| /****************************************************************************** |
| * |
| * Copyright(c) 2007 - 2012 Realtek Corporation. All rights reserved. |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of version 2 of the GNU General Public License as |
| * published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful, but WITHOUT |
| * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or |
| * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for |
| * more details. |
| * |
| ******************************************************************************/ |
| #define _RTW_MLME_EXT_C_ |
| |
| #include <osdep_service.h> |
| #include <drv_types.h> |
| #include <wifi.h> |
| #include <rtw_mlme_ext.h> |
| #include <wlan_bssdef.h> |
| #include <mlme_osdep.h> |
| #include <recv_osdep.h> |
| #include <ethernet.h> |
| #include <linux/ieee80211.h> |
| |
| #ifdef CONFIG_8723AU_BT_COEXIST |
| #include <rtl8723a_hal.h> |
| #endif |
| |
| static struct mlme_handler mlme_sta_tbl[]={ |
| {"OnAssocReq23a", &OnAssocReq23a}, |
| {"OnAssocRsp23a", &OnAssocRsp23a}, |
| {"OnReAssocReq", &OnAssocReq23a}, |
| {"OnReAssocRsp", &OnAssocRsp23a}, |
| {"OnProbeReq23a", &OnProbeReq23a}, |
| {"OnProbeRsp23a", &OnProbeRsp23a}, |
| |
| /*---------------------------------------------------------- |
| below 2 are reserved |
| -----------------------------------------------------------*/ |
| {"DoReserved23a", &DoReserved23a}, |
| {"DoReserved23a", &DoReserved23a}, |
| {"OnBeacon23a", &OnBeacon23a}, |
| {"OnATIM", &OnAtim23a}, |
| {"OnDisassoc23a", &OnDisassoc23a}, |
| {"OnAuth23a", &OnAuth23aClient23a}, |
| {"OnDeAuth23a", &OnDeAuth23a}, |
| {"OnAction23a", &OnAction23a}, |
| }; |
| |
| static struct action_handler OnAction23a_tbl[]={ |
| {WLAN_CATEGORY_SPECTRUM_MGMT, "ACTION_SPECTRUM_MGMT", on_action_spct23a}, |
| {WLAN_CATEGORY_QOS, "ACTION_QOS", &OnAction23a_qos}, |
| {WLAN_CATEGORY_DLS, "ACTION_DLS", &OnAction23a_dls}, |
| {WLAN_CATEGORY_BACK, "ACTION_BACK", &OnAction23a_back23a}, |
| {WLAN_CATEGORY_PUBLIC, "ACTION_PUBLIC", on_action_public23a}, |
| {WLAN_CATEGORY_HT, "ACTION_HT", &OnAction23a_ht}, |
| {WLAN_CATEGORY_SA_QUERY, "ACTION_SA_QUERY", &DoReserved23a}, |
| {WLAN_CATEGORY_WMM, "ACTION_WMM", &OnAction23a_wmm}, |
| {WLAN_CATEGORY_VENDOR_SPECIFIC, "ACTION_P2P", &OnAction23a_p2p}, |
| }; |
| |
| static u8 null_addr[ETH_ALEN]= {0, 0, 0, 0, 0, 0}; |
| |
| /************************************************** |
| OUI definitions for the vendor specific IE |
| ***************************************************/ |
| unsigned char RTW_WPA_OUI23A[] = {0x00, 0x50, 0xf2, 0x01}; |
| unsigned char WMM_OUI23A[] = {0x00, 0x50, 0xf2, 0x02}; |
| unsigned char WPS_OUI23A[] = {0x00, 0x50, 0xf2, 0x04}; |
| unsigned char P2P_OUI23A[] = {0x50, 0x6F, 0x9A, 0x09}; |
| unsigned char WFD_OUI23A[] = {0x50, 0x6F, 0x9A, 0x0A}; |
| |
| unsigned char WMM_INFO_OUI23A[] = {0x00, 0x50, 0xf2, 0x02, 0x00, 0x01}; |
| unsigned char WMM_PARA_OUI23A[] = {0x00, 0x50, 0xf2, 0x02, 0x01, 0x01}; |
| |
| unsigned char WPA_TKIP_CIPHER23A[4] = {0x00, 0x50, 0xf2, 0x02}; |
| unsigned char RSN_TKIP_CIPHER23A[4] = {0x00, 0x0f, 0xac, 0x02}; |
| |
| |
| /******************************************************** |
| MCS rate definitions |
| *********************************************************/ |
| unsigned char MCS_rate_2R23A[16] = { |
| 0xff, 0xff, 0x0, 0x0, 0x01, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0}; |
| unsigned char MCS_rate_1R23A[16] = { |
| 0xff, 0x00, 0x0, 0x0, 0x01, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0}; |
| |
| /******************************************************** |
| ChannelPlan definitions |
| *********************************************************/ |
| |
| static struct rt_channel_plan_2g RTW_ChannelPlan2G[RT_CHANNEL_DOMAIN_2G_MAX] = { |
| {{1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13}, 13}, /* 0x00, RT_CHANNEL_DOMAIN_2G_WORLD , Passive scan CH 12, 13 */ |
| {{1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13}, 13}, /* 0x01, RT_CHANNEL_DOMAIN_2G_ETSI1 */ |
| {{1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11}, 11}, /* 0x02, RT_CHANNEL_DOMAIN_2G_FCC1 */ |
| {{1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14}, 14}, /* 0x03, RT_CHANNEL_DOMAIN_2G_MIKK1 */ |
| {{10, 11, 12, 13}, 4}, /* 0x04, RT_CHANNEL_DOMAIN_2G_ETSI2 */ |
| {{}, 0}, /* 0x05, RT_CHANNEL_DOMAIN_2G_NULL */ |
| }; |
| |
| static struct rt_channel_plan_5g RTW_ChannelPlan5G[RT_CHANNEL_DOMAIN_5G_MAX] = { |
| {{}, 0}, /* 0x00, RT_CHANNEL_DOMAIN_5G_NULL */ |
| {{36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140}, 19}, /* 0x01, RT_CHANNEL_DOMAIN_5G_ETSI1 */ |
| {{36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140, 149, 153, 157, 161, 165}, 24}, /* 0x02, RT_CHANNEL_DOMAIN_5G_ETSI2 */ |
| {{36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 120, 124, 128, 132, 149, 153, 157, 161, 165}, 22}, /* 0x03, RT_CHANNEL_DOMAIN_5G_ETSI3 */ |
| {{36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140, 149, 153, 157, 161, 165}, 24}, /* 0x04, RT_CHANNEL_DOMAIN_5G_FCC1 */ |
| {{36, 40, 44, 48, 149, 153, 157, 161, 165}, 9}, /* 0x05, RT_CHANNEL_DOMAIN_5G_FCC2 */ |
| {{36, 40, 44, 48, 52, 56, 60, 64, 149, 153, 157, 161, 165}, 13}, /* 0x06, RT_CHANNEL_DOMAIN_5G_FCC3 */ |
| {{36, 40, 44, 48, 52, 56, 60, 64, 149, 153, 157, 161}, 12}, /* 0x07, RT_CHANNEL_DOMAIN_5G_FCC4 */ |
| {{149, 153, 157, 161, 165}, 5}, /* 0x08, RT_CHANNEL_DOMAIN_5G_FCC5 */ |
| {{36, 40, 44, 48, 52, 56, 60, 64}, 8}, /* 0x09, RT_CHANNEL_DOMAIN_5G_FCC6 */ |
| {{36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 136, 140, 149, 153, 157, 161, 165}, 20}, /* 0x0A, RT_CHANNEL_DOMAIN_5G_FCC7_IC1 */ |
| {{36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 120, 124, 149, 153, 157, 161, 165}, 20}, /* 0x0B, RT_CHANNEL_DOMAIN_5G_KCC1 */ |
| {{36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140}, 19}, /* 0x0C, RT_CHANNEL_DOMAIN_5G_MKK1 */ |
| {{36, 40, 44, 48, 52, 56, 60, 64}, 8}, /* 0x0D, RT_CHANNEL_DOMAIN_5G_MKK2 */ |
| {{100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140}, 11}, /* 0x0E, RT_CHANNEL_DOMAIN_5G_MKK3 */ |
| {{56, 60, 64, 100, 104, 108, 112, 116, 136, 140, 149, 153, 157, 161, 165}, 15}, /* 0x0F, RT_CHANNEL_DOMAIN_5G_NCC1 */ |
| {{56, 60, 64, 149, 153, 157, 161, 165}, 8}, /* 0x10, RT_CHANNEL_DOMAIN_5G_NCC2 */ |
| |
| /* Driver self defined for old channel plan Compatible , Remember to modify if have new channel plan definition ===== */ |
| {{36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 132, 136, 140, 149, 153, 157, 161, 165}, 21}, /* 0x11, RT_CHANNEL_DOMAIN_5G_FCC */ |
| {{36, 40, 44, 48}, 4}, /* 0x12, RT_CHANNEL_DOMAIN_5G_JAPAN_NO_DFS */ |
| {{36, 40, 44, 48, 149, 153, 157, 161}, 8}, /* 0x13, RT_CHANNEL_DOMAIN_5G_FCC4_NO_DFS */ |
| }; |
| |
| static struct rt_channel_plan_map RTW_ChannelPlanMap[RT_CHANNEL_DOMAIN_MAX] = { |
| /* 0x00 ~ 0x1F , Old Define ===== */ |
| {0x02, 0x11}, /* 0x00, RT_CHANNEL_DOMAIN_FCC */ |
| {0x02, 0x0A}, /* 0x01, RT_CHANNEL_DOMAIN_IC */ |
| {0x01, 0x01}, /* 0x02, RT_CHANNEL_DOMAIN_ETSI */ |
| {0x01, 0x00}, /* 0x03, RT_CHANNEL_DOMAIN_SPAIN */ |
| {0x01, 0x00}, /* 0x04, RT_CHANNEL_DOMAIN_FRANCE */ |
| {0x03, 0x00}, /* 0x05, RT_CHANNEL_DOMAIN_MKK */ |
| {0x03, 0x00}, /* 0x06, RT_CHANNEL_DOMAIN_MKK1 */ |
| {0x01, 0x09}, /* 0x07, RT_CHANNEL_DOMAIN_ISRAEL */ |
| {0x03, 0x09}, /* 0x08, RT_CHANNEL_DOMAIN_TELEC */ |
| {0x03, 0x00}, /* 0x09, RT_CHANNEL_DOMAIN_GLOBAL_DOAMIN */ |
| {0x00, 0x00}, /* 0x0A, RT_CHANNEL_DOMAIN_WORLD_WIDE_13 */ |
| {0x02, 0x0F}, /* 0x0B, RT_CHANNEL_DOMAIN_TAIWAN */ |
| {0x01, 0x08}, /* 0x0C, RT_CHANNEL_DOMAIN_CHINA */ |
| {0x02, 0x06}, /* 0x0D, RT_CHANNEL_DOMAIN_SINGAPORE_INDIA_MEXICO */ |
| {0x02, 0x0B}, /* 0x0E, RT_CHANNEL_DOMAIN_KOREA */ |
| {0x02, 0x09}, /* 0x0F, RT_CHANNEL_DOMAIN_TURKEY */ |
| {0x01, 0x01}, /* 0x10, RT_CHANNEL_DOMAIN_JAPAN */ |
| {0x02, 0x05}, /* 0x11, RT_CHANNEL_DOMAIN_FCC_NO_DFS */ |
| {0x01, 0x12}, /* 0x12, RT_CHANNEL_DOMAIN_JAPAN_NO_DFS */ |
| {0x00, 0x04}, /* 0x13, RT_CHANNEL_DOMAIN_WORLD_WIDE_5G */ |
| {0x02, 0x10}, /* 0x14, RT_CHANNEL_DOMAIN_TAIWAN_NO_DFS */ |
| {0x00, 0x12}, /* 0x15, RT_CHANNEL_DOMAIN_ETSI_NO_DFS */ |
| {0x00, 0x13}, /* 0x16, RT_CHANNEL_DOMAIN_KOREA_NO_DFS */ |
| {0x03, 0x12}, /* 0x17, RT_CHANNEL_DOMAIN_JAPAN_NO_DFS */ |
| {0x05, 0x08}, /* 0x18, RT_CHANNEL_DOMAIN_PAKISTAN_NO_DFS */ |
| {0x02, 0x08}, /* 0x19, RT_CHANNEL_DOMAIN_TAIWAN2_NO_DFS */ |
| {0x00, 0x00}, /* 0x1A, */ |
| {0x00, 0x00}, /* 0x1B, */ |
| {0x00, 0x00}, /* 0x1C, */ |
| {0x00, 0x00}, /* 0x1D, */ |
| {0x00, 0x00}, /* 0x1E, */ |
| {0x05, 0x04}, /* 0x1F, RT_CHANNEL_DOMAIN_WORLD_WIDE_ONLY_5G */ |
| /* 0x20 ~ 0x7F , New Define ===== */ |
| {0x00, 0x00}, /* 0x20, RT_CHANNEL_DOMAIN_WORLD_NULL */ |
| {0x01, 0x00}, /* 0x21, RT_CHANNEL_DOMAIN_ETSI1_NULL */ |
| {0x02, 0x00}, /* 0x22, RT_CHANNEL_DOMAIN_FCC1_NULL */ |
| {0x03, 0x00}, /* 0x23, RT_CHANNEL_DOMAIN_MKK1_NULL */ |
| {0x04, 0x00}, /* 0x24, RT_CHANNEL_DOMAIN_ETSI2_NULL */ |
| {0x02, 0x04}, /* 0x25, RT_CHANNEL_DOMAIN_FCC1_FCC1 */ |
| {0x00, 0x01}, /* 0x26, RT_CHANNEL_DOMAIN_WORLD_ETSI1 */ |
| {0x03, 0x0C}, /* 0x27, RT_CHANNEL_DOMAIN_MKK1_MKK1 */ |
| {0x00, 0x0B}, /* 0x28, RT_CHANNEL_DOMAIN_WORLD_KCC1 */ |
| {0x00, 0x05}, /* 0x29, RT_CHANNEL_DOMAIN_WORLD_FCC2 */ |
| {0x00, 0x00}, /* 0x2A, */ |
| {0x00, 0x00}, /* 0x2B, */ |
| {0x00, 0x00}, /* 0x2C, */ |
| {0x00, 0x00}, /* 0x2D, */ |
| {0x00, 0x00}, /* 0x2E, */ |
| {0x00, 0x00}, /* 0x2F, */ |
| {0x00, 0x06}, /* 0x30, RT_CHANNEL_DOMAIN_WORLD_FCC3 */ |
| {0x00, 0x07}, /* 0x31, RT_CHANNEL_DOMAIN_WORLD_FCC4 */ |
| {0x00, 0x08}, /* 0x32, RT_CHANNEL_DOMAIN_WORLD_FCC5 */ |
| {0x00, 0x09}, /* 0x33, RT_CHANNEL_DOMAIN_WORLD_FCC6 */ |
| {0x02, 0x0A}, /* 0x34, RT_CHANNEL_DOMAIN_FCC1_FCC7 */ |
| {0x00, 0x02}, /* 0x35, RT_CHANNEL_DOMAIN_WORLD_ETSI2 */ |
| {0x00, 0x03}, /* 0x36, RT_CHANNEL_DOMAIN_WORLD_ETSI3 */ |
| {0x03, 0x0D}, /* 0x37, RT_CHANNEL_DOMAIN_MKK1_MKK2 */ |
| {0x03, 0x0E}, /* 0x38, RT_CHANNEL_DOMAIN_MKK1_MKK3 */ |
| {0x02, 0x0F}, /* 0x39, RT_CHANNEL_DOMAIN_FCC1_NCC1 */ |
| {0x00, 0x00}, /* 0x3A, */ |
| {0x00, 0x00}, /* 0x3B, */ |
| {0x00, 0x00}, /* 0x3C, */ |
| {0x00, 0x00}, /* 0x3D, */ |
| {0x00, 0x00}, /* 0x3E, */ |
| {0x00, 0x00}, /* 0x3F, */ |
| {0x02, 0x10}, /* 0x40, RT_CHANNEL_DOMAIN_FCC1_NCC2 */ |
| {0x03, 0x00}, /* 0x41, RT_CHANNEL_DOMAIN_GLOBAL_DOAMIN_2G */ |
| }; |
| |
| static struct rt_channel_plan_map RTW_CHANNEL_PLAN_MAP_REALTEK_DEFINE = {0x03, 0x02}; /* use the conbination for max channel numbers */ |
| |
| static struct fwevent wlanevents[] = |
| { |
| {0, rtw_dummy_event_callback23a}, /*0*/ |
| {0, NULL}, |
| {0, NULL}, |
| {0, NULL}, |
| {0, NULL}, |
| {0, NULL}, |
| {0, NULL}, |
| {0, NULL}, |
| {0, &rtw_survey_event_cb23a}, /*8*/ |
| {sizeof (struct surveydone_event), &rtw_surveydone_event_callback23a}, /*9*/ |
| |
| {0, &rtw23a_joinbss_event_cb}, /*10*/ |
| {sizeof(struct stassoc_event), &rtw_stassoc_event_callback23a}, |
| {sizeof(struct stadel_event), &rtw_stadel_event_callback23a}, |
| {0, &rtw_atimdone_event_callback23a}, |
| {0, rtw_dummy_event_callback23a}, |
| {0, NULL}, /*15*/ |
| {0, NULL}, |
| {0, NULL}, |
| {0, NULL}, |
| {0, rtw23a_fwdbg_event_callback}, |
| {0, NULL}, /*20*/ |
| {0, NULL}, |
| {0, NULL}, |
| {0, &rtw_cpwm_event_callback23a}, |
| {0, NULL}, |
| }; |
| |
| |
| /* |
| * Search the @param channel_num in given @param channel_set |
| * @ch_set: the given channel set |
| * @ch: the given channel number |
| * |
| * return the index of channel_num in channel_set, -1 if not found |
| */ |
| int rtw_ch_set_search_ch23a(struct rt_channel_info *ch_set, const u32 ch) |
| { |
| int i; |
| for (i = 0; ch_set[i]. ChannelNum != 0; i++) { |
| if (ch == ch_set[i].ChannelNum) |
| break; |
| } |
| |
| if (i >= ch_set[i].ChannelNum) |
| return -1; |
| return i; |
| } |
| |
| /**************************************************************************** |
| |
| Following are the initialization functions for WiFi MLME |
| |
| *****************************************************************************/ |
| |
| int init_hw_mlme_ext23a(struct rtw_adapter *padapter) |
| { |
| struct mlme_ext_priv *pmlmeext = &padapter->mlmeextpriv; |
| |
| set_channel_bwmode23a(padapter, pmlmeext->cur_channel, |
| pmlmeext->cur_ch_offset, pmlmeext->cur_bwmode); |
| return _SUCCESS; |
| } |
| |
| static void init_mlme_ext_priv23a_value(struct rtw_adapter* padapter) |
| { |
| struct mlme_ext_priv *pmlmeext = &padapter->mlmeextpriv; |
| struct mlme_ext_info *pmlmeinfo = &pmlmeext->mlmext_info; |
| unsigned char mixed_datarate[NumRates] = { |
| _1M_RATE_, _2M_RATE_, _5M_RATE_, _11M_RATE_, _6M_RATE_, |
| _9M_RATE_, _12M_RATE_, _18M_RATE_, _24M_RATE_, _36M_RATE_, |
| _48M_RATE_, _54M_RATE_, 0xff}; |
| unsigned char mixed_basicrate[NumRates] = { |
| _1M_RATE_, _2M_RATE_, _5M_RATE_, _11M_RATE_, _6M_RATE_, |
| _12M_RATE_, _24M_RATE_, 0xff,}; |
| |
| atomic_set(&pmlmeext->event_seq, 0); |
| /* reset to zero when disconnect at client mode */ |
| pmlmeext->mgnt_seq = 0; |
| |
| pmlmeext->cur_channel = padapter->registrypriv.channel; |
| pmlmeext->cur_bwmode = HT_CHANNEL_WIDTH_20; |
| pmlmeext->cur_ch_offset = HAL_PRIME_CHNL_OFFSET_DONT_CARE; |
| |
| pmlmeext->retry = 0; |
| |
| pmlmeext->cur_wireless_mode = padapter->registrypriv.wireless_mode; |
| |
| memcpy(pmlmeext->datarate, mixed_datarate, NumRates); |
| memcpy(pmlmeext->basicrate, mixed_basicrate, NumRates); |
| |
| if (pmlmeext->cur_channel > 14) |
| pmlmeext->tx_rate = IEEE80211_OFDM_RATE_6MB; |
| else |
| pmlmeext->tx_rate = IEEE80211_CCK_RATE_1MB; |
| |
| pmlmeext->sitesurvey_res.state = SCAN_DISABLE; |
| pmlmeext->sitesurvey_res.channel_idx = 0; |
| pmlmeext->sitesurvey_res.bss_cnt = 0; |
| pmlmeext->scan_abort = false; |
| |
| pmlmeinfo->state = WIFI_FW_NULL_STATE; |
| pmlmeinfo->reauth_count = 0; |
| pmlmeinfo->reassoc_count = 0; |
| pmlmeinfo->link_count = 0; |
| pmlmeinfo->auth_seq = 0; |
| pmlmeinfo->auth_algo = dot11AuthAlgrthm_Open; |
| pmlmeinfo->key_index = 0; |
| pmlmeinfo->iv = 0; |
| |
| pmlmeinfo->enc_algo = _NO_PRIVACY_; |
| pmlmeinfo->authModeToggle = 0; |
| |
| memset(pmlmeinfo->chg_txt, 0, 128); |
| |
| pmlmeinfo->slotTime = SHORT_SLOT_TIME; |
| pmlmeinfo->preamble_mode = PREAMBLE_AUTO; |
| |
| pmlmeinfo->dialogToken = 0; |
| |
| pmlmeext->action_public_rxseq = 0xffff; |
| pmlmeext->action_public_dialog_token = 0xff; |
| } |
| |
| static int has_channel(struct rt_channel_info *channel_set, |
| u8 chanset_size, u8 chan) { |
| int i; |
| |
| for (i = 0; i < chanset_size; i++) { |
| if (channel_set[i].ChannelNum == chan) |
| return 1; |
| } |
| |
| return 0; |
| } |
| |
| static void init_channel_list(struct rtw_adapter *padapter, |
| struct rt_channel_info *channel_set, |
| u8 chanset_size, |
| struct p2p_channels *channel_list) { |
| |
| struct p2p_oper_class_map op_class[] = { |
| { IEEE80211G, 81, 1, 13, 1, BW20 }, |
| { IEEE80211G, 82, 14, 14, 1, BW20 }, |
| { IEEE80211A, 115, 36, 48, 4, BW20 }, |
| { IEEE80211A, 116, 36, 44, 8, BW40PLUS }, |
| { IEEE80211A, 117, 40, 48, 8, BW40MINUS }, |
| { IEEE80211A, 124, 149, 161, 4, BW20 }, |
| { IEEE80211A, 125, 149, 169, 4, BW20 }, |
| { IEEE80211A, 126, 149, 157, 8, BW40PLUS }, |
| { IEEE80211A, 127, 153, 161, 8, BW40MINUS }, |
| { -1, 0, 0, 0, 0, BW20 } |
| }; |
| |
| int cla, op; |
| |
| cla = 0; |
| |
| for (op = 0; op_class[op].op_class; op++) { |
| u8 ch; |
| struct p2p_oper_class_map *o = &op_class[op]; |
| struct p2p_reg_class *reg = NULL; |
| |
| for (ch = o->min_chan; ch <= o->max_chan; ch += o->inc) { |
| if (!has_channel(channel_set, chanset_size, ch)) |
| continue; |
| |
| if ((0 == padapter->registrypriv.ht_enable) && |
| (o->inc == 8)) |
| continue; |
| |
| if ((0 == (padapter->registrypriv.cbw40_enable & BIT(1))) && |
| ((BW40MINUS == o->bw) || (BW40PLUS == o->bw))) |
| continue; |
| |
| if (reg == NULL) { |
| reg = &channel_list->reg_class[cla]; |
| cla++; |
| reg->reg_class = o->op_class; |
| reg->channels = 0; |
| } |
| reg->channel[reg->channels] = ch; |
| reg->channels++; |
| } |
| } |
| channel_list->reg_classes = cla; |
| } |
| |
| static u8 init_channel_set(struct rtw_adapter* padapter, u8 ChannelPlan, |
| struct rt_channel_info *channel_set) |
| { |
| u8 index, chanset_size = 0; |
| u8 b5GBand = false, b2_4GBand = false; |
| u8 Index2G = 0, Index5G = 0; |
| |
| memset(channel_set, 0, sizeof(struct rt_channel_info)*MAX_CHANNEL_NUM); |
| |
| if (ChannelPlan >= RT_CHANNEL_DOMAIN_MAX && |
| ChannelPlan != RT_CHANNEL_DOMAIN_REALTEK_DEFINE) { |
| DBG_8723A("ChannelPlan ID %x error !!!!!\n", ChannelPlan); |
| return chanset_size; |
| } |
| |
| if (padapter->registrypriv.wireless_mode & WIRELESS_11G) { |
| b2_4GBand = true; |
| if (RT_CHANNEL_DOMAIN_REALTEK_DEFINE == ChannelPlan) |
| Index2G = RTW_CHANNEL_PLAN_MAP_REALTEK_DEFINE.Index2G; |
| else |
| Index2G = RTW_ChannelPlanMap[ChannelPlan].Index2G; |
| } |
| |
| if (padapter->registrypriv.wireless_mode & WIRELESS_11A) { |
| b5GBand = true; |
| if (RT_CHANNEL_DOMAIN_REALTEK_DEFINE == ChannelPlan) |
| Index5G = RTW_CHANNEL_PLAN_MAP_REALTEK_DEFINE.Index5G; |
| else |
| Index5G = RTW_ChannelPlanMap[ChannelPlan].Index5G; |
| } |
| |
| if (b2_4GBand) { |
| for (index = 0; index<RTW_ChannelPlan2G[Index2G].Len; index++) { |
| channel_set[chanset_size].ChannelNum = |
| RTW_ChannelPlan2G[Index2G].Channel[index]; |
| |
| if ((RT_CHANNEL_DOMAIN_GLOBAL_DOAMIN == ChannelPlan) || |
| /* Channel 1~11 is active, and 12~14 is passive */ |
| (RT_CHANNEL_DOMAIN_GLOBAL_DOAMIN_2G == ChannelPlan)){ |
| if (channel_set[chanset_size].ChannelNum >= 1 && |
| channel_set[chanset_size].ChannelNum <= 11) |
| channel_set[chanset_size].ScanType = |
| SCAN_ACTIVE; |
| else if ((channel_set[chanset_size].ChannelNum >= 12 && |
| channel_set[chanset_size].ChannelNum <= 14)) |
| channel_set[chanset_size].ScanType = |
| SCAN_PASSIVE; |
| } else if (RT_CHANNEL_DOMAIN_WORLD_WIDE_13 == |
| ChannelPlan || |
| RT_CHANNEL_DOMAIN_WORLD_WIDE_5G == |
| ChannelPlan || |
| RT_CHANNEL_DOMAIN_2G_WORLD == Index2G) { |
| /* channel 12~13, passive scan */ |
| if (channel_set[chanset_size].ChannelNum <= 11) |
| channel_set[chanset_size].ScanType = |
| SCAN_ACTIVE; |
| else |
| channel_set[chanset_size].ScanType = |
| SCAN_PASSIVE; |
| } else |
| channel_set[chanset_size].ScanType = |
| SCAN_ACTIVE; |
| |
| chanset_size++; |
| } |
| } |
| |
| if (b5GBand) { |
| for (index = 0;index<RTW_ChannelPlan5G[Index5G].Len;index++) { |
| if (RTW_ChannelPlan5G[Index5G].Channel[index] <= 48 || |
| RTW_ChannelPlan5G[Index5G].Channel[index] >= 149) { |
| channel_set[chanset_size].ChannelNum = |
| RTW_ChannelPlan5G[Index5G].Channel[index]; |
| if (RT_CHANNEL_DOMAIN_WORLD_WIDE_5G == |
| ChannelPlan) { |
| /* passive scan for all 5G channels */ |
| channel_set[chanset_size].ScanType = |
| SCAN_PASSIVE; |
| } else |
| channel_set[chanset_size].ScanType = |
| SCAN_ACTIVE; |
| DBG_8723A("%s(): channel_set[%d].ChannelNum = " |
| "%d\n", __func__, chanset_size, |
| channel_set[chanset_size].ChannelNum); |
| chanset_size++; |
| } |
| } |
| } |
| |
| return chanset_size; |
| } |
| |
| int init_mlme_ext_priv23a(struct rtw_adapter* padapter) |
| { |
| int res = _SUCCESS; |
| struct registry_priv* pregistrypriv = &padapter->registrypriv; |
| struct mlme_ext_priv *pmlmeext = &padapter->mlmeextpriv; |
| struct mlme_priv *pmlmepriv = &padapter->mlmepriv; |
| struct mlme_ext_info *pmlmeinfo = &pmlmeext->mlmext_info; |
| |
| pmlmeext->padapter = padapter; |
| |
| init_mlme_ext_priv23a_value(padapter); |
| pmlmeinfo->bAcceptAddbaReq = pregistrypriv->bAcceptAddbaReq; |
| |
| init_mlme_ext_timer23a(padapter); |
| |
| #ifdef CONFIG_8723AU_AP_MODE |
| init_mlme_ap_info23a(padapter); |
| #endif |
| |
| pmlmeext->max_chan_nums = init_channel_set(padapter, |
| pmlmepriv->ChannelPlan, |
| pmlmeext->channel_set); |
| init_channel_list(padapter, pmlmeext->channel_set, |
| pmlmeext->max_chan_nums, &pmlmeext->channel_list); |
| |
| pmlmeext->chan_scan_time = SURVEY_TO; |
| pmlmeext->mlmeext_init = true; |
| |
| pmlmeext->active_keep_alive_check = true; |
| return res; |
| } |
| |
| void free_mlme_ext_priv23a (struct mlme_ext_priv *pmlmeext) |
| { |
| struct rtw_adapter *padapter = pmlmeext->padapter; |
| |
| if (!padapter) |
| return; |
| |
| if (padapter->bDriverStopped == true) { |
| del_timer_sync(&pmlmeext->survey_timer); |
| del_timer_sync(&pmlmeext->link_timer); |
| /* del_timer_sync(&pmlmeext->ADDBA_timer); */ |
| } |
| } |
| |
| static void |
| _mgt_dispatcher23a(struct rtw_adapter *padapter, struct mlme_handler *ptable, |
| struct recv_frame *precv_frame) |
| { |
| struct sk_buff *skb = precv_frame->pkt; |
| struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data; |
| |
| if (ptable->func) { |
| /* receive the frames that ra(a1) is my address |
| or ra(a1) is bc address. */ |
| if (!ether_addr_equal(hdr->addr1, myid(&padapter->eeprompriv))&& |
| !is_broadcast_ether_addr(hdr->addr1)) |
| return; |
| |
| ptable->func(padapter, precv_frame); |
| } |
| } |
| |
| void mgt_dispatcher23a(struct rtw_adapter *padapter, |
| struct recv_frame *precv_frame) |
| { |
| int index; |
| struct mlme_handler *ptable; |
| #ifdef CONFIG_8723AU_AP_MODE |
| struct mlme_priv *pmlmepriv = &padapter->mlmepriv; |
| #endif /* CONFIG_8723AU_AP_MODE */ |
| struct sk_buff *skb = precv_frame->pkt; |
| struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data; |
| u16 stype; |
| struct sta_info *psta; |
| |
| if (!ieee80211_is_mgmt(hdr->frame_control)) |
| return; |
| |
| /* receive the frames that ra(a1) is my address or ra(a1) is |
| bc address. */ |
| if (!ether_addr_equal(hdr->addr1, myid(&padapter->eeprompriv)) && |
| !is_broadcast_ether_addr(hdr->addr1)) |
| return; |
| |
| ptable = mlme_sta_tbl; |
| |
| stype = le16_to_cpu(hdr->frame_control) & IEEE80211_FCTL_STYPE; |
| index = stype >> 4; |
| |
| if (index > 13) { |
| RT_TRACE(_module_rtl871x_mlme_c_, _drv_err_, |
| ("Currently we do not support reserved sub-fr-type =" |
| "%d\n", index)); |
| return; |
| } |
| ptable += index; |
| |
| psta = rtw_get_stainfo23a(&padapter->stapriv, hdr->addr2); |
| |
| if (psta) { |
| if (ieee80211_has_retry(hdr->frame_control)) { |
| if (precv_frame->attrib.seq_num == |
| psta->RxMgmtFrameSeqNum) { |
| /* drop the duplicate management frame */ |
| DBG_8723A("Drop duplicate management frame " |
| "with seq_num = %d.\n", |
| precv_frame->attrib.seq_num); |
| return; |
| } |
| } |
| psta->RxMgmtFrameSeqNum = precv_frame->attrib.seq_num; |
| } |
| |
| #ifdef CONFIG_8723AU_AP_MODE |
| switch (stype) |
| { |
| case IEEE80211_STYPE_AUTH: |
| if (check_fwstate(pmlmepriv, WIFI_AP_STATE) == true) |
| ptable->func = &OnAuth23a; |
| else |
| ptable->func = &OnAuth23aClient23a; |
| /* pass through */ |
| case IEEE80211_STYPE_ASSOC_REQ: |
| case IEEE80211_STYPE_REASSOC_REQ: |
| _mgt_dispatcher23a(padapter, ptable, precv_frame); |
| break; |
| case IEEE80211_STYPE_PROBE_REQ: |
| if (check_fwstate(pmlmepriv, WIFI_AP_STATE) == true) |
| _mgt_dispatcher23a(padapter, ptable, precv_frame); |
| else |
| _mgt_dispatcher23a(padapter, ptable, precv_frame); |
| break; |
| case IEEE80211_STYPE_BEACON: |
| _mgt_dispatcher23a(padapter, ptable, precv_frame); |
| break; |
| case IEEE80211_STYPE_ACTION: |
| /* if (check_fwstate(pmlmepriv, WIFI_AP_STATE) == true) */ |
| _mgt_dispatcher23a(padapter, ptable, precv_frame); |
| break; |
| default: |
| _mgt_dispatcher23a(padapter, ptable, precv_frame); |
| if (check_fwstate(pmlmepriv, WIFI_AP_STATE) == true) |
| rtw_hostapd_mlme_rx23a(padapter, precv_frame); |
| break; |
| } |
| #else |
| _mgt_dispatcher23a(padapter, ptable, precv_frame); |
| #endif |
| } |
| |
| #ifdef CONFIG_8723AU_P2P |
| static u32 p2p_listen_state_process(struct rtw_adapter *padapter, |
| unsigned char *da) |
| { |
| bool response = true; |
| |
| if (wdev_to_priv(padapter->rtw_wdev)->p2p_enabled == false || |
| padapter->mlmepriv.wps_probe_resp_ie == NULL || |
| padapter->mlmepriv.p2p_probe_resp_ie == NULL) { |
| DBG_8723A("DON'T issue_probersp23a_p2p23a: p2p_enabled:%d, " |
| "wps_probe_resp_ie:%p, p2p_probe_resp_ie:%p\n", |
| wdev_to_priv(padapter->rtw_wdev)->p2p_enabled, |
| padapter->mlmepriv.wps_probe_resp_ie, |
| padapter->mlmepriv.p2p_probe_resp_ie); |
| response = false; |
| } |
| |
| if (response == true) |
| issue_probersp23a_p2p23a(padapter, da); |
| |
| return _SUCCESS; |
| } |
| #endif /* CONFIG_8723AU_P2P */ |
| |
| /**************************************************************************** |
| |
| Following are the callback functions for each subtype of the management frames |
| |
| *****************************************************************************/ |
| |
| unsigned int OnProbeReq23a(struct rtw_adapter *padapter, |
| struct recv_frame *precv_frame) |
| { |
| unsigned int ielen; |
| unsigned char *p; |
| struct mlme_priv *pmlmepriv = &padapter->mlmepriv; |
| struct mlme_ext_priv *pmlmeext = &padapter->mlmeextpriv; |
| struct mlme_ext_info *pmlmeinfo = &pmlmeext->mlmext_info; |
| struct wlan_bssid_ex *cur = &pmlmeinfo->network; |
| struct sk_buff *skb = precv_frame->pkt; |
| struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data; |
| u8 *pframe = skb->data; |
| uint len = skb->len; |
| u8 is_valid_p2p_probereq = false; |
| |
| #ifdef CONFIG_8723AU_P2P |
| struct wifidirect_info *pwdinfo = &padapter->wdinfo; |
| u8 wifi_test_chk_rate = 1; |
| |
| if (!rtw_p2p_chk_state(pwdinfo, P2P_STATE_NONE) && |
| !rtw_p2p_chk_state(pwdinfo, P2P_STATE_IDLE) && |
| !rtw_p2p_chk_role(pwdinfo, P2P_ROLE_CLIENT) && |
| !rtw_p2p_chk_state(pwdinfo, P2P_STATE_FIND_PHASE_SEARCH) && |
| !rtw_p2p_chk_state(pwdinfo, P2P_STATE_SCAN)) { |
| /* mcs_rate = 0 -> CCK 1M rate */ |
| /* mcs_rate = 1 -> CCK 2M rate */ |
| /* mcs_rate = 2 -> CCK 5.5M rate */ |
| /* mcs_rate = 3 -> CCK 11M rate */ |
| /* In the P2P mode, the driver should not support |
| the CCK rate */ |
| |
| /* IOT issue: Google Nexus7 use 1M rate to send |
| p2p_probe_req after GO nego completed and Nexus7 |
| is client */ |
| if (wifi_test_chk_rate == 1) { |
| if ((is_valid_p2p_probereq = |
| process_probe_req_p2p_ie23a(pwdinfo, pframe, |
| len)) == true) { |
| if (rtw_p2p_chk_role(pwdinfo, |
| P2P_ROLE_DEVICE)) { |
| u8 *sa = ieee80211_get_SA(hdr); |
| p2p_listen_state_process(padapter, sa); |
| return _SUCCESS; |
| } |
| |
| if (rtw_p2p_chk_role(pwdinfo, P2P_ROLE_GO)) { |
| goto _continue; |
| } |
| } |
| } |
| } |
| |
| _continue: |
| #endif /* CONFIG_8723AU_P2P */ |
| |
| if (check_fwstate(pmlmepriv, WIFI_STATION_STATE)) { |
| return _SUCCESS; |
| } |
| |
| if (check_fwstate(pmlmepriv, _FW_LINKED) == false && |
| check_fwstate(pmlmepriv, |
| WIFI_ADHOC_MASTER_STATE|WIFI_AP_STATE) == false) { |
| return _SUCCESS; |
| } |
| |
| p = rtw_get_ie23a(pframe + sizeof(struct ieee80211_hdr_3addr) + |
| _PROBEREQ_IE_OFFSET_, _SSID_IE_, (int *)&ielen, |
| len - sizeof(struct ieee80211_hdr_3addr) - |
| _PROBEREQ_IE_OFFSET_); |
| |
| /* check (wildcard) SSID */ |
| if (p) { |
| if (is_valid_p2p_probereq == true) { |
| goto _issue_probersp23a; |
| } |
| |
| if ((ielen != 0 && |
| memcmp((void *)(p+2), cur->Ssid.ssid, |
| cur->Ssid.ssid_len)) || |
| (ielen == 0 && pmlmeinfo->hidden_ssid_mode)) { |
| return _SUCCESS; |
| } |
| |
| _issue_probersp23a: |
| |
| if (check_fwstate(pmlmepriv, _FW_LINKED) == true && |
| pmlmepriv->cur_network.join_res == true) { |
| /* DBG_8723A("+issue_probersp23a during ap mode\n"); */ |
| issue_probersp23a(padapter, ieee80211_get_SA(hdr), |
| is_valid_p2p_probereq); |
| } |
| } |
| |
| return _SUCCESS; |
| } |
| |
| unsigned int OnProbeRsp23a(struct rtw_adapter *padapter, |
| struct recv_frame *precv_frame) |
| { |
| struct mlme_ext_priv *pmlmeext = &padapter->mlmeextpriv; |
| #ifdef CONFIG_8723AU_P2P |
| struct sk_buff *skb = precv_frame->pkt; |
| struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data; |
| struct wifidirect_info *pwdinfo = &padapter->wdinfo; |
| #endif |
| |
| #ifdef CONFIG_8723AU_P2P |
| if (rtw_p2p_chk_state(pwdinfo, P2P_STATE_TX_PROVISION_DIS_REQ)) { |
| if (pwdinfo->tx_prov_disc_info.benable == true) { |
| if (ether_addr_equal(pwdinfo->tx_prov_disc_info.peerIFAddr, |
| hdr->addr2)) { |
| if (rtw_p2p_chk_role(pwdinfo, P2P_ROLE_CLIENT)) { |
| pwdinfo->tx_prov_disc_info.benable = false; |
| issue_p2p_provision_request23a(padapter, |
| pwdinfo->tx_prov_disc_info.ssid.ssid, |
| pwdinfo->tx_prov_disc_info.ssid.ssid_len, |
| pwdinfo->tx_prov_disc_info.peerDevAddr); |
| } |
| else if (rtw_p2p_chk_role(pwdinfo, P2P_ROLE_DEVICE) || rtw_p2p_chk_role(pwdinfo, P2P_ROLE_GO)) |
| { |
| pwdinfo->tx_prov_disc_info.benable = false; |
| issue_p2p_provision_request23a(padapter, |
| NULL, |
| 0, |
| pwdinfo->tx_prov_disc_info.peerDevAddr); |
| } |
| } |
| } |
| return _SUCCESS; |
| } else if (rtw_p2p_chk_state(pwdinfo, P2P_STATE_GONEGO_ING)) { |
| if (pwdinfo->nego_req_info.benable == true) { |
| DBG_8723A("[%s] P2P State is GONEGO ING!\n", __func__); |
| if (ether_addr_equal(pwdinfo->nego_req_info.peerDevAddr, |
| hdr->addr2)) { |
| pwdinfo->nego_req_info.benable = false; |
| issue_p2p_GO_request23a(padapter, pwdinfo->nego_req_info.peerDevAddr); |
| } |
| } |
| } else if (rtw_p2p_chk_state(pwdinfo, P2P_STATE_TX_INVITE_REQ)) { |
| if (pwdinfo->invitereq_info.benable == true) { |
| DBG_8723A("[%s] P2P_STATE_TX_INVITE_REQ!\n", __func__); |
| if (ether_addr_equal( |
| pwdinfo->invitereq_info.peer_macaddr, |
| hdr->addr2)) { |
| pwdinfo->invitereq_info.benable = false; |
| issue_p2p_invitation_request23a(padapter, pwdinfo->invitereq_info.peer_macaddr); |
| } |
| } |
| } |
| #endif |
| |
| if (pmlmeext->sitesurvey_res.state == SCAN_PROCESS) { |
| report_survey_event23a(padapter, precv_frame); |
| return _SUCCESS; |
| } |
| |
| return _SUCCESS; |
| } |
| |
| unsigned int OnBeacon23a(struct rtw_adapter *padapter, |
| struct recv_frame *precv_frame) |
| { |
| int cam_idx; |
| struct sta_info *psta; |
| struct mlme_ext_priv *pmlmeext = &padapter->mlmeextpriv; |
| struct mlme_ext_info *pmlmeinfo = &pmlmeext->mlmext_info; |
| struct mlme_priv *pmlmepriv = &padapter->mlmepriv; |
| struct sta_priv *pstapriv = &padapter->stapriv; |
| struct sk_buff *skb = precv_frame->pkt; |
| struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data; |
| u8 *pframe = skb->data; |
| uint len = skb->len; |
| struct wlan_bssid_ex *pbss; |
| int ret = _SUCCESS; |
| u8 *p = NULL; |
| u32 ielen = 0; |
| |
| p = rtw_get_ie23a(pframe + sizeof(struct ieee80211_hdr_3addr) + |
| _BEACON_IE_OFFSET_, _EXT_SUPPORTEDRATES_IE_, &ielen, |
| len - sizeof(struct ieee80211_hdr_3addr) - |
| _BEACON_IE_OFFSET_); |
| if ((p != NULL) && (ielen > 0)) { |
| if ((*(p + 1 + ielen) == 0x2D) && (*(p + 2 + ielen) != 0x2D)) { |
| /* Invalid value 0x2D is detected in Extended Supported |
| * Rates (ESR) IE. Try to fix the IE length to avoid |
| * failed Beacon parsing. |
| */ |
| DBG_8723A("[WIFIDBG] Error in ESR IE is detected in " |
| "Beacon of BSSID: %pM. Fix the length of " |
| "ESR IE to avoid failed Beacon parsing.\n", |
| hdr->addr3); |
| *(p + 1) = ielen - 1; |
| } |
| } |
| |
| if (pmlmeext->sitesurvey_res.state == SCAN_PROCESS) { |
| report_survey_event23a(padapter, precv_frame); |
| return _SUCCESS; |
| } |
| |
| if (ether_addr_equal(hdr->addr3, get_my_bssid23a(&pmlmeinfo->network))){ |
| if (pmlmeinfo->state & WIFI_FW_AUTH_NULL) { |
| /* we should update current network before auth, |
| or some IE is wrong */ |
| pbss = (struct wlan_bssid_ex *) |
| kmalloc(sizeof(struct wlan_bssid_ex), |
| GFP_ATOMIC); |
| if (pbss) { |
| if (collect_bss_info23a(padapter, precv_frame, |
| pbss) == _SUCCESS) { |
| update_network23a(&pmlmepriv->cur_network.network, pbss, padapter, true); |
| rtw_get_bcn_info23a(&pmlmepriv->cur_network); |
| } |
| kfree(pbss); |
| } |
| |
| /* check the vendor of the assoc AP */ |
| pmlmeinfo->assoc_AP_vendor = check_assoc_AP23a(pframe + sizeof(struct ieee80211_hdr_3addr), len-sizeof(struct ieee80211_hdr_3addr)); |
| |
| /* update TSF Value */ |
| update_TSF23a(pmlmeext, pframe, len); |
| |
| /* start auth */ |
| start_clnt_auth23a(padapter); |
| |
| return _SUCCESS; |
| } |
| |
| if (((pmlmeinfo->state&0x03) == WIFI_FW_STATION_STATE) && |
| (pmlmeinfo->state & WIFI_FW_ASSOC_SUCCESS)) { |
| psta = rtw_get_stainfo23a(pstapriv, hdr->addr2); |
| if (psta) { |
| ret = rtw_check_bcn_info23a(padapter, pframe, |
| len); |
| if (!ret) { |
| DBG_8723A_LEVEL(_drv_always_, |
| "ap has changed, " |
| "disconnect now\n"); |
| receive_disconnect23a(padapter, pmlmeinfo->network.MacAddress, 65535); |
| return _SUCCESS; |
| } |
| /* update WMM, ERP in the beacon */ |
| /* todo: the timer is used instead of |
| the number of the beacon received */ |
| if ((sta_rx_pkts(psta) & 0xf) == 0) { |
| /* DBG_8723A("update_bcn_info\n"); */ |
| update_beacon23a_info(padapter, pframe, |
| len, psta); |
| } |
| |
| #ifdef CONFIG_8723AU_P2P |
| process_p2p_ps_ie23a(padapter, (pframe + sizeof(struct ieee80211_hdr_3addr)), (len - sizeof(struct ieee80211_hdr_3addr))); |
| #endif /* CONFIG_8723AU_P2P */ |
| } |
| } else if ((pmlmeinfo->state&0x03) == WIFI_FW_ADHOC_STATE) { |
| psta = rtw_get_stainfo23a(pstapriv, hdr->addr2); |
| if (psta) { |
| /* update WMM, ERP in the beacon */ |
| /* todo: the timer is used instead of the |
| number of the beacon received */ |
| if ((sta_rx_pkts(psta) & 0xf) == 0) { |
| /* DBG_8723A("update_bcn_info\n"); */ |
| update_beacon23a_info(padapter, pframe, |
| len, psta); |
| } |
| } else { |
| /* allocate a new CAM entry for IBSS station */ |
| cam_idx = allocate_fw_sta_entry23a(padapter); |
| if (cam_idx == NUM_STA) |
| goto _END_ONBEACON_; |
| |
| /* get supported rate */ |
| if (update_sta_support_rate23a(padapter, (pframe + sizeof(struct ieee80211_hdr_3addr) + _BEACON_IE_OFFSET_), (len - sizeof(struct ieee80211_hdr_3addr) - _BEACON_IE_OFFSET_), cam_idx) == _FAIL) { |
| pmlmeinfo->FW_sta_info[cam_idx].status = 0; |
| goto _END_ONBEACON_; |
| } |
| |
| /* update TSF Value */ |
| update_TSF23a(pmlmeext, pframe, len); |
| |
| /* report sta add event */ |
| report_add_sta_event23a(padapter, hdr->addr2, |
| cam_idx); |
| } |
| } |
| } |
| |
| _END_ONBEACON_: |
| |
| return _SUCCESS; |
| } |
| |
| unsigned int OnAuth23a(struct rtw_adapter *padapter, |
| struct recv_frame *precv_frame) |
| { |
| #ifdef CONFIG_8723AU_AP_MODE |
| unsigned int auth_mode, seq, ie_len; |
| unsigned char *sa, *p; |
| u16 algorithm; |
| int status; |
| static struct sta_info stat; |
| struct sta_info *pstat = NULL; |
| struct sta_priv *pstapriv = &padapter->stapriv; |
| struct security_priv *psecuritypriv = &padapter->securitypriv; |
| struct mlme_ext_priv *pmlmeext = &padapter->mlmeextpriv; |
| struct mlme_ext_info *pmlmeinfo = &pmlmeext->mlmext_info; |
| struct sk_buff *skb = precv_frame->pkt; |
| struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data; |
| u8 *pframe = skb->data; |
| uint len = skb->len; |
| |
| if ((pmlmeinfo->state&0x03) != WIFI_FW_AP_STATE) |
| return _FAIL; |
| |
| DBG_8723A("+OnAuth23a\n"); |
| |
| sa = hdr->addr2; |
| |
| auth_mode = psecuritypriv->dot11AuthAlgrthm; |
| seq = cpu_to_le16(*(u16*)((unsigned long)pframe + |
| sizeof(struct ieee80211_hdr_3addr) + 2)); |
| algorithm = cpu_to_le16(*(u16*)((unsigned long)pframe + |
| sizeof(struct ieee80211_hdr_3addr))); |
| |
| DBG_8723A("auth alg =%x, seq =%X\n", algorithm, seq); |
| |
| if (auth_mode == 2 && |
| psecuritypriv->dot11PrivacyAlgrthm != _WEP40_ && |
| psecuritypriv->dot11PrivacyAlgrthm != _WEP104_) |
| auth_mode = 0; |
| |
| /* rx a shared-key auth but shared not enabled, or */ |
| /* rx a open-system auth but shared-key is enabled */ |
| if ((algorithm > 0 && auth_mode == 0) || |
| (algorithm == 0 && auth_mode == 1)) { |
| DBG_8723A("auth rejected due to bad alg [alg =%d, auth_mib " |
| "=%d] %02X%02X%02X%02X%02X%02X\n", |
| algorithm, auth_mode, |
| sa[0], sa[1], sa[2], sa[3], sa[4], sa[5]); |
| |
| status = WLAN_STATUS_NOT_SUPPORTED_AUTH_ALG; |
| |
| goto auth_fail; |
| } |
| |
| if (rtw_access_ctrl23a(padapter, sa) == false) { |
| status = WLAN_STATUS_AP_UNABLE_TO_HANDLE_NEW_STA; |
| goto auth_fail; |
| } |
| |
| pstat = rtw_get_stainfo23a(pstapriv, sa); |
| if (!pstat) { |
| /* allocate a new one */ |
| DBG_8723A("going to alloc stainfo for sa ="MAC_FMT"\n", |
| MAC_ARG(sa)); |
| pstat = rtw_alloc_stainfo23a(pstapriv, sa); |
| if (!pstat) { |
| DBG_8723A(" Exceed the upper limit of supported " |
| "clients...\n"); |
| status = WLAN_STATUS_AP_UNABLE_TO_HANDLE_NEW_STA; |
| goto auth_fail; |
| } |
| |
| pstat->state = WIFI_FW_AUTH_NULL; |
| pstat->auth_seq = 0; |
| |
| /* pstat->flags = 0; */ |
| /* pstat->capability = 0; */ |
| } else { |
| spin_lock_bh(&pstapriv->asoc_list_lock); |
| if (!list_empty(&pstat->asoc_list)) { |
| list_del_init(&pstat->asoc_list); |
| pstapriv->asoc_list_cnt--; |
| if (pstat->expire_to > 0) |
| { |
| /* TODO: STA re_auth within expire_to */ |
| } |
| } |
| spin_unlock_bh(&pstapriv->asoc_list_lock); |
| |
| if (seq == 1) { |
| /* TODO: STA re_auth and auth timeout */ |
| } |
| } |
| |
| spin_lock_bh(&pstapriv->auth_list_lock); |
| if (list_empty(&pstat->auth_list)) { |
| list_add_tail(&pstat->auth_list, &pstapriv->auth_list); |
| pstapriv->auth_list_cnt++; |
| } |
| spin_unlock_bh(&pstapriv->auth_list_lock); |
| |
| if (pstat->auth_seq == 0) |
| pstat->expire_to = pstapriv->auth_to; |
| |
| if ((pstat->auth_seq + 1) != seq) { |
| DBG_8723A("(1)auth rejected because out of seq [rx_seq =%d, " |
| "exp_seq =%d]!\n", seq, pstat->auth_seq+1); |
| status = WLAN_STATUS_UNKNOWN_AUTH_TRANSACTION; |
| goto auth_fail; |
| } |
| |
| if (algorithm == 0 && (auth_mode == 0 || auth_mode == 2)) { |
| if (seq == 1) { |
| pstat->state &= ~WIFI_FW_AUTH_NULL; |
| pstat->state |= WIFI_FW_AUTH_SUCCESS; |
| pstat->expire_to = pstapriv->assoc_to; |
| pstat->authalg = algorithm; |
| } else { |
| DBG_8723A("(2)auth rejected because out of seq " |
| "[rx_seq =%d, exp_seq =%d]!\n", |
| seq, pstat->auth_seq+1); |
| status = WLAN_STATUS_UNKNOWN_AUTH_TRANSACTION; |
| goto auth_fail; |
| } |
| } else { /* shared system or auto authentication */ |
| if (seq == 1) { |
| /* prepare for the challenging txt... */ |
| pstat->state &= ~WIFI_FW_AUTH_NULL; |
| pstat->state |= WIFI_FW_AUTH_STATE; |
| pstat->authalg = algorithm; |
| pstat->auth_seq = 2; |
| } else if (seq == 3) { |
| /* checking for challenging txt... */ |
| DBG_8723A("checking for challenging txt...\n"); |
| |
| p = rtw_get_ie23a(pframe + |
| sizeof(struct ieee80211_hdr_3addr) + |
| 4 + _AUTH_IE_OFFSET_, _CHLGETXT_IE_, |
| (int *)&ie_len, len - |
| sizeof(struct ieee80211_hdr_3addr) - |
| _AUTH_IE_OFFSET_ - 4); |
| |
| if ((p == NULL) || (ie_len<= 0)) { |
