| /* |
| * bios-less APM driver for ARM Linux |
| * Jamey Hicks <jamey@crl.dec.com> |
| * adapted from the APM BIOS driver for Linux by Stephen Rothwell (sfr@linuxcare.com) |
| * |
| * APM 1.2 Reference: |
| * Intel Corporation, Microsoft Corporation. Advanced Power Management |
| * (APM) BIOS Interface Specification, Revision 1.2, February 1996. |
| * |
| * This document is available from Microsoft at: |
| * http://www.microsoft.com/whdc/archive/amp_12.mspx |
| */ |
| #include <linux/module.h> |
| #include <linux/poll.h> |
| #include <linux/slab.h> |
| #include <linux/mutex.h> |
| #include <linux/proc_fs.h> |
| #include <linux/seq_file.h> |
| #include <linux/miscdevice.h> |
| #include <linux/apm_bios.h> |
| #include <linux/capability.h> |
| #include <linux/sched.h> |
| #include <linux/suspend.h> |
| #include <linux/apm-emulation.h> |
| #include <linux/freezer.h> |
| #include <linux/device.h> |
| #include <linux/kernel.h> |
| #include <linux/list.h> |
| #include <linux/init.h> |
| #include <linux/completion.h> |
| #include <linux/kthread.h> |
| #include <linux/delay.h> |
| |
| #include <asm/system.h> |
| |
| /* |
| * The apm_bios device is one of the misc char devices. |
| * This is its minor number. |
| */ |
| #define APM_MINOR_DEV 134 |
| |
| /* |
| * See Documentation/Config.help for the configuration options. |
| * |
| * Various options can be changed at boot time as follows: |
| * (We allow underscores for compatibility with the modules code) |
| * apm=on/off enable/disable APM |
| */ |
| |
| /* |
| * Maximum number of events stored |
| */ |
| #define APM_MAX_EVENTS 16 |
| |
| struct apm_queue { |
| unsigned int event_head; |
| unsigned int event_tail; |
| apm_event_t events[APM_MAX_EVENTS]; |
| }; |
| |
| /* |
| * thread states (for threads using a writable /dev/apm_bios fd): |
| * |
| * SUSPEND_NONE: nothing happening |
| * SUSPEND_PENDING: suspend event queued for thread and pending to be read |
| * SUSPEND_READ: suspend event read, pending acknowledgement |
| * SUSPEND_ACKED: acknowledgement received from thread (via ioctl), |
| * waiting for resume |
| * SUSPEND_ACKTO: acknowledgement timeout |
| * SUSPEND_DONE: thread had acked suspend and is now notified of |
| * resume |
| * |
| * SUSPEND_WAIT: this thread invoked suspend and is waiting for resume |
| * |
| * A thread migrates in one of three paths: |
| * NONE -1-> PENDING -2-> READ -3-> ACKED -4-> DONE -5-> NONE |
| * -6-> ACKTO -7-> NONE |
| * NONE -8-> WAIT -9-> NONE |
| * |
| * While in PENDING or READ, the thread is accounted for in the |
| * suspend_acks_pending counter. |
| * |
| * The transitions are invoked as follows: |
| * 1: suspend event is signalled from the core PM code |
| * 2: the suspend event is read from the fd by the userspace thread |
| * 3: userspace thread issues the APM_IOC_SUSPEND ioctl (as ack) |
| * 4: core PM code signals that we have resumed |
| * 5: APM_IOC_SUSPEND ioctl returns |
| * |
| * 6: the notifier invoked from the core PM code timed out waiting |
| * for all relevant threds to enter ACKED state and puts those |
| * that haven't into ACKTO |
| * 7: those threads issue APM_IOC_SUSPEND ioctl too late, |
| * get an error |
| * |
| * 8: userspace thread issues the APM_IOC_SUSPEND ioctl (to suspend), |
| * ioctl code invokes pm_suspend() |
