Merge tag 'cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC cleanups from Arnd Bergmann:
"A large number of cleanups, all over the platforms. This is dominated
largely by the Samsung platforms (s3c, s5p, exynos) and a few of the
others moving code out of arch/arm into more appropriate subsystems.
The clocksource and irqchip drivers are now abstracted to the point
where platforms that are already cleaned up do not need to even
specify the driver they use, it can all get configured from the device
tree as we do for normal device drivers. The clocksource changes
basically touch every single platform in the process.
We further clean up the use of platform specific header files here,
with the goal of turning more of the platforms over to being
"multiplatform" enabled, which implies that they cannot expose their
headers to architecture independent code any more.
It is expected that no functional changes are part of the cleanup.
The overall reduction in total code lines is mostly the result of
removing broken and obsolete code."
* tag 'cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (133 commits)
ARM: mvebu: correct gated clock documentation
ARM: kirkwood: add missing include for nsa310
ARM: exynos: move exynos4210-combiner to drivers/irqchip
mfd: db8500-prcmu: update resource passing
drivers/db8500-cpufreq: delete dangling include
ARM: at91: remove NEOCORE 926 board
sunxi: Cleanup the reset code and add meaningful registers defines
ARM: S3C24XX: header mach/regs-mem.h local
ARM: S3C24XX: header mach/regs-power.h local
ARM: S3C24XX: header mach/regs-s3c2412-mem.h local
ARM: S3C24XX: Remove plat-s3c24xx directory in arch/arm/
ARM: S3C24XX: transform s3c2443 subirqs into new structure
ARM: S3C24XX: modify s3c2443 irq init to initialize all irqs
ARM: S3C24XX: move s3c2443 irq code to irq.c
ARM: S3C24XX: transform s3c2416 irqs into new structure
ARM: S3C24XX: modify s3c2416 irq init to initialize all irqs
ARM: S3C24XX: move s3c2416 irq init to common irq code
ARM: S3C24XX: Modify s3c_irq_wake to use the hwirq property
ARM: S3C24XX: Move irq syscore-ops to irq-pm
clocksource: always define CLOCKSOURCE_OF_DECLARE
...
diff --git a/Documentation/devicetree/bindings/clock/mvebu-gated-clock.txt b/Documentation/devicetree/bindings/clock/mvebu-gated-clock.txt
index 7337005e..cffc93d 100644
--- a/Documentation/devicetree/bindings/clock/mvebu-gated-clock.txt
+++ b/Documentation/devicetree/bindings/clock/mvebu-gated-clock.txt
@@ -89,7 +89,7 @@
16 xor1 XOR DMA 1
17 crypto CESA engine
18 pex1 PCIe Cntrl 1
-19 ge1 Gigabit Ethernet 0
+19 ge1 Gigabit Ethernet 1
20 tdm Time Division Mplx
Required properties:
diff --git a/MAINTAINERS b/MAINTAINERS
index 22b754a..f4da1b8 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -4231,6 +4231,7 @@
S: Maintained
T: git git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git irq/core
F: kernel/irq/
+F: drivers/irqchip/
IRQ DOMAINS (IRQ NUMBER MAPPING LIBRARY)
M: Benjamin Herrenschmidt <benh@kernel.crashing.org>
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 09238c8..c038431 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -344,10 +344,10 @@
select ARM_ERRATA_411920
select ARM_TIMER_SP804
select CLKDEV_LOOKUP
+ select CLKSRC_OF
select COMMON_CLK
select CPU_V6
select GENERIC_CLOCKEVENTS
- select GENERIC_GPIO
select MULTI_IRQ_HANDLER
select PINCTRL
select PINCTRL_BCM2835
@@ -642,9 +642,9 @@
select ARCH_HAS_CPUFREQ
select CLKDEV_LOOKUP
select CLKSRC_MMIO
+ select CLKSRC_OF
select COMMON_CLK
select GENERIC_CLOCKEVENTS
- select GENERIC_GPIO
select HAVE_CLK
select HAVE_SMP
select MIGHT_HAVE_CACHE_L2X0
@@ -744,7 +744,6 @@
select ARCH_HAS_CPUFREQ
select ARCH_USES_GETTIMEOFFSET
select CLKDEV_LOOKUP
- select GENERIC_GPIO
select HAVE_CLK
select HAVE_S3C2410_I2C if I2C
select HAVE_S3C2410_WATCHDOG if WATCHDOG
@@ -787,7 +786,6 @@
select CLKSRC_MMIO
select CPU_V6
select GENERIC_CLOCKEVENTS
- select GENERIC_GPIO
select HAVE_CLK
select HAVE_S3C2410_I2C if I2C
select HAVE_S3C2410_WATCHDOG if WATCHDOG
@@ -802,7 +800,6 @@
select ARCH_USES_GETTIMEOFFSET
select CLKDEV_LOOKUP
select CPU_V7
- select GENERIC_GPIO
select HAVE_CLK
select HAVE_S3C2410_I2C if I2C
select HAVE_S3C2410_WATCHDOG if WATCHDOG
@@ -820,7 +817,6 @@
select CLKSRC_MMIO
select CPU_V7
select GENERIC_CLOCKEVENTS
- select GENERIC_GPIO
select HAVE_CLK
select HAVE_S3C2410_I2C if I2C
select HAVE_S3C2410_WATCHDOG if WATCHDOG
@@ -838,7 +834,6 @@
select CLKDEV_LOOKUP
select CPU_V7
select GENERIC_CLOCKEVENTS
- select GENERIC_GPIO
select HAVE_CLK
select HAVE_S3C2410_I2C if I2C
select HAVE_S3C2410_WATCHDOG if WATCHDOG
@@ -873,7 +868,6 @@
select COMMON_CLK
select CPU_ARM926T
select GENERIC_CLOCKEVENTS
- select GENERIC_GPIO
select HAVE_TCM
select SPARSE_IRQ
help
@@ -957,7 +951,6 @@
select COMMON_CLK
select CPU_ARM926T
select GENERIC_CLOCKEVENTS
- select GENERIC_GPIO
select HAVE_CLK
select MULTI_IRQ_HANDLER
select SPARSE_IRQ
@@ -1086,17 +1079,12 @@
source "arch/arm/mach-sa1100/Kconfig"
source "arch/arm/plat-samsung/Kconfig"
-source "arch/arm/plat-s3c24xx/Kconfig"
source "arch/arm/mach-socfpga/Kconfig"
source "arch/arm/plat-spear/Kconfig"
source "arch/arm/mach-s3c24xx/Kconfig"
-if ARCH_S3C24XX
-source "arch/arm/mach-s3c2412/Kconfig"
-source "arch/arm/mach-s3c2440/Kconfig"
-endif
if ARCH_S3C64XX
source "arch/arm/mach-s3c64xx/Kconfig"
diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
index fc2a591..ad375a5 100644
--- a/arch/arm/Kconfig.debug
+++ b/arch/arm/Kconfig.debug
@@ -219,12 +219,12 @@
Say Y here if you want kernel low-level debugging support
on i.MX51.
- config DEBUG_IMX50_IMX53_UART
- bool "i.MX50 and i.MX53 Debug UART"
- depends on SOC_IMX50 || SOC_IMX53
+ config DEBUG_IMX53_UART
+ bool "i.MX53 Debug UART"
+ depends on SOC_IMX53
help
Say Y here if you want kernel low-level debugging support
- on i.MX50 or i.MX53.
+ on i.MX53.
config DEBUG_IMX6Q_UART
bool "i.MX6Q Debug UART"
@@ -497,7 +497,7 @@
DEBUG_IMX21_IMX27_UART || \
DEBUG_IMX31_IMX35_UART || \
DEBUG_IMX51_UART || \
- DEBUG_IMX50_IMX53_UART ||\
+ DEBUG_IMX53_UART ||\
DEBUG_IMX6Q_UART
default "debug/highbank.S" if DEBUG_HIGHBANK_UART
default "debug/mvebu.S" if DEBUG_MVEBU_UART
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index 4bcd2d6..1b70716 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -173,7 +173,7 @@
machine-$(CONFIG_ARCH_PXA) += pxa
machine-$(CONFIG_ARCH_REALVIEW) += realview
machine-$(CONFIG_ARCH_RPC) += rpc
-machine-$(CONFIG_ARCH_S3C24XX) += s3c24xx s3c2412 s3c2440
+machine-$(CONFIG_ARCH_S3C24XX) += s3c24xx
machine-$(CONFIG_ARCH_S3C64XX) += s3c64xx
machine-$(CONFIG_ARCH_S5P64X0) += s5p64x0
machine-$(CONFIG_ARCH_S5PC100) += s5pc100
@@ -204,7 +204,7 @@
plat-$(CONFIG_PLAT_IOP) += iop
plat-$(CONFIG_PLAT_ORION) += orion
plat-$(CONFIG_PLAT_PXA) += pxa
-plat-$(CONFIG_PLAT_S3C24XX) += s3c24xx samsung
+plat-$(CONFIG_PLAT_S3C24XX) += samsung
plat-$(CONFIG_PLAT_S5P) += samsung
plat-$(CONFIG_PLAT_SPEAR) += spear
plat-$(CONFIG_PLAT_VERSATILE) += versatile
diff --git a/arch/arm/boot/compressed/decompress.c b/arch/arm/boot/compressed/decompress.c
index 9deb56a..24b0475 100644
--- a/arch/arm/boot/compressed/decompress.c
+++ b/arch/arm/boot/compressed/decompress.c
@@ -13,8 +13,6 @@
#define STATIC static
#define STATIC_RW_DATA /* non-static please */
-#define ARCH_HAS_DECOMP_WDOG
-
/* Diagnostic functions */
#ifdef DEBUG
# define Assert(cond,msg) {if(!(cond)) error(msg);}
diff --git a/arch/arm/common/Kconfig b/arch/arm/common/Kconfig
index 45ceeb0..9353184 100644
--- a/arch/arm/common/Kconfig
+++ b/arch/arm/common/Kconfig
@@ -1,26 +1,3 @@
-config ARM_GIC
- bool
- select IRQ_DOMAIN
- select MULTI_IRQ_HANDLER
-
-config GIC_NON_BANKED
- bool
-
-config ARM_VIC
- bool
- select IRQ_DOMAIN
- select MULTI_IRQ_HANDLER
-
-config ARM_VIC_NR
- int
- default 4 if ARCH_S5PV210
- default 3 if ARCH_S5PC100
- default 2
- depends on ARM_VIC
- help
- The maximum number of VICs available in the system, for
- power management.
-
config ICST
bool
diff --git a/arch/arm/common/Makefile b/arch/arm/common/Makefile
index e8a4e58..dc8dd0d 100644
--- a/arch/arm/common/Makefile
+++ b/arch/arm/common/Makefile
@@ -2,8 +2,6 @@
# Makefile for the linux kernel.
#
-obj-$(CONFIG_ARM_GIC) += gic.o
-obj-$(CONFIG_ARM_VIC) += vic.o
obj-$(CONFIG_ICST) += icst.o
obj-$(CONFIG_SA1111) += sa1111.o
obj-$(CONFIG_PCI_HOST_VIA82C505) += via82c505.o
diff --git a/arch/arm/configs/at91sam9263_defconfig b/arch/arm/configs/at91sam9263_defconfig
index c5212f4..36fed66b 100644
--- a/arch/arm/configs/at91sam9263_defconfig
+++ b/arch/arm/configs/at91sam9263_defconfig
@@ -18,7 +18,6 @@
CONFIG_ARCH_AT91SAM9263=y
CONFIG_MACH_AT91SAM9263EK=y
CONFIG_MACH_USB_A9263=y
-CONFIG_MACH_NEOCORE926=y
CONFIG_MTD_AT91_DATAFLASH_CARD=y
# CONFIG_ARM_THUMB is not set
CONFIG_AEABI=y
diff --git a/arch/arm/configs/imx_v6_v7_defconfig b/arch/arm/configs/imx_v6_v7_defconfig
index 6966713..6dddbf8 100644
--- a/arch/arm/configs/imx_v6_v7_defconfig
+++ b/arch/arm/configs/imx_v6_v7_defconfig
@@ -32,7 +32,6 @@
CONFIG_MACH_MX35_3DS=y
CONFIG_MACH_VPR200=y
CONFIG_MACH_IMX51_DT=y
-CONFIG_MACH_MX51_3DS=y
CONFIG_MACH_EUKREA_CPUIMX51SD=y
CONFIG_SOC_IMX53=y
CONFIG_SOC_IMX6Q=y
diff --git a/arch/arm/include/asm/mach/arch.h b/arch/arm/include/asm/mach/arch.h
index 917d4fc..308ad7d 100644
--- a/arch/arm/include/asm/mach/arch.h
+++ b/arch/arm/include/asm/mach/arch.h
@@ -12,7 +12,6 @@
struct tag;
struct meminfo;
-struct sys_timer;
struct pt_regs;
struct smp_operations;
#ifdef CONFIG_SMP
@@ -48,7 +47,7 @@
void (*map_io)(void);/* IO mapping function */
void (*init_early)(void);
void (*init_irq)(void);
- struct sys_timer *timer; /* system tick timer */
+ void (*init_time)(void);
void (*init_machine)(void);
void (*init_late)(void);
#ifdef CONFIG_MULTI_IRQ_HANDLER
diff --git a/arch/arm/include/asm/mach/irq.h b/arch/arm/include/asm/mach/irq.h
index 15cb035..18c8830 100644
--- a/arch/arm/include/asm/mach/irq.h
+++ b/arch/arm/include/asm/mach/irq.h
@@ -22,6 +22,7 @@
#ifdef CONFIG_MULTI_IRQ_HANDLER
extern void (*handle_arch_irq)(struct pt_regs *);
+extern void set_handle_irq(void (*handle_irq)(struct pt_regs *));
#endif
/*
diff --git a/arch/arm/include/asm/mach/time.h b/arch/arm/include/asm/mach/time.h
index 6ca945f..90c12e1 100644
--- a/arch/arm/include/asm/mach/time.h
+++ b/arch/arm/include/asm/mach/time.h
@@ -10,36 +10,6 @@
#ifndef __ASM_ARM_MACH_TIME_H
#define __ASM_ARM_MACH_TIME_H
-/*
- * This is our kernel timer structure.
- *
- * - init
- * Initialise the kernels jiffy timer source, claim interrupt
- * using setup_irq. This is called early on during initialisation
- * while interrupts are still disabled on the local CPU.
- * - suspend
- * Suspend the kernel jiffy timer source, if necessary. This
- * is called with interrupts disabled, after all normal devices
- * have been suspended. If no action is required, set this to
- * NULL.
- * - resume
- * Resume the kernel jiffy timer source, if necessary. This
- * is called with interrupts disabled before any normal devices
- * are resumed. If no action is required, set this to NULL.
- * - offset
- * Return the timer offset in microseconds since the last timer
- * interrupt. Note: this must take account of any unprocessed
- * timer interrupt which may be pending.
- */
-struct sys_timer {
- void (*init)(void);
- void (*suspend)(void);
- void (*resume)(void);
-#ifdef CONFIG_ARCH_USES_GETTIMEOFFSET
- unsigned long (*offset)(void);
-#endif
-};
-
extern void timer_tick(void);
struct timespec;
diff --git a/arch/arm/include/debug/imx.S b/arch/arm/include/debug/imx.S
index 0c4e17d..c6f294c 100644
--- a/arch/arm/include/debug/imx.S
+++ b/arch/arm/include/debug/imx.S
@@ -34,7 +34,7 @@
#define UART_PADDR 0x43f90000
#elif defined (CONFIG_DEBUG_IMX51_UART)
#define UART_PADDR 0x73fbc000
-#elif defined (CONFIG_DEBUG_IMX50_IMX53_UART)
+#elif defined (CONFIG_DEBUG_IMX53_UART)
#define UART_PADDR 0x53fbc000
#elif defined (CONFIG_DEBUG_IMX6Q_UART)
#define UART_PADDR IMX6Q_DEBUG_UART_BASE
diff --git a/arch/arm/kernel/irq.c b/arch/arm/kernel/irq.c
index 8961650..8e4ef4c 100644
--- a/arch/arm/kernel/irq.c
+++ b/arch/arm/kernel/irq.c
@@ -117,6 +117,16 @@
machine_desc->init_irq();
}
+#ifdef CONFIG_MULTI_IRQ_HANDLER
+void __init set_handle_irq(void (*handle_irq)(struct pt_regs *))
+{
+ if (handle_arch_irq)
+ return;
+
+ handle_arch_irq = handle_irq;
+}
+#endif
+
#ifdef CONFIG_SPARSE_IRQ
int __init arch_probe_nr_irqs(void)
{
diff --git a/arch/arm/kernel/smp.c b/arch/arm/kernel/smp.c
index 365c8d9..60340fa 100644
--- a/arch/arm/kernel/smp.c
+++ b/arch/arm/kernel/smp.c
@@ -401,7 +401,8 @@
void __init set_smp_cross_call(void (*fn)(const struct cpumask *, unsigned int))
{
- smp_cross_call = fn;
+ if (!smp_cross_call)
+ smp_cross_call = fn;
}
void arch_send_call_function_ipi_mask(const struct cpumask *mask)
diff --git a/arch/arm/kernel/smp_twd.c b/arch/arm/kernel/smp_twd.c
index ae0c7bb..c092115 100644
--- a/arch/arm/kernel/smp_twd.c
+++ b/arch/arm/kernel/smp_twd.c
@@ -24,7 +24,6 @@
#include <asm/smp_twd.h>
#include <asm/localtimer.h>
-#include <asm/hardware/gic.h>
/* set up by the platform code */
static void __iomem *twd_base;
diff --git a/arch/arm/kernel/time.c b/arch/arm/kernel/time.c
index 09be0c3..955d92d 100644
--- a/arch/arm/kernel/time.c
+++ b/arch/arm/kernel/time.c
@@ -21,7 +21,6 @@
#include <linux/timex.h>
#include <linux/errno.h>
#include <linux/profile.h>
-#include <linux/syscore_ops.h>
#include <linux/timer.h>
#include <linux/irq.h>
@@ -31,11 +30,6 @@
#include <asm/mach/arch.h>
#include <asm/mach/time.h>
-/*
- * Our system timer.
- */
-static struct sys_timer *system_timer;
-
#if defined(CONFIG_RTC_DRV_CMOS) || defined(CONFIG_RTC_DRV_CMOS_MODULE) || \
defined(CONFIG_NVRAM) || defined(CONFIG_NVRAM_MODULE)
/* this needs a better home */
@@ -69,16 +63,6 @@
EXPORT_SYMBOL(profile_pc);
#endif
-#ifdef CONFIG_ARCH_USES_GETTIMEOFFSET
-u32 arch_gettimeoffset(void)
-{
- if (system_timer->offset != NULL)
- return system_timer->offset() * 1000;
-
- return 0;
-}
-#endif /* CONFIG_ARCH_USES_GETTIMEOFFSET */
-
#ifndef CONFIG_GENERIC_CLOCKEVENTS
/*
* Kernel system timer support.
@@ -129,43 +113,8 @@
return -EINVAL;
}
-#if defined(CONFIG_PM) && !defined(CONFIG_GENERIC_CLOCKEVENTS)
-static int timer_suspend(void)
-{
- if (system_timer->suspend)
- system_timer->suspend();
-
- return 0;
-}
-
-static void timer_resume(void)
-{
- if (system_timer->resume)
- system_timer->resume();
-}
-#else
-#define timer_suspend NULL
-#define timer_resume NULL
-#endif
-
-static struct syscore_ops timer_syscore_ops = {
- .suspend = timer_suspend,
- .resume = timer_resume,
-};
-
-static int __init timer_init_syscore_ops(void)
-{
- register_syscore_ops(&timer_syscore_ops);
-
- return 0;
-}
-
-device_initcall(timer_init_syscore_ops);
-
void __init time_init(void)
{
- system_timer = machine_desc->timer;
- system_timer->init();
+ machine_desc->init_time();
sched_clock_postinit();
}
-
diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
index 958358c..6071f4c 100644
--- a/arch/arm/mach-at91/Kconfig
+++ b/arch/arm/mach-at91/Kconfig
@@ -352,12 +352,6 @@
Select this if you are using a Calao Systems USB-A9263.
<http://www.calao-systems.com>
-config MACH_NEOCORE926
- bool "Adeneo NEOCORE926"
- select HAVE_AT91_DATAFLASH_CARD
- help
- Select this if you are using the Adeneo Neocore 926 board.
-
endif
# ----------------------------------------------------------
diff --git a/arch/arm/mach-at91/Makefile b/arch/arm/mach-at91/Makefile
index b38a1dc..39218ca 100644
--- a/arch/arm/mach-at91/Makefile
+++ b/arch/arm/mach-at91/Makefile
@@ -66,7 +66,6 @@
# AT91SAM9263 board-specific support
obj-$(CONFIG_MACH_AT91SAM9263EK) += board-sam9263ek.o
obj-$(CONFIG_MACH_USB_A9263) += board-usb-a926x.o
-obj-$(CONFIG_MACH_NEOCORE926) += board-neocore926.o
# AT91SAM9RL board-specific support
obj-$(CONFIG_MACH_AT91SAM9RLEK) += board-sam9rlek.o
diff --git a/arch/arm/mach-at91/at91rm9200_time.c b/arch/arm/mach-at91/at91rm9200_time.c
index cafe988..2acdff4 100644
--- a/arch/arm/mach-at91/at91rm9200_time.c
+++ b/arch/arm/mach-at91/at91rm9200_time.c
@@ -174,7 +174,6 @@
static struct clock_event_device clkevt = {
.name = "at91_tick",
.features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
- .shift = 32,
.rating = 150,
.set_next_event = clkevt32k_next_event,
.set_mode = clkevt32k_mode,
@@ -265,17 +264,10 @@
at91_st_write(AT91_ST_RTMR, 1);
/* Setup timer clockevent, with minimum of two ticks (important!!) */
- clkevt.mult = div_sc(AT91_SLOW_CLOCK, NSEC_PER_SEC, clkevt.shift);
- clkevt.max_delta_ns = clockevent_delta2ns(AT91_ST_ALMV, &clkevt);
- clkevt.min_delta_ns = clockevent_delta2ns(2, &clkevt) + 1;
clkevt.cpumask = cpumask_of(0);
- clockevents_register_device(&clkevt);
+ clockevents_config_and_register(&clkevt, AT91_SLOW_CLOCK,
+ 2, AT91_ST_ALMV);
/* register clocksource */
clocksource_register_hz(&clk32k, AT91_SLOW_CLOCK);
}
-
-struct sys_timer at91rm9200_timer = {
- .init = at91rm9200_timer_init,
-};
-
diff --git a/arch/arm/mach-at91/at91sam926x_time.c b/arch/arm/mach-at91/at91sam926x_time.c
index 358412f..3a4bc2e 100644
--- a/arch/arm/mach-at91/at91sam926x_time.c
+++ b/arch/arm/mach-at91/at91sam926x_time.c
@@ -104,12 +104,38 @@
}
}
+static void at91sam926x_pit_suspend(struct clock_event_device *cedev)
+{
+ /* Disable timer */
+ pit_write(AT91_PIT_MR, 0);
+}
+
+static void at91sam926x_pit_reset(void)
+{
+ /* Disable timer and irqs */
+ pit_write(AT91_PIT_MR, 0);
+
+ /* Clear any pending interrupts, wait for PIT to stop counting */
+ while (PIT_CPIV(pit_read(AT91_PIT_PIVR)) != 0)
+ cpu_relax();
+
+ /* Start PIT but don't enable IRQ */
+ pit_write(AT91_PIT_MR, (pit_cycle - 1) | AT91_PIT_PITEN);
+}
+
+static void at91sam926x_pit_resume(struct clock_event_device *cedev)
+{
+ at91sam926x_pit_reset();
+}
+
static struct clock_event_device pit_clkevt = {
.name = "pit",
.features = CLOCK_EVT_FEAT_PERIODIC,
.shift = 32,
.rating = 100,
.set_mode = pit_clkevt_mode,
+ .suspend = at91sam926x_pit_suspend,
+ .resume = at91sam926x_pit_resume,
};
@@ -150,19 +176,6 @@
.irq = NR_IRQS_LEGACY + AT91_ID_SYS,
};
-static void at91sam926x_pit_reset(void)
-{
- /* Disable timer and irqs */
- pit_write(AT91_PIT_MR, 0);
-
- /* Clear any pending interrupts, wait for PIT to stop counting */
- while (PIT_CPIV(pit_read(AT91_PIT_PIVR)) != 0)
- cpu_relax();
-
- /* Start PIT but don't enable IRQ */
- pit_write(AT91_PIT_MR, (pit_cycle - 1) | AT91_PIT_PITEN);
-}
-
#ifdef CONFIG_OF
static struct of_device_id pit_timer_ids[] = {
{ .compatible = "atmel,at91sam9260-pit" },
@@ -211,7 +224,7 @@
/*
* Set up both clocksource and clockevent support.
*/
-static void __init at91sam926x_pit_init(void)
+void __init at91sam926x_pit_init(void)
{
unsigned long pit_rate;
unsigned bits;
@@ -250,12 +263,6 @@
clockevents_register_device(&pit_clkevt);
}
-static void at91sam926x_pit_suspend(void)
-{
- /* Disable timer */
- pit_write(AT91_PIT_MR, 0);
-}
-
void __init at91sam926x_ioremap_pit(u32 addr)
{
#if defined(CONFIG_OF)
@@ -272,9 +279,3 @@
if (!pit_base_addr)
panic("Impossible to ioremap PIT\n");
}
-
-struct sys_timer at91sam926x_timer = {
- .init = at91sam926x_pit_init,
- .suspend = at91sam926x_pit_suspend,
- .resume = at91sam926x_pit_reset,
-};
diff --git a/arch/arm/mach-at91/at91x40_time.c b/arch/arm/mach-at91/at91x40_time.c
index 0e57e44..0c07a44 100644
--- a/arch/arm/mach-at91/at91x40_time.c
+++ b/arch/arm/mach-at91/at91x40_time.c
@@ -42,9 +42,10 @@
#define AT91_TC_CLK1BASE 0x40
#define AT91_TC_CLK2BASE 0x80
-static unsigned long at91x40_gettimeoffset(void)
+static u32 at91x40_gettimeoffset(void)
{
- return (at91_tc_read(AT91_TC_CLK1BASE + AT91_TC_CV) * 1000000 / (AT91X40_MASTER_CLOCK / 128));
+ return (at91_tc_read(AT91_TC_CLK1BASE + AT91_TC_CV) * 1000000 /
+ (AT91X40_MASTER_CLOCK / 128)) * 1000;
}
static irqreturn_t at91x40_timer_interrupt(int irq, void *dev_id)
@@ -64,6 +65,8 @@
{
unsigned int v;
+ arch_gettimeoffset = at91x40_gettimeoffset;
+
at91_tc_write(AT91_TC_BCR, 0);
v = at91_tc_read(AT91_TC_BMR);
v = (v & ~AT91_TC_TC1XC1S) | AT91_TC_TC1XC1S_NONE;
@@ -79,9 +82,3 @@
at91_tc_write(AT91_TC_CLK1BASE + AT91_TC_CCR, (AT91_TC_SWTRG | AT91_TC_CLKEN));
}
-
-struct sys_timer at91x40_timer = {
- .init = at91x40_timer_init,
- .offset = at91x40_gettimeoffset,
-};
-
diff --git a/arch/arm/mach-at91/board-1arm.c b/arch/arm/mach-at91/board-1arm.c
index b99b575..35ab632 100644
--- a/arch/arm/mach-at91/board-1arm.c
+++ b/arch/arm/mach-at91/board-1arm.c
@@ -90,7 +90,7 @@
MACHINE_START(ONEARM, "Ajeco 1ARM single board computer")
/* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
- .timer = &at91rm9200_timer,
+ .init_time = at91rm9200_timer_init,
.map_io = at91_map_io,
.handle_irq = at91_aic_handle_irq,
.init_early = onearm_init_early,
diff --git a/arch/arm/mach-at91/board-afeb-9260v1.c b/arch/arm/mach-at91/board-afeb-9260v1.c
index 854b979..f95e31c 100644
--- a/arch/arm/mach-at91/board-afeb-9260v1.c
+++ b/arch/arm/mach-at91/board-afeb-9260v1.c
@@ -210,7 +210,7 @@
MACHINE_START(AFEB9260, "Custom afeb9260 board")
/* Maintainer: Sergey Lapin <slapin@ossfans.org> */
- .timer = &at91sam926x_timer,
+ .init_time = at91sam926x_pit_init,
.map_io = at91_map_io,
.handle_irq = at91_aic_handle_irq,
.init_early = afeb9260_init_early,
diff --git a/arch/arm/mach-at91/board-cam60.c b/arch/arm/mach-at91/board-cam60.c
index 28a18ce..ade948b 100644
--- a/arch/arm/mach-at91/board-cam60.c
+++ b/arch/arm/mach-at91/board-cam60.c
@@ -187,7 +187,7 @@
MACHINE_START(CAM60, "KwikByte CAM60")
/* Maintainer: KwikByte */
- .timer = &at91sam926x_timer,
+ .init_time = at91sam926x_pit_init,
.map_io = at91_map_io,
.handle_irq = at91_aic_handle_irq,
.init_early = cam60_init_early,
diff --git a/arch/arm/mach-at91/board-carmeva.c b/arch/arm/mach-at91/board-carmeva.c
index c17bb53..9298305 100644
--- a/arch/arm/mach-at91/board-carmeva.c
+++ b/arch/arm/mach-at91/board-carmeva.c
@@ -157,7 +157,7 @@
MACHINE_START(CARMEVA, "Carmeva")
/* Maintainer: Conitec Datasystems */
- .timer = &at91rm9200_timer,
+ .init_time = at91rm9200_timer_init,
.map_io = at91_map_io,
.handle_irq = at91_aic_handle_irq,
.init_early = carmeva_init_early,
diff --git a/arch/arm/mach-at91/board-cpu9krea.c b/arch/arm/mach-at91/board-cpu9krea.c
index 8474324..008527e 100644
--- a/arch/arm/mach-at91/board-cpu9krea.c
+++ b/arch/arm/mach-at91/board-cpu9krea.c
@@ -374,7 +374,7 @@
MACHINE_START(CPUAT9G20, "Eukrea CPU9G20")
#endif
/* Maintainer: Eric Benard - EUKREA Electromatique */
- .timer = &at91sam926x_timer,
+ .init_time = at91sam926x_pit_init,
.map_io = at91_map_io,
.handle_irq = at91_aic_handle_irq,
.init_early = cpu9krea_init_early,
diff --git a/arch/arm/mach-at91/board-cpuat91.c b/arch/arm/mach-at91/board-cpuat91.c
index 2a7af78..42f1353 100644
--- a/arch/arm/mach-at91/board-cpuat91.c
+++ b/arch/arm/mach-at91/board-cpuat91.c
@@ -178,7 +178,7 @@
MACHINE_START(CPUAT91, "Eukrea")
/* Maintainer: Eric Benard - EUKREA Electromatique */
- .timer = &at91rm9200_timer,
+ .init_time = at91rm9200_timer_init,
.map_io = at91_map_io,
.handle_irq = at91_aic_handle_irq,
.init_early = cpuat91_init_early,
diff --git a/arch/arm/mach-at91/board-csb337.c b/arch/arm/mach-at91/board-csb337.c
index 48a531e..e5fde215 100644
--- a/arch/arm/mach-at91/board-csb337.c
+++ b/arch/arm/mach-at91/board-csb337.c
@@ -251,7 +251,7 @@
MACHINE_START(CSB337, "Cogent CSB337")
/* Maintainer: Bill Gatliff */
- .timer = &at91rm9200_timer,
+ .init_time = at91rm9200_timer_init,
.map_io = at91_map_io,
.handle_irq = at91_aic_handle_irq,
.init_early = csb337_init_early,
diff --git a/arch/arm/mach-at91/board-csb637.c b/arch/arm/mach-at91/board-csb637.c
index ec0f3ab..fdf1106 100644
--- a/arch/arm/mach-at91/board-csb637.c
+++ b/arch/arm/mach-at91/board-csb637.c
@@ -132,7 +132,7 @@
MACHINE_START(CSB637, "Cogent CSB637")
/* Maintainer: Bill Gatliff */
- .timer = &at91rm9200_timer,
+ .init_time = at91rm9200_timer_init,
.map_io = at91_map_io,
.handle_irq = at91_aic_handle_irq,
.init_early = csb637_init_early,
diff --git a/arch/arm/mach-at91/board-dt.c b/arch/arm/mach-at91/board-dt.c
index 881170c..8db3013 100644
--- a/arch/arm/mach-at91/board-dt.c
+++ b/arch/arm/mach-at91/board-dt.c
@@ -49,7 +49,7 @@
DT_MACHINE_START(at91sam_dt, "Atmel AT91SAM (Device Tree)")
/* Maintainer: Atmel */
- .timer = &at91sam926x_timer,
+ .init_time = at91sam926x_pit_init,
.map_io = at91_map_io,
.handle_irq = at91_aic_handle_irq,
.init_early = at91_dt_initialize,
diff --git a/arch/arm/mach-at91/board-eb01.c b/arch/arm/mach-at91/board-eb01.c
index b489388..becf0a6 100644
--- a/arch/arm/mach-at91/board-eb01.c
+++ b/arch/arm/mach-at91/board-eb01.c
@@ -44,7 +44,7 @@
MACHINE_START(AT91EB01, "Atmel AT91 EB01")
/* Maintainer: Greg Ungerer <gerg@snapgear.com> */
- .timer = &at91x40_timer,
+ .init_time = at91x40_timer_init,
.handle_irq = at91_aic_handle_irq,
.init_early = at91eb01_init_early,
.init_irq = at91eb01_init_irq,
diff --git a/arch/arm/mach-at91/board-eb9200.c b/arch/arm/mach-at91/board-eb9200.c
index 9f5e71c..f9be816 100644
--- a/arch/arm/mach-at91/board-eb9200.c
+++ b/arch/arm/mach-at91/board-eb9200.c
@@ -116,7 +116,7 @@
}
MACHINE_START(ATEB9200, "Embest ATEB9200")
- .timer = &at91rm9200_timer,
+ .init_time = at91rm9200_timer_init,
.map_io = at91_map_io,
.handle_irq = at91_aic_handle_irq,
.init_early = eb9200_init_early,
diff --git a/arch/arm/mach-at91/board-ecbat91.c b/arch/arm/mach-at91/board-ecbat91.c
index ef69e0e..b2fcd71 100644
--- a/arch/arm/mach-at91/board-ecbat91.c
+++ b/arch/arm/mach-at91/board-ecbat91.c
@@ -181,7 +181,7 @@
MACHINE_START(ECBAT91, "emQbit's ECB_AT91")
/* Maintainer: emQbit.com */
- .timer = &at91rm9200_timer,
+ .init_time = at91rm9200_timer_init,
.map_io = at91_map_io,
.handle_irq = at91_aic_handle_irq,
.init_early = ecb_at91init_early,
diff --git a/arch/arm/mach-at91/board-eco920.c b/arch/arm/mach-at91/board-eco920.c
index 50f3d37..77de410 100644
--- a/arch/arm/mach-at91/board-eco920.c
+++ b/arch/arm/mach-at91/board-eco920.c
@@ -149,7 +149,7 @@
MACHINE_START(ECO920, "eco920")
/* Maintainer: Sascha Hauer */
- .timer = &at91rm9200_timer,
+ .init_time = at91rm9200_timer_init,
.map_io = at91_map_io,
.handle_irq = at91_aic_handle_irq,
.init_early = eco920_init_early,
diff --git a/arch/arm/mach-at91/board-flexibity.c b/arch/arm/mach-at91/board-flexibity.c
index 5d44eba..737c085 100644
--- a/arch/arm/mach-at91/board-flexibity.c
+++ b/arch/arm/mach-at91/board-flexibity.c
@@ -159,7 +159,7 @@
MACHINE_START(FLEXIBITY, "Flexibity Connect")
/* Maintainer: Maxim Osipov */
- .timer = &at91sam926x_timer,
+ .init_time = at91sam926x_pit_init,
.map_io = at91_map_io,
.handle_irq = at91_aic_handle_irq,
.init_early = flexibity_init_early,
diff --git a/arch/arm/mach-at91/board-foxg20.c b/arch/arm/mach-at91/board-foxg20.c
index 191d37c..2ea7059 100644
--- a/arch/arm/mach-at91/board-foxg20.c
+++ b/arch/arm/mach-at91/board-foxg20.c
@@ -261,7 +261,7 @@
MACHINE_START(ACMENETUSFOXG20, "Acme Systems srl FOX Board G20")
/* Maintainer: Sergio Tanzilli */
- .timer = &at91sam926x_timer,
+ .init_time = at91sam926x_pit_init,
.map_io = at91_map_io,
.handle_irq = at91_aic_handle_irq,
.init_early = foxg20_init_early,
diff --git a/arch/arm/mach-at91/board-gsia18s.c b/arch/arm/mach-at91/board-gsia18s.c
index 23a2fa1..c1d61d2 100644
--- a/arch/arm/mach-at91/board-gsia18s.c
+++ b/arch/arm/mach-at91/board-gsia18s.c
@@ -574,7 +574,7 @@
}
MACHINE_START(GSIA18S, "GS_IA18_S")
- .timer = &at91sam926x_timer,
+ .init_time = at91sam926x_pit_init,
.map_io = at91_map_io,
.handle_irq = at91_aic_handle_irq,
.init_early = gsia18s_init_early,
diff --git a/arch/arm/mach-at91/board-kafa.c b/arch/arm/mach-at91/board-kafa.c
index 9a43d1e..88e2f5d 100644
--- a/arch/arm/mach-at91/board-kafa.c
+++ b/arch/arm/mach-at91/board-kafa.c
@@ -103,7 +103,7 @@
MACHINE_START(KAFA, "Sperry-Sun KAFA")
/* Maintainer: Sergei Sharonov */
- .timer = &at91rm9200_timer,
+ .init_time = at91rm9200_timer_init,
.map_io = at91_map_io,
.handle_irq = at91_aic_handle_irq,
.init_early = kafa_init_early,
diff --git a/arch/arm/mach-at91/board-kb9202.c b/arch/arm/mach-at91/board-kb9202.c
index f168bec..0c519d9 100644
--- a/arch/arm/mach-at91/board-kb9202.c
+++ b/arch/arm/mach-at91/board-kb9202.c
@@ -149,7 +149,7 @@
MACHINE_START(KB9200, "KB920x")
/* Maintainer: KwikByte, Inc. */
- .timer = &at91rm9200_timer,
+ .init_time = at91rm9200_timer_init,
.map_io = at91_map_io,
.handle_irq = at91_aic_handle_irq,
.init_early = kb9202_init_early,
diff --git a/arch/arm/mach-at91/board-neocore926.c b/arch/arm/mach-at91/board-neocore926.c
deleted file mode 100644
index bc7a1c4..0000000
--- a/arch/arm/mach-at91/board-neocore926.c
+++ /dev/null
@@ -1,387 +0,0 @@
-/*
- * linux/arch/arm/mach-at91/board-neocore926.c
- *
- * Copyright (C) 2005 SAN People
- * Copyright (C) 2007 Atmel Corporation
- * Copyright (C) 2008 ADENEO.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#include <linux/types.h>
-#include <linux/gpio.h>
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/ads7846.h>
-#include <linux/fb.h>
-#include <linux/gpio_keys.h>
-#include <linux/input.h>
-
-#include <video/atmel_lcdc.h>
-
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-#include <asm/irq.h>
-#include <asm/sizes.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <mach/hardware.h>
-#include <mach/at91sam9_smc.h>
-
-#include "at91_aic.h"
-#include "board.h"
-#include "sam9_smc.h"
-#include "generic.h"
-
-
-static void __init neocore926_init_early(void)
-{
- /* Initialize processor: 20 MHz crystal */
- at91_initialize(20000000);
-}
-
-/*
- * USB Host port
- */
-static struct at91_usbh_data __initdata neocore926_usbh_data = {
- .ports = 2,
- .vbus_pin = { AT91_PIN_PA24, AT91_PIN_PA21 },
- .overcurrent_pin= {-EINVAL, -EINVAL},
-};
-
-/*
- * USB Device port
- */
-static struct at91_udc_data __initdata neocore926_udc_data = {
- .vbus_pin = AT91_PIN_PA25,
- .pullup_pin = -EINVAL, /* pull-up driven by UDC */
-};
-
-
-/*
- * ADS7846 Touchscreen
- */
-#if defined(CONFIG_TOUCHSCREEN_ADS7846) || defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE)
-static int ads7843_pendown_state(void)
-{
- return !at91_get_gpio_value(AT91_PIN_PA15); /* Touchscreen PENIRQ */
-}
-
-static struct ads7846_platform_data ads_info = {
- .model = 7843,
- .x_min = 150,
- .x_max = 3830,
- .y_min = 190,
- .y_max = 3830,
- .vref_delay_usecs = 100,
- .x_plate_ohms = 450,
- .y_plate_ohms = 250,
- .pressure_max = 15000,
- .debounce_max = 1,
- .debounce_rep = 0,
- .debounce_tol = (~0),
- .get_pendown_state = ads7843_pendown_state,
-};
-
-static void __init neocore926_add_device_ts(void)
-{
- at91_set_B_periph(AT91_PIN_PA15, 1); /* External IRQ1, with pullup */
- at91_set_gpio_input(AT91_PIN_PC13, 1); /* Touchscreen BUSY signal */
-}
-#else
-static void __init neocore926_add_device_ts(void) {}
-#endif
-
-/*
- * SPI devices.
- */
-static struct spi_board_info neocore926_spi_devices[] = {
-#if defined(CONFIG_MTD_AT91_DATAFLASH_CARD)
- { /* DataFlash card */
- .modalias = "mtd_dataflash",
- .chip_select = 0,
- .max_speed_hz = 15 * 1000 * 1000,
- .bus_num = 0,
- },
-#endif
-#if defined(CONFIG_TOUCHSCREEN_ADS7846) || defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE)
- {
- .modalias = "ads7846",
- .chip_select = 1,
- .max_speed_hz = 125000 * 16,
- .bus_num = 0,
- .platform_data = &ads_info,
- .irq = NR_IRQS_LEGACY + AT91SAM9263_ID_IRQ1,
- },
-#endif
-};
-
-
-/*
- * MCI (SD/MMC)
- */
-static struct mci_platform_data __initdata neocore926_mci0_data = {
- .slot[0] = {
- .bus_width = 4,
- .detect_pin = AT91_PIN_PE18,
- .wp_pin = AT91_PIN_PE19,
- },
-};
-
-
-/*
- * MACB Ethernet device
- */
-static struct macb_platform_data __initdata neocore926_macb_data = {
- .phy_irq_pin = AT91_PIN_PE31,
- .is_rmii = 1,
-};
-
-
-/*
- * NAND flash
- */
-static struct mtd_partition __initdata neocore926_nand_partition[] = {
- {
- .name = "Linux Kernel", /* "Partition 1", */
- .offset = 0,
- .size = SZ_8M,
- },
- {
- .name = "Filesystem", /* "Partition 2", */
- .offset = MTDPART_OFS_NXTBLK,
- .size = SZ_32M,
- },
- {
- .name = "Free", /* "Partition 3", */
- .offset = MTDPART_OFS_NXTBLK,
- .size = MTDPART_SIZ_FULL,
- },
-};
-
-static struct atmel_nand_data __initdata neocore926_nand_data = {
- .ale = 21,
- .cle = 22,
- .rdy_pin = AT91_PIN_PB19,
- .rdy_pin_active_low = 1,
- .enable_pin = AT91_PIN_PD15,
- .ecc_mode = NAND_ECC_SOFT,
- .parts = neocore926_nand_partition,
- .num_parts = ARRAY_SIZE(neocore926_nand_partition),
- .det_pin = -EINVAL,
-};
-
-static struct sam9_smc_config __initdata neocore926_nand_smc_config = {
- .ncs_read_setup = 0,
- .nrd_setup = 1,
- .ncs_write_setup = 0,
- .nwe_setup = 1,
-
- .ncs_read_pulse = 4,
- .nrd_pulse = 4,
- .ncs_write_pulse = 4,
- .nwe_pulse = 4,
-
- .read_cycle = 6,
- .write_cycle = 6,
-
- .mode = AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_DBW_8,
- .tdf_cycles = 2,
-};
-
-static void __init neocore926_add_device_nand(void)
-{
- /* configure chip-select 3 (NAND) */
- sam9_smc_configure(0, 3, &neocore926_nand_smc_config);
-
- at91_add_device_nand(&neocore926_nand_data);
-}
-
-
-/*
- * LCD Controller
- */
-#if defined(CONFIG_FB_ATMEL) || defined(CONFIG_FB_ATMEL_MODULE)
-static struct fb_videomode at91_tft_vga_modes[] = {
- {
- .name = "TX09D50VM1CCA @ 60",
- .refresh = 60,
- .xres = 240, .yres = 320,
- .pixclock = KHZ2PICOS(5000),
-
- .left_margin = 1, .right_margin = 33,
- .upper_margin = 1, .lower_margin = 0,
- .hsync_len = 5, .vsync_len = 1,
-
- .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
- .vmode = FB_VMODE_NONINTERLACED,
- },
-};
-
-static struct fb_monspecs at91fb_default_monspecs = {
- .manufacturer = "HIT",
- .monitor = "TX09D70VM1CCA",
-
- .modedb = at91_tft_vga_modes,
- .modedb_len = ARRAY_SIZE(at91_tft_vga_modes),
- .hfmin = 15000,
- .hfmax = 64000,
- .vfmin = 50,
- .vfmax = 150,
-};
-
-#define AT91SAM9263_DEFAULT_LCDCON2 (ATMEL_LCDC_MEMOR_LITTLE \
- | ATMEL_LCDC_DISTYPE_TFT \
- | ATMEL_LCDC_CLKMOD_ALWAYSACTIVE)
-
-static void at91_lcdc_power_control(int on)
-{
- at91_set_gpio_value(AT91_PIN_PA30, on);
-}
-
-/* Driver datas */
-static struct atmel_lcdfb_info __initdata neocore926_lcdc_data = {
- .lcdcon_is_backlight = true,
- .default_bpp = 16,
- .default_dmacon = ATMEL_LCDC_DMAEN,
- .default_lcdcon2 = AT91SAM9263_DEFAULT_LCDCON2,
- .default_monspecs = &at91fb_default_monspecs,
- .atmel_lcdfb_power_control = at91_lcdc_power_control,
- .guard_time = 1,
- .lcd_wiring_mode = ATMEL_LCDC_WIRING_RGB555,
-};
-
-#else
-static struct atmel_lcdfb_info __initdata neocore926_lcdc_data;
-#endif
-
-
-/*
- * GPIO Buttons
- */
-#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
-static struct gpio_keys_button neocore926_buttons[] = {
- { /* BP1, "leftclic" */
- .code = BTN_LEFT,
- .gpio = AT91_PIN_PC5,
- .active_low = 1,
- .desc = "left_click",
- .wakeup = 1,
- },
- { /* BP2, "rightclic" */
- .code = BTN_RIGHT,
- .gpio = AT91_PIN_PC4,
- .active_low = 1,
- .desc = "right_click",
- .wakeup = 1,
- },
-};
-
-static struct gpio_keys_platform_data neocore926_button_data = {
- .buttons = neocore926_buttons,
- .nbuttons = ARRAY_SIZE(neocore926_buttons),
-};
-
-static struct platform_device neocore926_button_device = {
- .name = "gpio-keys",
- .id = -1,
- .num_resources = 0,
- .dev = {
- .platform_data = &neocore926_button_data,
- }
-};
-
-static void __init neocore926_add_device_buttons(void)
-{
- at91_set_GPIO_periph(AT91_PIN_PC5, 0); /* left button */
- at91_set_deglitch(AT91_PIN_PC5, 1);
- at91_set_GPIO_periph(AT91_PIN_PC4, 0); /* right button */
- at91_set_deglitch(AT91_PIN_PC4, 1);
-
- platform_device_register(&neocore926_button_device);
-}
-#else
-static void __init neocore926_add_device_buttons(void) {}
-#endif
-
-
-/*
- * AC97
- */
-static struct ac97c_platform_data neocore926_ac97_data = {
- .reset_pin = AT91_PIN_PA13,
-};
-
-
-static void __init neocore926_board_init(void)
-{
- /* Serial */
- /* DBGU on ttyS0. (Rx & Tx only) */
- at91_register_uart(0, 0, 0);
-
- /* USART0 on ttyS1. (Rx, Tx, RTS, CTS) */
- at91_register_uart(AT91SAM9263_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS);
- at91_add_device_serial();
-
- /* USB Host */
- at91_add_device_usbh(&neocore926_usbh_data);
-
- /* USB Device */
- at91_add_device_udc(&neocore926_udc_data);
-
- /* SPI */
- at91_set_gpio_output(AT91_PIN_PE20, 1); /* select spi0 clock */
- at91_add_device_spi(neocore926_spi_devices, ARRAY_SIZE(neocore926_spi_devices));
-
- /* Touchscreen */
- neocore926_add_device_ts();
-
- /* MMC */
- at91_add_device_mci(0, &neocore926_mci0_data);
-
- /* Ethernet */
- at91_add_device_eth(&neocore926_macb_data);
-
- /* NAND */
- neocore926_add_device_nand();
-
- /* I2C */
- at91_add_device_i2c(NULL, 0);
-
- /* LCD Controller */
- at91_add_device_lcdc(&neocore926_lcdc_data);
-
- /* Push Buttons */
- neocore926_add_device_buttons();
-
- /* AC97 */
- at91_add_device_ac97(&neocore926_ac97_data);
-}
-
-MACHINE_START(NEOCORE926, "ADENEO NEOCORE 926")
- /* Maintainer: ADENEO */
- .timer = &at91sam926x_timer,
- .map_io = at91_map_io,
- .handle_irq = at91_aic_handle_irq,
- .init_early = neocore926_init_early,
- .init_irq = at91_init_irq_default,
- .init_machine = neocore926_board_init,
-MACHINE_END
diff --git a/arch/arm/mach-at91/board-pcontrol-g20.c b/arch/arm/mach-at91/board-pcontrol-g20.c
index 0299554..65c0d6b 100644
--- a/arch/arm/mach-at91/board-pcontrol-g20.c
+++ b/arch/arm/mach-at91/board-pcontrol-g20.c
@@ -217,7 +217,7 @@
MACHINE_START(PCONTROL_G20, "PControl G20")
/* Maintainer: pgsellmann@portner-elektronik.at */
- .timer = &at91sam926x_timer,
+ .init_time = at91sam926x_pit_init,
.map_io = at91_map_io,
.handle_irq = at91_aic_handle_irq,
.init_early = pcontrol_g20_init_early,
diff --git a/arch/arm/mach-at91/board-picotux200.c b/arch/arm/mach-at91/board-picotux200.c
index 4938f1c..ab2b2ec 100644
--- a/arch/arm/mach-at91/board-picotux200.c
+++ b/arch/arm/mach-at91/board-picotux200.c
@@ -119,7 +119,7 @@
MACHINE_START(PICOTUX2XX, "picotux 200")
/* Maintainer: Kleinhenz Elektronik GmbH */
- .timer = &at91rm9200_timer,
+ .init_time = at91rm9200_timer_init,
.map_io = at91_map_io,
.handle_irq = at91_aic_handle_irq,
.init_early = picotux200_init_early,
diff --git a/arch/arm/mach-at91/board-qil-a9260.c b/arch/arm/mach-at91/board-qil-a9260.c
index 33b1628..aa3bc9b 100644
--- a/arch/arm/mach-at91/board-qil-a9260.c
+++ b/arch/arm/mach-at91/board-qil-a9260.c
@@ -257,7 +257,7 @@
MACHINE_START(QIL_A9260, "CALAO QIL_A9260")
/* Maintainer: calao-systems */
- .timer = &at91sam926x_timer,
+ .init_time = at91sam926x_pit_init,
.map_io = at91_map_io,
.handle_irq = at91_aic_handle_irq,
.init_early = ek_init_early,
diff --git a/arch/arm/mach-at91/board-rm9200-dt.c b/arch/arm/mach-at91/board-rm9200-dt.c
index 5f9ce3d..3fcb662 100644
--- a/arch/arm/mach-at91/board-rm9200-dt.c
+++ b/arch/arm/mach-at91/board-rm9200-dt.c
@@ -47,7 +47,7 @@
};
DT_MACHINE_START(at91rm9200_dt, "Atmel AT91RM9200 (Device Tree)")
- .timer = &at91rm9200_timer,
+ .init_time = at91rm9200_timer_init,
.map_io = at91_map_io,
.handle_irq = at91_aic_handle_irq,
.init_early = at91rm9200_dt_initialize,
diff --git a/arch/arm/mach-at91/board-rm9200dk.c b/arch/arm/mach-at91/board-rm9200dk.c
index 9e5061b..690541b 100644
--- a/arch/arm/mach-at91/board-rm9200dk.c
+++ b/arch/arm/mach-at91/board-rm9200dk.c
@@ -219,7 +219,7 @@
MACHINE_START(AT91RM9200DK, "Atmel AT91RM9200-DK")
/* Maintainer: SAN People/Atmel */
- .timer = &at91rm9200_timer,
+ .init_time = at91rm9200_timer_init,
.map_io = at91_map_io,
.handle_irq = at91_aic_handle_irq,
.init_early = dk_init_early,
diff --git a/arch/arm/mach-at91/board-rm9200ek.c b/arch/arm/mach-at91/board-rm9200ek.c
index 58277db..8b17dad 100644
--- a/arch/arm/mach-at91/board-rm9200ek.c
+++ b/arch/arm/mach-at91/board-rm9200ek.c
@@ -186,7 +186,7 @@
MACHINE_START(AT91RM9200EK, "Atmel AT91RM9200-EK")
/* Maintainer: SAN People/Atmel */
- .timer = &at91rm9200_timer,
+ .init_time = at91rm9200_timer_init,
.map_io = at91_map_io,
.handle_irq = at91_aic_handle_irq,
.init_early = ek_init_early,
diff --git a/arch/arm/mach-at91/board-rsi-ews.c b/arch/arm/mach-at91/board-rsi-ews.c
index 2e8b833..f6d7f19 100644
--- a/arch/arm/mach-at91/board-rsi-ews.c
+++ b/arch/arm/mach-at91/board-rsi-ews.c
@@ -222,7 +222,7 @@
MACHINE_START(RSI_EWS, "RSI EWS")
/* Maintainer: Josef Holzmayr <holzmayr@rsi-elektrotechnik.de> */
- .timer = &at91rm9200_timer,
+ .init_time = at91rm9200_timer_init,
.map_io = at91_map_io,
.handle_irq = at91_aic_handle_irq,
.init_early = rsi_ews_init_early,
diff --git a/arch/arm/mach-at91/board-sam9-l9260.c b/arch/arm/mach-at91/board-sam9-l9260.c
index b75fbf6..43ee4dc 100644
--- a/arch/arm/mach-at91/board-sam9-l9260.c
+++ b/arch/arm/mach-at91/board-sam9-l9260.c
@@ -218,7 +218,7 @@
MACHINE_START(SAM9_L9260, "Olimex SAM9-L9260")
/* Maintainer: Olimex */
- .timer = &at91sam926x_timer,
+ .init_time = at91sam926x_pit_init,
.map_io = at91_map_io,
.handle_irq = at91_aic_handle_irq,
.init_early = ek_init_early,
diff --git a/arch/arm/mach-at91/board-sam9260ek.c b/arch/arm/mach-at91/board-sam9260ek.c
index f0135cd..0b153c8 100644
--- a/arch/arm/mach-at91/board-sam9260ek.c
+++ b/arch/arm/mach-at91/board-sam9260ek.c
@@ -343,7 +343,7 @@
MACHINE_START(AT91SAM9260EK, "Atmel AT91SAM9260-EK")
/* Maintainer: Atmel */
- .timer = &at91sam926x_timer,
+ .init_time = at91sam926x_pit_init,
.map_io = at91_map_io,
.handle_irq = at91_aic_handle_irq,
.init_early = ek_init_early,
diff --git a/arch/arm/mach-at91/board-sam9261ek.c b/arch/arm/mach-at91/board-sam9261ek.c
index 13ebaa8..b446645 100644
--- a/arch/arm/mach-at91/board-sam9261ek.c
+++ b/arch/arm/mach-at91/board-sam9261ek.c
@@ -612,7 +612,7 @@
MACHINE_START(AT91SAM9G10EK, "Atmel AT91SAM9G10-EK")
#endif
/* Maintainer: Atmel */
- .timer = &at91sam926x_timer,
+ .init_time = at91sam926x_pit_init,
.map_io = at91_map_io,
.handle_irq = at91_aic_handle_irq,
.init_early = ek_init_early,
diff --git a/arch/arm/mach-at91/board-sam9263ek.c b/arch/arm/mach-at91/board-sam9263ek.c
index 89b9608..3284df0 100644
--- a/arch/arm/mach-at91/board-sam9263ek.c
+++ b/arch/arm/mach-at91/board-sam9263ek.c
@@ -443,7 +443,7 @@
MACHINE_START(AT91SAM9263EK, "Atmel AT91SAM9263-EK")
/* Maintainer: Atmel */
- .timer = &at91sam926x_timer,
+ .init_time = at91sam926x_pit_init,
.map_io = at91_map_io,
.handle_irq = at91_aic_handle_irq,
.init_early = ek_init_early,
diff --git a/arch/arm/mach-at91/board-sam9g20ek.c b/arch/arm/mach-at91/board-sam9g20ek.c
index 1b7dd9f..f9cd1f2 100644
--- a/arch/arm/mach-at91/board-sam9g20ek.c
+++ b/arch/arm/mach-at91/board-sam9g20ek.c
@@ -409,7 +409,7 @@
MACHINE_START(AT91SAM9G20EK, "Atmel AT91SAM9G20-EK")
/* Maintainer: Atmel */
- .timer = &at91sam926x_timer,
+ .init_time = at91sam926x_pit_init,
.map_io = at91_map_io,
.handle_irq = at91_aic_handle_irq,
.init_early = ek_init_early,
@@ -419,7 +419,7 @@
MACHINE_START(AT91SAM9G20EK_2MMC, "Atmel AT91SAM9G20-EK 2 MMC Slot Mod")
/* Maintainer: Atmel */
- .timer = &at91sam926x_timer,
+ .init_time = at91sam926x_pit_init,
.map_io = at91_map_io,
.handle_irq = at91_aic_handle_irq,
.init_early = ek_init_early,
diff --git a/arch/arm/mach-at91/board-sam9m10g45ek.c b/arch/arm/mach-at91/board-sam9m10g45ek.c
index e4cc375..2a94896 100644
--- a/arch/arm/mach-at91/board-sam9m10g45ek.c
+++ b/arch/arm/mach-at91/board-sam9m10g45ek.c
@@ -502,7 +502,7 @@
MACHINE_START(AT91SAM9M10G45EK, "Atmel AT91SAM9M10G45-EK")
/* Maintainer: Atmel */
- .timer = &at91sam926x_timer,
+ .init_time = at91sam926x_pit_init,
.map_io = at91_map_io,
.handle_irq = at91_aic_handle_irq,
.init_early = ek_init_early,
diff --git a/arch/arm/mach-at91/board-sam9rlek.c b/arch/arm/mach-at91/board-sam9rlek.c
index 377a109..aa265dc 100644
--- a/arch/arm/mach-at91/board-sam9rlek.c
+++ b/arch/arm/mach-at91/board-sam9rlek.c
@@ -320,7 +320,7 @@
MACHINE_START(AT91SAM9RLEK, "Atmel AT91SAM9RL-EK")
/* Maintainer: Atmel */
- .timer = &at91sam926x_timer,
+ .init_time = at91sam926x_pit_init,
.map_io = at91_map_io,
.handle_irq = at91_aic_handle_irq,
.init_early = ek_init_early,
diff --git a/arch/arm/mach-at91/board-snapper9260.c b/arch/arm/mach-at91/board-snapper9260.c
index 9877150..3aaa978 100644
--- a/arch/arm/mach-at91/board-snapper9260.c
+++ b/arch/arm/mach-at91/board-snapper9260.c
@@ -177,7 +177,7 @@
}
MACHINE_START(SNAPPER_9260, "Bluewater Systems Snapper 9260/9G20 module")
- .timer = &at91sam926x_timer,
+ .init_time = at91sam926x_pit_init,
.map_io = at91_map_io,
.handle_irq = at91_aic_handle_irq,
.init_early = snapper9260_init_early,
diff --git a/arch/arm/mach-at91/board-stamp9g20.c b/arch/arm/mach-at91/board-stamp9g20.c
index 48a962b..a033b8d 100644
--- a/arch/arm/mach-at91/board-stamp9g20.c
+++ b/arch/arm/mach-at91/board-stamp9g20.c
@@ -272,7 +272,7 @@
MACHINE_START(PORTUXG20, "taskit PortuxG20")
/* Maintainer: taskit GmbH */
- .timer = &at91sam926x_timer,
+ .init_time = at91sam926x_pit_init,
.map_io = at91_map_io,
.handle_irq = at91_aic_handle_irq,
.init_early = stamp9g20_init_early,
@@ -282,7 +282,7 @@
MACHINE_START(STAMP9G20, "taskit Stamp9G20")
/* Maintainer: taskit GmbH */
- .timer = &at91sam926x_timer,
+ .init_time = at91sam926x_pit_init,
.map_io = at91_map_io,
.handle_irq = at91_aic_handle_irq,
.init_early = stamp9g20_init_early,
diff --git a/arch/arm/mach-at91/board-usb-a926x.c b/arch/arm/mach-at91/board-usb-a926x.c
index c1060f9..2487d94 100644
--- a/arch/arm/mach-at91/board-usb-a926x.c
+++ b/arch/arm/mach-at91/board-usb-a926x.c
@@ -355,7 +355,7 @@
MACHINE_START(USB_A9263, "CALAO USB_A9263")
/* Maintainer: calao-systems */
- .timer = &at91sam926x_timer,
+ .init_time = at91sam926x_pit_init,
.map_io = at91_map_io,
.handle_irq = at91_aic_handle_irq,
.init_early = ek_init_early,
@@ -365,7 +365,7 @@
MACHINE_START(USB_A9260, "CALAO USB_A9260")
/* Maintainer: calao-systems */
- .timer = &at91sam926x_timer,
+ .init_time = at91sam926x_pit_init,
.map_io = at91_map_io,
.handle_irq = at91_aic_handle_irq,
.init_early = ek_init_early,
@@ -375,7 +375,7 @@
MACHINE_START(USB_A9G20, "CALAO USB_A92G0")
/* Maintainer: Jean-Christophe PLAGNIOL-VILLARD */
- .timer = &at91sam926x_timer,
+ .init_time = at91sam926x_pit_init,
.map_io = at91_map_io,
.handle_irq = at91_aic_handle_irq,
.init_early = ek_init_early,
diff --git a/arch/arm/mach-at91/board-yl-9200.c b/arch/arm/mach-at91/board-yl-9200.c
index 8673aeb..be08377 100644
--- a/arch/arm/mach-at91/board-yl-9200.c
+++ b/arch/arm/mach-at91/board-yl-9200.c
@@ -587,7 +587,7 @@
MACHINE_START(YL9200, "uCdragon YL-9200")
/* Maintainer: S.Birtles */
- .timer = &at91rm9200_timer,
+ .init_time = at91rm9200_timer_init,
.map_io = at91_map_io,
.handle_irq = at91_aic_handle_irq,
.init_early = yl9200_init_early,
diff --git a/arch/arm/mach-at91/generic.h b/arch/arm/mach-at91/generic.h
index fc593d6..78ab065 100644
--- a/arch/arm/mach-at91/generic.h
+++ b/arch/arm/mach-at91/generic.h
@@ -36,12 +36,11 @@
/* Timer */
-struct sys_timer;
extern void at91rm9200_ioremap_st(u32 addr);
-extern struct sys_timer at91rm9200_timer;
+extern void at91rm9200_timer_init(void);
extern void at91sam926x_ioremap_pit(u32 addr);
-extern struct sys_timer at91sam926x_timer;
-extern struct sys_timer at91x40_timer;
+extern void at91sam926x_pit_init(void);
+extern void at91x40_timer_init(void);
/* Clocks */
#ifdef CONFIG_AT91_PMC_UNIT
diff --git a/arch/arm/mach-at91/include/mach/uncompress.h b/arch/arm/mach-at91/include/mach/uncompress.h
index 97ad68a..5659f7c 100644
--- a/arch/arm/mach-at91/include/mach/uncompress.h
+++ b/arch/arm/mach-at91/include/mach/uncompress.h
@@ -196,6 +196,4 @@
barrier();
}
-#define arch_decomp_wdog()
-
#endif
diff --git a/arch/arm/mach-bcm/Kconfig b/arch/arm/mach-bcm/Kconfig
index 48705c1..bf02471 100644
--- a/arch/arm/mach-bcm/Kconfig
+++ b/arch/arm/mach-bcm/Kconfig
@@ -7,7 +7,6 @@
select ARM_GIC
select CPU_V7
select GENERIC_CLOCKEVENTS
- select GENERIC_GPIO
select GENERIC_TIME
select GPIO_BCM
select SPARSE_IRQ
diff --git a/arch/arm/mach-bcm/board_bcm.c b/arch/arm/mach-bcm/board_bcm.c
index 3a62f1b..f0f9aba 100644
--- a/arch/arm/mach-bcm/board_bcm.c
+++ b/arch/arm/mach-bcm/board_bcm.c
@@ -11,34 +11,19 @@
* GNU General Public License for more details.