| DBG_8723A("auth rejected because challenge " |
| "failure!(1)\n"); |
| status = WLAN_STATUS_CHALLENGE_FAIL; |
| goto auth_fail; |
| } |
| |
| if (!memcmp((void *)(p + 2), pstat->chg_txt, 128)) { |
| pstat->state &= (~WIFI_FW_AUTH_STATE); |
| pstat->state |= WIFI_FW_AUTH_SUCCESS; |
| /* challenging txt is correct... */ |
| pstat->expire_to = pstapriv->assoc_to; |
| } else { |
| DBG_8723A("auth rejected because challenge " |
| "failure!\n"); |
| status = WLAN_STATUS_CHALLENGE_FAIL; |
| goto auth_fail; |
| } |
| } else { |
| DBG_8723A("(3)auth rejected because out of seq " |
| "[rx_seq =%d, exp_seq =%d]!\n", |
| seq, pstat->auth_seq+1); |
| status = WLAN_STATUS_UNKNOWN_AUTH_TRANSACTION; |
| goto auth_fail; |
| } |
| } |
| |
| /* Now, we are going to issue_auth23a... */ |
| pstat->auth_seq = seq + 1; |
| |
| issue_auth23a(padapter, pstat, (unsigned short)WLAN_STATUS_SUCCESS); |
| |
| if (pstat->state & WIFI_FW_AUTH_SUCCESS) |
| pstat->auth_seq = 0; |
| |
| return _SUCCESS; |
| |
| auth_fail: |
| |
| if (pstat) |
| rtw_free_stainfo23a(padapter, pstat); |
| |
| pstat = &stat; |
| memset((char *)pstat, '\0', sizeof(stat)); |
| pstat->auth_seq = 2; |
| memcpy(pstat->hwaddr, sa, 6); |
| |
| issue_auth23a(padapter, pstat, (unsigned short)status); |
| |
| #endif |
| return _FAIL; |
| } |
| |
| unsigned int OnAuth23aClient23a(struct rtw_adapter *padapter, |
| struct recv_frame *precv_frame) |
| { |
| unsigned int seq, len, status, algthm, offset; |
| unsigned char *p; |
| unsigned int go2asoc = 0; |
| struct mlme_ext_priv *pmlmeext = &padapter->mlmeextpriv; |
| struct mlme_ext_info *pmlmeinfo = &pmlmeext->mlmext_info; |
| struct sk_buff *skb = precv_frame->pkt; |
| struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data; |
| u8 *pframe = skb->data; |
| uint pkt_len = skb->len; |
| |
| DBG_8723A("%s\n", __func__); |
| |
| /* check A1 matches or not */ |
| if (!ether_addr_equal(myid(&padapter->eeprompriv), |
| ieee80211_get_DA(hdr))) |
| return _SUCCESS; |
| |
| if (!(pmlmeinfo->state & WIFI_FW_AUTH_STATE)) |
| return _SUCCESS; |
| |
| offset = ieee80211_has_protected(hdr->frame_control) ? 4: 0; |
| |
| algthm = le16_to_cpu(*(unsigned short *)((unsigned long)pframe + sizeof(struct ieee80211_hdr_3addr) + offset)); |
| seq = le16_to_cpu(*(unsigned short *)((unsigned long)pframe + sizeof(struct ieee80211_hdr_3addr) + offset + 2)); |
| status = le16_to_cpu(*(unsigned short *)((unsigned long)pframe + sizeof(struct ieee80211_hdr_3addr) + offset + 4)); |
| |
| if (status != 0) |
| { |
| DBG_8723A("clnt auth fail, status: %d\n", status); |
| if (status == 13)/* pmlmeinfo->auth_algo == dot11AuthAlgrthm_Auto) */ |
| { |
| if (pmlmeinfo->auth_algo == dot11AuthAlgrthm_Shared) |
| pmlmeinfo->auth_algo = dot11AuthAlgrthm_Open; |
| else |
| pmlmeinfo->auth_algo = dot11AuthAlgrthm_Shared; |
| /* pmlmeinfo->reauth_count = 0; */ |
| } |
| |
| set_link_timer(pmlmeext, 1); |
| goto authclnt_fail; |
| } |
| |
| if (seq == 2) |
| { |
| if (pmlmeinfo->auth_algo == dot11AuthAlgrthm_Shared) |
| { |
| /* legendary shared system */ |
| p = rtw_get_ie23a(pframe + sizeof(struct ieee80211_hdr_3addr) + _AUTH_IE_OFFSET_, _CHLGETXT_IE_, (int *)&len, |
| pkt_len - sizeof(struct ieee80211_hdr_3addr) - _AUTH_IE_OFFSET_); |
| |
| if (p == NULL) |
| { |
| /* DBG_8723A("marc: no challenge text?\n"); */ |
| goto authclnt_fail; |
| } |
| |
| memcpy((void *)(pmlmeinfo->chg_txt), (void *)(p + 2), len); |
| pmlmeinfo->auth_seq = 3; |
| issue_auth23a(padapter, NULL, 0); |
| set_link_timer(pmlmeext, REAUTH_TO); |
| |
| return _SUCCESS; |
| } |
| else |
| { |
| /* open system */ |
| go2asoc = 1; |
| } |
| } |
| else if (seq == 4) |
| { |
| if (pmlmeinfo->auth_algo == dot11AuthAlgrthm_Shared) |
| { |
| go2asoc = 1; |
| } |
| else |
| { |
| goto authclnt_fail; |
| } |
| } |
| else |
| { |
| /* this is also illegal */ |
| /* DBG_8723A("marc: clnt auth failed due to illegal seq =%x\n", seq); */ |
| goto authclnt_fail; |
| } |
| |
| if (go2asoc) |
| { |
| DBG_8723A_LEVEL(_drv_always_, "auth success, start assoc\n"); |
| start_clnt_assoc23a(padapter); |
| return _SUCCESS; |
| } |
| |
| authclnt_fail: |
| |
| /* pmlmeinfo->state &= ~(WIFI_FW_AUTH_STATE); */ |
| |
| return _FAIL; |
| } |
| |
| unsigned int OnAssocReq23a(struct rtw_adapter *padapter, struct recv_frame *precv_frame) |
| { |
| #ifdef CONFIG_8723AU_AP_MODE |
| u16 capab_info, listen_interval; |
| struct rtw_ieee802_11_elems elems; |
| struct sta_info *pstat; |
| unsigned char reassoc, *p, *pos, *wpa_ie; |
| unsigned char WMM_IE[] = {0x00, 0x50, 0xf2, 0x02, 0x00, 0x01}; |
| int i, ie_len, wpa_ie_len, left; |
| unsigned char supportRate[16]; |
| int supportRateNum; |
| unsigned short status = WLAN_STATUS_SUCCESS; |
| unsigned short ie_offset; |
| struct mlme_priv *pmlmepriv = &padapter->mlmepriv; |
| struct security_priv *psecuritypriv = &padapter->securitypriv; |
| struct mlme_ext_priv *pmlmeext = &padapter->mlmeextpriv; |
| struct mlme_ext_info *pmlmeinfo = &pmlmeext->mlmext_info; |
| struct wlan_bssid_ex *cur = &pmlmeinfo->network; |
| struct sta_priv *pstapriv = &padapter->stapriv; |
| struct sk_buff *skb = precv_frame->pkt; |
| u8 *pframe = skb->data; |
| uint pkt_len = skb->len; |
| struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data; |
| u16 frame_control; |
| #ifdef CONFIG_8723AU_P2P |
| struct wifidirect_info *pwdinfo = &padapter->wdinfo; |
| u8 p2p_status_code = P2P_STATUS_SUCCESS; |
| u8 *p2pie; |
| u32 p2pielen = 0; |
| u8 wfd_ie[ 128 ] = { 0x00 }; |
| u32 wfd_ielen = 0; |
| #endif /* CONFIG_8723AU_P2P */ |
| |
| if ((pmlmeinfo->state&0x03) != WIFI_FW_AP_STATE) |
| return _FAIL; |
| |
| frame_control = hdr->frame_control; |
| if (ieee80211_is_assoc_req(frame_control)) { |
| reassoc = 0; |
| ie_offset = _ASOCREQ_IE_OFFSET_; |
| } else { /* WIFI_REASSOCREQ */ |
| reassoc = 1; |
| ie_offset = _REASOCREQ_IE_OFFSET_; |
| } |
| |
| if (pkt_len < sizeof(struct ieee80211_hdr_3addr) + ie_offset) { |
| DBG_8723A("handle_assoc(reassoc =%d) - too short payload (len =%lu)" |
| "\n", reassoc, (unsigned long)pkt_len); |
| return _FAIL; |
| } |
| |
| pstat = rtw_get_stainfo23a(pstapriv, hdr->addr2); |
| if (!pstat) { |
| status = WLAN_REASON_CLASS2_FRAME_FROM_NONAUTH_STA; |
| goto asoc_class2_error; |
| } |
| |
| capab_info = get_unaligned_le16(pframe + sizeof(struct ieee80211_hdr_3addr)); |
| /* capab_info = le16_to_cpu(*(unsigned short *)(pframe + sizeof(struct ieee80211_hdr_3addr))); */ |
| /* listen_interval = le16_to_cpu(*(unsigned short *)(pframe + sizeof(struct ieee80211_hdr_3addr)+2)); */ |
| listen_interval = get_unaligned_le16(pframe + sizeof(struct ieee80211_hdr_3addr)+2); |
| |
| left = pkt_len - (sizeof(struct ieee80211_hdr_3addr) + ie_offset); |
| pos = pframe + (sizeof(struct ieee80211_hdr_3addr) + ie_offset); |
| |
| DBG_8723A("%s\n", __func__); |
| |
| /* check if this stat has been successfully authenticated/assocated */ |
| if (!((pstat->state) & WIFI_FW_AUTH_SUCCESS)) |
| { |
| if (!((pstat->state) & WIFI_FW_ASSOC_SUCCESS)) |
| { |
| status = WLAN_REASON_CLASS2_FRAME_FROM_NONAUTH_STA; |
| goto asoc_class2_error; |
| } |
| else |
| { |
| pstat->state &= (~WIFI_FW_ASSOC_SUCCESS); |
| pstat->state |= WIFI_FW_ASSOC_STATE; |
| } |
| } |
| else |
| { |
| pstat->state &= (~WIFI_FW_AUTH_SUCCESS); |
| pstat->state |= WIFI_FW_ASSOC_STATE; |
| } |
| |
| pstat->capability = capab_info; |
| |
| /* now parse all ieee802_11 ie to point to elems */ |
| if (rtw_ieee802_11_parse_elems23a(pos, left, &elems, 1) == ParseFailed || |
| !elems.ssid) { |
| DBG_8723A("STA " MAC_FMT " sent invalid association request\n", |
| MAC_ARG(pstat->hwaddr)); |
| status = WLAN_STATUS_UNSPECIFIED_FAILURE; |
| goto OnAssocReq23aFail; |
| } |
| |
| /* now we should check all the fields... */ |
| /* checking SSID */ |
| p = rtw_get_ie23a(pframe + sizeof(struct ieee80211_hdr_3addr) + ie_offset, _SSID_IE_, &ie_len, |
| pkt_len - sizeof(struct ieee80211_hdr_3addr) - ie_offset); |
| if (p == NULL) |
| { |
| status = WLAN_STATUS_UNSPECIFIED_FAILURE; |
| } |
| |
| if (ie_len == 0) /* broadcast ssid, however it is not allowed in assocreq */ |
| status = WLAN_STATUS_UNSPECIFIED_FAILURE; |
| else { |
| /* check if ssid match */ |
| if (memcmp((void *)(p+2), cur->Ssid.ssid, cur->Ssid.ssid_len)) |
| status = WLAN_STATUS_UNSPECIFIED_FAILURE; |
| |
| if (ie_len != cur->Ssid.ssid_len) |
| status = WLAN_STATUS_UNSPECIFIED_FAILURE; |
| } |
| |
| if (WLAN_STATUS_SUCCESS != status) |
| goto OnAssocReq23aFail; |
| |
| /* check if the supported rate is ok */ |
| p = rtw_get_ie23a(pframe + sizeof(struct ieee80211_hdr_3addr) + ie_offset, _SUPPORTEDRATES_IE_, &ie_len, pkt_len - sizeof(struct ieee80211_hdr_3addr) - ie_offset); |
| if (p == NULL) { |
| DBG_8723A("Rx a sta assoc-req which supported rate is empty!\n"); |
| /* use our own rate set as statoin used */ |
| /* memcpy(supportRate, AP_BSSRATE, AP_BSSRATE_LEN); */ |
| /* supportRateNum = AP_BSSRATE_LEN; */ |
| |
| status = WLAN_STATUS_UNSPECIFIED_FAILURE; |
| goto OnAssocReq23aFail; |
| } else { |
| memcpy(supportRate, p+2, ie_len); |
| supportRateNum = ie_len; |
| |
| p = rtw_get_ie23a(pframe + sizeof(struct ieee80211_hdr_3addr) + ie_offset, _EXT_SUPPORTEDRATES_IE_, &ie_len, |
| pkt_len - sizeof(struct ieee80211_hdr_3addr) - ie_offset); |
| if (p != NULL) { |
| |
| if (supportRateNum<= sizeof(supportRate)) |
| { |
| memcpy(supportRate+supportRateNum, p+2, ie_len); |
| supportRateNum += ie_len; |
| } |
| } |
| } |
| |
| /* todo: mask supportRate between AP & STA -> move to update raid */ |
| /* get_matched_rate(pmlmeext, supportRate, &supportRateNum, 0); */ |
| |
| /* update station supportRate */ |
| pstat->bssratelen = supportRateNum; |
| memcpy(pstat->bssrateset, supportRate, supportRateNum); |
| Update23aTblForSoftAP(pstat->bssrateset, pstat->bssratelen); |
| |
| /* check RSN/WPA/WPS */ |
| pstat->dot8021xalg = 0; |
| pstat->wpa_psk = 0; |
| pstat->wpa_group_cipher = 0; |
| pstat->wpa2_group_cipher = 0; |
| pstat->wpa_pairwise_cipher = 0; |
| pstat->wpa2_pairwise_cipher = 0; |
| memset(pstat->wpa_ie, 0, sizeof(pstat->wpa_ie)); |
| if ((psecuritypriv->wpa_psk & BIT(1)) && elems.rsn_ie) { |
| |
| int group_cipher = 0, pairwise_cipher = 0; |
| |
| wpa_ie = elems.rsn_ie; |
| wpa_ie_len = elems.rsn_ie_len; |
| |
| if (rtw_parse_wpa2_ie23a(wpa_ie-2, wpa_ie_len+2, &group_cipher, &pairwise_cipher, NULL) == _SUCCESS) { |
| pstat->dot8021xalg = 1;/* psk, todo:802.1x */ |
| pstat->wpa_psk |= BIT(1); |
| |
| pstat->wpa2_group_cipher = group_cipher&psecuritypriv->wpa2_group_cipher; |
| pstat->wpa2_pairwise_cipher = pairwise_cipher&psecuritypriv->wpa2_pairwise_cipher; |
| |
| if (!pstat->wpa2_group_cipher) |
| status = WLAN_REASON_INVALID_GROUP_CIPHER; |
| |
| if (!pstat->wpa2_pairwise_cipher) |
| status = WLAN_REASON_INVALID_PAIRWISE_CIPHER; |
| } else { |
| status = WLAN_STATUS_INVALID_IE; |
| } |
| |
| } else if ((psecuritypriv->wpa_psk & BIT(0)) && elems.wpa_ie) { |
| |
| int group_cipher = 0, pairwise_cipher = 0; |
| |
| wpa_ie = elems.wpa_ie; |
| wpa_ie_len = elems.wpa_ie_len; |
| |
| if (rtw_parse_wpa_ie23a(wpa_ie-2, wpa_ie_len+2, &group_cipher, &pairwise_cipher, NULL) == _SUCCESS) { |
| pstat->dot8021xalg = 1;/* psk, todo:802.1x */ |
| pstat->wpa_psk |= BIT(0); |
| |
| pstat->wpa_group_cipher = group_cipher&psecuritypriv->wpa_group_cipher; |
| pstat->wpa_pairwise_cipher = pairwise_cipher&psecuritypriv->wpa_pairwise_cipher; |
| |
| if (!pstat->wpa_group_cipher) |
| status = WLAN_STATUS_INVALID_GROUP_CIPHER; |
| |
| if (!pstat->wpa_pairwise_cipher) |
| status = WLAN_STATUS_INVALID_PAIRWISE_CIPHER; |
| |
| } else { |
| status = WLAN_STATUS_INVALID_IE; |
| } |
| |
| } else { |
| wpa_ie = NULL; |
| wpa_ie_len = 0; |
| } |
| |
| if (WLAN_STATUS_SUCCESS != status) |
| goto OnAssocReq23aFail; |
| |
| pstat->flags &= ~(WLAN_STA_WPS | WLAN_STA_MAYBE_WPS); |
| if (wpa_ie == NULL) { |
| if (elems.wps_ie) { |
| DBG_8723A("STA included WPS IE in " |
| "(Re)Association Request - assume WPS is " |
| "used\n"); |
| pstat->flags |= WLAN_STA_WPS; |
| } else { |
| DBG_8723A("STA did not include WPA/RSN IE " |
| "in (Re)Association Request - possible WPS " |
| "use\n"); |
| pstat->flags |= WLAN_STA_MAYBE_WPS; |
| } |
| |
| /* AP support WPA/RSN, and sta is going to do WPS, but AP is not ready */ |
| /* that the selected registrar of AP is _FLASE */ |
| if ((psecuritypriv->wpa_psk > 0) && |
| (pstat->flags & (WLAN_STA_WPS|WLAN_STA_MAYBE_WPS))) { |
| if (pmlmepriv->wps_beacon_ie) { |
| u8 selected_registrar = 0; |
| |
| rtw_get_wps_attr_content23a(pmlmepriv->wps_beacon_ie, pmlmepriv->wps_beacon_ie_len, |
| WPS_ATTR_SELECTED_REGISTRAR, &selected_registrar, NULL); |
| |
| if (!selected_registrar) { |
| DBG_8723A("selected_registrar is false , or AP is not ready to do WPS\n"); |
| |
| status = WLAN_STATUS_AP_UNABLE_TO_HANDLE_NEW_STA; |
| |
| goto OnAssocReq23aFail; |
| } |
| } |
| } |
| } else { |
| int copy_len; |
| |
| if (psecuritypriv->wpa_psk == 0) { |
| DBG_8723A("STA " MAC_FMT ": WPA/RSN IE in association " |
| "request, but AP don't support WPA/RSN\n", MAC_ARG(pstat->hwaddr)); |
| |
| status = WLAN_STATUS_INVALID_IE; |
| |
| goto OnAssocReq23aFail; |
| } |
| |
| if (elems.wps_ie) { |
| DBG_8723A("STA included WPS IE in " |
| "(Re)Association Request - WPS is " |
| "used\n"); |
| pstat->flags |= WLAN_STA_WPS; |
| copy_len = 0; |
| } else { |
| copy_len = ((wpa_ie_len+2) > sizeof(pstat->wpa_ie)) ? (sizeof(pstat->wpa_ie)):(wpa_ie_len+2); |
| } |
| |
| if (copy_len>0) |
| memcpy(pstat->wpa_ie, wpa_ie-2, copy_len); |
| |
| } |
| |
| /* check if there is WMM IE & support WWM-PS */ |
| pstat->flags &= ~WLAN_STA_WME; |
| pstat->qos_option = 0; |
| pstat->qos_info = 0; |
| pstat->has_legacy_ac = true; |
| pstat->uapsd_vo = 0; |
| pstat->uapsd_vi = 0; |
| pstat->uapsd_be = 0; |
| pstat->uapsd_bk = 0; |
| if (pmlmepriv->qospriv.qos_option) |
| { |
| p = pframe + sizeof(struct ieee80211_hdr_3addr) + ie_offset; ie_len = 0; |
| for (;;) |
| { |
| p = rtw_get_ie23a(p, _VENDOR_SPECIFIC_IE_, &ie_len, pkt_len - sizeof(struct ieee80211_hdr_3addr) - ie_offset); |
| if (p != NULL) { |
| if (!memcmp(p+2, WMM_IE, 6)) { |
| |
| pstat->flags |= WLAN_STA_WME; |
| |
| pstat->qos_option = 1; |
| pstat->qos_info = *(p+8); |
| |
| pstat->max_sp_len = (pstat->qos_info>>5)&0x3; |
| |
| if ((pstat->qos_info&0xf) != 0xf) |
| pstat->has_legacy_ac = true; |
| else |
| pstat->has_legacy_ac = false; |
| |
| if (pstat->qos_info&0xf) |
| { |
| if (pstat->qos_info&BIT(0)) |
| pstat->uapsd_vo = BIT(0)|BIT(1); |
| else |
| pstat->uapsd_vo = 0; |
| |
| if (pstat->qos_info&BIT(1)) |
| pstat->uapsd_vi = BIT(0)|BIT(1); |
| else |
| pstat->uapsd_vi = 0; |
| |
| if (pstat->qos_info&BIT(2)) |
| pstat->uapsd_bk = BIT(0)|BIT(1); |
| else |
| pstat->uapsd_bk = 0; |
| |
| if (pstat->qos_info&BIT(3)) |
| pstat->uapsd_be = BIT(0)|BIT(1); |
| else |
| pstat->uapsd_be = 0; |
| |
| } |
| |
| break; |
| } |
| } |
| else { |
| break; |
| } |
| p = p + ie_len + 2; |
| } |
| } |
| |
| /* save HT capabilities in the sta object */ |
| memset(&pstat->htpriv.ht_cap, 0, sizeof(struct ieee80211_ht_cap)); |
| if (elems.ht_capabilities && elems.ht_capabilities_len >= sizeof(struct ieee80211_ht_cap)) |
| { |
| pstat->flags |= WLAN_STA_HT; |
| |
| pstat->flags |= WLAN_STA_WME; |
| |
| memcpy(&pstat->htpriv.ht_cap, elems.ht_capabilities, sizeof(struct ieee80211_ht_cap)); |
| |
| } else |
| pstat->flags &= ~WLAN_STA_HT; |
| |
| if ((pmlmepriv->htpriv.ht_option == false) && (pstat->flags&WLAN_STA_HT)) |
| { |
| status = WLAN_STATUS_UNSPECIFIED_FAILURE; |
| goto OnAssocReq23aFail; |
| } |
| |
| if ((pstat->flags & WLAN_STA_HT) && |
| ((pstat->wpa2_pairwise_cipher&WPA_CIPHER_TKIP) || |
| (pstat->wpa_pairwise_cipher&WPA_CIPHER_TKIP))) |
| { |
| DBG_8723A("HT: " MAC_FMT " tried to " |
| "use TKIP with HT association\n", MAC_ARG(pstat->hwaddr)); |
| |
| /* status = WLAN_STATUS_CIPHER_REJECTED_PER_POLICY; */ |
| /* goto OnAssocReq23aFail; */ |
| } |
| |
| /* */ |
| pstat->flags |= WLAN_STA_NONERP; |
| for (i = 0; i < pstat->bssratelen; i++) { |
| if ((pstat->bssrateset[i] & 0x7f) > 22) { |
| pstat->flags &= ~WLAN_STA_NONERP; |
| break; |
| } |
| } |
| |
| if (pstat->capability & WLAN_CAPABILITY_SHORT_PREAMBLE) |
| pstat->flags |= WLAN_STA_SHORT_PREAMBLE; |
| else |
| pstat->flags &= ~WLAN_STA_SHORT_PREAMBLE; |
| |
| if (status != WLAN_STATUS_SUCCESS) |
| goto OnAssocReq23aFail; |
| |
| #ifdef CONFIG_8723AU_P2P |
| pstat->is_p2p_device = false; |
| if (rtw_p2p_chk_role(pwdinfo, P2P_ROLE_GO)) |
| { |
| if ((p2pie = rtw_get_p2p_ie23a(pframe + sizeof(struct ieee80211_hdr_3addr) + ie_offset, pkt_len - sizeof(struct ieee80211_hdr_3addr) - ie_offset, NULL, &p2pielen))) |
| { |
| pstat->is_p2p_device = true; |
| if ((p2p_status_code = (u8)process_assoc_req_p2p_ie23a(pwdinfo, pframe, pkt_len, pstat))>0) |
| { |
| pstat->p2p_status_code = p2p_status_code; |
| status = WLAN_STATUS_CAPS_UNSUPPORTED; |
| goto OnAssocReq23aFail; |
| } |
| } |
| #ifdef CONFIG_8723AU_P2P |
| if (rtw_get_wfd_ie(pframe + sizeof(struct ieee80211_hdr_3addr) + ie_offset, pkt_len - sizeof(struct ieee80211_hdr_3addr) - ie_offset, wfd_ie, &wfd_ielen)) |
| { |
| u8 attr_content[ 10 ] = { 0x00 }; |
| u32 attr_contentlen = 0; |
| |
| DBG_8723A("[%s] WFD IE Found!!\n", __func__); |
| rtw_get_wfd_attr_content(wfd_ie, wfd_ielen, WFD_ATTR_DEVICE_INFO, attr_content, &attr_contentlen); |
| if (attr_contentlen) |
| { |
| pwdinfo->wfd_info->peer_rtsp_ctrlport = get_unaligned_be16(attr_content + 2); |
| DBG_8723A("[%s] Peer PORT NUM = %d\n", __func__, pwdinfo->wfd_info->peer_rtsp_ctrlport); |
| } |
| } |
| #endif |
| } |
| pstat->p2p_status_code = p2p_status_code; |
| #endif /* CONFIG_8723AU_P2P */ |
| |
| /* TODO: identify_proprietary_vendor_ie(); */ |
| /* Realtek proprietary IE */ |
| /* identify if this is Broadcom sta */ |
| /* identify if this is ralink sta */ |
| /* Customer proprietary IE */ |
| |
| /* get a unique AID */ |
| if (pstat->aid > 0) { |
| DBG_8723A(" old AID %d\n", pstat->aid); |
| } else { |
| for (pstat->aid = 1; pstat->aid <= NUM_STA; pstat->aid++) |
| if (pstapriv->sta_aid[pstat->aid - 1] == NULL) |
| break; |
| |
| if (pstat->aid > NUM_STA) |
| pstat->aid = NUM_STA; |
| if (pstat->aid > pstapriv->max_num_sta) { |
| |
| pstat->aid = 0; |
| |
| DBG_8723A(" no room for more AIDs\n"); |
| |
| status = WLAN_STATUS_AP_UNABLE_TO_HANDLE_NEW_STA; |
| |
| goto OnAssocReq23aFail; |
| |
| } else { |
| pstapriv->sta_aid[pstat->aid - 1] = pstat; |
| DBG_8723A("allocate new AID = (%d)\n", pstat->aid); |
| } |
| } |
| |
| pstat->state &= (~WIFI_FW_ASSOC_STATE); |
| pstat->state |= WIFI_FW_ASSOC_SUCCESS; |
| |
| spin_lock_bh(&pstapriv->auth_list_lock); |
| if (!list_empty(&pstat->auth_list)) { |
| list_del_init(&pstat->auth_list); |
| pstapriv->auth_list_cnt--; |
| } |
| spin_unlock_bh(&pstapriv->auth_list_lock); |
| |
| spin_lock_bh(&pstapriv->asoc_list_lock); |
| if (list_empty(&pstat->asoc_list)) { |
| pstat->expire_to = pstapriv->expire_to; |
| list_add_tail(&pstat->asoc_list, &pstapriv->asoc_list); |
| pstapriv->asoc_list_cnt++; |
| } |
| spin_unlock_bh(&pstapriv->asoc_list_lock); |
| |
| /* now the station is qualified to join our BSS... */ |
| if (pstat && (pstat->state & WIFI_FW_ASSOC_SUCCESS) && |
| (WLAN_STATUS_SUCCESS == status)) { |
| #ifdef CONFIG_8723AU_AP_MODE |
| /* 1 bss_cap_update & sta_info_update23a */ |
| bss_cap_update_on_sta_join23a(padapter, pstat); |
| sta_info_update23a(padapter, pstat); |
| |
| /* issue assoc rsp before notify station join event. */ |
| if (ieee80211_is_assoc_req(frame_control)) |
| issue_asocrsp23a(padapter, status, pstat, WIFI_ASSOCRSP); |
| else |
| issue_asocrsp23a(padapter, status, pstat, WIFI_REASSOCRSP); |
| |
| /* 2 - report to upper layer */ |
| DBG_8723A("indicate_sta_join_event to upper layer - hostapd\n"); |
| rtw_cfg80211_indicate_sta_assoc(padapter, pframe, pkt_len); |
| |
| /* 3-(1) report sta add event */ |
| report_add_sta_event23a(padapter, pstat->hwaddr, pstat->aid); |
| #endif |
| } |
| |
| return _SUCCESS; |
| |
| asoc_class2_error: |
| |
| #ifdef CONFIG_8723AU_AP_MODE |
| issue_deauth23a(padapter, hdr->addr2, status); |
| #endif |
| |
| return _FAIL; |
| |
| OnAssocReq23aFail: |
| |
| #ifdef CONFIG_8723AU_AP_MODE |
| pstat->aid = 0; |
| if (ieee80211_is_assoc_req(frame_control)) |
| issue_asocrsp23a(padapter, status, pstat, WIFI_ASSOCRSP); |
| else |
| issue_asocrsp23a(padapter, status, pstat, WIFI_REASSOCRSP); |
| #endif |
| |
| #endif /* CONFIG_8723AU_AP_MODE */ |
| |
| return _FAIL; |
| } |
| |
| unsigned int OnAssocRsp23a(struct rtw_adapter *padapter, struct recv_frame *precv_frame) |
| { |
| uint i; |
| int res; |
| unsigned short status; |
| struct ndis_802_11_var_ies *pIE; |
| struct mlme_priv *pmlmepriv = &padapter->mlmepriv; |
| struct mlme_ext_priv *pmlmeext = &padapter->mlmeextpriv; |
| struct mlme_ext_info *pmlmeinfo = &pmlmeext->mlmext_info; |
| struct sk_buff *skb = precv_frame->pkt; |
| struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data; |
| u8 *pframe = skb->data; |
| uint pkt_len = skb->len; |
| |
| DBG_8723A("%s\n", __func__); |
| |
| /* check A1 matches or not */ |
| if (!ether_addr_equal(myid(&padapter->eeprompriv), |
| ieee80211_get_DA(hdr))) |
| return _SUCCESS; |
| |
| if (!(pmlmeinfo->state & (WIFI_FW_AUTH_SUCCESS | WIFI_FW_ASSOC_STATE))) |
| return _SUCCESS; |
| |
| if (pmlmeinfo->state & WIFI_FW_ASSOC_SUCCESS) |
| return _SUCCESS; |
| |
| del_timer_sync(&pmlmeext->link_timer); |
| |
| /* status */ |
| if ((status = le16_to_cpu(*(unsigned short *)(pframe + sizeof(struct ieee80211_hdr_3addr) + 2))) > 0) |
| { |
| DBG_8723A("assoc reject, status code: %d\n", status); |
| pmlmeinfo->state = WIFI_FW_NULL_STATE; |
| res = -4; |
| goto report_assoc_result; |
| } |
| |
| /* get capabilities */ |
| pmlmeinfo->capability = le16_to_cpu(*(unsigned short *)(pframe + sizeof(struct ieee80211_hdr_3addr))); |
| |
| /* set slot time */ |
| pmlmeinfo->slotTime = (pmlmeinfo->capability & BIT(10))? 9: 20; |
| |
| /* AID */ |
| res = pmlmeinfo->aid = (int)(le16_to_cpu(*(unsigned short *)(pframe + sizeof(struct ieee80211_hdr_3addr) + 4))&0x3fff); |
| |
| /* following are moved to join event callback function */ |
| /* to handle HT, WMM, rate adaptive, update MAC reg */ |
| /* for not to handle the synchronous IO in the tasklet */ |
| for (i = (6 + sizeof(struct ieee80211_hdr_3addr)); i < pkt_len;) { |
| pIE = (struct ndis_802_11_var_ies *)(pframe + i); |
| |
| switch (pIE->ElementID) |
| { |
| case _VENDOR_SPECIFIC_IE_: |
| if (!memcmp(pIE->data, WMM_PARA_OUI23A, 6))/* WMM */ |
| WMM_param_handler23a(padapter, pIE); |
| #if defined(CONFIG_8723AU_P2P) |
| else if (!memcmp(pIE->data, WFD_OUI23A, 4)) { /* WFD */ |
| DBG_8723A("[%s] Found WFD IE\n", __func__); |
| WFD_info_handler(padapter, pIE); |
| } |
| #endif |
| break; |
| |
| case _HT_CAPABILITY_IE_: /* HT caps */ |
| HT_caps_handler23a(padapter, pIE); |
| break; |
| |
| case _HT_EXTRA_INFO_IE_: /* HT info */ |
| HT_info_handler23a(padapter, pIE); |
| break; |
| |
| case _ERPINFO_IE_: |
| ERP_IE_handler23a(padapter, pIE); |
| |
| default: |
| break; |
| } |
| |
| i += (pIE->Length + 2); |
| } |
| |
| pmlmeinfo->state &= (~WIFI_FW_ASSOC_STATE); |
| pmlmeinfo->state |= WIFI_FW_ASSOC_SUCCESS; |
| |
| /* Update Basic Rate Table for spec, 2010-12-28 , by thomas */ |
| UpdateBrateTbl23a(padapter, pmlmeinfo->network.SupportedRates); |
| |
| report_assoc_result: |
| pmlmepriv->assoc_rsp_len = 0; |
| if (res > 0) { |
| kfree(pmlmepriv->assoc_rsp); |
| pmlmepriv->assoc_rsp = kmalloc(pkt_len, GFP_ATOMIC); |
| if (pmlmepriv->assoc_rsp) { |
| memcpy(pmlmepriv->assoc_rsp, pframe, pkt_len); |
| pmlmepriv->assoc_rsp_len = pkt_len; |
| } |
| } else |
| kfree(pmlmepriv->assoc_rsp); |
| |
| report_join_res23a(padapter, res); |
| |
| return _SUCCESS; |
| } |
| |
| unsigned int OnDeAuth23a(struct rtw_adapter *padapter, |
| struct recv_frame *precv_frame) |
| { |
| unsigned short reason; |
| struct mlme_priv *pmlmepriv = &padapter->mlmepriv; |
| struct mlme_ext_priv *pmlmeext = &padapter->mlmeextpriv; |
| struct mlme_ext_info *pmlmeinfo = &pmlmeext->mlmext_info; |
| struct sk_buff *skb = precv_frame->pkt; |
| struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data; |
| u8 *pframe = skb->data; |
| #ifdef CONFIG_8723AU_P2P |
| struct wifidirect_info *pwdinfo = &padapter->wdinfo; |
| #endif /* CONFIG_8723AU_P2P */ |
| |
| /* check A3 */ |
| if (!ether_addr_equal(hdr->addr3, get_my_bssid23a(&pmlmeinfo->network))) |
| return _SUCCESS; |
| |
| #ifdef CONFIG_8723AU_P2P |
| if (pwdinfo->rx_invitereq_info.scan_op_ch_only) { |
| mod_timer(&pwdinfo->reset_ch_sitesurvey, |
| jiffies + msecs_to_jiffies(10)); |
| } |
| #endif /* CONFIG_8723AU_P2P */ |
| |
| reason = le16_to_cpu(*(unsigned short *)(pframe + sizeof(struct ieee80211_hdr_3addr))); |
| |
| DBG_8723A("%s Reason code(%d)\n", __func__, reason); |
| |
| #ifdef CONFIG_8723AU_AP_MODE |
| if (check_fwstate(pmlmepriv, WIFI_AP_STATE) == true) { |
| struct sta_info *psta; |
| struct sta_priv *pstapriv = &padapter->stapriv; |
| |
| DBG_8723A_LEVEL(_drv_always_, "ap recv deauth reason code(%d) " |
| "sta:%pM\n", reason, hdr->addr2); |
| |
| psta = rtw_get_stainfo23a(pstapriv, hdr->addr2); |
| if (psta) { |
| u8 updated = 0; |
| |
| spin_lock_bh(&pstapriv->asoc_list_lock); |
| if (!list_empty(&psta->asoc_list)) { |
| list_del_init(&psta->asoc_list); |
| pstapriv->asoc_list_cnt--; |
| updated = ap_free_sta23a(padapter, psta, |
| false, reason); |
| } |
| spin_unlock_bh(&pstapriv->asoc_list_lock); |
| |
| associated_clients_update23a(padapter, updated); |
| } |
| |
| return _SUCCESS; |
| } |
| else |
| #endif |
| { |
| DBG_8723A_LEVEL(_drv_always_, "sta recv deauth reason code(%d) " |
| "sta:%pM\n", reason, hdr->addr3); |
| |
| receive_disconnect23a(padapter, hdr->addr3, reason); |
| } |
| pmlmepriv->LinkDetectInfo.bBusyTraffic = false; |
| return _SUCCESS; |
| } |
| |
| unsigned int OnDisassoc23a(struct rtw_adapter *padapter, struct recv_frame *precv_frame) |
| { |
| unsigned short reason; |
| struct mlme_priv *pmlmepriv = &padapter->mlmepriv; |
| struct mlme_ext_priv *pmlmeext = &padapter->mlmeextpriv; |
| struct mlme_ext_info *pmlmeinfo = &pmlmeext->mlmext_info; |
| struct sk_buff *skb = precv_frame->pkt; |
| struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data; |
| u8 *pframe = skb->data; |
| #ifdef CONFIG_8723AU_P2P |
| struct wifidirect_info *pwdinfo = &padapter->wdinfo; |
| #endif /* CONFIG_8723AU_P2P */ |
| |
| /* check A3 */ |
| if (!ether_addr_equal(hdr->addr3, get_my_bssid23a(&pmlmeinfo->network))) |
| return _SUCCESS; |
| |
| #ifdef CONFIG_8723AU_P2P |
| if (pwdinfo->rx_invitereq_info.scan_op_ch_only) |
| { |
| mod_timer(&pwdinfo->reset_ch_sitesurvey, |
| jiffies + msecs_to_jiffies(10)); |
| } |
| #endif /* CONFIG_8723AU_P2P */ |
| |
| reason = le16_to_cpu(*(unsigned short *) |
| (pframe + sizeof(struct ieee80211_hdr_3addr))); |
| |
| DBG_8723A("%s Reason code(%d)\n", __func__, reason); |
| |
| #ifdef CONFIG_8723AU_AP_MODE |
| if (check_fwstate(pmlmepriv, WIFI_AP_STATE)) { |
| struct sta_info *psta; |
| struct sta_priv *pstapriv = &padapter->stapriv; |
| |
| DBG_8723A_LEVEL(_drv_always_, "ap recv disassoc reason code(%d)" |
| " sta:%pM\n", reason, hdr->addr2); |
| |
| psta = rtw_get_stainfo23a(pstapriv, hdr->addr2); |
| if (psta) { |
| u8 updated = 0; |
| |
| spin_lock_bh(&pstapriv->asoc_list_lock); |
| if (!list_empty(&psta->asoc_list)) { |
| list_del_init(&psta->asoc_list); |
| pstapriv->asoc_list_cnt--; |
| updated = ap_free_sta23a(padapter, psta, |
| false, reason); |
| } |
| spin_unlock_bh(&pstapriv->asoc_list_lock); |
| |
| associated_clients_update23a(padapter, updated); |
| } |
| |
| return _SUCCESS; |
| } |
| else |
| #endif |
| { |
| DBG_8723A_LEVEL(_drv_always_, "ap recv disassoc reason " |
| "code(%d) sta:%pM\n", reason, hdr->addr3); |
| |
| receive_disconnect23a(padapter, hdr->addr3, reason); |
| } |
| pmlmepriv->LinkDetectInfo.bBusyTraffic = false; |
| return _SUCCESS; |
| } |
| |
| unsigned int OnAtim23a(struct rtw_adapter *padapter, struct recv_frame *precv_frame) |
| { |
| DBG_8723A("%s\n", __func__); |
| return _SUCCESS; |
| } |
| |
| unsigned int on_action_spct23a(struct rtw_adapter *padapter, struct recv_frame *precv_frame) |
| { |
| return _FAIL; |
| } |
| |
| unsigned int OnAction23a_qos(struct rtw_adapter *padapter, struct recv_frame *precv_frame) |
| { |
| return _SUCCESS; |
| } |
| |
| unsigned int OnAction23a_dls(struct rtw_adapter *padapter, struct recv_frame *precv_frame) |
| { |
| return _SUCCESS; |
| } |
| |
| unsigned int OnAction23a_back23a(struct rtw_adapter *padapter, struct recv_frame *precv_frame) |
| { |
| u8 *addr; |
| struct sta_info *psta = NULL; |
| struct recv_reorder_ctrl *preorder_ctrl; |
| unsigned char *frame_body; |
| unsigned char category, action; |
| unsigned short tid, status, reason_code = 0; |
| struct mlme_ext_priv *pmlmeext = &padapter->mlmeextpriv; |
| struct mlme_ext_info *pmlmeinfo = &pmlmeext->mlmext_info; |
| struct sk_buff *skb = precv_frame->pkt; |
| struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data; |
| u8 *pframe = skb->data; |
| struct sta_priv *pstapriv = &padapter->stapriv; |
| |
| /* check RA matches or not */ |
| if (!ether_addr_equal(myid(&padapter->eeprompriv), hdr->addr1)) |
| return _SUCCESS; |
| |
| DBG_8723A("%s\n", __func__); |
| |
| if ((pmlmeinfo->state&0x03) != WIFI_FW_AP_STATE) |
| if (!(pmlmeinfo->state & WIFI_FW_ASSOC_SUCCESS)) |
| return _SUCCESS; |
| |
| addr = hdr->addr2; |
| psta = rtw_get_stainfo23a(pstapriv, addr); |
| |
| if (!psta) |
| return _SUCCESS; |
| |
| frame_body = (unsigned char *) |
| (pframe + sizeof(struct ieee80211_hdr_3addr)); |
| |
| category = frame_body[0]; |
| if (category == WLAN_CATEGORY_BACK) { /* representing Block Ack */ |
| if (!pmlmeinfo->HT_enable) |
| return _SUCCESS; |
| action = frame_body[1]; |
| DBG_8723A("%s, action =%d\n", __func__, action); |
| switch (action) { |
| case WLAN_ACTION_ADDBA_REQ: /* ADDBA request */ |
| memcpy(&pmlmeinfo->ADDBA_req, &frame_body[2], |
| sizeof(struct ADDBA_request)); |
| process_addba_req23a(padapter, |
| (u8 *)&pmlmeinfo->ADDBA_req, addr); |
| if (pmlmeinfo->bAcceptAddbaReq == true) |
| issue_action_BA23a(padapter, addr, |
| WLAN_ACTION_ADDBA_RESP, 0); |
| else { |
| /* reject ADDBA Req */ |
| issue_action_BA23a(padapter, addr, |
| WLAN_ACTION_ADDBA_RESP, 37); |
| } |
| break; |
| case WLAN_ACTION_ADDBA_RESP: /* ADDBA response */ |
| status = get_unaligned_le16(&frame_body[3]); |
| tid = ((frame_body[5] >> 2) & 0x7); |
| if (status == 0) { /* successful */ |
| DBG_8723A("agg_enable for TID =%d\n", tid); |
| psta->htpriv.agg_enable_bitmap |= 1 << tid; |
| psta->htpriv.candidate_tid_bitmap &= |
| ~CHKBIT(tid); |
| } else |
| psta->htpriv.agg_enable_bitmap &= ~CHKBIT(tid); |
| break; |
| |
| case WLAN_ACTION_DELBA: /* DELBA */ |
| if ((frame_body[3] & BIT(3)) == 0) { |
| psta->htpriv.agg_enable_bitmap &= |
| ~(1 << ((frame_body[3] >> 4) & 0xf)); |
| psta->htpriv.candidate_tid_bitmap &= |
| ~(1 << ((frame_body[3] >> 4) & 0xf)); |
| |
| /* reason_code = frame_body[4] | (frame_body[5] << 8); */ |
| reason_code = get_unaligned_le16(&frame_body[4]); |
| } else if ((frame_body[3] & BIT(3)) == BIT(3)) { |
| tid = (frame_body[3] >> 4) & 0x0F; |
| |
| preorder_ctrl = &psta->recvreorder_ctrl[tid]; |
| preorder_ctrl->enable = false; |
| preorder_ctrl->indicate_seq = 0xffff; |
| } |
| |
| DBG_8723A("%s(): DELBA: %x(%x)\n", __func__, |
| pmlmeinfo->agg_enable_bitmap, reason_code); |
| /* todo: how to notify the host while receiving |
| DELETE BA */ |
| break; |
| default: |
| break; |
| } |
| } |
| return _SUCCESS; |
| } |
| |
| #ifdef CONFIG_8723AU_P2P |
| |
| static int get_reg_classes_full_count(struct p2p_channels channel_list) { |
| int cnt = 0; |
| int i; |
| |
| for (i = 0; i < channel_list.reg_classes; i++) |
| cnt += channel_list.reg_class[i].channels; |
| |
| return cnt; |
| } |
| |
| void issue_p2p_GO_request23a(struct rtw_adapter *padapter, u8* raddr) |
| { |
| unsigned char category = WLAN_CATEGORY_PUBLIC; |
| u8 action = P2P_PUB_ACTION_ACTION; |
| u32 p2poui = cpu_to_be32(P2POUI); |
| u8 oui_subtype = P2P_GO_NEGO_REQ; |
| u8 wpsie[ 255 ] = { 0x00 }, p2pie[ 255 ] = { 0x00 }; |
| u8 wpsielen = 0, p2pielen = 0; |
| u16 len_channellist_attr = 0; |
| #ifdef CONFIG_8723AU_P2P |
| u32 wfdielen = 0; |
| #endif /* CONFIG_8723AU_P2P */ |
| |
| struct xmit_frame *pmgntframe; |
| struct pkt_attrib *pattrib; |
| unsigned char *pframe; |
| struct ieee80211_hdr *pwlanhdr; |
| unsigned short *fctrl; |
| struct xmit_priv *pxmitpriv = &padapter->xmitpriv; |
| struct mlme_ext_priv *pmlmeext = &padapter->mlmeextpriv; |
| struct wifidirect_info *pwdinfo = &padapter->wdinfo; |
| |
| if ((pmgntframe = alloc_mgtxmitframe23a(pxmitpriv)) == NULL) |
| return; |
| |
| DBG_8723A("[%s] In\n", __func__); |
| /* update attribute */ |
| pattrib = &pmgntframe->attrib; |
| update_mgntframe_attrib23a(padapter, pattrib); |
| |
| memset(pmgntframe->buf_addr, 0, WLANHDR_OFFSET + TXDESC_OFFSET); |
| |
| pframe = (u8 *)(pmgntframe->buf_addr) + TXDESC_OFFSET; |
| pwlanhdr = (struct ieee80211_hdr *)pframe; |
| |
| fctrl = &pwlanhdr->frame_control; |
| *fctrl = 0; |
| |
| ether_addr_copy(pwlanhdr->addr1, raddr); |
| ether_addr_copy(pwlanhdr->addr2, myid(&padapter->eeprompriv)); |
| ether_addr_copy(pwlanhdr->addr3, myid(&padapter->eeprompriv)); |
| |
| SetSeqNum(pwlanhdr, pmlmeext->mgnt_seq); |
| pmlmeext->mgnt_seq++; |
| SetFrameSubType(pframe, WIFI_ACTION); |
| |
| pframe += sizeof(struct ieee80211_hdr_3addr); |
| pattrib->pktlen = sizeof(struct ieee80211_hdr_3addr); |
| |
| pframe = rtw_set_fixed_ie23a(pframe, 1, &category, &pattrib->pktlen); |
| pframe = rtw_set_fixed_ie23a(pframe, 1, &action, &pattrib->pktlen); |
| pframe = rtw_set_fixed_ie23a(pframe, 4, (unsigned char *)&p2poui, |
| &pattrib->pktlen); |
| pframe = rtw_set_fixed_ie23a(pframe, 1, &oui_subtype, &pattrib->pktlen); |
| pwdinfo->negotiation_dialog_token = 1; /*Initialize the dialog value*/ |
| pframe = rtw_set_fixed_ie23a(pframe, 1, |
| &pwdinfo->negotiation_dialog_token, |
| &pattrib->pktlen); |
| |
| /* WPS Section */ |
| wpsielen = 0; |
| /* WPS OUI */ |
| *(u32*) (wpsie) = cpu_to_be32(WPSOUI); |
| wpsielen += 4; |
| |
| /* WPS version */ |
| /* Type: */ |
| *(u16*) (wpsie + wpsielen) = cpu_to_be16(WPS_ATTR_VER1); |
| wpsielen += 2; |
| |
| /* Length: */ |
| *(u16*) (wpsie + wpsielen) = cpu_to_be16(0x0001); |
| wpsielen += 2; |
| |
| /* Value: */ |
| wpsie[wpsielen++] = WPS_VERSION_1; /* Version 1.0 */ |
| |
| /* Device Password ID */ |
| /* Type: */ |
| *(u16*) (wpsie + wpsielen) = cpu_to_be16(WPS_ATTR_DEVICE_PWID); |
| wpsielen += 2; |
| |
| /* Length: */ |
| *(u16*) (wpsie + wpsielen) = cpu_to_be16(0x0002); |
| wpsielen += 2; |
| |
| /* Value: */ |
| |
| if (pwdinfo->ui_got_wps_info == P2P_GOT_WPSINFO_PEER_DISPLAY_PIN) |
| { |
| *(u16*) (wpsie + wpsielen) = cpu_to_be16(WPS_DPID_USER_SPEC); |
| } |
| else if (pwdinfo->ui_got_wps_info == P2P_GOT_WPSINFO_SELF_DISPLAY_PIN) |
| { |
| *(u16*) (wpsie + wpsielen) = cpu_to_be16(WPS_DPID_REGISTRAR_SPEC); |
| } |
| else if (pwdinfo->ui_got_wps_info == P2P_GOT_WPSINFO_PBC) |
| { |
| *(u16*) (wpsie + wpsielen) = cpu_to_be16(WPS_DPID_PBC); |
| } |
| |
| wpsielen += 2; |
| |
| pframe = rtw_set_ie23a(pframe, _VENDOR_SPECIFIC_IE_, wpsielen, (unsigned char *) wpsie, &pattrib->pktlen); |
| |
| /* P2P IE Section. */ |
| |
| /* P2P OUI */ |
| p2pielen = 0; |
| p2pie[p2pielen++] = 0x50; |
| p2pie[p2pielen++] = 0x6F; |
| p2pie[p2pielen++] = 0x9A; |
| p2pie[p2pielen++] = 0x09; /* WFA P2P v1.0 */ |
| |
| /* Commented by Albert 20110306 */ |
| /* According to the P2P Specification, the group negoitation request frame should contain 9 P2P attributes */ |
| /* 1. P2P Capability */ |
| /* 2. Group Owner Intent */ |
| /* 3. Configuration Timeout */ |
| /* 4. Listen Channel */ |
| /* 5. Extended Listen Timing */ |
| /* 6. Intended P2P Interface Address */ |
| /* 7. Channel List */ |
| /* 8. P2P Device Info */ |
| /* 9. Operating Channel */ |
| |
| /* P2P Capability */ |
| /* Type: */ |
| p2pie[p2pielen++] = P2P_ATTR_CAPABILITY; |
| |
| /* Length: */ |
| *(u16*) (p2pie + p2pielen) = cpu_to_le16(0x0002); |
| p2pielen += 2; |
| |
| /* Value: */ |
| /* Device Capability Bitmap, 1 byte */ |
| p2pie[p2pielen++] = DMP_P2P_DEVCAP_SUPPORT; |
| |
| /* Group Capability Bitmap, 1 byte */ |
| if (pwdinfo->persistent_supported) |
| { |
| p2pie[p2pielen++] = P2P_GRPCAP_CROSS_CONN | P2P_GRPCAP_PERSISTENT_GROUP; |
| } |
| else |
| { |
| p2pie[p2pielen++] = P2P_GRPCAP_CROSS_CONN; |
| } |
| |
| /* Group Owner Intent */ |
| /* Type: */ |
| p2pie[p2pielen++] = P2P_ATTR_GO_INTENT; |
| |
| /* Length: */ |
| *(u16*) (p2pie + p2pielen) = cpu_to_le16(0x0001); |
| p2pielen += 2; |
| |
| /* Value: */ |
| /* Todo the tie breaker bit. */ |
| p2pie[p2pielen++] = ((pwdinfo->intent << 1) | BIT(0)); |
| |
| /* Configuration Timeout */ |
| /* Type: */ |
| p2pie[p2pielen++] = P2P_ATTR_CONF_TIMEOUT; |
| |
| /* Length: */ |
| *(u16*) (p2pie + p2pielen) = cpu_to_le16(0x0002); |
| p2pielen += 2; |
| |
| /* Value: */ |
| p2pie[p2pielen++] = 200; /* 2 seconds needed to be the P2P GO */ |
| p2pie[p2pielen++] = 200; /* 2 seconds needed to be the P2P Client */ |
| |
| /* Listen Channel */ |
| /* Type: */ |
| p2pie[p2pielen++] = P2P_ATTR_LISTEN_CH; |
| |
| /* Length: */ |
| *(u16*) (p2pie + p2pielen) = cpu_to_le16(0x0005); |
| p2pielen += 2; |
| |
| /* Value: */ |
| /* Country String */ |
| p2pie[p2pielen++] = 'X'; |
| p2pie[p2pielen++] = 'X'; |
| |
| /* The third byte should be set to 0x04. */ |
| /* Described in the "Operating Channel Attribute" section. */ |
| p2pie[p2pielen++] = 0x04; |
| |
| /* Operating Class */ |
| p2pie[p2pielen++] = 0x51; /* Copy from SD7 */ |
| |
| /* Channel Number */ |
| p2pie[p2pielen++] = pwdinfo->listen_channel; /* listening channel number */ |
| |
| /* Extended Listen Timing ATTR */ |
| /* Type: */ |
| p2pie[p2pielen++] = P2P_ATTR_EX_LISTEN_TIMING; |
| |
| /* Length: */ |
| *(u16*) (p2pie + p2pielen) = cpu_to_le16(0x0004); |
| p2pielen += 2; |
| |
| /* Value: */ |
| /* Availability Period */ |
| *(u16*) (p2pie + p2pielen) = cpu_to_le16(0xFFFF); |
| p2pielen += 2; |
| |
| /* Availability Interval */ |
| *(u16*) (p2pie + p2pielen) = cpu_to_le16(0xFFFF); |
| p2pielen += 2; |
| |
| /* Intended P2P Interface Address */ |
| /* Type: */ |
| p2pie[p2pielen++] = P2P_ATTR_INTENTED_IF_ADDR; |
| |
| /* Length: */ |
| *(u16*) (p2pie + p2pielen) = cpu_to_le16(ETH_ALEN); |
| p2pielen += 2; |
| |
| /* Value: */ |
| memcpy(p2pie + p2pielen, myid(&padapter->eeprompriv), ETH_ALEN); |
