| /****************************************************************************** |
| * |
| * Copyright(c) 2003 - 2011 Intel Corporation. All rights reserved. |
| * |
| * Portions of this file are derived from the ipw3945 project, as well |
| * as portions of the ieee80211 subsystem header files. |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of version 2 of the GNU General Public License as |
| * published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful, but WITHOUT |
| * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or |
| * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for |
| * more details. |
| * |
| * You should have received a copy of the GNU General Public License along with |
| * this program; if not, write to the Free Software Foundation, Inc., |
| * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA |
| * |
| * The full GNU General Public License is included in this distribution in the |
| * file called LICENSE. |
| * |
| * Contact Information: |
| * Intel Linux Wireless <ilw@linux.intel.com> |
| * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 |
| * |
| *****************************************************************************/ |
| |
| #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt |
| |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/init.h> |
| #include <linux/pci.h> |
| #include <linux/pci-aspm.h> |
| #include <linux/slab.h> |
| #include <linux/dma-mapping.h> |
| #include <linux/delay.h> |
| #include <linux/sched.h> |
| #include <linux/skbuff.h> |
| #include <linux/netdevice.h> |
| #include <linux/wireless.h> |
| #include <linux/firmware.h> |
| #include <linux/etherdevice.h> |
| #include <linux/if_arp.h> |
| |
| #include <net/mac80211.h> |
| |
| #include <asm/div64.h> |
| |
| #define DRV_NAME "iwl4965" |
| |
| #include "iwl-eeprom.h" |
| #include "iwl-dev.h" |
| #include "iwl-core.h" |
| #include "iwl-io.h" |
| #include "iwl-helpers.h" |
| #include "iwl-sta.h" |
| #include "iwl-4965-calib.h" |
| #include "iwl-4965.h" |
| #include "iwl-4965-led.h" |
| |
| |
| /****************************************************************************** |
| * |
| * module boiler plate |
| * |
| ******************************************************************************/ |
| |
| /* |
| * module name, copyright, version, etc. |
| */ |
| #define DRV_DESCRIPTION "Intel(R) Wireless WiFi 4965 driver for Linux" |
| |
| #ifdef CONFIG_IWLWIFI_LEGACY_DEBUG |
| #define VD "d" |
| #else |
| #define VD |
| #endif |
| |
| #define DRV_VERSION IWLWIFI_VERSION VD |
| |
| |
| MODULE_DESCRIPTION(DRV_DESCRIPTION); |
| MODULE_VERSION(DRV_VERSION); |
| MODULE_AUTHOR(DRV_COPYRIGHT " " DRV_AUTHOR); |
| MODULE_LICENSE("GPL"); |
| MODULE_ALIAS("iwl4965"); |
| |
| void iwl4965_update_chain_flags(struct iwl_priv *priv) |
| { |
| struct iwl_rxon_context *ctx; |
| |
| if (priv->cfg->ops->hcmd->set_rxon_chain) { |
| for_each_context(priv, ctx) { |
| priv->cfg->ops->hcmd->set_rxon_chain(priv, ctx); |
| if (ctx->active.rx_chain != ctx->staging.rx_chain) |
| iwl_legacy_commit_rxon(priv, ctx); |
| } |
| } |
| } |
| |
| static void iwl4965_clear_free_frames(struct iwl_priv *priv) |
| { |
| struct list_head *element; |
| |
| IWL_DEBUG_INFO(priv, "%d frames on pre-allocated heap on clear.\n", |
| priv->frames_count); |
| |
| while (!list_empty(&priv->free_frames)) { |
| element = priv->free_frames.next; |
| list_del(element); |
| kfree(list_entry(element, struct iwl_frame, list)); |
| priv->frames_count--; |
| } |
| |
| if (priv->frames_count) { |
| IWL_WARN(priv, "%d frames still in use. Did we lose one?\n", |
| priv->frames_count); |
| priv->frames_count = 0; |
| } |
| } |
| |
| static struct iwl_frame *iwl4965_get_free_frame(struct iwl_priv *priv) |
| { |
| struct iwl_frame *frame; |
| struct list_head *element; |
| if (list_empty(&priv->free_frames)) { |
| frame = kzalloc(sizeof(*frame), GFP_KERNEL); |
| if (!frame) { |
| IWL_ERR(priv, "Could not allocate frame!\n"); |
| return NULL; |
| } |
| |
| priv->frames_count++; |
| return frame; |
| } |
| |
| element = priv->free_frames.next; |
| list_del(element); |
| return list_entry(element, struct iwl_frame, list); |
| } |
| |
| static void iwl4965_free_frame(struct iwl_priv *priv, struct iwl_frame *frame) |
| { |
| memset(frame, 0, sizeof(*frame)); |
| list_add(&frame->list, &priv->free_frames); |
| } |
| |
| static u32 iwl4965_fill_beacon_frame(struct iwl_priv *priv, |
| struct ieee80211_hdr *hdr, |
| int left) |
| { |
| lockdep_assert_held(&priv->mutex); |
| |
| if (!priv->beacon_skb) |
| return 0; |
| |
| if (priv->beacon_skb->len > left) |
| return 0; |
| |
| memcpy(hdr, priv->beacon_skb->data, priv->beacon_skb->len); |
| |
| return priv->beacon_skb->len; |
| } |
| |
| /* Parse the beacon frame to find the TIM element and set tim_idx & tim_size */ |
| static void iwl4965_set_beacon_tim(struct iwl_priv *priv, |
| struct iwl_tx_beacon_cmd *tx_beacon_cmd, |
| u8 *beacon, u32 frame_size) |
| { |
| u16 tim_idx; |
| struct ieee80211_mgmt *mgmt = (struct ieee80211_mgmt *)beacon; |
| |
| /* |
| * The index is relative to frame start but we start looking at the |
| * variable-length part of the beacon. |
| */ |
| tim_idx = mgmt->u.beacon.variable - beacon; |
| |
| /* Parse variable-length elements of beacon to find WLAN_EID_TIM */ |
| while ((tim_idx < (frame_size - 2)) && |
| (beacon[tim_idx] != WLAN_EID_TIM)) |
| tim_idx += beacon[tim_idx+1] + 2; |
| |
| /* If TIM field was found, set variables */ |
| if ((tim_idx < (frame_size - 1)) && (beacon[tim_idx] == WLAN_EID_TIM)) { |
| tx_beacon_cmd->tim_idx = cpu_to_le16(tim_idx); |
| tx_beacon_cmd->tim_size = beacon[tim_idx+1]; |
| } else |
| IWL_WARN(priv, "Unable to find TIM Element in beacon\n"); |
| } |
| |
| static unsigned int iwl4965_hw_get_beacon_cmd(struct iwl_priv *priv, |
| struct iwl_frame *frame) |
| { |
| struct iwl_tx_beacon_cmd *tx_beacon_cmd; |
| u32 frame_size; |
| u32 rate_flags; |
| u32 rate; |
| /* |
| * We have to set up the TX command, the TX Beacon command, and the |
| * beacon contents. |
| */ |
| |
| lockdep_assert_held(&priv->mutex); |
| |
| if (!priv->beacon_ctx) { |
| IWL_ERR(priv, "trying to build beacon w/o beacon context!\n"); |
| return 0; |
| } |
| |
| /* Initialize memory */ |
| tx_beacon_cmd = &frame->u.beacon; |
| memset(tx_beacon_cmd, 0, sizeof(*tx_beacon_cmd)); |
| |
| /* Set up TX beacon contents */ |
| frame_size = iwl4965_fill_beacon_frame(priv, tx_beacon_cmd->frame, |
| sizeof(frame->u) - sizeof(*tx_beacon_cmd)); |
| if (WARN_ON_ONCE(frame_size > MAX_MPDU_SIZE)) |
| return 0; |
| if (!frame_size) |
| return 0; |
| |
| /* Set up TX command fields */ |
| tx_beacon_cmd->tx.len = cpu_to_le16((u16)frame_size); |
| tx_beacon_cmd->tx.sta_id = priv->beacon_ctx->bcast_sta_id; |
| tx_beacon_cmd->tx.stop_time.life_time = TX_CMD_LIFE_TIME_INFINITE; |
| tx_beacon_cmd->tx.tx_flags = TX_CMD_FLG_SEQ_CTL_MSK | |
| TX_CMD_FLG_TSF_MSK | TX_CMD_FLG_STA_RATE_MSK; |
| |
| /* Set up TX beacon command fields */ |
| iwl4965_set_beacon_tim(priv, tx_beacon_cmd, (u8 *)tx_beacon_cmd->frame, |
| frame_size); |
| |
| /* Set up packet rate and flags */ |
| rate = iwl_legacy_get_lowest_plcp(priv, priv->beacon_ctx); |
| priv->mgmt_tx_ant = iwl4965_toggle_tx_ant(priv, priv->mgmt_tx_ant, |
| priv->hw_params.valid_tx_ant); |
| rate_flags = iwl4965_ant_idx_to_flags(priv->mgmt_tx_ant); |
| if ((rate >= IWL_FIRST_CCK_RATE) && (rate <= IWL_LAST_CCK_RATE)) |
| rate_flags |= RATE_MCS_CCK_MSK; |
| tx_beacon_cmd->tx.rate_n_flags = iwl4965_hw_set_rate_n_flags(rate, |
| rate_flags); |
| |
| return sizeof(*tx_beacon_cmd) + frame_size; |
| } |
| |
| int iwl4965_send_beacon_cmd(struct iwl_priv *priv) |
| { |
| struct iwl_frame *frame; |
| unsigned int frame_size; |
| int rc; |
| |
| frame = iwl4965_get_free_frame(priv); |
| if (!frame) { |
| IWL_ERR(priv, "Could not obtain free frame buffer for beacon " |
| "command.\n"); |
| return -ENOMEM; |
| } |
| |
| frame_size = iwl4965_hw_get_beacon_cmd(priv, frame); |
| if (!frame_size) { |
| IWL_ERR(priv, "Error configuring the beacon command\n"); |
| iwl4965_free_frame(priv, frame); |
| return -EINVAL; |
| } |
| |
| rc = iwl_legacy_send_cmd_pdu(priv, REPLY_TX_BEACON, frame_size, |
| &frame->u.cmd[0]); |
| |
| iwl4965_free_frame(priv, frame); |
| |
| return rc; |
| } |
| |
| static inline dma_addr_t iwl4965_tfd_tb_get_addr(struct iwl_tfd *tfd, u8 idx) |
| { |
| struct iwl_tfd_tb *tb = &tfd->tbs[idx]; |
| |
| dma_addr_t addr = get_unaligned_le32(&tb->lo); |
| if (sizeof(dma_addr_t) > sizeof(u32)) |
| addr |= |
| ((dma_addr_t)(le16_to_cpu(tb->hi_n_len) & 0xF) << 16) << 16; |
| |
| return addr; |
| } |
| |
| static inline u16 iwl4965_tfd_tb_get_len(struct iwl_tfd *tfd, u8 idx) |
| { |
| struct iwl_tfd_tb *tb = &tfd->tbs[idx]; |
| |
| return le16_to_cpu(tb->hi_n_len) >> 4; |
| } |
| |
| static inline void iwl4965_tfd_set_tb(struct iwl_tfd *tfd, u8 idx, |
| dma_addr_t addr, u16 len) |
| { |
| struct iwl_tfd_tb *tb = &tfd->tbs[idx]; |
| u16 hi_n_len = len << 4; |
| |
| put_unaligned_le32(addr, &tb->lo); |
| if (sizeof(dma_addr_t) > sizeof(u32)) |
| hi_n_len |= ((addr >> 16) >> 16) & 0xF; |
| |
| tb->hi_n_len = cpu_to_le16(hi_n_len); |
| |
| tfd->num_tbs = idx + 1; |
| } |
| |
| static inline u8 iwl4965_tfd_get_num_tbs(struct iwl_tfd *tfd) |
| { |
| return tfd->num_tbs & 0x1f; |
| } |
| |
| /** |
| * iwl4965_hw_txq_free_tfd - Free all chunks referenced by TFD [txq->q.read_ptr] |
| * @priv - driver private data |
| * @txq - tx queue |
| * |
| * Does NOT advance any TFD circular buffer read/write indexes |
| * Does NOT free the TFD itself (which is within circular buffer) |
| */ |
| void iwl4965_hw_txq_free_tfd(struct iwl_priv *priv, struct iwl_tx_queue *txq) |
| { |
| struct iwl_tfd *tfd_tmp = (struct iwl_tfd *)txq->tfds; |
| struct iwl_tfd *tfd; |
| struct pci_dev *dev = priv->pci_dev; |
| int index = txq->q.read_ptr; |
| int i; |
| int num_tbs; |
| |
| tfd = &tfd_tmp[index]; |
| |
| /* Sanity check on number of chunks */ |
| num_tbs = iwl4965_tfd_get_num_tbs(tfd); |
| |
| if (num_tbs >= IWL_NUM_OF_TBS) { |
| IWL_ERR(priv, "Too many chunks: %i\n", num_tbs); |
| /* @todo issue fatal error, it is quite serious situation */ |
| return; |
| } |
| |
| /* Unmap tx_cmd */ |
| if (num_tbs) |
| pci_unmap_single(dev, |
| dma_unmap_addr(&txq->meta[index], mapping), |
| dma_unmap_len(&txq->meta[index], len), |
| PCI_DMA_BIDIRECTIONAL); |
| |
| /* Unmap chunks, if any. */ |
| for (i = 1; i < num_tbs; i++) |
| pci_unmap_single(dev, iwl4965_tfd_tb_get_addr(tfd, i), |
| iwl4965_tfd_tb_get_len(tfd, i), |
| PCI_DMA_TODEVICE); |
| |
| /* free SKB */ |
| if (txq->txb) { |
| struct sk_buff *skb; |
| |
| skb = txq->txb[txq->q.read_ptr].skb; |
| |
| /* can be called from irqs-disabled context */ |
| if (skb) { |
| dev_kfree_skb_any(skb); |
| txq->txb[txq->q.read_ptr].skb = NULL; |
| } |
| } |
| } |
| |
| int iwl4965_hw_txq_attach_buf_to_tfd(struct iwl_priv *priv, |
| struct iwl_tx_queue *txq, |
| dma_addr_t addr, u16 len, |
| u8 reset, u8 pad) |
| { |
| struct iwl_queue *q; |
| struct iwl_tfd *tfd, *tfd_tmp; |
| u32 num_tbs; |
| |
| q = &txq->q; |
| tfd_tmp = (struct iwl_tfd *)txq->tfds; |
| tfd = &tfd_tmp[q->write_ptr]; |
| |
| if (reset) |
| memset(tfd, 0, sizeof(*tfd)); |
| |
| num_tbs = iwl4965_tfd_get_num_tbs(tfd); |
| |
| /* Each TFD can point to a maximum 20 Tx buffers */ |
| if (num_tbs >= IWL_NUM_OF_TBS) { |
| IWL_ERR(priv, "Error can not send more than %d chunks\n", |
| IWL_NUM_OF_TBS); |
| return -EINVAL; |
| } |
| |
| BUG_ON(addr & ~DMA_BIT_MASK(36)); |
| if (unlikely(addr & ~IWL_TX_DMA_MASK)) |
| IWL_ERR(priv, "Unaligned address = %llx\n", |
| (unsigned long long)addr); |
| |
| iwl4965_tfd_set_tb(tfd, num_tbs, addr, len); |
| |
| return 0; |
| } |
| |
| /* |
| * Tell nic where to find circular buffer of Tx Frame Descriptors for |
| * given Tx queue, and enable the DMA channel used for that queue. |
| * |
| * 4965 supports up to 16 Tx queues in DRAM, mapped to up to 8 Tx DMA |
| * channels supported in hardware. |
| */ |
| int iwl4965_hw_tx_queue_init(struct iwl_priv *priv, |
| struct iwl_tx_queue *txq) |
| { |
| int txq_id = txq->q.id; |
| |
| /* Circular buffer (TFD queue in DRAM) physical base address */ |
| iwl_legacy_write_direct32(priv, FH_MEM_CBBC_QUEUE(txq_id), |
| txq->q.dma_addr >> 8); |
| |
| return 0; |
| } |
| |
| /****************************************************************************** |
| * |
| * Generic RX handler implementations |
| * |
| ******************************************************************************/ |
| static void iwl4965_rx_reply_alive(struct iwl_priv *priv, |
| struct iwl_rx_mem_buffer *rxb) |
| { |
| struct iwl_rx_packet *pkt = rxb_addr(rxb); |
| struct iwl_alive_resp *palive; |
| struct delayed_work *pwork; |
| |
| palive = &pkt->u.alive_frame; |
| |
| IWL_DEBUG_INFO(priv, "Alive ucode status 0x%08X revision " |
| "0x%01X 0x%01X\n", |
| palive->is_valid, palive->ver_type, |
| palive->ver_subtype); |
| |
| if (palive->ver_subtype == INITIALIZE_SUBTYPE) { |
| IWL_DEBUG_INFO(priv, "Initialization Alive received.\n"); |
| memcpy(&priv->card_alive_init, |
| &pkt->u.alive_frame, |
| sizeof(struct iwl_init_alive_resp)); |
| pwork = &priv->init_alive_start; |
| } else { |
| IWL_DEBUG_INFO(priv, "Runtime Alive received.\n"); |
| memcpy(&priv->card_alive, &pkt->u.alive_frame, |
| sizeof(struct iwl_alive_resp)); |
| pwork = &priv->alive_start; |
| } |
| |
| /* We delay the ALIVE response by 5ms to |
| * give the HW RF Kill time to activate... */ |
| if (palive->is_valid == UCODE_VALID_OK) |
| queue_delayed_work(priv->workqueue, pwork, |
| msecs_to_jiffies(5)); |
| else |
| IWL_WARN(priv, "uCode did not respond OK.\n"); |
| } |
| |
| /** |
| * iwl4965_bg_statistics_periodic - Timer callback to queue statistics |
| * |
| * This callback is provided in order to send a statistics request. |
| * |
| * This timer function is continually reset to execute within |
| * REG_RECALIB_PERIOD seconds since the last STATISTICS_NOTIFICATION |
| * was received. We need to ensure we receive the statistics in order |
| * to update the temperature used for calibrating the TXPOWER. |