| * 9: pm_suspend() returns indicating resume |
| */ |
| enum apm_suspend_state { |
| SUSPEND_NONE, |
| SUSPEND_PENDING, |
| SUSPEND_READ, |
| SUSPEND_ACKED, |
| SUSPEND_ACKTO, |
| SUSPEND_WAIT, |
| SUSPEND_DONE, |
| }; |
| |
| /* |
| * The per-file APM data |
| */ |
| struct apm_user { |
| struct list_head list; |
| |
| unsigned int suser: 1; |
| unsigned int writer: 1; |
| unsigned int reader: 1; |
| |
| int suspend_result; |
| enum apm_suspend_state suspend_state; |
| |
| struct apm_queue queue; |
| }; |
| |
| /* |
| * Local variables |
| */ |
| static atomic_t suspend_acks_pending = ATOMIC_INIT(0); |
| static atomic_t userspace_notification_inhibit = ATOMIC_INIT(0); |
| static int apm_disabled; |
| static struct task_struct *kapmd_tsk; |
| |
| static DECLARE_WAIT_QUEUE_HEAD(apm_waitqueue); |
| static DECLARE_WAIT_QUEUE_HEAD(apm_suspend_waitqueue); |
| |
| /* |
| * This is a list of everyone who has opened /dev/apm_bios |
| */ |
| static DECLARE_RWSEM(user_list_lock); |
| static LIST_HEAD(apm_user_list); |
| |
| /* |
| * kapmd info. kapmd provides us a process context to handle |
| * "APM" events within - specifically necessary if we're going |
| * to be suspending the system. |
| */ |
| static DECLARE_WAIT_QUEUE_HEAD(kapmd_wait); |
| static DEFINE_SPINLOCK(kapmd_queue_lock); |
| static struct apm_queue kapmd_queue; |
| |
| static DEFINE_MUTEX(state_lock); |
| |
| static const char driver_version[] = "1.13"; /* no spaces */ |
| |
| |
| |
| /* |
| * Compatibility cruft until the IPAQ people move over to the new |
| * interface. |
| */ |
| static void __apm_get_power_status(struct apm_power_info *info) |
| { |
| } |
| |
| /* |
| * This allows machines to provide their own "apm get power status" function. |
| */ |
| void (*apm_get_power_status)(struct apm_power_info *) = __apm_get_power_status; |
| EXPORT_SYMBOL(apm_get_power_status); |
| |
| |
| /* |
| * APM event queue management. |
| */ |
| static inline int queue_empty(struct apm_queue *q) |
| { |
| return q->event_head == q->event_tail; |
| } |
| |
| static inline apm_event_t queue_get_event(struct apm_queue *q) |
| { |
| q->event_tail = (q->event_tail + 1) % APM_MAX_EVENTS; |
| return q->events[q->event_tail]; |
| } |
| |
| static void queue_add_event(struct apm_queue *q, apm_event_t event) |
| { |
| q->event_head = (q->event_head + 1) % APM_MAX_EVENTS; |
| if (q->event_head == q->event_tail) { |
| static int notified; |
| |
| if (notified++ == 0) |
| printk(KERN_ERR "apm: an event queue overflowed\n"); |
| q->event_tail = (q->event_tail + 1) % APM_MAX_EVENTS; |
| } |
| q->events[q->event_head] = event; |
| } |
| |
| static void queue_event(apm_event_t event) |
| { |
| struct apm_user *as; |
| |
| down_read(&user_list_lock); |
| list_for_each_entry(as, &apm_user_list, list) { |
| if (as->reader) |
| queue_add_event(&as->queue, event); |
| } |
| up_read(&user_list_lock); |
| wake_up_interruptible(&apm_waitqueue); |
| } |
| |
| static ssize_t apm_read(struct file *fp, char __user *buf, size_t count, loff_t *ppos) |
| { |
| struct apm_user *as = fp->private_data; |
| apm_event_t event; |
| int i = count, ret = 0; |
| |
| if (count < sizeof(apm_event_t)) |
| return -EINVAL; |
| |
| if (queue_empty(&as->queue) && fp->f_flags & O_NONBLOCK) |
| return -EAGAIN; |
| |
