; |
| u32 ord_len = sizeof(lock); |
| |
| /* Age scan list entries found before suspend */ |
| if (priv->suspend_time) { |
| libipw_networks_age(priv->ieee, priv->suspend_time); |
| priv->suspend_time = 0; |
| } |
| |
| /* Quiet if manually disabled. */ |
| if (priv->status & STATUS_RF_KILL_SW) { |
| IPW_DEBUG_INFO("%s: Radio is disabled by Manual Disable " |
| "switch\n", priv->net_dev->name); |
| return 0; |
| } |
| |
| /* the ipw2100 hardware really doesn't want power management delays |
| * longer than 175usec |
| */ |
| pm_qos_update_request(&ipw2100_pm_qos_req, 175); |
| |
| /* If the interrupt is enabled, turn it off... */ |
| spin_lock_irqsave(&priv->low_lock, flags); |
| ipw2100_disable_interrupts(priv); |
| |
| /* Reset any fatal_error conditions */ |
| ipw2100_reset_fatalerror(priv); |
| spin_unlock_irqrestore(&priv->low_lock, flags); |
| |
| if (priv->status & STATUS_POWERED || |
| (priv->status & STATUS_RESET_PENDING)) { |
| /* Power cycle the card ... */ |
| if (ipw2100_power_cycle_adapter(priv)) { |
| printk(KERN_WARNING DRV_NAME |
| ": %s: Could not cycle adapter.\n", |
| priv->net_dev->name); |
| rc = 1; |
| goto exit; |
| } |
| } else |
| priv->status |= STATUS_POWERED; |
| |
| /* Load the firmware, start the clocks, etc. */ |
| if (ipw2100_start_adapter(priv)) { |
| printk(KERN_ERR DRV_NAME |
| ": %s: Failed to start the firmware.\n", |
| priv->net_dev->name); |
| rc = 1; |
| goto exit; |
| } |
| |
| ipw2100_initialize_ordinals(priv); |
| |
| /* Determine capabilities of this particular HW configuration */ |
| if (ipw2100_get_hw_features(priv)) { |
| printk(KERN_ERR DRV_NAME |
| ": %s: Failed to determine HW features.\n", |
| priv->net_dev->name); |
| rc = 1; |
| goto exit; |
| } |
| |
| /* Initialize the geo */ |
| if (libipw_set_geo(priv->ieee, &ipw_geos[0])) { |
| printk(KERN_WARNING DRV_NAME "Could not set geo\n"); |
| return 0; |
| } |
| priv->ieee->freq_band = LIBIPW_24GHZ_BAND; |
| |
| lock = LOCK_NONE; |
| if (ipw2100_set_ordinal(priv, IPW_ORD_PERS_DB_LOCK, &lock, &ord_len)) { |
| printk(KERN_ERR DRV_NAME |
| ": %s: Failed to clear ordinal lock.\n", |
| priv->net_dev->name); |
| rc = 1; |
| goto exit; |
| } |
| |
| priv->status &= ~STATUS_SCANNING; |
| |
| if (rf_kill_active(priv)) { |
| printk(KERN_INFO "%s: Radio is disabled by RF switch.\n", |
| priv->net_dev->name); |
| |
| if (priv->stop_rf_kill) { |
| priv->stop_rf_kill = 0; |
| schedule_delayed_work(&priv->rf_kill, |
| round_jiffies_relative(HZ)); |
| } |
| |
| deferred = 1; |
| } |
| |
| /* Turn on the interrupt so that commands can be processed */ |
| ipw2100_enable_interrupts(priv); |
| |
| /* Send all of the commands that must be sent prior to |
| * HOST_COMPLETE */ |
| if (ipw2100_adapter_setup(priv)) { |
| printk(KERN_ERR DRV_NAME ": %s: Failed to start the card.\n", |
| priv->net_dev->name); |
| rc = 1; |
| goto exit; |
| } |
| |
| if (!deferred) { |
| /* Enable the adapter - sends HOST_COMPLETE */ |
| if (ipw2100_enable_adapter(priv)) { |
| printk(KERN_ERR DRV_NAME ": " |
| "%s: failed in call to enable adapter.\n", |
| priv->net_dev->name); |
| ipw2100_hw_stop_adapter(priv); |
| rc = 1; |
| goto exit; |
| } |
| |
| /* Start a scan . . . */ |
| ipw2100_set_scan_options(priv); |
| ipw2100_start_scan(priv); |
| } |
| |
| exit: |
| return rc; |
| } |
| |
| static void ipw2100_down(struct ipw2100_priv *priv) |
| { |
| unsigned long flags; |
| union iwreq_data wrqu = { |
| .ap_addr = { |
| .sa_family = ARPHRD_ETHER} |
| }; |
| int associated = priv->status & STATUS_ASSOCIATED; |
| |
| /* Kill the RF switch timer */ |
| if (!priv->stop_rf_kill) { |
| priv->stop_rf_kill = 1; |
| cancel_delayed_work(&priv->rf_kill); |
| } |
| |
| /* Kill the firmware hang check timer */ |
| if (!priv->stop_hang_check) { |
| priv->stop_hang_check = 1; |
| cancel_delayed_work(&priv->hang_check); |
| } |
| |
| /* Kill any pending resets */ |
| if (priv->status & STATUS_RESET_PENDING) |
| cancel_delayed_work(&priv->reset_work); |
| |
| /* Make sure the interrupt is on so that FW commands will be |
| * processed correctly */ |
| spin_lock_irqsave(&priv->low_lock, flags); |
| ipw2100_enable_interrupts(priv); |
| spin_unlock_irqrestore(&priv->low_lock, flags); |
| |
| if (ipw2100_hw_stop_adapter(priv)) |
| printk(KERN_ERR DRV_NAME ": %s: Error stopping adapter.\n", |
| priv->net_dev->name); |
| |
| /* Do not disable the interrupt until _after_ we disable |
| * the adaptor. Otherwise the CARD_DISABLE command will never |
| * be ack'd by the firmware */ |
| spin_lock_irqsave(&priv->low_lock, flags); |
| ipw2100_disable_interrupts(priv); |
| spin_unlock_irqrestore(&priv->low_lock, flags); |
| |
| pm_qos_update_request(&ipw2100_pm_qos_req, PM_QOS_DEFAULT_VALUE); |
| |
| /* We have to signal any supplicant if we are disassociating */ |
| if (associated) |
| wireless_send_event(priv->net_dev, SIOCGIWAP, &wrqu, NULL); |
| |
| priv->status &= ~(STATUS_ASSOCIATED | STATUS_ASSOCIATING); |
| netif_carrier_off(priv->net_dev); |
| netif_stop_queue(priv->net_dev); |
| } |
| |
| /* Called by register_netdev() */ |
| static int ipw2100_net_init(struct net_device *dev) |
| { |
| struct ipw2100_priv *priv = libipw_priv(dev); |
| const struct libipw_geo *geo = libipw_get_geo(priv->ieee); |
| struct wireless_dev *wdev = &priv->ieee->wdev; |
| int ret; |
| int i; |
| |
| ret = ipw2100_up(priv, 1); |
| if (ret) |
| return ret; |
| |
| memcpy(wdev->wiphy->perm_addr, priv->mac_addr, ETH_ALEN); |
| |
| /* fill-out priv->ieee->bg_band */ |
| if (geo->bg_channels) { |
| struct ieee80211_supported_band *bg_band = &priv->ieee->bg_band; |
| |
| bg_band->band = IEEE80211_BAND_2GHZ; |
| bg_band->n_channels = geo->bg_channels; |
| bg_band->channels = kcalloc(geo->bg_channels, |
| sizeof(struct ieee80211_channel), |
| GFP_KERNEL); |
| if (!bg_band->channels) { |
| ipw2100_down(priv); |
| return -ENOMEM; |
| } |
| /* translate geo->bg to bg_band.channels */ |
| for (i = 0; i < geo->bg_channels; i++) { |
| bg_band->channels[i].band = IEEE80211_BAND_2GHZ; |
| bg_band->channels[i].center_freq = geo->bg[i].freq; |
| bg_band->channels[i].hw_value = geo->bg[i].channel; |
| bg_band->channels[i].max_power = geo->bg[i].max_power; |
| if (geo->bg[i].flags & LIBIPW_CH_PASSIVE_ONLY) |
| bg_band->channels[i].flags |= |
| IEEE80211_CHAN_PASSIVE_SCAN; |
| if (geo->bg[i].flags & LIBIPW_CH_NO_IBSS) |
| bg_band->channels[i].flags |= |
| IEEE80211_CHAN_NO_IBSS; |
| if (geo->bg[i].flags & LIBIPW_CH_RADAR_DETECT) |
| bg_band->channels[i].flags |= |
| IEEE80211_CHAN_RADAR; |
| /* No equivalent for LIBIPW_CH_80211H_RULES, |
| LIBIPW_CH_UNIFORM_SPREADING, or |
| LIBIPW_CH_B_ONLY... */ |
| } |
| /* point at bitrate info */ |
| bg_band->bitrates = ipw2100_bg_rates; |
| bg_band->n_bitrates = RATE_COUNT; |
| |
| wdev->wiphy->bands[IEEE80211_BAND_2GHZ] = bg_band; |
| } |
| |
| set_wiphy_dev(wdev->wiphy, &priv->pci_dev->dev); |
| if (wiphy_register(wdev->wiphy)) { |
| ipw2100_down(priv); |
| return -EIO; |
| } |
| return 0; |
| } |
| |
| static void ipw2100_reset_adapter(struct work_struct *work) |
| { |
| struct ipw2100_priv *priv = |
| container_of(work, struct ipw2100_priv, reset_work.work); |
| unsigned long flags; |
| union iwreq_data wrqu = { |
| .ap_addr = { |
| .sa_family = ARPHRD_ETHER} |
| }; |
| int associated = priv->status & STATUS_ASSOCIATED; |
| |
| spin_lock_irqsave(&priv->low_lock, flags); |
| IPW_DEBUG_INFO(": %s: Restarting adapter.\n", priv->net_dev->name); |
| priv->resets++; |
| priv->status &= ~(STATUS_ASSOCIATED | STATUS_ASSOCIATING); |
| priv->status |= STATUS_SECURITY_UPDATED; |
| |
| /* Force a power cycle even if interface hasn't been opened |
| * yet */ |
| cancel_delayed_work(&priv->reset_work); |
| priv->status |= STATUS_RESET_PENDING; |
| spin_unlock_irqrestore(&priv->low_lock, flags); |
| |
| mutex_lock(&priv->action_mutex); |
| /* stop timed checks so that they don't interfere with reset */ |
| priv->stop_hang_check = 1; |
| cancel_delayed_work(&priv->hang_check); |
| |
| /* We have to signal any supplicant if we are disassociating */ |
| if (associated) |
| wireless_send_event(priv->net_dev, SIOCGIWAP, &wrqu, NULL); |
| |
| ipw2100_up(priv, 0); |
| mutex_unlock(&priv->action_mutex); |
| |
| } |
| |
| static void isr_indicate_associated(struct ipw2100_priv *priv, u32 status) |
| { |
| |
| #define MAC_ASSOCIATION_READ_DELAY (HZ) |
| int ret; |
| unsigned int len, essid_len; |
| char essid[IW_ESSID_MAX_SIZE]; |
| u32 txrate; |
| u32 chan; |
| char *txratename; |
| u8 bssid[ETH_ALEN]; |
| DECLARE_SSID_BUF(ssid); |
| |
| /* |
| * TBD: BSSID is usually 00:00:00:00:00:00 here and not |
| * an actual MAC of the AP. Seems like FW sets this |
| * address too late. Read it later and expose through |
| * /proc or schedule a later task to query and update |
| */ |
| |
| essid_len = IW_ESSID_MAX_SIZE; |
| ret = ipw2100_get_ordinal(priv, IPW_ORD_STAT_ASSN_SSID, |
| essid, &essid_len); |
| if (ret) { |
| IPW_DEBUG_INFO("failed querying ordinals at line %d\n", |
| __LINE__); |
| return; |
| } |
| |
| len = sizeof(u32); |
| ret = ipw2100_get_ordinal(priv, IPW_ORD_CURRENT_TX_RATE, &txrate, &len); |
| if (ret) { |
| IPW_DEBUG_INFO("failed querying ordinals at line %d\n", |
| __LINE__); |
| return; |
| } |
| |
| len = sizeof(u32); |
| ret = ipw2100_get_ordinal(priv, IPW_ORD_OUR_FREQ, &chan, &len); |
| if (ret) { |
| IPW_DEBUG_INFO("failed querying ordinals at line %d\n", |
| __LINE__); |
| return; |
| } |
| len = ETH_ALEN; |
| ipw2100_get_ordinal(priv, IPW_ORD_STAT_ASSN_AP_BSSID, &bssid, &len); |
| if (ret) { |
| IPW_DEBUG_INFO("failed querying ordinals at line %d\n", |
| __LINE__); |
| return; |
| } |
| memcpy(priv->ieee->bssid, bssid, ETH_ALEN); |
| |
| switch (txrate) { |
| case TX_RATE_1_MBIT: |
| txratename = "1Mbps"; |
| break; |
| case TX_RATE_2_MBIT: |
| txratename = "2Mbsp"; |
| break; |
| case TX_RATE_5_5_MBIT: |
| txratename = "5.5Mbps"; |
| break; |
| case TX_RATE_11_MBIT: |
| txratename = "11Mbps"; |
| break; |
| default: |
| IPW_DEBUG_INFO("Unknown rate: %d\n", txrate); |
| txratename = "unknown rate"; |
| break; |
| } |
| |
| IPW_DEBUG_INFO("%s: Associated with '%s' at %s, channel %d (BSSID=%pM)\n", |
| priv->net_dev->name, print_ssid(ssid, essid, essid_len), |
| txratename, chan, bssid); |
| |
| /* now we copy read ssid into dev */ |
| if (!(priv->config & CFG_STATIC_ESSID)) { |
| priv->essid_len = min((u8) essid_len, (u8) IW_ESSID_MAX_SIZE); |
| memcpy(priv->essid, essid, priv->essid_len); |
| } |
| priv->channel = chan; |
| memcpy(priv->bssid, bssid, ETH_ALEN); |
| |
| priv->status |= STATUS_ASSOCIATING; |
| priv->connect_start = get_seconds(); |
| |
| schedule_delayed_work(&priv->wx_event_work, HZ / 10); |
| } |
| |
| static int ipw2100_set_essid(struct ipw2100_priv *priv, char *essid, |
| int length, int batch_mode) |
| { |
| int ssid_len = min(length, IW_ESSID_MAX_SIZE); |
| struct host_command cmd = { |
| .host_command = SSID, |
| .host_command_sequence = 0, |
| .host_command_length = ssid_len |
| }; |
| int err; |
| DECLARE_SSID_BUF(ssid); |
| |
| IPW_DEBUG_HC("SSID: '%s'\n", print_ssid(ssid, essid, ssid_len)); |
| |
| if (ssid_len) |
| memcpy(cmd.host_command_parameters, essid, ssid_len); |
| |
| if (!batch_mode) { |
| err = ipw2100_disable_adapter(priv); |
| if (err) |
| return err; |
| } |
| |
| /* Bug in FW currently doesn't honor bit 0 in SET_SCAN_OPTIONS to |
| * disable auto association -- so we cheat by setting a bogus SSID */ |
| if (!ssid_len && !(priv->config & CFG_ASSOCIATE)) { |
| int i; |
| u8 *bogus = (u8 *) cmd.host_command_parameters; |
| for (i = 0; i < IW_ESSID_MAX_SIZE; i++) |
| bogus[i] = 0x18 + i; |
| cmd.host_command_length = IW_ESSID_MAX_SIZE; |
| } |
| |
| /* NOTE: We always send the SSID command even if the provided ESSID is |
| * the same as what we currently think is set. */ |
| |
| err = ipw2100_hw_send_command(priv, &cmd); |
| if (!err) { |
| memset(priv->essid + ssid_len, 0, IW_ESSID_MAX_SIZE - ssid_len); |
| memcpy(priv->essid, essid, ssid_len); |
| priv->essid_len = ssid_len; |
| } |
| |
| if (!batch_mode) { |
| if (ipw2100_enable_adapter(priv)) |
| err = -EIO; |
| } |
| |
| return err; |
| } |
| |
| static void isr_indicate_association_lost(struct ipw2100_priv *priv, u32 status) |
| { |
| DECLARE_SSID_BUF(ssid); |
| |
| IPW_DEBUG(IPW_DL_NOTIF | IPW_DL_STATE | IPW_DL_ASSOC, |
| "disassociated: '%s' %pM\n", |
| print_ssid(ssid, priv->essid, priv->essid_len), |
| priv->bssid); |
| |
| priv->status &= ~(STATUS_ASSOCIATED | STATUS_ASSOCIATING); |
| |
| if (priv->status & STATUS_STOPPING) { |
| IPW_DEBUG_INFO("Card is stopping itself, discard ASSN_LOST.\n"); |
| return; |
| } |
| |
| memset(priv->bssid, 0, ETH_ALEN); |
| memset(priv->ieee->bssid, 0, ETH_ALEN); |
| |
| netif_carrier_off(priv->net_dev); |
| netif_stop_queue(priv->net_dev); |
| |
| if (!(priv->status & STATUS_RUNNING)) |
| return; |
| |
| if (priv->status & STATUS_SECURITY_UPDATED) |
| schedule_delayed_work(&priv->security_work, 0); |
| |
| schedule_delayed_work(&priv->wx_event_work, 0); |
| } |
| |
| static void isr_indicate_rf_kill(struct ipw2100_priv *priv, u32 status) |
| { |
| IPW_DEBUG_INFO("%s: RF Kill state changed to radio OFF.\n", |
| priv->net_dev->name); |
| |
| /* RF_KILL is now enabled (else we wouldn't be here) */ |
| wiphy_rfkill_set_hw_state(priv->ieee->wdev.wiphy, true); |
| priv->status |= STATUS_RF_KILL_HW; |
| |
| /* Make sure the RF Kill check timer is running */ |
| priv->stop_rf_kill = 0; |
| cancel_delayed_work(&priv->rf_kill); |
| schedule_delayed_work(&priv->rf_kill, round_jiffies_relative(HZ)); |
| } |
| |
| static void send_scan_event(void *data) |
| { |
| struct ipw2100_priv *priv = data; |
| union iwreq_data wrqu; |
| |
| wrqu.data.length = 0; |
| wrqu.data.flags = 0; |
| wireless_send_event(priv->net_dev, SIOCGIWSCAN, &wrqu, NULL); |
| } |
| |
| static void ipw2100_scan_event_later(struct work_struct *work) |
| { |
| send_scan_event(container_of(work, struct ipw2100_priv, |
| scan_event_later.work)); |
| } |
| |
| static void ipw2100_scan_event_now(struct work_struct *work) |
| { |
| send_scan_event(container_of(work, struct ipw2100_priv, |
| scan_event_now)); |
| } |
| |
| static void isr_scan_complete(struct ipw2100_priv *priv, u32 status) |
| { |
| IPW_DEBUG_SCAN("scan complete\n"); |
| /* Age the scan results... */ |
| priv->ieee->scans++; |
| priv->status &= ~STATUS_SCANNING; |
| |
| /* Only userspace-requested scan completion events go out immediately */ |
| if (!priv->user_requested_scan) { |
| if (!delayed_work_pending(&priv->scan_event_later)) |
| schedule_delayed_work(&priv->scan_event_later, |
| round_jiffies_relative(msecs_to_jiffies(4000))); |
| } else { |
| priv->user_requested_scan = 0; |
| cancel_delayed_work(&priv->scan_event_later); |
| schedule_work(&priv->scan_event_now); |
| } |
| } |
| |
| #ifdef CONFIG_IPW2100_DEBUG |
| #define IPW2100_HANDLER(v, f) { v, f, # v } |
| struct ipw2100_status_indicator { |
| int status; |
| void (*cb) (struct ipw2100_priv * priv, u32 status); |
| char *name; |
| }; |
| #else |
| #define IPW2100_HANDLER(v, f) { v, f } |
| struct ipw2100_status_indicator { |
| int status; |
| void (*cb) (struct ipw2100_priv * priv, u32 status); |
| }; |
| #endif /* CONFIG_IPW2100_DEBUG */ |
| |
| static void isr_indicate_scanning(struct ipw2100_priv *priv, u32 status) |
| { |
| IPW_DEBUG_SCAN("Scanning...\n"); |
| priv->status |= STATUS_SCANNING; |
| } |
| |
| static const struct ipw2100_status_indicator status_handlers[] = { |
| IPW2100_HANDLER(IPW_STATE_INITIALIZED, NULL), |
| IPW2100_HANDLER(IPW_STATE_COUNTRY_FOUND, NULL), |
| IPW2100_HANDLER(IPW_STATE_ASSOCIATED, isr_indicate_associated), |
| IPW2100_HANDLER(IPW_STATE_ASSN_LOST, isr_indicate_association_lost), |
| IPW2100_HANDLER(IPW_STATE_ASSN_CHANGED, NULL), |
| IPW2100_HANDLER(IPW_STATE_SCAN_COMPLETE, isr_scan_complete), |
| IPW2100_HANDLER(IPW_STATE_ENTERED_PSP, NULL), |
| IPW2100_HANDLER(IPW_STATE_LEFT_PSP, NULL), |
| IPW2100_HANDLER(IPW_STATE_RF_KILL, isr_indicate_rf_kill), |
| IPW2100_HANDLER(IPW_STATE_DISABLED, NULL), |
| IPW2100_HANDLER(IPW_STATE_POWER_DOWN, NULL), |
| IPW2100_HANDLER(IPW_STATE_SCANNING, isr_indicate_scanning), |
| IPW2100_HANDLER(-1, NULL) |
| }; |
| |
| static void isr_status_change(struct ipw2100_priv *priv, int status) |
| { |
| int i; |
| |
| if (status == IPW_STATE_SCANNING && |
| priv->status & STATUS_ASSOCIATED && |
| !(priv->status & STATUS_SCANNING)) { |
| IPW_DEBUG_INFO("Scan detected while associated, with " |
| "no scan request. Restarting firmware.\n"); |
| |
| /* Wake up any sleeping jobs */ |
| schedule_reset(priv); |
| } |
| |
| for (i = 0; status_handlers[i].status != -1; i++) { |
| if (status == status_handlers[i].status) { |
| IPW_DEBUG_NOTIF("Status change: %s\n", |
| status_handlers[i].name); |
| if (status_handlers[i].cb) |
| status_handlers[i].cb(priv, status); |
| priv->wstats.status = status; |
| return; |
| } |
| } |
| |
| IPW_DEBUG_NOTIF("unknown status received: %04x\n", status); |
| } |
| |
| static void isr_rx_complete_command(struct ipw2100_priv *priv, |
| struct ipw2100_cmd_header *cmd) |
| { |
| #ifdef CONFIG_IPW2100_DEBUG |
| if (cmd->host_command_reg < ARRAY_SIZE(command_types)) { |
| IPW_DEBUG_HC("Command completed '%s (%d)'\n", |
| command_types[cmd->host_command_reg], |
| cmd->host_command_reg); |
| } |
| #endif |
| if (cmd->host_command_reg == HOST_COMPLETE) |
| priv->status |= STATUS_ENABLED; |
| |
| if (cmd->host_command_reg == CARD_DISABLE) |
| priv->status &= ~STATUS_ENABLED; |
| |
| priv->status &= ~STATUS_CMD_ACTIVE; |
| |
| wake_up_interruptible(&priv->wait_command_queue); |
| } |
| |
| #ifdef CONFIG_IPW2100_DEBUG |
| static const char *frame_types[] = { |
| "COMMAND_STATUS_VAL", |
| "STATUS_CHANGE_VAL", |
| "P80211_DATA_VAL", |
| "P8023_DATA_VAL", |
| "HOST_NOTIFICATION_VAL" |
| }; |
| #endif |
| |
| static int ipw2100_alloc_skb(struct ipw2100_priv *priv, |
| struct ipw2100_rx_packet *packet) |
| { |
| packet->skb = dev_alloc_skb(sizeof(struct ipw2100_rx)); |
| if (!packet->skb) |
| return -ENOMEM; |
| |
| packet->rxp = (struct ipw2100_rx *)packet->skb->data; |
| packet->dma_addr = pci_map_single(priv->pci_dev, packet->skb->data, |
| sizeof(struct ipw2100_rx), |
| PCI_DMA_FROMDEVICE); |
| /* NOTE: pci_map_single does not return an error code, and 0 is a valid |
| * dma_addr */ |
| |
| return 0; |
| } |
| |
| #define SEARCH_ERROR 0xffffffff |
| #define SEARCH_FAIL 0xfffffffe |
| #define SEARCH_SUCCESS 0xfffffff0 |
| #define SEARCH_DISCARD 0 |
| #define SEARCH_SNAPSHOT 1 |
| |
| #define SNAPSHOT_ADDR(ofs) (priv->snapshot[((ofs) >> 12) & 0xff] + ((ofs) & 0xfff)) |
| static void ipw2100_snapshot_free(struct ipw2100_priv *priv) |
| { |
| int i; |
| if (!priv->snapshot[0]) |
| return; |
| for (i = 0; i < 0x30; i++) |
| kfree(priv->snapshot[i]); |
| priv->snapshot[0] = NULL; |
| } |
| |
| #ifdef IPW2100_DEBUG_C3 |
| static int ipw2100_snapshot_alloc(struct ipw2100_priv *priv) |
| { |
| int i; |
| if (priv->snapshot[0]) |
| return 1; |
| for (i = 0; i < 0x30; i++) { |
| priv->snapshot[i] = kmalloc(0x1000, GFP_ATOMIC); |
| if (!priv->snapshot[i]) { |
| IPW_DEBUG_INFO("%s: Error allocating snapshot " |
| "buffer %d\n", priv->net_dev->name, i); |
| while (i > 0) |
| kfree(priv->snapshot[--i]); |
| priv->snapshot[0] = NULL; |
| return 0; |
| } |
| } |
| |
| return 1; |
| } |
| |
| static u32 ipw2100_match_buf(struct ipw2100_priv *priv, u8 * in_buf, |
| size_t len, int mode) |
| { |
| u32 i, j; |
| u32 tmp; |
| u8 *s, *d; |
| u32 ret; |
| |
| s = in_buf; |
| if (mode == SEARCH_SNAPSHOT) { |
| if (!ipw2100_snapshot_alloc(priv)) |
| mode = SEARCH_DISCARD; |
| } |
| |
| for (ret = SEARCH_FAIL, i = 0; i < 0x30000; i += 4) { |
| read_nic_dword(priv->net_dev, i, &tmp); |
| if (mode == SEARCH_SNAPSHOT) |
| *(u32 *) SNAPSHOT_ADDR(i) = tmp; |
| if (ret == SEARCH_FAIL) { |
| d = (u8 *) & tmp; |
| for (j = 0; j < 4; j++) { |
| if (*s != *d) { |
| s = in_buf; |
| continue; |
| } |
| |
| s++; |
| d++; |
| |
| if ((s - in_buf) == len) |
| ret = (i + j) - len + 1; |
| } |
| } else if (mode == SEARCH_DISCARD) |
| return ret; |
| } |
| |
| return ret; |
| } |
| #endif |
| |
| /* |
| * |
| * 0) Disconnect the SKB from the firmware (just unmap) |
| * 1) Pack the ETH header into the SKB |
| * 2) Pass the SKB to the network stack |
| * |
| * When packet is provided by the firmware, it contains the following: |
| * |
| * . libipw_hdr |
| * . libipw_snap_hdr |
| * |
| * The size of the constructed ethernet |
| * |
| */ |
| #ifdef IPW2100_RX_DEBUG |
| static u8 packet_data[IPW_RX_NIC_BUFFER_LENGTH]; |
| #endif |
| |
| static void ipw2100_corruption_detected(struct ipw2100_priv *priv, int i) |
| { |
| #ifdef IPW2100_DEBUG_C3 |
| struct ipw2100_status *status = &priv->status_queue.drv[i]; |
| u32 match, reg; |
| int j; |
| #endif |
| |
| IPW_DEBUG_INFO(": PCI latency error detected at 0x%04zX.\n", |
| i * sizeof(struct ipw2100_status)); |
| |
| #ifdef IPW2100_DEBUG_C3 |
| /* Halt the firmware so we can get a good image */ |
| write_register(priv->net_dev, IPW_REG_RESET_REG, |
| IPW_AUX_HOST_RESET_REG_STOP_MASTER); |
| j = 5; |
| do { |
| udelay(IPW_WAIT_RESET_MASTER_ASSERT_COMPLETE_DELAY); |
| read_register(priv->net_dev, IPW_REG_RESET_REG, ®); |
| |
| if (reg & IPW_AUX_HOST_RESET_REG_MASTER_DISABLED) |
| break; |
| } while (j--); |
| |
| match = ipw2100_match_buf(priv, (u8 *) status, |
| sizeof(struct ipw2100_status), |
| SEARCH_SNAPSHOT); |
| if (match < SEARCH_SUCCESS) |
| IPW_DEBUG_INFO("%s: DMA status match in Firmware at " |
| "offset 0x%06X, length %d:\n", |
| priv->net_dev->name, match, |
| sizeof(struct ipw2100_status)); |
| else |
| IPW_DEBUG_INFO("%s: No DMA status match in " |
| "Firmware.\n", priv->net_dev->name); |
| |
| printk_buf((u8 *) priv->status_queue.drv, |
| sizeof(struct ipw2100_status) * RX_QUEUE_LENGTH); |
| #endif |
| |
| priv->fatal_error = IPW2100_ERR_C3_CORRUPTION; |
| priv->net_dev->stats.rx_errors++; |
| schedule_reset(priv); |
| } |
| |
| static void isr_rx(struct ipw2100_priv *priv, int i, |
| struct libipw_rx_stats *stats) |
| { |
| struct net_device *dev = priv->net_dev; |
| struct ipw2100_status *status = &priv->status_queue.drv[i]; |
| struct ipw2100_rx_packet *packet = &priv->rx_buffers[i]; |
| |
| IPW_DEBUG_RX("Handler...\n"); |
| |
| if (unlikely(status->frame_size > skb_tailroom(packet->skb))) { |
| IPW_DEBUG_INFO("%s: frame_size (%u) > skb_tailroom (%u)!" |
| " Dropping.\n", |
| dev->name, |
| status->frame_size, skb_tailroom(packet->skb)); |
| dev->stats.rx_errors++; |
| return; |
| } |
| |
| if (unlikely(!netif_running(dev))) { |
| dev->stats.rx_errors++; |
| priv->wstats.discard.misc++; |
| IPW_DEBUG_DROP("Dropping packet while interface is not up.\n"); |
| return; |
| } |
| |
| if (unlikely(priv->ieee->iw_mode != IW_MODE_MONITOR && |
| !(priv->status & STATUS_ASSOCIATED))) { |
| IPW_DEBUG_DROP("Dropping packet while not associated.\n"); |
| priv->wstats.discard.misc++; |
| return; |
| } |
| |
| pci_unmap_single(priv->pci_dev, |
| packet->dma_addr, |
| sizeof(struct ipw2100_rx), PCI_DMA_FROMDEVICE); |
| |
| skb_put(packet->skb, status->frame_size); |
| |
| #ifdef IPW2100_RX_DEBUG |
| /* Make a copy of the frame so we can dump it to the logs if |
| * libipw_rx fails */ |
| skb_copy_from_linear_data(packet->skb, packet_data, |
| min_t(u32, status->frame_size, |
| IPW_RX_NIC_BUFFER_LENGTH)); |
| #endif |
| |
| if (!libipw_rx(priv->ieee, packet->skb, stats)) { |
| #ifdef IPW2100_RX_DEBUG |
| IPW_DEBUG_DROP("%s: Non consumed packet:\n", |
| dev->name); |
| printk_buf(IPW_DL_DROP, packet_data, status->frame_size); |
| #endif |
| dev->stats.rx_errors++; |
| |
| /* libipw_rx failed, so it didn't free the SKB */ |
| dev_kfree_skb_any(packet->skb); |
| packet->skb = NULL; |
| } |
| |
| /* We need to allocate a new SKB and attach it to the RDB. */ |
| if (unlikely(ipw2100_alloc_skb(priv, packet))) { |
| printk(KERN_WARNING DRV_NAME ": " |
| "%s: Unable to allocate SKB onto RBD ring - disabling " |
| "adapter.\n", dev->name); |
| /* TODO: schedule adapter shutdown */ |
| IPW_DEBUG_INFO("TODO: Shutdown adapter...\n"); |
| } |
| |
| /* Update the RDB entry */ |
| priv->rx_queue.drv[i].host_addr = packet->dma_addr; |
| } |
| |
| #ifdef CONFIG_IPW2100_MONITOR |
| |
| static void isr_rx_monitor(struct ipw2100_priv *priv, int i, |
| struct libipw_rx_stats *stats) |
| { |
| struct net_device *dev = priv->net_dev; |
| struct ipw2100_status *status = &priv->status_queue.drv[i]; |
| struct ipw2100_rx_packet *packet = &priv->rx_buffers[i]; |
| |
| /* Magic struct that slots into the radiotap header -- no reason |
| * to build this manually element by element, we can write it much |
| * more efficiently than we can parse it. ORDER MATTERS HERE */ |
| struct ipw_rt_hdr { |
| struct ieee80211_radiotap_header rt_hdr; |
| s8 rt_dbmsignal; /* signal in dbM, kluged to signed */ |
| } *ipw_rt; |
| |
| IPW_DEBUG_RX("Handler...\n"); |
| |
| if (unlikely(status->frame_size > skb_tailroom(packet->skb) - |