| */ |
| static void iwl4965_bg_statistics_periodic(unsigned long data) |
| { |
| struct iwl_priv *priv = (struct iwl_priv *)data; |
| |
| if (test_bit(STATUS_EXIT_PENDING, &priv->status)) |
| return; |
| |
| /* dont send host command if rf-kill is on */ |
| if (!iwl_legacy_is_ready_rf(priv)) |
| return; |
| |
| iwl_legacy_send_statistics_request(priv, CMD_ASYNC, false); |
| } |
| |
| |
| static void iwl4965_print_cont_event_trace(struct iwl_priv *priv, u32 base, |
| u32 start_idx, u32 num_events, |
| u32 mode) |
| { |
| u32 i; |
| u32 ptr; /* SRAM byte address of log data */ |
| u32 ev, time, data; /* event log data */ |
| unsigned long reg_flags; |
| |
| if (mode == 0) |
| ptr = base + (4 * sizeof(u32)) + (start_idx * 2 * sizeof(u32)); |
| else |
| ptr = base + (4 * sizeof(u32)) + (start_idx * 3 * sizeof(u32)); |
| |
| /* Make sure device is powered up for SRAM reads */ |
| spin_lock_irqsave(&priv->reg_lock, reg_flags); |
| if (iwl_grab_nic_access(priv)) { |
| spin_unlock_irqrestore(&priv->reg_lock, reg_flags); |
| return; |
| } |
| |
| /* Set starting address; reads will auto-increment */ |
| _iwl_legacy_write_direct32(priv, HBUS_TARG_MEM_RADDR, ptr); |
| rmb(); |
| |
| /* |
| * "time" is actually "data" for mode 0 (no timestamp). |
| * place event id # at far right for easier visual parsing. |
| */ |
| for (i = 0; i < num_events; i++) { |
| ev = _iwl_legacy_read_direct32(priv, HBUS_TARG_MEM_RDAT); |
| time = _iwl_legacy_read_direct32(priv, HBUS_TARG_MEM_RDAT); |
| if (mode == 0) { |
| trace_iwlwifi_legacy_dev_ucode_cont_event(priv, |
| 0, time, ev); |
| } else { |
| data = _iwl_legacy_read_direct32(priv, |
| HBUS_TARG_MEM_RDAT); |
| trace_iwlwifi_legacy_dev_ucode_cont_event(priv, |
| time, data, ev); |
| } |
| } |
| /* Allow device to power down */ |
| iwl_release_nic_access(priv); |
| spin_unlock_irqrestore(&priv->reg_lock, reg_flags); |
| } |
| |
| static void iwl4965_continuous_event_trace(struct iwl_priv *priv) |
| { |
| u32 capacity; /* event log capacity in # entries */ |
| u32 base; /* SRAM byte address of event log header */ |
| u32 mode; /* 0 - no timestamp, 1 - timestamp recorded */ |
| u32 num_wraps; /* # times uCode wrapped to top of log */ |
| u32 next_entry; /* index of next entry to be written by uCode */ |
| |
| if (priv->ucode_type == UCODE_INIT) |
| base = le32_to_cpu(priv->card_alive_init.error_event_table_ptr); |
| else |
| base = le32_to_cpu(priv->card_alive.log_event_table_ptr); |
| if (priv->cfg->ops->lib->is_valid_rtc_data_addr(base)) { |
| capacity = iwl_legacy_read_targ_mem(priv, base); |
| num_wraps = iwl_legacy_read_targ_mem(priv, |
| base + (2 * sizeof(u32))); |
| mode = iwl_legacy_read_targ_mem(priv, base + (1 * sizeof(u32))); |
| next_entry = iwl_legacy_read_targ_mem(priv, |
| base + (3 * sizeof(u32))); |
| } else |
| return; |
| |
| if (num_wraps == priv->event_log.num_wraps) { |
| iwl4965_print_cont_event_trace(priv, |
| base, priv->event_log.next_entry, |
| next_entry - priv->event_log.next_entry, |
| mode); |
| priv->event_log.non_wraps_count++; |
| } else { |
| if ((num_wraps - priv->event_log.num_wraps) > 1) |
| priv->event_log.wraps_more_count++; |
| else |
| priv->event_log.wraps_once_count++; |
| trace_iwlwifi_legacy_dev_ucode_wrap_event(priv, |
| num_wraps - priv->event_log.num_wraps, |
| next_entry, priv->event_log.next_entry); |
| if (next_entry < priv->event_log.next_entry) { |
| iwl4965_print_cont_event_trace(priv, base, |
| priv->event_log.next_entry, |
| capacity - priv->event_log.next_entry, |
| mode); |
| |
| iwl4965_print_cont_event_trace(priv, base, 0, |
| next_entry, mode); |
| } else { |
| iwl4965_print_cont_event_trace(priv, base, |
| next_entry, capacity - next_entry, |
| mode); |
| |
| iwl4965_print_cont_event_trace(priv, base, 0, |
| next_entry, mode); |
| } |
| } |
| priv->event_log.num_wraps = num_wraps; |
| priv->event_log.next_entry = next_entry; |
| } |
| |
| /** |
| * iwl4965_bg_ucode_trace - Timer callback to log ucode event |
| * |
| * The timer is continually set to execute every |
| * UCODE_TRACE_PERIOD milliseconds after the last timer expired |
| * this function is to perform continuous uCode event logging operation |
| * if enabled |
| */ |
| static void iwl4965_bg_ucode_trace(unsigned long data) |
| { |
| struct iwl_priv *priv = (struct iwl_priv *)data; |
| |
| if (test_bit(STATUS_EXIT_PENDING, &priv->status)) |
| return; |
| |
| if (priv->event_log.ucode_trace) { |
| iwl4965_continuous_event_trace(priv); |
| /* Reschedule the timer to occur in UCODE_TRACE_PERIOD */ |
| mod_timer(&priv->ucode_trace, |
| jiffies + msecs_to_jiffies(UCODE_TRACE_PERIOD)); |
| } |
| } |
| |
| static void iwl4965_rx_beacon_notif(struct iwl_priv *priv, |
| struct iwl_rx_mem_buffer *rxb) |
| { |
| struct iwl_rx_packet *pkt = rxb_addr(rxb); |
| struct iwl4965_beacon_notif *beacon = |
| (struct iwl4965_beacon_notif *)pkt->u.raw; |
| #ifdef CONFIG_IWLWIFI_LEGACY_DEBUG |
| u8 rate = iwl4965_hw_get_rate(beacon->beacon_notify_hdr.rate_n_flags); |
| |
| IWL_DEBUG_RX(priv, "beacon status %x retries %d iss %d " |
| "tsf %d %d rate %d\n", |
| le32_to_cpu(beacon->beacon_notify_hdr.u.status) & TX_STATUS_MSK, |
| beacon->beacon_notify_hdr.failure_frame, |
| le32_to_cpu(beacon->ibss_mgr_status), |
| le32_to_cpu(beacon->high_tsf), |
| le32_to_cpu(beacon->low_tsf), rate); |
| #endif |
| |
| priv->ibss_manager = le32_to_cpu(beacon->ibss_mgr_status); |
| } |
| |
| static void iwl4965_perform_ct_kill_task(struct iwl_priv *priv) |
| { |
| unsigned long flags; |
| |
| IWL_DEBUG_POWER(priv, "Stop all queues\n"); |
| |
| if (priv->mac80211_registered) |
| ieee80211_stop_queues(priv->hw); |
| |
| iwl_write32(priv, CSR_UCODE_DRV_GP1_SET, |
| CSR_UCODE_DRV_GP1_REG_BIT_CT_KILL_EXIT); |
| iwl_read32(priv, CSR_UCODE_DRV_GP1); |
| |
| spin_lock_irqsave(&priv->reg_lock, flags); |
| if (!iwl_grab_nic_access(priv)) |
| iwl_release_nic_access(priv); |
| spin_unlock_irqrestore(&priv->reg_lock, flags); |
| } |
| |
| /* Handle notification from uCode that card's power state is changing |
| * due to software, hardware, or critical temperature RFKILL */ |
| static void iwl4965_rx_card_state_notif(struct iwl_priv *priv, |
| struct iwl_rx_mem_buffer *rxb) |
| { |
| struct iwl_rx_packet *pkt = rxb_addr(rxb); |
| u32 flags = le32_to_cpu(pkt->u.card_state_notif.flags); |
| unsigned long status = priv->status; |
| |
| IWL_DEBUG_RF_KILL(priv, "Card state received: HW:%s SW:%s CT:%s\n", |
| (flags & HW_CARD_DISABLED) ? "Kill" : "On", |
| (flags & SW_CARD_DISABLED) ? "Kill" : "On", |
| (flags & CT_CARD_DISABLED) ? |
| "Reached" : "Not reached"); |
| |
| if (flags & (SW_CARD_DISABLED | HW_CARD_DISABLED | |
| CT_CARD_DISABLED)) { |
| |
| iwl_write32(priv, CSR_UCODE_DRV_GP1_SET, |
| CSR_UCODE_DRV_GP1_BIT_CMD_BLOCKED); |
| |
| iwl_legacy_write_direct32(priv, HBUS_TARG_MBX_C, |
| HBUS_TARG_MBX_C_REG_BIT_CMD_BLOCKED); |
| |
| if (!(flags & RXON_CARD_DISABLED)) { |
| iwl_write32(priv, CSR_UCODE_DRV_GP1_CLR, |
| CSR_UCODE_DRV_GP1_BIT_CMD_BLOCKED); |
| iwl_legacy_write_direct32(priv, HBUS_TARG_MBX_C, |
| HBUS_TARG_MBX_C_REG_BIT_CMD_BLOCKED); |
| } |
| } |
| |
| if (flags & CT_CARD_DISABLED) |
| iwl4965_perform_ct_kill_task(priv); |
| |
| if (flags & HW_CARD_DISABLED) |
| set_bit(STATUS_RF_KILL_HW, &priv->status); |
| else |
| clear_bit(STATUS_RF_KILL_HW, &priv->status); |
| |
| if (!(flags & RXON_CARD_DISABLED)) |
| iwl_legacy_scan_cancel(priv); |
| |
| if ((test_bit(STATUS_RF_KILL_HW, &status) != |
| test_bit(STATUS_RF_KILL_HW, &priv->status))) |
| wiphy_rfkill_set_hw_state(priv->hw->wiphy, |
| test_bit(STATUS_RF_KILL_HW, &priv->status)); |
| else |
| wake_up_interruptible(&priv->wait_command_queue); |
| } |
| |
| /** |
| * iwl4965_setup_rx_handlers - Initialize Rx handler callbacks |
| * |
| * Setup the RX handlers for each of the reply types sent from the uCode |
| * to the host. |
| * |
| * This function chains into the hardware specific files for them to setup |
| * any hardware specific handlers as well. |
| */ |
| static void iwl4965_setup_rx_handlers(struct iwl_priv *priv) |
| { |
| priv->rx_handlers[REPLY_ALIVE] = iwl4965_rx_reply_alive; |
| priv->rx_handlers[REPLY_ERROR] = iwl_legacy_rx_reply_error; |
| priv->rx_handlers[CHANNEL_SWITCH_NOTIFICATION] = iwl_legacy_rx_csa; |
| priv->rx_handlers[SPECTRUM_MEASURE_NOTIFICATION] = |
| iwl_legacy_rx_spectrum_measure_notif; |
| priv->rx_handlers[PM_SLEEP_NOTIFICATION] = iwl_legacy_rx_pm_sleep_notif; |
| priv->rx_handlers[PM_DEBUG_STATISTIC_NOTIFIC] = |
| iwl_legacy_rx_pm_debug_statistics_notif; |
| priv->rx_handlers[BEACON_NOTIFICATION] = iwl4965_rx_beacon_notif; |
| |
| /* |
| * The same handler is used for both the REPLY to a discrete |
| * statistics request from the host as well as for the periodic |
| * statistics notifications (after received beacons) from the uCode. |
| */ |
| priv->rx_handlers[REPLY_STATISTICS_CMD] = iwl4965_reply_statistics; |
| priv->rx_handlers[STATISTICS_NOTIFICATION] = iwl4965_rx_statistics; |
| |
| iwl_legacy_setup_rx_scan_handlers(priv); |
| |
| /* status change handler */ |
| priv->rx_handlers[CARD_STATE_NOTIFICATION] = |
| iwl4965_rx_card_state_notif; |
| |
| priv->rx_handlers[MISSED_BEACONS_NOTIFICATION] = |
| iwl4965_rx_missed_beacon_notif; |
| /* Rx handlers */ |
| priv->rx_handlers[REPLY_RX_PHY_CMD] = iwl4965_rx_reply_rx_phy; |
| priv->rx_handlers[REPLY_RX_MPDU_CMD] = iwl4965_rx_reply_rx; |
| /* block ack */ |
| priv->rx_handlers[REPLY_COMPRESSED_BA] = iwl4965_rx_reply_compressed_ba; |
| /* Set up hardware specific Rx handlers */ |
| priv->cfg->ops->lib->rx_handler_setup(priv); |
| } |
| |
| /** |
| * iwl4965_rx_handle - Main entry function for receiving responses from uCode |
| * |
| * Uses the priv->rx_handlers callback function array to invoke |
| * the appropriate handlers, including command responses, |
| * frame-received notifications, and other notifications. |
| */ |
| void iwl4965_rx_handle(struct iwl_priv *priv) |
| { |
| struct iwl_rx_mem_buffer *rxb; |
| struct iwl_rx_packet *pkt; |
| struct iwl_rx_queue *rxq = &priv->rxq; |
| u32 r, i; |
| int reclaim; |
| unsigned long flags; |
| u8 fill_rx = 0; |
| u32 count = 8; |
| int total_empty; |
| |
| /* uCode's read index (stored in shared DRAM) indicates the last Rx |
| * buffer that the driver may process (last buffer filled by ucode). */ |
| r = le16_to_cpu(rxq->rb_stts->closed_rb_num) & 0x0FFF; |
| i = rxq->read; |
| |
| /* Rx interrupt, but nothing sent from uCode */ |
| if (i == r) |
| IWL_DEBUG_RX(priv, "r = %d, i = %d\n", r, i); |
| |
| /* calculate total frames need to be restock after handling RX */ |
| total_empty = r - rxq->write_actual; |
| if (total_empty < 0) |
| total_empty += RX_QUEUE_SIZE; |
| |
| if (total_empty > (RX_QUEUE_SIZE / 2)) |
| fill_rx = 1; |
| |
| while (i != r) { |
| int len; |
| |
| rxb = rxq->queue[i]; |
| |
| /* If an RXB doesn't have a Rx queue slot associated with it, |
| * then a bug has been introduced in the queue refilling |
| * routines -- catch it here */ |
| BUG_ON(rxb == NULL); |
| |
| rxq->queue[i] = NULL; |
| |
| pci_unmap_page(priv->pci_dev, rxb->page_dma, |
| PAGE_SIZE << priv->hw_params.rx_page_order, |
| PCI_DMA_FROMDEVICE); |
| pkt = rxb_addr(rxb); |
| |
| len = le32_to_cpu(pkt->len_n_flags) & FH_RSCSR_FRAME_SIZE_MSK; |
| len += sizeof(u32); /* account for status word */ |
| trace_iwlwifi_legacy_dev_rx(priv, pkt, len); |
| |
| /* Reclaim a command buffer only if this packet is a response |
| * to a (driver-originated) command. |
| * If the packet (e.g. Rx frame) originated from uCode, |
| * there is no command buffer to reclaim. |
| * Ucode should set SEQ_RX_FRAME bit if ucode-originated, |
| * but apparently a few don't get set; catch them here. */ |
| reclaim = !(pkt->hdr.sequence & SEQ_RX_FRAME) && |
| (pkt->hdr.cmd != REPLY_RX_PHY_CMD) && |
| (pkt->hdr.cmd != REPLY_RX) && |
| (pkt->hdr.cmd != REPLY_RX_MPDU_CMD) && |
| (pkt->hdr.cmd != REPLY_COMPRESSED_BA) && |
| (pkt->hdr.cmd != STATISTICS_NOTIFICATION) && |
| (pkt->hdr.cmd != REPLY_TX); |
| |
| /* Based on type of command response or notification, |
| * handle those that need handling via function in |
| * rx_handlers table. See iwl4965_setup_rx_handlers() */ |
| if (priv->rx_handlers[pkt->hdr.cmd]) { |
| IWL_DEBUG_RX(priv, "r = %d, i = %d, %s, 0x%02x\n", r, |
| i, iwl_legacy_get_cmd_string(pkt->hdr.cmd), |
| pkt->hdr.cmd); |
| priv->isr_stats.rx_handlers[pkt->hdr.cmd]++; |
| priv->rx_handlers[pkt->hdr.cmd] (priv, rxb); |
| } else { |
| /* No handling needed */ |
| IWL_DEBUG_RX(priv, |
| "r %d i %d No handler needed for %s, 0x%02x\n", |
| r, i, iwl_legacy_get_cmd_string(pkt->hdr.cmd), |
| pkt->hdr.cmd); |
| } |
| |
| /* |
| * XXX: After here, we should always check rxb->page |
| * against NULL before touching it or its virtual |
| * memory (pkt). Because some rx_handler might have |
| * already taken or freed the pages. |
| */ |
| |
| if (reclaim) { |
| /* Invoke any callbacks, transfer the buffer to caller, |
| * and fire off the (possibly) blocking iwl_legacy_send_cmd() |
| * as we reclaim the driver command queue */ |
| if (rxb->page) |
| iwl_legacy_tx_cmd_complete(priv, rxb); |
| else |
| IWL_WARN(priv, "Claim null rxb?\n"); |
| } |
| |
| /* Reuse the page if possible. For notification packets and |
| * SKBs that fail to Rx correctly, add them back into the |
| * rx_free list for reuse later. */ |
| spin_lock_irqsave(&rxq->lock, flags); |
| if (rxb->page != NULL) { |
| rxb->page_dma = pci_map_page(priv->pci_dev, rxb->page, |
| 0, PAGE_SIZE << priv->hw_params.rx_page_order, |
| PCI_DMA_FROMDEVICE); |
| list_add_tail(&rxb->list, &rxq->rx_free); |
| rxq->free_count++; |
| } else |
| list_add_tail(&rxb->list, &rxq->rx_used); |
| |
| spin_unlock_irqrestore(&rxq->lock, flags); |
| |
| i = (i + 1) & RX_QUEUE_MASK; |
| /* If there are a lot of unused frames, |
| * restock the Rx queue so ucode wont assert. */ |
| if (fill_rx) { |
| count++; |
| if (count >= 8) { |
| rxq->read = i; |
| iwl4965_rx_replenish_now(priv); |
| count = 0; |
| } |
| } |
| } |
| |
| /* Backtrack one entry */ |
| rxq->read = i; |
| if (fill_rx) |
| iwl4965_rx_replenish_now(priv); |