| wait_event_interruptible(apm_waitqueue, !queue_empty(&as->queue)); |
| |
| while ((i >= sizeof(event)) && !queue_empty(&as->queue)) { |
| event = queue_get_event(&as->queue); |
| |
| ret = -EFAULT; |
| if (copy_to_user(buf, &event, sizeof(event))) |
| break; |
| |
| mutex_lock(&state_lock); |
| if (as->suspend_state == SUSPEND_PENDING && |
| (event == APM_SYS_SUSPEND || event == APM_USER_SUSPEND)) |
| as->suspend_state = SUSPEND_READ; |
| mutex_unlock(&state_lock); |
| |
| buf += sizeof(event); |
| i -= sizeof(event); |
| } |
| |
| if (i < count) |
| ret = count - i; |
| |
| return ret; |
| } |
| |
| static unsigned int apm_poll(struct file *fp, poll_table * wait) |
| { |
| struct apm_user *as = fp->private_data; |
| |
| poll_wait(fp, &apm_waitqueue, wait); |
| return queue_empty(&as->queue) ? 0 : POLLIN | POLLRDNORM; |
| } |
| |
| /* |
| * apm_ioctl - handle APM ioctl |
| * |
| * APM_IOC_SUSPEND |
| * This IOCTL is overloaded, and performs two functions. It is used to: |
| * - initiate a suspend |
| * - acknowledge a suspend read from /dev/apm_bios. |
| * Only when everyone who has opened /dev/apm_bios with write permission |
| * has acknowledge does the actual suspend happen. |
| */ |
| static long |
| apm_ioctl(struct file *filp, u_int cmd, u_long arg) |
| { |
| struct apm_user *as = filp->private_data; |
| int err = -EINVAL; |
| |
| if (!as->suser || !as->writer) |
| return -EPERM; |
| |
| switch (cmd) { |
| case APM_IOC_SUSPEND: |
| mutex_lock(&state_lock); |
| |
| as->suspend_result = -EINTR; |
| |
| switch (as->suspend_state) { |
| case SUSPEND_READ: |
| /* |
| * If we read a suspend command from /dev/apm_bios, |
| * then the corresponding APM_IOC_SUSPEND ioctl is |
| * interpreted as an acknowledge. |
| */ |
| as->suspend_state = SUSPEND_ACKED; |
| atomic_dec(&suspend_acks_pending); |
| mutex_unlock(&state_lock); |
| |
| /* |
| * suspend_acks_pending changed, the notifier needs to |
| * be woken up for this |
| */ |
| wake_up(&apm_suspend_waitqueue); |
| |
| /* |
| * Wait for the suspend/resume to complete. If there |
| * are pending acknowledges, we wait here for them. |
| */ |
| freezer_do_not_count(); |
| |
| wait_event(apm_suspend_waitqueue, |
| as->suspend_state == SUSPEND_DONE); |
| |
| /* |
| * Since we are waiting until the suspend is done, the |
| * try_to_freeze() in freezer_count() will not trigger |
| */ |
| freezer_count(); |
| break; |
| case SUSPEND_ACKTO: |
| as->suspend_result = -ETIMEDOUT; |
| mutex_unlock(&state_lock); |
| break; |
| default: |
| as->suspend_state = SUSPEND_WAIT; |
| mutex_unlock(&state_lock); |
| |
| /* |
| * Otherwise it is a request to suspend the system. |
| * Just invoke pm_suspend(), we'll handle it from |
| * there via the notifier. |
| */ |
| as->suspend_result = pm_suspend(PM_SUSPEND_MEM); |
| } |
| |
| mutex_lock(&state_lock); |
| err = as->suspend_result; |
| as->suspend_state = SUSPEND_NONE; |
| mutex_unlock(&state_lock); |
| break; |
| } |
| |
| return err; |
| } |
| |
| static int apm_release(struct inode * inode, struct file * filp) |
| { |
| struct apm_user *as = filp->private_data; |
| |
| filp->private_data = NULL; |
| |
| down_write(&user_list_lock); |
| list_del(&as->list); |
| up_write(&user_list_lock); |
| |
| /* |
| * We are now unhooked from the chain. As far as new |