| p2pielen += ETH_ALEN; |
| |
| /* Channel List */ |
| /* Type: */ |
| p2pie[p2pielen++] = P2P_ATTR_CH_LIST; |
| |
| /* Length: */ |
| /* Country String(3) */ |
| /* + (Operating Class (1) + Number of Channels(1)) * Operation Classes (?) */ |
| /* + number of channels in all classes */ |
| len_channellist_attr = 3 |
| + (1 + 1) * (u16)(pmlmeext->channel_list.reg_classes) |
| + get_reg_classes_full_count(pmlmeext->channel_list); |
| |
| *(u16*) (p2pie + p2pielen) = cpu_to_le16(len_channellist_attr); |
| p2pielen += 2; |
| |
| /* Value: */ |
| /* Country String */ |
| p2pie[p2pielen++] = 'X'; |
| p2pie[p2pielen++] = 'X'; |
| |
| /* The third byte should be set to 0x04. */ |
| /* Described in the "Operating Channel Attribute" section. */ |
| p2pie[p2pielen++] = 0x04; |
| |
| /* Channel Entry List */ |
| |
| { |
| int i, j; |
| for (j = 0; j < pmlmeext->channel_list.reg_classes; j++) { |
| /* Operating Class */ |
| p2pie[p2pielen++] = pmlmeext->channel_list.reg_class[j].reg_class; |
| |
| /* Number of Channels */ |
| p2pie[p2pielen++] = pmlmeext->channel_list.reg_class[j].channels; |
| |
| /* Channel List */ |
| for (i = 0; i < pmlmeext->channel_list.reg_class[j].channels; i++) { |
| p2pie[p2pielen++] = pmlmeext->channel_list.reg_class[j].channel[i]; |
| } |
| } |
| } |
| |
| /* Device Info */ |
| /* Type: */ |
| p2pie[p2pielen++] = P2P_ATTR_DEVICE_INFO; |
| |
| /* Length: */ |
| /* 21 -> P2P Device Address (6bytes) + Config Methods (2bytes) + Primary Device Type (8bytes) */ |
| /* + NumofSecondDevType (1byte) + WPS Device Name ID field (2bytes) + WPS Device Name Len field (2bytes) */ |
| *(u16*) (p2pie + p2pielen) = cpu_to_le16(21 + pwdinfo->device_name_len); |
| p2pielen += 2; |
| |
| /* Value: */ |
| /* P2P Device Address */ |
| memcpy(p2pie + p2pielen, myid(&padapter->eeprompriv), ETH_ALEN); |
| p2pielen += ETH_ALEN; |
| |
| /* Config Method */ |
| /* This field should be big endian. Noted by P2P specification. */ |
| |
| *(u16*) (p2pie + p2pielen) = cpu_to_be16(pwdinfo->supported_wps_cm); |
| |
| p2pielen += 2; |
| |
| /* Primary Device Type */ |
| /* Category ID */ |
| *(u16*) (p2pie + p2pielen) = cpu_to_be16(WPS_PDT_CID_MULIT_MEDIA); |
| p2pielen += 2; |
| |
| /* OUI */ |
| *(u32*) (p2pie + p2pielen) = cpu_to_be32(WPSOUI); |
| p2pielen += 4; |
| |
| /* Sub Category ID */ |
| *(u16*) (p2pie + p2pielen) = cpu_to_be16(WPS_PDT_SCID_MEDIA_SERVER); |
| p2pielen += 2; |
| |
| /* Number of Secondary Device Types */ |
| p2pie[p2pielen++] = 0x00; /* No Secondary Device Type List */ |
| |
| /* Device Name */ |
| /* Type: */ |
| *(u16*) (p2pie + p2pielen) = cpu_to_be16(WPS_ATTR_DEVICE_NAME); |
| p2pielen += 2; |
| |
| /* Length: */ |
| *(u16*) (p2pie + p2pielen) = cpu_to_be16(pwdinfo->device_name_len); |
| p2pielen += 2; |
| |
| /* Value: */ |
| memcpy(p2pie + p2pielen, pwdinfo->device_name, |
| pwdinfo->device_name_len); |
| p2pielen += pwdinfo->device_name_len; |
| |
| /* Operating Channel */ |
| /* Type: */ |
| p2pie[p2pielen++] = P2P_ATTR_OPERATING_CH; |
| |
| /* Length: */ |
| *(u16*) (p2pie + p2pielen) = cpu_to_le16(0x0005); |
| p2pielen += 2; |
| |
| /* Value: */ |
| /* Country String */ |
| p2pie[p2pielen++] = 'X'; |
| p2pie[p2pielen++] = 'X'; |
| |
| /* The third byte should be set to 0x04. */ |
| /* Described in the "Operating Channel Attribute" section. */ |
| p2pie[p2pielen++] = 0x04; |
| |
| /* Operating Class */ |
| if (pwdinfo->operating_channel <= 14) |
| { |
| /* Operating Class */ |
| p2pie[p2pielen++] = 0x51; |
| } |
| else if ((pwdinfo->operating_channel >= 36) && (pwdinfo->operating_channel <= 48)) |
| { |
| /* Operating Class */ |
| p2pie[p2pielen++] = 0x73; |
| } |
| else |
| { |
| /* Operating Class */ |
| p2pie[p2pielen++] = 0x7c; |
| } |
| |
| /* Channel Number */ |
| p2pie[p2pielen++] = pwdinfo->operating_channel; /* operating channel number */ |
| |
| pframe = rtw_set_ie23a(pframe, _VENDOR_SPECIFIC_IE_, p2pielen, (unsigned char *) p2pie, &pattrib->pktlen); |
| |
| #ifdef CONFIG_8723AU_P2P |
| wfdielen = build_nego_req_wfd_ie(pwdinfo, pframe); |
| pframe += wfdielen; |
| pattrib->pktlen += wfdielen; |
| #endif /* CONFIG_8723AU_P2P */ |
| |
| pattrib->last_txcmdsz = pattrib->pktlen; |
| |
| dump_mgntframe23a(padapter, pmgntframe); |
| |
| return; |
| } |
| |
| static void issue_p2p_GO_response(struct rtw_adapter *padapter, u8* raddr, u8* frame_body, uint len, u8 result) |
| { |
| |
| unsigned char category = WLAN_CATEGORY_PUBLIC; |
| u8 action = P2P_PUB_ACTION_ACTION; |
| u32 p2poui = cpu_to_be32(P2POUI); |
| u8 oui_subtype = P2P_GO_NEGO_RESP; |
| u8 wpsie[255] = { 0x00 }, p2pie[255] = { 0x00 }; |
| u8 p2pielen = 0; |
| uint wpsielen = 0; |
| u16 wps_devicepassword_id = 0x0000; |
| uint wps_devicepassword_id_len = 0; |
| u16 len_channellist_attr = 0; |
| int i, j; |
| struct xmit_frame *pmgntframe; |
| struct pkt_attrib *pattrib; |
| unsigned char *pframe; |
| struct ieee80211_hdr *pwlanhdr; |
| unsigned short *fctrl; |
| struct xmit_priv *pxmitpriv = &padapter->xmitpriv; |
| struct mlme_ext_priv *pmlmeext = &padapter->mlmeextpriv; |
| struct wifidirect_info *pwdinfo = &padapter->wdinfo; |
| #ifdef CONFIG_8723AU_P2P |
| u32 wfdielen = 0; |
| #endif /* CONFIG_8723AU_P2P */ |
| |
| if ((pmgntframe = alloc_mgtxmitframe23a(pxmitpriv)) == NULL) |
| return; |
| |
| DBG_8723A("[%s] In, result = %d\n", __func__, result); |
| /* update attribute */ |
| pattrib = &pmgntframe->attrib; |
| update_mgntframe_attrib23a(padapter, pattrib); |
| |
| memset(pmgntframe->buf_addr, 0, WLANHDR_OFFSET + TXDESC_OFFSET); |
| |
| pframe = (u8 *)(pmgntframe->buf_addr) + TXDESC_OFFSET; |
| pwlanhdr = (struct ieee80211_hdr *)pframe; |
| |
| fctrl = &pwlanhdr->frame_control; |
| *fctrl = 0; |
| |
| ether_addr_copy(pwlanhdr->addr1, raddr); |
| ether_addr_copy(pwlanhdr->addr2, myid(&padapter->eeprompriv)); |
| ether_addr_copy(pwlanhdr->addr3, myid(&padapter->eeprompriv)); |
| |
| SetSeqNum(pwlanhdr, pmlmeext->mgnt_seq); |
| pmlmeext->mgnt_seq++; |
| SetFrameSubType(pframe, WIFI_ACTION); |
| |
| pframe += sizeof(struct ieee80211_hdr_3addr); |
| pattrib->pktlen = sizeof(struct ieee80211_hdr_3addr); |
| |
| pframe = rtw_set_fixed_ie23a(pframe, 1, &category, &pattrib->pktlen); |
| pframe = rtw_set_fixed_ie23a(pframe, 1, &action, &pattrib->pktlen); |
| pframe = rtw_set_fixed_ie23a(pframe, 4, (unsigned char *) &p2poui, |
| &pattrib->pktlen); |
| pframe = rtw_set_fixed_ie23a(pframe, 1, &oui_subtype, &pattrib->pktlen); |
| /* The Dialog Token of provisioning discovery request frame. */ |
| pwdinfo->negotiation_dialog_token = frame_body[7]; |
| pframe = rtw_set_fixed_ie23a(pframe, 1, |
| &pwdinfo->negotiation_dialog_token, |
| &pattrib->pktlen); |
| |
| /* Commented by Albert 20110328 */ |
| /* Try to get the device password ID from the WPS IE of group |
| negotiation request frame */ |
| /* WiFi Direct test plan 5.1.15 */ |
| rtw_get_wps_ie23a(frame_body + _PUBLIC_ACTION_IE_OFFSET_, |
| len - _PUBLIC_ACTION_IE_OFFSET_, wpsie, &wpsielen); |
| rtw_get_wps_attr_content23a(wpsie, wpsielen, WPS_ATTR_DEVICE_PWID, |
| (u8 *)&wps_devicepassword_id, |
| &wps_devicepassword_id_len); |
| wps_devicepassword_id = be16_to_cpu(wps_devicepassword_id); |
| |
| memset(wpsie, 0x00, 255); |
| wpsielen = 0; |
| |
| /* WPS Section */ |
| wpsielen = 0; |
| /* WPS OUI */ |
| *(u32*) (wpsie) = cpu_to_be32(WPSOUI); |
| wpsielen += 4; |
| |
| /* WPS version */ |
| /* Type: */ |
| *(u16*) (wpsie + wpsielen) = cpu_to_be16(WPS_ATTR_VER1); |
| wpsielen += 2; |
| |
| /* Length: */ |
| *(u16*) (wpsie + wpsielen) = cpu_to_be16(0x0001); |
| wpsielen += 2; |
| |
| /* Value: */ |
| wpsie[wpsielen++] = WPS_VERSION_1; /* Version 1.0 */ |
| |
| /* Device Password ID */ |
| /* Type: */ |
| *(u16*) (wpsie + wpsielen) = cpu_to_be16(WPS_ATTR_DEVICE_PWID); |
| wpsielen += 2; |
| |
| /* Length: */ |
| *(u16*) (wpsie + wpsielen) = cpu_to_be16(0x0002); |
| wpsielen += 2; |
| |
| /* Value: */ |
| if (wps_devicepassword_id == WPS_DPID_USER_SPEC) { |
| *(u16*) (wpsie + wpsielen) = |
| cpu_to_be16(WPS_DPID_REGISTRAR_SPEC); |
| } else if (wps_devicepassword_id == WPS_DPID_REGISTRAR_SPEC) { |
| *(u16*) (wpsie + wpsielen) = cpu_to_be16(WPS_DPID_USER_SPEC); |
| } else { |
| *(u16*) (wpsie + wpsielen) = cpu_to_be16(WPS_DPID_PBC); |
| } |
| wpsielen += 2; |
| |
| /* Commented by Kurt 20120113 */ |
| /* If some device wants to do p2p handshake without sending prov_disc_req */ |
| /* We have to get peer_req_cm from here. */ |
| if (!memcmp(pwdinfo->rx_prov_disc_info.strconfig_method_desc_of_prov_disc_req, "000", 3)) { |
| if (wps_devicepassword_id == WPS_DPID_USER_SPEC) { |
| memcpy(pwdinfo->rx_prov_disc_info.strconfig_method_desc_of_prov_disc_req, "dis", 3); |
| } else if (wps_devicepassword_id == WPS_DPID_REGISTRAR_SPEC) { |
| memcpy(pwdinfo->rx_prov_disc_info.strconfig_method_desc_of_prov_disc_req, "pad", 3); |
| } else { |
| memcpy(pwdinfo->rx_prov_disc_info.strconfig_method_desc_of_prov_disc_req, "pbc", 3); |
| } |
| } |
| |
| pframe = rtw_set_ie23a(pframe, _VENDOR_SPECIFIC_IE_, wpsielen, |
| (unsigned char *) wpsie, &pattrib->pktlen); |
| |
| /* P2P IE Section. */ |
| |
| /* P2P OUI */ |
| p2pielen = 0; |
| p2pie[p2pielen++] = 0x50; |
| p2pie[p2pielen++] = 0x6F; |
| p2pie[p2pielen++] = 0x9A; |
| p2pie[p2pielen++] = 0x09; /* WFA P2P v1.0 */ |
| |
| /* Commented by Albert 20100908 */ |
| /* According to the P2P Specification, the group negoitation |
| response frame should contain 9 P2P attributes */ |
| /* 1. Status */ |
| /* 2. P2P Capability */ |
| /* 3. Group Owner Intent */ |
| /* 4. Configuration Timeout */ |
| /* 5. Operating Channel */ |
| /* 6. Intended P2P Interface Address */ |
| /* 7. Channel List */ |
| /* 8. Device Info */ |
| /* 9. Group ID (Only GO) */ |
| |
| /* ToDo: */ |
| |
| /* P2P Status */ |
| /* Type: */ |
| p2pie[p2pielen++] = P2P_ATTR_STATUS; |
| |
| /* Length: */ |
| *(u16*) (p2pie + p2pielen) = cpu_to_le16(0x0001); |
| p2pielen += 2; |
| |
| /* Value: */ |
| p2pie[p2pielen++] = result; |
| |
| /* P2P Capability */ |
| /* Type: */ |
| p2pie[p2pielen++] = P2P_ATTR_CAPABILITY; |
| |
| /* Length: */ |
| *(u16*) (p2pie + p2pielen) = cpu_to_le16(0x0002); |
| p2pielen += 2; |
| |
| /* Value: */ |
| /* Device Capability Bitmap, 1 byte */ |
| |
| if (rtw_p2p_chk_role(pwdinfo, P2P_ROLE_CLIENT)) { |
| /* Commented by Albert 2011/03/08 */ |
| /* According to the P2P specification */ |
| /* if the sending device will be client, the P2P |
| Capability should be reserved of group negotation |
| response frame */ |
| p2pie[p2pielen++] = 0; |
| } else { |
| /* Be group owner or meet the error case */ |
| p2pie[p2pielen++] = DMP_P2P_DEVCAP_SUPPORT; |
| } |
| |
| /* Group Capability Bitmap, 1 byte */ |
| if (pwdinfo->persistent_supported) { |
| p2pie[p2pielen++] = P2P_GRPCAP_CROSS_CONN | |
| P2P_GRPCAP_PERSISTENT_GROUP; |
| } else { |
| p2pie[p2pielen++] = P2P_GRPCAP_CROSS_CONN; |
| } |
| |
| /* Group Owner Intent */ |
| /* Type: */ |
| p2pie[p2pielen++] = P2P_ATTR_GO_INTENT; |
| |
| /* Length: */ |
| *(u16*) (p2pie + p2pielen) = cpu_to_le16(0x0001); |
| p2pielen += 2; |
| |
| /* Value: */ |
| if (pwdinfo->peer_intent & 0x01) { |
| /* Peer's tie breaker bit is 1, our tie breaker |
| bit should be 0 */ |
| p2pie[p2pielen++] = (pwdinfo->intent << 1); |
| } else { |
| /* Peer's tie breaker bit is 0, our tie breaker bit |
| should be 1 */ |
| p2pie[p2pielen++] = ((pwdinfo->intent << 1) | BIT(0)); |
| } |
| |
| /* Configuration Timeout */ |
| /* Type: */ |
| p2pie[p2pielen++] = P2P_ATTR_CONF_TIMEOUT; |
| |
| /* Length: */ |
| *(u16*) (p2pie + p2pielen) = cpu_to_le16(0x0002); |
| p2pielen += 2; |
| |
| /* Value: */ |
| /* 2 seconds needed to be the P2P GO */ |
| p2pie[p2pielen++] = 200; |
| /* 2 seconds needed to be the P2P Client */ |
| p2pie[p2pielen++] = 200; |
| |
| /* Operating Channel */ |
| /* Type: */ |
| p2pie[p2pielen++] = P2P_ATTR_OPERATING_CH; |
| |
| /* Length: */ |
| *(u16*) (p2pie + p2pielen) = cpu_to_le16(0x0005); |
| p2pielen += 2; |
| |
| /* Value: */ |
| /* Country String */ |
| p2pie[p2pielen++] = 'X'; |
| p2pie[p2pielen++] = 'X'; |
| |
| /* The third byte should be set to 0x04. */ |
| /* Described in the "Operating Channel Attribute" section. */ |
| p2pie[p2pielen++] = 0x04; |
| |
| /* Operating Class */ |
| if (pwdinfo->operating_channel <= 14) { |
| /* Operating Class */ |
| p2pie[p2pielen++] = 0x51; |
| } else if ((pwdinfo->operating_channel >= 36) && |
| (pwdinfo->operating_channel <= 48)) { |
| /* Operating Class */ |
| p2pie[p2pielen++] = 0x73; |
| } else { |
| /* Operating Class */ |
| p2pie[p2pielen++] = 0x7c; |
| } |
| |
| /* Channel Number */ |
| /* operating channel number */ |
| p2pie[p2pielen++] = pwdinfo->operating_channel; |
| |
| /* Intended P2P Interface Address */ |
| /* Type: */ |
| p2pie[p2pielen++] = P2P_ATTR_INTENTED_IF_ADDR; |
| |
| /* Length: */ |
| *(u16*) (p2pie + p2pielen) = cpu_to_le16(ETH_ALEN); |
| p2pielen += 2; |
| |
| /* Value: */ |
| memcpy(p2pie + p2pielen, myid(&padapter->eeprompriv), ETH_ALEN); |
| p2pielen += ETH_ALEN; |
| |
| /* Channel List */ |
| /* Type: */ |
| p2pie[p2pielen++] = P2P_ATTR_CH_LIST; |
| |
| /* Country String(3) */ |
| /* + (Operating Class (1) + Number of Channels(1)) * |
| Operation Classes (?) */ |
| /* + number of channels in all classes */ |
| len_channellist_attr = 3 + |
| (1 + 1) * (u16)pmlmeext->channel_list.reg_classes + |
| get_reg_classes_full_count(pmlmeext->channel_list); |
| |
| *(u16*) (p2pie + p2pielen) = cpu_to_le16(len_channellist_attr); |
| |
| p2pielen += 2; |
| |
| /* Value: */ |
| /* Country String */ |
| p2pie[p2pielen++] = 'X'; |
| p2pie[p2pielen++] = 'X'; |
| |
| /* The third byte should be set to 0x04. */ |
| /* Described in the "Operating Channel Attribute" section. */ |
| p2pie[p2pielen++] = 0x04; |
| |
| /* Channel Entry List */ |
| |
| for (j = 0; j < pmlmeext->channel_list.reg_classes; j++) { |
| /* Operating Class */ |
| p2pie[p2pielen++] = |
| pmlmeext->channel_list.reg_class[j].reg_class; |
| |
| /* Number of Channels */ |
| p2pie[p2pielen++] = |
| pmlmeext->channel_list.reg_class[j].channels; |
| |
| /* Channel List */ |
| for (i = 0; |
| i < pmlmeext->channel_list.reg_class[j].channels; i++) { |
| p2pie[p2pielen++] = |
| pmlmeext->channel_list.reg_class[j].channel[i]; |
| } |
| } |
| |
| /* Device Info */ |
| /* Type: */ |
| p2pie[p2pielen++] = P2P_ATTR_DEVICE_INFO; |
| |
| /* Length: */ |
| /* 21 -> P2P Device Address (6bytes) + Config Methods (2bytes) + |
| Primary Device Type (8bytes) */ |
| /* + NumofSecondDevType (1byte) + WPS Device Name ID field |
| (2bytes) + WPS Device Name Len field (2bytes) */ |
| *(u16*) (p2pie + p2pielen) = cpu_to_le16(21 + pwdinfo->device_name_len); |
| p2pielen += 2; |
| |
| /* Value: */ |
| /* P2P Device Address */ |
| memcpy(p2pie + p2pielen, myid(&padapter->eeprompriv), ETH_ALEN); |
| p2pielen += ETH_ALEN; |
| |
| /* Config Method */ |
| /* This field should be big endian. Noted by P2P specification. */ |
| |
| *(u16*) (p2pie + p2pielen) = cpu_to_be16(pwdinfo->supported_wps_cm); |
| |
| p2pielen += 2; |
| |
| /* Primary Device Type */ |
| /* Category ID */ |
| *(u16*) (p2pie + p2pielen) = cpu_to_be16(WPS_PDT_CID_MULIT_MEDIA); |
| p2pielen += 2; |
| |
| /* OUI */ |
| *(u32*) (p2pie + p2pielen) = cpu_to_be32(WPSOUI); |
| p2pielen += 4; |
| |
| /* Sub Category ID */ |
| *(u16*) (p2pie + p2pielen) = cpu_to_be16(WPS_PDT_SCID_MEDIA_SERVER); |
| p2pielen += 2; |
| |
| /* Number of Secondary Device Types */ |
| p2pie[p2pielen++] = 0x00; /* No Secondary Device Type List */ |
| |
| /* Device Name */ |
| /* Type: */ |
| *(u16*) (p2pie + p2pielen) = cpu_to_be16(WPS_ATTR_DEVICE_NAME); |
| p2pielen += 2; |
| |
| /* Length: */ |
| *(u16*) (p2pie + p2pielen) = cpu_to_be16(pwdinfo->device_name_len); |
| p2pielen += 2; |
| |
| /* Value: */ |
| memcpy(p2pie + p2pielen, pwdinfo->device_name, |
| pwdinfo->device_name_len); |
| p2pielen += pwdinfo->device_name_len; |
| |
| if (rtw_p2p_chk_role(pwdinfo, P2P_ROLE_GO)) |
| { |
| /* Group ID Attribute */ |
| /* Type: */ |
| p2pie[p2pielen++] = P2P_ATTR_GROUP_ID; |
| |
| /* Length: */ |
| *(u16*) (p2pie + p2pielen) = |
| cpu_to_le16(ETH_ALEN + pwdinfo->nego_ssidlen); |
| p2pielen += 2; |
| |
| /* Value: */ |
| /* p2P Device Address */ |
| memcpy(p2pie + p2pielen, pwdinfo->device_addr, ETH_ALEN); |
| p2pielen += ETH_ALEN; |
| |
| /* SSID */ |
| memcpy(p2pie + p2pielen, pwdinfo->nego_ssid, |
| pwdinfo->nego_ssidlen); |
| p2pielen += pwdinfo->nego_ssidlen; |
| |
| } |
| |
| pframe = rtw_set_ie23a(pframe, _VENDOR_SPECIFIC_IE_, p2pielen, |
| (unsigned char *) p2pie, &pattrib->pktlen); |
| |
| #ifdef CONFIG_8723AU_P2P |
| wfdielen = build_nego_resp_wfd_ie(pwdinfo, pframe); |
| pframe += wfdielen; |
| pattrib->pktlen += wfdielen; |
| #endif /* CONFIG_8723AU_P2P */ |
| |
| pattrib->last_txcmdsz = pattrib->pktlen; |
| |
| dump_mgntframe23a(padapter, pmgntframe); |
| |
| return; |
| } |
| |
| static void issue_p2p_GO_confirm(struct rtw_adapter *padapter, u8* raddr, |
| u8 result) |
| { |
| |
| unsigned char category = WLAN_CATEGORY_PUBLIC; |
| u8 action = P2P_PUB_ACTION_ACTION; |
| u32 p2poui = cpu_to_be32(P2POUI); |
| u8 oui_subtype = P2P_GO_NEGO_CONF; |
| u8 p2pie[ 255 ] = { 0x00 }; |
| u8 p2pielen = 0; |
| struct xmit_frame *pmgntframe; |
| struct pkt_attrib *pattrib; |
| unsigned char *pframe; |
| struct ieee80211_hdr *pwlanhdr; |
| unsigned short *fctrl; |
| struct xmit_priv *pxmitpriv = &padapter->xmitpriv; |
| struct mlme_ext_priv *pmlmeext = &padapter->mlmeextpriv; |
| struct wifidirect_info *pwdinfo = &padapter->wdinfo; |
| #ifdef CONFIG_8723AU_P2P |
| u32 wfdielen = 0; |
| #endif /* CONFIG_8723AU_P2P */ |
| |
| if ((pmgntframe = alloc_mgtxmitframe23a(pxmitpriv)) == NULL) |
| return; |
| |
| DBG_8723A("[%s] In\n", __func__); |
| /* update attribute */ |
| pattrib = &pmgntframe->attrib; |
| update_mgntframe_attrib23a(padapter, pattrib); |
| |
| memset(pmgntframe->buf_addr, 0, WLANHDR_OFFSET + TXDESC_OFFSET); |
| |
| pframe = (u8 *)(pmgntframe->buf_addr) + TXDESC_OFFSET; |
| pwlanhdr = (struct ieee80211_hdr *)pframe; |
| |
| fctrl = &pwlanhdr->frame_control; |
| *fctrl = 0; |
| |
| ether_addr_copy(pwlanhdr->addr1, raddr); |
| ether_addr_copy(pwlanhdr->addr2, myid(&padapter->eeprompriv)); |
| ether_addr_copy(pwlanhdr->addr3, myid(&padapter->eeprompriv)); |
| |
| SetSeqNum(pwlanhdr, pmlmeext->mgnt_seq); |
| pmlmeext->mgnt_seq++; |
| SetFrameSubType(pframe, WIFI_ACTION); |
| |
| pframe += sizeof(struct ieee80211_hdr_3addr); |
| pattrib->pktlen = sizeof(struct ieee80211_hdr_3addr); |
| |
| pframe = rtw_set_fixed_ie23a(pframe, 1, &category, &pattrib->pktlen); |
| pframe = rtw_set_fixed_ie23a(pframe, 1, &action, &pattrib->pktlen); |
| pframe = rtw_set_fixed_ie23a(pframe, 4, (unsigned char *)&p2poui, |
| &pattrib->pktlen); |
| pframe = rtw_set_fixed_ie23a(pframe, 1, &oui_subtype, &pattrib->pktlen); |
| pframe = rtw_set_fixed_ie23a(pframe, 1, |
| &pwdinfo->negotiation_dialog_token, |
| &pattrib->pktlen); |
| /* P2P OUI */ |
| p2pielen = 0; |
| p2pie[p2pielen++] = 0x50; |
| p2pie[p2pielen++] = 0x6F; |
| p2pie[p2pielen++] = 0x9A; |
| p2pie[p2pielen++] = 0x09; /* WFA P2P v1.0 */ |
| |
| /* Commented by Albert 20110306 */ |
| /* According to the P2P Specification, the group negoitation |
| request frame should contain 5 P2P attributes */ |
| /* 1. Status */ |
| /* 2. P2P Capability */ |
| /* 3. Operating Channel */ |
| /* 4. Channel List */ |
| /* 5. Group ID (if this WiFi is GO) */ |
| |
| /* P2P Status */ |
| /* Type: */ |
| p2pie[p2pielen++] = P2P_ATTR_STATUS; |
| |
| /* Length: */ |
| *(u16*) (p2pie + p2pielen) = cpu_to_le16(0x0001); |
| p2pielen += 2; |
| |
| /* Value: */ |
| p2pie[p2pielen++] = result; |
| |
| /* P2P Capability */ |
| /* Type: */ |
| p2pie[p2pielen++] = P2P_ATTR_CAPABILITY; |
| |
| /* Length: */ |
| *(u16*) (p2pie + p2pielen) = cpu_to_le16(0x0002); |
| p2pielen += 2; |
| |
| /* Value: */ |
| /* Device Capability Bitmap, 1 byte */ |
| p2pie[p2pielen++] = DMP_P2P_DEVCAP_SUPPORT; |
| |
| /* Group Capability Bitmap, 1 byte */ |
| if (pwdinfo->persistent_supported) { |
| p2pie[p2pielen++] = P2P_GRPCAP_CROSS_CONN | |
| P2P_GRPCAP_PERSISTENT_GROUP; |
| } else { |
| p2pie[p2pielen++] = P2P_GRPCAP_CROSS_CONN; |
| } |
| |
| /* Operating Channel */ |
| /* Type: */ |
| p2pie[p2pielen++] = P2P_ATTR_OPERATING_CH; |
| |
| /* Length: */ |
| *(u16*) (p2pie + p2pielen) = cpu_to_le16(0x0005); |
| p2pielen += 2; |
| |
| /* Value: */ |
| /* Country String */ |
| p2pie[p2pielen++] = 'X'; |
| p2pie[p2pielen++] = 'X'; |
| |
| /* The third byte should be set to 0x04. */ |
| /* Described in the "Operating Channel Attribute" section. */ |
| p2pie[p2pielen++] = 0x04; |
| |
| if (rtw_p2p_chk_role(pwdinfo, P2P_ROLE_CLIENT)) { |
| if (pwdinfo->peer_operating_ch <= 14) { |
| /* Operating Class */ |
| p2pie[p2pielen++] = 0x51; |
| } else if ((pwdinfo->peer_operating_ch >= 36) && |
| (pwdinfo->peer_operating_ch <= 48)) { |
| /* Operating Class */ |
| p2pie[p2pielen++] = 0x73; |
| } else { |
| /* Operating Class */ |
| p2pie[p2pielen++] = 0x7c; |
| } |
| |
| p2pie[p2pielen++] = pwdinfo->peer_operating_ch; |
| } else { |
| if (pwdinfo->operating_channel <= 14) { |
| /* Operating Class */ |
| p2pie[p2pielen++] = 0x51; |
| } |
| else if ((pwdinfo->operating_channel >= 36) && |
| (pwdinfo->operating_channel <= 48)) { |
| /* Operating Class */ |
| p2pie[p2pielen++] = 0x73; |
| } else { |
| /* Operating Class */ |
| p2pie[p2pielen++] = 0x7c; |
| } |
| |
| /* Channel Number */ |
| /* Use the listen channel as the operating channel */ |
| p2pie[p2pielen++] = pwdinfo->operating_channel; |
| } |
| |
| /* Channel List */ |
| /* Type: */ |
| p2pie[p2pielen++] = P2P_ATTR_CH_LIST; |
| |
| /* Length: */ |
| *(u16*) (p2pie + p2pielen) = |
| cpu_to_le16(pwdinfo->channel_list_attr_len); |
| p2pielen += 2; |
| |
| /* Value: */ |
| memcpy(p2pie + p2pielen, pwdinfo->channel_list_attr, |
| pwdinfo->channel_list_attr_len); |
| p2pielen += pwdinfo->channel_list_attr_len; |
| |
| if (rtw_p2p_chk_role(pwdinfo, P2P_ROLE_GO)) { |
| /* Group ID Attribute */ |
| /* Type: */ |
| p2pie[p2pielen++] = P2P_ATTR_GROUP_ID; |
| |
| /* Length: */ |
| *(u16*) (p2pie + p2pielen) = |
| cpu_to_le16(ETH_ALEN + pwdinfo->nego_ssidlen); |
| p2pielen += 2; |
| |
| /* Value: */ |
| /* p2P Device Address */ |
| memcpy(p2pie + p2pielen, pwdinfo->device_addr, ETH_ALEN); |
| p2pielen += ETH_ALEN; |
| |
| /* SSID */ |
| memcpy(p2pie + p2pielen, pwdinfo->nego_ssid, |
| pwdinfo->nego_ssidlen); |
| p2pielen += pwdinfo->nego_ssidlen; |
| } |
| |
| pframe = rtw_set_ie23a(pframe, _VENDOR_SPECIFIC_IE_, p2pielen, |
| (unsigned char *)p2pie, &pattrib->pktlen); |
| |
| #ifdef CONFIG_8723AU_P2P |
| wfdielen = build_nego_confirm_wfd_ie(pwdinfo, pframe); |
| pframe += wfdielen; |
| pattrib->pktlen += wfdielen; |
| #endif /* CONFIG_8723AU_P2P */ |
| |
| pattrib->last_txcmdsz = pattrib->pktlen; |
| |
| dump_mgntframe23a(padapter, pmgntframe); |
| |
| return; |
| } |
| |
| void issue_p2p_invitation_request23a(struct rtw_adapter *padapter, u8* raddr) |
| { |
| unsigned char category = WLAN_CATEGORY_PUBLIC; |
| u8 action = P2P_PUB_ACTION_ACTION; |
| u32 p2poui = cpu_to_be32(P2POUI); |
| u8 oui_subtype = P2P_INVIT_REQ; |
| u8 p2pie[ 255 ] = { 0x00 }; |
| u8 p2pielen = 0; |
| u8 dialogToken = 3; |
| u16 len_channellist_attr = 0; |
| #ifdef CONFIG_8723AU_P2P |
| u32 wfdielen = 0; |
| #endif /* CONFIG_8723AU_P2P */ |
| int i, j; |
| struct xmit_frame *pmgntframe; |
| struct pkt_attrib *pattrib; |
| unsigned char *pframe; |
| struct ieee80211_hdr *pwlanhdr; |
| unsigned short *fctrl; |
| struct xmit_priv *pxmitpriv = &padapter->xmitpriv; |
| struct mlme_ext_priv *pmlmeext = &padapter->mlmeextpriv; |
| struct wifidirect_info *pwdinfo = &padapter->wdinfo; |
| |
| if ((pmgntframe = alloc_mgtxmitframe23a(pxmitpriv)) == NULL) |
| return; |
| |
| /* update attribute */ |
| pattrib = &pmgntframe->attrib; |
| update_mgntframe_attrib23a(padapter, pattrib); |
| |
| memset(pmgntframe->buf_addr, 0, WLANHDR_OFFSET + TXDESC_OFFSET); |
| |
| pframe = (u8 *)(pmgntframe->buf_addr) + TXDESC_OFFSET; |
| pwlanhdr = (struct ieee80211_hdr *)pframe; |
| |
| fctrl = &pwlanhdr->frame_control; |
| *fctrl = 0; |
| |
| ether_addr_copy(pwlanhdr->addr1, raddr); |
| ether_addr_copy(pwlanhdr->addr2, myid(&padapter->eeprompriv)); |
| ether_addr_copy(pwlanhdr->addr3, raddr); |
| |
| SetSeqNum(pwlanhdr, pmlmeext->mgnt_seq); |
| pmlmeext->mgnt_seq++; |
| SetFrameSubType(pframe, WIFI_ACTION); |
| |
| pframe += sizeof(struct ieee80211_hdr_3addr); |
| pattrib->pktlen = sizeof(struct ieee80211_hdr_3addr); |
| |
| pframe = rtw_set_fixed_ie23a(pframe, 1, &category, &pattrib->pktlen); |
| pframe = rtw_set_fixed_ie23a(pframe, 1, &action, &pattrib->pktlen); |
| pframe = rtw_set_fixed_ie23a(pframe, 4, (unsigned char *) &p2poui, |
| &pattrib->pktlen); |
| pframe = rtw_set_fixed_ie23a(pframe, 1, &oui_subtype, &pattrib->pktlen); |
| pframe = rtw_set_fixed_ie23a(pframe, 1, &dialogToken, &pattrib->pktlen); |
| |
| /* P2P IE Section. */ |
| |
| /* P2P OUI */ |
| p2pielen = 0; |
| p2pie[p2pielen++] = 0x50; |
| p2pie[p2pielen++] = 0x6F; |
| p2pie[p2pielen++] = 0x9A; |
| p2pie[p2pielen++] = 0x09; /* WFA P2P v1.0 */ |
| |
| /* Commented by Albert 20101011 */ |
| /* According to the P2P Specification, the P2P Invitation |
| request frame should contain 7 P2P attributes */ |
| /* 1. Configuration Timeout */ |
| /* 2. Invitation Flags */ |
| /* 3. Operating Channel (Only GO) */ |
| /* 4. P2P Group BSSID (Should be included if I am the GO) */ |
| /* 5. Channel List */ |
| /* 6. P2P Group ID */ |
| /* 7. P2P Device Info */ |
| |
| /* Configuration Timeout */ |
| /* Type: */ |
| p2pie[p2pielen++] = P2P_ATTR_CONF_TIMEOUT; |
| |
| /* Length: */ |
| *(u16*) (p2pie + p2pielen) = cpu_to_le16(0x0002); |
| p2pielen += 2; |
| |
| /* Value: */ |
| /* 2 seconds needed to be the P2P GO */ |
| p2pie[p2pielen++] = 200; |
| /* 2 seconds needed to be the P2P Client */ |
| p2pie[p2pielen++] = 200; |
| |
| /* Invitation Flags */ |
| /* Type: */ |
| p2pie[p2pielen++] = P2P_ATTR_INVITATION_FLAGS; |
| |
| /* Length: */ |
| *(u16*) (p2pie + p2pielen) = cpu_to_le16(0x0001); |
| p2pielen += 2; |
| |
| /* Value: */ |
| p2pie[p2pielen++] = P2P_INVITATION_FLAGS_PERSISTENT; |
| |
| /* Operating Channel */ |
| /* Type: */ |
| p2pie[p2pielen++] = P2P_ATTR_OPERATING_CH; |
| |
| /* Length: */ |
| *(u16*) (p2pie + p2pielen) = cpu_to_le16(0x0005); |
| p2pielen += 2; |
| |
| /* Value: */ |
| /* Country String */ |
| p2pie[p2pielen++] = 'X'; |
| p2pie[p2pielen++] = 'X'; |
| |
| /* The third byte should be set to 0x04. */ |
| /* Described in the "Operating Channel Attribute" section. */ |
| p2pie[p2pielen++] = 0x04; |
| |
| /* Operating Class */ |
| if (pwdinfo->invitereq_info.operating_ch <= 14) |
| p2pie[p2pielen++] = 0x51; |
| else if ((pwdinfo->invitereq_info.operating_ch >= 36) && |
| (pwdinfo->invitereq_info.operating_ch <= 48)) |
| p2pie[p2pielen++] = 0x73; |
| else |
| p2pie[p2pielen++] = 0x7c; |
| |
| /* Channel Number */ |
| /* operating channel number */ |
| p2pie[p2pielen++] = pwdinfo->invitereq_info.operating_ch; |
| |
| if (ether_addr_equal(myid(&padapter->eeprompriv), |
| pwdinfo->invitereq_info.go_bssid)) { |
| /* P2P Group BSSID */ |
| /* Type: */ |
| p2pie[p2pielen++] = P2P_ATTR_GROUP_BSSID; |
| |
| /* Length: */ |
| *(u16*) (p2pie + p2pielen) = cpu_to_le16(ETH_ALEN); |
| p2pielen += 2; |
| |
| /* Value: */ |
| /* P2P Device Address for GO */ |
| memcpy(p2pie + p2pielen, pwdinfo->invitereq_info.go_bssid, |
| ETH_ALEN); |
| p2pielen += ETH_ALEN; |
| } |
| |
| /* Channel List */ |
| /* Type: */ |
| p2pie[p2pielen++] = P2P_ATTR_CH_LIST; |
| |
| /* Length: */ |
| /* Country String(3) */ |
| /* + (Operating Class (1) + Number of Channels(1)) * |
| Operation Classes (?) */ |
| /* + number of channels in all classes */ |
| len_channellist_attr = 3 + |
| (1 + 1) * (u16)pmlmeext->channel_list.reg_classes + |
| get_reg_classes_full_count(pmlmeext->channel_list); |
| |
| *(u16*) (p2pie + p2pielen) = cpu_to_le16(len_channellist_attr); |
| p2pielen += 2; |
| |
| /* Value: */ |
| /* Country String */ |
| p2pie[p2pielen++] = 'X'; |
| p2pie[p2pielen++] = 'X'; |
| |
| /* The third byte should be set to 0x04. */ |
| /* Described in the "Operating Channel Attribute" section. */ |
| p2pie[p2pielen++] = 0x04; |
| |
| /* Channel Entry List */ |
| for (j = 0; j < pmlmeext->channel_list.reg_classes; j++) { |
| /* Operating Class */ |
| p2pie[p2pielen++] = |
| pmlmeext->channel_list.reg_class[j].reg_class; |
| |
| /* Number of Channels */ |
| p2pie[p2pielen++] = |
| pmlmeext->channel_list.reg_class[j].channels; |
| |
| /* Channel List */ |
| for (i = 0; |
| i < pmlmeext->channel_list.reg_class[j].channels; i++) { |
| p2pie[p2pielen++] = |
| pmlmeext->channel_list.reg_class[j].channel[i]; |
| } |
| } |
| |
| /* P2P Group ID */ |
| /* Type: */ |
| p2pie[p2pielen++] = P2P_ATTR_GROUP_ID; |
| |
| /* Length: */ |
| *(u16*) (p2pie + p2pielen) = |
| cpu_to_le16(6 + pwdinfo->invitereq_info.ssidlen); |
| p2pielen += 2; |
| |
| /* Value: */ |
| /* P2P Device Address for GO */ |
| memcpy(p2pie + p2pielen, pwdinfo->invitereq_info.go_bssid, ETH_ALEN); |
| p2pielen += ETH_ALEN; |
| |
| /* SSID */ |
| memcpy(p2pie + p2pielen, pwdinfo->invitereq_info.go_ssid, |
| pwdinfo->invitereq_info.ssidlen); |
| p2pielen += pwdinfo->invitereq_info.ssidlen; |
| |
| /* Device Info */ |
| /* Type: */ |
| p2pie[p2pielen++] = P2P_ATTR_DEVICE_INFO; |
| |
| /* Length: */ |
| /* 21 -> P2P Device Address (6bytes) + Config Methods (2bytes) + |
| Primary Device Type (8bytes) */ |
| /* + NumofSecondDevType (1byte) + WPS Device Name ID field |
| (2bytes) + WPS Device Name Len field (2bytes) */ |
| *(u16*) (p2pie + p2pielen) = cpu_to_le16(21 + pwdinfo->device_name_len); |
| p2pielen += 2; |
| |
| /* Value: */ |
| /* P2P Device Address */ |
| memcpy(p2pie + p2pielen, myid(&padapter->eeprompriv), ETH_ALEN); |
| p2pielen += ETH_ALEN; |
| |
| /* Config Method */ |
| /* This field should be big endian. Noted by P2P specification. */ |
| *(u16*) (p2pie + p2pielen) = cpu_to_be16(WPS_CONFIG_METHOD_DISPLAY); |
| p2pielen += 2; |
| |
| /* Primary Device Type */ |
| /* Category ID */ |
| *(u16*) (p2pie + p2pielen) = cpu_to_be16(WPS_PDT_CID_MULIT_MEDIA); |
| p2pielen += 2; |
| |
| /* OUI */ |
| *(u32*) (p2pie + p2pielen) = cpu_to_be32(WPSOUI); |
| p2pielen += 4; |
| |
| /* Sub Category ID */ |
| *(u16*) (p2pie + p2pielen) = cpu_to_be16(WPS_PDT_SCID_MEDIA_SERVER); |
| p2pielen += 2; |
| |
| /* Number of Secondary Device Types */ |
| p2pie[p2pielen++] = 0x00; /* No Secondary Device Type List */ |
| |
| /* Device Name */ |
| /* Type: */ |
| *(u16*) (p2pie + p2pielen) = cpu_to_be16(WPS_ATTR_DEVICE_NAME); |
| p2pielen += 2; |
| |
| /* Length: */ |
| *(u16*) (p2pie + p2pielen) = cpu_to_be16(pwdinfo->device_name_len); |
| p2pielen += 2; |
| |
| /* Value: */ |
| memcpy(p2pie + p2pielen, pwdinfo->device_name, |
| pwdinfo->device_name_len); |
| p2pielen += pwdinfo->device_name_len; |
| |
| pframe = rtw_set_ie23a(pframe, _VENDOR_SPECIFIC_IE_, p2pielen, |
| (unsigned char *) p2pie, &pattrib->pktlen); |
| |
| #ifdef CONFIG_8723AU_P2P |
| wfdielen = build_invitation_req_wfd_ie(pwdinfo, pframe); |
| pframe += wfdielen; |
| pattrib->pktlen += wfdielen; |
| #endif /* CONFIG_8723AU_P2P */ |
| |
| pattrib->last_txcmdsz = pattrib->pktlen; |
| |
| dump_mgntframe23a(padapter, pmgntframe); |
| |
| return; |
| } |
| |
| void issue_p2p_invitation_response23a(struct rtw_adapter *padapter, u8 *raddr, |
| u8 dialogToken, u8 status_code) |
| { |
| unsigned char category = WLAN_CATEGORY_PUBLIC; |
| u8 action = P2P_PUB_ACTION_ACTION; |
| u32 p2poui = cpu_to_be32(P2POUI); |
| u8 oui_subtype = P2P_INVIT_RESP; |
| u8 p2pie[ 255 ] = { 0x00 }; |
| u8 p2pielen = 0; |
| u16 len_channellist_attr = 0; |
| #ifdef CONFIG_8723AU_P2P |
| u32 wfdielen = 0; |
| #endif /* CONFIG_8723AU_P2P */ |
| int i, j; |
| |
| struct xmit_frame *pmgntframe; |
| struct pkt_attrib *pattrib; |
| unsigned char *pframe; |
| struct ieee80211_hdr *pwlanhdr; |
| unsigned short *fctrl; |
| struct xmit_priv *pxmitpriv = &padapter->xmitpriv; |
| struct mlme_ext_priv *pmlmeext = &padapter->mlmeextpriv; |
| struct wifidirect_info *pwdinfo = &padapter->wdinfo; |
| |
| if ((pmgntframe = alloc_mgtxmitframe23a(pxmitpriv)) == NULL) |
| return; |
| |
| /* update attribute */ |
| pattrib = &pmgntframe->attrib; |
| update_mgntframe_attrib23a(padapter, pattrib); |
| |
| memset(pmgntframe->buf_addr, 0, WLANHDR_OFFSET + TXDESC_OFFSET); |
| |
| pframe = (u8 *)(pmgntframe->buf_addr) + TXDESC_OFFSET; |
| pwlanhdr = (struct ieee80211_hdr *)pframe; |
| |
| fctrl = &pwlanhdr->frame_control; |
| *fctrl = 0; |
| |
| ether_addr_copy(pwlanhdr->addr1, raddr); |
| ether_addr_copy(pwlanhdr->addr2, myid(&padapter->eeprompriv)); |
| ether_addr_copy(pwlanhdr->addr3, raddr); |
| |
| SetSeqNum(pwlanhdr, pmlmeext->mgnt_seq); |
| pmlmeext->mgnt_seq++; |
| SetFrameSubType(pframe, WIFI_ACTION); |
| |
| pframe += sizeof(struct ieee80211_hdr_3addr); |
| pattrib->pktlen = sizeof(struct ieee80211_hdr_3addr); |
| |
| pframe = rtw_set_fixed_ie23a(pframe, 1, &category, &pattrib->pktlen); |
| pframe = rtw_set_fixed_ie23a(pframe, 1, &action, &pattrib->pktlen); |
| pframe = rtw_set_fixed_ie23a(pframe, 4, (unsigned char *)&p2poui, |
| &pattrib->pktlen); |
| pframe = rtw_set_fixed_ie23a(pframe, 1, &oui_subtype, &pattrib->pktlen); |
| pframe = rtw_set_fixed_ie23a(pframe, 1, &dialogToken, &pattrib->pktlen); |
| |
| /* P2P IE Section. */ |
| |
| /* P2P OUI */ |
| p2pielen = 0; |
| p2pie[p2pielen++] = 0x50; |
| p2pie[p2pielen++] = 0x6F; |
| p2pie[p2pielen++] = 0x9A; |
| p2pie[p2pielen++] = 0x09; /* WFA P2P v1.0 */ |
| |
| /* Commented by Albert 20101005 */ |
| /* According to the P2P Specification, the P2P Invitation |
| response frame should contain 5 P2P attributes */ |
| /* 1. Status */ |
| /* 2. Configuration Timeout */ |
| /* 3. Operating Channel (Only GO) */ |
| /* 4. P2P Group BSSID (Only GO) */ |
| /* 5. Channel List */ |
| |
| /* P2P Status */ |
| /* Type: */ |
| p2pie[p2pielen++] = P2P_ATTR_STATUS; |
| |
| /* Length: */ |
| *(u16*) (p2pie + p2pielen) = cpu_to_le16(0x0001); |
| p2pielen += 2; |
| |
| /* Value: */ |
| /* When status code is P2P_STATUS_FAIL_INFO_UNAVAILABLE. */ |
| /* Sent the event receiving the P2P Invitation Req frame |
| to DMP UI. */ |
| /* DMP had to compare the MAC address to find out the profile. */ |
| /* So, the WiFi driver will send the |
| P2P_STATUS_FAIL_INFO_UNAVAILABLE to NB. */ |
| /* If the UI found the corresponding profile, the WiFi driver |
| sends the P2P Invitation Req */ |
| /* to NB to rebuild the persistent group. */ |
| p2pie[p2pielen++] = status_code; |
| |
| /* Configuration Timeout */ |
| /* Type: */ |
| p2pie[p2pielen++] = P2P_ATTR_CONF_TIMEOUT; |
| |
| /* Length: */ |
| *(u16*) (p2pie + p2pielen) = cpu_to_le16(0x0002); |
| p2pielen += 2; |
| |
| /* Value: */ |
| /* 2 seconds needed to be the P2P GO */ |
| p2pie[p2pielen++] = 200; |
| /* 2 seconds needed to be the P2P Client */ |
| p2pie[p2pielen++] = 200; |
| |
| if (status_code == P2P_STATUS_SUCCESS) { |
| if (rtw_p2p_chk_role(pwdinfo, P2P_ROLE_GO)) { |
| /* The P2P Invitation request frame asks this |
| Wi-Fi device to be the P2P GO */ |
| /* In this case, the P2P Invitation response |
| frame should carry the two more P2P attributes. */ |
| /* First one is operating channel attribute. */ |
| /* Second one is P2P Group BSSID attribute. */ |
| |
| /* Operating Channel */ |
| /* Type: */ |
| p2pie[p2pielen++] = P2P_ATTR_OPERATING_CH; |
| |
| /* Length: */ |
| *(u16*) (p2pie + p2pielen) = cpu_to_le16(0x0005); |
| p2pielen += 2; |
| |
| /* Value: */ |
| /* Country String */ |
| p2pie[p2pielen++] = 'X'; |
| p2pie[p2pielen++] = 'X'; |
| |
| /* The third byte should be set to 0x04. */ |
| /* Described in the "Operating Channel Attribute" |
| section. */ |
| p2pie[p2pielen++] = 0x04; |
| |
| /* Operating Class */ |
| /* Copy from SD7 */ |
| p2pie[p2pielen++] = 0x51; |
| |
| /* Channel Number */ |
| /* operating channel number */ |
| p2pie[p2pielen++] = pwdinfo->operating_channel; |
| |
| /* P2P Group BSSID */ |
| /* Type: */ |
| p2pie[p2pielen++] = P2P_ATTR_GROUP_BSSID; |
| |
| /* Length: */ |
| *(u16*) (p2pie + p2pielen) = cpu_to_le16(ETH_ALEN); |
| p2pielen += 2; |
| |
| /* Value: */ |
| /* P2P Device Address for GO */ |
| memcpy(p2pie + p2pielen, myid(&padapter->eeprompriv), |
| ETH_ALEN); |
| p2pielen += ETH_ALEN; |
| } |
| |
| /* Channel List */ |
| /* Type: */ |
| p2pie[p2pielen++] = P2P_ATTR_CH_LIST; |
| |
| /* Length: */ |
| /* Country String(3) */ |
| /* + (Operating Class (1) + Number of Channels(1)) * |
| Operation Classes (?) */ |
| /* + number of channels in all classes */ |
| len_channellist_attr = 3 + |
| (1 + 1) * (u16)pmlmeext->channel_list.reg_classes + |
| get_reg_classes_full_count(pmlmeext->channel_list); |
| |
| *(u16*) (p2pie + p2pielen) = cpu_to_le16(len_channellist_attr); |
| p2pielen += 2; |
| |
| /* Value: */ |
| /* Country String */ |
| p2pie[p2pielen++] = 'X'; |
| p2pie[p2pielen++] = 'X'; |
| |
| /* The third byte should be set to 0x04. */ |
| /* Described in the "Operating Channel Attribute" section. */ |
| p2pie[p2pielen++] = 0x04; |
| |
| /* Channel Entry List */ |
| for (j = 0; j < pmlmeext->channel_list.reg_classes; j++) { |
| /* Operating Class */ |
| p2pie[p2pielen++] = |
| pmlmeext->channel_list.reg_class[j].reg_class; |
| |
| /* Number of Channels */ |
| p2pie[p2pielen++] = |
| pmlmeext->channel_list.reg_class[j].channels; |
| |
| /* Channel List */ |
| for (i = 0; |
| i < pmlmeext->channel_list.reg_class[j].channels; |
| i++) { |
| p2pie[p2pielen++] = pmlmeext->channel_list.reg_class[j].channel[i]; |
| } |
| } |
| } |
| |
| pframe = rtw_set_ie23a(pframe, _VENDOR_SPECIFIC_IE_, p2pielen, |
| (unsigned char *)p2pie, &pattrib->pktlen); |
| |
| #ifdef CONFIG_8723AU_P2P |
| wfdielen = build_invitation_resp_wfd_ie(pwdinfo, pframe); |
| pframe += wfdielen; |
| pattrib->pktlen += wfdielen; |
| #endif /* CONFIG_8723AU_P2P */ |
| |
| pattrib->last_txcmdsz = pattrib->pktlen; |
| |
| dump_mgntframe23a(padapter, pmgntframe); |
| |
| return; |
| } |
| |
| void issue_p2p_provision_request23a(struct rtw_adapter *padapter, u8 *pssid, |
| u8 ussidlen, u8 *pdev_raddr) |
| { |
| unsigned char category = WLAN_CATEGORY_PUBLIC; |
| u8 action = P2P_PUB_ACTION_ACTION; |
| u8 dialogToken = 1; |
| u32 p2poui = cpu_to_be32(P2POUI); |
| u8 oui_subtype = P2P_PROVISION_DISC_REQ; |
| u8 wpsie[100] = { 0x00 }; |
| u8 wpsielen = 0; |
| u32 p2pielen = 0; |
| #ifdef CONFIG_8723AU_P2P |
| u32 wfdielen = 0; |
| #endif /* CONFIG_8723AU_P2P */ |
| struct xmit_frame *pmgntframe; |