| else |
| iwl4965_rx_queue_restock(priv); |
| } |
| |
| /* call this function to flush any scheduled tasklet */ |
| static inline void iwl4965_synchronize_irq(struct iwl_priv *priv) |
| { |
| /* wait to make sure we flush pending tasklet*/ |
| synchronize_irq(priv->pci_dev->irq); |
| tasklet_kill(&priv->irq_tasklet); |
| } |
| |
| static void iwl4965_irq_tasklet(struct iwl_priv *priv) |
| { |
| u32 inta, handled = 0; |
| u32 inta_fh; |
| unsigned long flags; |
| u32 i; |
| #ifdef CONFIG_IWLWIFI_LEGACY_DEBUG |
| u32 inta_mask; |
| #endif |
| |
| spin_lock_irqsave(&priv->lock, flags); |
| |
| /* Ack/clear/reset pending uCode interrupts. |
| * Note: Some bits in CSR_INT are "OR" of bits in CSR_FH_INT_STATUS, |
| * and will clear only when CSR_FH_INT_STATUS gets cleared. */ |
| inta = iwl_read32(priv, CSR_INT); |
| iwl_write32(priv, CSR_INT, inta); |
| |
| /* Ack/clear/reset pending flow-handler (DMA) interrupts. |
| * Any new interrupts that happen after this, either while we're |
| * in this tasklet, or later, will show up in next ISR/tasklet. */ |
| inta_fh = iwl_read32(priv, CSR_FH_INT_STATUS); |
| iwl_write32(priv, CSR_FH_INT_STATUS, inta_fh); |
| |
| #ifdef CONFIG_IWLWIFI_LEGACY_DEBUG |
| if (iwl_legacy_get_debug_level(priv) & IWL_DL_ISR) { |
| /* just for debug */ |
| inta_mask = iwl_read32(priv, CSR_INT_MASK); |
| IWL_DEBUG_ISR(priv, "inta 0x%08x, enabled 0x%08x, fh 0x%08x\n", |
| inta, inta_mask, inta_fh); |
| } |
| #endif |
| |
| spin_unlock_irqrestore(&priv->lock, flags); |
| |
| /* Since CSR_INT and CSR_FH_INT_STATUS reads and clears are not |
| * atomic, make sure that inta covers all the interrupts that |
| * we've discovered, even if FH interrupt came in just after |
| * reading CSR_INT. */ |
| if (inta_fh & CSR49_FH_INT_RX_MASK) |
| inta |= CSR_INT_BIT_FH_RX; |
| if (inta_fh & CSR49_FH_INT_TX_MASK) |
| inta |= CSR_INT_BIT_FH_TX; |
| |
| /* Now service all interrupt bits discovered above. */ |
| if (inta & CSR_INT_BIT_HW_ERR) { |
| IWL_ERR(priv, "Hardware error detected. Restarting.\n"); |
| |
| /* Tell the device to stop sending interrupts */ |
| iwl_legacy_disable_interrupts(priv); |
| |
| priv->isr_stats.hw++; |
| iwl_legacy_irq_handle_error(priv); |
| |
| handled |= CSR_INT_BIT_HW_ERR; |
| |
| return; |
| } |
| |
| #ifdef CONFIG_IWLWIFI_LEGACY_DEBUG |
| if (iwl_legacy_get_debug_level(priv) & (IWL_DL_ISR)) { |
| /* NIC fires this, but we don't use it, redundant with WAKEUP */ |
| if (inta & CSR_INT_BIT_SCD) { |
| IWL_DEBUG_ISR(priv, "Scheduler finished to transmit " |
| "the frame/frames.\n"); |
| priv->isr_stats.sch++; |
| } |
| |
| /* Alive notification via Rx interrupt will do the real work */ |
| if (inta & CSR_INT_BIT_ALIVE) { |
| IWL_DEBUG_ISR(priv, "Alive interrupt\n"); |
| priv->isr_stats.alive++; |
| } |
| } |
| #endif |
| /* Safely ignore these bits for debug checks below */ |
| inta &= ~(CSR_INT_BIT_SCD | CSR_INT_BIT_ALIVE); |
| |
| /* HW RF KILL switch toggled */ |
| if (inta & CSR_INT_BIT_RF_KILL) { |
| int hw_rf_kill = 0; |
| if (!(iwl_read32(priv, CSR_GP_CNTRL) & |
| CSR_GP_CNTRL_REG_FLAG_HW_RF_KILL_SW)) |
| hw_rf_kill = 1; |
| |
| IWL_WARN(priv, "RF_KILL bit toggled to %s.\n", |
| hw_rf_kill ? "disable radio" : "enable radio"); |
| |
| priv->isr_stats.rfkill++; |
| |
| /* driver only loads ucode once setting the interface up. |
| * the driver allows loading the ucode even if the radio |
| * is killed. Hence update the killswitch state here. The |
| * rfkill handler will care about restarting if needed. |
| */ |
| if (!test_bit(STATUS_ALIVE, &priv->status)) { |
| if (hw_rf_kill) |
| set_bit(STATUS_RF_KILL_HW, &priv->status); |
| else |
| clear_bit(STATUS_RF_KILL_HW, &priv->status); |
| wiphy_rfkill_set_hw_state(priv->hw->wiphy, hw_rf_kill); |
| } |
| |
| handled |= CSR_INT_BIT_RF_KILL; |
| } |
| |
| /* Chip got too hot and stopped itself */ |
| if (inta & CSR_INT_BIT_CT_KILL) { |
| IWL_ERR(priv, "Microcode CT kill error detected.\n"); |
| priv->isr_stats.ctkill++; |
| handled |= CSR_INT_BIT_CT_KILL; |
| } |
| |
| /* Error detected by uCode */ |
| if (inta & CSR_INT_BIT_SW_ERR) { |
| IWL_ERR(priv, "Microcode SW error detected. " |
| " Restarting 0x%X.\n", inta); |
| priv->isr_stats.sw++; |
| iwl_legacy_irq_handle_error(priv); |
| handled |= CSR_INT_BIT_SW_ERR; |
| } |
| |
| /* |
| * uCode wakes up after power-down sleep. |
| * Tell device about any new tx or host commands enqueued, |
| * and about any Rx buffers made available while asleep. |
| */ |
| if (inta & CSR_INT_BIT_WAKEUP) { |
| IWL_DEBUG_ISR(priv, "Wakeup interrupt\n"); |
| iwl_legacy_rx_queue_update_write_ptr(priv, &priv->rxq); |
| for (i = 0; i < priv->hw_params.max_txq_num; i++) |
| iwl_legacy_txq_update_write_ptr(priv, &priv->txq[i]); |
| priv->isr_stats.wakeup++; |
| handled |= CSR_INT_BIT_WAKEUP; |
| } |
| |
| /* All uCode command responses, including Tx command responses, |
| * Rx "responses" (frame-received notification), and other |
| * notifications from uCode come through here*/ |
| if (inta & (CSR_INT_BIT_FH_RX | CSR_INT_BIT_SW_RX)) { |
| iwl4965_rx_handle(priv); |
| priv->isr_stats.rx++; |
| handled |= (CSR_INT_BIT_FH_RX | CSR_INT_BIT_SW_RX); |
| } |
| |
| /* This "Tx" DMA channel is used only for loading uCode */ |
| if (inta & CSR_INT_BIT_FH_TX) { |
| IWL_DEBUG_ISR(priv, "uCode load interrupt\n"); |
| priv->isr_stats.tx++; |
| handled |= CSR_INT_BIT_FH_TX; |
| /* Wake up uCode load routine, now that load is complete */ |
| priv->ucode_write_complete = 1; |
| wake_up_interruptible(&priv->wait_command_queue); |
| } |
| |
| if (inta & ~handled) { |
| IWL_ERR(priv, "Unhandled INTA bits 0x%08x\n", inta & ~handled); |
| priv->isr_stats.unhandled++; |
| } |
| |
| if (inta & ~(priv->inta_mask)) { |
| IWL_WARN(priv, "Disabled INTA bits 0x%08x were pending\n", |
| inta & ~priv->inta_mask); |
| IWL_WARN(priv, " with FH_INT = 0x%08x\n", inta_fh); |
| } |
| |
| /* Re-enable all interrupts */ |
| /* only Re-enable if disabled by irq */ |
| if (test_bit(STATUS_INT_ENABLED, &priv->status)) |
| iwl_legacy_enable_interrupts(priv); |
| /* Re-enable RF_KILL if it occurred */ |
| else if (handled & CSR_INT_BIT_RF_KILL) |
| iwl_legacy_enable_rfkill_int(priv); |
| |
| #ifdef CONFIG_IWLWIFI_LEGACY_DEBUG |
| if (iwl_legacy_get_debug_level(priv) & (IWL_DL_ISR)) { |
| inta = iwl_read32(priv, CSR_INT); |
| inta_mask = iwl_read32(priv, CSR_INT_MASK); |
| inta_fh = iwl_read32(priv, CSR_FH_INT_STATUS); |
| IWL_DEBUG_ISR(priv, |
| "End inta 0x%08x, enabled 0x%08x, fh 0x%08x, " |
| "flags 0x%08lx\n", inta, inta_mask, inta_fh, flags); |
| } |
| #endif |
| } |
| |
| /***************************************************************************** |
| * |
| * sysfs attributes |
| * |
| *****************************************************************************/ |
| |
| #ifdef CONFIG_IWLWIFI_LEGACY_DEBUG |
| |
| /* |
| * The following adds a new attribute to the sysfs representation |
| * of this device driver (i.e. a new file in /sys/class/net/wlan0/device/) |
| * used for controlling the debug level. |
| * |
| * See the level definitions in iwl for details. |
| * |
| * The debug_level being managed using sysfs below is a per device debug |
| * level that is used instead of the global debug level if it (the per |
| * device debug level) is set. |
| */ |
| static ssize_t iwl4965_show_debug_level(struct device *d, |
| struct device_attribute *attr, char *buf) |
| { |
| struct iwl_priv *priv = dev_get_drvdata(d); |
| return sprintf(buf, "0x%08X\n", iwl_legacy_get_debug_level(priv)); |
| } |
| static ssize_t iwl4965_store_debug_level(struct device *d, |
| struct device_attribute *attr, |
| const char *buf, size_t count) |
| { |
| struct iwl_priv *priv = dev_get_drvdata(d); |
| unsigned long val; |
| int ret; |
| |
| ret = strict_strtoul(buf, 0, &val); |
| if (ret) |
| IWL_ERR(priv, "%s is not in hex or decimal form.\n", buf); |
| else { |
| priv->debug_level = val; |
| if (iwl_legacy_alloc_traffic_mem(priv)) |
| IWL_ERR(priv, |
| "Not enough memory to generate traffic log\n"); |
| } |
| return strnlen(buf, count); |
| } |
| |
| static DEVICE_ATTR(debug_level, S_IWUSR | S_IRUGO, |
| iwl4965_show_debug_level, iwl4965_store_debug_level); |
| |
| |
| #endif /* CONFIG_IWLWIFI_LEGACY_DEBUG */ |
| |
| |
| static ssize_t iwl4965_show_temperature(struct device *d, |
| struct device_attribute *attr, char *buf) |
| { |
| struct iwl_priv *priv = dev_get_drvdata(d); |
| |
| if (!iwl_legacy_is_alive(priv)) |
| return -EAGAIN; |
| |
| return sprintf(buf, "%d\n", priv->temperature); |
| } |
| |
| static DEVICE_ATTR(temperature, S_IRUGO, iwl4965_show_temperature, NULL); |
| |
| static ssize_t iwl4965_show_tx_power(struct device *d, |
| struct device_attribute *attr, char *buf) |
| { |
| struct iwl_priv *priv = dev_get_drvdata(d); |
| |
| if (!iwl_legacy_is_ready_rf(priv)) |
| return sprintf(buf, "off\n"); |
| else |
| return sprintf(buf, "%d\n", priv->tx_power_user_lmt); |
| } |
| |
| static ssize_t iwl4965_store_tx_power(struct device *d, |
| struct device_attribute *attr, |
| const char *buf, size_t count) |
| { |
| struct iwl_priv *priv = dev_get_drvdata(d); |
| unsigned long val; |
| int ret; |
| |
| ret = strict_strtoul(buf, 10, &val); |
| if (ret) |
| IWL_INFO(priv, "%s is not in decimal form.\n", buf); |
| else { |
| ret = iwl_legacy_set_tx_power(priv, val, false); |
| if (ret) |
| IWL_ERR(priv, "failed setting tx power (0x%d).\n", |
| ret); |
| else |
| ret = count; |
| } |
| return ret; |
| } |
| |
| static DEVICE_ATTR(tx_power, S_IWUSR | S_IRUGO, |
| iwl4965_show_tx_power, iwl4965_store_tx_power); |
| |
| static struct attribute *iwl_sysfs_entries[] = { |
| &dev_attr_temperature.attr, |
| &dev_attr_tx_power.attr, |
| #ifdef CONFIG_IWLWIFI_LEGACY_DEBUG |
| &dev_attr_debug_level.attr, |
| #endif |
| NULL |
| }; |
| |
| static struct attribute_group iwl_attribute_group = { |
| .name = NULL, /* put in device directory */ |
| .attrs = iwl_sysfs_entries, |
| }; |
| |
| /****************************************************************************** |
| * |
| * uCode download functions |
| * |
| ******************************************************************************/ |
| |
| static void iwl4965_dealloc_ucode_pci(struct iwl_priv *priv) |
| { |
| iwl_legacy_free_fw_desc(priv->pci_dev, &priv->ucode_code); |
| iwl_legacy_free_fw_desc(priv->pci_dev, &priv->ucode_data); |
| iwl_legacy_free_fw_desc(priv->pci_dev, &priv->ucode_data_backup); |
| iwl_legacy_free_fw_desc(priv->pci_dev, &priv->ucode_init); |
| iwl_legacy_free_fw_desc(priv->pci_dev, &priv->ucode_init_data); |
| iwl_legacy_free_fw_desc(priv->pci_dev, &priv->ucode_boot); |
| } |
| |
| static void iwl4965_nic_start(struct iwl_priv *priv) |
| { |
| /* Remove all resets to allow NIC to operate */ |
| iwl_write32(priv, CSR_RESET, 0); |
| } |
| |
| static void iwl4965_ucode_callback(const struct firmware *ucode_raw, |
| void *context); |
| static int iwl4965_mac_setup_register(struct iwl_priv *priv, |
| u32 max_probe_length); |
| |
| static int __must_check iwl4965_request_firmware(struct iwl_priv *priv, bool first) |
| { |
| const char *name_pre = priv->cfg->fw_name_pre; |
| char tag[8]; |
| |
| if (first) { |
| priv->fw_index = priv->cfg->ucode_api_max; |
| sprintf(tag, "%d", priv->fw_index); |
| } else { |
| priv->fw_index--; |
| sprintf(tag, "%d", priv->fw_index); |
| } |
| |
| if (priv->fw_index < priv->cfg->ucode_api_min) { |
| IWL_ERR(priv, "no suitable firmware found!\n"); |
| return -ENOENT; |
| } |
| |
| sprintf(priv->firmware_name, "%s%s%s", name_pre, tag, ".ucode"); |
| |
| IWL_DEBUG_INFO(priv, "attempting to load firmware '%s'\n", |
| priv->firmware_name); |
| |
| return request_firmware_nowait(THIS_MODULE, 1, priv->firmware_name, |
| &priv->pci_dev->dev, GFP_KERNEL, priv, |
| iwl4965_ucode_callback); |
| } |
| |
| struct iwl4965_firmware_pieces { |
| const void *inst, *data, *init, *init_data, *boot; |
| size_t inst_size, data_size, init_size, init_data_size, boot_size; |
| }; |
| |
| static int iwl4965_load_firmware(struct iwl_priv *priv, |
| const struct firmware *ucode_raw, |
| struct iwl4965_firmware_pieces *pieces) |
| { |
| struct iwl_ucode_header *ucode = (void *)ucode_raw->data; |
| u32 api_ver, hdr_size; |
| const u8 *src; |
| |
| priv->ucode_ver = le32_to_cpu(ucode->ver); |
| api_ver = IWL_UCODE_API(priv->ucode_ver); |
| |
| switch (api_ver) { |
| default: |
| case 0: |
| case 1: |
| case 2: |
| hdr_size = 24; |
| if (ucode_raw->size < hdr_size) { |
| IWL_ERR(priv, "File size too small!\n"); |
| return -EINVAL; |
| } |
| pieces->inst_size = le32_to_cpu(ucode->v1.inst_size); |
| pieces->data_size = le32_to_cpu(ucode->v1.data_size); |
| pieces->init_size = le32_to_cpu(ucode->v1.init_size); |
| pieces->init_data_size = |
| le32_to_cpu(ucode->v1.init_data_size); |
| pieces->boot_size = le32_to_cpu(ucode->v1.boot_size); |
| src = ucode->v1.data; |
| break; |
| } |
| |
| /* Verify size of file vs. image size info in file's header */ |
| if (ucode_raw->size != hdr_size + pieces->inst_size + |
| pieces->data_size + pieces->init_size + |
| pieces->init_data_size + pieces->boot_size) { |
| |
| IWL_ERR(priv, |
| "uCode file size %d does not match expected size\n", |
| (int)ucode_raw->size); |
| return -EINVAL; |
| } |
| |
| pieces->inst = src; |
| src += pieces->inst_size; |
| pieces->data = src; |
| src += pieces->data_size; |
| pieces->init = src; |
| src += pieces->init_size; |
| pieces->init_data = src; |
| src += pieces->init_data_size; |
| pieces->boot = src; |
| src += pieces->boot_size; |
| |
| return 0; |
| } |
| |
| /** |
| * iwl4965_ucode_callback - callback when firmware was loaded |
| * |
| * If loaded successfully, copies the firmware into buffers |
| * for the card to fetch (via DMA). |
| */ |
| static void |
| iwl4965_ucode_callback(const struct firmware *ucode_raw, void *context) |
| { |
| struct iwl_priv *priv = context; |
| struct iwl_ucode_header *ucode; |
| int err; |
| struct iwl4965_firmware_pieces pieces; |
| const unsigned int api_max = priv->cfg->ucode_api_max; |
| const unsigned int api_min = priv->cfg->ucode_api_min; |
| u32 api_ver; |
| |
| u32 max_probe_length = 200; |