*/
-#include <linux/of_irq.h>
#include <linux/of_platform.h>
#include <linux/init.h>
#include <linux/device.h>
#include <linux/platform_device.h>
+#include <linux/irqchip.h>
#include <asm/mach/arch.h>
-#include <asm/hardware/gic.h>
-
#include <asm/mach/time.h>
-static const struct of_device_id irq_match[] = {
- {.compatible = "arm,cortex-a9-gic", .data = gic_of_init, },
- {}
-};
-
static void timer_init(void)
{
}
-static struct sys_timer timer = {
- .init = timer_init,
-};
-
-static void __init init_irq(void)
-{
- of_irq_init(irq_match);
-}
static void __init board_init(void)
{
@@ -49,9 +34,8 @@
static const char * const bcm11351_dt_compat[] = { "bcm,bcm11351", NULL, };
DT_MACHINE_START(BCM11351_DT, "Broadcom Application Processor")
- .init_irq = init_irq,
- .timer = &timer,
+ .init_irq = irqchip_init,
+ .init_time = timer_init,
.init_machine = board_init,
.dt_compat = bcm11351_dt_compat,
- .handle_irq = gic_handle_irq,
MACHINE_END
diff --git a/arch/arm/mach-bcm2835/bcm2835.c b/arch/arm/mach-bcm2835/bcm2835.c
index f0d739f..d615a61 100644
--- a/arch/arm/mach-bcm2835/bcm2835.c
+++ b/arch/arm/mach-bcm2835/bcm2835.c
@@ -17,8 +17,8 @@
#include <linux/irqchip/bcm2835.h>
#include <linux/of_address.h>
#include <linux/of_platform.h>
-#include <linux/bcm2835_timer.h>
#include <linux/clk/bcm2835.h>
+#include <linux/clocksource.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
@@ -104,7 +104,7 @@
.init_irq = bcm2835_init_irq,
.handle_irq = bcm2835_handle_irq,
.init_machine = bcm2835_init,
- .timer = &bcm2835_timer,
+ .init_time = clocksource_of_init,
.restart = bcm2835_restart,
.dt_compat = bcm2835_compat
MACHINE_END
diff --git a/arch/arm/mach-bcm2835/include/mach/uncompress.h b/arch/arm/mach-bcm2835/include/mach/uncompress.h
index cc46dcc..bf86dca 100644
--- a/arch/arm/mach-bcm2835/include/mach/uncompress.h
+++ b/arch/arm/mach-bcm2835/include/mach/uncompress.h
@@ -42,4 +42,3 @@
}
#define arch_decomp_setup()
-#define arch_decomp_wdog()
diff --git a/arch/arm/mach-clps711x/board-autcpu12.c b/arch/arm/mach-clps711x/board-autcpu12.c
index 3fbf43f..f385847 100644
--- a/arch/arm/mach-clps711x/board-autcpu12.c
+++ b/arch/arm/mach-clps711x/board-autcpu12.c
@@ -170,7 +170,7 @@
.nr_irqs = CLPS711X_NR_IRQS,
.map_io = clps711x_map_io,
.init_irq = clps711x_init_irq,
- .timer = &clps711x_timer,
+ .init_time = clps711x_timer_init,
.init_machine = autcpu12_init,
.init_late = autcpu12_init_late,
.handle_irq = clps711x_handle_irq,
diff --git a/arch/arm/mach-clps711x/board-cdb89712.c b/arch/arm/mach-clps711x/board-cdb89712.c
index 60900dd..baab7da 100644
--- a/arch/arm/mach-clps711x/board-cdb89712.c
+++ b/arch/arm/mach-clps711x/board-cdb89712.c
@@ -140,7 +140,7 @@
.nr_irqs = CLPS711X_NR_IRQS,
.map_io = clps711x_map_io,
.init_irq = clps711x_init_irq,
- .timer = &clps711x_timer,
+ .init_time = clps711x_timer_init,
.init_machine = cdb89712_init,
.handle_irq = clps711x_handle_irq,
.restart = clps711x_restart,
diff --git a/arch/arm/mach-clps711x/board-clep7312.c b/arch/arm/mach-clps711x/board-clep7312.c
index 0b32a48..014aa3c 100644
--- a/arch/arm/mach-clps711x/board-clep7312.c
+++ b/arch/arm/mach-clps711x/board-clep7312.c
@@ -40,7 +40,7 @@
.fixup = fixup_clep7312,
.map_io = clps711x_map_io,
.init_irq = clps711x_init_irq,
- .timer = &clps711x_timer,
+ .init_time = clps711x_timer_init,
.handle_irq = clps711x_handle_irq,
.restart = clps711x_restart,
MACHINE_END
diff --git a/arch/arm/mach-clps711x/board-edb7211.c b/arch/arm/mach-clps711x/board-edb7211.c
index 71aa5cf..5f928e9 100644
--- a/arch/arm/mach-clps711x/board-edb7211.c
+++ b/arch/arm/mach-clps711x/board-edb7211.c
@@ -173,7 +173,7 @@
.reserve = edb7211_reserve,
.map_io = edb7211_map_io,
.init_irq = clps711x_init_irq,
- .timer = &clps711x_timer,
+ .init_time = clps711x_timer_init,
.init_machine = edb7211_init,
.handle_irq = clps711x_handle_irq,
.restart = clps711x_restart,
diff --git a/arch/arm/mach-clps711x/board-fortunet.c b/arch/arm/mach-clps711x/board-fortunet.c
index 7d01255..c5675ef 100644
--- a/arch/arm/mach-clps711x/board-fortunet.c
+++ b/arch/arm/mach-clps711x/board-fortunet.c
@@ -78,7 +78,7 @@
.fixup = fortunet_fixup,
.map_io = clps711x_map_io,
.init_irq = clps711x_init_irq,
- .timer = &clps711x_timer,
+ .init_time = clps711x_timer_init,
.handle_irq = clps711x_handle_irq,
.restart = clps711x_restart,
MACHINE_END
diff --git a/arch/arm/mach-clps711x/board-p720t.c b/arch/arm/mach-clps711x/board-p720t.c
index 1518fc8..8d3ee67 100644
--- a/arch/arm/mach-clps711x/board-p720t.c
+++ b/arch/arm/mach-clps711x/board-p720t.c
@@ -224,7 +224,7 @@
.map_io = p720t_map_io,
.init_early = p720t_init_early,
.init_irq = clps711x_init_irq,
- .timer = &clps711x_timer,
+ .init_time = clps711x_timer_init,
.init_machine = p720t_init,
.init_late = p720t_init_late,
.handle_irq = clps711x_handle_irq,
diff --git a/arch/arm/mach-clps711x/common.c b/arch/arm/mach-clps711x/common.c
index e046439..20ff50f 100644
--- a/arch/arm/mach-clps711x/common.c
+++ b/arch/arm/mach-clps711x/common.c
@@ -282,7 +282,7 @@
clk_register_clkdev(clk, name, NULL);
}
-static void __init clps711x_timer_init(void)
+void __init clps711x_timer_init(void)
{
int osc, ext, pll, cpu, bus, timl, timh, uart, spi;
u32 tmp;
@@ -345,10 +345,6 @@
setup_irq(IRQ_TC2OI, &clps711x_timer_irq);
}
-struct sys_timer clps711x_timer = {
- .init = clps711x_timer_init,
-};
-
void clps711x_restart(char mode, const char *cmd)
{
soft_restart(0);
diff --git a/arch/arm/mach-clps711x/common.h b/arch/arm/mach-clps711x/common.h
index b7c0c75..f84a729 100644
--- a/arch/arm/mach-clps711x/common.h
+++ b/arch/arm/mach-clps711x/common.h
@@ -8,10 +8,8 @@
#define CLPS711X_NR_GPIO (4 * 8 + 3)
#define CLPS711X_GPIO(prt, bit) ((prt) * 8 + (bit))
-struct sys_timer;
-
extern void clps711x_map_io(void);
extern void clps711x_init_irq(void);
+extern void clps711x_timer_init(void);
extern void clps711x_handle_irq(struct pt_regs *regs);
extern void clps711x_restart(char mode, const char *cmd);
-extern struct sys_timer clps711x_timer;
diff --git a/arch/arm/mach-clps711x/include/mach/uncompress.h b/arch/arm/mach-clps711x/include/mach/uncompress.h
index 7b28d6a..5f02d06 100644
--- a/arch/arm/mach-clps711x/include/mach/uncompress.h
+++ b/arch/arm/mach-clps711x/include/mach/uncompress.h
@@ -53,5 +53,3 @@
* nothing to do
*/
#define arch_decomp_setup()
-
-#define arch_decomp_wdog()
diff --git a/arch/arm/mach-cns3xxx/cns3420vb.c b/arch/arm/mach-cns3xxx/cns3420vb.c
index ae30539..a71867e 100644
--- a/arch/arm/mach-cns3xxx/cns3420vb.c
+++ b/arch/arm/mach-cns3xxx/cns3420vb.c
@@ -28,7 +28,6 @@
#include <linux/usb/ohci_pdriver.h>
#include <asm/setup.h>
#include <asm/mach-types.h>
-#include <asm/hardware/gic.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/mach/time.h>
@@ -250,8 +249,7 @@
.atag_offset = 0x100,
.map_io = cns3420_map_io,
.init_irq = cns3xxx_init_irq,
- .timer = &cns3xxx_timer,
- .handle_irq = gic_handle_irq,
+ .init_time = cns3xxx_timer_init,
.init_machine = cns3420_init,
.restart = cns3xxx_restart,
MACHINE_END
diff --git a/arch/arm/mach-cns3xxx/core.c b/arch/arm/mach-cns3xxx/core.c
index 031805b..e698f26 100644
--- a/arch/arm/mach-cns3xxx/core.c
+++ b/arch/arm/mach-cns3xxx/core.c
@@ -12,10 +12,10 @@
#include <linux/interrupt.h>
#include <linux/clockchips.h>
#include <linux/io.h>
+#include <linux/irqchip/arm-gic.h>
#include <asm/mach/map.h>
#include <asm/mach/time.h>
#include <asm/mach/irq.h>
-#include <asm/hardware/gic.h>
#include <asm/hardware/cache-l2x0.h>
#include <mach/cns3xxx.h>
#include "core.h"
@@ -134,7 +134,6 @@
static struct clock_event_device cns3xxx_tmr1_clockevent = {
.name = "cns3xxx timer1",
- .shift = 8,
.features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
.set_mode = cns3xxx_timer_set_mode,
.set_next_event = cns3xxx_timer_set_next_event,
@@ -145,15 +144,9 @@
static void __init cns3xxx_clockevents_init(unsigned int timer_irq)
{
cns3xxx_tmr1_clockevent.irq = timer_irq;
- cns3xxx_tmr1_clockevent.mult =
- div_sc((cns3xxx_cpu_clock() >> 3) * 1000000, NSEC_PER_SEC,
- cns3xxx_tmr1_clockevent.shift);
- cns3xxx_tmr1_clockevent.max_delta_ns =
- clockevent_delta2ns(0xffffffff, &cns3xxx_tmr1_clockevent);
- cns3xxx_tmr1_clockevent.min_delta_ns =
- clockevent_delta2ns(0xf, &cns3xxx_tmr1_clockevent);
-
- clockevents_register_device(&cns3xxx_tmr1_clockevent);
+ clockevents_config_and_register(&cns3xxx_tmr1_clockevent,
+ (cns3xxx_cpu_clock() >> 3) * 1000000,
+ 0xf, 0xffffffff);
}
/*
@@ -235,17 +228,13 @@
cns3xxx_clockevents_init(timer_irq);
}
-static void __init cns3xxx_timer_init(void)
+void __init cns3xxx_timer_init(void)
{
cns3xxx_tmr1 = IOMEM(CNS3XXX_TIMER1_2_3_BASE_VIRT);
__cns3xxx_timer_init(IRQ_CNS3XXX_TIMER0);
}
-struct sys_timer cns3xxx_timer = {
- .init = cns3xxx_timer_init,
-};
-
#ifdef CONFIG_CACHE_L2X0
void __init cns3xxx_l2x0_init(void)
diff --git a/arch/arm/mach-cns3xxx/core.h b/arch/arm/mach-cns3xxx/core.h
index 4894b8c..b23b17b 100644
--- a/arch/arm/mach-cns3xxx/core.h
+++ b/arch/arm/mach-cns3xxx/core.h
@@ -11,7 +11,7 @@
#ifndef __CNS3XXX_CORE_H
#define __CNS3XXX_CORE_H
-extern struct sys_timer cns3xxx_timer;
+extern void cns3xxx_timer_init(void);
#ifdef CONFIG_CACHE_L2X0
void __init cns3xxx_l2x0_init(void);
diff --git a/arch/arm/mach-cns3xxx/include/mach/uncompress.h b/arch/arm/mach-cns3xxx/include/mach/uncompress.h
index a91b605..7a030b9 100644
--- a/arch/arm/mach-cns3xxx/include/mach/uncompress.h
+++ b/arch/arm/mach-cns3xxx/include/mach/uncompress.h
@@ -51,4 +51,3 @@
* nothing to do
*/
#define arch_decomp_setup()
-#define arch_decomp_wdog()
diff --git a/arch/arm/mach-davinci/board-da830-evm.c b/arch/arm/mach-davinci/board-da830-evm.c
index 95b5e10..e374271 100644
--- a/arch/arm/mach-davinci/board-da830-evm.c
+++ b/arch/arm/mach-davinci/board-da830-evm.c
@@ -679,7 +679,7 @@
.atag_offset = 0x100,
.map_io = da830_evm_map_io,
.init_irq = cp_intc_init,
- .timer = &davinci_timer,
+ .init_time = davinci_timer_init,
.init_machine = da830_evm_init,
.init_late = davinci_init_late,
.dma_zone_size = SZ_128M,
diff --git a/arch/arm/mach-davinci/board-da850-evm.c b/arch/arm/mach-davinci/board-da850-evm.c
index 0299915..3b33560 100644
--- a/arch/arm/mach-davinci/board-da850-evm.c
+++ b/arch/arm/mach-davinci/board-da850-evm.c
@@ -1599,7 +1599,7 @@
.atag_offset = 0x100,
.map_io = da850_evm_map_io,
.init_irq = cp_intc_init,
- .timer = &davinci_timer,
+ .init_time = davinci_timer_init,
.init_machine = da850_evm_init,
.init_late = davinci_init_late,
.dma_zone_size = SZ_128M,
diff --git a/arch/arm/mach-davinci/board-dm355-evm.c b/arch/arm/mach-davinci/board-dm355-evm.c
index cdf8d07..147b8e1 100644
--- a/arch/arm/mach-davinci/board-dm355-evm.c
+++ b/arch/arm/mach-davinci/board-dm355-evm.c
@@ -355,7 +355,7 @@
.atag_offset = 0x100,
.map_io = dm355_evm_map_io,
.init_irq = davinci_irq_init,
- .timer = &davinci_timer,
+ .init_time = davinci_timer_init,
.init_machine = dm355_evm_init,
.init_late = davinci_init_late,
.dma_zone_size = SZ_128M,
diff --git a/arch/arm/mach-davinci/board-dm355-leopard.c b/arch/arm/mach-davinci/board-dm355-leopard.c
index d419545..dff4ddc 100644
--- a/arch/arm/mach-davinci/board-dm355-leopard.c
+++ b/arch/arm/mach-davinci/board-dm355-leopard.c
@@ -274,7 +274,7 @@
.atag_offset = 0x100,
.map_io = dm355_leopard_map_io,
.init_irq = davinci_irq_init,
- .timer = &davinci_timer,
+ .init_time = davinci_timer_init,
.init_machine = dm355_leopard_init,
.init_late = davinci_init_late,
.dma_zone_size = SZ_128M,
diff --git a/arch/arm/mach-davinci/board-dm365-evm.c b/arch/arm/mach-davinci/board-dm365-evm.c
index 5d49c75..c2d4958 100644
--- a/arch/arm/mach-davinci/board-dm365-evm.c
+++ b/arch/arm/mach-davinci/board-dm365-evm.c
@@ -616,7 +616,7 @@
.atag_offset = 0x100,
.map_io = dm365_evm_map_io,
.init_irq = davinci_irq_init,
- .timer = &davinci_timer,
+ .init_time = davinci_timer_init,
.init_machine = dm365_evm_init,
.init_late = davinci_init_late,
.dma_zone_size = SZ_128M,
diff --git a/arch/arm/mach-davinci/board-dm644x-evm.c b/arch/arm/mach-davinci/board-dm644x-evm.c
index f5e018d..e4a16f9 100644
--- a/arch/arm/mach-davinci/board-dm644x-evm.c
+++ b/arch/arm/mach-davinci/board-dm644x-evm.c
@@ -825,7 +825,7 @@
.atag_offset = 0x100,
.map_io = davinci_evm_map_io,
.init_irq = davinci_irq_init,
- .timer = &davinci_timer,
+ .init_time = davinci_timer_init,
.init_machine = davinci_evm_init,
.init_late = davinci_init_late,
.dma_zone_size = SZ_128M,
diff --git a/arch/arm/mach-davinci/board-dm646x-evm.c b/arch/arm/mach-davinci/board-dm646x-evm.c
index 6e2f163..de7adff 100644
--- a/arch/arm/mach-davinci/board-dm646x-evm.c
+++ b/arch/arm/mach-davinci/board-dm646x-evm.c
@@ -818,7 +818,7 @@
.atag_offset = 0x100,
.map_io = davinci_map_io,
.init_irq = davinci_irq_init,
- .timer = &davinci_timer,
+ .init_time = davinci_timer_init,
.init_machine = evm_init,
.init_late = davinci_init_late,
.dma_zone_size = SZ_128M,
@@ -829,7 +829,7 @@
.atag_offset = 0x100,
.map_io = davinci_map_io,
.init_irq = davinci_irq_init,
- .timer = &davinci_timer,
+ .init_time = davinci_timer_init,
.init_machine = evm_init,
.init_late = davinci_init_late,
.dma_zone_size = SZ_128M,
diff --git a/arch/arm/mach-davinci/board-mityomapl138.c b/arch/arm/mach-davinci/board-mityomapl138.c
index 43e4a0d..b0df578 100644
--- a/arch/arm/mach-davinci/board-mityomapl138.c
+++ b/arch/arm/mach-davinci/board-mityomapl138.c
@@ -570,7 +570,7 @@
.atag_offset = 0x100,
.map_io = mityomapl138_map_io,
.init_irq = cp_intc_init,
- .timer = &davinci_timer,
+ .init_time = davinci_timer_init,
.init_machine = mityomapl138_init,
.init_late = davinci_init_late,
.dma_zone_size = SZ_128M,
diff --git a/arch/arm/mach-davinci/board-neuros-osd2.c b/arch/arm/mach-davinci/board-neuros-osd2.c
index 3e3e3af..1c98107 100644
--- a/arch/arm/mach-davinci/board-neuros-osd2.c
+++ b/arch/arm/mach-davinci/board-neuros-osd2.c
@@ -237,7 +237,7 @@
.atag_offset = 0x100,
.map_io = davinci_ntosd2_map_io,
.init_irq = davinci_irq_init,
- .timer = &davinci_timer,
+ .init_time = davinci_timer_init,
.init_machine = davinci_ntosd2_init,
.init_late = davinci_init_late,
.dma_zone_size = SZ_128M,
diff --git a/arch/arm/mach-davinci/board-omapl138-hawk.c b/arch/arm/mach-davinci/board-omapl138-hawk.c
index dc1208e..deb3922 100644
--- a/arch/arm/mach-davinci/board-omapl138-hawk.c
+++ b/arch/arm/mach-davinci/board-omapl138-hawk.c
@@ -341,7 +341,7 @@
.atag_offset = 0x100,
.map_io = omapl138_hawk_map_io,
.init_irq = cp_intc_init,
- .timer = &davinci_timer,
+ .init_time = davinci_timer_init,
.init_machine = omapl138_hawk_init,
.init_late = davinci_init_late,
.dma_zone_size = SZ_128M,
diff --git a/arch/arm/mach-davinci/board-sffsdr.c b/arch/arm/mach-davinci/board-sffsdr.c
index 6957787..739be7e 100644
--- a/arch/arm/mach-davinci/board-sffsdr.c
+++ b/arch/arm/mach-davinci/board-sffsdr.c
@@ -155,7 +155,7 @@
.atag_offset = 0x100,
.map_io = davinci_sffsdr_map_io,
.init_irq = davinci_irq_init,
- .timer = &davinci_timer,
+ .init_time = davinci_timer_init,
.init_machine = davinci_sffsdr_init,
.init_late = davinci_init_late,
.dma_zone_size = SZ_128M,
diff --git a/arch/arm/mach-davinci/board-tnetv107x-evm.c b/arch/arm/mach-davinci/board-tnetv107x-evm.c
index be30997..4f41602 100644
--- a/arch/arm/mach-davinci/board-tnetv107x-evm.c
+++ b/arch/arm/mach-davinci/board-tnetv107x-evm.c
@@ -280,7 +280,7 @@
.atag_offset = 0x100,
.map_io = tnetv107x_init,
.init_irq = cp_intc_init,
- .timer = &davinci_timer,
+ .init_time = davinci_timer_init,
.init_machine = tnetv107x_evm_board_init,
.init_late = davinci_init_late,
.dma_zone_size = SZ_128M,
diff --git a/arch/arm/mach-davinci/da8xx-dt.c b/arch/arm/mach-davinci/da8xx-dt.c
index 37c27af..9a7c76e 100644
--- a/arch/arm/mach-davinci/da8xx-dt.c
+++ b/arch/arm/mach-davinci/da8xx-dt.c
@@ -56,7 +56,7 @@
DT_MACHINE_START(DA850_DT, "Generic DA850/OMAP-L138/AM18x")
.map_io = da850_init,
.init_irq = da8xx_init_irq,
- .timer = &davinci_timer,
+ .init_time = davinci_timer_init,
.init_machine = da850_init_machine,
.dt_compat = da850_boards_compat,
.init_late = davinci_init_late,
diff --git a/arch/arm/mach-davinci/include/mach/common.h b/arch/arm/mach-davinci/include/mach/common.h
index 046c723..b124b77 100644
--- a/arch/arm/mach-davinci/include/mach/common.h
+++ b/arch/arm/mach-davinci/include/mach/common.h
@@ -15,9 +15,7 @@
#include <linux/compiler.h>
#include <linux/types.h>
-struct sys_timer;
-
-extern struct sys_timer davinci_timer;
+extern void davinci_timer_init(void);
extern void davinci_irq_init(void);
extern void __iomem *davinci_intc_base;
diff --git a/arch/arm/mach-davinci/include/mach/uncompress.h b/arch/arm/mach-davinci/include/mach/uncompress.h
index 3a0ff90..f49c2916 100644
--- a/arch/arm/mach-davinci/include/mach/uncompress.h
+++ b/arch/arm/mach-davinci/include/mach/uncompress.h
@@ -101,4 +101,3 @@
}
#define arch_decomp_setup() __arch_decomp_setup(arch_id)
-#define arch_decomp_wdog()
diff --git a/arch/arm/mach-davinci/time.c b/arch/arm/mach-davinci/time.c
index 9847938..bad361e 100644
--- a/arch/arm/mach-davinci/time.c
+++ b/arch/arm/mach-davinci/time.c
@@ -337,7 +337,7 @@
};
-static void __init davinci_timer_init(void)
+void __init davinci_timer_init(void)
{
struct clk *timer_clk;
struct davinci_soc_info *soc_info = &davinci_soc_info;
@@ -410,11 +410,6 @@
timer32_config(&timers[i]);
}
-struct sys_timer davinci_timer = {
- .init = davinci_timer_init,
-};
-
-
/* reset board using watchdog timer */
void davinci_watchdog_reset(struct platform_device *pdev)
{
diff --git a/arch/arm/mach-dove/cm-a510.c b/arch/arm/mach-dove/cm-a510.c
index 792b4e2..0dc39cf 100644
--- a/arch/arm/mach-dove/cm-a510.c
+++ b/arch/arm/mach-dove/cm-a510.c
@@ -92,6 +92,6 @@
.map_io = dove_map_io,
.init_early = dove_init_early,
.init_irq = dove_init_irq,
- .timer = &dove_timer,
+ .init_time = dove_timer_init,
.restart = dove_restart,
MACHINE_END
diff --git a/arch/arm/mach-dove/common.c b/arch/arm/mach-dove/common.c
index 89f4f99..ea84c535 100644
--- a/arch/arm/mach-dove/common.c
+++ b/arch/arm/mach-dove/common.c
@@ -8,35 +8,24 @@
* warranty of any kind, whether express or implied.
*/
-#include <linux/kernel.h>
-#include <linux/delay.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/pci.h>
#include <linux/clk-provider.h>
#include <linux/clk/mvebu.h>
-#include <linux/ata_platform.h>
-#include <linux/gpio.h>
+#include <linux/dma-mapping.h>
+#include <linux/init.h>
#include <linux/of.h>
#include <linux/of_platform.h>
-#include <asm/page.h>
-#include <asm/setup.h>
-#include <asm/timex.h>
+#include <linux/platform_data/dma-mv_xor.h>
+#include <linux/platform_data/usb-ehci-orion.h>
+#include <linux/platform_device.h>
#include <asm/hardware/cache-tauros2.h>
+#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/mach/time.h>
-#include <asm/mach/pci.h>
-#include <mach/dove.h>
-#include <mach/pm.h>
#include <mach/bridge-regs.h>
-#include <asm/mach/arch.h>
-#include <linux/irq.h>
-#include <plat/time.h>
-#include <linux/platform_data/usb-ehci-orion.h>
-#include <linux/platform_data/dma-mv_xor.h>
-#include <plat/irq.h>
+#include <mach/pm.h>
#include <plat/common.h>
-#include <plat/addr-map.h>
+#include <plat/irq.h>
+#include <plat/time.h>
#include "common.h"
/*****************************************************************************
@@ -242,17 +231,13 @@
return 166666667;
}
-static void __init dove_timer_init(void)
+void __init dove_timer_init(void)
{
dove_tclk = dove_find_tclk();
orion_time_init(BRIDGE_VIRT_BASE, BRIDGE_INT_TIMER1_CLR,
IRQ_DOVE_BRIDGE, dove_tclk);
}
-struct sys_timer dove_timer = {
- .init = dove_timer_init,
-};
-
/*****************************************************************************
* Cryptographic Engines and Security Accelerator (CESA)
****************************************************************************/
@@ -454,7 +439,7 @@
.map_io = dove_map_io,
.init_early = dove_init_early,
.init_irq = orion_dt_init_irq,
- .timer = &dove_timer,
+ .init_time = dove_timer_init,
.init_machine = dove_dt_init,
.restart = dove_restart,
.dt_compat = dove_dt_board_compat,
diff --git a/arch/arm/mach-dove/common.h b/arch/arm/mach-dove/common.h
index 1a23340..ee59fba 100644
--- a/arch/arm/mach-dove/common.h
+++ b/arch/arm/mach-dove/common.h
@@ -14,7 +14,7 @@
struct mv643xx_eth_platform_data;
struct mv_sata_platform_data;
-extern struct sys_timer dove_timer;
+extern void dove_timer_init(void);
/*
* Basic Dove init functions used early by machine-setup.
diff --git a/arch/arm/mach-dove/dove-db-setup.c b/arch/arm/mach-dove/dove-db-setup.c
index bc2867f..76e26f9 100644
--- a/arch/arm/mach-dove/dove-db-setup.c
+++ b/arch/arm/mach-dove/dove-db-setup.c
@@ -98,6 +98,6 @@
.map_io = dove_map_io,
.init_early = dove_init_early,
.init_irq = dove_init_irq,
- .timer = &dove_timer,
+ .init_time = dove_timer_init,
.restart = dove_restart,
MACHINE_END
diff --git a/arch/arm/mach-dove/include/mach/uncompress.h b/arch/arm/mach-dove/include/mach/uncompress.h
index 2c5cdd7..5c8ae9b 100644
--- a/arch/arm/mach-dove/include/mach/uncompress.h
+++ b/arch/arm/mach-dove/include/mach/uncompress.h
@@ -34,4 +34,3 @@
* nothing to do
*/
#define arch_decomp_setup()
-#define arch_decomp_wdog()
diff --git a/arch/arm/mach-ebsa110/core.c b/arch/arm/mach-ebsa110/core.c
index f0fe6b5..b13cc74 100644
--- a/arch/arm/mach-ebsa110/core.c
+++ b/arch/arm/mach-ebsa110/core.c
@@ -158,7 +158,7 @@
* interrupt, then the PIT counter will roll over (ie, be negative).
* This actually works out to be convenient.
*/
-static unsigned long ebsa110_gettimeoffset(void)
+static u32 ebsa110_gettimeoffset(void)
{
unsigned long offset, count;
@@ -181,7 +181,7 @@
*/
offset = offset * (1000000 / HZ) / COUNT;
- return offset;
+ return offset * 1000;
}
static irqreturn_t
@@ -213,8 +213,10 @@
/*
* Set up timer interrupt.
*/
-static void __init ebsa110_timer_init(void)
+void __init ebsa110_timer_init(void)
{
+ arch_gettimeoffset = ebsa110_gettimeoffset;
+
/*
* Timer 1, mode 2, LSB/MSB
*/
@@ -225,11 +227,6 @@
setup_irq(IRQ_EBSA110_TIMER0, &ebsa110_timer_irq);
}
-static struct sys_timer ebsa110_timer = {
- .init = ebsa110_timer_init,
- .offset = ebsa110_gettimeoffset,
-};
-
static struct plat_serial8250_port serial_platform_data[] = {
{
.iobase = 0x3f8,
@@ -328,6 +325,6 @@
.map_io = ebsa110_map_io,
.init_early = ebsa110_init_early,
.init_irq = ebsa110_init_irq,
- .timer = &ebsa110_timer,
+ .init_time = ebsa110_timer_init,
.restart = ebsa110_restart,
MACHINE_END
diff --git a/arch/arm/mach-ebsa110/include/mach/uncompress.h b/arch/arm/mach-ebsa110/include/mach/uncompress.h
index 3204150..ab64bea 100644
--- a/arch/arm/mach-ebsa110/include/mach/uncompress.h
+++ b/arch/arm/mach-ebsa110/include/mach/uncompress.h
@@ -42,4 +42,3 @@
* nothing to do
*/
#define arch_decomp_setup()
-#define arch_decomp_wdog()
diff --git a/arch/arm/mach-ep93xx/adssphere.c b/arch/arm/mach-ep93xx/adssphere.c
index 41383bf..bda6c3a 100644
--- a/arch/arm/mach-ep93xx/adssphere.c
+++ b/arch/arm/mach-ep93xx/adssphere.c
@@ -17,7 +17,6 @@
#include <mach/hardware.h>
-#include <asm/hardware/vic.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
@@ -39,8 +38,7 @@
.atag_offset = 0x100,
.map_io = ep93xx_map_io,
.init_irq = ep93xx_init_irq,
- .handle_irq = vic_handle_irq,
- .timer = &ep93xx_timer,
+ .init_time = ep93xx_timer_init,
.init_machine = adssphere_init_machine,
.init_late = ep93xx_init_late,
.restart = ep93xx_restart,
diff --git a/arch/arm/mach-ep93xx/core.c b/arch/arm/mach-ep93xx/core.c
index e85bf17..c49ed3d 100644
--- a/arch/arm/mach-ep93xx/core.c
+++ b/arch/arm/mach-ep93xx/core.c
@@ -34,6 +34,7 @@
#include <linux/i2c-gpio.h>
#include <linux/spi/spi.h>
#include <linux/export.h>
+#include <linux/irqchip/arm-vic.h>
#include <mach/hardware.h>
#include <linux/platform_data/video-ep93xx.h>
@@ -44,8 +45,6 @@
#include <asm/mach/map.h>
#include <asm/mach/time.h>
-#include <asm/hardware/vic.h>
-
#include "soc.h"
/*************************************************************************
@@ -140,11 +139,29 @@
.handler = ep93xx_timer_interrupt,
};
-static void __init ep93xx_timer_init(void)
+static u32 ep93xx_gettimeoffset(void)
+{
+ int offset;
+
+ offset = __raw_readl(EP93XX_TIMER4_VALUE_LOW) - last_jiffy_time;
+
+ /*
+ * Timer 4 is based on a 983.04 kHz reference clock,
+ * so dividing by 983040 gives the fraction of a second,
+ * so dividing by 0.983040 converts to uS.
+ * Refactor the calculation to avoid overflow.
+ * Finally, multiply by 1000 to give nS.
+ */
+ return (offset + (53 * offset / 3072)) * 1000;
+}
+
+void __init ep93xx_timer_init(void)
{
u32 tmode = EP93XX_TIMER123_CONTROL_MODE |
EP93XX_TIMER123_CONTROL_CLKSEL;
+ arch_gettimeoffset = ep93xx_gettimeoffset;
+
/* Enable periodic HZ timer. */
__raw_writel(tmode, EP93XX_TIMER1_CONTROL);
__raw_writel(TIMER1_RELOAD, EP93XX_TIMER1_LOAD);
@@ -158,21 +175,6 @@
setup_irq(IRQ_EP93XX_TIMER1, &ep93xx_timer_irq);
}
-static unsigned long ep93xx_gettimeoffset(void)
-{
- int offset;
-
- offset = __raw_readl(EP93XX_TIMER4_VALUE_LOW) - last_jiffy_time;
-
- /* Calculate (1000000 / 983040) * offset. */
- return offset + (53 * offset / 3072);
-}
-
-struct sys_timer ep93xx_timer = {
- .init = ep93xx_timer_init,
- .offset = ep93xx_gettimeoffset,
-};
-
/*************************************************************************
* EP93xx IRQ handling
diff --git a/arch/arm/mach-ep93xx/edb93xx.c b/arch/arm/mach-ep93xx/edb93xx.c
index b8f53d5..27b14ae 100644
--- a/arch/arm/mach-ep93xx/edb93xx.c
+++ b/arch/arm/mach-ep93xx/edb93xx.c
@@ -39,7 +39,6 @@
#include <linux/platform_data/spi-ep93xx.h>
#include <mach/gpio-ep93xx.h>
-#include <asm/hardware/vic.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
@@ -276,8 +275,7 @@
.atag_offset = 0x100,
.map_io = ep93xx_map_io,
.init_irq = ep93xx_init_irq,
- .handle_irq = vic_handle_irq,
- .timer = &ep93xx_timer,
+ .init_time = ep93xx_timer_init,
.init_machine = edb93xx_init_machine,
.init_late = ep93xx_init_late,
.restart = ep93xx_restart,
@@ -290,8 +288,7 @@
.atag_offset = 0x100,
.map_io = ep93xx_map_io,
.init_irq = ep93xx_init_irq,
- .handle_irq = vic_handle_irq,
- .timer = &ep93xx_timer,
+ .init_time = ep93xx_timer_init,
.init_machine = edb93xx_init_machine,
.init_late = ep93xx_init_late,
.restart = ep93xx_restart,
@@ -304,8 +301,7 @@
.atag_offset = 0x100,
.map_io = ep93xx_map_io,
.init_irq = ep93xx_init_irq,
- .handle_irq = vic_handle_irq,
- .timer = &ep93xx_timer,
+ .init_time = ep93xx_timer_init,
.init_machine = edb93xx_init_machine,
.init_late = ep93xx_init_late,
.restart = ep93xx_restart,
@@ -318,8 +314,7 @@
.atag_offset = 0x100,
.map_io = ep93xx_map_io,
.init_irq = ep93xx_init_irq,
- .handle_irq = vic_handle_irq,
- .timer = &ep93xx_timer,
+ .init_time = ep93xx_timer_init,
.init_machine = edb93xx_init_machine,
.init_late = ep93xx_init_late,
.restart = ep93xx_restart,
@@ -332,8 +327,7 @@
.atag_offset = 0x100,
.map_io = ep93xx_map_io,
.init_irq = ep93xx_init_irq,
- .handle_irq = vic_handle_irq,
- .timer = &ep93xx_timer,
+ .init_time = ep93xx_timer_init,
.init_machine = edb93xx_init_machine,
.init_late = ep93xx_init_late,
.restart = ep93xx_restart,
@@ -346,8 +340,7 @@
.atag_offset = 0x100,
.map_io = ep93xx_map_io,
.init_irq = ep93xx_init_irq,
- .handle_irq = vic_handle_irq,
- .timer = &ep93xx_timer,
+ .init_time = ep93xx_timer_init,
.init_machine = edb93xx_init_machine,
.init_late = ep93xx_init_late,
.restart = ep93xx_restart,
@@ -360,8 +353,7 @@
.atag_offset = 0x100,
.map_io = ep93xx_map_io,
.init_irq = ep93xx_init_irq,
- .handle_irq = vic_handle_irq,
- .timer = &ep93xx_timer,
+ .init_time = ep93xx_timer_init,
.init_machine = edb93xx_init_machine,
.init_late = ep93xx_init_late,
.restart = ep93xx_restart,
@@ -374,8 +366,7 @@
.atag_offset = 0x100,
.map_io = ep93xx_map_io,
.init_irq = ep93xx_init_irq,
- .handle_irq = vic_handle_irq,
- .timer = &ep93xx_timer,
+ .init_time = ep93xx_timer_init,
.init_machine = edb93xx_init_machine,
.init_late = ep93xx_init_late,
.restart = ep93xx_restart,
diff --git a/arch/arm/mach-ep93xx/gesbc9312.c b/arch/arm/mach-ep93xx/gesbc9312.c
index 7fd705b..0cca5b1 100644
--- a/arch/arm/mach-ep93xx/gesbc9312.c
+++ b/arch/arm/mach-ep93xx/gesbc9312.c
@@ -17,7 +17,6 @@
#include <mach/hardware.h>
-#include <asm/hardware/vic.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
@@ -39,8 +38,7 @@
.atag_offset = 0x100,
.map_io = ep93xx_map_io,
.init_irq = ep93xx_init_irq,
- .handle_irq = vic_handle_irq,
- .timer = &ep93xx_timer,
+ .init_time = ep93xx_timer_init,
.init_machine = gesbc9312_init_machine,
.init_late = ep93xx_init_late,
.restart = ep93xx_restart,
diff --git a/arch/arm/mach-ep93xx/include/mach/platform.h b/arch/arm/mach-ep93xx/include/mach/platform.h
index 33a5122..a14e1b3 100644
--- a/arch/arm/mach-ep93xx/include/mach/platform.h
+++ b/arch/arm/mach-ep93xx/include/mach/platform.h
@@ -53,7 +53,7 @@
void ep93xx_ide_release_gpio(struct platform_device *pdev);
void ep93xx_init_devices(void);
-extern struct sys_timer ep93xx_timer;
+extern void ep93xx_timer_init(void);
void ep93xx_restart(char, const char *);
void ep93xx_init_late(void);
diff --git a/arch/arm/mach-ep93xx/include/mach/uncompress.h b/arch/arm/mach-ep93xx/include/mach/uncompress.h
index d64274f..d2afb4d 100644
--- a/arch/arm/mach-ep93xx/include/mach/uncompress.h
+++ b/arch/arm/mach-ep93xx/include/mach/uncompress.h
@@ -86,5 +86,3 @@
{
ethernet_reset();
}
-
-#define arch_decomp_wdog()
diff --git a/arch/arm/mach-ep93xx/micro9.c b/arch/arm/mach-ep93xx/micro9.c
index 3d7cdab..373583c 100644
--- a/arch/arm/mach-ep93xx/micro9.c
+++ b/arch/arm/mach-ep93xx/micro9.c
@@ -18,7 +18,6 @@
#include <mach/hardware.h>
-#include <asm/hardware/vic.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
@@ -82,8 +81,7 @@
.atag_offset = 0x100,
.map_io = ep93xx_map_io,
.init_irq = ep93xx_init_irq,
- .handle_irq = vic_handle_irq,
- .timer = &ep93xx_timer,
+ .init_time = ep93xx_timer_init,
.init_machine = micro9_init_machine,
.init_late = ep93xx_init_late,
.restart = ep93xx_restart,
@@ -96,8 +94,7 @@
.atag_offset = 0x100,
.map_io = ep93xx_map_io,
.init_irq = ep93xx_init_irq,
- .handle_irq = vic_handle_irq,
- .timer = &ep93xx_timer,
+ .init_time = ep93xx_timer_init,
.init_machine = micro9_init_machine,
.init_late = ep93xx_init_late,
.restart = ep93xx_restart,
@@ -110,8 +107,7 @@
.atag_offset = 0x100,
.map_io = ep93xx_map_io,
.init_irq = ep93xx_init_irq,
- .handle_irq = vic_handle_irq,
- .timer = &ep93xx_timer,
+ .init_time = ep93xx_timer_init,
.init_machine = micro9_init_machine,
.init_late = ep93xx_init_late,
.restart = ep93xx_restart,
@@ -124,8 +120,7 @@
.atag_offset = 0x100,
.map_io = ep93xx_map_io,
.init_irq = ep93xx_init_irq,
- .handle_irq = vic_handle_irq,
- .timer = &ep93xx_timer,
+ .init_time = ep93xx_timer_init,
.init_machine = micro9_init_machine,
.init_late = ep93xx_init_late,
.restart = ep93xx_restart,
diff --git a/arch/arm/mach-ep93xx/simone.c b/arch/arm/mach-ep93xx/simone.c
index 0eb3f17..36f22c1 100644
--- a/arch/arm/mach-ep93xx/simone.c
+++ b/arch/arm/mach-ep93xx/simone.c
@@ -25,7 +25,6 @@
#include <linux/platform_data/video-ep93xx.h>
#include <mach/gpio-ep93xx.h>
-#include <asm/hardware/vic.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
@@ -83,8 +82,7 @@
.atag_offset = 0x100,
.map_io = ep93xx_map_io,
.init_irq = ep93xx_init_irq,
- .handle_irq = vic_handle_irq,
- .timer = &ep93xx_timer,
+ .init_time = ep93xx_timer_init,
.init_machine = simone_init_machine,
.init_late = ep93xx_init_late,
.restart = ep93xx_restart,
diff --git a/arch/arm/mach-ep93xx/snappercl15.c b/arch/arm/mach-ep93xx/snappercl15.c
index 50043ee..aa86f86 100644
--- a/arch/arm/mach-ep93xx/snappercl15.c
+++ b/arch/arm/mach-ep93xx/snappercl15.c
@@ -31,7 +31,6 @@
#include <linux/platform_data/video-ep93xx.h>
#include <mach/gpio-ep93xx.h>
-#include <asm/hardware/vic.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
@@ -176,8 +175,7 @@
.atag_offset = 0x100,
.map_io = ep93xx_map_io,
.init_irq = ep93xx_init_irq,
- .handle_irq = vic_handle_irq,
- .timer = &ep93xx_timer,
+ .init_time = ep93xx_timer_init,
.init_machine = snappercl15_init_machine,
.init_late = ep93xx_init_late,
.restart = ep93xx_restart,
diff --git a/arch/arm/mach-ep93xx/ts72xx.c b/arch/arm/mach-ep93xx/ts72xx.c
index 3c4c233..61f4b5d 100644
--- a/arch/arm/mach-ep93xx/ts72xx.c
+++ b/arch/arm/mach-ep93xx/ts72xx.c
@@ -22,7 +22,6 @@
#include <mach/hardware.h>
-#include <asm/hardware/vic.h>
#include <asm/mach-types.h>
#include <asm/mach/map.h>
#include <asm/mach/arch.h>
@@ -246,8 +245,7 @@
.atag_offset = 0x100,
.map_io = ts72xx_map_io,
.init_irq = ep93xx_init_irq,
- .handle_irq = vic_handle_irq,
- .timer = &ep93xx_timer,
+ .init_time = ep93xx_timer_init,
.init_machine = ts72xx_init_machine,
.init_late = ep93xx_init_late,
.restart = ep93xx_restart,
diff --git a/arch/arm/mach-ep93xx/vision_ep9307.c b/arch/arm/mach-ep93xx/vision_ep9307.c
index ba92e25..605956f 100644
--- a/arch/arm/mach-ep93xx/vision_ep9307.c
+++ b/arch/arm/mach-ep93xx/vision_ep9307.c
@@ -34,7 +34,6 @@
#include <linux/platform_data/spi-ep93xx.h>
#include <mach/gpio-ep93xx.h>
-#include <asm/hardware/vic.h>
#include <asm/mach-types.h>
#include <asm/mach/map.h>
#include <asm/mach/arch.h>
@@ -364,8 +363,7 @@
.atag_offset = 0x100,
.map_io = vision_map_io,
.init_irq = ep93xx_init_irq,
- .handle_irq = vic_handle_irq,
- .timer = &ep93xx_timer,
+ .init_time = ep93xx_timer_init,
.init_machine = vision_init_machine,
.init_late = ep93xx_init_late,
.restart = ep93xx_restart,
diff --git a/arch/arm/mach-exynos/common.c b/arch/arm/mach-exynos/common.c
index 0c7e3ad..d63d399c 100644
--- a/arch/arm/mach-exynos/common.c
+++ b/arch/arm/mach-exynos/common.c
@@ -12,6 +12,7 @@
#include <linux/kernel.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
+#include <linux/irqchip.h>
#include <linux/io.h>
#include <linux/device.h>
#include <linux/gpio.h>
@@ -22,12 +23,13 @@
#include <linux/of_irq.h>
#include <linux/export.h>
#include <linux/irqdomain.h>
+#include <linux/irqchip.h>
#include <linux/of_address.h>
+#include <linux/irqchip/arm-gic.h>
#include <asm/proc-fns.h>
#include <asm/exception.h>
#include <asm/hardware/cache-l2x0.h>
-#include <asm/hardware/gic.h>
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
#include <asm/cacheflush.h>
@@ -35,7 +37,6 @@
#include <mach/regs-irq.h>
#include <mach/regs-pmu.h>
#include <mach/regs-gpio.h>
-#include <mach/pmu.h>
#include <plat/cpu.h>
#include <plat/clock.h>
@@ -440,220 +441,6 @@
#endif
}
-#define COMBINER_ENABLE_SET 0x0
-#define COMBINER_ENABLE_CLEAR 0x4
-#define COMBINER_INT_STATUS 0xC
-
-static DEFINE_SPINLOCK(irq_controller_lock);
-
-struct combiner_chip_data {
- unsigned int irq_offset;
- unsigned int irq_mask;
- void __iomem *base;
-};
-
-static struct irq_domain *combiner_irq_domain;
-static struct combiner_chip_data combiner_data[MAX_COMBINER_NR];
-
-static inline void __iomem *combiner_base(struct irq_data *data)
-{
- struct combiner_chip_data *combiner_data =
- irq_data_get_irq_chip_data(data);
-
- return combiner_data->base;
-}
-
-static void combiner_mask_irq(struct irq_data *data)
-{
- u32 mask = 1 << (data->hwirq % 32);
-
- __raw_writel(mask, combiner_base(data) + COMBINER_ENABLE_CLEAR);
-}
-
-static void combiner_unmask_irq(struct irq_data *data)
-{
- u32 mask = 1 << (data->hwirq % 32);
-
- __raw_writel(mask, combiner_base(data) + COMBINER_ENABLE_SET);
-}
-
-static void combiner_handle_cascade_irq(unsigned int irq, struct irq_desc *desc)
-{
- struct combiner_chip_data *chip_data = irq_get_handler_data(irq);
- struct irq_chip *chip = irq_get_chip(irq);
- unsigned int cascade_irq, combiner_irq;
- unsigned long status;
-
- chained_irq_enter(chip, desc);
-
- spin_lock(&irq_controller_lock);
- status = __raw_readl(chip_data->base + COMBINER_INT_STATUS);
- spin_unlock(&irq_controller_lock);
- status &= chip_data->irq_mask;
-
- if (status == 0)
- goto out;
-
- combiner_irq = __ffs(status);
-
- cascade_irq = combiner_irq + (chip_data->irq_offset & ~31);
- if (unlikely(cascade_irq >= NR_IRQS))
- do_bad_IRQ(cascade_irq, desc);
- else
- generic_handle_irq(cascade_irq);
-
- out:
- chained_irq_exit(chip, desc);
-}
-
-static struct irq_chip combiner_chip = {
- .name = "COMBINER",
- .irq_mask = combiner_mask_irq,
- .irq_unmask = combiner_unmask_irq,
-};
-
-static void __init combiner_cascade_irq(unsigned int combiner_nr, unsigned int irq)
-{
- unsigned int max_nr;
-
- if (soc_is_exynos5250())
- max_nr = EXYNOS5_MAX_COMBINER_NR;
- else
- max_nr = EXYNOS4_MAX_COMBINER_NR;
-
- if (combiner_nr >= max_nr)
- BUG();
- if (irq_set_handler_data(irq, &combiner_data[combiner_nr]) != 0)
- BUG();
- irq_set_chained_handler(irq, combiner_handle_cascade_irq);
-}
-
-static void __init combiner_init_one(unsigned int combiner_nr,
- void __iomem *base)
-{
- combiner_data[combiner_nr].base = base;
- combiner_data[combiner_nr].irq_offset = irq_find_mapping(
- combiner_irq_domain, combiner_nr * MAX_IRQ_IN_COMBINER);
- combiner_data[combiner_nr].irq_mask = 0xff << ((combiner_nr % 4) << 3);
-
- /* Disable all interrupts */
- __raw_writel(combiner_data[combiner_nr].irq_mask,
- base + COMBINER_ENABLE_CLEAR);
-}
-
-#ifdef CONFIG_OF
-static int combiner_irq_domain_xlate(struct irq_domain *d,
- struct device_node *controller,
- const u32 *intspec, unsigned int intsize,
- unsigned long *out_hwirq,
- unsigned int *out_type)
-{
- if (d->of_node != controller)
- return -EINVAL;
-
- if (intsize < 2)
- return -EINVAL;
-
- *out_hwirq = intspec[0] * MAX_IRQ_IN_COMBINER + intspec[1];
- *out_type = 0;
-
- return 0;
-}
-#else
-static int combiner_irq_domain_xlate(struct irq_domain *d,
- struct device_node *controller,
- const u32 *intspec, unsigned int intsize,
- unsigned long *out_hwirq,
- unsigned int *out_type)
-{
- return -EINVAL;
-}
-#endif
-
-static int combiner_irq_domain_map(struct irq_domain *d, unsigned int irq,
- irq_hw_number_t hw)
-{
- irq_set_chip_and_handler(irq, &combiner_chip, handle_level_irq);
- irq_set_chip_data(irq, &combiner_data[hw >> 3]);
- set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
-
- return 0;
-}
-
-static struct irq_domain_ops combiner_irq_domain_ops = {
- .xlate = combiner_irq_domain_xlate,
- .map = combiner_irq_domain_map,
-};
-
-static void __init combiner_init(void __iomem *combiner_base,
- struct device_node *np)
-{
- int i, irq, irq_base;
- unsigned int max_nr, nr_irq;
-
- if (np) {
- if (of_property_read_u32(np, "samsung,combiner-nr", &max_nr)) {
- pr_warning("%s: number of combiners not specified, "
- "setting default as %d.\n",
- __func__, EXYNOS4_MAX_COMBINER_NR);
- max_nr = EXYNOS4_MAX_COMBINER_NR;
- }
- } else {
- max_nr = soc_is_exynos5250() ? EXYNOS5_MAX_COMBINER_NR :
- EXYNOS4_MAX_COMBINER_NR;
- }
- nr_irq = max_nr * MAX_IRQ_IN_COMBINER;
-
- irq_base = irq_alloc_descs(COMBINER_IRQ(0, 0), 1, nr_irq, 0);
- if (IS_ERR_VALUE(irq_base)) {
- irq_base = COMBINER_IRQ(0, 0);
- pr_warning("%s: irq desc alloc failed. Continuing with %d as linux irq base\n", __func__, irq_base);
- }
-
- combiner_irq_domain = irq_domain_add_legacy(np, nr_irq, irq_base, 0,
- &combiner_irq_domain_ops, &combiner_data);
- if (WARN_ON(!combiner_irq_domain)) {
- pr_warning("%s: irq domain init failed\n", __func__);
- return;
- }
-
- for (i = 0; i < max_nr; i++) {
- combiner_init_one(i, combiner_base + (i >> 2) * 0x10);
- irq = IRQ_SPI(i);
-#ifdef CONFIG_OF
- if (np)
- irq = irq_of_parse_and_map(np, i);
-#endif
- combiner_cascade_irq(i, irq);
- }
-}
-
-#ifdef CONFIG_OF
-static int __init combiner_of_init(struct device_node *np,
- struct device_node *parent)
-{
- void __iomem *combiner_base;
-
- combiner_base = of_iomap(np, 0);
- if (!combiner_base) {
- pr_err("%s: failed to map combiner registers\n", __func__);
- return -ENXIO;
- }
-
- combiner_init(combiner_base, np);
-
- return 0;
-}
-
-static const struct of_device_id exynos_dt_irq_match[] = {
- { .compatible = "arm,cortex-a9-gic", .data = gic_of_init, },
- { .compatible = "arm,cortex-a15-gic", .data = gic_of_init, },
- { .compatible = "samsung,exynos4210-combiner",
- .data = combiner_of_init, },
- {},
-};
-#endif
-
void __init exynos4_init_irq(void)
{
unsigned int gic_bank_offset;
@@ -664,7 +451,7 @@
gic_init_bases(0, IRQ_PPI(0), S5P_VA_GIC_DIST, S5P_VA_GIC_CPU, gic_bank_offset, NULL);
#ifdef CONFIG_OF
else
- of_irq_init(exynos_dt_irq_match);
+ irqchip_init();
#endif
if (!of_have_populated_dt())
@@ -681,7 +468,7 @@
void __init exynos5_init_irq(void)
{
#ifdef CONFIG_OF
- of_irq_init(exynos_dt_irq_match);
+ irqchip_init();
#endif
/*
* The parameters of s5p_init_irq() are for VIC init.
diff --git a/arch/arm/mach-exynos/common.h b/arch/arm/mach-exynos/common.h
index 04744f9..9339bb8 100644
--- a/arch/arm/mach-exynos/common.h
+++ b/arch/arm/mach-exynos/common.h
@@ -12,7 +12,7 @@
#ifndef __ARCH_ARM_MACH_EXYNOS_COMMON_H
#define __ARCH_ARM_MACH_EXYNOS_COMMON_H
-extern struct sys_timer exynos4_timer;
+extern void exynos4_timer_init(void);
struct map_desc;
void exynos_init_io(struct map_desc *mach_desc, int size);
@@ -60,8 +60,31 @@
#define exynos4212_register_clocks()
#endif
+struct device_node;
+void combiner_init(void __iomem *combiner_base, struct device_node *np);
+
extern struct smp_operations exynos_smp_ops;
extern void exynos_cpu_die(unsigned int cpu);
+/* PMU(Power Management Unit) support */
+
+#define PMU_TABLE_END NULL
+
+enum sys_powerdown {
+ SYS_AFTR,
+ SYS_LPA,
+ SYS_SLEEP,
+ NUM_SYS_POWERDOWN,
+};
+
+extern unsigned long l2x0_regs_phys;
+struct exynos_pmu_conf {
+ void __iomem *reg;
+ unsigned int val[NUM_SYS_POWERDOWN];
+};
+
+extern void exynos_sys_powerdown_conf(enum sys_powerdown mode);
+extern void s3c_cpu_resume(void);
+
#endif /* __ARCH_ARM_MACH_EXYNOS_COMMON_H */
diff --git a/arch/arm/mach-exynos/cpuidle.c b/arch/arm/mach-exynos/cpuidle.c
index 0509241..fcfe025 100644
--- a/arch/arm/mach-exynos/cpuidle.c
+++ b/arch/arm/mach-exynos/cpuidle.c
@@ -23,10 +23,11 @@
#include <asm/cpuidle.h>
#include <mach/regs-clock.h>
#include <mach/regs-pmu.h>
-#include <mach/pmu.h>
#include <plat/cpu.h>
+#include "common.h"
+
#define REG_DIRECTGO_ADDR (samsung_rev() == EXYNOS4210_REV_1_1 ? \
S5P_INFORM7 : (samsung_rev() == EXYNOS4210_REV_1_0 ? \
(S5P_VA_SYSRAM + 0x24) : S5P_INFORM0))
diff --git a/arch/arm/mach-exynos/dev-audio.c b/arch/arm/mach-exynos/dev-audio.c
index 9d1a609..c662c89 100644
--- a/arch/arm/mach-exynos/dev-audio.c
+++ b/arch/arm/mach-exynos/dev-audio.c
@@ -21,7 +21,8 @@
#include <mach/map.h>
#include <mach/dma.h>
#include <mach/irqs.h>
-#include <mach/regs-audss.h>
+
+#define EXYNOS4_AUDSS_INT_MEM (0x03000000)
static int exynos4_cfg_i2s(struct platform_device *pdev)
{
diff --git a/arch/arm/mach-exynos/include/mach/pmu.h b/arch/arm/mach-exynos/include/mach/pmu.h
deleted file mode 100644
index 7c27c2d..0000000
--- a/arch/arm/mach-exynos/include/mach/pmu.h
+++ /dev/null
@@ -1,34 +0,0 @@
-/* linux/arch/arm/mach-exynos4/include/mach/pmu.h
- *
- * Copyright (c) 2011 Samsung Electronics Co., Ltd.
