| /* |
| * Linux driver attachment glue for PCI based controllers. |
| * |
| * Copyright (c) 2000-2001 Adaptec Inc. |
| * All rights reserved. |
| * |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that the following conditions |
| * are met: |
| * 1. Redistributions of source code must retain the above copyright |
| * notice, this list of conditions, and the following disclaimer, |
| * without modification. |
| * 2. Redistributions in binary form must reproduce at minimum a disclaimer |
| * substantially similar to the "NO WARRANTY" disclaimer below |
| * ("Disclaimer") and any redistribution must be conditioned upon |
| * including a substantially similar Disclaimer requirement for further |
| * binary redistribution. |
| * 3. Neither the names of the above-listed copyright holders nor the names |
| * of any contributors may be used to endorse or promote products derived |
| * from this software without specific prior written permission. |
| * |
| * Alternatively, this software may be distributed under the terms of the |
| * GNU General Public License ("GPL") version 2 as published by the Free |
| * Software Foundation. |
| * |
| * NO WARRANTY |
| * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS |
| * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT |
| * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR |
| * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT |
| * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL |
| * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS |
| * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) |
| * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, |
| * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING |
| * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE |
| * POSSIBILITY OF SUCH DAMAGES. |
| * |
| * $Id: //depot/aic7xxx/linux/drivers/scsi/aic7xxx/aic7xxx_osm_pci.c#47 $ |
| */ |
| |
| #include "aic7xxx_osm.h" |
| #include "aic7xxx_pci.h" |
| |
| static int ahc_linux_pci_dev_probe(struct pci_dev *pdev, |
| const struct pci_device_id *ent); |
| static int ahc_linux_pci_reserve_io_region(struct ahc_softc *ahc, |
| u_long *base); |
| static int ahc_linux_pci_reserve_mem_region(struct ahc_softc *ahc, |
| u_long *bus_addr, |
| uint8_t __iomem **maddr); |
| static void ahc_linux_pci_dev_remove(struct pci_dev *pdev); |
| |
| /* Define the macro locally since it's different for different class of chips. |
| */ |
| #define ID(x) ID_C(x, PCI_CLASS_STORAGE_SCSI) |
| |
| static struct pci_device_id ahc_linux_pci_id_table[] = { |
| /* aic7850 based controllers */ |
| ID(ID_AHA_2902_04_10_15_20C_30C), |
| /* aic7860 based controllers */ |
| ID(ID_AHA_2930CU), |
| ID(ID_AHA_1480A & ID_DEV_VENDOR_MASK), |
| ID(ID_AHA_2940AU_0 & ID_DEV_VENDOR_MASK), |
| ID(ID_AHA_2940AU_CN & ID_DEV_VENDOR_MASK), |
| ID(ID_AHA_2930C_VAR & ID_DEV_VENDOR_MASK), |
| /* aic7870 based controllers */ |