| u32 standard_phy_calibration_size = |
| IWL_DEFAULT_STANDARD_PHY_CALIBRATE_TBL_SIZE; |
| |
| memset(&pieces, 0, sizeof(pieces)); |
| |
| if (!ucode_raw) { |
| if (priv->fw_index <= priv->cfg->ucode_api_max) |
| IWL_ERR(priv, |
| "request for firmware file '%s' failed.\n", |
| priv->firmware_name); |
| goto try_again; |
| } |
| |
| IWL_DEBUG_INFO(priv, "Loaded firmware file '%s' (%zd bytes).\n", |
| priv->firmware_name, ucode_raw->size); |
| |
| /* Make sure that we got at least the API version number */ |
| if (ucode_raw->size < 4) { |
| IWL_ERR(priv, "File size way too small!\n"); |
| goto try_again; |
| } |
| |
| /* Data from ucode file: header followed by uCode images */ |
| ucode = (struct iwl_ucode_header *)ucode_raw->data; |
| |
| err = iwl4965_load_firmware(priv, ucode_raw, &pieces); |
| |
| if (err) |
| goto try_again; |
| |
| api_ver = IWL_UCODE_API(priv->ucode_ver); |
| |
| /* |
| * api_ver should match the api version forming part of the |
| * firmware filename ... but we don't check for that and only rely |
| * on the API version read from firmware header from here on forward |
| */ |
| if (api_ver < api_min || api_ver > api_max) { |
| IWL_ERR(priv, |
| "Driver unable to support your firmware API. " |
| "Driver supports v%u, firmware is v%u.\n", |
| api_max, api_ver); |
| goto try_again; |
| } |
| |
| if (api_ver != api_max) |
| IWL_ERR(priv, |
| "Firmware has old API version. Expected v%u, " |
| "got v%u. New firmware can be obtained " |
| "from http://www.intellinuxwireless.org.\n", |
| api_max, api_ver); |
| |
| IWL_INFO(priv, "loaded firmware version %u.%u.%u.%u\n", |
| IWL_UCODE_MAJOR(priv->ucode_ver), |
| IWL_UCODE_MINOR(priv->ucode_ver), |
| IWL_UCODE_API(priv->ucode_ver), |
| IWL_UCODE_SERIAL(priv->ucode_ver)); |
| |
| snprintf(priv->hw->wiphy->fw_version, |
| sizeof(priv->hw->wiphy->fw_version), |
| "%u.%u.%u.%u", |
| IWL_UCODE_MAJOR(priv->ucode_ver), |
| IWL_UCODE_MINOR(priv->ucode_ver), |
| IWL_UCODE_API(priv->ucode_ver), |
| IWL_UCODE_SERIAL(priv->ucode_ver)); |
| |
| /* |
| * For any of the failures below (before allocating pci memory) |
| * we will try to load a version with a smaller API -- maybe the |
| * user just got a corrupted version of the latest API. |
| */ |
| |
| IWL_DEBUG_INFO(priv, "f/w package hdr ucode version raw = 0x%x\n", |
| priv->ucode_ver); |
| IWL_DEBUG_INFO(priv, "f/w package hdr runtime inst size = %Zd\n", |
| pieces.inst_size); |
| IWL_DEBUG_INFO(priv, "f/w package hdr runtime data size = %Zd\n", |
| pieces.data_size); |
| IWL_DEBUG_INFO(priv, "f/w package hdr init inst size = %Zd\n", |
| pieces.init_size); |
| IWL_DEBUG_INFO(priv, "f/w package hdr init data size = %Zd\n", |
| pieces.init_data_size); |
| IWL_DEBUG_INFO(priv, "f/w package hdr boot inst size = %Zd\n", |
| pieces.boot_size); |
| |
| /* Verify that uCode images will fit in card's SRAM */ |
| if (pieces.inst_size > priv->hw_params.max_inst_size) { |
| IWL_ERR(priv, "uCode instr len %Zd too large to fit in\n", |
| pieces.inst_size); |
| goto try_again; |
| } |
| |
| if (pieces.data_size > priv->hw_params.max_data_size) { |
| IWL_ERR(priv, "uCode data len %Zd too large to fit in\n", |
| pieces.data_size); |
| goto try_again; |
| } |
| |
| if (pieces.init_size > priv->hw_params.max_inst_size) { |
| IWL_ERR(priv, "uCode init instr len %Zd too large to fit in\n", |
| pieces.init_size); |
| goto try_again; |
| } |
| |
| if (pieces.init_data_size > priv->hw_params.max_data_size) { |
| IWL_ERR(priv, "uCode init data len %Zd too large to fit in\n", |
| pieces.init_data_size); |
| goto try_again; |
| } |
| |
| if (pieces.boot_size > priv->hw_params.max_bsm_size) { |
| IWL_ERR(priv, "uCode boot instr len %Zd too large to fit in\n", |
| pieces.boot_size); |
| goto try_again; |
| } |
| |
| /* Allocate ucode buffers for card's bus-master loading ... */ |
| |
| /* Runtime instructions and 2 copies of data: |
| * 1) unmodified from disk |
| * 2) backup cache for save/restore during power-downs */ |
| priv->ucode_code.len = pieces.inst_size; |
| iwl_legacy_alloc_fw_desc(priv->pci_dev, &priv->ucode_code); |
| |
| priv->ucode_data.len = pieces.data_size; |
| iwl_legacy_alloc_fw_desc(priv->pci_dev, &priv->ucode_data); |
| |
| priv->ucode_data_backup.len = pieces.data_size; |
| iwl_legacy_alloc_fw_desc(priv->pci_dev, &priv->ucode_data_backup); |
| |
| if (!priv->ucode_code.v_addr || !priv->ucode_data.v_addr || |
| !priv->ucode_data_backup.v_addr) |
| goto err_pci_alloc; |
| |
| /* Initialization instructions and data */ |
| if (pieces.init_size && pieces.init_data_size) { |
| priv->ucode_init.len = pieces.init_size; |
| iwl_legacy_alloc_fw_desc(priv->pci_dev, &priv->ucode_init); |
| |
| priv->ucode_init_data.len = pieces.init_data_size; |
| iwl_legacy_alloc_fw_desc(priv->pci_dev, &priv->ucode_init_data); |
| |
| if (!priv->ucode_init.v_addr || !priv->ucode_init_data.v_addr) |
| goto err_pci_alloc; |
| } |
| |
| /* Bootstrap (instructions only, no data) */ |
| if (pieces.boot_size) { |
| priv->ucode_boot.len = pieces.boot_size; |
| iwl_legacy_alloc_fw_desc(priv->pci_dev, &priv->ucode_boot); |
| |
| if (!priv->ucode_boot.v_addr) |
| goto err_pci_alloc; |
| } |
| |
| /* Now that we can no longer fail, copy information */ |
| |
| priv->sta_key_max_num = STA_KEY_MAX_NUM; |
| |
| /* Copy images into buffers for card's bus-master reads ... */ |
| |
| /* Runtime instructions (first block of data in file) */ |
| IWL_DEBUG_INFO(priv, "Copying (but not loading) uCode instr len %Zd\n", |
| pieces.inst_size); |
| memcpy(priv->ucode_code.v_addr, pieces.inst, pieces.inst_size); |
| |
| IWL_DEBUG_INFO(priv, "uCode instr buf vaddr = 0x%p, paddr = 0x%08x\n", |
| priv->ucode_code.v_addr, (u32)priv->ucode_code.p_addr); |
| |
| /* |
| * Runtime data |
| * NOTE: Copy into backup buffer will be done in iwl_up() |
| */ |
| IWL_DEBUG_INFO(priv, "Copying (but not loading) uCode data len %Zd\n", |
| pieces.data_size); |
| memcpy(priv->ucode_data.v_addr, pieces.data, pieces.data_size); |
| memcpy(priv->ucode_data_backup.v_addr, pieces.data, pieces.data_size); |
| |
| /* Initialization instructions */ |
| if (pieces.init_size) { |
| IWL_DEBUG_INFO(priv, |
| "Copying (but not loading) init instr len %Zd\n", |
| pieces.init_size); |
| memcpy(priv->ucode_init.v_addr, pieces.init, pieces.init_size); |
| } |
| |
| /* Initialization data */ |
| if (pieces.init_data_size) { |
| IWL_DEBUG_INFO(priv, |
| "Copying (but not loading) init data len %Zd\n", |
| pieces.init_data_size); |
| memcpy(priv->ucode_init_data.v_addr, pieces.init_data, |
| pieces.init_data_size); |
| } |
| |
| /* Bootstrap instructions */ |
| IWL_DEBUG_INFO(priv, "Copying (but not loading) boot instr len %Zd\n", |
| pieces.boot_size); |
| memcpy(priv->ucode_boot.v_addr, pieces.boot, pieces.boot_size); |
| |
| /* |
| * figure out the offset of chain noise reset and gain commands |
| * base on the size of standard phy calibration commands table size |
| */ |
| priv->_4965.phy_calib_chain_noise_reset_cmd = |
| standard_phy_calibration_size; |
| priv->_4965.phy_calib_chain_noise_gain_cmd = |
| standard_phy_calibration_size + 1; |
| |
| /************************************************** |
| * This is still part of probe() in a sense... |
| * |
| * 9. Setup and register with mac80211 and debugfs |
| **************************************************/ |
| err = iwl4965_mac_setup_register(priv, max_probe_length); |
| if (err) |
| goto out_unbind; |
| |
| err = iwl_legacy_dbgfs_register(priv, DRV_NAME); |
| if (err) |
| IWL_ERR(priv, |
| "failed to create debugfs files. Ignoring error: %d\n", err); |
| |
| err = sysfs_create_group(&priv->pci_dev->dev.kobj, |
| &iwl_attribute_group); |
| if (err) { |
| IWL_ERR(priv, "failed to create sysfs device attributes\n"); |
| goto out_unbind; |
| } |
| |
| /* We have our copies now, allow OS release its copies */ |
| release_firmware(ucode_raw); |
| complete(&priv->_4965.firmware_loading_complete); |
| return; |
| |
| try_again: |
| /* try next, if any */ |
| if (iwl4965_request_firmware(priv, false)) |
| goto out_unbind; |
| release_firmware(ucode_raw); |
| return; |
| |
| err_pci_alloc: |
| IWL_ERR(priv, "failed to allocate pci memory\n"); |
| iwl4965_dealloc_ucode_pci(priv); |
| out_unbind: |
| complete(&priv->_4965.firmware_loading_complete); |
| device_release_driver(&priv->pci_dev->dev); |
| release_firmware(ucode_raw); |
| } |
| |
| static const char * const desc_lookup_text[] = { |
| "OK", |
| "FAIL", |
| "BAD_PARAM", |
| "BAD_CHECKSUM", |
| "NMI_INTERRUPT_WDG", |
| "SYSASSERT", |
| "FATAL_ERROR", |
| "BAD_COMMAND", |
| "HW_ERROR_TUNE_LOCK", |
| "HW_ERROR_TEMPERATURE", |
| "ILLEGAL_CHAN_FREQ", |
| "VCC_NOT_STABLE", |
| "FH_ERROR", |
| "NMI_INTERRUPT_HOST", |
| "NMI_INTERRUPT_ACTION_PT", |
| "NMI_INTERRUPT_UNKNOWN", |
| "UCODE_VERSION_MISMATCH", |
| "HW_ERROR_ABS_LOCK", |
| "HW_ERROR_CAL_LOCK_FAIL", |
| "NMI_INTERRUPT_INST_ACTION_PT", |
| "NMI_INTERRUPT_DATA_ACTION_PT", |
| "NMI_TRM_HW_ER", |
| "NMI_INTERRUPT_TRM", |
| "NMI_INTERRUPT_BREAK_POINT" |
| "DEBUG_0", |
| "DEBUG_1", |
| "DEBUG_2", |
| "DEBUG_3", |
| }; |
| |
| static struct { char *name; u8 num; } advanced_lookup[] = { |
| { "NMI_INTERRUPT_WDG", 0x34 }, |
| { "SYSASSERT", 0x35 }, |
| { "UCODE_VERSION_MISMATCH", 0x37 }, |
| { "BAD_COMMAND", 0x38 }, |
| { "NMI_INTERRUPT_DATA_ACTION_PT", 0x3C }, |
| { "FATAL_ERROR", 0x3D }, |
| { "NMI_TRM_HW_ERR", 0x46 }, |
| { "NMI_INTERRUPT_TRM", 0x4C }, |
| { "NMI_INTERRUPT_BREAK_POINT", 0x54 }, |
| { "NMI_INTERRUPT_WDG_RXF_FULL", 0x5C }, |
| { "NMI_INTERRUPT_WDG_NO_RBD_RXF_FULL", 0x64 }, |
| { "NMI_INTERRUPT_HOST", 0x66 }, |
| { "NMI_INTERRUPT_ACTION_PT", 0x7C }, |
| { "NMI_INTERRUPT_UNKNOWN", 0x84 }, |
| { "NMI_INTERRUPT_INST_ACTION_PT", 0x86 }, |
| { "ADVANCED_SYSASSERT", 0 }, |
| }; |
| |
| static const char *iwl4965_desc_lookup(u32 num) |
| { |
| int i; |
| int max = ARRAY_SIZE(desc_lookup_text); |
| |
| if (num < max) |
| return desc_lookup_text[num]; |
| |
| max = ARRAY_SIZE(advanced_lookup) - 1; |
| for (i = 0; i < max; i++) { |
| if (advanced_lookup[i].num == num) |
| break; |
| } |
| return advanced_lookup[i].name; |
| } |
| |
| #define ERROR_START_OFFSET (1 * sizeof(u32)) |
| #define ERROR_ELEM_SIZE (7 * sizeof(u32)) |
| |
| void iwl4965_dump_nic_error_log(struct iwl_priv *priv) |
| { |
| u32 data2, line; |
| u32 desc, time, count, base, data1; |
| u32 blink1, blink2, ilink1, ilink2; |
| u32 pc, hcmd; |
| |
| if (priv->ucode_type == UCODE_INIT) { |
| base = le32_to_cpu(priv->card_alive_init.error_event_table_ptr); |
| } else { |
| base = le32_to_cpu(priv->card_alive.error_event_table_ptr); |
| } |
| |
| if (!priv->cfg->ops->lib->is_valid_rtc_data_addr(base)) { |
| IWL_ERR(priv, |
| "Not valid error log pointer 0x%08X for %s uCode\n", |
| base, (priv->ucode_type == UCODE_INIT) ? "Init" : "RT"); |
| return; |
| } |
| |
| count = iwl_legacy_read_targ_mem(priv, base); |
| |
| if (ERROR_START_OFFSET <= count * ERROR_ELEM_SIZE) { |
| IWL_ERR(priv, "Start IWL Error Log Dump:\n"); |
| IWL_ERR(priv, "Status: 0x%08lX, count: %d\n", |
| priv->status, count); |
| } |
| |
| desc = iwl_legacy_read_targ_mem(priv, base + 1 * sizeof(u32)); |
| priv->isr_stats.err_code = desc; |
| pc = iwl_legacy_read_targ_mem(priv, base + 2 * sizeof(u32)); |
| blink1 = iwl_legacy_read_targ_mem(priv, base + 3 * sizeof(u32)); |
| blink2 = iwl_legacy_read_targ_mem(priv, base + 4 * sizeof(u32)); |
| ilink1 = iwl_legacy_read_targ_mem(priv, base + 5 * sizeof(u32)); |
| ilink2 = iwl_legacy_read_targ_mem(priv, base + 6 * sizeof(u32)); |
| data1 = iwl_legacy_read_targ_mem(priv, base + 7 * sizeof(u32)); |
| data2 = iwl_legacy_read_targ_mem(priv, base + 8 * sizeof(u32)); |
| line = iwl_legacy_read_targ_mem(priv, base + 9 * sizeof(u32)); |
| time = iwl_legacy_read_targ_mem(priv, base + 11 * sizeof(u32)); |
| hcmd = iwl_legacy_read_targ_mem(priv, base + 22 * sizeof(u32)); |
| |
| trace_iwlwifi_legacy_dev_ucode_error(priv, desc, |
| time, data1, data2, line, |
| blink1, blink2, ilink1, ilink2); |
| |
| IWL_ERR(priv, "Desc Time " |
| "data1 data2 line\n"); |
| IWL_ERR(priv, "%-28s (0x%04X) %010u 0x%08X 0x%08X %u\n", |
| iwl4965_desc_lookup(desc), desc, time, data1, data2, line); |
| IWL_ERR(priv, "pc blink1 blink2 ilink1 ilink2 hcmd\n"); |
| IWL_ERR(priv, "0x%05X 0x%05X 0x%05X 0x%05X 0x%05X 0x%05X\n", |
| pc, blink1, blink2, ilink1, ilink2, hcmd); |
| } |
| |
| #define EVENT_START_OFFSET (4 * sizeof(u32)) |
| |
| /** |
| * iwl4965_print_event_log - Dump error event log to syslog |
| * |
| */ |
| static int iwl4965_print_event_log(struct iwl_priv *priv, u32 start_idx, |
| u32 num_events, u32 mode, |
| int pos, char **buf, size_t bufsz) |
| { |
| u32 i; |
| u32 base; /* SRAM byte address of event log header */ |
| u32 event_size; /* 2 u32s, or 3 u32s if timestamp recorded */ |
| u32 ptr; /* SRAM byte address of log data */ |
| u32 ev, time, data; /* event log data */ |
| unsigned long reg_flags; |
| |
| if (num_events == 0) |
| return pos; |
| |
| if (priv->ucode_type == UCODE_INIT) { |
| base = le32_to_cpu(priv->card_alive_init.log_event_table_ptr); |
| } else { |
| base = le32_to_cpu(priv->card_alive.log_event_table_ptr); |
| } |
| |
| if (mode == 0) |
| event_size = 2 * sizeof(u32); |
| else |
| event_size = 3 * sizeof(u32); |
| |
| ptr = base + EVENT_START_OFFSET + (start_idx * event_size); |
| |
| /* Make sure device is powered up for SRAM reads */ |
| spin_lock_irqsave(&priv->reg_lock, reg_flags); |
| iwl_grab_nic_access(priv); |
| |
| /* Set starting address; reads will auto-increment */ |
| _iwl_legacy_write_direct32(priv, HBUS_TARG_MEM_RADDR, ptr); |
| rmb(); |
| |
| /* "time" is actually "data" for mode 0 (no timestamp). |
| * place event id # at far right for easier visual parsing. */ |
| for (i = 0; i < num_events; i++) { |
| ev = _iwl_legacy_read_direct32(priv, HBUS_TARG_MEM_RDAT); |
| time = _iwl_legacy_read_direct32(priv, HBUS_TARG_MEM_RDAT); |
| if (mode == 0) { |
| /* data, ev */ |
| if (bufsz) { |
| pos += scnprintf(*buf + pos, bufsz - pos, |
| "EVT_LOG:0x%08x:%04u\n", |
| time, ev); |
| } else { |
| trace_iwlwifi_legacy_dev_ucode_event(priv, 0, |
| time, ev); |