- * http://www.samsung.com/
- *
- * EXYNOS4210 - PMU(Power Management Unit) support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_PMU_H
-#define __ASM_ARCH_PMU_H __FILE__
-
-#define PMU_TABLE_END NULL
-
-enum sys_powerdown {
- SYS_AFTR,
- SYS_LPA,
- SYS_SLEEP,
- NUM_SYS_POWERDOWN,
-};
-
-extern unsigned long l2x0_regs_phys;
-struct exynos_pmu_conf {
- void __iomem *reg;
- unsigned int val[NUM_SYS_POWERDOWN];
-};
-
-extern void exynos_sys_powerdown_conf(enum sys_powerdown mode);
-extern void s3c_cpu_resume(void);
-
-#endif /* __ASM_ARCH_PMU_H */
diff --git a/arch/arm/mach-exynos/include/mach/regs-audss.h b/arch/arm/mach-exynos/include/mach/regs-audss.h
deleted file mode 100644
index ca5a8b6..0000000
--- a/arch/arm/mach-exynos/include/mach/regs-audss.h
+++ /dev/null
@@ -1,18 +0,0 @@
-/* arch/arm/mach-exynos4/include/mach/regs-audss.h
- *
- * Copyright (c) 2011 Samsung Electronics
- * http://www.samsung.com
- *
- * Exynos4 Audio SubSystem clock register definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __PLAT_REGS_AUDSS_H
-#define __PLAT_REGS_AUDSS_H __FILE__
-
-#define EXYNOS4_AUDSS_INT_MEM (0x03000000)
-
-#endif /* _PLAT_REGS_AUDSS_H */
diff --git a/arch/arm/mach-exynos/include/mach/regs-irq.h b/arch/arm/mach-exynos/include/mach/regs-irq.h
index 9c7b4bf..f2b5050 100644
--- a/arch/arm/mach-exynos/include/mach/regs-irq.h
+++ b/arch/arm/mach-exynos/include/mach/regs-irq.h
@@ -13,7 +13,7 @@
#ifndef __ASM_ARCH_REGS_IRQ_H
#define __ASM_ARCH_REGS_IRQ_H __FILE__
-#include <asm/hardware/gic.h>
+#include <linux/irqchip/arm-gic.h>
#include <mach/map.h>
#endif /* __ASM_ARCH_REGS_IRQ_H */
diff --git a/arch/arm/mach-exynos/mach-armlex4210.c b/arch/arm/mach-exynos/mach-armlex4210.c
index b938f9f..685f291 100644
--- a/arch/arm/mach-exynos/mach-armlex4210.c
+++ b/arch/arm/mach-exynos/mach-armlex4210.c
@@ -16,7 +16,6 @@
#include <linux/smsc911x.h>
#include <asm/mach/arch.h>
-#include <asm/hardware/gic.h>
#include <asm/mach-types.h>
#include <plat/cpu.h>
@@ -201,9 +200,8 @@
.smp = smp_ops(exynos_smp_ops),
.init_irq = exynos4_init_irq,
.map_io = armlex4210_map_io,
- .handle_irq = gic_handle_irq,
.init_machine = armlex4210_machine_init,
.init_late = exynos_init_late,
- .timer = &exynos4_timer,
+ .init_time = exynos4_timer_init,
.restart = exynos4_restart,
MACHINE_END
diff --git a/arch/arm/mach-exynos/mach-exynos4-dt.c b/arch/arm/mach-exynos/mach-exynos4-dt.c
index 92757ff..112d10e 100644
--- a/arch/arm/mach-exynos/mach-exynos4-dt.c
+++ b/arch/arm/mach-exynos/mach-exynos4-dt.c
@@ -15,7 +15,6 @@
#include <linux/serial_core.h>
#include <asm/mach/arch.h>
-#include <asm/hardware/gic.h>
#include <mach/map.h>
#include <plat/cpu.h>
@@ -107,10 +106,9 @@
.smp = smp_ops(exynos_smp_ops),
.init_irq = exynos4_init_irq,
.map_io = exynos4_dt_map_io,
- .handle_irq = gic_handle_irq,
.init_machine = exynos4_dt_machine_init,
.init_late = exynos_init_late,
- .timer = &exynos4_timer,
+ .init_time = exynos4_timer_init,
.dt_compat = exynos4_dt_compat,
.restart = exynos4_restart,
MACHINE_END
diff --git a/arch/arm/mach-exynos/mach-exynos5-dt.c b/arch/arm/mach-exynos/mach-exynos5-dt.c
index ea9e302..973a066 100644
--- a/arch/arm/mach-exynos/mach-exynos5-dt.c
+++ b/arch/arm/mach-exynos/mach-exynos5-dt.c
@@ -16,7 +16,6 @@
#include <linux/io.h>
#include <asm/mach/arch.h>
-#include <asm/hardware/gic.h>
#include <mach/map.h>
#include <mach/regs-pmu.h>
@@ -185,10 +184,9 @@
.init_irq = exynos5_init_irq,
.smp = smp_ops(exynos_smp_ops),
.map_io = exynos5_dt_map_io,
- .handle_irq = gic_handle_irq,
.init_machine = exynos5_dt_machine_init,
.init_late = exynos_init_late,
- .timer = &exynos4_timer,
+ .init_time = exynos4_timer_init,
.dt_compat = exynos5_dt_compat,
.restart = exynos5_restart,
.reserve = exynos5_reserve,
diff --git a/arch/arm/mach-exynos/mach-nuri.c b/arch/arm/mach-exynos/mach-nuri.c
index 27d4ed8..b8b3fbf 100644
--- a/arch/arm/mach-exynos/mach-nuri.c
+++ b/arch/arm/mach-exynos/mach-nuri.c
@@ -39,7 +39,6 @@
#include <media/v4l2-mediabus.h>
#include <asm/mach/arch.h>
-#include <asm/hardware/gic.h>
#include <asm/mach-types.h>
#include <plat/adc.h>
@@ -1379,10 +1378,9 @@
.smp = smp_ops(exynos_smp_ops),
.init_irq = exynos4_init_irq,
.map_io = nuri_map_io,
- .handle_irq = gic_handle_irq,
.init_machine = nuri_machine_init,
.init_late = exynos_init_late,
- .timer = &exynos4_timer,
+ .init_time = exynos4_timer_init,
.reserve = &nuri_reserve,
.restart = exynos4_restart,
MACHINE_END
diff --git a/arch/arm/mach-exynos/mach-origen.c b/arch/arm/mach-exynos/mach-origen.c
index 5e34b9c..579d2d1 100644
--- a/arch/arm/mach-exynos/mach-origen.c
+++ b/arch/arm/mach-exynos/mach-origen.c
@@ -29,7 +29,6 @@
#include <linux/platform_data/usb-exynos.h>
#include <asm/mach/arch.h>
-#include <asm/hardware/gic.h>
#include <asm/mach-types.h>
#include <video/platform_lcd.h>
@@ -814,10 +813,9 @@
.smp = smp_ops(exynos_smp_ops),
.init_irq = exynos4_init_irq,
.map_io = origen_map_io,
- .handle_irq = gic_handle_irq,
.init_machine = origen_machine_init,
.init_late = exynos_init_late,
- .timer = &exynos4_timer,
+ .init_time = exynos4_timer_init,
.reserve = &origen_reserve,
.restart = exynos4_restart,
MACHINE_END
diff --git a/arch/arm/mach-exynos/mach-smdk4x12.c b/arch/arm/mach-exynos/mach-smdk4x12.c
index ae6da40..fe61496 100644
--- a/arch/arm/mach-exynos/mach-smdk4x12.c
+++ b/arch/arm/mach-exynos/mach-smdk4x12.c
@@ -25,7 +25,6 @@
#include <linux/platform_data/s3c-hsotg.h>
#include <asm/mach/arch.h>
-#include <asm/hardware/gic.h>
#include <asm/mach-types.h>
#include <video/samsung_fimd.h>
@@ -376,9 +375,8 @@
.smp = smp_ops(exynos_smp_ops),
.init_irq = exynos4_init_irq,
.map_io = smdk4x12_map_io,
- .handle_irq = gic_handle_irq,
.init_machine = smdk4x12_machine_init,
- .timer = &exynos4_timer,
+ .init_time = exynos4_timer_init,
.restart = exynos4_restart,
.reserve = &smdk4x12_reserve,
MACHINE_END
@@ -390,10 +388,9 @@
.smp = smp_ops(exynos_smp_ops),
.init_irq = exynos4_init_irq,
.map_io = smdk4x12_map_io,
- .handle_irq = gic_handle_irq,
.init_machine = smdk4x12_machine_init,
.init_late = exynos_init_late,
- .timer = &exynos4_timer,
+ .init_time = exynos4_timer_init,
.restart = exynos4_restart,
.reserve = &smdk4x12_reserve,
MACHINE_END
diff --git a/arch/arm/mach-exynos/mach-smdkv310.c b/arch/arm/mach-exynos/mach-smdkv310.c
index 35548e3..d716729 100644
--- a/arch/arm/mach-exynos/mach-smdkv310.c
+++ b/arch/arm/mach-exynos/mach-smdkv310.c
@@ -26,7 +26,6 @@
#include <linux/platform_data/usb-exynos.h>
#include <asm/mach/arch.h>
-#include <asm/hardware/gic.h>
#include <asm/mach-types.h>
#include <video/platform_lcd.h>
@@ -423,9 +422,8 @@
.smp = smp_ops(exynos_smp_ops),
.init_irq = exynos4_init_irq,
.map_io = smdkv310_map_io,
- .handle_irq = gic_handle_irq,
.init_machine = smdkv310_machine_init,
- .timer = &exynos4_timer,
+ .init_time = exynos4_timer_init,
.reserve = &smdkv310_reserve,
.restart = exynos4_restart,
MACHINE_END
@@ -436,10 +434,9 @@
.smp = smp_ops(exynos_smp_ops),
.init_irq = exynos4_init_irq,
.map_io = smdkv310_map_io,
- .handle_irq = gic_handle_irq,
.init_machine = smdkv310_machine_init,
.init_late = exynos_init_late,
- .timer = &exynos4_timer,
+ .init_time = exynos4_timer_init,
.reserve = &smdkv310_reserve,
.restart = exynos4_restart,
MACHINE_END
diff --git a/arch/arm/mach-exynos/mach-universal_c210.c b/arch/arm/mach-exynos/mach-universal_c210.c
index 9e3340f..c9d33a4 100644
--- a/arch/arm/mach-exynos/mach-universal_c210.c
+++ b/arch/arm/mach-exynos/mach-universal_c210.c
@@ -29,7 +29,6 @@
#include <drm/exynos_drm.h>
#include <asm/mach/arch.h>
-#include <asm/hardware/gic.h>
#include <asm/mach-types.h>
#include <video/samsung_fimd.h>
@@ -1151,10 +1150,9 @@
.smp = smp_ops(exynos_smp_ops),
.init_irq = exynos4_init_irq,
.map_io = universal_map_io,
- .handle_irq = gic_handle_irq,
.init_machine = universal_machine_init,
.init_late = exynos_init_late,
- .timer = &s5p_timer,
+ .init_time = s5p_timer_init,
.reserve = &universal_reserve,
.restart = exynos4_restart,
MACHINE_END
diff --git a/arch/arm/mach-exynos/mct.c b/arch/arm/mach-exynos/mct.c
index 57668eb..c9d6650 100644
--- a/arch/arm/mach-exynos/mct.c
+++ b/arch/arm/mach-exynos/mct.c
@@ -22,7 +22,6 @@
#include <linux/of.h>
#include <asm/arch_timer.h>
-#include <asm/hardware/gic.h>
#include <asm/localtimer.h>
#include <plat/cpu.h>
@@ -255,13 +254,9 @@
static void exynos4_clockevent_init(void)
{
- clockevents_calc_mult_shift(&mct_comp_device, clk_rate, 5);
- mct_comp_device.max_delta_ns =
- clockevent_delta2ns(0xffffffff, &mct_comp_device);
- mct_comp_device.min_delta_ns =
- clockevent_delta2ns(0xf, &mct_comp_device);
mct_comp_device.cpumask = cpumask_of(0);
- clockevents_register_device(&mct_comp_device);
+ clockevents_config_and_register(&mct_comp_device, clk_rate,
+ 0xf, 0xffffffff);
if (soc_is_exynos5250())
setup_irq(EXYNOS5_IRQ_MCT_G0, &mct_comp_event_irq);
@@ -404,14 +399,8 @@
evt->set_mode = exynos4_tick_set_mode;
evt->features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT;
evt->rating = 450;
-
- clockevents_calc_mult_shift(evt, clk_rate / (TICK_BASE_CNT + 1), 5);
- evt->max_delta_ns =
- clockevent_delta2ns(0x7fffffff, evt);
- evt->min_delta_ns =
- clockevent_delta2ns(0xf, evt);
-
- clockevents_register_device(evt);
+ clockevents_config_and_register(evt, clk_rate / (TICK_BASE_CNT + 1),
+ 0xf, 0x7fffffff);
exynos4_mct_write(TICK_BASE_CNT, mevt->base + MCT_L_TCNTB_OFFSET);
@@ -478,7 +467,7 @@
#endif /* CONFIG_LOCAL_TIMERS */
}
-static void __init exynos_timer_init(void)
+void __init exynos4_timer_init(void)
{
if (soc_is_exynos5440()) {
arch_timer_of_register();
@@ -494,7 +483,3 @@
exynos4_clocksource_init();
exynos4_clockevent_init();
}
-
-struct sys_timer exynos4_timer = {
- .init = exynos_timer_init,
-};
diff --git a/arch/arm/mach-exynos/platsmp.c b/arch/arm/mach-exynos/platsmp.c
index c5c840e..60f7c5b 100644
--- a/arch/arm/mach-exynos/platsmp.c
+++ b/arch/arm/mach-exynos/platsmp.c
@@ -20,9 +20,9 @@
#include <linux/jiffies.h>
#include <linux/smp.h>
#include <linux/io.h>
+#include <linux/irqchip/arm-gic.h>
#include <asm/cacheflush.h>
-#include <asm/hardware/gic.h>
#include <asm/smp_plat.h>
#include <asm/smp_scu.h>
@@ -149,7 +149,7 @@
__raw_writel(virt_to_phys(exynos4_secondary_startup),
cpu_boot_reg(phys_cpu));
- gic_raise_softirq(cpumask_of(cpu), 0);
+ arch_send_wakeup_ipi_mask(cpumask_of(cpu));
if (pen_release == -1)
break;
@@ -190,8 +190,6 @@
for (i = 0; i < ncores; i++)
set_cpu_possible(i, true);
-
- set_smp_cross_call(gic_raise_softirq);
}
static void __init exynos_smp_prepare_cpus(unsigned int max_cpus)
diff --git a/arch/arm/mach-exynos/pm.c b/arch/arm/mach-exynos/pm.c
index 5106ab8..e3faaa81 100644
--- a/arch/arm/mach-exynos/pm.c
+++ b/arch/arm/mach-exynos/pm.c
@@ -34,7 +34,8 @@
#include <mach/regs-clock.h>
#include <mach/regs-pmu.h>
#include <mach/pm-core.h>
-#include <mach/pmu.h>
+
+#include "common.h"
static struct sleep_save exynos4_set_clksrc[] = {
{ .reg = EXYNOS4_CLKSRC_MASK_TOP , .val = 0x00000001, },
diff --git a/arch/arm/mach-exynos/pmu.c b/arch/arm/mach-exynos/pmu.c
index 3a48c85..daebc1a 100644
--- a/arch/arm/mach-exynos/pmu.c
+++ b/arch/arm/mach-exynos/pmu.c
@@ -14,7 +14,8 @@
#include <linux/bug.h>
#include <mach/regs-clock.h>
-#include <mach/pmu.h>
+
+#include "common.h"
static struct exynos_pmu_conf *exynos_pmu_config;
diff --git a/arch/arm/mach-footbridge/cats-hw.c b/arch/arm/mach-footbridge/cats-hw.c
index 25b4536..6987a09 100644
--- a/arch/arm/mach-footbridge/cats-hw.c
+++ b/arch/arm/mach-footbridge/cats-hw.c
@@ -90,6 +90,6 @@
.fixup = fixup_cats,
.map_io = footbridge_map_io,
.init_irq = footbridge_init_irq,
- .timer = &isa_timer,
+ .init_time = isa_timer_init,
.restart = footbridge_restart,
MACHINE_END
diff --git a/arch/arm/mach-footbridge/common.h b/arch/arm/mach-footbridge/common.h
index c9767b89..a846e50 100644
--- a/arch/arm/mach-footbridge/common.h
+++ b/arch/arm/mach-footbridge/common.h
@@ -1,6 +1,6 @@
-extern struct sys_timer footbridge_timer;
-extern struct sys_timer isa_timer;
+extern void footbridge_timer_init(void);
+extern void isa_timer_init(void);
extern void isa_rtc_init(void);
diff --git a/arch/arm/mach-footbridge/dc21285-timer.c b/arch/arm/mach-footbridge/dc21285-timer.c
index 3b54196..9ee78f7 100644
--- a/arch/arm/mach-footbridge/dc21285-timer.c
+++ b/arch/arm/mach-footbridge/dc21285-timer.c
@@ -93,7 +93,7 @@
/*
* Set up timer interrupt.
*/
-static void __init footbridge_timer_init(void)
+void __init footbridge_timer_init(void)
{
struct clock_event_device *ce = &ckevt_dc21285;
@@ -101,14 +101,6 @@
setup_irq(ce->irq, &footbridge_timer_irq);
- clockevents_calc_mult_shift(ce, mem_fclk_21285, 5);
- ce->max_delta_ns = clockevent_delta2ns(0xffffff, ce);
- ce->min_delta_ns = clockevent_delta2ns(0x000004, ce);
ce->cpumask = cpumask_of(smp_processor_id());
-
- clockevents_register_device(ce);
+ clockevents_config_and_register(ce, mem_fclk_21285, 0x4, 0xffffff);
}
-
-struct sys_timer footbridge_timer = {
- .init = footbridge_timer_init,
-};
diff --git a/arch/arm/mach-footbridge/ebsa285.c b/arch/arm/mach-footbridge/ebsa285.c
index b09551e..b082435 100644
--- a/arch/arm/mach-footbridge/ebsa285.c
+++ b/arch/arm/mach-footbridge/ebsa285.c
@@ -101,7 +101,7 @@
.video_end = 0x000bffff,
.map_io = footbridge_map_io,
.init_irq = footbridge_init_irq,
- .timer = &footbridge_timer,
+ .init_time = footbridge_timer_init,
.restart = footbridge_restart,
MACHINE_END
diff --git a/arch/arm/mach-footbridge/include/mach/uncompress.h b/arch/arm/mach-footbridge/include/mach/uncompress.h
index 5dfa442..a69398c 100644
--- a/arch/arm/mach-footbridge/include/mach/uncompress.h
+++ b/arch/arm/mach-footbridge/include/mach/uncompress.h
@@ -35,4 +35,3 @@
* nothing to do
*/
#define arch_decomp_setup()
-#define arch_decomp_wdog()
diff --git a/arch/arm/mach-footbridge/isa-timer.c b/arch/arm/mach-footbridge/isa-timer.c
index c40bb41..d9301dd 100644
--- a/arch/arm/mach-footbridge/isa-timer.c
+++ b/arch/arm/mach-footbridge/isa-timer.c
@@ -31,14 +31,10 @@
.dev_id = &i8253_clockevent,
};
-static void __init isa_timer_init(void)
+void __init isa_timer_init(void)
{
clocksource_i8253_init();
setup_irq(i8253_clockevent.irq, &pit_timer_irq);
clockevent_i8253_init(false);
}
-
-struct sys_timer isa_timer = {
- .init = isa_timer_init,
-};
diff --git a/arch/arm/mach-footbridge/netwinder-hw.c b/arch/arm/mach-footbridge/netwinder-hw.c
index d2d1433..90ea23f 100644
--- a/arch/arm/mach-footbridge/netwinder-hw.c
+++ b/arch/arm/mach-footbridge/netwinder-hw.c
@@ -766,6 +766,6 @@
.fixup = fixup_netwinder,
.map_io = footbridge_map_io,
.init_irq = footbridge_init_irq,
- .timer = &isa_timer,
+ .init_time = isa_timer_init,
.restart = netwinder_restart,
MACHINE_END
diff --git a/arch/arm/mach-footbridge/personal.c b/arch/arm/mach-footbridge/personal.c
index e1e9990..7bdeabd 100644
--- a/arch/arm/mach-footbridge/personal.c
+++ b/arch/arm/mach-footbridge/personal.c
@@ -18,7 +18,7 @@
.atag_offset = 0x100,
.map_io = footbridge_map_io,
.init_irq = footbridge_init_irq,
- .timer = &footbridge_timer,
+ .init_time = footbridge_timer_init,
.restart = footbridge_restart,
MACHINE_END
diff --git a/arch/arm/mach-gemini/board-nas4220b.c b/arch/arm/mach-gemini/board-nas4220b.c
index 5927d3c..08bd650 100644
--- a/arch/arm/mach-gemini/board-nas4220b.c
+++ b/arch/arm/mach-gemini/board-nas4220b.c
@@ -31,10 +31,6 @@
#include "common.h"
-static struct sys_timer ib4220b_timer = {
- .init = gemini_timer_init,
-};
-
static struct gpio_led ib4220b_leds[] = {
{
.name = "nas4220b:orange:hdd",
@@ -105,6 +101,6 @@
.atag_offset = 0x100,
.map_io = gemini_map_io,
.init_irq = gemini_init_irq,
- .timer = &ib4220b_timer,
+ .init_time = gemini_timer_init,
.init_machine = ib4220b_init,
MACHINE_END
diff --git a/arch/arm/mach-gemini/board-rut1xx.c b/arch/arm/mach-gemini/board-rut1xx.c
index cd7437a..fa0a363 100644
--- a/arch/arm/mach-gemini/board-rut1xx.c
+++ b/arch/arm/mach-gemini/board-rut1xx.c
@@ -71,10 +71,6 @@
},
};
-static struct sys_timer rut1xx_timer = {
- .init = gemini_timer_init,
-};
-
static void __init rut1xx_init(void)
{
gemini_gpio_init();
@@ -89,6 +85,6 @@
.atag_offset = 0x100,
.map_io = gemini_map_io,
.init_irq = gemini_init_irq,
- .timer = &rut1xx_timer,
+ .init_time = gemini_timer_init,
.init_machine = rut1xx_init,
MACHINE_END
diff --git a/arch/arm/mach-gemini/board-wbd111.c b/arch/arm/mach-gemini/board-wbd111.c
index a367880..3321cd6 100644
--- a/arch/arm/mach-gemini/board-wbd111.c
+++ b/arch/arm/mach-gemini/board-wbd111.c
@@ -80,10 +80,6 @@
},
};
-static struct sys_timer wbd111_timer = {
- .init = gemini_timer_init,
-};
-
static struct mtd_partition wbd111_partitions[] = {
{
.name = "RedBoot",
@@ -132,6 +128,6 @@
.atag_offset = 0x100,
.map_io = gemini_map_io,
.init_irq = gemini_init_irq,
- .timer = &wbd111_timer,
+ .init_time = gemini_timer_init,
.init_machine = wbd111_init,
MACHINE_END
diff --git a/arch/arm/mach-gemini/board-wbd222.c b/arch/arm/mach-gemini/board-wbd222.c
index f382811..fe33c82 100644
--- a/arch/arm/mach-gemini/board-wbd222.c
+++ b/arch/arm/mach-gemini/board-wbd222.c
@@ -80,10 +80,6 @@
},
};
-static struct sys_timer wbd222_timer = {
- .init = gemini_timer_init,
-};
-
static struct mtd_partition wbd222_partitions[] = {
{
.name = "RedBoot",
@@ -132,6 +128,6 @@
.atag_offset = 0x100,
.map_io = gemini_map_io,
.init_irq = gemini_init_irq,
- .timer = &wbd222_timer,
+ .init_time = gemini_timer_init,
.init_machine = wbd222_init,
MACHINE_END
diff --git a/arch/arm/mach-gemini/include/mach/uncompress.h b/arch/arm/mach-gemini/include/mach/uncompress.h
index 0efa262..02e2256 100644
--- a/arch/arm/mach-gemini/include/mach/uncompress.h
+++ b/arch/arm/mach-gemini/include/mach/uncompress.h
@@ -39,6 +39,4 @@
*/
#define arch_decomp_setup()
-#define arch_decomp_wdog()
-
#endif /* __MACH_UNCOMPRESS_H */
diff --git a/arch/arm/mach-h720x/common.c b/arch/arm/mach-h720x/common.c
index aa1331e..17ef91f 100644
--- a/arch/arm/mach-h720x/common.c
+++ b/arch/arm/mach-h720x/common.c
@@ -42,12 +42,12 @@
}
/*
- * Return usecs since last timer reload
+ * Return nsecs since last timer reload
* (timercount * (usecs perjiffie)) / (ticks per jiffie)
*/
-unsigned long h720x_gettimeoffset(void)
+u32 h720x_gettimeoffset(void)
{
- return (CPU_REG (TIMER_VIRT, TM0_COUNT) * tick_usec) / LATCH;
+ return ((CPU_REG(TIMER_VIRT, TM0_COUNT) * tick_usec) / LATCH) * 1000;
}
/*
diff --git a/arch/arm/mach-h720x/common.h b/arch/arm/mach-h720x/common.h
index 2489537..7e73841 100644
--- a/arch/arm/mach-h720x/common.h
+++ b/arch/arm/mach-h720x/common.h
@@ -13,18 +13,18 @@
*
*/
-extern unsigned long h720x_gettimeoffset(void);
+extern u32 h720x_gettimeoffset(void);
extern void __init h720x_init_irq(void);
extern void __init h720x_map_io(void);
extern void h720x_restart(char, const char *);
#ifdef CONFIG_ARCH_H7202
-extern struct sys_timer h7202_timer;
+extern void h7202_timer_init(void);
extern void __init init_hw_h7202(void);
extern void __init h7202_init_irq(void);
extern void __init h7202_init_time(void);
#endif
#ifdef CONFIG_ARCH_H7201
-extern struct sys_timer h7201_timer;
+extern void h7201_timer_init(void);
#endif
diff --git a/arch/arm/mach-h720x/cpu-h7201.c b/arch/arm/mach-h720x/cpu-h7201.c
index 24df2a3..13c7412 100644
--- a/arch/arm/mach-h720x/cpu-h7201.c
+++ b/arch/arm/mach-h720x/cpu-h7201.c
@@ -44,8 +44,10 @@
/*
* Setup TIMER0 as system timer
*/
-void __init h7201_init_time(void)
+void __init h7201_timer_init(void)
{
+ arch_gettimeoffset = h720x_gettimeoffset;
+
CPU_REG (TIMER_VIRT, TM0_PERIOD) = LATCH;
CPU_REG (TIMER_VIRT, TM0_CTRL) = TM_RESET;
CPU_REG (TIMER_VIRT, TM0_CTRL) = TM_REPEAT | TM_START;
@@ -53,8 +55,3 @@
setup_irq(IRQ_TIMER0, &h7201_timer_irq);
}
-
-struct sys_timer h7201_timer = {
- .init = h7201_init_time,
- .offset = h720x_gettimeoffset,
-};
diff --git a/arch/arm/mach-h720x/cpu-h7202.c b/arch/arm/mach-h720x/cpu-h7202.c
index c37d570..e2ae7e8 100644
--- a/arch/arm/mach-h720x/cpu-h7202.c
+++ b/arch/arm/mach-h720x/cpu-h7202.c
@@ -178,8 +178,10 @@
/*
* Setup TIMER0 as system timer
*/
-void __init h7202_init_time(void)
+void __init h7202_timer_init(void)
{
+ arch_gettimeoffset = h720x_gettimeoffset;
+
CPU_REG (TIMER_VIRT, TM0_PERIOD) = LATCH;
CPU_REG (TIMER_VIRT, TM0_CTRL) = TM_RESET;
CPU_REG (TIMER_VIRT, TM0_CTRL) = TM_REPEAT | TM_START;
@@ -188,11 +190,6 @@
setup_irq(IRQ_TIMER0, &h7202_timer_irq);
}
-struct sys_timer h7202_timer = {
- .init = h7202_init_time,
- .offset = h720x_gettimeoffset,
-};
-
void __init h7202_init_irq (void)
{
int irq;
diff --git a/arch/arm/mach-h720x/h7201-eval.c b/arch/arm/mach-h720x/h7201-eval.c
index 5fdb20c..4fdeb68 100644
--- a/arch/arm/mach-h720x/h7201-eval.c
+++ b/arch/arm/mach-h720x/h7201-eval.c
@@ -32,7 +32,7 @@
.atag_offset = 0x1000,
.map_io = h720x_map_io,
.init_irq = h720x_init_irq,
- .timer = &h7201_timer,
+ .init_time = h7201_timer_init,
.dma_zone_size = SZ_256M,
.restart = h720x_restart,
MACHINE_END
diff --git a/arch/arm/mach-h720x/h7202-eval.c b/arch/arm/mach-h720x/h7202-eval.c
index 1696730..f68e967 100644
--- a/arch/arm/mach-h720x/h7202-eval.c
+++ b/arch/arm/mach-h720x/h7202-eval.c
@@ -74,7 +74,7 @@
.atag_offset = 0x100,
.map_io = h720x_map_io,
.init_irq = h7202_init_irq,
- .timer = &h7202_timer,
+ .init_time = h7202_timer_init,
.init_machine = init_eval_h7202,
.dma_zone_size = SZ_256M,
.restart = h720x_restart,
diff --git a/arch/arm/mach-h720x/include/mach/uncompress.h b/arch/arm/mach-h720x/include/mach/uncompress.h
index d662323..43e343c 100644
--- a/arch/arm/mach-h720x/include/mach/uncompress.h
+++ b/arch/arm/mach-h720x/include/mach/uncompress.h
@@ -32,6 +32,5 @@
* nothing to do
*/
#define arch_decomp_setup()
-#define arch_decomp_wdog()
#endif
diff --git a/arch/arm/mach-highbank/highbank.c b/arch/arm/mach-highbank/highbank.c
index 65656ff..a4f9f50 100644
--- a/arch/arm/mach-highbank/highbank.c
+++ b/arch/arm/mach-highbank/highbank.c
@@ -18,6 +18,7 @@
#include <linux/dma-mapping.h>
#include <linux/io.h>
#include <linux/irq.h>
+#include <linux/irqchip.h>
#include <linux/irqdomain.h>
#include <linux/of.h>
#include <linux/of_irq.h>
@@ -34,7 +35,6 @@
#include <asm/smp_twd.h>
#include <asm/hardware/arm_timer.h>
#include <asm/hardware/timer-sp.h>
-#include <asm/hardware/gic.h>
#include <asm/hardware/cache-l2x0.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
@@ -68,12 +68,6 @@
HB_JUMP_TABLE_PHYS(cpu) + 15);
}
-const static struct of_device_id irq_match[] = {
- { .compatible = "arm,cortex-a15-gic", .data = gic_of_init, },
- { .compatible = "arm,cortex-a9-gic", .data = gic_of_init, },
- {}
-};
-
#ifdef CONFIG_CACHE_L2X0
static void highbank_l2x0_disable(void)
{
@@ -84,7 +78,7 @@
static void __init highbank_init_irq(void)
{
- of_irq_init(irq_match);
+ irqchip_init();
if (of_find_compatible_node(NULL, NULL, "arm,cortex-a9"))
highbank_scu_map_io();
@@ -131,10 +125,6 @@
arch_timer_sched_clock_init();
}
-static struct sys_timer highbank_timer = {
- .init = highbank_timer_init,
-};
-
static void highbank_power_off(void)
{
highbank_set_pwr_shutdown();
@@ -211,8 +201,7 @@
.smp = smp_ops(highbank_smp_ops),
.map_io = debug_ll_io_init,
.init_irq = highbank_init_irq,
- .timer = &highbank_timer,
- .handle_irq = gic_handle_irq,
+ .init_time = highbank_timer_init,
.init_machine = highbank_init,
.dt_compat = highbank_match,
.restart = highbank_restart,
diff --git a/arch/arm/mach-highbank/platsmp.c b/arch/arm/mach-highbank/platsmp.c
index 4ecc864..8797a70 100644
--- a/arch/arm/mach-highbank/platsmp.c
+++ b/arch/arm/mach-highbank/platsmp.c
@@ -17,9 +17,9 @@
#include <linux/init.h>
#include <linux/smp.h>
#include <linux/io.h>
+#include <linux/irqchip/arm-gic.h>
#include <asm/smp_scu.h>
-#include <asm/hardware/gic.h>
#include "core.h"
@@ -33,7 +33,7 @@
static int __cpuinit highbank_boot_secondary(unsigned int cpu, struct task_struct *idle)
{
highbank_set_cpu_jump(cpu, secondary_startup);
- gic_raise_softirq(cpumask_of(cpu), 0);
+ arch_send_wakeup_ipi_mask(cpumask_of(cpu));
return 0;
}
@@ -56,8 +56,6 @@
for (i = 0; i < ncores; i++)
set_cpu_possible(i, true);
-
- set_smp_cross_call(gic_raise_softirq);
}
static void __init highbank_smp_prepare_cpus(unsigned int max_cpus)
diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
index 64b40a4..4c9c6f9 100644
--- a/arch/arm/mach-imx/Kconfig
+++ b/arch/arm/mach-imx/Kconfig
@@ -95,9 +95,6 @@
config ARCH_MX5
bool
-config ARCH_MX50
- bool
-
config ARCH_MX51
bool
@@ -164,11 +161,6 @@
select CPU_V7
select MXC_TZIC
-config SOC_IMX50
- bool
- select ARCH_MX50
- select SOC_IMX5
-
config SOC_IMX51
bool
select ARCH_MX5
@@ -738,25 +730,10 @@
if ARCH_MULTI_V7
-comment "i.MX5 platforms:"
-
-config MACH_MX50_RDP
- bool "Support MX50 reference design platform"
- depends on BROKEN
- select IMX_HAVE_PLATFORM_IMX_I2C
- select IMX_HAVE_PLATFORM_IMX_UART
- select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
- select IMX_HAVE_PLATFORM_SPI_IMX
- select SOC_IMX50
- help
- Include support for MX50 reference design platform (RDP) board. This
- includes specific configurations for the board and its peripherals.
-
comment "i.MX51 machines:"
config MACH_IMX51_DT
bool "Support i.MX51 platforms from device tree"
- select MACH_MX51_BABBAGE
select SOC_IMX51
help
Include support for Freescale i.MX51 based platforms
@@ -777,19 +754,6 @@
u-boot. This includes specific configurations for the board and its
peripherals.
-config MACH_MX51_3DS
- bool "Support MX51PDK (3DS)"
- select IMX_HAVE_PLATFORM_IMX2_WDT
- select IMX_HAVE_PLATFORM_IMX_KEYPAD
- select IMX_HAVE_PLATFORM_IMX_UART
- select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
- select IMX_HAVE_PLATFORM_SPI_IMX
- select MXC_DEBUG_BOARD
- select SOC_IMX51
- help
- Include support for MX51PDK (3DS) platform. This includes specific
- configurations for the board and its peripherals.
-
config MACH_EUKREA_CPUIMX51SD
bool "Support Eukrea CPUIMX51SD module"
select IMX_HAVE_PLATFORM_FSL_USB2_UDC
diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile
index 0634b31..240e029 100644
--- a/arch/arm/mach-imx/Makefile
+++ b/arch/arm/mach-imx/Makefile
@@ -88,7 +88,6 @@
obj-$(CONFIG_MACH_EUKREA_MBIMXSD35_BASEBOARD) += eukrea_mbimxsd35-baseboard.o
obj-$(CONFIG_MACH_VPR200) += mach-vpr200.o
-obj-$(CONFIG_DEBUG_LL) += lluart.o
obj-$(CONFIG_HAVE_IMX_GPC) += gpc.o
obj-$(CONFIG_HAVE_IMX_MMDC) += mmdc.o
obj-$(CONFIG_HAVE_IMX_SRC) += src.o
@@ -103,10 +102,8 @@
# i.MX5 based machines
obj-$(CONFIG_MACH_MX51_BABBAGE) += mach-mx51_babbage.o
-obj-$(CONFIG_MACH_MX51_3DS) += mach-mx51_3ds.o
obj-$(CONFIG_MACH_EUKREA_CPUIMX51SD) += mach-cpuimx51sd.o
obj-$(CONFIG_MACH_EUKREA_MBIMXSD51_BASEBOARD) += eukrea_mbimxsd51-baseboard.o
-obj-$(CONFIG_MACH_MX50_RDP) += mach-mx50_rdp.o
obj-$(CONFIG_MACH_IMX51_DT) += imx51-dt.o
obj-$(CONFIG_SOC_IMX53) += mach-imx53.o
diff --git a/arch/arm/mach-imx/Makefile.boot b/arch/arm/mach-imx/Makefile.boot
index b27815d..41ba1bb 100644
--- a/arch/arm/mach-imx/Makefile.boot
+++ b/arch/arm/mach-imx/Makefile.boot
@@ -22,10 +22,6 @@
params_phys-$(CONFIG_SOC_IMX35) := 0x80000100
initrd_phys-$(CONFIG_SOC_IMX35) := 0x80800000
-zreladdr-$(CONFIG_SOC_IMX50) += 0x70008000
-params_phys-$(CONFIG_SOC_IMX50) := 0x70000100
-initrd_phys-$(CONFIG_SOC_IMX50) := 0x70800000
-
zreladdr-$(CONFIG_SOC_IMX51) += 0x90008000
params_phys-$(CONFIG_SOC_IMX51) := 0x90000100
initrd_phys-$(CONFIG_SOC_IMX51) := 0x90800000
diff --git a/arch/arm/mach-imx/clk-imx6q.c b/arch/arm/mach-imx/clk-imx6q.c
index c0c4e72..19644f6 100644
--- a/arch/arm/mach-imx/clk-imx6q.c
+++ b/arch/arm/mach-imx/clk-imx6q.c
@@ -56,8 +56,6 @@
static void __iomem *ccm_base;
-void __init imx6q_clock_map_io(void) { }
-
int imx6q_set_lpm(enum mxc_cpu_pwr_mode mode)
{
u32 val = readl_relaxed(ccm_base + CLPCR);
diff --git a/arch/arm/mach-imx/common.h b/arch/arm/mach-imx/common.h
index fa36fb8..76c4200 100644
--- a/arch/arm/mach-imx/common.h
+++ b/arch/arm/mach-imx/common.h
@@ -21,7 +21,6 @@
extern void mx27_map_io(void);
extern void mx31_map_io(void);
extern void mx35_map_io(void);
-extern void mx50_map_io(void);
extern void mx51_map_io(void);
extern void mx53_map_io(void);
extern void imx1_init_early(void);
@@ -30,7 +29,6 @@
extern void imx27_init_early(void);
extern void imx31_init_early(void);
extern void imx35_init_early(void);
-extern void imx50_init_early(void);
extern void imx51_init_early(void);
extern void imx53_init_early(void);
extern void mxc_init_irq(void __iomem *);
@@ -41,7 +39,6 @@
extern void mx27_init_irq(void);
extern void mx31_init_irq(void);
extern void mx35_init_irq(void);
-extern void mx50_init_irq(void);
extern void mx51_init_irq(void);
extern void mx53_init_irq(void);
extern void imx1_soc_init(void);
@@ -50,7 +47,6 @@
extern void imx27_soc_init(void);
extern void imx31_soc_init(void);
extern void imx35_soc_init(void);
-extern void imx50_soc_init(void);
extern void imx51_soc_init(void);
extern void imx51_init_late(void);
extern void imx53_init_late(void);
@@ -109,18 +105,11 @@
#define imx27_handle_irq avic_handle_irq
#define imx31_handle_irq avic_handle_irq
#define imx35_handle_irq avic_handle_irq
-#define imx50_handle_irq tzic_handle_irq
#define imx51_handle_irq tzic_handle_irq
#define imx53_handle_irq tzic_handle_irq
-#define imx6q_handle_irq gic_handle_irq
extern void imx_enable_cpu(int cpu, bool enable);
extern void imx_set_cpu_jump(int cpu, void *jump_addr);
-#ifdef CONFIG_DEBUG_LL
-extern void imx_lluart_map_io(void);
-#else
-static inline void imx_lluart_map_io(void) {}
-#endif
extern void v7_cpu_resume(void);
extern u32 *pl310_get_save_ptr(void);
#ifdef CONFIG_SMP
@@ -139,7 +128,6 @@
extern void imx_gpc_pre_suspend(void);
extern void imx_gpc_post_resume(void);
extern int imx6q_set_lpm(enum mxc_cpu_pwr_mode mode);
-extern void imx6q_clock_map_io(void);
extern void imx_cpu_die(unsigned int cpu);
extern int imx_cpu_kill(unsigned int cpu);
diff --git a/arch/arm/mach-imx/cpu-imx5.c b/arch/arm/mach-imx/cpu-imx5.c
index d887600..d7ce722 100644
--- a/arch/arm/mach-imx/cpu-imx5.c
+++ b/arch/arm/mach-imx/cpu-imx5.c
@@ -22,7 +22,6 @@
static int mx5_cpu_rev = -1;
#define IIM_SREV 0x24
-#define MX50_HW_ADADIG_DIGPROG 0xB0
static int get_mx51_srev(void)
{
@@ -108,41 +107,3 @@
return mx5_cpu_rev;
}
EXPORT_SYMBOL(mx53_revision);
-
-static int get_mx50_srev(void)
-{
- void __iomem *anatop = ioremap(MX50_ANATOP_BASE_ADDR, SZ_8K);
- u32 rev;
-
- if (!anatop) {
- mx5_cpu_rev = -EINVAL;
- return 0;
- }
-
- rev = readl(anatop + MX50_HW_ADADIG_DIGPROG);
- rev &= 0xff;
-
- iounmap(anatop);
- if (rev == 0x0)
- return IMX_CHIP_REVISION_1_0;
- else if (rev == 0x1)
- return IMX_CHIP_REVISION_1_1;
- return 0;
-}
-
-/*
- * Returns:
- * the silicon revision of the cpu
- * -EINVAL - not a mx50
- */
-int mx50_revision(void)
-{
- if (!cpu_is_mx50())
- return -EINVAL;
-
- if (mx5_cpu_rev == -1)
- mx5_cpu_rev = get_mx50_srev();
-
- return mx5_cpu_rev;
-}
-EXPORT_SYMBOL(mx50_revision);
diff --git a/arch/arm/mach-imx/devices-imx50.h b/arch/arm/mach-imx/devices-imx50.h
deleted file mode 100644
index 2c29039..0000000
--- a/arch/arm/mach-imx/devices-imx50.h
+++ /dev/null
@@ -1,33 +0,0 @@
-/*
- * Copyright (C) 2010 Freescale Semiconductor, Inc. All Rights Reserved.