| ID(ID_AHA_2940), |
| ID(ID_AHA_3940), |
| ID(ID_AHA_398X), |
| ID(ID_AHA_2944), |
| ID(ID_AHA_3944), |
| ID(ID_AHA_4944), |
| /* aic7880 based controllers */ |
| ID(ID_AHA_2940U & ID_DEV_VENDOR_MASK), |
| ID(ID_AHA_3940U & ID_DEV_VENDOR_MASK), |
| ID(ID_AHA_2944U & ID_DEV_VENDOR_MASK), |
| ID(ID_AHA_3944U & ID_DEV_VENDOR_MASK), |
| ID(ID_AHA_398XU & ID_DEV_VENDOR_MASK), |
| ID(ID_AHA_4944U & ID_DEV_VENDOR_MASK), |
| ID(ID_AHA_2930U & ID_DEV_VENDOR_MASK), |
| ID(ID_AHA_2940U_PRO & ID_DEV_VENDOR_MASK), |
| ID(ID_AHA_2940U_CN & ID_DEV_VENDOR_MASK), |
| /* aic7890 based controllers */ |
| ID(ID_AHA_2930U2), |
| ID(ID_AHA_2940U2B), |
| ID(ID_AHA_2940U2_OEM), |
| ID(ID_AHA_2940U2), |
| ID(ID_AHA_2950U2B), |
| ID16(ID_AIC7890_ARO & ID_AIC7895_ARO_MASK), |
| ID(ID_AAA_131U2), |
| /* aic7890 based controllers */ |
| ID(ID_AHA_29160), |
| ID(ID_AHA_29160_CPQ), |
| ID(ID_AHA_29160N), |
| ID(ID_AHA_29160C), |
| ID(ID_AHA_29160B), |
| ID(ID_AHA_19160B), |
| ID(ID_AIC7892_ARO), |
| /* aic7892 based controllers */ |
| ID(ID_AHA_2940U_DUAL), |
| ID(ID_AHA_3940AU), |
| ID(ID_AHA_3944AU), |
| ID(ID_AIC7895_ARO), |
| ID(ID_AHA_3950U2B_0), |
| ID(ID_AHA_3950U2B_1), |
| ID(ID_AHA_3950U2D_0), |
| ID(ID_AHA_3950U2D_1), |
| ID(ID_AIC7896_ARO), |
| /* aic7899 based controllers */ |
| ID(ID_AHA_3960D), |
| ID(ID_AHA_3960D_CPQ), |
| ID(ID_AIC7899_ARO), |
| /* Generic chip probes for devices we don't know exactly. */ |
| ID(ID_AIC7850 & ID_DEV_VENDOR_MASK), |
| ID(ID_AIC7855 & ID_DEV_VENDOR_MASK), |
| ID(ID_AIC7859 & ID_DEV_VENDOR_MASK), |
| ID(ID_AIC7860 & ID_DEV_VENDOR_MASK), |
| ID(ID_AIC7870 & ID_DEV_VENDOR_MASK), |
| ID(ID_AIC7880 & ID_DEV_VENDOR_MASK), |
| ID16(ID_AIC7890 & ID_9005_GENERIC_MASK), |
| ID16(ID_AIC7892 & ID_9005_GENERIC_MASK), |
| ID(ID_AIC7895 & ID_DEV_VENDOR_MASK), |
| ID16(ID_AIC7896 & ID_9005_GENERIC_MASK), |
| ID16(ID_AIC7899 & ID_9005_GENERIC_MASK), |
| ID(ID_AIC7810 & ID_DEV_VENDOR_MASK), |
| ID(ID_AIC7815 & ID_DEV_VENDOR_MASK), |
| { 0 } |
| }; |
| |
| MODULE_DEVICE_TABLE(pci, ahc_linux_pci_id_table); |
| |
| struct pci_driver aic7xxx_pci_driver = { |
| .name = "aic7xxx", |
| .probe = ahc_linux_pci_dev_probe, |
| .remove = ahc_linux_pci_dev_remove, |
| .id_table = ahc_linux_pci_id_table |
| }; |
| |
| static void |
| ahc_linux_pci_dev_remove(struct pci_dev *pdev) |
| { |
| struct ahc_softc *ahc = pci_get_drvdata(pdev); |
| u_long s; |
| |
| if (ahc->platform_data && ahc->platform_data->host) |
| scsi_remove_host(ahc->platform_data->host); |
| |
| ahc_lock(ahc, &s); |
| ahc_intr_enable(ahc, FALSE); |
| ahc_unlock(ahc, &s); |
| ahc_free(ahc); |
| } |
| |
| static void |
| ahc_linux_pci_inherit_flags(struct ahc_softc *ahc) |
| { |
| struct pci_dev *pdev = ahc->dev_softc, *master_pdev; |
| unsigned int master_devfn = PCI_DEVFN(PCI_SLOT(pdev->devfn), 0); |
| |
| master_pdev = pci_get_slot(pdev->bus, master_devfn); |