| sizeof(struct ipw_rt_hdr))) { |
| IPW_DEBUG_INFO("%s: frame_size (%u) > skb_tailroom (%u)!" |
| " Dropping.\n", |
| dev->name, |
| status->frame_size, |
| skb_tailroom(packet->skb)); |
| dev->stats.rx_errors++; |
| return; |
| } |
| |
| if (unlikely(!netif_running(dev))) { |
| dev->stats.rx_errors++; |
| priv->wstats.discard.misc++; |
| IPW_DEBUG_DROP("Dropping packet while interface is not up.\n"); |
| return; |
| } |
| |
| if (unlikely(priv->config & CFG_CRC_CHECK && |
| status->flags & IPW_STATUS_FLAG_CRC_ERROR)) { |
| IPW_DEBUG_RX("CRC error in packet. Dropping.\n"); |
| dev->stats.rx_errors++; |
| return; |
| } |
| |
| pci_unmap_single(priv->pci_dev, packet->dma_addr, |
| sizeof(struct ipw2100_rx), PCI_DMA_FROMDEVICE); |
| memmove(packet->skb->data + sizeof(struct ipw_rt_hdr), |
| packet->skb->data, status->frame_size); |
| |
| ipw_rt = (struct ipw_rt_hdr *) packet->skb->data; |
| |
| ipw_rt->rt_hdr.it_version = PKTHDR_RADIOTAP_VERSION; |
| ipw_rt->rt_hdr.it_pad = 0; /* always good to zero */ |
| ipw_rt->rt_hdr.it_len = cpu_to_le16(sizeof(struct ipw_rt_hdr)); /* total hdr+data */ |
| |
| ipw_rt->rt_hdr.it_present = cpu_to_le32(1 << IEEE80211_RADIOTAP_DBM_ANTSIGNAL); |
| |
| ipw_rt->rt_dbmsignal = status->rssi + IPW2100_RSSI_TO_DBM; |
| |
| skb_put(packet->skb, status->frame_size + sizeof(struct ipw_rt_hdr)); |
| |
| if (!libipw_rx(priv->ieee, packet->skb, stats)) { |
| dev->stats.rx_errors++; |
| |
| /* libipw_rx failed, so it didn't free the SKB */ |
| dev_kfree_skb_any(packet->skb); |
| packet->skb = NULL; |
| } |
| |
| /* We need to allocate a new SKB and attach it to the RDB. */ |
| if (unlikely(ipw2100_alloc_skb(priv, packet))) { |
| IPW_DEBUG_WARNING( |
| "%s: Unable to allocate SKB onto RBD ring - disabling " |
| "adapter.\n", dev->name); |
| /* TODO: schedule adapter shutdown */ |
| IPW_DEBUG_INFO("TODO: Shutdown adapter...\n"); |
| } |
| |
| /* Update the RDB entry */ |
| priv->rx_queue.drv[i].host_addr = packet->dma_addr; |
| } |
| |
| #endif |
| |
| static int ipw2100_corruption_check(struct ipw2100_priv *priv, int i) |
| { |
| struct ipw2100_status *status = &priv->status_queue.drv[i]; |
| struct ipw2100_rx *u = priv->rx_buffers[i].rxp; |
| u16 frame_type = status->status_fields & STATUS_TYPE_MASK; |
| |
| switch (frame_type) { |
| case COMMAND_STATUS_VAL: |
| return (status->frame_size != sizeof(u->rx_data.command)); |
| case STATUS_CHANGE_VAL: |
| return (status->frame_size != sizeof(u->rx_data.status)); |
| case HOST_NOTIFICATION_VAL: |
| return (status->frame_size < sizeof(u->rx_data.notification)); |
| case P80211_DATA_VAL: |
| case P8023_DATA_VAL: |
| #ifdef CONFIG_IPW2100_MONITOR |
| return 0; |
| #else |
| switch (WLAN_FC_GET_TYPE(le16_to_cpu(u->rx_data.header.frame_ctl))) { |
| case IEEE80211_FTYPE_MGMT: |
| case IEEE80211_FTYPE_CTL: |
| return 0; |
| case IEEE80211_FTYPE_DATA: |
| return (status->frame_size > |
| IPW_MAX_802_11_PAYLOAD_LENGTH); |
| } |
| #endif |
| } |
| |
| return 1; |
| } |
| |
| /* |
| * ipw2100 interrupts are disabled at this point, and the ISR |
| * is the only code that calls this method. So, we do not need |
| * to play with any locks. |
| * |
| * RX Queue works as follows: |
| * |
| * Read index - firmware places packet in entry identified by the |
| * Read index and advances Read index. In this manner, |
| * Read index will always point to the next packet to |
| * be filled--but not yet valid. |
| * |
| * Write index - driver fills this entry with an unused RBD entry. |
| * This entry has not filled by the firmware yet. |
| * |
| * In between the W and R indexes are the RBDs that have been received |
| * but not yet processed. |
| * |
| * The process of handling packets will start at WRITE + 1 and advance |
| * until it reaches the READ index. |
| * |
| * The WRITE index is cached in the variable 'priv->rx_queue.next'. |
| * |
| */ |
| static void __ipw2100_rx_process(struct ipw2100_priv *priv) |
| { |
| struct ipw2100_bd_queue *rxq = &priv->rx_queue; |
| struct ipw2100_status_queue *sq = &priv->status_queue; |
| struct ipw2100_rx_packet *packet; |
| u16 frame_type; |
| u32 r, w, i, s; |
| struct ipw2100_rx *u; |
| struct libipw_rx_stats stats = { |
| .mac_time = jiffies, |
| }; |
| |
| read_register(priv->net_dev, IPW_MEM_HOST_SHARED_RX_READ_INDEX, &r); |
| read_register(priv->net_dev, IPW_MEM_HOST_SHARED_RX_WRITE_INDEX, &w); |
| |
| if (r >= rxq->entries) { |
| IPW_DEBUG_RX("exit - bad read index\n"); |
| return; |
| } |
| |
| i = (rxq->next + 1) % rxq->entries; |
| s = i; |
| while (i != r) { |
| /* IPW_DEBUG_RX("r = %d : w = %d : processing = %d\n", |
| r, rxq->next, i); */ |
| |
| packet = &priv->rx_buffers[i]; |
| |
| /* Sync the DMA for the RX buffer so CPU is sure to get |
| * the correct values */ |
| pci_dma_sync_single_for_cpu(priv->pci_dev, packet->dma_addr, |
| sizeof(struct ipw2100_rx), |
| PCI_DMA_FROMDEVICE); |
| |
| if (unlikely(ipw2100_corruption_check(priv, i))) { |
| ipw2100_corruption_detected(priv, i); |
| goto increment; |
| } |
| |
| u = packet->rxp; |
| frame_type = sq->drv[i].status_fields & STATUS_TYPE_MASK; |
| stats.rssi = sq->drv[i].rssi + IPW2100_RSSI_TO_DBM; |
| stats.len = sq->drv[i].frame_size; |
| |
| stats.mask = 0; |
| if (stats.rssi != 0) |
| stats.mask |= LIBIPW_STATMASK_RSSI; |
| stats.freq = LIBIPW_24GHZ_BAND; |
| |
| IPW_DEBUG_RX("%s: '%s' frame type received (%d).\n", |
| priv->net_dev->name, frame_types[frame_type], |
| stats.len); |
| |
| switch (frame_type) { |
| case COMMAND_STATUS_VAL: |
| /* Reset Rx watchdog */ |
| isr_rx_complete_command(priv, &u->rx_data.command); |
| break; |
| |
| case STATUS_CHANGE_VAL: |
| isr_status_change(priv, u->rx_data.status); |
| break; |
| |
| case P80211_DATA_VAL: |
| case P8023_DATA_VAL: |
| #ifdef CONFIG_IPW2100_MONITOR |
| if (priv->ieee->iw_mode == IW_MODE_MONITOR) { |
| isr_rx_monitor(priv, i, &stats); |
| break; |
| } |
| #endif |
| if (stats.len < sizeof(struct libipw_hdr_3addr)) |
| break; |
| switch (WLAN_FC_GET_TYPE(le16_to_cpu(u->rx_data.header.frame_ctl))) { |
| case IEEE80211_FTYPE_MGMT: |
| libipw_rx_mgt(priv->ieee, |
| &u->rx_data.header, &stats); |
| break; |
| |
| case IEEE80211_FTYPE_CTL: |
| break; |
| |
| case IEEE80211_FTYPE_DATA: |
| isr_rx(priv, i, &stats); |
| break; |
| |
| } |
| break; |
| } |
| |
| increment: |
| /* clear status field associated with this RBD */ |
| rxq->drv[i].status.info.field = 0; |
| |
| i = (i + 1) % rxq->entries; |
| } |
| |
| if (i != s) { |
| /* backtrack one entry, wrapping to end if at 0 */ |
| rxq->next = (i ? i : rxq->entries) - 1; |
| |
| write_register(priv->net_dev, |
| IPW_MEM_HOST_SHARED_RX_WRITE_INDEX, rxq->next); |
| } |
| } |
| |
| /* |
| * __ipw2100_tx_process |
| * |
| * This routine will determine whether the next packet on |
| * the fw_pend_list has been processed by the firmware yet. |
| * |
| * If not, then it does nothing and returns. |
| * |
| * If so, then it removes the item from the fw_pend_list, frees |
| * any associated storage, and places the item back on the |
| * free list of its source (either msg_free_list or tx_free_list) |
| * |
| * TX Queue works as follows: |
| * |
| * Read index - points to the next TBD that the firmware will |
| * process. The firmware will read the data, and once |
| * done processing, it will advance the Read index. |
| * |
| * Write index - driver fills this entry with an constructed TBD |
| * entry. The Write index is not advanced until the |
| * packet has been configured. |
| * |
| * In between the W and R indexes are the TBDs that have NOT been |
| * processed. Lagging behind the R index are packets that have |
| * been processed but have not been freed by the driver. |
| * |
| * In order to free old storage, an internal index will be maintained |
| * that points to the next packet to be freed. When all used |
| * packets have been freed, the oldest index will be the same as the |
| * firmware's read index. |
| * |
| * The OLDEST index is cached in the variable 'priv->tx_queue.oldest' |
| * |
| * Because the TBD structure can not contain arbitrary data, the |
| * driver must keep an internal queue of cached allocations such that |
| * it can put that data back into the tx_free_list and msg_free_list |
| * for use by future command and data packets. |
| * |
| */ |
| static int __ipw2100_tx_process(struct ipw2100_priv *priv) |
| { |
| struct ipw2100_bd_queue *txq = &priv->tx_queue; |
| struct ipw2100_bd *tbd; |
| struct list_head *element; |
| struct ipw2100_tx_packet *packet; |
| int descriptors_used; |
| int e, i; |
| u32 r, w, frag_num = 0; |
| |
| if (list_empty(&priv->fw_pend_list)) |
| return 0; |
| |
| element = priv->fw_pend_list.next; |
| |
| packet = list_entry(element, struct ipw2100_tx_packet, list); |
| tbd = &txq->drv[packet->index]; |
| |
| /* Determine how many TBD entries must be finished... */ |
| switch (packet->type) { |
| case COMMAND: |
| /* COMMAND uses only one slot; don't advance */ |
| descriptors_used = 1; |
| e = txq->oldest; |
| break; |
| |
| case DATA: |
| /* DATA uses two slots; advance and loop position. */ |
| descriptors_used = tbd->num_fragments; |
| frag_num = tbd->num_fragments - 1; |
| e = txq->oldest + frag_num; |
| e %= txq->entries; |
| break; |
| |
| default: |
| printk(KERN_WARNING DRV_NAME ": %s: Bad fw_pend_list entry!\n", |
| priv->net_dev->name); |
| return 0; |
| } |
| |
| /* if the last TBD is not done by NIC yet, then packet is |
| * not ready to be released. |
| * |
| */ |
| read_register(priv->net_dev, IPW_MEM_HOST_SHARED_TX_QUEUE_READ_INDEX, |
| &r); |
| read_register(priv->net_dev, IPW_MEM_HOST_SHARED_TX_QUEUE_WRITE_INDEX, |
| &w); |
| if (w != txq->next) |
| printk(KERN_WARNING DRV_NAME ": %s: write index mismatch\n", |
| priv->net_dev->name); |
| |
| /* |
| * txq->next is the index of the last packet written txq->oldest is |
| * the index of the r is the index of the next packet to be read by |
| * firmware |
| */ |
| |
| /* |
| * Quick graphic to help you visualize the following |
| * if / else statement |
| * |
| * ===>| s---->|=============== |
| * e>| |
| * | a | b | c | d | e | f | g | h | i | j | k | l |
| * r---->| |
| * w |
| * |
| * w - updated by driver |
| * r - updated by firmware |
| * s - start of oldest BD entry (txq->oldest) |
| * e - end of oldest BD entry |
| * |
| */ |
| if (!((r <= w && (e < r || e >= w)) || (e < r && e >= w))) { |
| IPW_DEBUG_TX("exit - no processed packets ready to release.\n"); |
| return 0; |
| } |
| |
| list_del(element); |
| DEC_STAT(&priv->fw_pend_stat); |
| |
| #ifdef CONFIG_IPW2100_DEBUG |
| { |
| i = txq->oldest; |
| IPW_DEBUG_TX("TX%d V=%p P=%04X T=%04X L=%d\n", i, |
| &txq->drv[i], |
| (u32) (txq->nic + i * sizeof(struct ipw2100_bd)), |
| txq->drv[i].host_addr, txq->drv[i].buf_length); |
| |
| if (packet->type == DATA) { |
| i = (i + 1) % txq->entries; |
| |
| IPW_DEBUG_TX("TX%d V=%p P=%04X T=%04X L=%d\n", i, |
| &txq->drv[i], |
| (u32) (txq->nic + i * |
| sizeof(struct ipw2100_bd)), |
| (u32) txq->drv[i].host_addr, |
| txq->drv[i].buf_length); |
| } |
| } |
| #endif |
| |
| switch (packet->type) { |
| case DATA: |
| if (txq->drv[txq->oldest].status.info.fields.txType != 0) |
| printk(KERN_WARNING DRV_NAME ": %s: Queue mismatch. " |
| "Expecting DATA TBD but pulled " |
| "something else: ids %d=%d.\n", |
| priv->net_dev->name, txq->oldest, packet->index); |
| |
| /* DATA packet; we have to unmap and free the SKB */ |
| for (i = 0; i < frag_num; i++) { |
| tbd = &txq->drv[(packet->index + 1 + i) % txq->entries]; |
| |
| IPW_DEBUG_TX("TX%d P=%08x L=%d\n", |
| (packet->index + 1 + i) % txq->entries, |
| tbd->host_addr, tbd->buf_length); |
| |
| pci_unmap_single(priv->pci_dev, |
| tbd->host_addr, |
| tbd->buf_length, PCI_DMA_TODEVICE); |
| } |
| |
| libipw_txb_free(packet->info.d_struct.txb); |
| packet->info.d_struct.txb = NULL; |
| |
| list_add_tail(element, &priv->tx_free_list); |
| INC_STAT(&priv->tx_free_stat); |
| |
| /* We have a free slot in the Tx queue, so wake up the |
| * transmit layer if it is stopped. */ |
| if (priv->status & STATUS_ASSOCIATED) |
| netif_wake_queue(priv->net_dev); |
| |
| /* A packet was processed by the hardware, so update the |
| * watchdog */ |
| priv->net_dev->trans_start = jiffies; |
| |
| break; |
| |
| case COMMAND: |
| if (txq->drv[txq->oldest].status.info.fields.txType != 1) |
| printk(KERN_WARNING DRV_NAME ": %s: Queue mismatch. " |
| "Expecting COMMAND TBD but pulled " |
| "something else: ids %d=%d.\n", |
| priv->net_dev->name, txq->oldest, packet->index); |
| |
| #ifdef CONFIG_IPW2100_DEBUG |
| if (packet->info.c_struct.cmd->host_command_reg < |
| ARRAY_SIZE(command_types)) |
| IPW_DEBUG_TX("Command '%s (%d)' processed: %d.\n", |
| command_types[packet->info.c_struct.cmd-> |
| host_command_reg], |
| packet->info.c_struct.cmd-> |
| host_command_reg, |
| packet->info.c_struct.cmd->cmd_status_reg); |
| #endif |
| |
| list_add_tail(element, &priv->msg_free_list); |
| INC_STAT(&priv->msg_free_stat); |
| break; |
| } |
| |
| /* advance oldest used TBD pointer to start of next entry */ |
| txq->oldest = (e + 1) % txq->entries; |
| /* increase available TBDs number */ |
| txq->available += descriptors_used; |
| SET_STAT(&priv->txq_stat, txq->available); |
| |
| IPW_DEBUG_TX("packet latency (send to process) %ld jiffies\n", |
| jiffies - packet->jiffy_start); |
| |
| return (!list_empty(&priv->fw_pend_list)); |
| } |
| |
| static inline void __ipw2100_tx_complete(struct ipw2100_priv *priv) |
| { |
| int i = 0; |
| |
| while (__ipw2100_tx_process(priv) && i < 200) |
| i++; |
| |
| if (i == 200) { |
| printk(KERN_WARNING DRV_NAME ": " |
| "%s: Driver is running slow (%d iters).\n", |
| priv->net_dev->name, i); |
| } |
| } |
| |
| static void ipw2100_tx_send_commands(struct ipw2100_priv *priv) |
| { |
| struct list_head *element; |
| struct ipw2100_tx_packet *packet; |
| struct ipw2100_bd_queue *txq = &priv->tx_queue; |
| struct ipw2100_bd *tbd; |
| int next = txq->next; |
| |
| while (!list_empty(&priv->msg_pend_list)) { |
| /* if there isn't enough space in TBD queue, then |
| * don't stuff a new one in. |
| * NOTE: 3 are needed as a command will take one, |
| * and there is a minimum of 2 that must be |
| * maintained between the r and w indexes |
| */ |
| if (txq->available <= 3) { |
| IPW_DEBUG_TX("no room in tx_queue\n"); |
| break; |
| } |
| |
| element = priv->msg_pend_list.next; |
| list_del(element); |
| DEC_STAT(&priv->msg_pend_stat); |
| |
| packet = list_entry(element, struct ipw2100_tx_packet, list); |
| |
| IPW_DEBUG_TX("using TBD at virt=%p, phys=%04X\n", |
| &txq->drv[txq->next], |
| (u32) (txq->nic + txq->next * |
| sizeof(struct ipw2100_bd))); |
| |
| packet->index = txq->next; |
| |
| tbd = &txq->drv[txq->next]; |
| |
| /* initialize TBD */ |
| tbd->host_addr = packet->info.c_struct.cmd_phys; |
| tbd->buf_length = sizeof(struct ipw2100_cmd_header); |
| /* not marking number of fragments causes problems |
| * with f/w debug version */ |
| tbd->num_fragments = 1; |
| tbd->status.info.field = |
| IPW_BD_STATUS_TX_FRAME_COMMAND | |
| IPW_BD_STATUS_TX_INTERRUPT_ENABLE; |
| |
| /* update TBD queue counters */ |
| txq->next++; |
| txq->next %= txq->entries; |
| txq->available--; |
| DEC_STAT(&priv->txq_stat); |
| |
| list_add_tail(element, &priv->fw_pend_list); |
| INC_STAT(&priv->fw_pend_stat); |
| } |
| |
| if (txq->next != next) { |
| /* kick off the DMA by notifying firmware the |
| * write index has moved; make sure TBD stores are sync'd */ |
| wmb(); |
| write_register(priv->net_dev, |
| IPW_MEM_HOST_SHARED_TX_QUEUE_WRITE_INDEX, |
| txq->next); |
| } |
| } |
| |
| /* |
| * ipw2100_tx_send_data |
| * |
| */ |
| static void ipw2100_tx_send_data(struct ipw2100_priv *priv) |
| { |
| struct list_head *element; |
| struct ipw2100_tx_packet *packet; |
| struct ipw2100_bd_queue *txq = &priv->tx_queue; |
| struct ipw2100_bd *tbd; |
| int next = txq->next; |
| int i = 0; |
| struct ipw2100_data_header *ipw_hdr; |
| struct libipw_hdr_3addr *hdr; |
| |
| while (!list_empty(&priv->tx_pend_list)) { |
| /* if there isn't enough space in TBD queue, then |
| * don't stuff a new one in. |
| * NOTE: 4 are needed as a data will take two, |
| * and there is a minimum of 2 that must be |
| * maintained between the r and w indexes |
| */ |
| element = priv->tx_pend_list.next; |
| packet = list_entry(element, struct ipw2100_tx_packet, list); |
| |
| if (unlikely(1 + packet->info.d_struct.txb->nr_frags > |
| IPW_MAX_BDS)) { |
| /* TODO: Support merging buffers if more than |
| * IPW_MAX_BDS are used */ |
| IPW_DEBUG_INFO("%s: Maximum BD threshold exceeded. " |
| "Increase fragmentation level.\n", |
| priv->net_dev->name); |
| } |
| |
| if (txq->available <= 3 + packet->info.d_struct.txb->nr_frags) { |
| IPW_DEBUG_TX("no room in tx_queue\n"); |
| break; |
| } |
| |
| list_del(element); |
| DEC_STAT(&priv->tx_pend_stat); |
| |
| tbd = &txq->drv[txq->next]; |
| |
| packet->index = txq->next; |
| |
| ipw_hdr = packet->info.d_struct.data; |
| hdr = (struct libipw_hdr_3addr *)packet->info.d_struct.txb-> |
| fragments[0]->data; |
| |
| if (priv->ieee->iw_mode == IW_MODE_INFRA) { |
| /* To DS: Addr1 = BSSID, Addr2 = SA, |
| Addr3 = DA */ |
| memcpy(ipw_hdr->src_addr, hdr->addr2, ETH_ALEN); |
| memcpy(ipw_hdr->dst_addr, hdr->addr3, ETH_ALEN); |
| } else if (priv->ieee->iw_mode == IW_MODE_ADHOC) { |
| /* not From/To DS: Addr1 = DA, Addr2 = SA, |
| Addr3 = BSSID */ |
| memcpy(ipw_hdr->src_addr, hdr->addr2, ETH_ALEN); |
| memcpy(ipw_hdr->dst_addr, hdr->addr1, ETH_ALEN); |
| } |
| |
| ipw_hdr->host_command_reg = SEND; |
| ipw_hdr->host_command_reg1 = 0; |
| |
| /* For now we only support host based encryption */ |
| ipw_hdr->needs_encryption = 0; |
| ipw_hdr->encrypted = packet->info.d_struct.txb->encrypted; |
| if (packet->info.d_struct.txb->nr_frags > 1) |
| ipw_hdr->fragment_size = |
| packet->info.d_struct.txb->frag_size - |
| LIBIPW_3ADDR_LEN; |
| else |
| ipw_hdr->fragment_size = 0; |
| |
| tbd->host_addr = packet->info.d_struct.data_phys; |
| tbd->buf_length = sizeof(struct ipw2100_data_header); |
| tbd->num_fragments = 1 + packet->info.d_struct.txb->nr_frags; |
| tbd->status.info.field = |
| IPW_BD_STATUS_TX_FRAME_802_3 | |
| IPW_BD_STATUS_TX_FRAME_NOT_LAST_FRAGMENT; |
| txq->next++; |
| txq->next %= txq->entries; |
| |
| IPW_DEBUG_TX("data header tbd TX%d P=%08x L=%d\n", |
| packet->index, tbd->host_addr, tbd->buf_length); |
| #ifdef CONFIG_IPW2100_DEBUG |
| if (packet->info.d_struct.txb->nr_frags > 1) |
| IPW_DEBUG_FRAG("fragment Tx: %d frames\n", |
| packet->info.d_struct.txb->nr_frags); |
| #endif |
| |
| for (i = 0; i < packet->info.d_struct.txb->nr_frags; i++) { |
| tbd = &txq->drv[txq->next]; |
| if (i == packet->info.d_struct.txb->nr_frags - 1) |
| tbd->status.info.field = |
| IPW_BD_STATUS_TX_FRAME_802_3 | |
| IPW_BD_STATUS_TX_INTERRUPT_ENABLE; |
| else |
| tbd->status.info.field = |
| IPW_BD_STATUS_TX_FRAME_802_3 | |
| IPW_BD_STATUS_TX_FRAME_NOT_LAST_FRAGMENT; |
| |
| tbd->buf_length = packet->info.d_struct.txb-> |
| fragments[i]->len - LIBIPW_3ADDR_LEN; |
| |
| tbd->host_addr = pci_map_single(priv->pci_dev, |
| packet->info.d_struct. |
| txb->fragments[i]-> |
| data + |
| LIBIPW_3ADDR_LEN, |
| tbd->buf_length, |
| PCI_DMA_TODEVICE); |
| |
| IPW_DEBUG_TX("data frag tbd TX%d P=%08x L=%d\n", |
| txq->next, tbd->host_addr, |
| tbd->buf_length); |
| |
| pci_dma_sync_single_for_device(priv->pci_dev, |
| tbd->host_addr, |
| tbd->buf_length, |
| PCI_DMA_TODEVICE); |
| |
| txq->next++; |
| txq->next %= txq->entries; |
| } |
| |
| txq->available -= 1 + packet->info.d_struct.txb->nr_frags; |
| SET_STAT(&priv->txq_stat, txq->available); |
| |
| list_add_tail(element, &priv->fw_pend_list); |
| INC_STAT(&priv->fw_pend_stat); |
| } |
| |
| if (txq->next != next) { |
| /* kick off the DMA by notifying firmware the |
| * write index has moved; make sure TBD stores are sync'd */ |
| write_register(priv->net_dev, |
| IPW_MEM_HOST_SHARED_TX_QUEUE_WRITE_INDEX, |
| txq->next); |
| } |
| } |
| |
| static void ipw2100_irq_tasklet(struct ipw2100_priv *priv) |
| { |
| struct net_device *dev = priv->net_dev; |
| unsigned long flags; |
| u32 inta, tmp; |
| |
| spin_lock_irqsave(&priv->low_lock, flags); |
| ipw2100_disable_interrupts(priv); |
| |
| read_register(dev, IPW_REG_INTA, &inta); |
| |
| IPW_DEBUG_ISR("enter - INTA: 0x%08lX\n", |
| (unsigned long)inta & IPW_INTERRUPT_MASK); |
| |
| priv->in_isr++; |
| priv->interrupts++; |
| |
| /* We do not loop and keep polling for more interrupts as this |
| * is frowned upon and doesn't play nicely with other potentially |
| * chained IRQs */ |
| IPW_DEBUG_ISR("INTA: 0x%08lX\n", |
| (unsigned long)inta & IPW_INTERRUPT_MASK); |
| |
| if (inta & IPW2100_INTA_FATAL_ERROR) { |
| printk(KERN_WARNING DRV_NAME |
| ": Fatal interrupt. Scheduling firmware restart.\n"); |
| priv->inta_other++; |
| write_register(dev, IPW_REG_INTA, IPW2100_INTA_FATAL_ERROR); |
| |
| read_nic_dword(dev, IPW_NIC_FATAL_ERROR, &priv->fatal_error); |
| IPW_DEBUG_INFO("%s: Fatal error value: 0x%08X\n", |
| priv->net_dev->name, priv->fatal_error); |
| |
| read_nic_dword(dev, IPW_ERROR_ADDR(priv->fatal_error), &tmp); |
| IPW_DEBUG_INFO("%s: Fatal error address value: 0x%08X\n", |
| priv->net_dev->name, tmp); |
| |
| /* Wake up any sleeping jobs */ |
| schedule_reset(priv); |
| } |
| |
| if (inta & IPW2100_INTA_PARITY_ERROR) { |
| printk(KERN_ERR DRV_NAME |
| ": ***** PARITY ERROR INTERRUPT !!!!\n"); |
| priv->inta_other++; |
| write_register(dev, IPW_REG_INTA, IPW2100_INTA_PARITY_ERROR); |
| } |
| |
| if (inta & IPW2100_INTA_RX_TRANSFER) { |
| IPW_DEBUG_ISR("RX interrupt\n"); |
| |
| priv->rx_interrupts++; |
| |
| write_register(dev, IPW_REG_INTA, IPW2100_INTA_RX_TRANSFER); |
| |
| __ipw2100_rx_process(priv); |
| __ipw2100_tx_complete(priv); |
| } |
| |
| if (inta & IPW2100_INTA_TX_TRANSFER) { |
| IPW_DEBUG_ISR("TX interrupt\n"); |
| |
| priv->tx_interrupts++; |
| |
| write_register(dev, IPW_REG_INTA, IPW2100_INTA_TX_TRANSFER); |
| |
| __ipw2100_tx_complete(priv); |
| ipw2100_tx_send_commands(priv); |
| ipw2100_tx_send_data(priv); |
| } |
| |
| if (inta & IPW2100_INTA_TX_COMPLETE) { |
| IPW_DEBUG_ISR("TX complete\n"); |
| priv->inta_other++; |
| write_register(dev, IPW_REG_INTA, IPW2100_INTA_TX_COMPLETE); |
| |
| __ipw2100_tx_complete(priv); |
| } |
| |
| if (inta & IPW2100_INTA_EVENT_INTERRUPT) { |
| /* ipw2100_handle_event(dev); */ |
| priv->inta_other++; |
| write_register(dev, IPW_REG_INTA, IPW2100_INTA_EVENT_INTERRUPT); |
| } |
| |
| if (inta & IPW2100_INTA_FW_INIT_DONE) { |
| IPW_DEBUG_ISR("FW init done interrupt\n"); |
| priv->inta_other++; |
| |
| read_register(dev, IPW_REG_INTA, &tmp); |
| if (tmp & (IPW2100_INTA_FATAL_ERROR | |
| IPW2100_INTA_PARITY_ERROR)) { |
| write_register(dev, IPW_REG_INTA, |
| IPW2100_INTA_FATAL_ERROR | |
| IPW2100_INTA_PARITY_ERROR); |
| } |
| |
| write_register(dev, IPW_REG_INTA, IPW2100_INTA_FW_INIT_DONE); |
| } |
| |
| if (inta & IPW2100_INTA_STATUS_CHANGE) { |
| IPW_DEBUG_ISR("Status change interrupt\n"); |
| priv->inta_other++; |
| write_register(dev, IPW_REG_INTA, IPW2100_INTA_STATUS_CHANGE); |
| } |
| |
| if (inta & IPW2100_INTA_SLAVE_MODE_HOST_COMMAND_DONE) { |
| IPW_DEBUG_ISR("slave host mode interrupt\n"); |
| priv->inta_other++; |
| write_register(dev, IPW_REG_INTA, |
| IPW2100_INTA_SLAVE_MODE_HOST_COMMAND_DONE); |
| } |
| |
| priv->in_isr--; |
| ipw2100_enable_interrupts(priv); |
| |
| spin_unlock_irqrestore(&priv->low_lock, flags); |
| |
| IPW_DEBUG_ISR("exit\n"); |
| } |
| |
| static irqreturn_t ipw2100_interrupt(int irq, void *data) |
| { |
| struct ipw2100_priv *priv = data; |
| u32 inta, inta_mask; |
| |
| if (!data) |
| return IRQ_NONE; |
| |
| spin_lock(&priv->low_lock); |
| |
| /* We check to see if we should be ignoring interrupts before |
| * we touch the hardware. During ucode load if we try and handle |
| * an interrupt we can cause keyboard problems as well as cause |
| * the ucode to fail to initialize */ |
| if (!(priv->status & STATUS_INT_ENABLED)) { |
| /* Shared IRQ */ |
| goto none; |
| } |
| |
| read_register(priv->net_dev, IPW_REG_INTA_MASK, &inta_mask); |
| read_register(priv->net_dev, IPW_REG_INTA, &inta); |
| |
| if (inta == 0xFFFFFFFF) { |
| /* Hardware disappeared */ |
| printk(KERN_WARNING DRV_NAME ": IRQ INTA == 0xFFFFFFFF\n"); |
| goto none; |
| } |
| |
| inta &= IPW_INTERRUPT_MASK; |
| |
| if (!(inta & inta_mask)) { |
| /* Shared interrupt */ |
| goto none; |
| } |
| |
| /* We disable the hardware interrupt here just to prevent unneeded |
| * calls to be made. We disable this again within the actual |
| * work tasklet, so if another part of the code re-enables the |
| * interrupt, that is fine */ |
| ipw2100_disable_interrupts(priv); |
| |
| tasklet_schedule(&priv->irq_tasklet); |
| spin_unlock(&priv->low_lock); |
| |
| return IRQ_HANDLED; |
| none: |
| spin_unlock(&priv->low_lock); |
| return IRQ_NONE; |
| } |
| |
| static netdev_tx_t ipw2100_tx(struct libipw_txb *txb, |