- */
-
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
-
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
-
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
- */
-
-#include "devices/devices-common.h"
-
-extern const struct imx_imx_uart_1irq_data imx50_imx_uart_data[];
-#define imx50_add_imx_uart(id, pdata) \
- imx_add_imx_uart_1irq(&imx50_imx_uart_data[id], pdata)
-
-extern const struct imx_fec_data imx50_fec_data;
-#define imx50_add_fec(pdata) \
- imx_add_fec(&imx50_fec_data, pdata)
-
-extern const struct imx_imx_i2c_data imx50_imx_i2c_data[];
-#define imx50_add_imx_i2c(id, pdata) \
- imx_add_imx_i2c(&imx50_imx_i2c_data[id], pdata)
diff --git a/arch/arm/mach-imx/devices/Kconfig b/arch/arm/mach-imx/devices/Kconfig
index 9a8f1ca..9b9ba1f 100644
--- a/arch/arm/mach-imx/devices/Kconfig
+++ b/arch/arm/mach-imx/devices/Kconfig
@@ -1,6 +1,6 @@
config IMX_HAVE_PLATFORM_FEC
bool
- default y if ARCH_MX25 || SOC_IMX27 || SOC_IMX35 || SOC_IMX50 || SOC_IMX51 || SOC_IMX53
+ default y if ARCH_MX25 || SOC_IMX27 || SOC_IMX35 || SOC_IMX51 || SOC_IMX53
config IMX_HAVE_PLATFORM_FLEXCAN
bool
diff --git a/arch/arm/mach-imx/devices/platform-fec.c b/arch/arm/mach-imx/devices/platform-fec.c
index 2cb188a..63eba08 100644
--- a/arch/arm/mach-imx/devices/platform-fec.c
+++ b/arch/arm/mach-imx/devices/platform-fec.c
@@ -35,12 +35,6 @@
imx_fec_data_entry_single(MX35, "imx27-fec");
#endif
-#ifdef CONFIG_SOC_IMX50
-/* i.mx50 has the i.mx25 type fec */
-const struct imx_fec_data imx50_fec_data __initconst =
- imx_fec_data_entry_single(MX50, "imx25-fec");
-#endif
-
#ifdef CONFIG_SOC_IMX51
/* i.mx51 has the i.mx27 type fec */
const struct imx_fec_data imx51_fec_data __initconst =
diff --git a/arch/arm/mach-imx/devices/platform-imx-i2c.c b/arch/arm/mach-imx/devices/platform-imx-i2c.c
index 8e30e57..57d342e 100644
--- a/arch/arm/mach-imx/devices/platform-imx-i2c.c
+++ b/arch/arm/mach-imx/devices/platform-imx-i2c.c
@@ -70,16 +70,6 @@
};
#endif /* ifdef CONFIG_SOC_IMX35 */
-#ifdef CONFIG_SOC_IMX50
-const struct imx_imx_i2c_data imx50_imx_i2c_data[] __initconst = {
-#define imx50_imx_i2c_data_entry(_id, _hwid) \
- imx_imx_i2c_data_entry(MX50, "imx21-i2c", _id, _hwid, SZ_4K)
- imx50_imx_i2c_data_entry(0, 1),
- imx50_imx_i2c_data_entry(1, 2),
- imx50_imx_i2c_data_entry(2, 3),
-};
-#endif /* ifdef CONFIG_SOC_IMX51 */
-
#ifdef CONFIG_SOC_IMX51
const struct imx_imx_i2c_data imx51_imx_i2c_data[] __initconst = {
#define imx51_imx_i2c_data_entry(_id, _hwid) \
diff --git a/arch/arm/mach-imx/devices/platform-imx-uart.c b/arch/arm/mach-imx/devices/platform-imx-uart.c
index 67bf866a..faac4aa 100644
--- a/arch/arm/mach-imx/devices/platform-imx-uart.c
+++ b/arch/arm/mach-imx/devices/platform-imx-uart.c
@@ -94,18 +94,6 @@
};
#endif /* ifdef CONFIG_SOC_IMX35 */
-#ifdef CONFIG_SOC_IMX50
-const struct imx_imx_uart_1irq_data imx50_imx_uart_data[] __initconst = {
-#define imx50_imx_uart_data_entry(_id, _hwid) \
- imx_imx_uart_1irq_data_entry(MX50, _id, _hwid, SZ_4K)
- imx50_imx_uart_data_entry(0, 1),
- imx50_imx_uart_data_entry(1, 2),
- imx50_imx_uart_data_entry(2, 3),
- imx50_imx_uart_data_entry(3, 4),
- imx50_imx_uart_data_entry(4, 5),
-};
-#endif /* ifdef CONFIG_SOC_IMX50 */
-
#ifdef CONFIG_SOC_IMX51
const struct imx_imx_uart_1irq_data imx51_imx_uart_data[] __initconst = {
#define imx51_imx_uart_data_entry(_id, _hwid) \
diff --git a/arch/arm/mach-imx/epit.c b/arch/arm/mach-imx/epit.c
index 04a5961..e02de18 100644
--- a/arch/arm/mach-imx/epit.c
+++ b/arch/arm/mach-imx/epit.c
@@ -178,7 +178,6 @@
static struct clock_event_device clockevent_epit = {
.name = "epit",
.features = CLOCK_EVT_FEAT_ONESHOT,
- .shift = 32,
.set_mode = epit_set_mode,
.set_next_event = epit_set_next_event,
.rating = 200,
@@ -186,18 +185,10 @@
static int __init epit_clockevent_init(struct clk *timer_clk)
{
- unsigned int c = clk_get_rate(timer_clk);
-
- clockevent_epit.mult = div_sc(c, NSEC_PER_SEC,
- clockevent_epit.shift);
- clockevent_epit.max_delta_ns =
- clockevent_delta2ns(0xfffffffe, &clockevent_epit);
- clockevent_epit.min_delta_ns =
- clockevent_delta2ns(0x800, &clockevent_epit);
-
clockevent_epit.cpumask = cpumask_of(0);
-
- clockevents_register_device(&clockevent_epit);
+ clockevents_config_and_register(&clockevent_epit,
+ clk_get_rate(timer_clk),
+ 0x800, 0xfffffffe);
return 0;
}
diff --git a/arch/arm/mach-imx/gpc.c b/arch/arm/mach-imx/gpc.c
index e1537f9..ff24920 100644
--- a/arch/arm/mach-imx/gpc.c
+++ b/arch/arm/mach-imx/gpc.c
@@ -15,7 +15,7 @@
#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/of_irq.h>
-#include <asm/hardware/gic.h>
+#include <linux/irqchip/arm-gic.h>
#define GPC_IMR1 0x008
#define GPC_PGC_CPU_PDN 0x2a0
diff --git a/arch/arm/mach-imx/hardware.h b/arch/arm/mach-imx/hardware.h
index 3ce7fa3..911e9b31 100644
--- a/arch/arm/mach-imx/hardware.h
+++ b/arch/arm/mach-imx/hardware.h
@@ -72,11 +72,6 @@
* AVIC 0x68000000+0x100000 -> 0xf5800000+0x100000
* X_MEMC 0xb8000000+0x010000 -> 0xf5c00000+0x010000
* SPBA0 0x50000000+0x100000 -> 0xf5400000+0x100000
- * mx50:
- * TZIC 0x0fffc000+0x004000 -> 0xf4bfc000+0x004000
- * AIPS1 0x53f00000+0x100000 -> 0xf5700000+0x100000
- * SPBA0 0x50000000+0x100000 -> 0xf5400000+0x100000
- * AIPS2 0x63f00000+0x100000 -> 0xf5300000+0x100000
* mx51:
* TZIC 0x0fffc000+0x004000 -> 0xf4bfc000+0x004000
* IRAM 0x1ffe0000+0x020000 -> 0xf4fe0000+0x020000
@@ -108,7 +103,6 @@
#include "mxc.h"
#include "mx6q.h"
-#include "mx50.h"
#include "mx51.h"
#include "mx53.h"
#include "mx3x.h"
diff --git a/arch/arm/mach-imx/imx25-dt.c b/arch/arm/mach-imx/imx25-dt.c
index e17dfbc..03b65e5 100644
--- a/arch/arm/mach-imx/imx25-dt.c
+++ b/arch/arm/mach-imx/imx25-dt.c
@@ -22,15 +22,6 @@
of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
}
-static void __init imx25_timer_init(void)
-{
- mx25_clocks_init_dt();
-}
-
-static struct sys_timer imx25_timer = {
- .init = imx25_timer_init,
-};
-
static const char * const imx25_dt_board_compat[] __initconst = {
"fsl,imx25",
NULL
@@ -41,7 +32,7 @@
.init_early = imx25_init_early,
.init_irq = mx25_init_irq,
.handle_irq = imx25_handle_irq,
- .timer = &imx25_timer,
+ .init_time = imx25_timer_init,
.init_machine = imx25_dt_init,
.dt_compat = imx25_dt_board_compat,
.restart = mxc_restart,
diff --git a/arch/arm/mach-imx/imx27-dt.c b/arch/arm/mach-imx/imx27-dt.c
index ebfae96..c915a49 100644
--- a/arch/arm/mach-imx/imx27-dt.c
+++ b/arch/arm/mach-imx/imx27-dt.c
@@ -39,26 +39,22 @@
imx27_auxdata_lookup, NULL);
}
-static void __init imx27_timer_init(void)
-{
- mx27_clocks_init_dt();
-}
-
-static struct sys_timer imx27_timer = {
- .init = imx27_timer_init,
-};
-
static const char * const imx27_dt_board_compat[] __initconst = {
"fsl,imx27",
NULL
};
+static void __init imx27_timer_init(void)
+{
+ mx27_clocks_init_dt();
+}
+
DT_MACHINE_START(IMX27_DT, "Freescale i.MX27 (Device Tree Support)")
.map_io = mx27_map_io,
.init_early = imx27_init_early,
.init_irq = mx27_init_irq,
.handle_irq = imx27_handle_irq,
- .timer = &imx27_timer,
+ .init_time = imx27_timer_init,
.init_machine = imx27_dt_init,
.dt_compat = imx27_dt_board_compat,
.restart = mxc_restart,
diff --git a/arch/arm/mach-imx/imx31-dt.c b/arch/arm/mach-imx/imx31-dt.c
index af476de..b5c04ee 100644
--- a/arch/arm/mach-imx/imx31-dt.c
+++ b/arch/arm/mach-imx/imx31-dt.c
@@ -38,26 +38,22 @@
imx31_auxdata_lookup, NULL);
}
-static void __init imx31_timer_init(void)
-{
- mx31_clocks_init_dt();
-}
-
-static struct sys_timer imx31_timer = {
- .init = imx31_timer_init,
-};
-
static const char *imx31_dt_board_compat[] __initdata = {
"fsl,imx31",
NULL
};
+static void __init imx31_dt_timer_init(void)
+{
+ mx31_clocks_init_dt();
+}
+
DT_MACHINE_START(IMX31_DT, "Freescale i.MX31 (Device Tree Support)")
.map_io = mx31_map_io,
.init_early = imx31_init_early,
.init_irq = mx31_init_irq,
.handle_irq = imx31_handle_irq,
- .timer = &imx31_timer,
+ .init_time = imx31_dt_timer_init,
.init_machine = imx31_dt_init,
.dt_compat = imx31_dt_board_compat,
.restart = mxc_restart,
diff --git a/arch/arm/mach-imx/imx51-dt.c b/arch/arm/mach-imx/imx51-dt.c
index 5ffa40c..e2926a8 100644
--- a/arch/arm/mach-imx/imx51-dt.c
+++ b/arch/arm/mach-imx/imx51-dt.c
@@ -24,26 +24,22 @@
of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
}
-static void __init imx51_timer_init(void)
-{
- mx51_clocks_init_dt();
-}
-
-static struct sys_timer imx51_timer = {
- .init = imx51_timer_init,
-};
-
static const char *imx51_dt_board_compat[] __initdata = {
"fsl,imx51",
NULL
};
+static void __init imx51_timer_init(void)
+{
+ mx51_clocks_init_dt();
+}
+
DT_MACHINE_START(IMX51_DT, "Freescale i.MX51 (Device Tree Support)")
.map_io = mx51_map_io,
.init_early = imx51_init_early,
.init_irq = mx51_init_irq,
.handle_irq = imx51_handle_irq,
- .timer = &imx51_timer,
+ .init_time = imx51_timer_init,
.init_machine = imx51_dt_init,
.init_late = imx51_init_late,
.dt_compat = imx51_dt_board_compat,
diff --git a/arch/arm/mach-imx/iomux-mx50.h b/arch/arm/mach-imx/iomux-mx50.h
deleted file mode 100644
index 00f56e0..0000000
--- a/arch/arm/mach-imx/iomux-mx50.h
+++ /dev/null
@@ -1,977 +0,0 @@
-/*
- * Copyright (C) 2010 Freescale Semiconductor, Inc. All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
-
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
-
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
- */
-
-#ifndef __MACH_IOMUX_MX50_H__
-#define __MACH_IOMUX_MX50_H__
-
-#include "iomux-v3.h"
-
-#define MX50_ELCDIF_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_DSE_HIGH)
-
-#define MX50_SD_PAD_CTRL (PAD_CTL_HYS | PAD_CTL_PKE | PAD_CTL_PUE | \
- PAD_CTL_PUS_47K_UP | PAD_CTL_DSE_HIGH)
-
-#define MX50_UART_PAD_CTRL (PAD_CTL_DSE_HIGH | PAD_CTL_PKE)
-
-#define MX50_I2C_PAD_CTRL (PAD_CTL_ODE | PAD_CTL_DSE_HIGH | \
- PAD_CTL_PUS_100K_UP | PAD_CTL_HYS)
-
-#define MX50_USB_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE | \
- PAD_CTL_DSE_HIGH | PAD_CTL_PUS_47K_UP)
-
-#define MX50_FEC_PAD_CTRL (PAD_CTL_HYS | PAD_CTL_PKE | PAD_CTL_PUE | \
- PAD_CTL_PUS_22K_UP | PAD_CTL_ODE | \
- PAD_CTL_DSE_HIGH)
-
-#define MX50_OWIRE_PAD_CTRL (PAD_CTL_HYS | PAD_CTL_PKE | PAD_CTL_PUE | \
- PAD_CTL_PUS_100K_UP | PAD_CTL_ODE | \
- PAD_CTL_DSE_HIGH | PAD_CTL_SRE_FAST)
-
-#define MX50_KEYPAD_CTRL (PAD_CTL_HYS | PAD_CTL_PKE | PAD_CTL_PUE | \
- PAD_CTL_PUS_100K_UP | PAD_CTL_DSE_HIGH)
-
-#define MX50_CSPI_SS_PAD (PAD_CTL_PKE | PAD_CTL_PUE | \
- PAD_CTL_PUS_22K_UP | PAD_CTL_DSE_HIGH)
-
-#define MX50_PAD_KEY_COL0__KEY_COL0 IOMUX_PAD(0x2CC, 0x20, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_KEY_COL0__GPIO_4_0 IOMUX_PAD(0x2CC, 0x20, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_KEY_COL0__NANDF_CLE IOMUX_PAD(0x2CC, 0x20, 2, 0x0, 0, PAD_CTL_DSE_HIGH)
-
-#define MX50_PAD_KEY_ROW0__KEY_ROW0 IOMUX_PAD(0x2D0, 0x24, 0, 0x0, 0, MX50_KEYPAD_CTRL)
-#define MX50_PAD_KEY_ROW0__GPIO_4_1 IOMUX_PAD(0x2D0, 0x24, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_KEY_ROW0__NANDF_ALE IOMUX_PAD(0x2D0, 0x24, 2, 0x0, 0, PAD_CTL_DSE_HIGH)
-
-#define MX50_PAD_KEY_COL1__KEY_COL1 IOMUX_PAD(0x2D4, 0x28, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_KEY_COL1__GPIO_4_2 IOMUX_PAD(0x2D4, 0x28, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_KEY_COL1__NANDF_CE0 IOMUX_PAD(0x2D4, 0x28, 2, 0x0, 0, PAD_CTL_DSE_HIGH)
-
-#define MX50_PAD_KEY_ROW1__KEY_ROW1 IOMUX_PAD(0x2D8, 0x2C, 0, 0x0, 0, MX50_KEYPAD_CTRL)
-#define MX50_PAD_KEY_ROW1__GPIO_4_3 IOMUX_PAD(0x2D8, 0x2C, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_KEY_ROW1__NANDF_CE1 IOMUX_PAD(0x2D8, 0x2C, 2, 0x0, 0, PAD_CTL_DSE_HIGH)
-
-#define MX50_PAD_KEY_COL2__KEY_COL2 IOMUX_PAD(0x2DC, 0x30, 0, 0x0, 0, MX50_KEYPAD_CTRL)
-#define MX50_PAD_KEY_COL2__GPIO_4_4 IOMUX_PAD(0x2DC, 0x30, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_KEY_COL2__NANDF_CE2 IOMUX_PAD(0x2DC, 0x30, 2, 0x0, 0, PAD_CTL_DSE_HIGH)
-
-#define MX50_PAD_KEY_ROW2__KEY_ROW2 IOMUX_PAD(0x2E0, 0x34, 0, 0x0, 0, MX50_KEYPAD_CTRL)
-#define MX50_PAD_KEY_ROW2__GPIO_4_5 IOMUX_PAD(0x2E0, 0x34, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_KEY_ROW2__NANDF_CE3 IOMUX_PAD(0x2E0, 0x34, 2, 0x0, 0, PAD_CTL_DSE_HIGH)
-
-#define MX50_PAD_KEY_COL3__KEY_COL3 IOMUX_PAD(0x2E4, 0x38, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_KEY_COL3__GPIO_4_6 IOMUX_PAD(0x2E4, 0x38, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_KEY_COL3__NANDF_READY IOMUX_PAD(0x2E4, 0x38, 2, 0x7b4, 0, PAD_CTL_PKE | \
- PAD_CTL_PUE | PAD_CTL_PUS_100K_UP)
-#define MX50_PAD_KEY_COL3__SDMA_EXT0 IOMUX_PAD(0x2E4, 0x38, 6, 0x7b8, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_KEY_ROW3__KEY_ROW3 IOMUX_PAD(0x2E8, 0x3C, 0, 0x0, 0, MX50_KEYPAD_CTRL)
-#define MX50_PAD_KEY_ROW3__GPIO_4_7 IOMUX_PAD(0x2E8, 0x3C, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_KEY_ROW3__NANDF_DQS IOMUX_PAD(0x2E8, 0x3C, 2, 0x7b0, 0, PAD_CTL_DSE_HIGH)
-#define MX50_PAD_KEY_ROW3__SDMA_EXT1 IOMUX_PAD(0x2E8, 0x3C, 6, 0x7bc, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_I2C1_SCL__I2C1_SCL IOMUX_PAD(0x2EC, 0x40, IOMUX_CONFIG_SION, 0x0, 0, \
- MX50_I2C_PAD_CTRL)
-#define MX50_PAD_I2C1_SCL__GPIO_6_18 IOMUX_PAD(0x2EC, 0x40, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_I2C1_SCL__UART2_TXD IOMUX_PAD(0x2EC, 0x40, 2, 0x0, 0, MX50_UART_PAD_CTRL)
-
-#define MX50_PAD_I2C1_SDA__I2C1_SDA IOMUX_PAD(0x2F0, 0x44, IOMUX_CONFIG_SION, 0x0, 0, \
- MX50_I2C_PAD_CTRL)
-#define MX50_PAD_I2C1_SDA__GPIO_6_19 IOMUX_PAD(0x2F0, 0x44, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_I2C1_SDA__UART2_RXD IOMUX_PAD(0x2F0, 0x44, 2, 0x7cc, 1, MX50_UART_PAD_CTRL)
-
-#define MX50_PAD_I2C2_SCL__I2C2_SCL IOMUX_PAD(0x2F4, 0x48, IOMUX_CONFIG_SION, 0x0, 0, \
- MX50_I2C_PAD_CTRL)
-#define MX50_PAD_I2C2_SCL__GPIO_6_20 IOMUX_PAD(0x2F4, 0x48, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_I2C2_SCL__UART2_CTS IOMUX_PAD(0x2F4, 0x48, 2, 0x0, 0, MX50_UART_PAD_CTRL)
-#define MX50_PAD_I2C2_SCL__DCDC_OK IOMUX_PAD(0x2F4, 0x48, 7, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_I2C2_SDA__I2C2_SDA IOMUX_PAD(0x2F8, 0x4C, IOMUX_CONFIG_SION, 0x0, 0, \
- MX50_I2C_PAD_CTRL)
-#define MX50_PAD_I2C2_SDA__GPIO_6_21 IOMUX_PAD(0x2F8, 0x4C, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_I2C2_SDA__UART2_RTS IOMUX_PAD(0x2F8, 0x4C, 2, 0x7c8, 1, MX50_UART_PAD_CTRL)
-#define MX50_PAD_I2C2_SDA__PWRSTABLE IOMUX_PAD(0x2F8, 0x4C, 7, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_I2C3_SCL__I2C3_SCL IOMUX_PAD(0x2FC, 0x50, IOMUX_CONFIG_SION, 0x0, 0, \
- MX50_I2C_PAD_CTRL)
-#define MX50_PAD_I2C3_SCL__GPIO_6_22 IOMUX_PAD(0x2FC, 0x50, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_I2C3_SCL__FEC_MDC IOMUX_PAD(0x2FC, 0x50, 2, 0x0, 0, PAD_CTL_DSE_HIGH)
-#define MX50_PAD_I2C3_SCL__PMIC_RDY IOMUX_PAD(0x2FC, 0x50, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_I2C3_SCL__GPT_CAPIN1 IOMUX_PAD(0x2FC, 0x50, 5, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_I2C3_SCL__USBOTG_OC IOMUX_PAD(0x2FC, 0x50, 7, 0x7E8, 0, MX50_USB_PAD_CTRL)
-
-#define MX50_PAD_I2C3_SDA__I2C3_SDA IOMUX_PAD(0x300, 0x54, IOMUX_CONFIG_SION, 0x0, 0, \
- MX50_I2C_PAD_CTRL)
-#define MX50_PAD_I2C3_SDA__GPIO_6_23 IOMUX_PAD(0x300, 0x54, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_I2C3_SDA__FEC_MDIO IOMUX_PAD(0x300, 0x54, 2, 0x774, 0, MX50_FEC_PAD_CTRL)
-#define MX50_PAD_I2C3_SDA__PWRFAIL_INT IOMUX_PAD(0x300, 0x54, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_I2C3_SDA__ALARM_DEB IOMUX_PAD(0x300, 0x54, 4, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_I2C3_SDA__GPT_CAPIN1 IOMUX_PAD(0x300, 0x54, 5, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_I2C3_SDA__USBOTG_PWR IOMUX_PAD(0x300, 0x54, 7, 0x0, 0, \
- PAD_CTL_PKE | PAD_CTL_DSE_HIGH)
-
-#define MX50_PAD_PWM1__PWM1_PWMO IOMUX_PAD(0x304, 0x58, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_PWM1__GPIO_6_24 IOMUX_PAD(0x304, 0x58, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_PWM1__USBOTG_OC IOMUX_PAD(0x304, 0x58, 2, 0x7E8, 1, MX50_USB_PAD_CTRL)
-#define MX50_PAD_PWM1__GPT_CMPOUT1 IOMUX_PAD(0x304, 0x58, 5, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_PWM2__PWM2_PWMO IOMUX_PAD(0x308, 0x5C, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_PWM2__GPIO_6_25 IOMUX_PAD(0x308, 0x5C, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_PWM2__USBOTG_PWR IOMUX_PAD(0x308, 0x5C, 2, 0x0, 0, \
- PAD_CTL_PKE | PAD_CTL_DSE_HIGH)
-#define MX50_PAD_PWM2__DCDC_PWM IOMUX_PAD(0x308, 0x5C, 4, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_PWM2__GPT_CMPOUT2 IOMUX_PAD(0x308, 0x5C, 5, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_PWM2__ANY_PU_RST IOMUX_PAD(0x308, 0x5C, 7, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_OWIRE__OWIRE IOMUX_PAD(0x30C, 0x60, 0, 0x0, 0, MX50_OWIRE_PAD_CTRL)
-#define MX50_PAD_OWIRE__GPIO_6_26 IOMUX_PAD(0x30C, 0x60, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_OWIRE__USBH1_OC IOMUX_PAD(0x30C, 0x60, 2, 0x0, 0, MX50_USB_PAD_CTRL)
-#define MX50_PAD_OWIRE__SSI_EXT1_CLK IOMUX_PAD(0x30C, 0x60, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_OWIRE__EPDC_PWRIRQ IOMUX_PAD(0x30C, 0x60, 4, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_OWIRE__GPT_CMPOUT3 IOMUX_PAD(0x30C, 0x60, 5, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_EPITO__EPITO IOMUX_PAD(0x310, 0x64, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPITO__GPIO_6_27 IOMUX_PAD(0x310, 0x64, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPITO__USBH1_PWR IOMUX_PAD(0x310, 0x64, 2, 0x0, 0, \
- PAD_CTL_PKE | PAD_CTL_DSE_HIGH)
-#define MX50_PAD_EPITO__SSI_EXT2_CLK IOMUX_PAD(0x310, 0x64, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPITO__TOG_EN IOMUX_PAD(0x310, 0x64, 4, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPITO__GPT_CLKIN IOMUX_PAD(0x310, 0x64, 5, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_WDOG__WDOG IOMUX_PAD(0x314, 0x68, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_WDOG__GPIO_6_28 IOMUX_PAD(0x314, 0x68, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_WDOG__WDOG_RST IOMUX_PAD(0x314, 0x68, 2, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_WDOG__XTAL32K IOMUX_PAD(0x314, 0x68, 6, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_SSI_TXFS__SSI_TXFS IOMUX_PAD(0x318, 0x6C, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_SSI_TXFS__GPIO_6_0 IOMUX_PAD(0x318, 0x6C, 1, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_SSI_TXC__SSI_TXC IOMUX_PAD(0x31C, 0x70, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_SSI_TXC__GPIO_6_1 IOMUX_PAD(0x31C, 0x70, 1, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_SSI_TXD__SSI_TXD IOMUX_PAD(0x320, 0x74, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_SSI_TXD__GPIO_6_2 IOMUX_PAD(0x320, 0x74, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_SSI_TXD__CSPI_RDY IOMUX_PAD(0x320, 0x74, 4, 0x6e8, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_SSI_RXD__SSI_RXD IOMUX_PAD(0x324, 0x78, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_SSI_RXD__GPIO_6_3 IOMUX_PAD(0x324, 0x78, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_SSI_RXD__CSPI_SS3 IOMUX_PAD(0x324, 0x78, 4, 0x6f4, 0, MX50_CSPI_SS_PAD)
-
-#define MX50_PAD_SSI_RXFS__AUD3_RXFS IOMUX_PAD(0x328, 0x7C, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_SSI_RXFS__GPIO_6_4 IOMUX_PAD(0x328, 0x7C, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_SSI_RXFS__UART5_TXD IOMUX_PAD(0x328, 0x7C, 2, 0x0, 0, MX50_UART_PAD_CTRL)
-#define MX50_PAD_SSI_RXFS__WEIM_D6 IOMUX_PAD(0x328, 0x7C, 3, 0x804, 0, NO_PAD_CTRL)
-#define MX50_PAD_SSI_RXFS__CSPI_SS2 IOMUX_PAD(0x328, 0x7C, 4, 0x6f0, 0, MX50_CSPI_SS_PAD)
-#define MX50_PAD_SSI_RXFS__FEC_COL IOMUX_PAD(0x328, 0x7C, 5, 0x770, 0, PAD_CTL_DSE_HIGH)
-#define MX50_PAD_SSI_RXFS__FEC_MDC IOMUX_PAD(0x328, 0x7C, 6, 0x0, 0, PAD_CTL_DSE_HIGH)
-
-#define MX50_PAD_SSI_RXC__AUD3_RXC IOMUX_PAD(0x32C, 0x80, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_SSI_RXC__GPIO_6_5 IOMUX_PAD(0x32C, 0x80, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_SSI_RXC__UART5_RXD IOMUX_PAD(0x32C, 0x80, 2, 0x7e4, 1, MX50_UART_PAD_CTRL)
-#define MX50_PAD_SSI_RXC__WEIM_D7 IOMUX_PAD(0x32C, 0x80, 3, 0x808, 0, NO_PAD_CTRL)
-#define MX50_PAD_SSI_RXC__CSPI_SS1 IOMUX_PAD(0x32C, 0x80, 4, 0x6ec, 0, MX50_CSPI_SS_PAD)
-#define MX50_PAD_SSI_RXC__FEC_RX_CLK IOMUX_PAD(0x32C, 0x80, 5, 0x780, 0, NO_PAD_CTRL)
-#define MX50_PAD_SSI_RXC__FEC_MDIO IOMUX_PAD(0x32C, 0x80, 6, 0x774, 1, MX50_FEC_PAD_CTRL)
-
-#define MX50_PAD_UART1_TXD__UART1_TXD IOMUX_PAD(0x330, 0x84, 0, 0x0, 0, MX50_UART_PAD_CTRL)
-#define MX50_PAD_UART1_TXD__GPIO_6_6 IOMUX_PAD(0x330, 0x84, 1, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_UART1_RXD__UART1_RXD IOMUX_PAD(0x334, 0x88, 0, 0x7c4, 1, MX50_UART_PAD_CTRL)
-#define MX50_PAD_UART1_RXD__GPIO_6_7 IOMUX_PAD(0x334, 0x88, 1, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_UART1_CTS__UART1_CTS IOMUX_PAD(0x338, 0x8C, 0, 0x0, 0, MX50_UART_PAD_CTRL)
-#define MX50_PAD_UART1_CTS__GPIO_6_8 IOMUX_PAD(0x338, 0x8C, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_UART1_CTS__UART5_TXD IOMUX_PAD(0x338, 0x8C, 2, 0x0, 0, MX50_UART_PAD_CTRL)
-#define MX50_PAD_UART1_CTS__SD4_D4 IOMUX_PAD(0x338, 0x8C, 4, 0x760, 0, MX50_SD_PAD_CTRL)
-#define MX50_PAD_UART1_CTS__SD4_CMD IOMUX_PAD(0x338, 0x8C, 5, 0x74c, 0, MX50_SD_PAD_CTRL)
-
-#define MX50_PAD_UART1_RTS__UART1_RTS IOMUX_PAD(0x33C, 0x90, 0, 0x7c0, 1, MX50_UART_PAD_CTRL)
-#define MX50_PAD_UART1_RTS__GPIO_6_9 IOMUX_PAD(0x33C, 0x90, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_UART1_RTS__UART5_RXD IOMUX_PAD(0x33C, 0x90, 2, 0x7e4, 3, MX50_UART_PAD_CTRL)
-#define MX50_PAD_UART1_RTS__SD4_D5 IOMUX_PAD(0x33C, 0x90, 4, 0x764, 0, MX50_SD_PAD_CTRL)
-#define MX50_PAD_UART1_RTS__SD4_CLK IOMUX_PAD(0x33C, 0x90, 5, 0x748, 0, MX50_SD_PAD_CTRL)
-
-#define MX50_PAD_UART2_TXD__UART2_TXD IOMUX_PAD(0x340, 0x94, 0, 0x0, 0, MX50_UART_PAD_CTRL)
-#define MX50_PAD_UART2_TXD__GPIO_6_10 IOMUX_PAD(0x340, 0x94, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_UART2_TXD__SD4_D6 IOMUX_PAD(0x340, 0x94, 4, 0x768, 0, MX50_SD_PAD_CTRL)
-#define MX50_PAD_UART2_TXD__SD4_D4 IOMUX_PAD(0x340, 0x94, 5, 0x760, 1, MX50_SD_PAD_CTRL)
-
-#define MX50_PAD_UART2_RXD__UART2_RXD IOMUX_PAD(0x344, 0x98, 0, 0x7cc, 3, MX50_UART_PAD_CTRL)
-#define MX50_PAD_UART2_RXD__GPIO_6_11 IOMUX_PAD(0x344, 0x98, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_UART2_RXD__SD4_D7 IOMUX_PAD(0x344, 0x98, 4, 0x76c, 0, MX50_SD_PAD_CTRL)
-#define MX50_PAD_UART2_RXD__SD4_D5 IOMUX_PAD(0x344, 0x98, 5, 0x764, 1, MX50_SD_PAD_CTRL)
-
-#define MX50_PAD_UART2_CTS__UART2_CTS IOMUX_PAD(0x348, 0x9C, 0, 0x0, 0, MX50_UART_PAD_CTRL)
-#define MX50_PAD_UART2_CTS__GPIO_6_12 IOMUX_PAD(0x348, 0x9C, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_UART2_CTS__SD4_CMD IOMUX_PAD(0x348, 0x9C, 4, 0x74c, 1, MX50_SD_PAD_CTRL)
-#define MX50_PAD_UART2_CTS__SD4_D6 IOMUX_PAD(0x348, 0x9C, 5, 0x768, 1, MX50_SD_PAD_CTRL)
-
-#define MX50_PAD_UART2_RTS__UART2_RTS IOMUX_PAD(0x34C, 0xA0, 0, 0x7c8, 3, MX50_UART_PAD_CTRL)
-#define MX50_PAD_UART2_RTS__GPIO_6_13 IOMUX_PAD(0x34C, 0xA0, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_UART2_RTS__SD4_CLK IOMUX_PAD(0x34C, 0xA0, 4, 0x748, 1, MX50_SD_PAD_CTRL)
-#define MX50_PAD_UART2_RTS__SD4_D7 IOMUX_PAD(0x34C, 0xA0, 5, 0x76c, 1, MX50_SD_PAD_CTRL)
-
-#define MX50_PAD_UART3_TXD__UART3_TXD IOMUX_PAD(0x350, 0xA4, 0, 0x0, 0, MX50_UART_PAD_CTRL)
-#define MX50_PAD_UART3_TXD__GPIO_6_14 IOMUX_PAD(0x350, 0xA4, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_UART3_TXD__SD1_D4 IOMUX_PAD(0x350, 0xA4, 3, 0x0, 0, MX50_SD_PAD_CTRL)
-#define MX50_PAD_UART3_TXD__SD4_D0 IOMUX_PAD(0x350, 0xA4, 4, 0x750, 0, MX50_SD_PAD_CTRL)
-#define MX50_PAD_UART3_TXD__SD2_WP IOMUX_PAD(0x350, 0xA4, 5, 0x744, 0, MX50_SD_PAD_CTRL)
-#define MX50_PAD_UART3_TXD__WEIM_D12 IOMUX_PAD(0x350, 0xA4, 6, 0x81c, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_UART3_RXD__UART3_RXD IOMUX_PAD(0x354, 0xA8, 0, 0x7d4, 1, MX50_UART_PAD_CTRL)
-#define MX50_PAD_UART3_RXD__GPIO_6_15 IOMUX_PAD(0x354, 0xA8, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_UART3_RXD__SD1_D5 IOMUX_PAD(0x354, 0xA8, 3, 0x0, 0, MX50_SD_PAD_CTRL)
-#define MX50_PAD_UART3_RXD__SD4_D1 IOMUX_PAD(0x354, 0xA8, 4, 0x754, 0, MX50_SD_PAD_CTRL)
-#define MX50_PAD_UART3_RXD__SD2_CD IOMUX_PAD(0x354, 0xA8, 5, 0x740, 0, MX50_SD_PAD_CTRL)
-#define MX50_PAD_UART3_RXD__WEIM_D13 IOMUX_PAD(0x354, 0xA8, 6, 0x820, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_UART4_TXD__UART4_TXD IOMUX_PAD(0x358, 0xAC, 0, 0x0, 0, MX50_UART_PAD_CTRL)
-#define MX50_PAD_UART4_TXD__GPIO_6_16 IOMUX_PAD(0x358, 0xAC, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_UART4_TXD__UART3_CTS IOMUX_PAD(0x358, 0xAC, 2, 0x0, 0, MX50_UART_PAD_CTRL)
-#define MX50_PAD_UART4_TXD__SD1_D6 IOMUX_PAD(0x358, 0xAC, 3, 0x0, 0, MX50_SD_PAD_CTRL)
-#define MX50_PAD_UART4_TXD__SD4_D2 IOMUX_PAD(0x358, 0xAC, 4, 0x758, 0, MX50_SD_PAD_CTRL)
-#define MX50_PAD_UART4_TXD__SD2_LCTL IOMUX_PAD(0x358, 0xAC, 5, 0x0, 0, MX50_SD_PAD_CTRL)
-#define MX50_PAD_UART4_TXD__WEIM_D14 IOMUX_PAD(0x358, 0xAC, 6, 0x824, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_UART4_RXD__UART4_RXD IOMUX_PAD(0x35C, 0xB0, 0, 0x7dc, 1, MX50_UART_PAD_CTRL)
-#define MX50_PAD_UART4_RXD__GPIO_6_17 IOMUX_PAD(0x35C, 0xB0, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_UART4_RXD__UART3_RTS IOMUX_PAD(0x35C, 0xB0, 2, 0x7d0, 1, MX50_UART_PAD_CTRL)
-#define MX50_PAD_UART4_RXD__SD1_D7 IOMUX_PAD(0x35C, 0xB0, 3, 0x0, 0, MX50_SD_PAD_CTRL)
-#define MX50_PAD_UART4_RXD__SD4_D3 IOMUX_PAD(0x35C, 0xB0, 4, 0x75c, 0, MX50_SD_PAD_CTRL)
-#define MX50_PAD_UART4_RXD__SD1_LCTL IOMUX_PAD(0x35C, 0xB0, 5, 0x0, 0, MX50_SD_PAD_CTRL)
-#define MX50_PAD_UART4_RXD__WEIM_D15 IOMUX_PAD(0x35C, 0xB0, 6, 0x828, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_CSPI_SCLK__CSPI_SCLK IOMUX_PAD(0x360, 0xB4, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_CSPI_SCLK__GPIO_4_8 IOMUX_PAD(0x360, 0xB4, 1, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_CSPI_MOSI__CSPI_MOSI IOMUX_PAD(0x364, 0xB8, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_CSPI_MOSI__GPIO_4_9 IOMUX_PAD(0x364, 0xB8, 1, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_CSPI_MISO__CSPI_MISO IOMUX_PAD(0x368, 0xBC, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_CSPI_MISO__GPIO_4_10 IOMUX_PAD(0x368, 0xBC, 1, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_CSPI_SS0__CSPI_SS0 IOMUX_PAD(0x36C, 0xC0, 0, 0x0, 0, MX50_CSPI_SS_PAD)
-#define MX50_PAD_CSPI_SS0__GPIO_4_11 IOMUX_PAD(0x36C, 0xC0, 1, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_ECSPI1_SCLK__ECSPI1_SCLK IOMUX_PAD(0x370, 0xC4, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_ECSPI1_SCLK__GPIO_4_12 IOMUX_PAD(0x370, 0xC4, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_ECSPI1_SCLK__CSPI_RDY IOMUX_PAD(0x370, 0xC4, 2, 0x6e8, 1, NO_PAD_CTRL)
-#define MX50_PAD_ECSPI1_SCLK__ECSPI2_RDY IOMUX_PAD(0x370, 0xC4, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_ECSPI1_SCLK__UART3_RTS IOMUX_PAD(0x370, 0xC4, 4, 0x7d0, 2, MX50_UART_PAD_CTRL)
-#define MX50_PAD_ECSPI1_SCLK__EPDC_SDCE6 IOMUX_PAD(0x370, 0xC4, 5, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_ECSPI1_SCLK__WEIM_D8 IOMUX_PAD(0x370, 0xC4, 7, 0x80c, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_ECSPI1_MOSI__ECSPI1_MOSI IOMUX_PAD(0x374, 0xC8, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_ECSPI1_MOSI__GPIO_4_13 IOMUX_PAD(0x374, 0xC8, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_ECSPI1_MOSI__CSPI_SS1 IOMUX_PAD(0x374, 0xC8, 2, 0x6ec, 1, MX50_CSPI_SS_PAD)
-#define MX50_PAD_ECSPI1_MOSI__ECSPI2_SS1 IOMUX_PAD(0x374, 0xC8, 3, 0x0, 0, MX50_CSPI_SS_PAD)
-#define MX50_PAD_ECSPI1_MOSI__UART3_CTS IOMUX_PAD(0x374, 0xC8, 4, 0x0, 0, MX50_UART_PAD_CTRL)
-#define MX50_PAD_ECSPI1_MOSI__EPDC_SDCE7 IOMUX_PAD(0x374, 0xC8, 5, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_ECSPI1_MOSI__WEIM_D9 IOMUX_PAD(0x374, 0xC8, 7, 0x810, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_ECSPI1_MISO__ECSPI1_MISO IOMUX_PAD(0x378, 0xCC, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_ECSPI1_MISO__GPIO_4_14 IOMUX_PAD(0x378, 0xCC, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_ECSPI1_MISO__CSPI_SS2 IOMUX_PAD(0x378, 0xCC, 2, 0x6f0, 1, MX50_CSPI_SS_PAD)
-#define MX50_PAD_ECSPI1_MISO__ECSPI2_SS2 IOMUX_PAD(0x378, 0xCC, 3, 0x0, 0, MX50_CSPI_SS_PAD)
-#define MX50_PAD_ECSPI1_MISO__UART4_RTS IOMUX_PAD(0x378, 0xCC, 4, 0x7d8, 0, MX50_UART_PAD_CTRL)
-#define MX50_PAD_ECSPI1_MISO__EPDC_SDCE8 IOMUX_PAD(0x378, 0xCC, 5, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_ECSPI1_MISO__WEIM_D10 IOMUX_PAD(0x378, 0xCC, 7, 0x814, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_ECSPI1_SS0__ECSPI1_SS0 IOMUX_PAD(0x37C, 0xD0, 0, 0x0, 0, MX50_CSPI_SS_PAD)
-#define MX50_PAD_ECSPI1_SS0__GPIO_4_15 IOMUX_PAD(0x37C, 0xD0, 1, 0x0, 0, PAD_CTL_PUS_100K_UP)
-#define MX50_PAD_ECSPI1_SS0__CSPI_SS3 IOMUX_PAD(0x37C, 0xD0, 2, 0x6f4, 1, MX50_CSPI_SS_PAD)
-#define MX50_PAD_ECSPI1_SS0__ECSPI2_SS3 IOMUX_PAD(0x37C, 0xD0, 3, 0x0, 0, MX50_CSPI_SS_PAD)
-#define MX50_PAD_ECSPI1_SS0__UART4_CTS IOMUX_PAD(0x37C, 0xD0, 4, 0x0, 0, MX50_UART_PAD_CTRL)
-#define MX50_PAD_ECSPI1_SS0__EPDC_SDCE9 IOMUX_PAD(0x37C, 0xD0, 5, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_ECSPI1_SS0__WEIM_D11 IOMUX_PAD(0x37C, 0xD0, 7, 0x818, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_ECSPI2_SCLK__ECSPI2_SCLK IOMUX_PAD(0x380, 0xD4, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_ECSPI2_SCLK__GPIO_4_16 IOMUX_PAD(0x380, 0xD4, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_ECSPI2_SCLK__ELCDIF_WR IOMUX_PAD(0x380, 0xD4, 2, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_ECSPI2_SCLK__ECSPI1_RDY IOMUX_PAD(0x380, 0xD4, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_ECSPI2_SCLK__UART5_RTS IOMUX_PAD(0x380, 0xD4, 4, 0x7e0, 0, MX50_UART_PAD_CTRL)
-#define MX50_PAD_ECSPI2_SCLK__ELCDIF_DOTCLK IOMUX_PAD(0x380, 0xD4, 5, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_ECSPI2_SCLK__NANDF_CEN4 IOMUX_PAD(0x380, 0xD4, 6, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_ECSPI2_SCLK__WEIM_D8 IOMUX_PAD(0x380, 0xD4, 7, 0x80c, 1, NO_PAD_CTRL)
-
-#define MX50_PAD_ECSPI2_MOSI__ECSPI2_MOSI IOMUX_PAD(0x384, 0xD8, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_ECSPI2_MOSI__GPIO_4_17 IOMUX_PAD(0x384, 0xD8, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_ECSPI2_MOSI__ELCDIF_RD IOMUX_PAD(0x384, 0xD8, 2, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_ECSPI2_MOSI__ECSPI1_SS1 IOMUX_PAD(0x384, 0xD8, 3, 0x0, 0, MX50_CSPI_SS_PAD)
-#define MX50_PAD_ECSPI2_MOSI__UART5_CTS IOMUX_PAD(0x384, 0xD8, 4, 0x0, 0, MX50_UART_PAD_CTRL)
-#define MX50_PAD_ECSPI2_MOSI__ELCDIF_EN IOMUX_PAD(0x384, 0xD8, 5, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_ECSPI2_MOSI__NANDF_CEN5 IOMUX_PAD(0x384, 0xD8, 6, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_ECSPI2_MOSI__WEIM_D9 IOMUX_PAD(0x384, 0xD8, 7, 0x810, 1, NO_PAD_CTRL)
-
-#define MX50_PAD_ECSPI2_MISO__ECSPI2_MISO IOMUX_PAD(0x388, 0xDC, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_ECSPI2_MISO__GPIO_4_18 IOMUX_PAD(0x388, 0xDC, 1, 0x0, 0, PAD_CTL_PUS_100K_UP)
-#define MX50_PAD_ECSPI2_MISO__ELCDIF_RS IOMUX_PAD(0x388, 0xDC, 2, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_ECSPI2_MISO__ECSPI1_SS2 IOMUX_PAD(0x388, 0xDC, 3, 0x0, 0, MX50_CSPI_SS_PAD)
-#define MX50_PAD_ECSPI2_MISO__UART5_TXD IOMUX_PAD(0x388, 0xDC, 4, 0x0, 0, MX50_UART_PAD_CTRL)
-#define MX50_PAD_ECSPI2_MISO__ELCDIF_VSYNC IOMUX_PAD(0x388, 0xDC, 5, 0x73c, 0, NO_PAD_CTRL)
-#define MX50_PAD_ECSPI2_MISO__NANDF_CEN6 IOMUX_PAD(0x388, 0xDC, 6, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_ECSPI2_MISO__WEIM_D10 IOMUX_PAD(0x388, 0xDC, 7, 0x814, 1, NO_PAD_CTRL)
-
-#define MX50_PAD_ECSPI2_SS0__ECSPI2_SS0 IOMUX_PAD(0x38C, 0xE0, 0, 0x0, 0, MX50_CSPI_SS_PAD)
-#define MX50_PAD_ECSPI2_SS0__GPIO_4_19 IOMUX_PAD(0x38C, 0xE0, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_ECSPI2_SS0__ELCDIF_CS IOMUX_PAD(0x38C, 0xE0, 2, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_ECSPI2_SS0__ECSPI1_SS3 IOMUX_PAD(0x38C, 0xE0, 3, 0x0, 0, MX50_CSPI_SS_PAD)
-#define MX50_PAD_ECSPI2_SS0__UART5_RXD IOMUX_PAD(0x38C, 0xE0, 4, 0x7e4, 5, MX50_UART_PAD_CTRL)
-#define MX50_PAD_ECSPI2_SS0__ELCDIF_HSYNC IOMUX_PAD(0x38C, 0xE0, 5, 0x6f8, 0, NO_PAD_CTRL)
-#define MX50_PAD_ECSPI2_SS0__NANDF_CEN7 IOMUX_PAD(0x38C, 0xE0, 6, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_ECSPI2_SS0__WEIM_D11 IOMUX_PAD(0x38C, 0xE0, 7, 0x818, 1, NO_PAD_CTRL)
-
-#define MX50_PAD_SD1_CLK__SD1_CLK IOMUX_PAD(0x390, 0xE4, IOMUX_CONFIG_SION, 0x0, 0, MX50_SD_PAD_CTRL)
-#define MX50_PAD_SD1_CLK__GPIO_5_0 IOMUX_PAD(0x390, 0xE4, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_SD1_CLK__CLKO IOMUX_PAD(0x390, 0xE4, 7, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_SD1_CMD__SD1_CMD IOMUX_PAD(0x394, 0xE8, IOMUX_CONFIG_SION, 0x0, 0, MX50_SD_PAD_CTRL)
-#define MX50_PAD_SD1_CMD__GPIO_5_1 IOMUX_PAD(0x394, 0xE8, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_SD1_CMD__CLKO2 IOMUX_PAD(0x394, 0xE8, 7, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_SD1_D0__SD1_D0 IOMUX_PAD(0x398, 0xEC, 0, 0x0, 0, MX50_SD_PAD_CTRL)
-#define MX50_PAD_SD1_D0__GPIO_5_2 IOMUX_PAD(0x398, 0xEC, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_SD1_D0__PLL1_BYP IOMUX_PAD(0x398, 0xEC, 7, 0x6dc, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_SD1_D1__SD1_D1 IOMUX_PAD(0x39C, 0xF0, 0, 0x0, 0, MX50_SD_PAD_CTRL)
-#define MX50_PAD_SD1_D1__GPIO_5_3 IOMUX_PAD(0x39C, 0xF0, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_SD1_D1__PLL2_BYP IOMUX_PAD(0x39C, 0xF0, 7, 0x6e0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_SD1_D2__SD1_D2 IOMUX_PAD(0x3A0, 0xF4, 0, 0x0, 0, MX50_SD_PAD_CTRL)
-#define MX50_PAD_SD1_D2__GPIO_5_4 IOMUX_PAD(0x3A0, 0xF4, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_SD1_D2__PLL3_BYP IOMUX_PAD(0x3A0, 0xF4, 7, 0x6e4, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_SD1_D3__SD1_D3 IOMUX_PAD(0x3A4, 0xF8, 0, 0x0, 0, MX50_SD_PAD_CTRL)
-#define MX50_PAD_SD1_D3__GPIO_5_5 IOMUX_PAD(0x3A4, 0xF8, 1, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_SD2_CLK__SD2_CLK IOMUX_PAD(0x3A8, 0xFC, IOMUX_CONFIG_SION, 0x0, 0, MX50_SD_PAD_CTRL)
-#define MX50_PAD_SD2_CLK__GPIO_5_6 IOMUX_PAD(0x3A8, 0xFC, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_SD2_CLK__MSHC_SCLK IOMUX_PAD(0x3A8, 0xFC, 2, 0x0, 0, MX50_SD_PAD_CTRL)
-
-#define MX50_PAD_SD2_CMD__SD2_CMD IOMUX_PAD(0x3AC, 0x100, IOMUX_CONFIG_SION, 0x0, 0, MX50_SD_PAD_CTRL)
-#define MX50_PAD_SD2_CMD__GPIO_5_7 IOMUX_PAD(0x3AC, 0x100, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_SD2_CMD__MSHC_BS IOMUX_PAD(0x3AC, 0x100, 2, 0x0, 0, MX50_SD_PAD_CTRL)
-
-#define MX50_PAD_SD2_D0__SD2_D0 IOMUX_PAD(0x3B0, 0x104, 0, 0x0, 0, MX50_SD_PAD_CTRL)
-#define MX50_PAD_SD2_D0__GPIO_5_8 IOMUX_PAD(0x3B0, 0x104, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_SD2_D0__MSHC_D0 IOMUX_PAD(0x3B0, 0x104, 2, 0x0, 0, MX50_SD_PAD_CTRL)
-#define MX50_PAD_SD2_D0__KEY_COL4 IOMUX_PAD(0x3B0, 0x104, 3, 0x790, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_SD2_D1__SD2_D1 IOMUX_PAD(0x3B4, 0x108, 0, 0x0, 0, MX50_SD_PAD_CTRL)
-#define MX50_PAD_SD2_D1__GPIO_5_9 IOMUX_PAD(0x3B4, 0x108, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_SD2_D1__MSHC_D1 IOMUX_PAD(0x3B4, 0x108, 2, 0x0, 0, MX50_SD_PAD_CTRL)
-#define MX50_PAD_SD2_D1__KEY_ROW4 IOMUX_PAD(0x3B4, 0x108, 3, 0x7a0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_SD2_D2__SD2_D2 IOMUX_PAD(0x3B8, 0x10C, 0, 0x0, 0, MX50_SD_PAD_CTRL)
-#define MX50_PAD_SD2_D2__GPIO_5_10 IOMUX_PAD(0x3B8, 0x10C, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_SD2_D2__MSHC_D2 IOMUX_PAD(0x3B8, 0x10C, 2, 0x0, 0, MX50_SD_PAD_CTRL)
-#define MX50_PAD_SD2_D2__KEY_COL5 IOMUX_PAD(0x3B8, 0x10C, 3, 0x794, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_SD2_D3__SD2_D3 IOMUX_PAD(0x3BC, 0x110, 0, 0x0, 0, MX50_SD_PAD_CTRL)
-#define MX50_PAD_SD2_D3__GPIO_5_11 IOMUX_PAD(0x3BC, 0x110, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_SD2_D3__MSHC_D3 IOMUX_PAD(0x3BC, 0x110, 2, 0x0, 0, MX50_SD_PAD_CTRL)
-#define MX50_PAD_SD2_D3__KEY_ROW5 IOMUX_PAD(0x3BC, 0x110, 3, 0x7a4, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_SD2_D4__SD2_D4 IOMUX_PAD(0x3C0, 0x114, 0, 0x0, 0, MX50_SD_PAD_CTRL)
-#define MX50_PAD_SD2_D4__GPIO_5_12 IOMUX_PAD(0x3C0, 0x114, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_SD2_D4__AUD4_RXFS IOMUX_PAD(0x3C0, 0x114, 2, 0x6d0, 0, NO_PAD_CTRL)
-#define MX50_PAD_SD2_D4__KEY_COL6 IOMUX_PAD(0x3C0, 0x114, 3, 0x798, 0, NO_PAD_CTRL)
-#define MX50_PAD_SD2_D4__WEIM_D0 IOMUX_PAD(0x3C0, 0x114, 4, 0x7ec, 0, NO_PAD_CTRL)
-#define MX50_PAD_SD2_D4__CCM_OUT0 IOMUX_PAD(0x3C0, 0x114, 7, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_SD2_D5__SD2_D5 IOMUX_PAD(0x3C4, 0x118, 0, 0x0, 0, MX50_SD_PAD_CTRL)
-#define MX50_PAD_SD2_D5__GPIO_5_13 IOMUX_PAD(0x3C4, 0x118, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_SD2_D5__AUD4_RXC IOMUX_PAD(0x3C4, 0x118, 2, 0x6cc, 0, NO_PAD_CTRL)
-#define MX50_PAD_SD2_D5__KEY_ROW6 IOMUX_PAD(0x3C4, 0x118, 3, 0x7a8, 0, NO_PAD_CTRL)
-#define MX50_PAD_SD2_D5__WEIM_D1 IOMUX_PAD(0x3C4, 0x118, 4, 0x7f0, 0, NO_PAD_CTRL)
-#define MX50_PAD_SD2_D5__CCM_OUT1 IOMUX_PAD(0x3C4, 0x118, 7, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_SD2_D6__SD2_D6 IOMUX_PAD(0x3C8, 0x11C, 0, 0x0, 0, MX50_SD_PAD_CTRL)
-#define MX50_PAD_SD2_D6__GPIO_5_14 IOMUX_PAD(0x3C8, 0x11C, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_SD2_D6__AUD4_RXD IOMUX_PAD(0x3C8, 0x11C, 2, 0x6c4, 0, NO_PAD_CTRL)
-#define MX50_PAD_SD2_D6__KEY_COL7 IOMUX_PAD(0x3C8, 0x11C, 3, 0x79c, 0, NO_PAD_CTRL)
-#define MX50_PAD_SD2_D6__WEIM_D2 IOMUX_PAD(0x3C8, 0x11C, 4, 0x7f4, 0, NO_PAD_CTRL)
-#define MX50_PAD_SD2_D6__CCM_OUT2 IOMUX_PAD(0x3C8, 0x11C, 7, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_SD2_D7__SD2_D7 IOMUX_PAD(0x3CC, 0x120, 0, 0x0, 0, MX50_SD_PAD_CTRL)
-#define MX50_PAD_SD2_D7__GPIO_5_15 IOMUX_PAD(0x3CC, 0x120, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_SD2_D7__AUD4_TXFS IOMUX_PAD(0x3CC, 0x120, 2, 0x6d8, 0, NO_PAD_CTRL)
-#define MX50_PAD_SD2_D7__KEY_ROW7 IOMUX_PAD(0x3CC, 0x120, 3, 0x7ac, 0, NO_PAD_CTRL)
-#define MX50_PAD_SD2_D7__WEIM_D3 IOMUX_PAD(0x3CC, 0x120, 4, 0x7f8, 0, NO_PAD_CTRL)
-#define MX50_PAD_SD2_D7__CCM_STOP IOMUX_PAD(0x3CC, 0x120, 7, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_SD2_WP__SD2_WP IOMUX_PAD(0x3D0, 0x124, 0, 0x744, 1, MX50_SD_PAD_CTRL)
-#define MX50_PAD_SD2_WP__GPIO_5_16 IOMUX_PAD(0x3D0, 0x124, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_SD2_WP__AUD4_TXD IOMUX_PAD(0x3D0, 0x124, 2, 0x6c8, 0, NO_PAD_CTRL)
-#define MX50_PAD_SD2_WP__WEIM_D4 IOMUX_PAD(0x3D0, 0x124, 4, 0x7fc, 0, NO_PAD_CTRL)
-#define MX50_PAD_SD2_WP__CCM_WAIT IOMUX_PAD(0x3D0, 0x124, 7, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_SD2_CD__SD2_CD IOMUX_PAD(0x3D4, 0x128, 0, 0x740, 1, MX50_SD_PAD_CTRL)
-#define MX50_PAD_SD2_CD__GPIO_5_17 IOMUX_PAD(0x3D4, 0x128, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_SD2_CD__AUD4_TXC IOMUX_PAD(0x3D4, 0x128, 2, 0x6d4, 0, NO_PAD_CTRL)
-#define MX50_PAD_SD2_CD__WEIM_D5 IOMUX_PAD(0x3D4, 0x128, 4, 0x800, 0, NO_PAD_CTRL)
-#define MX50_PAD_SD2_CD__CCM_REF_EN IOMUX_PAD(0x3D4, 0x128, 7, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_PMIC_ON_REQ__PMIC_ON_REQ IOMUX_PAD(0x3D8, 0, 0, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_PMIC_STBY_REQ__PMIC_STBY_REQ IOMUX_PAD(0x3DC, 0, 0, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_PMIC_PORT_B__PMIC_PORT_B IOMUX_PAD(0x3E0, 0, 0, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_PMIC_BOOT_MODE1__PMIC_BOOT_MODE1 IOMUX_PAD(0x3E4, 0, 0, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_PMIC_RESET_IN_B__PMIC_RESET_IN_B IOMUX_PAD(0x3E8, 0, 0, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_PMIC_BOOT_MODE0__PMIC_BOOT_MODE0 IOMUX_PAD(0x3EC, 0, 0, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_PMIC_TEST_MODE__PMIC_TEST_MODE IOMUX_PAD(0x3F0, 0, 0, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_PMIC_JTAG_TMS__PMIC_JTAG_TMS IOMUX_PAD(0x3F4, 0, 0, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_PMIC_JTAG_MOD__PMIC_JTAG_MOD IOMUX_PAD(0x3F8, 0, 0, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_PMIC_JTAG_TRSTB__PMIC_JTAG_TRSTB IOMUX_PAD(0x3FC, 0, 0, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_PMIC_JTAG_TDI__PMIC_JTAG_TDI IOMUX_PAD(0x400, 0, 0, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_PMIC_JTAG_TCK__PMIC_JTAG_TCK IOMUX_PAD(0x404, 0, 0, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_PMIC_JTAG_TDO__PMIC_JTAG_TDO IOMUX_PAD(0x408, 0, 0, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_DISP_D0__DISP_D0 IOMUX_PAD(0x40C, 0x12C, 0, 0x6fc, 0, MX50_ELCDIF_PAD_CTRL)
-#define MX50_PAD_DISP_D0__GPIO_2_0 IOMUX_PAD(0x40C, 0x12C, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_DISP_D0__FEC_TXCLK IOMUX_PAD(0x40C, 0x12C, 2, 0x78c, 0, PAD_CTL_HYS | PAD_CTL_PKE)
-
-#define MX50_PAD_DISP_D1__DISP_D1 IOMUX_PAD(0x410, 0x130, 0, 0x700, 0, MX50_ELCDIF_PAD_CTRL)
-#define MX50_PAD_DISP_D1__GPIO_2_1 IOMUX_PAD(0x410, 0x130, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_DISP_D1__FEC_RX_ER IOMUX_PAD(0x410, 0x130, 2, 0x788, 0, PAD_CTL_HYS | PAD_CTL_PKE)
-#define MX50_PAD_DISP_D1__WEIM_A17 IOMUX_PAD(0x410, 0x130, 3, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_DISP_D2__DISP_D2 IOMUX_PAD(0x414, 0x134, 0, 0x704, 0, MX50_ELCDIF_PAD_CTRL)
-#define MX50_PAD_DISP_D2__GPIO_2_2 IOMUX_PAD(0x414, 0x134, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_DISP_D2__FEC_RX_DV IOMUX_PAD(0x414, 0x134, 2, 0x784, 0, PAD_CTL_HYS | PAD_CTL_PKE)
-#define MX50_PAD_DISP_D2__WEIM_A18 IOMUX_PAD(0x414, 0x134, 3, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_DISP_D3__DISP_D3 IOMUX_PAD(0x418, 0x138, 0, 0x708, 0, MX50_ELCDIF_PAD_CTRL)
-#define MX50_PAD_DISP_D3__GPIO_2_3 IOMUX_PAD(0x418, 0x138, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_DISP_D3__FEC_RXD1 IOMUX_PAD(0x418, 0x138, 2, 0x77C, 0, PAD_CTL_HYS | PAD_CTL_PKE)
-#define MX50_PAD_DISP_D3__WEIM_A19 IOMUX_PAD(0x418, 0x138, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_DISP_D3__FEC_COL IOMUX_PAD(0x418, 0x138, 4, 0x770, 1, NO_PAD_CTRL)
-
-#define MX50_PAD_DISP_D4__DISP_D4 IOMUX_PAD(0x41C, 0x13C, 0, 0x70c, 0, MX50_ELCDIF_PAD_CTRL)
-#define MX50_PAD_DISP_D4__GPIO_2_4 IOMUX_PAD(0x41C, 0x13C, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_DISP_D4__FEC_RXD0 IOMUX_PAD(0x41C, 0x13C, 2, 0x778, 0, PAD_CTL_HYS | PAD_CTL_PKE)
-#define MX50_PAD_DISP_D4__WEIM_A20 IOMUX_PAD(0x41C, 0x13C, 3, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_DISP_D5__DISP_D5 IOMUX_PAD(0x420, 0x140, 0, 0x710, 0, MX50_ELCDIF_PAD_CTRL)
-#define MX50_PAD_DISP_D5__GPIO_2_5 IOMUX_PAD(0x420, 0x140, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_DISP_D5__FEC_TX_EN IOMUX_PAD(0x420, 0x140, 2, 0x0, 0, PAD_CTL_DSE_HIGH)
-#define MX50_PAD_DISP_D5__WEIM_A21 IOMUX_PAD(0x420, 0x140, 3, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_DISP_D6__DISP_D6 IOMUX_PAD(0x424, 0x144, 0, 0x714, 0, MX50_ELCDIF_PAD_CTRL)
-#define MX50_PAD_DISP_D6__GPIO_2_6 IOMUX_PAD(0x424, 0x144, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_DISP_D6__FEC_TXD1 IOMUX_PAD(0x424, 0x144, 2, 0x0, 0, PAD_CTL_DSE_HIGH)
-#define MX50_PAD_DISP_D6__WEIM_A22 IOMUX_PAD(0x424, 0x144, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_DISP_D6__FEC_RX_CLK IOMUX_PAD(0x424, 0x144, 4, 0x780, 1, NO_PAD_CTRL)
-
-#define MX50_PAD_DISP_D7__DISP_D7 IOMUX_PAD(0x428, 0x148, 0, 0x718, 0, MX50_ELCDIF_PAD_CTRL)
-#define MX50_PAD_DISP_D7__GPIO_2_7 IOMUX_PAD(0x428, 0x148, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_DISP_D7__FEC_TXD0 IOMUX_PAD(0x428, 0x148, 2, 0x0, 0, PAD_CTL_DSE_HIGH)
-#define MX50_PAD_DISP_D7__WEIM_A23 IOMUX_PAD(0x428, 0x148, 3, 0x0, 0, NO_PAD_CTRL)
-
-
-#define MX50_PAD_DISP_WR__ELCDIF_WR IOMUX_PAD(0x42C, 0x14C, 0, 0x0, 0, MX50_ELCDIF_PAD_CTRL)
-#define MX50_PAD_DISP_WR__GPIO_2_16 IOMUX_PAD(0x42C, 0x14C, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_DISP_WR__ELCDIF_PIXCLK IOMUX_PAD(0x42C, 0x14C, 2, 0x0, 0, MX50_ELCDIF_PAD_CTRL)
-#define MX50_PAD_DISP_WR__WEIM_A24 IOMUX_PAD(0x42C, 0x14C, 3, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_DISP_RD__ELCDIF_RD IOMUX_PAD(0x430, 0x150, 0, 0x0, 0, MX50_ELCDIF_PAD_CTRL)
-#define MX50_PAD_DISP_RD__GPIO_2_19 IOMUX_PAD(0x430, 0x150, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_DISP_RD__ELCDIF_EN IOMUX_PAD(0x430, 0x150, 2, 0x0, 0, MX50_ELCDIF_PAD_CTRL)
-#define MX50_PAD_DISP_RD__WEIM_A25 IOMUX_PAD(0x430, 0x150, 3, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_DISP_RS__ELCDIF_RS IOMUX_PAD(0x434, 0x154, 0, 0x0, 0, MX50_ELCDIF_PAD_CTRL)
-#define MX50_PAD_DISP_RS__GPIO_2_17 IOMUX_PAD(0x434, 0x154, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_DISP_RS__ELCDIF_VSYNC IOMUX_PAD(0x434, 0x154, 2, 0x73c, 1, MX50_ELCDIF_PAD_CTRL)
-#define MX50_PAD_DISP_RS__WEIM_A26 IOMUX_PAD(0x434, 0x154, 3, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_DISP_CS__ELCDIF_CS IOMUX_PAD(0x438, 0x158, 0, 0x0, 0, MX50_ELCDIF_PAD_CTRL)
-#define MX50_PAD_DISP_CS__GPIO_2_21 IOMUX_PAD(0x438, 0x158, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_DISP_CS__ELCDIF_HSYNC IOMUX_PAD(0x438, 0x158, 2, 0x6f8, 1, MX50_ELCDIF_PAD_CTRL)
-#define MX50_PAD_DISP_CS__WEIM_A27 IOMUX_PAD(0x438, 0x158, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_DISP_CS__WEIM_CS3 IOMUX_PAD(0x438, 0x158, 4, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_DISP_BUSY__ELCDIF_HSYNC IOMUX_PAD(0x43C, 0x15C, 0, 0x6f8, 2, MX50_ELCDIF_PAD_CTRL)
-#define MX50_PAD_DISP_BUSY__GPIO_2_18 IOMUX_PAD(0x43C, 0x15C, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_DISP_BUSY__WEIM_CS3 IOMUX_PAD(0x43C, 0x15C, 3, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_DISP_RESET__ELCDIF_RST IOMUX_PAD(0x440, 0x160, 0, 0x0, 0, MX50_ELCDIF_PAD_CTRL)
-#define MX50_PAD_DISP_RESET__GPIO_2_20 IOMUX_PAD(0x440, 0x160, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_DISP_RESET__WEIM_CS3 IOMUX_PAD(0x440, 0x160, 4, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_SD3_CMD__SD3_CMD IOMUX_PAD(0x444, 0x164, 0, 0x0, 0, MX50_SD_PAD_CTRL)
-#define MX50_PAD_SD3_CMD__GPIO_5_18 IOMUX_PAD(0x444, 0x164, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PIN_SD3_CMD__NANDF_WRN IOMUX_PAD(0x444, 0x164, 2, 0x0, 0, PAD_CTL_DSE_HIGH)
-#define MX50_PAD_SD3_CMD__SSP_CMD IOMUX_PAD(0x444, 0x164, 3, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_SD3_CLK__SD3_CLK IOMUX_PAD(0x448, 0x168, 0, 0x0, 0, MX50_SD_PAD_CTRL)
-#define MX50_PAD_SD3_CLK__GPIO_5_19 IOMUX_PAD(0x448, 0x168, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PIN_SD3_CLK__NANDF_RDN IOMUX_PAD(0x448, 0x168, 2, 0x0, 0, PAD_CTL_DSE_HIGH)
-#define MX50_PAD_SD3_CLK__SSP_CLK IOMUX_PAD(0x448, 0x168, 3, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_SD3_D0__SD3_D0 IOMUX_PAD(0x44C, 0x16C, 0, 0x0, 0, MX50_SD_PAD_CTRL)
-#define MX50_PAD_SD3_D0__GPIO_5_20 IOMUX_PAD(0x44C, 0x16C, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PIN_SD3_D0__NANDF_D4 IOMUX_PAD(0x44C, 0x16C, 2, 0x0, 0, PAD_CTL_DSE_HIGH)
-#define MX50_PAD_SD3_D0__SSP_D0 IOMUX_PAD(0x44C, 0x16C, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_SD3_D0__PLL1_BYP IOMUX_PAD(0x44C, 0x16C, 7, 0x6dc, 1, NO_PAD_CTRL)
-
-#define MX50_PAD_SD3_D1__SD3_D1 IOMUX_PAD(0x450, 0x170, 0, 0x0, 0, MX50_SD_PAD_CTRL)
-#define MX50_PAD_SD3_D1__GPIO_5_21 IOMUX_PAD(0x450, 0x170, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PIN_SD3_D1__NANDF_D5 IOMUX_PAD(0x450, 0x170, 2, 0x0, 0, PAD_CTL_DSE_HIGH)
-#define MX50_PAD_SD3_D1__PLL2_BYP IOMUX_PAD(0x450, 0x170, 7, 0x6e0, 1, NO_PAD_CTRL)
-
-#define MX50_PAD_SD3_D2__SD3_D2 IOMUX_PAD(0x454, 0x174, 0, 0x0, 0, MX50_SD_PAD_CTRL)
-#define MX50_PAD_SD3_D2__GPIO_5_22 IOMUX_PAD(0x454, 0x174, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PIN_SD3_D2__NANDF_D6 IOMUX_PAD(0x454, 0x174, 2, 0x0, 0, PAD_CTL_DSE_HIGH)
-#define MX50_PAD_SD3_D2__SSP_D2 IOMUX_PAD(0x454, 0x174, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_SD3_D2__PLL3_BYP IOMUX_PAD(0x454, 0x174, 7, 0x6e4, 1, NO_PAD_CTRL)
-
-#define MX50_PAD_SD3_D3__SD3_D3 IOMUX_PAD(0x458, 0x178, 0, 0x0, 0, MX50_SD_PAD_CTRL)
-#define MX50_PAD_SD3_D3__GPIO_5_23 IOMUX_PAD(0x458, 0x178, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PIN_SD3_D3__NANDF_D7 IOMUX_PAD(0x458, 0x178, 2, 0x0, 0, PAD_CTL_DSE_HIGH)
-#define MX50_PAD_SD3_D3__SSP_D3 IOMUX_PAD(0x458, 0x178, 3, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_SD3_D4__SD3_D4 IOMUX_PAD(0x45C, 0x17C, 0, 0x0, 0, MX50_SD_PAD_CTRL)
-#define MX50_PAD_SD3_D4__GPIO_5_24 IOMUX_PAD(0x45C, 0x17C, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PIN_SD3_D4__NANDF_D0 IOMUX_PAD(0x45C, 0x17C, 2, 0x0, 0, PAD_CTL_DSE_HIGH)
-#define MX50_PAD_SD3_D4__SSP_D4 IOMUX_PAD(0x45C, 0x17C, 1, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_SD3_D5__SD3_D5 IOMUX_PAD(0x460, 0x180, 0, 0x0, 0, MX50_SD_PAD_CTRL)
-#define MX50_PAD_SD3_D5__GPIO_5_25 IOMUX_PAD(0x460, 0x180, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PIN_SD3_D5__NANDF_D1 IOMUX_PAD(0x460, 0x180, 2, 0x0, 0, PAD_CTL_DSE_HIGH)
-#define MX50_PAD_SD3_D5__SSP_D5 IOMUX_PAD(0x460, 0x180, 3, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_SD3_D6__SD3_D6 IOMUX_PAD(0x464, 0x184, 0, 0x0, 0, MX50_SD_PAD_CTRL)
-#define MX50_PAD_SD3_D6__GPIO_5_26 IOMUX_PAD(0x464, 0x184, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PIN_SD3_D6__NANDF_D2 IOMUX_PAD(0x464, 0x184, 2, 0x0, 0, PAD_CTL_DSE_HIGH)
-#define MX50_PAD_SD3_D6__SSP_D6 IOMUX_PAD(0x464, 0x184, 3, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_SD3_D7__SD3_D7 IOMUX_PAD(0x468, 0x188, 0, 0x0, 0, MX50_SD_PAD_CTRL)
-#define MX50_PAD_SD3_D7__GPIO_5_27 IOMUX_PAD(0x468, 0x188, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PIN_SD3_D7__NANDF_D3 IOMUX_PAD(0x468, 0x188, 2, 0x0, 0, PAD_CTL_DSE_HIGH)
-#define MX50_PAD_SD3_D7__SSP_D7 IOMUX_PAD(0x468, 0x188, 3, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_SD3_WP__SD3_WP IOMUX_PAD(0x46C, 0x18C, 0, 0x0, 0, MX50_SD_PAD_CTRL)