| IWL_ERR(priv, "EVT_LOG:0x%08x:%04u\n", |
| time, ev); |
| } |
| } else { |
| data = _iwl_legacy_read_direct32(priv, |
| HBUS_TARG_MEM_RDAT); |
| if (bufsz) { |
| pos += scnprintf(*buf + pos, bufsz - pos, |
| "EVT_LOGT:%010u:0x%08x:%04u\n", |
| time, data, ev); |
| } else { |
| IWL_ERR(priv, "EVT_LOGT:%010u:0x%08x:%04u\n", |
| time, data, ev); |
| trace_iwlwifi_legacy_dev_ucode_event(priv, time, |
| data, ev); |
| } |
| } |
| } |
| |
| /* Allow device to power down */ |
| iwl_release_nic_access(priv); |
| spin_unlock_irqrestore(&priv->reg_lock, reg_flags); |
| return pos; |
| } |
| |
| /** |
| * iwl4965_print_last_event_logs - Dump the newest # of event log to syslog |
| */ |
| static int iwl4965_print_last_event_logs(struct iwl_priv *priv, u32 capacity, |
| u32 num_wraps, u32 next_entry, |
| u32 size, u32 mode, |
| int pos, char **buf, size_t bufsz) |
| { |
| /* |
| * display the newest DEFAULT_LOG_ENTRIES entries |
| * i.e the entries just before the next ont that uCode would fill. |
| */ |
| if (num_wraps) { |
| if (next_entry < size) { |
| pos = iwl4965_print_event_log(priv, |
| capacity - (size - next_entry), |
| size - next_entry, mode, |
| pos, buf, bufsz); |
| pos = iwl4965_print_event_log(priv, 0, |
| next_entry, mode, |
| pos, buf, bufsz); |
| } else |
| pos = iwl4965_print_event_log(priv, next_entry - size, |
| size, mode, pos, buf, bufsz); |
| } else { |
| if (next_entry < size) { |
| pos = iwl4965_print_event_log(priv, 0, next_entry, |
| mode, pos, buf, bufsz); |
| } else { |
| pos = iwl4965_print_event_log(priv, next_entry - size, |
| size, mode, pos, buf, bufsz); |
| } |
| } |
| return pos; |
| } |
| |
| #define DEFAULT_DUMP_EVENT_LOG_ENTRIES (20) |
| |
| int iwl4965_dump_nic_event_log(struct iwl_priv *priv, bool full_log, |
| char **buf, bool display) |
| { |
| u32 base; /* SRAM byte address of event log header */ |
| u32 capacity; /* event log capacity in # entries */ |
| u32 mode; /* 0 - no timestamp, 1 - timestamp recorded */ |
| u32 num_wraps; /* # times uCode wrapped to top of log */ |
| u32 next_entry; /* index of next entry to be written by uCode */ |
| u32 size; /* # entries that we'll print */ |
| int pos = 0; |
| size_t bufsz = 0; |
| |
| if (priv->ucode_type == UCODE_INIT) { |
| base = le32_to_cpu(priv->card_alive_init.log_event_table_ptr); |
| } else { |
| base = le32_to_cpu(priv->card_alive.log_event_table_ptr); |
| } |
| |
| if (!priv->cfg->ops->lib->is_valid_rtc_data_addr(base)) { |
| IWL_ERR(priv, |
| "Invalid event log pointer 0x%08X for %s uCode\n", |
| base, (priv->ucode_type == UCODE_INIT) ? "Init" : "RT"); |
| return -EINVAL; |
| } |
| |
| /* event log header */ |
| capacity = iwl_legacy_read_targ_mem(priv, base); |
| mode = iwl_legacy_read_targ_mem(priv, base + (1 * sizeof(u32))); |
| num_wraps = iwl_legacy_read_targ_mem(priv, base + (2 * sizeof(u32))); |
| next_entry = iwl_legacy_read_targ_mem(priv, base + (3 * sizeof(u32))); |
| |
| size = num_wraps ? capacity : next_entry; |
| |
| /* bail out if nothing in log */ |
| if (size == 0) { |
| IWL_ERR(priv, "Start IWL Event Log Dump: nothing in log\n"); |
| return pos; |
| } |
| |
| #ifdef CONFIG_IWLWIFI_LEGACY_DEBUG |
| if (!(iwl_legacy_get_debug_level(priv) & IWL_DL_FW_ERRORS) && !full_log) |
| size = (size > DEFAULT_DUMP_EVENT_LOG_ENTRIES) |
| ? DEFAULT_DUMP_EVENT_LOG_ENTRIES : size; |
| #else |
| size = (size > DEFAULT_DUMP_EVENT_LOG_ENTRIES) |
| ? DEFAULT_DUMP_EVENT_LOG_ENTRIES : size; |
| #endif |
| IWL_ERR(priv, "Start IWL Event Log Dump: display last %u entries\n", |
| size); |
| |
| #ifdef CONFIG_IWLWIFI_LEGACY_DEBUG |
| if (display) { |
| if (full_log) |
| bufsz = capacity * 48; |
| else |
| bufsz = size * 48; |
| *buf = kmalloc(bufsz, GFP_KERNEL); |
| if (!*buf) |
| return -ENOMEM; |
| } |
| if ((iwl_legacy_get_debug_level(priv) & IWL_DL_FW_ERRORS) || full_log) { |
| /* |
| * if uCode has wrapped back to top of log, |
| * start at the oldest entry, |
| * i.e the next one that uCode would fill. |
| */ |
| if (num_wraps) |
| pos = iwl4965_print_event_log(priv, next_entry, |
| capacity - next_entry, mode, |
| pos, buf, bufsz); |
| /* (then/else) start at top of log */ |
| pos = iwl4965_print_event_log(priv, 0, |
| next_entry, mode, pos, buf, bufsz); |
| } else |
| pos = iwl4965_print_last_event_logs(priv, capacity, num_wraps, |
| next_entry, size, mode, |
| pos, buf, bufsz); |
| #else |
| pos = iwl4965_print_last_event_logs(priv, capacity, num_wraps, |
| next_entry, size, mode, |
| pos, buf, bufsz); |
| #endif |
| return pos; |
| } |
| |
| static void iwl4965_rf_kill_ct_config(struct iwl_priv *priv) |
| { |
| struct iwl_ct_kill_config cmd; |
| unsigned long flags; |
| int ret = 0; |
| |
| spin_lock_irqsave(&priv->lock, flags); |
| iwl_write32(priv, CSR_UCODE_DRV_GP1_CLR, |
| CSR_UCODE_DRV_GP1_REG_BIT_CT_KILL_EXIT); |
| spin_unlock_irqrestore(&priv->lock, flags); |
| |
| cmd.critical_temperature_R = |
| cpu_to_le32(priv->hw_params.ct_kill_threshold); |
| |
| ret = iwl_legacy_send_cmd_pdu(priv, REPLY_CT_KILL_CONFIG_CMD, |
| sizeof(cmd), &cmd); |
| if (ret) |
| IWL_ERR(priv, "REPLY_CT_KILL_CONFIG_CMD failed\n"); |
| else |
| IWL_DEBUG_INFO(priv, "REPLY_CT_KILL_CONFIG_CMD " |
| "succeeded, " |
| "critical temperature is %d\n", |
| priv->hw_params.ct_kill_threshold); |
| } |
| |
| static const s8 default_queue_to_tx_fifo[] = { |
| IWL_TX_FIFO_VO, |
| IWL_TX_FIFO_VI, |
| IWL_TX_FIFO_BE, |
| IWL_TX_FIFO_BK, |
| IWL49_CMD_FIFO_NUM, |
| IWL_TX_FIFO_UNUSED, |
| IWL_TX_FIFO_UNUSED, |
| }; |
| |
| static int iwl4965_alive_notify(struct iwl_priv *priv) |
| { |
| u32 a; |
| unsigned long flags; |
| int i, chan; |
| u32 reg_val; |
| |
| spin_lock_irqsave(&priv->lock, flags); |
| |
| /* Clear 4965's internal Tx Scheduler data base */ |
| priv->scd_base_addr = iwl_legacy_read_prph(priv, |
| IWL49_SCD_SRAM_BASE_ADDR); |
| a = priv->scd_base_addr + IWL49_SCD_CONTEXT_DATA_OFFSET; |
| for (; a < priv->scd_base_addr + IWL49_SCD_TX_STTS_BITMAP_OFFSET; a += 4) |
| iwl_legacy_write_targ_mem(priv, a, 0); |
| for (; a < priv->scd_base_addr + IWL49_SCD_TRANSLATE_TBL_OFFSET; a += 4) |
| iwl_legacy_write_targ_mem(priv, a, 0); |
| for (; a < priv->scd_base_addr + |
| IWL49_SCD_TRANSLATE_TBL_OFFSET_QUEUE(priv->hw_params.max_txq_num); a += 4) |
| iwl_legacy_write_targ_mem(priv, a, 0); |
| |
| /* Tel 4965 where to find Tx byte count tables */ |
| iwl_legacy_write_prph(priv, IWL49_SCD_DRAM_BASE_ADDR, |
| priv->scd_bc_tbls.dma >> 10); |
| |
| /* Enable DMA channel */ |
| for (chan = 0; chan < FH49_TCSR_CHNL_NUM ; chan++) |
| iwl_legacy_write_direct32(priv, |
| FH_TCSR_CHNL_TX_CONFIG_REG(chan), |
| FH_TCSR_TX_CONFIG_REG_VAL_DMA_CHNL_ENABLE | |
| FH_TCSR_TX_CONFIG_REG_VAL_DMA_CREDIT_ENABLE); |
| |
| /* Update FH chicken bits */ |
| reg_val = iwl_legacy_read_direct32(priv, FH_TX_CHICKEN_BITS_REG); |
| iwl_legacy_write_direct32(priv, FH_TX_CHICKEN_BITS_REG, |
| reg_val | FH_TX_CHICKEN_BITS_SCD_AUTO_RETRY_EN); |
| |
| /* Disable chain mode for all queues */ |
| iwl_legacy_write_prph(priv, IWL49_SCD_QUEUECHAIN_SEL, 0); |
| |
| /* Initialize each Tx queue (including the command queue) */ |
| for (i = 0; i < priv->hw_params.max_txq_num; i++) { |
| |
| /* TFD circular buffer read/write indexes */ |
| iwl_legacy_write_prph(priv, IWL49_SCD_QUEUE_RDPTR(i), 0); |
| iwl_legacy_write_direct32(priv, HBUS_TARG_WRPTR, 0 | (i << 8)); |
| |
| /* Max Tx Window size for Scheduler-ACK mode */ |
| iwl_legacy_write_targ_mem(priv, priv->scd_base_addr + |
| IWL49_SCD_CONTEXT_QUEUE_OFFSET(i), |
| (SCD_WIN_SIZE << |
| IWL49_SCD_QUEUE_CTX_REG1_WIN_SIZE_POS) & |
| IWL49_SCD_QUEUE_CTX_REG1_WIN_SIZE_MSK); |
| |
| /* Frame limit */ |
| iwl_legacy_write_targ_mem(priv, priv->scd_base_addr + |
| IWL49_SCD_CONTEXT_QUEUE_OFFSET(i) + |
| sizeof(u32), |
| (SCD_FRAME_LIMIT << |
| IWL49_SCD_QUEUE_CTX_REG2_FRAME_LIMIT_POS) & |
| IWL49_SCD_QUEUE_CTX_REG2_FRAME_LIMIT_MSK); |
| |
| } |
| iwl_legacy_write_prph(priv, IWL49_SCD_INTERRUPT_MASK, |
| (1 << priv->hw_params.max_txq_num) - 1); |
| |
| /* Activate all Tx DMA/FIFO channels */ |
| iwl4965_txq_set_sched(priv, IWL_MASK(0, 6)); |
| |
| iwl4965_set_wr_ptrs(priv, IWL_DEFAULT_CMD_QUEUE_NUM, 0); |
| |
| /* make sure all queue are not stopped */ |
| memset(&priv->queue_stopped[0], 0, sizeof(priv->queue_stopped)); |
| for (i = 0; i < 4; i++) |
| atomic_set(&priv->queue_stop_count[i], 0); |
| |
| /* reset to 0 to enable all the queue first */ |
| priv->txq_ctx_active_msk = 0; |
| /* Map each Tx/cmd queue to its corresponding fifo */ |
| BUILD_BUG_ON(ARRAY_SIZE(default_queue_to_tx_fifo) != 7); |
| |
| for (i = 0; i < ARRAY_SIZE(default_queue_to_tx_fifo); i++) { |
| int ac = default_queue_to_tx_fifo[i]; |
| |
| iwl_txq_ctx_activate(priv, i); |
| |
| if (ac == IWL_TX_FIFO_UNUSED) |
| continue; |
| |
| iwl4965_tx_queue_set_status(priv, &priv->txq[i], ac, 0); |
| } |
| |
| spin_unlock_irqrestore(&priv->lock, flags); |
| |
| return 0; |
| } |
| |
| /** |
| * iwl4965_alive_start - called after REPLY_ALIVE notification received |
| * from protocol/runtime uCode (initialization uCode's |
| * Alive gets handled by iwl_init_alive_start()). |
| */ |
| static void iwl4965_alive_start(struct iwl_priv *priv) |
| { |
| int ret = 0; |
| struct iwl_rxon_context *ctx = &priv->contexts[IWL_RXON_CTX_BSS]; |
| |
| IWL_DEBUG_INFO(priv, "Runtime Alive received.\n"); |
| |
| if (priv->card_alive.is_valid != UCODE_VALID_OK) { |
| /* We had an error bringing up the hardware, so take it |
| * all the way back down so we can try again */ |
| IWL_DEBUG_INFO(priv, "Alive failed.\n"); |
| goto restart; |
| } |
| |
| /* Initialize uCode has loaded Runtime uCode ... verify inst image. |
| * This is a paranoid check, because we would not have gotten the |
| * "runtime" alive if code weren't properly loaded. */ |
| if (iwl4965_verify_ucode(priv)) { |
| /* Runtime instruction load was bad; |
| * take it all the way back down so we can try again */ |
| IWL_DEBUG_INFO(priv, "Bad runtime uCode load.\n"); |
| goto restart; |
| } |
| |
| ret = iwl4965_alive_notify(priv); |
| if (ret) { |
| IWL_WARN(priv, |
| "Could not complete ALIVE transition [ntf]: %d\n", ret); |
| goto restart; |
| } |
| |
| |
| /* After the ALIVE response, we can send host commands to the uCode */ |
| set_bit(STATUS_ALIVE, &priv->status); |
| |
| /* Enable watchdog to monitor the driver tx queues */ |
| iwl_legacy_setup_watchdog(priv); |
| |
| if (iwl_legacy_is_rfkill(priv)) |
| return; |
| |
| ieee80211_wake_queues(priv->hw); |
| |
| priv->active_rate = IWL_RATES_MASK; |
| |
| if (iwl_legacy_is_associated_ctx(ctx)) { |
| struct iwl_legacy_rxon_cmd *active_rxon = |
| (struct iwl_legacy_rxon_cmd *)&ctx->active; |
| /* apply any changes in staging */ |
| ctx->staging.filter_flags |= RXON_FILTER_ASSOC_MSK; |
| active_rxon->filter_flags &= ~RXON_FILTER_ASSOC_MSK; |
| } else { |
| struct iwl_rxon_context *tmp; |
| /* Initialize our rx_config data */ |
| for_each_context(priv, tmp) |
| iwl_legacy_connection_init_rx_config(priv, tmp); |
| |
| if (priv->cfg->ops->hcmd->set_rxon_chain) |
| priv->cfg->ops->hcmd->set_rxon_chain(priv, ctx); |
| } |
| |
| /* Configure bluetooth coexistence if enabled */ |
| iwl_legacy_send_bt_config(priv); |
| |
| iwl4965_reset_run_time_calib(priv); |
| |
| set_bit(STATUS_READY, &priv->status); |
| |
| /* Configure the adapter for unassociated operation */ |
| iwl_legacy_commit_rxon(priv, ctx); |
| |
| /* At this point, the NIC is initialized and operational */ |
| iwl4965_rf_kill_ct_config(priv); |
| |
| IWL_DEBUG_INFO(priv, "ALIVE processing complete.\n"); |
| wake_up_interruptible(&priv->wait_command_queue); |
| |
| iwl_legacy_power_update_mode(priv, true); |
| IWL_DEBUG_INFO(priv, "Updated power mode\n"); |
| |
| return; |
| |
| restart: |
| queue_work(priv->workqueue, &priv->restart); |
| } |
| |
| static void iwl4965_cancel_deferred_work(struct iwl_priv *priv); |
| |
| static void __iwl4965_down(struct iwl_priv *priv) |
| { |
| unsigned long flags; |
| int exit_pending; |
| |
| IWL_DEBUG_INFO(priv, DRV_NAME " is going down\n"); |
| |
| iwl_legacy_scan_cancel_timeout(priv, 200); |
| |
| exit_pending = test_and_set_bit(STATUS_EXIT_PENDING, &priv->status); |
| |
| /* Stop TX queues watchdog. We need to have STATUS_EXIT_PENDING bit set |
| * to prevent rearm timer */ |
| del_timer_sync(&priv->watchdog); |
| |
| iwl_legacy_clear_ucode_stations(priv, NULL); |
| iwl_legacy_dealloc_bcast_stations(priv); |
| iwl_legacy_clear_driver_stations(priv); |
| |
| /* Unblock any waiting calls */ |
| wake_up_interruptible_all(&priv->wait_command_queue); |
| |
| /* Wipe out the EXIT_PENDING status bit if we are not actually |
| * exiting the module */ |
| if (!exit_pending) |
| clear_bit(STATUS_EXIT_PENDING, &priv->status); |
| |
| /* stop and reset the on-board processor */ |
| iwl_write32(priv, CSR_RESET, CSR_RESET_REG_FLAG_NEVO_RESET); |
| |
| /* tell the device to stop sending interrupts */ |
| spin_lock_irqsave(&priv->lock, flags); |
| iwl_legacy_disable_interrupts(priv); |
| spin_unlock_irqrestore(&priv->lock, flags); |
| iwl4965_synchronize_irq(priv); |
| |
| if (priv->mac80211_registered) |
| ieee80211_stop_queues(priv->hw); |
| |
| /* If we have not previously called iwl_init() then |
| * clear all bits but the RF Kill bit and return */ |
| if (!iwl_legacy_is_init(priv)) { |
| priv->status = test_bit(STATUS_RF_KILL_HW, &priv->status) << |
| STATUS_RF_KILL_HW | |
| test_bit(STATUS_GEO_CONFIGURED, &priv->status) << |
| STATUS_GEO_CONFIGURED | |
| test_bit(STATUS_EXIT_PENDING, &priv->status) << |
| STATUS_EXIT_PENDING; |
| goto exit; |
| } |
| |
| /* ...otherwise clear out all the status bits but the RF Kill |
| * bit and continue taking the NIC down. */ |
| priv->status &= test_bit(STATUS_RF_KILL_HW, &priv->status) << |
| STATUS_RF_KILL_HW | |
| test_bit(STATUS_GEO_CONFIGURED, &priv->status) << |
| STATUS_GEO_CONFIGURED | |
| test_bit(STATUS_FW_ERROR, &priv->status) << |
| STATUS_FW_ERROR | |
| test_bit(STATUS_EXIT_PENDING, &priv->status) << |
| STATUS_EXIT_PENDING; |
| |
| iwl4965_txq_ctx_stop(priv); |
| iwl4965_rxq_stop(priv); |
| |
| /* Power-down device's busmaster DMA clocks */ |