| struct net_device *dev, int pri) |
| { |
| struct ipw2100_priv *priv = libipw_priv(dev); |
| struct list_head *element; |
| struct ipw2100_tx_packet *packet; |
| unsigned long flags; |
| |
| spin_lock_irqsave(&priv->low_lock, flags); |
| |
| if (!(priv->status & STATUS_ASSOCIATED)) { |
| IPW_DEBUG_INFO("Can not transmit when not connected.\n"); |
| priv->net_dev->stats.tx_carrier_errors++; |
| netif_stop_queue(dev); |
| goto fail_unlock; |
| } |
| |
| if (list_empty(&priv->tx_free_list)) |
| goto fail_unlock; |
| |
| element = priv->tx_free_list.next; |
| packet = list_entry(element, struct ipw2100_tx_packet, list); |
| |
| packet->info.d_struct.txb = txb; |
| |
| IPW_DEBUG_TX("Sending fragment (%d bytes):\n", txb->fragments[0]->len); |
| printk_buf(IPW_DL_TX, txb->fragments[0]->data, txb->fragments[0]->len); |
| |
| packet->jiffy_start = jiffies; |
| |
| list_del(element); |
| DEC_STAT(&priv->tx_free_stat); |
| |
| list_add_tail(element, &priv->tx_pend_list); |
| INC_STAT(&priv->tx_pend_stat); |
| |
| ipw2100_tx_send_data(priv); |
| |
| spin_unlock_irqrestore(&priv->low_lock, flags); |
| return NETDEV_TX_OK; |
| |
| fail_unlock: |
| netif_stop_queue(dev); |
| spin_unlock_irqrestore(&priv->low_lock, flags); |
| return NETDEV_TX_BUSY; |
| } |
| |
| static int ipw2100_msg_allocate(struct ipw2100_priv *priv) |
| { |
| int i, j, err = -EINVAL; |
| void *v; |
| dma_addr_t p; |
| |
| priv->msg_buffers = |
| kmalloc(IPW_COMMAND_POOL_SIZE * sizeof(struct ipw2100_tx_packet), |
| GFP_KERNEL); |
| if (!priv->msg_buffers) { |
| printk(KERN_ERR DRV_NAME ": %s: PCI alloc failed for msg " |
| "buffers.\n", priv->net_dev->name); |
| return -ENOMEM; |
| } |
| |
| for (i = 0; i < IPW_COMMAND_POOL_SIZE; i++) { |
| v = pci_alloc_consistent(priv->pci_dev, |
| sizeof(struct ipw2100_cmd_header), &p); |
| if (!v) { |
| printk(KERN_ERR DRV_NAME ": " |
| "%s: PCI alloc failed for msg " |
| "buffers.\n", priv->net_dev->name); |
| err = -ENOMEM; |
| break; |
| } |
| |
| memset(v, 0, sizeof(struct ipw2100_cmd_header)); |
| |
| priv->msg_buffers[i].type = COMMAND; |
| priv->msg_buffers[i].info.c_struct.cmd = |
| (struct ipw2100_cmd_header *)v; |
| priv->msg_buffers[i].info.c_struct.cmd_phys = p; |
| } |
| |
| if (i == IPW_COMMAND_POOL_SIZE) |
| return 0; |
| |
| for (j = 0; j < i; j++) { |
| pci_free_consistent(priv->pci_dev, |
| sizeof(struct ipw2100_cmd_header), |
| priv->msg_buffers[j].info.c_struct.cmd, |
| priv->msg_buffers[j].info.c_struct. |
| cmd_phys); |
| } |
| |
| kfree(priv->msg_buffers); |
| priv->msg_buffers = NULL; |
| |
| return err; |
| } |
| |
| static int ipw2100_msg_initialize(struct ipw2100_priv *priv) |
| { |
| int i; |
| |
| INIT_LIST_HEAD(&priv->msg_free_list); |
| INIT_LIST_HEAD(&priv->msg_pend_list); |
| |
| for (i = 0; i < IPW_COMMAND_POOL_SIZE; i++) |
| list_add_tail(&priv->msg_buffers[i].list, &priv->msg_free_list); |
| SET_STAT(&priv->msg_free_stat, i); |
| |
| return 0; |
| } |
| |
| static void ipw2100_msg_free(struct ipw2100_priv *priv) |
| { |
| int i; |
| |
| if (!priv->msg_buffers) |
| return; |
| |
| for (i = 0; i < IPW_COMMAND_POOL_SIZE; i++) { |
| pci_free_consistent(priv->pci_dev, |
| sizeof(struct ipw2100_cmd_header), |
| priv->msg_buffers[i].info.c_struct.cmd, |
| priv->msg_buffers[i].info.c_struct. |
| cmd_phys); |
| } |
| |
| kfree(priv->msg_buffers); |
| priv->msg_buffers = NULL; |
| } |
| |
| static ssize_t show_pci(struct device *d, struct device_attribute *attr, |
| char *buf) |
| { |
| struct pci_dev *pci_dev = container_of(d, struct pci_dev, dev); |
| char *out = buf; |
| int i, j; |
| u32 val; |
| |
| for (i = 0; i < 16; i++) { |
| out += sprintf(out, "[%08X] ", i * 16); |
| for (j = 0; j < 16; j += 4) { |
| pci_read_config_dword(pci_dev, i * 16 + j, &val); |
| out += sprintf(out, "%08X ", val); |
| } |
| out += sprintf(out, "\n"); |
| } |
| |
| return out - buf; |
| } |
| |
| static DEVICE_ATTR(pci, S_IRUGO, show_pci, NULL); |
| |
| static ssize_t show_cfg(struct device *d, struct device_attribute *attr, |
| char *buf) |
| { |
| struct ipw2100_priv *p = dev_get_drvdata(d); |
| return sprintf(buf, "0x%08x\n", (int)p->config); |
| } |
| |
| static DEVICE_ATTR(cfg, S_IRUGO, show_cfg, NULL); |
| |
| static ssize_t show_status(struct device *d, struct device_attribute *attr, |
| char *buf) |
| { |
| struct ipw2100_priv *p = dev_get_drvdata(d); |
| return sprintf(buf, "0x%08x\n", (int)p->status); |
| } |
| |
| static DEVICE_ATTR(status, S_IRUGO, show_status, NULL); |
| |
| static ssize_t show_capability(struct device *d, struct device_attribute *attr, |
| char *buf) |
| { |
| struct ipw2100_priv *p = dev_get_drvdata(d); |
| return sprintf(buf, "0x%08x\n", (int)p->capability); |
| } |
| |
| static DEVICE_ATTR(capability, S_IRUGO, show_capability, NULL); |
| |
| #define IPW2100_REG(x) { IPW_ ##x, #x } |
| static const struct { |
| u32 addr; |
| const char *name; |
| } hw_data[] = { |
| IPW2100_REG(REG_GP_CNTRL), |
| IPW2100_REG(REG_GPIO), |
| IPW2100_REG(REG_INTA), |
| IPW2100_REG(REG_INTA_MASK), IPW2100_REG(REG_RESET_REG),}; |
| #define IPW2100_NIC(x, s) { x, #x, s } |
| static const struct { |
| u32 addr; |
| const char *name; |
| size_t size; |
| } nic_data[] = { |
| IPW2100_NIC(IPW2100_CONTROL_REG, 2), |
| IPW2100_NIC(0x210014, 1), IPW2100_NIC(0x210000, 1),}; |
| #define IPW2100_ORD(x, d) { IPW_ORD_ ##x, #x, d } |
| static const struct { |
| u8 index; |
| const char *name; |
| const char *desc; |
| } ord_data[] = { |
| IPW2100_ORD(STAT_TX_HOST_REQUESTS, "requested Host Tx's (MSDU)"), |
| IPW2100_ORD(STAT_TX_HOST_COMPLETE, |
| "successful Host Tx's (MSDU)"), |
| IPW2100_ORD(STAT_TX_DIR_DATA, |
| "successful Directed Tx's (MSDU)"), |
| IPW2100_ORD(STAT_TX_DIR_DATA1, |
| "successful Directed Tx's (MSDU) @ 1MB"), |
| IPW2100_ORD(STAT_TX_DIR_DATA2, |
| "successful Directed Tx's (MSDU) @ 2MB"), |
| IPW2100_ORD(STAT_TX_DIR_DATA5_5, |
| "successful Directed Tx's (MSDU) @ 5_5MB"), |
| IPW2100_ORD(STAT_TX_DIR_DATA11, |
| "successful Directed Tx's (MSDU) @ 11MB"), |
| IPW2100_ORD(STAT_TX_NODIR_DATA1, |
| "successful Non_Directed Tx's (MSDU) @ 1MB"), |
| IPW2100_ORD(STAT_TX_NODIR_DATA2, |
| "successful Non_Directed Tx's (MSDU) @ 2MB"), |
| IPW2100_ORD(STAT_TX_NODIR_DATA5_5, |
| "successful Non_Directed Tx's (MSDU) @ 5.5MB"), |
| IPW2100_ORD(STAT_TX_NODIR_DATA11, |
| "successful Non_Directed Tx's (MSDU) @ 11MB"), |
| IPW2100_ORD(STAT_NULL_DATA, "successful NULL data Tx's"), |
| IPW2100_ORD(STAT_TX_RTS, "successful Tx RTS"), |
| IPW2100_ORD(STAT_TX_CTS, "successful Tx CTS"), |
| IPW2100_ORD(STAT_TX_ACK, "successful Tx ACK"), |
| IPW2100_ORD(STAT_TX_ASSN, "successful Association Tx's"), |
| IPW2100_ORD(STAT_TX_ASSN_RESP, |
| "successful Association response Tx's"), |
| IPW2100_ORD(STAT_TX_REASSN, |
| "successful Reassociation Tx's"), |
| IPW2100_ORD(STAT_TX_REASSN_RESP, |
| "successful Reassociation response Tx's"), |
| IPW2100_ORD(STAT_TX_PROBE, |
| "probes successfully transmitted"), |
| IPW2100_ORD(STAT_TX_PROBE_RESP, |
| "probe responses successfully transmitted"), |
| IPW2100_ORD(STAT_TX_BEACON, "tx beacon"), |
| IPW2100_ORD(STAT_TX_ATIM, "Tx ATIM"), |
| IPW2100_ORD(STAT_TX_DISASSN, |
| "successful Disassociation TX"), |
| IPW2100_ORD(STAT_TX_AUTH, "successful Authentication Tx"), |
| IPW2100_ORD(STAT_TX_DEAUTH, |
| "successful Deauthentication TX"), |
| IPW2100_ORD(STAT_TX_TOTAL_BYTES, |
| "Total successful Tx data bytes"), |
| IPW2100_ORD(STAT_TX_RETRIES, "Tx retries"), |
| IPW2100_ORD(STAT_TX_RETRY1, "Tx retries at 1MBPS"), |
| IPW2100_ORD(STAT_TX_RETRY2, "Tx retries at 2MBPS"), |
| IPW2100_ORD(STAT_TX_RETRY5_5, "Tx retries at 5.5MBPS"), |
| IPW2100_ORD(STAT_TX_RETRY11, "Tx retries at 11MBPS"), |
| IPW2100_ORD(STAT_TX_FAILURES, "Tx Failures"), |
| IPW2100_ORD(STAT_TX_MAX_TRIES_IN_HOP, |
| "times max tries in a hop failed"), |
| IPW2100_ORD(STAT_TX_DISASSN_FAIL, |
| "times disassociation failed"), |
| IPW2100_ORD(STAT_TX_ERR_CTS, "missed/bad CTS frames"), |
| IPW2100_ORD(STAT_TX_ERR_ACK, "tx err due to acks"), |
| IPW2100_ORD(STAT_RX_HOST, "packets passed to host"), |
| IPW2100_ORD(STAT_RX_DIR_DATA, "directed packets"), |
| IPW2100_ORD(STAT_RX_DIR_DATA1, "directed packets at 1MB"), |
| IPW2100_ORD(STAT_RX_DIR_DATA2, "directed packets at 2MB"), |
| IPW2100_ORD(STAT_RX_DIR_DATA5_5, |
| "directed packets at 5.5MB"), |
| IPW2100_ORD(STAT_RX_DIR_DATA11, "directed packets at 11MB"), |
| IPW2100_ORD(STAT_RX_NODIR_DATA, "nondirected packets"), |
| IPW2100_ORD(STAT_RX_NODIR_DATA1, |
| "nondirected packets at 1MB"), |
| IPW2100_ORD(STAT_RX_NODIR_DATA2, |
| "nondirected packets at 2MB"), |
| IPW2100_ORD(STAT_RX_NODIR_DATA5_5, |
| "nondirected packets at 5.5MB"), |
| IPW2100_ORD(STAT_RX_NODIR_DATA11, |
| "nondirected packets at 11MB"), |
| IPW2100_ORD(STAT_RX_NULL_DATA, "null data rx's"), |
| IPW2100_ORD(STAT_RX_RTS, "Rx RTS"), IPW2100_ORD(STAT_RX_CTS, |
| "Rx CTS"), |
| IPW2100_ORD(STAT_RX_ACK, "Rx ACK"), |
| IPW2100_ORD(STAT_RX_CFEND, "Rx CF End"), |
| IPW2100_ORD(STAT_RX_CFEND_ACK, "Rx CF End + CF Ack"), |
| IPW2100_ORD(STAT_RX_ASSN, "Association Rx's"), |
| IPW2100_ORD(STAT_RX_ASSN_RESP, "Association response Rx's"), |
| IPW2100_ORD(STAT_RX_REASSN, "Reassociation Rx's"), |
| IPW2100_ORD(STAT_RX_REASSN_RESP, |
| "Reassociation response Rx's"), |
| IPW2100_ORD(STAT_RX_PROBE, "probe Rx's"), |
| IPW2100_ORD(STAT_RX_PROBE_RESP, "probe response Rx's"), |
| IPW2100_ORD(STAT_RX_BEACON, "Rx beacon"), |
| IPW2100_ORD(STAT_RX_ATIM, "Rx ATIM"), |
| IPW2100_ORD(STAT_RX_DISASSN, "disassociation Rx"), |
| IPW2100_ORD(STAT_RX_AUTH, "authentication Rx"), |
| IPW2100_ORD(STAT_RX_DEAUTH, "deauthentication Rx"), |
| IPW2100_ORD(STAT_RX_TOTAL_BYTES, |
| "Total rx data bytes received"), |
| IPW2100_ORD(STAT_RX_ERR_CRC, "packets with Rx CRC error"), |
| IPW2100_ORD(STAT_RX_ERR_CRC1, "Rx CRC errors at 1MB"), |
| IPW2100_ORD(STAT_RX_ERR_CRC2, "Rx CRC errors at 2MB"), |
| IPW2100_ORD(STAT_RX_ERR_CRC5_5, "Rx CRC errors at 5.5MB"), |
| IPW2100_ORD(STAT_RX_ERR_CRC11, "Rx CRC errors at 11MB"), |
| IPW2100_ORD(STAT_RX_DUPLICATE1, |
| "duplicate rx packets at 1MB"), |
| IPW2100_ORD(STAT_RX_DUPLICATE2, |
| "duplicate rx packets at 2MB"), |
| IPW2100_ORD(STAT_RX_DUPLICATE5_5, |
| "duplicate rx packets at 5.5MB"), |
| IPW2100_ORD(STAT_RX_DUPLICATE11, |
| "duplicate rx packets at 11MB"), |
| IPW2100_ORD(STAT_RX_DUPLICATE, "duplicate rx packets"), |
| IPW2100_ORD(PERS_DB_LOCK, "locking fw permanent db"), |
| IPW2100_ORD(PERS_DB_SIZE, "size of fw permanent db"), |
| IPW2100_ORD(PERS_DB_ADDR, "address of fw permanent db"), |
| IPW2100_ORD(STAT_RX_INVALID_PROTOCOL, |
| "rx frames with invalid protocol"), |
| IPW2100_ORD(SYS_BOOT_TIME, "Boot time"), |
| IPW2100_ORD(STAT_RX_NO_BUFFER, |
| "rx frames rejected due to no buffer"), |
| IPW2100_ORD(STAT_RX_MISSING_FRAG, |
| "rx frames dropped due to missing fragment"), |
| IPW2100_ORD(STAT_RX_ORPHAN_FRAG, |
| "rx frames dropped due to non-sequential fragment"), |
| IPW2100_ORD(STAT_RX_ORPHAN_FRAME, |
| "rx frames dropped due to unmatched 1st frame"), |
| IPW2100_ORD(STAT_RX_FRAG_AGEOUT, |
| "rx frames dropped due to uncompleted frame"), |
| IPW2100_ORD(STAT_RX_ICV_ERRORS, |
| "ICV errors during decryption"), |
| IPW2100_ORD(STAT_PSP_SUSPENSION, "times adapter suspended"), |
| IPW2100_ORD(STAT_PSP_BCN_TIMEOUT, "beacon timeout"), |
| IPW2100_ORD(STAT_PSP_POLL_TIMEOUT, |
| "poll response timeouts"), |
| IPW2100_ORD(STAT_PSP_NONDIR_TIMEOUT, |
| "timeouts waiting for last {broad,multi}cast pkt"), |
| IPW2100_ORD(STAT_PSP_RX_DTIMS, "PSP DTIMs received"), |
| IPW2100_ORD(STAT_PSP_RX_TIMS, "PSP TIMs received"), |
| IPW2100_ORD(STAT_PSP_STATION_ID, "PSP Station ID"), |
| IPW2100_ORD(LAST_ASSN_TIME, "RTC time of last association"), |
| IPW2100_ORD(STAT_PERCENT_MISSED_BCNS, |
| "current calculation of % missed beacons"), |
| IPW2100_ORD(STAT_PERCENT_RETRIES, |
| "current calculation of % missed tx retries"), |
| IPW2100_ORD(ASSOCIATED_AP_PTR, |
| "0 if not associated, else pointer to AP table entry"), |
| IPW2100_ORD(AVAILABLE_AP_CNT, |
| "AP's decsribed in the AP table"), |
| IPW2100_ORD(AP_LIST_PTR, "Ptr to list of available APs"), |
| IPW2100_ORD(STAT_AP_ASSNS, "associations"), |
| IPW2100_ORD(STAT_ASSN_FAIL, "association failures"), |
| IPW2100_ORD(STAT_ASSN_RESP_FAIL, |
| "failures due to response fail"), |
| IPW2100_ORD(STAT_FULL_SCANS, "full scans"), |
| IPW2100_ORD(CARD_DISABLED, "Card Disabled"), |
| IPW2100_ORD(STAT_ROAM_INHIBIT, |
| "times roaming was inhibited due to activity"), |
| IPW2100_ORD(RSSI_AT_ASSN, |
| "RSSI of associated AP at time of association"), |
| IPW2100_ORD(STAT_ASSN_CAUSE1, |
| "reassociation: no probe response or TX on hop"), |
| IPW2100_ORD(STAT_ASSN_CAUSE2, |
| "reassociation: poor tx/rx quality"), |
| IPW2100_ORD(STAT_ASSN_CAUSE3, |
| "reassociation: tx/rx quality (excessive AP load"), |
| IPW2100_ORD(STAT_ASSN_CAUSE4, |
| "reassociation: AP RSSI level"), |
| IPW2100_ORD(STAT_ASSN_CAUSE5, |
| "reassociations due to load leveling"), |
| IPW2100_ORD(STAT_AUTH_FAIL, "times authentication failed"), |
| IPW2100_ORD(STAT_AUTH_RESP_FAIL, |
| "times authentication response failed"), |
| IPW2100_ORD(STATION_TABLE_CNT, |
| "entries in association table"), |
| IPW2100_ORD(RSSI_AVG_CURR, "Current avg RSSI"), |
| IPW2100_ORD(POWER_MGMT_MODE, "Power mode - 0=CAM, 1=PSP"), |
| IPW2100_ORD(COUNTRY_CODE, |
| "IEEE country code as recv'd from beacon"), |
| IPW2100_ORD(COUNTRY_CHANNELS, |
| "channels suported by country"), |
| IPW2100_ORD(RESET_CNT, "adapter resets (warm)"), |
| IPW2100_ORD(BEACON_INTERVAL, "Beacon interval"), |
| IPW2100_ORD(ANTENNA_DIVERSITY, |
| "TRUE if antenna diversity is disabled"), |
| IPW2100_ORD(DTIM_PERIOD, "beacon intervals between DTIMs"), |
| IPW2100_ORD(OUR_FREQ, |
| "current radio freq lower digits - channel ID"), |
| IPW2100_ORD(RTC_TIME, "current RTC time"), |
| IPW2100_ORD(PORT_TYPE, "operating mode"), |
| IPW2100_ORD(CURRENT_TX_RATE, "current tx rate"), |
| IPW2100_ORD(SUPPORTED_RATES, "supported tx rates"), |
| IPW2100_ORD(ATIM_WINDOW, "current ATIM Window"), |
| IPW2100_ORD(BASIC_RATES, "basic tx rates"), |
| IPW2100_ORD(NIC_HIGHEST_RATE, "NIC highest tx rate"), |
| IPW2100_ORD(AP_HIGHEST_RATE, "AP highest tx rate"), |
| IPW2100_ORD(CAPABILITIES, |
| "Management frame capability field"), |
| IPW2100_ORD(AUTH_TYPE, "Type of authentication"), |
| IPW2100_ORD(RADIO_TYPE, "Adapter card platform type"), |
| IPW2100_ORD(RTS_THRESHOLD, |
| "Min packet length for RTS handshaking"), |
| IPW2100_ORD(INT_MODE, "International mode"), |
| IPW2100_ORD(FRAGMENTATION_THRESHOLD, |
| "protocol frag threshold"), |
| IPW2100_ORD(EEPROM_SRAM_DB_BLOCK_START_ADDRESS, |
| "EEPROM offset in SRAM"), |
| IPW2100_ORD(EEPROM_SRAM_DB_BLOCK_SIZE, |
| "EEPROM size in SRAM"), |
| IPW2100_ORD(EEPROM_SKU_CAPABILITY, "EEPROM SKU Capability"), |
| IPW2100_ORD(EEPROM_IBSS_11B_CHANNELS, |
| "EEPROM IBSS 11b channel set"), |
| IPW2100_ORD(MAC_VERSION, "MAC Version"), |
| IPW2100_ORD(MAC_REVISION, "MAC Revision"), |
| IPW2100_ORD(RADIO_VERSION, "Radio Version"), |
| IPW2100_ORD(NIC_MANF_DATE_TIME, "MANF Date/Time STAMP"), |
| IPW2100_ORD(UCODE_VERSION, "Ucode Version"),}; |
| |
| static ssize_t show_registers(struct device *d, struct device_attribute *attr, |
| char *buf) |
| { |
| int i; |
| struct ipw2100_priv *priv = dev_get_drvdata(d); |
| struct net_device *dev = priv->net_dev; |
| char *out = buf; |
| u32 val = 0; |
| |
| out += sprintf(out, "%30s [Address ] : Hex\n", "Register"); |
| |
| for (i = 0; i < ARRAY_SIZE(hw_data); i++) { |
| read_register(dev, hw_data[i].addr, &val); |
| out += sprintf(out, "%30s [%08X] : %08X\n", |
| hw_data[i].name, hw_data[i].addr, val); |
| } |
| |
| return out - buf; |
| } |
| |
| static DEVICE_ATTR(registers, S_IRUGO, show_registers, NULL); |
| |
| static ssize_t show_hardware(struct device *d, struct device_attribute *attr, |
| char *buf) |
| { |
| struct ipw2100_priv *priv = dev_get_drvdata(d); |
| struct net_device *dev = priv->net_dev; |
| char *out = buf; |
| int i; |
| |
| out += sprintf(out, "%30s [Address ] : Hex\n", "NIC entry"); |
| |
| for (i = 0; i < ARRAY_SIZE(nic_data); i++) { |
| u8 tmp8; |
| u16 tmp16; |
| u32 tmp32; |
| |
| switch (nic_data[i].size) { |
| case 1: |
| read_nic_byte(dev, nic_data[i].addr, &tmp8); |
| out += sprintf(out, "%30s [%08X] : %02X\n", |
| nic_data[i].name, nic_data[i].addr, |
| tmp8); |
| break; |
| case 2: |
| read_nic_word(dev, nic_data[i].addr, &tmp16); |
| out += sprintf(out, "%30s [%08X] : %04X\n", |
| nic_data[i].name, nic_data[i].addr, |
| tmp16); |
| break; |
| case 4: |
| read_nic_dword(dev, nic_data[i].addr, &tmp32); |
| out += sprintf(out, "%30s [%08X] : %08X\n", |
| nic_data[i].name, nic_data[i].addr, |
| tmp32); |
| break; |
| } |
| } |
| return out - buf; |
| } |
| |
| static DEVICE_ATTR(hardware, S_IRUGO, show_hardware, NULL); |
| |
| static ssize_t show_memory(struct device *d, struct device_attribute *attr, |
| char *buf) |
| { |
| struct ipw2100_priv *priv = dev_get_drvdata(d); |
| struct net_device *dev = priv->net_dev; |
| static unsigned long loop = 0; |
| int len = 0; |
| u32 buffer[4]; |
| int i; |
| char line[81]; |
| |
| if (loop >= 0x30000) |
| loop = 0; |
| |
| /* sysfs provides us PAGE_SIZE buffer */ |
| while (len < PAGE_SIZE - 128 && loop < 0x30000) { |
| |
| if (priv->snapshot[0]) |
| for (i = 0; i < 4; i++) |
| buffer[i] = |
| *(u32 *) SNAPSHOT_ADDR(loop + i * 4); |
| else |
| for (i = 0; i < 4; i++) |
| read_nic_dword(dev, loop + i * 4, &buffer[i]); |
| |
| if (priv->dump_raw) |
| len += sprintf(buf + len, |
| "%c%c%c%c" |
| "%c%c%c%c" |
| "%c%c%c%c" |
| "%c%c%c%c", |
| ((u8 *) buffer)[0x0], |
| ((u8 *) buffer)[0x1], |
| ((u8 *) buffer)[0x2], |
| ((u8 *) buffer)[0x3], |
| ((u8 *) buffer)[0x4], |
| ((u8 *) buffer)[0x5], |
| ((u8 *) buffer)[0x6], |
| ((u8 *) buffer)[0x7], |
| ((u8 *) buffer)[0x8], |
| ((u8 *) buffer)[0x9], |
| ((u8 *) buffer)[0xa], |
| ((u8 *) buffer)[0xb], |
| ((u8 *) buffer)[0xc], |
| ((u8 *) buffer)[0xd], |
| ((u8 *) buffer)[0xe], |
| ((u8 *) buffer)[0xf]); |
| else |
| len += sprintf(buf + len, "%s\n", |
| snprint_line(line, sizeof(line), |
| (u8 *) buffer, 16, loop)); |
| loop += 16; |
| } |
| |
| return len; |
| } |
| |
| static ssize_t store_memory(struct device *d, struct device_attribute *attr, |
| const char *buf, size_t count) |
| { |
| struct ipw2100_priv *priv = dev_get_drvdata(d); |
| struct net_device *dev = priv->net_dev; |
| const char *p = buf; |
| |
| (void)dev; /* kill unused-var warning for debug-only code */ |
| |
| if (count < 1) |
| return count; |
| |
| if (p[0] == '1' || |
| (count >= 2 && tolower(p[0]) == 'o' && tolower(p[1]) == 'n')) { |
| IPW_DEBUG_INFO("%s: Setting memory dump to RAW mode.\n", |
| dev->name); |
| priv->dump_raw = 1; |
| |
| } else if (p[0] == '0' || (count >= 2 && tolower(p[0]) == 'o' && |
| tolower(p[1]) == 'f')) { |
| IPW_DEBUG_INFO("%s: Setting memory dump to HEX mode.\n", |
| dev->name); |
| priv->dump_raw = 0; |
| |
| } else if (tolower(p[0]) == 'r') { |
| IPW_DEBUG_INFO("%s: Resetting firmware snapshot.\n", dev->name); |
| ipw2100_snapshot_free(priv); |
| |
| } else |
| IPW_DEBUG_INFO("%s: Usage: 0|on = HEX, 1|off = RAW, " |
| "reset = clear memory snapshot\n", dev->name); |
| |
| return count; |
| } |
| |
| static DEVICE_ATTR(memory, S_IWUSR | S_IRUGO, show_memory, store_memory); |
| |
| static ssize_t show_ordinals(struct device *d, struct device_attribute *attr, |
| char *buf) |
| { |
| struct ipw2100_priv *priv = dev_get_drvdata(d); |
| u32 val = 0; |
| int len = 0; |
| u32 val_len; |
| static int loop = 0; |
| |
| if (priv->status & STATUS_RF_KILL_MASK) |
| return 0; |
| |
| if (loop >= ARRAY_SIZE(ord_data)) |
| loop = 0; |
| |
| /* sysfs provides us PAGE_SIZE buffer */ |
| while (len < PAGE_SIZE - 128 && loop < ARRAY_SIZE(ord_data)) { |
| val_len = sizeof(u32); |
| |
| if (ipw2100_get_ordinal(priv, ord_data[loop].index, &val, |
| &val_len)) |
| len += sprintf(buf + len, "[0x%02X] = ERROR %s\n", |
| ord_data[loop].index, |
| ord_data[loop].desc); |
| else |
| len += sprintf(buf + len, "[0x%02X] = 0x%08X %s\n", |
| ord_data[loop].index, val, |
| ord_data[loop].desc); |
| loop++; |
| } |
| |
| return len; |
| } |
| |
| static DEVICE_ATTR(ordinals, S_IRUGO, show_ordinals, NULL); |
| |
| static ssize_t show_stats(struct device *d, struct device_attribute *attr, |
| char *buf) |
| { |
| struct ipw2100_priv *priv = dev_get_drvdata(d); |
| char *out = buf; |
| |
| out += sprintf(out, "interrupts: %d {tx: %d, rx: %d, other: %d}\n", |
| priv->interrupts, priv->tx_interrupts, |
| priv->rx_interrupts, priv->inta_other); |
| out += sprintf(out, "firmware resets: %d\n", priv->resets); |
| out += sprintf(out, "firmware hangs: %d\n", priv->hangs); |
| #ifdef CONFIG_IPW2100_DEBUG |
| out += sprintf(out, "packet mismatch image: %s\n", |
| priv->snapshot[0] ? "YES" : "NO"); |
| #endif |
| |
| return out - buf; |
| } |
| |
| static DEVICE_ATTR(stats, S_IRUGO, show_stats, NULL); |
| |
| static int ipw2100_switch_mode(struct ipw2100_priv *priv, u32 mode) |
| { |
| int err; |
| |
| if (mode == priv->ieee->iw_mode) |
| return 0; |
| |
| err = ipw2100_disable_adapter(priv); |
| if (err) { |
| printk(KERN_ERR DRV_NAME ": %s: Could not disable adapter %d\n", |
| priv->net_dev->name, err); |
| return err; |
| } |
| |
| switch (mode) { |
| case IW_MODE_INFRA: |
| priv->net_dev->type = ARPHRD_ETHER; |
| break; |
| case IW_MODE_ADHOC: |
| priv->net_dev->type = ARPHRD_ETHER; |
| break; |
| #ifdef CONFIG_IPW2100_MONITOR |
| case IW_MODE_MONITOR: |
| priv->last_mode = priv->ieee->iw_mode; |
| priv->net_dev->type = ARPHRD_IEEE80211_RADIOTAP; |
| break; |
| #endif /* CONFIG_IPW2100_MONITOR */ |
| } |
| |
| priv->ieee->iw_mode = mode; |
| |
| #ifdef CONFIG_PM |
| /* Indicate ipw2100_download_firmware download firmware |
| * from disk instead of memory. */ |
| ipw2100_firmware.version = 0; |
| #endif |
| |
| printk(KERN_INFO "%s: Reseting on mode change.\n", priv->net_dev->name); |
| priv->reset_backoff = 0; |
| schedule_reset(priv); |
| |
| return 0; |
| } |
| |
| static ssize_t show_internals(struct device *d, struct device_attribute *attr, |
| char *buf) |
| { |
| struct ipw2100_priv *priv = dev_get_drvdata(d); |
| int len = 0; |
| |
| #define DUMP_VAR(x,y) len += sprintf(buf + len, # x ": %" y "\n", priv-> x) |
| |
| if (priv->status & STATUS_ASSOCIATED) |
| len += sprintf(buf + len, "connected: %lu\n", |
| get_seconds() - priv->connect_start); |
| else |
| len += sprintf(buf + len, "not connected\n"); |
| |
| DUMP_VAR(ieee->crypt_info.crypt[priv->ieee->crypt_info.tx_keyidx], "p"); |
| DUMP_VAR(status, "08lx"); |
| DUMP_VAR(config, "08lx"); |
| DUMP_VAR(capability, "08lx"); |
| |
| len += |
| sprintf(buf + len, "last_rtc: %lu\n", |
| (unsigned long)priv->last_rtc); |
| |
| DUMP_VAR(fatal_error, "d"); |
| DUMP_VAR(stop_hang_check, "d"); |
| DUMP_VAR(stop_rf_kill, "d"); |
| DUMP_VAR(messages_sent, "d"); |
| |
| DUMP_VAR(tx_pend_stat.value, "d"); |
| DUMP_VAR(tx_pend_stat.hi, "d"); |
| |
| DUMP_VAR(tx_free_stat.value, "d"); |
| DUMP_VAR(tx_free_stat.lo, "d"); |
| |
| DUMP_VAR(msg_free_stat.value, "d"); |
| DUMP_VAR(msg_free_stat.lo, "d"); |
| |
| DUMP_VAR(msg_pend_stat.value, "d"); |
| DUMP_VAR(msg_pend_stat.hi, "d"); |
| |
| DUMP_VAR(fw_pend_stat.value, "d"); |
| DUMP_VAR(fw_pend_stat.hi, "d"); |
| |
| DUMP_VAR(txq_stat.value, "d"); |
| DUMP_VAR(txq_stat.lo, "d"); |
| |
| DUMP_VAR(ieee->scans, "d"); |
| DUMP_VAR(reset_backoff, "d"); |
| |
| return len; |
| } |
| |
| static DEVICE_ATTR(internals, S_IRUGO, show_internals, NULL); |
| |
| static ssize_t show_bssinfo(struct device *d, struct device_attribute *attr, |
| char *buf) |
| { |
| struct ipw2100_priv *priv = dev_get_drvdata(d); |
| char essid[IW_ESSID_MAX_SIZE + 1]; |
| u8 bssid[ETH_ALEN]; |
| u32 chan = 0; |
| char *out = buf; |
| unsigned int length; |
| int ret; |
| |
| if (priv->status & STATUS_RF_KILL_MASK) |
| return 0; |
| |
| memset(essid, 0, sizeof(essid)); |
| memset(bssid, 0, sizeof(bssid)); |
| |
| length = IW_ESSID_MAX_SIZE; |
| ret = ipw2100_get_ordinal(priv, IPW_ORD_STAT_ASSN_SSID, essid, &length); |
| if (ret) |
| IPW_DEBUG_INFO("failed querying ordinals at line %d\n", |
| __LINE__); |
| |
| length = sizeof(bssid); |
| ret = ipw2100_get_ordinal(priv, IPW_ORD_STAT_ASSN_AP_BSSID, |
| bssid, &length); |
| if (ret) |
| IPW_DEBUG_INFO("failed querying ordinals at line %d\n", |
| __LINE__); |
| |
| length = sizeof(u32); |
| ret = ipw2100_get_ordinal(priv, IPW_ORD_OUR_FREQ, &chan, &length); |
| if (ret) |
| IPW_DEBUG_INFO("failed querying ordinals at line %d\n", |
| __LINE__); |
| |
| out += sprintf(out, "ESSID: %s\n", essid); |
| out += sprintf(out, "BSSID: %pM\n", bssid); |
| out += sprintf(out, "Channel: %d\n", chan); |
| |
| return out - buf; |
| } |
| |
| static DEVICE_ATTR(bssinfo, S_IRUGO, show_bssinfo, NULL); |
| |
| #ifdef CONFIG_IPW2100_DEBUG |
| static ssize_t show_debug_level(struct device_driver *d, char *buf) |
| { |
| return sprintf(buf, "0x%08X\n", ipw2100_debug_level); |
| } |
| |