| if (master_pdev) { |
| struct ahc_softc *master = pci_get_drvdata(master_pdev); |
| if (master) { |
| ahc->flags &= ~AHC_BIOS_ENABLED; |
| ahc->flags |= master->flags & AHC_BIOS_ENABLED; |
| |
| ahc->flags &= ~AHC_PRIMARY_CHANNEL; |
| ahc->flags |= master->flags & AHC_PRIMARY_CHANNEL; |
| } else |
| printk(KERN_ERR "aic7xxx: no multichannel peer found!\n"); |
| pci_dev_put(master_pdev); |
| } |
| } |
| |
| static int |
| ahc_linux_pci_dev_probe(struct pci_dev *pdev, const struct pci_device_id *ent) |
| { |
| char buf[80]; |
| const uint64_t mask_39bit = 0x7FFFFFFFFFULL; |
| struct ahc_softc *ahc; |
| ahc_dev_softc_t pci; |
| struct ahc_pci_identity *entry; |
| char *name; |
| int error; |
| struct device *dev = &pdev->dev; |
| |
| pci = pdev; |
| entry = ahc_find_pci_device(pci); |
| if (entry == NULL) |
| return (-ENODEV); |
| |
| /* |
| * Allocate a softc for this card and |
| * set it up for attachment by our |
| * common detect routine. |
| */ |
| sprintf(buf, "ahc_pci:%d:%d:%d", |
| ahc_get_pci_bus(pci), |
| ahc_get_pci_slot(pci), |
| ahc_get_pci_function(pci)); |
| name = malloc(strlen(buf) + 1, M_DEVBUF, M_NOWAIT); |
| if (name == NULL) |
| return (-ENOMEM); |
| strcpy(name, buf); |
| ahc = ahc_alloc(NULL, name); |
| if (ahc == NULL) |
| return (-ENOMEM); |
| if (pci_enable_device(pdev)) { |
| ahc_free(ahc); |
| return (-ENODEV); |
| } |
| pci_set_master(pdev); |
| |
| if (sizeof(dma_addr_t) > 4 |
| && ahc->features & AHC_LARGE_SCBS |
| && dma_set_mask(dev, mask_39bit) == 0 |
| && dma_get_required_mask(dev) > DMA_32BIT_MASK) { |
| ahc->flags |= AHC_39BIT_ADDRESSING; |
| } else { |
| if (dma_set_mask(dev, DMA_32BIT_MASK)) { |
| ahc_free(ahc); |
| printk(KERN_WARNING "aic7xxx: No suitable DMA available.\n"); |
| return (-ENODEV); |
| } |
| } |
| ahc->dev_softc = pci; |
| error = ahc_pci_config(ahc, entry); |
| if (error != 0) { |
| ahc_free(ahc); |
| return (-error); |
| } |
| |
| /* |
| * Second Function PCI devices need to inherit some |
| * settings from function 0. |
| */ |
| if ((ahc->features & AHC_MULTI_FUNC) && PCI_FUNC(pdev->devfn) != 0) |
| ahc_linux_pci_inherit_flags(ahc); |
| |
| pci_set_drvdata(pdev, ahc); |
| ahc_linux_register_host(ahc, &aic7xxx_driver_template); |
| return (0); |
| } |
| |
| int |
| ahc_linux_pci_init(void) |
| { |
| /* Translate error or zero return into zero or one */ |
| return pci_module_init(&aic7xxx_pci_driver) ? 0 : 1; |
| } |
| |
| void |
| ahc_linux_pci_exit(void) |
| { |
| pci_unregister_driver(&aic7xxx_pci_driver); |
| } |
| |
| static int |
| ahc_linux_pci_reserve_io_region(struct ahc_softc *ahc, u_long *base) |
| { |
| if (aic7xxx_allow_memio == 0) |
| return (ENOMEM); |
| |
| *base = pci_resource_start(ahc->dev_softc, 0); |
| if (*base == 0) |
| return (ENOMEM); |
| if (request_region(*base, 256, "aic7xxx") == 0) |
| return (ENOMEM); |
| return (0); |
| } |
| |
| static int |