| struct pkt_attrib *pattrib; |
| unsigned char *pframe; |
| struct ieee80211_hdr *pwlanhdr; |
| unsigned short *fctrl; |
| struct xmit_priv *pxmitpriv = &padapter->xmitpriv; |
| struct mlme_ext_priv *pmlmeext = &padapter->mlmeextpriv; |
| struct wifidirect_info *pwdinfo = &padapter->wdinfo; |
| |
| if ((pmgntframe = alloc_mgtxmitframe23a(pxmitpriv)) == NULL) |
| return; |
| |
| DBG_8723A("[%s] In\n", __func__); |
| /* update attribute */ |
| pattrib = &pmgntframe->attrib; |
| update_mgntframe_attrib23a(padapter, pattrib); |
| |
| memset(pmgntframe->buf_addr, 0, WLANHDR_OFFSET + TXDESC_OFFSET); |
| |
| pframe = (u8 *)(pmgntframe->buf_addr) + TXDESC_OFFSET; |
| pwlanhdr = (struct ieee80211_hdr *)pframe; |
| |
| fctrl = &pwlanhdr->frame_control; |
| *fctrl = 0; |
| |
| ether_addr_copy(pwlanhdr->addr1, pdev_raddr); |
| ether_addr_copy(pwlanhdr->addr2, myid(&padapter->eeprompriv)); |
| ether_addr_copy(pwlanhdr->addr3, pdev_raddr); |
| |
| SetSeqNum(pwlanhdr, pmlmeext->mgnt_seq); |
| pmlmeext->mgnt_seq++; |
| SetFrameSubType(pframe, WIFI_ACTION); |
| |
| pframe += sizeof(struct ieee80211_hdr_3addr); |
| pattrib->pktlen = sizeof(struct ieee80211_hdr_3addr); |
| |
| pframe = rtw_set_fixed_ie23a(pframe, 1, &category, &pattrib->pktlen); |
| pframe = rtw_set_fixed_ie23a(pframe, 1, &action, &pattrib->pktlen); |
| pframe = rtw_set_fixed_ie23a(pframe, 4, (unsigned char *)&p2poui, |
| &pattrib->pktlen); |
| pframe = rtw_set_fixed_ie23a(pframe, 1, &oui_subtype, &pattrib->pktlen); |
| pframe = rtw_set_fixed_ie23a(pframe, 1, &dialogToken, &pattrib->pktlen); |
| |
| p2pielen = build_prov_disc_request_p2p_ie23a(pwdinfo, pframe, pssid, |
| ussidlen, pdev_raddr); |
| |
| pframe += p2pielen; |
| pattrib->pktlen += p2pielen; |
| |
| wpsielen = 0; |
| /* WPS OUI */ |
| *(u32*) (wpsie) = cpu_to_be32(WPSOUI); |
| wpsielen += 4; |
| |
| /* WPS version */ |
| /* Type: */ |
| *(u16*) (wpsie + wpsielen) = cpu_to_be16(WPS_ATTR_VER1); |
| wpsielen += 2; |
| |
| /* Length: */ |
| *(u16*) (wpsie + wpsielen) = cpu_to_be16(0x0001); |
| wpsielen += 2; |
| |
| /* Value: */ |
| wpsie[wpsielen++] = WPS_VERSION_1; /* Version 1.0 */ |
| |
| /* Config Method */ |
| /* Type: */ |
| *(u16*) (wpsie + wpsielen) = cpu_to_be16(WPS_ATTR_CONF_METHOD); |
| wpsielen += 2; |
| |
| /* Length: */ |
| *(u16*) (wpsie + wpsielen) = cpu_to_be16(0x0002); |
| wpsielen += 2; |
| |
| /* Value: */ |
| *(u16*) (wpsie + wpsielen) = cpu_to_be16(pwdinfo->tx_prov_disc_info.wps_config_method_request); |
| wpsielen += 2; |
| |
| pframe = rtw_set_ie23a(pframe, _VENDOR_SPECIFIC_IE_, wpsielen, |
| (unsigned char *) wpsie, &pattrib->pktlen); |
| |
| #ifdef CONFIG_8723AU_P2P |
| wfdielen = build_provdisc_req_wfd_ie(pwdinfo, pframe); |
| pframe += wfdielen; |
| pattrib->pktlen += wfdielen; |
| #endif /* CONFIG_8723AU_P2P */ |
| |
| pattrib->last_txcmdsz = pattrib->pktlen; |
| |
| dump_mgntframe23a(padapter, pmgntframe); |
| |
| return; |
| } |
| |
| static u8 is_matched_in_profilelist(u8 *peermacaddr, |
| struct profile_info *profileinfo) |
| { |
| u8 i, match_result = 0; |
| |
| DBG_8723A("[%s] peermac = %.2X %.2X %.2X %.2X %.2X %.2X\n", __func__, |
| peermacaddr[0], peermacaddr[1], peermacaddr[2], |
| peermacaddr[3], peermacaddr[4], peermacaddr[5]); |
| |
| for (i = 0; i < P2P_MAX_PERSISTENT_GROUP_NUM; i++, profileinfo++) { |
| DBG_8723A("[%s] profileinfo_mac = %.2X %.2X %.2X %.2X %.2X " |
| "%.2X\n", __func__, profileinfo->peermac[0], |
| profileinfo->peermac[1], profileinfo->peermac[2], |
| profileinfo->peermac[3], profileinfo->peermac[4], |
| profileinfo->peermac[5]); |
| if (ether_addr_equal(peermacaddr, profileinfo->peermac)) { |
| match_result = 1; |
| DBG_8723A("[%s] Match!\n", __func__); |
| break; |
| } |
| } |
| |
| return match_result; |
| } |
| |
| void issue_probersp23a_p2p23a(struct rtw_adapter *padapter, unsigned char *da) |
| { |
| struct xmit_frame *pmgntframe; |
| struct pkt_attrib *pattrib; |
| unsigned char *pframe; |
| struct ieee80211_hdr *pwlanhdr; |
| unsigned short *fctrl; |
| unsigned char *mac; |
| struct xmit_priv *pxmitpriv = &padapter->xmitpriv; |
| struct mlme_ext_priv *pmlmeext = &padapter->mlmeextpriv; |
| struct mlme_priv *pmlmepriv = &padapter->mlmepriv; |
| u16 beacon_interval = 100; |
| u16 capInfo = 0; |
| struct wifidirect_info *pwdinfo = &padapter->wdinfo; |
| u8 wpsie[255] = { 0x00 }; |
| u32 wpsielen = 0, p2pielen = 0; |
| #ifdef CONFIG_8723AU_P2P |
| u32 wfdielen = 0; |
| #endif /* CONFIG_8723AU_P2P */ |
| struct cfg80211_wifidirect_info *pcfg80211_wdinfo = |
| &padapter->cfg80211_wdinfo; |
| struct ieee80211_channel *ieee_ch = |
| &pcfg80211_wdinfo->remain_on_ch_channel; |
| u8 listen_channel = |
| (u8)ieee80211_frequency_to_channel(ieee_ch->center_freq); |
| |
| /* DBG_8723A("%s\n", __func__); */ |
| |
| if ((pmgntframe = alloc_mgtxmitframe23a(pxmitpriv)) == NULL) |
| { |
| return; |
| } |
| |
| /* update attribute */ |
| pattrib = &pmgntframe->attrib; |
| update_mgntframe_attrib23a(padapter, pattrib); |
| |
| memset(pmgntframe->buf_addr, 0, WLANHDR_OFFSET + TXDESC_OFFSET); |
| |
| pframe = (u8 *)(pmgntframe->buf_addr) + TXDESC_OFFSET; |
| pwlanhdr = (struct ieee80211_hdr *)pframe; |
| |
| mac = myid(&padapter->eeprompriv); |
| |
| fctrl = &pwlanhdr->frame_control; |
| *fctrl = 0; |
| ether_addr_copy(pwlanhdr->addr1, da); |
| ether_addr_copy(pwlanhdr->addr2, mac); |
| |
| /* Use the device address for BSSID field. */ |
| ether_addr_copy(pwlanhdr->addr3, mac); |
| |
| SetSeqNum(pwlanhdr, pmlmeext->mgnt_seq); |
| pmlmeext->mgnt_seq++; |
| SetFrameSubType(fctrl, WIFI_PROBERSP); |
| |
| pattrib->hdrlen = sizeof(struct ieee80211_hdr_3addr); |
| pattrib->pktlen = pattrib->hdrlen; |
| pframe += pattrib->hdrlen; |
| |
| /* timestamp will be inserted by hardware */ |
| pframe += 8; |
| pattrib->pktlen += 8; |
| |
| /* beacon interval: 2 bytes */ |
| memcpy(pframe, (unsigned char *) &beacon_interval, 2); |
| pframe += 2; |
| pattrib->pktlen += 2; |
| |
| /* capability info: 2 bytes */ |
| /* ESS and IBSS bits must be 0 (defined in the 3.1.2.1.1 of |
| WiFi Direct Spec) */ |
| capInfo |= cap_ShortPremble; |
| capInfo |= cap_ShortSlot; |
| |
| memcpy(pframe, (unsigned char *) &capInfo, 2); |
| pframe += 2; |
| pattrib->pktlen += 2; |
| |
| /* SSID */ |
| pframe = rtw_set_ie23a(pframe, _SSID_IE_, 7, pwdinfo->p2p_wildcard_ssid, |
| &pattrib->pktlen); |
| |
| /* supported rates... */ |
| /* Use the OFDM rate in the P2P probe response frame. |
| (6(B), 9(B), 12, 18, 24, 36, 48, 54) */ |
| pframe = rtw_set_ie23a(pframe, _SUPPORTEDRATES_IE_, 8, |
| pwdinfo->support_rate, &pattrib->pktlen); |
| |
| /* DS parameter set */ |
| if (wdev_to_priv(padapter->rtw_wdev)->p2p_enabled && |
| listen_channel != 0) { |
| pframe = rtw_set_ie23a(pframe, _DSSET_IE_, 1, (unsigned char *) |
| &listen_channel, &pattrib->pktlen); |
| } else { |
| pframe = rtw_set_ie23a(pframe, _DSSET_IE_, 1, (unsigned char *) |
| &pwdinfo->listen_channel, |
| &pattrib->pktlen); |
| } |
| |
| if (wdev_to_priv(padapter->rtw_wdev)->p2p_enabled) { |
| if (pmlmepriv->wps_probe_resp_ie && |
| pmlmepriv->p2p_probe_resp_ie) { |
| /* WPS IE */ |
| memcpy(pframe, pmlmepriv->wps_probe_resp_ie, |
| pmlmepriv->wps_probe_resp_ie_len); |
| pattrib->pktlen += pmlmepriv->wps_probe_resp_ie_len; |
| pframe += pmlmepriv->wps_probe_resp_ie_len; |
| |
| /* P2P IE */ |
| memcpy(pframe, pmlmepriv->p2p_probe_resp_ie, |
| pmlmepriv->p2p_probe_resp_ie_len); |
| pattrib->pktlen += pmlmepriv->p2p_probe_resp_ie_len; |
| pframe += pmlmepriv->p2p_probe_resp_ie_len; |
| } |
| } else { |
| |
| /* Todo: WPS IE */ |
| /* Noted by Albert 20100907 */ |
| /* According to the WPS specification, all the WPS |
| attribute is presented by Big Endian. */ |
| |
| wpsielen = 0; |
| /* WPS OUI */ |
| *(u32*) (wpsie) = cpu_to_be32(WPSOUI); |
| wpsielen += 4; |
| |
| /* WPS version */ |
| /* Type: */ |
| *(u16*) (wpsie + wpsielen) = cpu_to_be16(WPS_ATTR_VER1); |
| wpsielen += 2; |
| |
| /* Length: */ |
| *(u16*) (wpsie + wpsielen) = cpu_to_be16(0x0001); |
| wpsielen += 2; |
| |
| /* Value: */ |
| wpsie[wpsielen++] = WPS_VERSION_1; /* Version 1.0 */ |
| |
| /* WiFi Simple Config State */ |
| /* Type: */ |
| *(u16*) (wpsie + wpsielen) = |
| cpu_to_be16(WPS_ATTR_SIMPLE_CONF_STATE); |
| wpsielen += 2; |
| |
| /* Length: */ |
| *(u16*) (wpsie + wpsielen) = cpu_to_be16(0x0001); |
| wpsielen += 2; |
| |
| /* Value: */ |
| wpsie[wpsielen++] = WPS_WSC_STATE_NOT_CONFIG; |
| |
| /* Response Type */ |
| /* Type: */ |
| *(u16*) (wpsie + wpsielen) = cpu_to_be16(WPS_ATTR_RESP_TYPE); |
| wpsielen += 2; |
| |
| /* Length: */ |
| *(u16*) (wpsie + wpsielen) = cpu_to_be16(0x0001); |
| wpsielen += 2; |
| |
| /* Value: */ |
| wpsie[wpsielen++] = WPS_RESPONSE_TYPE_8021X; |
| |
| /* UUID-E */ |
| /* Type: */ |
| *(u16*) (wpsie + wpsielen) = cpu_to_be16(WPS_ATTR_UUID_E); |
| wpsielen += 2; |
| |
| /* Length: */ |
| *(u16*) (wpsie + wpsielen) = cpu_to_be16(0x0010); |
| wpsielen += 2; |
| |
| /* Value: */ |
| memcpy(wpsie + wpsielen, myid(&padapter->eeprompriv), ETH_ALEN); |
| wpsielen += 0x10; |
| |
| /* Manufacturer */ |
| /* Type: */ |
| *(u16*) (wpsie + wpsielen) = cpu_to_be16(WPS_ATTR_MANUFACTURER); |
| wpsielen += 2; |
| |
| /* Length: */ |
| *(u16*) (wpsie + wpsielen) = cpu_to_be16(0x0007); |
| wpsielen += 2; |
| |
| /* Value: */ |
| memcpy(wpsie + wpsielen, "Realtek", 7); |
| wpsielen += 7; |
| |
| /* Model Name */ |
| /* Type: */ |
| *(u16*) (wpsie + wpsielen) = cpu_to_be16(WPS_ATTR_MODEL_NAME); |
| wpsielen += 2; |
| |
| /* Length: */ |
| *(u16*) (wpsie + wpsielen) = cpu_to_be16(0x0006); |
| wpsielen += 2; |
| |
| /* Value: */ |
| memcpy(wpsie + wpsielen, "8192CU", 6); |
| wpsielen += 6; |
| |
| /* Model Number */ |
| /* Type: */ |
| *(u16*) (wpsie + wpsielen) = cpu_to_be16(WPS_ATTR_MODEL_NUMBER); |
| wpsielen += 2; |
| |
| /* Length: */ |
| *(u16*) (wpsie + wpsielen) = cpu_to_be16(0x0001); |
| wpsielen += 2; |
| |
| /* Value: */ |
| wpsie[ wpsielen++ ] = 0x31; /* character 1 */ |
| |
| /* Serial Number */ |
| /* Type: */ |
| *(u16*) (wpsie + wpsielen) = |
| cpu_to_be16(WPS_ATTR_SERIAL_NUMBER); |
| wpsielen += 2; |
| |
| /* Length: */ |
| *(u16*) (wpsie + wpsielen) = cpu_to_be16(ETH_ALEN); |
| wpsielen += 2; |
| |
| /* Value: */ |
| memcpy(wpsie + wpsielen, "123456", ETH_ALEN); |
| wpsielen += ETH_ALEN; |
| |
| /* Primary Device Type */ |
| /* Type: */ |
| *(u16*) (wpsie + wpsielen) = |
| cpu_to_be16(WPS_ATTR_PRIMARY_DEV_TYPE); |
| wpsielen += 2; |
| |
| /* Length: */ |
| *(u16*) (wpsie + wpsielen) = cpu_to_be16(0x0008); |
| wpsielen += 2; |
| |
| /* Value: */ |
| /* Category ID */ |
| *(u16*) (wpsie + wpsielen) = |
| cpu_to_be16(WPS_PDT_CID_MULIT_MEDIA); |
| wpsielen += 2; |
| |
| /* OUI */ |
| *(u32*) (wpsie + wpsielen) = cpu_to_be32(WPSOUI); |
| wpsielen += 4; |
| |
| /* Sub Category ID */ |
| *(u16*) (wpsie + wpsielen) = |
| cpu_to_be16(WPS_PDT_SCID_MEDIA_SERVER); |
| wpsielen += 2; |
| |
| /* Device Name */ |
| /* Type: */ |
| *(u16*) (wpsie + wpsielen) = cpu_to_be16(WPS_ATTR_DEVICE_NAME); |
| wpsielen += 2; |
| |
| /* Length: */ |
| *(u16*) (wpsie + wpsielen) = |
| cpu_to_be16(pwdinfo->device_name_len); |
| wpsielen += 2; |
| |
| /* Value: */ |
| if (pwdinfo->device_name_len) { |
| memcpy(wpsie + wpsielen, pwdinfo->device_name, |
| pwdinfo->device_name_len); |
| wpsielen += pwdinfo->device_name_len; |
| } |
| |
| /* Config Method */ |
| /* Type: */ |
| *(u16*) (wpsie + wpsielen) = cpu_to_be16(WPS_ATTR_CONF_METHOD); |
| wpsielen += 2; |
| |
| /* Length: */ |
| *(u16*) (wpsie + wpsielen) = cpu_to_be16(0x0002); |
| wpsielen += 2; |
| |
| /* Value: */ |
| *(u16*) (wpsie + wpsielen) = |
| cpu_to_be16(pwdinfo->supported_wps_cm); |
| wpsielen += 2; |
| |
| pframe = rtw_set_ie23a(pframe, _VENDOR_SPECIFIC_IE_, wpsielen, |
| (unsigned char *)wpsie, |
| &pattrib->pktlen); |
| |
| p2pielen = build_probe_resp_p2p_ie23a(pwdinfo, pframe); |
| pframe += p2pielen; |
| pattrib->pktlen += p2pielen; |
| } |
| |
| #ifdef CONFIG_8723AU_P2P |
| if (pwdinfo->wfd_info->wfd_enable) { |
| wfdielen = build_probe_resp_wfd_ie(pwdinfo, pframe, 0); |
| pframe += wfdielen; |
| pattrib->pktlen += wfdielen; |
| } else if (pmlmepriv->wfd_probe_resp_ie && |
| pmlmepriv->wfd_probe_resp_ie_len > 0) { |
| /* WFD IE */ |
| memcpy(pframe, pmlmepriv->wfd_probe_resp_ie, |
| pmlmepriv->wfd_probe_resp_ie_len); |
| pattrib->pktlen += pmlmepriv->wfd_probe_resp_ie_len; |
| pframe += pmlmepriv->wfd_probe_resp_ie_len; |
| } |
| #endif /* CONFIG_8723AU_P2P */ |
| |
| pattrib->last_txcmdsz = pattrib->pktlen; |
| |
| dump_mgntframe23a(padapter, pmgntframe); |
| |
| return; |
| } |
| |
| static int _issue23a_probereq_p2p(struct rtw_adapter *padapter, u8 *da, |
| int wait_ack) |
| { |
| int ret = _FAIL; |
| struct xmit_frame *pmgntframe; |
| struct pkt_attrib *pattrib; |
| unsigned char *pframe; |
| struct ieee80211_hdr *pwlanhdr; |
| unsigned short *fctrl; |
| unsigned char *mac; |
| struct xmit_priv *pxmitpriv = &padapter->xmitpriv; |
| struct mlme_ext_priv *pmlmeext = &padapter->mlmeextpriv; |
| u8 bc_addr[] = {0xff, 0xff, 0xff, 0xff, 0xff, 0xff}; |
| struct wifidirect_info *pwdinfo = &padapter->wdinfo; |
| u8 wpsie[255] = {0x00}, p2pie[255] = {0x00}; |
| u16 wpsielen = 0, p2pielen = 0; |
| #ifdef CONFIG_8723AU_P2P |
| u32 wfdielen = 0; |
| #endif /* CONFIG_8723AU_P2P */ |
| struct mlme_priv *pmlmepriv = &padapter->mlmepriv; |
| |
| if ((pmgntframe = alloc_mgtxmitframe23a(pxmitpriv)) == NULL) |
| goto exit; |
| |
| /* update attribute */ |
| pattrib = &pmgntframe->attrib; |
| update_mgntframe_attrib23a(padapter, pattrib); |
| |
| memset(pmgntframe->buf_addr, 0, WLANHDR_OFFSET + TXDESC_OFFSET); |
| |
| pframe = (u8 *)(pmgntframe->buf_addr) + TXDESC_OFFSET; |
| pwlanhdr = (struct ieee80211_hdr *)pframe; |
| |
| mac = myid(&padapter->eeprompriv); |
| |
| fctrl = &pwlanhdr->frame_control; |
| *fctrl = 0; |
| |
| if (da) { |
| ether_addr_copy(pwlanhdr->addr1, da); |
| ether_addr_copy(pwlanhdr->addr3, da); |
| } else { |
| if ((pwdinfo->p2p_info.scan_op_ch_only) || |
| (pwdinfo->rx_invitereq_info.scan_op_ch_only)) { |
| /* This two flags will be set when this is |
| only the P2P client mode. */ |
| ether_addr_copy(pwlanhdr->addr1, |
| pwdinfo->p2p_peer_interface_addr); |
| ether_addr_copy(pwlanhdr->addr3, |
| pwdinfo->p2p_peer_interface_addr); |
| } else { |
| /* broadcast probe request frame */ |
| ether_addr_copy(pwlanhdr->addr1, bc_addr); |
| ether_addr_copy(pwlanhdr->addr3, bc_addr); |
| } |
| } |
| ether_addr_copy(pwlanhdr->addr2, mac); |
| |
| SetSeqNum(pwlanhdr, pmlmeext->mgnt_seq); |
| pmlmeext->mgnt_seq++; |
| SetFrameSubType(pframe, WIFI_PROBEREQ); |
| |
| pframe += sizeof (struct ieee80211_hdr_3addr); |
| pattrib->pktlen = sizeof (struct ieee80211_hdr_3addr); |
| |
| if (rtw_p2p_chk_state(pwdinfo, P2P_STATE_TX_PROVISION_DIS_REQ)) { |
| pframe = rtw_set_ie23a(pframe, _SSID_IE_, |
| pwdinfo->tx_prov_disc_info.ssid.ssid_len, |
| pwdinfo->tx_prov_disc_info.ssid.ssid, |
| &pattrib->pktlen); |
| } else { |
| pframe = rtw_set_ie23a(pframe, _SSID_IE_, |
| P2P_WILDCARD_SSID_LEN, |
| pwdinfo->p2p_wildcard_ssid, |
| &pattrib->pktlen); |
| } |
| /* Use the OFDM rate in the P2P probe request frame. |
| (6(B), 9(B), 12(B), 24(B), 36, 48, 54) */ |
| pframe = rtw_set_ie23a(pframe, _SUPPORTEDRATES_IE_, 8, |
| pwdinfo->support_rate, &pattrib->pktlen); |
| |
| if (wdev_to_priv(padapter->rtw_wdev)->p2p_enabled) { |
| if (pmlmepriv->wps_probe_req_ie && |
| pmlmepriv->p2p_probe_req_ie) { |
| /* WPS IE */ |
| memcpy(pframe, pmlmepriv->wps_probe_req_ie, |
| pmlmepriv->wps_probe_req_ie_len); |
| pattrib->pktlen += pmlmepriv->wps_probe_req_ie_len; |
| pframe += pmlmepriv->wps_probe_req_ie_len; |
| |
| /* P2P IE */ |
| memcpy(pframe, pmlmepriv->p2p_probe_req_ie, |
| pmlmepriv->p2p_probe_req_ie_len); |
| pattrib->pktlen += pmlmepriv->p2p_probe_req_ie_len; |
| pframe += pmlmepriv->p2p_probe_req_ie_len; |
| } |
| } else { |
| |
| /* WPS IE */ |
| /* Noted by Albert 20110221 */ |
| /* According to the WPS specification, all the WPS |
| attribute is presented by Big Endian. */ |
| |
| wpsielen = 0; |
| /* WPS OUI */ |
| *(u32*) (wpsie) = cpu_to_be32(WPSOUI); |
| wpsielen += 4; |
| |
| /* WPS version */ |
| /* Type: */ |
| *(u16*) (wpsie + wpsielen) = cpu_to_be16(WPS_ATTR_VER1); |
| wpsielen += 2; |
| |
| /* Length: */ |
| *(u16*) (wpsie + wpsielen) = cpu_to_be16(0x0001); |
| wpsielen += 2; |
| |
| /* Value: */ |
| wpsie[wpsielen++] = WPS_VERSION_1; /* Version 1.0 */ |
| |
| if (pmlmepriv->wps_probe_req_ie == NULL) { |
| /* UUID-E */ |
| /* Type: */ |
| *(u16*) (wpsie + wpsielen) = |
| cpu_to_be16(WPS_ATTR_UUID_E); |
| wpsielen += 2; |
| |
| /* Length: */ |
| *(u16*) (wpsie + wpsielen) = cpu_to_be16(0x0010); |
| wpsielen += 2; |
| |
| /* Value: */ |
| memcpy(wpsie + wpsielen, myid(&padapter->eeprompriv), |
| ETH_ALEN); |
| wpsielen += 0x10; |
| |
| /* Config Method */ |
| /* Type: */ |
| *(u16*) (wpsie + wpsielen) = |
| cpu_to_be16(WPS_ATTR_CONF_METHOD); |
| wpsielen += 2; |
| |
| /* Length: */ |
| *(u16*) (wpsie + wpsielen) = cpu_to_be16(0x0002); |
| wpsielen += 2; |
| |
| /* Value: */ |
| *(u16*) (wpsie + wpsielen) = |
| cpu_to_be16(pwdinfo->supported_wps_cm); |
| wpsielen += 2; |
| } |
| |
| /* Device Name */ |
| /* Type: */ |
| *(u16*) (wpsie + wpsielen) = cpu_to_be16(WPS_ATTR_DEVICE_NAME); |
| wpsielen += 2; |
| |
| /* Length: */ |
| *(u16*) (wpsie + wpsielen) = |
| cpu_to_be16(pwdinfo->device_name_len); |
| wpsielen += 2; |
| |
| /* Value: */ |
| memcpy(wpsie + wpsielen, pwdinfo->device_name, |
| pwdinfo->device_name_len); |
| wpsielen += pwdinfo->device_name_len; |
| |
| /* Primary Device Type */ |
| /* Type: */ |
| *(u16*) (wpsie + wpsielen) = |
| cpu_to_be16(WPS_ATTR_PRIMARY_DEV_TYPE); |
| wpsielen += 2; |
| |
| /* Length: */ |
| *(u16*) (wpsie + wpsielen) = cpu_to_be16(0x0008); |
| wpsielen += 2; |
| |
| /* Value: */ |
| /* Category ID */ |
| *(u16*) (wpsie + wpsielen) = cpu_to_be16(WPS_PDT_CID_RTK_WIDI); |
| wpsielen += 2; |
| |
| /* OUI */ |
| *(u32*) (wpsie + wpsielen) = cpu_to_be32(WPSOUI); |
| wpsielen += 4; |
| |
| /* Sub Category ID */ |
| *(u16*) (wpsie + wpsielen) = cpu_to_be16(WPS_PDT_SCID_RTK_DMP); |
| wpsielen += 2; |
| |
| /* Device Password ID */ |
| /* Type: */ |
| *(u16*) (wpsie + wpsielen) = cpu_to_be16(WPS_ATTR_DEVICE_PWID); |
| wpsielen += 2; |
| |
| /* Length: */ |
| *(u16*) (wpsie + wpsielen) = cpu_to_be16(0x0002); |
| wpsielen += 2; |
| |
| /* Value: */ |
| /* Registrar-specified */ |
| *(u16*) (wpsie + wpsielen) = |
| cpu_to_be16(WPS_DPID_REGISTRAR_SPEC); |
| wpsielen += 2; |
| |
| pframe = rtw_set_ie23a(pframe, _VENDOR_SPECIFIC_IE_, wpsielen, |
| (unsigned char *)wpsie, |
| &pattrib->pktlen); |
| |
| /* P2P OUI */ |
| p2pielen = 0; |
| p2pie[p2pielen++] = 0x50; |
| p2pie[p2pielen++] = 0x6F; |
| p2pie[p2pielen++] = 0x9A; |
| p2pie[p2pielen++] = 0x09; /* WFA P2P v1.0 */ |
| |
| /* Commented by Albert 20110221 */ |
| /* According to the P2P Specification, the probe request |
| frame should contain 5 P2P attributes */ |
| /* 1. P2P Capability */ |
| /* 2. P2P Device ID if this probe request wants to |
| find the specific P2P device */ |
| /* 3. Listen Channel */ |
| /* 4. Extended Listen Timing */ |
| /* 5. Operating Channel if this WiFi is working as |
| the group owner now */ |
| |
| /* P2P Capability */ |
| /* Type: */ |
| p2pie[p2pielen++] = P2P_ATTR_CAPABILITY; |
| |
| /* Length: */ |
| *(u16*) (p2pie + p2pielen) = cpu_to_le16(0x0002); |
| p2pielen += 2; |
| |
| /* Value: */ |
| /* Device Capability Bitmap, 1 byte */ |
| p2pie[p2pielen++] = DMP_P2P_DEVCAP_SUPPORT; |
| |
| /* Group Capability Bitmap, 1 byte */ |
| if (pwdinfo->persistent_supported) |
| p2pie[p2pielen++] = P2P_GRPCAP_PERSISTENT_GROUP | |
| DMP_P2P_GRPCAP_SUPPORT; |
| else |
| p2pie[p2pielen++] = DMP_P2P_GRPCAP_SUPPORT; |
| |
| /* Listen Channel */ |
| /* Type: */ |
| p2pie[p2pielen++] = P2P_ATTR_LISTEN_CH; |
| |
| /* Length: */ |
| *(u16*) (p2pie + p2pielen) = cpu_to_le16(0x0005); |
| p2pielen += 2; |
| |
| /* Value: */ |
| /* Country String */ |
| p2pie[p2pielen++] = 'X'; |
| p2pie[p2pielen++] = 'X'; |
| |
| /* The third byte should be set to 0x04. */ |
| /* Described in the "Operating Channel Attribute" section. */ |
| p2pie[p2pielen++] = 0x04; |
| |
| /* Operating Class */ |
| p2pie[p2pielen++] = 0x51; /* Copy from SD7 */ |
| |
| /* Channel Number */ |
| /* listen channel */ |
| p2pie[p2pielen++] = pwdinfo->listen_channel; |
| |
| /* Extended Listen Timing */ |
| /* Type: */ |
| p2pie[p2pielen++] = P2P_ATTR_EX_LISTEN_TIMING; |
| |
| /* Length: */ |
| *(u16*) (p2pie + p2pielen) = cpu_to_le16(0x0004); |
| p2pielen += 2; |
| |
| /* Value: */ |
| /* Availability Period */ |
| *(u16*) (p2pie + p2pielen) = cpu_to_le16(0xFFFF); |
| p2pielen += 2; |
| |
| /* Availability Interval */ |
| *(u16*) (p2pie + p2pielen) = cpu_to_le16(0xFFFF); |
| p2pielen += 2; |
| |
| if (rtw_p2p_chk_role(pwdinfo, P2P_ROLE_GO)) { |
| /* Operating Channel (if this WiFi is working as |
| the group owner now) */ |
| /* Type: */ |
| p2pie[p2pielen++] = P2P_ATTR_OPERATING_CH; |
| |
| /* Length: */ |
| *(u16*) (p2pie + p2pielen) = cpu_to_le16(0x0005); |
| p2pielen += 2; |
| |
| /* Value: */ |
| /* Country String */ |
| p2pie[p2pielen++] = 'X'; |
| p2pie[p2pielen++] = 'X'; |
| |
| /* The third byte should be set to 0x04. */ |
| /* Described in the "Operating Channel Attribute" |
| section. */ |
| p2pie[p2pielen++] = 0x04; |
| |
| /* Operating Class */ |
| p2pie[p2pielen++] = 0x51; /* Copy from SD7 */ |
| |
| /* Channel Number */ |
| /* operating channel number */ |
| p2pie[p2pielen++] = pwdinfo->operating_channel; |
| } |
| |
| pframe = rtw_set_ie23a(pframe, _VENDOR_SPECIFIC_IE_, p2pielen, |
| (unsigned char *)p2pie, |
| &pattrib->pktlen); |
| |
| if (pmlmepriv->wps_probe_req_ie) { |
| /* WPS IE */ |
| memcpy(pframe, pmlmepriv->wps_probe_req_ie, |
| pmlmepriv->wps_probe_req_ie_len); |
| pattrib->pktlen += pmlmepriv->wps_probe_req_ie_len; |
| pframe += pmlmepriv->wps_probe_req_ie_len; |
| } |
| } |
| |
| #ifdef CONFIG_8723AU_P2P |
| if (pwdinfo->wfd_info->wfd_enable) { |
| wfdielen = build_probe_req_wfd_ie(pwdinfo, pframe); |
| pframe += wfdielen; |
| pattrib->pktlen += wfdielen; |
| } else if (pmlmepriv->wfd_probe_req_ie && |
| pmlmepriv->wfd_probe_req_ie_len>0) { |
| /* WFD IE */ |
| memcpy(pframe, pmlmepriv->wfd_probe_req_ie, |
| pmlmepriv->wfd_probe_req_ie_len); |
| pattrib->pktlen += pmlmepriv->wfd_probe_req_ie_len; |
| pframe += pmlmepriv->wfd_probe_req_ie_len; |
| } |
| #endif /* CONFIG_8723AU_P2P */ |
| |
| pattrib->last_txcmdsz = pattrib->pktlen; |
| |
| RT_TRACE(_module_rtl871x_mlme_c_, _drv_info_, |
| ("issuing probe_req, tx_len =%d\n", pattrib->last_txcmdsz)); |
| |
| if (wait_ack) { |
| ret = dump_mgntframe23a_and_wait_ack23a(padapter, pmgntframe); |
| } else { |
| dump_mgntframe23a(padapter, pmgntframe); |
| ret = _SUCCESS; |
| } |
| |
| exit: |
| return ret; |
| } |
| |
| inline void issue23a_probereq_p2p(struct rtw_adapter *adapter, u8 *da) |
| { |
| _issue23a_probereq_p2p(adapter, da, false); |
| } |
| |
| int issue23a_probereq_p2p_ex(struct rtw_adapter *adapter, u8 *da, |
| int try_cnt, int wait_ms) |
| { |
| int ret; |
| int i = 0; |
| unsigned long start = jiffies; |
| |
| do { |
| ret = _issue23a_probereq_p2p(adapter, da, |
| wait_ms > 0 ? true : false); |
| |
| i++; |
| |
| if (adapter->bDriverStopped || adapter->bSurpriseRemoved) |
| break; |
| |
| if (i < try_cnt && wait_ms > 0 && ret == _FAIL) |
| msleep(wait_ms); |
| |
| } while ((i < try_cnt) && ((ret == _FAIL) || (wait_ms == 0))); |
| |
| if (ret != _FAIL) { |
| ret = _SUCCESS; |
| goto exit; |
| } |
| |
| if (try_cnt && wait_ms) { |
| if (da) |
| DBG_8723A(FUNC_ADPT_FMT" to "MAC_FMT", ch:%u%s, %d/%d " |
| "in %u ms\n", FUNC_ADPT_ARG(adapter), |
| MAC_ARG(da), rtw_get_oper_ch23a(adapter), |
| ret == _SUCCESS?", acked":"", i, try_cnt, |
| jiffies_to_msecs(jiffies - start)); |
| else |
| DBG_8723A(FUNC_ADPT_FMT", ch:%u%s, %d/%d in %u ms\n", |
| FUNC_ADPT_ARG(adapter), |
| rtw_get_oper_ch23a(adapter), |
| ret == _SUCCESS?", acked":"", i, try_cnt, |
| jiffies_to_msecs(jiffies - start)); |
| } |
| exit: |
| return ret; |
| } |
| |
| #endif /* CONFIG_8723AU_P2P */ |
| |
| static s32 rtw_action_public_decache(struct recv_frame *recv_frame, s32 token) |
| { |
| struct rtw_adapter *adapter = recv_frame->adapter; |
| struct mlme_ext_priv *mlmeext = &adapter->mlmeextpriv; |
| struct sk_buff *skb = recv_frame->pkt; |
| struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data; |
| u16 seq_ctrl; |
| |
| seq_ctrl = ((recv_frame->attrib.seq_num&0xffff) << 4) | |
| (recv_frame->attrib.frag_num & 0xf); |
| |
| if (ieee80211_has_retry(hdr->frame_control)) { |
| if (token >= 0) { |
| if ((seq_ctrl == mlmeext->action_public_rxseq) && |
| (token == mlmeext->action_public_dialog_token)) { |
| DBG_8723A(FUNC_ADPT_FMT" seq_ctrl = 0x%x, " |
| "rxseq = 0x%x, token:%d\n", |
| FUNC_ADPT_ARG(adapter), seq_ctrl, |
| mlmeext->action_public_rxseq, token); |
| return _FAIL; |
| } |
| } else { |
| if (seq_ctrl == mlmeext->action_public_rxseq) { |
| DBG_8723A(FUNC_ADPT_FMT" seq_ctrl = 0x%x, " |
| "rxseq = 0x%x\n", |
| FUNC_ADPT_ARG(adapter), seq_ctrl, |
| mlmeext->action_public_rxseq); |
| return _FAIL; |
| } |
| } |
| } |
| |
| mlmeext->action_public_rxseq = seq_ctrl; |
| |
| if (token >= 0) |
| mlmeext->action_public_dialog_token = token; |
| |
| return _SUCCESS; |
| } |
| |
| static unsigned int on_action_public23a_p2p(struct recv_frame *precv_frame) |
| { |
| struct sk_buff *skb = precv_frame->pkt; |
| u8 *pframe = skb->data; |
| u8 *frame_body; |
| u8 dialogToken = 0; |
| #ifdef CONFIG_8723AU_P2P |
| struct rtw_adapter *padapter = precv_frame->adapter; |
| struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data; |
| uint len = skb->len; |
| u8 *p2p_ie; |
| u32 p2p_ielen; |
| struct wifidirect_info *pwdinfo = &padapter->wdinfo; |
| u8 result = P2P_STATUS_SUCCESS; |
| #endif /* CONFIG_8723AU_P2P */ |
| |
| frame_body = (unsigned char *) |
| (pframe + sizeof(struct ieee80211_hdr_3addr)); |
| |
| dialogToken = frame_body[7]; |
| |
| if (rtw_action_public_decache(precv_frame, dialogToken) == _FAIL) |
| return _FAIL; |
| |
| #ifdef CONFIG_8723AU_P2P |
| del_timer_sync(&pwdinfo->reset_ch_sitesurvey); |
| if (wdev_to_priv(padapter->rtw_wdev)->p2p_enabled) { |
| rtw_cfg80211_rx_p2p_action_public(padapter, pframe, len); |
| } else { |
| /* Do nothing if the driver doesn't enable the P2P function. */ |
| if (rtw_p2p_chk_state(pwdinfo, P2P_STATE_NONE) || rtw_p2p_chk_state(pwdinfo, P2P_STATE_IDLE)) |
| return _SUCCESS; |
| |
| len -= sizeof(struct ieee80211_hdr_3addr); |
| |
| switch (frame_body[ 6 ])/* OUI Subtype */ |
| { |
| case P2P_GO_NEGO_REQ: |
| DBG_8723A("[%s] Got GO Nego Req Frame\n", __func__); |
| memset(&pwdinfo->groupid_info, 0x00, sizeof(struct group_id_info)); |
| |
| if (rtw_p2p_chk_state(pwdinfo, P2P_STATE_RX_PROVISION_DIS_REQ)) |
| { |
| rtw_p2p_set_state(pwdinfo, rtw_p2p_pre_state(pwdinfo)); |
| } |
| |
| if (rtw_p2p_chk_state(pwdinfo, P2P_STATE_GONEGO_FAIL)) |
| { |
| /* Commented by Albert 20110526 */ |
| /* In this case, this means the previous nego fail doesn't be reset yet. */ |
| del_timer_sync(&pwdinfo->restore_p2p_state_timer); |
| /* Restore the previous p2p state */ |
| rtw_p2p_set_state(pwdinfo, rtw_p2p_pre_state(pwdinfo)); |
| DBG_8723A("[%s] Restore the previous p2p state to %d\n", __func__, rtw_p2p_state(pwdinfo)); |
| } |
| |
| /* Commented by Kurt 20110902 */ |
| /* Add if statement to avoid receiving duplicate prov disc req. such that pre_p2p_state would be covered. */ |
| if (!rtw_p2p_chk_state(pwdinfo, P2P_STATE_GONEGO_ING)) |
| rtw_p2p_set_pre_state(pwdinfo, rtw_p2p_state(pwdinfo)); |
| |
| /* Commented by Kurt 20120113 */ |
| /* Get peer_dev_addr here if peer doesn't issue prov_disc frame. */ |
| if (is_zero_ether_addr(pwdinfo->rx_prov_disc_info.peerDevAddr)) |
| ether_addr_copy(pwdinfo->rx_prov_disc_info.peerDevAddr, hdr->addr2); |
| |
| result = process_p2p_group_negotation_req23a(pwdinfo, frame_body, len); |
| issue_p2p_GO_response(padapter, hdr->addr2, |
| frame_body, len, result); |
| |
| /* Commented by Albert 20110718 */ |
| /* No matter negotiating or negotiation failure, the driver should set up the restore P2P state timer. */ |
| mod_timer(&pwdinfo->restore_p2p_state_timer, |
| jiffies + msecs_to_jiffies(5000)); |
| break; |
| |
| case P2P_GO_NEGO_RESP: |
| DBG_8723A("[%s] Got GO Nego Resp Frame\n", __func__); |
| |
| if (rtw_p2p_chk_state(pwdinfo, P2P_STATE_GONEGO_ING)) |
| { |
| /* Commented by Albert 20110425 */ |
| /* The restore timer is enabled when issuing the nego request frame of rtw_p2p_connect function. */ |
| del_timer_sync(&pwdinfo->restore_p2p_state_timer); |
| pwdinfo->nego_req_info.benable = false; |
| result = process_p2p_group_negotation_resp23a(pwdinfo, frame_body, len); |
| issue_p2p_GO_confirm(pwdinfo->padapter, |
| hdr->addr2, |
| result); |
| if (result == P2P_STATUS_SUCCESS) { |
| if (rtw_p2p_role(pwdinfo) == |
| P2P_ROLE_CLIENT) { |
| pwdinfo->p2p_info.operation_ch[ 0 ] = pwdinfo->peer_operating_ch; |
| pwdinfo->p2p_info.scan_op_ch_only = 1; |
| mod_timer(&pwdinfo->reset_ch_sitesurvey2, jiffies + msecs_to_jiffies(P2P_RESET_SCAN_CH)); |
| } |
| } |
| |
| /* Reset the dialog token for group negotiation frames. */ |
| pwdinfo->negotiation_dialog_token = 1; |
| |
| if (rtw_p2p_chk_state(pwdinfo, P2P_STATE_GONEGO_FAIL)) |
| { |
| mod_timer(&pwdinfo->restore_p2p_state_timer, jiffies + msecs_to_jiffies(5000)); |
| } |
| } else { |
| DBG_8723A("[%s] Skipped GO Nego Resp Frame (p2p_state != P2P_STATE_GONEGO_ING)\n", __func__); |
| } |
| |
| break; |
| |
| case P2P_GO_NEGO_CONF: |
| |
| DBG_8723A("[%s] Got GO Nego Confirm Frame\n", __func__); |
| result = process_p2p_group_negotation_confirm23a(pwdinfo, frame_body, len); |
| if (P2P_STATUS_SUCCESS == result) |
| { |
| if (rtw_p2p_role(pwdinfo) == P2P_ROLE_CLIENT) |
| { |
| pwdinfo->p2p_info.operation_ch[ 0 ] = pwdinfo->peer_operating_ch; |
| pwdinfo->p2p_info.scan_op_ch_only = 1; |
| mod_timer(&pwdinfo->reset_ch_sitesurvey2, jiffies + msecs_to_jiffies(P2P_RESET_SCAN_CH)); |
| } |
| } |
| break; |
| |
| case P2P_INVIT_REQ: |
| /* Added by Albert 2010/10/05 */ |
| /* Received the P2P Invite Request frame. */ |
| |
| DBG_8723A("[%s] Got invite request frame!\n", __func__); |
| if ((p2p_ie = rtw_get_p2p_ie23a(frame_body + _PUBLIC_ACTION_IE_OFFSET_, len - _PUBLIC_ACTION_IE_OFFSET_, NULL, &p2p_ielen))) |
| { |
| /* Parse the necessary information from the P2P Invitation Request frame. */ |
| /* For example: The MAC address of sending this P2P Invitation Request frame. */ |
| u32 attr_contentlen = 0; |
| u8 status_code = P2P_STATUS_FAIL_INFO_UNAVAILABLE; |
| struct group_id_info group_id; |
| u8 invitation_flag = 0; |
| |
| rtw_get_p2p_attr23a_content(p2p_ie, p2p_ielen, P2P_ATTR_INVITATION_FLAGS, &invitation_flag, &attr_contentlen); |
| if (attr_contentlen) |
| { |
| |
| rtw_get_p2p_attr23a_content(p2p_ie, p2p_ielen, P2P_ATTR_GROUP_BSSID, pwdinfo->p2p_peer_interface_addr, &attr_contentlen); |
| /* Commented by Albert 20120510 */ |
| /* Copy to the pwdinfo->p2p_peer_interface_addr. */ |
| /* So that the WFD UI (or Sigma) can get the peer interface address by using the following command. */ |
| /* #> iwpriv wlan0 p2p_get peer_ifa */ |
| /* After having the peer interface address, the sigma can find the correct conf file for wpa_supplicant. */ |
| |
| if (attr_contentlen) |
| { |
| DBG_8723A("[%s] GO's BSSID = %.2X %.2X %.2X %.2X %.2X %.2X\n", __func__, |
| pwdinfo->p2p_peer_interface_addr[0], pwdinfo->p2p_peer_interface_addr[1], |
| pwdinfo->p2p_peer_interface_addr[2], pwdinfo->p2p_peer_interface_addr[3], |
| pwdinfo->p2p_peer_interface_addr[4], pwdinfo->p2p_peer_interface_addr[5]); |
| } |
| |
| if (invitation_flag & P2P_INVITATION_FLAGS_PERSISTENT) |
| { |
| /* Re-invoke the persistent group. */ |
| |
| memset(&group_id, 0x00, sizeof(struct group_id_info)); |
| rtw_get_p2p_attr23a_content(p2p_ie, p2p_ielen, P2P_ATTR_GROUP_ID, (u8*) &group_id, &attr_contentlen); |
| if (attr_contentlen) { |
| if (ether_addr_equal(group_id.go_device_addr, myid(&padapter->eeprompriv))) { |
| /* The p2p device sending this p2p invitation request wants this Wi-Fi device to be the persistent GO. */ |
| rtw_p2p_set_state(pwdinfo, P2P_STATE_RECV_INVITE_REQ_GO); |
| rtw_p2p_set_role(pwdinfo, P2P_ROLE_GO); |
| status_code = P2P_STATUS_SUCCESS; |
| } |
| else |
| { |
| /* The p2p device sending this p2p invitation request wants to be the persistent GO. */ |
| if (is_matched_in_profilelist(pwdinfo->p2p_peer_interface_addr, &pwdinfo->profileinfo[ 0 ])) |
| { |
| u8 operatingch_info[5] = { 0x00 }; |
| if (rtw_get_p2p_attr23a_content(p2p_ie, p2p_ielen, P2P_ATTR_OPERATING_CH, operatingch_info, &attr_contentlen)) |
| { |
| if (rtw_ch_set_search_ch23a(padapter->mlmeextpriv.channel_set, (u32)operatingch_info[4])) |
| { |
| /* The operating channel is acceptable for this device. */ |
| pwdinfo->rx_invitereq_info.operation_ch[0]= operatingch_info[4]; |
| pwdinfo->rx_invitereq_info.scan_op_ch_only = 1; |
| mod_timer(&pwdinfo->reset_ch_sitesurvey, jiffies + msecs_to_jiffies(P2P_RESET_SCAN_CH)); |
| rtw_p2p_set_state(pwdinfo, P2P_STATE_RECV_INVITE_REQ_MATCH); |
| rtw_p2p_set_role(pwdinfo, P2P_ROLE_CLIENT); |
| status_code = P2P_STATUS_SUCCESS; |
| } |
| else |
| { |
| /* The operating channel isn't supported by this device. */ |
| rtw_p2p_set_state(pwdinfo, P2P_STATE_RECV_INVITE_REQ_DISMATCH); |
| rtw_p2p_set_role(pwdinfo, P2P_ROLE_DEVICE); |
| status_code = P2P_STATUS_FAIL_NO_COMMON_CH; |
| mod_timer(&pwdinfo->restore_p2p_state_timer, jiffies + msecs_to_jiffies(3000)); |
| } |
| } |
| else { |
| /* Commented by Albert 20121130 */ |
| /* Intel will use the different P2P IE to store the operating channel information */ |
| /* Workaround for Intel WiDi 3.5 */ |
| rtw_p2p_set_state(pwdinfo, P2P_STATE_RECV_INVITE_REQ_MATCH); |
| rtw_p2p_set_role(pwdinfo, P2P_ROLE_CLIENT); |
| status_code = P2P_STATUS_SUCCESS; |
| } |
| } |
| else |
| { |
| rtw_p2p_set_state(pwdinfo, P2P_STATE_RECV_INVITE_REQ_DISMATCH); |
| |
| status_code = P2P_STATUS_FAIL_UNKNOWN_P2PGROUP; |
| } |
| } |
| } |
| else |
| { |
| DBG_8723A("[%s] P2P Group ID Attribute NOT FOUND!\n", __func__); |
| status_code = P2P_STATUS_FAIL_INFO_UNAVAILABLE; |
| } |
| } |
| else |
| { |
| /* Received the invitation to join a P2P group. */ |
| |
| memset(&group_id, 0x00, sizeof(struct group_id_info)); |
| rtw_get_p2p_attr23a_content(p2p_ie, p2p_ielen, P2P_ATTR_GROUP_ID, (u8*) &group_id, &attr_contentlen); |
| if (attr_contentlen) |
| { |
| if (ether_addr_equal(group_id.go_device_addr, myid(&padapter->eeprompriv))) { |
| /* In this case, the GO can't be myself. */ |
| rtw_p2p_set_state(pwdinfo, P2P_STATE_RECV_INVITE_REQ_DISMATCH); |
| status_code = P2P_STATUS_FAIL_INFO_UNAVAILABLE; |
| } |
| else |
| { |
| /* The p2p device sending this p2p invitation request wants to join an existing P2P group */ |
| /* Commented by Albert 2012/06/28 */ |
| /* In this case, this Wi-Fi device should use the iwpriv command to get the peer device address. */ |
| /* The peer device address should be the destination address for the provisioning discovery request. */ |
| /* Then, this Wi-Fi device should use the iwpriv command to get the peer interface address. */ |
| /* The peer interface address should be the address for WPS mac address */ |
| ether_addr_copy(pwdinfo->p2p_peer_device_addr, group_id.go_device_addr); |
| rtw_p2p_set_role(pwdinfo, P2P_ROLE_CLIENT); |
| rtw_p2p_set_state(pwdinfo, P2P_STATE_RECV_INVITE_REQ_JOIN); |
| status_code = P2P_STATUS_SUCCESS; |
| } |
| } |
| else |
| { |
| DBG_8723A("[%s] P2P Group ID Attribute NOT FOUND!\n", __func__); |
| status_code = P2P_STATUS_FAIL_INFO_UNAVAILABLE; |
| } |
| } |
| } |
| else |
| { |
| DBG_8723A("[%s] P2P Invitation Flags Attribute NOT FOUND!\n", __func__); |
| status_code = P2P_STATUS_FAIL_INFO_UNAVAILABLE; |
| } |
| |
| DBG_8723A("[%s] status_code = %d\n", __func__, status_code); |
| |
| pwdinfo->inviteresp_info.token = frame_body[ 7 ]; |
| issue_p2p_invitation_response23a(padapter, hdr->addr2, pwdinfo->inviteresp_info.token, status_code); |
| } |
| break; |
| |
| case P2P_INVIT_RESP: |
| { |
| u8 attr_content = 0x00; |
| u32 attr_contentlen = 0; |
| |
| DBG_8723A("[%s] Got invite response frame!\n", __func__); |
| del_timer_sync(&pwdinfo->restore_p2p_state_timer); |
| if ((p2p_ie = rtw_get_p2p_ie23a(frame_body + _PUBLIC_ACTION_IE_OFFSET_, len - _PUBLIC_ACTION_IE_OFFSET_, NULL, &p2p_ielen))) |
| { |
| rtw_get_p2p_attr23a_content(p2p_ie, p2p_ielen, P2P_ATTR_STATUS, &attr_content, &attr_contentlen); |
| |
| if (attr_contentlen == 1) |
| { |
| DBG_8723A("[%s] Status = %d\n", __func__, attr_content); |
| pwdinfo->invitereq_info.benable = false; |
| |
| if (attr_content == P2P_STATUS_SUCCESS) |
| { |
| if (ether_addr_equal(pwdinfo->invitereq_info.go_bssid, myid(&padapter->eeprompriv))) { |
| rtw_p2p_set_role(pwdinfo, P2P_ROLE_GO); |
| } |
| else |
| { |
| rtw_p2p_set_role(pwdinfo, P2P_ROLE_CLIENT); |
| } |
| rtw_p2p_set_state(pwdinfo, P2P_STATE_RX_INVITE_RESP_OK); |
| } |
| else |
| { |
| rtw_p2p_set_role(pwdinfo, P2P_ROLE_DEVICE); |
| rtw_p2p_set_state(pwdinfo, P2P_STATE_RX_INVITE_RESP_FAIL); |
| } |
| } |
| else |
| { |
| rtw_p2p_set_role(pwdinfo, P2P_ROLE_DEVICE); |
| rtw_p2p_set_state(pwdinfo, P2P_STATE_RX_INVITE_RESP_FAIL); |
| } |
| } |
| else |
| { |
| rtw_p2p_set_role(pwdinfo, P2P_ROLE_DEVICE); |
| rtw_p2p_set_state(pwdinfo, P2P_STATE_RX_INVITE_RESP_FAIL); |
| } |
| |
| if (rtw_p2p_chk_state(pwdinfo, P2P_STATE_RX_INVITE_RESP_FAIL)) { |
| mod_timer(&pwdinfo->restore_p2p_state_timer, jiffies + msecs_to_jiffies(5000)); |
| } |
| break; |
| } |
| case P2P_DEVDISC_REQ: |
| |
| process_p2p_devdisc_req23a(pwdinfo, pframe, len); |
| |
| break; |
| |
| case P2P_DEVDISC_RESP: |
| |
| process_p2p_devdisc_resp23a(pwdinfo, pframe, len); |
| |
| break; |
| |
| case P2P_PROVISION_DISC_REQ: |
| DBG_8723A("[%s] Got Provisioning Discovery Request Frame\n", __func__); |
| process_p2p_provdisc_req23a(pwdinfo, pframe, len); |
| ether_addr_copy(pwdinfo->rx_prov_disc_info.peerDevAddr, hdr->addr2); |
| |
| /* 20110902 Kurt */ |
| /* Add the following statement to avoid receiving duplicate prov disc req. such that pre_p2p_state would be covered. */ |
| if (!rtw_p2p_chk_state(pwdinfo, P2P_STATE_RX_PROVISION_DIS_REQ)) |
| rtw_p2p_set_pre_state(pwdinfo, rtw_p2p_state(pwdinfo)); |
| |
| rtw_p2p_set_state(pwdinfo, P2P_STATE_RX_PROVISION_DIS_REQ); |
| mod_timer(&pwdinfo->restore_p2p_state_timer, |
| jiffies + msecs_to_jiffies(P2P_PROVISION_TIMEOUT)); |
| break; |
| |
| case P2P_PROVISION_DISC_RESP: |