-#define MX50_PAD_SD3_WP__GPIO_5_28 IOMUX_PAD(0x46C, 0x18C, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PIN_SD3_WP__NANDF_RESETN IOMUX_PAD(0x46C, 0x18C, 2, 0x0, 0, PAD_CTL_DSE_HIGH)
-#define MX50_PAD_SD3_WP__SSP_CD IOMUX_PAD(0x46C, 0x18C, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_SD3_WP__SD4_LCTL IOMUX_PAD(0x46C, 0x18C, 4, 0x0, 0, MX50_SD_PAD_CTRL)
-#define MX50_PAD_SD3_WP__WEIM_CS3 IOMUX_PAD(0x46C, 0x18C, 5, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_DISP_D8__DISP_D8 IOMUX_PAD(0x470, 0x190, 0, 0x71c, 0, MX50_ELCDIF_PAD_CTRL)
-#define MX50_PAD_DISP_D8__GPIO_2_8 IOMUX_PAD(0x470, 0x190, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_DISP_D8__NANDF_CLE IOMUX_PAD(0x470, 0x190, 2, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_DISP_D8__SD1_LCTL IOMUX_PAD(0x470, 0x190, 3, 0x0, 0, MX50_SD_PAD_CTRL)
-#define MX50_PAD_DISP_D8__SD4_CMD IOMUX_PAD(0x470, 0x190, 4, 0x74c, 2, MX50_SD_PAD_CTRL)
-#define MX50_PAD_DISP_D8__KEY_COL4 IOMUX_PAD(0x470, 0x190, 5, 0x790, 1, NO_PAD_CTRL)
-#define MX50_PAD_DISP_D8__FEC_TX_CLK IOMUX_PAD(0x470, 0x190, 6, 0x78c, 1, NO_PAD_CTRL)
-
-#define MX50_PAD_DISP_D9__DISP_D9 IOMUX_PAD(0x474, 0x194, 0, 0x720, 0, MX50_ELCDIF_PAD_CTRL)
-#define MX50_PAD_DISP_D9__GPIO_2_9 IOMUX_PAD(0x474, 0x194, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_DISP_D9__NANDF_ALE IOMUX_PAD(0x474, 0x194, 2, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_DISP_D9__SD2_LCTL IOMUX_PAD(0x474, 0x194, 3, 0x0, 0, MX50_SD_PAD_CTRL)
-#define MX50_PAD_DISP_D9__SD4_CLK IOMUX_PAD(0x474, 0x194, 4, 0x748, 2, MX50_SD_PAD_CTRL)
-#define MX50_PAD_DISP_D9__KEY_ROW4 IOMUX_PAD(0x474, 0x194, 5, 0x7a0, 1, NO_PAD_CTRL)
-#define MX50_PAD_DISP_D9__FEC_RX_ER IOMUX_PAD(0x474, 0x194, 6, 0x788, 1, NO_PAD_CTRL)
-
-#define MX50_PAD_DISP_D10__DISP_D10 IOMUX_PAD(0x478, 0x198, 0, 0x724, 0, MX50_ELCDIF_PAD_CTRL)
-#define MX50_PAD_DISP_D10__GPIO_2_10 IOMUX_PAD(0x478, 0x198, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_DISP_D10__NANDF_CEN0 IOMUX_PAD(0x478, 0x198, 2, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_DISP_D10__SD3_LCTL IOMUX_PAD(0x478, 0x198, 3, 0x0, 0, MX50_SD_PAD_CTRL)
-#define MX50_PAD_DISP_D10__SD4_D0 IOMUX_PAD(0x478, 0x198, 4, 0x750, 1, MX50_SD_PAD_CTRL)
-#define MX50_PAD_DISP_D10__KEY_COL5 IOMUX_PAD(0x478, 0x198, 5, 0x794, 1, NO_PAD_CTRL)
-#define MX50_PAD_DISP_D10__FEC_RX_DV IOMUX_PAD(0x478, 0x198, 6, 0x784, 1, NO_PAD_CTRL)
-
-#define MX50_PAD_DISP_D11__DISP_D11 IOMUX_PAD(0x47C, 0x19C, 0, 0x728, 0, MX50_ELCDIF_PAD_CTRL)
-#define MX50_PAD_DISP_D11__GPIO_2_11 IOMUX_PAD(0x47C, 0x19C, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_DISP_D11__NANDF_CEN1 IOMUX_PAD(0x47C, 0x19C, 2, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_DISP_D11__SD4_D1 IOMUX_PAD(0x47C, 0x19C, 4, 0x754, 1, MX50_SD_PAD_CTRL)
-#define MX50_PAD_DISP_D11__KEY_ROW5 IOMUX_PAD(0x47C, 0x19C, 5, 0x7a4, 1, NO_PAD_CTRL)
-#define MX50_PAD_DISP_D11__FEC_RDAT1 IOMUX_PAD(0x47C, 0x19C, 6, 0x77c, 1, NO_PAD_CTRL)
-
-#define MX50_PAD_DISP_D12__DISP_D12 IOMUX_PAD(0x480, 0x1A0, 0, 0x72c, 0, MX50_ELCDIF_PAD_CTRL)
-#define MX50_PAD_DISP_D12__GPIO_2_12 IOMUX_PAD(0x480, 0x1A0, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_DISP_D12__NANDF_CEN2 IOMUX_PAD(0x480, 0x1A0, 2, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_DISP_D12__SD1_CD IOMUX_PAD(0x480, 0x1A0, 3, 0x0, 0, MX50_SD_PAD_CTRL)
-#define MX50_PAD_DISP_D12__SD4_D2 IOMUX_PAD(0x480, 0x1A0, 4, 0x758, 1, MX50_SD_PAD_CTRL)
-#define MX50_PAD_DISP_D12__KEY_COL6 IOMUX_PAD(0x480, 0x1A0, 5, 0x798, 1, NO_PAD_CTRL)
-#define MX50_PAD_DISP_D12__FEC_RDAT0 IOMUX_PAD(0x480, 0x1A0, 6, 0x778, 1, NO_PAD_CTRL)
-
-#define MX50_PAD_DISP_D13__DISP_D13 IOMUX_PAD(0x484, 0x1A4, 0, 0x730, 0, MX50_ELCDIF_PAD_CTRL)
-#define MX50_PAD_DISP_D13__GPIO_2_13 IOMUX_PAD(0x484, 0x1A4, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_DISP_D13__NANDF_CEN3 IOMUX_PAD(0x484, 0x1A4, 2, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_DISP_D13__SD3_CD IOMUX_PAD(0x484, 0x1A4, 3, 0x0, 0, MX50_SD_PAD_CTRL)
-#define MX50_PAD_DISP_D13__SD4_D3 IOMUX_PAD(0x484, 0x1A4, 4, 0x75c, 1, MX50_SD_PAD_CTRL)
-#define MX50_PAD_DISP_D13__KEY_ROW6 IOMUX_PAD(0x484, 0x1A4, 5, 0x7a8, 1, NO_PAD_CTRL)
-#define MX50_PAD_DISP_D13__FEC_TX_EN IOMUX_PAD(0x484, 0x1A4, 6, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_DISP_D14__DISP_D14 IOMUX_PAD(0x488, 0x1A8, 0, 0x734, 0, MX50_ELCDIF_PAD_CTRL)
-#define MX50_PAD_DISP_D14__GPIO_2_14 IOMUX_PAD(0x488, 0x1A8, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_DISP_D14__NANDF_RDY0 IOMUX_PAD(0x488, 0x1A8, 2, 0x7b4, 1, NO_PAD_CTRL)
-#define MX50_PAD_DISP_D14__SD1_WP IOMUX_PAD(0x488, 0x1A8, 3, 0x0, 0, MX50_SD_PAD_CTRL)
-#define MX50_PAD_DISP_D14__SD4_WP IOMUX_PAD(0x488, 0x1A8, 4, 0x0, 0, MX50_SD_PAD_CTRL)
-#define MX50_PAD_DISP_D14__KEY_COL7 IOMUX_PAD(0x488, 0x1A8, 5, 0x79c, 1, NO_PAD_CTRL)
-#define MX50_PAD_DISP_D14__FEC_TDAT1 IOMUX_PAD(0x488, 0x1A8, 6, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_DISP_D15__DISP_D15 IOMUX_PAD(0x48C, 0x1AC, 0, 0x738, 0, MX50_ELCDIF_PAD_CTRL)
-#define MX50_PAD_DISP_D15__GPIO_2_15 IOMUX_PAD(0x48C, 0x1AC, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_DISP_D15__NANDF_DQS IOMUX_PAD(0x48C, 0x1AC, 2, 0x7b0, 1, NO_PAD_CTRL)
-#define MX50_PAD_DISP_D15__SD3_RST IOMUX_PAD(0x48C, 0x1AC, 3, 0x0, 0, MX50_SD_PAD_CTRL)
-#define MX50_PAD_DISP_D15__SD4_CD IOMUX_PAD(0x48C, 0x1AC, 4, 0x0, 0, MX50_SD_PAD_CTRL)
-#define MX50_PAD_DISP_D15__KEY_ROW7 IOMUX_PAD(0x48C, 0x1AC, 5, 0x7ac, 1, NO_PAD_CTRL)
-#define MX50_PAD_DISP_D15__FEC_TDAT0 IOMUX_PAD(0x48C, 0x1AC, 6, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_EPDC_D0__EPDC_D0 IOMUX_PAD(0x54C, 0x1B0, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_D0__GPIO_3_0 IOMUX_PAD(0x54C, 0x1B0, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_D0__WEIM_D0 IOMUX_PAD(0x54C, 0x1B0, 2, 0x7ec, 1, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_D0__ELCDIF_RS IOMUX_PAD(0x54C, 0x1B0, 3, 0x0, 0, MX50_ELCDIF_PAD_CTRL)
-#define MX50_PAD_EPDC_D0__ELCDIF_PIXCLK IOMUX_PAD(0x54C, 0x1B0, 4, 0x0, 0, MX50_ELCDIF_PAD_CTRL)
-
-#define MX50_PAD_EPDC_D1__EPDC_D1 IOMUX_PAD(0x550, 0x1B4, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_D1__GPIO_3_1 IOMUX_PAD(0x550, 0x1B4, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_D1__WEIM_D1 IOMUX_PAD(0x550, 0x1B4, 2, 0x7f0, 1, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_D1__ELCDIF_CS IOMUX_PAD(0x550, 0x1B4, 3, 0x0, 0, MX50_ELCDIF_PAD_CTRL)
-#define MX50_PAD_EPDC_D1__ELCDIF_EN IOMUX_PAD(0x550, 0x1B4, 4, 0x0, 0, MX50_ELCDIF_PAD_CTRL)
-
-#define MX50_PAD_EPDC_D2__EPDC_D2 IOMUX_PAD(0x554, 0x1B8, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_D2__GPIO_3_2 IOMUX_PAD(0x554, 0x1B8, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_D2__WEIM_D2 IOMUX_PAD(0x554, 0x1B8, 2, 0x7f4, 1, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_D2__ELCDIF_WR IOMUX_PAD(0x554, 0x1B8, 3, 0x0, 0, MX50_ELCDIF_PAD_CTRL)
-#define MX50_PAD_EPDC_D2__ELCDIF_VSYNC IOMUX_PAD(0x554, 0x1B8, 4, 0x73c, 2, MX50_ELCDIF_PAD_CTRL)
-
-#define MX50_PAD_EPDC_D3__EPDC_D3 IOMUX_PAD(0x558, 0x1BC, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_D3__GPIO_3_3 IOMUX_PAD(0x558, 0x1BC, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_D3__WEIM_D3 IOMUX_PAD(0x558, 0x1BC, 2, 0x7f8, 1, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_D3__ELCDIF_RD IOMUX_PAD(0x558, 0x1BC, 3, 0x0, 0, MX50_ELCDIF_PAD_CTRL)
-#define MX50_PAD_EPDC_D3__ELCDIF_HSYNC IOMUX_PAD(0x558, 0x1BC, 4, 0x6f8, 3, MX50_ELCDIF_PAD_CTRL)
-
-#define MX50_PAD_EPDC_D4__EPDC_D4 IOMUX_PAD(0x55C, 0x1C0, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_D4__GPIO_3_4 IOMUX_PAD(0x55C, 0x1C0, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_D4__WEIM_D4 IOMUX_PAD(0x55C, 0x1C0, 2, 0x7fc, 1, NO_PAD_CTRL)
-
-#define MX50_PAD_EPDC_D5__EPDC_D5 IOMUX_PAD(0x560, 0x1C4, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_D5__GPIO_3_5 IOMUX_PAD(0x560, 0x1C4, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_D5__WEIM_D5 IOMUX_PAD(0x560, 0x1C4, 2, 0x800, 1, NO_PAD_CTRL)
-
-#define MX50_PAD_EPDC_D6__EPDC_D6 IOMUX_PAD(0x564, 0x1C8, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_D6__GPIO_3_6 IOMUX_PAD(0x564, 0x1C8, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_D6__WEIM_D6 IOMUX_PAD(0x564, 0x1C8, 2, 0x804, 1, NO_PAD_CTRL)
-
-#define MX50_PAD_EPDC_D7__EPDC_D7 IOMUX_PAD(0x568, 0x1CC, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_D7__GPIO_3_7 IOMUX_PAD(0x568, 0x1CC, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_D7__WEIM_D7 IOMUX_PAD(0x568, 0x1CC, 2, 0x808, 1, NO_PAD_CTRL)
-
-#define MX50_PAD_EPDC_D8__EPDC_D8 IOMUX_PAD(0x56C, 0x1D0, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_D8__GPIO_3_8 IOMUX_PAD(0x56C, 0x1D0, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_D8__WEIM_D8 IOMUX_PAD(0x56C, 0x1D0, 2, 0x80c, 2, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_D8__ELCDIF_D24 IOMUX_PAD(0x56C, 0x1D0, 3, 0x0, 0, MX50_ELCDIF_PAD_CTRL)
-
-#define MX50_PAD_EPDC_D9__EPDC_D9 IOMUX_PAD(0x570, 0x1D4, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_D9__GPIO_3_9 IOMUX_PAD(0x570, 0x1D4, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_D9__WEIM_D9 IOMUX_PAD(0x570, 0x1D4, 2, 0x810, 2, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_D9__ELCDIF_D25 IOMUX_PAD(0x570, 0x1D4, 3, 0x0, 0, MX50_ELCDIF_PAD_CTRL)
-
-#define MX50_PAD_EPDC_D10__EPDC_D10 IOMUX_PAD(0x574, 0x1D8, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_D10__GPIO_3_10 IOMUX_PAD(0x574, 0x1D8, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_D10__WEIM_D10 IOMUX_PAD(0x574, 0x1D8, 2, 0x814, 2, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_D10__ELCDIF_D26 IOMUX_PAD(0x574, 0x1D8, 3, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_EPDC_D11__EPDC_D11 IOMUX_PAD(0x578, 0x1DC, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_D11__GPIO_3_11 IOMUX_PAD(0x578, 0x1DC, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_D11__WEIM_D11 IOMUX_PAD(0x578, 0x1DC, 2, 0x818, 2, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_D11__ELCDIF_D27 IOMUX_PAD(0x578, 0x1DC, 3, 0x0, 0, MX50_ELCDIF_PAD_CTRL)
-
-#define MX50_PAD_EPDC_D12__EPDC_D12 IOMUX_PAD(0x57C, 0x1E0, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_D12__GPIO_3_12 IOMUX_PAD(0x57C, 0x1E0, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_D12__WEIM_D12 IOMUX_PAD(0x57C, 0x1E0, 2, 0x81c, 1, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_D12__ELCDIF_D28 IOMUX_PAD(0x57C, 0x1E0, 3, 0x0, 0, MX50_ELCDIF_PAD_CTRL)
-
-#define MX50_PAD_EPDC_D13__EPDC_D13 IOMUX_PAD(0x580, 0x1E4, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_D13__GPIO_3_13 IOMUX_PAD(0x580, 0x1E4, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_D13__WEIM_D13 IOMUX_PAD(0x580, 0x1E4, 2, 0x820, 1, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_D13__ELCDIF_D29 IOMUX_PAD(0x580, 0x1E4, 3, 0x0, 0, MX50_ELCDIF_PAD_CTRL)
-
-#define MX50_PAD_EPDC_D14__EPDC_D14 IOMUX_PAD(0x584, 0x1E8, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_D14__GPIO_3_14 IOMUX_PAD(0x584, 0x1E8, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_D14__WEIM_D14 IOMUX_PAD(0x584, 0x1E8, 2, 0x824, 1, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_D14__ELCDIF_D30 IOMUX_PAD(0x584, 0x1E8, 3, 0x0, 0, MX50_ELCDIF_PAD_CTRL)
-#define MX50_PAD_EPDC_D14__AUD6_TXD IOMUX_PAD(0x584, 0x1E8, 4, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_EPDC_D15__EPDC_D15 IOMUX_PAD(0x588, 0x1EC, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_D15__GPIO_3_15 IOMUX_PAD(0x588, 0x1EC, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_D15__WEIM_D15 IOMUX_PAD(0x588, 0x1EC, 2, 0x828, 1, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_D15__ELCDIF_D31 IOMUX_PAD(0x588, 0x1EC, 3, 0x0, 0, MX50_ELCDIF_PAD_CTRL)
-#define MX50_PAD_EPDC_D15__AUD6_TXC IOMUX_PAD(0x588, 0x1EC, 4, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_EPDC_GDCLK__EPDC_GDCLK IOMUX_PAD(0x58C, 0x1F0, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_GDCLK__GPIO_3_16 IOMUX_PAD(0x58C, 0x1F0, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_GDCLK__WEIM_D16 IOMUX_PAD(0x58C, 0x1F0, 2, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_GDCLK__ELCDIF_D16 IOMUX_PAD(0x58C, 0x1F0, 3, 0x0, 0, MX50_ELCDIF_PAD_CTRL)
-#define MX50_PAD_EPDC_GDCLK__AUD6_TXFS IOMUX_PAD(0x58C, 0x1F0, 4, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_EPDC_GDSP__EPDC_GDSP IOMUX_PAD(0x590, 0x1F4, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_GDSP__GPIO_3_17 IOMUX_PAD(0x590, 0x1F4, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_GDSP__WEIM_D17 IOMUX_PAD(0x590, 0x1F4, 2, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_GDSP__ELCDIF_D17 IOMUX_PAD(0x590, 0x1F4, 3, 0x0, 0, MX50_ELCDIF_PAD_CTRL)
-#define MX50_PAD_EPDC_GDSP__AUD6_RXD IOMUX_PAD(0x590, 0x1F4, 4, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_EPDC_GDOE__EPDC_GDOE IOMUX_PAD(0x594, 0x1F8, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_GDOE__GPIO_3_18 IOMUX_PAD(0x594, 0x1F8, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_GDOE__WEIM_D18 IOMUX_PAD(0x594, 0x1F8, 2, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_GDOE__ELCDIF_D18 IOMUX_PAD(0x594, 0x1F8, 3, 0x0, 0, MX50_ELCDIF_PAD_CTRL)
-#define MX50_PAD_EPDC_GDOE__AUD6_RXC IOMUX_PAD(0x594, 0x1F8, 4, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_EPDC_GDRL__EPDC_GDRL IOMUX_PAD(0x598, 0x1FC, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_GDRL__GPIO_3_19 IOMUX_PAD(0x598, 0x1FC, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_GDRL__WEIM_D19 IOMUX_PAD(0x598, 0x1FC, 2, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_GDRL__ELCDIF_D19 IOMUX_PAD(0x598, 0x1FC, 3, 0x0, 0, MX50_ELCDIF_PAD_CTRL)
-#define MX50_PAD_EPDC_GDRL__AUD6_RXFS IOMUX_PAD(0x598, 0x1FC, 4, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_EPDC_SDCLK__EPDC_SDCLK IOMUX_PAD(0x59C, 0x200, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_SDCLK__GPIO_3_20 IOMUX_PAD(0x59C, 0x200, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_SDCLK__WEIM_D20 IOMUX_PAD(0x59C, 0x200, 2, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_SDCLK__ELCDIF_D20 IOMUX_PAD(0x59C, 0x200, 3, 0x0, 0, MX50_ELCDIF_PAD_CTRL)
-#define MX50_PAD_EPDC_SDCLK__AUD5_TXD IOMUX_PAD(0x59C, 0x200, 4, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_EPDC_SDOEZ__EPDC_SDOEZ IOMUX_PAD(0x5A0, 0x204, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_SDOEZ__GPIO_3_21 IOMUX_PAD(0x5A0, 0x204, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_SDOEZ__WEIM_D21 IOMUX_PAD(0x5A0, 0x204, 2, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_SDOEZ__ELCDIF_D21 IOMUX_PAD(0x5A0, 0x204, 3, 0x0, 0, MX50_ELCDIF_PAD_CTRL)
-#define MX50_PAD_EPDC_SDOEZ__AUD5_TXC IOMUX_PAD(0x5A0, 0x204, 4, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_EPDC_SDOED__EPDC_SDOED IOMUX_PAD(0x5A4, 0x208, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_SDOED__GPIO_3_22 IOMUX_PAD(0x5A4, 0x208, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_SDOED__WEIM_D22 IOMUX_PAD(0x5A4, 0x208, 2, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_SDOED__ELCDIF_D22 IOMUX_PAD(0x5A4, 0x208, 3, 0x0, 0, MX50_ELCDIF_PAD_CTRL)
-#define MX50_PAD_EPDC_SDOED__AUD5_TXFS IOMUX_PAD(0x5A4, 0x208, 4, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_EPDC_SDOE__EPDC_SDOE IOMUX_PAD(0x5A8, 0x20C, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_SDOE__GPIO_3_23 IOMUX_PAD(0x5A8, 0x20C, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_SDOE__WEIM_D23 IOMUX_PAD(0x5A8, 0x20C, 2, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_SDOE__ELCDIF_D23 IOMUX_PAD(0x5A8, 0x20C, 3, 0x0, 0, MX50_ELCDIF_PAD_CTRL)
-#define MX50_PAD_EPDC_SDOE__AUD5_RXD IOMUX_PAD(0x5A8, 0x20C, 4, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_EPDC_SDLE__EPDC_SDLE IOMUX_PAD(0x5AC, 0x210, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_SDLE__GPIO_3_24 IOMUX_PAD(0x5AC, 0x210, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_SDLE__WEIM_D24 IOMUX_PAD(0x5AC, 0x210, 2, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_SDLE__ELCDIF_D8 IOMUX_PAD(0x5AC, 0x210, 3, 0x71c, 1, MX50_ELCDIF_PAD_CTRL)
-#define MX50_PAD_EPDC_SDLE__AUD5_RXC IOMUX_PAD(0x5AC, 0x210, 4, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_EPDC_SDCLKN__EPDC_SDCLKN IOMUX_PAD(0x5B0, 0x214, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_SDCLKN__GPIO_3_25 IOMUX_PAD(0x5B0, 0x214, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_SDCLKN__WEIM_D25 IOMUX_PAD(0x5B0, 0x214, 2, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_SDCLKN__ELCDIF_D9 IOMUX_PAD(0x5B0, 0x214, 3, 0x720, 1, MX50_ELCDIF_PAD_CTRL)
-#define MX50_PAD_EPDC_SDCLKN__AUD5_RXFS IOMUX_PAD(0x5B0, 0x214, 4, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_EPDC_SDSHR__EPDC_SDSHR IOMUX_PAD(0x5B4, 0x218, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_SDSHR__GPIO_3_26 IOMUX_PAD(0x5B4, 0x218, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_SDSHR__WEIM_D26 IOMUX_PAD(0x5B4, 0x218, 2, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_SDSHR__ELCDIF_D10 IOMUX_PAD(0x5B4, 0x218, 3, 0x724, 1, MX50_ELCDIF_PAD_CTRL)
-#define MX50_PAD_EPDC_SDSHR__AUD4_TXD IOMUX_PAD(0x5B4, 0x218, 4, 0x6c8, 1, NO_PAD_CTRL)
-
-#define MX50_PAD_EPDC_PWRCOM__EPDC_PWRCOM IOMUX_PAD(0x5B8, 0x21C, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_PWRCOM__GPIO_3_27 IOMUX_PAD(0x5B8, 0x21C, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_PWRCOM__WEIM_D27 IOMUX_PAD(0x5B8, 0x21C, 2, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_PWRCOM__ELCDIF_D11 IOMUX_PAD(0x5B8, 0x21C, 3, 0x728, 1, MX50_ELCDIF_PAD_CTRL)
-#define MX50_PAD_EPDC_PWRCOM__AUD4_TXC IOMUX_PAD(0x5B8, 0x21C, 4, 0x6d4, 1, NO_PAD_CTRL)
-
-#define MX50_PAD_EPDC_PWRSTAT__EPDC_PWRSTAT IOMUX_PAD(0x5BC, 0x220, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_PWRSTAT__GPIO_3_28 IOMUX_PAD(0x5BC, 0x220, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_PWRSTAT__WEIM_D28 IOMUX_PAD(0x5BC, 0x220, 2, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_PWRSTAT__ELCDIF_D12 IOMUX_PAD(0x5BC, 0x220, 3, 0x72c, 1, MX50_ELCDIF_PAD_CTRL)
-#define MX50_PAD_EPDC_PWRSTAT__AUD4_TXFS IOMUX_PAD(0x5BC, 0x220, 4, 0x6d8, 1, NO_PAD_CTRL)
-
-#define MX50_PAD_EPDC_PWRCTRL0__EPDC_PWRCTRL0 IOMUX_PAD(0x5C0, 0x224, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_PWRCTRL0__GPIO_3_29 IOMUX_PAD(0x5C0, 0x224, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_PWRCTRL0__WEIM_D29 IOMUX_PAD(0x5C0, 0x224, 2, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_PWRCTRL0__ELCDIF_D13 IOMUX_PAD(0x5C0, 0x224, 3, 0x730, 1, MX50_ELCDIF_PAD_CTRL)
-#define MX50_PAD_EPDC_PWRCTRL0__AUD4_RXD IOMUX_PAD(0x5C0, 0x224, 4, 0x6c4, 1, NO_PAD_CTRL)
-
-#define MX50_PAD_EPDC_PWRCTRL1__EPDC_PWRCTRL1 IOMUX_PAD(0x5C4, 0x228, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_PWRCTRL1__GPIO_3_30 IOMUX_PAD(0x5C4, 0x228, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_PWRCTRL1__WEIM_D30 IOMUX_PAD(0x5C4, 0x228, 2, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_PWRCTRL1__ELCDIF_D14 IOMUX_PAD(0x5C4, 0x228, 3, 0x734, 1, MX50_ELCDIF_PAD_CTRL)
-#define MX50_PAD_EPDC_PWRCTRL1__AUD4_RXC IOMUX_PAD(0x5C4, 0x228, 4, 0x6cc, 1, NO_PAD_CTRL)
-
-#define MX50_PAD_EPDC_PWRCTRL2__EPDC_PWRCTRL2 IOMUX_PAD(0x5C8, 0x22C, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_PWRCTRL2__GPIO_3_31 IOMUX_PAD(0x5C8, 0x22C, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_PWRCTRL2__WEIM_D31 IOMUX_PAD(0x5C8, 0x22C, 2, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_PWRCTRL2__ELCDIF_D15 IOMUX_PAD(0x5C8, 0x22C, 3, 0x738, 1, MX50_ELCDIF_PAD_CTRL)
-#define MX50_PAD_EPDC_PWRCTRL2__AUD4_RXFS IOMUX_PAD(0x5C8, 0x22C, 4, 0x6d0, 1, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_PWRCTRL2__SDMA_EXT0 IOMUX_PAD(0x5C8, 0x22C, 6, 0x7b8, 1, NO_PAD_CTRL)
-
-#define MX50_PAD_EPDC_PWRCTRL3__PWRCTRL3 IOMUX_PAD(0x5CC, 0x230, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_PWRCTRL3__GPIO_4_20 IOMUX_PAD(0x5CC, 0x230, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_PWRCTRL3__WEIM_EB2 IOMUX_PAD(0x5CC, 0x230, 2, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_PWRCTRL3__SDMA_EXT1 IOMUX_PAD(0x5CC, 0x230, 6, 0x7bc, 1, NO_PAD_CTRL)
-
-#define MX50_PAD_EPDC_VCOM0__EPDC_VCOM0 IOMUX_PAD(0x5D0, 0x234, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_VCOM0__GPIO_4_21 IOMUX_PAD(0x5D0, 0x234, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_VCOM0__WEIM_EB3 IOMUX_PAD(0x5D0, 0x234, 2, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_EPDC_VCOM1__EPDC_VCOM1 IOMUX_PAD(0x5D4, 0x238, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_VCOM1__GPIO_4_22 IOMUX_PAD(0x5D4, 0x238, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_VCOM1__WEIM_CS3 IOMUX_PAD(0x5D4, 0x238, 2, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_EPDC_BDR0__EPDC_BDR0 IOMUX_PAD(0x5D8, 0x23C, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_BDR0__GPIO_4_23 IOMUX_PAD(0x5D8, 0x23C, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_BDR0__ELCDIF_D7 IOMUX_PAD(0x5D8, 0x23C, 3, 0x718, 1, MX50_ELCDIF_PAD_CTRL)
-
-#define MX50_PAD_EPDC_BDR1__EPDC_BDR1 IOMUX_PAD(0x5DC, 0x240, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_BDR1__GPIO_4_24 IOMUX_PAD(0x5DC, 0x240, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_BDR1__ELCDIF_D6 IOMUX_PAD(0x5DC, 0x240, 3, 0x714, 1, MX50_ELCDIF_PAD_CTRL)
-
-#define MX50_PAD_EPDC_SDCE0__EPDC_SDCE0 IOMUX_PAD(0x5E0, 0x244, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_SDCE0__GPIO_4_25 IOMUX_PAD(0x5E0, 0x244, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_SDCE0__ELCDIF_D5 IOMUX_PAD(0x5E0, 0x244, 3, 0x710, 1, MX50_ELCDIF_PAD_CTRL)
-
-#define MX50_PAD_EPDC_SDCE1__EPDC_SDCE1 IOMUX_PAD(0x5E4, 0x248, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_SDCE1__GPIO_4_26 IOMUX_PAD(0x5E4, 0x248, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_SDCE1__ELCDIF_D4 IOMUX_PAD(0x5E4, 0x248, 2, 0x70c, 1, MX50_ELCDIF_PAD_CTRL)
-
-#define MX50_PAD_EPDC_SDCE2__EPDC_SDCE2 IOMUX_PAD(0x5E8, 0x24C, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_SDCE2__GPIO_4_27 IOMUX_PAD(0x5E8, 0x24C, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_SDCE2__ELCDIF_DAT3 IOMUX_PAD(0x5E8, 0x24C, 3, 0x708, 1, MX50_ELCDIF_PAD_CTRL)
-
-#define MX50_PAD_EPDC_SDCE3__EPDC_SDCE3 IOMUX_PAD(0x5EC, 0x250, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_SDCE3__GPIO_4_28 IOMUX_PAD(0x5EC, 0x250, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_SDCE3__ELCDIF_D2 IOMUX_PAD(0x5EC, 0x250, 3, 0x704, 1, MX50_ELCDIF_PAD_CTRL)
-
-#define MX50_PAD_EPDC_SDCE4__EPDC_SDCE4 IOMUX_PAD(0x5F0, 0x254, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_SDCE4__GPIO_4_29 IOMUX_PAD(0x5F0, 0x254, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_SDCE4__ELCDIF_D1 IOMUX_PAD(0x5F0, 0x254, 3, 0x700, 1, MX50_ELCDIF_PAD_CTRL)
-
-#define MX50_PAD_EPDC_SDCE5__EPDC_SDCE5 IOMUX_PAD(0x5F4, 0x258, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_SDCE5__GPIO_4_30 IOMUX_PAD(0x5F4, 0x258, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_SDCE5__ELCDIF_D0 IOMUX_PAD(0x5F4, 0x258, 3, 0x6fc, 1, MX50_ELCDIF_PAD_CTRL)
-
-#define MX50_PAD_EIM_DA0__WEIM_A0 IOMUX_PAD(0x5F8, 0x25C, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EIM_DA0__GPIO_1_0 IOMUX_PAD(0x5F8, 0x25C, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EIM_DA0__KEY_COL4 IOMUX_PAD(0x5f8, 0x25C, 3, 0x790, 2, NO_PAD_CTRL)
-
-#define MX50_PAD_EIM_DA1__WEIM_A1 IOMUX_PAD(0x5FC, 0x260, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EIM_DA1__GPIO_1_1 IOMUX_PAD(0x5FC, 0x260, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EIM_DA1__KEY_ROW4 IOMUX_PAD(0x5fc, 0x260, 3, 0x7a0, 2, MX50_KEYPAD_CTRL)
-
-#define MX50_PAD_EIM_DA2__WEIM_A2 IOMUX_PAD(0x600, 0x264, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EIM_DA2__GPIO_1_2 IOMUX_PAD(0x600, 0x264, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EIM_DA2__KEY_COL5 IOMUX_PAD(0x600, 0x264, 3, 0x794, 2, NO_PAD_CTRL)
-
-#define MX50_PAD_EIM_DA3__WEIM_A3 IOMUX_PAD(0x604, 0x268, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EIM_DA3__GPIO_1_3 IOMUX_PAD(0x604, 0x268, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EIM_DA3__KEY_ROW5 IOMUX_PAD(0x604, 0x268, 3, 0x7a4, 2, MX50_KEYPAD_CTRL)
-
-#define MX50_PAD_EIM_DA4__WEIM_A4 IOMUX_PAD(0x608, 0x26C, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EIM_DA4__GPIO_1_4 IOMUX_PAD(0x608, 0x26C, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EIM_DA4__KEY_COL6 IOMUX_PAD(0x608, 0x26C, 3, 0x798, 2, NO_PAD_CTRL)
-
-#define MX50_PAD_EIM_DA5__WEIM_A5 IOMUX_PAD(0x60C, 0x270, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EIM_DA5__GPIO_1_5 IOMUX_PAD(0x60C, 0x270, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EIM_DA5__KEY_ROW6 IOMUX_PAD(0x60C, 0x270, 3, 0x7a8, 2, MX50_KEYPAD_CTRL)
-
-#define MX50_PAD_EIM_DA6__WEIM_A6 IOMUX_PAD(0x610, 0x274, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EIM_DA6__GPIO_1_6 IOMUX_PAD(0x610, 0x274, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EIM_DA6__KEY_COL7 IOMUX_PAD(0x610, 0x274, 3, 0x79c, 2, NO_PAD_CTRL)
-
-#define MX50_PAD_EIM_DA7__WEIM_A7 IOMUX_PAD(0x614, 0x278, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EIM_DA7__GPIO_1_7 IOMUX_PAD(0x614, 0x278, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EIM_DA7__KEY_ROW7 IOMUX_PAD(0x614, 0x278, 3, 0x7ac, 2, MX50_KEYPAD_CTRL)
-
-#define MX50_PAD_EIM_DA8__WEIM_A8 IOMUX_PAD(0x618, 0x27C, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EIM_DA8__GPIO_1_8 IOMUX_PAD(0x618, 0x27C, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PIN_EIM_DA8__NANDF_CLE IOMUX_PAD(0x618, 0x27C, 2, 0x0, 0, PAD_CTL_DSE_HIGH)
-
-#define MX50_PAD_EIM_DA9__WEIM_A9 IOMUX_PAD(0x61C, 0x280, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EIM_DA9__GPIO_1_9 IOMUX_PAD(0x61C, 0x280, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PIN_EIM_DA9__NANDF_ALE IOMUX_PAD(0x61C, 0x280, 2, 0x0, 0, PAD_CTL_DSE_HIGH)
-
-#define MX50_PAD_EIM_DA10__WEIM_A10 IOMUX_PAD(0x620, 0x284, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EIM_DA10__GPIO_1_10 IOMUX_PAD(0x620, 0x284, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PIN_EIM_DA10__NANDF_CE0 IOMUX_PAD(0x620, 0x284, 2, 0x0, 0, PAD_CTL_DSE_HIGH)
-
-#define MX50_PAD_EIM_DA11__WEIM_A11 IOMUX_PAD(0x624, 0x288, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EIM_DA11__GPIO_1_11 IOMUX_PAD(0x624, 0x288, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PIN_EIM_DA11__NANDF_CE1 IOMUX_PAD(0x624, 0x288, 2, 0x0, 0, PAD_CTL_DSE_HIGH)
-
-#define MX50_PAD_EIM_DA12__WEIM_A12 IOMUX_PAD(0x628, 0x28C, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EIM_DA12__GPIO_1_12 IOMUX_PAD(0x628, 0x28C, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PIN_EIM_DA12__NANDF_CE2 IOMUX_PAD(0x628, 0x28C, 2, 0x0, 0, PAD_CTL_DSE_HIGH)
-#define MX50_PAD_EIM_DA12__EPDC_SDCE6 IOMUX_PAD(0x628, 0x28C, 3, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_EIM_DA13__WEIM_A13 IOMUX_PAD(0x62C, 0x290, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EIM_DA13__GPIO_1_13 IOMUX_PAD(0x62C, 0x290, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PIN_EIM_DA13__NANDF_CE3 IOMUX_PAD(0x62C, 0x290, 2, 0x0, 0, PAD_CTL_DSE_HIGH)
-#define MX50_PIN_EIM_DA13__EPDC_SDCE7 IOMUX_PAD(0x62C, 0x290, 3, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_EIM_DA14__WEIM_A14 IOMUX_PAD(0x630, 0x294, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EIM_DA14__GPIO_1_14 IOMUX_PAD(0x630, 0x294, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EIM_DA14__NANDF_READY IOMUX_PAD(0x630, 0x294, 2, 0x7B4, 2, PAD_CTL_PKE | \
- PAD_CTL_PUE | PAD_CTL_PUS_100K_UP)
-#define MX50_PAD_EIM_DA14__EPDC_SDCE8 IOMUX_PAD(0x630, 0x294, 3, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_EIM_DA15__WEIM_A15 IOMUX_PAD(0x634, 0x298, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EIM_DA15__GPIO_1_15 IOMUX_PAD(0x634, 0x298, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PIN_EIM_DA15__NANDF_DQS IOMUX_PAD(0x634, 0x298, 2, 0x7B0, 2, PAD_CTL_DSE_HIGH)
-#define MX50_PAD_EIM_DA15__EPDC_SDCE9 IOMUX_PAD(0x634, 0x298, 3, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_EIM_CS2__WEIM_CS2 IOMUX_PAD(0x638, 0x29C, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EIM_CS2__GPIO_1_16 IOMUX_PAD(0x638, 0x29C, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EIM_CS2__WEIM_A27 IOMUX_PAD(0x638, 0x29C, 2, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_EIM_CS1__WEIM_CS1 IOMUX_PAD(0x63C, 0x2A0, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EIM_CS1__GPIO_1_17 IOMUX_PAD(0x63C, 0x2A0, 1, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_EIM_CS0__WEIM_CS0 IOMUX_PAD(0x640, 0x2A4, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EIM_CS0__GPIO_1_18 IOMUX_PAD(0x640, 0x2A4, 1, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_EIM_EB0__WEIM_EB0 IOMUX_PAD(0x644, 0x2A8, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EIM_EB0__GPIO_1_19 IOMUX_PAD(0x644, 0x2A8, 1, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_EIM_EB1__WEIM_EB1 IOMUX_PAD(0x648, 0x2AC, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EIM_EB1__GPIO_1_20 IOMUX_PAD(0x648, 0x2AC, 1, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_EIM_WAIT__WEIM_WAIT IOMUX_PAD(0x64C, 0x2B0, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EIM_WAIT__GPIO_1_21 IOMUX_PAD(0x64C, 0x2B0, 1, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_EIM_BCLK__WEIM_BCLK IOMUX_PAD(0x650, 0x2B4, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EIM_BCLK__GPIO_1_22 IOMUX_PAD(0x650, 0x2B4, 1, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_EIM_RDY__WEIM_RDY IOMUX_PAD(0x654, 0x2B8, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EIM_RDY__GPIO_1_23 IOMUX_PAD(0x654, 0x2B8, 1, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_EIM_OE__WEIM_OE IOMUX_PAD(0x658, 0x2BC, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EIM_OE__GPIO_1_24 IOMUX_PAD(0x658, 0x2BC, 1, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_EIM_RW__WEIM_RW IOMUX_PAD(0x65C, 0x2C0, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EIM_RW__GPIO_1_25 IOMUX_PAD(0x65C, 0x2C0, 1, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_EIM_LBA__WEIM_LBA IOMUX_PAD(0x660, 0x2C4, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EIM_LBA__GPIO_1_26 IOMUX_PAD(0x660, 0x2C4, 1, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_EIM_CRE__WEIM_CRE IOMUX_PAD(0x664, 0x2C8, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EIM_CRE__GPIO_1_27 IOMUX_PAD(0x664, 0x2C8, 1, 0x0, 0, NO_PAD_CTRL)
-
-#endif /* __MACH_IOMUX_MX50_H__ */
diff --git a/arch/arm/mach-imx/lluart.c b/arch/arm/mach-imx/lluart.c
deleted file mode 100644
index 2fdc9bf..0000000
--- a/arch/arm/mach-imx/lluart.c
+++ /dev/null
@@ -1,47 +0,0 @@
-/*
- * Copyright 2011 Freescale Semiconductor, Inc.
- * Copyright 2011 Linaro Ltd.
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-#include <linux/init.h>
-#include <asm/page.h>
-#include <asm/sizes.h>
-#include <asm/mach/map.h>
-
-#include "hardware.h"
-
-#define IMX6Q_UART1_BASE_ADDR 0x02020000
-#define IMX6Q_UART2_BASE_ADDR 0x021e8000
-#define IMX6Q_UART3_BASE_ADDR 0x021ec000
-#define IMX6Q_UART4_BASE_ADDR 0x021f0000
-#define IMX6Q_UART5_BASE_ADDR 0x021f4000
-
-/*
- * IMX6Q_UART_BASE_ADDR is put in the middle to force the expansion
- * of IMX6Q_UART##n##_BASE_ADDR.
- */
-#define IMX6Q_UART_BASE_ADDR(n) IMX6Q_UART##n##_BASE_ADDR
-#define IMX6Q_UART_BASE(n) IMX6Q_UART_BASE_ADDR(n)
-#define IMX6Q_DEBUG_UART_BASE IMX6Q_UART_BASE(CONFIG_DEBUG_IMX6Q_UART_PORT)
-
-static struct map_desc imx_lluart_desc = {
-#ifdef CONFIG_DEBUG_IMX6Q_UART
- .virtual = IMX_IO_P2V(IMX6Q_DEBUG_UART_BASE),
- .pfn = __phys_to_pfn(IMX6Q_DEBUG_UART_BASE),
- .length = 0x4000,
- .type = MT_DEVICE,
-#endif
-};
-
-void __init imx_lluart_map_io(void)
-{
- if (imx_lluart_desc.virtual)
- iotable_init(&imx_lluart_desc, 1);
-}
diff --git a/arch/arm/mach-imx/mach-apf9328.c b/arch/arm/mach-imx/mach-apf9328.c
index 5c9bd2c..067580b 100644
--- a/arch/arm/mach-imx/mach-apf9328.c
+++ b/arch/arm/mach-imx/mach-apf9328.c
@@ -137,17 +137,13 @@
mx1_clocks_init(32768);
}
-static struct sys_timer apf9328_timer = {
- .init = apf9328_timer_init,
-};
-
MACHINE_START(APF9328, "Armadeus APF9328")
/* Maintainer: Gwenhael Goavec-Merou, ARMadeus Systems */
.map_io = mx1_map_io,
.init_early = imx1_init_early,
.init_irq = mx1_init_irq,
.handle_irq = imx1_handle_irq,
- .timer = &apf9328_timer,
+ .init_time = apf9328_timer_init,
.init_machine = apf9328_init,
.restart = mxc_restart,
MACHINE_END
diff --git a/arch/arm/mach-imx/mach-armadillo5x0.c b/arch/arm/mach-imx/mach-armadillo5x0.c
index 59bd6b0..368a6e3 100644
--- a/arch/arm/mach-imx/mach-armadillo5x0.c
+++ b/arch/arm/mach-imx/mach-armadillo5x0.c
@@ -557,10 +557,6 @@
mx31_clocks_init(26000000);
}
-static struct sys_timer armadillo5x0_timer = {
- .init = armadillo5x0_timer_init,
-};
-
MACHINE_START(ARMADILLO5X0, "Armadillo-500")
/* Maintainer: Alberto Panizzo */
.atag_offset = 0x100,
@@ -568,7 +564,7 @@
.init_early = imx31_init_early,
.init_irq = mx31_init_irq,
.handle_irq = imx31_handle_irq,
- .timer = &armadillo5x0_timer,
+ .init_time = armadillo5x0_timer_init,
.init_machine = armadillo5x0_init,
.restart = mxc_restart,
MACHINE_END
diff --git a/arch/arm/mach-imx/mach-bug.c b/arch/arm/mach-imx/mach-bug.c
index 3a39d5a..2d00476 100644
--- a/arch/arm/mach-imx/mach-bug.c
+++ b/arch/arm/mach-imx/mach-bug.c
@@ -53,16 +53,12 @@
mx31_clocks_init(26000000);
}
-static struct sys_timer bug_timer = {
- .init = bug_timer_init,
-};
-
MACHINE_START(BUG, "BugLabs BUGBase")
.map_io = mx31_map_io,
.init_early = imx31_init_early,
.init_irq = mx31_init_irq,
.handle_irq = imx31_handle_irq,
- .timer = &bug_timer,
+ .init_time = bug_timer_init,
.init_machine = bug_board_init,
.restart = mxc_restart,
MACHINE_END
diff --git a/arch/arm/mach-imx/mach-cpuimx27.c b/arch/arm/mach-imx/mach-cpuimx27.c
index 12a3706..1465593 100644
--- a/arch/arm/mach-imx/mach-cpuimx27.c
+++ b/arch/arm/mach-imx/mach-cpuimx27.c
@@ -309,17 +309,13 @@
mx27_clocks_init(26000000);
}
-static struct sys_timer eukrea_cpuimx27_timer = {
- .init = eukrea_cpuimx27_timer_init,
-};
-
MACHINE_START(EUKREA_CPUIMX27, "EUKREA CPUIMX27")
.atag_offset = 0x100,
.map_io = mx27_map_io,
.init_early = imx27_init_early,
.init_irq = mx27_init_irq,
.handle_irq = imx27_handle_irq,
- .timer = &eukrea_cpuimx27_timer,
+ .init_time = eukrea_cpuimx27_timer_init,
.init_machine = eukrea_cpuimx27_init,
.restart = mxc_restart,
MACHINE_END
diff --git a/arch/arm/mach-imx/mach-cpuimx35.c b/arch/arm/mach-imx/mach-cpuimx35.c
index 5a31bf8..771362d 100644
--- a/arch/arm/mach-imx/mach-cpuimx35.c
+++ b/arch/arm/mach-imx/mach-cpuimx35.c
@@ -193,10 +193,6 @@
mx35_clocks_init();
}
-static struct sys_timer eukrea_cpuimx35_timer = {
- .init = eukrea_cpuimx35_timer_init,
-};
-
MACHINE_START(EUKREA_CPUIMX35SD, "Eukrea CPUIMX35")
/* Maintainer: Eukrea Electromatique */
.atag_offset = 0x100,
@@ -204,7 +200,7 @@
.init_early = imx35_init_early,
.init_irq = mx35_init_irq,
.handle_irq = imx35_handle_irq,
- .timer = &eukrea_cpuimx35_timer,
+ .init_time = eukrea_cpuimx35_timer_init,
.init_machine = eukrea_cpuimx35_init,
.restart = mxc_restart,
MACHINE_END
diff --git a/arch/arm/mach-imx/mach-cpuimx51sd.c b/arch/arm/mach-imx/mach-cpuimx51sd.c
index b727de0..9b73932 100644
--- a/arch/arm/mach-imx/mach-cpuimx51sd.c
+++ b/arch/arm/mach-imx/mach-cpuimx51sd.c
@@ -355,10 +355,6 @@
mx51_clocks_init(32768, 24000000, 22579200, 0);
}
-static struct sys_timer mxc_timer = {
- .init = eukrea_cpuimx51sd_timer_init,
-};
-
MACHINE_START(EUKREA_CPUIMX51SD, "Eukrea CPUIMX51SD")
/* Maintainer: Eric Bénard <eric@eukrea.com> */
.atag_offset = 0x100,
@@ -366,7 +362,7 @@
.init_early = imx51_init_early,
.init_irq = mx51_init_irq,
.handle_irq = imx51_handle_irq,
- .timer = &mxc_timer,
+ .init_time = eukrea_cpuimx51sd_timer_init,
.init_machine = eukrea_cpuimx51sd_init,
.init_late = imx51_init_late,
.restart = mxc_restart,
diff --git a/arch/arm/mach-imx/mach-eukrea_cpuimx25.c b/arch/arm/mach-imx/mach-eukrea_cpuimx25.c
index 75027a5..4bf4544 100644
--- a/arch/arm/mach-imx/mach-eukrea_cpuimx25.c
+++ b/arch/arm/mach-imx/mach-eukrea_cpuimx25.c
@@ -159,10 +159,6 @@
mx25_clocks_init();
}
-static struct sys_timer eukrea_cpuimx25_timer = {
- .init = eukrea_cpuimx25_timer_init,
-};
-
MACHINE_START(EUKREA_CPUIMX25SD, "Eukrea CPUIMX25")
/* Maintainer: Eukrea Electromatique */
.atag_offset = 0x100,
@@ -170,7 +166,7 @@
.init_early = imx25_init_early,
.init_irq = mx25_init_irq,
.handle_irq = imx25_handle_irq,
- .timer = &eukrea_cpuimx25_timer,
+ .init_time = eukrea_cpuimx25_timer_init,
.init_machine = eukrea_cpuimx25_init,
.restart = mxc_restart,
MACHINE_END
diff --git a/arch/arm/mach-imx/mach-imx27_visstrim_m10.c b/arch/arm/mach-imx/mach-imx27_visstrim_m10.c
index 318bd8d..29ac8ee6 100644
--- a/arch/arm/mach-imx/mach-imx27_visstrim_m10.c
+++ b/arch/arm/mach-imx/mach-imx27_visstrim_m10.c
@@ -598,10 +598,6 @@
mx27_clocks_init((unsigned long)25000000);
}
-static struct sys_timer visstrim_m10_timer = {
- .init = visstrim_m10_timer_init,
-};
-
MACHINE_START(IMX27_VISSTRIM_M10, "Vista Silicon Visstrim_M10")
.atag_offset = 0x100,
.reserve = visstrim_reserve,
@@ -609,7 +605,7 @@
.init_early = imx27_init_early,
.init_irq = mx27_init_irq,
.handle_irq = imx27_handle_irq,
- .timer = &visstrim_m10_timer,
+ .init_time = visstrim_m10_timer_init,
.init_machine = visstrim_m10_board_init,
.restart = mxc_restart,
MACHINE_END
diff --git a/arch/arm/mach-imx/mach-imx27ipcam.c b/arch/arm/mach-imx/mach-imx27ipcam.c
index 53a8601..1a851ae 100644
--- a/arch/arm/mach-imx/mach-imx27ipcam.c
+++ b/arch/arm/mach-imx/mach-imx27ipcam.c
@@ -65,10 +65,6 @@
mx27_clocks_init(25000000);
}
-static struct sys_timer mx27ipcam_timer = {
- .init = mx27ipcam_timer_init,
-};
-
MACHINE_START(IMX27IPCAM, "Freescale IMX27IPCAM")
/* maintainer: Freescale Semiconductor, Inc. */
.atag_offset = 0x100,
@@ -76,7 +72,7 @@
.init_early = imx27_init_early,
.init_irq = mx27_init_irq,
.handle_irq = imx27_handle_irq,
- .timer = &mx27ipcam_timer,
+ .init_time = mx27ipcam_timer_init,
.init_machine = mx27ipcam_init,
.restart = mxc_restart,
MACHINE_END
diff --git a/arch/arm/mach-imx/mach-imx27lite.c b/arch/arm/mach-imx/mach-imx27lite.c
index fc8dce9..3da2e3e 100644
--- a/arch/arm/mach-imx/mach-imx27lite.c
+++ b/arch/arm/mach-imx/mach-imx27lite.c
@@ -72,17 +72,13 @@
mx27_clocks_init(26000000);
}
-static struct sys_timer mx27lite_timer = {
- .init = mx27lite_timer_init,
-};
-
MACHINE_START(IMX27LITE, "LogicPD i.MX27LITE")
.atag_offset = 0x100,
.map_io = mx27_map_io,
.init_early = imx27_init_early,
.init_irq = mx27_init_irq,
.handle_irq = imx27_handle_irq,
- .timer = &mx27lite_timer,
+ .init_time = mx27lite_timer_init,
.init_machine = mx27lite_init,
.restart = mxc_restart,
MACHINE_END
diff --git a/arch/arm/mach-imx/mach-imx53.c b/arch/arm/mach-imx/mach-imx53.c
index 860284d..f579c61 100644
--- a/arch/arm/mach-imx/mach-imx53.c
+++ b/arch/arm/mach-imx/mach-imx53.c
@@ -44,26 +44,22 @@
of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
}
-static void __init imx53_timer_init(void)
-{
- mx53_clocks_init_dt();
-}
-
-static struct sys_timer imx53_timer = {
- .init = imx53_timer_init,
-};
-
static const char *imx53_dt_board_compat[] __initdata = {
"fsl,imx53",
NULL
};
+static void __init imx53_timer_init(void)
+{
+ mx53_clocks_init_dt();
+}
+
DT_MACHINE_START(IMX53_DT, "Freescale i.MX53 (Device Tree Support)")
.map_io = mx53_map_io,
.init_early = imx53_init_early,
.init_irq = mx53_init_irq,
.handle_irq = imx53_handle_irq,
- .timer = &imx53_timer,
+ .init_time = imx53_timer_init,
.init_machine = imx53_dt_init,
.init_late = imx53_init_late,
.dt_compat = imx53_dt_board_compat,
diff --git a/arch/arm/mach-imx/mach-imx6q.c b/arch/arm/mach-imx/mach-imx6q.c
index 4eb1b3a..5a18e7e 100644
--- a/arch/arm/mach-imx/mach-imx6q.c
+++ b/arch/arm/mach-imx/mach-imx6q.c
@@ -18,6 +18,7 @@
#include <linux/init.h>
#include <linux/io.h>
#include <linux/irq.h>
+#include <linux/irqchip.h>
#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/of_irq.h>
@@ -29,8 +30,8 @@
#include <asm/cpuidle.h>
#include <asm/smp_twd.h>
#include <asm/hardware/cache-l2x0.h>
-#include <asm/hardware/gic.h>
#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
#include <asm/mach/time.h>
#include <asm/system_misc.h>
@@ -216,22 +217,16 @@
static void __init imx6q_map_io(void)
{
- imx_lluart_map_io();
+ debug_ll_io_init();
imx_scu_map_io();
- imx6q_clock_map_io();
}
-static const struct of_device_id imx6q_irq_match[] __initconst = {
- { .compatible = "arm,cortex-a9-gic", .data = gic_of_init, },
- { /* sentinel */ }
-};
-
static void __init imx6q_init_irq(void)
{
l2x0_of_init(0, ~0UL);
imx_src_init();
imx_gpc_init();
- of_irq_init(imx6q_irq_match);
+ irqchip_init();
}
static void __init imx6q_timer_init(void)
@@ -241,10 +236,6 @@
imx_print_silicon_rev("i.MX6Q", imx6q_revision());
}
-static struct sys_timer imx6q_timer = {
- .init = imx6q_timer_init,
-};
-
static const char *imx6q_dt_compat[] __initdata = {
"fsl,imx6q",
NULL,
@@ -254,8 +245,7 @@
.smp = smp_ops(imx_smp_ops),
.map_io = imx6q_map_io,
.init_irq = imx6q_init_irq,
- .handle_irq = imx6q_handle_irq,
- .timer = &imx6q_timer,
+ .init_time = imx6q_timer_init,
.init_machine = imx6q_init_machine,
.init_late = imx6q_init_late,
.dt_compat = imx6q_dt_compat,
diff --git a/arch/arm/mach-imx/mach-kzm_arm11_01.c b/arch/arm/mach-imx/mach-kzm_arm11_01.c
index 2e536ea5..c7bc41d 100644
--- a/arch/arm/mach-imx/mach-kzm_arm11_01.c
+++ b/arch/arm/mach-imx/mach-kzm_arm11_01.c
@@ -284,17 +284,13 @@
mx31_clocks_init(26000000);
}
-static struct sys_timer kzm_timer = {
- .init = kzm_timer_init,
-};
-
MACHINE_START(KZM_ARM11_01, "Kyoto Microcomputer Co., Ltd. KZM-ARM11-01")
.atag_offset = 0x100,
.map_io = kzm_map_io,
.init_early = imx31_init_early,
.init_irq = mx31_init_irq,
.handle_irq = imx31_handle_irq,
- .timer = &kzm_timer,
+ .init_time = kzm_timer_init,
.init_machine = kzm_board_init,
.restart = mxc_restart,
MACHINE_END
diff --git a/arch/arm/mach-imx/mach-mx1ads.c b/arch/arm/mach-imx/mach-mx1ads.c
index 06b4837..9f883e4 100644
--- a/arch/arm/mach-imx/mach-mx1ads.c
+++ b/arch/arm/mach-imx/mach-mx1ads.c
@@ -132,10 +132,6 @@
mx1_clocks_init(32000);
}
-static struct sys_timer mx1ads_timer = {
- .init = mx1ads_timer_init,
-};
-
MACHINE_START(MX1ADS, "Freescale MX1ADS")
/* Maintainer: Sascha Hauer, Pengutronix */
.atag_offset = 0x100,
@@ -143,7 +139,7 @@
.init_early = imx1_init_early,
.init_irq = mx1_init_irq,
.handle_irq = imx1_handle_irq,
- .timer = &mx1ads_timer,
+ .init_time = mx1ads_timer_init,
.init_machine = mx1ads_init,
.restart = mxc_restart,
MACHINE_END
@@ -154,7 +150,7 @@
.init_early = imx1_init_early,
.init_irq = mx1_init_irq,
.handle_irq = imx1_handle_irq,
- .timer = &mx1ads_timer,
+ .init_time = mx1ads_timer_init,
.init_machine = mx1ads_init,
.restart = mxc_restart,
MACHINE_END
diff --git a/arch/arm/mach-imx/mach-mx21ads.c b/arch/arm/mach-imx/mach-mx21ads.c
index 6adb313..a06aa4d 100644
--- a/arch/arm/mach-imx/mach-mx21ads.c
+++ b/arch/arm/mach-imx/mach-mx21ads.c
@@ -318,10 +318,6 @@
mx21_clocks_init(32768, 26000000);
}
-static struct sys_timer mx21ads_timer = {
- .init = mx21ads_timer_init,
-};
-
MACHINE_START(MX21ADS, "Freescale i.MX21ADS")
/* maintainer: Freescale Semiconductor, Inc. */
.atag_offset = 0x100,
@@ -329,7 +325,7 @@
.init_early = imx21_init_early,
.init_irq = mx21_init_irq,
.handle_irq = imx21_handle_irq,
- .timer = &mx21ads_timer,
+ .init_time = mx21ads_timer_init,
.init_machine = mx21ads_board_init,
.restart = mxc_restart,
MACHINE_END
diff --git a/arch/arm/mach-imx/mach-mx25_3ds.c b/arch/arm/mach-imx/mach-mx25_3ds.c
index b1b03aa..8bcda68 100644
--- a/arch/arm/mach-imx/mach-mx25_3ds.c
+++ b/arch/arm/mach-imx/mach-mx25_3ds.c
@@ -257,10 +257,6 @@
mx25_clocks_init();
}
-static struct sys_timer mx25pdk_timer = {
- .init = mx25pdk_timer_init,
-};
-
MACHINE_START(MX25_3DS, "Freescale MX25PDK (3DS)")
/* Maintainer: Freescale Semiconductor, Inc. */
.atag_offset = 0x100,
@@ -268,7 +264,7 @@
.init_early = imx25_init_early,
.init_irq = mx25_init_irq,
.handle_irq = imx25_handle_irq,
- .timer = &mx25pdk_timer,
+ .init_time = mx25pdk_timer_init,
.init_machine = mx25pdk_init,
.restart = mxc_restart,
MACHINE_END
diff --git a/arch/arm/mach-imx/mach-mx27_3ds.c b/arch/arm/mach-imx/mach-mx27_3ds.c
index d0e547f..25b3e4c 100644
--- a/arch/arm/mach-imx/mach-mx27_3ds.c
+++ b/arch/arm/mach-imx/mach-mx27_3ds.c
@@ -538,10 +538,6 @@
mx27_clocks_init(26000000);
}
-static struct sys_timer mx27pdk_timer = {
- .init = mx27pdk_timer_init,
-};
-
MACHINE_START(MX27_3DS, "Freescale MX27PDK")
/* maintainer: Freescale Semiconductor, Inc. */
.atag_offset = 0x100,
@@ -549,7 +545,7 @@
.init_early = imx27_init_early,
.init_irq = mx27_init_irq,
.handle_irq = imx27_handle_irq,
- .timer = &mx27pdk_timer,
+ .init_time = mx27pdk_timer_init,
.init_machine = mx27pdk_init,
.restart = mxc_restart,
MACHINE_END
diff --git a/arch/arm/mach-imx/mach-mx27ads.c b/arch/arm/mach-imx/mach-mx27ads.c
index 3d036f5..9821b824 100644
--- a/arch/arm/mach-imx/mach-mx27ads.c
+++ b/arch/arm/mach-imx/mach-mx27ads.c
@@ -323,10 +323,6 @@
mx27_clocks_init(fref);
}
-static struct sys_timer mx27ads_timer = {
- .init = mx27ads_timer_init,
-};
-
static struct map_desc mx27ads_io_desc[] __initdata = {
{
.virtual = PBC_BASE_ADDRESS,
@@ -349,7 +345,7 @@
.init_early = imx27_init_early,
.init_irq = mx27_init_irq,
.handle_irq = imx27_handle_irq,
- .timer = &mx27ads_timer,
+ .init_time = mx27ads_timer_init,
.init_machine = mx27ads_board_init,
.restart = mxc_restart,
MACHINE_END
diff --git a/arch/arm/mach-imx/mach-mx31_3ds.c b/arch/arm/mach-imx/mach-mx31_3ds.c
index bc301be..1ed9161 100644
--- a/arch/arm/mach-imx/mach-mx31_3ds.c
+++ b/arch/arm/mach-imx/mach-mx31_3ds.c
@@ -762,10 +762,6 @@
mx31_clocks_init(26000000);
}
-static struct sys_timer mx31_3ds_timer = {
- .init = mx31_3ds_timer_init,
-};
-
static void __init mx31_3ds_reserve(void)
{
/* reserve MX31_3DS_CAMERA_BUF_SIZE bytes for mx3-camera */
@@ -780,7 +776,7 @@
.init_early = imx31_init_early,
.init_irq = mx31_init_irq,
.handle_irq = imx31_handle_irq,
- .timer = &mx31_3ds_timer,
+ .init_time = mx31_3ds_timer_init,
.init_machine = mx31_3ds_init,
.reserve = mx31_3ds_reserve,
.restart = mxc_restart,
diff --git a/arch/arm/mach-imx/mach-mx31ads.c b/arch/arm/mach-imx/mach-mx31ads.c
index 8b56f88..daf8889 100644
--- a/arch/arm/mach-imx/mach-mx31ads.c
+++ b/arch/arm/mach-imx/mach-mx31ads.c
@@ -576,10 +576,6 @@
mx31_clocks_init(26000000);
}
-static struct sys_timer mx31ads_timer = {
- .init = mx31ads_timer_init,
-};
-
MACHINE_START(MX31ADS, "Freescale MX31ADS")
/* Maintainer: Freescale Semiconductor, Inc. */
.atag_offset = 0x100,
@@ -587,7 +583,7 @@
.init_early = imx31_init_early,
.init_irq = mx31ads_init_irq,
.handle_irq = imx31_handle_irq,
- .timer = &mx31ads_timer,
+ .init_time = mx31ads_timer_init,
.init_machine = mx31ads_init,
.restart = mxc_restart,
MACHINE_END
diff --git a/arch/arm/mach-imx/mach-mx31lilly.c b/arch/arm/mach-imx/mach-mx31lilly.c
index 08b9965..832b1e2 100644
--- a/arch/arm/mach-imx/mach-mx31lilly.c
+++ b/arch/arm/mach-imx/mach-mx31lilly.c
@@ -303,17 +303,13 @@
mx31_clocks_init(26000000);
}
-static struct sys_timer mx31lilly_timer = {
- .init = mx31lilly_timer_init,
-};
-
MACHINE_START(LILLY1131, "INCO startec LILLY-1131")
.atag_offset = 0x100,
.map_io = mx31_map_io,
.init_early = imx31_init_early,
.init_irq = mx31_init_irq,
.handle_irq = imx31_handle_irq,
- .timer = &mx31lilly_timer,
+ .init_time = mx31lilly_timer_init,
.init_machine = mx31lilly_board_init,
.restart = mxc_restart,
MACHINE_END
diff --git a/arch/arm/mach-imx/mach-mx31lite.c b/arch/arm/mach-imx/mach-mx31lite.c
index bdcd92e..bea0729 100644
--- a/arch/arm/mach-imx/mach-mx31lite.c
+++ b/arch/arm/mach-imx/mach-mx31lite.c
@@ -285,10 +285,6 @@
mx31_clocks_init(26000000);
}
-static struct sys_timer mx31lite_timer = {
- .init = mx31lite_timer_init,
-};
-
MACHINE_START(MX31LITE, "LogicPD i.MX31 SOM")
/* Maintainer: Freescale Semiconductor, Inc. */
.atag_offset = 0x100,
@@ -296,7 +292,7 @@
.init_early = imx31_init_early,
.init_irq = mx31_init_irq,
.handle_irq = imx31_handle_irq,
- .timer = &mx31lite_timer,
+ .init_time = mx31lite_timer_init,
.init_machine = mx31lite_init,
.restart = mxc_restart,
MACHINE_END
diff --git a/arch/arm/mach-imx/mach-mx31moboard.c b/arch/arm/mach-imx/mach-mx31moboard.c
index 2517cfa..dae4cd7 100644
--- a/arch/arm/mach-imx/mach-mx31moboard.c
+++ b/arch/arm/mach-imx/mach-mx31moboard.c
@@ -596,10 +596,6 @@
mx31_clocks_init(26000000);
}
-static struct sys_timer mx31moboard_timer = {
- .init = mx31moboard_timer_init,
-};
-
static void __init mx31moboard_reserve(void)
{
/* reserve 4 MiB for mx3-camera */
@@ -615,7 +611,7 @@
.init_early = imx31_init_early,
.init_irq = mx31_init_irq,
.handle_irq = imx31_handle_irq,
- .timer = &mx31moboard_timer,
+ .init_time = mx31moboard_timer_init,
.init_machine = mx31moboard_init,
.restart = mxc_restart,
MACHINE_END
diff --git a/arch/arm/mach-imx/mach-mx35_3ds.c b/arch/arm/mach-imx/mach-mx35_3ds.c
index 5277da4..a42f4f0 100644
--- a/arch/arm/mach-imx/mach-mx35_3ds.c
+++ b/arch/arm/mach-imx/mach-mx35_3ds.c
@@ -602,10 +602,6 @@
mx35_clocks_init();
}
-static struct sys_timer mx35pdk_timer = {
- .init = mx35pdk_timer_init,
-};
-
static void __init mx35_3ds_reserve(void)
{
/* reserve MX35_3DS_CAMERA_BUF_SIZE bytes for mx3-camera */
@@ -620,7 +616,7 @@
.init_early = imx35_init_early,
.init_irq = mx35_init_irq,
.handle_irq = imx35_handle_irq,
- .timer = &mx35pdk_timer,
+ .init_time = mx35pdk_timer_init,
.init_machine = mx35_3ds_init,
.reserve = mx35_3ds_reserve,
.restart = mxc_restart,
diff --git a/arch/arm/mach-imx/mach-mx50_rdp.c b/arch/arm/mach-imx/mach-mx50_rdp.c
deleted file mode 100644
index 0c1f88a..0000000
--- a/arch/arm/mach-imx/mach-mx50_rdp.c
+++ /dev/null
@@ -1,225 +0,0 @@
-/*
- * Copyright (C) 2010 Freescale Semiconductor, Inc. All Rights Reserved.