| static ssize_t store_debug_level(struct device_driver *d, |
| const char *buf, size_t count) |
| { |
| char *p = (char *)buf; |
| u32 val; |
| |
| if (p[1] == 'x' || p[1] == 'X' || p[0] == 'x' || p[0] == 'X') { |
| p++; |
| if (p[0] == 'x' || p[0] == 'X') |
| p++; |
| val = simple_strtoul(p, &p, 16); |
| } else |
| val = simple_strtoul(p, &p, 10); |
| if (p == buf) |
| IPW_DEBUG_INFO(": %s is not in hex or decimal form.\n", buf); |
| else |
| ipw2100_debug_level = val; |
| |
| return strnlen(buf, count); |
| } |
| |
| static DRIVER_ATTR(debug_level, S_IWUSR | S_IRUGO, show_debug_level, |
| store_debug_level); |
| #endif /* CONFIG_IPW2100_DEBUG */ |
| |
| static ssize_t show_fatal_error(struct device *d, |
| struct device_attribute *attr, char *buf) |
| { |
| struct ipw2100_priv *priv = dev_get_drvdata(d); |
| char *out = buf; |
| int i; |
| |
| if (priv->fatal_error) |
| out += sprintf(out, "0x%08X\n", priv->fatal_error); |
| else |
| out += sprintf(out, "0\n"); |
| |
| for (i = 1; i <= IPW2100_ERROR_QUEUE; i++) { |
| if (!priv->fatal_errors[(priv->fatal_index - i) % |
| IPW2100_ERROR_QUEUE]) |
| continue; |
| |
| out += sprintf(out, "%d. 0x%08X\n", i, |
| priv->fatal_errors[(priv->fatal_index - i) % |
| IPW2100_ERROR_QUEUE]); |
| } |
| |
| return out - buf; |
| } |
| |
| static ssize_t store_fatal_error(struct device *d, |
| struct device_attribute *attr, const char *buf, |
| size_t count) |
| { |
| struct ipw2100_priv *priv = dev_get_drvdata(d); |
| schedule_reset(priv); |
| return count; |
| } |
| |
| static DEVICE_ATTR(fatal_error, S_IWUSR | S_IRUGO, show_fatal_error, |
| store_fatal_error); |
| |
| static ssize_t show_scan_age(struct device *d, struct device_attribute *attr, |
| char *buf) |
| { |
| struct ipw2100_priv *priv = dev_get_drvdata(d); |
| return sprintf(buf, "%d\n", priv->ieee->scan_age); |
| } |
| |
| static ssize_t store_scan_age(struct device *d, struct device_attribute *attr, |
| const char *buf, size_t count) |
| { |
| struct ipw2100_priv *priv = dev_get_drvdata(d); |
| struct net_device *dev = priv->net_dev; |
| char buffer[] = "00000000"; |
| unsigned long len = |
| (sizeof(buffer) - 1) > count ? count : sizeof(buffer) - 1; |
| unsigned long val; |
| char *p = buffer; |
| |
| (void)dev; /* kill unused-var warning for debug-only code */ |
| |
| IPW_DEBUG_INFO("enter\n"); |
| |
| strncpy(buffer, buf, len); |
| buffer[len] = 0; |
| |
| if (p[1] == 'x' || p[1] == 'X' || p[0] == 'x' || p[0] == 'X') { |
| p++; |
| if (p[0] == 'x' || p[0] == 'X') |
| p++; |
| val = simple_strtoul(p, &p, 16); |
| } else |
| val = simple_strtoul(p, &p, 10); |
| if (p == buffer) { |
| IPW_DEBUG_INFO("%s: user supplied invalid value.\n", dev->name); |
| } else { |
| priv->ieee->scan_age = val; |
| IPW_DEBUG_INFO("set scan_age = %u\n", priv->ieee->scan_age); |
| } |
| |
| IPW_DEBUG_INFO("exit\n"); |
| return len; |
| } |
| |
| static DEVICE_ATTR(scan_age, S_IWUSR | S_IRUGO, show_scan_age, store_scan_age); |
| |
| static ssize_t show_rf_kill(struct device *d, struct device_attribute *attr, |
| char *buf) |
| { |
| /* 0 - RF kill not enabled |
| 1 - SW based RF kill active (sysfs) |
| 2 - HW based RF kill active |
| 3 - Both HW and SW baed RF kill active */ |
| struct ipw2100_priv *priv = dev_get_drvdata(d); |
| int val = ((priv->status & STATUS_RF_KILL_SW) ? 0x1 : 0x0) | |
| (rf_kill_active(priv) ? 0x2 : 0x0); |
| return sprintf(buf, "%i\n", val); |
| } |
| |
| static int ipw_radio_kill_sw(struct ipw2100_priv *priv, int disable_radio) |
| { |
| if ((disable_radio ? 1 : 0) == |
| (priv->status & STATUS_RF_KILL_SW ? 1 : 0)) |
| return 0; |
| |
| IPW_DEBUG_RF_KILL("Manual SW RF Kill set to: RADIO %s\n", |
| disable_radio ? "OFF" : "ON"); |
| |
| mutex_lock(&priv->action_mutex); |
| |
| if (disable_radio) { |
| priv->status |= STATUS_RF_KILL_SW; |
| ipw2100_down(priv); |
| } else { |
| priv->status &= ~STATUS_RF_KILL_SW; |
| if (rf_kill_active(priv)) { |
| IPW_DEBUG_RF_KILL("Can not turn radio back on - " |
| "disabled by HW switch\n"); |
| /* Make sure the RF_KILL check timer is running */ |
| priv->stop_rf_kill = 0; |
| cancel_delayed_work(&priv->rf_kill); |
| schedule_delayed_work(&priv->rf_kill, |
| round_jiffies_relative(HZ)); |
| } else |
| schedule_reset(priv); |
| } |
| |
| mutex_unlock(&priv->action_mutex); |
| return 1; |
| } |
| |
| static ssize_t store_rf_kill(struct device *d, struct device_attribute *attr, |
| const char *buf, size_t count) |
| { |
| struct ipw2100_priv *priv = dev_get_drvdata(d); |
| ipw_radio_kill_sw(priv, buf[0] == '1'); |
| return count; |
| } |
| |
| static DEVICE_ATTR(rf_kill, S_IWUSR | S_IRUGO, show_rf_kill, store_rf_kill); |
| |
| static struct attribute *ipw2100_sysfs_entries[] = { |
| &dev_attr_hardware.attr, |
| &dev_attr_registers.attr, |
| &dev_attr_ordinals.attr, |
| &dev_attr_pci.attr, |
| &dev_attr_stats.attr, |
| &dev_attr_internals.attr, |
| &dev_attr_bssinfo.attr, |
| &dev_attr_memory.attr, |
| &dev_attr_scan_age.attr, |
| &dev_attr_fatal_error.attr, |
| &dev_attr_rf_kill.attr, |
| &dev_attr_cfg.attr, |
| &dev_attr_status.attr, |
| &dev_attr_capability.attr, |
| NULL, |
| }; |
| |
| static struct attribute_group ipw2100_attribute_group = { |
| .attrs = ipw2100_sysfs_entries, |
| }; |
| |
| static int status_queue_allocate(struct ipw2100_priv *priv, int entries) |
| { |
| struct ipw2100_status_queue *q = &priv->status_queue; |
| |
| IPW_DEBUG_INFO("enter\n"); |
| |
| q->size = entries * sizeof(struct ipw2100_status); |
| q->drv = |
| (struct ipw2100_status *)pci_alloc_consistent(priv->pci_dev, |
| q->size, &q->nic); |
| if (!q->drv) { |
| IPW_DEBUG_WARNING("Can not allocate status queue.\n"); |
| return -ENOMEM; |
| } |
| |
| memset(q->drv, 0, q->size); |
| |
| IPW_DEBUG_INFO("exit\n"); |
| |
| return 0; |
| } |
| |
| static void status_queue_free(struct ipw2100_priv *priv) |
| { |
| IPW_DEBUG_INFO("enter\n"); |
| |
| if (priv->status_queue.drv) { |
| pci_free_consistent(priv->pci_dev, priv->status_queue.size, |
| priv->status_queue.drv, |
| priv->status_queue.nic); |
| priv->status_queue.drv = NULL; |
| } |
| |
| IPW_DEBUG_INFO("exit\n"); |
| } |
| |
| static int bd_queue_allocate(struct ipw2100_priv *priv, |
| struct ipw2100_bd_queue *q, int entries) |
| { |
| IPW_DEBUG_INFO("enter\n"); |
| |
| memset(q, 0, sizeof(struct ipw2100_bd_queue)); |
| |
| q->entries = entries; |
| q->size = entries * sizeof(struct ipw2100_bd); |
| q->drv = pci_alloc_consistent(priv->pci_dev, q->size, &q->nic); |
| if (!q->drv) { |
| IPW_DEBUG_INFO |
| ("can't allocate shared memory for buffer descriptors\n"); |
| return -ENOMEM; |
| } |
| memset(q->drv, 0, q->size); |
| |
| IPW_DEBUG_INFO("exit\n"); |
| |
| return 0; |
| } |
| |
| static void bd_queue_free(struct ipw2100_priv *priv, struct ipw2100_bd_queue *q) |
| { |
| IPW_DEBUG_INFO("enter\n"); |
| |
| if (!q) |
| return; |
| |
| if (q->drv) { |
| pci_free_consistent(priv->pci_dev, q->size, q->drv, q->nic); |
| q->drv = NULL; |
| } |
| |
| IPW_DEBUG_INFO("exit\n"); |
| } |
| |
| static void bd_queue_initialize(struct ipw2100_priv *priv, |
| struct ipw2100_bd_queue *q, u32 base, u32 size, |
| u32 r, u32 w) |
| { |
| IPW_DEBUG_INFO("enter\n"); |
| |
| IPW_DEBUG_INFO("initializing bd queue at virt=%p, phys=%08x\n", q->drv, |
| (u32) q->nic); |
| |
| write_register(priv->net_dev, base, q->nic); |
| write_register(priv->net_dev, size, q->entries); |
| write_register(priv->net_dev, r, q->oldest); |
| write_register(priv->net_dev, w, q->next); |
| |
| IPW_DEBUG_INFO("exit\n"); |
| } |
| |
| static void ipw2100_kill_works(struct ipw2100_priv *priv) |
| { |
| priv->stop_rf_kill = 1; |
| priv->stop_hang_check = 1; |
| cancel_delayed_work_sync(&priv->reset_work); |
| cancel_delayed_work_sync(&priv->security_work); |
| cancel_delayed_work_sync(&priv->wx_event_work); |
| cancel_delayed_work_sync(&priv->hang_check); |
| cancel_delayed_work_sync(&priv->rf_kill); |
| cancel_work_sync(&priv->scan_event_now); |
| cancel_delayed_work_sync(&priv->scan_event_later); |
| } |
| |
| static int ipw2100_tx_allocate(struct ipw2100_priv *priv) |
| { |
| int i, j, err = -EINVAL; |
| void *v; |
| dma_addr_t p; |
| |
| IPW_DEBUG_INFO("enter\n"); |
| |
| err = bd_queue_allocate(priv, &priv->tx_queue, TX_QUEUE_LENGTH); |
| if (err) { |
| IPW_DEBUG_ERROR("%s: failed bd_queue_allocate\n", |
| priv->net_dev->name); |
| return err; |
| } |
| |
| priv->tx_buffers = |
| kmalloc(TX_PENDED_QUEUE_LENGTH * sizeof(struct ipw2100_tx_packet), |
| GFP_ATOMIC); |
| if (!priv->tx_buffers) { |
| printk(KERN_ERR DRV_NAME |
| ": %s: alloc failed form tx buffers.\n", |
| priv->net_dev->name); |
| bd_queue_free(priv, &priv->tx_queue); |
| return -ENOMEM; |
| } |
| |
| for (i = 0; i < TX_PENDED_QUEUE_LENGTH; i++) { |
| v = pci_alloc_consistent(priv->pci_dev, |
| sizeof(struct ipw2100_data_header), |
| &p); |
| if (!v) { |
| printk(KERN_ERR DRV_NAME |
| ": %s: PCI alloc failed for tx " "buffers.\n", |
| priv->net_dev->name); |
| err = -ENOMEM; |
| break; |
| } |
| |
| priv->tx_buffers[i].type = DATA; |
| priv->tx_buffers[i].info.d_struct.data = |
| (struct ipw2100_data_header *)v; |
| priv->tx_buffers[i].info.d_struct.data_phys = p; |
| priv->tx_buffers[i].info.d_struct.txb = NULL; |
| } |
| |
| if (i == TX_PENDED_QUEUE_LENGTH) |
| return 0; |
| |
| for (j = 0; j < i; j++) { |
| pci_free_consistent(priv->pci_dev, |
| sizeof(struct ipw2100_data_header), |
| priv->tx_buffers[j].info.d_struct.data, |
| priv->tx_buffers[j].info.d_struct. |
| data_phys); |
| } |
| |
| kfree(priv->tx_buffers); |
| priv->tx_buffers = NULL; |
| |
| return err; |
| } |
| |
| static void ipw2100_tx_initialize(struct ipw2100_priv *priv) |
| { |
| int i; |
| |
| IPW_DEBUG_INFO("enter\n"); |
| |
| /* |
| * reinitialize packet info lists |
| */ |
| INIT_LIST_HEAD(&priv->fw_pend_list); |
| INIT_STAT(&priv->fw_pend_stat); |
| |
| /* |
| * reinitialize lists |
| */ |
| INIT_LIST_HEAD(&priv->tx_pend_list); |
| INIT_LIST_HEAD(&priv->tx_free_list); |
| INIT_STAT(&priv->tx_pend_stat); |
| INIT_STAT(&priv->tx_free_stat); |
| |
| for (i = 0; i < TX_PENDED_QUEUE_LENGTH; i++) { |
| /* We simply drop any SKBs that have been queued for |
| * transmit */ |
| if (priv->tx_buffers[i].info.d_struct.txb) { |
| libipw_txb_free(priv->tx_buffers[i].info.d_struct. |
| txb); |
| priv->tx_buffers[i].info.d_struct.txb = NULL; |
| } |
| |
| list_add_tail(&priv->tx_buffers[i].list, &priv->tx_free_list); |
| } |
| |
| SET_STAT(&priv->tx_free_stat, i); |
| |
| priv->tx_queue.oldest = 0; |
| priv->tx_queue.available = priv->tx_queue.entries; |
| priv->tx_queue.next = 0; |
| INIT_STAT(&priv->txq_stat); |
| SET_STAT(&priv->txq_stat, priv->tx_queue.available); |
| |
| bd_queue_initialize(priv, &priv->tx_queue, |
| IPW_MEM_HOST_SHARED_TX_QUEUE_BD_BASE, |
| IPW_MEM_HOST_SHARED_TX_QUEUE_BD_SIZE, |
| IPW_MEM_HOST_SHARED_TX_QUEUE_READ_INDEX, |
| IPW_MEM_HOST_SHARED_TX_QUEUE_WRITE_INDEX); |
| |
| IPW_DEBUG_INFO("exit\n"); |
| |
| } |
| |
| static void ipw2100_tx_free(struct ipw2100_priv *priv) |
| { |
| int i; |
| |
| IPW_DEBUG_INFO("enter\n"); |
| |
| bd_queue_free(priv, &priv->tx_queue); |
| |
| if (!priv->tx_buffers) |
| return; |
| |
| for (i = 0; i < TX_PENDED_QUEUE_LENGTH; i++) { |
| if (priv->tx_buffers[i].info.d_struct.txb) { |
| libipw_txb_free(priv->tx_buffers[i].info.d_struct. |
| txb); |
| priv->tx_buffers[i].info.d_struct.txb = NULL; |
| } |
| if (priv->tx_buffers[i].info.d_struct.data) |
| pci_free_consistent(priv->pci_dev, |
| sizeof(struct ipw2100_data_header), |
| priv->tx_buffers[i].info.d_struct. |
| data, |
| priv->tx_buffers[i].info.d_struct. |
| data_phys); |
| } |
| |
| kfree(priv->tx_buffers); |
| priv->tx_buffers = NULL; |
| |
| IPW_DEBUG_INFO("exit\n"); |
| } |
| |
| static int ipw2100_rx_allocate(struct ipw2100_priv *priv) |
| { |
| int i, j, err = -EINVAL; |
| |
| IPW_DEBUG_INFO("enter\n"); |
| |
| err = bd_queue_allocate(priv, &priv->rx_queue, RX_QUEUE_LENGTH); |
| if (err) { |
| IPW_DEBUG_INFO("failed bd_queue_allocate\n"); |
| return err; |
| } |
| |
| err = status_queue_allocate(priv, RX_QUEUE_LENGTH); |
| if (err) { |
| IPW_DEBUG_INFO("failed status_queue_allocate\n"); |
| bd_queue_free(priv, &priv->rx_queue); |
| return err; |
| } |
| |
| /* |
| * allocate packets |
| */ |
| priv->rx_buffers = kmalloc(RX_QUEUE_LENGTH * |
| sizeof(struct ipw2100_rx_packet), |
| GFP_KERNEL); |
| if (!priv->rx_buffers) { |
| IPW_DEBUG_INFO("can't allocate rx packet buffer table\n"); |
| |
| bd_queue_free(priv, &priv->rx_queue); |
| |
| status_queue_free(priv); |
| |
| return -ENOMEM; |
| } |
| |
| for (i = 0; i < RX_QUEUE_LENGTH; i++) { |
| struct ipw2100_rx_packet *packet = &priv->rx_buffers[i]; |
| |
| err = ipw2100_alloc_skb(priv, packet); |
| if (unlikely(err)) { |
| err = -ENOMEM; |
| break; |
| } |
| |
| /* The BD holds the cache aligned address */ |
| priv->rx_queue.drv[i].host_addr = packet->dma_addr; |
| priv->rx_queue.drv[i].buf_length = IPW_RX_NIC_BUFFER_LENGTH; |
| priv->status_queue.drv[i].status_fields = 0; |
| } |
| |
| if (i == RX_QUEUE_LENGTH) |
| return 0; |
| |
| for (j = 0; j < i; j++) { |
| pci_unmap_single(priv->pci_dev, priv->rx_buffers[j].dma_addr, |
| sizeof(struct ipw2100_rx_packet), |
| PCI_DMA_FROMDEVICE); |
| dev_kfree_skb(priv->rx_buffers[j].skb); |
| } |
| |
| kfree(priv->rx_buffers); |
| priv->rx_buffers = NULL; |
| |
| bd_queue_free(priv, &priv->rx_queue); |
| |
| status_queue_free(priv); |
| |
| return err; |
| } |
| |
| static void ipw2100_rx_initialize(struct ipw2100_priv *priv) |
| { |
| IPW_DEBUG_INFO("enter\n"); |
| |
| priv->rx_queue.oldest = 0; |
| priv->rx_queue.available = priv->rx_queue.entries - 1; |
| priv->rx_queue.next = priv->rx_queue.entries - 1; |
| |
| INIT_STAT(&priv->rxq_stat); |
| SET_STAT(&priv->rxq_stat, priv->rx_queue.available); |
| |
| bd_queue_initialize(priv, &priv->rx_queue, |
| IPW_MEM_HOST_SHARED_RX_BD_BASE, |
| IPW_MEM_HOST_SHARED_RX_BD_SIZE, |
| IPW_MEM_HOST_SHARED_RX_READ_INDEX, |
| IPW_MEM_HOST_SHARED_RX_WRITE_INDEX); |
| |
| /* set up the status queue */ |
| write_register(priv->net_dev, IPW_MEM_HOST_SHARED_RX_STATUS_BASE, |
| priv->status_queue.nic); |
| |
| IPW_DEBUG_INFO("exit\n"); |
| } |
| |
| static void ipw2100_rx_free(struct ipw2100_priv *priv) |
| { |
| int i; |
| |
| IPW_DEBUG_INFO("enter\n"); |
| |
| bd_queue_free(priv, &priv->rx_queue); |
| status_queue_free(priv); |
| |
| if (!priv->rx_buffers) |
| return; |
| |
| for (i = 0; i < RX_QUEUE_LENGTH; i++) { |
| if (priv->rx_buffers[i].rxp) { |
| pci_unmap_single(priv->pci_dev, |
| priv->rx_buffers[i].dma_addr, |
| sizeof(struct ipw2100_rx), |
| PCI_DMA_FROMDEVICE); |
| dev_kfree_skb(priv->rx_buffers[i].skb); |
| } |
| } |
| |
| kfree(priv->rx_buffers); |
| priv->rx_buffers = NULL; |
| |
| IPW_DEBUG_INFO("exit\n"); |
| } |
| |
| static int ipw2100_read_mac_address(struct ipw2100_priv *priv) |
| { |
| u32 length = ETH_ALEN; |
| u8 addr[ETH_ALEN]; |
| |
| int err; |
| |
| err = ipw2100_get_ordinal(priv, IPW_ORD_STAT_ADAPTER_MAC, addr, &length); |
| if (err) { |
| IPW_DEBUG_INFO("MAC address read failed\n"); |
| return -EIO; |
| } |
| |
| memcpy(priv->net_dev->dev_addr, addr, ETH_ALEN); |
| IPW_DEBUG_INFO("card MAC is %pM\n", priv->net_dev->dev_addr); |
| |
| return 0; |
| } |
| |
| /******************************************************************** |
| * |
| * Firmware Commands |
| * |
| ********************************************************************/ |
| |
| static int ipw2100_set_mac_address(struct ipw2100_priv *priv, int batch_mode) |
| { |
| struct host_command cmd = { |
| .host_command = ADAPTER_ADDRESS, |
| .host_command_sequence = 0, |
| .host_command_length = ETH_ALEN |
| }; |
| int err; |
| |
| IPW_DEBUG_HC("SET_MAC_ADDRESS\n"); |
| |
| IPW_DEBUG_INFO("enter\n"); |
| |
| if (priv->config & CFG_CUSTOM_MAC) { |
| memcpy(cmd.host_command_parameters, priv->mac_addr, ETH_ALEN); |
| memcpy(priv->net_dev->dev_addr, priv->mac_addr, ETH_ALEN); |
| } else |
| memcpy(cmd.host_command_parameters, priv->net_dev->dev_addr, |
| ETH_ALEN); |
| |
| err = ipw2100_hw_send_command(priv, &cmd); |
| |
| IPW_DEBUG_INFO("exit\n"); |
| return err; |
| } |
| |
| static int ipw2100_set_port_type(struct ipw2100_priv *priv, u32 port_type, |
| int batch_mode) |
| { |
| struct host_command cmd = { |
| .host_command = PORT_TYPE, |
| .host_command_sequence = 0, |
| .host_command_length = sizeof(u32) |
| }; |
| int err; |
| |
| switch (port_type) { |
| case IW_MODE_INFRA: |
| cmd.host_command_parameters[0] = IPW_BSS; |
| break; |
| case IW_MODE_ADHOC: |
| cmd.host_command_parameters[0] = IPW_IBSS; |
| break; |
| } |
| |
| IPW_DEBUG_HC("PORT_TYPE: %s\n", |
| port_type == IPW_IBSS ? "Ad-Hoc" : "Managed"); |
| |
| if (!batch_mode) { |
| err = ipw2100_disable_adapter(priv); |
| if (err) { |
| printk(KERN_ERR DRV_NAME |
| ": %s: Could not disable adapter %d\n", |
| priv->net_dev->name, err); |
| return err; |
| } |
| } |
| |
| /* send cmd to firmware */ |
| err = ipw2100_hw_send_command(priv, &cmd); |
| |
| if (!batch_mode) |
| ipw2100_enable_adapter(priv); |
| |
| return err; |
| } |
| |
| static int ipw2100_set_channel(struct ipw2100_priv *priv, u32 channel, |
| int batch_mode) |
| { |
| struct host_command cmd = { |
| .host_command = CHANNEL, |
| .host_command_sequence = 0, |
| .host_command_length = sizeof(u32) |
| }; |
| int err; |
| |
| cmd.host_command_parameters[0] = channel; |
| |
| IPW_DEBUG_HC("CHANNEL: %d\n", channel); |
| |
| /* If BSS then we don't support channel selection */ |
| if (priv->ieee->iw_mode == IW_MODE_INFRA) |
| return 0; |
| |
| if ((channel != 0) && |
| ((channel < REG_MIN_CHANNEL) || (channel > REG_MAX_CHANNEL))) |
| return -EINVAL; |
| |
| if (!batch_mode) { |
| err = ipw2100_disable_adapter(priv); |
| if (err) |
| return err; |
| } |
| |
| err = ipw2100_hw_send_command(priv, &cmd); |
| if (err) { |
| IPW_DEBUG_INFO("Failed to set channel to %d", channel); |
| return err; |
| } |
| |
| if (channel) |
| priv->config |= CFG_STATIC_CHANNEL; |
| else |
| priv->config &= ~CFG_STATIC_CHANNEL; |
| |
| priv->channel = channel; |
| |
| if (!batch_mode) { |
| err = ipw2100_enable_adapter(priv); |
| if (err) |
| return err; |
| } |
| |
| return 0; |
| } |
| |
| static int ipw2100_system_config(struct ipw2100_priv *priv, int batch_mode) |
| { |
| struct host_command cmd = { |
| .host_command = SYSTEM_CONFIG, |
| .host_command_sequence = 0, |
| .host_command_length = 12, |
| }; |
| u32 ibss_mask, len = sizeof(u32); |
| int err; |
| |
| /* Set system configuration */ |
| |
| if (!batch_mode) { |
| err = ipw2100_disable_adapter(priv); |
| if (err) |
| return err; |
| } |
| |
| if (priv->ieee->iw_mode == IW_MODE_ADHOC) |
| cmd.host_command_parameters[0] |= IPW_CFG_IBSS_AUTO_START; |
| |
| cmd.host_command_parameters[0] |= IPW_CFG_IBSS_MASK | |
| IPW_CFG_BSS_MASK | IPW_CFG_802_1x_ENABLE; |
| |
| if (!(priv->config & CFG_LONG_PREAMBLE)) |
| cmd.host_command_parameters[0] |= IPW_CFG_PREAMBLE_AUTO; |
| |
| err = ipw2100_get_ordinal(priv, |
| IPW_ORD_EEPROM_IBSS_11B_CHANNELS, |
| &ibss_mask, &len); |
| if (err) |
| ibss_mask = IPW_IBSS_11B_DEFAULT_MASK; |
| |
| cmd.host_command_parameters[1] = REG_CHANNEL_MASK; |
| cmd.host_command_parameters[2] = REG_CHANNEL_MASK & ibss_mask; |
| |
| /* 11b only */ |
| /*cmd.host_command_parameters[0] |= DIVERSITY_ANTENNA_A; */ |
| |
| err = ipw2100_hw_send_command(priv, &cmd); |
| if (err) |
| return err; |
| |
| /* If IPv6 is configured in the kernel then we don't want to filter out all |
| * of the multicast packets as IPv6 needs some. */ |
| #if !defined(CONFIG_IPV6) && !defined(CONFIG_IPV6_MODULE) |
| cmd.host_command = ADD_MULTICAST; |
| cmd.host_command_sequence = 0; |
| cmd.host_command_length = 0; |
| |
| ipw2100_hw_send_command(priv, &cmd); |
| #endif |
| if (!batch_mode) { |
| err = ipw2100_enable_adapter(priv); |
| if (err) |
| return err; |
| } |
| |
| return 0; |
| } |
| |
| static int ipw2100_set_tx_rates(struct ipw2100_priv *priv, u32 rate, |
| int batch_mode) |
| { |
| struct host_command cmd = { |
| .host_command = BASIC_TX_RATES, |
| .host_command_sequence = 0, |
| .host_command_length = 4 |
| }; |
| int err; |
| |
| cmd.host_command_parameters[0] = rate & TX_RATE_MASK; |
| |
| if (!batch_mode) { |
| err = ipw2100_disable_adapter(priv); |
| if (err) |
| return err; |
| } |
| |
| /* Set BASIC TX Rate first */ |
| ipw2100_hw_send_command(priv, &cmd); |
| |
| /* Set TX Rate */ |
| cmd.host_command = TX_RATES; |
| ipw2100_hw_send_command(priv, &cmd); |
| |
| /* Set MSDU TX Rate */ |
| cmd.host_command = MSDU_TX_RATES; |
| ipw2100_hw_send_command(priv, &cmd); |
| |
| if (!batch_mode) { |
| err = ipw2100_enable_adapter(priv); |
| if (err) |
| return err; |
| } |
| |
| priv->tx_rates = rate; |
| |
| return 0; |
| } |
| |
| static int ipw2100_set_power_mode(struct ipw2100_priv *priv, int power_level) |
| { |
| struct host_command cmd = { |
| .host_command = POWER_MODE, |
| .host_command_sequence = 0, |
| .host_command_length = 4 |
| }; |
| int err; |
| |
| cmd.host_command_parameters[0] = power_level; |
| |
| err = ipw2100_hw_send_command(priv, &cmd); |
| if (err) |
| return err; |
| |
| if (power_level == IPW_POWER_MODE_CAM) |
| priv->power_mode = IPW_POWER_LEVEL(priv->power_mode); |
| else |
| priv->power_mode = IPW_POWER_ENABLED | power_level; |
| |
| #ifdef IPW2100_TX_POWER |
| if (priv->port_type == IBSS && priv->adhoc_power != DFTL_IBSS_TX_POWER) { |
| /* Set beacon interval */ |
| cmd.host_command = TX_POWER_INDEX; |
| cmd.host_command_parameters[0] = (u32) priv->adhoc_power; |
| |
| err = ipw2100_hw_send_command(priv, &cmd); |
| if (err) |
| return err; |
| } |
| #endif |
| |
| return 0; |
| } |
| |
| static int ipw2100_set_rts_threshold(struct ipw2100_priv *priv, u32 threshold) |
| { |
| struct host_command cmd = { |
| .host_command = RTS_THRESHOLD, |
| .host_command_sequence = 0, |
| .host_command_length = 4 |
| }; |
| int err; |
| |
| if (threshold & RTS_DISABLED) |
| cmd.host_command_parameters[0] = MAX_RTS_THRESHOLD; |
| else |
| cmd.host_command_parameters[0] = threshold & ~RTS_DISABLED; |
| |
| err = ipw2100_hw_send_command(priv, &cmd); |
| if (err) |
| return err; |
| |
| priv->rts_threshold = threshold; |
| |
| return 0; |
| } |
| |
| #if 0 |
| int ipw2100_set_fragmentation_threshold(struct ipw2100_priv *priv, |
| u32 threshold, int batch_mode) |
| { |
| struct host_command cmd = { |
| .host_command = FRAG_THRESHOLD, |
| .host_command_sequence = 0, |
| .host_command_length = 4, |
| .host_command_parameters[0] = 0, |
| }; |
| int err; |
| |
| if (!batch_mode) { |
| err = ipw2100_disable_adapter(priv); |
| if (err) |
| return err; |
| } |
| |
| if (threshold == 0) |
| threshold = DEFAULT_FRAG_THRESHOLD; |
| else { |
| threshold = max(threshold, MIN_FRAG_THRESHOLD); |
| threshold = min(threshold, MAX_FRAG_THRESHOLD); |
| } |
| |
| cmd.host_command_parameters[0] = threshold; |
| |
| IPW_DEBUG_HC("FRAG_THRESHOLD: %u\n", threshold); |
| |
| err = ipw2100_hw_send_command(priv, &cmd); |
| |
| if (!batch_mode) |
| ipw2100_enable_adapter(priv); |
| |
| if (!err) |
| priv->frag_threshold = threshold; |
| |
| return err; |
| } |
| #endif |
| |
| static int ipw2100_set_short_retry(struct ipw2100_priv *priv, u32 retry) |
| { |
| struct host_command cmd = { |
| .host_command = SHORT_RETRY_LIMIT, |
| .host_command_sequence = 0, |
| .host_command_length = 4 |
| }; |
| int err; |
| |
| cmd.host_command_parameters[0] = retry; |
| |
| err = ipw2100_hw_send_command(priv, &cmd); |
| if (err) |
| return err; |
| |
| priv->short_retry_limit = retry; |
| |
| return 0; |
| } |
| |
| static int ipw2100_set_long_retry(struct ipw2100_priv *priv, u32 retry) |
| { |
| struct host_command cmd = { |
| .host_command = LONG_RETRY_LIMIT, |
| .host_command_sequence = 0, |
| .host_command_length = 4 |
| }; |
| int err; |
| |
| cmd.host_command_parameters[0] = retry; |
| |
| err = ipw2100_hw_send_command(priv, &cmd); |
| if (err) |
| return err; |
| |
| priv->long_retry_limit = retry; |
| |
| return 0; |
| } |
| |
| static int ipw2100_set_mandatory_bssid(struct ipw2100_priv *priv, u8 * bssid, |
| int batch_mode) |
| { |
| struct host_command cmd = { |
| .host_command = MANDATORY_BSSID, |
| .host_command_sequence = 0, |
| .host_command_length = (bssid == NULL) ? 0 : ETH_ALEN |
| }; |
| int err; |
| |
| #ifdef CONFIG_IPW2100_DEBUG |
| if (bssid != NULL) |
| IPW_DEBUG_HC("MANDATORY_BSSID: %pM\n", bssid); |
| else |
| IPW_DEBUG_HC("MANDATORY_BSSID: <clear>\n"); |
| #endif |
| /* if BSSID is empty then we disable mandatory bssid mode */ |
| if (bssid != NULL) |
| memcpy(cmd.host_command_parameters, bssid, ETH_ALEN); |
| |
| if (!batch_mode) { |
| err = ipw2100_disable_adapter(priv); |
| if (err) |
| return err; |
| } |
| |
| err = ipw2100_hw_send_command(priv, &cmd); |
| |
| if (!batch_mode) |
| ipw2100_enable_adapter(priv); |
| |
| return err; |
| } |
| |
| static int ipw2100_disassociate_bssid(struct ipw2100_priv *priv) |
| { |
| struct host_command cmd = { |
| .host_command = DISASSOCIATION_BSSID, |