| /* Commented by Albert 20110707 */ |
| /* Should we check the pwdinfo->tx_prov_disc_info.bsent flag here?? */ |
| DBG_8723A("[%s] Got Provisioning Discovery Response Frame\n", __func__); |
| /* Commented by Albert 20110426 */ |
| /* The restore timer is enabled when issuing the provisioing request frame in rtw_p2p_prov_disc function. */ |
| del_timer_sync(&pwdinfo->restore_p2p_state_timer); |
| rtw_p2p_set_state(pwdinfo, P2P_STATE_RX_PROVISION_DIS_RSP); |
| process_p2p_provdisc_resp23a(pwdinfo, pframe); |
| mod_timer(&pwdinfo->restore_p2p_state_timer, |
| jiffies + msecs_to_jiffies(P2P_PROVISION_TIMEOUT)); |
| break; |
| |
| } |
| } |
| #endif /* CONFIG_8723AU_P2P */ |
| |
| return _SUCCESS; |
| } |
| |
| static unsigned int on_action_public23a_vendor(struct recv_frame *precv_frame) |
| { |
| unsigned int ret = _FAIL; |
| struct sk_buff *skb = precv_frame->pkt; |
| u8 *pframe = skb->data; |
| u8 *frame_body = pframe + sizeof(struct ieee80211_hdr_3addr); |
| |
| if (!memcmp(frame_body + 2, P2P_OUI23A, 4)) { |
| ret = on_action_public23a_p2p(precv_frame); |
| } |
| |
| return ret; |
| } |
| |
| static unsigned int |
| on_action_public23a_default(struct recv_frame *precv_frame, u8 action) |
| { |
| unsigned int ret = _FAIL; |
| struct sk_buff *skb = precv_frame->pkt; |
| u8 *pframe = skb->data; |
| uint frame_len = skb->len; |
| u8 *frame_body = pframe + sizeof(struct ieee80211_hdr_3addr); |
| u8 token; |
| struct rtw_adapter *adapter = precv_frame->adapter; |
| int cnt = 0; |
| char msg[64]; |
| |
| token = frame_body[2]; |
| |
| if (rtw_action_public_decache(precv_frame, token) == _FAIL) |
| goto exit; |
| |
| cnt += sprintf((msg+cnt), "%s(token:%u)", |
| action_public_str23a(action), token); |
| rtw_cfg80211_rx_action(adapter, pframe, frame_len, msg); |
| |
| ret = _SUCCESS; |
| |
| exit: |
| return ret; |
| } |
| |
| unsigned int on_action_public23a(struct rtw_adapter *padapter, |
| struct recv_frame *precv_frame) |
| { |
| unsigned int ret = _FAIL; |
| struct sk_buff *skb = precv_frame->pkt; |
| struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data; |
| u8 *pframe = skb->data; |
| u8 *frame_body = pframe + sizeof(struct ieee80211_hdr_3addr); |
| u8 category, action; |
| |
| /* check RA matches or not */ |
| if (!ether_addr_equal(myid(&padapter->eeprompriv), hdr->addr1)) |
| goto exit; |
| |
| category = frame_body[0]; |
| if (category != WLAN_CATEGORY_PUBLIC) |
| goto exit; |
| |
| action = frame_body[1]; |
| switch (action) { |
| case ACT_PUBLIC_VENDOR: |
| ret = on_action_public23a_vendor(precv_frame); |
| break; |
| default: |
| ret = on_action_public23a_default(precv_frame, action); |
| break; |
| } |
| |
| exit: |
| return ret; |
| } |
| |
| unsigned int OnAction23a_ht(struct rtw_adapter *padapter, |
| struct recv_frame *precv_frame) |
| { |
| return _SUCCESS; |
| } |
| |
| unsigned int OnAction23a_wmm(struct rtw_adapter *padapter, |
| struct recv_frame *precv_frame) |
| { |
| return _SUCCESS; |
| } |
| |
| unsigned int OnAction23a_p2p(struct rtw_adapter *padapter, |
| struct recv_frame *precv_frame) |
| { |
| #ifdef CONFIG_8723AU_P2P |
| u8 *frame_body; |
| u8 category, OUI_Subtype, dialogToken = 0; |
| struct sk_buff *skb = precv_frame->pkt; |
| struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data; |
| u8 *pframe = skb->data; |
| uint len = skb->len; |
| struct wifidirect_info *pwdinfo = &padapter->wdinfo; |
| |
| DBG_8723A("%s\n", __func__); |
| |
| /* check RA matches or not */ |
| if (!ether_addr_equal(myid(&padapter->eeprompriv), hdr->addr1)) |
| return _SUCCESS; |
| |
| frame_body = (unsigned char *) |
| (pframe + sizeof(struct ieee80211_hdr_3addr)); |
| |
| category = frame_body[0]; |
| if (category != WLAN_CATEGORY_VENDOR_SPECIFIC) |
| return _SUCCESS; |
| |
| if (cpu_to_be32(*((u32*) (frame_body + 1))) != P2POUI) |
| return _SUCCESS; |
| |
| if (wdev_to_priv(padapter->rtw_wdev)->p2p_enabled) { |
| rtw_cfg80211_rx_action_p2p(padapter, pframe, len); |
| return _SUCCESS; |
| } else { |
| len -= sizeof(struct ieee80211_hdr_3addr); |
| OUI_Subtype = frame_body[5]; |
| dialogToken = frame_body[6]; |
| |
| switch (OUI_Subtype) |
| { |
| case P2P_NOTICE_OF_ABSENCE: |
| break; |
| |
| case P2P_PRESENCE_REQUEST: |
| process_p2p_presence_req23a(pwdinfo, pframe, len); |
| break; |
| |
| case P2P_PRESENCE_RESPONSE: |
| break; |
| |
| case P2P_GO_DISC_REQUEST: |
| break; |
| |
| default: |
| break; |
| } |
| } |
| #endif /* CONFIG_8723AU_P2P */ |
| |
| return _SUCCESS; |
| } |
| |
| unsigned int OnAction23a(struct rtw_adapter *padapter, |
| struct recv_frame *precv_frame) |
| { |
| int i; |
| unsigned char category; |
| struct action_handler *ptable; |
| unsigned char *frame_body; |
| struct sk_buff *skb = precv_frame->pkt; |
| u8 *pframe = skb->data; |
| |
| frame_body = (unsigned char *) |
| (pframe + sizeof(struct ieee80211_hdr_3addr)); |
| |
| category = frame_body[0]; |
| |
| for (i = 0; |
| i < sizeof(OnAction23a_tbl) / sizeof(struct action_handler); i++) { |
| ptable = &OnAction23a_tbl[i]; |
| |
| if (category == ptable->num) |
| ptable->func(padapter, precv_frame); |
| } |
| |
| return _SUCCESS; |
| } |
| |
| unsigned int DoReserved23a(struct rtw_adapter *padapter, |
| struct recv_frame *precv_frame) |
| { |
| return _SUCCESS; |
| } |
| |
| struct xmit_frame *alloc_mgtxmitframe23a(struct xmit_priv *pxmitpriv) |
| { |
| struct xmit_frame *pmgntframe; |
| struct xmit_buf *pxmitbuf; |
| |
| pmgntframe = rtw_alloc_xmitframe23a_ext(pxmitpriv); |
| |
| if (!pmgntframe) { |
| DBG_8723A(FUNC_ADPT_FMT" alloc xmitframe fail\n", |
| FUNC_ADPT_ARG(pxmitpriv->adapter)); |
| goto exit; |
| } |
| |
| pxmitbuf = rtw_alloc_xmitbuf23a_ext(pxmitpriv); |
| if (!pxmitbuf) { |
| DBG_8723A(FUNC_ADPT_FMT" alloc xmitbuf fail\n", |
| FUNC_ADPT_ARG(pxmitpriv->adapter)); |
| rtw_free_xmitframe23a(pxmitpriv, pmgntframe); |
| pmgntframe = NULL; |
| goto exit; |
| } |
| |
| pmgntframe->frame_tag = MGNT_FRAMETAG; |
| pmgntframe->pxmitbuf = pxmitbuf; |
| pmgntframe->buf_addr = pxmitbuf->pbuf; |
| pxmitbuf->priv_data = pmgntframe; |
| |
| exit: |
| return pmgntframe; |
| } |
| |
| /**************************************************************************** |
| |
| Following are some TX fuctions for WiFi MLME |
| |
| *****************************************************************************/ |
| |
| void update_mgnt_tx_rate23a(struct rtw_adapter *padapter, u8 rate) |
| { |
| struct mlme_ext_priv *pmlmeext = &padapter->mlmeextpriv; |
| |
| pmlmeext->tx_rate = rate; |
| DBG_8723A("%s(): rate = %x\n", __func__, rate); |
| } |
| |
| void update_mgntframe_attrib23a(struct rtw_adapter *padapter, |
| struct pkt_attrib *pattrib) |
| { |
| struct mlme_ext_priv *pmlmeext = &padapter->mlmeextpriv; |
| |
| memset((u8 *)pattrib, 0, sizeof(struct pkt_attrib)); |
| |
| pattrib->hdrlen = 24; |
| pattrib->nr_frags = 1; |
| pattrib->priority = 7; |
| pattrib->mac_id = 0; |
| pattrib->qsel = 0x12; |
| |
| pattrib->pktlen = 0; |
| |
| if (pmlmeext->cur_wireless_mode & WIRELESS_11B) |
| pattrib->raid = 6;/* b mode */ |
| else |
| pattrib->raid = 5;/* a/g mode */ |
| |
| pattrib->encrypt = _NO_PRIVACY_; |
| pattrib->bswenc = false; |
| |
| pattrib->qos_en = false; |
| pattrib->ht_en = false; |
| pattrib->bwmode = HT_CHANNEL_WIDTH_20; |
| pattrib->ch_offset = HAL_PRIME_CHNL_OFFSET_DONT_CARE; |
| pattrib->sgi = false; |
| |
| pattrib->seqnum = pmlmeext->mgnt_seq; |
| |
| pattrib->retry_ctrl = true; |
| } |
| |
| void dump_mgntframe23a(struct rtw_adapter *padapter, |
| struct xmit_frame *pmgntframe) |
| { |
| if (padapter->bSurpriseRemoved == true || |
| padapter->bDriverStopped == true) |
| return; |
| |
| rtw_hal_mgnt_xmit23a(padapter, pmgntframe); |
| } |
| |
| s32 dump_mgntframe23a_and_wait(struct rtw_adapter *padapter, |
| struct xmit_frame *pmgntframe, int timeout_ms) |
| { |
| s32 ret = _FAIL; |
| unsigned long irqL; |
| struct xmit_priv *pxmitpriv = &padapter->xmitpriv; |
| struct xmit_buf *pxmitbuf = pmgntframe->pxmitbuf; |
| struct submit_ctx sctx; |
| |
| if (padapter->bSurpriseRemoved == true || |
| padapter->bDriverStopped == true) |
| return ret; |
| |
| rtw_sctx_init23a(&sctx, timeout_ms); |
| pxmitbuf->sctx = &sctx; |
| |
| ret = rtw_hal_mgnt_xmit23a(padapter, pmgntframe); |
| |
| if (ret == _SUCCESS) |
| ret = rtw_sctx_wait23a(&sctx); |
| |
| spin_lock_irqsave(&pxmitpriv->lock_sctx, irqL); |
| pxmitbuf->sctx = NULL; |
| spin_unlock_irqrestore(&pxmitpriv->lock_sctx, irqL); |
| |
| return ret; |
| } |
| |
| s32 dump_mgntframe23a_and_wait_ack23a(struct rtw_adapter *padapter, |
| struct xmit_frame *pmgntframe) |
| { |
| s32 ret = _FAIL; |
| u32 timeout_ms = 500;/* 500ms */ |
| struct xmit_priv *pxmitpriv = &padapter->xmitpriv; |
| |
| if (padapter->bSurpriseRemoved == true || |
| padapter->bDriverStopped == true) |
| return -1; |
| |
| mutex_lock(&pxmitpriv->ack_tx_mutex); |
| pxmitpriv->ack_tx = true; |
| |
| pmgntframe->ack_report = 1; |
| if (rtw_hal_mgnt_xmit23a(padapter, pmgntframe) == _SUCCESS) { |
| ret = rtw_ack_tx_wait23a(pxmitpriv, timeout_ms); |
| } |
| |
| pxmitpriv->ack_tx = false; |
| mutex_unlock(&pxmitpriv->ack_tx_mutex); |
| |
| return ret; |
| } |
| |
| static int update_hidden_ssid(u8 *ies, u32 ies_len, u8 hidden_ssid_mode) |
| { |
| u8 *ssid_ie; |
| int ssid_len_ori; |
| int len_diff = 0; |
| u8 *next_ie; |
| u32 remain_len; |
| |
| ssid_ie = rtw_get_ie23a(ies, WLAN_EID_SSID, &ssid_len_ori, ies_len); |
| |
| /* DBG_8723A("%s hidden_ssid_mode:%u, ssid_ie:%p, ssid_len_ori:%d\n", |
| __func__, hidden_ssid_mode, ssid_ie, ssid_len_ori); */ |
| |
| if (ssid_ie && ssid_len_ori > 0) { |
| switch (hidden_ssid_mode) |
| { |
| case 1: |
| next_ie = ssid_ie + 2 + ssid_len_ori; |
| remain_len = 0; |
| |
| remain_len = ies_len -(next_ie-ies); |
| |
| ssid_ie[1] = 0; |
| memcpy(ssid_ie+2, next_ie, remain_len); |
| len_diff -= ssid_len_ori; |
| |
| break; |
| case 2: |
| memset(&ssid_ie[2], 0, ssid_len_ori); |
| break; |
| default: |
| break; |
| } |
| } |
| |
| return len_diff; |
| } |
| |
| void issue_beacon23a(struct rtw_adapter *padapter, int timeout_ms) |
| { |
| struct xmit_frame *pmgntframe; |
| struct pkt_attrib *pattrib; |
| unsigned char *pframe; |
| struct ieee80211_hdr *pwlanhdr; |
| unsigned short *fctrl; |
| unsigned int rate_len; |
| struct xmit_priv *pxmitpriv = &padapter->xmitpriv; |
| struct mlme_priv *pmlmepriv = &padapter->mlmepriv; |
| struct mlme_ext_priv *pmlmeext = &padapter->mlmeextpriv; |
| struct mlme_ext_info *pmlmeinfo = &pmlmeext->mlmext_info; |
| struct wlan_bssid_ex *cur_network = &pmlmeinfo->network; |
| u8 bc_addr[] = {0xff, 0xff, 0xff, 0xff, 0xff, 0xff}; |
| #ifdef CONFIG_8723AU_P2P |
| struct wifidirect_info *pwdinfo = &padapter->wdinfo; |
| #endif /* CONFIG_8723AU_P2P */ |
| u8 *wps_ie; |
| u32 wps_ielen; |
| u8 sr = 0; |
| int len_diff; |
| |
| /* DBG_8723A("%s\n", __func__); */ |
| |
| if ((pmgntframe = alloc_mgtxmitframe23a(pxmitpriv)) == NULL) { |
| DBG_8723A("%s, alloc mgnt frame fail\n", __func__); |
| return; |
| } |
| #ifdef CONFIG_8723AU_AP_MODE |
| spin_lock_bh(&pmlmepriv->bcn_update_lock); |
| #endif |
| |
| /* update attribute */ |
| pattrib = &pmgntframe->attrib; |
| update_mgntframe_attrib23a(padapter, pattrib); |
| pattrib->qsel = 0x10; |
| |
| memset(pmgntframe->buf_addr, 0, WLANHDR_OFFSET + TXDESC_OFFSET); |
| |
| pframe = (u8 *)(pmgntframe->buf_addr) + TXDESC_OFFSET; |
| pwlanhdr = (struct ieee80211_hdr *)pframe; |
| |
| fctrl = &pwlanhdr->frame_control; |
| *fctrl = 0; |
| |
| ether_addr_copy(pwlanhdr->addr1, bc_addr); |
| ether_addr_copy(pwlanhdr->addr2, myid(&padapter->eeprompriv)); |
| ether_addr_copy(pwlanhdr->addr3, get_my_bssid23a(cur_network)); |
| |
| SetSeqNum(pwlanhdr, 0 /*pmlmeext->mgnt_seq*/); |
| /* pmlmeext->mgnt_seq++; */ |
| SetFrameSubType(pframe, WIFI_BEACON); |
| |
| pframe += sizeof(struct ieee80211_hdr_3addr); |
| pattrib->pktlen = sizeof(struct ieee80211_hdr_3addr); |
| |
| if ((pmlmeinfo->state&0x03) == WIFI_FW_AP_STATE) { |
| /* DBG_8723A("ie len =%d\n", cur_network->IELength); */ |
| #ifdef CONFIG_8723AU_P2P |
| /* for P2P : Primary Device Type & Device Name */ |
| u32 insert_len = 0; |
| wps_ie = rtw_get_wps_ie23a(cur_network->IEs + _FIXED_IE_LENGTH_, |
| cur_network->IELength - |
| _FIXED_IE_LENGTH_, NULL, &wps_ielen); |
| |
| if (rtw_p2p_chk_role(pwdinfo, P2P_ROLE_GO) && wps_ie && |
| wps_ielen > 0) { |
| uint wps_offset, remainder_ielen; |
| u8 *premainder_ie, *pframe_wscie; |
| |
| wps_offset = (uint)(wps_ie - cur_network->IEs); |
| |
| premainder_ie = wps_ie + wps_ielen; |
| |
| remainder_ielen = cur_network->IELength - wps_offset - |
| wps_ielen; |
| |
| if (wdev_to_priv(padapter->rtw_wdev)->p2p_enabled) { |
| if (pmlmepriv->wps_beacon_ie && |
| pmlmepriv->wps_beacon_ie_len>0) { |
| memcpy(pframe, cur_network->IEs, |
| wps_offset); |
| pframe += wps_offset; |
| pattrib->pktlen += wps_offset; |
| |
| memcpy(pframe, pmlmepriv->wps_beacon_ie, |
| pmlmepriv->wps_beacon_ie_len); |
| pframe += pmlmepriv->wps_beacon_ie_len; |
| pattrib->pktlen += |
| pmlmepriv->wps_beacon_ie_len; |
| |
| /* copy remainder_ie to pframe */ |
| memcpy(pframe, premainder_ie, |
| remainder_ielen); |
| pframe += remainder_ielen; |
| pattrib->pktlen += remainder_ielen; |
| } else { |
| memcpy(pframe, cur_network->IEs, |
| cur_network->IELength); |
| pframe += cur_network->IELength; |
| pattrib->pktlen += |
| cur_network->IELength; |
| } |
| } else { |
| pframe_wscie = pframe + wps_offset; |
| memcpy(pframe, cur_network->IEs, |
| wps_offset + wps_ielen); |
| pframe += (wps_offset + wps_ielen); |
| pattrib->pktlen += (wps_offset + wps_ielen); |
| |
| /* now pframe is end of wsc ie, insert Primary |
| Device Type & Device Name */ |
| /* Primary Device Type */ |
| /* Type: */ |
| *(u16*) (pframe + insert_len) = |
| cpu_to_be16(WPS_ATTR_PRIMARY_DEV_TYPE); |
| insert_len += 2; |
| |
| /* Length: */ |
| *(u16*) (pframe + insert_len) = |
| cpu_to_be16(0x0008); |
| insert_len += 2; |
| |
| /* Value: */ |
| /* Category ID */ |
| *(u16*) (pframe + insert_len) = |
| cpu_to_be16(WPS_PDT_CID_MULIT_MEDIA); |
| insert_len += 2; |
| |
| /* OUI */ |
| *(u32*) (pframe + insert_len) = |
| cpu_to_be32(WPSOUI); |
| insert_len += 4; |
| |
| /* Sub Category ID */ |
| *(u16*) (pframe + insert_len) = |
| cpu_to_be16(WPS_PDT_SCID_MEDIA_SERVER); |
| insert_len += 2; |
| |
| /* Device Name */ |
| /* Type: */ |
| *(u16*) (pframe + insert_len) = |
| cpu_to_be16(WPS_ATTR_DEVICE_NAME); |
| insert_len += 2; |
| |
| /* Length: */ |
| *(u16*) (pframe + insert_len) = |
| cpu_to_be16(pwdinfo->device_name_len); |
| insert_len += 2; |
| |
| /* Value: */ |
| memcpy(pframe + insert_len, |
| pwdinfo->device_name, |
| pwdinfo->device_name_len); |
| insert_len += pwdinfo->device_name_len; |
| |
| /* update wsc ie length */ |
| *(pframe_wscie+1) = (wps_ielen -2) + insert_len; |
| |
| /* pframe move to end */ |
| pframe+= insert_len; |
| pattrib->pktlen += insert_len; |
| |
| /* copy remainder_ie to pframe */ |
| memcpy(pframe, premainder_ie, remainder_ielen); |
| pframe += remainder_ielen; |
| pattrib->pktlen += remainder_ielen; |
| } |
| } else |
| #endif /* CONFIG_8723AU_P2P */ |
| memcpy(pframe, cur_network->IEs, cur_network->IELength); |
| len_diff = update_hidden_ssid(pframe + _BEACON_IE_OFFSET_, |
| cur_network->IELength - |
| _BEACON_IE_OFFSET_, |
| pmlmeinfo->hidden_ssid_mode); |
| pframe += (cur_network->IELength+len_diff); |
| pattrib->pktlen += (cur_network->IELength+len_diff); |
| |
| wps_ie = rtw_get_wps_ie23a(pmgntframe->buf_addr + TXDESC_OFFSET+ |
| sizeof (struct ieee80211_hdr_3addr) + |
| _BEACON_IE_OFFSET_, pattrib->pktlen - |
| sizeof (struct ieee80211_hdr_3addr) - |
| _BEACON_IE_OFFSET_, NULL, |
| &wps_ielen); |
| if (wps_ie && wps_ielen > 0) { |
| rtw_get_wps_attr_content23a(wps_ie, wps_ielen, |
| WPS_ATTR_SELECTED_REGISTRAR, |
| (u8*)&sr, NULL); |
| } |
| if (sr != 0) |
| set_fwstate(pmlmepriv, WIFI_UNDER_WPS); |
| else |
| _clr_fwstate_(pmlmepriv, WIFI_UNDER_WPS); |
| |
| #ifdef CONFIG_8723AU_P2P |
| if (rtw_p2p_chk_role(pwdinfo, P2P_ROLE_GO)) { |
| u32 len; |
| if (wdev_to_priv(padapter->rtw_wdev)->p2p_enabled) { |
| len = pmlmepriv->p2p_beacon_ie_len; |
| if (pmlmepriv->p2p_beacon_ie && len > 0) |
| memcpy(pframe, |
| pmlmepriv->p2p_beacon_ie, len); |
| } else |
| len = build_beacon_p2p_ie23a(pwdinfo, pframe); |
| |
| pframe += len; |
| pattrib->pktlen += len; |
| |
| if (true == pwdinfo->wfd_info->wfd_enable) { |
| len = build_beacon_wfd_ie(pwdinfo, pframe); |
| } else { |
| len = 0; |
| if (pmlmepriv->wfd_beacon_ie && |
| pmlmepriv->wfd_beacon_ie_len>0) { |
| len = pmlmepriv->wfd_beacon_ie_len; |
| memcpy(pframe, |
| pmlmepriv->wfd_beacon_ie, len); |
| } |
| } |
| pframe += len; |
| pattrib->pktlen += len; |
| } |
| #endif /* CONFIG_8723AU_P2P */ |
| |
| goto _issue_bcn; |
| } |
| |
| /* below for ad-hoc mode */ |
| |
| /* timestamp will be inserted by hardware */ |
| pframe += 8; |
| pattrib->pktlen += 8; |
| |
| /* beacon interval: 2 bytes */ |
| |
| memcpy(pframe, (unsigned char *) |
| rtw_get_beacon_interval23a_from_ie(cur_network->IEs), 2); |
| |
| pframe += 2; |
| pattrib->pktlen += 2; |
| |
| /* capability info: 2 bytes */ |
| |
| memcpy(pframe, (unsigned char *) |
| rtw_get_capability23a_from_ie(cur_network->IEs), 2); |
| |
| pframe += 2; |
| pattrib->pktlen += 2; |
| |
| /* SSID */ |
| pframe = rtw_set_ie23a(pframe, _SSID_IE_, cur_network->Ssid.ssid_len, |
| cur_network->Ssid.ssid, &pattrib->pktlen); |
| |
| /* supported rates... */ |
| rate_len = rtw_get_rateset_len23a(cur_network->SupportedRates); |
| pframe = rtw_set_ie23a(pframe, _SUPPORTEDRATES_IE_, |
| ((rate_len > 8)? 8: rate_len), |
| cur_network->SupportedRates, &pattrib->pktlen); |
| |
| /* DS parameter set */ |
| pframe = rtw_set_ie23a(pframe, _DSSET_IE_, 1, (unsigned char *) |
| &cur_network->Configuration.DSConfig, |
| &pattrib->pktlen); |
| |
| /* if ((pmlmeinfo->state&0x03) == WIFI_FW_ADHOC_STATE) */ |
| { |
| u8 erpinfo = 0; |
| u32 ATIMWindow; |
| /* IBSS Parameter Set... */ |
| /* ATIMWindow = cur->Configuration.ATIMWindow; */ |
| ATIMWindow = 0; |
| pframe = rtw_set_ie23a(pframe, _IBSS_PARA_IE_, 2, |
| (unsigned char *)&ATIMWindow, |
| &pattrib->pktlen); |
| |
| /* ERP IE */ |
| pframe = rtw_set_ie23a(pframe, _ERPINFO_IE_, 1, |
| &erpinfo, &pattrib->pktlen); |
| } |
| |
| /* EXTERNDED SUPPORTED RATE */ |
| if (rate_len > 8) |
| pframe = rtw_set_ie23a(pframe, _EXT_SUPPORTEDRATES_IE_, |
| rate_len - 8, |
| cur_network->SupportedRates + 8, |
| &pattrib->pktlen); |
| |
| /* todo:HT for adhoc */ |
| |
| _issue_bcn: |
| |
| #ifdef CONFIG_8723AU_AP_MODE |
| pmlmepriv->update_bcn = false; |
| |
| spin_unlock_bh(&pmlmepriv->bcn_update_lock); |
| #endif |
| |
| if ((pattrib->pktlen + TXDESC_SIZE) > 512) { |
| DBG_8723A("beacon frame too large\n"); |
| return; |
| } |
| |
| pattrib->last_txcmdsz = pattrib->pktlen; |
| |
| /* DBG_8723A("issue bcn_sz =%d\n", pattrib->last_txcmdsz); */ |
| if (timeout_ms > 0) |
| dump_mgntframe23a_and_wait(padapter, pmgntframe, timeout_ms); |
| else |
| dump_mgntframe23a(padapter, pmgntframe); |
| } |
| |
| void issue_probersp23a(struct rtw_adapter *padapter, unsigned char *da, |
| u8 is_valid_p2p_probereq) |
| { |
| struct xmit_frame *pmgntframe; |
| struct pkt_attrib *pattrib; |
| unsigned char *pframe; |
| struct ieee80211_hdr *pwlanhdr; |
| unsigned short *fctrl; |
| unsigned char *mac, *bssid; |
| struct xmit_priv *pxmitpriv = &padapter->xmitpriv; |
| #ifdef CONFIG_8723AU_AP_MODE |
| u8 *pwps_ie; |
| uint wps_ielen; |
| u8 *ssid_ie; |
| int ssid_ielen; |
| int ssid_ielen_diff; |
| u8 buf[MAX_IE_SZ]; |
| u8 *ies; |
| #endif |
| #if defined(CONFIG_8723AU_AP_MODE) || defined(CONFIG_8723AU_P2P) |
| struct mlme_priv *pmlmepriv = &padapter->mlmepriv; |
| #endif |
| struct mlme_ext_priv *pmlmeext = &padapter->mlmeextpriv; |
| struct mlme_ext_info *pmlmeinfo = &pmlmeext->mlmext_info; |
| struct wlan_bssid_ex *cur_network = &pmlmeinfo->network; |
| unsigned int rate_len; |
| #ifdef CONFIG_8723AU_P2P |
| struct wifidirect_info *pwdinfo = &padapter->wdinfo; |
| #endif /* CONFIG_8723AU_P2P */ |
| |
| /* DBG_8723A("%s\n", __func__); */ |
| |
| if ((pmgntframe = alloc_mgtxmitframe23a(pxmitpriv)) == NULL) |
| { |
| DBG_8723A("%s, alloc mgnt frame fail\n", __func__); |
| return; |
| } |
| |
| /* update attribute */ |
| pattrib = &pmgntframe->attrib; |
| update_mgntframe_attrib23a(padapter, pattrib); |
| |
| memset(pmgntframe->buf_addr, 0, WLANHDR_OFFSET + TXDESC_OFFSET); |
| |
| pframe = (u8 *)(pmgntframe->buf_addr) + TXDESC_OFFSET; |
| pwlanhdr = (struct ieee80211_hdr *)pframe; |
| |
| mac = myid(&padapter->eeprompriv); |
| bssid = cur_network->MacAddress; |
| |
| fctrl = &pwlanhdr->frame_control; |
| *fctrl = 0; |
| ether_addr_copy(pwlanhdr->addr1, da); |
| ether_addr_copy(pwlanhdr->addr2, mac); |
| ether_addr_copy(pwlanhdr->addr3, bssid); |
| |
| SetSeqNum(pwlanhdr, pmlmeext->mgnt_seq); |
| pmlmeext->mgnt_seq++; |
| SetFrameSubType(fctrl, WIFI_PROBERSP); |
| |
| pattrib->hdrlen = sizeof(struct ieee80211_hdr_3addr); |
| pattrib->pktlen = pattrib->hdrlen; |
| pframe += pattrib->hdrlen; |
| |
| if (cur_network->IELength > MAX_IE_SZ) |
| return; |
| |
| #ifdef CONFIG_8723AU_AP_MODE |
| if ((pmlmeinfo->state & 0x03) == WIFI_FW_AP_STATE) { |
| pwps_ie = rtw_get_wps_ie23a(cur_network->IEs + |
| _FIXED_IE_LENGTH_, |
| cur_network->IELength - |
| _FIXED_IE_LENGTH_, NULL, |
| &wps_ielen); |
| |
| /* inerset & update wps_probe_resp_ie */ |
| if ((pmlmepriv->wps_probe_resp_ie != NULL) && pwps_ie && |
| (wps_ielen > 0)) { |
| uint wps_offset, remainder_ielen; |
| u8 *premainder_ie; |
| |
| wps_offset = (uint)(pwps_ie - cur_network->IEs); |
| |
| premainder_ie = pwps_ie + wps_ielen; |
| |
| remainder_ielen = cur_network->IELength - wps_offset - |
| wps_ielen; |
| |
| memcpy(pframe, cur_network->IEs, wps_offset); |
| pframe += wps_offset; |
| pattrib->pktlen += wps_offset; |
| |
| /* to get ie data len */ |
| wps_ielen = (uint)pmlmepriv->wps_probe_resp_ie[1]; |
| if ((wps_offset+wps_ielen+2)<= MAX_IE_SZ) { |
| memcpy(pframe, pmlmepriv->wps_probe_resp_ie, |
| wps_ielen+2); |
| pframe += wps_ielen+2; |
| pattrib->pktlen += wps_ielen+2; |
| } |
| |
| if ((wps_offset+wps_ielen+2+remainder_ielen) <= |
| MAX_IE_SZ) { |
| memcpy(pframe, premainder_ie, remainder_ielen); |
| pframe += remainder_ielen; |
| pattrib->pktlen += remainder_ielen; |
| } |
| } else { |
| memcpy(pframe, cur_network->IEs, cur_network->IELength); |
| pframe += cur_network->IELength; |
| pattrib->pktlen += cur_network->IELength; |
| } |
| |
| /* retrieve SSID IE from cur_network->Ssid */ |
| ies = pmgntframe->buf_addr + TXDESC_OFFSET + |
| sizeof(struct ieee80211_hdr_3addr); |
| |
| ssid_ie = rtw_get_ie23a(ies+_FIXED_IE_LENGTH_, _SSID_IE_, |
| &ssid_ielen, |
| (pframe-ies)-_FIXED_IE_LENGTH_); |
| |
| ssid_ielen_diff = cur_network->Ssid.ssid_len - ssid_ielen; |
| |
| if (ssid_ie && cur_network->Ssid.ssid_len) { |
| uint remainder_ielen; |
| u8 *remainder_ie; |
| remainder_ie = ssid_ie + 2; |
| remainder_ielen = (pframe-remainder_ie); |
| |
| DBG_8723A_LEVEL(_drv_warning_, FUNC_ADPT_FMT |
| " remainder_ielen > MAX_IE_SZ\n", |
| FUNC_ADPT_ARG(padapter)); |
| if (remainder_ielen > MAX_IE_SZ) { |
| remainder_ielen = MAX_IE_SZ; |
| } |
| |
| memcpy(buf, remainder_ie, remainder_ielen); |
| memcpy(remainder_ie+ssid_ielen_diff, buf, |
| remainder_ielen); |
| *(ssid_ie+1) = cur_network->Ssid.ssid_len; |
| memcpy(ssid_ie+2, cur_network->Ssid.ssid, |
| cur_network->Ssid.ssid_len); |
| |
| pframe += ssid_ielen_diff; |
| pattrib->pktlen += ssid_ielen_diff; |
| } |
| } else |
| #endif |
| { |
| |
| /* timestamp will be inserted by hardware */ |
| pframe += 8; |
| pattrib->pktlen += 8; |
| |
| /* beacon interval: 2 bytes */ |
| |
| memcpy(pframe, (unsigned char *) |
| rtw_get_beacon_interval23a_from_ie(cur_network->IEs), 2); |
| |
| pframe += 2; |
| pattrib->pktlen += 2; |
| |
| /* capability info: 2 bytes */ |
| |
| memcpy(pframe, (unsigned char *) |
| rtw_get_capability23a_from_ie(cur_network->IEs), 2); |
| |
| pframe += 2; |
| pattrib->pktlen += 2; |
| |
| /* below for ad-hoc mode */ |
| |
| /* SSID */ |
| pframe = rtw_set_ie23a(pframe, _SSID_IE_, |
| cur_network->Ssid.ssid_len, |
| cur_network->Ssid.ssid, &pattrib->pktlen); |
| |
| /* supported rates... */ |
| rate_len = rtw_get_rateset_len23a(cur_network->SupportedRates); |
| pframe = rtw_set_ie23a(pframe, _SUPPORTEDRATES_IE_, |
| ((rate_len > 8)? 8: rate_len), |
| cur_network->SupportedRates, |
| &pattrib->pktlen); |
| |
| /* DS parameter set */ |
| pframe = rtw_set_ie23a(pframe, _DSSET_IE_, 1, (unsigned char *) |
| &cur_network->Configuration.DSConfig, |
| &pattrib->pktlen); |
| |
| if ((pmlmeinfo->state&0x03) == WIFI_FW_ADHOC_STATE) { |
| u8 erpinfo = 0; |
| u32 ATIMWindow; |
| /* IBSS Parameter Set... */ |
| /* ATIMWindow = cur->Configuration.ATIMWindow; */ |
| ATIMWindow = 0; |
| pframe = rtw_set_ie23a(pframe, _IBSS_PARA_IE_, 2, |
| (unsigned char *)&ATIMWindow, |
| &pattrib->pktlen); |
| |
| /* ERP IE */ |
| pframe = rtw_set_ie23a(pframe, _ERPINFO_IE_, 1, |
| &erpinfo, &pattrib->pktlen); |
| } |
| |
| /* EXTERNDED SUPPORTED RATE */ |
| if (rate_len > 8) |
| pframe = rtw_set_ie23a(pframe, _EXT_SUPPORTEDRATES_IE_, |
| rate_len - 8, |
| cur_network->SupportedRates + 8, |
| &pattrib->pktlen); |
| |
| /* todo:HT for adhoc */ |
| } |
| |
| #ifdef CONFIG_8723AU_P2P |
| if (rtw_p2p_chk_role(pwdinfo, P2P_ROLE_GO) && is_valid_p2p_probereq) { |
| u32 len; |
| if (wdev_to_priv(padapter->rtw_wdev)->p2p_enabled) { |
| /* if pwdinfo->role == P2P_ROLE_DEVICE will call |
| issue_probersp23a_p2p23a() */ |
| len = pmlmepriv->p2p_go_probe_resp_ie_len; |
| if (pmlmepriv->p2p_go_probe_resp_ie && len>0) |
| memcpy(pframe, pmlmepriv->p2p_go_probe_resp_ie, |
| len); |
| } else |
| len = build_probe_resp_p2p_ie23a(pwdinfo, pframe); |
| |
| pframe += len; |
| pattrib->pktlen += len; |
| |
| if (true == pwdinfo->wfd_info->wfd_enable) { |
| len = build_probe_resp_wfd_ie(pwdinfo, pframe, 0); |
| } else { |
| len = 0; |
| if (pmlmepriv->wfd_probe_resp_ie && |
| pmlmepriv->wfd_probe_resp_ie_len > 0) { |
| len = pmlmepriv->wfd_probe_resp_ie_len; |
| memcpy(pframe, pmlmepriv->wfd_probe_resp_ie, |
| len); |
| } |
| } |
| pframe += len; |
| pattrib->pktlen += len; |
| } |
| #endif /* CONFIG_8723AU_P2P */ |
| |
| pattrib->last_txcmdsz = pattrib->pktlen; |
| |
| dump_mgntframe23a(padapter, pmgntframe); |
| |
| return; |
| } |
| |
| static int _issue_probereq23a(struct rtw_adapter *padapter, |
| struct cfg80211_ssid *pssid, u8 *da, int wait_ack) |
| { |
| int ret = _FAIL; |
| struct xmit_frame *pmgntframe; |
| struct pkt_attrib *pattrib; |
| unsigned char *pframe; |
| struct ieee80211_hdr *pwlanhdr; |
| unsigned short *fctrl; |
| unsigned char *mac; |
| unsigned char bssrate[NumRates]; |
| struct xmit_priv *pxmitpriv = &padapter->xmitpriv; |
| struct mlme_priv *pmlmepriv = &padapter->mlmepriv; |
| struct mlme_ext_priv *pmlmeext = &padapter->mlmeextpriv; |
| int bssrate_len = 0; |
| u8 bc_addr[] = {0xff, 0xff, 0xff, 0xff, 0xff, 0xff}; |
| |
| RT_TRACE(_module_rtl871x_mlme_c_, _drv_notice_, |
| ("+issue_probereq23a\n")); |
| |
| if ((pmgntframe = alloc_mgtxmitframe23a(pxmitpriv)) == NULL) |
| goto exit; |
| |
| /* update attribute */ |
| pattrib = &pmgntframe->attrib; |
| update_mgntframe_attrib23a(padapter, pattrib); |
| |
| memset(pmgntframe->buf_addr, 0, WLANHDR_OFFSET + TXDESC_OFFSET); |
| |
| pframe = (u8 *)(pmgntframe->buf_addr) + TXDESC_OFFSET; |
| pwlanhdr = (struct ieee80211_hdr *)pframe; |
| |
| mac = myid(&padapter->eeprompriv); |
| |
| fctrl = &pwlanhdr->frame_control; |
| *fctrl = 0; |
| |
| if (da) { |
| /* unicast probe request frame */ |
| ether_addr_copy(pwlanhdr->addr1, da); |
| ether_addr_copy(pwlanhdr->addr3, da); |
| } else { |
| /* broadcast probe request frame */ |
| ether_addr_copy(pwlanhdr->addr1, bc_addr); |
| ether_addr_copy(pwlanhdr->addr3, bc_addr); |
| } |
| |
| ether_addr_copy(pwlanhdr->addr2, mac); |
| |
| SetSeqNum(pwlanhdr, pmlmeext->mgnt_seq); |
| pmlmeext->mgnt_seq++; |
| SetFrameSubType(pframe, WIFI_PROBEREQ); |
| |
| pframe += sizeof (struct ieee80211_hdr_3addr); |
| pattrib->pktlen = sizeof (struct ieee80211_hdr_3addr); |
| |
| if (pssid) |
| pframe = rtw_set_ie23a(pframe, _SSID_IE_, pssid->ssid_len, |
| pssid->ssid, &pattrib->pktlen); |
| else |
| pframe = rtw_set_ie23a(pframe, _SSID_IE_, 0, NULL, |
| &pattrib->pktlen); |
| |
| get_rate_set23a(padapter, bssrate, &bssrate_len); |
| |
| if (bssrate_len > 8) { |
| pframe = rtw_set_ie23a(pframe, _SUPPORTEDRATES_IE_, 8, |
| bssrate, &pattrib->pktlen); |
| pframe = rtw_set_ie23a(pframe, _EXT_SUPPORTEDRATES_IE_, |
| (bssrate_len - 8), (bssrate + 8), |
| &pattrib->pktlen); |
| } else { |
| pframe = rtw_set_ie23a(pframe, _SUPPORTEDRATES_IE_, |
| bssrate_len, bssrate, &pattrib->pktlen); |
| } |
| |
| /* add wps_ie for wps2.0 */ |
| if (pmlmepriv->wps_probe_req_ie_len>0 && pmlmepriv->wps_probe_req_ie) { |
| memcpy(pframe, pmlmepriv->wps_probe_req_ie, |
| pmlmepriv->wps_probe_req_ie_len); |
| pframe += pmlmepriv->wps_probe_req_ie_len; |
| pattrib->pktlen += pmlmepriv->wps_probe_req_ie_len; |
| } |
| |
| pattrib->last_txcmdsz = pattrib->pktlen; |
| |
| RT_TRACE(_module_rtl871x_mlme_c_, _drv_notice_, |
| ("issuing probe_req, tx_len =%d\n", pattrib->last_txcmdsz)); |
| |
| if (wait_ack) { |
| ret = dump_mgntframe23a_and_wait_ack23a(padapter, pmgntframe); |
| } else { |
| dump_mgntframe23a(padapter, pmgntframe); |
| ret = _SUCCESS; |
| } |
| |
| exit: |
| return ret; |
| } |
| |
| inline void issue_probereq23a(struct rtw_adapter *padapter, |
| struct cfg80211_ssid *pssid, u8 *da) |
| { |
| _issue_probereq23a(padapter, pssid, da, false); |
| } |
| |
| int issue_probereq23a_ex23a(struct rtw_adapter *padapter, |
| struct cfg80211_ssid *pssid, u8 *da, |
| int try_cnt, int wait_ms) |
| { |
| int ret; |
| int i = 0; |
| unsigned long start = jiffies; |
| |
| do { |
| ret = _issue_probereq23a(padapter, pssid, da, |
| wait_ms > 0 ? true : false); |
| |
| i++; |
| |
| if (padapter->bDriverStopped || padapter->bSurpriseRemoved) |
| break; |
| |
| if (i < try_cnt && wait_ms > 0 && ret == _FAIL) |
| msleep(wait_ms); |
| |
| } while((i < try_cnt) && ((ret == _FAIL) || (wait_ms == 0))); |
| |
| if (ret != _FAIL) { |
| ret = _SUCCESS; |
| goto exit; |
| } |
| |
| if (try_cnt && wait_ms) { |
| if (da) |
| DBG_8723A(FUNC_ADPT_FMT" to "MAC_FMT", ch:%u%s, %d/%d " |
| "in %u ms\n", FUNC_ADPT_ARG(padapter), |
| MAC_ARG(da), rtw_get_oper_ch23a(padapter), |
| ret == _SUCCESS?", acked":"", i, try_cnt, |
| jiffies_to_msecs(jiffies - start)); |
| else |
| DBG_8723A(FUNC_ADPT_FMT", ch:%u%s, %d/%d in %u ms\n", |
| FUNC_ADPT_ARG(padapter), |
| rtw_get_oper_ch23a(padapter), |
| ret == _SUCCESS?", acked":"", i, try_cnt, |
| jiffies_to_msecs(jiffies - start)); |
| } |
| exit: |
| return ret; |
| } |
| |
| /* if psta == NULL, indiate we are station(client) now... */ |
| void issue_auth23a(struct rtw_adapter *padapter, struct sta_info *psta, |
| unsigned short status) |
| { |
| struct xmit_frame *pmgntframe; |
| struct pkt_attrib *pattrib; |
| unsigned char *pframe; |
| struct ieee80211_hdr *pwlanhdr; |
| unsigned short *fctrl; |
| unsigned int val32; |
| unsigned short val16; |
| int use_shared_key = 0; |
| struct xmit_priv *pxmitpriv = &padapter->xmitpriv; |
| struct mlme_ext_priv *pmlmeext = &padapter->mlmeextpriv; |
| struct mlme_ext_info *pmlmeinfo = &pmlmeext->mlmext_info; |
| |
| if ((pmgntframe = alloc_mgtxmitframe23a(pxmitpriv)) == NULL) |
| return; |
| |
| /* update attribute */ |
| pattrib = &pmgntframe->attrib; |
| update_mgntframe_attrib23a(padapter, pattrib); |
| |
| memset(pmgntframe->buf_addr, 0, WLANHDR_OFFSET + TXDESC_OFFSET); |
| |
| pframe = (u8 *)(pmgntframe->buf_addr) + TXDESC_OFFSET; |
| pwlanhdr = (struct ieee80211_hdr *)pframe; |
| |
| fctrl = &pwlanhdr->frame_control; |
| *fctrl = 0; |
| |
| SetSeqNum(pwlanhdr, pmlmeext->mgnt_seq); |
| pmlmeext->mgnt_seq++; |
| SetFrameSubType(pframe, WIFI_AUTH); |
| |
| pframe += sizeof(struct ieee80211_hdr_3addr); |
| pattrib->pktlen = sizeof(struct ieee80211_hdr_3addr); |
| |
| if (psta) { /* for AP mode */ |
| #ifdef CONFIG_8723AU_AP_MODE |
| |
| ether_addr_copy(pwlanhdr->addr1, psta->hwaddr); |
| ether_addr_copy(pwlanhdr->addr2, myid(&padapter->eeprompriv)); |
| ether_addr_copy(pwlanhdr->addr3, myid(&padapter->eeprompriv)); |
| |
| /* setting auth algo number */ |
| val16 = (u16)psta->authalg; |
| |
| if (status != WLAN_STATUS_SUCCESS) |
| val16 = 0; |
| |
| if (val16) { |
| val16 = cpu_to_le16(val16); |
| use_shared_key = 1; |
| } |
| |
| pframe = rtw_set_fixed_ie23a(pframe, _AUTH_ALGM_NUM_, |
| (unsigned char *)&val16, |
| &pattrib->pktlen); |
| |
| /* setting auth seq number */ |
| val16 = (u16)psta->auth_seq; |
| val16 = cpu_to_le16(val16); |
| pframe = rtw_set_fixed_ie23a(pframe, _AUTH_SEQ_NUM_, |
| (unsigned char *)&val16, |
| &pattrib->pktlen); |
| |
| /* setting status code... */ |
| val16 = status; |
| val16 = cpu_to_le16(val16); |
| pframe = rtw_set_fixed_ie23a(pframe, _STATUS_CODE_, |
| (unsigned char *)&val16, |
| &pattrib->pktlen); |
| |
| /* added challenging text... */ |
| if ((psta->auth_seq == 2) && |
| (psta->state & WIFI_FW_AUTH_STATE) && (use_shared_key == 1)) |
| pframe = rtw_set_ie23a(pframe, _CHLGETXT_IE_, 128, |
| psta->chg_txt, &pattrib->pktlen); |
| #endif |
| } else { |
| ether_addr_copy(pwlanhdr->addr1, |
| get_my_bssid23a(&pmlmeinfo->network)); |
| ether_addr_copy(pwlanhdr->addr2, myid(&padapter->eeprompriv)); |
| ether_addr_copy(pwlanhdr->addr3, |
| get_my_bssid23a(&pmlmeinfo->network)); |
| |
| /* setting auth algo number */ |
| /* 0:OPEN System, 1:Shared key */ |
| val16 = (pmlmeinfo->auth_algo == dot11AuthAlgrthm_Shared)? 1: 0; |
| if (val16) { |
| val16 = cpu_to_le16(val16); |
| use_shared_key = 1; |
| } |
| /* DBG_8723A("%s auth_algo = %s auth_seq =%d\n", __func__, |
| (pmlmeinfo->auth_algo == 0)?"OPEN":"SHARED", |
| pmlmeinfo->auth_seq); */ |
| |
| /* setting IV for auth seq #3 */ |
| if ((pmlmeinfo->auth_seq == 3) && |
| (pmlmeinfo->state & WIFI_FW_AUTH_STATE) && |
| (use_shared_key == 1)) { |
| /* DBG_8723A("==> iv(%d), key_index(%d)\n", |
| pmlmeinfo->iv, pmlmeinfo->key_index); */ |
| val32 = ((pmlmeinfo->iv++) | |
| (pmlmeinfo->key_index << 30)); |
| val32 = cpu_to_le32(val32); |
| pframe = rtw_set_fixed_ie23a(pframe, 4, |
| (unsigned char *)&val32, |
| &pattrib->pktlen); |
| |
| pattrib->iv_len = 4; |
| } |
| |
| pframe = rtw_set_fixed_ie23a(pframe, _AUTH_ALGM_NUM_, |
| (unsigned char *)&val16, |
| &pattrib->pktlen); |
| |
| /* setting auth seq number */ |
| val16 = pmlmeinfo->auth_seq; |
| val16 = cpu_to_le16(val16); |
| pframe = rtw_set_fixed_ie23a(pframe, _AUTH_SEQ_NUM_, |
| (unsigned char *)&val16, |
| &pattrib->pktlen); |
| |
| /* setting status code... */ |
| val16 = status; |
| val16 = cpu_to_le16(val16); |
| pframe = rtw_set_fixed_ie23a(pframe, _STATUS_CODE_, |
| (unsigned char *)&val16, |
| &pattrib->pktlen); |
| |
| /* then checking to see if sending challenging text... */ |
| if ((pmlmeinfo->auth_seq == 3) && |
| (pmlmeinfo->state & WIFI_FW_AUTH_STATE) && |
| (use_shared_key == 1)) { |
| pframe = rtw_set_ie23a(pframe, _CHLGETXT_IE_, 128, |
| pmlmeinfo->chg_txt, |
| &pattrib->pktlen); |
| |
| SetPrivacy(fctrl); |
| |
| pattrib->hdrlen = sizeof(struct ieee80211_hdr_3addr); |
| |
| pattrib->encrypt = _WEP40_; |
| |
| pattrib->icv_len = 4; |
| |
| pattrib->pktlen += pattrib->icv_len; |
| } |
| } |
| |
| pattrib->last_txcmdsz = pattrib->pktlen; |
| |
| rtw_wep_encrypt23a(padapter, pmgntframe); |
| DBG_8723A("%s\n", __func__); |
| dump_mgntframe23a(padapter, pmgntframe); |
| |
| return; |
| } |
| |
| void issue_asocrsp23a(struct rtw_adapter *padapter, unsigned short status, |
| struct sta_info *pstat, int pkt_type) |
| { |
| #ifdef CONFIG_8723AU_AP_MODE |
| struct xmit_frame *pmgntframe; |
| struct ieee80211_hdr *pwlanhdr; |
| struct pkt_attrib *pattrib; |
| unsigned char *pbuf, *pframe; |
| unsigned short val; |
| struct xmit_priv *pxmitpriv = &padapter->xmitpriv; |
| struct mlme_priv *pmlmepriv = &padapter->mlmepriv; |
| struct mlme_ext_priv *pmlmeext = &padapter->mlmeextpriv; |
| struct mlme_ext_info *pmlmeinfo = &pmlmeext->mlmext_info; |
| struct wlan_bssid_ex *pnetwork = &pmlmeinfo->network; |
| u8 *ie = pnetwork->IEs; |
| #ifdef CONFIG_8723AU_P2P |
| struct wifidirect_info *pwdinfo = &padapter->wdinfo; |
| u32 wfdielen = 0; |
| #endif /* CONFIG_8723AU_P2P */ |
| |
| DBG_8723A("%s\n", __func__); |
| |
| if ((pmgntframe = alloc_mgtxmitframe23a(pxmitpriv)) == NULL) |
| return; |
| |
| /* update attribute */ |
| pattrib = &pmgntframe->attrib; |
| update_mgntframe_attrib23a(padapter, pattrib); |
| |
| memset(pmgntframe->buf_addr, 0, WLANHDR_OFFSET + TXDESC_OFFSET); |
| |
| pframe = (u8 *)(pmgntframe->buf_addr) + TXDESC_OFFSET; |
| pwlanhdr = (struct ieee80211_hdr *)pframe; |
| |
| pwlanhdr->frame_control = 0; |
| |
| ether_addr_copy(pwlanhdr->addr1, pstat->hwaddr); |
| ether_addr_copy(pwlanhdr->addr2, myid(&padapter->eeprompriv)); |
| ether_addr_copy(pwlanhdr->addr3, get_my_bssid23a(&pmlmeinfo->network)); |
| |
| SetSeqNum(pwlanhdr, pmlmeext->mgnt_seq); |
| pmlmeext->mgnt_seq++; |
| if ((pkt_type == WIFI_ASSOCRSP) || (pkt_type == WIFI_REASSOCRSP)) |
| SetFrameSubType(pwlanhdr, pkt_type); |
| else |
| return; |
| |
| pattrib->hdrlen = sizeof(struct ieee80211_hdr_3addr); |
| pattrib->pktlen += pattrib->hdrlen; |
| pframe += pattrib->hdrlen; |
| |
| /* capability */ |
| val = *(unsigned short *)rtw_get_capability23a_from_ie(ie); |
| |
| pframe = rtw_set_fixed_ie23a(pframe, _CAPABILITY_, |
| (unsigned char *)&val, &pattrib->pktlen); |
| |
| status = cpu_to_le16(status); |
| pframe = rtw_set_fixed_ie23a(pframe, _STATUS_CODE_, |
| (unsigned char *)&status, |
| &pattrib->pktlen); |
| |
| val = cpu_to_le16(pstat->aid | BIT(14) | BIT(15)); |
| pframe = rtw_set_fixed_ie23a(pframe, _ASOC_ID_, (unsigned char *)&val, |
| &pattrib->pktlen); |
| |
| if (pstat->bssratelen <= 8) { |
| pframe = rtw_set_ie23a(pframe, _SUPPORTEDRATES_IE_, |
| pstat->bssratelen, pstat->bssrateset, |
| &pattrib->pktlen); |
| } else { |
| pframe = rtw_set_ie23a(pframe, _SUPPORTEDRATES_IE_, 8, |
| pstat->bssrateset, &pattrib->pktlen); |
| pframe = rtw_set_ie23a(pframe, _EXT_SUPPORTEDRATES_IE_, |
| pstat->bssratelen - 8, |
| pstat->bssrateset + 8, &pattrib->pktlen); |
| } |
| |
| if ((pstat->flags & WLAN_STA_HT) && (pmlmepriv->htpriv.ht_option)) { |
| uint ie_len = 0; |
| |
| /* FILL HT CAP INFO IE */ |
| /* p = hostapd_eid_ht_capabilities_info(hapd, p); */ |
| pbuf = rtw_get_ie23a(ie + _BEACON_IE_OFFSET_, |