| * events are concerned, we no longer exist. |
| */ |
| mutex_lock(&state_lock); |
| if (as->suspend_state == SUSPEND_PENDING || |
| as->suspend_state == SUSPEND_READ) |
| atomic_dec(&suspend_acks_pending); |
| mutex_unlock(&state_lock); |
| |
| wake_up(&apm_suspend_waitqueue); |
| |
| kfree(as); |
| return 0; |
| } |
| |
| static int apm_open(struct inode * inode, struct file * filp) |
| { |
| struct apm_user *as; |
| |
| as = kzalloc(sizeof(*as), GFP_KERNEL); |
| if (as) { |
| /* |
| * XXX - this is a tiny bit broken, when we consider BSD |
| * process accounting. If the device is opened by root, we |
| * instantly flag that we used superuser privs. Who knows, |
| * we might close the device immediately without doing a |
| * privileged operation -- cevans |
| */ |
| as->suser = capable(CAP_SYS_ADMIN); |
| as->writer = (filp->f_mode & FMODE_WRITE) == FMODE_WRITE; |
| as->reader = (filp->f_mode & FMODE_READ) == FMODE_READ; |
| |
| down_write(&user_list_lock); |
| list_add(&as->list, &apm_user_list); |
| up_write(&user_list_lock); |
| |
| filp->private_data = as; |
| } |
| |
| return as ? 0 : -ENOMEM; |
| } |
| |
| static const struct file_operations apm_bios_fops = { |
| .owner = THIS_MODULE, |
| .read = apm_read, |
| .poll = apm_poll, |
| .unlocked_ioctl = apm_ioctl, |
| .open = apm_open, |
| .release = apm_release, |
| .llseek = noop_llseek, |
| }; |
| |
| static struct miscdevice apm_device = { |
| .minor = APM_MINOR_DEV, |
| .name = "apm_bios", |
| .fops = &apm_bios_fops |
| }; |
| |
| |
| #ifdef CONFIG_PROC_FS |
| /* |
| * Arguments, with symbols from linux/apm_bios.h. |
| * |
| * 0) Linux driver version (this will change if format changes) |
| * 1) APM BIOS Version. Usually 1.0, 1.1 or 1.2. |
| * 2) APM flags from APM Installation Check (0x00): |
| * bit 0: APM_16_BIT_SUPPORT |
| * bit 1: APM_32_BIT_SUPPORT |
| * bit 2: APM_IDLE_SLOWS_CLOCK |
| * bit 3: APM_BIOS_DISABLED |
| * bit 4: APM_BIOS_DISENGAGED |
| * 3) AC line status |
| * 0x00: Off-line |
| * 0x01: On-line |
| * 0x02: On backup power (BIOS >= 1.1 only) |
| * 0xff: Unknown |
| * 4) Battery status |
| * 0x00: High |
| * 0x01: Low |
| * 0x02: Critical |
| * 0x03: Charging |
| * 0x04: Selected battery not present (BIOS >= 1.2 only) |
| * 0xff: Unknown |
| * 5) Battery flag |
| * bit 0: High |
| * bit 1: Low |
| * bit 2: Critical |
| * bit 3: Charging |
| * bit 7: No system battery |
| * 0xff: Unknown |
| * 6) Remaining battery life (percentage of charge): |
| * 0-100: valid |
| * -1: Unknown |
| * 7) Remaining battery life (time units): |
| * Number of remaining minutes or seconds |
| * -1: Unknown |
| * 8) min = minutes; sec = seconds |
| */ |
| static int proc_apm_show(struct seq_file *m, void *v) |
| { |
| struct apm_power_info info; |
| char *units; |
| |
| info.ac_line_status = 0xff; |
| info.battery_status = 0xff; |
| info.battery_flag = 0xff; |
| info.battery_life = -1; |
| info.time = -1; |
| info.units = -1; |
| |
| if (apm_get_power_status) |
| apm_get_power_status(&info); |
| |
| switch (info.units) { |
| default: units = "?"; break; |
| case 0: units = "min"; break; |
| case 1: units = "sec"; break; |
| } |
| |
| seq_printf(m, "%s 1.2 0x%02x 0x%02x 0x%02x 0x%02x %d%% %d %s\n", |
| driver_version, APM_32_BIT_SUPPORT, |
| info.ac_line_status, info.battery_status, |