| .host_command_sequence = 0, |
| .host_command_length = ETH_ALEN |
| }; |
| int err; |
| int len; |
| |
| IPW_DEBUG_HC("DISASSOCIATION_BSSID\n"); |
| |
| len = ETH_ALEN; |
| /* The Firmware currently ignores the BSSID and just disassociates from |
| * the currently associated AP -- but in the off chance that a future |
| * firmware does use the BSSID provided here, we go ahead and try and |
| * set it to the currently associated AP's BSSID */ |
| memcpy(cmd.host_command_parameters, priv->bssid, ETH_ALEN); |
| |
| err = ipw2100_hw_send_command(priv, &cmd); |
| |
| return err; |
| } |
| |
| static int ipw2100_set_wpa_ie(struct ipw2100_priv *, |
| struct ipw2100_wpa_assoc_frame *, int) |
| __attribute__ ((unused)); |
| |
| static int ipw2100_set_wpa_ie(struct ipw2100_priv *priv, |
| struct ipw2100_wpa_assoc_frame *wpa_frame, |
| int batch_mode) |
| { |
| struct host_command cmd = { |
| .host_command = SET_WPA_IE, |
| .host_command_sequence = 0, |
| .host_command_length = sizeof(struct ipw2100_wpa_assoc_frame), |
| }; |
| int err; |
| |
| IPW_DEBUG_HC("SET_WPA_IE\n"); |
| |
| if (!batch_mode) { |
| err = ipw2100_disable_adapter(priv); |
| if (err) |
| return err; |
| } |
| |
| memcpy(cmd.host_command_parameters, wpa_frame, |
| sizeof(struct ipw2100_wpa_assoc_frame)); |
| |
| err = ipw2100_hw_send_command(priv, &cmd); |
| |
| if (!batch_mode) { |
| if (ipw2100_enable_adapter(priv)) |
| err = -EIO; |
| } |
| |
| return err; |
| } |
| |
| struct security_info_params { |
| u32 allowed_ciphers; |
| u16 version; |
| u8 auth_mode; |
| u8 replay_counters_number; |
| u8 unicast_using_group; |
| } __packed; |
| |
| static int ipw2100_set_security_information(struct ipw2100_priv *priv, |
| int auth_mode, |
| int security_level, |
| int unicast_using_group, |
| int batch_mode) |
| { |
| struct host_command cmd = { |
| .host_command = SET_SECURITY_INFORMATION, |
| .host_command_sequence = 0, |
| .host_command_length = sizeof(struct security_info_params) |
| }; |
| struct security_info_params *security = |
| (struct security_info_params *)&cmd.host_command_parameters; |
| int err; |
| memset(security, 0, sizeof(*security)); |
| |
| /* If shared key AP authentication is turned on, then we need to |
| * configure the firmware to try and use it. |
| * |
| * Actual data encryption/decryption is handled by the host. */ |
| security->auth_mode = auth_mode; |
| security->unicast_using_group = unicast_using_group; |
| |
| switch (security_level) { |
| default: |
| case SEC_LEVEL_0: |
| security->allowed_ciphers = IPW_NONE_CIPHER; |
| break; |
| case SEC_LEVEL_1: |
| security->allowed_ciphers = IPW_WEP40_CIPHER | |
| IPW_WEP104_CIPHER; |
| break; |
| case SEC_LEVEL_2: |
| security->allowed_ciphers = IPW_WEP40_CIPHER | |
| IPW_WEP104_CIPHER | IPW_TKIP_CIPHER; |
| break; |
| case SEC_LEVEL_2_CKIP: |
| security->allowed_ciphers = IPW_WEP40_CIPHER | |
| IPW_WEP104_CIPHER | IPW_CKIP_CIPHER; |
| break; |
| case SEC_LEVEL_3: |
| security->allowed_ciphers = IPW_WEP40_CIPHER | |
| IPW_WEP104_CIPHER | IPW_TKIP_CIPHER | IPW_CCMP_CIPHER; |
| break; |
| } |
| |
| IPW_DEBUG_HC |
| ("SET_SECURITY_INFORMATION: auth:%d cipher:0x%02X (level %d)\n", |
| security->auth_mode, security->allowed_ciphers, security_level); |
| |
| security->replay_counters_number = 0; |
| |
| if (!batch_mode) { |
| err = ipw2100_disable_adapter(priv); |
| if (err) |
| return err; |
| } |
| |
| err = ipw2100_hw_send_command(priv, &cmd); |
| |
| if (!batch_mode) |
| ipw2100_enable_adapter(priv); |
| |
| return err; |
| } |
| |
| static int ipw2100_set_tx_power(struct ipw2100_priv *priv, u32 tx_power) |
| { |
| struct host_command cmd = { |
| .host_command = TX_POWER_INDEX, |
| .host_command_sequence = 0, |
| .host_command_length = 4 |
| }; |
| int err = 0; |
| u32 tmp = tx_power; |
| |
| if (tx_power != IPW_TX_POWER_DEFAULT) |
| tmp = (tx_power - IPW_TX_POWER_MIN_DBM) * 16 / |
| (IPW_TX_POWER_MAX_DBM - IPW_TX_POWER_MIN_DBM); |
| |
| cmd.host_command_parameters[0] = tmp; |
| |
| if (priv->ieee->iw_mode == IW_MODE_ADHOC) |
| err = ipw2100_hw_send_command(priv, &cmd); |
| if (!err) |
| priv->tx_power = tx_power; |
| |
| return 0; |
| } |
| |
| static int ipw2100_set_ibss_beacon_interval(struct ipw2100_priv *priv, |
| u32 interval, int batch_mode) |
| { |
| struct host_command cmd = { |
| .host_command = BEACON_INTERVAL, |
| .host_command_sequence = 0, |
| .host_command_length = 4 |
| }; |
| int err; |
| |
| cmd.host_command_parameters[0] = interval; |
| |
| IPW_DEBUG_INFO("enter\n"); |
| |
| if (priv->ieee->iw_mode == IW_MODE_ADHOC) { |
| if (!batch_mode) { |
| err = ipw2100_disable_adapter(priv); |
| if (err) |
| return err; |
| } |
| |
| ipw2100_hw_send_command(priv, &cmd); |
| |
| if (!batch_mode) { |
| err = ipw2100_enable_adapter(priv); |
| if (err) |
| return err; |
| } |
| } |
| |
| IPW_DEBUG_INFO("exit\n"); |
| |
| return 0; |
| } |
| |
| static void ipw2100_queues_initialize(struct ipw2100_priv *priv) |
| { |
| ipw2100_tx_initialize(priv); |
| ipw2100_rx_initialize(priv); |
| ipw2100_msg_initialize(priv); |
| } |
| |
| static void ipw2100_queues_free(struct ipw2100_priv *priv) |
| { |
| ipw2100_tx_free(priv); |
| ipw2100_rx_free(priv); |
| ipw2100_msg_free(priv); |
| } |
| |
| static int ipw2100_queues_allocate(struct ipw2100_priv *priv) |
| { |
| if (ipw2100_tx_allocate(priv) || |
| ipw2100_rx_allocate(priv) || ipw2100_msg_allocate(priv)) |
| goto fail; |
| |
| return 0; |
| |
| fail: |
| ipw2100_tx_free(priv); |
| ipw2100_rx_free(priv); |
| ipw2100_msg_free(priv); |
| return -ENOMEM; |
| } |
| |
| #define IPW_PRIVACY_CAPABLE 0x0008 |
| |
| static int ipw2100_set_wep_flags(struct ipw2100_priv *priv, u32 flags, |
| int batch_mode) |
| { |
| struct host_command cmd = { |
| .host_command = WEP_FLAGS, |
| .host_command_sequence = 0, |
| .host_command_length = 4 |
| }; |
| int err; |
| |
| cmd.host_command_parameters[0] = flags; |
| |
| IPW_DEBUG_HC("WEP_FLAGS: flags = 0x%08X\n", flags); |
| |
| if (!batch_mode) { |
| err = ipw2100_disable_adapter(priv); |
| if (err) { |
| printk(KERN_ERR DRV_NAME |
| ": %s: Could not disable adapter %d\n", |
| priv->net_dev->name, err); |
| return err; |
| } |
| } |
| |
| /* send cmd to firmware */ |
| err = ipw2100_hw_send_command(priv, &cmd); |
| |
| if (!batch_mode) |
| ipw2100_enable_adapter(priv); |
| |
| return err; |
| } |
| |
| struct ipw2100_wep_key { |
| u8 idx; |
| u8 len; |
| u8 key[13]; |
| }; |
| |
| /* Macros to ease up priting WEP keys */ |
| #define WEP_FMT_64 "%02X%02X%02X%02X-%02X" |
| #define WEP_FMT_128 "%02X%02X%02X%02X-%02X%02X%02X%02X-%02X%02X%02X" |
| #define WEP_STR_64(x) x[0],x[1],x[2],x[3],x[4] |
| #define WEP_STR_128(x) x[0],x[1],x[2],x[3],x[4],x[5],x[6],x[7],x[8],x[9],x[10] |
| |
| /** |
| * Set a the wep key |
| * |
| * @priv: struct to work on |
| * @idx: index of the key we want to set |
| * @key: ptr to the key data to set |
| * @len: length of the buffer at @key |
| * @batch_mode: FIXME perform the operation in batch mode, not |
| * disabling the device. |
| * |
| * @returns 0 if OK, < 0 errno code on error. |
| * |
| * Fill out a command structure with the new wep key, length an |
| * index and send it down the wire. |
| */ |
| static int ipw2100_set_key(struct ipw2100_priv *priv, |
| int idx, char *key, int len, int batch_mode) |
| { |
| int keylen = len ? (len <= 5 ? 5 : 13) : 0; |
| struct host_command cmd = { |
| .host_command = WEP_KEY_INFO, |
| .host_command_sequence = 0, |
| .host_command_length = sizeof(struct ipw2100_wep_key), |
| }; |
| struct ipw2100_wep_key *wep_key = (void *)cmd.host_command_parameters; |
| int err; |
| |
| IPW_DEBUG_HC("WEP_KEY_INFO: index = %d, len = %d/%d\n", |
| idx, keylen, len); |
| |
| /* NOTE: We don't check cached values in case the firmware was reset |
| * or some other problem is occurring. If the user is setting the key, |
| * then we push the change */ |
| |
| wep_key->idx = idx; |
| wep_key->len = keylen; |
| |
| if (keylen) { |
| memcpy(wep_key->key, key, len); |
| memset(wep_key->key + len, 0, keylen - len); |
| } |
| |
| /* Will be optimized out on debug not being configured in */ |
| if (keylen == 0) |
| IPW_DEBUG_WEP("%s: Clearing key %d\n", |
| priv->net_dev->name, wep_key->idx); |
| else if (keylen == 5) |
| IPW_DEBUG_WEP("%s: idx: %d, len: %d key: " WEP_FMT_64 "\n", |
| priv->net_dev->name, wep_key->idx, wep_key->len, |
| WEP_STR_64(wep_key->key)); |
| else |
| IPW_DEBUG_WEP("%s: idx: %d, len: %d key: " WEP_FMT_128 |
| "\n", |
| priv->net_dev->name, wep_key->idx, wep_key->len, |
| WEP_STR_128(wep_key->key)); |
| |
| if (!batch_mode) { |
| err = ipw2100_disable_adapter(priv); |
| /* FIXME: IPG: shouldn't this prink be in _disable_adapter()? */ |
| if (err) { |
| printk(KERN_ERR DRV_NAME |
| ": %s: Could not disable adapter %d\n", |
| priv->net_dev->name, err); |
| return err; |
| } |
| } |
| |
| /* send cmd to firmware */ |
| err = ipw2100_hw_send_command(priv, &cmd); |
| |
| if (!batch_mode) { |
| int err2 = ipw2100_enable_adapter(priv); |
| if (err == 0) |
| err = err2; |
| } |
| return err; |
| } |
| |
| static int ipw2100_set_key_index(struct ipw2100_priv *priv, |
| int idx, int batch_mode) |
| { |
| struct host_command cmd = { |
| .host_command = WEP_KEY_INDEX, |
| .host_command_sequence = 0, |
| .host_command_length = 4, |
| .host_command_parameters = {idx}, |
| }; |
| int err; |
| |
| IPW_DEBUG_HC("WEP_KEY_INDEX: index = %d\n", idx); |
| |
| if (idx < 0 || idx > 3) |
| return -EINVAL; |
| |
| if (!batch_mode) { |
| err = ipw2100_disable_adapter(priv); |
| if (err) { |
| printk(KERN_ERR DRV_NAME |
| ": %s: Could not disable adapter %d\n", |
| priv->net_dev->name, err); |
| return err; |
| } |
| } |
| |
| /* send cmd to firmware */ |
| err = ipw2100_hw_send_command(priv, &cmd); |
| |
| if (!batch_mode) |
| ipw2100_enable_adapter(priv); |
| |
| return err; |
| } |
| |
| static int ipw2100_configure_security(struct ipw2100_priv *priv, int batch_mode) |
| { |
| int i, err, auth_mode, sec_level, use_group; |
| |
| if (!(priv->status & STATUS_RUNNING)) |
| return 0; |
| |
| if (!batch_mode) { |
| err = ipw2100_disable_adapter(priv); |
| if (err) |
| return err; |
| } |
| |
| if (!priv->ieee->sec.enabled) { |
| err = |
| ipw2100_set_security_information(priv, IPW_AUTH_OPEN, |
| SEC_LEVEL_0, 0, 1); |
| } else { |
| auth_mode = IPW_AUTH_OPEN; |
| if (priv->ieee->sec.flags & SEC_AUTH_MODE) { |
| if (priv->ieee->sec.auth_mode == WLAN_AUTH_SHARED_KEY) |
| auth_mode = IPW_AUTH_SHARED; |
| else if (priv->ieee->sec.auth_mode == WLAN_AUTH_LEAP) |
| auth_mode = IPW_AUTH_LEAP_CISCO_ID; |
| } |
| |
| sec_level = SEC_LEVEL_0; |
| if (priv->ieee->sec.flags & SEC_LEVEL) |
| sec_level = priv->ieee->sec.level; |
| |
| use_group = 0; |
| if (priv->ieee->sec.flags & SEC_UNICAST_GROUP) |
| use_group = priv->ieee->sec.unicast_uses_group; |
| |
| err = |
| ipw2100_set_security_information(priv, auth_mode, sec_level, |
| use_group, 1); |
| } |
| |
| if (err) |
| goto exit; |
| |
| if (priv->ieee->sec.enabled) { |
| for (i = 0; i < 4; i++) { |
| if (!(priv->ieee->sec.flags & (1 << i))) { |
| memset(priv->ieee->sec.keys[i], 0, WEP_KEY_LEN); |
| priv->ieee->sec.key_sizes[i] = 0; |
| } else { |
| err = ipw2100_set_key(priv, i, |
| priv->ieee->sec.keys[i], |
| priv->ieee->sec. |
| key_sizes[i], 1); |
| if (err) |
| goto exit; |
| } |
| } |
| |
| ipw2100_set_key_index(priv, priv->ieee->crypt_info.tx_keyidx, 1); |
| } |
| |
| /* Always enable privacy so the Host can filter WEP packets if |
| * encrypted data is sent up */ |
| err = |
| ipw2100_set_wep_flags(priv, |
| priv->ieee->sec. |
| enabled ? IPW_PRIVACY_CAPABLE : 0, 1); |
| if (err) |
| goto exit; |
| |
| priv->status &= ~STATUS_SECURITY_UPDATED; |
| |
| exit: |
| if (!batch_mode) |
| ipw2100_enable_adapter(priv); |
| |
| return err; |
| } |
| |
| static void ipw2100_security_work(struct work_struct *work) |
| { |
| struct ipw2100_priv *priv = |
| container_of(work, struct ipw2100_priv, security_work.work); |
| |
| /* If we happen to have reconnected before we get a chance to |
| * process this, then update the security settings--which causes |
| * a disassociation to occur */ |
| if (!(priv->status & STATUS_ASSOCIATED) && |
| priv->status & STATUS_SECURITY_UPDATED) |
| ipw2100_configure_security(priv, 0); |
| } |
| |
| static void shim__set_security(struct net_device *dev, |
| struct libipw_security *sec) |
| { |
| struct ipw2100_priv *priv = libipw_priv(dev); |
| int i, force_update = 0; |
| |
| mutex_lock(&priv->action_mutex); |
| if (!(priv->status & STATUS_INITIALIZED)) |
| goto done; |
| |
| for (i = 0; i < 4; i++) { |
| if (sec->flags & (1 << i)) { |
| priv->ieee->sec.key_sizes[i] = sec->key_sizes[i]; |
| if (sec->key_sizes[i] == 0) |
| priv->ieee->sec.flags &= ~(1 << i); |
| else |
| memcpy(priv->ieee->sec.keys[i], sec->keys[i], |
| sec->key_sizes[i]); |
| if (sec->level == SEC_LEVEL_1) { |
| priv->ieee->sec.flags |= (1 << i); |
| priv->status |= STATUS_SECURITY_UPDATED; |
| } else |
| priv->ieee->sec.flags &= ~(1 << i); |
| } |
| } |
| |
| if ((sec->flags & SEC_ACTIVE_KEY) && |
| priv->ieee->sec.active_key != sec->active_key) { |
| if (sec->active_key <= 3) { |
| priv->ieee->sec.active_key = sec->active_key; |
| priv->ieee->sec.flags |= SEC_ACTIVE_KEY; |
| } else |
| priv->ieee->sec.flags &= ~SEC_ACTIVE_KEY; |
| |
| priv->status |= STATUS_SECURITY_UPDATED; |
| } |
| |
| if ((sec->flags & SEC_AUTH_MODE) && |
| (priv->ieee->sec.auth_mode != sec->auth_mode)) { |
| priv->ieee->sec.auth_mode = sec->auth_mode; |
| priv->ieee->sec.flags |= SEC_AUTH_MODE; |
| priv->status |= STATUS_SECURITY_UPDATED; |
| } |
| |
| if (sec->flags & SEC_ENABLED && priv->ieee->sec.enabled != sec->enabled) { |
| priv->ieee->sec.flags |= SEC_ENABLED; |
| priv->ieee->sec.enabled = sec->enabled; |
| priv->status |= STATUS_SECURITY_UPDATED; |
| force_update = 1; |
| } |
| |
| if (sec->flags & SEC_ENCRYPT) |
| priv->ieee->sec.encrypt = sec->encrypt; |
| |
| if (sec->flags & SEC_LEVEL && priv->ieee->sec.level != sec->level) { |
| priv->ieee->sec.level = sec->level; |
| priv->ieee->sec.flags |= SEC_LEVEL; |
| priv->status |= STATUS_SECURITY_UPDATED; |
| } |
| |
| IPW_DEBUG_WEP("Security flags: %c %c%c%c%c %c%c%c%c\n", |
| priv->ieee->sec.flags & (1 << 8) ? '1' : '0', |
| priv->ieee->sec.flags & (1 << 7) ? '1' : '0', |
| priv->ieee->sec.flags & (1 << 6) ? '1' : '0', |
| priv->ieee->sec.flags & (1 << 5) ? '1' : '0', |
| priv->ieee->sec.flags & (1 << 4) ? '1' : '0', |
| priv->ieee->sec.flags & (1 << 3) ? '1' : '0', |
| priv->ieee->sec.flags & (1 << 2) ? '1' : '0', |
| priv->ieee->sec.flags & (1 << 1) ? '1' : '0', |
| priv->ieee->sec.flags & (1 << 0) ? '1' : '0'); |
| |
| /* As a temporary work around to enable WPA until we figure out why |
| * wpa_supplicant toggles the security capability of the driver, which |
| * forces a disassocation with force_update... |
| * |
| * if (force_update || !(priv->status & STATUS_ASSOCIATED))*/ |
| if (!(priv->status & (STATUS_ASSOCIATED | STATUS_ASSOCIATING))) |
| ipw2100_configure_security(priv, 0); |
| done: |
| mutex_unlock(&priv->action_mutex); |
| } |
| |
| static int ipw2100_adapter_setup(struct ipw2100_priv *priv) |
| { |
| int err; |
| int batch_mode = 1; |
| u8 *bssid; |
| |
| IPW_DEBUG_INFO("enter\n"); |
| |
| err = ipw2100_disable_adapter(priv); |
| if (err) |
| return err; |
| #ifdef CONFIG_IPW2100_MONITOR |
| if (priv->ieee->iw_mode == IW_MODE_MONITOR) { |
| err = ipw2100_set_channel(priv, priv->channel, batch_mode); |
| if (err) |
| return err; |
| |
| IPW_DEBUG_INFO("exit\n"); |
| |
| return 0; |
| } |
| #endif /* CONFIG_IPW2100_MONITOR */ |
| |
| err = ipw2100_read_mac_address(priv); |
| if (err) |
| return -EIO; |
| |
| err = ipw2100_set_mac_address(priv, batch_mode); |
| if (err) |
| return err; |
| |
| err = ipw2100_set_port_type(priv, priv->ieee->iw_mode, batch_mode); |
| if (err) |
| return err; |
| |
| if (priv->ieee->iw_mode == IW_MODE_ADHOC) { |
| err = ipw2100_set_channel(priv, priv->channel, batch_mode); |
| if (err) |
| return err; |
| } |
| |
| err = ipw2100_system_config(priv, batch_mode); |
| if (err) |
| return err; |
| |
| err = ipw2100_set_tx_rates(priv, priv->tx_rates, batch_mode); |
| if (err) |
| return err; |
| |
| /* Default to power mode OFF */ |
| err = ipw2100_set_power_mode(priv, IPW_POWER_MODE_CAM); |
| if (err) |
| return err; |
| |
| err = ipw2100_set_rts_threshold(priv, priv->rts_threshold); |
| if (err) |
| return err; |
| |
| if (priv->config & CFG_STATIC_BSSID) |
| bssid = priv->bssid; |
| else |
| bssid = NULL; |
| err = ipw2100_set_mandatory_bssid(priv, bssid, batch_mode); |
| if (err) |
| return err; |
| |
| if (priv->config & CFG_STATIC_ESSID) |
| err = ipw2100_set_essid(priv, priv->essid, priv->essid_len, |
| batch_mode); |
| else |
| err = ipw2100_set_essid(priv, NULL, 0, batch_mode); |
| if (err) |
| return err; |
| |
| err = ipw2100_configure_security(priv, batch_mode); |
| if (err) |
| return err; |
| |
| if (priv->ieee->iw_mode == IW_MODE_ADHOC) { |
| err = |
| ipw2100_set_ibss_beacon_interval(priv, |
| priv->beacon_interval, |
| batch_mode); |
| if (err) |
| return err; |
| |
| err = ipw2100_set_tx_power(priv, priv->tx_power); |
| if (err) |
| return err; |
| } |
| |
| /* |
| err = ipw2100_set_fragmentation_threshold( |
| priv, priv->frag_threshold, batch_mode); |
| if (err) |
| return err; |
| */ |
| |
| IPW_DEBUG_INFO("exit\n"); |
| |
| return 0; |
| } |
| |
| /************************************************************************* |
| * |
| * EXTERNALLY CALLED METHODS |
| * |
| *************************************************************************/ |
| |
| /* This method is called by the network layer -- not to be confused with |
| * ipw2100_set_mac_address() declared above called by this driver (and this |
| * method as well) to talk to the firmware */ |
| static int ipw2100_set_address(struct net_device *dev, void *p) |
| { |
| struct ipw2100_priv *priv = libipw_priv(dev); |
| struct sockaddr *addr = p; |
| int err = 0; |
| |
| if (!is_valid_ether_addr(addr->sa_data)) |
| return -EADDRNOTAVAIL; |
| |
| mutex_lock(&priv->action_mutex); |
| |
| priv->config |= CFG_CUSTOM_MAC; |
| memcpy(priv->mac_addr, addr->sa_data, ETH_ALEN); |
| |
| err = ipw2100_set_mac_address(priv, 0); |
| if (err) |
| goto done; |
| |
| priv->reset_backoff = 0; |
| mutex_unlock(&priv->action_mutex); |
| ipw2100_reset_adapter(&priv->reset_work.work); |
| return 0; |
| |
| done: |
| mutex_unlock(&priv->action_mutex); |
| return err; |
| } |
| |
| static int ipw2100_open(struct net_device *dev) |
| { |
| struct ipw2100_priv *priv = libipw_priv(dev); |
| unsigned long flags; |
| IPW_DEBUG_INFO("dev->open\n"); |
| |
| spin_lock_irqsave(&priv->low_lock, flags); |
| if (priv->status & STATUS_ASSOCIATED) { |
| netif_carrier_on(dev); |
| netif_start_queue(dev); |
| } |
| spin_unlock_irqrestore(&priv->low_lock, flags); |
| |
| return 0; |
| } |
| |
| static int ipw2100_close(struct net_device *dev) |
| { |
| struct ipw2100_priv *priv = libipw_priv(dev); |
| unsigned long flags; |
| struct list_head *element; |
| struct ipw2100_tx_packet *packet; |
| |
| IPW_DEBUG_INFO("enter\n"); |
| |
| spin_lock_irqsave(&priv->low_lock, flags); |
| |
| if (priv->status & STATUS_ASSOCIATED) |
| netif_carrier_off(dev); |
| netif_stop_queue(dev); |
| |
| /* Flush the TX queue ... */ |
| while (!list_empty(&priv->tx_pend_list)) { |
| element = priv->tx_pend_list.next; |
| packet = list_entry(element, struct ipw2100_tx_packet, list); |
| |
| list_del(element); |
| DEC_STAT(&priv->tx_pend_stat); |
| |
| libipw_txb_free(packet->info.d_struct.txb); |
| packet->info.d_struct.txb = NULL; |
| |
| list_add_tail(element, &priv->tx_free_list); |
| INC_STAT(&priv->tx_free_stat); |
| } |
| spin_unlock_irqrestore(&priv->low_lock, flags); |
| |
| IPW_DEBUG_INFO("exit\n"); |
| |
| return 0; |
| } |
| |
| /* |
| * TODO: Fix this function... its just wrong |
| */ |
| static void ipw2100_tx_timeout(struct net_device *dev) |
| { |
| struct ipw2100_priv *priv = libipw_priv(dev); |
| |
| dev->stats.tx_errors++; |
| |
| #ifdef CONFIG_IPW2100_MONITOR |
| if (priv->ieee->iw_mode == IW_MODE_MONITOR) |
| return; |
| #endif |
| |
| IPW_DEBUG_INFO("%s: TX timed out. Scheduling firmware restart.\n", |
| dev->name); |
| schedule_reset(priv); |
| } |
| |
| static int ipw2100_wpa_enable(struct ipw2100_priv *priv, int value) |
| { |
| /* This is called when wpa_supplicant loads and closes the driver |
| * interface. */ |
| priv->ieee->wpa_enabled = value; |
| return 0; |
| } |
| |
| static int ipw2100_wpa_set_auth_algs(struct ipw2100_priv *priv, int value) |
| { |
| |
| struct libipw_device *ieee = priv->ieee; |
| struct libipw_security sec = { |
| .flags = SEC_AUTH_MODE, |
| }; |
| int ret = 0; |
| |
| if (value & IW_AUTH_ALG_SHARED_KEY) { |
| sec.auth_mode = WLAN_AUTH_SHARED_KEY; |
| ieee->open_wep = 0; |
| } else if (value & IW_AUTH_ALG_OPEN_SYSTEM) { |
| sec.auth_mode = WLAN_AUTH_OPEN; |
| ieee->open_wep = 1; |
| } else if (value & IW_AUTH_ALG_LEAP) { |
| sec.auth_mode = WLAN_AUTH_LEAP; |
| ieee->open_wep = 1; |
| } else |
| return -EINVAL; |
| |
| if (ieee->set_security) |
| ieee->set_security(ieee->dev, &sec); |
| else |
| ret = -EOPNOTSUPP; |
| |
| return ret; |
| } |
| |
| static void ipw2100_wpa_assoc_frame(struct ipw2100_priv *priv, |
| char *wpa_ie, int wpa_ie_len) |
| { |
| |
| struct ipw2100_wpa_assoc_frame frame; |
| |
| frame.fixed_ie_mask = 0; |
| |
| /* copy WPA IE */ |
| memcpy(frame.var_ie, wpa_ie, wpa_ie_len); |
| frame.var_ie_len = wpa_ie_len; |
| |
| /* make sure WPA is enabled */ |
| ipw2100_wpa_enable(priv, 1); |
| ipw2100_set_wpa_ie(priv, &frame, 0); |
| } |
| |
| static void ipw_ethtool_get_drvinfo(struct net_device *dev, |
| struct ethtool_drvinfo *info) |
| { |
| struct ipw2100_priv *priv = libipw_priv(dev); |
| char fw_ver[64], ucode_ver[64]; |
| |
| strcpy(info->driver, DRV_NAME); |
| strcpy(info->version, DRV_VERSION); |
| |
| ipw2100_get_fwversion(priv, fw_ver, sizeof(fw_ver)); |
| ipw2100_get_ucodeversion(priv, ucode_ver, sizeof(ucode_ver)); |
| |
| snprintf(info->fw_version, sizeof(info->fw_version), "%s:%d:%s", |
| fw_ver, priv->eeprom_version, ucode_ver); |
| |
| strcpy(info->bus_info, pci_name(priv->pci_dev)); |
| } |
| |
| static u32 ipw2100_ethtool_get_link(struct net_device *dev) |
| { |
| struct ipw2100_priv *priv = libipw_priv(dev); |
| return (priv->status & STATUS_ASSOCIATED) ? 1 : 0; |
| } |
| |
| static const struct ethtool_ops ipw2100_ethtool_ops = { |
| .get_link = ipw2100_ethtool_get_link, |
| .get_drvinfo = ipw_ethtool_get_drvinfo, |
| }; |
| |
| static void ipw2100_hang_check(struct work_struct *work) |
| { |
| struct ipw2100_priv *priv = |
| container_of(work, struct ipw2100_priv, hang_check.work); |
| unsigned long flags; |
| u32 rtc = 0xa5a5a5a5; |
| u32 len = sizeof(rtc); |
| int restart = 0; |
| |
| spin_lock_irqsave(&priv->low_lock, flags); |
| |
| if (priv->fatal_error != 0) { |
| /* If fatal_error is set then we need to restart */ |
| IPW_DEBUG_INFO("%s: Hardware fatal error detected.\n", |
| priv->net_dev->name); |
| |
| restart = 1; |
| } else if (ipw2100_get_ordinal(priv, IPW_ORD_RTC_TIME, &rtc, &len) || |
| (rtc == priv->last_rtc)) { |
| /* Check if firmware is hung */ |
| IPW_DEBUG_INFO("%s: Firmware RTC stalled.\n", |
| priv->net_dev->name); |
| |
| restart = 1; |
| } |
| |
| if (restart) { |
| /* Kill timer */ |
| priv->stop_hang_check = 1; |
| priv->hangs++; |
| |
| /* Restart the NIC */ |
| schedule_reset(priv); |
| } |
| |
| priv->last_rtc = rtc; |
| |
| if (!priv->stop_hang_check) |
| schedule_delayed_work(&priv->hang_check, HZ / 2); |
| |
| spin_unlock_irqrestore(&priv->low_lock, flags); |
| } |
| |
| static void ipw2100_rf_kill(struct work_struct *work) |
| { |
| struct ipw2100_priv *priv = |
| container_of(work, struct ipw2100_priv, rf_kill.work); |
| unsigned long flags; |
| |
| spin_lock_irqsave(&priv->low_lock, flags); |
| |
| if (rf_kill_active(priv)) { |
| IPW_DEBUG_RF_KILL("RF Kill active, rescheduling GPIO check\n"); |
| if (!priv->stop_rf_kill) |
| schedule_delayed_work(&priv->rf_kill, |
| round_jiffies_relative(HZ)); |
| goto exit_unlock; |
| } |
| |
| /* RF Kill is now disabled, so bring the device back up */ |
| |
| if (!(priv->status & STATUS_RF_KILL_MASK)) { |
| IPW_DEBUG_RF_KILL("HW RF Kill no longer active, restarting " |
| "device\n"); |
| schedule_reset(priv); |
| } else |
| IPW_DEBUG_RF_KILL("HW RF Kill deactivated. SW RF Kill still " |
| "enabled\n"); |
| |
| exit_unlock: |
| spin_unlock_irqrestore(&priv->low_lock, flags); |
| } |
| |
| static void ipw2100_irq_tasklet(struct ipw2100_priv *priv); |
| |
| static const struct net_device_ops ipw2100_netdev_ops = { |
| .ndo_open = ipw2100_open, |
| .ndo_stop = ipw2100_close, |
| .ndo_start_xmit = libipw_xmit, |
| .ndo_change_mtu = libipw_change_mtu, |
| .ndo_init = ipw2100_net_init, |
| .ndo_tx_timeout = ipw2100_tx_timeout, |
| .ndo_set_mac_address = ipw2100_set_address, |
| .ndo_validate_addr = eth_validate_addr, |