| _HT_CAPABILITY_IE_, &ie_len, |
| pnetwork->IELength - _BEACON_IE_OFFSET_); |
| if (pbuf && ie_len>0) { |
| memcpy(pframe, pbuf, ie_len + 2); |
| pframe += (ie_len + 2); |
| pattrib->pktlen += (ie_len + 2); |
| } |
| |
| /* FILL HT ADD INFO IE */ |
| /* p = hostapd_eid_ht_operation(hapd, p); */ |
| pbuf = rtw_get_ie23a(ie + _BEACON_IE_OFFSET_, _HT_ADD_INFO_IE_, |
| &ie_len, |
| pnetwork->IELength - _BEACON_IE_OFFSET_); |
| if (pbuf && ie_len > 0) { |
| memcpy(pframe, pbuf, ie_len + 2); |
| pframe += (ie_len + 2); |
| pattrib->pktlen += (ie_len + 2); |
| } |
| } |
| |
| /* FILL WMM IE */ |
| if ((pstat->flags & WLAN_STA_WME) && pmlmepriv->qospriv.qos_option) { |
| uint ie_len = 0; |
| unsigned char WMM_PARA_IE[] = {0x00, 0x50, 0xf2, 0x02, |
| 0x01, 0x01}; |
| |
| for (pbuf = ie + _BEACON_IE_OFFSET_; ; pbuf += (ie_len + 2)) { |
| pbuf = rtw_get_ie23a(pbuf, _VENDOR_SPECIFIC_IE_, |
| &ie_len, (pnetwork->IELength - |
| _BEACON_IE_OFFSET_ - |
| (ie_len + 2))); |
| if (pbuf && !memcmp(pbuf + 2, WMM_PARA_IE, 6)) { |
| memcpy(pframe, pbuf, ie_len + 2); |
| pframe += (ie_len + 2); |
| pattrib->pktlen += (ie_len + 2); |
| |
| break; |
| } |
| |
| if ((!pbuf) || (ie_len == 0)) |
| break; |
| } |
| } |
| |
| if (pmlmeinfo->assoc_AP_vendor == HT_IOT_PEER_REALTEK) { |
| pframe = rtw_set_ie23a(pframe, _VENDOR_SPECIFIC_IE_, 6, |
| REALTEK_96B_IE23A, &pattrib->pktlen); |
| } |
| |
| /* add WPS IE ie for wps 2.0 */ |
| if (pmlmepriv->wps_assoc_resp_ie && |
| pmlmepriv->wps_assoc_resp_ie_len > 0) { |
| memcpy(pframe, pmlmepriv->wps_assoc_resp_ie, |
| pmlmepriv->wps_assoc_resp_ie_len); |
| |
| pframe += pmlmepriv->wps_assoc_resp_ie_len; |
| pattrib->pktlen += pmlmepriv->wps_assoc_resp_ie_len; |
| } |
| |
| #ifdef CONFIG_8723AU_P2P |
| if (rtw_p2p_chk_role(pwdinfo, P2P_ROLE_GO) && |
| pwdinfo->wfd_info->wfd_enable) { |
| wfdielen = build_assoc_resp_wfd_ie(pwdinfo, pframe); |
| pframe += wfdielen; |
| pattrib->pktlen += wfdielen; |
| } |
| #endif /* CONFIG_8723AU_P2P */ |
| |
| pattrib->last_txcmdsz = pattrib->pktlen; |
| |
| dump_mgntframe23a(padapter, pmgntframe); |
| #endif |
| } |
| |
| void issue_assocreq23a(struct rtw_adapter *padapter) |
| { |
| int ret = _FAIL; |
| struct xmit_frame *pmgntframe; |
| struct pkt_attrib *pattrib; |
| unsigned char *pframe, *p; |
| struct ieee80211_hdr *pwlanhdr; |
| unsigned short *fctrl; |
| unsigned short val16; |
| unsigned int i, j, ie_len, index = 0; |
| unsigned char rf_type, bssrate[NumRates], sta_bssrate[NumRates]; |
| struct ndis_802_11_var_ies *pIE; |
| struct registry_priv *pregpriv = &padapter->registrypriv; |
| struct xmit_priv *pxmitpriv = &padapter->xmitpriv; |
| struct mlme_priv *pmlmepriv = &padapter->mlmepriv; |
| struct mlme_ext_priv *pmlmeext = &padapter->mlmeextpriv; |
| struct mlme_ext_info *pmlmeinfo = &pmlmeext->mlmext_info; |
| int bssrate_len = 0, sta_bssrate_len = 0; |
| #ifdef CONFIG_8723AU_P2P |
| struct wifidirect_info *pwdinfo = &padapter->wdinfo; |
| u8 p2pie[255] = { 0x00 }; |
| u16 p2pielen = 0; |
| u32 wfdielen = 0; |
| #endif /* CONFIG_8723AU_P2P */ |
| |
| if ((pmgntframe = alloc_mgtxmitframe23a(pxmitpriv)) == NULL) |
| goto exit; |
| |
| /* update attribute */ |
| pattrib = &pmgntframe->attrib; |
| update_mgntframe_attrib23a(padapter, pattrib); |
| |
| memset(pmgntframe->buf_addr, 0, WLANHDR_OFFSET + TXDESC_OFFSET); |
| |
| pframe = (u8 *)(pmgntframe->buf_addr) + TXDESC_OFFSET; |
| pwlanhdr = (struct ieee80211_hdr *)pframe; |
| |
| fctrl = &pwlanhdr->frame_control; |
| *fctrl = 0; |
| ether_addr_copy(pwlanhdr->addr1, get_my_bssid23a(&pmlmeinfo->network)); |
| ether_addr_copy(pwlanhdr->addr2, myid(&padapter->eeprompriv)); |
| ether_addr_copy(pwlanhdr->addr3, get_my_bssid23a(&pmlmeinfo->network)); |
| |
| SetSeqNum(pwlanhdr, pmlmeext->mgnt_seq); |
| pmlmeext->mgnt_seq++; |
| SetFrameSubType(pframe, WIFI_ASSOCREQ); |
| |
| pframe += sizeof(struct ieee80211_hdr_3addr); |
| pattrib->pktlen = sizeof(struct ieee80211_hdr_3addr); |
| |
| /* caps */ |
| memcpy(pframe, rtw_get_capability23a_from_ie(pmlmeinfo->network.IEs), |
| 2); |
| |
| pframe += 2; |
| pattrib->pktlen += 2; |
| |
| /* listen interval */ |
| /* todo: listen interval for power saving */ |
| val16 = cpu_to_le16(3); |
| memcpy(pframe, (unsigned char *)&val16, 2); |
| pframe += 2; |
| pattrib->pktlen += 2; |
| |
| /* SSID */ |
| pframe = rtw_set_ie23a(pframe, _SSID_IE_, |
| pmlmeinfo->network.Ssid.ssid_len, |
| pmlmeinfo->network.Ssid.ssid, &pattrib->pktlen); |
| |
| /* supported rate & extended supported rate */ |
| |
| get_rate_set23a(padapter, sta_bssrate, &sta_bssrate_len); |
| /* DBG_8723A("sta_bssrate_len =%d\n", sta_bssrate_len); */ |
| |
| /* for JAPAN, channel 14 can only uses B Mode(CCK) */ |
| if (pmlmeext->cur_channel == 14) |
| sta_bssrate_len = 4; |
| |
| /* for (i = 0; i < sta_bssrate_len; i++) { */ |
| /* DBG_8723A("sta_bssrate[%d]=%02X\n", i, sta_bssrate[i]); */ |
| /* */ |
| |
| for (i = 0; i < NDIS_802_11_LENGTH_RATES_EX; i++) { |
| if (pmlmeinfo->network.SupportedRates[i] == 0) |
| break; |
| DBG_8723A("network.SupportedRates[%d]=%02X\n", i, |
| pmlmeinfo->network.SupportedRates[i]); |
| } |
| |
| for (i = 0; i < NDIS_802_11_LENGTH_RATES_EX; i++) { |
| if (pmlmeinfo->network.SupportedRates[i] == 0) |
| break; |
| |
| /* Check if the AP's supported rates are also |
| supported by STA. */ |
| for (j = 0; j < sta_bssrate_len; j++) { |
| /* Avoid the proprietary data rate (22Mbps) of |
| Handlink WSG-4000 AP */ |
| if ((pmlmeinfo->network.SupportedRates[i] | |
| IEEE80211_BASIC_RATE_MASK) == |
| (sta_bssrate[j]|IEEE80211_BASIC_RATE_MASK)) { |
| /* DBG_8723A("match i = %d, j =%d\n", i, j); */ |
| break; |
| } |
| } |
| |
| if (j == sta_bssrate_len) { |
| /* the rate is not supported by STA */ |
| DBG_8723A("%s(): the rate[%d]=%02X is not supported by " |
| "STA!\n", __func__, i, |
| pmlmeinfo->network.SupportedRates[i]); |
| } else { |
| /* the rate is supported by STA */ |
| bssrate[index++] = pmlmeinfo->network.SupportedRates[i]; |
| } |
| } |
| |
| bssrate_len = index; |
| DBG_8723A("bssrate_len = %d\n", bssrate_len); |
| |
| if (bssrate_len == 0) { |
| rtw_free_xmitbuf23a(pxmitpriv, pmgntframe->pxmitbuf); |
| rtw_free_xmitframe23a(pxmitpriv, pmgntframe); |
| goto exit; /* don't connect to AP if no joint supported rate */ |
| } |
| |
| if (bssrate_len > 8) { |
| pframe = rtw_set_ie23a(pframe, _SUPPORTEDRATES_IE_, 8, |
| bssrate, &pattrib->pktlen); |
| pframe = rtw_set_ie23a(pframe, _EXT_SUPPORTEDRATES_IE_, |
| (bssrate_len - 8), (bssrate + 8), |
| &pattrib->pktlen); |
| } else |
| pframe = rtw_set_ie23a(pframe, _SUPPORTEDRATES_IE_, |
| bssrate_len, bssrate, &pattrib->pktlen); |
| |
| /* RSN */ |
| p = rtw_get_ie23a((pmlmeinfo->network.IEs + |
| sizeof(struct ndis_802_11_fixed_ies)), _RSN_IE_2_, |
| &ie_len, (pmlmeinfo->network.IELength - |
| sizeof(struct ndis_802_11_fixed_ies))); |
| if (p) |
| pframe = rtw_set_ie23a(pframe, _RSN_IE_2_, ie_len, (p + 2), |
| &pattrib->pktlen); |
| |
| /* HT caps */ |
| if (padapter->mlmepriv.htpriv.ht_option == true) { |
| p = rtw_get_ie23a((pmlmeinfo->network.IEs + |
| sizeof(struct ndis_802_11_fixed_ies)), |
| _HT_CAPABILITY_IE_, &ie_len, |
| (pmlmeinfo->network.IELength - |
| sizeof(struct ndis_802_11_fixed_ies))); |
| if ((p != NULL) && (!(is_ap_in_tkip23a(padapter)))) { |
| memcpy(&pmlmeinfo->HT_caps, (p + 2), |
| sizeof(struct HT_caps_element)); |
| |
| /* to disable 40M Hz support while gd_bw_40MHz_en = 0 */ |
| if (pregpriv->cbw40_enable == 0) { |
| pmlmeinfo->HT_caps.u.HT_cap_element.HT_caps_info &= (~(BIT(6) | BIT(1))); |
| } else { |
| pmlmeinfo->HT_caps.u.HT_cap_element.HT_caps_info |= BIT(1); |
| } |
| |
| /* todo: disable SM power save mode */ |
| pmlmeinfo->HT_caps.u.HT_cap_element.HT_caps_info |= |
| 0x000c; |
| |
| rtw23a_hal_get_hwreg(padapter, HW_VAR_RF_TYPE, |
| (u8 *)(&rf_type)); |
| /* switch (pregpriv->rf_config) */ |
| switch (rf_type) |
| { |
| case RF_1T1R: |
| |
| if (pregpriv->rx_stbc) |
| pmlmeinfo->HT_caps.u.HT_cap_element.HT_caps_info |= cpu_to_le16(0x0100);/* RX STBC One spatial stream */ |
| |
| memcpy(pmlmeinfo->HT_caps.u.HT_cap_element.MCS_rate, MCS_rate_1R23A, 16); |
| break; |
| |
| case RF_2T2R: |
| case RF_1T2R: |
| default: |
| |
| /* enable for 2.4/5 GHz */ |
| if ((pregpriv->rx_stbc == 0x3) || |
| ((pmlmeext->cur_wireless_mode & |
| WIRELESS_11_24N) && |
| /* enable for 2.4GHz */ |
| (pregpriv->rx_stbc == 0x1)) || |
| ((pmlmeext->cur_wireless_mode & |
| WIRELESS_11_5N) && |
| (pregpriv->rx_stbc == 0x2)) || |
| /* enable for 5GHz */ |
| (pregpriv->wifi_spec == 1)) { |
| DBG_8723A("declare supporting RX " |
| "STBC\n"); |
| pmlmeinfo->HT_caps.u.HT_cap_element.HT_caps_info |= cpu_to_le16(0x0200);/* RX STBC two spatial stream */ |
| } |
| memcpy(pmlmeinfo->HT_caps.u.HT_cap_element.MCS_rate, MCS_rate_2R23A, 16); |
| break; |
| } |
| pmlmeinfo->HT_caps.u.HT_cap_element.HT_caps_info = |
| cpu_to_le16(pmlmeinfo->HT_caps.u.HT_cap_element.HT_caps_info); |
| |
| #ifdef CONFIG_8723AU_BT_COEXIST |
| if (BT_1Ant(padapter) == true) { |
| /* set to 8K */ |
| pmlmeinfo->HT_caps.u.HT_cap_element.AMPDU_para &= (u8)~IEEE80211_HT_AMPDU_PARM_FACTOR; |
| /* pmlmeinfo->HT_caps.u.HT_cap_element.AMPDU_para |= MAX_AMPDU_FACTOR_8K */ |
| } |
| #endif |
| |
| pframe = rtw_set_ie23a(pframe, _HT_CAPABILITY_IE_, |
| ie_len, |
| (u8 *)&pmlmeinfo->HT_caps, |
| &pattrib->pktlen); |
| } |
| } |
| |
| /* vendor specific IE, such as WPA, WMM, WPS */ |
| for (i = sizeof(struct ndis_802_11_fixed_ies); |
| i < pmlmeinfo->network.IELength;) { |
| pIE = (struct ndis_802_11_var_ies *) |
| (pmlmeinfo->network.IEs + i); |
| |
| switch (pIE->ElementID) |
| { |
| case _VENDOR_SPECIFIC_IE_: |
| if (!memcmp(pIE->data, RTW_WPA_OUI23A, 4) || |
| !memcmp(pIE->data, WMM_OUI23A, 4) || |
| !memcmp(pIE->data, WPS_OUI23A, 4)) { |
| if (!padapter->registrypriv.wifi_spec) { |
| /* Commented by Kurt 20110629 */ |
| /* In some older APs, WPS handshake */ |
| /* would be fail if we append vender |
| extensions informations to AP */ |
| if (!memcmp(pIE->data, WPS_OUI23A, 4)) |
| pIE->Length = 14; |
| } |
| pframe = rtw_set_ie23a(pframe, |
| _VENDOR_SPECIFIC_IE_, |
| pIE->Length, pIE->data, |
| &pattrib->pktlen); |
| } |
| break; |
| |
| default: |
| break; |
| } |
| |
| i += (pIE->Length + 2); |
| } |
| |
| if (pmlmeinfo->assoc_AP_vendor == HT_IOT_PEER_REALTEK) |
| pframe = rtw_set_ie23a(pframe, _VENDOR_SPECIFIC_IE_, 6, |
| REALTEK_96B_IE23A, &pattrib->pktlen); |
| |
| #ifdef CONFIG_8723AU_P2P |
| |
| if (wdev_to_priv(padapter->rtw_wdev)->p2p_enabled) { |
| if (pmlmepriv->p2p_assoc_req_ie && |
| pmlmepriv->p2p_assoc_req_ie_len>0) { |
| memcpy(pframe, pmlmepriv->p2p_assoc_req_ie, |
| pmlmepriv->p2p_assoc_req_ie_len); |
| pframe += pmlmepriv->p2p_assoc_req_ie_len; |
| pattrib->pktlen += pmlmepriv->p2p_assoc_req_ie_len; |
| } |
| } else { |
| if (!rtw_p2p_chk_state(pwdinfo, P2P_STATE_NONE) && |
| !rtw_p2p_chk_state(pwdinfo, P2P_STATE_IDLE)) { |
| /* Should add the P2P IE in the association |
| request frame. */ |
| /* P2P OUI */ |
| |
| p2pielen = 0; |
| p2pie[p2pielen++] = 0x50; |
| p2pie[p2pielen++] = 0x6F; |
| p2pie[p2pielen++] = 0x9A; |
| p2pie[p2pielen++] = 0x09; /* WFA P2P v1.0 */ |
| |
| /* Commented by Albert 20101109 */ |
| /* According to the P2P Specification, the |
| association request frame should contain |
| 3 P2P attributes */ |
| /* 1. P2P Capability */ |
| /* 2. Extended Listen Timing */ |
| /* 3. Device Info */ |
| /* Commented by Albert 20110516 */ |
| /* 4. P2P Interface */ |
| |
| /* P2P Capability */ |
| /* Type: */ |
| p2pie[p2pielen++] = P2P_ATTR_CAPABILITY; |
| |
| /* Length: */ |
| *(u16*) (p2pie + p2pielen) = cpu_to_le16(0x0002); |
| p2pielen += 2; |
| |
| /* Value: */ |
| /* Device Capability Bitmap, 1 byte */ |
| p2pie[p2pielen++] = DMP_P2P_DEVCAP_SUPPORT; |
| |
| /* Group Capability Bitmap, 1 byte */ |
| if (pwdinfo->persistent_supported) |
| p2pie[p2pielen++] = |
| P2P_GRPCAP_PERSISTENT_GROUP | |
| DMP_P2P_GRPCAP_SUPPORT; |
| else |
| p2pie[p2pielen++] = DMP_P2P_GRPCAP_SUPPORT; |
| |
| /* Extended Listen Timing */ |
| /* Type: */ |
| p2pie[p2pielen++] = P2P_ATTR_EX_LISTEN_TIMING; |
| |
| /* Length: */ |
| *(u16*) (p2pie + p2pielen) = cpu_to_le16(0x0004); |
| p2pielen += 2; |
| |
| /* Value: */ |
| /* Availability Period */ |
| *(u16*) (p2pie + p2pielen) = cpu_to_le16(0xFFFF); |
| p2pielen += 2; |
| |
| /* Availability Interval */ |
| *(u16*) (p2pie + p2pielen) = cpu_to_le16(0xFFFF); |
| p2pielen += 2; |
| |
| /* Device Info */ |
| /* Type: */ |
| p2pie[p2pielen++] = P2P_ATTR_DEVICE_INFO; |
| |
| /* Length: */ |
| /* 21 -> P2P Device Address (6bytes) + Config |
| Methods (2bytes) + Primary Device |
| Type (8bytes) */ |
| /* + NumofSecondDevType (1byte) + WPS Device |
| Name ID field (2bytes) + WPS Device Name |
| Len field (2bytes) */ |
| *(u16*) (p2pie + p2pielen) = |
| cpu_to_le16(21 + pwdinfo->device_name_len); |
| p2pielen += 2; |
| |
| /* Value: */ |
| /* P2P Device Address */ |
| memcpy(p2pie + p2pielen, |
| myid(&padapter->eeprompriv), ETH_ALEN); |
| p2pielen += ETH_ALEN; |
| |
| /* Config Method */ |
| /* This field should be big endian. |
| Noted by P2P specification. */ |
| if ((pwdinfo->ui_got_wps_info == |
| P2P_GOT_WPSINFO_PEER_DISPLAY_PIN) || |
| (pwdinfo->ui_got_wps_info == |
| P2P_GOT_WPSINFO_SELF_DISPLAY_PIN)) |
| *(u16*) (p2pie + p2pielen) = |
| cpu_to_be16(WPS_CONFIG_METHOD_DISPLAY); |
| else |
| *(u16*) (p2pie + p2pielen) = |
| cpu_to_be16(WPS_CONFIG_METHOD_PBC); |
| |
| p2pielen += 2; |
| |
| /* Primary Device Type */ |
| /* Category ID */ |
| *(u16*) (p2pie + p2pielen) = |
| cpu_to_be16(WPS_PDT_CID_MULIT_MEDIA); |
| p2pielen += 2; |
| |
| /* OUI */ |
| *(u32*) (p2pie + p2pielen) = cpu_to_be32(WPSOUI); |
| p2pielen += 4; |
| |
| /* Sub Category ID */ |
| *(u16*) (p2pie + p2pielen) = |
| cpu_to_be16(WPS_PDT_SCID_MEDIA_SERVER); |
| p2pielen += 2; |
| |
| /* Number of Secondary Device Types */ |
| /* No Secondary Device Type List */ |
| p2pie[p2pielen++] = 0x00; |
| |
| /* Device Name */ |
| /* Type: */ |
| *(u16*) (p2pie + p2pielen) = |
| cpu_to_be16(WPS_ATTR_DEVICE_NAME); |
| p2pielen += 2; |
| |
| /* Length: */ |
| *(u16*) (p2pie + p2pielen) = |
| cpu_to_be16(pwdinfo->device_name_len); |
| p2pielen += 2; |
| |
| /* Value: */ |
| memcpy(p2pie + p2pielen, pwdinfo->device_name, |
| pwdinfo->device_name_len); |
| p2pielen += pwdinfo->device_name_len; |
| |
| /* P2P Interface */ |
| /* Type: */ |
| p2pie[p2pielen++] = P2P_ATTR_INTERFACE; |
| |
| /* Length: */ |
| *(u16*) (p2pie + p2pielen) = cpu_to_le16(0x000D); |
| p2pielen += 2; |
| |
| /* Value: */ |
| memcpy(p2pie + p2pielen, pwdinfo->device_addr, |
| ETH_ALEN); /* P2P Device Address */ |
| p2pielen += ETH_ALEN; |
| |
| /* P2P Interface Address Count */ |
| p2pie[p2pielen++] = 1; |
| |
| memcpy(p2pie + p2pielen, pwdinfo->device_addr, |
| ETH_ALEN); /* P2P Interface Address List */ |
| p2pielen += ETH_ALEN; |
| |
| pframe = rtw_set_ie23a(pframe, _VENDOR_SPECIFIC_IE_, |
| p2pielen, (unsigned char *)p2pie, |
| &pattrib->pktlen); |
| |
| /* wfdielen = build_assoc_req_wfd_ie(pwdinfo, pframe);*/ |
| /* pframe += wfdielen; */ |
| /* pattrib->pktlen += wfdielen; */ |
| } |
| } |
| |
| if (true == pwdinfo->wfd_info->wfd_enable) { |
| wfdielen = build_assoc_req_wfd_ie(pwdinfo, pframe); |
| pframe += wfdielen; |
| pattrib->pktlen += wfdielen; |
| } else if (pmlmepriv->wfd_assoc_req_ie != NULL && |
| pmlmepriv->wfd_assoc_req_ie_len > 0) { |
| /* WFD IE */ |
| memcpy(pframe, pmlmepriv->wfd_assoc_req_ie, |
| pmlmepriv->wfd_assoc_req_ie_len); |
| pattrib->pktlen += pmlmepriv->wfd_assoc_req_ie_len; |
| pframe += pmlmepriv->wfd_assoc_req_ie_len; |
| } |
| #endif /* CONFIG_8723AU_P2P */ |
| |
| pattrib->last_txcmdsz = pattrib->pktlen; |
| dump_mgntframe23a(padapter, pmgntframe); |
| |
| ret = _SUCCESS; |
| |
| exit: |
| pmlmepriv->assoc_req_len = 0; |
| if (ret == _SUCCESS) { |
| kfree(pmlmepriv->assoc_req); |
| pmlmepriv->assoc_req = kmalloc(pattrib->pktlen, GFP_ATOMIC); |
| if (pmlmepriv->assoc_req) { |
| memcpy(pmlmepriv->assoc_req, pwlanhdr, |
| pattrib->pktlen); |
| pmlmepriv->assoc_req_len = pattrib->pktlen; |
| } |
| } else |
| kfree(pmlmepriv->assoc_req); |
| |
| return; |
| } |
| |
| /* when wait_ack is ture, this function shoule be called at process context */ |
| static int _issue_nulldata23a(struct rtw_adapter *padapter, unsigned char *da, |
| unsigned int power_mode, int wait_ack) |
| { |
| int ret = _FAIL; |
| struct xmit_frame *pmgntframe; |
| struct pkt_attrib *pattrib; |
| unsigned char *pframe; |
| struct ieee80211_hdr *pwlanhdr; |
| unsigned short *fctrl; |
| struct xmit_priv *pxmitpriv; |
| struct mlme_ext_priv *pmlmeext; |
| struct mlme_ext_info *pmlmeinfo; |
| |
| /* DBG_8723A("%s:%d\n", __func__, power_mode); */ |
| |
| if (!padapter) |
| goto exit; |
| |
| pxmitpriv = &padapter->xmitpriv; |
| pmlmeext = &padapter->mlmeextpriv; |
| pmlmeinfo = &pmlmeext->mlmext_info; |
| |
| if ((pmgntframe = alloc_mgtxmitframe23a(pxmitpriv)) == NULL) |
| goto exit; |
| |
| /* update attribute */ |
| pattrib = &pmgntframe->attrib; |
| update_mgntframe_attrib23a(padapter, pattrib); |
| pattrib->retry_ctrl = false; |
| |
| memset(pmgntframe->buf_addr, 0, WLANHDR_OFFSET + TXDESC_OFFSET); |
| |
| pframe = (u8 *)(pmgntframe->buf_addr) + TXDESC_OFFSET; |
| pwlanhdr = (struct ieee80211_hdr *)pframe; |
| |
| fctrl = &pwlanhdr->frame_control; |
| *fctrl = 0; |
| |
| if ((pmlmeinfo->state&0x03) == WIFI_FW_AP_STATE) |
| SetFrDs(fctrl); |
| else if ((pmlmeinfo->state&0x03) == WIFI_FW_STATION_STATE) |
| SetToDs(fctrl); |
| |
| if (power_mode) |
| SetPwrMgt(fctrl); |
| |
| ether_addr_copy(pwlanhdr->addr1, da); |
| ether_addr_copy(pwlanhdr->addr2, myid(&padapter->eeprompriv)); |
| ether_addr_copy(pwlanhdr->addr3, get_my_bssid23a(&pmlmeinfo->network)); |
| |
| SetSeqNum(pwlanhdr, pmlmeext->mgnt_seq); |
| pmlmeext->mgnt_seq++; |
| SetFrameSubType(pframe, WIFI_DATA_NULL); |
| |
| pframe += sizeof(struct ieee80211_hdr_3addr); |
| pattrib->pktlen = sizeof(struct ieee80211_hdr_3addr); |
| |
| pattrib->last_txcmdsz = pattrib->pktlen; |
| |
| if (wait_ack) |
| ret = dump_mgntframe23a_and_wait_ack23a(padapter, pmgntframe); |
| else { |
| dump_mgntframe23a(padapter, pmgntframe); |
| ret = _SUCCESS; |
| } |
| |
| exit: |
| return ret; |
| } |
| |
| /* when wait_ms >0 , this function shoule be called at process context */ |
| /* da == NULL for station mode */ |
| int issue_nulldata23a(struct rtw_adapter *padapter, unsigned char *da, |
| unsigned int power_mode, int try_cnt, int wait_ms) |
| { |
| int ret; |
| int i = 0; |
| unsigned long start = jiffies; |
| struct mlme_ext_priv *pmlmeext = &padapter->mlmeextpriv; |
| struct mlme_ext_info *pmlmeinfo = &pmlmeext->mlmext_info; |
| |
| /* da == NULL, assum it's null data for sta to ap*/ |
| if (da == NULL) |
| da = get_my_bssid23a(&pmlmeinfo->network); |
| |
| do { |
| ret = _issue_nulldata23a(padapter, da, power_mode, |
| wait_ms > 0 ? true : false); |
| |
| i++; |
| |
| if (padapter->bDriverStopped || padapter->bSurpriseRemoved) |
| break; |
| |
| if (i < try_cnt && wait_ms > 0 && ret == _FAIL) |
| msleep(wait_ms); |
| |
| } while((i < try_cnt) && ((ret == _FAIL) || (wait_ms == 0))); |
| |
| if (ret != _FAIL) { |
| ret = _SUCCESS; |
| goto exit; |
| } |
| |
| if (try_cnt && wait_ms) { |
| if (da) |
| DBG_8723A(FUNC_ADPT_FMT" to "MAC_FMT", ch:%u%s, %d/%d " |
| "in %u ms\n", FUNC_ADPT_ARG(padapter), |
| MAC_ARG(da), rtw_get_oper_ch23a(padapter), |
| ret == _SUCCESS?", acked":"", i, try_cnt, |
| jiffies_to_msecs(jiffies - start)); |
| else |
| DBG_8723A(FUNC_ADPT_FMT", ch:%u%s, %d/%d in %u ms\n", |
| FUNC_ADPT_ARG(padapter), |
| rtw_get_oper_ch23a(padapter), |
| ret == _SUCCESS?", acked":"", i, try_cnt, |
| jiffies_to_msecs(jiffies - start)); |
| } |
| exit: |
| return ret; |
| } |
| |
| /* when wait_ack is ture, this function shoule be called at process context */ |
| static int _issue_qos_nulldata23a(struct rtw_adapter *padapter, |
| unsigned char *da, u16 tid, int wait_ack) |
| { |
| int ret = _FAIL; |
| struct xmit_frame *pmgntframe; |
| struct pkt_attrib *pattrib; |
| unsigned char *pframe; |
| struct ieee80211_hdr *pwlanhdr; |
| unsigned short *fctrl, *qc; |
| struct xmit_priv *pxmitpriv = &padapter->xmitpriv; |
| struct mlme_ext_priv *pmlmeext = &padapter->mlmeextpriv; |
| struct mlme_ext_info *pmlmeinfo = &pmlmeext->mlmext_info; |
| |
| DBG_8723A("%s\n", __func__); |
| |
| if ((pmgntframe = alloc_mgtxmitframe23a(pxmitpriv)) == NULL) |
| goto exit; |
| |
| /* update attribute */ |
| pattrib = &pmgntframe->attrib; |
| update_mgntframe_attrib23a(padapter, pattrib); |
| |
| pattrib->hdrlen += 2; |
| pattrib->qos_en = true; |
| pattrib->eosp = 1; |
| pattrib->ack_policy = 0; |
| pattrib->mdata = 0; |
| |
| memset(pmgntframe->buf_addr, 0, WLANHDR_OFFSET + TXDESC_OFFSET); |
| |
| pframe = (u8 *)(pmgntframe->buf_addr) + TXDESC_OFFSET; |
| pwlanhdr = (struct ieee80211_hdr *)pframe; |
| |
| fctrl = &pwlanhdr->frame_control; |
| *fctrl = 0; |
| |
| if ((pmlmeinfo->state&0x03) == WIFI_FW_AP_STATE) |
| SetFrDs(fctrl); |
| else if ((pmlmeinfo->state&0x03) == WIFI_FW_STATION_STATE) |
| SetToDs(fctrl); |
| |
| if (pattrib->mdata) |
| SetMData(fctrl); |
| |
| qc = (unsigned short *)(pframe + pattrib->hdrlen - 2); |
| |
| SetPriority(qc, tid); |
| |
| SetEOSP(qc, pattrib->eosp); |
| |
| SetAckpolicy(qc, pattrib->ack_policy); |
| |
| ether_addr_copy(pwlanhdr->addr1, da); |
| ether_addr_copy(pwlanhdr->addr2, myid(&padapter->eeprompriv)); |
| ether_addr_copy(pwlanhdr->addr3, get_my_bssid23a(&pmlmeinfo->network)); |
| |
| SetSeqNum(pwlanhdr, pmlmeext->mgnt_seq); |
| pmlmeext->mgnt_seq++; |
| SetFrameSubType(pframe, WIFI_QOS_DATA_NULL); |
| |
| pframe += sizeof(struct ieee80211_qos_hdr); |
| pattrib->pktlen = sizeof(struct ieee80211_qos_hdr); |
| |
| pattrib->last_txcmdsz = pattrib->pktlen; |
| |
| if (wait_ack) |
| ret = dump_mgntframe23a_and_wait_ack23a(padapter, pmgntframe); |
| else { |
| dump_mgntframe23a(padapter, pmgntframe); |
| ret = _SUCCESS; |
| } |
| |
| exit: |
| return ret; |
| } |
| |
| /* when wait_ms >0 , this function shoule be called at process context */ |
| /* da == NULL for station mode */ |
| int issue_qos_nulldata23a(struct rtw_adapter *padapter, unsigned char *da, |
| u16 tid, int try_cnt, int wait_ms) |
| { |
| int ret; |
| int i = 0; |
| unsigned long start = jiffies; |
| struct mlme_ext_priv *pmlmeext = &padapter->mlmeextpriv; |
| struct mlme_ext_info *pmlmeinfo = &pmlmeext->mlmext_info; |
| |
| /* da == NULL, assum it's null data for sta to ap*/ |
| if (da == NULL) |
| da = get_my_bssid23a(&pmlmeinfo->network); |
| |
| do { |
| ret = _issue_qos_nulldata23a(padapter, da, tid, |
| wait_ms > 0 ? true : false); |
| |
| i++; |
| |
| if (padapter->bDriverStopped || padapter->bSurpriseRemoved) |
| break; |
| |
| if (i < try_cnt && wait_ms > 0 && ret == _FAIL) |
| msleep(wait_ms); |
| } while((i < try_cnt) && ((ret == _FAIL)||(wait_ms == 0))); |
| |
| if (ret != _FAIL) { |
| ret = _SUCCESS; |
| goto exit; |
| } |
| |
| if (try_cnt && wait_ms) { |
| if (da) |
| DBG_8723A(FUNC_ADPT_FMT" to "MAC_FMT", ch:%u%s, %d/%d " |
| "in %u ms\n", FUNC_ADPT_ARG(padapter), |
| MAC_ARG(da), rtw_get_oper_ch23a(padapter), |
| ret == _SUCCESS?", acked":"", i, try_cnt, |
| jiffies_to_msecs(jiffies - start)); |
| else |
| DBG_8723A(FUNC_ADPT_FMT", ch:%u%s, %d/%d in %u ms\n", |
| FUNC_ADPT_ARG(padapter), |
| rtw_get_oper_ch23a(padapter), |
| ret == _SUCCESS?", acked":"", i, try_cnt, |
| jiffies_to_msecs(jiffies - start)); |
| } |
| exit: |
| return ret; |
| } |
| |
| static int _issue_deauth23a(struct rtw_adapter *padapter, unsigned char *da, |
| unsigned short reason, u8 wait_ack) |
| { |
| struct xmit_frame *pmgntframe; |
| struct pkt_attrib *pattrib; |
| unsigned char *pframe; |
| struct ieee80211_hdr *pwlanhdr; |
| unsigned short *fctrl; |
| struct xmit_priv *pxmitpriv = &padapter->xmitpriv; |
| struct mlme_ext_priv *pmlmeext = &padapter->mlmeextpriv; |
| struct mlme_ext_info *pmlmeinfo = &pmlmeext->mlmext_info; |
| int ret = _FAIL; |
| #ifdef CONFIG_8723AU_P2P |
| struct wifidirect_info *pwdinfo = &padapter->wdinfo; |
| #endif /* CONFIG_8723AU_P2P */ |
| |
| /* DBG_8723A("%s to "MAC_FMT"\n", __func__, MAC_ARG(da)); */ |
| |
| #ifdef CONFIG_8723AU_P2P |
| if (!(rtw_p2p_chk_state(pwdinfo, P2P_STATE_NONE)) && |
| (pwdinfo->rx_invitereq_info.scan_op_ch_only)) { |
| mod_timer(&pwdinfo->reset_ch_sitesurvey, |
| jiffies + msecs_to_jiffies(10)); |
| } |
| #endif /* CONFIG_8723AU_P2P */ |
| |
| if ((pmgntframe = alloc_mgtxmitframe23a(pxmitpriv)) == NULL) |
| goto exit; |
| |
| /* update attribute */ |
| pattrib = &pmgntframe->attrib; |
| update_mgntframe_attrib23a(padapter, pattrib); |
| pattrib->retry_ctrl = false; |
| |
| memset(pmgntframe->buf_addr, 0, WLANHDR_OFFSET + TXDESC_OFFSET); |
| |
| pframe = (u8 *)(pmgntframe->buf_addr) + TXDESC_OFFSET; |
| pwlanhdr = (struct ieee80211_hdr *)pframe; |
| |
| fctrl = &pwlanhdr->frame_control; |
| *fctrl = 0; |
| |
| ether_addr_copy(pwlanhdr->addr1, da); |
| ether_addr_copy(pwlanhdr->addr2, myid(&padapter->eeprompriv)); |
| ether_addr_copy(pwlanhdr->addr3, get_my_bssid23a(&pmlmeinfo->network)); |
| |
| SetSeqNum(pwlanhdr, pmlmeext->mgnt_seq); |
| pmlmeext->mgnt_seq++; |
| SetFrameSubType(pframe, WIFI_DEAUTH); |
| |
| pframe += sizeof(struct ieee80211_hdr_3addr); |
| pattrib->pktlen = sizeof(struct ieee80211_hdr_3addr); |
| |
| reason = cpu_to_le16(reason); |
| pframe = rtw_set_fixed_ie23a(pframe, WLAN_REASON_PREV_AUTH_NOT_VALID, |
| (unsigned char *)&reason, |
| &pattrib->pktlen); |
| |
| pattrib->last_txcmdsz = pattrib->pktlen; |
| |
| if (wait_ack) |
| ret = dump_mgntframe23a_and_wait_ack23a(padapter, pmgntframe); |
| else { |
| dump_mgntframe23a(padapter, pmgntframe); |
| ret = _SUCCESS; |
| } |
| |
| exit: |
| return ret; |
| } |
| |
| int issue_deauth23a(struct rtw_adapter *padapter, unsigned char *da, |
| unsigned short reason) |
| { |
| DBG_8723A("%s to "MAC_FMT"\n", __func__, MAC_ARG(da)); |
| return _issue_deauth23a(padapter, da, reason, false); |
| } |
| |
| int issue_deauth23a_ex23a(struct rtw_adapter *padapter, u8 *da, |
| unsigned short reason, int try_cnt, int wait_ms) |
| { |
| int ret; |
| int i = 0; |
| unsigned long start = jiffies; |
| |
| do { |
| ret = _issue_deauth23a(padapter, da, reason, |
| wait_ms >0 ? true : false); |
| |
| i++; |
| |
| if (padapter->bDriverStopped || padapter->bSurpriseRemoved) |
| break; |
| |
| if (i < try_cnt && wait_ms > 0 && ret == _FAIL) |
| msleep(wait_ms); |
| |
| } while((i < try_cnt) && ((ret == _FAIL)||(wait_ms == 0))); |
| |
| if (ret != _FAIL) { |
| ret = _SUCCESS; |
| goto exit; |
| } |
| |
| if (try_cnt && wait_ms) { |
| if (da) |
| DBG_8723A(FUNC_ADPT_FMT" to "MAC_FMT", ch:%u%s, %d/%d " |
| "in %u ms\n", FUNC_ADPT_ARG(padapter), |
| MAC_ARG(da), rtw_get_oper_ch23a(padapter), |
| ret == _SUCCESS?", acked":"", i, try_cnt, |
| jiffies_to_msecs(jiffies - start)); |
| else |
| DBG_8723A(FUNC_ADPT_FMT", ch:%u%s, %d/%d in %u ms\n", |
| FUNC_ADPT_ARG(padapter), |
| rtw_get_oper_ch23a(padapter), |
| ret == _SUCCESS?", acked":"", i, try_cnt, |
| jiffies_to_msecs(jiffies - start)); |
| } |
| exit: |
| return ret; |
| } |
| |
| void issue_action_spct_ch_switch23a(struct rtw_adapter *padapter, |
| u8 *ra, u8 new_ch, u8 ch_offset) |
| { |
| struct xmit_frame *pmgntframe; |
| struct pkt_attrib *pattrib; |
| unsigned char *pframe; |
| struct ieee80211_hdr *pwlanhdr; |
| unsigned short *fctrl; |
| struct xmit_priv *pxmitpriv = &padapter->xmitpriv; |
| struct mlme_ext_priv *pmlmeext = &padapter->mlmeextpriv; |
| u8 category, action; |
| |
| DBG_8723A(FUNC_NDEV_FMT" ra ="MAC_FMT", ch:%u, offset:%u\n", |
| FUNC_NDEV_ARG(padapter->pnetdev), MAC_ARG(ra), |
| new_ch, ch_offset); |
| |
| if ((pmgntframe = alloc_mgtxmitframe23a(pxmitpriv)) == NULL) |
| return; |
| |
| /* update attribute */ |
| pattrib = &pmgntframe->attrib; |
| update_mgntframe_attrib23a(padapter, pattrib); |
| |
| memset(pmgntframe->buf_addr, 0, WLANHDR_OFFSET + TXDESC_OFFSET); |
| |
| pframe = (u8 *)(pmgntframe->buf_addr) + TXDESC_OFFSET; |
| pwlanhdr = (struct ieee80211_hdr *)pframe; |
| |
| fctrl = &pwlanhdr->frame_control; |
| *fctrl = 0; |
| |
| ether_addr_copy(pwlanhdr->addr1, ra); /* RA */ |
| ether_addr_copy(pwlanhdr->addr2, myid(&padapter->eeprompriv)); /* TA */ |
| ether_addr_copy(pwlanhdr->addr3, ra); /* DA = RA */ |
| |
| SetSeqNum(pwlanhdr, pmlmeext->mgnt_seq); |
| pmlmeext->mgnt_seq++; |
| SetFrameSubType(pframe, WIFI_ACTION); |
| |
| pframe += sizeof(struct ieee80211_hdr_3addr); |
| pattrib->pktlen = sizeof(struct ieee80211_hdr_3addr); |
| |
| /* category, action */ |
| category = WLAN_CATEGORY_SPECTRUM_MGMT; |
| action = WLAN_ACTION_SPCT_CHL_SWITCH; |
| |
| pframe = rtw_set_fixed_ie23a(pframe, 1, &category, &pattrib->pktlen); |
| pframe = rtw_set_fixed_ie23a(pframe, 1, &action, &pattrib->pktlen); |
| |
| pframe = rtw_set_ie23a_ch_switch (pframe, &pattrib->pktlen, 0, |
| new_ch, 0); |
| pframe = rtw_set_ie23a_secondary_ch_offset(pframe, &pattrib->pktlen, |
| hal_ch_offset_to_secondary_ch_offset23a(ch_offset)); |
| |
| pattrib->last_txcmdsz = pattrib->pktlen; |
| |
| dump_mgntframe23a(padapter, pmgntframe); |
| } |
| |
| void issue_action_BA23a(struct rtw_adapter *padapter, unsigned char *raddr, |
| unsigned char action, unsigned short status) |
| { |
| u8 category = WLAN_CATEGORY_BACK; |
| u16 start_seq; |
| u16 BA_para_set; |
| u16 reason_code; |
| u16 BA_timeout_value; |
| u16 BA_starting_seqctrl; |
| int max_rx_ampdu_factor; |
| struct xmit_frame *pmgntframe; |
| struct pkt_attrib *pattrib; |
| u8 *pframe; |
| struct ieee80211_hdr *pwlanhdr; |
| u16 *fctrl; |
| struct xmit_priv *pxmitpriv = &padapter->xmitpriv; |
| struct mlme_ext_priv *pmlmeext = &padapter->mlmeextpriv; |
| struct mlme_ext_info *pmlmeinfo = &pmlmeext->mlmext_info; |
| struct sta_info *psta; |
| struct sta_priv *pstapriv = &padapter->stapriv; |
| struct registry_priv *pregpriv = &padapter->registrypriv; |
| #ifdef CONFIG_8723AU_BT_COEXIST |
| u8 tendaAPMac[] = {0xC8, 0x3A, 0x35}; |
| #endif |
| |
| DBG_8723A("%s, category =%d, action =%d, status =%d\n", |
| __func__, category, action, status); |
| |
| if ((pmgntframe = alloc_mgtxmitframe23a(pxmitpriv)) == NULL) |
| return; |
| |
| /* update attribute */ |
| pattrib = &pmgntframe->attrib; |
| update_mgntframe_attrib23a(padapter, pattrib); |
| |
| memset(pmgntframe->buf_addr, 0, WLANHDR_OFFSET + TXDESC_OFFSET); |
| |
| pframe = (u8 *)(pmgntframe->buf_addr) + TXDESC_OFFSET; |
| pwlanhdr = (struct ieee80211_hdr *)pframe; |
| |
| fctrl = &pwlanhdr->frame_control; |
| *fctrl = 0; |
| |
| /* memcpy(pwlanhdr->addr1, get_my_bssid23a(&pmlmeinfo->network), ETH_ALEN); */ |
| ether_addr_copy(pwlanhdr->addr1, raddr); |
| ether_addr_copy(pwlanhdr->addr2, myid(&padapter->eeprompriv)); |
| ether_addr_copy(pwlanhdr->addr3, get_my_bssid23a(&pmlmeinfo->network)); |
| |
| SetSeqNum(pwlanhdr, pmlmeext->mgnt_seq); |
| pmlmeext->mgnt_seq++; |
| SetFrameSubType(pframe, WIFI_ACTION); |
| |
| pframe += sizeof(struct ieee80211_hdr_3addr); |
| pattrib->pktlen = sizeof(struct ieee80211_hdr_3addr); |
| |
| pframe = rtw_set_fixed_ie23a(pframe, 1, &category, &pattrib->pktlen); |
| pframe = rtw_set_fixed_ie23a(pframe, 1, &action, &pattrib->pktlen); |
| |
| status = cpu_to_le16(status); |
| |
| if (category != 3) |
| goto out; |
| |
| switch (action) |
| { |
| case 0: /* ADDBA req */ |
| do { |
| pmlmeinfo->dialogToken++; |
| } while (pmlmeinfo->dialogToken == 0); |
| pframe = rtw_set_fixed_ie23a(pframe, 1, &pmlmeinfo->dialogToken, |
| &pattrib->pktlen); |
| |
| #ifdef CONFIG_8723AU_BT_COEXIST |
| if ((BT_1Ant(padapter) == true) && |
| ((pmlmeinfo->assoc_AP_vendor != broadcomAP) || |
| memcmp(raddr, tendaAPMac, 3))) { |
| /* A-MSDU NOT Supported */ |
| BA_para_set = 0; |
| /* immediate Block Ack */ |
| BA_para_set |= (1 << 1) & |
| IEEE80211_ADDBA_PARAM_POLICY_MASK; |
| /* TID */ |
| BA_para_set |= (status << 2) & |
| IEEE80211_ADDBA_PARAM_TID_MASK; |
| /* max buffer size is 8 MSDU */ |
| BA_para_set |= (8 << 6) & |
| IEEE80211_ADDBA_PARAM_BUF_SIZE_MASK; |
| } else |
| #endif |
| { |
| /* immediate ack & 64 buffer size */ |
| BA_para_set = (0x1002 | ((status & 0xf) << 2)); |
| } |
| BA_para_set = cpu_to_le16(BA_para_set); |
| pframe = rtw_set_fixed_ie23a(pframe, 2, |
| (unsigned char *)&BA_para_set, |
| &pattrib->pktlen); |
| |
| BA_timeout_value = 5000;/* 5ms */ |
| BA_timeout_value = cpu_to_le16(BA_timeout_value); |
| pframe = rtw_set_fixed_ie23a(pframe, 2, (unsigned char *) |
| &BA_timeout_value, |
| &pattrib->pktlen); |
| |
| /* if ((psta = rtw_get_stainfo23a(pstapriv, |
| pmlmeinfo->network.MacAddress)) != NULL) */ |
| if ((psta = rtw_get_stainfo23a(pstapriv, raddr))) { |
| start_seq = (psta->sta_xmitpriv.txseq_tid[status & 0x07]&0xfff) + 1; |
| |
| DBG_8723A("BA_starting_seqctrl = %d for TID =%d\n", |
| start_seq, status & 0x07); |
| |
| psta->BA_starting_seqctrl[status & 0x07] = start_seq; |
| |
| BA_starting_seqctrl = start_seq << 4; |
| } |
| |
| BA_starting_seqctrl = cpu_to_le16(BA_starting_seqctrl); |
| pframe = rtw_set_fixed_ie23a(pframe, 2, (unsigned char *)&BA_starting_seqctrl, &pattrib->pktlen); |
| break; |
| |
| case 1: /* ADDBA rsp */ |
| pframe = rtw_set_fixed_ie23a(pframe, 1, &pmlmeinfo->ADDBA_req.dialog_token, &pattrib->pktlen); |
| pframe = rtw_set_fixed_ie23a(pframe, 2, |
| (unsigned char *)&status, |
| &pattrib->pktlen); |
| rtw_hal_get_def_var23a(padapter, HW_VAR_MAX_RX_AMPDU_FACTOR, |
| &max_rx_ampdu_factor); |
| if (max_rx_ampdu_factor == IEEE80211_HT_MAX_AMPDU_64K) |
| BA_para_set = ((le16_to_cpu(pmlmeinfo->ADDBA_req.BA_para_set) & 0x3f) | 0x1000); /* 64 buffer size */ |
| else if (max_rx_ampdu_factor == IEEE80211_HT_MAX_AMPDU_32K) |
| BA_para_set = ((le16_to_cpu(pmlmeinfo->ADDBA_req.BA_para_set) & 0x3f) | 0x0800); /* 32 buffer size */ |
| else if (max_rx_ampdu_factor == IEEE80211_HT_MAX_AMPDU_16K) |
| BA_para_set = ((le16_to_cpu(pmlmeinfo->ADDBA_req.BA_para_set) & 0x3f) | 0x0400); /* 16 buffer size */ |
| else if (max_rx_ampdu_factor == IEEE80211_HT_MAX_AMPDU_8K) |
| BA_para_set = ((le16_to_cpu(pmlmeinfo->ADDBA_req.BA_para_set) & 0x3f) | 0x0200); /* 8 buffer size */ |
| else |
| BA_para_set = ((le16_to_cpu(pmlmeinfo->ADDBA_req.BA_para_set) & 0x3f) | 0x1000); /* 64 buffer size */ |
| |
| #ifdef CONFIG_8723AU_BT_COEXIST |
| if ((BT_1Ant(padapter) == true) && |
| ((pmlmeinfo->assoc_AP_vendor != broadcomAP) || |
| memcmp(raddr, tendaAPMac, 3))) { |
| /* max buffer size is 8 MSDU */ |
| BA_para_set &= ~IEEE80211_ADDBA_PARAM_BUF_SIZE_MASK; |
| BA_para_set |= (8 << 6) & |
| IEEE80211_ADDBA_PARAM_BUF_SIZE_MASK; |
| } |
| #endif |
| |
| if (pregpriv->ampdu_amsdu == 0)/* disabled */ |
| BA_para_set = cpu_to_le16(BA_para_set & ~BIT(0)); |
| else if (pregpriv->ampdu_amsdu == 1)/* enabled */ |
| BA_para_set = cpu_to_le16(BA_para_set | BIT(0)); |
| else /* auto */ |
| BA_para_set = cpu_to_le16(BA_para_set); |
| |
| pframe = rtw_set_fixed_ie23a(pframe, 2, |
| (unsigned char *)&BA_para_set, |
| &pattrib->pktlen); |
| pframe = rtw_set_fixed_ie23a(pframe, 2, (unsigned char *)&pmlmeinfo->ADDBA_req.BA_timeout_value, &pattrib->pktlen); |
| break; |
| case 2:/* DELBA */ |
| BA_para_set = (status & 0x1F) << 3; |
| BA_para_set = cpu_to_le16(BA_para_set); |
| pframe = rtw_set_fixed_ie23a(pframe, 2, |
| (unsigned char *)&BA_para_set, |
| &pattrib->pktlen); |
| |
| reason_code = 37;/* Requested from peer STA as it does not |
| want to use the mechanism */ |
| reason_code = cpu_to_le16(reason_code); |
| pframe = rtw_set_fixed_ie23a(pframe, 2, |
| (unsigned char *)&reason_code, |
| &pattrib->pktlen); |
| break; |
| default: |
| break; |
| } |
| |
| out: |
| pattrib->last_txcmdsz = pattrib->pktlen; |
| |
| dump_mgntframe23a(padapter, pmgntframe); |
| } |
| |
| static void issue_action_BSSCoexistPacket(struct rtw_adapter *padapter) |
| { |
| struct list_head *plist, *phead, *ptmp; |
| unsigned char category, action; |
| struct xmit_frame *pmgntframe; |
| struct pkt_attrib *pattrib; |
| unsigned char *pframe; |
| struct ieee80211_hdr *pwlanhdr; |
| unsigned short *fctrl; |
| struct wlan_network *pnetwork = NULL; |
| struct xmit_priv *pxmitpriv = &padapter->xmitpriv; |
| struct mlme_priv *pmlmepriv = &padapter->mlmepriv; |
| struct mlme_ext_priv *pmlmeext = &padapter->mlmeextpriv; |
| struct mlme_ext_info *pmlmeinfo = &pmlmeext->mlmext_info; |
| struct rtw_queue *queue = &pmlmepriv->scanned_queue; |
| u8 InfoContent[16] = {0}; |
| u8 ICS[8][15]; |
| |
| if ((pmlmepriv->num_FortyMHzIntolerant == 0) || (pmlmepriv->num_sta_no_ht == 0)) |
| return; |
| |
| if (true == pmlmeinfo->bwmode_updated) |
| return; |
| |
| DBG_8723A("%s\n", __func__); |
| |
| category = WLAN_CATEGORY_PUBLIC; |
| action = ACT_PUBLIC_BSSCOEXIST; |
| |
| if ((pmgntframe = alloc_mgtxmitframe23a(pxmitpriv)) == NULL) |
| { |
| return; |
| } |
| |
| /* update attribute */ |
| pattrib = &pmgntframe->attrib; |
| update_mgntframe_attrib23a(padapter, pattrib); |
| |
| memset(pmgntframe->buf_addr, 0, WLANHDR_OFFSET + TXDESC_OFFSET); |
| |
| pframe = (u8 *)(pmgntframe->buf_addr) + TXDESC_OFFSET; |
| pwlanhdr = (struct ieee80211_hdr *)pframe; |
| |
| fctrl = &pwlanhdr->frame_control; |
| *fctrl = 0; |
| |
| ether_addr_copy(pwlanhdr->addr1, get_my_bssid23a(&pmlmeinfo->network)); |
| ether_addr_copy(pwlanhdr->addr2, myid(&padapter->eeprompriv)); |
| ether_addr_copy(pwlanhdr->addr3, get_my_bssid23a(&pmlmeinfo->network)); |
| |
| SetSeqNum(pwlanhdr, pmlmeext->mgnt_seq); |
| pmlmeext->mgnt_seq++; |
| SetFrameSubType(pframe, WIFI_ACTION); |
| |
| pframe += sizeof(struct ieee80211_hdr_3addr); |
| pattrib->pktlen = sizeof(struct ieee80211_hdr_3addr); |
| |
| pframe = rtw_set_fixed_ie23a(pframe, 1, &category, &pattrib->pktlen); |
| pframe = rtw_set_fixed_ie23a(pframe, 1, &action, &pattrib->pktlen); |
| |
| /* */ |
| if (pmlmepriv->num_FortyMHzIntolerant>0) |
| { |
| u8 iedata = 0; |
| |
| iedata |= BIT(2);/* 20 MHz BSS Width Request */ |
| |
| pframe = rtw_set_ie23a(pframe, EID_BSSCoexistence, 1, &iedata, &pattrib->pktlen); |
| |
| } |
| |
| /* */ |
| memset(ICS, 0, sizeof(ICS)); |
| if (pmlmepriv->num_sta_no_ht>0) |
| { |
| int i; |
| |
| spin_lock_bh(&pmlmepriv->scanned_queue.lock); |
| |
| phead = get_list_head(queue); |
| plist = phead->next; |
| |
| list_for_each_safe(plist, ptmp, phead) { |
| int len; |
| u8 *p; |
| struct wlan_bssid_ex *pbss_network; |
| |
| pnetwork = container_of(plist, struct wlan_network, |
| list); |
| |
| pbss_network = &pnetwork->network; |
| |
| p = rtw_get_ie23a(pbss_network->IEs + _FIXED_IE_LENGTH_, _HT_CAPABILITY_IE_, &len, pbss_network->IELength - _FIXED_IE_LENGTH_); |