| info.battery_flag, info.battery_life, |
| info.time, units); |
| |
| return 0; |
| } |
| |
| static int proc_apm_open(struct inode *inode, struct file *file) |
| { |
| return single_open(file, proc_apm_show, NULL); |
| } |
| |
| static const struct file_operations apm_proc_fops = { |
| .owner = THIS_MODULE, |
| .open = proc_apm_open, |
| .read = seq_read, |
| .llseek = seq_lseek, |
| .release = single_release, |
| }; |
| #endif |
| |
| static int kapmd(void *arg) |
| { |
| do { |
| apm_event_t event; |
| |
| wait_event_interruptible(kapmd_wait, |
| !queue_empty(&kapmd_queue) || kthread_should_stop()); |
| |
| if (kthread_should_stop()) |
| break; |
| |
| spin_lock_irq(&kapmd_queue_lock); |
| event = 0; |
| if (!queue_empty(&kapmd_queue)) |
| event = queue_get_event(&kapmd_queue); |
| spin_unlock_irq(&kapmd_queue_lock); |
| |
| switch (event) { |
| case 0: |
| break; |
| |
| case APM_LOW_BATTERY: |
| case APM_POWER_STATUS_CHANGE: |
| queue_event(event); |
| break; |
| |
| case APM_USER_SUSPEND: |
| case APM_SYS_SUSPEND: |
| pm_suspend(PM_SUSPEND_MEM); |
| break; |
| |
| case APM_CRITICAL_SUSPEND: |
| atomic_inc(&userspace_notification_inhibit); |
| pm_suspend(PM_SUSPEND_MEM); |
| atomic_dec(&userspace_notification_inhibit); |
| break; |
| } |
| } while (1); |
| |
| return 0; |
| } |
| |
| static int apm_suspend_notifier(struct notifier_block *nb, |
| unsigned long event, |
| void *dummy) |
| { |
| struct apm_user *as; |
| int err; |
| |
| /* short-cut emergency suspends */ |
| if (atomic_read(&userspace_notification_inhibit)) |
| return NOTIFY_DONE; |
| |
| switch (event) { |
| case PM_SUSPEND_PREPARE: |
| /* |
| * Queue an event to all "writer" users that we want |
| * to suspend and need their ack. |
| */ |
| mutex_lock(&state_lock); |
| down_read(&user_list_lock); |
| |
| list_for_each_entry(as, &apm_user_list, list) { |
| if (as->suspend_state != SUSPEND_WAIT && as->reader && |
| as->writer && as->suser) { |
| as->suspend_state = SUSPEND_PENDING; |
| atomic_inc(&suspend_acks_pending); |
| queue_add_event(&as->queue, APM_USER_SUSPEND); |
| } |
| } |
| |
| up_read(&user_list_lock); |
| mutex_unlock(&state_lock); |
| wake_up_interruptible(&apm_waitqueue); |
| |
| /* |
| * Wait for the the suspend_acks_pending variable to drop to |
| * zero, meaning everybody acked the suspend event (or the |
| * process was killed.) |
| * |
| * If the app won't answer within a short while we assume it |
| * locked up and ignore it. |
| */ |
| err = wait_event_interruptible_timeout( |
| apm_suspend_waitqueue, |
| atomic_read(&suspend_acks_pending) == 0, |
| 5*HZ); |
| |
| /* timed out */ |
| if (err == 0) { |
| /* |
| * Move anybody who timed out to "ack timeout" state. |
| * |
| * We could time out and the userspace does the ACK |
| * right after we time out but before we enter the |
| * locked section here, but that's fine. |
| */ |
| mutex_lock(&state_lock); |
| down_read(&user_list_lock); |
| list_for_each_entry(as, &apm_user_list, list) { |
| if (as->suspend_state == SUSPEND_PENDING || |
| as->suspend_state == SUSPEND_READ) { |
| as->suspend_state = SUSPEND_ACKTO; |
| atomic_dec(&suspend_acks_pending); |
| } |
| } |
| up_read(&user_list_lock); |
| mutex_unlock(&state_lock); |
| } |
| |
| /* let suspend proceed */ |
| if (err >= 0) |
| return NOTIFY_OK; |
| |