| }; |
| |
| /* Look into using netdev destructor to shutdown libipw? */ |
| |
| static struct net_device *ipw2100_alloc_device(struct pci_dev *pci_dev, |
| void __iomem * base_addr, |
| unsigned long mem_start, |
| unsigned long mem_len) |
| { |
| struct ipw2100_priv *priv; |
| struct net_device *dev; |
| |
| dev = alloc_libipw(sizeof(struct ipw2100_priv), 0); |
| if (!dev) |
| return NULL; |
| priv = libipw_priv(dev); |
| priv->ieee = netdev_priv(dev); |
| priv->pci_dev = pci_dev; |
| priv->net_dev = dev; |
| |
| priv->ieee->hard_start_xmit = ipw2100_tx; |
| priv->ieee->set_security = shim__set_security; |
| |
| priv->ieee->perfect_rssi = -20; |
| priv->ieee->worst_rssi = -85; |
| |
| dev->netdev_ops = &ipw2100_netdev_ops; |
| dev->ethtool_ops = &ipw2100_ethtool_ops; |
| dev->wireless_handlers = &ipw2100_wx_handler_def; |
| priv->wireless_data.libipw = priv->ieee; |
| dev->wireless_data = &priv->wireless_data; |
| dev->watchdog_timeo = 3 * HZ; |
| dev->irq = 0; |
| |
| dev->base_addr = (unsigned long)base_addr; |
| dev->mem_start = mem_start; |
| dev->mem_end = dev->mem_start + mem_len - 1; |
| |
| /* NOTE: We don't use the wireless_handlers hook |
| * in dev as the system will start throwing WX requests |
| * to us before we're actually initialized and it just |
| * ends up causing problems. So, we just handle |
| * the WX extensions through the ipw2100_ioctl interface */ |
| |
| /* memset() puts everything to 0, so we only have explicitly set |
| * those values that need to be something else */ |
| |
| /* If power management is turned on, default to AUTO mode */ |
| priv->power_mode = IPW_POWER_AUTO; |
| |
| #ifdef CONFIG_IPW2100_MONITOR |
| priv->config |= CFG_CRC_CHECK; |
| #endif |
| priv->ieee->wpa_enabled = 0; |
| priv->ieee->drop_unencrypted = 0; |
| priv->ieee->privacy_invoked = 0; |
| priv->ieee->ieee802_1x = 1; |
| |
| /* Set module parameters */ |
| switch (network_mode) { |
| case 1: |
| priv->ieee->iw_mode = IW_MODE_ADHOC; |
| break; |
| #ifdef CONFIG_IPW2100_MONITOR |
| case 2: |
| priv->ieee->iw_mode = IW_MODE_MONITOR; |
| break; |
| #endif |
| default: |
| case 0: |
| priv->ieee->iw_mode = IW_MODE_INFRA; |
| break; |
| } |
| |
| if (disable == 1) |
| priv->status |= STATUS_RF_KILL_SW; |
| |
| if (channel != 0 && |
| ((channel >= REG_MIN_CHANNEL) && (channel <= REG_MAX_CHANNEL))) { |
| priv->config |= CFG_STATIC_CHANNEL; |
| priv->channel = channel; |
| } |
| |
| if (associate) |
| priv->config |= CFG_ASSOCIATE; |
| |
| priv->beacon_interval = DEFAULT_BEACON_INTERVAL; |
| priv->short_retry_limit = DEFAULT_SHORT_RETRY_LIMIT; |
| priv->long_retry_limit = DEFAULT_LONG_RETRY_LIMIT; |
| priv->rts_threshold = DEFAULT_RTS_THRESHOLD | RTS_DISABLED; |
| priv->frag_threshold = DEFAULT_FTS | FRAG_DISABLED; |
| priv->tx_power = IPW_TX_POWER_DEFAULT; |
| priv->tx_rates = DEFAULT_TX_RATES; |
| |
| strcpy(priv->nick, "ipw2100"); |
| |
| spin_lock_init(&priv->low_lock); |
| mutex_init(&priv->action_mutex); |
| mutex_init(&priv->adapter_mutex); |
| |
| init_waitqueue_head(&priv->wait_command_queue); |
| |
| netif_carrier_off(dev); |
| |
| INIT_LIST_HEAD(&priv->msg_free_list); |
| INIT_LIST_HEAD(&priv->msg_pend_list); |
| INIT_STAT(&priv->msg_free_stat); |
| INIT_STAT(&priv->msg_pend_stat); |
| |
| INIT_LIST_HEAD(&priv->tx_free_list); |
| INIT_LIST_HEAD(&priv->tx_pend_list); |
| INIT_STAT(&priv->tx_free_stat); |
| INIT_STAT(&priv->tx_pend_stat); |
| |
| INIT_LIST_HEAD(&priv->fw_pend_list); |
| INIT_STAT(&priv->fw_pend_stat); |
| |
| INIT_DELAYED_WORK(&priv->reset_work, ipw2100_reset_adapter); |
| INIT_DELAYED_WORK(&priv->security_work, ipw2100_security_work); |
| INIT_DELAYED_WORK(&priv->wx_event_work, ipw2100_wx_event_work); |
| INIT_DELAYED_WORK(&priv->hang_check, ipw2100_hang_check); |
| INIT_DELAYED_WORK(&priv->rf_kill, ipw2100_rf_kill); |
| INIT_WORK(&priv->scan_event_now, ipw2100_scan_event_now); |
| INIT_DELAYED_WORK(&priv->scan_event_later, ipw2100_scan_event_later); |
| |
| tasklet_init(&priv->irq_tasklet, (void (*)(unsigned long)) |
| ipw2100_irq_tasklet, (unsigned long)priv); |
| |
| /* NOTE: We do not start the deferred work for status checks yet */ |
| priv->stop_rf_kill = 1; |
| priv->stop_hang_check = 1; |
| |
| return dev; |
| } |
| |
| static int ipw2100_pci_init_one(struct pci_dev *pci_dev, |
| const struct pci_device_id *ent) |
| { |
| unsigned long mem_start, mem_len, mem_flags; |
| void __iomem *base_addr = NULL; |
| struct net_device *dev = NULL; |
| struct ipw2100_priv *priv = NULL; |
| int err = 0; |
| int registered = 0; |
| u32 val; |
| |
| IPW_DEBUG_INFO("enter\n"); |
| |
| mem_start = pci_resource_start(pci_dev, 0); |
| mem_len = pci_resource_len(pci_dev, 0); |
| mem_flags = pci_resource_flags(pci_dev, 0); |
| |
| if ((mem_flags & IORESOURCE_MEM) != IORESOURCE_MEM) { |
| IPW_DEBUG_INFO("weird - resource type is not memory\n"); |
| err = -ENODEV; |
| goto fail; |
| } |
| |
| base_addr = ioremap_nocache(mem_start, mem_len); |
| if (!base_addr) { |
| printk(KERN_WARNING DRV_NAME |
| "Error calling ioremap_nocache.\n"); |
| err = -EIO; |
| goto fail; |
| } |
| |
| /* allocate and initialize our net_device */ |
| dev = ipw2100_alloc_device(pci_dev, base_addr, mem_start, mem_len); |
| if (!dev) { |
| printk(KERN_WARNING DRV_NAME |
| "Error calling ipw2100_alloc_device.\n"); |
| err = -ENOMEM; |
| goto fail; |
| } |
| |
| /* set up PCI mappings for device */ |
| err = pci_enable_device(pci_dev); |
| if (err) { |
| printk(KERN_WARNING DRV_NAME |
| "Error calling pci_enable_device.\n"); |
| return err; |
| } |
| |
| priv = libipw_priv(dev); |
| |
| pci_set_master(pci_dev); |
| pci_set_drvdata(pci_dev, priv); |
| |
| err = pci_set_dma_mask(pci_dev, DMA_BIT_MASK(32)); |
| if (err) { |
| printk(KERN_WARNING DRV_NAME |
| "Error calling pci_set_dma_mask.\n"); |
| pci_disable_device(pci_dev); |
| return err; |
| } |
| |
| err = pci_request_regions(pci_dev, DRV_NAME); |
| if (err) { |
| printk(KERN_WARNING DRV_NAME |
| "Error calling pci_request_regions.\n"); |
| pci_disable_device(pci_dev); |
| return err; |
| } |
| |
| /* We disable the RETRY_TIMEOUT register (0x41) to keep |
| * PCI Tx retries from interfering with C3 CPU state */ |
| pci_read_config_dword(pci_dev, 0x40, &val); |
| if ((val & 0x0000ff00) != 0) |
| pci_write_config_dword(pci_dev, 0x40, val & 0xffff00ff); |
| |
| pci_set_power_state(pci_dev, PCI_D0); |
| |
| if (!ipw2100_hw_is_adapter_in_system(dev)) { |
| printk(KERN_WARNING DRV_NAME |
| "Device not found via register read.\n"); |
| err = -ENODEV; |
| goto fail; |
| } |
| |
| SET_NETDEV_DEV(dev, &pci_dev->dev); |
| |
| /* Force interrupts to be shut off on the device */ |
| priv->status |= STATUS_INT_ENABLED; |
| ipw2100_disable_interrupts(priv); |
| |
| /* Allocate and initialize the Tx/Rx queues and lists */ |
| if (ipw2100_queues_allocate(priv)) { |
| printk(KERN_WARNING DRV_NAME |
| "Error calling ipw2100_queues_allocate.\n"); |
| err = -ENOMEM; |
| goto fail; |
| } |
| ipw2100_queues_initialize(priv); |
| |
| err = request_irq(pci_dev->irq, |
| ipw2100_interrupt, IRQF_SHARED, dev->name, priv); |
| if (err) { |
| printk(KERN_WARNING DRV_NAME |
| "Error calling request_irq: %d.\n", pci_dev->irq); |
| goto fail; |
| } |
| dev->irq = pci_dev->irq; |
| |
| IPW_DEBUG_INFO("Attempting to register device...\n"); |
| |
| printk(KERN_INFO DRV_NAME |
| ": Detected Intel PRO/Wireless 2100 Network Connection\n"); |
| |
| /* Bring up the interface. Pre 0.46, after we registered the |
| * network device we would call ipw2100_up. This introduced a race |
| * condition with newer hotplug configurations (network was coming |
| * up and making calls before the device was initialized). |
| * |
| * If we called ipw2100_up before we registered the device, then the |
| * device name wasn't registered. So, we instead use the net_dev->init |
| * member to call a function that then just turns and calls ipw2100_up. |
| * net_dev->init is called after name allocation but before the |
| * notifier chain is called */ |
| err = register_netdev(dev); |
| if (err) { |
| printk(KERN_WARNING DRV_NAME |
| "Error calling register_netdev.\n"); |
| goto fail; |
| } |
| |
| mutex_lock(&priv->action_mutex); |
| registered = 1; |
| |
| IPW_DEBUG_INFO("%s: Bound to %s\n", dev->name, pci_name(pci_dev)); |
| |
| /* perform this after register_netdev so that dev->name is set */ |
| err = sysfs_create_group(&pci_dev->dev.kobj, &ipw2100_attribute_group); |
| if (err) |
| goto fail_unlock; |
| |
| /* If the RF Kill switch is disabled, go ahead and complete the |
| * startup sequence */ |
| if (!(priv->status & STATUS_RF_KILL_MASK)) { |
| /* Enable the adapter - sends HOST_COMPLETE */ |
| if (ipw2100_enable_adapter(priv)) { |
| printk(KERN_WARNING DRV_NAME |
| ": %s: failed in call to enable adapter.\n", |
| priv->net_dev->name); |
| ipw2100_hw_stop_adapter(priv); |
| err = -EIO; |
| goto fail_unlock; |
| } |
| |
| /* Start a scan . . . */ |
| ipw2100_set_scan_options(priv); |
| ipw2100_start_scan(priv); |
| } |
| |
| IPW_DEBUG_INFO("exit\n"); |
| |
| priv->status |= STATUS_INITIALIZED; |
| |
| mutex_unlock(&priv->action_mutex); |
| |
| return 0; |
| |
| fail_unlock: |
| mutex_unlock(&priv->action_mutex); |
| |
| fail: |
| if (dev) { |
| if (registered) |
| unregister_netdev(dev); |
| |
| ipw2100_hw_stop_adapter(priv); |
| |
| ipw2100_disable_interrupts(priv); |
| |
| if (dev->irq) |
| free_irq(dev->irq, priv); |
| |
| ipw2100_kill_works(priv); |
| |
| /* These are safe to call even if they weren't allocated */ |
| ipw2100_queues_free(priv); |
| sysfs_remove_group(&pci_dev->dev.kobj, |
| &ipw2100_attribute_group); |
| |
| free_libipw(dev, 0); |
| pci_set_drvdata(pci_dev, NULL); |
| } |
| |
| if (base_addr) |
| iounmap(base_addr); |
| |
| pci_release_regions(pci_dev); |
| pci_disable_device(pci_dev); |
| |
| return err; |
| } |
| |
| static void __devexit ipw2100_pci_remove_one(struct pci_dev *pci_dev) |
| { |
| struct ipw2100_priv *priv = pci_get_drvdata(pci_dev); |
| struct net_device *dev; |
| |
| if (priv) { |
| mutex_lock(&priv->action_mutex); |
| |
| priv->status &= ~STATUS_INITIALIZED; |
| |
| dev = priv->net_dev; |
| sysfs_remove_group(&pci_dev->dev.kobj, |
| &ipw2100_attribute_group); |
| |
| #ifdef CONFIG_PM |
| if (ipw2100_firmware.version) |
| ipw2100_release_firmware(priv, &ipw2100_firmware); |
| #endif |
| /* Take down the hardware */ |
| ipw2100_down(priv); |
| |
| /* Release the mutex so that the network subsystem can |
| * complete any needed calls into the driver... */ |
| mutex_unlock(&priv->action_mutex); |
| |
| /* Unregister the device first - this results in close() |
| * being called if the device is open. If we free storage |
| * first, then close() will crash. */ |
| unregister_netdev(dev); |
| |
| ipw2100_kill_works(priv); |
| |
| ipw2100_queues_free(priv); |
| |
| /* Free potential debugging firmware snapshot */ |
| ipw2100_snapshot_free(priv); |
| |
| if (dev->irq) |
| free_irq(dev->irq, priv); |
| |
| if (dev->base_addr) |
| iounmap((void __iomem *)dev->base_addr); |
| |
| /* wiphy_unregister needs to be here, before free_libipw */ |
| wiphy_unregister(priv->ieee->wdev.wiphy); |
| kfree(priv->ieee->bg_band.channels); |
| free_libipw(dev, 0); |
| } |
| |
| pci_release_regions(pci_dev); |
| pci_disable_device(pci_dev); |
| |
| IPW_DEBUG_INFO("exit\n"); |
| } |
| |
| #ifdef CONFIG_PM |
| static int ipw2100_suspend(struct pci_dev *pci_dev, pm_message_t state) |
| { |
| struct ipw2100_priv *priv = pci_get_drvdata(pci_dev); |
| struct net_device *dev = priv->net_dev; |
| |
| IPW_DEBUG_INFO("%s: Going into suspend...\n", dev->name); |
| |
| mutex_lock(&priv->action_mutex); |
| if (priv->status & STATUS_INITIALIZED) { |
| /* Take down the device; powers it off, etc. */ |
| ipw2100_down(priv); |
| } |
| |
| /* Remove the PRESENT state of the device */ |
| netif_device_detach(dev); |
| |
| pci_save_state(pci_dev); |
| pci_disable_device(pci_dev); |
| pci_set_power_state(pci_dev, PCI_D3hot); |
| |
| priv->suspend_at = get_seconds(); |
| |
| mutex_unlock(&priv->action_mutex); |
| |
| return 0; |
| } |
| |
| static int ipw2100_resume(struct pci_dev *pci_dev) |
| { |
| struct ipw2100_priv *priv = pci_get_drvdata(pci_dev); |
| struct net_device *dev = priv->net_dev; |
| int err; |
| u32 val; |
| |
| if (IPW2100_PM_DISABLED) |
| return 0; |
| |
| mutex_lock(&priv->action_mutex); |
| |
| IPW_DEBUG_INFO("%s: Coming out of suspend...\n", dev->name); |
| |
| pci_set_power_state(pci_dev, PCI_D0); |
| err = pci_enable_device(pci_dev); |
| if (err) { |
| printk(KERN_ERR "%s: pci_enable_device failed on resume\n", |
| dev->name); |
| mutex_unlock(&priv->action_mutex); |
| return err; |
| } |
| pci_restore_state(pci_dev); |
| |
| /* |
| * Suspend/Resume resets the PCI configuration space, so we have to |
| * re-disable the RETRY_TIMEOUT register (0x41) to keep PCI Tx retries |
| * from interfering with C3 CPU state. pci_restore_state won't help |
| * here since it only restores the first 64 bytes pci config header. |
| */ |
| pci_read_config_dword(pci_dev, 0x40, &val); |
| if ((val & 0x0000ff00) != 0) |
| pci_write_config_dword(pci_dev, 0x40, val & 0xffff00ff); |
| |
| /* Set the device back into the PRESENT state; this will also wake |
| * the queue of needed */ |
| netif_device_attach(dev); |
| |
| priv->suspend_time = get_seconds() - priv->suspend_at; |
| |
| /* Bring the device back up */ |
| if (!(priv->status & STATUS_RF_KILL_SW)) |
| ipw2100_up(priv, 0); |
| |
| mutex_unlock(&priv->action_mutex); |
| |
| return 0; |
| } |
| #endif |
| |
| static void ipw2100_shutdown(struct pci_dev *pci_dev) |
| { |
| struct ipw2100_priv *priv = pci_get_drvdata(pci_dev); |
| |
| /* Take down the device; powers it off, etc. */ |
| ipw2100_down(priv); |
| |
| pci_disable_device(pci_dev); |
| } |
| |
| #define IPW2100_DEV_ID(x) { PCI_VENDOR_ID_INTEL, 0x1043, 0x8086, x } |
| |
| static DEFINE_PCI_DEVICE_TABLE(ipw2100_pci_id_table) = { |
| IPW2100_DEV_ID(0x2520), /* IN 2100A mPCI 3A */ |
| IPW2100_DEV_ID(0x2521), /* IN 2100A mPCI 3B */ |
| IPW2100_DEV_ID(0x2524), /* IN 2100A mPCI 3B */ |
| IPW2100_DEV_ID(0x2525), /* IN 2100A mPCI 3B */ |
| IPW2100_DEV_ID(0x2526), /* IN 2100A mPCI Gen A3 */ |
| IPW2100_DEV_ID(0x2522), /* IN 2100 mPCI 3B */ |
| IPW2100_DEV_ID(0x2523), /* IN 2100 mPCI 3A */ |
| IPW2100_DEV_ID(0x2527), /* IN 2100 mPCI 3B */ |
| IPW2100_DEV_ID(0x2528), /* IN 2100 mPCI 3B */ |
| IPW2100_DEV_ID(0x2529), /* IN 2100 mPCI 3B */ |
| IPW2100_DEV_ID(0x252B), /* IN 2100 mPCI 3A */ |
| IPW2100_DEV_ID(0x252C), /* IN 2100 mPCI 3A */ |
| IPW2100_DEV_ID(0x252D), /* IN 2100 mPCI 3A */ |
| |
| IPW2100_DEV_ID(0x2550), /* IB 2100A mPCI 3B */ |
| IPW2100_DEV_ID(0x2551), /* IB 2100 mPCI 3B */ |
| IPW2100_DEV_ID(0x2553), /* IB 2100 mPCI 3B */ |
| IPW2100_DEV_ID(0x2554), /* IB 2100 mPCI 3B */ |
| IPW2100_DEV_ID(0x2555), /* IB 2100 mPCI 3B */ |
| |
| IPW2100_DEV_ID(0x2560), /* DE 2100A mPCI 3A */ |
| IPW2100_DEV_ID(0x2562), /* DE 2100A mPCI 3A */ |
| IPW2100_DEV_ID(0x2563), /* DE 2100A mPCI 3A */ |
| IPW2100_DEV_ID(0x2561), /* DE 2100 mPCI 3A */ |
| IPW2100_DEV_ID(0x2565), /* DE 2100 mPCI 3A */ |
| IPW2100_DEV_ID(0x2566), /* DE 2100 mPCI 3A */ |
| IPW2100_DEV_ID(0x2567), /* DE 2100 mPCI 3A */ |
| |
| IPW2100_DEV_ID(0x2570), /* GA 2100 mPCI 3B */ |
| |
| IPW2100_DEV_ID(0x2580), /* TO 2100A mPCI 3B */ |
| IPW2100_DEV_ID(0x2582), /* TO 2100A mPCI 3B */ |
| IPW2100_DEV_ID(0x2583), /* TO 2100A mPCI 3B */ |
| IPW2100_DEV_ID(0x2581), /* TO 2100 mPCI 3B */ |
| IPW2100_DEV_ID(0x2585), /* TO 2100 mPCI 3B */ |
| IPW2100_DEV_ID(0x2586), /* TO 2100 mPCI 3B */ |
| IPW2100_DEV_ID(0x2587), /* TO 2100 mPCI 3B */ |
| |
| IPW2100_DEV_ID(0x2590), /* SO 2100A mPCI 3B */ |
| IPW2100_DEV_ID(0x2592), /* SO 2100A mPCI 3B */ |
| IPW2100_DEV_ID(0x2591), /* SO 2100 mPCI 3B */ |
| IPW2100_DEV_ID(0x2593), /* SO 2100 mPCI 3B */ |
| IPW2100_DEV_ID(0x2596), /* SO 2100 mPCI 3B */ |
| IPW2100_DEV_ID(0x2598), /* SO 2100 mPCI 3B */ |
| |
| IPW2100_DEV_ID(0x25A0), /* HP 2100 mPCI 3B */ |
| {0,}, |
| }; |
| |
| MODULE_DEVICE_TABLE(pci, ipw2100_pci_id_table); |
| |
| static struct pci_driver ipw2100_pci_driver = { |
| .name = DRV_NAME, |
| .id_table = ipw2100_pci_id_table, |
| .probe = ipw2100_pci_init_one, |
| .remove = __devexit_p(ipw2100_pci_remove_one), |
| #ifdef CONFIG_PM |
| .suspend = ipw2100_suspend, |
| .resume = ipw2100_resume, |
| #endif |
| .shutdown = ipw2100_shutdown, |
| }; |
| |
| /** |
| * Initialize the ipw2100 driver/module |
| * |
| * @returns 0 if ok, < 0 errno node con error. |
| * |
| * Note: we cannot init the /proc stuff until the PCI driver is there, |
| * or we risk an unlikely race condition on someone accessing |
| * uninitialized data in the PCI dev struct through /proc. |
| */ |
| static int __init ipw2100_init(void) |
| { |
| int ret; |
| |
| printk(KERN_INFO DRV_NAME ": %s, %s\n", DRV_DESCRIPTION, DRV_VERSION); |
| printk(KERN_INFO DRV_NAME ": %s\n", DRV_COPYRIGHT); |
| |
| pm_qos_add_request(&ipw2100_pm_qos_req, PM_QOS_CPU_DMA_LATENCY, |
| PM_QOS_DEFAULT_VALUE); |
| |
| ret = pci_register_driver(&ipw2100_pci_driver); |
| if (ret) |
| goto out; |
| |
| #ifdef CONFIG_IPW2100_DEBUG |
| ipw2100_debug_level = debug; |
| ret = driver_create_file(&ipw2100_pci_driver.driver, |
| &driver_attr_debug_level); |
| #endif |
| |
| out: |
| return ret; |
| } |
| |
| /** |
| * Cleanup ipw2100 driver registration |
| */ |
| static void __exit ipw2100_exit(void) |
| { |
| /* FIXME: IPG: check that we have no instances of the devices open */ |
| #ifdef CONFIG_IPW2100_DEBUG |
| driver_remove_file(&ipw2100_pci_driver.driver, |
| &driver_attr_debug_level); |
| #endif |
| pci_unregister_driver(&ipw2100_pci_driver); |
| pm_qos_remove_request(&ipw2100_pm_qos_req); |
| } |
| |
| module_init(ipw2100_init); |
| module_exit(ipw2100_exit); |
| |
| static int ipw2100_wx_get_name(struct net_device *dev, |
| struct iw_request_info *info, |
| union iwreq_data *wrqu, char *extra) |
| { |
| /* |
| * This can be called at any time. No action lock required |
| */ |
| |
| struct ipw2100_priv *priv = libipw_priv(dev); |
| if (!(priv->status & STATUS_ASSOCIATED)) |
| strcpy(wrqu->name, "unassociated"); |
| else |
| snprintf(wrqu->name, IFNAMSIZ, "IEEE 802.11b"); |
| |
| IPW_DEBUG_WX("Name: %s\n", wrqu->name); |
| return 0; |
| } |
| |
| static int ipw2100_wx_set_freq(struct net_device *dev, |
| struct iw_request_info *info, |
| union iwreq_data *wrqu, char *extra) |
| { |
| struct ipw2100_priv *priv = libipw_priv(dev); |
| struct iw_freq *fwrq = &wrqu->freq; |
| int err = 0; |
| |
| if (priv->ieee->iw_mode == IW_MODE_INFRA) |
| return -EOPNOTSUPP; |
| |
| mutex_lock(&priv->action_mutex); |
| if (!(priv->status & STATUS_INITIALIZED)) { |
| err = -EIO; |
| goto done; |
| } |
| |
| /* if setting by freq convert to channel */ |
| if (fwrq->e == 1) { |
| if ((fwrq->m >= (int)2.412e8 && fwrq->m <= (int)2.487e8)) { |
| int f = fwrq->m / 100000; |
| int c = 0; |
| |
| while ((c < REG_MAX_CHANNEL) && |
| (f != ipw2100_frequencies[c])) |
| c++; |
| |
| /* hack to fall through */ |
| fwrq->e = 0; |
| fwrq->m = c + 1; |
| } |
| } |
| |
| if (fwrq->e > 0 || fwrq->m > 1000) { |
| err = -EOPNOTSUPP; |
| goto done; |
| } else { /* Set the channel */ |
| IPW_DEBUG_WX("SET Freq/Channel -> %d\n", fwrq->m); |
| err = ipw2100_set_channel(priv, fwrq->m, 0); |
| } |
| |
| done: |
| mutex_unlock(&priv->action_mutex); |
| return err; |
| } |
| |
| static int ipw2100_wx_get_freq(struct net_device *dev, |
| struct iw_request_info *info, |
| union iwreq_data *wrqu, char *extra) |
| { |
| /* |
| * This can be called at any time. No action lock required |
| */ |
| |
| struct ipw2100_priv *priv = libipw_priv(dev); |
| |
| wrqu->freq.e = 0; |
| |
| /* If we are associated, trying to associate, or have a statically |
| * configured CHANNEL then return that; otherwise return ANY */ |
| if (priv->config & CFG_STATIC_CHANNEL || |
| priv->status & STATUS_ASSOCIATED) |
| wrqu->freq.m = priv->channel; |
| else |
| wrqu->freq.m = 0; |
| |
| IPW_DEBUG_WX("GET Freq/Channel -> %d\n", priv->channel); |
| return 0; |
| |
| } |
| |
| static int ipw2100_wx_set_mode(struct net_device *dev, |
| struct iw_request_info *info, |
| union iwreq_data *wrqu, char *extra) |
| { |
| struct ipw2100_priv *priv = libipw_priv(dev); |
| int err = 0; |
| |
| IPW_DEBUG_WX("SET Mode -> %d\n", wrqu->mode); |
| |
| if (wrqu->mode == priv->ieee->iw_mode) |
| return 0; |
| |
| mutex_lock(&priv->action_mutex); |
| if (!(priv->status & STATUS_INITIALIZED)) { |
| err = -EIO; |
| goto done; |
| } |
| |
| switch (wrqu->mode) { |
| #ifdef CONFIG_IPW2100_MONITOR |
| case IW_MODE_MONITOR: |
| err = ipw2100_switch_mode(priv, IW_MODE_MONITOR); |
| break; |
| #endif /* CONFIG_IPW2100_MONITOR */ |
| case IW_MODE_ADHOC: |
| err = ipw2100_switch_mode(priv, IW_MODE_ADHOC); |
| break; |
| case IW_MODE_INFRA: |
| case IW_MODE_AUTO: |
| default: |
| err = ipw2100_switch_mode(priv, IW_MODE_INFRA); |
| break; |
| } |
| |
| done: |
| mutex_unlock(&priv->action_mutex); |
| return err; |
| } |
| |
| static int ipw2100_wx_get_mode(struct net_device *dev, |
| struct iw_request_info *info, |
| union iwreq_data *wrqu, char *extra) |
| { |
| /* |
| * This can be called at any time. No action lock required |
| */ |
| |
| struct ipw2100_priv *priv = libipw_priv(dev); |
| |
| wrqu->mode = priv->ieee->iw_mode; |
| IPW_DEBUG_WX("GET Mode -> %d\n", wrqu->mode); |
| |
| return 0; |
| } |
| |
| #define POWER_MODES 5 |
| |
| /* Values are in microsecond */ |
| static const s32 timeout_duration[POWER_MODES] = { |
| 350000, |
| 250000, |
| 75000, |
| 37000, |
| 25000, |
| }; |
| |
| static const s32 period_duration[POWER_MODES] = { |
| 400000, |
| 700000, |
| 1000000, |
| 1000000, |
| 1000000 |
| }; |
| |
| static int ipw2100_wx_get_range(struct net_device *dev, |
| struct iw_request_info *info, |
| union iwreq_data *wrqu, char *extra) |
| { |
| /* |
| * This can be called at any time. No action lock required |
| */ |
| |
| struct ipw2100_priv *priv = libipw_priv(dev); |
| struct iw_range *range = (struct iw_range *)extra; |
| u16 val; |
| int i, level; |
| |
| wrqu->data.length = sizeof(*range); |
| memset(range, 0, sizeof(*range)); |
| |
| /* Let's try to keep this struct in the same order as in |
| * linux/include/wireless.h |
| */ |
| |
| /* TODO: See what values we can set, and remove the ones we can't |
| * set, or fill them with some default data. |
| */ |
| |
| /* ~5 Mb/s real (802.11b) */ |
| range->throughput = 5 * 1000 * 1000; |
| |
| // range->sensitivity; /* signal level threshold range */ |
| |
| range->max_qual.qual = 100; |
| /* TODO: Find real max RSSI and stick here */ |
| range->max_qual.level = 0; |
| range->max_qual.noise = 0; |
| range->max_qual.updated = 7; /* Updated all three */ |
| |
| range->avg_qual.qual = 70; /* > 8% missed beacons is 'bad' */ |
| /* TODO: Find real 'good' to 'bad' threshold value for RSSI */ |
| range->avg_qual.level = 20 + IPW2100_RSSI_TO_DBM; |
| range->avg_qual.noise = 0; |
| range->avg_qual.updated = 7; /* Updated all three */ |
| |
| range->num_bitrates = RATE_COUNT; |
| |
| for (i = 0; i < RATE_COUNT && i < IW_MAX_BITRATES; i++) { |
| range->bitrate[i] = ipw2100_rates_11b[i]; |
| } |
| |
| range->min_rts = MIN_RTS_THRESHOLD; |
| range->max_rts = MAX_RTS_THRESHOLD; |
| range->min_frag = MIN_FRAG_THRESHOLD; |
| range->max_frag = MAX_FRAG_THRESHOLD; |
| |
| range->min_pmp = period_duration[0]; /* Minimal PM period */ |
| range->max_pmp = period_duration[POWER_MODES - 1]; /* Maximal PM period */ |
| range->min_pmt = timeout_duration[POWER_MODES - 1]; /* Minimal PM timeout */ |
| range->max_pmt = timeout_duration[0]; /* Maximal PM timeout */ |
| |
| /* How to decode max/min PM period */ |
| range->pmp_flags = IW_POWER_PERIOD; |
| /* How to decode max/min PM period */ |
| range->pmt_flags = IW_POWER_TIMEOUT; |
| /* What PM options are supported */ |
| range->pm_capa = IW_POWER_TIMEOUT | IW_POWER_PERIOD; |
| |
| range->encoding_size[0] = 5; |
| range->encoding_size[1] = 13; /* Different token sizes */ |
| range->num_encoding_sizes = 2; /* Number of entry in the list */ |
| range->max_encoding_tokens = WEP_KEYS; /* Max number of tokens */ |
| // range->encoding_login_index; /* token index for login token */ |
| |
| if (priv->ieee->iw_mode == IW_MODE_ADHOC) { |
| range->txpower_capa = IW_TXPOW_DBM; |
| range->num_txpower = IW_MAX_TXPOWER; |
| for (i = 0, level = (IPW_TX_POWER_MAX_DBM * 16); |
| i < IW_MAX_TXPOWER; |
| i++, level -= |
| ((IPW_TX_POWER_MAX_DBM - |
| IPW_TX_POWER_MIN_DBM) * 16) / (IW_MAX_TXPOWER - 1)) |
| range->txpower[i] = level / 16; |
| } else { |
| range->txpower_capa = 0; |
| range->num_txpower = 0; |
| } |
| |
| /* Set the Wireless Extension versions */ |
| range->we_version_compiled = WIRELESS_EXT; |
| range->we_version_source = 18; |
| |
| // range->retry_capa; /* What retry options are supported */ |
| // range->retry_flags; /* How to decode max/min retry limit */ |
| // range->r_time_flags; /* How to decode max/min retry life */ |