- */
-
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
-
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
-
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
- */
-
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/gpio.h>
-#include <linux/delay.h>
-#include <linux/io.h>
-
-#include <asm/irq.h>
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-
-#include "common.h"
-#include "devices-imx50.h"
-#include "hardware.h"
-#include "iomux-mx50.h"
-
-#define FEC_EN IMX_GPIO_NR(6, 23)
-#define FEC_RESET_B IMX_GPIO_NR(4, 12)
-
-static iomux_v3_cfg_t mx50_rdp_pads[] __initdata = {
- /* SD1 */
- MX50_PAD_ECSPI2_SS0__GPIO_4_19,
- MX50_PAD_EIM_CRE__GPIO_1_27,
- MX50_PAD_SD1_CMD__SD1_CMD,
-
- MX50_PAD_SD1_CLK__SD1_CLK,
- MX50_PAD_SD1_D0__SD1_D0,
- MX50_PAD_SD1_D1__SD1_D1,
- MX50_PAD_SD1_D2__SD1_D2,
- MX50_PAD_SD1_D3__SD1_D3,
-
- /* SD2 */
- MX50_PAD_SD2_CD__GPIO_5_17,
- MX50_PAD_SD2_WP__GPIO_5_16,
- MX50_PAD_SD2_CMD__SD2_CMD,
- MX50_PAD_SD2_CLK__SD2_CLK,
- MX50_PAD_SD2_D0__SD2_D0,
- MX50_PAD_SD2_D1__SD2_D1,
- MX50_PAD_SD2_D2__SD2_D2,
- MX50_PAD_SD2_D3__SD2_D3,
- MX50_PAD_SD2_D4__SD2_D4,
- MX50_PAD_SD2_D5__SD2_D5,
- MX50_PAD_SD2_D6__SD2_D6,
- MX50_PAD_SD2_D7__SD2_D7,
-
- /* SD3 */
- MX50_PAD_SD3_CMD__SD3_CMD,
- MX50_PAD_SD3_CLK__SD3_CLK,
- MX50_PAD_SD3_D0__SD3_D0,
- MX50_PAD_SD3_D1__SD3_D1,
- MX50_PAD_SD3_D2__SD3_D2,
- MX50_PAD_SD3_D3__SD3_D3,
- MX50_PAD_SD3_D4__SD3_D4,
- MX50_PAD_SD3_D5__SD3_D5,
- MX50_PAD_SD3_D6__SD3_D6,
- MX50_PAD_SD3_D7__SD3_D7,
-
- /* PWR_INT */
- MX50_PAD_ECSPI2_MISO__GPIO_4_18,
-
- /* UART pad setting */
- MX50_PAD_UART1_TXD__UART1_TXD,
- MX50_PAD_UART1_RXD__UART1_RXD,
- MX50_PAD_UART1_RTS__UART1_RTS,
- MX50_PAD_UART2_TXD__UART2_TXD,
- MX50_PAD_UART2_RXD__UART2_RXD,
- MX50_PAD_UART2_CTS__UART2_CTS,
- MX50_PAD_UART2_RTS__UART2_RTS,
-
- MX50_PAD_I2C1_SCL__I2C1_SCL,
- MX50_PAD_I2C1_SDA__I2C1_SDA,
- MX50_PAD_I2C2_SCL__I2C2_SCL,
- MX50_PAD_I2C2_SDA__I2C2_SDA,
-
- MX50_PAD_EPITO__USBH1_PWR,
- /* Need to comment below line if
- * one needs to debug owire.
- */
- MX50_PAD_OWIRE__USBH1_OC,
- /* using gpio to control otg pwr */
- MX50_PAD_PWM2__GPIO_6_25,
- MX50_PAD_I2C3_SCL__USBOTG_OC,
-
- MX50_PAD_SSI_RXC__FEC_MDIO,
- MX50_PAD_SSI_RXFS__FEC_MDC,
- MX50_PAD_DISP_D0__FEC_TXCLK,
- MX50_PAD_DISP_D1__FEC_RX_ER,
- MX50_PAD_DISP_D2__FEC_RX_DV,
- MX50_PAD_DISP_D3__FEC_RXD1,
- MX50_PAD_DISP_D4__FEC_RXD0,
- MX50_PAD_DISP_D5__FEC_TX_EN,
- MX50_PAD_DISP_D6__FEC_TXD1,
- MX50_PAD_DISP_D7__FEC_TXD0,
- MX50_PAD_I2C3_SDA__GPIO_6_23,
- MX50_PAD_ECSPI1_SCLK__GPIO_4_12,
-
- MX50_PAD_CSPI_SS0__CSPI_SS0,
- MX50_PAD_ECSPI1_MOSI__CSPI_SS1,
- MX50_PAD_CSPI_MOSI__CSPI_MOSI,
- MX50_PAD_CSPI_MISO__CSPI_MISO,
-
- /* SGTL500_OSC_EN */
- MX50_PAD_UART1_CTS__GPIO_6_8,
-
- /* SGTL_AMP_SHDN */
- MX50_PAD_UART3_RXD__GPIO_6_15,
-
- /* Keypad */
- MX50_PAD_KEY_COL0__KEY_COL0,
- MX50_PAD_KEY_ROW0__KEY_ROW0,
- MX50_PAD_KEY_COL1__KEY_COL1,
- MX50_PAD_KEY_ROW1__KEY_ROW1,
- MX50_PAD_KEY_COL2__KEY_COL2,
- MX50_PAD_KEY_ROW2__KEY_ROW2,
- MX50_PAD_KEY_COL3__KEY_COL3,
- MX50_PAD_KEY_ROW3__KEY_ROW3,
- MX50_PAD_EIM_DA0__KEY_COL4,
- MX50_PAD_EIM_DA1__KEY_ROW4,
- MX50_PAD_EIM_DA2__KEY_COL5,
- MX50_PAD_EIM_DA3__KEY_ROW5,
- MX50_PAD_EIM_DA4__KEY_COL6,
- MX50_PAD_EIM_DA5__KEY_ROW6,
- MX50_PAD_EIM_DA6__KEY_COL7,
- MX50_PAD_EIM_DA7__KEY_ROW7,
- /*EIM pads */
- MX50_PAD_EIM_DA8__GPIO_1_8,
- MX50_PAD_EIM_DA9__GPIO_1_9,
- MX50_PAD_EIM_DA10__GPIO_1_10,
- MX50_PAD_EIM_DA11__GPIO_1_11,
- MX50_PAD_EIM_DA12__GPIO_1_12,
- MX50_PAD_EIM_DA13__GPIO_1_13,
- MX50_PAD_EIM_DA14__GPIO_1_14,
- MX50_PAD_EIM_DA15__GPIO_1_15,
- MX50_PAD_EIM_CS2__GPIO_1_16,
- MX50_PAD_EIM_CS1__GPIO_1_17,
- MX50_PAD_EIM_CS0__GPIO_1_18,
- MX50_PAD_EIM_EB0__GPIO_1_19,
- MX50_PAD_EIM_EB1__GPIO_1_20,
- MX50_PAD_EIM_WAIT__GPIO_1_21,
- MX50_PAD_EIM_BCLK__GPIO_1_22,
- MX50_PAD_EIM_RDY__GPIO_1_23,
- MX50_PAD_EIM_OE__GPIO_1_24,
-};
-
-/* Serial ports */
-static const struct imxuart_platform_data uart_pdata __initconst = {
- .flags = IMXUART_HAVE_RTSCTS,
-};
-
-static const struct fec_platform_data fec_data __initconst = {
- .phy = PHY_INTERFACE_MODE_RMII,
-};
-
-static inline void mx50_rdp_fec_reset(void)
-{
- gpio_request(FEC_EN, "fec-en");
- gpio_direction_output(FEC_EN, 0);
- gpio_request(FEC_RESET_B, "fec-reset_b");
- gpio_direction_output(FEC_RESET_B, 0);
- msleep(1);
- gpio_set_value(FEC_RESET_B, 1);
-}
-
-static const struct imxi2c_platform_data i2c_data __initconst = {
- .bitrate = 100000,
-};
-
-/*
- * Board specific initialization.
- */
-static void __init mx50_rdp_board_init(void)
-{
- imx50_soc_init();
-
- mxc_iomux_v3_setup_multiple_pads(mx50_rdp_pads,
- ARRAY_SIZE(mx50_rdp_pads));
-
- imx50_add_imx_uart(0, &uart_pdata);
- imx50_add_imx_uart(1, &uart_pdata);
- mx50_rdp_fec_reset();
- imx50_add_fec(&fec_data);
- imx50_add_imx_i2c(0, &i2c_data);
- imx50_add_imx_i2c(1, &i2c_data);
- imx50_add_imx_i2c(2, &i2c_data);
-}
-
-static void __init mx50_rdp_timer_init(void)
-{
- mx50_clocks_init(32768, 24000000, 22579200);
-}
-
-static struct sys_timer mx50_rdp_timer = {
- .init = mx50_rdp_timer_init,
-};
-
-MACHINE_START(MX50_RDP, "Freescale MX50 Reference Design Platform")
- .map_io = mx50_map_io,
- .init_early = imx50_init_early,
- .init_irq = mx50_init_irq,
- .handle_irq = imx50_handle_irq,
- .timer = &mx50_rdp_timer,
- .init_machine = mx50_rdp_board_init,
- .restart = mxc_restart,
-MACHINE_END
diff --git a/arch/arm/mach-imx/mach-mx51_3ds.c b/arch/arm/mach-imx/mach-mx51_3ds.c
deleted file mode 100644
index abc25bd..0000000
--- a/arch/arm/mach-imx/mach-mx51_3ds.c
+++ /dev/null
@@ -1,178 +0,0 @@
-/*
- * Copyright 2008-2009 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright (C) 2010 Jason Wang <jason77.wang@gmail.com>
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-#include <linux/irq.h>
-#include <linux/platform_device.h>
-#include <linux/spi/spi.h>
-#include <linux/gpio.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-
-#include "3ds_debugboard.h"
-#include "common.h"
-#include "devices-imx51.h"
-#include "hardware.h"
-#include "iomux-mx51.h"
-
-#define MX51_3DS_ECSPI2_CS (GPIO_PORTC + 28)
-
-static iomux_v3_cfg_t mx51_3ds_pads[] = {
- /* UART1 */
- MX51_PAD_UART1_RXD__UART1_RXD,
- MX51_PAD_UART1_TXD__UART1_TXD,
- MX51_PAD_UART1_RTS__UART1_RTS,
- MX51_PAD_UART1_CTS__UART1_CTS,
-
- /* UART2 */
- MX51_PAD_UART2_RXD__UART2_RXD,
- MX51_PAD_UART2_TXD__UART2_TXD,
- MX51_PAD_EIM_D25__UART2_CTS,
- MX51_PAD_EIM_D26__UART2_RTS,
-
- /* UART3 */
- MX51_PAD_UART3_RXD__UART3_RXD,
- MX51_PAD_UART3_TXD__UART3_TXD,
- MX51_PAD_EIM_D24__UART3_CTS,
- MX51_PAD_EIM_D27__UART3_RTS,
-
- /* CPLD PARENT IRQ PIN */
- MX51_PAD_GPIO1_6__GPIO1_6,
-
- /* KPP */
- MX51_PAD_KEY_ROW0__KEY_ROW0,
- MX51_PAD_KEY_ROW1__KEY_ROW1,
- MX51_PAD_KEY_ROW2__KEY_ROW2,
- MX51_PAD_KEY_ROW3__KEY_ROW3,
- MX51_PAD_KEY_COL0__KEY_COL0,
- MX51_PAD_KEY_COL1__KEY_COL1,
- MX51_PAD_KEY_COL2__KEY_COL2,
- MX51_PAD_KEY_COL3__KEY_COL3,
- MX51_PAD_KEY_COL4__KEY_COL4,
- MX51_PAD_KEY_COL5__KEY_COL5,
-
- /* eCSPI2 */
- MX51_PAD_NANDF_RB2__ECSPI2_SCLK,
- MX51_PAD_NANDF_RB3__ECSPI2_MISO,
- MX51_PAD_NANDF_D15__ECSPI2_MOSI,
- MX51_PAD_NANDF_D12__GPIO3_28,
-};
-
-/* Serial ports */
-static const struct imxuart_platform_data uart_pdata __initconst = {
- .flags = IMXUART_HAVE_RTSCTS,
-};
-
-static int mx51_3ds_board_keymap[] = {
- KEY(0, 0, KEY_1),
- KEY(0, 1, KEY_2),
- KEY(0, 2, KEY_3),
- KEY(0, 3, KEY_F1),
- KEY(0, 4, KEY_UP),
- KEY(0, 5, KEY_F2),
-
- KEY(1, 0, KEY_4),
- KEY(1, 1, KEY_5),
- KEY(1, 2, KEY_6),
- KEY(1, 3, KEY_LEFT),
- KEY(1, 4, KEY_SELECT),
- KEY(1, 5, KEY_RIGHT),
-
- KEY(2, 0, KEY_7),
- KEY(2, 1, KEY_8),
- KEY(2, 2, KEY_9),
- KEY(2, 3, KEY_F3),
- KEY(2, 4, KEY_DOWN),
- KEY(2, 5, KEY_F4),
-
- KEY(3, 0, KEY_0),
- KEY(3, 1, KEY_OK),
- KEY(3, 2, KEY_ESC),
- KEY(3, 3, KEY_ENTER),
- KEY(3, 4, KEY_MENU),
- KEY(3, 5, KEY_BACK)
-};
-
-static const struct matrix_keymap_data mx51_3ds_map_data __initconst = {
- .keymap = mx51_3ds_board_keymap,
- .keymap_size = ARRAY_SIZE(mx51_3ds_board_keymap),
-};
-
-static int mx51_3ds_spi2_cs[] = {
- MXC_SPI_CS(0),
- MX51_3DS_ECSPI2_CS,
-};
-
-static const struct spi_imx_master mx51_3ds_ecspi2_pdata __initconst = {
- .chipselect = mx51_3ds_spi2_cs,
- .num_chipselect = ARRAY_SIZE(mx51_3ds_spi2_cs),
-};
-
-static struct spi_board_info mx51_3ds_spi_nor_device[] = {
- {
- .modalias = "m25p80",
- .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */
- .bus_num = 1,
- .chip_select = 1,
- .mode = SPI_MODE_0,
- .platform_data = NULL,},
-};
-
-/*
- * Board specific initialization.
- */
-static void __init mx51_3ds_init(void)
-{
- imx51_soc_init();
-
- mxc_iomux_v3_setup_multiple_pads(mx51_3ds_pads,
- ARRAY_SIZE(mx51_3ds_pads));
-
- imx51_add_imx_uart(0, &uart_pdata);
- imx51_add_imx_uart(1, &uart_pdata);
- imx51_add_imx_uart(2, &uart_pdata);
-
- imx51_add_ecspi(1, &mx51_3ds_ecspi2_pdata);
- spi_register_board_info(mx51_3ds_spi_nor_device,
- ARRAY_SIZE(mx51_3ds_spi_nor_device));
-
- if (mxc_expio_init(MX51_CS5_BASE_ADDR, IMX_GPIO_NR(1, 6)))
- printk(KERN_WARNING "Init of the debugboard failed, all "
- "devices on the board are unusable.\n");
-
- imx51_add_sdhci_esdhc_imx(0, NULL);
- imx51_add_imx_keypad(&mx51_3ds_map_data);
- imx51_add_imx2_wdt(0);
-}
-
-static void __init mx51_3ds_timer_init(void)
-{
- mx51_clocks_init(32768, 24000000, 22579200, 0);
-}
-
-static struct sys_timer mx51_3ds_timer = {
- .init = mx51_3ds_timer_init,
-};
-
-MACHINE_START(MX51_3DS, "Freescale MX51 3-Stack Board")
- /* Maintainer: Freescale Semiconductor, Inc. */
- .atag_offset = 0x100,
- .map_io = mx51_map_io,
- .init_early = imx51_init_early,
- .init_irq = mx51_init_irq,
- .handle_irq = imx51_handle_irq,
- .timer = &mx51_3ds_timer,
- .init_machine = mx51_3ds_init,
- .init_late = imx51_init_late,
- .restart = mxc_restart,
-MACHINE_END
diff --git a/arch/arm/mach-imx/mach-mx51_babbage.c b/arch/arm/mach-imx/mach-mx51_babbage.c
index d9a84ca..6c4d7fe 100644
--- a/arch/arm/mach-imx/mach-mx51_babbage.c
+++ b/arch/arm/mach-imx/mach-mx51_babbage.c
@@ -418,10 +418,6 @@
mx51_clocks_init(32768, 24000000, 22579200, 0);
}
-static struct sys_timer mx51_babbage_timer = {
- .init = mx51_babbage_timer_init,
-};
-
MACHINE_START(MX51_BABBAGE, "Freescale MX51 Babbage Board")
/* Maintainer: Amit Kucheria <amit.kucheria@canonical.com> */
.atag_offset = 0x100,
@@ -429,7 +425,7 @@
.init_early = imx51_init_early,
.init_irq = mx51_init_irq,
.handle_irq = imx51_handle_irq,
- .timer = &mx51_babbage_timer,
+ .init_time = mx51_babbage_timer_init,
.init_machine = mx51_babbage_init,
.init_late = imx51_init_late,
.restart = mxc_restart,
diff --git a/arch/arm/mach-imx/mach-mxt_td60.c b/arch/arm/mach-imx/mach-mxt_td60.c
index f4a8c7e..a27faab 100644
--- a/arch/arm/mach-imx/mach-mxt_td60.c
+++ b/arch/arm/mach-imx/mach-mxt_td60.c
@@ -261,10 +261,6 @@
mx27_clocks_init(26000000);
}
-static struct sys_timer mxt_td60_timer = {
- .init = mxt_td60_timer_init,
-};
-
MACHINE_START(MXT_TD60, "Maxtrack i-MXT TD60")
/* maintainer: Maxtrack Industrial */
.atag_offset = 0x100,
@@ -272,7 +268,7 @@
.init_early = imx27_init_early,
.init_irq = mx27_init_irq,
.handle_irq = imx27_handle_irq,
- .timer = &mxt_td60_timer,
+ .init_time = mxt_td60_timer_init,
.init_machine = mxt_td60_board_init,
.restart = mxc_restart,
MACHINE_END
diff --git a/arch/arm/mach-imx/mach-pca100.c b/arch/arm/mach-imx/mach-pca100.c
index eee369f..b8b15bb 100644
--- a/arch/arm/mach-imx/mach-pca100.c
+++ b/arch/arm/mach-imx/mach-pca100.c
@@ -416,10 +416,6 @@
mx27_clocks_init(26000000);
}
-static struct sys_timer pca100_timer = {
- .init = pca100_timer_init,
-};
-
MACHINE_START(PCA100, "phyCARD-i.MX27")
.atag_offset = 0x100,
.map_io = mx27_map_io,
@@ -427,6 +423,6 @@
.init_irq = mx27_init_irq,
.handle_irq = imx27_handle_irq,
.init_machine = pca100_init,
- .timer = &pca100_timer,
+ .init_time = pca100_timer_init,
.restart = mxc_restart,
MACHINE_END
diff --git a/arch/arm/mach-imx/mach-pcm037.c b/arch/arm/mach-imx/mach-pcm037.c
index 547fef1..bc0261e 100644
--- a/arch/arm/mach-imx/mach-pcm037.c
+++ b/arch/arm/mach-imx/mach-pcm037.c
@@ -685,10 +685,6 @@
mx31_clocks_init(26000000);
}
-static struct sys_timer pcm037_timer = {
- .init = pcm037_timer_init,
-};
-
static void __init pcm037_reserve(void)
{
/* reserve 4 MiB for mx3-camera */
@@ -709,7 +705,7 @@
.init_early = imx31_init_early,
.init_irq = mx31_init_irq,
.handle_irq = imx31_handle_irq,
- .timer = &pcm037_timer,
+ .init_time = pcm037_timer_init,
.init_machine = pcm037_init,
.init_late = pcm037_init_late,
.restart = mxc_restart,
diff --git a/arch/arm/mach-imx/mach-pcm038.c b/arch/arm/mach-imx/mach-pcm038.c
index 4aa0d07..e805ac2 100644
--- a/arch/arm/mach-imx/mach-pcm038.c
+++ b/arch/arm/mach-imx/mach-pcm038.c
@@ -346,17 +346,13 @@
mx27_clocks_init(26000000);
}
-static struct sys_timer pcm038_timer = {
- .init = pcm038_timer_init,
-};
-
MACHINE_START(PCM038, "phyCORE-i.MX27")
.atag_offset = 0x100,
.map_io = mx27_map_io,
.init_early = imx27_init_early,
.init_irq = mx27_init_irq,
.handle_irq = imx27_handle_irq,
- .timer = &pcm038_timer,
+ .init_time = pcm038_timer_init,
.init_machine = pcm038_init,
.restart = mxc_restart,
MACHINE_END
diff --git a/arch/arm/mach-imx/mach-pcm043.c b/arch/arm/mach-imx/mach-pcm043.c
index 9244544..8ed533f 100644
--- a/arch/arm/mach-imx/mach-pcm043.c
+++ b/arch/arm/mach-imx/mach-pcm043.c
@@ -394,10 +394,6 @@
mx35_clocks_init();
}
-static struct sys_timer pcm043_timer = {
- .init = pcm043_timer_init,
-};
-
MACHINE_START(PCM043, "Phytec Phycore pcm043")
/* Maintainer: Pengutronix */
.atag_offset = 0x100,
@@ -405,7 +401,7 @@
.init_early = imx35_init_early,
.init_irq = mx35_init_irq,
.handle_irq = imx35_handle_irq,
- .timer = &pcm043_timer,
+ .init_time = pcm043_timer_init,
.init_machine = pcm043_init,
.restart = mxc_restart,
MACHINE_END
diff --git a/arch/arm/mach-imx/mach-qong.c b/arch/arm/mach-imx/mach-qong.c
index 96d9a91..22af27e 100644
--- a/arch/arm/mach-imx/mach-qong.c
+++ b/arch/arm/mach-imx/mach-qong.c
@@ -260,10 +260,6 @@
mx31_clocks_init(26000000);
}
-static struct sys_timer qong_timer = {
- .init = qong_timer_init,
-};
-
MACHINE_START(QONG, "Dave/DENX QongEVB-LITE")
/* Maintainer: DENX Software Engineering GmbH */
.atag_offset = 0x100,
@@ -271,7 +267,7 @@
.init_early = imx31_init_early,
.init_irq = mx31_init_irq,
.handle_irq = imx31_handle_irq,
- .timer = &qong_timer,
+ .init_time = qong_timer_init,
.init_machine = qong_init,
.restart = mxc_restart,
MACHINE_END
diff --git a/arch/arm/mach-imx/mach-scb9328.c b/arch/arm/mach-imx/mach-scb9328.c
index fc97040..b0fa10d 100644
--- a/arch/arm/mach-imx/mach-scb9328.c
+++ b/arch/arm/mach-imx/mach-scb9328.c
@@ -131,10 +131,6 @@
mx1_clocks_init(32000);
}
-static struct sys_timer scb9328_timer = {
- .init = scb9328_timer_init,
-};
-
MACHINE_START(SCB9328, "Synertronixx scb9328")
/* Sascha Hauer */
.atag_offset = 100,
@@ -142,7 +138,7 @@
.init_early = imx1_init_early,
.init_irq = mx1_init_irq,
.handle_irq = imx1_handle_irq,
- .timer = &scb9328_timer,
+ .init_time = scb9328_timer_init,
.init_machine = scb9328_init,
.restart = mxc_restart,
MACHINE_END
diff --git a/arch/arm/mach-imx/mach-vpr200.c b/arch/arm/mach-imx/mach-vpr200.c
index 3aecf91..0910761e 100644
--- a/arch/arm/mach-imx/mach-vpr200.c
+++ b/arch/arm/mach-imx/mach-vpr200.c
@@ -305,17 +305,13 @@
mx35_clocks_init();
}
-static struct sys_timer vpr200_timer = {
- .init = vpr200_timer_init,
-};
-
MACHINE_START(VPR200, "VPR200")
/* Maintainer: Creative Product Design */
.map_io = mx35_map_io,
.init_early = imx35_init_early,
.init_irq = mx35_init_irq,
.handle_irq = imx35_handle_irq,
- .timer = &vpr200_timer,
+ .init_time = vpr200_timer_init,
.init_machine = vpr200_board_init,
.restart = mxc_restart,
MACHINE_END
diff --git a/arch/arm/mach-imx/mm-imx5.c b/arch/arm/mach-imx/mm-imx5.c
index 79d71cf..cf34994 100644
--- a/arch/arm/mach-imx/mm-imx5.c
+++ b/arch/arm/mach-imx/mm-imx5.c
@@ -24,16 +24,6 @@
#include "iomux-v3.h"
/*
- * Define the MX50 memory map.
- */
-static struct map_desc mx50_io_desc[] __initdata = {
- imx_map_entry(MX50, TZIC, MT_DEVICE),
- imx_map_entry(MX50, SPBA0, MT_DEVICE),
- imx_map_entry(MX50, AIPS1, MT_DEVICE),
- imx_map_entry(MX50, AIPS2, MT_DEVICE),
-};
-
-/*
* Define the MX51 memory map.
*/
static struct map_desc mx51_io_desc[] __initdata = {
@@ -59,11 +49,6 @@
* system startup to create static physical to virtual memory mappings
* for the IO modules.
*/
-void __init mx50_map_io(void)
-{
- iotable_init(mx50_io_desc, ARRAY_SIZE(mx50_io_desc));
-}
-
void __init mx51_map_io(void)
{
iotable_init(mx51_io_desc, ARRAY_SIZE(mx51_io_desc));
@@ -74,13 +59,6 @@
iotable_init(mx53_io_desc, ARRAY_SIZE(mx53_io_desc));
}
-void __init imx50_init_early(void)
-{
- mxc_set_cpu_type(MXC_CPU_MX50);
- mxc_iomux_v3_init(MX50_IO_ADDRESS(MX50_IOMUXC_BASE_ADDR));
- mxc_arch_reset_init(MX50_IO_ADDRESS(MX50_WDOG_BASE_ADDR));
-}
-
/*
* The MIPI HSC unit has been removed from the i.MX51 Reference Manual by
* the Freescale marketing division. However this did not remove the
@@ -115,11 +93,6 @@
mxc_arch_reset_init(MX53_IO_ADDRESS(MX53_WDOG1_BASE_ADDR));
}
-void __init mx50_init_irq(void)
-{
- tzic_init_irq(MX50_IO_ADDRESS(MX50_TZIC_BASE_ADDR));
-}
-
void __init mx51_init_irq(void)
{
tzic_init_irq(MX51_IO_ADDRESS(MX51_TZIC_BASE_ADDR));
@@ -148,31 +121,10 @@
.script_addrs = &imx51_sdma_script,
};
-static const struct resource imx50_audmux_res[] __initconst = {
- DEFINE_RES_MEM(MX50_AUDMUX_BASE_ADDR, SZ_16K),
-};
-
static const struct resource imx51_audmux_res[] __initconst = {
DEFINE_RES_MEM(MX51_AUDMUX_BASE_ADDR, SZ_16K),
};
-void __init imx50_soc_init(void)
-{
- mxc_device_init();
-
- /* i.mx50 has the i.mx35 type gpio */
- mxc_register_gpio("imx35-gpio", 0, MX50_GPIO1_BASE_ADDR, SZ_16K, MX50_INT_GPIO1_LOW, MX50_INT_GPIO1_HIGH);
- mxc_register_gpio("imx35-gpio", 1, MX50_GPIO2_BASE_ADDR, SZ_16K, MX50_INT_GPIO2_LOW, MX50_INT_GPIO2_HIGH);
- mxc_register_gpio("imx35-gpio", 2, MX50_GPIO3_BASE_ADDR, SZ_16K, MX50_INT_GPIO3_LOW, MX50_INT_GPIO3_HIGH);
- mxc_register_gpio("imx35-gpio", 3, MX50_GPIO4_BASE_ADDR, SZ_16K, MX50_INT_GPIO4_LOW, MX50_INT_GPIO4_HIGH);
- mxc_register_gpio("imx35-gpio", 4, MX50_GPIO5_BASE_ADDR, SZ_16K, MX50_INT_GPIO5_LOW, MX50_INT_GPIO5_HIGH);
- mxc_register_gpio("imx35-gpio", 5, MX50_GPIO6_BASE_ADDR, SZ_16K, MX50_INT_GPIO6_LOW, MX50_INT_GPIO6_HIGH);
-
- /* i.mx50 has the i.mx31 type audmux */
- platform_device_register_simple("imx31-audmux", 0, imx50_audmux_res,
- ARRAY_SIZE(imx50_audmux_res));
-}
-
void __init imx51_soc_init(void)
{
mxc_device_init();
diff --git a/arch/arm/mach-imx/mx50.h b/arch/arm/mach-imx/mx50.h
deleted file mode 100644
index 09ac19c..0000000
--- a/arch/arm/mach-imx/mx50.h
+++ /dev/null
@@ -1,290 +0,0 @@
-#ifndef __MACH_MX50_H__
-#define __MACH_MX50_H__
-
-/*
- * IROM
- */
-#define MX50_IROM_BASE_ADDR 0x0
-#define MX50_IROM_SIZE SZ_64K
-
-/* TZIC */
-#define MX50_TZIC_BASE_ADDR 0x0fffc000
-#define MX50_TZIC_SIZE SZ_16K
-
-/*
- * IRAM
- */
-#define MX50_IRAM_BASE_ADDR 0xf8000000 /* internal ram */
-#define MX50_IRAM_PARTITIONS 16
-#define MX50_IRAM_SIZE (MX50_IRAM_PARTITIONS * SZ_8K) /* 128KB */
-
-/*
- * Databahn
- */
-#define MX50_DATABAHN_BASE_ADDR 0x14000000
-
-/*
- * Graphics Memory of GPU
- */
-#define MX50_GPU2D_BASE_ADDR 0x20000000
-
-#define MX50_DEBUG_BASE_ADDR 0x40000000
-#define MX50_DEBUG_SIZE SZ_1M
-#define MX50_ETB_BASE_ADDR (MX50_DEBUG_BASE_ADDR + 0x00001000)
-#define MX50_ETM_BASE_ADDR (MX50_DEBUG_BASE_ADDR + 0x00002000)
-#define MX50_TPIU_BASE_ADDR (MX50_DEBUG_BASE_ADDR + 0x00003000)
-#define MX50_CTI0_BASE_ADDR (MX50_DEBUG_BASE_ADDR + 0x00004000)
-#define MX50_CTI1_BASE_ADDR (MX50_DEBUG_BASE_ADDR + 0x00005000)
-#define MX50_CTI2_BASE_ADDR (MX50_DEBUG_BASE_ADDR + 0x00006000)
-#define MX50_CTI3_BASE_ADDR (MX50_DEBUG_BASE_ADDR + 0x00007000)
-#define MX50_CORTEX_DBG_BASE_ADDR (MX50_DEBUG_BASE_ADDR + 0x00008000)
-
-#define MX50_APBHDMA_BASE_ADDR (MX50_DEBUG_BASE_ADDR + 0x01000000)
-#define MX50_OCOTP_CTRL_BASE_ADDR (MX50_DEBUG_BASE_ADDR + 0x01002000)
-#define MX50_DIGCTL_BASE_ADDR (MX50_DEBUG_BASE_ADDR + 0x01004000)
-#define MX50_GPMI_BASE_ADDR (MX50_DEBUG_BASE_ADDR + 0x01006000)
-#define MX50_BCH_BASE_ADDR (MX50_DEBUG_BASE_ADDR + 0x01008000)
-#define MX50_ELCDIF_BASE_ADDR (MX50_DEBUG_BASE_ADDR + 0x0100a000)
-#define MX50_EPXP_BASE_ADDR (MX50_DEBUG_BASE_ADDR + 0x0100c000)
-#define MX50_DCP_BASE_ADDR (MX50_DEBUG_BASE_ADDR + 0x0100e000)
-#define MX50_EPDC_BASE_ADDR (MX50_DEBUG_BASE_ADDR + 0x01010000)
-#define MX50_QOSC_BASE_ADDR (MX50_DEBUG_BASE_ADDR + 0x01012000)
-#define MX50_PERFMON_BASE_ADDR (MX50_DEBUG_BASE_ADDR + 0x01014000)
-#define MX50_SSP_BASE_ADDR (MX50_DEBUG_BASE_ADDR + 0x01016000)
-#define MX50_ANATOP_BASE_ADDR (MX50_DEBUG_BASE_ADDR + 0x01018000)
-#define MX50_NIC_BASE_ADDR (MX50_DEBUG_BASE_ADDR + 0x08000000)
-
-/*
- * SPBA global module enabled #0
- */
-#define MX50_SPBA0_BASE_ADDR 0x50000000
-#define MX50_SPBA0_SIZE SZ_1M
-
-#define MX50_MMC_SDHC1_BASE_ADDR (MX50_SPBA0_BASE_ADDR + 0x00004000)
-#define MX50_MMC_SDHC2_BASE_ADDR (MX50_SPBA0_BASE_ADDR + 0x00008000)
-#define MX50_UART3_BASE_ADDR (MX50_SPBA0_BASE_ADDR + 0x0000c000)
-#define MX50_CSPI1_BASE_ADDR (MX50_SPBA0_BASE_ADDR + 0x00010000)
-#define MX50_SSI2_BASE_ADDR (MX50_SPBA0_BASE_ADDR + 0x00014000)
-#define MX50_MMC_SDHC3_BASE_ADDR (MX50_SPBA0_BASE_ADDR + 0x00020000)
-#define MX50_MMC_SDHC4_BASE_ADDR (MX50_SPBA0_BASE_ADDR + 0x00024000)
-
-/*
- * AIPS 1
- */
-#define MX50_AIPS1_BASE_ADDR 0x53f00000
-#define MX50_AIPS1_SIZE SZ_1M
-
-#define MX50_OTG_BASE_ADDR (MX50_AIPS1_BASE_ADDR + 0x00080000)
-#define MX50_GPIO1_BASE_ADDR (MX50_AIPS1_BASE_ADDR + 0x00084000)
-#define MX50_GPIO2_BASE_ADDR (MX50_AIPS1_BASE_ADDR + 0x00088000)
-#define MX50_GPIO3_BASE_ADDR (MX50_AIPS1_BASE_ADDR + 0x0008c000)
-#define MX50_GPIO4_BASE_ADDR (MX50_AIPS1_BASE_ADDR + 0x00090000)
-#define MX50_KPP_BASE_ADDR (MX50_AIPS1_BASE_ADDR + 0x00094000)
-#define MX50_WDOG_BASE_ADDR (MX50_AIPS1_BASE_ADDR + 0x00098000)
-#define MX50_GPT1_BASE_ADDR (MX50_AIPS1_BASE_ADDR + 0x000a0000)
-#define MX50_SRTC_BASE_ADDR (MX50_AIPS1_BASE_ADDR + 0x000a4000)
-#define MX50_IOMUXC_BASE_ADDR (MX50_AIPS1_BASE_ADDR + 0x000a8000)
-#define MX50_EPIT1_BASE_ADDR (MX50_AIPS1_BASE_ADDR + 0x000ac000)
-#define MX50_PWM1_BASE_ADDR (MX50_AIPS1_BASE_ADDR + 0x000b4000)
-#define MX50_PWM2_BASE_ADDR (MX50_AIPS1_BASE_ADDR + 0x000b8000)
-#define MX50_UART1_BASE_ADDR (MX50_AIPS1_BASE_ADDR + 0x000bc000)
-#define MX50_UART2_BASE_ADDR (MX50_AIPS1_BASE_ADDR + 0x000c0000)
-#define MX50_SRC_BASE_ADDR (MX50_AIPS1_BASE_ADDR + 0x000d0000)
-#define MX50_CCM_BASE_ADDR (MX50_AIPS1_BASE_ADDR + 0x000d4000)
-#define MX50_GPC_BASE_ADDR (MX50_AIPS1_BASE_ADDR + 0x000d8000)
-#define MX50_GPIO5_BASE_ADDR (MX50_AIPS1_BASE_ADDR + 0x000dc000)
-#define MX50_GPIO6_BASE_ADDR (MX50_AIPS1_BASE_ADDR + 0x000e0000)
-#define MX50_I2C3_BASE_ADDR (MX50_AIPS1_BASE_ADDR + 0x000ec000)
-#define MX50_UART4_BASE_ADDR (MX50_AIPS1_BASE_ADDR + 0x000f0000)
-
-#define MX50_MSHC_BASE_ADDR (MX50_AIPS1_BASE_ADDR + 0x000f4000)
-#define MX50_RNGB_BASE_ADDR (MX50_AIPS1_BASE_ADDR + 0x000f8000)
-
-/*
- * AIPS 2
- */
-#define MX50_AIPS2_BASE_ADDR 0x63f00000
-#define MX50_AIPS2_SIZE SZ_1M
-
-#define MX50_PLL1_BASE_ADDR (MX50_AIPS2_BASE_ADDR + 0x00080000)
-#define MX50_PLL2_BASE_ADDR (MX50_AIPS2_BASE_ADDR + 0x00084000)
-#define MX50_PLL3_BASE_ADDR (MX50_AIPS2_BASE_ADDR + 0x00088000)
-#define MX50_UART5_BASE_ADDR (MX50_AIPS2_BASE_ADDR + 0x00090000)
-#define MX50_AHBMAX_BASE_ADDR (MX50_AIPS2_BASE_ADDR + 0x00094000)
-#define MX50_ARM_BASE_ADDR (MX50_AIPS2_BASE_ADDR + 0x000a0000)
-#define MX50_OWIRE_BASE_ADDR (MX50_AIPS2_BASE_ADDR + 0x000a4000)
-#define MX50_CSPI2_BASE_ADDR (MX50_AIPS2_BASE_ADDR + 0x000ac000)
-#define MX50_SDMA_BASE_ADDR (MX50_AIPS2_BASE_ADDR + 0x000b0000)
-#define MX50_ROMCP_BASE_ADDR (MX50_AIPS2_BASE_ADDR + 0x000b8000)
-#define MX50_CSPI3_BASE_ADDR (MX50_AIPS2_BASE_ADDR + 0x000c0000)
-#define MX50_I2C2_BASE_ADDR (MX50_AIPS2_BASE_ADDR + 0x000c4000)
-#define MX50_I2C1_BASE_ADDR (MX50_AIPS2_BASE_ADDR + 0x000c8000)
-#define MX50_SSI1_BASE_ADDR (MX50_AIPS2_BASE_ADDR + 0x000cc000)
-#define MX50_AUDMUX_BASE_ADDR (MX50_AIPS2_BASE_ADDR + 0x000d0000)
-#define MX50_WEIM_BASE_ADDR (MX50_AIPS2_BASE_ADDR + 0x000d8000)
-#define MX50_FEC_BASE_ADDR (MX50_AIPS2_BASE_ADDR + 0x000ec000)
-
-/*
- * Memory regions and CS
- */
-#define MX50_CSD0_BASE_ADDR 0x70000000
-#define MX50_CSD1_BASE_ADDR 0xb0000000
-#define MX50_CS0_BASE_ADDR 0xf0000000
-
-#define MX50_IO_P2V(x) IMX_IO_P2V(x)
-#define MX50_IO_ADDRESS(x) IOMEM(MX50_IO_P2V(x))
-
-/*
- * defines for SPBA modules
- */
-#define MX50_SPBA_SDHC1 0x04
-#define MX50_SPBA_SDHC2 0x08
-#define MX50_SPBA_UART3 0x0c
-#define MX50_SPBA_CSPI1 0x10
-#define MX50_SPBA_SSI2 0x14
-#define MX50_SPBA_SDHC3 0x20
-#define MX50_SPBA_SDHC4 0x24
-#define MX50_SPBA_SPDIF 0x28
-#define MX50_SPBA_ATA 0x30
-#define MX50_SPBA_SLIM 0x34
-#define MX50_SPBA_HSI2C 0x38
-#define MX50_SPBA_CTRL 0x3c
-
-/*
- * DMA request assignments
- */
-#define MX50_DMA_REQ_GPC 1
-#define MX50_DMA_REQ_ATA_UART4_RX 2
-#define MX50_DMA_REQ_ATA_UART4_TX 3
-#define MX50_DMA_REQ_CSPI1_RX 6
-#define MX50_DMA_REQ_CSPI1_TX 7
-#define MX50_DMA_REQ_CSPI2_RX 8
-#define MX50_DMA_REQ_CSPI2_TX 9
-#define MX50_DMA_REQ_I2C3_SDHC3 10
-#define MX50_DMA_REQ_SDHC4 11
-#define MX50_DMA_REQ_UART2_FIRI_RX 12
-#define MX50_DMA_REQ_UART2_FIRI_TX 13
-#define MX50_DMA_REQ_EXT0 14
-#define MX50_DMA_REQ_EXT1 15
-#define MX50_DMA_REQ_UART5_RX 16
-#define MX50_DMA_REQ_UART5_TX 17
-#define MX50_DMA_REQ_UART1_RX 18
-#define MX50_DMA_REQ_UART1_TX 19
-#define MX50_DMA_REQ_I2C1_SDHC1 20
-#define MX50_DMA_REQ_I2C2_SDHC2 21
-#define MX50_DMA_REQ_SSI2_RX2 22
-#define MX50_DMA_REQ_SSI2_TX2 23
-#define MX50_DMA_REQ_SSI2_RX1 24
-#define MX50_DMA_REQ_SSI2_TX1 25
-#define MX50_DMA_REQ_SSI1_RX2 26
-#define MX50_DMA_REQ_SSI1_TX2 27
-#define MX50_DMA_REQ_SSI1_RX1 28
-#define MX50_DMA_REQ_SSI1_TX1 29
-#define MX50_DMA_REQ_CSPI_RX 38
-#define MX50_DMA_REQ_CSPI_TX 39
-#define MX50_DMA_REQ_UART3_RX 42
-#define MX50_DMA_REQ_UART3_TX 43
-
-/*
- * Interrupt numbers
- */
-#include <asm/irq.h>
-#define MX50_INT_MMC_SDHC1 (NR_IRQS_LEGACY + 1)
-#define MX50_INT_MMC_SDHC2 (NR_IRQS_LEGACY + 2)
-#define MX50_INT_MMC_SDHC3 (NR_IRQS_LEGACY + 3)
-#define MX50_INT_MMC_SDHC4 (NR_IRQS_LEGACY + 4)
-#define MX50_INT_DAP (NR_IRQS_LEGACY + 5)
-#define MX50_INT_SDMA (NR_IRQS_LEGACY + 6)
-#define MX50_INT_IOMUX (NR_IRQS_LEGACY + 7)
-#define MX50_INT_UART4 (NR_IRQS_LEGACY + 13)
-#define MX50_INT_USB_H1 (NR_IRQS_LEGACY + 14)
-#define MX50_INT_USB_OTG (NR_IRQS_LEGACY + 18)
-#define MX50_INT_DATABAHN (NR_IRQS_LEGACY + 19)
-#define MX50_INT_ELCDIF (NR_IRQS_LEGACY + 20)
-#define MX50_INT_EPXP (NR_IRQS_LEGACY + 21)
-#define MX50_INT_SRTC_NTZ (NR_IRQS_LEGACY + 24)
-#define MX50_INT_SRTC_TZ (NR_IRQS_LEGACY + 25)
-#define MX50_INT_EPDC (NR_IRQS_LEGACY + 27)
-#define MX50_INT_NIC (NR_IRQS_LEGACY + 28)
-#define MX50_INT_SSI1 (NR_IRQS_LEGACY + 29)
-#define MX50_INT_SSI2 (NR_IRQS_LEGACY + 30)
-#define MX50_INT_UART1 (NR_IRQS_LEGACY + 31)
-#define MX50_INT_UART2 (NR_IRQS_LEGACY + 32)
-#define MX50_INT_UART3 (NR_IRQS_LEGACY + 33)
-#define MX50_INT_RESV34 (NR_IRQS_LEGACY + 34)
-#define MX50_INT_RESV35 (NR_IRQS_LEGACY + 35)
-#define MX50_INT_CSPI1 (NR_IRQS_LEGACY + 36)
-#define MX50_INT_CSPI2 (NR_IRQS_LEGACY + 37)
-#define MX50_INT_CSPI (NR_IRQS_LEGACY + 38)
-#define MX50_INT_GPT (NR_IRQS_LEGACY + 39)
-#define MX50_INT_EPIT1 (NR_IRQS_LEGACY + 40)
-#define MX50_INT_GPIO1_INT7 (NR_IRQS_LEGACY + 42)
-#define MX50_INT_GPIO1_INT6 (NR_IRQS_LEGACY + 43)
-#define MX50_INT_GPIO1_INT5 (NR_IRQS_LEGACY + 44)
-#define MX50_INT_GPIO1_INT4 (NR_IRQS_LEGACY + 45)
-#define MX50_INT_GPIO1_INT3 (NR_IRQS_LEGACY + 46)
-#define MX50_INT_GPIO1_INT2 (NR_IRQS_LEGACY + 47)
-#define MX50_INT_GPIO1_INT1 (NR_IRQS_LEGACY + 48)
-#define MX50_INT_GPIO1_INT0 (NR_IRQS_LEGACY + 49)
-#define MX50_INT_GPIO1_LOW (NR_IRQS_LEGACY + 50)
-#define MX50_INT_GPIO1_HIGH (NR_IRQS_LEGACY + 51)
-#define MX50_INT_GPIO2_LOW (NR_IRQS_LEGACY + 52)
-#define MX50_INT_GPIO2_HIGH (NR_IRQS_LEGACY + 53)
-#define MX50_INT_GPIO3_LOW (NR_IRQS_LEGACY + 54)
-#define MX50_INT_GPIO3_HIGH (NR_IRQS_LEGACY + 55)
-#define MX50_INT_GPIO4_LOW (NR_IRQS_LEGACY + 56)
-#define MX50_INT_GPIO4_HIGH (NR_IRQS_LEGACY + 57)
-#define MX50_INT_WDOG1 (NR_IRQS_LEGACY + 58)
-#define MX50_INT_KPP (NR_IRQS_LEGACY + 60)
-#define MX50_INT_PWM1 (NR_IRQS_LEGACY + 61)
-#define MX50_INT_I2C1 (NR_IRQS_LEGACY + 62)
-#define MX50_INT_I2C2 (NR_IRQS_LEGACY + 63)
-#define MX50_INT_I2C3 (NR_IRQS_LEGACY + 64)
-#define MX50_INT_RESV65 (NR_IRQS_LEGACY + 65)
-#define MX50_INT_DCDC (NR_IRQS_LEGACY + 66)
-#define MX50_INT_THERMAL_ALARM (NR_IRQS_LEGACY + 67)
-#define MX50_INT_ANA3 (NR_IRQS_LEGACY + 68)
-#define MX50_INT_ANA4 (NR_IRQS_LEGACY + 69)
-#define MX50_INT_CCM1 (NR_IRQS_LEGACY + 71)
-#define MX50_INT_CCM2 (NR_IRQS_LEGACY + 72)
-#define MX50_INT_GPC1 (NR_IRQS_LEGACY + 73)
-#define MX50_INT_GPC2 (NR_IRQS_LEGACY + 74)
-#define MX50_INT_SRC (NR_IRQS_LEGACY + 75)
-#define MX50_INT_NM (NR_IRQS_LEGACY + 76)
-#define MX50_INT_PMU (NR_IRQS_LEGACY + 77)
-#define MX50_INT_CTI_IRQ (NR_IRQS_LEGACY + 78)
-#define MX50_INT_CTI1_TG0 (NR_IRQS_LEGACY + 79)
-#define MX50_INT_CTI1_TG1 (NR_IRQS_LEGACY + 80)
-#define MX50_INT_GPU2_IRQ (NR_IRQS_LEGACY + 84)
-#define MX50_INT_GPU2_BUSY (NR_IRQS_LEGACY + 85)
-#define MX50_INT_UART5 (NR_IRQS_LEGACY + 86)
-#define MX50_INT_FEC (NR_IRQS_LEGACY + 87)
-#define MX50_INT_OWIRE (NR_IRQS_LEGACY + 88)
-#define MX50_INT_CTI1_TG2 (NR_IRQS_LEGACY + 89)
-#define MX50_INT_SJC (NR_IRQS_LEGACY + 90)
-#define MX50_INT_DCP_CHAN1_3 (NR_IRQS_LEGACY + 91)
-#define MX50_INT_DCP_CHAN0 (NR_IRQS_LEGACY + 92)
-#define MX50_INT_PWM2 (NR_IRQS_LEGACY + 94)
-#define MX50_INT_RNGB (NR_IRQS_LEGACY + 97)
-#define MX50_INT_CTI1_TG3 (NR_IRQS_LEGACY + 98)
-#define MX50_INT_RAWNAND_BCH (NR_IRQS_LEGACY + 100)
-#define MX50_INT_RAWNAND_GPMI (NR_IRQS_LEGACY + 102)
-#define MX50_INT_GPIO5_LOW (NR_IRQS_LEGACY + 103)
-#define MX50_INT_GPIO5_HIGH (NR_IRQS_LEGACY + 104)
-#define MX50_INT_GPIO6_LOW (NR_IRQS_LEGACY + 105)
-#define MX50_INT_GPIO6_HIGH (NR_IRQS_LEGACY + 106)
-#define MX50_INT_MSHC (NR_IRQS_LEGACY + 109)
-#define MX50_INT_APBHDMA_CHAN0 (NR_IRQS_LEGACY + 110)
-#define MX50_INT_APBHDMA_CHAN1 (NR_IRQS_LEGACY + 111)
-#define MX50_INT_APBHDMA_CHAN2 (NR_IRQS_LEGACY + 112)
-#define MX50_INT_APBHDMA_CHAN3 (NR_IRQS_LEGACY + 113)
-#define MX50_INT_APBHDMA_CHAN4 (NR_IRQS_LEGACY + 114)
-#define MX50_INT_APBHDMA_CHAN5 (NR_IRQS_LEGACY + 115)
-#define MX50_INT_APBHDMA_CHAN6 (NR_IRQS_LEGACY + 116)
-#define MX50_INT_APBHDMA_CHAN7 (NR_IRQS_LEGACY + 117)
-
-#if !defined(__ASSEMBLY__) && !defined(__MXC_BOOT_UNCOMPRESS)
-extern int mx50_revision(void);
-#endif
-
-#endif /* ifndef __MACH_MX50_H__ */
diff --git a/arch/arm/mach-imx/mxc.h b/arch/arm/mach-imx/mxc.h
index d782983..7dce17a 100644
--- a/arch/arm/mach-imx/mxc.h
+++ b/arch/arm/mach-imx/mxc.h
@@ -32,7 +32,6 @@
#define MXC_CPU_MX27 27
#define MXC_CPU_MX31 31
#define MXC_CPU_MX35 35
-#define MXC_CPU_MX50 50
#define MXC_CPU_MX51 51
#define MXC_CPU_MX53 53
@@ -126,18 +125,6 @@
# define cpu_is_mx35() (0)
#endif
-#ifdef CONFIG_SOC_IMX50
-# ifdef mxc_cpu_type
-# undef mxc_cpu_type
-# define mxc_cpu_type __mxc_cpu_type
-# else
-# define mxc_cpu_type MXC_CPU_MX50
-# endif
-# define cpu_is_mx50() (mxc_cpu_type == MXC_CPU_MX50)
-#else
-# define cpu_is_mx50() (0)
-#endif
-
#ifdef CONFIG_SOC_IMX51
# ifdef mxc_cpu_type
# undef mxc_cpu_type
diff --git a/arch/arm/mach-imx/platsmp.c b/arch/arm/mach-imx/platsmp.c
index 66fae88..b2872ec 100644
--- a/arch/arm/mach-imx/platsmp.c
+++ b/arch/arm/mach-imx/platsmp.c
@@ -12,9 +12,9 @@
#include <linux/init.h>
#include <linux/smp.h>
+#include <linux/irqchip/arm-gic.h>
#include <asm/page.h>
#include <asm/smp_scu.h>
-#include <asm/hardware/gic.h>
#include <asm/mach/map.h>
#include "common.h"
@@ -71,8 +71,6 @@
for (i = 0; i < ncores; i++)
set_cpu_possible(i, true);
-
- set_smp_cross_call(gic_raise_softirq);
}
void imx_smp_prepare(void)
diff --git a/arch/arm/mach-imx/pm-imx5.c b/arch/arm/mach-imx/pm-imx5.c
index 2e063c2..f67fd7e 100644
--- a/arch/arm/mach-imx/pm-imx5.c
+++ b/arch/arm/mach-imx/pm-imx5.c
@@ -34,7 +34,7 @@
/*
* set cpu low power mode before WFI instruction. This function is called
- * mx5 because it can be used for mx50, mx51, and mx53.
+ * mx5 because it can be used for mx51, and mx53.