| ahc_linux_pci_reserve_mem_region(struct ahc_softc *ahc, |
| u_long *bus_addr, |
| uint8_t __iomem **maddr) |
| { |
| u_long start; |
| int error; |
| |
| error = 0; |
| start = pci_resource_start(ahc->dev_softc, 1); |
| if (start != 0) { |
| *bus_addr = start; |
| if (request_mem_region(start, 0x1000, "aic7xxx") == 0) |
| error = ENOMEM; |
| if (error == 0) { |
| *maddr = ioremap_nocache(start, 256); |
| if (*maddr == NULL) { |
| error = ENOMEM; |
| release_mem_region(start, 0x1000); |
| } |
| } |
| } else |
| error = ENOMEM; |
| return (error); |
| } |
| |
| int |
| ahc_pci_map_registers(struct ahc_softc *ahc) |
| { |
| uint32_t command; |
| u_long base; |
| uint8_t __iomem *maddr; |
| int error; |
| |
| /* |
| * If its allowed, we prefer memory mapped access. |
| */ |
| command = ahc_pci_read_config(ahc->dev_softc, PCIR_COMMAND, 4); |
| command &= ~(PCIM_CMD_PORTEN|PCIM_CMD_MEMEN); |
| base = 0; |
| maddr = NULL; |
| error = ahc_linux_pci_reserve_mem_region(ahc, &base, &maddr); |
| if (error == 0) { |
| ahc->platform_data->mem_busaddr = base; |
| ahc->tag = BUS_SPACE_MEMIO; |
| ahc->bsh.maddr = maddr; |
| ahc_pci_write_config(ahc->dev_softc, PCIR_COMMAND, |
| command | PCIM_CMD_MEMEN, 4); |
| |
| /* |
| * Do a quick test to see if memory mapped |
| * I/O is functioning correctly. |
| */ |
| if (ahc_pci_test_register_access(ahc) != 0) { |
| |
| printf("aic7xxx: PCI Device %d:%d:%d " |
| "failed memory mapped test. Using PIO.\n", |
| ahc_get_pci_bus(ahc->dev_softc), |
| ahc_get_pci_slot(ahc->dev_softc), |
| ahc_get_pci_function(ahc->dev_softc)); |
| iounmap(maddr); |
| release_mem_region(ahc->platform_data->mem_busaddr, |
| 0x1000); |
| ahc->bsh.maddr = NULL; |
| maddr = NULL; |
| } else |
| command |= PCIM_CMD_MEMEN; |
| } else { |
| printf("aic7xxx: PCI%d:%d:%d MEM region 0x%lx " |
| "unavailable. Cannot memory map device.\n", |
| ahc_get_pci_bus(ahc->dev_softc), |
| ahc_get_pci_slot(ahc->dev_softc), |
| ahc_get_pci_function(ahc->dev_softc), |
| base); |
| } |
| |
| /* |
| * We always prefer memory mapped access. |
| */ |
| if (maddr == NULL) { |
| |
| error = ahc_linux_pci_reserve_io_region(ahc, &base); |
| if (error == 0) { |
| ahc->tag = BUS_SPACE_PIO; |
| ahc->bsh.ioport = base; |
| command |= PCIM_CMD_PORTEN; |
| } else { |
| printf("aic7xxx: PCI%d:%d:%d IO region 0x%lx[0..255] " |
| "unavailable. Cannot map device.\n", |
| ahc_get_pci_bus(ahc->dev_softc), |
| ahc_get_pci_slot(ahc->dev_softc), |
| ahc_get_pci_function(ahc->dev_softc), |
| base); |
| } |
| } |
| ahc_pci_write_config(ahc->dev_softc, PCIR_COMMAND, command, 4); |
| return (error); |
| } |
| |
| int |
| ahc_pci_map_int(struct ahc_softc *ahc) |
| { |
| int error; |
| |
| error = request_irq(ahc->dev_softc->irq, ahc_linux_isr, |
| IRQF_SHARED, "aic7xxx", ahc); |
| if (error == 0) |
| ahc->platform_data->irq = ahc->dev_softc->irq; |
| |
| return (-error); |
| } |
| |