| iwl_legacy_write_prph(priv, APMG_CLK_DIS_REG, APMG_CLK_VAL_DMA_CLK_RQT); |
| udelay(5); |
| |
| /* Make sure (redundant) we've released our request to stay awake */ |
| iwl_legacy_clear_bit(priv, CSR_GP_CNTRL, |
| CSR_GP_CNTRL_REG_FLAG_MAC_ACCESS_REQ); |
| |
| /* Stop the device, and put it in low power state */ |
| iwl_legacy_apm_stop(priv); |
| |
| exit: |
| memset(&priv->card_alive, 0, sizeof(struct iwl_alive_resp)); |
| |
| dev_kfree_skb(priv->beacon_skb); |
| priv->beacon_skb = NULL; |
| |
| /* clear out any free frames */ |
| iwl4965_clear_free_frames(priv); |
| } |
| |
| static void iwl4965_down(struct iwl_priv *priv) |
| { |
| mutex_lock(&priv->mutex); |
| __iwl4965_down(priv); |
| mutex_unlock(&priv->mutex); |
| |
| iwl4965_cancel_deferred_work(priv); |
| } |
| |
| #define HW_READY_TIMEOUT (50) |
| |
| static int iwl4965_set_hw_ready(struct iwl_priv *priv) |
| { |
| int ret = 0; |
| |
| iwl_legacy_set_bit(priv, CSR_HW_IF_CONFIG_REG, |
| CSR_HW_IF_CONFIG_REG_BIT_NIC_READY); |
| |
| /* See if we got it */ |
| ret = iwl_poll_bit(priv, CSR_HW_IF_CONFIG_REG, |
| CSR_HW_IF_CONFIG_REG_BIT_NIC_READY, |
| CSR_HW_IF_CONFIG_REG_BIT_NIC_READY, |
| HW_READY_TIMEOUT); |
| if (ret != -ETIMEDOUT) |
| priv->hw_ready = true; |
| else |
| priv->hw_ready = false; |
| |
| IWL_DEBUG_INFO(priv, "hardware %s\n", |
| (priv->hw_ready == 1) ? "ready" : "not ready"); |
| return ret; |
| } |
| |
| static int iwl4965_prepare_card_hw(struct iwl_priv *priv) |
| { |
| int ret = 0; |
| |
| IWL_DEBUG_INFO(priv, "iwl4965_prepare_card_hw enter\n"); |
| |
| ret = iwl4965_set_hw_ready(priv); |
| if (priv->hw_ready) |
| return ret; |
| |
| /* If HW is not ready, prepare the conditions to check again */ |
| iwl_legacy_set_bit(priv, CSR_HW_IF_CONFIG_REG, |
| CSR_HW_IF_CONFIG_REG_PREPARE); |
| |
| ret = iwl_poll_bit(priv, CSR_HW_IF_CONFIG_REG, |
| ~CSR_HW_IF_CONFIG_REG_BIT_NIC_PREPARE_DONE, |
| CSR_HW_IF_CONFIG_REG_BIT_NIC_PREPARE_DONE, 150000); |
| |
| /* HW should be ready by now, check again. */ |
| if (ret != -ETIMEDOUT) |
| iwl4965_set_hw_ready(priv); |
| |
| return ret; |
| } |
| |
| #define MAX_HW_RESTARTS 5 |
| |
| static int __iwl4965_up(struct iwl_priv *priv) |
| { |
| struct iwl_rxon_context *ctx; |
| int i; |
| int ret; |
| |
| if (test_bit(STATUS_EXIT_PENDING, &priv->status)) { |
| IWL_WARN(priv, "Exit pending; will not bring the NIC up\n"); |
| return -EIO; |
| } |
| |
| if (!priv->ucode_data_backup.v_addr || !priv->ucode_data.v_addr) { |
| IWL_ERR(priv, "ucode not available for device bringup\n"); |
| return -EIO; |
| } |
| |
| for_each_context(priv, ctx) { |
| ret = iwl4965_alloc_bcast_station(priv, ctx); |
| if (ret) { |
| iwl_legacy_dealloc_bcast_stations(priv); |
| return ret; |
| } |
| } |
| |
| iwl4965_prepare_card_hw(priv); |
| |
| if (!priv->hw_ready) { |
| IWL_WARN(priv, "Exit HW not ready\n"); |
| return -EIO; |
| } |
| |
| /* If platform's RF_KILL switch is NOT set to KILL */ |
| if (iwl_read32(priv, |
| CSR_GP_CNTRL) & CSR_GP_CNTRL_REG_FLAG_HW_RF_KILL_SW) |
| clear_bit(STATUS_RF_KILL_HW, &priv->status); |
| else |
| set_bit(STATUS_RF_KILL_HW, &priv->status); |
| |
| if (iwl_legacy_is_rfkill(priv)) { |
| wiphy_rfkill_set_hw_state(priv->hw->wiphy, true); |
| |
| iwl_legacy_enable_interrupts(priv); |
| IWL_WARN(priv, "Radio disabled by HW RF Kill switch\n"); |
| return 0; |
| } |
| |
| iwl_write32(priv, CSR_INT, 0xFFFFFFFF); |
| |
| /* must be initialised before iwl_hw_nic_init */ |
| priv->cmd_queue = IWL_DEFAULT_CMD_QUEUE_NUM; |
| |
| ret = iwl4965_hw_nic_init(priv); |
| if (ret) { |
| IWL_ERR(priv, "Unable to init nic\n"); |
| return ret; |
| } |
| |
| /* make sure rfkill handshake bits are cleared */ |
| iwl_write32(priv, CSR_UCODE_DRV_GP1_CLR, CSR_UCODE_SW_BIT_RFKILL); |
| iwl_write32(priv, CSR_UCODE_DRV_GP1_CLR, |
| CSR_UCODE_DRV_GP1_BIT_CMD_BLOCKED); |
| |
| /* clear (again), then enable host interrupts */ |
| iwl_write32(priv, CSR_INT, 0xFFFFFFFF); |
| iwl_legacy_enable_interrupts(priv); |
| |
| /* really make sure rfkill handshake bits are cleared */ |
| iwl_write32(priv, CSR_UCODE_DRV_GP1_CLR, CSR_UCODE_SW_BIT_RFKILL); |
| iwl_write32(priv, CSR_UCODE_DRV_GP1_CLR, CSR_UCODE_SW_BIT_RFKILL); |
| |
| /* Copy original ucode data image from disk into backup cache. |
| * This will be used to initialize the on-board processor's |
| * data SRAM for a clean start when the runtime program first loads. */ |
| memcpy(priv->ucode_data_backup.v_addr, priv->ucode_data.v_addr, |
| priv->ucode_data.len); |
| |
| for (i = 0; i < MAX_HW_RESTARTS; i++) { |
| |
| /* load bootstrap state machine, |
| * load bootstrap program into processor's memory, |
| * prepare to load the "initialize" uCode */ |
| ret = priv->cfg->ops->lib->load_ucode(priv); |
| |
| if (ret) { |
| IWL_ERR(priv, "Unable to set up bootstrap uCode: %d\n", |
| ret); |
| continue; |
| } |
| |
| /* start card; "initialize" will load runtime ucode */ |
| iwl4965_nic_start(priv); |
| |
| IWL_DEBUG_INFO(priv, DRV_NAME " is coming up\n"); |
| |
| return 0; |
| } |
| |
| set_bit(STATUS_EXIT_PENDING, &priv->status); |
| __iwl4965_down(priv); |
| clear_bit(STATUS_EXIT_PENDING, &priv->status); |
| |
| /* tried to restart and config the device for as long as our |
| * patience could withstand */ |
| IWL_ERR(priv, "Unable to initialize device after %d attempts.\n", i); |
| return -EIO; |
| } |
| |
| |
| /***************************************************************************** |
| * |
| * Workqueue callbacks |
| * |
| *****************************************************************************/ |
| |
| static void iwl4965_bg_init_alive_start(struct work_struct *data) |
| { |
| struct iwl_priv *priv = |
| container_of(data, struct iwl_priv, init_alive_start.work); |
| |
| mutex_lock(&priv->mutex); |
| if (test_bit(STATUS_EXIT_PENDING, &priv->status)) |
| goto out; |
| |
| priv->cfg->ops->lib->init_alive_start(priv); |
| out: |
| mutex_unlock(&priv->mutex); |
| } |
| |
| static void iwl4965_bg_alive_start(struct work_struct *data) |
| { |
| struct iwl_priv *priv = |
| container_of(data, struct iwl_priv, alive_start.work); |
| |
| mutex_lock(&priv->mutex); |
| if (test_bit(STATUS_EXIT_PENDING, &priv->status)) |
| goto out; |
| |
| iwl4965_alive_start(priv); |
| out: |
| mutex_unlock(&priv->mutex); |
| } |
| |
| static void iwl4965_bg_run_time_calib_work(struct work_struct *work) |
| { |
| struct iwl_priv *priv = container_of(work, struct iwl_priv, |
| run_time_calib_work); |
| |
| mutex_lock(&priv->mutex); |
| |
| if (test_bit(STATUS_EXIT_PENDING, &priv->status) || |
| test_bit(STATUS_SCANNING, &priv->status)) { |
| mutex_unlock(&priv->mutex); |
| return; |
| } |
| |
| if (priv->start_calib) { |
| iwl4965_chain_noise_calibration(priv, |
| (void *)&priv->_4965.statistics); |
| iwl4965_sensitivity_calibration(priv, |
| (void *)&priv->_4965.statistics); |
| } |
| |
| mutex_unlock(&priv->mutex); |
| } |
| |
| static void iwl4965_bg_restart(struct work_struct *data) |
| { |
| struct iwl_priv *priv = container_of(data, struct iwl_priv, restart); |
| |
| if (test_bit(STATUS_EXIT_PENDING, &priv->status)) |
| return; |
| |
| if (test_and_clear_bit(STATUS_FW_ERROR, &priv->status)) { |
| struct iwl_rxon_context *ctx; |
| |
| mutex_lock(&priv->mutex); |
| for_each_context(priv, ctx) |
| ctx->vif = NULL; |
| priv->is_open = 0; |
| |
| __iwl4965_down(priv); |
| |
| mutex_unlock(&priv->mutex); |
| iwl4965_cancel_deferred_work(priv); |
| ieee80211_restart_hw(priv->hw); |
| } else { |
| iwl4965_down(priv); |
| |
| mutex_lock(&priv->mutex); |
| if (test_bit(STATUS_EXIT_PENDING, &priv->status)) { |
| mutex_unlock(&priv->mutex); |
| return; |
| } |
| |
| __iwl4965_up(priv); |
| mutex_unlock(&priv->mutex); |
| } |
| } |
| |
| static void iwl4965_bg_rx_replenish(struct work_struct *data) |
| { |
| struct iwl_priv *priv = |
| container_of(data, struct iwl_priv, rx_replenish); |
| |
| if (test_bit(STATUS_EXIT_PENDING, &priv->status)) |
| return; |
| |
| mutex_lock(&priv->mutex); |
| iwl4965_rx_replenish(priv); |
| mutex_unlock(&priv->mutex); |
| } |
| |
| /***************************************************************************** |
| * |
| * mac80211 entry point functions |
| * |
| *****************************************************************************/ |
| |
| #define UCODE_READY_TIMEOUT (4 * HZ) |
| |
| /* |
| * Not a mac80211 entry point function, but it fits in with all the |
| * other mac80211 functions grouped here. |
| */ |
| static int iwl4965_mac_setup_register(struct iwl_priv *priv, |
| u32 max_probe_length) |
| { |
| int ret; |
| struct ieee80211_hw *hw = priv->hw; |
| struct iwl_rxon_context *ctx; |
| |
| hw->rate_control_algorithm = "iwl-4965-rs"; |
| |
| /* Tell mac80211 our characteristics */ |
| hw->flags = IEEE80211_HW_SIGNAL_DBM | |
| IEEE80211_HW_AMPDU_AGGREGATION | |
| IEEE80211_HW_NEED_DTIM_PERIOD | |
| IEEE80211_HW_SPECTRUM_MGMT | |
| IEEE80211_HW_REPORTS_TX_ACK_STATUS; |
| |
| if (priv->cfg->sku & IWL_SKU_N) |
| hw->flags |= IEEE80211_HW_SUPPORTS_DYNAMIC_SMPS | |
| IEEE80211_HW_SUPPORTS_STATIC_SMPS; |
| |
| hw->sta_data_size = sizeof(struct iwl_station_priv); |
| hw->vif_data_size = sizeof(struct iwl_vif_priv); |
| |
| for_each_context(priv, ctx) { |
| hw->wiphy->interface_modes |= ctx->interface_modes; |
| hw->wiphy->interface_modes |= ctx->exclusive_interface_modes; |
| } |
| |
| hw->wiphy->flags |= WIPHY_FLAG_CUSTOM_REGULATORY | |
| WIPHY_FLAG_DISABLE_BEACON_HINTS; |
| |
| /* |
| * For now, disable PS by default because it affects |
| * RX performance significantly. |
| */ |
| hw->wiphy->flags &= ~WIPHY_FLAG_PS_ON_BY_DEFAULT; |
| |
| hw->wiphy->max_scan_ssids = PROBE_OPTION_MAX; |
| /* we create the 802.11 header and a zero-length SSID element */ |
| hw->wiphy->max_scan_ie_len = max_probe_length - 24 - 2; |
| |
| /* Default value; 4 EDCA QOS priorities */ |
| hw->queues = 4; |
| |
| hw->max_listen_interval = IWL_CONN_MAX_LISTEN_INTERVAL; |
| |
| if (priv->bands[IEEE80211_BAND_2GHZ].n_channels) |
| priv->hw->wiphy->bands[IEEE80211_BAND_2GHZ] = |
| &priv->bands[IEEE80211_BAND_2GHZ]; |
| if (priv->bands[IEEE80211_BAND_5GHZ].n_channels) |
| priv->hw->wiphy->bands[IEEE80211_BAND_5GHZ] = |
| &priv->bands[IEEE80211_BAND_5GHZ]; |
| |
| iwl_legacy_leds_init(priv); |
| |
| ret = ieee80211_register_hw(priv->hw); |
| if (ret) { |
| IWL_ERR(priv, "Failed to register hw (error %d)\n", ret); |
| return ret; |
| } |
| priv->mac80211_registered = 1; |
| |
| return 0; |
| } |
| |
| |
| int iwl4965_mac_start(struct ieee80211_hw *hw) |
| { |
| struct iwl_priv *priv = hw->priv; |
| int ret; |
| |
| IWL_DEBUG_MAC80211(priv, "enter\n"); |
| |
| /* we should be verifying the device is ready to be opened */ |
| mutex_lock(&priv->mutex); |
| ret = __iwl4965_up(priv); |
| mutex_unlock(&priv->mutex); |
| |
| if (ret) |
| return ret; |
| |
| if (iwl_legacy_is_rfkill(priv)) |
| goto out; |
| |
| IWL_DEBUG_INFO(priv, "Start UP work done.\n"); |
| |
| /* Wait for START_ALIVE from Run Time ucode. Otherwise callbacks from |
| * mac80211 will not be run successfully. */ |
| ret = wait_event_interruptible_timeout(priv->wait_command_queue, |
| test_bit(STATUS_READY, &priv->status), |
| UCODE_READY_TIMEOUT); |
| if (!ret) { |
| if (!test_bit(STATUS_READY, &priv->status)) { |
| IWL_ERR(priv, "START_ALIVE timeout after %dms.\n", |
| jiffies_to_msecs(UCODE_READY_TIMEOUT)); |
| return -ETIMEDOUT; |
| } |
| } |
| |
| iwl4965_led_enable(priv); |
| |
| out: |
| priv->is_open = 1; |
| IWL_DEBUG_MAC80211(priv, "leave\n"); |
| return 0; |
| } |
| |
| void iwl4965_mac_stop(struct ieee80211_hw *hw) |
| { |
| struct iwl_priv *priv = hw->priv; |
| |
| IWL_DEBUG_MAC80211(priv, "enter\n"); |
| |
| if (!priv->is_open) |
| return; |
| |
| priv->is_open = 0; |
| |
| iwl4965_down(priv); |
| |
| flush_workqueue(priv->workqueue); |
| |
| /* User space software may expect getting rfkill changes |
| * even if interface is down */ |
| iwl_write32(priv, CSR_INT, 0xFFFFFFFF); |
| iwl_legacy_enable_rfkill_int(priv); |
| |
| IWL_DEBUG_MAC80211(priv, "leave\n"); |
| } |
| |
| void iwl4965_mac_tx(struct ieee80211_hw *hw, struct sk_buff *skb) |
| { |
| struct iwl_priv *priv = hw->priv; |
| |
| IWL_DEBUG_MACDUMP(priv, "enter\n"); |
| |
| IWL_DEBUG_TX(priv, "dev->xmit(%d bytes) at rate 0x%02x\n", skb->len, |
| ieee80211_get_tx_rate(hw, IEEE80211_SKB_CB(skb))->bitrate); |
| |
| if (iwl4965_tx_skb(priv, skb)) |
| dev_kfree_skb_any(skb); |
| |
| IWL_DEBUG_MACDUMP(priv, "leave\n"); |
| } |
| |
| void iwl4965_mac_update_tkip_key(struct ieee80211_hw *hw, |
| struct ieee80211_vif *vif, |
| struct ieee80211_key_conf *keyconf, |
| struct ieee80211_sta *sta, |
| u32 iv32, u16 *phase1key) |
| { |
| struct iwl_priv *priv = hw->priv; |
| struct iwl_vif_priv *vif_priv = (void *)vif->drv_priv; |
| |
| IWL_DEBUG_MAC80211(priv, "enter\n"); |
| |
| iwl4965_update_tkip_key(priv, vif_priv->ctx, keyconf, sta, |
| iv32, phase1key); |
| |
| IWL_DEBUG_MAC80211(priv, "leave\n"); |
| } |
| |
| int iwl4965_mac_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd, |
| struct ieee80211_vif *vif, struct ieee80211_sta *sta, |
| struct ieee80211_key_conf *key) |
| { |
| struct iwl_priv *priv = hw->priv; |
| struct iwl_vif_priv *vif_priv = (void *)vif->drv_priv; |
| struct iwl_rxon_context *ctx = vif_priv->ctx; |
| int ret; |
| u8 sta_id; |
| bool is_default_wep_key = false; |
| |
| IWL_DEBUG_MAC80211(priv, "enter\n"); |
| |
| if (priv->cfg->mod_params->sw_crypto) { |
| IWL_DEBUG_MAC80211(priv, "leave - hwcrypto disabled\n"); |
| return -EOPNOTSUPP; |
| } |
| |
| sta_id = iwl_legacy_sta_id_or_broadcast(priv, vif_priv->ctx, sta); |
| if (sta_id == IWL_INVALID_STATION) |
| return -EINVAL; |
| |
| mutex_lock(&priv->mutex); |
| iwl_legacy_scan_cancel_timeout(priv, 100); |
| |
| /* |
| * If we are getting WEP group key and we didn't receive any key mapping |
| * so far, we are in legacy wep mode (group key only), otherwise we are |
| * in 1X mode. |
| * In legacy wep mode, we use another host command to the uCode. |
| */ |
| if ((key->cipher == WLAN_CIPHER_SUITE_WEP40 || |
| key->cipher == WLAN_CIPHER_SUITE_WEP104) && |
| !sta) { |
| if (cmd == SET_KEY) |
| is_default_wep_key = !ctx->key_mapping_keys; |