*/
static void mx5_cpu_lp_set(enum mxc_cpu_pwr_mode mode)
{
@@ -85,10 +85,7 @@
__raw_writel(plat_lpc, MXC_CORTEXA8_PLAT_LPC);
__raw_writel(ccm_clpcr, MXC_CCM_CLPCR);
__raw_writel(arm_srpgcr, MXC_SRPG_ARM_SRPGCR);
-
- /* Enable NEON SRPG for all but MX50TO1.0. */
- if (mx50_revision() != IMX_CHIP_REVISION_1_0)
- __raw_writel(arm_srpgcr, MXC_SRPG_NEON_SRPGCR);
+ __raw_writel(arm_srpgcr, MXC_SRPG_NEON_SRPGCR);
if (stop_mode) {
empgc0 |= MXC_SRPGCR_PCR;
diff --git a/arch/arm/mach-imx/time.c b/arch/arm/mach-imx/time.c
index f017302..62769df 100644
--- a/arch/arm/mach-imx/time.c
+++ b/arch/arm/mach-imx/time.c
@@ -256,7 +256,6 @@
static struct clock_event_device clockevent_mxc = {
.name = "mxc_timer1",
.features = CLOCK_EVT_FEAT_ONESHOT,
- .shift = 32,
.set_mode = mxc_set_mode,
.set_next_event = mx1_2_set_next_event,
.rating = 200,
@@ -264,21 +263,13 @@
static int __init mxc_clockevent_init(struct clk *timer_clk)
{
- unsigned int c = clk_get_rate(timer_clk);
-
if (timer_is_v2())
clockevent_mxc.set_next_event = v2_set_next_event;
- clockevent_mxc.mult = div_sc(c, NSEC_PER_SEC,
- clockevent_mxc.shift);
- clockevent_mxc.max_delta_ns =
- clockevent_delta2ns(0xfffffffe, &clockevent_mxc);
- clockevent_mxc.min_delta_ns =
- clockevent_delta2ns(0xff, &clockevent_mxc);
-
clockevent_mxc.cpumask = cpumask_of(0);
-
- clockevents_register_device(&clockevent_mxc);
+ clockevents_config_and_register(&clockevent_mxc,
+ clk_get_rate(timer_clk),
+ 0xff, 0xfffffffe);
return 0;
}
diff --git a/arch/arm/mach-integrator/include/mach/uncompress.h b/arch/arm/mach-integrator/include/mach/uncompress.h
index 30452f0..8f3cc99 100644
--- a/arch/arm/mach-integrator/include/mach/uncompress.h
+++ b/arch/arm/mach-integrator/include/mach/uncompress.h
@@ -46,5 +46,3 @@
* nothing to do
*/
#define arch_decomp_setup()
-
-#define arch_decomp_wdog()
diff --git a/arch/arm/mach-integrator/integrator_ap.c b/arch/arm/mach-integrator/integrator_ap.c
index 592c168..ea96144 100644
--- a/arch/arm/mach-integrator/integrator_ap.c
+++ b/arch/arm/mach-integrator/integrator_ap.c
@@ -425,7 +425,7 @@
#ifdef CONFIG_OF
-static void __init ap_init_timer_of(void)
+static void __init ap_of_timer_init(void)
{
struct device_node *node;
const char *path;
@@ -464,10 +464,6 @@
integrator_clockevent_init(rate, base, irq);
}
-static struct sys_timer ap_of_timer = {
- .init = ap_init_timer_of,
-};
-
static const struct of_device_id fpga_irq_of_match[] __initconst = {
{ .compatible = "arm,versatile-fpga-irq", .data = fpga_irq_of_init, },
{ /* Sentinel */ }
@@ -586,7 +582,7 @@
.init_early = ap_init_early,
.init_irq = ap_init_irq_of,
.handle_irq = fpga_handle_irq,
- .timer = &ap_of_timer,
+ .init_time = ap_of_timer_init,
.init_machine = ap_init_of,
.restart = integrator_restart,
.dt_compat = ap_dt_board_compat,
@@ -637,7 +633,7 @@
.resource = &cfi_flash_resource,
};
-static void __init ap_init_timer(void)
+static void __init ap_timer_init(void)
{
struct clk *clk;
unsigned long rate;
@@ -656,10 +652,6 @@
IRQ_TIMERINT1);
}
-static struct sys_timer ap_timer = {
- .init = ap_init_timer,
-};
-
#define INTEGRATOR_SC_VALID_INT 0x003fffff
static void __init ap_init_irq(void)
@@ -716,7 +708,7 @@
.init_early = ap_init_early,
.init_irq = ap_init_irq,
.handle_irq = fpga_handle_irq,
- .timer = &ap_timer,
+ .init_time = ap_timer_init,
.init_machine = ap_init,
.restart = integrator_restart,
MACHINE_END
diff --git a/arch/arm/mach-integrator/integrator_cp.c b/arch/arm/mach-integrator/integrator_cp.c
index 01a888d..2b0db82 100644
--- a/arch/arm/mach-integrator/integrator_cp.c
+++ b/arch/arm/mach-integrator/integrator_cp.c
@@ -251,7 +251,7 @@
#ifdef CONFIG_OF
-static void __init intcp_timer_init_of(void)
+static void __init cp_of_timer_init(void)
{
struct device_node *node;
const char *path;
@@ -283,10 +283,6 @@
sp804_clockevents_init(base, irq, node->name);
}
-static struct sys_timer cp_of_timer = {
- .init = intcp_timer_init_of,
-};
-
static const struct of_device_id fpga_irq_of_match[] __initconst = {
{ .compatible = "arm,versatile-fpga-irq", .data = fpga_irq_of_init, },
{ /* Sentinel */ }
@@ -390,7 +386,7 @@
.init_early = intcp_init_early,
.init_irq = intcp_init_irq_of,
.handle_irq = fpga_handle_irq,
- .timer = &cp_of_timer,
+ .init_time = cp_of_timer_init,
.init_machine = intcp_init_of,
.restart = integrator_restart,
.dt_compat = intcp_dt_board_compat,
@@ -512,7 +508,7 @@
#define TIMER1_VA_BASE __io_address(INTEGRATOR_TIMER1_BASE)
#define TIMER2_VA_BASE __io_address(INTEGRATOR_TIMER2_BASE)
-static void __init intcp_timer_init(void)
+static void __init cp_timer_init(void)
{
writel(0, TIMER0_VA_BASE + TIMER_CTRL);
writel(0, TIMER1_VA_BASE + TIMER_CTRL);
@@ -522,10 +518,6 @@
sp804_clockevents_init(TIMER1_VA_BASE, IRQ_TIMERINT1, "timer1");
}
-static struct sys_timer cp_timer = {
- .init = intcp_timer_init,
-};
-
#define INTEGRATOR_CP_MMC_IRQS { IRQ_CP_MMCIINT0, IRQ_CP_MMCIINT1 }
#define INTEGRATOR_CP_AACI_IRQS { IRQ_CP_AACIINT }
@@ -565,7 +557,7 @@
.init_early = intcp_init_early,
.init_irq = intcp_init_irq,
.handle_irq = fpga_handle_irq,
- .timer = &cp_timer,
+ .init_time = cp_timer_init,
.init_machine = intcp_init,
.restart = integrator_restart,
MACHINE_END
diff --git a/arch/arm/mach-iop13xx/include/mach/uncompress.h b/arch/arm/mach-iop13xx/include/mach/uncompress.h
index fa4f805..d3791ec 100644
--- a/arch/arm/mach-iop13xx/include/mach/uncompress.h
+++ b/arch/arm/mach-iop13xx/include/mach/uncompress.h
@@ -20,4 +20,3 @@
* nothing to do
*/
#define arch_decomp_setup()
-#define arch_decomp_wdog()
diff --git a/arch/arm/mach-iop13xx/iq81340mc.c b/arch/arm/mach-iop13xx/iq81340mc.c
index e3f3e7d..02a8228 100644
--- a/arch/arm/mach-iop13xx/iq81340mc.c
+++ b/arch/arm/mach-iop13xx/iq81340mc.c
@@ -84,17 +84,13 @@
iop_init_time(bus_freq);
}
-static struct sys_timer iq81340mc_timer = {
- .init = iq81340mc_timer_init,
-};
-
MACHINE_START(IQ81340MC, "Intel IQ81340MC")
/* Maintainer: Dan Williams <dan.j.williams@intel.com> */
.atag_offset = 0x100,
.init_early = iop13xx_init_early,
.map_io = iop13xx_map_io,
.init_irq = iop13xx_init_irq,
- .timer = &iq81340mc_timer,
+ .init_time = iq81340mc_timer_init,
.init_machine = iq81340mc_init,
.restart = iop13xx_restart,
MACHINE_END
diff --git a/arch/arm/mach-iop13xx/iq81340sc.c b/arch/arm/mach-iop13xx/iq81340sc.c
index e947441..1b80f10 100644
--- a/arch/arm/mach-iop13xx/iq81340sc.c
+++ b/arch/arm/mach-iop13xx/iq81340sc.c
@@ -86,17 +86,13 @@
iop_init_time(bus_freq);
}
-static struct sys_timer iq81340sc_timer = {
- .init = iq81340sc_timer_init,
-};
-
MACHINE_START(IQ81340SC, "Intel IQ81340SC")
/* Maintainer: Dan Williams <dan.j.williams@intel.com> */
.atag_offset = 0x100,
.init_early = iop13xx_init_early,
.map_io = iop13xx_map_io,
.init_irq = iop13xx_init_irq,
- .timer = &iq81340sc_timer,
+ .init_time = iq81340sc_timer_init,
.init_machine = iq81340sc_init,
.restart = iop13xx_restart,
MACHINE_END
diff --git a/arch/arm/mach-iop32x/em7210.c b/arch/arm/mach-iop32x/em7210.c
index 9f369f0..31fbb6c 100644
--- a/arch/arm/mach-iop32x/em7210.c
+++ b/arch/arm/mach-iop32x/em7210.c
@@ -40,10 +40,6 @@
iop_init_time(200000000);
}
-static struct sys_timer em7210_timer = {
- .init = em7210_timer_init,
-};
-
/*
* EM7210 RTC
*/
@@ -205,7 +201,7 @@
.atag_offset = 0x100,
.map_io = em7210_map_io,
.init_irq = iop32x_init_irq,
- .timer = &em7210_timer,
+ .init_time = em7210_timer_init,
.init_machine = em7210_init_machine,
.restart = iop3xx_restart,
MACHINE_END
diff --git a/arch/arm/mach-iop32x/glantank.c b/arch/arm/mach-iop32x/glantank.c
index 02e20c3..ac30470 100644
--- a/arch/arm/mach-iop32x/glantank.c
+++ b/arch/arm/mach-iop32x/glantank.c
@@ -44,10 +44,6 @@
iop_init_time(200000000);
}
-static struct sys_timer glantank_timer = {
- .init = glantank_timer_init,
-};
-
/*
* GLAN Tank I/O.
@@ -209,7 +205,7 @@
.atag_offset = 0x100,
.map_io = glantank_map_io,
.init_irq = iop32x_init_irq,
- .timer = &glantank_timer,
+ .init_time = glantank_timer_init,
.init_machine = glantank_init_machine,
.restart = iop3xx_restart,
MACHINE_END
diff --git a/arch/arm/mach-iop32x/include/mach/uncompress.h b/arch/arm/mach-iop32x/include/mach/uncompress.h
index 4fd7154..b3d45fd 100644
--- a/arch/arm/mach-iop32x/include/mach/uncompress.h
+++ b/arch/arm/mach-iop32x/include/mach/uncompress.h
@@ -36,4 +36,3 @@
* nothing to do
*/
#define arch_decomp_setup() __arch_decomp_setup(arch_id)
-#define arch_decomp_wdog()
diff --git a/arch/arm/mach-iop32x/iq31244.c b/arch/arm/mach-iop32x/iq31244.c
index ddd1c7e..f2cd296 100644
--- a/arch/arm/mach-iop32x/iq31244.c
+++ b/arch/arm/mach-iop32x/iq31244.c
@@ -75,10 +75,6 @@
}
}
-static struct sys_timer iq31244_timer = {
- .init = iq31244_timer_init,
-};
-
/*
* IQ31244 I/O.
@@ -314,7 +310,7 @@
.atag_offset = 0x100,
.map_io = iq31244_map_io,
.init_irq = iop32x_init_irq,
- .timer = &iq31244_timer,
+ .init_time = iq31244_timer_init,
.init_machine = iq31244_init_machine,
.restart = iop3xx_restart,
MACHINE_END
@@ -329,7 +325,7 @@
.atag_offset = 0x100,
.map_io = iq31244_map_io,
.init_irq = iop32x_init_irq,
- .timer = &iq31244_timer,
+ .init_time = iq31244_timer_init,
.init_machine = iq31244_init_machine,
.restart = iop3xx_restart,
MACHINE_END
diff --git a/arch/arm/mach-iop32x/iq80321.c b/arch/arm/mach-iop32x/iq80321.c
index bf155e6..015435d 100644
--- a/arch/arm/mach-iop32x/iq80321.c
+++ b/arch/arm/mach-iop32x/iq80321.c
@@ -43,10 +43,6 @@
iop_init_time(200000000);
}
-static struct sys_timer iq80321_timer = {
- .init = iq80321_timer_init,
-};
-
/*
* IQ80321 I/O.
@@ -188,7 +184,7 @@
.atag_offset = 0x100,
.map_io = iq80321_map_io,
.init_irq = iop32x_init_irq,
- .timer = &iq80321_timer,
+ .init_time = iq80321_timer_init,
.init_machine = iq80321_init_machine,
.restart = iop3xx_restart,
MACHINE_END
diff --git a/arch/arm/mach-iop32x/n2100.c b/arch/arm/mach-iop32x/n2100.c
index 5a7ae91..ea0984a 100644
--- a/arch/arm/mach-iop32x/n2100.c
+++ b/arch/arm/mach-iop32x/n2100.c
@@ -50,10 +50,6 @@
iop_init_time(198000000);
}
-static struct sys_timer n2100_timer = {
- .init = n2100_timer_init,
-};
-
/*
* N2100 I/O.
@@ -337,7 +333,7 @@
.atag_offset = 0x100,
.map_io = n2100_map_io,
.init_irq = iop32x_init_irq,
- .timer = &n2100_timer,
+ .init_time = n2100_timer_init,
.init_machine = n2100_init_machine,
.restart = n2100_restart,
MACHINE_END
diff --git a/arch/arm/mach-iop33x/include/mach/uncompress.h b/arch/arm/mach-iop33x/include/mach/uncompress.h
index f99bb84..ed282e1 100644
--- a/arch/arm/mach-iop33x/include/mach/uncompress.h
+++ b/arch/arm/mach-iop33x/include/mach/uncompress.h
@@ -34,4 +34,3 @@
* nothing to do
*/
#define arch_decomp_setup() __arch_decomp_setup(arch_id)
-#define arch_decomp_wdog()
diff --git a/arch/arm/mach-iop33x/iq80331.c b/arch/arm/mach-iop33x/iq80331.c
index e74a7de..c43304a 100644
--- a/arch/arm/mach-iop33x/iq80331.c
+++ b/arch/arm/mach-iop33x/iq80331.c
@@ -45,10 +45,6 @@
iop_init_time(266000000);
}
-static struct sys_timer iq80331_timer = {
- .init = iq80331_timer_init,
-};
-
/*
* IQ80331 PCI.
@@ -143,7 +139,7 @@
.atag_offset = 0x100,
.map_io = iop3xx_map_io,
.init_irq = iop33x_init_irq,
- .timer = &iq80331_timer,
+ .init_time = iq80331_timer_init,
.init_machine = iq80331_init_machine,
.restart = iop3xx_restart,
MACHINE_END
diff --git a/arch/arm/mach-iop33x/iq80332.c b/arch/arm/mach-iop33x/iq80332.c
index e2f5bee..8192987 100644
--- a/arch/arm/mach-iop33x/iq80332.c
+++ b/arch/arm/mach-iop33x/iq80332.c
@@ -45,10 +45,6 @@
iop_init_time(266000000);
}
-static struct sys_timer iq80332_timer = {
- .init = iq80332_timer_init,
-};
-
/*
* IQ80332 PCI.
@@ -143,7 +139,7 @@
.atag_offset = 0x100,
.map_io = iop3xx_map_io,
.init_irq = iop33x_init_irq,
- .timer = &iq80332_timer,
+ .init_time = iq80332_timer_init,
.init_machine = iq80332_init_machine,
.restart = iop3xx_restart,
MACHINE_END
diff --git a/arch/arm/mach-ixp4xx/avila-setup.c b/arch/arm/mach-ixp4xx/avila-setup.c
index 90e42e9..6beec15 100644
--- a/arch/arm/mach-ixp4xx/avila-setup.c
+++ b/arch/arm/mach-ixp4xx/avila-setup.c
@@ -167,7 +167,7 @@
.map_io = ixp4xx_map_io,
.init_early = ixp4xx_init_early,
.init_irq = ixp4xx_init_irq,
- .timer = &ixp4xx_timer,
+ .init_time = ixp4xx_timer_init,
.atag_offset = 0x100,
.init_machine = avila_init,
#if defined(CONFIG_PCI)
@@ -187,7 +187,7 @@
.map_io = ixp4xx_map_io,
.init_early = ixp4xx_init_early,
.init_irq = ixp4xx_init_irq,
- .timer = &ixp4xx_timer,
+ .init_time = ixp4xx_timer_init,
.atag_offset = 0x100,
.init_machine = avila_init,
#if defined(CONFIG_PCI)
diff --git a/arch/arm/mach-ixp4xx/common.c b/arch/arm/mach-ixp4xx/common.c
index 8c0c0e2..1dbeb7c 100644
--- a/arch/arm/mach-ixp4xx/common.c
+++ b/arch/arm/mach-ixp4xx/common.c
@@ -307,10 +307,6 @@
ixp4xx_clockevent_init();
}
-struct sys_timer ixp4xx_timer = {
- .init = ixp4xx_timer_init,
-};
-
static struct pxa2xx_udc_mach_info ixp4xx_udc_info;
void __init ixp4xx_set_udc_info(struct pxa2xx_udc_mach_info *info)
@@ -523,22 +519,15 @@
.name = "ixp4xx timer1",
.features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
.rating = 200,
- .shift = 24,
.set_mode = ixp4xx_set_mode,
.set_next_event = ixp4xx_set_next_event,
};
static void __init ixp4xx_clockevent_init(void)
{
- clockevent_ixp4xx.mult = div_sc(IXP4XX_TIMER_FREQ, NSEC_PER_SEC,
- clockevent_ixp4xx.shift);
- clockevent_ixp4xx.max_delta_ns =
- clockevent_delta2ns(0xfffffffe, &clockevent_ixp4xx);
- clockevent_ixp4xx.min_delta_ns =
- clockevent_delta2ns(0xf, &clockevent_ixp4xx);
clockevent_ixp4xx.cpumask = cpumask_of(0);
-
- clockevents_register_device(&clockevent_ixp4xx);
+ clockevents_config_and_register(&clockevent_ixp4xx, IXP4XX_TIMER_FREQ,
+ 0xf, 0xfffffffe);
}
void ixp4xx_restart(char mode, const char *cmd)
diff --git a/arch/arm/mach-ixp4xx/coyote-setup.c b/arch/arm/mach-ixp4xx/coyote-setup.c
index 1b83110..820cae8 100644
--- a/arch/arm/mach-ixp4xx/coyote-setup.c
+++ b/arch/arm/mach-ixp4xx/coyote-setup.c
@@ -112,7 +112,7 @@
.map_io = ixp4xx_map_io,
.init_early = ixp4xx_init_early,
.init_irq = ixp4xx_init_irq,
- .timer = &ixp4xx_timer,
+ .init_time = ixp4xx_timer_init,
.atag_offset = 0x100,
.init_machine = coyote_init,
#if defined(CONFIG_PCI)
@@ -132,7 +132,7 @@
.map_io = ixp4xx_map_io,
.init_early = ixp4xx_init_early,
.init_irq = ixp4xx_init_irq,
- .timer = &ixp4xx_timer,
+ .init_time = ixp4xx_timer_init,
.atag_offset = 0x100,
.init_machine = coyote_init,
.restart = ixp4xx_restart,
diff --git a/arch/arm/mach-ixp4xx/dsmg600-setup.c b/arch/arm/mach-ixp4xx/dsmg600-setup.c
index 97a0af8..5d413f8 100644
--- a/arch/arm/mach-ixp4xx/dsmg600-setup.c
+++ b/arch/arm/mach-ixp4xx/dsmg600-setup.c
@@ -226,10 +226,6 @@
ixp4xx_timer_init();
}
-static struct sys_timer dsmg600_timer = {
- .init = dsmg600_timer_init,
-};
-
static void __init dsmg600_init(void)
{
ixp4xx_sys_init();
@@ -282,7 +278,7 @@
.map_io = ixp4xx_map_io,
.init_early = ixp4xx_init_early,
.init_irq = ixp4xx_init_irq,
- .timer = &dsmg600_timer,
+ .init_time = dsmg600_timer_init,
.init_machine = dsmg600_init,
#if defined(CONFIG_PCI)
.dma_zone_size = SZ_64M,
diff --git a/arch/arm/mach-ixp4xx/fsg-setup.c b/arch/arm/mach-ixp4xx/fsg-setup.c
index 9175a25..429966b7 100644
--- a/arch/arm/mach-ixp4xx/fsg-setup.c
+++ b/arch/arm/mach-ixp4xx/fsg-setup.c
@@ -272,7 +272,7 @@
.map_io = ixp4xx_map_io,
.init_early = ixp4xx_init_early,
.init_irq = ixp4xx_init_irq,
- .timer = &ixp4xx_timer,
+ .init_time = ixp4xx_timer_init,
.atag_offset = 0x100,
.init_machine = fsg_init,
#if defined(CONFIG_PCI)
diff --git a/arch/arm/mach-ixp4xx/gateway7001-setup.c b/arch/arm/mach-ixp4xx/gateway7001-setup.c
index 033c717..3d24b3f 100644
--- a/arch/arm/mach-ixp4xx/gateway7001-setup.c
+++ b/arch/arm/mach-ixp4xx/gateway7001-setup.c
@@ -99,7 +99,7 @@
.map_io = ixp4xx_map_io,
.init_early = ixp4xx_init_early,
.init_irq = ixp4xx_init_irq,
- .timer = &ixp4xx_timer,
+ .init_time = ixp4xx_timer_init,
.atag_offset = 0x100,
.init_machine = gateway7001_init,
#if defined(CONFIG_PCI)
diff --git a/arch/arm/mach-ixp4xx/goramo_mlr.c b/arch/arm/mach-ixp4xx/goramo_mlr.c
index 53b8348..e54ff49 100644
--- a/arch/arm/mach-ixp4xx/goramo_mlr.c
+++ b/arch/arm/mach-ixp4xx/goramo_mlr.c
@@ -498,7 +498,7 @@
.map_io = ixp4xx_map_io,
.init_early = ixp4xx_init_early,
.init_irq = ixp4xx_init_irq,
- .timer = &ixp4xx_timer,
+ .init_time = ixp4xx_timer_init,
.atag_offset = 0x100,
.init_machine = gmlr_init,
#if defined(CONFIG_PCI)
diff --git a/arch/arm/mach-ixp4xx/gtwx5715-setup.c b/arch/arm/mach-ixp4xx/gtwx5715-setup.c
index 18ebc6b..16a1299 100644
--- a/arch/arm/mach-ixp4xx/gtwx5715-setup.c
+++ b/arch/arm/mach-ixp4xx/gtwx5715-setup.c
@@ -167,7 +167,7 @@
.map_io = ixp4xx_map_io,
.init_early = ixp4xx_init_early,
.init_irq = ixp4xx_init_irq,
- .timer = &ixp4xx_timer,
+ .init_time = ixp4xx_timer_init,
.atag_offset = 0x100,
.init_machine = gtwx5715_init,
#if defined(CONFIG_PCI)
diff --git a/arch/arm/mach-ixp4xx/include/mach/platform.h b/arch/arm/mach-ixp4xx/include/mach/platform.h
index 5bce94a..db5afb6 100644
--- a/arch/arm/mach-ixp4xx/include/mach/platform.h
+++ b/arch/arm/mach-ixp4xx/include/mach/platform.h
@@ -89,8 +89,6 @@
void __iomem *cs1;
};
-struct sys_timer;
-
#define IXP4XX_ETH_NPEA 0x00
#define IXP4XX_ETH_NPEB 0x10
#define IXP4XX_ETH_NPEC 0x20
@@ -125,7 +123,6 @@
extern void ixp4xx_init_irq(void);
extern void ixp4xx_sys_init(void);
extern void ixp4xx_timer_init(void);
-extern struct sys_timer ixp4xx_timer;
extern void ixp4xx_restart(char, const char *);
extern void ixp4xx_pci_preinit(void);
struct pci_sys_data;
diff --git a/arch/arm/mach-ixp4xx/include/mach/uncompress.h b/arch/arm/mach-ixp4xx/include/mach/uncompress.h
index eb945a9..7b25c02 100644
--- a/arch/arm/mach-ixp4xx/include/mach/uncompress.h
+++ b/arch/arm/mach-ixp4xx/include/mach/uncompress.h
@@ -53,6 +53,4 @@
*/
#define arch_decomp_setup() __arch_decomp_setup(arch_id)
-#define arch_decomp_wdog()
-
#endif
diff --git a/arch/arm/mach-ixp4xx/ixdp425-setup.c b/arch/arm/mach-ixp4xx/ixdp425-setup.c
index 108a9d3..22d688b 100644
--- a/arch/arm/mach-ixp4xx/ixdp425-setup.c
+++ b/arch/arm/mach-ixp4xx/ixdp425-setup.c
@@ -252,7 +252,7 @@
.map_io = ixp4xx_map_io,
.init_early = ixp4xx_init_early,
.init_irq = ixp4xx_init_irq,
- .timer = &ixp4xx_timer,
+ .init_time = ixp4xx_timer_init,
.atag_offset = 0x100,
.init_machine = ixdp425_init,
#if defined(CONFIG_PCI)
@@ -268,7 +268,7 @@
.map_io = ixp4xx_map_io,
.init_early = ixp4xx_init_early,
.init_irq = ixp4xx_init_irq,
- .timer = &ixp4xx_timer,
+ .init_time = ixp4xx_timer_init,
.atag_offset = 0x100,
.init_machine = ixdp425_init,
#if defined(CONFIG_PCI)
@@ -283,7 +283,7 @@
.map_io = ixp4xx_map_io,
.init_early = ixp4xx_init_early,
.init_irq = ixp4xx_init_irq,
- .timer = &ixp4xx_timer,
+ .init_time = ixp4xx_timer_init,
.atag_offset = 0x100,
.init_machine = ixdp425_init,
#if defined(CONFIG_PCI)
@@ -298,7 +298,7 @@
.map_io = ixp4xx_map_io,
.init_early = ixp4xx_init_early,
.init_irq = ixp4xx_init_irq,
- .timer = &ixp4xx_timer,
+ .init_time = ixp4xx_timer_init,
.atag_offset = 0x100,
.init_machine = ixdp425_init,
#if defined(CONFIG_PCI)
diff --git a/arch/arm/mach-ixp4xx/nas100d-setup.c b/arch/arm/mach-ixp4xx/nas100d-setup.c
index 33cb095..ed667ce 100644
--- a/arch/arm/mach-ixp4xx/nas100d-setup.c
+++ b/arch/arm/mach-ixp4xx/nas100d-setup.c
@@ -317,7 +317,7 @@
.map_io = ixp4xx_map_io,
.init_early = ixp4xx_init_early,
.init_irq = ixp4xx_init_irq,
- .timer = &ixp4xx_timer,
+ .init_time = ixp4xx_timer_init,
.init_machine = nas100d_init,
#if defined(CONFIG_PCI)
.dma_zone_size = SZ_64M,
diff --git a/arch/arm/mach-ixp4xx/nslu2-setup.c b/arch/arm/mach-ixp4xx/nslu2-setup.c
index e2903fa..7e55236 100644
--- a/arch/arm/mach-ixp4xx/nslu2-setup.c
+++ b/arch/arm/mach-ixp4xx/nslu2-setup.c
@@ -232,10 +232,6 @@
ixp4xx_timer_init();
}
-static struct sys_timer nslu2_timer = {
- .init = nslu2_timer_init,
-};
-
static void __init nslu2_init(void)
{
uint8_t __iomem *f;
@@ -303,7 +299,7 @@
.map_io = ixp4xx_map_io,
.init_early = ixp4xx_init_early,
.init_irq = ixp4xx_init_irq,
- .timer = &nslu2_timer,
+ .init_time = nslu2_timer_init,
.init_machine = nslu2_init,
#if defined(CONFIG_PCI)
.dma_zone_size = SZ_64M,
diff --git a/arch/arm/mach-ixp4xx/omixp-setup.c b/arch/arm/mach-ixp4xx/omixp-setup.c
index 158ddb7..46a89f5 100644
--- a/arch/arm/mach-ixp4xx/omixp-setup.c
+++ b/arch/arm/mach-ixp4xx/omixp-setup.c
@@ -245,7 +245,7 @@
.map_io = ixp4xx_map_io,
.init_early = ixp4xx_init_early,
.init_irq = ixp4xx_init_irq,
- .timer = &ixp4xx_timer,
+ .init_time = ixp4xx_timer_init,
.init_machine = omixp_init,
.restart = ixp4xx_restart,
MACHINE_END
@@ -257,7 +257,7 @@
.map_io = ixp4xx_map_io,
.init_early = ixp4xx_init_early,
.init_irq = ixp4xx_init_irq,
- .timer = &ixp4xx_timer,
+ .init_time = ixp4xx_timer_init,
.init_machine = omixp_init,
#if defined(CONFIG_PCI)
.dma_zone_size = SZ_64M,
@@ -272,7 +272,7 @@
.map_io = ixp4xx_map_io,
.init_early = ixp4xx_init_early,
.init_irq = ixp4xx_init_irq,
- .timer = &ixp4xx_timer,
+ .init_time = ixp4xx_timer_init,
.init_machine = omixp_init,
.restart = ixp4xx_restart,
MACHINE_END
diff --git a/arch/arm/mach-ixp4xx/vulcan-setup.c b/arch/arm/mach-ixp4xx/vulcan-setup.c
index 2798f43..d42730a 100644
--- a/arch/arm/mach-ixp4xx/vulcan-setup.c
+++ b/arch/arm/mach-ixp4xx/vulcan-setup.c
@@ -239,7 +239,7 @@
.map_io = ixp4xx_map_io,
.init_early = ixp4xx_init_early,
.init_irq = ixp4xx_init_irq,
- .timer = &ixp4xx_timer,
+ .init_time = ixp4xx_timer_init,
.atag_offset = 0x100,
.init_machine = vulcan_init,
#if defined(CONFIG_PCI)
diff --git a/arch/arm/mach-ixp4xx/wg302v2-setup.c b/arch/arm/mach-ixp4xx/wg302v2-setup.c
index a785175..8f9ea2f 100644
--- a/arch/arm/mach-ixp4xx/wg302v2-setup.c
+++ b/arch/arm/mach-ixp4xx/wg302v2-setup.c
@@ -100,7 +100,7 @@
.map_io = ixp4xx_map_io,
.init_early = ixp4xx_init_early,
.init_irq = ixp4xx_init_irq,
- .timer = &ixp4xx_timer,
+ .init_time = ixp4xx_timer_init,
.atag_offset = 0x100,
.init_machine = wg302v2_init,
#if defined(CONFIG_PCI)
diff --git a/arch/arm/mach-kirkwood/board-dt.c b/arch/arm/mach-kirkwood/board-dt.c
index de4fd2b..d4af5c1 100644
--- a/arch/arm/mach-kirkwood/board-dt.c
+++ b/arch/arm/mach-kirkwood/board-dt.c
@@ -183,7 +183,7 @@
.map_io = kirkwood_map_io,
.init_early = kirkwood_init_early,
.init_irq = orion_dt_init_irq,
- .timer = &kirkwood_timer,
+ .init_time = kirkwood_timer_init,
.init_machine = kirkwood_dt_init,
.restart = kirkwood_restart,
.dt_compat = kirkwood_dt_board_compat,
diff --git a/arch/arm/mach-kirkwood/board-ib62x0.c b/arch/arm/mach-kirkwood/board-ib62x0.c
index 9f6f496..9a857ae 100644
--- a/arch/arm/mach-kirkwood/board-ib62x0.c
+++ b/arch/arm/mach-kirkwood/board-ib62x0.c
@@ -14,7 +14,6 @@
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/mv643xx_eth.h>
-#include <linux/input.h>
#include "common.h"
static struct mv643xx_eth_platform_data ib62x0_ge00_data = {
diff --git a/arch/arm/mach-kirkwood/board-mplcec4.c b/arch/arm/mach-kirkwood/board-mplcec4.c
index 56bfe5a..3264925 100644
--- a/arch/arm/mach-kirkwood/board-mplcec4.c
+++ b/arch/arm/mach-kirkwood/board-mplcec4.c
@@ -14,7 +14,6 @@
#include <linux/mv643xx_eth.h>
#include <linux/platform_data/mmc-mvsdio.h>
#include "common.h"
-#include "mpp.h"
static struct mv643xx_eth_platform_data mplcec4_ge00_data = {
.phy_addr = MV643XX_ETH_PHY_ADDR(1),
diff --git a/arch/arm/mach-kirkwood/board-nsa310.c b/arch/arm/mach-kirkwood/board-nsa310.c
index f58d2e1..970174a 100644
--- a/arch/arm/mach-kirkwood/board-nsa310.c
+++ b/arch/arm/mach-kirkwood/board-nsa310.c
@@ -10,12 +10,10 @@
#include <linux/kernel.h>
#include <linux/init.h>
-#include <linux/i2c.h>
#include <linux/gpio.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
+#include <linux/i2c.h>
#include <mach/kirkwood.h>
+#include <linux/of.h>
#include "common.h"
#include "mpp.h"
@@ -79,14 +77,10 @@
void __init nsa310_init(void)
{
- u32 dev, rev;
-
kirkwood_mpp_conf(nsa310_mpp_config);
nsa310_gpio_init();
- kirkwood_pcie_id(&dev, &rev);
-
i2c_register_board_info(0, ARRAY_AND_SIZE(nsa310_i2c_info));
}
diff --git a/arch/arm/mach-kirkwood/common.c b/arch/arm/mach-kirkwood/common.c
index bac21a5..b5ad4df 100644
--- a/arch/arm/mach-kirkwood/common.c
+++ b/arch/arm/mach-kirkwood/common.c
@@ -530,7 +530,7 @@
return 166666667;
}
-static void __init kirkwood_timer_init(void)
+void __init kirkwood_timer_init(void)
{
kirkwood_tclk = kirkwood_find_tclk();
@@ -538,10 +538,6 @@
IRQ_KIRKWOOD_BRIDGE, kirkwood_tclk);
}
-struct sys_timer kirkwood_timer = {
- .init = kirkwood_timer_init,
-};
-
/*****************************************************************************
* Audio
****************************************************************************/
diff --git a/arch/arm/mach-kirkwood/common.h b/arch/arm/mach-kirkwood/common.h
index 5ffa57f..283ab61 100644
--- a/arch/arm/mach-kirkwood/common.h
+++ b/arch/arm/mach-kirkwood/common.h
@@ -156,7 +156,7 @@
void kirkwood_crypto_init(void);
extern int kirkwood_tclk;
-extern struct sys_timer kirkwood_timer;
+extern void kirkwood_timer_init(void);
#define ARRAY_AND_SIZE(x) (x), ARRAY_SIZE(x)
diff --git a/arch/arm/mach-kirkwood/d2net_v2-setup.c b/arch/arm/mach-kirkwood/d2net_v2-setup.c
index 2c1a453..4534180 100644
--- a/arch/arm/mach-kirkwood/d2net_v2-setup.c
+++ b/arch/arm/mach-kirkwood/d2net_v2-setup.c
@@ -226,6 +226,6 @@
.map_io = kirkwood_map_io,
.init_early = kirkwood_init_early,
.init_irq = kirkwood_init_irq,
- .timer = &kirkwood_timer,
+ .init_time = kirkwood_timer_init,
.restart = kirkwood_restart,
MACHINE_END
diff --git a/arch/arm/mach-kirkwood/db88f6281-bp-setup.c b/arch/arm/mach-kirkwood/db88f6281-bp-setup.c
index c49b177..5a369fe 100644
--- a/arch/arm/mach-kirkwood/db88f6281-bp-setup.c
+++ b/arch/arm/mach-kirkwood/db88f6281-bp-setup.c
@@ -103,6 +103,6 @@
.map_io = kirkwood_map_io,
.init_early = kirkwood_init_early,
.init_irq = kirkwood_init_irq,
- .timer = &kirkwood_timer,
+ .init_time = kirkwood_timer_init,
.restart = kirkwood_restart,
MACHINE_END
diff --git a/arch/arm/mach-kirkwood/dockstar-setup.c b/arch/arm/mach-kirkwood/dockstar-setup.c
index 791a98f..060ccf9 100644
--- a/arch/arm/mach-kirkwood/dockstar-setup.c
+++ b/arch/arm/mach-kirkwood/dockstar-setup.c
@@ -19,7 +19,6 @@
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <mach/kirkwood.h>
-#include <linux/platform_data/mmc-mvsdio.h>
#include "common.h"
#include "mpp.h"
@@ -107,6 +106,6 @@
.map_io = kirkwood_map_io,
.init_early = kirkwood_init_early,
.init_irq = kirkwood_init_irq,
- .timer = &kirkwood_timer,
+ .init_time = kirkwood_timer_init,
.restart = kirkwood_restart,
MACHINE_END
diff --git a/arch/arm/mach-kirkwood/guruplug-setup.c b/arch/arm/mach-kirkwood/guruplug-setup.c
index 7cb55f9..1c6e736 100644
--- a/arch/arm/mach-kirkwood/guruplug-setup.c
+++ b/arch/arm/mach-kirkwood/guruplug-setup.c
@@ -126,6 +126,6 @@
.map_io = kirkwood_map_io,
.init_early = kirkwood_init_early,
.init_irq = kirkwood_init_irq,
- .timer = &kirkwood_timer,
+ .init_time = kirkwood_timer_init,
.restart = kirkwood_restart,
MACHINE_END
diff --git a/arch/arm/mach-kirkwood/include/mach/uncompress.h b/arch/arm/mach-kirkwood/include/mach/uncompress.h
index 75d5497..5bca553 100644
--- a/arch/arm/mach-kirkwood/include/mach/uncompress.h
+++ b/arch/arm/mach-kirkwood/include/mach/uncompress.h
@@ -44,4 +44,3 @@
* nothing to do
*/
#define arch_decomp_setup()
-#define arch_decomp_wdog()
diff --git a/arch/arm/mach-kirkwood/mv88f6281gtw_ge-setup.c b/arch/arm/mach-kirkwood/mv88f6281gtw_ge-setup.c
index 6d8364a..ba384b9 100644
--- a/arch/arm/mach-kirkwood/mv88f6281gtw_ge-setup.c
+++ b/arch/arm/mach-kirkwood/mv88f6281gtw_ge-setup.c
@@ -167,6 +167,6 @@
.map_io = kirkwood_map_io,
.init_early = kirkwood_init_early,
.init_irq = kirkwood_init_irq,
- .timer = &kirkwood_timer,
+ .init_time = kirkwood_timer_init,
.restart = kirkwood_restart,
MACHINE_END
diff --git a/arch/arm/mach-kirkwood/netspace_v2-setup.c b/arch/arm/mach-kirkwood/netspace_v2-setup.c
index 728e86d..3b70661 100644
--- a/arch/arm/mach-kirkwood/netspace_v2-setup.c
+++ b/arch/arm/mach-kirkwood/netspace_v2-setup.c
@@ -263,7 +263,7 @@
.map_io = kirkwood_map_io,
.init_early = kirkwood_init_early,
.init_irq = kirkwood_init_irq,
- .timer = &kirkwood_timer,
+ .init_time = kirkwood_timer_init,
.restart = kirkwood_restart,
MACHINE_END
#endif
@@ -275,7 +275,7 @@
.map_io = kirkwood_map_io,
.init_early = kirkwood_init_early,
.init_irq = kirkwood_init_irq,
- .timer = &kirkwood_timer,
+ .init_time = kirkwood_timer_init,
.restart = kirkwood_restart,
MACHINE_END
#endif
@@ -287,7 +287,7 @@
.map_io = kirkwood_map_io,
.init_early = kirkwood_init_early,
.init_irq = kirkwood_init_irq,
- .timer = &kirkwood_timer,
+ .init_time = kirkwood_timer_init,
.restart = kirkwood_restart,
MACHINE_END
#endif
diff --git a/arch/arm/mach-kirkwood/netxbig_v2-setup.c b/arch/arm/mach-kirkwood/netxbig_v2-setup.c
index a3b0914..913d032 100644
--- a/arch/arm/mach-kirkwood/netxbig_v2-setup.c
+++ b/arch/arm/mach-kirkwood/netxbig_v2-setup.c
@@ -404,7 +404,7 @@
.map_io = kirkwood_map_io,
.init_early = kirkwood_init_early,
.init_irq = kirkwood_init_irq,
- .timer = &kirkwood_timer,
+ .init_time = kirkwood_timer_init,
.restart = kirkwood_restart,
MACHINE_END
#endif
@@ -416,7 +416,7 @@
.map_io = kirkwood_map_io,
.init_early = kirkwood_init_early,
.init_irq = kirkwood_init_irq,
- .timer = &kirkwood_timer,
+ .init_time = kirkwood_timer_init,
.restart = kirkwood_restart,
MACHINE_END
#endif
diff --git a/arch/arm/mach-kirkwood/openrd-setup.c b/arch/arm/mach-kirkwood/openrd-setup.c
index 7e81e9b..8ddd69f 100644
--- a/arch/arm/mach-kirkwood/openrd-setup.c
+++ b/arch/arm/mach-kirkwood/openrd-setup.c
@@ -221,7 +221,7 @@
.map_io = kirkwood_map_io,
.init_early = kirkwood_init_early,
.init_irq = kirkwood_init_irq,
- .timer = &kirkwood_timer,
+ .init_time = kirkwood_timer_init,
.restart = kirkwood_restart,
MACHINE_END
#endif
@@ -234,7 +234,7 @@
.map_io = kirkwood_map_io,
.init_early = kirkwood_init_early,
.init_irq = kirkwood_init_irq,
- .timer = &kirkwood_timer,
+ .init_time = kirkwood_timer_init,
.restart = kirkwood_restart,
MACHINE_END
#endif
@@ -247,7 +247,7 @@
.map_io = kirkwood_map_io,
.init_early = kirkwood_init_early,
.init_irq = kirkwood_init_irq,
- .timer = &kirkwood_timer,
+ .init_time = kirkwood_timer_init,
.restart = kirkwood_restart,
MACHINE_END
#endif
diff --git a/arch/arm/mach-kirkwood/rd88f6192-nas-setup.c b/arch/arm/mach-kirkwood/rd88f6192-nas-setup.c
index 19072c8..e4fd312 100644
--- a/arch/arm/mach-kirkwood/rd88f6192-nas-setup.c
+++ b/arch/arm/mach-kirkwood/rd88f6192-nas-setup.c
@@ -84,6 +84,6 @@
.map_io = kirkwood_map_io,
.init_early = kirkwood_init_early,
.init_irq = kirkwood_init_irq,
- .timer = &kirkwood_timer,
+ .init_time = kirkwood_timer_init,
.restart = kirkwood_restart,
MACHINE_END
diff --git a/arch/arm/mach-kirkwood/rd88f6281-setup.c b/arch/arm/mach-kirkwood/rd88f6281-setup.c
index 9717101..c7d93b4 100644
--- a/arch/arm/mach-kirkwood/rd88f6281-setup.c
+++ b/arch/arm/mach-kirkwood/rd88f6281-setup.c
@@ -120,6 +120,6 @@
.map_io = kirkwood_map_io,
.init_early = kirkwood_init_early,
.init_irq = kirkwood_init_irq,
- .timer = &kirkwood_timer,
+ .init_time = kirkwood_timer_init,
.restart = kirkwood_restart,
MACHINE_END
diff --git a/arch/arm/mach-kirkwood/sheevaplug-setup.c b/arch/arm/mach-kirkwood/sheevaplug-setup.c
index 8a17594..55b68fa 100644
--- a/arch/arm/mach-kirkwood/sheevaplug-setup.c
+++ b/arch/arm/mach-kirkwood/sheevaplug-setup.c
@@ -143,7 +143,7 @@
.map_io = kirkwood_map_io,
.init_early = kirkwood_init_early,
.init_irq = kirkwood_init_irq,
- .timer = &kirkwood_timer,
+ .init_time = kirkwood_timer_init,
.restart = kirkwood_restart,
MACHINE_END
#endif
@@ -155,7 +155,7 @@
.map_io = kirkwood_map_io,
.init_early = kirkwood_init_early,
.init_irq = kirkwood_init_irq,
- .timer = &kirkwood_timer,
+ .init_time = kirkwood_timer_init,
.restart = kirkwood_restart,
MACHINE_END
#endif
diff --git a/arch/arm/mach-kirkwood/t5325-setup.c b/arch/arm/mach-kirkwood/t5325-setup.c
index f2daf71..8736f8c 100644
--- a/arch/arm/mach-kirkwood/t5325-setup.c
+++ b/arch/arm/mach-kirkwood/t5325-setup.c
@@ -211,6 +211,6 @@
.map_io = kirkwood_map_io,
.init_early = kirkwood_init_early,
.init_irq = kirkwood_init_irq,
- .timer = &kirkwood_timer,
+ .init_time = kirkwood_timer_init,
.restart = kirkwood_restart,
MACHINE_END
diff --git a/arch/arm/mach-kirkwood/ts219-setup.c b/arch/arm/mach-kirkwood/ts219-setup.c
index 73e2b6c..283abff 100644
--- a/arch/arm/mach-kirkwood/ts219-setup.c
+++ b/arch/arm/mach-kirkwood/ts219-setup.c
@@ -137,6 +137,6 @@
.map_io = kirkwood_map_io,
.init_early = kirkwood_init_early,
.init_irq = kirkwood_init_irq,
- .timer = &kirkwood_timer,
+ .init_time = kirkwood_timer_init,
.restart = kirkwood_restart,
MACHINE_END
diff --git a/arch/arm/mach-kirkwood/ts41x-setup.c b/arch/arm/mach-kirkwood/ts41x-setup.c
index e4c6127..81d5858 100644
--- a/arch/arm/mach-kirkwood/ts41x-setup.c
+++ b/arch/arm/mach-kirkwood/ts41x-setup.c
@@ -181,6 +181,6 @@
.map_io = kirkwood_map_io,
.init_early = kirkwood_init_early,
.init_irq = kirkwood_init_irq,
- .timer = &kirkwood_timer,
+ .init_time = kirkwood_timer_init,
.restart = kirkwood_restart,
MACHINE_END
diff --git a/arch/arm/mach-ks8695/board-acs5k.c b/arch/arm/mach-ks8695/board-acs5k.c
index b0c306c..456d638 100644
--- a/arch/arm/mach-ks8695/board-acs5k.c
+++ b/arch/arm/mach-ks8695/board-acs5k.c
@@ -227,6 +227,6 @@
.map_io = ks8695_map_io,
.init_irq = ks8695_init_irq,
.init_machine = acs5k_init,
- .timer = &ks8695_timer,
+ .init_time = ks8695_timer_init,
.restart = ks8695_restart,
MACHINE_END
diff --git a/arch/arm/mach-ks8695/board-dsm320.c b/arch/arm/mach-ks8695/board-dsm320.c
index e0d36ce..d37c218 100644
--- a/arch/arm/mach-ks8695/board-dsm320.c
+++ b/arch/arm/mach-ks8695/board-dsm320.c
@@ -125,6 +125,6 @@
.map_io = ks8695_map_io,
.init_irq = ks8695_init_irq,
.init_machine = dsm320_init,
- .timer = &ks8695_timer,
+ .init_time = ks8695_timer_init,
.restart = ks8695_restart,
MACHINE_END
diff --git a/arch/arm/mach-ks8695/board-micrel.c b/arch/arm/mach-ks8695/board-micrel.c
index a827072..3acbdfd 100644
--- a/arch/arm/mach-ks8695/board-micrel.c
+++ b/arch/arm/mach-ks8695/board-micrel.c
@@ -57,6 +57,6 @@
.map_io = ks8695_map_io,
.init_irq = ks8695_init_irq,
.init_machine = micrel_init,
- .timer = &ks8695_timer,
+ .init_time = ks8695_timer_init,
.restart = ks8695_restart,
MACHINE_END
diff --git a/arch/arm/mach-ks8695/board-og.c b/arch/arm/mach-ks8695/board-og.c
index 1623ba4..002bc61 100644
--- a/arch/arm/mach-ks8695/board-og.c
+++ b/arch/arm/mach-ks8695/board-og.c
@@ -145,7 +145,7 @@
.map_io = ks8695_map_io,
.init_irq = ks8695_init_irq,
.init_machine = og_init,
- .timer = &ks8695_timer,
+ .init_time = ks8695_timer_init,
.restart = ks8695_restart,
MACHINE_END
#endif
@@ -157,7 +157,7 @@
.map_io = ks8695_map_io,
.init_irq = ks8695_init_irq,
.init_machine = og_init,
- .timer = &ks8695_timer,
+ .init_time = ks8695_timer_init,
.restart = ks8695_restart,
MACHINE_END
#endif
@@ -169,7 +169,7 @@
.map_io = ks8695_map_io,
.init_irq = ks8695_init_irq,
.init_machine = og_init,
- .timer = &ks8695_timer,
+ .init_time = ks8695_timer_init,
.restart = ks8695_restart,
MACHINE_END
#endif
@@ -181,7 +181,7 @@
.map_io = ks8695_map_io,
.init_irq = ks8695_init_irq,
.init_machine = og_init,
- .timer = &ks8695_timer,
+ .init_time = ks8695_timer_init,
.restart = ks8695_restart,
MACHINE_END
#endif
@@ -193,7 +193,7 @@
.map_io = ks8695_map_io,
.init_irq = ks8695_init_irq,
.init_machine = og_init,
- .timer = &ks8695_timer,
+ .init_time = ks8695_timer_init,
.restart = ks8695_restart,
MACHINE_END
#endif
diff --git a/arch/arm/mach-ks8695/board-sg.c b/arch/arm/mach-ks8695/board-sg.c
index f35b98b..fdf2352 100644
--- a/arch/arm/mach-ks8695/board-sg.c
+++ b/arch/arm/mach-ks8695/board-sg.c
@@ -91,7 +91,7 @@
.map_io = ks8695_map_io,
.init_irq = ks8695_init_irq,
.init_machine = sg_init,
- .timer = &ks8695_timer,
+ .init_time = ks8695_timer_init,
.restart = ks8695_restart,
MACHINE_END
#endif
@@ -103,7 +103,7 @@
.map_io = ks8695_map_io,
.init_irq = ks8695_init_irq,
.init_machine = sg_init,
- .timer = &ks8695_timer,
+ .init_time = ks8695_timer_init,
.restart = ks8695_restart,
MACHINE_END
#endif
@@ -115,7 +115,7 @@
.map_io = ks8695_map_io,
.init_irq = ks8695_init_irq,
.init_machine = sg_init,
- .timer = &ks8695_timer,
+ .init_time = ks8695_timer_init,
.restart = ks8695_restart,
MACHINE_END
#endif
diff --git a/arch/arm/mach-ks8695/generic.h b/arch/arm/mach-ks8695/generic.h
index f8bdb11..6e97ce4 100644
--- a/arch/arm/mach-ks8695/generic.h
+++ b/arch/arm/mach-ks8695/generic.h
@@ -13,4 +13,4 @@
extern __init void ks8695_map_io(void);
extern __init void ks8695_init_irq(void);
extern void ks8695_restart(char, const char *);
-extern struct sys_timer ks8695_timer;
+extern void ks8695_timer_init(void);
diff --git a/arch/arm/mach-ks8695/include/mach/uncompress.h b/arch/arm/mach-ks8695/include/mach/uncompress.h
index 8879d61..c089a1a 100644
--- a/arch/arm/mach-ks8695/include/mach/uncompress.h
+++ b/arch/arm/mach-ks8695/include/mach/uncompress.h
@@ -32,6 +32,5 @@
}
#define arch_decomp_setup()
-#define arch_decomp_wdog()
#endif
diff --git a/arch/arm/mach-ks8695/time.c b/arch/arm/mach-ks8695/time.c
index 46c84bc..c272a386 100644
--- a/arch/arm/mach-ks8695/time.c
+++ b/arch/arm/mach-ks8695/time.c
@@ -146,7 +146,7 @@
0xFFFFFFFFU);
}
-static void __init ks8695_timer_init (void)
+void __init ks8695_timer_init(void)
{
ks8695_timer_setup();
@@ -154,10 +154,6 @@
setup_irq(KS8695_IRQ_TIMER1, &ks8695_timer_irq);
}
-struct sys_timer ks8695_timer = {
- .init = ks8695_timer_init,
-};
-
void ks8695_restart(char mode, const char *cmd)
{
unsigned int reg;
diff --git a/arch/arm/mach-lpc32xx/common.h b/arch/arm/mach-lpc32xx/common.h
index afeac3b..e0b2606 100644
--- a/arch/arm/mach-lpc32xx/common.h
+++ b/arch/arm/mach-lpc32xx/common.h
@@ -25,7 +25,7 @@
/*
* Other arch specific structures and functions
*/
-extern struct sys_timer lpc32xx_timer;
+extern void lpc32xx_timer_init(void);
extern void __init lpc32xx_init_irq(void);
extern void __init lpc32xx_map_io(void);
extern void __init lpc32xx_serial_init(void);
diff --git a/arch/arm/mach-lpc32xx/include/mach/uncompress.h b/arch/arm/mach-lpc32xx/include/mach/uncompress.h
index c142487..1198a89 100644
--- a/arch/arm/mach-lpc32xx/include/mach/uncompress.h
+++ b/arch/arm/mach-lpc32xx/include/mach/uncompress.h
@@ -55,6 +55,5 @@
/* NULL functions; we don't presently need them */
#define arch_decomp_setup()
-#define arch_decomp_wdog()
#endif
diff --git a/arch/arm/mach-lpc32xx/phy3250.c b/arch/arm/mach-lpc32xx/phy3250.c
index e8ff4c3..c1cd5a9 100644
--- a/arch/arm/mach-lpc32xx/phy3250.c
+++ b/arch/arm/mach-lpc32xx/phy3250.c
@@ -263,7 +263,7 @@
.atag_offset = 0x100,
.map_io = lpc32xx_map_io,
.init_irq = lpc32xx_init_irq,
- .timer = &lpc32xx_timer,
+ .init_time = lpc32xx_timer_init,
.init_machine = lpc3250_machine_init,
.dt_compat = lpc32xx_dt_compat,
.restart = lpc23xx_restart,
diff --git a/arch/arm/mach-lpc32xx/timer.c b/arch/arm/mach-lpc32xx/timer.c
index c40667c..20eab63 100644
--- a/arch/arm/mach-lpc32xx/timer.c
+++ b/arch/arm/mach-lpc32xx/timer.c
@@ -70,7 +70,6 @@
static struct clock_event_device lpc32xx_clkevt = {
.name = "lpc32xx_clkevt",
.features = CLOCK_EVT_FEAT_ONESHOT,
- .shift = 32,
.rating = 300,
.set_next_event = lpc32xx_clkevt_next_event,
.set_mode = lpc32xx_clkevt_mode,
@@ -100,7 +99,7 @@
* clocks need to be enabled here manually and then tagged as used in
* the clock driver initialization
*/
-static void __init lpc32xx_timer_init(void)
+void __init lpc32xx_timer_init(void)
{
u32 clkrate, pllreg;
@@ -141,14 +140,8 @@
setup_irq(IRQ_LPC32XX_TIMER0, &lpc32xx_timer_irq);
/* Setup the clockevent structure. */
- lpc32xx_clkevt.mult = div_sc(clkrate, NSEC_PER_SEC,
- lpc32xx_clkevt.shift);
- lpc32xx_clkevt.max_delta_ns = clockevent_delta2ns(-1,
- &lpc32xx_clkevt);
- lpc32xx_clkevt.min_delta_ns = clockevent_delta2ns(1,
- &lpc32xx_clkevt) + 1;
lpc32xx_clkevt.cpumask = cpumask_of(0);
- clockevents_register_device(&lpc32xx_clkevt);
+ clockevents_config_and_register(&lpc32xx_clkevt, clkrate, 1, -1);
/* Use timer1 as clock source. */
__raw_writel(LPC32XX_TIMER_CNTR_TCR_RESET,
@@ -161,8 +154,3 @@
clocksource_mmio_init(LPC32XX_TIMER_TC(LPC32XX_TIMER1_BASE),
"lpc32xx_clksrc", clkrate, 300, 32, clocksource_mmio_readl_up);
}
-
-struct sys_timer lpc32xx_timer = {
- .init = &lpc32xx_timer_init,
-};
-
diff --git a/arch/arm/mach-mmp/aspenite.c b/arch/arm/mach-mmp/aspenite.c
index e5dba9c..9f64d56 100644
--- a/arch/arm/mach-mmp/aspenite.c
+++ b/arch/arm/mach-mmp/aspenite.c
@@ -262,7 +262,7 @@
.map_io = mmp_map_io,
.nr_irqs = MMP_NR_IRQS,
.init_irq = pxa168_init_irq,
- .timer = &pxa168_timer,
+ .init_time = pxa168_timer_init,
.init_machine = common_init,
.restart = pxa168_restart,
MACHINE_END
@@ -271,7 +271,7 @@
.map_io = mmp_map_io,
.nr_irqs = MMP_NR_IRQS,
.init_irq = pxa168_init_irq,
- .timer = &pxa168_timer,
+ .init_time = pxa168_timer_init,
.init_machine = common_init,
.restart = pxa168_restart,
MACHINE_END
diff --git a/arch/arm/mach-mmp/avengers_lite.c b/arch/arm/mach-mmp/avengers_lite.c
index 603542a..1f94957 100644
--- a/arch/arm/mach-mmp/avengers_lite.c
+++ b/arch/arm/mach-mmp/avengers_lite.c
@@ -45,7 +45,7 @@
.map_io = mmp_map_io,
.nr_irqs = MMP_NR_IRQS,
.init_irq = pxa168_init_irq,
- .timer = &pxa168_timer,
+ .init_time = pxa168_timer_init,
.init_machine = avengers_lite_init,
.restart = pxa168_restart,
MACHINE_END
diff --git a/arch/arm/mach-mmp/brownstone.c b/arch/arm/mach-mmp/brownstone.c
index 5cb769c..2358011 100644
--- a/arch/arm/mach-mmp/brownstone.c
+++ b/arch/arm/mach-mmp/brownstone.c
@@ -218,7 +218,7 @@
.map_io = mmp_map_io,
.nr_irqs = BROWNSTONE_NR_IRQS,
.init_irq = mmp2_init_irq,
- .timer = &mmp2_timer,
+ .init_time = mmp2_timer_init,
.init_machine = brownstone_init,
.restart = mmp_restart,
MACHINE_END
diff --git a/arch/arm/mach-mmp/common.h b/arch/arm/mach-mmp/common.h
index bd45327..0bdc50b 100644
--- a/arch/arm/mach-mmp/common.h
+++ b/arch/arm/mach-mmp/common.h
@@ -1,7 +1,5 @@
#define ARRAY_AND_SIZE(x) (x), ARRAY_SIZE(x)
-struct sys_timer;
-
extern void timer_init(int irq);
extern void __init icu_init_irq(void);
diff --git a/arch/arm/mach-mmp/flint.c b/arch/arm/mach-mmp/flint.c
index 8059cc0..754c352 100644
--- a/arch/arm/mach-mmp/flint.c
+++ b/arch/arm/mach-mmp/flint.c
@@ -121,7 +121,7 @@
.map_io = mmp_map_io,
.nr_irqs = FLINT_NR_IRQS,
.init_irq = mmp2_init_irq,
- .timer = &mmp2_timer,
+ .init_time = mmp2_timer_init,
.init_machine = flint_init,
.restart = mmp_restart,
MACHINE_END
diff --git a/arch/arm/mach-mmp/gplugd.c b/arch/arm/mach-mmp/gplugd.c
index 5c3d61e..d1e2d59 100644
--- a/arch/arm/mach-mmp/gplugd.c
+++ b/arch/arm/mach-mmp/gplugd.c
@@ -194,7 +194,7 @@
.map_io = mmp_map_io,
.nr_irqs = MMP_NR_IRQS,
.init_irq = pxa168_init_irq,
- .timer = &pxa168_timer,
+ .init_time = pxa168_timer_init,
.init_machine = gplugd_init,
.restart = pxa168_restart,
MACHINE_END
diff --git a/arch/arm/mach-mmp/include/mach/mmp2.h b/arch/arm/mach-mmp/include/mach/mmp2.h
index c4ca4d1..0764f4e 100644
--- a/arch/arm/mach-mmp/include/mach/mmp2.h
+++ b/arch/arm/mach-mmp/include/mach/mmp2.h
@@ -3,9 +3,7 @@
#include <linux/platform_data/pxa_sdhci.h>
-struct sys_timer;
-
-extern struct sys_timer mmp2_timer;
+extern void mmp2_timer_init(void);
extern void __init mmp2_init_icu(void);
extern void __init mmp2_init_irq(void);
extern void mmp2_clear_pmic_int(void);
diff --git a/arch/arm/mach-mmp/include/mach/pxa168.h b/arch/arm/mach-mmp/include/mach/pxa168.h
index 37632d9..7ed1df2 100644
--- a/arch/arm/mach-mmp/include/mach/pxa168.h
+++ b/arch/arm/mach-mmp/include/mach/pxa168.h
@@ -1,9 +1,7 @@
#ifndef __ASM_MACH_PXA168_H
#define __ASM_MACH_PXA168_H
-struct sys_timer;
-
-extern struct sys_timer pxa168_timer;
+extern void pxa168_timer_init(void);
extern void __init pxa168_init_irq(void);
extern void pxa168_restart(char, const char *);
extern void pxa168_clear_keypad_wakeup(void);
diff --git a/arch/arm/mach-mmp/include/mach/pxa910.h b/arch/arm/mach-mmp/include/mach/pxa910.h
index 3b58a3b..eff31ab 100644
--- a/arch/arm/mach-mmp/include/mach/pxa910.h
+++ b/arch/arm/mach-mmp/include/mach/pxa910.h
@@ -1,9 +1,7 @@