| if ((p == NULL) || (len == 0))/* non-HT */ |
| { |
| if ((pbss_network->Configuration.DSConfig<= 0) || (pbss_network->Configuration.DSConfig>14)) |
| continue; |
| |
| ICS[0][pbss_network->Configuration.DSConfig]= 1; |
| |
| if (ICS[0][0] == 0) |
| ICS[0][0] = 1; |
| } |
| |
| } |
| |
| spin_unlock_bh(&pmlmepriv->scanned_queue.lock); |
| |
| for (i = 0;i<8;i++) |
| { |
| if (ICS[i][0] == 1) |
| { |
| int j, k = 0; |
| |
| InfoContent[k] = i; |
| /* SET_BSS_INTOLERANT_ELE_REG_CLASS(InfoContent, i); */ |
| k++; |
| |
| for (j = 1;j<= 14;j++) |
| { |
| if (ICS[i][j]== 1) |
| { |
| if (k<16) |
| { |
| InfoContent[k] = j; /* channel number */ |
| /* SET_BSS_INTOLERANT_ELE_CHANNEL(InfoContent+k, j); */ |
| k++; |
| } |
| } |
| } |
| |
| pframe = rtw_set_ie23a(pframe, EID_BSSIntolerantChlReport, k, InfoContent, &pattrib->pktlen); |
| |
| } |
| |
| } |
| |
| } |
| |
| pattrib->last_txcmdsz = pattrib->pktlen; |
| |
| dump_mgntframe23a(padapter, pmgntframe); |
| } |
| |
| unsigned int send_delba23a(struct rtw_adapter *padapter, u8 initiator, u8 *addr) |
| { |
| struct sta_priv *pstapriv = &padapter->stapriv; |
| struct sta_info *psta = NULL; |
| /* struct recv_reorder_ctrl *preorder_ctrl; */ |
| struct mlme_ext_priv *pmlmeext = &padapter->mlmeextpriv; |
| struct mlme_ext_info *pmlmeinfo = &pmlmeext->mlmext_info; |
| u16 tid; |
| |
| if ((pmlmeinfo->state&0x03) != WIFI_FW_AP_STATE) |
| if (!(pmlmeinfo->state & WIFI_FW_ASSOC_SUCCESS)) |
| return _SUCCESS; |
| |
| psta = rtw_get_stainfo23a(pstapriv, addr); |
| if (psta == NULL) |
| return _SUCCESS; |
| |
| if (initiator == 0) { /* recipient */ |
| for (tid = 0; tid < MAXTID; tid++) { |
| if (psta->recvreorder_ctrl[tid].enable == true) { |
| DBG_8723A("rx agg disable tid(%d)\n", tid); |
| issue_action_BA23a(padapter, addr, WLAN_ACTION_DELBA, (((tid <<1) |initiator)&0x1F)); |
| psta->recvreorder_ctrl[tid].enable = false; |
| psta->recvreorder_ctrl[tid].indicate_seq = 0xffff; |
| } |
| } |
| } else if (initiator == 1) { /* originator */ |
| for (tid = 0; tid < MAXTID; tid++) { |
| if (psta->htpriv.agg_enable_bitmap & BIT(tid)) { |
| DBG_8723A("tx agg disable tid(%d)\n", tid); |
| issue_action_BA23a(padapter, addr, WLAN_ACTION_DELBA, (((tid <<1) |initiator)&0x1F)); |
| psta->htpriv.agg_enable_bitmap &= ~BIT(tid); |
| psta->htpriv.candidate_tid_bitmap &= ~BIT(tid); |
| |
| } |
| } |
| } |
| return _SUCCESS; |
| } |
| |
| unsigned int send_beacon23a(struct rtw_adapter *padapter) |
| { |
| u8 bxmitok = false; |
| int issue = 0; |
| int poll = 0; |
| unsigned long start = jiffies; |
| unsigned int passing_time; |
| |
| rtw_hal_set_hwreg23a(padapter, HW_VAR_BCN_VALID, NULL); |
| do { |
| issue_beacon23a(padapter, 100); |
| issue++; |
| do { |
| yield(); |
| rtw23a_hal_get_hwreg(padapter, HW_VAR_BCN_VALID, (u8 *)(&bxmitok)); |
| poll++; |
| } while ((poll%10)!= 0 && false == bxmitok && |
| !padapter->bSurpriseRemoved && |
| !padapter->bDriverStopped); |
| |
| } while (!bxmitok && issue<100 && !padapter->bSurpriseRemoved && |
| !padapter->bDriverStopped); |
| |
| if (padapter->bSurpriseRemoved || padapter->bDriverStopped) |
| return _FAIL; |
| |
| passing_time = jiffies_to_msecs(jiffies - start); |
| |
| if (!bxmitok) { |
| DBG_8723A("%s fail! %u ms\n", __func__, passing_time); |
| return _FAIL; |
| } else { |
| |
| if (passing_time > 100 || issue > 3) |
| DBG_8723A("%s success, issue:%d, poll:%d, %u ms\n", |
| __func__, issue, poll, passing_time); |
| return _SUCCESS; |
| } |
| } |
| |
| /**************************************************************************** |
| |
| Following are some utitity fuctions for WiFi MLME |
| |
| *****************************************************************************/ |
| |
| bool IsLegal5GChannel(struct rtw_adapter *Adapter, u8 channel) |
| { |
| |
| int i = 0; |
| u8 Channel_5G[45] = {36, 38, 40, 42, 44, 46, 48, 50, 52, 54, 56, 58, |
| 60, 62, 64, 100, 102, 104, 106, 108, 110, 112, 114, 116, 118, 120, 122, |
| 124, 126, 128, 130, 132, 134, 136, 138, 140, 149, 151, 153, 155, 157, 159, |
| 161, 163, 165}; |
| for (i = 0; i < sizeof(Channel_5G); i++) |
| if (channel == Channel_5G[i]) |
| return true; |
| return false; |
| } |
| |
| void site_survey23a(struct rtw_adapter *padapter) |
| { |
| unsigned char survey_channel = 0, val8; |
| enum rt_scan_type ScanType = SCAN_PASSIVE; |
| struct mlme_ext_priv *pmlmeext = &padapter->mlmeextpriv; |
| struct mlme_ext_info *pmlmeinfo = &pmlmeext->mlmext_info; |
| u32 initialgain = 0; |
| #ifdef CONFIG_8723AU_P2P |
| struct wifidirect_info *pwdinfo = &padapter->wdinfo; |
| |
| if ((pwdinfo->rx_invitereq_info.scan_op_ch_only) || |
| (pwdinfo->p2p_info.scan_op_ch_only)) { |
| if (pwdinfo->rx_invitereq_info.scan_op_ch_only) |
| survey_channel = pwdinfo->rx_invitereq_info.operation_ch[pmlmeext->sitesurvey_res.channel_idx]; |
| else |
| survey_channel = pwdinfo->p2p_info.operation_ch[pmlmeext->sitesurvey_res.channel_idx]; |
| ScanType = SCAN_ACTIVE; |
| } else if (rtw_p2p_findphase_ex_is_social(pwdinfo)) { |
| /* The driver is in the find phase, it should go through the social channel. */ |
| int ch_set_idx; |
| survey_channel = pwdinfo->social_chan[pmlmeext->sitesurvey_res.channel_idx]; |
| ch_set_idx = rtw_ch_set_search_ch23a(pmlmeext->channel_set, survey_channel); |
| if (ch_set_idx >= 0) |
| ScanType = pmlmeext->channel_set[ch_set_idx].ScanType; |
| else |
| ScanType = SCAN_ACTIVE; |
| } else |
| #endif /* CONFIG_8723AU_P2P */ |
| { |
| struct rtw_ieee80211_channel *ch; |
| if (pmlmeext->sitesurvey_res.channel_idx < pmlmeext->sitesurvey_res.ch_num) { |
| ch = &pmlmeext->sitesurvey_res.ch[pmlmeext->sitesurvey_res.channel_idx]; |
| survey_channel = ch->hw_value; |
| ScanType = (ch->flags & IEEE80211_CHAN_NO_IR) ? SCAN_PASSIVE : SCAN_ACTIVE; |
| } |
| } |
| |
| if (survey_channel != 0) { |
| /* PAUSE 4-AC Queue when site_survey23a */ |
| /* rtw23a_hal_get_hwreg(padapter, HW_VAR_TXPAUSE, (u8 *)(&val8)); */ |
| /* val8 |= 0x0f; */ |
| /* rtw_hal_set_hwreg23a(padapter, HW_VAR_TXPAUSE, (u8 *)(&val8)); */ |
| if (pmlmeext->sitesurvey_res.channel_idx == 0) |
| set_channel_bwmode23a(padapter, survey_channel, |
| HAL_PRIME_CHNL_OFFSET_DONT_CARE, |
| HT_CHANNEL_WIDTH_20); |
| else |
| SelectChannel23a(padapter, survey_channel); |
| |
| if (ScanType == SCAN_ACTIVE) /* obey the channel plan setting... */ |
| { |
| #ifdef CONFIG_8723AU_P2P |
| if (rtw_p2p_chk_state(pwdinfo, P2P_STATE_SCAN) || |
| rtw_p2p_chk_state(pwdinfo, P2P_STATE_FIND_PHASE_SEARCH) |
| ) |
| { |
| issue23a_probereq_p2p(padapter, NULL); |
| issue23a_probereq_p2p(padapter, NULL); |
| issue23a_probereq_p2p(padapter, NULL); |
| } |
| else |
| #endif /* CONFIG_8723AU_P2P */ |
| { |
| int i; |
| for (i = 0;i<RTW_SSID_SCAN_AMOUNT;i++) { |
| if (pmlmeext->sitesurvey_res.ssid[i].ssid_len) { |
| /* todo: to issue two probe req??? */ |
| issue_probereq23a(padapter, &pmlmeext->sitesurvey_res.ssid[i], NULL); |
| /* msleep(SURVEY_TO>>1); */ |
| issue_probereq23a(padapter, &pmlmeext->sitesurvey_res.ssid[i], NULL); |
| } |
| } |
| |
| if (pmlmeext->sitesurvey_res.scan_mode == SCAN_ACTIVE) { |
| /* todo: to issue two probe req??? */ |
| issue_probereq23a(padapter, NULL, NULL); |
| /* msleep(SURVEY_TO>>1); */ |
| issue_probereq23a(padapter, NULL, NULL); |
| } |
| } |
| } |
| |
| set_survey_timer(pmlmeext, pmlmeext->chan_scan_time); |
| } else { |
| |
| /* channel number is 0 or this channel is not valid. */ |
| |
| |
| #ifdef CONFIG_8723AU_P2P |
| if (rtw_p2p_chk_state(pwdinfo, P2P_STATE_SCAN) || rtw_p2p_chk_state(pwdinfo, P2P_STATE_FIND_PHASE_SEARCH)) |
| { |
| if ((pwdinfo->rx_invitereq_info.scan_op_ch_only) || (pwdinfo->p2p_info.scan_op_ch_only)) |
| { |
| /* Set the find_phase_state_exchange_cnt to P2P_FINDPHASE_EX_CNT. */ |
| /* This will let the following flow to run the scanning end. */ |
| rtw_p2p_findphase_ex_set(pwdinfo, P2P_FINDPHASE_EX_MAX); |
| } |
| } |
| |
| if (rtw_p2p_findphase_ex_is_needed(pwdinfo)) |
| { |
| /* Set the P2P State to the listen state of find phase and set the current channel to the listen channel */ |
| set_channel_bwmode23a(padapter, pwdinfo->listen_channel, HAL_PRIME_CHNL_OFFSET_DONT_CARE, HT_CHANNEL_WIDTH_20); |
| rtw_p2p_set_state(pwdinfo, P2P_STATE_FIND_PHASE_LISTEN); |
| pmlmeext->sitesurvey_res.state = SCAN_DISABLE; |
| |
| initialgain = 0xff; /* restore RX GAIN */ |
| rtw_hal_set_hwreg23a(padapter, HW_VAR_INITIAL_GAIN, (u8 *)(&initialgain)); |
| /* turn on dynamic functions */ |
| Restore_DM_Func_Flag23a(padapter); |
| /* Switch_DM_Func23a(padapter, DYNAMIC_FUNC_DIG|DYNAMIC_FUNC_HP|DYNAMIC_FUNC_SS, true); */ |
| |
| mod_timer(&pwdinfo->find_phase_timer, jiffies + |
| msecs_to_jiffies(pwdinfo->listen_dwell * 100)); |
| } else |
| #endif /* CONFIG_8723AU_P2P */ |
| { |
| #ifdef CONFIG_8723AU_P2P |
| if (rtw_p2p_chk_state(pwdinfo, P2P_STATE_SCAN) || rtw_p2p_chk_state(pwdinfo, P2P_STATE_FIND_PHASE_SEARCH)) |
| rtw_p2p_set_state(pwdinfo, rtw_p2p_pre_state(pwdinfo)); |
| rtw_p2p_findphase_ex_set(pwdinfo, P2P_FINDPHASE_EX_NONE); |
| #endif /* CONFIG_8723AU_P2P */ |
| |
| pmlmeext->sitesurvey_res.state = SCAN_COMPLETE; |
| |
| /* switch back to the original channel */ |
| |
| set_channel_bwmode23a(padapter, pmlmeext->cur_channel, pmlmeext->cur_ch_offset, pmlmeext->cur_bwmode); |
| |
| /* flush 4-AC Queue after site_survey23a */ |
| /* val8 = 0; */ |
| /* rtw_hal_set_hwreg23a(padapter, HW_VAR_TXPAUSE, (u8 *)(&val8)); */ |
| |
| /* config MSR */ |
| Set_MSR23a(padapter, (pmlmeinfo->state & 0x3)); |
| |
| initialgain = 0xff; /* restore RX GAIN */ |
| rtw_hal_set_hwreg23a(padapter, HW_VAR_INITIAL_GAIN, (u8 *)(&initialgain)); |
| /* turn on dynamic functions */ |
| Restore_DM_Func_Flag23a(padapter); |
| /* Switch_DM_Func23a(padapter, DYNAMIC_ALL_FUNC_ENABLE, true); */ |
| |
| if (is_client_associated_to_ap23a(padapter) == true) |
| { |
| issue_nulldata23a(padapter, NULL, 0, 3, 500); |
| |
| } |
| |
| val8 = 0; /* survey done */ |
| rtw_hal_set_hwreg23a(padapter, HW_VAR_MLME_SITESURVEY, (u8 *)(&val8)); |
| |
| report_surveydone_event23a(padapter); |
| |
| pmlmeext->chan_scan_time = SURVEY_TO; |
| pmlmeext->sitesurvey_res.state = SCAN_DISABLE; |
| |
| issue_action_BSSCoexistPacket(padapter); |
| issue_action_BSSCoexistPacket(padapter); |
| issue_action_BSSCoexistPacket(padapter); |
| |
| } |
| } |
| |
| return; |
| } |
| |
| /* collect bss info from Beacon and Probe request/response frames. */ |
| u8 collect_bss_info23a(struct rtw_adapter *padapter, struct recv_frame *precv_frame, struct wlan_bssid_ex *bssid) |
| { |
| int i; |
| u32 len; |
| u8 *p; |
| u16 val16; |
| struct sk_buff *skb = precv_frame->pkt; |
| struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data; |
| u8 *pframe = skb->data; |
| u32 packet_len = skb->len; |
| u8 ie_offset; |
| struct registry_priv *pregistrypriv = &padapter->registrypriv; |
| struct mlme_ext_priv *pmlmeext = &padapter->mlmeextpriv; |
| struct mlme_ext_info *pmlmeinfo = &pmlmeext->mlmext_info; |
| |
| len = packet_len - sizeof(struct ieee80211_hdr_3addr); |
| |
| if (len > MAX_IE_SZ) |
| { |
| /* DBG_8723A("IE too long for survey event\n"); */ |
| return _FAIL; |
| } |
| |
| memset(bssid, 0, sizeof(struct wlan_bssid_ex)); |
| |
| if (ieee80211_is_beacon(hdr->frame_control)) { |
| bssid->reserved = 1; |
| ie_offset = _BEACON_IE_OFFSET_; |
| } else { |
| /* FIXME : more type */ |
| if (ieee80211_is_probe_req(hdr->frame_control)) { |
| ie_offset = _PROBEREQ_IE_OFFSET_; |
| bssid->reserved = 2; |
| } else if (ieee80211_is_probe_resp(hdr->frame_control)) { |
| ie_offset = _PROBERSP_IE_OFFSET_; |
| bssid->reserved = 3; |
| } else { |
| bssid->reserved = 0; |
| ie_offset = _FIXED_IE_LENGTH_; |
| } |
| } |
| |
| bssid->Length = sizeof(struct wlan_bssid_ex) - MAX_IE_SZ + len; |
| |
| /* below is to copy the information element */ |
| bssid->IELength = len; |
| memcpy(bssid->IEs, (pframe + sizeof(struct ieee80211_hdr_3addr)), bssid->IELength); |
| |
| /* get the signal strength */ |
| bssid->Rssi = precv_frame->attrib.phy_info.RecvSignalPower; /* in dBM.raw data */ |
| bssid->PhyInfo.SignalQuality = precv_frame->attrib.phy_info.SignalQuality;/* in percentage */ |
| bssid->PhyInfo.SignalStrength = precv_frame->attrib.phy_info.SignalStrength;/* in percentage */ |
| |
| /* checking SSID */ |
| if ((p = rtw_get_ie23a(bssid->IEs + ie_offset, _SSID_IE_, &len, bssid->IELength - ie_offset)) == NULL) |
| { |
| DBG_8723A("marc: cannot find SSID for survey event\n"); |
| return _FAIL; |
| } |
| |
| if (*(p + 1)) { |
| if (len > IEEE80211_MAX_SSID_LEN) { |
| DBG_8723A("%s()-%d: IE too long (%d) for survey " |
| "event\n", __func__, __LINE__, len); |
| return _FAIL; |
| } |
| memcpy(bssid->Ssid.ssid, (p + 2), *(p + 1)); |
| bssid->Ssid.ssid_len = *(p + 1); |
| } else { |
| bssid->Ssid.ssid_len = 0; |
| } |
| |
| memset(bssid->SupportedRates, 0, NDIS_802_11_LENGTH_RATES_EX); |
| |
| /* checking rate info... */ |
| i = 0; |
| p = rtw_get_ie23a(bssid->IEs + ie_offset, _SUPPORTEDRATES_IE_, &len, bssid->IELength - ie_offset); |
| if (p != NULL) |
| { |
| if (len > NDIS_802_11_LENGTH_RATES_EX) |
| { |
| DBG_8723A("%s()-%d: IE too long (%d) for survey event\n", __func__, __LINE__, len); |
| return _FAIL; |
| } |
| memcpy(bssid->SupportedRates, (p + 2), len); |
| i = len; |
| } |
| |
| p = rtw_get_ie23a(bssid->IEs + ie_offset, _EXT_SUPPORTEDRATES_IE_, &len, bssid->IELength - ie_offset); |
| if (p != NULL) |
| { |
| if (len > (NDIS_802_11_LENGTH_RATES_EX-i)) |
| { |
| DBG_8723A("%s()-%d: IE too long (%d) for survey event\n", __func__, __LINE__, len); |
| return _FAIL; |
| } |
| memcpy(bssid->SupportedRates + i, (p + 2), len); |
| } |
| |
| /* todo: */ |
| { |
| bssid->NetworkTypeInUse = Ndis802_11OFDM24; |
| } |
| |
| if (bssid->IELength < 12) |
| return _FAIL; |
| |
| /* Checking for DSConfig */ |
| p = rtw_get_ie23a(bssid->IEs + ie_offset, _DSSET_IE_, &len, bssid->IELength - ie_offset); |
| |
| bssid->Configuration.DSConfig = 0; |
| bssid->Configuration.Length = 0; |
| |
| if (p) |
| { |
| bssid->Configuration.DSConfig = *(p + 2); |
| } |
| else |
| {/* In 5G, some ap do not have DSSET IE */ |
| /* checking HT info for channel */ |
| p = rtw_get_ie23a(bssid->IEs + ie_offset, _HT_ADD_INFO_IE_, &len, bssid->IELength - ie_offset); |
| if (p) |
| { |
| struct HT_info_element *HT_info = (struct HT_info_element *)(p + 2); |
| bssid->Configuration.DSConfig = HT_info->primary_channel; |
| } |
| else |
| { /* use current channel */ |
| bssid->Configuration.DSConfig = rtw_get_oper_ch23a(padapter); |
| } |
| } |
| |
| if (ieee80211_is_probe_req(hdr->frame_control)) { |
| /* FIXME */ |
| bssid->InfrastructureMode = Ndis802_11Infrastructure; |
| ether_addr_copy(bssid->MacAddress, hdr->addr2); |
| bssid->Privacy = 1; |
| return _SUCCESS; |
| } |
| |
| memcpy(&bssid->Configuration.BeaconPeriod, rtw_get_beacon_interval23a_from_ie(bssid->IEs), 2); |
| bssid->Configuration.BeaconPeriod = le32_to_cpu(bssid->Configuration.BeaconPeriod); |
| |
| val16 = rtw_get_capability23a(bssid); |
| |
| if (val16 & BIT(0)) { |
| bssid->InfrastructureMode = Ndis802_11Infrastructure; |
| ether_addr_copy(bssid->MacAddress, hdr->addr2); |
| } else { |
| bssid->InfrastructureMode = Ndis802_11IBSS; |
| ether_addr_copy(bssid->MacAddress, hdr->addr3); |
| } |
| |
| if (val16 & BIT(4)) |
| bssid->Privacy = 1; |
| else |
| bssid->Privacy = 0; |
| |
| bssid->Configuration.ATIMWindow = 0; |
| |
| /* 20/40 BSS Coexistence check */ |
| if ((pregistrypriv->wifi_spec == 1) && (false == pmlmeinfo->bwmode_updated)) |
| { |
| struct mlme_priv *pmlmepriv = &padapter->mlmepriv; |
| |
| p = rtw_get_ie23a(bssid->IEs + ie_offset, _HT_CAPABILITY_IE_, &len, bssid->IELength - ie_offset); |
| if (p && len > 0) { |
| struct HT_caps_element *pHT_caps; |
| pHT_caps = (struct HT_caps_element *)(p + 2); |
| |
| if (pHT_caps->u.HT_cap_element.HT_caps_info & BIT(14)) |
| pmlmepriv->num_FortyMHzIntolerant++; |
| } else |
| { |
| pmlmepriv->num_sta_no_ht++; |
| } |
| } |
| |
| |
| /* mark bss info receving from nearby channel as SignalQuality 101 */ |
| if (bssid->Configuration.DSConfig != rtw_get_oper_ch23a(padapter)) |
| bssid->PhyInfo.SignalQuality = 101; |
| |
| return _SUCCESS; |
| } |
| |
| void start_create_ibss23a(struct rtw_adapter* padapter) |
| { |
| unsigned short caps; |
| u8 val8; |
| u8 join_type; |
| struct mlme_ext_priv *pmlmeext = &padapter->mlmeextpriv; |
| struct mlme_ext_info *pmlmeinfo = &pmlmeext->mlmext_info; |
| struct wlan_bssid_ex *pnetwork = &pmlmeinfo->network; |
| pmlmeext->cur_channel = (u8)pnetwork->Configuration.DSConfig; |
| pmlmeinfo->bcn_interval = get_beacon_interval23a(pnetwork); |
| |
| /* update wireless mode */ |
| update_wireless_mode23a(padapter); |
| |
| /* udpate capability */ |
| caps = rtw_get_capability23a(pnetwork); |
| update_capinfo23a(padapter, caps); |
| if (caps&cap_IBSS)/* adhoc master */ |
| { |
| val8 = 0xcf; |
| rtw_hal_set_hwreg23a(padapter, HW_VAR_SEC_CFG, (u8 *)(&val8)); |
| |
| /* switch channel */ |
| /* SelectChannel23a(padapter, pmlmeext->cur_channel, HAL_PRIME_CHNL_OFFSET_DONT_CARE); */ |
| set_channel_bwmode23a(padapter, pmlmeext->cur_channel, HAL_PRIME_CHNL_OFFSET_DONT_CARE, HT_CHANNEL_WIDTH_20); |
| |
| beacon_timing_control23a(padapter); |
| |
| /* set msr to WIFI_FW_ADHOC_STATE */ |
| pmlmeinfo->state = WIFI_FW_ADHOC_STATE; |
| Set_MSR23a(padapter, (pmlmeinfo->state & 0x3)); |
| |
| /* issue beacon */ |
| if (send_beacon23a(padapter) == _FAIL) |
| { |
| RT_TRACE(_module_rtl871x_mlme_c_, _drv_err_, ("issuing beacon frame fail....\n")); |
| |
| report_join_res23a(padapter, -1); |
| pmlmeinfo->state = WIFI_FW_NULL_STATE; |
| } |
| else |
| { |
| rtw_hal_set_hwreg23a(padapter, HW_VAR_BSSID, padapter->registrypriv.dev_network.MacAddress); |
| join_type = 0; |
| rtw_hal_set_hwreg23a(padapter, HW_VAR_MLME_JOIN, (u8 *)(&join_type)); |
| |
| report_join_res23a(padapter, 1); |
| pmlmeinfo->state |= WIFI_FW_ASSOC_SUCCESS; |
| } |
| } |
| else |
| { |
| DBG_8723A("start_create_ibss23a, invalid cap:%x\n", caps); |
| return; |
| } |
| } |
| |
| void start_clnt_join23a(struct rtw_adapter* padapter) |
| { |
| unsigned short caps; |
| u8 val8; |
| struct mlme_ext_priv *pmlmeext = &padapter->mlmeextpriv; |
| struct mlme_ext_info *pmlmeinfo = &pmlmeext->mlmext_info; |
| struct wlan_bssid_ex *pnetwork = &pmlmeinfo->network; |
| int beacon_timeout; |
| |
| pmlmeext->cur_channel = (u8)pnetwork->Configuration.DSConfig; |
| pmlmeinfo->bcn_interval = get_beacon_interval23a(pnetwork); |
| |
| /* update wireless mode */ |
| update_wireless_mode23a(padapter); |
| |
| /* udpate capability */ |
| caps = rtw_get_capability23a(pnetwork); |
| update_capinfo23a(padapter, caps); |
| if (caps&cap_ESS) { |
| /* switch channel */ |
| set_channel_bwmode23a(padapter, pmlmeext->cur_channel, pmlmeext->cur_ch_offset, pmlmeext->cur_bwmode); |
| |
| Set_MSR23a(padapter, WIFI_FW_STATION_STATE); |
| |
| val8 = (pmlmeinfo->auth_algo == dot11AuthAlgrthm_8021X)? 0xcc: 0xcf; |
| |
| rtw_hal_set_hwreg23a(padapter, HW_VAR_SEC_CFG, (u8 *)(&val8)); |
| |
| /* switch channel */ |
| /* set_channel_bwmode23a(padapter, pmlmeext->cur_channel, pmlmeext->cur_ch_offset, pmlmeext->cur_bwmode); */ |
| |
| /* here wait for receiving the beacon to start auth */ |
| /* and enable a timer */ |
| beacon_timeout = decide_wait_for_beacon_timeout23a(pmlmeinfo->bcn_interval); |
| set_link_timer(pmlmeext, beacon_timeout); |
| mod_timer(&padapter->mlmepriv.assoc_timer, jiffies + |
| msecs_to_jiffies((REAUTH_TO * REAUTH_LIMIT) + (REASSOC_TO*REASSOC_LIMIT) + beacon_timeout)); |
| pmlmeinfo->state = WIFI_FW_AUTH_NULL | WIFI_FW_STATION_STATE; |
| } |
| else if (caps&cap_IBSS) /* adhoc client */ |
| { |
| Set_MSR23a(padapter, WIFI_FW_ADHOC_STATE); |
| |
| val8 = 0xcf; |
| rtw_hal_set_hwreg23a(padapter, HW_VAR_SEC_CFG, (u8 *)(&val8)); |
| |
| /* switch channel */ |
| set_channel_bwmode23a(padapter, pmlmeext->cur_channel, pmlmeext->cur_ch_offset, pmlmeext->cur_bwmode); |
| |
| beacon_timing_control23a(padapter); |
| |
| pmlmeinfo->state = WIFI_FW_ADHOC_STATE; |
| |
| report_join_res23a(padapter, 1); |
| } |
| else |
| { |
| /* DBG_8723A("marc: invalid cap:%x\n", caps); */ |
| return; |
| } |
| } |
| |
| void start_clnt_auth23a(struct rtw_adapter* padapter) |
| { |
| struct mlme_ext_priv *pmlmeext = &padapter->mlmeextpriv; |
| struct mlme_ext_info *pmlmeinfo = &pmlmeext->mlmext_info; |
| |
| del_timer_sync(&pmlmeext->link_timer); |
| |
| pmlmeinfo->state &= (~WIFI_FW_AUTH_NULL); |
| pmlmeinfo->state |= WIFI_FW_AUTH_STATE; |
| |
| pmlmeinfo->auth_seq = 1; |
| pmlmeinfo->reauth_count = 0; |
| pmlmeinfo->reassoc_count = 0; |
| pmlmeinfo->link_count = 0; |
| pmlmeext->retry = 0; |
| |
| /* Because of AP's not receiving deauth before */ |
| /* AP may: 1)not response auth or 2)deauth us after link is complete */ |
| /* issue deauth before issuing auth to deal with the situation */ |
| /* Commented by Albert 2012/07/21 */ |
| /* For the Win8 P2P connection, it will be hard to have a successful connection if this Wi-Fi doesn't connect to it. */ |
| issue_deauth23a(padapter, (&pmlmeinfo->network)->MacAddress, WLAN_REASON_DEAUTH_LEAVING); |
| |
| DBG_8723A_LEVEL(_drv_always_, "start auth\n"); |
| issue_auth23a(padapter, NULL, 0); |
| |
| set_link_timer(pmlmeext, REAUTH_TO); |
| } |
| |
| void start_clnt_assoc23a(struct rtw_adapter* padapter) |
| { |
| struct mlme_ext_priv *pmlmeext = &padapter->mlmeextpriv; |
| struct mlme_ext_info *pmlmeinfo = &pmlmeext->mlmext_info; |
| |
| del_timer_sync(&pmlmeext->link_timer); |
| |
| pmlmeinfo->state &= (~(WIFI_FW_AUTH_NULL | WIFI_FW_AUTH_STATE)); |
| pmlmeinfo->state |= (WIFI_FW_AUTH_SUCCESS | WIFI_FW_ASSOC_STATE); |
| |
| issue_assocreq23a(padapter); |
| |
| set_link_timer(pmlmeext, REASSOC_TO); |
| } |
| |
| unsigned int receive_disconnect23a(struct rtw_adapter *padapter, unsigned char *MacAddr, unsigned short reason) |
| { |
| struct mlme_ext_priv *pmlmeext = &padapter->mlmeextpriv; |
| struct mlme_ext_info *pmlmeinfo = &pmlmeext->mlmext_info; |
| |
| /* check A3 */ |
| if (!ether_addr_equal(MacAddr, get_my_bssid23a(&pmlmeinfo->network))) |
| return _SUCCESS; |
| |
| DBG_8723A("%s\n", __func__); |
| |
| if ((pmlmeinfo->state&0x03) == WIFI_FW_STATION_STATE) |
| { |
| if (pmlmeinfo->state & WIFI_FW_ASSOC_SUCCESS) |
| { |
| pmlmeinfo->state = WIFI_FW_NULL_STATE; |
| report_del_sta_event23a(padapter, MacAddr, reason); |
| |
| } |
| else if (pmlmeinfo->state & WIFI_FW_LINKING_STATE) |
| { |
| pmlmeinfo->state = WIFI_FW_NULL_STATE; |
| report_join_res23a(padapter, -2); |
| } |
| } |
| |
| return _SUCCESS; |
| } |
| |
| static void process_80211d(struct rtw_adapter *padapter, struct wlan_bssid_ex *bssid) |
| { |
| struct registry_priv *pregistrypriv; |
| struct mlme_ext_priv *pmlmeext; |
| struct rt_channel_info *chplan_new; |
| u8 channel; |
| u8 i; |
| |
| pregistrypriv = &padapter->registrypriv; |
| pmlmeext = &padapter->mlmeextpriv; |
| |
| /* Adjust channel plan by AP Country IE */ |
| if (pregistrypriv->enable80211d && |
| (!pmlmeext->update_channel_plan_by_ap_done)) |
| { |
| u8 *ie, *p; |
| u32 len; |
| struct rt_channel_plan chplan_ap; |
| struct rt_channel_info chplan_sta[MAX_CHANNEL_NUM]; |
| u8 country[4]; |
| u8 fcn; /* first channel number */ |
| u8 noc; /* number of channel */ |
| u8 j, k; |
| |
| ie = rtw_get_ie23a(bssid->IEs + _FIXED_IE_LENGTH_, _COUNTRY_IE_, &len, bssid->IELength - _FIXED_IE_LENGTH_); |
| if (!ie) return; |
| if (len < 6) return; |
| |
| ie += 2; |
| p = ie; |
| ie += len; |
| |
| memset(country, 0, 4); |
| memcpy(country, p, 3); |
| p += 3; |
| RT_TRACE(_module_rtl871x_mlme_c_, _drv_notice_, |
| ("%s: 802.11d country =%s\n", __func__, country)); |
| |
| i = 0; |
| while ((ie - p) >= 3) |
| { |
| fcn = *(p++); |
| noc = *(p++); |
| p++; |
| |
| for (j = 0; j < noc; j++) |
| { |
| if (fcn <= 14) channel = fcn + j; /* 2.4 GHz */ |
| else channel = fcn + j*4; /* 5 GHz */ |
| |
| chplan_ap.Channel[i++] = channel; |
| } |
| } |
| chplan_ap.Len = i; |
| |
| memcpy(chplan_sta, pmlmeext->channel_set, sizeof(chplan_sta)); |
| memset(pmlmeext->channel_set, 0, sizeof(pmlmeext->channel_set)); |
| chplan_new = pmlmeext->channel_set; |
| |
| i = j = k = 0; |
| if (pregistrypriv->wireless_mode & WIRELESS_11G) { |
| do { |
| if ((i == MAX_CHANNEL_NUM) || |
| (chplan_sta[i].ChannelNum == 0) || |
| (chplan_sta[i].ChannelNum > 14)) |
| break; |
| |
| if ((j == chplan_ap.Len) || (chplan_ap.Channel[j] > 14)) |
| break; |
| |
| if (chplan_sta[i].ChannelNum == chplan_ap.Channel[j]) { |
| chplan_new[k].ChannelNum = chplan_ap.Channel[j]; |
| chplan_new[k].ScanType = SCAN_ACTIVE; |
| i++; |
| j++; |
| k++; |
| } else if (chplan_sta[i].ChannelNum < chplan_ap.Channel[j]) { |
| chplan_new[k].ChannelNum = chplan_sta[i].ChannelNum; |
| chplan_new[k].ScanType = SCAN_PASSIVE; |
| i++; |
| k++; |
| } else if (chplan_sta[i].ChannelNum > chplan_ap.Channel[j]) { |
| chplan_new[k].ChannelNum = chplan_ap.Channel[j]; |
| chplan_new[k].ScanType = SCAN_ACTIVE; |
| j++; |
| k++; |
| } |
| } while (1); |
| |
| /* change AP not support channel to Passive scan */ |
| while ((i < MAX_CHANNEL_NUM) && |
| (chplan_sta[i].ChannelNum != 0) && |
| (chplan_sta[i].ChannelNum <= 14)) { |
| chplan_new[k].ChannelNum = chplan_sta[i].ChannelNum; |
| chplan_new[k].ScanType = SCAN_PASSIVE; |
| i++; |
| k++; |
| } |
| |
| /* add channel AP supported */ |
| while ((j < chplan_ap.Len) && (chplan_ap.Channel[j] <= 14)) { |
| chplan_new[k].ChannelNum = chplan_ap.Channel[j]; |
| chplan_new[k].ScanType = SCAN_ACTIVE; |
| j++; |
| k++; |
| } |
| } else { |
| /* keep original STA 2.4G channel plan */ |
| while ((i < MAX_CHANNEL_NUM) && |
| (chplan_sta[i].ChannelNum != 0) && |
| (chplan_sta[i].ChannelNum <= 14)) { |
| chplan_new[k].ChannelNum = chplan_sta[i].ChannelNum; |
| chplan_new[k].ScanType = chplan_sta[i].ScanType; |
| i++; |
| k++; |
| } |
| |
| /* skip AP 2.4G channel plan */ |
| while ((j < chplan_ap.Len) && (chplan_ap.Channel[j] <= 14)) { |
| j++; |
| } |
| } |
| |
| if (pregistrypriv->wireless_mode & WIRELESS_11A) { |
| do { |
| if ((i == MAX_CHANNEL_NUM) || |
| (chplan_sta[i].ChannelNum == 0)) |
| break; |
| |
| if ((j == chplan_ap.Len) || (chplan_ap.Channel[j] == 0)) |
| break; |
| |
| if (chplan_sta[i].ChannelNum == chplan_ap.Channel[j]) |
| { |
| chplan_new[k].ChannelNum = chplan_ap.Channel[j]; |
| chplan_new[k].ScanType = SCAN_ACTIVE; |
| i++; |
| j++; |
| k++; |
| } |
| else if (chplan_sta[i].ChannelNum < chplan_ap.Channel[j]) |
| { |
| chplan_new[k].ChannelNum = chplan_sta[i].ChannelNum; |
| /* chplan_new[k].ScanType = chplan_sta[i].ScanType; */ |
| chplan_new[k].ScanType = SCAN_PASSIVE; |
| i++; |
| k++; |
| } |
| else if (chplan_sta[i].ChannelNum > chplan_ap.Channel[j]) |
| { |
| chplan_new[k].ChannelNum = chplan_ap.Channel[j]; |
| chplan_new[k].ScanType = SCAN_ACTIVE; |
| j++; |
| k++; |
| } |
| } while (1); |
| |
| /* change AP not support channel to Passive scan */ |
| while ((i < MAX_CHANNEL_NUM) && (chplan_sta[i].ChannelNum != 0)) { |
| chplan_new[k].ChannelNum = chplan_sta[i].ChannelNum; |
| chplan_new[k].ScanType = SCAN_PASSIVE; |
| i++; |
| k++; |
| } |
| |
| /* add channel AP supported */ |
| while ((j < chplan_ap.Len) && (chplan_ap.Channel[j] != 0)) { |
| chplan_new[k].ChannelNum = chplan_ap.Channel[j]; |
| chplan_new[k].ScanType = SCAN_ACTIVE; |
| j++; |
| k++; |
| } |
| } else { |
| /* keep original STA 5G channel plan */ |
| while ((i < MAX_CHANNEL_NUM) && (chplan_sta[i].ChannelNum != 0)) { |
| chplan_new[k].ChannelNum = chplan_sta[i].ChannelNum; |
| chplan_new[k].ScanType = chplan_sta[i].ScanType; |
| i++; |
| k++; |
| } |
| } |
| pmlmeext->update_channel_plan_by_ap_done = 1; |
| } |
| |
| /* If channel is used by AP, set channel scan type to active */ |
| channel = bssid->Configuration.DSConfig; |
| chplan_new = pmlmeext->channel_set; |
| i = 0; |
| while ((i < MAX_CHANNEL_NUM) && (chplan_new[i].ChannelNum != 0)) { |
| if (chplan_new[i].ChannelNum == channel) |
| { |
| if (chplan_new[i].ScanType == SCAN_PASSIVE) { |
| /* 5G Bnad 2, 3 (DFS) doesn't change to active scan */ |
| if (channel >= 52 && channel <= 144) |
| break; |
| |
| chplan_new[i].ScanType = SCAN_ACTIVE; |
| RT_TRACE(_module_rtl871x_mlme_c_, _drv_notice_, |
| ("%s: change channel %d scan type from passive to active\n", |
| __func__, channel)); |
| } |
| break; |
| } |
| i++; |
| } |
| } |
| |
| /**************************************************************************** |
| |
| Following are the functions to report events |
| |
| *****************************************************************************/ |
| |
| void report_survey_event23a(struct rtw_adapter *padapter, struct recv_frame *precv_frame) |
| { |
| struct cmd_obj *pcmd_obj; |
| u8 *pevtcmd; |
| u32 cmdsz; |
| struct survey_event *psurvey_evt; |
| struct C2HEvent_Header *pc2h_evt_hdr; |
| struct mlme_ext_priv *pmlmeext; |
| struct cmd_priv *pcmdpriv; |
| |
| if (!padapter) |
| return; |
| |
| pmlmeext = &padapter->mlmeextpriv; |
| pcmdpriv = &padapter->cmdpriv; |
| |
| pcmd_obj = (struct cmd_obj *)kzalloc(sizeof(struct cmd_obj), |
| GFP_ATOMIC); |
| if (!pcmd_obj) |
| return; |
| |
| cmdsz = (sizeof(struct survey_event) + sizeof(struct C2HEvent_Header)); |
| pevtcmd = kzalloc(cmdsz, GFP_ATOMIC); |
| if (!pevtcmd) { |
| kfree(pcmd_obj); |
| return; |
| } |
| |
| INIT_LIST_HEAD(&pcmd_obj->list); |
| |
| pcmd_obj->cmdcode = GEN_CMD_CODE(_Set_MLME_EVT); |
| pcmd_obj->cmdsz = cmdsz; |
| pcmd_obj->parmbuf = pevtcmd; |
| |
| pcmd_obj->rsp = NULL; |
| pcmd_obj->rspsz = 0; |
| |
| pc2h_evt_hdr = (struct C2HEvent_Header*)(pevtcmd); |
| pc2h_evt_hdr->len = sizeof(struct survey_event); |
| pc2h_evt_hdr->ID = GEN_EVT_CODE(_Survey); |
| pc2h_evt_hdr->seq = atomic_inc_return(&pmlmeext->event_seq); |
| |
| psurvey_evt = (struct survey_event*)(pevtcmd + sizeof(struct C2HEvent_Header)); |
| |
| if (collect_bss_info23a(padapter, precv_frame, &psurvey_evt->bss) == _FAIL) { |
| kfree(pcmd_obj); |
| kfree(pevtcmd); |
| return; |
| } |
| |
| process_80211d(padapter, &psurvey_evt->bss); |
| |
| rtw_enqueue_cmd23a(pcmdpriv, pcmd_obj); |
| |
| pmlmeext->sitesurvey_res.bss_cnt++; |
| |
| return; |
| } |
| |
| void report_surveydone_event23a(struct rtw_adapter *padapter) |
| { |
| struct cmd_obj *pcmd_obj; |
| u8 *pevtcmd; |
| u32 cmdsz; |
| struct surveydone_event *psurveydone_evt; |
| struct C2HEvent_Header *pc2h_evt_hdr; |
| struct mlme_ext_priv *pmlmeext = &padapter->mlmeextpriv; |
| struct cmd_priv *pcmdpriv = &padapter->cmdpriv; |
| |
| pcmd_obj = (struct cmd_obj *)kzalloc(sizeof(struct cmd_obj), |
| GFP_ATOMIC); |
| if (!pcmd_obj) |
| return; |
| |
| cmdsz = (sizeof(struct surveydone_event) + sizeof(struct C2HEvent_Header)); |
| pevtcmd = kzalloc(cmdsz, GFP_ATOMIC); |
| if (!pevtcmd) { |
| kfree(pcmd_obj); |
| return; |
| } |
| |
| INIT_LIST_HEAD(&pcmd_obj->list); |
| |
| pcmd_obj->cmdcode = GEN_CMD_CODE(_Set_MLME_EVT); |
| pcmd_obj->cmdsz = cmdsz; |
| pcmd_obj->parmbuf = pevtcmd; |
| |
| pcmd_obj->rsp = NULL; |
| pcmd_obj->rspsz = 0; |
| |
| pc2h_evt_hdr = (struct C2HEvent_Header*)(pevtcmd); |
| pc2h_evt_hdr->len = sizeof(struct surveydone_event); |
| pc2h_evt_hdr->ID = GEN_EVT_CODE(_SurveyDone); |
| pc2h_evt_hdr->seq = atomic_inc_return(&pmlmeext->event_seq); |
| |
| psurveydone_evt = (struct surveydone_event*)(pevtcmd + sizeof(struct C2HEvent_Header)); |
| psurveydone_evt->bss_cnt = pmlmeext->sitesurvey_res.bss_cnt; |
| |
| DBG_8723A("survey done event(%x)\n", psurveydone_evt->bss_cnt); |
| |
| rtw_enqueue_cmd23a(pcmdpriv, pcmd_obj); |
| |
| return; |
| } |
| |
| void report_join_res23a(struct rtw_adapter *padapter, int res) |
| { |
| struct cmd_obj *pcmd_obj; |
| u8 *pevtcmd; |
| u32 cmdsz; |
| struct joinbss_event *pjoinbss_evt; |
| struct C2HEvent_Header *pc2h_evt_hdr; |
| struct mlme_ext_priv *pmlmeext = &padapter->mlmeextpriv; |
| struct mlme_ext_info *pmlmeinfo = &pmlmeext->mlmext_info; |
| struct cmd_priv *pcmdpriv = &padapter->cmdpriv; |
| |
| pcmd_obj = (struct cmd_obj *)kzalloc(sizeof(struct cmd_obj), |
| GFP_ATOMIC); |
| if (!pcmd_obj) |
| return; |
| |
| cmdsz = (sizeof(struct joinbss_event) + sizeof(struct C2HEvent_Header)); |
| pevtcmd = kzalloc(cmdsz, GFP_ATOMIC); |
| if (!pevtcmd) { |
| kfree(pcmd_obj); |
| return; |
| } |
| |
| INIT_LIST_HEAD(&pcmd_obj->list); |
| |
| pcmd_obj->cmdcode = GEN_CMD_CODE(_Set_MLME_EVT); |
| pcmd_obj->cmdsz = cmdsz; |
| pcmd_obj->parmbuf = pevtcmd; |
| |
| pcmd_obj->rsp = NULL; |
| pcmd_obj->rspsz = 0; |
| |
| pc2h_evt_hdr = (struct C2HEvent_Header*)(pevtcmd); |
| pc2h_evt_hdr->len = sizeof(struct joinbss_event); |
| pc2h_evt_hdr->ID = GEN_EVT_CODE(_JoinBss); |
| pc2h_evt_hdr->seq = atomic_inc_return(&pmlmeext->event_seq); |
| |
| pjoinbss_evt = (struct joinbss_event*)(pevtcmd + sizeof(struct C2HEvent_Header)); |
| memcpy((unsigned char *)&pjoinbss_evt->network.network, |
| &pmlmeinfo->network, sizeof(struct wlan_bssid_ex)); |
| pjoinbss_evt->network.join_res = pjoinbss_evt->network.aid = res; |
| |
| DBG_8723A("report_join_res23a(%d)\n", res); |
| |
| rtw_joinbss_event_prehandle23a(padapter, (u8 *)&pjoinbss_evt->network); |
| |
| rtw_enqueue_cmd23a(pcmdpriv, pcmd_obj); |
| |
| return; |
| } |
| |
| void report_del_sta_event23a(struct rtw_adapter *padapter, unsigned char* MacAddr, unsigned short reason) |
| { |
| struct cmd_obj *pcmd_obj; |
| u8 *pevtcmd; |
| u32 cmdsz; |
| struct sta_info *psta; |
| int mac_id; |
| struct stadel_event *pdel_sta_evt; |
| struct C2HEvent_Header *pc2h_evt_hdr; |
| struct mlme_ext_priv *pmlmeext = &padapter->mlmeextpriv; |
| struct cmd_priv *pcmdpriv = &padapter->cmdpriv; |
| |
| pcmd_obj = (struct cmd_obj *)kzalloc(sizeof(struct cmd_obj), |
| GFP_ATOMIC); |
| if (!pcmd_obj) |
| return; |
| |
| cmdsz = (sizeof(struct stadel_event) + sizeof(struct C2HEvent_Header)); |
| pevtcmd = kzalloc(cmdsz, GFP_ATOMIC); |
| if (!pevtcmd) { |
| kfree(pcmd_obj); |
| return; |
| } |
| |
| INIT_LIST_HEAD(&pcmd_obj->list); |
| |
| pcmd_obj->cmdcode = GEN_CMD_CODE(_Set_MLME_EVT); |
| pcmd_obj->cmdsz = cmdsz; |
| pcmd_obj->parmbuf = pevtcmd; |
| |
| pcmd_obj->rsp = NULL; |
| pcmd_obj->rspsz = 0; |
| |
| pc2h_evt_hdr = (struct C2HEvent_Header*)(pevtcmd); |
| pc2h_evt_hdr->len = sizeof(struct stadel_event); |
| pc2h_evt_hdr->ID = GEN_EVT_CODE(_DelSTA); |
| pc2h_evt_hdr->seq = atomic_inc_return(&pmlmeext->event_seq); |
| |
| pdel_sta_evt = (struct stadel_event*)(pevtcmd + sizeof(struct C2HEvent_Header)); |
| ether_addr_copy((unsigned char *)&pdel_sta_evt->macaddr, MacAddr); |
| memcpy((unsigned char *)pdel_sta_evt->rsvd, (unsigned char *)&reason, |
| 2); |
| |
| psta = rtw_get_stainfo23a(&padapter->stapriv, MacAddr); |
| if (psta) |
| mac_id = (int)psta->mac_id; |
| else |
| mac_id = (-1); |
| |
| pdel_sta_evt->mac_id = mac_id; |
| |
| DBG_8723A("report_del_sta_event23a: delete STA, mac_id =%d\n", mac_id); |
| |
| rtw_enqueue_cmd23a(pcmdpriv, pcmd_obj); |
| |
| return; |
| } |
| |
| void report_add_sta_event23a(struct rtw_adapter *padapter, unsigned char* MacAddr, int cam_idx) |
| { |
| struct cmd_obj *pcmd_obj; |
| u8 *pevtcmd; |
| u32 cmdsz; |
| struct stassoc_event *padd_sta_evt; |
| struct C2HEvent_Header *pc2h_evt_hdr; |
| struct mlme_ext_priv *pmlmeext = &padapter->mlmeextpriv; |
| struct cmd_priv *pcmdpriv = &padapter->cmdpriv; |
| |
| pcmd_obj = (struct cmd_obj *)kzalloc(sizeof(struct cmd_obj), |
| GFP_ATOMIC); |
| if (!pcmd_obj) |
| return; |
| |
| cmdsz = (sizeof(struct stassoc_event) + sizeof(struct C2HEvent_Header)); |
| pevtcmd = kzalloc(cmdsz, GFP_ATOMIC); |
| if (!pevtcmd) { |
| kfree(pcmd_obj); |
| return; |
| } |
| |
| INIT_LIST_HEAD(&pcmd_obj->list); |
| |
| pcmd_obj->cmdcode = GEN_CMD_CODE(_Set_MLME_EVT); |
| pcmd_obj->cmdsz = cmdsz; |
| pcmd_obj->parmbuf = pevtcmd; |
| |
| pcmd_obj->rsp = NULL; |
| pcmd_obj->rspsz = 0; |
| |
| pc2h_evt_hdr = (struct C2HEvent_Header*)(pevtcmd); |
| pc2h_evt_hdr->len = sizeof(struct stassoc_event); |
| pc2h_evt_hdr->ID = GEN_EVT_CODE(_AddSTA); |
| pc2h_evt_hdr->seq = atomic_inc_return(&pmlmeext->event_seq); |
| |
| padd_sta_evt = (struct stassoc_event*)(pevtcmd + sizeof(struct C2HEvent_Header)); |
| ether_addr_copy((unsigned char *)&padd_sta_evt->macaddr, MacAddr); |
| padd_sta_evt->cam_id = cam_idx; |
| |
| DBG_8723A("report_add_sta_event23a: add STA\n"); |
| |
| rtw_enqueue_cmd23a(pcmdpriv, pcmd_obj); |
| |
| return; |
| } |
| |
| /**************************************************************************** |
| |
| Following are the event callback functions |
| |
| *****************************************************************************/ |
| |
| /* for sta/adhoc mode */ |
| void update_sta_info23a(struct rtw_adapter *padapter, struct sta_info *psta) |
| { |
| struct mlme_priv *pmlmepriv = &padapter->mlmepriv; |
| struct mlme_ext_priv *pmlmeext = &padapter->mlmeextpriv; |
| struct mlme_ext_info *pmlmeinfo = &pmlmeext->mlmext_info; |
| |
| /* ERP */ |
| VCS_update23a(padapter, psta); |
| |
| /* HT */ |
| if (pmlmepriv->htpriv.ht_option) |
| { |
| psta->htpriv.ht_option = true; |
| |
| psta->htpriv.ampdu_enable = pmlmepriv->htpriv.ampdu_enable; |
| |
| if (support_short_GI23a(padapter, &pmlmeinfo->HT_caps)) |
| psta->htpriv.sgi = true; |
| |
| psta->qos_option = true; |
| |
| } |
| else |
| { |
| psta->htpriv.ht_option = false; |
| |
| psta->htpriv.ampdu_enable = false; |
| |
| psta->htpriv.sgi = false; |
| psta->qos_option = false; |
| |
| } |
| psta->htpriv.bwmode = pmlmeext->cur_bwmode; |
| psta->htpriv.ch_offset = pmlmeext->cur_ch_offset; |
| |
| psta->htpriv.agg_enable_bitmap = 0x0;/* reset */ |
| psta->htpriv.candidate_tid_bitmap = 0x0;/* reset */ |
| |
| /* QoS */ |
| if (pmlmepriv->qospriv.qos_option) |
| psta->qos_option = true; |
| |
| psta->state = _FW_LINKED; |
| } |
| |
| void mlmeext_joinbss_event_callback23a(struct rtw_adapter *padapter, int join_res) |
| { |
| struct sta_info *psta, *psta_bmc; |
| struct mlme_ext_priv *pmlmeext = &padapter->mlmeextpriv; |
| struct mlme_ext_info *pmlmeinfo = &pmlmeext->mlmext_info; |
| struct wlan_bssid_ex *cur_network = &pmlmeinfo->network; |
| struct sta_priv *pstapriv = &padapter->stapriv; |
| u8 join_type; |
| u16 media_status; |
| |
| if (join_res < 0) |
| { |
| join_type = 1; |
| rtw_hal_set_hwreg23a(padapter, HW_VAR_MLME_JOIN, (u8 *)(&join_type)); |
| rtw_hal_set_hwreg23a(padapter, HW_VAR_BSSID, null_addr); |
| |
| /* restore to initial setting. */ |
| update_tx_basic_rate23a(padapter, padapter->registrypriv.wireless_mode); |
| |
| goto exit_mlmeext_joinbss_event_callback23a; |
| } |
| |
| if ((pmlmeinfo->state&0x03) == WIFI_FW_ADHOC_STATE) |
| { |
| /* for bc/mc */ |
| psta_bmc = rtw_get_bcmc_stainfo23a(padapter); |