| else |
| is_default_wep_key = |
| (key->hw_key_idx == HW_KEY_DEFAULT); |
| } |
| |
| switch (cmd) { |
| case SET_KEY: |
| if (is_default_wep_key) |
| ret = iwl4965_set_default_wep_key(priv, |
| vif_priv->ctx, key); |
| else |
| ret = iwl4965_set_dynamic_key(priv, vif_priv->ctx, |
| key, sta_id); |
| |
| IWL_DEBUG_MAC80211(priv, "enable hwcrypto key\n"); |
| break; |
| case DISABLE_KEY: |
| if (is_default_wep_key) |
| ret = iwl4965_remove_default_wep_key(priv, ctx, key); |
| else |
| ret = iwl4965_remove_dynamic_key(priv, ctx, |
| key, sta_id); |
| |
| IWL_DEBUG_MAC80211(priv, "disable hwcrypto key\n"); |
| break; |
| default: |
| ret = -EINVAL; |
| } |
| |
| mutex_unlock(&priv->mutex); |
| IWL_DEBUG_MAC80211(priv, "leave\n"); |
| |
| return ret; |
| } |
| |
| int iwl4965_mac_ampdu_action(struct ieee80211_hw *hw, |
| struct ieee80211_vif *vif, |
| enum ieee80211_ampdu_mlme_action action, |
| struct ieee80211_sta *sta, u16 tid, u16 *ssn, |
| u8 buf_size) |
| { |
| struct iwl_priv *priv = hw->priv; |
| int ret = -EINVAL; |
| |
| IWL_DEBUG_HT(priv, "A-MPDU action on addr %pM tid %d\n", |
| sta->addr, tid); |
| |
| if (!(priv->cfg->sku & IWL_SKU_N)) |
| return -EACCES; |
| |
| mutex_lock(&priv->mutex); |
| |
| switch (action) { |
| case IEEE80211_AMPDU_RX_START: |
| IWL_DEBUG_HT(priv, "start Rx\n"); |
| ret = iwl4965_sta_rx_agg_start(priv, sta, tid, *ssn); |
| break; |
| case IEEE80211_AMPDU_RX_STOP: |
| IWL_DEBUG_HT(priv, "stop Rx\n"); |
| ret = iwl4965_sta_rx_agg_stop(priv, sta, tid); |
| if (test_bit(STATUS_EXIT_PENDING, &priv->status)) |
| ret = 0; |
| break; |
| case IEEE80211_AMPDU_TX_START: |
| IWL_DEBUG_HT(priv, "start Tx\n"); |
| ret = iwl4965_tx_agg_start(priv, vif, sta, tid, ssn); |
| if (ret == 0) { |
| priv->_4965.agg_tids_count++; |
| IWL_DEBUG_HT(priv, "priv->_4965.agg_tids_count = %u\n", |
| priv->_4965.agg_tids_count); |
| } |
| break; |
| case IEEE80211_AMPDU_TX_STOP: |
| IWL_DEBUG_HT(priv, "stop Tx\n"); |
| ret = iwl4965_tx_agg_stop(priv, vif, sta, tid); |
| if ((ret == 0) && (priv->_4965.agg_tids_count > 0)) { |
| priv->_4965.agg_tids_count--; |
| IWL_DEBUG_HT(priv, "priv->_4965.agg_tids_count = %u\n", |
| priv->_4965.agg_tids_count); |
| } |
| if (test_bit(STATUS_EXIT_PENDING, &priv->status)) |
| ret = 0; |
| break; |
| case IEEE80211_AMPDU_TX_OPERATIONAL: |
| ret = 0; |
| break; |
| } |
| mutex_unlock(&priv->mutex); |
| |
| return ret; |
| } |
| |
| int iwl4965_mac_sta_add(struct ieee80211_hw *hw, |
| struct ieee80211_vif *vif, |
| struct ieee80211_sta *sta) |
| { |
| struct iwl_priv *priv = hw->priv; |
| struct iwl_station_priv *sta_priv = (void *)sta->drv_priv; |
| struct iwl_vif_priv *vif_priv = (void *)vif->drv_priv; |
| bool is_ap = vif->type == NL80211_IFTYPE_STATION; |
| int ret; |
| u8 sta_id; |
| |
| IWL_DEBUG_INFO(priv, "received request to add station %pM\n", |
| sta->addr); |
| mutex_lock(&priv->mutex); |
| IWL_DEBUG_INFO(priv, "proceeding to add station %pM\n", |
| sta->addr); |
| sta_priv->common.sta_id = IWL_INVALID_STATION; |
| |
| atomic_set(&sta_priv->pending_frames, 0); |
| |
| ret = iwl_legacy_add_station_common(priv, vif_priv->ctx, sta->addr, |
| is_ap, sta, &sta_id); |
| if (ret) { |
| IWL_ERR(priv, "Unable to add station %pM (%d)\n", |
| sta->addr, ret); |
| /* Should we return success if return code is EEXIST ? */ |
| mutex_unlock(&priv->mutex); |
| return ret; |
| } |
| |
| sta_priv->common.sta_id = sta_id; |
| |
| /* Initialize rate scaling */ |
| IWL_DEBUG_INFO(priv, "Initializing rate scaling for station %pM\n", |
| sta->addr); |
| iwl4965_rs_rate_init(priv, sta, sta_id); |
| mutex_unlock(&priv->mutex); |
| |
| return 0; |
| } |
| |
| void iwl4965_mac_channel_switch(struct ieee80211_hw *hw, |
| struct ieee80211_channel_switch *ch_switch) |
| { |
| struct iwl_priv *priv = hw->priv; |
| const struct iwl_channel_info *ch_info; |
| struct ieee80211_conf *conf = &hw->conf; |
| struct ieee80211_channel *channel = ch_switch->channel; |
| struct iwl_ht_config *ht_conf = &priv->current_ht_config; |
| |
| struct iwl_rxon_context *ctx = &priv->contexts[IWL_RXON_CTX_BSS]; |
| u16 ch; |
| unsigned long flags = 0; |
| |
| IWL_DEBUG_MAC80211(priv, "enter\n"); |
| |
| mutex_lock(&priv->mutex); |
| |
| if (iwl_legacy_is_rfkill(priv)) |
| goto out; |
| |
| if (test_bit(STATUS_EXIT_PENDING, &priv->status) || |
| test_bit(STATUS_SCANNING, &priv->status) || |
| test_bit(STATUS_CHANNEL_SWITCH_PENDING, &priv->status)) |
| goto out; |
| |
| if (!iwl_legacy_is_associated_ctx(ctx)) |
| goto out; |
| |
| if (priv->cfg->ops->lib->set_channel_switch) { |
| |
| ch = channel->hw_value; |
| if (le16_to_cpu(ctx->active.channel) != ch) { |
| ch_info = iwl_legacy_get_channel_info(priv, |
| channel->band, |
| ch); |
| if (!iwl_legacy_is_channel_valid(ch_info)) { |
| IWL_DEBUG_MAC80211(priv, "invalid channel\n"); |
| goto out; |
| } |
| spin_lock_irqsave(&priv->lock, flags); |
| |
| priv->current_ht_config.smps = conf->smps_mode; |
| |
| /* Configure HT40 channels */ |
| ctx->ht.enabled = conf_is_ht(conf); |
| if (ctx->ht.enabled) { |
| if (conf_is_ht40_minus(conf)) { |
| ctx->ht.extension_chan_offset = |
| IEEE80211_HT_PARAM_CHA_SEC_BELOW; |
| ctx->ht.is_40mhz = true; |
| } else if (conf_is_ht40_plus(conf)) { |
| ctx->ht.extension_chan_offset = |
| IEEE80211_HT_PARAM_CHA_SEC_ABOVE; |
| ctx->ht.is_40mhz = true; |
| } else { |
| ctx->ht.extension_chan_offset = |
| IEEE80211_HT_PARAM_CHA_SEC_NONE; |
| ctx->ht.is_40mhz = false; |
| } |
| } else |
| ctx->ht.is_40mhz = false; |
| |
| if ((le16_to_cpu(ctx->staging.channel) != ch)) |
| ctx->staging.flags = 0; |
| |
| iwl_legacy_set_rxon_channel(priv, channel, ctx); |
| iwl_legacy_set_rxon_ht(priv, ht_conf); |
| iwl_legacy_set_flags_for_band(priv, ctx, channel->band, |
| ctx->vif); |
| spin_unlock_irqrestore(&priv->lock, flags); |
| |
| iwl_legacy_set_rate(priv); |
| /* |
| * at this point, staging_rxon has the |
| * configuration for channel switch |
| */ |
| set_bit(STATUS_CHANNEL_SWITCH_PENDING, &priv->status); |
| priv->switch_channel = cpu_to_le16(ch); |
| if (priv->cfg->ops->lib->set_channel_switch(priv, ch_switch)) { |
| clear_bit(STATUS_CHANNEL_SWITCH_PENDING, |
| &priv->status); |
| priv->switch_channel = 0; |
| ieee80211_chswitch_done(ctx->vif, false); |
| } |
| } |
| } |
| out: |
| mutex_unlock(&priv->mutex); |
| IWL_DEBUG_MAC80211(priv, "leave\n"); |
| } |
| |
| void iwl4965_configure_filter(struct ieee80211_hw *hw, |
| unsigned int changed_flags, |
| unsigned int *total_flags, |
| u64 multicast) |
| { |
| struct iwl_priv *priv = hw->priv; |
| __le32 filter_or = 0, filter_nand = 0; |
| struct iwl_rxon_context *ctx; |
| |
| #define CHK(test, flag) do { \ |
| if (*total_flags & (test)) \ |
| filter_or |= (flag); \ |
| else \ |
| filter_nand |= (flag); \ |
| } while (0) |
| |
| IWL_DEBUG_MAC80211(priv, "Enter: changed: 0x%x, total: 0x%x\n", |
| changed_flags, *total_flags); |
| |
| CHK(FIF_OTHER_BSS | FIF_PROMISC_IN_BSS, RXON_FILTER_PROMISC_MSK); |
| /* Setting _just_ RXON_FILTER_CTL2HOST_MSK causes FH errors */ |
| CHK(FIF_CONTROL, RXON_FILTER_CTL2HOST_MSK | RXON_FILTER_PROMISC_MSK); |
| CHK(FIF_BCN_PRBRESP_PROMISC, RXON_FILTER_BCON_AWARE_MSK); |
| |
| #undef CHK |
| |
| mutex_lock(&priv->mutex); |
| |
| for_each_context(priv, ctx) { |
| ctx->staging.filter_flags &= ~filter_nand; |
| ctx->staging.filter_flags |= filter_or; |
| |
| /* |
| * Not committing directly because hardware can perform a scan, |
| * but we'll eventually commit the filter flags change anyway. |
| */ |
| } |
| |
| mutex_unlock(&priv->mutex); |
| |
| /* |
| * Receiving all multicast frames is always enabled by the |
| * default flags setup in iwl_legacy_connection_init_rx_config() |
| * since we currently do not support programming multicast |
| * filters into the device. |
| */ |
| *total_flags &= FIF_OTHER_BSS | FIF_ALLMULTI | FIF_PROMISC_IN_BSS | |
| FIF_BCN_PRBRESP_PROMISC | FIF_CONTROL; |
| } |
| |
| /***************************************************************************** |
| * |
| * driver setup and teardown |
| * |
| *****************************************************************************/ |
| |
| static void iwl4965_bg_txpower_work(struct work_struct *work) |
| { |
| struct iwl_priv *priv = container_of(work, struct iwl_priv, |
| txpower_work); |
| |
| mutex_lock(&priv->mutex); |
| |
| /* If a scan happened to start before we got here |
| * then just return; the statistics notification will |
| * kick off another scheduled work to compensate for |
| * any temperature delta we missed here. */ |
| if (test_bit(STATUS_EXIT_PENDING, &priv->status) || |
| test_bit(STATUS_SCANNING, &priv->status)) |
| goto out; |
| |
| /* Regardless of if we are associated, we must reconfigure the |
| * TX power since frames can be sent on non-radar channels while |
| * not associated */ |
| priv->cfg->ops->lib->send_tx_power(priv); |
| |
| /* Update last_temperature to keep is_calib_needed from running |
| * when it isn't needed... */ |
| priv->last_temperature = priv->temperature; |
| out: |
| mutex_unlock(&priv->mutex); |
| } |
| |
| static void iwl4965_setup_deferred_work(struct iwl_priv *priv) |
| { |
| priv->workqueue = create_singlethread_workqueue(DRV_NAME); |
| |
| init_waitqueue_head(&priv->wait_command_queue); |
| |
| INIT_WORK(&priv->restart, iwl4965_bg_restart); |
| INIT_WORK(&priv->rx_replenish, iwl4965_bg_rx_replenish); |
| INIT_WORK(&priv->run_time_calib_work, iwl4965_bg_run_time_calib_work); |
| INIT_DELAYED_WORK(&priv->init_alive_start, iwl4965_bg_init_alive_start); |
| INIT_DELAYED_WORK(&priv->alive_start, iwl4965_bg_alive_start); |
| |
| iwl_legacy_setup_scan_deferred_work(priv); |
| |
| INIT_WORK(&priv->txpower_work, iwl4965_bg_txpower_work); |
| |
| init_timer(&priv->statistics_periodic); |
| priv->statistics_periodic.data = (unsigned long)priv; |
| priv->statistics_periodic.function = iwl4965_bg_statistics_periodic; |
| |
| init_timer(&priv->ucode_trace); |
| priv->ucode_trace.data = (unsigned long)priv; |
| priv->ucode_trace.function = iwl4965_bg_ucode_trace; |
| |
| init_timer(&priv->watchdog); |
| priv->watchdog.data = (unsigned long)priv; |
| priv->watchdog.function = iwl_legacy_bg_watchdog; |
| |
| tasklet_init(&priv->irq_tasklet, (void (*)(unsigned long)) |
| iwl4965_irq_tasklet, (unsigned long)priv); |
| } |
| |
| static void iwl4965_cancel_deferred_work(struct iwl_priv *priv) |
| { |
| cancel_work_sync(&priv->txpower_work); |
| cancel_delayed_work_sync(&priv->init_alive_start); |
| cancel_delayed_work(&priv->alive_start); |
| cancel_work_sync(&priv->run_time_calib_work); |
| |
| iwl_legacy_cancel_scan_deferred_work(priv); |
| |
| del_timer_sync(&priv->statistics_periodic); |
| del_timer_sync(&priv->ucode_trace); |
| } |
| |
| static void iwl4965_init_hw_rates(struct iwl_priv *priv, |
| struct ieee80211_rate *rates) |
| { |
| int i; |
| |
| for (i = 0; i < IWL_RATE_COUNT_LEGACY; i++) { |
| rates[i].bitrate = iwlegacy_rates[i].ieee * 5; |
| rates[i].hw_value = i; /* Rate scaling will work on indexes */ |
| rates[i].hw_value_short = i; |
| rates[i].flags = 0; |
| if ((i >= IWL_FIRST_CCK_RATE) && (i <= IWL_LAST_CCK_RATE)) { |
| /* |
| * If CCK != 1M then set short preamble rate flag. |
| */ |
| rates[i].flags |= |
| (iwlegacy_rates[i].plcp == IWL_RATE_1M_PLCP) ? |
| 0 : IEEE80211_RATE_SHORT_PREAMBLE; |
| } |
| } |
| } |
| /* |
| * Acquire priv->lock before calling this function ! |
| */ |
| void iwl4965_set_wr_ptrs(struct iwl_priv *priv, int txq_id, u32 index) |
| { |
| iwl_legacy_write_direct32(priv, HBUS_TARG_WRPTR, |
| (index & 0xff) | (txq_id << 8)); |
| iwl_legacy_write_prph(priv, IWL49_SCD_QUEUE_RDPTR(txq_id), index); |
| } |
| |
| void iwl4965_tx_queue_set_status(struct iwl_priv *priv, |
| struct iwl_tx_queue *txq, |
| int tx_fifo_id, int scd_retry) |
| { |
| int txq_id = txq->q.id; |
| |
| /* Find out whether to activate Tx queue */ |
| int active = test_bit(txq_id, &priv->txq_ctx_active_msk) ? 1 : 0; |
| |
| /* Set up and activate */ |
| iwl_legacy_write_prph(priv, IWL49_SCD_QUEUE_STATUS_BITS(txq_id), |
| (active << IWL49_SCD_QUEUE_STTS_REG_POS_ACTIVE) | |
| (tx_fifo_id << IWL49_SCD_QUEUE_STTS_REG_POS_TXF) | |
| (scd_retry << IWL49_SCD_QUEUE_STTS_REG_POS_WSL) | |
| (scd_retry << IWL49_SCD_QUEUE_STTS_REG_POS_SCD_ACK) | |
| IWL49_SCD_QUEUE_STTS_REG_MSK); |
| |
| txq->sched_retry = scd_retry; |
| |
| IWL_DEBUG_INFO(priv, "%s %s Queue %d on AC %d\n", |
| active ? "Activate" : "Deactivate", |
| scd_retry ? "BA" : "AC", txq_id, tx_fifo_id); |
| } |
| |
| |
| static int iwl4965_init_drv(struct iwl_priv *priv) |
| { |
| int ret; |
| |
| spin_lock_init(&priv->sta_lock); |
| spin_lock_init(&priv->hcmd_lock); |
| |
| INIT_LIST_HEAD(&priv->free_frames); |
| |
| mutex_init(&priv->mutex); |
| |
| priv->ieee_channels = NULL; |
| priv->ieee_rates = NULL; |
| priv->band = IEEE80211_BAND_2GHZ; |
| |
| priv->iw_mode = NL80211_IFTYPE_STATION; |
| priv->current_ht_config.smps = IEEE80211_SMPS_STATIC; |
| priv->missed_beacon_threshold = IWL_MISSED_BEACON_THRESHOLD_DEF; |
| priv->_4965.agg_tids_count = 0; |
| |
| /* initialize force reset */ |
| priv->force_reset[IWL_RF_RESET].reset_duration = |
| IWL_DELAY_NEXT_FORCE_RF_RESET; |
| priv->force_reset[IWL_FW_RESET].reset_duration = |
| IWL_DELAY_NEXT_FORCE_FW_RELOAD; |
| |
| /* Choose which receivers/antennas to use */ |
| if (priv->cfg->ops->hcmd->set_rxon_chain) |
| priv->cfg->ops->hcmd->set_rxon_chain(priv, |
| &priv->contexts[IWL_RXON_CTX_BSS]); |
| |
| iwl_legacy_init_scan_params(priv); |
| |
| ret = iwl_legacy_init_channel_map(priv); |
| if (ret) { |
| IWL_ERR(priv, "initializing regulatory failed: %d\n", ret); |
| goto err; |
| } |
| |
| ret = iwl_legacy_init_geos(priv); |
| if (ret) { |
| IWL_ERR(priv, "initializing geos failed: %d\n", ret); |
| goto err_free_channel_map; |
| } |
| iwl4965_init_hw_rates(priv, priv->ieee_rates); |
| |
| return 0; |
| |
| err_free_channel_map: |
| iwl_legacy_free_channel_map(priv); |
| err: |
| return ret; |
| } |
| |
| static void iwl4965_uninit_drv(struct iwl_priv *priv) |
| { |
| iwl4965_calib_free_results(priv); |
| iwl_legacy_free_geos(priv); |
| iwl_legacy_free_channel_map(priv); |