| // range->min_retry; /* Minimal number of retries */ |
| // range->max_retry; /* Maximal number of retries */ |
| // range->min_r_time; /* Minimal retry lifetime */ |
| // range->max_r_time; /* Maximal retry lifetime */ |
| |
| range->num_channels = FREQ_COUNT; |
| |
| val = 0; |
| for (i = 0; i < FREQ_COUNT; i++) { |
| // TODO: Include only legal frequencies for some countries |
| // if (local->channel_mask & (1 << i)) { |
| range->freq[val].i = i + 1; |
| range->freq[val].m = ipw2100_frequencies[i] * 100000; |
| range->freq[val].e = 1; |
| val++; |
| // } |
| if (val == IW_MAX_FREQUENCIES) |
| break; |
| } |
| range->num_frequency = val; |
| |
| /* Event capability (kernel + driver) */ |
| range->event_capa[0] = (IW_EVENT_CAPA_K_0 | |
| IW_EVENT_CAPA_MASK(SIOCGIWAP)); |
| range->event_capa[1] = IW_EVENT_CAPA_K_1; |
| |
| range->enc_capa = IW_ENC_CAPA_WPA | IW_ENC_CAPA_WPA2 | |
| IW_ENC_CAPA_CIPHER_TKIP | IW_ENC_CAPA_CIPHER_CCMP; |
| |
| IPW_DEBUG_WX("GET Range\n"); |
| |
| return 0; |
| } |
| |
| static int ipw2100_wx_set_wap(struct net_device *dev, |
| struct iw_request_info *info, |
| union iwreq_data *wrqu, char *extra) |
| { |
| struct ipw2100_priv *priv = libipw_priv(dev); |
| int err = 0; |
| |
| static const unsigned char any[] = { |
| 0xff, 0xff, 0xff, 0xff, 0xff, 0xff |
| }; |
| static const unsigned char off[] = { |
| 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 |
| }; |
| |
| // sanity checks |
| if (wrqu->ap_addr.sa_family != ARPHRD_ETHER) |
| return -EINVAL; |
| |
| mutex_lock(&priv->action_mutex); |
| if (!(priv->status & STATUS_INITIALIZED)) { |
| err = -EIO; |
| goto done; |
| } |
| |
| if (!memcmp(any, wrqu->ap_addr.sa_data, ETH_ALEN) || |
| !memcmp(off, wrqu->ap_addr.sa_data, ETH_ALEN)) { |
| /* we disable mandatory BSSID association */ |
| IPW_DEBUG_WX("exit - disable mandatory BSSID\n"); |
| priv->config &= ~CFG_STATIC_BSSID; |
| err = ipw2100_set_mandatory_bssid(priv, NULL, 0); |
| goto done; |
| } |
| |
| priv->config |= CFG_STATIC_BSSID; |
| memcpy(priv->mandatory_bssid_mac, wrqu->ap_addr.sa_data, ETH_ALEN); |
| |
| err = ipw2100_set_mandatory_bssid(priv, wrqu->ap_addr.sa_data, 0); |
| |
| IPW_DEBUG_WX("SET BSSID -> %pM\n", wrqu->ap_addr.sa_data); |
| |
| done: |
| mutex_unlock(&priv->action_mutex); |
| return err; |
| } |
| |
| static int ipw2100_wx_get_wap(struct net_device *dev, |
| struct iw_request_info *info, |
| union iwreq_data *wrqu, char *extra) |
| { |
| /* |
| * This can be called at any time. No action lock required |
| */ |
| |
| struct ipw2100_priv *priv = libipw_priv(dev); |
| |
| /* If we are associated, trying to associate, or have a statically |
| * configured BSSID then return that; otherwise return ANY */ |
| if (priv->config & CFG_STATIC_BSSID || priv->status & STATUS_ASSOCIATED) { |
| wrqu->ap_addr.sa_family = ARPHRD_ETHER; |
| memcpy(wrqu->ap_addr.sa_data, priv->bssid, ETH_ALEN); |
| } else |
| memset(wrqu->ap_addr.sa_data, 0, ETH_ALEN); |
| |
| IPW_DEBUG_WX("Getting WAP BSSID: %pM\n", wrqu->ap_addr.sa_data); |
| return 0; |
| } |
| |
| static int ipw2100_wx_set_essid(struct net_device *dev, |
| struct iw_request_info *info, |
| union iwreq_data *wrqu, char *extra) |
| { |
| struct ipw2100_priv *priv = libipw_priv(dev); |
| char *essid = ""; /* ANY */ |
| int length = 0; |
| int err = 0; |
| DECLARE_SSID_BUF(ssid); |
| |
| mutex_lock(&priv->action_mutex); |
| if (!(priv->status & STATUS_INITIALIZED)) { |
| err = -EIO; |
| goto done; |
| } |
| |
| if (wrqu->essid.flags && wrqu->essid.length) { |
| length = wrqu->essid.length; |
| essid = extra; |
| } |
| |
| if (length == 0) { |
| IPW_DEBUG_WX("Setting ESSID to ANY\n"); |
| priv->config &= ~CFG_STATIC_ESSID; |
| err = ipw2100_set_essid(priv, NULL, 0, 0); |
| goto done; |
| } |
| |
| length = min(length, IW_ESSID_MAX_SIZE); |
| |
| priv->config |= CFG_STATIC_ESSID; |
| |
| if (priv->essid_len == length && !memcmp(priv->essid, extra, length)) { |
| IPW_DEBUG_WX("ESSID set to current ESSID.\n"); |
| err = 0; |
| goto done; |
| } |
| |
| IPW_DEBUG_WX("Setting ESSID: '%s' (%d)\n", |
| print_ssid(ssid, essid, length), length); |
| |
| priv->essid_len = length; |
| memcpy(priv->essid, essid, priv->essid_len); |
| |
| err = ipw2100_set_essid(priv, essid, length, 0); |
| |
| done: |
| mutex_unlock(&priv->action_mutex); |
| return err; |
| } |
| |
| static int ipw2100_wx_get_essid(struct net_device *dev, |
| struct iw_request_info *info, |
| union iwreq_data *wrqu, char *extra) |
| { |
| /* |
| * This can be called at any time. No action lock required |
| */ |
| |
| struct ipw2100_priv *priv = libipw_priv(dev); |
| DECLARE_SSID_BUF(ssid); |
| |
| /* If we are associated, trying to associate, or have a statically |
| * configured ESSID then return that; otherwise return ANY */ |
| if (priv->config & CFG_STATIC_ESSID || priv->status & STATUS_ASSOCIATED) { |
| IPW_DEBUG_WX("Getting essid: '%s'\n", |
| print_ssid(ssid, priv->essid, priv->essid_len)); |
| memcpy(extra, priv->essid, priv->essid_len); |
| wrqu->essid.length = priv->essid_len; |
| wrqu->essid.flags = 1; /* active */ |
| } else { |
| IPW_DEBUG_WX("Getting essid: ANY\n"); |
| wrqu->essid.length = 0; |
| wrqu->essid.flags = 0; /* active */ |
| } |
| |
| return 0; |
| } |
| |
| static int ipw2100_wx_set_nick(struct net_device *dev, |
| struct iw_request_info *info, |
| union iwreq_data *wrqu, char *extra) |
| { |
| /* |
| * This can be called at any time. No action lock required |
| */ |
| |
| struct ipw2100_priv *priv = libipw_priv(dev); |
| |
| if (wrqu->data.length > IW_ESSID_MAX_SIZE) |
| return -E2BIG; |
| |
| wrqu->data.length = min((size_t) wrqu->data.length, sizeof(priv->nick)); |
| memset(priv->nick, 0, sizeof(priv->nick)); |
| memcpy(priv->nick, extra, wrqu->data.length); |
| |
| IPW_DEBUG_WX("SET Nickname -> %s\n", priv->nick); |
| |
| return 0; |
| } |
| |
| static int ipw2100_wx_get_nick(struct net_device *dev, |
| struct iw_request_info *info, |
| union iwreq_data *wrqu, char *extra) |
| { |
| /* |
| * This can be called at any time. No action lock required |
| */ |
| |
| struct ipw2100_priv *priv = libipw_priv(dev); |
| |
| wrqu->data.length = strlen(priv->nick); |
| memcpy(extra, priv->nick, wrqu->data.length); |
| wrqu->data.flags = 1; /* active */ |
| |
| IPW_DEBUG_WX("GET Nickname -> %s\n", extra); |
| |
| return 0; |
| } |
| |
| static int ipw2100_wx_set_rate(struct net_device *dev, |
| struct iw_request_info *info, |
| union iwreq_data *wrqu, char *extra) |
| { |
| struct ipw2100_priv *priv = libipw_priv(dev); |
| u32 target_rate = wrqu->bitrate.value; |
| u32 rate; |
| int err = 0; |
| |
| mutex_lock(&priv->action_mutex); |
| if (!(priv->status & STATUS_INITIALIZED)) { |
| err = -EIO; |
| goto done; |
| } |
| |
| rate = 0; |
| |
| if (target_rate == 1000000 || |
| (!wrqu->bitrate.fixed && target_rate > 1000000)) |
| rate |= TX_RATE_1_MBIT; |
| if (target_rate == 2000000 || |
| (!wrqu->bitrate.fixed && target_rate > 2000000)) |
| rate |= TX_RATE_2_MBIT; |
| if (target_rate == 5500000 || |
| (!wrqu->bitrate.fixed && target_rate > 5500000)) |
| rate |= TX_RATE_5_5_MBIT; |
| if (target_rate == 11000000 || |
| (!wrqu->bitrate.fixed && target_rate > 11000000)) |
| rate |= TX_RATE_11_MBIT; |
| if (rate == 0) |
| rate = DEFAULT_TX_RATES; |
| |
| err = ipw2100_set_tx_rates(priv, rate, 0); |
| |
| IPW_DEBUG_WX("SET Rate -> %04X\n", rate); |
| done: |
| mutex_unlock(&priv->action_mutex); |
| return err; |
| } |
| |
| static int ipw2100_wx_get_rate(struct net_device *dev, |
| struct iw_request_info *info, |
| union iwreq_data *wrqu, char *extra) |
| { |
| struct ipw2100_priv *priv = libipw_priv(dev); |
| int val; |
| unsigned int len = sizeof(val); |
| int err = 0; |
| |
| if (!(priv->status & STATUS_ENABLED) || |
| priv->status & STATUS_RF_KILL_MASK || |
| !(priv->status & STATUS_ASSOCIATED)) { |
| wrqu->bitrate.value = 0; |
| return 0; |
| } |
| |
| mutex_lock(&priv->action_mutex); |
| if (!(priv->status & STATUS_INITIALIZED)) { |
| err = -EIO; |
| goto done; |
| } |
| |
| err = ipw2100_get_ordinal(priv, IPW_ORD_CURRENT_TX_RATE, &val, &len); |
| if (err) { |
| IPW_DEBUG_WX("failed querying ordinals.\n"); |
| goto done; |
| } |
| |
| switch (val & TX_RATE_MASK) { |
| case TX_RATE_1_MBIT: |
| wrqu->bitrate.value = 1000000; |
| break; |
| case TX_RATE_2_MBIT: |
| wrqu->bitrate.value = 2000000; |
| break; |
| case TX_RATE_5_5_MBIT: |
| wrqu->bitrate.value = 5500000; |
| break; |
| case TX_RATE_11_MBIT: |
| wrqu->bitrate.value = 11000000; |
| break; |
| default: |
| wrqu->bitrate.value = 0; |
| } |
| |
| IPW_DEBUG_WX("GET Rate -> %d\n", wrqu->bitrate.value); |
| |
| done: |
| mutex_unlock(&priv->action_mutex); |
| return err; |
| } |
| |
| static int ipw2100_wx_set_rts(struct net_device *dev, |
| struct iw_request_info *info, |
| union iwreq_data *wrqu, char *extra) |
| { |
| struct ipw2100_priv *priv = libipw_priv(dev); |
| int value, err; |
| |
| /* Auto RTS not yet supported */ |
| if (wrqu->rts.fixed == 0) |
| return -EINVAL; |
| |
| mutex_lock(&priv->action_mutex); |
| if (!(priv->status & STATUS_INITIALIZED)) { |
| err = -EIO; |
| goto done; |
| } |
| |
| if (wrqu->rts.disabled) |
| value = priv->rts_threshold | RTS_DISABLED; |
| else { |
| if (wrqu->rts.value < 1 || wrqu->rts.value > 2304) { |
| err = -EINVAL; |
| goto done; |
| } |
| value = wrqu->rts.value; |
| } |
| |
| err = ipw2100_set_rts_threshold(priv, value); |
| |
| IPW_DEBUG_WX("SET RTS Threshold -> 0x%08X\n", value); |
| done: |
| mutex_unlock(&priv->action_mutex); |
| return err; |
| } |
| |
| static int ipw2100_wx_get_rts(struct net_device *dev, |
| struct iw_request_info *info, |
| union iwreq_data *wrqu, char *extra) |
| { |
| /* |
| * This can be called at any time. No action lock required |
| */ |
| |
| struct ipw2100_priv *priv = libipw_priv(dev); |
| |
| wrqu->rts.value = priv->rts_threshold & ~RTS_DISABLED; |
| wrqu->rts.fixed = 1; /* no auto select */ |
| |
| /* If RTS is set to the default value, then it is disabled */ |
| wrqu->rts.disabled = (priv->rts_threshold & RTS_DISABLED) ? 1 : 0; |
| |
| IPW_DEBUG_WX("GET RTS Threshold -> 0x%08X\n", wrqu->rts.value); |
| |
| return 0; |
| } |
| |
| static int ipw2100_wx_set_txpow(struct net_device *dev, |
| struct iw_request_info *info, |
| union iwreq_data *wrqu, char *extra) |
| { |
| struct ipw2100_priv *priv = libipw_priv(dev); |
| int err = 0, value; |
| |
| if (ipw_radio_kill_sw(priv, wrqu->txpower.disabled)) |
| return -EINPROGRESS; |
| |
| if (priv->ieee->iw_mode != IW_MODE_ADHOC) |
| return 0; |
| |
| if ((wrqu->txpower.flags & IW_TXPOW_TYPE) != IW_TXPOW_DBM) |
| return -EINVAL; |
| |
| if (wrqu->txpower.fixed == 0) |
| value = IPW_TX_POWER_DEFAULT; |
| else { |
| if (wrqu->txpower.value < IPW_TX_POWER_MIN_DBM || |
| wrqu->txpower.value > IPW_TX_POWER_MAX_DBM) |
| return -EINVAL; |
| |
| value = wrqu->txpower.value; |
| } |
| |
| mutex_lock(&priv->action_mutex); |
| if (!(priv->status & STATUS_INITIALIZED)) { |
| err = -EIO; |
| goto done; |
| } |
| |
| err = ipw2100_set_tx_power(priv, value); |
| |
| IPW_DEBUG_WX("SET TX Power -> %d\n", value); |
| |
| done: |
| mutex_unlock(&priv->action_mutex); |
| return err; |
| } |
| |
| static int ipw2100_wx_get_txpow(struct net_device *dev, |
| struct iw_request_info *info, |
| union iwreq_data *wrqu, char *extra) |
| { |
| /* |
| * This can be called at any time. No action lock required |
| */ |
| |
| struct ipw2100_priv *priv = libipw_priv(dev); |
| |
| wrqu->txpower.disabled = (priv->status & STATUS_RF_KILL_MASK) ? 1 : 0; |
| |
| if (priv->tx_power == IPW_TX_POWER_DEFAULT) { |
| wrqu->txpower.fixed = 0; |
| wrqu->txpower.value = IPW_TX_POWER_MAX_DBM; |
| } else { |
| wrqu->txpower.fixed = 1; |
| wrqu->txpower.value = priv->tx_power; |
| } |
| |
| wrqu->txpower.flags = IW_TXPOW_DBM; |
| |
| IPW_DEBUG_WX("GET TX Power -> %d\n", wrqu->txpower.value); |
| |
| return 0; |
| } |
| |
| static int ipw2100_wx_set_frag(struct net_device *dev, |
| struct iw_request_info *info, |
| union iwreq_data *wrqu, char *extra) |
| { |
| /* |
| * This can be called at any time. No action lock required |
| */ |
| |
| struct ipw2100_priv *priv = libipw_priv(dev); |
| |
| if (!wrqu->frag.fixed) |
| return -EINVAL; |
| |
| if (wrqu->frag.disabled) { |
| priv->frag_threshold |= FRAG_DISABLED; |
| priv->ieee->fts = DEFAULT_FTS; |
| } else { |
| if (wrqu->frag.value < MIN_FRAG_THRESHOLD || |
| wrqu->frag.value > MAX_FRAG_THRESHOLD) |
| return -EINVAL; |
| |
| priv->ieee->fts = wrqu->frag.value & ~0x1; |
| priv->frag_threshold = priv->ieee->fts; |
| } |
| |
| IPW_DEBUG_WX("SET Frag Threshold -> %d\n", priv->ieee->fts); |
| |
| return 0; |
| } |
| |
| static int ipw2100_wx_get_frag(struct net_device *dev, |
| struct iw_request_info *info, |
| union iwreq_data *wrqu, char *extra) |
| { |
| /* |
| * This can be called at any time. No action lock required |
| */ |
| |
| struct ipw2100_priv *priv = libipw_priv(dev); |
| wrqu->frag.value = priv->frag_threshold & ~FRAG_DISABLED; |
| wrqu->frag.fixed = 0; /* no auto select */ |
| wrqu->frag.disabled = (priv->frag_threshold & FRAG_DISABLED) ? 1 : 0; |
| |
| IPW_DEBUG_WX("GET Frag Threshold -> %d\n", wrqu->frag.value); |
| |
| return 0; |
| } |
| |
| static int ipw2100_wx_set_retry(struct net_device *dev, |
| struct iw_request_info *info, |
| union iwreq_data *wrqu, char *extra) |
| { |
| struct ipw2100_priv *priv = libipw_priv(dev); |
| int err = 0; |
| |
| if (wrqu->retry.flags & IW_RETRY_LIFETIME || wrqu->retry.disabled) |
| return -EINVAL; |
| |
| if (!(wrqu->retry.flags & IW_RETRY_LIMIT)) |
| return 0; |
| |
| mutex_lock(&priv->action_mutex); |
| if (!(priv->status & STATUS_INITIALIZED)) { |
| err = -EIO; |
| goto done; |
| } |
| |
| if (wrqu->retry.flags & IW_RETRY_SHORT) { |
| err = ipw2100_set_short_retry(priv, wrqu->retry.value); |
| IPW_DEBUG_WX("SET Short Retry Limit -> %d\n", |
| wrqu->retry.value); |
| goto done; |
| } |
| |
| if (wrqu->retry.flags & IW_RETRY_LONG) { |
| err = ipw2100_set_long_retry(priv, wrqu->retry.value); |
| IPW_DEBUG_WX("SET Long Retry Limit -> %d\n", |
| wrqu->retry.value); |
| goto done; |
| } |
| |
| err = ipw2100_set_short_retry(priv, wrqu->retry.value); |
| if (!err) |
| err = ipw2100_set_long_retry(priv, wrqu->retry.value); |
| |
| IPW_DEBUG_WX("SET Both Retry Limits -> %d\n", wrqu->retry.value); |
| |
| done: |
| mutex_unlock(&priv->action_mutex); |
| return err; |
| } |
| |
| static int ipw2100_wx_get_retry(struct net_device *dev, |
| struct iw_request_info *info, |
| union iwreq_data *wrqu, char *extra) |
| { |
| /* |
| * This can be called at any time. No action lock required |
| */ |
| |
| struct ipw2100_priv *priv = libipw_priv(dev); |
| |
| wrqu->retry.disabled = 0; /* can't be disabled */ |
| |
| if ((wrqu->retry.flags & IW_RETRY_TYPE) == IW_RETRY_LIFETIME) |
| return -EINVAL; |
| |
| if (wrqu->retry.flags & IW_RETRY_LONG) { |
| wrqu->retry.flags = IW_RETRY_LIMIT | IW_RETRY_LONG; |
| wrqu->retry.value = priv->long_retry_limit; |
| } else { |
| wrqu->retry.flags = |
| (priv->short_retry_limit != |
| priv->long_retry_limit) ? |
| IW_RETRY_LIMIT | IW_RETRY_SHORT : IW_RETRY_LIMIT; |
| |
| wrqu->retry.value = priv->short_retry_limit; |
| } |
| |
| IPW_DEBUG_WX("GET Retry -> %d\n", wrqu->retry.value); |
| |
| return 0; |
| } |
| |
| static int ipw2100_wx_set_scan(struct net_device *dev, |
| struct iw_request_info *info, |
| union iwreq_data *wrqu, char *extra) |
| { |
| struct ipw2100_priv *priv = libipw_priv(dev); |
| int err = 0; |
| |
| mutex_lock(&priv->action_mutex); |
| if (!(priv->status & STATUS_INITIALIZED)) { |
| err = -EIO; |
| goto done; |
| } |
| |
| IPW_DEBUG_WX("Initiating scan...\n"); |
| |
| priv->user_requested_scan = 1; |
| if (ipw2100_set_scan_options(priv) || ipw2100_start_scan(priv)) { |
| IPW_DEBUG_WX("Start scan failed.\n"); |
| |
| /* TODO: Mark a scan as pending so when hardware initialized |
| * a scan starts */ |
| } |
| |
| done: |
| mutex_unlock(&priv->action_mutex); |
| return err; |
| } |
| |
| static int ipw2100_wx_get_scan(struct net_device *dev, |
| struct iw_request_info *info, |
| union iwreq_data *wrqu, char *extra) |
| { |
| /* |
| * This can be called at any time. No action lock required |
| */ |
| |
| struct ipw2100_priv *priv = libipw_priv(dev); |
| return libipw_wx_get_scan(priv->ieee, info, wrqu, extra); |
| } |
| |
| /* |
| * Implementation based on code in hostap-driver v0.1.3 hostap_ioctl.c |
| */ |
| static int ipw2100_wx_set_encode(struct net_device *dev, |
| struct iw_request_info *info, |
| union iwreq_data *wrqu, char *key) |
| { |
| /* |
| * No check of STATUS_INITIALIZED required |
| */ |
| |
| struct ipw2100_priv *priv = libipw_priv(dev); |
| return libipw_wx_set_encode(priv->ieee, info, wrqu, key); |
| } |
| |
| static int ipw2100_wx_get_encode(struct net_device *dev, |
| struct iw_request_info *info, |
| union iwreq_data *wrqu, char *key) |
| { |
| /* |
| * This can be called at any time. No action lock required |
| */ |
| |
| struct ipw2100_priv *priv = libipw_priv(dev); |
| return libipw_wx_get_encode(priv->ieee, info, wrqu, key); |
| } |
| |
| static int ipw2100_wx_set_power(struct net_device *dev, |
| struct iw_request_info *info, |
| union iwreq_data *wrqu, char *extra) |
| { |
| struct ipw2100_priv *priv = libipw_priv(dev); |
| int err = 0; |
| |
| mutex_lock(&priv->action_mutex); |
| if (!(priv->status & STATUS_INITIALIZED)) { |
| err = -EIO; |
| goto done; |
| } |
| |
| if (wrqu->power.disabled) { |
| priv->power_mode = IPW_POWER_LEVEL(priv->power_mode); |
| err = ipw2100_set_power_mode(priv, IPW_POWER_MODE_CAM); |
| IPW_DEBUG_WX("SET Power Management Mode -> off\n"); |
| goto done; |
| } |
| |
| switch (wrqu->power.flags & IW_POWER_MODE) { |
| case IW_POWER_ON: /* If not specified */ |
| case IW_POWER_MODE: /* If set all mask */ |
| case IW_POWER_ALL_R: /* If explicitly state all */ |
| break; |
| default: /* Otherwise we don't support it */ |
| IPW_DEBUG_WX("SET PM Mode: %X not supported.\n", |
| wrqu->power.flags); |
| err = -EOPNOTSUPP; |
| goto done; |
| } |
| |
| /* If the user hasn't specified a power management mode yet, default |
| * to BATTERY */ |
| priv->power_mode = IPW_POWER_ENABLED | priv->power_mode; |
| err = ipw2100_set_power_mode(priv, IPW_POWER_LEVEL(priv->power_mode)); |
| |
| IPW_DEBUG_WX("SET Power Management Mode -> 0x%02X\n", priv->power_mode); |
| |
| done: |
| mutex_unlock(&priv->action_mutex); |
| return err; |
| |
| } |
| |
| static int ipw2100_wx_get_power(struct net_device *dev, |
| struct iw_request_info *info, |
| union iwreq_data *wrqu, char *extra) |
| { |
| /* |
| * This can be called at any time. No action lock required |
| */ |
| |
| struct ipw2100_priv *priv = libipw_priv(dev); |
| |
| if (!(priv->power_mode & IPW_POWER_ENABLED)) |
| wrqu->power.disabled = 1; |
| else { |
| wrqu->power.disabled = 0; |
| wrqu->power.flags = 0; |
| } |
| |
| IPW_DEBUG_WX("GET Power Management Mode -> %02X\n", priv->power_mode); |
| |
| return 0; |
| } |
| |
| /* |
| * WE-18 WPA support |
| */ |
| |
| /* SIOCSIWGENIE */ |
| static int ipw2100_wx_set_genie(struct net_device *dev, |
| struct iw_request_info *info, |
| union iwreq_data *wrqu, char *extra) |
| { |
| |
| struct ipw2100_priv *priv = libipw_priv(dev); |
| struct libipw_device *ieee = priv->ieee; |
| u8 *buf; |
| |
| if (!ieee->wpa_enabled) |
| return -EOPNOTSUPP; |
| |
| if (wrqu->data.length > MAX_WPA_IE_LEN || |
| (wrqu->data.length && extra == NULL)) |
| return -EINVAL; |
| |
| if (wrqu->data.length) { |
| buf = kmemdup(extra, wrqu->data.length, GFP_KERNEL); |
| if (buf == NULL) |
| return -ENOMEM; |
| |
| kfree(ieee->wpa_ie); |
| ieee->wpa_ie = buf; |
| ieee->wpa_ie_len = wrqu->data.length; |
| } else { |
| kfree(ieee->wpa_ie); |
| ieee->wpa_ie = NULL; |
| ieee->wpa_ie_len = 0; |
| } |
| |
| ipw2100_wpa_assoc_frame(priv, ieee->wpa_ie, ieee->wpa_ie_len); |
| |
| return 0; |
| } |
| |
| /* SIOCGIWGENIE */ |
| static int ipw2100_wx_get_genie(struct net_device *dev, |
| struct iw_request_info *info, |
| union iwreq_data *wrqu, char *extra) |
| { |
| struct ipw2100_priv *priv = libipw_priv(dev); |
| struct libipw_device *ieee = priv->ieee; |
| |
| if (ieee->wpa_ie_len == 0 || ieee->wpa_ie == NULL) { |
| wrqu->data.length = 0; |
| return 0; |
| } |
| |
| if (wrqu->data.length < ieee->wpa_ie_len) |
| return -E2BIG; |
| |
| wrqu->data.length = ieee->wpa_ie_len; |
| memcpy(extra, ieee->wpa_ie, ieee->wpa_ie_len); |
| |
| return 0; |
| } |
| |
| /* SIOCSIWAUTH */ |
| static int ipw2100_wx_set_auth(struct net_device *dev, |
| struct iw_request_info *info, |
| union iwreq_data *wrqu, char *extra) |
| { |
| struct ipw2100_priv *priv = libipw_priv(dev); |
| struct libipw_device *ieee = priv->ieee; |
| struct iw_param *param = &wrqu->param; |
| struct lib80211_crypt_data *crypt; |
| unsigned long flags; |
| int ret = 0; |
| |
| switch (param->flags & IW_AUTH_INDEX) { |
| case IW_AUTH_WPA_VERSION: |
| case IW_AUTH_CIPHER_PAIRWISE: |
| case IW_AUTH_CIPHER_GROUP: |
| case IW_AUTH_KEY_MGMT: |
| /* |
| * ipw2200 does not use these parameters |
| */ |
| break; |
| |
| case IW_AUTH_TKIP_COUNTERMEASURES: |
| crypt = priv->ieee->crypt_info.crypt[priv->ieee->crypt_info.tx_keyidx]; |
| if (!crypt || !crypt->ops->set_flags || !crypt->ops->get_flags) |
| break; |
| |
| flags = crypt->ops->get_flags(crypt->priv); |
| |
| if (param->value) |
| flags |= IEEE80211_CRYPTO_TKIP_COUNTERMEASURES; |
| else |
| flags &= ~IEEE80211_CRYPTO_TKIP_COUNTERMEASURES; |
| |
| crypt->ops->set_flags(flags, crypt->priv); |
| |
| break; |
| |
| case IW_AUTH_DROP_UNENCRYPTED:{ |
| /* HACK: |
| * |
| * wpa_supplicant calls set_wpa_enabled when the driver |
| * is loaded and unloaded, regardless of if WPA is being |
| * used. No other calls are made which can be used to |
| * determine if encryption will be used or not prior to |
| * association being expected. If encryption is not being |
| * used, drop_unencrypted is set to false, else true -- we |
| * can use this to determine if the CAP_PRIVACY_ON bit should |
| * be set. |
| */ |
| struct libipw_security sec = { |
| .flags = SEC_ENABLED, |
| .enabled = param->value, |
| }; |
| priv->ieee->drop_unencrypted = param->value; |
| /* We only change SEC_LEVEL for open mode. Others |
| * are set by ipw_wpa_set_encryption. |
| */ |
| if (!param->value) { |
| sec.flags |= SEC_LEVEL; |
| sec.level = SEC_LEVEL_0; |
| } else { |
| sec.flags |= SEC_LEVEL; |
| sec.level = SEC_LEVEL_1; |
| } |
| if (priv->ieee->set_security) |
| priv->ieee->set_security(priv->ieee->dev, &sec); |
| break; |
| } |
| |
| case IW_AUTH_80211_AUTH_ALG: |
| ret = ipw2100_wpa_set_auth_algs(priv, param->value); |
| break; |
| |
| case IW_AUTH_WPA_ENABLED: |
| ret = ipw2100_wpa_enable(priv, param->value); |
| break; |
| |
| case IW_AUTH_RX_UNENCRYPTED_EAPOL: |
| ieee->ieee802_1x = param->value; |
| break; |
| |
| //case IW_AUTH_ROAMING_CONTROL: |
| case IW_AUTH_PRIVACY_INVOKED: |
| ieee->privacy_invoked = param->value; |
| break; |
| |
| default: |
| return -EOPNOTSUPP; |
| } |
| return ret; |
| } |
| |
| /* SIOCGIWAUTH */ |
| static int ipw2100_wx_get_auth(struct net_device *dev, |
| struct iw_request_info *info, |
| union iwreq_data *wrqu, char *extra) |
| { |
| struct ipw2100_priv *priv = libipw_priv(dev); |
| struct libipw_device *ieee = priv->ieee; |
| struct lib80211_crypt_data *crypt; |
| struct iw_param *param = &wrqu->param; |
| int ret = 0; |
| |
| switch (param->flags & IW_AUTH_INDEX) { |
| case IW_AUTH_WPA_VERSION: |
| case IW_AUTH_CIPHER_PAIRWISE: |
| case IW_AUTH_CIPHER_GROUP: |
| case IW_AUTH_KEY_MGMT: |
| /* |
| * wpa_supplicant will control these internally |
| */ |
| ret = -EOPNOTSUPP; |
| break; |
| |
| case IW_AUTH_TKIP_COUNTERMEASURES: |
| crypt = priv->ieee->crypt_info.crypt[priv->ieee->crypt_info.tx_keyidx]; |
| if (!crypt || !crypt->ops->get_flags) { |
| IPW_DEBUG_WARNING("Can't get TKIP countermeasures: " |
| "crypt not set!\n"); |
| break; |
| } |
| |
| param->value = (crypt->ops->get_flags(crypt->priv) & |
| IEEE80211_CRYPTO_TKIP_COUNTERMEASURES) ? 1 : 0; |
| |
| break; |
| |
| case IW_AUTH_DROP_UNENCRYPTED: |
| param->value = ieee->drop_unencrypted; |
| break; |
| |
| case IW_AUTH_80211_AUTH_ALG: |
| param->value = priv->ieee->sec.auth_mode; |
| break; |
| |
| case IW_AUTH_WPA_ENABLED: |
| param->value = ieee->wpa_enabled; |
| break; |
| |
| case IW_AUTH_RX_UNENCRYPTED_EAPOL: |
| param->value = ieee->ieee802_1x; |
| break; |
| |
| case IW_AUTH_ROAMING_CONTROL: |
| case IW_AUTH_PRIVACY_INVOKED: |
| param->value = ieee->privacy_invoked; |
| break; |
| |
| default: |
| return -EOPNOTSUPP; |
| } |
| return 0; |
| } |
| |
| /* SIOCSIWENCODEEXT */ |
| static int ipw2100_wx_set_encodeext(struct net_device *dev, |
| struct iw_request_info *info, |
| union iwreq_data *wrqu, char *extra) |
| { |
| struct ipw2100_priv *priv = libipw_priv(dev); |
| return libipw_wx_set_encodeext(priv->ieee, info, wrqu, extra); |
| } |
| |
| /* SIOCGIWENCODEEXT */ |
| static int ipw2100_wx_get_encodeext(struct net_device *dev, |