| if (psta_bmc) |
| { |
| pmlmeinfo->FW_sta_info[psta_bmc->mac_id].psta = psta_bmc; |
| update_bmc_sta_support_rate23a(padapter, psta_bmc->mac_id); |
| Update_RA_Entry23a(padapter, psta_bmc); |
| } |
| } |
| |
| /* turn on dynamic functions */ |
| Switch_DM_Func23a(padapter, DYNAMIC_ALL_FUNC_ENABLE, true); |
| |
| /* update IOT-releated issue */ |
| update_IOT_info23a(padapter); |
| |
| rtw_hal_set_hwreg23a(padapter, HW_VAR_BASIC_RATE, cur_network->SupportedRates); |
| |
| /* BCN interval */ |
| rtw_hal_set_hwreg23a(padapter, HW_VAR_BEACON_INTERVAL, (u8 *)(&pmlmeinfo->bcn_interval)); |
| |
| /* udpate capability */ |
| update_capinfo23a(padapter, pmlmeinfo->capability); |
| |
| /* WMM, Update EDCA param */ |
| WMMOnAssocRsp23a(padapter); |
| |
| /* HT */ |
| HTOnAssocRsp23a(padapter); |
| |
| /* Set cur_channel&cur_bwmode&cur_ch_offset */ |
| set_channel_bwmode23a(padapter, pmlmeext->cur_channel, pmlmeext->cur_ch_offset, pmlmeext->cur_bwmode); |
| |
| psta = rtw_get_stainfo23a(pstapriv, cur_network->MacAddress); |
| if (psta) /* only for infra. mode */ |
| { |
| pmlmeinfo->FW_sta_info[psta->mac_id].psta = psta; |
| |
| /* DBG_8723A("set_sta_rate23a\n"); */ |
| |
| psta->wireless_mode = pmlmeext->cur_wireless_mode; |
| |
| /* set per sta rate after updating HT cap. */ |
| set_sta_rate23a(padapter, psta); |
| |
| media_status = (psta->mac_id<<8)|1; /* MACID|OPMODE: 1 means connect */ |
| rtw_hal_set_hwreg23a(padapter, HW_VAR_H2C_MEDIA_STATUS_RPT, (u8 *)&media_status); |
| } |
| |
| join_type = 2; |
| rtw_hal_set_hwreg23a(padapter, HW_VAR_MLME_JOIN, (u8 *)(&join_type)); |
| |
| if ((pmlmeinfo->state&0x03) == WIFI_FW_STATION_STATE) |
| { |
| /* correcting TSF */ |
| correct_TSF23a(padapter, pmlmeext); |
| |
| /* set_link_timer(pmlmeext, DISCONNECT_TO); */ |
| } |
| |
| rtw_lps_ctrl_wk_cmd23a(padapter, LPS_CTRL_CONNECT, 0); |
| |
| exit_mlmeext_joinbss_event_callback23a: |
| DBG_8723A("=>%s\n", __func__); |
| } |
| |
| void mlmeext_sta_add_event_callback23a(struct rtw_adapter *padapter, struct sta_info *psta) |
| { |
| struct mlme_ext_priv *pmlmeext = &padapter->mlmeextpriv; |
| struct mlme_ext_info *pmlmeinfo = &pmlmeext->mlmext_info; |
| u8 join_type; |
| |
| DBG_8723A("%s\n", __func__); |
| |
| if ((pmlmeinfo->state&0x03) == WIFI_FW_ADHOC_STATE) |
| { |
| if (pmlmeinfo->state & WIFI_FW_ASSOC_SUCCESS)/* adhoc master or sta_count>1 */ |
| { |
| /* nothing to do */ |
| } |
| else/* adhoc client */ |
| { |
| /* update TSF Value */ |
| /* update_TSF23a(pmlmeext, pframe, len); */ |
| |
| /* correcting TSF */ |
| correct_TSF23a(padapter, pmlmeext); |
| |
| /* start beacon */ |
| if (send_beacon23a(padapter) == _FAIL) |
| { |
| pmlmeinfo->FW_sta_info[psta->mac_id].status = 0; |
| |
| pmlmeinfo->state ^= WIFI_FW_ADHOC_STATE; |
| |
| return; |
| } |
| |
| pmlmeinfo->state |= WIFI_FW_ASSOC_SUCCESS; |
| |
| } |
| |
| join_type = 2; |
| rtw_hal_set_hwreg23a(padapter, HW_VAR_MLME_JOIN, (u8 *)(&join_type)); |
| } |
| |
| pmlmeinfo->FW_sta_info[psta->mac_id].psta = psta; |
| |
| /* rate radaptive */ |
| Update_RA_Entry23a(padapter, psta); |
| |
| /* update adhoc sta_info */ |
| update_sta_info23a(padapter, psta); |
| } |
| |
| void mlmeext_sta_del_event_callback23a(struct rtw_adapter *padapter) |
| { |
| struct mlme_ext_priv *pmlmeext = &padapter->mlmeextpriv; |
| struct mlme_ext_info *pmlmeinfo = &pmlmeext->mlmext_info; |
| |
| if (is_client_associated_to_ap23a(padapter) || is_IBSS_empty23a(padapter)) |
| { |
| /* set_opmode_cmd(padapter, infra_client_with_mlme); */ |
| |
| rtw_hal_set_hwreg23a(padapter, HW_VAR_MLME_DISCONNECT, NULL); |
| rtw_hal_set_hwreg23a(padapter, HW_VAR_BSSID, null_addr); |
| |
| /* restore to initial setting. */ |
| update_tx_basic_rate23a(padapter, padapter->registrypriv.wireless_mode); |
| |
| /* switch to the 20M Hz mode after disconnect */ |
| pmlmeext->cur_bwmode = HT_CHANNEL_WIDTH_20; |
| pmlmeext->cur_ch_offset = HAL_PRIME_CHNL_OFFSET_DONT_CARE; |
| |
| /* SelectChannel23a(padapter, pmlmeext->cur_channel, pmlmeext->cur_ch_offset); */ |
| set_channel_bwmode23a(padapter, pmlmeext->cur_channel, pmlmeext->cur_ch_offset, pmlmeext->cur_bwmode); |
| |
| flush_all_cam_entry23a(padapter); |
| |
| pmlmeinfo->state = WIFI_FW_NULL_STATE; |
| |
| /* set MSR to no link state -> infra. mode */ |
| Set_MSR23a(padapter, _HW_STATE_STATION_); |
| |
| del_timer_sync(&pmlmeext->link_timer); |
| } |
| } |
| |
| /**************************************************************************** |
| |
| Following are the functions for the timer handlers |
| |
| *****************************************************************************/ |
| void linked23a_rx_sig_stren_disp(struct rtw_adapter *padapter) |
| { |
| struct mlme_ext_priv *pmlmeext = &padapter->mlmeextpriv; |
| struct mlme_ext_info *pmlmeinfo = &pmlmeext->mlmext_info; |
| u8 mac_id; |
| int UndecoratedSmoothedPWDB; |
| if ((pmlmeinfo->state&0x03) == WIFI_FW_STATION_STATE) |
| mac_id = 0; |
| else if ((pmlmeinfo->state&0x03) == _HW_STATE_AP_) |
| mac_id = 2; |
| |
| rtw_hal_get_def_var23a(padapter, HW_DEF_RA_INFO_DUMP,&mac_id); |
| |
| rtw_hal_get_def_var23a(padapter, HAL_DEF_UNDERCORATEDSMOOTHEDPWDB, &UndecoratedSmoothedPWDB); |
| DBG_8723A("UndecoratedSmoothedPWDB:%d\n", UndecoratedSmoothedPWDB); |
| } |
| |
| static u8 chk_ap_is_alive(struct rtw_adapter *padapter, struct sta_info *psta) |
| { |
| u8 ret = false; |
| |
| if ((sta_rx_data_pkts(psta) == sta_last_rx_data_pkts(psta)) && |
| sta_rx_beacon_pkts(psta) == sta_last_rx_beacon_pkts(psta) && |
| sta_rx_probersp_pkts(psta) == sta_last_rx_probersp_pkts(psta)) |
| ret = false; |
| else |
| ret = true; |
| |
| sta_update_last_rx_pkts(psta); |
| return ret; |
| } |
| |
| void linked_status_chk23a(struct rtw_adapter *padapter) |
| { |
| u32 i; |
| struct sta_info *psta; |
| struct xmit_priv *pxmitpriv = &padapter->xmitpriv; |
| struct mlme_ext_priv *pmlmeext = &padapter->mlmeextpriv; |
| struct mlme_ext_info *pmlmeinfo = &pmlmeext->mlmext_info; |
| struct sta_priv *pstapriv = &padapter->stapriv; |
| |
| if (padapter->bRxRSSIDisplay) |
| linked23a_rx_sig_stren_disp(padapter); |
| |
| rtw_hal_sreset_linked_status_check23a(padapter); |
| |
| if (is_client_associated_to_ap23a(padapter)) |
| { |
| /* linked infrastructure client mode */ |
| |
| int tx_chk = _SUCCESS, rx_chk = _SUCCESS; |
| int rx_chk_limit; |
| |
| rx_chk_limit = 4; |
| |
| if ((psta = rtw_get_stainfo23a(pstapriv, pmlmeinfo->network.MacAddress)) != NULL) |
| { |
| bool is_p2p_enable = false; |
| #ifdef CONFIG_8723AU_P2P |
| is_p2p_enable = !rtw_p2p_chk_state(&padapter->wdinfo, P2P_STATE_NONE); |
| #endif |
| |
| if (chk_ap_is_alive(padapter, psta) == false) |
| rx_chk = _FAIL; |
| |
| if (pxmitpriv->last_tx_pkts == pxmitpriv->tx_pkts) |
| tx_chk = _FAIL; |
| |
| if (pmlmeext->active_keep_alive_check && (rx_chk == _FAIL || tx_chk == _FAIL)) { |
| u8 backup_oper_channel = 0; |
| |
| /* switch to correct channel of current network before issue keep-alive frames */ |
| if (rtw_get_oper_ch23a(padapter) != pmlmeext->cur_channel) { |
| backup_oper_channel = rtw_get_oper_ch23a(padapter); |
| SelectChannel23a(padapter, pmlmeext->cur_channel); |
| } |
| |
| if (rx_chk != _SUCCESS) |
| issue_probereq23a_ex23a(padapter, &pmlmeinfo->network.Ssid, psta->hwaddr, 3, 1); |
| |
| if ((tx_chk != _SUCCESS && pmlmeinfo->link_count++ == 0xf) || rx_chk != _SUCCESS) { |
| tx_chk = issue_nulldata23a(padapter, psta->hwaddr, 0, 3, 1); |
| /* if tx acked and p2p disabled, set rx_chk _SUCCESS to reset retry count */ |
| if (tx_chk == _SUCCESS && !is_p2p_enable) |
| rx_chk = _SUCCESS; |
| } |
| |
| /* back to the original operation channel */ |
| if (backup_oper_channel>0) |
| SelectChannel23a(padapter, backup_oper_channel); |
| |
| } else { |
| if (rx_chk != _SUCCESS) { |
| if (pmlmeext->retry == 0) { |
| issue_probereq23a(padapter, &pmlmeinfo->network.Ssid, pmlmeinfo->network.MacAddress); |
| issue_probereq23a(padapter, &pmlmeinfo->network.Ssid, pmlmeinfo->network.MacAddress); |
| issue_probereq23a(padapter, &pmlmeinfo->network.Ssid, pmlmeinfo->network.MacAddress); |
| } |
| } |
| |
| if (tx_chk != _SUCCESS && pmlmeinfo->link_count++ == 0xf) |
| tx_chk = issue_nulldata23a(padapter, NULL, 0, 1, 0); |
| } |
| |
| if (rx_chk == _FAIL) { |
| pmlmeext->retry++; |
| if (pmlmeext->retry > rx_chk_limit) { |
| DBG_8723A_LEVEL(_drv_always_, FUNC_ADPT_FMT" disconnect or roaming\n", |
| FUNC_ADPT_ARG(padapter)); |
| receive_disconnect23a(padapter, pmlmeinfo->network.MacAddress, |
| WLAN_REASON_EXPIRATION_CHK); |
| return; |
| } |
| } else { |
| pmlmeext->retry = 0; |
| } |
| |
| if (tx_chk == _FAIL) { |
| pmlmeinfo->link_count &= 0xf; |
| } else { |
| pxmitpriv->last_tx_pkts = pxmitpriv->tx_pkts; |
| pmlmeinfo->link_count = 0; |
| } |
| |
| } /* end of if ((psta = rtw_get_stainfo23a(pstapriv, passoc_res->network.MacAddress)) != NULL) */ |
| } |
| else if (is_client_associated_to_ibss23a(padapter)) |
| { |
| /* linked IBSS mode */ |
| /* for each assoc list entry to check the rx pkt counter */ |
| for (i = IBSS_START_MAC_ID; i < NUM_STA; i++) |
| { |
| if (pmlmeinfo->FW_sta_info[i].status == 1) |
| { |
| psta = pmlmeinfo->FW_sta_info[i].psta; |
| |
| if (NULL == psta) continue; |
| |
| if (pmlmeinfo->FW_sta_info[i].rx_pkt == sta_rx_pkts(psta)) |
| { |
| |
| if (pmlmeinfo->FW_sta_info[i].retry<3) |
| { |
| pmlmeinfo->FW_sta_info[i].retry++; |
| } |
| else |
| { |
| pmlmeinfo->FW_sta_info[i].retry = 0; |
| pmlmeinfo->FW_sta_info[i].status = 0; |
| report_del_sta_event23a(padapter, psta->hwaddr, |
| 65535/* indicate disconnect caused by no rx */ |
| ); |
| } |
| } |
| else |
| { |
| pmlmeinfo->FW_sta_info[i].retry = 0; |
| pmlmeinfo->FW_sta_info[i].rx_pkt = (u32)sta_rx_pkts(psta); |
| } |
| } |
| } |
| |
| /* set_link_timer(pmlmeext, DISCONNECT_TO); */ |
| |
| } |
| } |
| |
| static void survey_timer_hdl(unsigned long data) |
| { |
| struct rtw_adapter *padapter = (struct rtw_adapter *)data; |
| struct cmd_obj *ph2c; |
| struct sitesurvey_parm *psurveyPara; |
| struct cmd_priv *pcmdpriv = &padapter->cmdpriv; |
| struct mlme_ext_priv *pmlmeext = &padapter->mlmeextpriv; |
| #ifdef CONFIG_8723AU_P2P |
| struct wifidirect_info *pwdinfo = &padapter->wdinfo; |
| #endif |
| |
| /* issue rtw_sitesurvey_cmd23a */ |
| if (pmlmeext->sitesurvey_res.state > SCAN_START) { |
| if (pmlmeext->sitesurvey_res.state == SCAN_PROCESS) |
| pmlmeext->sitesurvey_res.channel_idx++; |
| |
| if (pmlmeext->scan_abort == true) |
| { |
| #ifdef CONFIG_8723AU_P2P |
| if (!rtw_p2p_chk_state(&padapter->wdinfo, P2P_STATE_NONE)) |
| { |
| rtw_p2p_findphase_ex_set(pwdinfo, P2P_FINDPHASE_EX_MAX); |
| pmlmeext->sitesurvey_res.channel_idx = 3; |
| DBG_8723A("%s idx:%d, cnt:%u\n", __func__, |
| pmlmeext->sitesurvey_res.channel_idx, |
| pwdinfo->find_phase_state_exchange_cnt); |
| } else |
| #endif |
| { |
| pmlmeext->sitesurvey_res.channel_idx = pmlmeext->sitesurvey_res.ch_num; |
| DBG_8723A("%s idx:%d\n", __func__, |
| pmlmeext->sitesurvey_res.channel_idx); |
| } |
| |
| pmlmeext->scan_abort = false;/* reset */ |
| } |
| |
| ph2c = (struct cmd_obj *)kzalloc(sizeof(struct cmd_obj), |
| GFP_ATOMIC); |
| if (!ph2c) |
| goto exit_survey_timer_hdl; |
| |
| psurveyPara = (struct sitesurvey_parm*) |
| kzalloc(sizeof(struct sitesurvey_parm), GFP_ATOMIC); |
| if (!psurveyPara) { |
| kfree(ph2c); |
| goto exit_survey_timer_hdl; |
| } |
| |
| init_h2fwcmd_w_parm_no_rsp(ph2c, psurveyPara, GEN_CMD_CODE(_SiteSurvey)); |
| rtw_enqueue_cmd23a(pcmdpriv, ph2c); |
| } |
| |
| exit_survey_timer_hdl: |
| return; |
| } |
| |
| static void link_timer_hdl(unsigned long data) |
| { |
| struct rtw_adapter *padapter = (struct rtw_adapter *)data; |
| /* static unsigned int rx_pkt = 0; */ |
| /* static u64 tx_cnt = 0; */ |
| /* struct xmit_priv *pxmitpriv = &padapter->xmitpriv; */ |
| struct mlme_ext_priv *pmlmeext = &padapter->mlmeextpriv; |
| struct mlme_ext_info *pmlmeinfo = &pmlmeext->mlmext_info; |
| /* struct sta_priv *pstapriv = &padapter->stapriv; */ |
| |
| if (pmlmeinfo->state & WIFI_FW_AUTH_NULL) |
| { |
| DBG_8723A("link_timer_hdl:no beacon while connecting\n"); |
| pmlmeinfo->state = WIFI_FW_NULL_STATE; |
| report_join_res23a(padapter, -3); |
| } |
| else if (pmlmeinfo->state & WIFI_FW_AUTH_STATE) |
| { |
| /* re-auth timer */ |
| if (++pmlmeinfo->reauth_count > REAUTH_LIMIT) |
| { |
| /* if (pmlmeinfo->auth_algo != dot11AuthAlgrthm_Auto) */ |
| /* */ |
| pmlmeinfo->state = 0; |
| report_join_res23a(padapter, -1); |
| return; |
| /* */ |
| /* else */ |
| /* */ |
| /* pmlmeinfo->auth_algo = dot11AuthAlgrthm_Shared; */ |
| /* pmlmeinfo->reauth_count = 0; */ |
| /* */ |
| } |
| |
| DBG_8723A("link_timer_hdl: auth timeout and try again\n"); |
| pmlmeinfo->auth_seq = 1; |
| issue_auth23a(padapter, NULL, 0); |
| set_link_timer(pmlmeext, REAUTH_TO); |
| } |
| else if (pmlmeinfo->state & WIFI_FW_ASSOC_STATE) |
| { |
| /* re-assoc timer */ |
| if (++pmlmeinfo->reassoc_count > REASSOC_LIMIT) |
| { |
| pmlmeinfo->state = WIFI_FW_NULL_STATE; |
| report_join_res23a(padapter, -2); |
| return; |
| } |
| |
| DBG_8723A("link_timer_hdl: assoc timeout and try again\n"); |
| issue_assocreq23a(padapter); |
| set_link_timer(pmlmeext, REASSOC_TO); |
| } |
| |
| return; |
| } |
| |
| static void addba_timer_hdl(unsigned long data) |
| { |
| struct sta_info *psta = (struct sta_info *)data; |
| struct ht_priv *phtpriv; |
| |
| if (!psta) |
| return; |
| |
| phtpriv = &psta->htpriv; |
| |
| if ((phtpriv->ht_option == true) && (phtpriv->ampdu_enable == true)) |
| { |
| if (phtpriv->candidate_tid_bitmap) |
| phtpriv->candidate_tid_bitmap = 0x0; |
| |
| } |
| } |
| |
| void init_addba_retry_timer23a(struct sta_info *psta) |
| { |
| setup_timer(&psta->addba_retry_timer, addba_timer_hdl, |
| (unsigned long)psta); |
| } |
| |
| void init_mlme_ext_timer23a(struct rtw_adapter *padapter) |
| { |
| struct mlme_ext_priv *pmlmeext = &padapter->mlmeextpriv; |
| |
| setup_timer(&pmlmeext->survey_timer, survey_timer_hdl, |
| (unsigned long)padapter); |
| |
| setup_timer(&pmlmeext->link_timer, link_timer_hdl, |
| (unsigned long)padapter); |
| } |
| |
| u8 NULL_hdl23a(struct rtw_adapter *padapter, u8 *pbuf) |
| { |
| return H2C_SUCCESS; |
| } |
| |
| u8 setopmode_hdl23a(struct rtw_adapter *padapter, u8 *pbuf) |
| { |
| u8 type; |
| struct mlme_ext_priv *pmlmeext = &padapter->mlmeextpriv; |
| struct mlme_ext_info *pmlmeinfo = &pmlmeext->mlmext_info; |
| struct setopmode_parm *psetop = (struct setopmode_parm *)pbuf; |
| |
| if (psetop->mode == Ndis802_11APMode) |
| { |
| pmlmeinfo->state = WIFI_FW_AP_STATE; |
| type = _HW_STATE_AP_; |
| } |
| else if (psetop->mode == Ndis802_11Infrastructure) |
| { |
| pmlmeinfo->state &= ~(BIT(0)|BIT(1));/* clear state */ |
| pmlmeinfo->state |= WIFI_FW_STATION_STATE;/* set to STATION_STATE */ |
| type = _HW_STATE_STATION_; |
| } |
| else if (psetop->mode == Ndis802_11IBSS) |
| { |
| type = _HW_STATE_ADHOC_; |
| } |
| else |
| { |
| type = _HW_STATE_NOLINK_; |
| } |
| |
| rtw_hal_set_hwreg23a(padapter, HW_VAR_SET_OPMODE, (u8 *)(&type)); |
| /* Set_NETYPE0_MSR(padapter, type); */ |
| |
| return H2C_SUCCESS; |
| } |
| |
| u8 createbss_hdl23a(struct rtw_adapter *padapter, u8 *pbuf) |
| { |
| struct mlme_ext_priv *pmlmeext = &padapter->mlmeextpriv; |
| struct mlme_ext_info *pmlmeinfo = &pmlmeext->mlmext_info; |
| struct wlan_bssid_ex *pnetwork = &pmlmeinfo->network; |
| struct wlan_bssid_ex *pparm = (struct wlan_bssid_ex *)pbuf; |
| /* u32 initialgain; */ |
| |
| if (pparm->InfrastructureMode == Ndis802_11APMode) { |
| #ifdef CONFIG_8723AU_AP_MODE |
| |
| if (pmlmeinfo->state == WIFI_FW_AP_STATE) |
| { |
| /* todo: */ |
| return H2C_SUCCESS; |
| } |
| #endif |
| } |
| |
| /* below is for ad-hoc master */ |
| if (pparm->InfrastructureMode == Ndis802_11IBSS) { |
| rtw_joinbss_reset23a(padapter); |
| |
| pmlmeext->cur_bwmode = HT_CHANNEL_WIDTH_20; |
| pmlmeext->cur_ch_offset = HAL_PRIME_CHNL_OFFSET_DONT_CARE; |
| pmlmeinfo->ERP_enable = 0; |
| pmlmeinfo->WMM_enable = 0; |
| pmlmeinfo->HT_enable = 0; |
| pmlmeinfo->HT_caps_enable = 0; |
| pmlmeinfo->HT_info_enable = 0; |
| pmlmeinfo->agg_enable_bitmap = 0; |
| pmlmeinfo->candidate_tid_bitmap = 0; |
| |
| /* disable dynamic functions, such as high power, DIG */ |
| Save_DM_Func_Flag23a(padapter); |
| Switch_DM_Func23a(padapter, DYNAMIC_FUNC_DISABLE, false); |
| |
| /* config the initial gain under linking, need to write the BB registers */ |
| /* initialgain = 0x1E; */ |
| /* rtw_hal_set_hwreg23a(padapter, HW_VAR_INITIAL_GAIN, (u8 *)(&initialgain)); */ |
| |
| /* cancel link timer */ |
| del_timer_sync(&pmlmeext->link_timer); |
| |
| /* clear CAM */ |
| flush_all_cam_entry23a(padapter); |
| |
| if (pparm->IELength > MAX_IE_SZ)/* Check pbuf->IELength */ |
| return H2C_PARAMETERS_ERROR; |
| |
| memcpy(pnetwork, pparm, sizeof(struct wlan_bssid_ex)); |
| |
| start_create_ibss23a(padapter); |
| } |
| |
| return H2C_SUCCESS; |
| } |
| |
| u8 join_cmd_hdl23a(struct rtw_adapter *padapter, u8 *pbuf) |
| { |
| u8 join_type; |
| struct ndis_802_11_var_ies * pIE; |
| struct registry_priv *pregpriv = &padapter->registrypriv; |
| struct mlme_ext_priv *pmlmeext = &padapter->mlmeextpriv; |
| struct mlme_ext_info *pmlmeinfo = &pmlmeext->mlmext_info; |
| struct wlan_bssid_ex *pnetwork = &pmlmeinfo->network; |
| struct wlan_bssid_ex *pparm = (struct wlan_bssid_ex *)pbuf; |
| struct HT_info_element *pht_info; |
| u32 i; |
| /* u32 initialgain; */ |
| /* u32 acparm; */ |
| |
| /* check already connecting to AP or not */ |
| if (pmlmeinfo->state & WIFI_FW_ASSOC_SUCCESS) |
| { |
| if (pmlmeinfo->state & WIFI_FW_STATION_STATE) |
| issue_deauth23a_ex23a(padapter, pnetwork->MacAddress, |
| WLAN_REASON_DEAUTH_LEAVING, 5, 100); |
| |
| pmlmeinfo->state = WIFI_FW_NULL_STATE; |
| |
| /* clear CAM */ |
| flush_all_cam_entry23a(padapter); |
| |
| del_timer_sync(&pmlmeext->link_timer); |
| |
| /* set MSR to nolink -> infra. mode */ |
| /* Set_MSR23a(padapter, _HW_STATE_NOLINK_); */ |
| Set_MSR23a(padapter, _HW_STATE_STATION_); |
| |
| rtw_hal_set_hwreg23a(padapter, HW_VAR_MLME_DISCONNECT, NULL); |
| } |
| |
| rtw_joinbss_reset23a(padapter); |
| |
| pmlmeext->cur_bwmode = HT_CHANNEL_WIDTH_20; |
| pmlmeext->cur_ch_offset = HAL_PRIME_CHNL_OFFSET_DONT_CARE; |
| pmlmeinfo->ERP_enable = 0; |
| pmlmeinfo->WMM_enable = 0; |
| pmlmeinfo->HT_enable = 0; |
| pmlmeinfo->HT_caps_enable = 0; |
| pmlmeinfo->HT_info_enable = 0; |
| pmlmeinfo->agg_enable_bitmap = 0; |
| pmlmeinfo->candidate_tid_bitmap = 0; |
| pmlmeinfo->bwmode_updated = false; |
| /* pmlmeinfo->assoc_AP_vendor = HT_IOT_PEER_MAX; */ |
| |
| if (pparm->IELength > MAX_IE_SZ)/* Check pbuf->IELength */ |
| return H2C_PARAMETERS_ERROR; |
| |
| memcpy(pnetwork, pbuf, sizeof(struct wlan_bssid_ex)); |
| |
| /* Check AP vendor to move rtw_joinbss_cmd23a() */ |
| /* pmlmeinfo->assoc_AP_vendor = check_assoc_AP23a(pnetwork->IEs, |
| pnetwork->IELength); */ |
| |
| for (i = sizeof(struct ndis_802_11_fixed_ies); i < pnetwork->IELength;) |
| { |
| pIE = (struct ndis_802_11_var_ies *)(pnetwork->IEs + i); |
| |
| switch (pIE->ElementID) |
| { |
| case _VENDOR_SPECIFIC_IE_:/* Get WMM IE. */ |
| if (!memcmp(pIE->data, WMM_OUI23A, 4)) |
| pmlmeinfo->WMM_enable = 1; |
| break; |
| |
| case _HT_CAPABILITY_IE_: /* Get HT Cap IE. */ |
| pmlmeinfo->HT_caps_enable = 1; |
| break; |
| |
| case _HT_EXTRA_INFO_IE_: /* Get HT Info IE. */ |
| pmlmeinfo->HT_info_enable = 1; |
| |
| /* spec case only for cisco's ap because cisco's ap |
| * issue assoc rsp using mcs rate @40MHz or @20MHz */ |
| pht_info = (struct HT_info_element *)(pIE->data); |
| |
| if ((pregpriv->cbw40_enable) && |
| (pht_info->infos[0] & BIT(2))) { |
| /* switch to the 40M Hz mode according to AP */ |
| pmlmeext->cur_bwmode = HT_CHANNEL_WIDTH_40; |
| switch (pht_info->infos[0] & 0x3) |
| { |
| case 1: |
| pmlmeext->cur_ch_offset = |
| HAL_PRIME_CHNL_OFFSET_LOWER; |
| break; |
| |
| case 3: |
| pmlmeext->cur_ch_offset = |
| HAL_PRIME_CHNL_OFFSET_UPPER; |
| break; |
| |
| default: |
| pmlmeext->cur_ch_offset = |
| HAL_PRIME_CHNL_OFFSET_DONT_CARE; |
| break; |
| } |
| |
| DBG_8723A("set ch/bw before connected\n"); |
| } |
| break; |
| |
| default: |
| break; |
| } |
| |
| i += (pIE->Length + 2); |
| } |
| /* disable dynamic functions, such as high power, DIG */ |
| /* Switch_DM_Func23a(padapter, DYNAMIC_FUNC_DISABLE, false); */ |
| |
| /* config the initial gain under linking, need to write the BB |
| registers */ |
| /* initialgain = 0x1E; */ |
| /* rtw_hal_set_hwreg23a(padapter, HW_VAR_INITIAL_GAIN, |
| (u8 *)(&initialgain)); */ |
| |
| rtw_hal_set_hwreg23a(padapter, HW_VAR_BSSID, |
| pmlmeinfo->network.MacAddress); |
| join_type = 0; |
| rtw_hal_set_hwreg23a(padapter, HW_VAR_MLME_JOIN, (u8 *)(&join_type)); |
| |
| /* cancel link timer */ |
| del_timer_sync(&pmlmeext->link_timer); |
| |
| start_clnt_join23a(padapter); |
| |
| return H2C_SUCCESS; |
| } |
| |
| u8 disconnect_hdl23a(struct rtw_adapter *padapter, unsigned char *pbuf) |
| { |
| struct disconnect_parm *param = (struct disconnect_parm *)pbuf; |
| struct mlme_ext_priv *pmlmeext = &padapter->mlmeextpriv; |
| struct mlme_ext_info *pmlmeinfo = &pmlmeext->mlmext_info; |
| struct wlan_bssid_ex *pnetwork = &pmlmeinfo->network; |
| u8 val8; |
| |
| if (is_client_associated_to_ap23a(padapter)) |
| { |
| issue_deauth23a_ex23a(padapter, pnetwork->MacAddress, WLAN_REASON_DEAUTH_LEAVING, param->deauth_timeout_ms/100, 100); |
| } |
| |
| /* set_opmode_cmd(padapter, infra_client_with_mlme); */ |
| |
| /* pmlmeinfo->state = WIFI_FW_NULL_STATE; */ |
| |
| rtw_hal_set_hwreg23a(padapter, HW_VAR_MLME_DISCONNECT, NULL); |
| rtw_hal_set_hwreg23a(padapter, HW_VAR_BSSID, null_addr); |
| |
| /* restore to initial setting. */ |
| update_tx_basic_rate23a(padapter, padapter->registrypriv.wireless_mode); |
| |
| if (((pmlmeinfo->state&0x03) == WIFI_FW_ADHOC_STATE) || ((pmlmeinfo->state&0x03) == WIFI_FW_AP_STATE)) |
| { |
| /* Stop BCN */ |
| val8 = 0; |
| rtw_hal_set_hwreg23a(padapter, HW_VAR_BCN_FUNC, (u8 *)(&val8)); |
| } |
| |
| /* set MSR to no link state -> infra. mode */ |
| Set_MSR23a(padapter, _HW_STATE_STATION_); |
| |
| pmlmeinfo->state = WIFI_FW_NULL_STATE; |
| |
| /* switch to the 20M Hz mode after disconnect */ |
| pmlmeext->cur_bwmode = HT_CHANNEL_WIDTH_20; |
| pmlmeext->cur_ch_offset = HAL_PRIME_CHNL_OFFSET_DONT_CARE; |
| |
| set_channel_bwmode23a(padapter, pmlmeext->cur_channel, pmlmeext->cur_ch_offset, pmlmeext->cur_bwmode); |
| |
| flush_all_cam_entry23a(padapter); |
| |
| del_timer_sync(&pmlmeext->link_timer); |
| |
| rtw_free_uc_swdec_pending_queue23a(padapter); |
| |
| return H2C_SUCCESS; |
| } |
| |
| static int rtw_scan_ch_decision(struct rtw_adapter *padapter, struct rtw_ieee80211_channel *out, |
| u32 out_num, struct rtw_ieee80211_channel *in, u32 in_num) |
| { |
| int i, j; |
| int scan_ch_num = 0; |
| int set_idx; |
| struct mlme_ext_priv *pmlmeext = &padapter->mlmeextpriv; |
| |
| /* clear out first */ |
| memset(out, 0, sizeof(struct rtw_ieee80211_channel)*out_num); |
| |
| /* acquire channels from in */ |
| j = 0; |
| for (i = 0;i<in_num;i++) { |
| if (0) |
| DBG_8723A(FUNC_ADPT_FMT" "CHAN_FMT"\n", FUNC_ADPT_ARG(padapter), CHAN_ARG(&in[i])); |
| if (in[i].hw_value && !(in[i].flags & IEEE80211_CHAN_DISABLED) |
| && (set_idx = rtw_ch_set_search_ch23a(pmlmeext->channel_set, in[i].hw_value)) >= 0 |
| ) |
| { |
| memcpy(&out[j], &in[i], sizeof(struct rtw_ieee80211_channel)); |
| |
| if (pmlmeext->channel_set[set_idx].ScanType == SCAN_PASSIVE) |
| out[j].flags &= IEEE80211_CHAN_NO_IR; |
| |
| j++; |
| } |
| if (j>= out_num) |
| break; |
| } |
| |
| /* if out is empty, use channel_set as default */ |
| if (j == 0) { |
| for (i = 0;i<pmlmeext->max_chan_nums;i++) { |
| out[i].hw_value = pmlmeext->channel_set[i].ChannelNum; |
| |
| if (pmlmeext->channel_set[i].ScanType == SCAN_PASSIVE) |
| out[i].flags &= IEEE80211_CHAN_NO_IR; |
| |
| j++; |
| } |
| } |
| |
| if (padapter->setband == GHZ_24) { /* 2.4G */ |
| for (i = 0; i < j ; i++) { |
| if (out[i].hw_value > 35) |
| memset(&out[i], 0, |
| sizeof(struct rtw_ieee80211_channel)); |
| else |
| scan_ch_num++; |
| } |
| j = scan_ch_num; |
| } else if (padapter->setband == GHZ_50) { /* 5G */ |
| for (i = 0; i < j ; i++) { |
| if (out[i].hw_value > 35) { |
| memcpy(&out[scan_ch_num++], &out[i], sizeof(struct rtw_ieee80211_channel)); |
| } |
| } |
| j = scan_ch_num; |
| } else |
| {} |
| |
| return j; |
| } |
| |
| u8 sitesurvey_cmd_hdl23a(struct rtw_adapter *padapter, u8 *pbuf) |
| { |
| struct mlme_ext_priv *pmlmeext = &padapter->mlmeextpriv; |
| struct sitesurvey_parm *pparm = (struct sitesurvey_parm *)pbuf; |
| u8 bdelayscan = false; |
| u8 val8; |
| u32 initialgain; |
| u32 i; |
| |
| if (pmlmeext->sitesurvey_res.state == SCAN_DISABLE) { |
| /* for first time sitesurvey_cmd */ |
| rtw_hal_set_hwreg23a(padapter, HW_VAR_CHECK_TXBUF, NULL); |
| |
| pmlmeext->sitesurvey_res.state = SCAN_START; |
| pmlmeext->sitesurvey_res.bss_cnt = 0; |
| pmlmeext->sitesurvey_res.channel_idx = 0; |
| |
| for (i = 0; i < RTW_SSID_SCAN_AMOUNT; i++) { |
| if (pparm->ssid[i].ssid_len) { |
| memcpy(pmlmeext->sitesurvey_res.ssid[i].ssid, |
| pparm->ssid[i].ssid, IW_ESSID_MAX_SIZE); |
| pmlmeext->sitesurvey_res.ssid[i].ssid_len = |
| pparm->ssid[i].ssid_len; |
| } else { |
| pmlmeext->sitesurvey_res.ssid[i].ssid_len = 0; |
| } |
| } |
| |
| pmlmeext->sitesurvey_res.ch_num = |
| rtw_scan_ch_decision(padapter, |
| pmlmeext->sitesurvey_res.ch, |
| RTW_CHANNEL_SCAN_AMOUNT, |
| pparm->ch, pparm->ch_num); |
| |
| pmlmeext->sitesurvey_res.scan_mode = pparm->scan_mode; |
| |
| /* issue null data if associating to the AP */ |
| if (is_client_associated_to_ap23a(padapter)) { |
| pmlmeext->sitesurvey_res.state = SCAN_TXNULL; |
| |
| /* switch to correct channel of current network |
| before issue keep-alive frames */ |
| if (rtw_get_oper_ch23a(padapter) != pmlmeext->cur_channel) |
| SelectChannel23a(padapter, pmlmeext->cur_channel); |
| |
| issue_nulldata23a(padapter, NULL, 1, 3, 500); |
| |
| bdelayscan = true; |
| } |
| |
| if (bdelayscan) { |
| /* delay 50ms to protect nulldata(1). */ |
| set_survey_timer(pmlmeext, 50); |
| return H2C_SUCCESS; |
| } |
| } |
| |
| if ((pmlmeext->sitesurvey_res.state == SCAN_START) || |
| (pmlmeext->sitesurvey_res.state == SCAN_TXNULL)) { |
| /* disable dynamic functions, such as high power, DIG */ |
| Save_DM_Func_Flag23a(padapter); |
| Switch_DM_Func23a(padapter, DYNAMIC_FUNC_DISABLE, false); |
| |
| /* config the initial gain under scaning, need to |
| write the BB registers */ |
| if ((wdev_to_priv(padapter->rtw_wdev))->p2p_enabled == true) { |
| initialgain = 0x30; |
| } else |
| initialgain = 0x1E; |
| |
| rtw_hal_set_hwreg23a(padapter, HW_VAR_INITIAL_GAIN, |
| (u8 *)(&initialgain)); |
| |
| /* set MSR to no link state */ |
| Set_MSR23a(padapter, _HW_STATE_NOLINK_); |
| |
| val8 = 1; /* under site survey */ |
| rtw_hal_set_hwreg23a(padapter, HW_VAR_MLME_SITESURVEY, |
| (u8 *)(&val8)); |
| |
| pmlmeext->sitesurvey_res.state = SCAN_PROCESS; |
| } |
| |
| site_survey23a(padapter); |
| |
| return H2C_SUCCESS; |
| } |
| |
| u8 setauth_hdl23a(struct rtw_adapter *padapter, unsigned char *pbuf) |
| { |
| struct setauth_parm *pparm = (struct setauth_parm *)pbuf; |
| struct mlme_ext_priv *pmlmeext = &padapter->mlmeextpriv; |
| struct mlme_ext_info *pmlmeinfo = &pmlmeext->mlmext_info; |
| |
| if (pparm->mode < 4) |
| { |
| pmlmeinfo->auth_algo = pparm->mode; |
| } |
| |
| return H2C_SUCCESS; |
| } |
| |
| u8 setkey_hdl23a(struct rtw_adapter *padapter, u8 *pbuf) |
| { |
| unsigned short ctrl; |
| struct setkey_parm *pparm = (struct setkey_parm *)pbuf; |
| struct mlme_ext_priv *pmlmeext = &padapter->mlmeextpriv; |
| struct mlme_ext_info *pmlmeinfo = &pmlmeext->mlmext_info; |
| unsigned char null_sta[] = {0x00, 0x00, 0x00, 0x00, 0x00, 0x00}; |
| |
| /* main tx key for wep. */ |
| if (pparm->set_tx) |
| pmlmeinfo->key_index = pparm->keyid; |
| |
| /* write cam */ |
| ctrl = BIT(15) | ((pparm->algorithm) << 2) | pparm->keyid; |
| |
| DBG_8723A_LEVEL(_drv_always_, "set group key to hw: alg:%d(WEP40-1 WEP104-5 TKIP-2 AES-4) " |
| "keyid:%d\n", pparm->algorithm, pparm->keyid); |
| write_cam23a(padapter, pparm->keyid, ctrl, null_sta, pparm->key); |
| |
| /* allow multicast packets to driver */ |
| padapter->HalFunc.SetHwRegHandler(padapter, HW_VAR_ON_RCR_AM, null_addr); |
| |
| return H2C_SUCCESS; |
| } |
| |
| u8 set_stakey_hdl23a(struct rtw_adapter *padapter, u8 *pbuf) |
| { |
| u16 ctrl = 0; |
| u8 cam_id;/* cam_entry */ |
| struct mlme_ext_priv *pmlmeext = &padapter->mlmeextpriv; |
| struct mlme_ext_info *pmlmeinfo = &pmlmeext->mlmext_info; |
| struct set_stakey_parm *pparm = (struct set_stakey_parm *)pbuf; |
| |
| /* cam_entry: */ |
| /* 0~3 for default key */ |
| |
| /* for concurrent mode (ap+sta): */ |
| /* default key is disable, using sw encrypt/decrypt */ |
| /* cam_entry = 4 for sta mode (macid = 0) */ |
| /* cam_entry(macid+3) = 5 ~ N for ap mode (aid = 1~N, macid = 2 ~N) */ |
| |
| /* for concurrent mode (sta+sta): */ |
| /* default key is disable, using sw encrypt/decrypt */ |
| /* cam_entry = 4 mapping to macid = 0 */ |
| /* cam_entry = 5 mapping to macid = 2 */ |
| |
| cam_id = 4; |
| |
| DBG_8723A_LEVEL(_drv_always_, "set pairwise key to hw: alg:%d(WEP40-1 WEP104-5 TKIP-2 AES-4) camid:%d\n", |
| pparm->algorithm, cam_id); |
| if ((pmlmeinfo->state&0x03) == WIFI_FW_AP_STATE) |
| { |
| |
| struct sta_info *psta; |
| struct sta_priv *pstapriv = &padapter->stapriv; |
| |
| if (pparm->algorithm == _NO_PRIVACY_) /* clear cam entry */ |
| { |
| clear_cam_entry23a(padapter, pparm->id); |
| return H2C_SUCCESS_RSP; |
| } |
| |
| psta = rtw_get_stainfo23a(pstapriv, pparm->addr); |
| if (psta) |
| { |
| ctrl = (BIT(15) | ((pparm->algorithm) << 2)); |
| |
| DBG_8723A("r871x_set_stakey_hdl23a(): enc_algorithm =%d\n", pparm->algorithm); |
| |
| if ((psta->mac_id<1) || (psta->mac_id>(NUM_STA-4))) |
| { |
| DBG_8723A("r871x_set_stakey_hdl23a():set_stakey failed, mac_id(aid) =%d\n", psta->mac_id); |
| return H2C_REJECTED; |
| } |
| |
| cam_id = (psta->mac_id + 3);/* 0~3 for default key, cmd_id = macid + 3, macid = aid+1; */ |
| |
| DBG_8723A("Write CAM, mac_addr =%x:%x:%x:%x:%x:%x, cam_entry =%d\n", pparm->addr[0], |
| pparm->addr[1], pparm->addr[2], pparm->addr[3], pparm->addr[4], |
| pparm->addr[5], cam_id); |
| |
| write_cam23a(padapter, cam_id, ctrl, pparm->addr, pparm->key); |
| |
| return H2C_SUCCESS_RSP; |
| |
| } |
| else |
| { |
| DBG_8723A("r871x_set_stakey_hdl23a(): sta has been free\n"); |
| return H2C_REJECTED; |
| } |
| |
| } |
| |
| /* below for sta mode */ |
| |
| if (pparm->algorithm == _NO_PRIVACY_) /* clear cam entry */ |
| { |
| clear_cam_entry23a(padapter, pparm->id); |
| return H2C_SUCCESS; |
| } |
| |
| ctrl = BIT(15) | ((pparm->algorithm) << 2); |
| |
| write_cam23a(padapter, cam_id, ctrl, pparm->addr, pparm->key); |
| |
| pmlmeinfo->enc_algo = pparm->algorithm; |
| |
| return H2C_SUCCESS; |
| } |
| |
| u8 add_ba_hdl23a(struct rtw_adapter *padapter, unsigned char *pbuf) |
| { |
| struct addBaReq_parm *pparm = (struct addBaReq_parm *)pbuf; |
| struct mlme_ext_priv *pmlmeext = &padapter->mlmeextpriv; |
| struct mlme_ext_info *pmlmeinfo = &pmlmeext->mlmext_info; |
| |
| struct sta_info *psta = rtw_get_stainfo23a(&padapter->stapriv, pparm->addr); |
| |
| if (!psta) |
| return H2C_SUCCESS; |
| |
| if (((pmlmeinfo->state & WIFI_FW_ASSOC_SUCCESS) && |
| (pmlmeinfo->HT_enable)) || |
| ((pmlmeinfo->state & 0x03) == WIFI_FW_AP_STATE)) { |
| issue_action_BA23a(padapter, pparm->addr, |
| WLAN_ACTION_ADDBA_REQ, (u16)pparm->tid); |
| mod_timer(&psta->addba_retry_timer, |
| jiffies + msecs_to_jiffies(ADDBA_TO)); |
| } else { |
| psta->htpriv.candidate_tid_bitmap &= ~CHKBIT(pparm->tid); |
| } |
| return H2C_SUCCESS; |
| } |
| |
| u8 set_tx_beacon_cmd23a(struct rtw_adapter* padapter) |
| { |
| struct cmd_obj *ph2c; |
| struct Tx_Beacon_param *ptxBeacon_parm; |
| struct cmd_priv *pcmdpriv = &padapter->cmdpriv; |
| struct mlme_ext_priv *pmlmeext = &padapter->mlmeextpriv; |
| struct mlme_ext_info *pmlmeinfo = &pmlmeext->mlmext_info; |
| u8 res = _SUCCESS; |
| int len_diff = 0; |
| |
| |
| |
| ph2c = (struct cmd_obj *)kzalloc(sizeof(struct cmd_obj), GFP_ATOMIC); |
| if (!ph2c) { |
| res = _FAIL; |
| goto exit; |
| } |
| |
| ptxBeacon_parm = (struct Tx_Beacon_param *) |
| kzalloc(sizeof(struct Tx_Beacon_param), GFP_ATOMIC); |
| if (!ptxBeacon_parm) { |
| kfree(ph2c); |
| res = _FAIL; |
| goto exit; |
| } |
| |
| memcpy(&ptxBeacon_parm->network, &pmlmeinfo->network, |
| sizeof(struct wlan_bssid_ex)); |
| |
| len_diff = update_hidden_ssid( |
| ptxBeacon_parm->network.IEs+_BEACON_IE_OFFSET_, |
| ptxBeacon_parm->network.IELength-_BEACON_IE_OFFSET_, |
| pmlmeinfo->hidden_ssid_mode); |
| ptxBeacon_parm->network.IELength += len_diff; |
| |
| init_h2fwcmd_w_parm_no_rsp(ph2c, ptxBeacon_parm, GEN_CMD_CODE(_TX_Beacon)); |
| |
| res = rtw_enqueue_cmd23a(pcmdpriv, ph2c); |
| |
| exit: |
| |
| |
| |
| return res; |
| } |
| |
| u8 mlme_evt_hdl23a(struct rtw_adapter *padapter, unsigned char *pbuf) |
| { |
| u8 evt_code, evt_seq; |
| u16 evt_sz; |
| uint *peventbuf; |
| void (*event_callback)(struct rtw_adapter *dev, u8 *pbuf); |
| struct evt_priv *pevt_priv = &padapter->evtpriv; |
| |
| peventbuf = (uint*)pbuf; |
| evt_sz = (u16)(*peventbuf&0xffff); |
| evt_seq = (u8)((*peventbuf>>24)&0x7f); |
| evt_code = (u8)((*peventbuf>>16)&0xff); |
| |
| /* checking if event code is valid */ |
| if (evt_code >= MAX_C2HEVT) { |
| RT_TRACE(_module_rtl871x_cmd_c_, _drv_err_, ("\nEvent Code(%d) mismatch!\n", evt_code)); |
| goto _abort_event_; |
| } |
| |
| /* checking if event size match the event parm size */ |
| if ((wlanevents[evt_code].parmsize != 0) && |
| (wlanevents[evt_code].parmsize != evt_sz)) { |
| RT_TRACE(_module_rtl871x_cmd_c_, _drv_err_, ("\nEvent(%d) Parm Size mismatch (%d vs %d)!\n", |
| evt_code, wlanevents[evt_code].parmsize, evt_sz)); |
| goto _abort_event_; |
| } |
| |
| atomic_inc(&pevt_priv->event_seq); |
| |
| peventbuf += 2; |
| |
| if (peventbuf) { |
| event_callback = wlanevents[evt_code].event_callback; |
| event_callback(padapter, (u8*)peventbuf); |
| |
| pevt_priv->evt_done_cnt++; |
| } |
| |
| _abort_event_: |
| |
| return H2C_SUCCESS; |
| } |
| |
| u8 h2c_msg_hdl23a(struct rtw_adapter *padapter, unsigned char *pbuf) |
| { |
| if (!pbuf) |
| return H2C_PARAMETERS_ERROR; |
| |
| return H2C_SUCCESS; |
| } |
| |
| u8 tx_beacon_hdl23a(struct rtw_adapter *padapter, unsigned char *pbuf) |
| { |
| if (send_beacon23a(padapter) == _FAIL) |
| { |
| DBG_8723A("issue_beacon23a, fail!\n"); |
| return H2C_PARAMETERS_ERROR; |
| } |
| #ifdef CONFIG_8723AU_AP_MODE |
| else /* tx bc/mc frames after update TIM */ |
| { |
| struct sta_info *psta_bmc; |
| struct list_head *plist, *phead, *ptmp; |
| struct xmit_frame *pxmitframe; |
| struct xmit_priv *pxmitpriv = &padapter->xmitpriv; |
| struct sta_priv *pstapriv = &padapter->stapriv; |
| |
| /* for BC/MC Frames */ |
| psta_bmc = rtw_get_bcmc_stainfo23a(padapter); |
| if (!psta_bmc) |
| return H2C_SUCCESS; |
| |
| if ((pstapriv->tim_bitmap&BIT(0)) && (psta_bmc->sleepq_len>0)) |
| { |
| msleep(10);/* 10ms, ATIM(HIQ) Windows */ |
| /* spin_lock_bh(&psta_bmc->sleep_q.lock); */ |
| spin_lock_bh(&pxmitpriv->lock); |
| |
| phead = get_list_head(&psta_bmc->sleep_q); |
| |
| list_for_each_safe(plist, ptmp, phead) { |
| pxmitframe = container_of(plist, |
| struct xmit_frame, |
| list); |
| |
| list_del_init(&pxmitframe->list); |
| |
| psta_bmc->sleepq_len--; |
| if (psta_bmc->sleepq_len>0) |
| pxmitframe->attrib.mdata = 1; |
| else |
| pxmitframe->attrib.mdata = 0; |
| |
| pxmitframe->attrib.triggered = 1; |
| |
| pxmitframe->attrib.qsel = 0x11;/* HIQ */ |
| |
| rtw_hal_xmit23aframe_enqueue(padapter, pxmitframe); |
| } |
| |
| /* spin_unlock_bh(&psta_bmc->sleep_q.lock); */ |
| spin_unlock_bh(&pxmitpriv->lock); |
| } |
| |
| } |
| #endif |
| |
| return H2C_SUCCESS; |
| } |
| |
| u8 set_ch_hdl23a(struct rtw_adapter *padapter, u8 *pbuf) |
| { |
| struct set_ch_parm *set_ch_parm; |
| struct mlme_ext_priv *pmlmeext = &padapter->mlmeextpriv; |
| |
| if (!pbuf) |
| return H2C_PARAMETERS_ERROR; |
| |
| set_ch_parm = (struct set_ch_parm *)pbuf; |
| |
| DBG_8723A(FUNC_NDEV_FMT" ch:%u, bw:%u, ch_offset:%u\n", |
| FUNC_NDEV_ARG(padapter->pnetdev), |
| set_ch_parm->ch, set_ch_parm->bw, set_ch_parm->ch_offset); |
| |
| pmlmeext->cur_channel = set_ch_parm->ch; |
| pmlmeext->cur_ch_offset = set_ch_parm->ch_offset; |
| pmlmeext->cur_bwmode = set_ch_parm->bw; |
| |
| set_channel_bwmode23a(padapter, set_ch_parm->ch, set_ch_parm->ch_offset, set_ch_parm->bw); |
| |
| return H2C_SUCCESS; |
| } |
| |
| u8 set_chplan_hdl23a(struct rtw_adapter *padapter, unsigned char *pbuf) |
| { |
| struct SetChannelPlan_param *setChannelPlan_param; |
| struct mlme_ext_priv *pmlmeext = &padapter->mlmeextpriv; |
| |
| if (!pbuf) |
| return H2C_PARAMETERS_ERROR; |
| |
| setChannelPlan_param = (struct SetChannelPlan_param *)pbuf; |
| |
| pmlmeext->max_chan_nums = init_channel_set(padapter, setChannelPlan_param->channel_plan, pmlmeext->channel_set); |
| init_channel_list(padapter, pmlmeext->channel_set, pmlmeext->max_chan_nums, &pmlmeext->channel_list); |
| |
| return H2C_SUCCESS; |
| } |
| |
| u8 led_blink_hdl23a(struct rtw_adapter *padapter, unsigned char *pbuf) |
| { |
| struct LedBlink_param *ledBlink_param; |
| |
| if (!pbuf) |
| return H2C_PARAMETERS_ERROR; |
| |
| ledBlink_param = (struct LedBlink_param *)pbuf; |
| |
| return H2C_SUCCESS; |
| } |
| |
| u8 set_csa_hdl23a(struct rtw_adapter *padapter, unsigned char *pbuf) |
| { |
| return H2C_REJECTED; |
| } |
| |
| /* TDLS_WRCR : write RCR DATA BIT */ |
| /* TDLS_SD_PTI : issue peer traffic indication */ |
| /* TDLS_CS_OFF : go back to the channel linked with AP, terminating channel switch procedure */ |
| /* TDLS_INIT_CH_SEN : init channel sensing, receive all data and mgnt frame */ |
| /* TDLS_DONE_CH_SEN: channel sensing and report candidate channel */ |
| /* TDLS_OFF_CH : first time set channel to off channel */ |
| /* TDLS_BASE_CH : go back tp the channel linked with AP when set base channel as target channel */ |
| /* TDLS_P_OFF_CH : periodically go to off channel */ |
| /* TDLS_P_BASE_CH : periodically go back to base channel */ |
| /* TDLS_RS_RCR : restore RCR */ |
| /* TDLS_CKALV_PH1 : check alive timer phase1 */ |
| /* TDLS_CKALV_PH2 : check alive timer phase2 */ |
| /* TDLS_FREE_STA : free tdls sta */ |
| u8 tdls_hdl23a(struct rtw_adapter *padapter, unsigned char *pbuf) |
| { |
| return H2C_REJECTED; |
| } |