| /* interrupted by signal */ |
| return notifier_from_errno(err); |
| |
| case PM_POST_SUSPEND: |
| /* |
| * Anyone on the APM queues will think we're still suspended. |
| * Send a message so everyone knows we're now awake again. |
| */ |
| queue_event(APM_NORMAL_RESUME); |
| |
| /* |
| * Finally, wake up anyone who is sleeping on the suspend. |
| */ |
| mutex_lock(&state_lock); |
| down_read(&user_list_lock); |
| list_for_each_entry(as, &apm_user_list, list) { |
| if (as->suspend_state == SUSPEND_ACKED) { |
| /* |
| * TODO: maybe grab error code, needs core |
| * changes to push the error to the notifier |
| * chain (could use the second parameter if |
| * implemented) |
| */ |
| as->suspend_result = 0; |
| as->suspend_state = SUSPEND_DONE; |
| } |
| } |
| up_read(&user_list_lock); |
| mutex_unlock(&state_lock); |
| |
| wake_up(&apm_suspend_waitqueue); |
| return NOTIFY_OK; |
| |
| default: |
| return NOTIFY_DONE; |
| } |
| } |
| |
| static struct notifier_block apm_notif_block = { |
| .notifier_call = apm_suspend_notifier, |
| }; |
| |
| static int __init apm_init(void) |
| { |
| int ret; |
| |
| if (apm_disabled) { |
| printk(KERN_NOTICE "apm: disabled on user request.\n"); |
| return -ENODEV; |
| } |
| |
| kapmd_tsk = kthread_create(kapmd, NULL, "kapmd"); |
| if (IS_ERR(kapmd_tsk)) { |
| ret = PTR_ERR(kapmd_tsk); |
| kapmd_tsk = NULL; |
| goto out; |
| } |
| wake_up_process(kapmd_tsk); |
| |
| #ifdef CONFIG_PROC_FS |
| proc_create("apm", 0, NULL, &apm_proc_fops); |
| #endif |
| |
| ret = misc_register(&apm_device); |
| if (ret) |
| goto out_stop; |
| |
| ret = register_pm_notifier(&apm_notif_block); |
| if (ret) |
| goto out_unregister; |
| |
| return 0; |
| |
| out_unregister: |
| misc_deregister(&apm_device); |
| out_stop: |
| remove_proc_entry("apm", NULL); |
| kthread_stop(kapmd_tsk); |
| out: |
| return ret; |
| } |
| |
| static void __exit apm_exit(void) |
| { |
| unregister_pm_notifier(&apm_notif_block); |
| misc_deregister(&apm_device); |
| remove_proc_entry("apm", NULL); |
| |
| kthread_stop(kapmd_tsk); |
| } |
| |
| module_init(apm_init); |
| module_exit(apm_exit); |
| |
| MODULE_AUTHOR("Stephen Rothwell"); |
| MODULE_DESCRIPTION("Advanced Power Management"); |
| MODULE_LICENSE("GPL"); |
| |
| #ifndef MODULE |
| static int __init apm_setup(char *str) |
| { |
| while ((str != NULL) && (*str != '\0')) { |
| if (strncmp(str, "off", 3) == 0) |
| apm_disabled = 1; |
| if (strncmp(str, "on", 2) == 0) |
| apm_disabled = 0; |
| str = strchr(str, ','); |
| if (str != NULL) |
| str += strspn(str, ", \t"); |
| } |
| return 1; |
| } |
| |
| __setup("apm=", apm_setup); |
| #endif |
| |
| /** |
| * apm_queue_event - queue an APM event for kapmd |
| * @event: APM event |
| * |
| * Queue an APM event for kapmd to process and ultimately take the |
| * appropriate action. Only a subset of events are handled: |
| * %APM_LOW_BATTERY |
| * %APM_POWER_STATUS_CHANGE |
| * %APM_USER_SUSPEND |
| * %APM_SYS_SUSPEND |
| * %APM_CRITICAL_SUSPEND |
| */ |
| void apm_queue_event(apm_event_t event) |
| { |
| unsigned long flags; |
| |
| spin_lock_irqsave(&kapmd_queue_lock, flags); |
| queue_add_event(&kapmd_queue, event); |
| spin_unlock_irqrestore(&kapmd_queue_lock, flags); |
| |
| wake_up_interruptible(&kapmd_wait); |
| } |
| EXPORT_SYMBOL(apm_queue_event); |