| struct iw_request_info *info, |
| union iwreq_data *wrqu, char *extra) |
| { |
| struct ipw2100_priv *priv = libipw_priv(dev); |
| return libipw_wx_get_encodeext(priv->ieee, info, wrqu, extra); |
| } |
| |
| /* SIOCSIWMLME */ |
| static int ipw2100_wx_set_mlme(struct net_device *dev, |
| struct iw_request_info *info, |
| union iwreq_data *wrqu, char *extra) |
| { |
| struct ipw2100_priv *priv = libipw_priv(dev); |
| struct iw_mlme *mlme = (struct iw_mlme *)extra; |
| __le16 reason; |
| |
| reason = cpu_to_le16(mlme->reason_code); |
| |
| switch (mlme->cmd) { |
| case IW_MLME_DEAUTH: |
| // silently ignore |
| break; |
| |
| case IW_MLME_DISASSOC: |
| ipw2100_disassociate_bssid(priv); |
| break; |
| |
| default: |
| return -EOPNOTSUPP; |
| } |
| return 0; |
| } |
| |
| /* |
| * |
| * IWPRIV handlers |
| * |
| */ |
| #ifdef CONFIG_IPW2100_MONITOR |
| static int ipw2100_wx_set_promisc(struct net_device *dev, |
| struct iw_request_info *info, |
| union iwreq_data *wrqu, char *extra) |
| { |
| struct ipw2100_priv *priv = libipw_priv(dev); |
| int *parms = (int *)extra; |
| int enable = (parms[0] > 0); |
| int err = 0; |
| |
| mutex_lock(&priv->action_mutex); |
| if (!(priv->status & STATUS_INITIALIZED)) { |
| err = -EIO; |
| goto done; |
| } |
| |
| if (enable) { |
| if (priv->ieee->iw_mode == IW_MODE_MONITOR) { |
| err = ipw2100_set_channel(priv, parms[1], 0); |
| goto done; |
| } |
| priv->channel = parms[1]; |
| err = ipw2100_switch_mode(priv, IW_MODE_MONITOR); |
| } else { |
| if (priv->ieee->iw_mode == IW_MODE_MONITOR) |
| err = ipw2100_switch_mode(priv, priv->last_mode); |
| } |
| done: |
| mutex_unlock(&priv->action_mutex); |
| return err; |
| } |
| |
| static int ipw2100_wx_reset(struct net_device *dev, |
| struct iw_request_info *info, |
| union iwreq_data *wrqu, char *extra) |
| { |
| struct ipw2100_priv *priv = libipw_priv(dev); |
| if (priv->status & STATUS_INITIALIZED) |
| schedule_reset(priv); |
| return 0; |
| } |
| |
| #endif |
| |
| static int ipw2100_wx_set_powermode(struct net_device *dev, |
| struct iw_request_info *info, |
| union iwreq_data *wrqu, char *extra) |
| { |
| struct ipw2100_priv *priv = libipw_priv(dev); |
| int err = 0, mode = *(int *)extra; |
| |
| mutex_lock(&priv->action_mutex); |
| if (!(priv->status & STATUS_INITIALIZED)) { |
| err = -EIO; |
| goto done; |
| } |
| |
| if ((mode < 0) || (mode > POWER_MODES)) |
| mode = IPW_POWER_AUTO; |
| |
| if (IPW_POWER_LEVEL(priv->power_mode) != mode) |
| err = ipw2100_set_power_mode(priv, mode); |
| done: |
| mutex_unlock(&priv->action_mutex); |
| return err; |
| } |
| |
| #define MAX_POWER_STRING 80 |
| static int ipw2100_wx_get_powermode(struct net_device *dev, |
| struct iw_request_info *info, |
| union iwreq_data *wrqu, char *extra) |
| { |
| /* |
| * This can be called at any time. No action lock required |
| */ |
| |
| struct ipw2100_priv *priv = libipw_priv(dev); |
| int level = IPW_POWER_LEVEL(priv->power_mode); |
| s32 timeout, period; |
| |
| if (!(priv->power_mode & IPW_POWER_ENABLED)) { |
| snprintf(extra, MAX_POWER_STRING, |
| "Power save level: %d (Off)", level); |
| } else { |
| switch (level) { |
| case IPW_POWER_MODE_CAM: |
| snprintf(extra, MAX_POWER_STRING, |
| "Power save level: %d (None)", level); |
| break; |
| case IPW_POWER_AUTO: |
| snprintf(extra, MAX_POWER_STRING, |
| "Power save level: %d (Auto)", level); |
| break; |
| default: |
| timeout = timeout_duration[level - 1] / 1000; |
| period = period_duration[level - 1] / 1000; |
| snprintf(extra, MAX_POWER_STRING, |
| "Power save level: %d " |
| "(Timeout %dms, Period %dms)", |
| level, timeout, period); |
| } |
| } |
| |
| wrqu->data.length = strlen(extra) + 1; |
| |
| return 0; |
| } |
| |
| static int ipw2100_wx_set_preamble(struct net_device *dev, |
| struct iw_request_info *info, |
| union iwreq_data *wrqu, char *extra) |
| { |
| struct ipw2100_priv *priv = libipw_priv(dev); |
| int err, mode = *(int *)extra; |
| |
| mutex_lock(&priv->action_mutex); |
| if (!(priv->status & STATUS_INITIALIZED)) { |
| err = -EIO; |
| goto done; |
| } |
| |
| if (mode == 1) |
| priv->config |= CFG_LONG_PREAMBLE; |
| else if (mode == 0) |
| priv->config &= ~CFG_LONG_PREAMBLE; |
| else { |
| err = -EINVAL; |
| goto done; |
| } |
| |
| err = ipw2100_system_config(priv, 0); |
| |
| done: |
| mutex_unlock(&priv->action_mutex); |
| return err; |
| } |
| |
| static int ipw2100_wx_get_preamble(struct net_device *dev, |
| struct iw_request_info *info, |
| union iwreq_data *wrqu, char *extra) |
| { |
| /* |
| * This can be called at any time. No action lock required |
| */ |
| |
| struct ipw2100_priv *priv = libipw_priv(dev); |
| |
| if (priv->config & CFG_LONG_PREAMBLE) |
| snprintf(wrqu->name, IFNAMSIZ, "long (1)"); |
| else |
| snprintf(wrqu->name, IFNAMSIZ, "auto (0)"); |
| |
| return 0; |
| } |
| |
| #ifdef CONFIG_IPW2100_MONITOR |
| static int ipw2100_wx_set_crc_check(struct net_device *dev, |
| struct iw_request_info *info, |
| union iwreq_data *wrqu, char *extra) |
| { |
| struct ipw2100_priv *priv = libipw_priv(dev); |
| int err, mode = *(int *)extra; |
| |
| mutex_lock(&priv->action_mutex); |
| if (!(priv->status & STATUS_INITIALIZED)) { |
| err = -EIO; |
| goto done; |
| } |
| |
| if (mode == 1) |
| priv->config |= CFG_CRC_CHECK; |
| else if (mode == 0) |
| priv->config &= ~CFG_CRC_CHECK; |
| else { |
| err = -EINVAL; |
| goto done; |
| } |
| err = 0; |
| |
| done: |
| mutex_unlock(&priv->action_mutex); |
| return err; |
| } |
| |
| static int ipw2100_wx_get_crc_check(struct net_device *dev, |
| struct iw_request_info *info, |
| union iwreq_data *wrqu, char *extra) |
| { |
| /* |
| * This can be called at any time. No action lock required |
| */ |
| |
| struct ipw2100_priv *priv = libipw_priv(dev); |
| |
| if (priv->config & CFG_CRC_CHECK) |
| snprintf(wrqu->name, IFNAMSIZ, "CRC checked (1)"); |
| else |
| snprintf(wrqu->name, IFNAMSIZ, "CRC ignored (0)"); |
| |
| return 0; |
| } |
| #endif /* CONFIG_IPW2100_MONITOR */ |
| |
| static iw_handler ipw2100_wx_handlers[] = { |
| NULL, /* SIOCSIWCOMMIT */ |
| ipw2100_wx_get_name, /* SIOCGIWNAME */ |
| NULL, /* SIOCSIWNWID */ |
| NULL, /* SIOCGIWNWID */ |
| ipw2100_wx_set_freq, /* SIOCSIWFREQ */ |
| ipw2100_wx_get_freq, /* SIOCGIWFREQ */ |
| ipw2100_wx_set_mode, /* SIOCSIWMODE */ |
| ipw2100_wx_get_mode, /* SIOCGIWMODE */ |
| NULL, /* SIOCSIWSENS */ |
| NULL, /* SIOCGIWSENS */ |
| NULL, /* SIOCSIWRANGE */ |
| ipw2100_wx_get_range, /* SIOCGIWRANGE */ |
| NULL, /* SIOCSIWPRIV */ |
| NULL, /* SIOCGIWPRIV */ |
| NULL, /* SIOCSIWSTATS */ |
| NULL, /* SIOCGIWSTATS */ |
| NULL, /* SIOCSIWSPY */ |
| NULL, /* SIOCGIWSPY */ |
| NULL, /* SIOCGIWTHRSPY */ |
| NULL, /* SIOCWIWTHRSPY */ |
| ipw2100_wx_set_wap, /* SIOCSIWAP */ |
| ipw2100_wx_get_wap, /* SIOCGIWAP */ |
| ipw2100_wx_set_mlme, /* SIOCSIWMLME */ |
| NULL, /* SIOCGIWAPLIST -- deprecated */ |
| ipw2100_wx_set_scan, /* SIOCSIWSCAN */ |
| ipw2100_wx_get_scan, /* SIOCGIWSCAN */ |
| ipw2100_wx_set_essid, /* SIOCSIWESSID */ |
| ipw2100_wx_get_essid, /* SIOCGIWESSID */ |
| ipw2100_wx_set_nick, /* SIOCSIWNICKN */ |
| ipw2100_wx_get_nick, /* SIOCGIWNICKN */ |
| NULL, /* -- hole -- */ |
| NULL, /* -- hole -- */ |
| ipw2100_wx_set_rate, /* SIOCSIWRATE */ |
| ipw2100_wx_get_rate, /* SIOCGIWRATE */ |
| ipw2100_wx_set_rts, /* SIOCSIWRTS */ |
| ipw2100_wx_get_rts, /* SIOCGIWRTS */ |
| ipw2100_wx_set_frag, /* SIOCSIWFRAG */ |
| ipw2100_wx_get_frag, /* SIOCGIWFRAG */ |
| ipw2100_wx_set_txpow, /* SIOCSIWTXPOW */ |
| ipw2100_wx_get_txpow, /* SIOCGIWTXPOW */ |
| ipw2100_wx_set_retry, /* SIOCSIWRETRY */ |
| ipw2100_wx_get_retry, /* SIOCGIWRETRY */ |
| ipw2100_wx_set_encode, /* SIOCSIWENCODE */ |
| ipw2100_wx_get_encode, /* SIOCGIWENCODE */ |
| ipw2100_wx_set_power, /* SIOCSIWPOWER */ |
| ipw2100_wx_get_power, /* SIOCGIWPOWER */ |
| NULL, /* -- hole -- */ |
| NULL, /* -- hole -- */ |
| ipw2100_wx_set_genie, /* SIOCSIWGENIE */ |
| ipw2100_wx_get_genie, /* SIOCGIWGENIE */ |
| ipw2100_wx_set_auth, /* SIOCSIWAUTH */ |
| ipw2100_wx_get_auth, /* SIOCGIWAUTH */ |
| ipw2100_wx_set_encodeext, /* SIOCSIWENCODEEXT */ |
| ipw2100_wx_get_encodeext, /* SIOCGIWENCODEEXT */ |
| NULL, /* SIOCSIWPMKSA */ |
| }; |
| |
| #define IPW2100_PRIV_SET_MONITOR SIOCIWFIRSTPRIV |
| #define IPW2100_PRIV_RESET SIOCIWFIRSTPRIV+1 |
| #define IPW2100_PRIV_SET_POWER SIOCIWFIRSTPRIV+2 |
| #define IPW2100_PRIV_GET_POWER SIOCIWFIRSTPRIV+3 |
| #define IPW2100_PRIV_SET_LONGPREAMBLE SIOCIWFIRSTPRIV+4 |
| #define IPW2100_PRIV_GET_LONGPREAMBLE SIOCIWFIRSTPRIV+5 |
| #define IPW2100_PRIV_SET_CRC_CHECK SIOCIWFIRSTPRIV+6 |
| #define IPW2100_PRIV_GET_CRC_CHECK SIOCIWFIRSTPRIV+7 |
| |
| static const struct iw_priv_args ipw2100_private_args[] = { |
| |
| #ifdef CONFIG_IPW2100_MONITOR |
| { |
| IPW2100_PRIV_SET_MONITOR, |
| IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 2, 0, "monitor"}, |
| { |
| IPW2100_PRIV_RESET, |
| IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 0, 0, "reset"}, |
| #endif /* CONFIG_IPW2100_MONITOR */ |
| |
| { |
| IPW2100_PRIV_SET_POWER, |
| IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "set_power"}, |
| { |
| IPW2100_PRIV_GET_POWER, |
| 0, IW_PRIV_TYPE_CHAR | IW_PRIV_SIZE_FIXED | MAX_POWER_STRING, |
| "get_power"}, |
| { |
| IPW2100_PRIV_SET_LONGPREAMBLE, |
| IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "set_preamble"}, |
| { |
| IPW2100_PRIV_GET_LONGPREAMBLE, |
| 0, IW_PRIV_TYPE_CHAR | IW_PRIV_SIZE_FIXED | IFNAMSIZ, "get_preamble"}, |
| #ifdef CONFIG_IPW2100_MONITOR |
| { |
| IPW2100_PRIV_SET_CRC_CHECK, |
| IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "set_crc_check"}, |
| { |
| IPW2100_PRIV_GET_CRC_CHECK, |
| 0, IW_PRIV_TYPE_CHAR | IW_PRIV_SIZE_FIXED | IFNAMSIZ, "get_crc_check"}, |
| #endif /* CONFIG_IPW2100_MONITOR */ |
| }; |
| |
| static iw_handler ipw2100_private_handler[] = { |
| #ifdef CONFIG_IPW2100_MONITOR |
| ipw2100_wx_set_promisc, |
| ipw2100_wx_reset, |
| #else /* CONFIG_IPW2100_MONITOR */ |
| NULL, |
| NULL, |
| #endif /* CONFIG_IPW2100_MONITOR */ |
| ipw2100_wx_set_powermode, |
| ipw2100_wx_get_powermode, |
| ipw2100_wx_set_preamble, |
| ipw2100_wx_get_preamble, |
| #ifdef CONFIG_IPW2100_MONITOR |
| ipw2100_wx_set_crc_check, |
| ipw2100_wx_get_crc_check, |
| #else /* CONFIG_IPW2100_MONITOR */ |
| NULL, |
| NULL, |
| #endif /* CONFIG_IPW2100_MONITOR */ |
| }; |
| |
| /* |
| * Get wireless statistics. |
| * Called by /proc/net/wireless |
| * Also called by SIOCGIWSTATS |
| */ |
| static struct iw_statistics *ipw2100_wx_wireless_stats(struct net_device *dev) |
| { |
| enum { |
| POOR = 30, |
| FAIR = 60, |
| GOOD = 80, |
| VERY_GOOD = 90, |
| EXCELLENT = 95, |
| PERFECT = 100 |
| }; |
| int rssi_qual; |
| int tx_qual; |
| int beacon_qual; |
| int quality; |
| |
| struct ipw2100_priv *priv = libipw_priv(dev); |
| struct iw_statistics *wstats; |
| u32 rssi, tx_retries, missed_beacons, tx_failures; |
| u32 ord_len = sizeof(u32); |
| |
| if (!priv) |
| return (struct iw_statistics *)NULL; |
| |
| wstats = &priv->wstats; |
| |
| /* if hw is disabled, then ipw2100_get_ordinal() can't be called. |
| * ipw2100_wx_wireless_stats seems to be called before fw is |
| * initialized. STATUS_ASSOCIATED will only be set if the hw is up |
| * and associated; if not associcated, the values are all meaningless |
| * anyway, so set them all to NULL and INVALID */ |
| if (!(priv->status & STATUS_ASSOCIATED)) { |
| wstats->miss.beacon = 0; |
| wstats->discard.retries = 0; |
| wstats->qual.qual = 0; |
| wstats->qual.level = 0; |
| wstats->qual.noise = 0; |
| wstats->qual.updated = 7; |
| wstats->qual.updated |= IW_QUAL_NOISE_INVALID | |
| IW_QUAL_QUAL_INVALID | IW_QUAL_LEVEL_INVALID; |
| return wstats; |
| } |
| |
| if (ipw2100_get_ordinal(priv, IPW_ORD_STAT_PERCENT_MISSED_BCNS, |
| &missed_beacons, &ord_len)) |
| goto fail_get_ordinal; |
| |
| /* If we don't have a connection the quality and level is 0 */ |
| if (!(priv->status & STATUS_ASSOCIATED)) { |
| wstats->qual.qual = 0; |
| wstats->qual.level = 0; |
| } else { |
| if (ipw2100_get_ordinal(priv, IPW_ORD_RSSI_AVG_CURR, |
| &rssi, &ord_len)) |
| goto fail_get_ordinal; |
| wstats->qual.level = rssi + IPW2100_RSSI_TO_DBM; |
| if (rssi < 10) |
| rssi_qual = rssi * POOR / 10; |
| else if (rssi < 15) |
| rssi_qual = (rssi - 10) * (FAIR - POOR) / 5 + POOR; |
| else if (rssi < 20) |
| rssi_qual = (rssi - 15) * (GOOD - FAIR) / 5 + FAIR; |
| else if (rssi < 30) |
| rssi_qual = (rssi - 20) * (VERY_GOOD - GOOD) / |
| 10 + GOOD; |
| else |
| rssi_qual = (rssi - 30) * (PERFECT - VERY_GOOD) / |
| 10 + VERY_GOOD; |
| |
| if (ipw2100_get_ordinal(priv, IPW_ORD_STAT_PERCENT_RETRIES, |
| &tx_retries, &ord_len)) |
| goto fail_get_ordinal; |
| |
| if (tx_retries > 75) |
| tx_qual = (90 - tx_retries) * POOR / 15; |
| else if (tx_retries > 70) |
| tx_qual = (75 - tx_retries) * (FAIR - POOR) / 5 + POOR; |
| else if (tx_retries > 65) |
| tx_qual = (70 - tx_retries) * (GOOD - FAIR) / 5 + FAIR; |
| else if (tx_retries > 50) |
| tx_qual = (65 - tx_retries) * (VERY_GOOD - GOOD) / |
| 15 + GOOD; |
| else |
| tx_qual = (50 - tx_retries) * |
| (PERFECT - VERY_GOOD) / 50 + VERY_GOOD; |
| |
| if (missed_beacons > 50) |
| beacon_qual = (60 - missed_beacons) * POOR / 10; |
| else if (missed_beacons > 40) |
| beacon_qual = (50 - missed_beacons) * (FAIR - POOR) / |
| 10 + POOR; |
| else if (missed_beacons > 32) |
| beacon_qual = (40 - missed_beacons) * (GOOD - FAIR) / |
| 18 + FAIR; |
| else if (missed_beacons > 20) |
| beacon_qual = (32 - missed_beacons) * |
| (VERY_GOOD - GOOD) / 20 + GOOD; |
| else |
| beacon_qual = (20 - missed_beacons) * |
| (PERFECT - VERY_GOOD) / 20 + VERY_GOOD; |
| |
| quality = min(tx_qual, rssi_qual); |
| quality = min(beacon_qual, quality); |
| |
| #ifdef CONFIG_IPW2100_DEBUG |
| if (beacon_qual == quality) |
| IPW_DEBUG_WX("Quality clamped by Missed Beacons\n"); |
| else if (tx_qual == quality) |
| IPW_DEBUG_WX("Quality clamped by Tx Retries\n"); |
| else if (quality != 100) |
| IPW_DEBUG_WX("Quality clamped by Signal Strength\n"); |
| else |
| IPW_DEBUG_WX("Quality not clamped.\n"); |
| #endif |
| |
| wstats->qual.qual = quality; |
| wstats->qual.level = rssi + IPW2100_RSSI_TO_DBM; |
| } |
| |
| wstats->qual.noise = 0; |
| wstats->qual.updated = 7; |
| wstats->qual.updated |= IW_QUAL_NOISE_INVALID; |
| |
| /* FIXME: this is percent and not a # */ |
| wstats->miss.beacon = missed_beacons; |
| |
| if (ipw2100_get_ordinal(priv, IPW_ORD_STAT_TX_FAILURES, |
| &tx_failures, &ord_len)) |
| goto fail_get_ordinal; |
| wstats->discard.retries = tx_failures; |
| |
| return wstats; |
| |
| fail_get_ordinal: |
| IPW_DEBUG_WX("failed querying ordinals.\n"); |
| |
| return (struct iw_statistics *)NULL; |
| } |
| |
| static struct iw_handler_def ipw2100_wx_handler_def = { |
| .standard = ipw2100_wx_handlers, |
| .num_standard = ARRAY_SIZE(ipw2100_wx_handlers), |
| .num_private = ARRAY_SIZE(ipw2100_private_handler), |
| .num_private_args = ARRAY_SIZE(ipw2100_private_args), |
| .private = (iw_handler *) ipw2100_private_handler, |
| .private_args = (struct iw_priv_args *)ipw2100_private_args, |
| .get_wireless_stats = ipw2100_wx_wireless_stats, |
| }; |
| |
| static void ipw2100_wx_event_work(struct work_struct *work) |
| { |
| struct ipw2100_priv *priv = |
| container_of(work, struct ipw2100_priv, wx_event_work.work); |
| union iwreq_data wrqu; |
| unsigned int len = ETH_ALEN; |
| |
| if (priv->status & STATUS_STOPPING) |
| return; |
| |
| mutex_lock(&priv->action_mutex); |
| |
| IPW_DEBUG_WX("enter\n"); |
| |
| mutex_unlock(&priv->action_mutex); |
| |
| wrqu.ap_addr.sa_family = ARPHRD_ETHER; |
| |
| /* Fetch BSSID from the hardware */ |
| if (!(priv->status & (STATUS_ASSOCIATING | STATUS_ASSOCIATED)) || |
| priv->status & STATUS_RF_KILL_MASK || |
| ipw2100_get_ordinal(priv, IPW_ORD_STAT_ASSN_AP_BSSID, |
| &priv->bssid, &len)) { |
| memset(wrqu.ap_addr.sa_data, 0, ETH_ALEN); |
| } else { |
| /* We now have the BSSID, so can finish setting to the full |
| * associated state */ |
| memcpy(wrqu.ap_addr.sa_data, priv->bssid, ETH_ALEN); |
| memcpy(priv->ieee->bssid, priv->bssid, ETH_ALEN); |
| priv->status &= ~STATUS_ASSOCIATING; |
| priv->status |= STATUS_ASSOCIATED; |
| netif_carrier_on(priv->net_dev); |
| netif_wake_queue(priv->net_dev); |
| } |
| |
| if (!(priv->status & STATUS_ASSOCIATED)) { |
| IPW_DEBUG_WX("Configuring ESSID\n"); |
| mutex_lock(&priv->action_mutex); |
| /* This is a disassociation event, so kick the firmware to |
| * look for another AP */ |
| if (priv->config & CFG_STATIC_ESSID) |
| ipw2100_set_essid(priv, priv->essid, priv->essid_len, |
| 0); |
| else |
| ipw2100_set_essid(priv, NULL, 0, 0); |
| mutex_unlock(&priv->action_mutex); |
| } |
| |
| wireless_send_event(priv->net_dev, SIOCGIWAP, &wrqu, NULL); |
| } |
| |
| #define IPW2100_FW_MAJOR_VERSION 1 |
| #define IPW2100_FW_MINOR_VERSION 3 |
| |
| #define IPW2100_FW_MINOR(x) ((x & 0xff) >> 8) |
| #define IPW2100_FW_MAJOR(x) (x & 0xff) |
| |
| #define IPW2100_FW_VERSION ((IPW2100_FW_MINOR_VERSION << 8) | \ |
| IPW2100_FW_MAJOR_VERSION) |
| |
| #define IPW2100_FW_PREFIX "ipw2100-" __stringify(IPW2100_FW_MAJOR_VERSION) \ |
| "." __stringify(IPW2100_FW_MINOR_VERSION) |
| |
| #define IPW2100_FW_NAME(x) IPW2100_FW_PREFIX "" x ".fw" |
| |
| /* |
| |
| BINARY FIRMWARE HEADER FORMAT |
| |
| offset length desc |
| 0 2 version |
| 2 2 mode == 0:BSS,1:IBSS,2:MONITOR |
| 4 4 fw_len |
| 8 4 uc_len |
| C fw_len firmware data |
| 12 + fw_len uc_len microcode data |
| |
| */ |
| |
| struct ipw2100_fw_header { |
| short version; |
| short mode; |
| unsigned int fw_size; |
| unsigned int uc_size; |
| } __packed; |
| |
| static int ipw2100_mod_firmware_load(struct ipw2100_fw *fw) |
| { |
| struct ipw2100_fw_header *h = |
| (struct ipw2100_fw_header *)fw->fw_entry->data; |
| |
| if (IPW2100_FW_MAJOR(h->version) != IPW2100_FW_MAJOR_VERSION) { |
| printk(KERN_WARNING DRV_NAME ": Firmware image not compatible " |
| "(detected version id of %u). " |
| "See Documentation/networking/README.ipw2100\n", |
| h->version); |
| return 1; |
| } |
| |
| fw->version = h->version; |
| fw->fw.data = fw->fw_entry->data + sizeof(struct ipw2100_fw_header); |
| fw->fw.size = h->fw_size; |
| fw->uc.data = fw->fw.data + h->fw_size; |
| fw->uc.size = h->uc_size; |
| |
| return 0; |
| } |
| |
| static int ipw2100_get_firmware(struct ipw2100_priv *priv, |
| struct ipw2100_fw *fw) |
| { |
| char *fw_name; |
| int rc; |
| |
| IPW_DEBUG_INFO("%s: Using hotplug firmware load.\n", |
| priv->net_dev->name); |
| |
| switch (priv->ieee->iw_mode) { |
| case IW_MODE_ADHOC: |
| fw_name = IPW2100_FW_NAME("-i"); |
| break; |
| #ifdef CONFIG_IPW2100_MONITOR |
| case IW_MODE_MONITOR: |
| fw_name = IPW2100_FW_NAME("-p"); |
| break; |
| #endif |
| case IW_MODE_INFRA: |
| default: |
| fw_name = IPW2100_FW_NAME(""); |
| break; |
| } |
| |
| rc = request_firmware(&fw->fw_entry, fw_name, &priv->pci_dev->dev); |
| |
| if (rc < 0) { |
| printk(KERN_ERR DRV_NAME ": " |
| "%s: Firmware '%s' not available or load failed.\n", |
| priv->net_dev->name, fw_name); |
| return rc; |
| } |
| IPW_DEBUG_INFO("firmware data %p size %zd\n", fw->fw_entry->data, |
| fw->fw_entry->size); |
| |
| ipw2100_mod_firmware_load(fw); |
| |
| return 0; |
| } |
| |
| MODULE_FIRMWARE(IPW2100_FW_NAME("-i")); |
| #ifdef CONFIG_IPW2100_MONITOR |
| MODULE_FIRMWARE(IPW2100_FW_NAME("-p")); |
| #endif |
| MODULE_FIRMWARE(IPW2100_FW_NAME("")); |
| |
| static void ipw2100_release_firmware(struct ipw2100_priv *priv, |
| struct ipw2100_fw *fw) |
| { |
| fw->version = 0; |
| if (fw->fw_entry) |
| release_firmware(fw->fw_entry); |
| fw->fw_entry = NULL; |
| } |
| |
| static int ipw2100_get_fwversion(struct ipw2100_priv *priv, char *buf, |
| size_t max) |
| { |
| char ver[MAX_FW_VERSION_LEN]; |
| u32 len = MAX_FW_VERSION_LEN; |
| u32 tmp; |
| int i; |
| /* firmware version is an ascii string (max len of 14) */ |
| if (ipw2100_get_ordinal(priv, IPW_ORD_STAT_FW_VER_NUM, ver, &len)) |
| return -EIO; |
| tmp = max; |
| if (len >= max) |
| len = max - 1; |
| for (i = 0; i < len; i++) |
| buf[i] = ver[i]; |
| buf[i] = '\0'; |
| return tmp; |
| } |
| |
| static int ipw2100_get_ucodeversion(struct ipw2100_priv *priv, char *buf, |
| size_t max) |
| { |
| u32 ver; |
| u32 len = sizeof(ver); |
| /* microcode version is a 32 bit integer */ |
| if (ipw2100_get_ordinal(priv, IPW_ORD_UCODE_VERSION, &ver, &len)) |
| return -EIO; |
| return snprintf(buf, max, "%08X", ver); |
| } |
| |
| /* |
| * On exit, the firmware will have been freed from the fw list |
| */ |
| static int ipw2100_fw_download(struct ipw2100_priv *priv, struct ipw2100_fw *fw) |
| { |
| /* firmware is constructed of N contiguous entries, each entry is |
| * structured as: |
| * |
| * offset sie desc |
| * 0 4 address to write to |
| * 4 2 length of data run |
| * 6 length data |
| */ |
| unsigned int addr; |
| unsigned short len; |
| |
| const unsigned char *firmware_data = fw->fw.data; |
| unsigned int firmware_data_left = fw->fw.size; |
| |
| while (firmware_data_left > 0) { |
| addr = *(u32 *) (firmware_data); |
| firmware_data += 4; |
| firmware_data_left -= 4; |
| |
| len = *(u16 *) (firmware_data); |
| firmware_data += 2; |
| firmware_data_left -= 2; |
| |
| if (len > 32) { |
| printk(KERN_ERR DRV_NAME ": " |
| "Invalid firmware run-length of %d bytes\n", |
| len); |
| return -EINVAL; |
| } |
| |
| write_nic_memory(priv->net_dev, addr, len, firmware_data); |
| firmware_data += len; |
| firmware_data_left -= len; |
| } |
| |
| return 0; |
| } |
| |
| struct symbol_alive_response { |
| u8 cmd_id; |
| u8 seq_num; |
| u8 ucode_rev; |
| u8 eeprom_valid; |
| u16 valid_flags; |
| u8 IEEE_addr[6]; |
| u16 flags; |
| u16 pcb_rev; |
| u16 clock_settle_time; // 1us LSB |
| u16 powerup_settle_time; // 1us LSB |
| u16 hop_settle_time; // 1us LSB |
| u8 date[3]; // month, day, year |
| u8 time[2]; // hours, minutes |
| u8 ucode_valid; |
| }; |
| |
| static int ipw2100_ucode_download(struct ipw2100_priv *priv, |
| struct ipw2100_fw *fw) |
| { |
| struct net_device *dev = priv->net_dev; |
| const unsigned char *microcode_data = fw->uc.data; |
| unsigned int microcode_data_left = fw->uc.size; |
| void __iomem *reg = (void __iomem *)dev->base_addr; |
| |
| struct symbol_alive_response response; |
| int i, j; |
| u8 data; |
| |
| /* Symbol control */ |
| write_nic_word(dev, IPW2100_CONTROL_REG, 0x703); |
| readl(reg); |
| write_nic_word(dev, IPW2100_CONTROL_REG, 0x707); |
| readl(reg); |
| |
| /* HW config */ |
| write_nic_byte(dev, 0x210014, 0x72); /* fifo width =16 */ |
| readl(reg); |
| write_nic_byte(dev, 0x210014, 0x72); /* fifo width =16 */ |
| readl(reg); |
| |
| /* EN_CS_ACCESS bit to reset control store pointer */ |
| write_nic_byte(dev, 0x210000, 0x40); |
| readl(reg); |
| write_nic_byte(dev, 0x210000, 0x0); |
| readl(reg); |
| write_nic_byte(dev, 0x210000, 0x40); |
| readl(reg); |
| |
| /* copy microcode from buffer into Symbol */ |
| |
| while (microcode_data_left > 0) { |
| write_nic_byte(dev, 0x210010, *microcode_data++); |
| write_nic_byte(dev, 0x210010, *microcode_data++); |
| microcode_data_left -= 2; |
| } |
| |
| /* EN_CS_ACCESS bit to reset the control store pointer */ |
| write_nic_byte(dev, 0x210000, 0x0); |
| readl(reg); |
| |
| /* Enable System (Reg 0) |
| * first enable causes garbage in RX FIFO */ |
| write_nic_byte(dev, 0x210000, 0x0); |
| readl(reg); |
| write_nic_byte(dev, 0x210000, 0x80); |
| readl(reg); |
| |
| /* Reset External Baseband Reg */ |
| write_nic_word(dev, IPW2100_CONTROL_REG, 0x703); |
| readl(reg); |
| write_nic_word(dev, IPW2100_CONTROL_REG, 0x707); |
| readl(reg); |
| |
| /* HW Config (Reg 5) */ |
| write_nic_byte(dev, 0x210014, 0x72); // fifo width =16 |
| readl(reg); |
| write_nic_byte(dev, 0x210014, 0x72); // fifo width =16 |
| readl(reg); |
| |
| /* Enable System (Reg 0) |
| * second enable should be OK */ |
| write_nic_byte(dev, 0x210000, 0x00); // clear enable system |
| readl(reg); |
| write_nic_byte(dev, 0x210000, 0x80); // set enable system |
| |
| /* check Symbol is enabled - upped this from 5 as it wasn't always |
| * catching the update */ |
| for (i = 0; i < 10; i++) { |
| udelay(10); |
| |
| /* check Dino is enabled bit */ |
| read_nic_byte(dev, 0x210000, &data); |
| if (data & 0x1) |
| break; |
| } |
| |
| if (i == 10) { |
| printk(KERN_ERR DRV_NAME ": %s: Error initializing Symbol\n", |
| dev->name); |
| return -EIO; |
| } |
| |
| /* Get Symbol alive response */ |
| for (i = 0; i < 30; i++) { |
| /* Read alive response structure */ |
| for (j = 0; |
| j < (sizeof(struct symbol_alive_response) >> 1); j++) |
| read_nic_word(dev, 0x210004, ((u16 *) & response) + j); |
| |
| if ((response.cmd_id == 1) && (response.ucode_valid == 0x1)) |
| break; |
| udelay(10); |
| } |
| |
| if (i == 30) { |
| printk(KERN_ERR DRV_NAME |
| ": %s: No response from Symbol - hw not alive\n", |
| dev->name); |
| printk_buf(IPW_DL_ERROR, (u8 *) & response, sizeof(response)); |
| return -EIO; |
| } |
| |
| return 0; |
| } |