| kfree(priv->scan_cmd); |
| } |
| |
| static void iwl4965_hw_detect(struct iwl_priv *priv) |
| { |
| priv->hw_rev = _iwl_legacy_read32(priv, CSR_HW_REV); |
| priv->hw_wa_rev = _iwl_legacy_read32(priv, CSR_HW_REV_WA_REG); |
| priv->rev_id = priv->pci_dev->revision; |
| IWL_DEBUG_INFO(priv, "HW Revision ID = 0x%X\n", priv->rev_id); |
| } |
| |
| static int iwl4965_set_hw_params(struct iwl_priv *priv) |
| { |
| priv->hw_params.max_rxq_size = RX_QUEUE_SIZE; |
| priv->hw_params.max_rxq_log = RX_QUEUE_SIZE_LOG; |
| if (priv->cfg->mod_params->amsdu_size_8K) |
| priv->hw_params.rx_page_order = get_order(IWL_RX_BUF_SIZE_8K); |
| else |
| priv->hw_params.rx_page_order = get_order(IWL_RX_BUF_SIZE_4K); |
| |
| priv->hw_params.max_beacon_itrvl = IWL_MAX_UCODE_BEACON_INTERVAL; |
| |
| if (priv->cfg->mod_params->disable_11n) |
| priv->cfg->sku &= ~IWL_SKU_N; |
| |
| /* Device-specific setup */ |
| return priv->cfg->ops->lib->set_hw_params(priv); |
| } |
| |
| static const u8 iwl4965_bss_ac_to_fifo[] = { |
| IWL_TX_FIFO_VO, |
| IWL_TX_FIFO_VI, |
| IWL_TX_FIFO_BE, |
| IWL_TX_FIFO_BK, |
| }; |
| |
| static const u8 iwl4965_bss_ac_to_queue[] = { |
| 0, 1, 2, 3, |
| }; |
| |
| static int |
| iwl4965_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent) |
| { |
| int err = 0, i; |
| struct iwl_priv *priv; |
| struct ieee80211_hw *hw; |
| struct iwl_cfg *cfg = (struct iwl_cfg *)(ent->driver_data); |
| unsigned long flags; |
| u16 pci_cmd; |
| |
| /************************ |
| * 1. Allocating HW data |
| ************************/ |
| |
| hw = iwl_legacy_alloc_all(cfg); |
| if (!hw) { |
| err = -ENOMEM; |
| goto out; |
| } |
| priv = hw->priv; |
| /* At this point both hw and priv are allocated. */ |
| |
| /* |
| * The default context is always valid, |
| * more may be discovered when firmware |
| * is loaded. |
| */ |
| priv->valid_contexts = BIT(IWL_RXON_CTX_BSS); |
| |
| for (i = 0; i < NUM_IWL_RXON_CTX; i++) |
| priv->contexts[i].ctxid = i; |
| |
| priv->contexts[IWL_RXON_CTX_BSS].always_active = true; |
| priv->contexts[IWL_RXON_CTX_BSS].is_active = true; |
| priv->contexts[IWL_RXON_CTX_BSS].rxon_cmd = REPLY_RXON; |
| priv->contexts[IWL_RXON_CTX_BSS].rxon_timing_cmd = REPLY_RXON_TIMING; |
| priv->contexts[IWL_RXON_CTX_BSS].rxon_assoc_cmd = REPLY_RXON_ASSOC; |
| priv->contexts[IWL_RXON_CTX_BSS].qos_cmd = REPLY_QOS_PARAM; |
| priv->contexts[IWL_RXON_CTX_BSS].ap_sta_id = IWL_AP_ID; |
| priv->contexts[IWL_RXON_CTX_BSS].wep_key_cmd = REPLY_WEPKEY; |
| priv->contexts[IWL_RXON_CTX_BSS].ac_to_fifo = iwl4965_bss_ac_to_fifo; |
| priv->contexts[IWL_RXON_CTX_BSS].ac_to_queue = iwl4965_bss_ac_to_queue; |
| priv->contexts[IWL_RXON_CTX_BSS].exclusive_interface_modes = |
| BIT(NL80211_IFTYPE_ADHOC); |
| priv->contexts[IWL_RXON_CTX_BSS].interface_modes = |
| BIT(NL80211_IFTYPE_STATION); |
| priv->contexts[IWL_RXON_CTX_BSS].ap_devtype = RXON_DEV_TYPE_AP; |
| priv->contexts[IWL_RXON_CTX_BSS].ibss_devtype = RXON_DEV_TYPE_IBSS; |
| priv->contexts[IWL_RXON_CTX_BSS].station_devtype = RXON_DEV_TYPE_ESS; |
| priv->contexts[IWL_RXON_CTX_BSS].unused_devtype = RXON_DEV_TYPE_ESS; |
| |
| BUILD_BUG_ON(NUM_IWL_RXON_CTX != 1); |
| |
| SET_IEEE80211_DEV(hw, &pdev->dev); |
| |
| IWL_DEBUG_INFO(priv, "*** LOAD DRIVER ***\n"); |
| priv->cfg = cfg; |
| priv->pci_dev = pdev; |
| priv->inta_mask = CSR_INI_SET_MASK; |
| |
| if (iwl_legacy_alloc_traffic_mem(priv)) |
| IWL_ERR(priv, "Not enough memory to generate traffic log\n"); |
| |
| /************************** |
| * 2. Initializing PCI bus |
| **************************/ |
| pci_disable_link_state(pdev, PCIE_LINK_STATE_L0S | PCIE_LINK_STATE_L1 | |
| PCIE_LINK_STATE_CLKPM); |
| |
| if (pci_enable_device(pdev)) { |
| err = -ENODEV; |
| goto out_ieee80211_free_hw; |
| } |
| |
| pci_set_master(pdev); |
| |
| err = pci_set_dma_mask(pdev, DMA_BIT_MASK(36)); |
| if (!err) |
| err = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(36)); |
| if (err) { |
| err = pci_set_dma_mask(pdev, DMA_BIT_MASK(32)); |
| if (!err) |
| err = pci_set_consistent_dma_mask(pdev, |
| DMA_BIT_MASK(32)); |
| /* both attempts failed: */ |
| if (err) { |
| IWL_WARN(priv, "No suitable DMA available.\n"); |
| goto out_pci_disable_device; |
| } |
| } |
| |
| err = pci_request_regions(pdev, DRV_NAME); |
| if (err) |
| goto out_pci_disable_device; |
| |
| pci_set_drvdata(pdev, priv); |
| |
| |
| /*********************** |
| * 3. Read REV register |
| ***********************/ |
| priv->hw_base = pci_iomap(pdev, 0, 0); |
| if (!priv->hw_base) { |
| err = -ENODEV; |
| goto out_pci_release_regions; |
| } |
| |
| IWL_DEBUG_INFO(priv, "pci_resource_len = 0x%08llx\n", |
| (unsigned long long) pci_resource_len(pdev, 0)); |
| IWL_DEBUG_INFO(priv, "pci_resource_base = %p\n", priv->hw_base); |
| |
| /* these spin locks will be used in apm_ops.init and EEPROM access |
| * we should init now |
| */ |
| spin_lock_init(&priv->reg_lock); |
| spin_lock_init(&priv->lock); |
| |
| /* |
| * stop and reset the on-board processor just in case it is in a |
| * strange state ... like being left stranded by a primary kernel |
| * and this is now the kdump kernel trying to start up |
| */ |
| iwl_write32(priv, CSR_RESET, CSR_RESET_REG_FLAG_NEVO_RESET); |
| |
| iwl4965_hw_detect(priv); |
| IWL_INFO(priv, "Detected %s, REV=0x%X\n", |
| priv->cfg->name, priv->hw_rev); |
| |
| /* We disable the RETRY_TIMEOUT register (0x41) to keep |
| * PCI Tx retries from interfering with C3 CPU state */ |
| pci_write_config_byte(pdev, PCI_CFG_RETRY_TIMEOUT, 0x00); |
| |
| iwl4965_prepare_card_hw(priv); |
| if (!priv->hw_ready) { |
| IWL_WARN(priv, "Failed, HW not ready\n"); |
| goto out_iounmap; |
| } |
| |
| /***************** |
| * 4. Read EEPROM |
| *****************/ |
| /* Read the EEPROM */ |
| err = iwl_legacy_eeprom_init(priv); |
| if (err) { |
| IWL_ERR(priv, "Unable to init EEPROM\n"); |
| goto out_iounmap; |
| } |
| err = iwl4965_eeprom_check_version(priv); |
| if (err) |
| goto out_free_eeprom; |
| |
| if (err) |
| goto out_free_eeprom; |
| |
| /* extract MAC Address */ |
| iwl4965_eeprom_get_mac(priv, priv->addresses[0].addr); |
| IWL_DEBUG_INFO(priv, "MAC address: %pM\n", priv->addresses[0].addr); |
| priv->hw->wiphy->addresses = priv->addresses; |
| priv->hw->wiphy->n_addresses = 1; |
| |
| /************************ |
| * 5. Setup HW constants |
| ************************/ |
| if (iwl4965_set_hw_params(priv)) { |
| IWL_ERR(priv, "failed to set hw parameters\n"); |
| goto out_free_eeprom; |
| } |
| |
| /******************* |
| * 6. Setup priv |
| *******************/ |
| |
| err = iwl4965_init_drv(priv); |
| if (err) |
| goto out_free_eeprom; |
| /* At this point both hw and priv are initialized. */ |
| |
| /******************** |
| * 7. Setup services |
| ********************/ |
| spin_lock_irqsave(&priv->lock, flags); |
| iwl_legacy_disable_interrupts(priv); |
| spin_unlock_irqrestore(&priv->lock, flags); |
| |
| pci_enable_msi(priv->pci_dev); |
| |
| err = request_irq(priv->pci_dev->irq, iwl_legacy_isr, |
| IRQF_SHARED, DRV_NAME, priv); |
| if (err) { |
| IWL_ERR(priv, "Error allocating IRQ %d\n", priv->pci_dev->irq); |
| goto out_disable_msi; |
| } |
| |
| iwl4965_setup_deferred_work(priv); |
| iwl4965_setup_rx_handlers(priv); |
| |
| /********************************************* |
| * 8. Enable interrupts and read RFKILL state |
| *********************************************/ |
| |
| /* enable rfkill interrupt: hw bug w/a */ |
| pci_read_config_word(priv->pci_dev, PCI_COMMAND, &pci_cmd); |
| if (pci_cmd & PCI_COMMAND_INTX_DISABLE) { |
| pci_cmd &= ~PCI_COMMAND_INTX_DISABLE; |
| pci_write_config_word(priv->pci_dev, PCI_COMMAND, pci_cmd); |
| } |
| |
| iwl_legacy_enable_rfkill_int(priv); |
| |
| /* If platform's RF_KILL switch is NOT set to KILL */ |
| if (iwl_read32(priv, CSR_GP_CNTRL) & |
| CSR_GP_CNTRL_REG_FLAG_HW_RF_KILL_SW) |
| clear_bit(STATUS_RF_KILL_HW, &priv->status); |
| else |
| set_bit(STATUS_RF_KILL_HW, &priv->status); |
| |
| wiphy_rfkill_set_hw_state(priv->hw->wiphy, |
| test_bit(STATUS_RF_KILL_HW, &priv->status)); |
| |
| iwl_legacy_power_initialize(priv); |
| |
| init_completion(&priv->_4965.firmware_loading_complete); |
| |
| err = iwl4965_request_firmware(priv, true); |
| if (err) |
| goto out_destroy_workqueue; |
| |
| return 0; |
| |
| out_destroy_workqueue: |
| destroy_workqueue(priv->workqueue); |
| priv->workqueue = NULL; |
| free_irq(priv->pci_dev->irq, priv); |
| out_disable_msi: |
| pci_disable_msi(priv->pci_dev); |
| iwl4965_uninit_drv(priv); |
| out_free_eeprom: |
| iwl_legacy_eeprom_free(priv); |
| out_iounmap: |
| pci_iounmap(pdev, priv->hw_base); |
| out_pci_release_regions: |
| pci_set_drvdata(pdev, NULL); |
| pci_release_regions(pdev); |
| out_pci_disable_device: |
| pci_disable_device(pdev); |
| out_ieee80211_free_hw: |
| iwl_legacy_free_traffic_mem(priv); |
| ieee80211_free_hw(priv->hw); |
| out: |
| return err; |
| } |
| |
| static void __devexit iwl4965_pci_remove(struct pci_dev *pdev) |
| { |
| struct iwl_priv *priv = pci_get_drvdata(pdev); |
| unsigned long flags; |
| |
| if (!priv) |
| return; |
| |
| wait_for_completion(&priv->_4965.firmware_loading_complete); |
| |
| IWL_DEBUG_INFO(priv, "*** UNLOAD DRIVER ***\n"); |
| |
| iwl_legacy_dbgfs_unregister(priv); |
| sysfs_remove_group(&pdev->dev.kobj, &iwl_attribute_group); |
| |
| /* ieee80211_unregister_hw call wil cause iwl_mac_stop to |
| * to be called and iwl4965_down since we are removing the device |
| * we need to set STATUS_EXIT_PENDING bit. |
| */ |
| set_bit(STATUS_EXIT_PENDING, &priv->status); |
| |
| iwl_legacy_leds_exit(priv); |
| |
| if (priv->mac80211_registered) { |
| ieee80211_unregister_hw(priv->hw); |
| priv->mac80211_registered = 0; |
| } else { |
| iwl4965_down(priv); |
| } |
| |
| /* |
| * Make sure device is reset to low power before unloading driver. |
| * This may be redundant with iwl4965_down(), but there are paths to |
| * run iwl4965_down() without calling apm_ops.stop(), and there are |
| * paths to avoid running iwl4965_down() at all before leaving driver. |
| * This (inexpensive) call *makes sure* device is reset. |
| */ |
| iwl_legacy_apm_stop(priv); |
| |
| /* make sure we flush any pending irq or |
| * tasklet for the driver |
| */ |
| spin_lock_irqsave(&priv->lock, flags); |
| iwl_legacy_disable_interrupts(priv); |
| spin_unlock_irqrestore(&priv->lock, flags); |
| |
| iwl4965_synchronize_irq(priv); |
| |
| iwl4965_dealloc_ucode_pci(priv); |
| |
| if (priv->rxq.bd) |
| iwl4965_rx_queue_free(priv, &priv->rxq); |
| iwl4965_hw_txq_ctx_free(priv); |
| |
| iwl_legacy_eeprom_free(priv); |
| |
| |
| /*netif_stop_queue(dev); */ |
| flush_workqueue(priv->workqueue); |
| |
| /* ieee80211_unregister_hw calls iwl_mac_stop, which flushes |
| * priv->workqueue... so we can't take down the workqueue |
| * until now... */ |
| destroy_workqueue(priv->workqueue); |
| priv->workqueue = NULL; |
| iwl_legacy_free_traffic_mem(priv); |
| |
| free_irq(priv->pci_dev->irq, priv); |
| pci_disable_msi(priv->pci_dev); |
| pci_iounmap(pdev, priv->hw_base); |
| pci_release_regions(pdev); |
| pci_disable_device(pdev); |
| pci_set_drvdata(pdev, NULL); |
| |
| iwl4965_uninit_drv(priv); |
| |
| dev_kfree_skb(priv->beacon_skb); |
| |
| ieee80211_free_hw(priv->hw); |
| } |
| |
| /* |
| * Activate/Deactivate Tx DMA/FIFO channels according tx fifos mask |
| * must be called under priv->lock and mac access |
| */ |
| void iwl4965_txq_set_sched(struct iwl_priv *priv, u32 mask) |
| { |
| iwl_legacy_write_prph(priv, IWL49_SCD_TXFACT, mask); |
| } |
| |
| /***************************************************************************** |
| * |
| * driver and module entry point |
| * |
| *****************************************************************************/ |
| |
| /* Hardware specific file defines the PCI IDs table for that hardware module */ |
| static DEFINE_PCI_DEVICE_TABLE(iwl4965_hw_card_ids) = { |
| #if defined(CONFIG_IWL4965_MODULE) || defined(CONFIG_IWL4965) |
| {IWL_PCI_DEVICE(0x4229, PCI_ANY_ID, iwl4965_cfg)}, |
| {IWL_PCI_DEVICE(0x4230, PCI_ANY_ID, iwl4965_cfg)}, |
| #endif /* CONFIG_IWL4965 */ |
| |
| {0} |
| }; |
| MODULE_DEVICE_TABLE(pci, iwl4965_hw_card_ids); |
| |
| static struct pci_driver iwl4965_driver = { |
| .name = DRV_NAME, |
| .id_table = iwl4965_hw_card_ids, |
| .probe = iwl4965_pci_probe, |
| .remove = __devexit_p(iwl4965_pci_remove), |
| .driver.pm = IWL_LEGACY_PM_OPS, |
| }; |
| |
| static int __init iwl4965_init(void) |
| { |
| |
| int ret; |
| pr_info(DRV_DESCRIPTION ", " DRV_VERSION "\n"); |
| pr_info(DRV_COPYRIGHT "\n"); |
| |
| ret = iwl4965_rate_control_register(); |
| if (ret) { |
| pr_err("Unable to register rate control algorithm: %d\n", ret); |
| return ret; |
| } |
| |
| ret = pci_register_driver(&iwl4965_driver); |
| if (ret) { |
| pr_err("Unable to initialize PCI module\n"); |
| goto error_register; |
| } |
| |
| return ret; |
| |
| error_register: |
| iwl4965_rate_control_unregister(); |
| return ret; |
| } |
| |
| static void __exit iwl4965_exit(void) |
| { |
| pci_unregister_driver(&iwl4965_driver); |
| iwl4965_rate_control_unregister(); |
| } |
| |
| module_exit(iwl4965_exit); |
| module_init(iwl4965_init); |
| |
| #ifdef CONFIG_IWLWIFI_LEGACY_DEBUG |
| module_param_named(debug, iwlegacy_debug_level, uint, S_IRUGO | S_IWUSR); |
| MODULE_PARM_DESC(debug, "debug output mask"); |
| #endif |
| |
| module_param_named(swcrypto, iwl4965_mod_params.sw_crypto, int, S_IRUGO); |
| MODULE_PARM_DESC(swcrypto, "using crypto in software (default 0 [hardware])"); |
| module_param_named(queues_num, iwl4965_mod_params.num_of_queues, int, S_IRUGO); |
| MODULE_PARM_DESC(queues_num, "number of hw queues."); |
| module_param_named(11n_disable, iwl4965_mod_params.disable_11n, int, S_IRUGO); |
| MODULE_PARM_DESC(11n_disable, "disable 11n functionality"); |
| module_param_named(amsdu_size_8K, iwl4965_mod_params.amsdu_size_8K, |
| int, S_IRUGO); |
| MODULE_PARM_DESC(amsdu_size_8K, "enable 8K amsdu size"); |
| module_param_named(fw_restart, iwl4965_mod_params.restart_fw, int, S_IRUGO); |
| MODULE_PARM_DESC(fw_restart, "restart firmware in case of error"); |