#ifndef __ASM_MACH_PXA910_H
#define __ASM_MACH_PXA910_H
-struct sys_timer;
-
-extern struct sys_timer pxa910_timer;
+extern void pxa910_timer_init(void);
extern void __init pxa910_init_irq(void);
#include <linux/i2c.h>
diff --git a/arch/arm/mach-mmp/include/mach/uncompress.h b/arch/arm/mach-mmp/include/mach/uncompress.h
index d6daeb7..8890fa8 100644
--- a/arch/arm/mach-mmp/include/mach/uncompress.h
+++ b/arch/arm/mach-mmp/include/mach/uncompress.h
@@ -43,9 +43,3 @@
if (machine_is_avengers_lite())
UART = (unsigned long *)UART3_BASE;
}
-
-/*
- * nothing to do
- */
-
-#define arch_decomp_wdog()
diff --git a/arch/arm/mach-mmp/jasper.c b/arch/arm/mach-mmp/jasper.c
index ff73249..66634fd 100644
--- a/arch/arm/mach-mmp/jasper.c
+++ b/arch/arm/mach-mmp/jasper.c
@@ -174,7 +174,7 @@
.map_io = mmp_map_io,
.nr_irqs = JASPER_NR_IRQS,
.init_irq = mmp2_init_irq,
- .timer = &mmp2_timer,
+ .init_time = mmp2_timer_init,
.init_machine = jasper_init,
.restart = mmp_restart,
MACHINE_END
diff --git a/arch/arm/mach-mmp/mmp-dt.c b/arch/arm/mach-mmp/mmp-dt.c
index 033cc31..d063efa 100644
--- a/arch/arm/mach-mmp/mmp-dt.c
+++ b/arch/arm/mach-mmp/mmp-dt.c
@@ -22,10 +22,6 @@
extern void __init mmp_dt_irq_init(void);
extern void __init mmp_dt_init_timer(void);
-static struct sys_timer mmp_dt_timer = {
- .init = mmp_dt_init_timer,
-};
-
static const struct of_dev_auxdata pxa168_auxdata_lookup[] __initconst = {
OF_DEV_AUXDATA("mrvl,mmp-uart", 0xd4017000, "pxa2xx-uart.0", NULL),
OF_DEV_AUXDATA("mrvl,mmp-uart", 0xd4018000, "pxa2xx-uart.1", NULL),
@@ -69,7 +65,7 @@
DT_MACHINE_START(PXA168_DT, "Marvell PXA168 (Device Tree Support)")
.map_io = mmp_map_io,
.init_irq = mmp_dt_irq_init,
- .timer = &mmp_dt_timer,
+ .init_time = mmp_dt_init_timer,
.init_machine = pxa168_dt_init,
.dt_compat = mmp_dt_board_compat,
MACHINE_END
@@ -77,7 +73,7 @@
DT_MACHINE_START(PXA910_DT, "Marvell PXA910 (Device Tree Support)")
.map_io = mmp_map_io,
.init_irq = mmp_dt_irq_init,
- .timer = &mmp_dt_timer,
+ .init_time = mmp_dt_init_timer,
.init_machine = pxa910_dt_init,
.dt_compat = mmp_dt_board_compat,
MACHINE_END
diff --git a/arch/arm/mach-mmp/mmp2-dt.c b/arch/arm/mach-mmp/mmp2-dt.c
index 535a5ed..fad431a 100644
--- a/arch/arm/mach-mmp/mmp2-dt.c
+++ b/arch/arm/mach-mmp/mmp2-dt.c
@@ -24,10 +24,6 @@
extern void __init mmp_dt_irq_init(void);
extern void __init mmp_dt_init_timer(void);
-static struct sys_timer mmp_dt_timer = {
- .init = mmp_dt_init_timer,
-};
-
static const struct of_dev_auxdata mmp2_auxdata_lookup[] __initconst = {
OF_DEV_AUXDATA("mrvl,mmp-uart", 0xd4030000, "pxa2xx-uart.0", NULL),
OF_DEV_AUXDATA("mrvl,mmp-uart", 0xd4017000, "pxa2xx-uart.1", NULL),
@@ -54,7 +50,7 @@
DT_MACHINE_START(MMP2_DT, "Marvell MMP2 (Device Tree Support)")
.map_io = mmp_map_io,
.init_irq = mmp_dt_irq_init,
- .timer = &mmp_dt_timer,
+ .init_time = mmp_dt_init_timer,
.init_machine = mmp2_dt_init,
.dt_compat = mmp2_dt_board_compat,
MACHINE_END
diff --git a/arch/arm/mach-mmp/mmp2.c b/arch/arm/mach-mmp/mmp2.c
index 3a3768c..d94d114 100644
--- a/arch/arm/mach-mmp/mmp2.c
+++ b/arch/arm/mach-mmp/mmp2.c
@@ -114,7 +114,7 @@
#define APBC_TIMERS APBC_REG(0x024)
-static void __init mmp2_timer_init(void)
+void __init mmp2_timer_init(void)
{
unsigned long clk_rst;
@@ -130,10 +130,6 @@
timer_init(IRQ_MMP2_TIMER1);
}
-struct sys_timer mmp2_timer = {
- .init = mmp2_timer_init,
-};
-
/* on-chip devices */
MMP2_DEVICE(uart1, "pxa2xx-uart", 0, UART1, 0xd4030000, 0x30, 4, 5);
MMP2_DEVICE(uart2, "pxa2xx-uart", 1, UART2, 0xd4017000, 0x30, 20, 21);
diff --git a/arch/arm/mach-mmp/pxa168.c b/arch/arm/mach-mmp/pxa168.c
index b7f074f..9bc7b86 100644
--- a/arch/arm/mach-mmp/pxa168.c
+++ b/arch/arm/mach-mmp/pxa168.c
@@ -67,7 +67,7 @@
#define TIMER_CLK_RST (APBC_APBCLK | APBC_FNCLK | APBC_FNCLKSEL(3))
#define APBC_TIMERS APBC_REG(0x34)
-static void __init pxa168_timer_init(void)
+void __init pxa168_timer_init(void)
{
/* this is early, we have to initialize the CCU registers by
* ourselves instead of using clk_* API. Clock rate is defined
@@ -81,10 +81,6 @@
timer_init(IRQ_PXA168_TIMER1);
}
-struct sys_timer pxa168_timer = {
- .init = pxa168_timer_init,
-};
-
void pxa168_clear_keypad_wakeup(void)
{
uint32_t val;
diff --git a/arch/arm/mach-mmp/pxa910.c b/arch/arm/mach-mmp/pxa910.c
index 8b1e16f..c6a89f1 100644
--- a/arch/arm/mach-mmp/pxa910.c
+++ b/arch/arm/mach-mmp/pxa910.c
@@ -101,7 +101,7 @@
#define TIMER_CLK_RST (APBC_APBCLK | APBC_FNCLK | APBC_FNCLKSEL(3))
#define APBC_TIMERS APBC_REG(0x34)
-static void __init pxa910_timer_init(void)
+void __init pxa910_timer_init(void)
{
/* reset and configure */
__raw_writel(APBC_APBCLK | APBC_RST, APBC_TIMERS);
@@ -110,10 +110,6 @@
timer_init(IRQ_PXA910_AP1_TIMER1);
}
-struct sys_timer pxa910_timer = {
- .init = pxa910_timer_init,
-};
-
/* on-chip devices */
/* NOTE: there are totally 3 UARTs on PXA910:
diff --git a/arch/arm/mach-mmp/tavorevb.c b/arch/arm/mach-mmp/tavorevb.c
index b28f908..4c127d2 100644
--- a/arch/arm/mach-mmp/tavorevb.c
+++ b/arch/arm/mach-mmp/tavorevb.c
@@ -103,7 +103,7 @@
.map_io = mmp_map_io,
.nr_irqs = MMP_NR_IRQS,
.init_irq = pxa910_init_irq,
- .timer = &pxa910_timer,
+ .init_time = pxa910_timer_init,
.init_machine = tavorevb_init,
.restart = mmp_restart,
MACHINE_END
diff --git a/arch/arm/mach-mmp/teton_bga.c b/arch/arm/mach-mmp/teton_bga.c
index dd30ea7..8609967 100644
--- a/arch/arm/mach-mmp/teton_bga.c
+++ b/arch/arm/mach-mmp/teton_bga.c
@@ -86,7 +86,7 @@
.map_io = mmp_map_io,
.nr_irqs = MMP_NR_IRQS,
.init_irq = pxa168_init_irq,
- .timer = &pxa168_timer,
+ .init_time = pxa168_timer_init,
.init_machine = teton_bga_init,
.restart = pxa168_restart,
MACHINE_END
diff --git a/arch/arm/mach-mmp/time.c b/arch/arm/mach-mmp/time.c
index 936447c..86a18b3 100644
--- a/arch/arm/mach-mmp/time.c
+++ b/arch/arm/mach-mmp/time.c
@@ -141,7 +141,6 @@
static struct clock_event_device ckevt = {
.name = "clockevent",
.features = CLOCK_EVT_FEAT_ONESHOT,
- .shift = 32,
.rating = 200,
.set_next_event = timer_set_next_event,
.set_mode = timer_set_mode,
@@ -198,15 +197,13 @@
setup_sched_clock(mmp_read_sched_clock, 32, CLOCK_TICK_RATE);
- ckevt.mult = div_sc(CLOCK_TICK_RATE, NSEC_PER_SEC, ckevt.shift);
- ckevt.max_delta_ns = clockevent_delta2ns(MAX_DELTA, &ckevt);
- ckevt.min_delta_ns = clockevent_delta2ns(MIN_DELTA, &ckevt);
ckevt.cpumask = cpumask_of(0);
setup_irq(irq, &timer_irq);
clocksource_register_hz(&cksrc, CLOCK_TICK_RATE);
- clockevents_register_device(&ckevt);
+ clockevents_config_and_register(&ckevt, CLOCK_TICK_RATE,
+ MIN_DELTA, MAX_DELTA);
}
#ifdef CONFIG_OF
diff --git a/arch/arm/mach-mmp/ttc_dkb.c b/arch/arm/mach-mmp/ttc_dkb.c
index ce55fd8..6e47490 100644
--- a/arch/arm/mach-mmp/ttc_dkb.c
+++ b/arch/arm/mach-mmp/ttc_dkb.c
@@ -218,7 +218,7 @@
.map_io = mmp_map_io,
.nr_irqs = TTCDKB_NR_IRQS,
.init_irq = pxa910_init_irq,
- .timer = &pxa910_timer,
+ .init_time = pxa910_timer_init,
.init_machine = ttc_dkb_init,
.restart = mmp_restart,
MACHINE_END
diff --git a/arch/arm/mach-msm/board-dt-8660.c b/arch/arm/mach-msm/board-dt-8660.c
index b5b4de2..7dcfc53 100644
--- a/arch/arm/mach-msm/board-dt-8660.c
+++ b/arch/arm/mach-msm/board-dt-8660.c
@@ -11,26 +11,15 @@
*/
#include <linux/init.h>
+#include <linux/irqchip.h>
#include <linux/of.h>
-#include <linux/of_irq.h>
#include <linux/of_platform.h>
#include <asm/mach/arch.h>
-#include <asm/hardware/gic.h>
#include <mach/board.h>
#include "common.h"
-static const struct of_device_id msm_dt_gic_match[] __initconst = {
- { .compatible = "qcom,msm-8660-qgic", .data = gic_of_init },
- {}
-};
-
-static void __init msm8x60_init_irq(void)
-{
- of_irq_init(msm_dt_gic_match);
-}
-
static void __init msm8x60_init_late(void)
{
smd_debugfs_init();
@@ -55,10 +44,9 @@
DT_MACHINE_START(MSM_DT, "Qualcomm MSM (Flattened Device Tree)")
.smp = smp_ops(msm_smp_ops),
.map_io = msm_map_msm8x60_io,
- .init_irq = msm8x60_init_irq,
- .handle_irq = gic_handle_irq,
+ .init_irq = irqchip_init,
.init_machine = msm8x60_dt_init,
.init_late = msm8x60_init_late,
- .timer = &msm_dt_timer,
+ .init_time = msm_dt_timer_init,
.dt_compat = msm8x60_fluid_match,
MACHINE_END
diff --git a/arch/arm/mach-msm/board-dt-8960.c b/arch/arm/mach-msm/board-dt-8960.c
index 4490edb..7301936 100644
--- a/arch/arm/mach-msm/board-dt-8960.c
+++ b/arch/arm/mach-msm/board-dt-8960.c
@@ -11,24 +11,13 @@
*/
#include <linux/init.h>
-#include <linux/of_irq.h>
+#include <linux/irqchip.h>
#include <linux/of_platform.h>
-#include <asm/hardware/gic.h>
#include <asm/mach/arch.h>
#include "common.h"
-static const struct of_device_id msm_dt_gic_match[] __initconst = {
- { .compatible = "qcom,msm-qgic2", .data = gic_of_init },
- { }
-};
-
-static void __init msm_dt_init_irq(void)
-{
- of_irq_init(msm_dt_gic_match);
-}
-
static void __init msm_dt_init(void)
{
of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
@@ -42,9 +31,8 @@
DT_MACHINE_START(MSM8960_DT, "Qualcomm MSM (Flattened Device Tree)")
.smp = smp_ops(msm_smp_ops),
.map_io = msm_map_msm8960_io,
- .init_irq = msm_dt_init_irq,
- .timer = &msm_dt_timer,
+ .init_irq = irqchip_init,
+ .init_time = msm_dt_timer_init,
.init_machine = msm_dt_init,
.dt_compat = msm8960_dt_match,
- .handle_irq = gic_handle_irq,
MACHINE_END
diff --git a/arch/arm/mach-msm/board-halibut.c b/arch/arm/mach-msm/board-halibut.c
index 6ce542e..84d720a 100644
--- a/arch/arm/mach-msm/board-halibut.c
+++ b/arch/arm/mach-msm/board-halibut.c
@@ -106,5 +106,5 @@
.init_irq = halibut_init_irq,
.init_machine = halibut_init,
.init_late = halibut_init_late,
- .timer = &msm7x01_timer,
+ .init_time = msm7x01_timer_init,
MACHINE_END
diff --git a/arch/arm/mach-msm/board-mahimahi.c b/arch/arm/mach-msm/board-mahimahi.c
index df00bc0..30c3496 100644
--- a/arch/arm/mach-msm/board-mahimahi.c
+++ b/arch/arm/mach-msm/board-mahimahi.c
@@ -75,7 +75,7 @@
smd_debugfs_init();
}
-extern struct sys_timer msm_timer;
+void msm_timer_init(void);
MACHINE_START(MAHIMAHI, "mahimahi")
.atag_offset = 0x100,
@@ -84,5 +84,5 @@
.init_irq = msm_init_irq,
.init_machine = mahimahi_init,
.init_late = mahimahi_init_late,
- .timer = &msm_timer,
+ .init_time = msm_timer_init,
MACHINE_END
diff --git a/arch/arm/mach-msm/board-msm7x30.c b/arch/arm/mach-msm/board-msm7x30.c
index effa6f4..7bc3f82 100644
--- a/arch/arm/mach-msm/board-msm7x30.c
+++ b/arch/arm/mach-msm/board-msm7x30.c
@@ -131,7 +131,7 @@
.init_irq = msm7x30_init_irq,
.init_machine = msm7x30_init,
.init_late = msm7x30_init_late,
- .timer = &msm7x30_timer,
+ .init_time = msm7x30_timer_init,
MACHINE_END
MACHINE_START(MSM7X30_FFA, "QCT MSM7X30 FFA")
@@ -142,7 +142,7 @@
.init_irq = msm7x30_init_irq,
.init_machine = msm7x30_init,
.init_late = msm7x30_init_late,
- .timer = &msm7x30_timer,
+ .init_time = msm7x30_timer_init,
MACHINE_END
MACHINE_START(MSM7X30_FLUID, "QCT MSM7X30 FLUID")
@@ -153,5 +153,5 @@
.init_irq = msm7x30_init_irq,
.init_machine = msm7x30_init,
.init_late = msm7x30_init_late,
- .timer = &msm7x30_timer,
+ .init_time = msm7x30_timer_init,
MACHINE_END
diff --git a/arch/arm/mach-msm/board-qsd8x50.c b/arch/arm/mach-msm/board-qsd8x50.c
index 2448fcf..686e794 100644
--- a/arch/arm/mach-msm/board-qsd8x50.c
+++ b/arch/arm/mach-msm/board-qsd8x50.c
@@ -200,7 +200,7 @@
.init_irq = qsd8x50_init_irq,
.init_machine = qsd8x50_init,
.init_late = qsd8x50_init_late,
- .timer = &qsd8x50_timer,
+ .init_time = qsd8x50_timer_init,
MACHINE_END
MACHINE_START(QSD8X50A_ST1_5, "QCT QSD8X50A ST1.5")
@@ -209,5 +209,5 @@
.init_irq = qsd8x50_init_irq,
.init_machine = qsd8x50_init,
.init_late = qsd8x50_init_late,
- .timer = &qsd8x50_timer,
+ .init_time = qsd8x50_timer_init,
MACHINE_END
diff --git a/arch/arm/mach-msm/board-sapphire.c b/arch/arm/mach-msm/board-sapphire.c
index b7b0fc7..7073011 100644
--- a/arch/arm/mach-msm/board-sapphire.c
+++ b/arch/arm/mach-msm/board-sapphire.c
@@ -53,7 +53,7 @@
&msm_device_uart3,
};
-extern struct sys_timer msm_timer;
+void msm_timer_init(void);
static void __init sapphire_init_irq(void)
{
@@ -113,5 +113,5 @@
.init_irq = sapphire_init_irq,
.init_machine = sapphire_init,
.init_late = sapphire_init_late,
- .timer = &msm_timer,
+ .init_time = msm_timer_init,
MACHINE_END
diff --git a/arch/arm/mach-msm/board-trout.c b/arch/arm/mach-msm/board-trout.c
index 4ba0800..919bfa3 100644
--- a/arch/arm/mach-msm/board-trout.c
+++ b/arch/arm/mach-msm/board-trout.c
@@ -110,5 +110,5 @@
.init_irq = trout_init_irq,
.init_machine = trout_init,
.init_late = trout_init_late,
- .timer = &msm7x01_timer,
+ .init_time = msm7x01_timer_init,
MACHINE_END
diff --git a/arch/arm/mach-msm/common.h b/arch/arm/mach-msm/common.h
index 633a7159..ce8215a 100644
--- a/arch/arm/mach-msm/common.h
+++ b/arch/arm/mach-msm/common.h
@@ -12,10 +12,10 @@
#ifndef __MACH_COMMON_H
#define __MACH_COMMON_H
-extern struct sys_timer msm7x01_timer;
-extern struct sys_timer msm7x30_timer;
-extern struct sys_timer msm_dt_timer;
-extern struct sys_timer qsd8x50_timer;
+extern void msm7x01_timer_init(void);
+extern void msm7x30_timer_init(void);
+extern void msm_dt_timer_init(void);
+extern void qsd8x50_timer_init(void);
extern void msm_map_common_io(void);
extern void msm_map_msm7x30_io(void);
diff --git a/arch/arm/mach-msm/include/mach/uncompress.h b/arch/arm/mach-msm/include/mach/uncompress.h
index c14011f..fa97a10 100644
--- a/arch/arm/mach-msm/include/mach/uncompress.h
+++ b/arch/arm/mach-msm/include/mach/uncompress.h
@@ -60,8 +60,4 @@
{
}
-static inline void arch_decomp_wdog(void)
-{
-}
-
#endif
diff --git a/arch/arm/mach-msm/platsmp.c b/arch/arm/mach-msm/platsmp.c
index 7ed69b69..42932865 100644
--- a/arch/arm/mach-msm/platsmp.c
+++ b/arch/arm/mach-msm/platsmp.c
@@ -15,8 +15,8 @@
#include <linux/jiffies.h>
#include <linux/smp.h>
#include <linux/io.h>
+#include <linux/irqchip/arm-gic.h>
-#include <asm/hardware/gic.h>
#include <asm/cacheflush.h>
#include <asm/cputype.h>
#include <asm/mach-types.h>
@@ -115,7 +115,7 @@
* the boot monitor to read the system wide flags register,
* and branch to the address found there.
*/
- gic_raise_softirq(cpumask_of(cpu), 0);
+ arch_send_wakeup_ipi_mask(cpumask_of(cpu));
timeout = jiffies + (1 * HZ);
while (time_before(jiffies, timeout)) {
@@ -153,8 +153,6 @@
for (i = 0; i < ncores; i++)
set_cpu_possible(i, true);
-
- set_smp_cross_call(gic_raise_softirq);
}
static void __init msm_smp_prepare_cpus(unsigned int max_cpus)
diff --git a/arch/arm/mach-msm/timer.c b/arch/arm/mach-msm/timer.c
index 476549a..2969027 100644
--- a/arch/arm/mach-msm/timer.c
+++ b/arch/arm/mach-msm/timer.c
@@ -25,7 +25,6 @@
#include <linux/of_irq.h>
#include <asm/mach/time.h>
-#include <asm/hardware/gic.h>
#include <asm/localtimer.h>
#include <asm/sched_clock.h>
@@ -144,13 +143,9 @@
evt->rating = msm_clockevent.rating;
evt->set_mode = msm_timer_set_mode;
evt->set_next_event = msm_timer_set_next_event;
- evt->shift = msm_clockevent.shift;
- evt->mult = div_sc(GPT_HZ, NSEC_PER_SEC, evt->shift);
- evt->max_delta_ns = clockevent_delta2ns(0xf0000000, evt);
- evt->min_delta_ns = clockevent_delta2ns(4, evt);
*__this_cpu_ptr(msm_evt.percpu_evt) = evt;
- clockevents_register_device(evt);
+ clockevents_config_and_register(evt, GPT_HZ, 4, 0xf0000000);
enable_percpu_irq(evt->irq, IRQ_TYPE_EDGE_RISING);
return 0;
}
@@ -229,7 +224,7 @@
{ },
};
-static void __init msm_dt_timer_init(void)
+void __init msm_dt_timer_init(void)
{
struct device_node *np;
u32 freq;
@@ -296,10 +291,6 @@
msm_timer_init(freq, 32, irq, !!percpu_offset);
}
-
-struct sys_timer msm_dt_timer = {
- .init = msm_dt_timer_init
-};
#endif
static int __init msm_timer_map(phys_addr_t event, phys_addr_t source)
@@ -317,7 +308,7 @@
return 0;
}
-static void __init msm7x01_timer_init(void)
+void __init msm7x01_timer_init(void)
{
struct clocksource *cs = &msm_clocksource;
@@ -330,28 +321,16 @@
false);
}
-struct sys_timer msm7x01_timer = {
- .init = msm7x01_timer_init
-};
-
-static void __init msm7x30_timer_init(void)
+void __init msm7x30_timer_init(void)
{
if (msm_timer_map(0xc0100004, 0xc0100024))
return;
msm_timer_init(24576000 / 4, 32, 1, false);
}
-struct sys_timer msm7x30_timer = {
- .init = msm7x30_timer_init
-};
-
-static void __init qsd8x50_timer_init(void)
+void __init qsd8x50_timer_init(void)
{
if (msm_timer_map(0xAC100000, 0xAC100010))
return;
msm_timer_init(19200000 / 4, 32, 7, false);
}
-
-struct sys_timer qsd8x50_timer = {
- .init = qsd8x50_timer_init
-};
diff --git a/arch/arm/mach-mv78xx0/buffalo-wxl-setup.c b/arch/arm/mach-mv78xx0/buffalo-wxl-setup.c
index ee74ec9..1f2ef98 100644
--- a/arch/arm/mach-mv78xx0/buffalo-wxl-setup.c
+++ b/arch/arm/mach-mv78xx0/buffalo-wxl-setup.c
@@ -150,6 +150,6 @@
.map_io = mv78xx0_map_io,
.init_early = mv78xx0_init_early,
.init_irq = mv78xx0_init_irq,
- .timer = &mv78xx0_timer,
+ .init_time = mv78xx0_timer_init,
.restart = mv78xx0_restart,
MACHINE_END
diff --git a/arch/arm/mach-mv78xx0/common.c b/arch/arm/mach-mv78xx0/common.c
index d0cb485..0efa1449 100644
--- a/arch/arm/mach-mv78xx0/common.c
+++ b/arch/arm/mach-mv78xx0/common.c
@@ -336,16 +336,12 @@
orion_time_set_base(TIMER_VIRT_BASE);
}
-static void __init_refok mv78xx0_timer_init(void)
+void __init_refok mv78xx0_timer_init(void)
{
orion_time_init(BRIDGE_VIRT_BASE, BRIDGE_INT_TIMER1_CLR,
IRQ_MV78XX0_TIMER_1, get_tclk());
}
-struct sys_timer mv78xx0_timer = {
- .init = mv78xx0_timer_init,
-};
-
/*****************************************************************************
* General
diff --git a/arch/arm/mach-mv78xx0/common.h b/arch/arm/mach-mv78xx0/common.h
index 507c767..5e9485b 100644
--- a/arch/arm/mach-mv78xx0/common.h
+++ b/arch/arm/mach-mv78xx0/common.h
@@ -47,7 +47,7 @@
void mv78xx0_i2c_init(void);
void mv78xx0_restart(char, const char *);
-extern struct sys_timer mv78xx0_timer;
+extern void mv78xx0_timer_init(void);
#endif
diff --git a/arch/arm/mach-mv78xx0/db78x00-bp-setup.c b/arch/arm/mach-mv78xx0/db78x00-bp-setup.c
index 4d6d48b..4e0f22b 100644
--- a/arch/arm/mach-mv78xx0/db78x00-bp-setup.c
+++ b/arch/arm/mach-mv78xx0/db78x00-bp-setup.c
@@ -98,6 +98,6 @@
.map_io = mv78xx0_map_io,
.init_early = mv78xx0_init_early,
.init_irq = mv78xx0_init_irq,
- .timer = &mv78xx0_timer,
+ .init_time = mv78xx0_timer_init,
.restart = mv78xx0_restart,
MACHINE_END
diff --git a/arch/arm/mach-mv78xx0/include/mach/uncompress.h b/arch/arm/mach-mv78xx0/include/mach/uncompress.h
index 3652642..6a761c4 100644
--- a/arch/arm/mach-mv78xx0/include/mach/uncompress.h
+++ b/arch/arm/mach-mv78xx0/include/mach/uncompress.h
@@ -44,4 +44,3 @@
* nothing to do
*/
#define arch_decomp_setup()
-#define arch_decomp_wdog()
diff --git a/arch/arm/mach-mv78xx0/rd78x00-masa-setup.c b/arch/arm/mach-mv78xx0/rd78x00-masa-setup.c
index 9a88270..d2d06f3 100644
--- a/arch/arm/mach-mv78xx0/rd78x00-masa-setup.c
+++ b/arch/arm/mach-mv78xx0/rd78x00-masa-setup.c
@@ -83,6 +83,6 @@
.map_io = mv78xx0_map_io,
.init_early = mv78xx0_init_early,
.init_irq = mv78xx0_init_irq,
- .timer = &mv78xx0_timer,
+ .init_time = mv78xx0_timer_init,
.restart = mv78xx0_restart,
MACHINE_END
diff --git a/arch/arm/mach-mvebu/armada-370-xp.c b/arch/arm/mach-mvebu/armada-370-xp.c
index 7434b5e..a5ea616d 100644
--- a/arch/arm/mach-mvebu/armada-370-xp.c
+++ b/arch/arm/mach-mvebu/armada-370-xp.c
@@ -56,10 +56,6 @@
init_dma_coherent_pool_size(SZ_1M);
}
-struct sys_timer armada_370_xp_timer = {
- .init = armada_370_xp_timer_and_clk_init,
-};
-
static void __init armada_370_xp_dt_init(void)
{
of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
@@ -78,7 +74,7 @@
.init_early = armada_370_xp_init_early,
.init_irq = armada_370_xp_init_irq,
.handle_irq = armada_370_xp_handle_irq,
- .timer = &armada_370_xp_timer,
+ .init_time = armada_370_xp_timer_and_clk_init,
.restart = mvebu_restart,
.dt_compat = armada_370_xp_dt_compat,
MACHINE_END
diff --git a/arch/arm/mach-mxs/include/mach/uncompress.h b/arch/arm/mach-mxs/include/mach/uncompress.h
index ef28114..533f518 100644
--- a/arch/arm/mach-mxs/include/mach/uncompress.h
+++ b/arch/arm/mach-mxs/include/mach/uncompress.h
@@ -72,6 +72,5 @@
}
#define arch_decomp_setup() __arch_decomp_setup(arch_id)
-#define arch_decomp_wdog()
#endif /* __MACH_MXS_UNCOMPRESS_H__ */
diff --git a/arch/arm/mach-mxs/mach-mxs.c b/arch/arm/mach-mxs/mach-mxs.c
index c66129b..5fad7ce 100644
--- a/arch/arm/mach-mxs/mach-mxs.c
+++ b/arch/arm/mach-mxs/mach-mxs.c
@@ -163,19 +163,11 @@
mx23_clocks_init();
}
-static struct sys_timer imx23_timer = {
- .init = imx23_timer_init,
-};
-
static void __init imx28_timer_init(void)
{
mx28_clocks_init();
}
-static struct sys_timer imx28_timer = {
- .init = imx28_timer_init,
-};
-
enum mac_oui {
OUI_FSL,
OUI_DENX,
@@ -446,7 +438,7 @@
.map_io = mx23_map_io,
.init_irq = icoll_init_irq,
.handle_irq = icoll_handle_irq,
- .timer = &imx23_timer,
+ .init_time = imx23_timer_init,
.init_machine = mxs_machine_init,
.dt_compat = imx23_dt_compat,
.restart = mxs_restart,
@@ -456,7 +448,7 @@
.map_io = mx28_map_io,
.init_irq = icoll_init_irq,
.handle_irq = icoll_handle_irq,
- .timer = &imx28_timer,
+ .init_time = imx28_timer_init,
.init_machine = mxs_machine_init,
.dt_compat = imx28_dt_compat,
.restart = mxs_restart,
diff --git a/arch/arm/mach-mxs/timer.c b/arch/arm/mach-mxs/timer.c
index 856f4c7..27451b1 100644
--- a/arch/arm/mach-mxs/timer.c
+++ b/arch/arm/mach-mxs/timer.c
@@ -195,7 +195,6 @@
static struct clock_event_device mxs_clockevent_device = {
.name = "mxs_timrot",
.features = CLOCK_EVT_FEAT_ONESHOT,
- .shift = 32,
.set_mode = mxs_set_mode,
.set_next_event = timrotv2_set_next_event,
.rating = 200,
@@ -203,25 +202,12 @@
static int __init mxs_clockevent_init(struct clk *timer_clk)
{
- unsigned int c = clk_get_rate(timer_clk);
-
- mxs_clockevent_device.mult =
- div_sc(c, NSEC_PER_SEC, mxs_clockevent_device.shift);
- mxs_clockevent_device.cpumask = cpumask_of(0);
- if (timrot_is_v1()) {
+ if (timrot_is_v1())
mxs_clockevent_device.set_next_event = timrotv1_set_next_event;
- mxs_clockevent_device.max_delta_ns =
- clockevent_delta2ns(0xfffe, &mxs_clockevent_device);
- mxs_clockevent_device.min_delta_ns =
- clockevent_delta2ns(0xf, &mxs_clockevent_device);
- } else {
- mxs_clockevent_device.max_delta_ns =
- clockevent_delta2ns(0xfffffffe, &mxs_clockevent_device);
- mxs_clockevent_device.min_delta_ns =
- clockevent_delta2ns(0xf, &mxs_clockevent_device);
- }
-
- clockevents_register_device(&mxs_clockevent_device);
+ mxs_clockevent_device.cpumask = cpumask_of(0);
+ clockevents_config_and_register(&mxs_clockevent_device,
+ clk_get_rate(timer_clk), 0xf,
+ timrot_is_v1() ? 0xfffe : 0xfffffffe);
return 0;
}
diff --git a/arch/arm/mach-netx/generic.c b/arch/arm/mach-netx/generic.c
index aa62746..27c2cb7 100644
--- a/arch/arm/mach-netx/generic.c
+++ b/arch/arm/mach-netx/generic.c
@@ -23,9 +23,9 @@
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/io.h>
+#include <linux/irqchip/arm-vic.h>
#include <mach/hardware.h>
#include <asm/mach/map.h>
-#include <asm/hardware/vic.h>
#include <mach/netx-regs.h>
#include <asm/mach/irq.h>
diff --git a/arch/arm/mach-netx/generic.h b/arch/arm/mach-netx/generic.h
index 9b91511..768b26b 100644
--- a/arch/arm/mach-netx/generic.h
+++ b/arch/arm/mach-netx/generic.h
@@ -21,5 +21,4 @@
extern void __init netx_init_irq(void);
extern void netx_restart(char, const char *);
-struct sys_timer;
-extern struct sys_timer netx_timer;
+extern void netx_timer_init(void);
diff --git a/arch/arm/mach-netx/include/mach/uncompress.h b/arch/arm/mach-netx/include/mach/uncompress.h
index 84f9128..5cb1051b 100644
--- a/arch/arm/mach-netx/include/mach/uncompress.h
+++ b/arch/arm/mach-netx/include/mach/uncompress.h
@@ -73,4 +73,3 @@
* nothing to do
*/
#define arch_decomp_setup()
-#define arch_decomp_wdog()
diff --git a/arch/arm/mach-netx/nxdb500.c b/arch/arm/mach-netx/nxdb500.c
index 8b781ff..9b558eb 100644
--- a/arch/arm/mach-netx/nxdb500.c
+++ b/arch/arm/mach-netx/nxdb500.c
@@ -28,7 +28,6 @@
#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
-#include <asm/hardware/vic.h>
#include <mach/netx-regs.h>
#include <linux/platform_data/eth-netx.h>
@@ -204,8 +203,7 @@
.atag_offset = 0x100,
.map_io = netx_map_io,
.init_irq = netx_init_irq,
- .handle_irq = vic_handle_irq,
- .timer = &netx_timer,
+ .init_time = netx_timer_init,
.init_machine = nxdb500_init,
.restart = netx_restart,
MACHINE_END
diff --git a/arch/arm/mach-netx/nxdkn.c b/arch/arm/mach-netx/nxdkn.c
index b26dbce..a5e86cd 100644
--- a/arch/arm/mach-netx/nxdkn.c
+++ b/arch/arm/mach-netx/nxdkn.c
@@ -28,7 +28,6 @@
#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
-#include <asm/hardware/vic.h>
#include <mach/netx-regs.h>
#include <linux/platform_data/eth-netx.h>
@@ -97,8 +96,7 @@
.atag_offset = 0x100,
.map_io = netx_map_io,
.init_irq = netx_init_irq,
- .handle_irq = vic_handle_irq,
- .timer = &netx_timer,
+ .init_time = netx_timer_init,
.init_machine = nxdkn_init,
.restart = netx_restart,
MACHINE_END
diff --git a/arch/arm/mach-netx/nxeb500hmi.c b/arch/arm/mach-netx/nxeb500hmi.c
index 257382e..ad17885 100644
--- a/arch/arm/mach-netx/nxeb500hmi.c
+++ b/arch/arm/mach-netx/nxeb500hmi.c
@@ -28,7 +28,6 @@
#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
-#include <asm/hardware/vic.h>
#include <mach/netx-regs.h>
#include <linux/platform_data/eth-netx.h>
@@ -181,8 +180,7 @@
.atag_offset = 0x100,
.map_io = netx_map_io,
.init_irq = netx_init_irq,
- .handle_irq = vic_handle_irq,
- .timer = &netx_timer,
+ .init_time = netx_timer_init,
.init_machine = nxeb500hmi_init,
.restart = netx_restart,
MACHINE_END
diff --git a/arch/arm/mach-netx/time.c b/arch/arm/mach-netx/time.c
index e24c141..6df42e6 100644
--- a/arch/arm/mach-netx/time.c
+++ b/arch/arm/mach-netx/time.c
@@ -76,7 +76,6 @@
static struct clock_event_device netx_clockevent = {
.name = "netx-timer" __stringify(TIMER_CLOCKEVENT),
- .shift = 32,
.features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
.set_next_event = netx_set_next_event,
.set_mode = netx_set_mode,
@@ -107,7 +106,7 @@
/*
* Set up timer interrupt
*/
-static void __init netx_timer_init(void)
+void __init netx_timer_init(void)
{
/* disable timer initially */
writel(0, NETX_GPIO_COUNTER_CTRL(0));
@@ -140,18 +139,9 @@
clocksource_mmio_init(NETX_GPIO_COUNTER_CURRENT(TIMER_CLOCKSOURCE),
"netx_timer", CLOCK_TICK_RATE, 200, 32, clocksource_mmio_readl_up);
- netx_clockevent.mult = div_sc(CLOCK_TICK_RATE, NSEC_PER_SEC,
- netx_clockevent.shift);
- netx_clockevent.max_delta_ns =
- clockevent_delta2ns(0xfffffffe, &netx_clockevent);
/* with max_delta_ns >= delta2ns(0x800) the system currently runs fine.
* Adding some safety ... */
- netx_clockevent.min_delta_ns =
- clockevent_delta2ns(0xa00, &netx_clockevent);
netx_clockevent.cpumask = cpumask_of(0);
- clockevents_register_device(&netx_clockevent);
+ clockevents_config_and_register(&netx_clockevent, CLOCK_TICK_RATE,
+ 0xa00, 0xfffffffe);
}
-
-struct sys_timer netx_timer = {
- .init = netx_timer_init,
-};
diff --git a/arch/arm/mach-nomadik/board-nhk8815.c b/arch/arm/mach-nomadik/board-nhk8815.c
index 9f19069..aaed48d 100644
--- a/arch/arm/mach-nomadik/board-nhk8815.c
+++ b/arch/arm/mach-nomadik/board-nhk8815.c
@@ -27,7 +27,6 @@
#include <linux/pinctrl/machine.h>
#include <linux/platform_data/pinctrl-nomadik.h>
#include <linux/platform_data/clocksource-nomadik-mtu.h>
-#include <asm/hardware/vic.h>
#include <asm/sizes.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
@@ -267,10 +266,6 @@
nmdk_timer_init(io_p2v(NOMADIK_MTU0_BASE), IRQ_MTU0);
}
-static struct sys_timer nomadik_timer = {
- .init = nomadik_timer_init,
-};
-
static struct i2c_board_info __initdata nhk8815_i2c0_devices[] = {
{
I2C_BOARD_INFO("stw4811", 0x2d),
@@ -352,8 +347,7 @@
.atag_offset = 0x100,
.map_io = cpu8815_map_io,
.init_irq = cpu8815_init_irq,
- .handle_irq = vic_handle_irq,
- .timer = &nomadik_timer,
+ .init_time = nomadik_timer_init,
.init_machine = nhk8815_platform_init,
.restart = cpu8815_restart,
MACHINE_END
diff --git a/arch/arm/mach-nomadik/cpu-8815.c b/arch/arm/mach-nomadik/cpu-8815.c
index 1273931..35140467 100644
--- a/arch/arm/mach-nomadik/cpu-8815.c
+++ b/arch/arm/mach-nomadik/cpu-8815.c
@@ -25,13 +25,13 @@
#include <linux/slab.h>
#include <linux/irq.h>
#include <linux/dma-mapping.h>
+#include <linux/irqchip/arm-vic.h>
#include <linux/platform_data/clk-nomadik.h>
#include <linux/platform_data/pinctrl-nomadik.h>
#include <mach/hardware.h>
#include <mach/irqs.h>
#include <asm/mach/map.h>
-#include <asm/hardware/vic.h>
#include <asm/cacheflush.h>
#include <asm/hardware/cache-l2x0.h>
diff --git a/arch/arm/mach-nomadik/include/mach/uncompress.h b/arch/arm/mach-nomadik/include/mach/uncompress.h
index 7d4687e..f527af6 100644
--- a/arch/arm/mach-nomadik/include/mach/uncompress.h
+++ b/arch/arm/mach-nomadik/include/mach/uncompress.h
@@ -58,6 +58,4 @@
{
}
-#define arch_decomp_wdog() /* nothing to do here */
-
#endif /* __ASM_ARCH_UNCOMPRESS_H */
diff --git a/arch/arm/mach-omap1/board-ams-delta.c b/arch/arm/mach-omap1/board-ams-delta.c
index 2e98a3a..2aab761 100644
--- a/arch/arm/mach-omap1/board-ams-delta.c
+++ b/arch/arm/mach-omap1/board-ams-delta.c
@@ -628,6 +628,6 @@
.init_irq = omap1_init_irq,
.init_machine = ams_delta_init,
.init_late = ams_delta_init_late,
- .timer = &omap1_timer,
+ .init_time = omap1_timer_init,
.restart = omap1_restart,
MACHINE_END
diff --git a/arch/arm/mach-omap1/board-fsample.c b/arch/arm/mach-omap1/board-fsample.c
index 560a7dc..702d580 100644
--- a/arch/arm/mach-omap1/board-fsample.c
+++ b/arch/arm/mach-omap1/board-fsample.c
@@ -364,6 +364,6 @@
.init_irq = omap1_init_irq,
.init_machine = omap_fsample_init,
.init_late = omap1_init_late,
- .timer = &omap1_timer,
+ .init_time = omap1_timer_init,
.restart = omap1_restart,
MACHINE_END
diff --git a/arch/arm/mach-omap1/board-generic.c b/arch/arm/mach-omap1/board-generic.c
index 608e7d2..e1d9171 100644
--- a/arch/arm/mach-omap1/board-generic.c
+++ b/arch/arm/mach-omap1/board-generic.c
@@ -84,6 +84,6 @@
.init_irq = omap1_init_irq,
.init_machine = omap_generic_init,
.init_late = omap1_init_late,
- .timer = &omap1_timer,
+ .init_time = omap1_timer_init,
.restart = omap1_restart,
MACHINE_END
diff --git a/arch/arm/mach-omap1/board-h2.c b/arch/arm/mach-omap1/board-h2.c
index 2274bd6..0dac3d2 100644
--- a/arch/arm/mach-omap1/board-h2.c
+++ b/arch/arm/mach-omap1/board-h2.c
@@ -461,6 +461,6 @@
.init_irq = omap1_init_irq,
.init_machine = h2_init,
.init_late = omap1_init_late,
- .timer = &omap1_timer,
+ .init_time = omap1_timer_init,
.restart = omap1_restart,
MACHINE_END
diff --git a/arch/arm/mach-omap1/board-h3.c b/arch/arm/mach-omap1/board-h3.c
index 1051935..816ecd1 100644
--- a/arch/arm/mach-omap1/board-h3.c
+++ b/arch/arm/mach-omap1/board-h3.c
@@ -454,6 +454,6 @@
.init_irq = omap1_init_irq,
.init_machine = h3_init,
.init_late = omap1_init_late,
- .timer = &omap1_timer,
+ .init_time = omap1_timer_init,
.restart = omap1_restart,
MACHINE_END
diff --git a/arch/arm/mach-omap1/board-htcherald.c b/arch/arm/mach-omap1/board-htcherald.c
index 356f816..35a2379 100644
--- a/arch/arm/mach-omap1/board-htcherald.c
+++ b/arch/arm/mach-omap1/board-htcherald.c
@@ -603,6 +603,6 @@
.init_irq = omap1_init_irq,
.init_machine = htcherald_init,
.init_late = omap1_init_late,
- .timer = &omap1_timer,
+ .init_time = omap1_timer_init,
.restart = omap1_restart,
MACHINE_END
diff --git a/arch/arm/mach-omap1/board-innovator.c b/arch/arm/mach-omap1/board-innovator.c
index f8033fa..bd5f02e 100644
--- a/arch/arm/mach-omap1/board-innovator.c
+++ b/arch/arm/mach-omap1/board-innovator.c
@@ -458,6 +458,6 @@
.init_irq = omap1_init_irq,
.init_machine = innovator_init,
.init_late = omap1_init_late,
- .timer = &omap1_timer,
+ .init_time = omap1_timer_init,
.restart = omap1_restart,
MACHINE_END
diff --git a/arch/arm/mach-omap1/board-nokia770.c b/arch/arm/mach-omap1/board-nokia770.c
index 24d2f2d..4695ca7 100644
--- a/arch/arm/mach-omap1/board-nokia770.c
+++ b/arch/arm/mach-omap1/board-nokia770.c
@@ -242,6 +242,6 @@
.init_irq = omap1_init_irq,
.init_machine = omap_nokia770_init,
.init_late = omap1_init_late,
- .timer = &omap1_timer,
+ .init_time = omap1_timer_init,
.restart = omap1_restart,
MACHINE_END
diff --git a/arch/arm/mach-omap1/board-osk.c b/arch/arm/mach-omap1/board-osk.c
index 872ea47..a7ce692 100644
--- a/arch/arm/mach-omap1/board-osk.c
+++ b/arch/arm/mach-omap1/board-osk.c
@@ -609,6 +609,6 @@
.init_irq = omap1_init_irq,
.init_machine = osk_init,
.init_late = omap1_init_late,
- .timer = &omap1_timer,
+ .init_time = omap1_timer_init,
.restart = omap1_restart,
MACHINE_END
diff --git a/arch/arm/mach-omap1/board-palmte.c b/arch/arm/mach-omap1/board-palmte.c
index c33dceb..845a1a7 100644
--- a/arch/arm/mach-omap1/board-palmte.c
+++ b/arch/arm/mach-omap1/board-palmte.c
@@ -268,6 +268,6 @@
.init_irq = omap1_init_irq,
.init_machine = omap_palmte_init,
.init_late = omap1_init_late,
- .timer = &omap1_timer,
+ .init_time = omap1_timer_init,
.restart = omap1_restart,
MACHINE_END
diff --git a/arch/arm/mach-omap1/board-palmtt.c b/arch/arm/mach-omap1/board-palmtt.c
index 2948b0e..65a4a3e 100644
--- a/arch/arm/mach-omap1/board-palmtt.c
+++ b/arch/arm/mach-omap1/board-palmtt.c
@@ -314,6 +314,6 @@
.init_irq = omap1_init_irq,
.init_machine = omap_palmtt_init,
.init_late = omap1_init_late,
- .timer = &omap1_timer,
+ .init_time = omap1_timer_init,
.restart = omap1_restart,
MACHINE_END
diff --git a/arch/arm/mach-omap1/board-palmz71.c b/arch/arm/mach-omap1/board-palmz71.c
index 7a05895..01c9700 100644
--- a/arch/arm/mach-omap1/board-palmz71.c
+++ b/arch/arm/mach-omap1/board-palmz71.c
@@ -330,6 +330,6 @@
.init_irq = omap1_init_irq,
.init_machine = omap_palmz71_init,
.init_late = omap1_init_late,
- .timer = &omap1_timer,
+ .init_time = omap1_timer_init,
.restart = omap1_restart,
MACHINE_END
diff --git a/arch/arm/mach-omap1/board-perseus2.c b/arch/arm/mach-omap1/board-perseus2.c
index 27f8d12..8b2f712 100644
--- a/arch/arm/mach-omap1/board-perseus2.c
+++ b/arch/arm/mach-omap1/board-perseus2.c
@@ -326,6 +326,6 @@
.init_irq = omap1_init_irq,
.init_machine = omap_perseus2_init,
.init_late = omap1_init_late,
- .timer = &omap1_timer,
+ .init_time = omap1_timer_init,
.restart = omap1_restart,
MACHINE_END
diff --git a/arch/arm/mach-omap1/board-sx1.c b/arch/arm/mach-omap1/board-sx1.c
index 20ed52a..9732a98 100644
--- a/arch/arm/mach-omap1/board-sx1.c
+++ b/arch/arm/mach-omap1/board-sx1.c
@@ -407,6 +407,6 @@
.init_irq = omap1_init_irq,
.init_machine = omap_sx1_init,
.init_late = omap1_init_late,
- .timer = &omap1_timer,
+ .init_time = omap1_timer_init,
.restart = omap1_restart,
MACHINE_END
diff --git a/arch/arm/mach-omap1/board-voiceblue.c b/arch/arm/mach-omap1/board-voiceblue.c
index abf705f..6c116e1 100644
--- a/arch/arm/mach-omap1/board-voiceblue.c
+++ b/arch/arm/mach-omap1/board-voiceblue.c
@@ -289,6 +289,6 @@
.init_irq = omap1_init_irq,
.init_machine = voiceblue_init,
.init_late = omap1_init_late,
- .timer = &omap1_timer,
+ .init_time = omap1_timer_init,
.restart = voiceblue_restart,
MACHINE_END
diff --git a/arch/arm/mach-omap1/common.h b/arch/arm/mach-omap1/common.h
index b53e085..fb18831 100644
--- a/arch/arm/mach-omap1/common.h
+++ b/arch/arm/mach-omap1/common.h
@@ -75,7 +75,7 @@
extern void omap1_nand_cmd_ctl(struct mtd_info *mtd, int cmd,
unsigned int ctrl);
-extern struct sys_timer omap1_timer;
+extern void omap1_timer_init(void);
#ifdef CONFIG_OMAP_32K_TIMER
extern int omap_32k_timer_init(void);
#else
diff --git a/arch/arm/mach-omap1/include/mach/uncompress.h b/arch/arm/mach-omap1/include/mach/uncompress.h
index ad6fbe7..4869633 100644
--- a/arch/arm/mach-omap1/include/mach/uncompress.h
+++ b/arch/arm/mach-omap1/include/mach/uncompress.h
@@ -115,8 +115,3 @@
DEBUG_LL_OMAP1(3, sx1);
} while (0);
}
-
-/*
- * nothing to do
- */
-#define arch_decomp_wdog()
diff --git a/arch/arm/mach-omap1/time.c b/arch/arm/mach-omap1/time.c
index 4d4816f..726ec23 100644
--- a/arch/arm/mach-omap1/time.c
+++ b/arch/arm/mach-omap1/time.c
@@ -145,7 +145,6 @@
static struct clock_event_device clockevent_mpu_timer1 = {
.name = "mpu_timer1",
.features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
- .shift = 32,
.set_next_event = omap_mpu_set_next_event,
.set_mode = omap_mpu_set_mode,
};
@@ -170,15 +169,9 @@
setup_irq(INT_TIMER1, &omap_mpu_timer1_irq);
omap_mpu_timer_start(0, (rate / HZ) - 1, 1);
- clockevent_mpu_timer1.mult = div_sc(rate, NSEC_PER_SEC,
- clockevent_mpu_timer1.shift);
- clockevent_mpu_timer1.max_delta_ns =
- clockevent_delta2ns(-1, &clockevent_mpu_timer1);
- clockevent_mpu_timer1.min_delta_ns =
- clockevent_delta2ns(1, &clockevent_mpu_timer1);
-
clockevent_mpu_timer1.cpumask = cpumask_of(0);
- clockevents_register_device(&clockevent_mpu_timer1);
+ clockevents_config_and_register(&clockevent_mpu_timer1, rate,
+ 1, -1);
}
@@ -236,12 +229,8 @@
* Timer initialization
* ---------------------------------------------------------------------------
*/
-static void __init omap1_timer_init(void)
+void __init omap1_timer_init(void)
{
if (omap_32k_timer_init() != 0)
omap_mpu_timer_init();
}
-
-struct sys_timer omap1_timer = {
- .init = omap1_timer_init,
-};
diff --git a/arch/arm/mach-omap1/timer32k.c b/arch/arm/mach-omap1/timer32k.c
index 41152fa..0b74246 100644
--- a/arch/arm/mach-omap1/timer32k.c
+++ b/arch/arm/mach-omap1/timer32k.c
@@ -140,7 +140,6 @@
static struct clock_event_device clockevent_32k_timer = {
.name = "32k-timer",
.features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
- .shift = 32,
.set_next_event = omap_32k_timer_set_next_event,
.set_mode = omap_32k_timer_set_mode,
};
@@ -165,16 +164,9 @@
{
setup_irq(INT_OS_TIMER, &omap_32k_timer_irq);
- clockevent_32k_timer.mult = div_sc(OMAP_32K_TICKS_PER_SEC,
- NSEC_PER_SEC,
- clockevent_32k_timer.shift);
- clockevent_32k_timer.max_delta_ns =
- clockevent_delta2ns(0xfffffffe, &clockevent_32k_timer);
- clockevent_32k_timer.min_delta_ns =
- clockevent_delta2ns(1, &clockevent_32k_timer);
-
clockevent_32k_timer.cpumask = cpumask_of(0);
- clockevents_register_device(&clockevent_32k_timer);
+ clockevents_config_and_register(&clockevent_32k_timer,
+ OMAP_32K_TICKS_PER_SEC, 1, 0xfffffffe);
}
/*
diff --git a/arch/arm/mach-omap2/board-2430sdp.c b/arch/arm/mach-omap2/board-2430sdp.c
index 1337f2c..a3e0aaa 100644
--- a/arch/arm/mach-omap2/board-2430sdp.c
+++ b/arch/arm/mach-omap2/board-2430sdp.c
@@ -286,6 +286,6 @@
.handle_irq = omap2_intc_handle_irq,
.init_machine = omap_2430sdp_init,
.init_late = omap2430_init_late,
- .timer = &omap2_timer,
+ .init_time = omap2_sync32k_timer_init,
.restart = omap2xxx_restart,
MACHINE_END
diff --git a/arch/arm/mach-omap2/board-3430sdp.c b/arch/arm/mach-omap2/board-3430sdp.c
index 8a2e242..e71ebde 100644
--- a/arch/arm/mach-omap2/board-3430sdp.c
+++ b/arch/arm/mach-omap2/board-3430sdp.c
@@ -599,6 +599,6 @@
.handle_irq = omap3_intc_handle_irq,
.init_machine = omap_3430sdp_init,
.init_late = omap3430_init_late,
- .timer = &omap3_timer,
+ .init_time = omap3_sync32k_timer_init,
.restart = omap3xxx_restart,
MACHINE_END
diff --git a/arch/arm/mach-omap2/board-3630sdp.c b/arch/arm/mach-omap2/board-3630sdp.c
index 050aaa7..3384627 100644
--- a/arch/arm/mach-omap2/board-3630sdp.c
+++ b/arch/arm/mach-omap2/board-3630sdp.c
@@ -211,6 +211,6 @@
.handle_irq = omap3_intc_handle_irq,
.init_machine = omap_sdp_init,
.init_late = omap3630_init_late,
- .timer = &omap3_timer,
+ .init_time = omap3_sync32k_timer_init,
.restart = omap3xxx_restart,
MACHINE_END
diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c
index 8e8efcc..508e275 100644
--- a/arch/arm/mach-omap2/board-4430sdp.c
+++ b/arch/arm/mach-omap2/board-4430sdp.c
@@ -26,11 +26,11 @@
#include <linux/regulator/fixed.h>
#include <linux/leds.h>
#include <linux/leds_pwm.h>
+#include <linux/irqchip/arm-gic.h>
#include <linux/platform_data/omap4-keypad.h>
#include <linux/usb/musb.h>
#include <linux/usb/phy.h>
-#include <asm/hardware/gic.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
@@ -724,9 +724,8 @@
.map_io = omap4_map_io,
.init_early = omap4430_init_early,
.init_irq = gic_init_irq,
- .handle_irq = gic_handle_irq,
.init_machine = omap_4430sdp_init,
.init_late = omap4430_init_late,
- .timer = &omap4_timer,
+ .init_time = omap4_local_timer_init,
.restart = omap44xx_restart,
MACHINE_END
diff --git a/arch/arm/mach-omap2/board-am3517crane.c b/arch/arm/mach-omap2/board-am3517crane.c
index 51b96a1..07f0be2 100644
--- a/arch/arm/mach-omap2/board-am3517crane.c
+++ b/arch/arm/mach-omap2/board-am3517crane.c
@@ -92,6 +92,6 @@
.handle_irq = omap3_intc_handle_irq,
.init_machine = am3517_crane_init,
.init_late = am35xx_init_late,
- .timer = &omap3_timer,
+ .init_time = omap3_sync32k_timer_init,
.restart = omap3xxx_restart,
MACHINE_END
diff --git a/arch/arm/mach-omap2/board-am3517evm.c b/arch/arm/mach-omap2/board-am3517evm.c
index f81a303..6f5b2a0 100644
--- a/arch/arm/mach-omap2/board-am3517evm.c
+++ b/arch/arm/mach-omap2/board-am3517evm.c
@@ -393,6 +393,6 @@
.handle_irq = omap3_intc_handle_irq,
.init_machine = am3517_evm_init,
.init_late = am35xx_init_late,
- .timer = &omap3_timer,
+ .init_time = omap3_sync32k_timer_init,
.restart = omap3xxx_restart,
MACHINE_END
diff --git a/arch/arm/mach-omap2/board-apollon.c b/arch/arm/mach-omap2/board-apollon.c
index 5d0a61f..3a6ca74 100644
--- a/arch/arm/mach-omap2/board-apollon.c
+++ b/arch/arm/mach-omap2/board-apollon.c
@@ -337,6 +337,6 @@
.handle_irq = omap2_intc_handle_irq,
.init_machine = omap_apollon_init,
.init_late = omap2420_init_late,
- .timer = &omap2_timer,
+ .init_time = omap2_sync32k_timer_init,
.restart = omap2xxx_restart,
MACHINE_END
diff --git a/arch/arm/mach-omap2/board-cm-t35.c b/arch/arm/mach-omap2/board-cm-t35.c
index f1172f2..231a7d8 100644
--- a/arch/arm/mach-omap2/board-cm-t35.c
+++ b/arch/arm/mach-omap2/board-cm-t35.c
@@ -753,7 +753,7 @@
.handle_irq = omap3_intc_handle_irq,
.init_machine = cm_t35_init,
.init_late = omap35xx_init_late,
- .timer = &omap3_timer,
+ .init_time = omap3_sync32k_timer_init,
.restart = omap3xxx_restart,
MACHINE_END
@@ -766,6 +766,6 @@
.handle_irq = omap3_intc_handle_irq,
.init_machine = cm_t3730_init,
.init_late = omap3630_init_late,
- .timer = &omap3_timer,
+ .init_time = omap3_sync32k_timer_init,
.restart = omap3xxx_restart,
MACHINE_END
diff --git a/arch/arm/mach-omap2/board-cm-t3517.c b/arch/arm/mach-omap2/board-cm-t3517.c
index ebbc2ad..6a9529a 100644
--- a/arch/arm/mach-omap2/board-cm-t3517.c
+++ b/arch/arm/mach-omap2/board-cm-t3517.c
@@ -297,6 +297,6 @@
.handle_irq = omap3_intc_handle_irq,
.init_machine = cm_t3517_init,
.init_late = am35xx_init_late,
- .timer = &omap3_gp_timer,
+ .init_time = omap3_gp_gptimer_timer_init,
.restart = omap3xxx_restart,
MACHINE_END
diff --git a/arch/arm/mach-omap2/board-devkit8000.c b/arch/arm/mach-omap2/board-devkit8000.c
index 77cade52..a37514e 100644
--- a/arch/arm/mach-omap2/board-devkit8000.c
+++ b/arch/arm/mach-omap2/board-devkit8000.c
@@ -645,6 +645,6 @@
.handle_irq = omap3_intc_handle_irq,
.init_machine = devkit8000_init,
.init_late = omap35xx_init_late,
- .timer = &omap3_secure_timer,
+ .init_time = omap3_secure_sync32k_timer_init,
.restart = omap3xxx_restart,
MACHINE_END
diff --git a/arch/arm/mach-omap2/board-generic.c b/arch/arm/mach-omap2/board-generic.c
index 53cb380b..2590463 100644
--- a/arch/arm/mach-omap2/board-generic.c
+++ b/arch/arm/mach-omap2/board-generic.c
@@ -16,7 +16,6 @@
#include <linux/of_platform.h>
#include <linux/irqdomain.h>
-#include <asm/hardware/gic.h>
#include <asm/mach/arch.h>
#include "common.h"
@@ -65,7 +64,7 @@
.init_irq = omap_intc_of_init,
.handle_irq = omap2_intc_handle_irq,
.init_machine = omap_generic_init,
- .timer = &omap2_timer,
+ .init_time = omap2_sync32k_timer_init,
.dt_compat = omap242x_boards_compat,
.restart = omap2xxx_restart,
MACHINE_END
@@ -84,7 +83,7 @@
.init_irq = omap_intc_of_init,
.handle_irq = omap2_intc_handle_irq,
.init_machine = omap_generic_init,
- .timer = &omap2_timer,
+ .init_time = omap2_sync32k_timer_init,
.dt_compat = omap243x_boards_compat,
.restart = omap2xxx_restart,
MACHINE_END
@@ -103,7 +102,7 @@
.init_irq = omap_intc_of_init,
.handle_irq = omap3_intc_handle_irq,
.init_machine = omap_generic_init,
- .timer = &omap3_timer,
+ .init_time = omap3_sync32k_timer_init,
.dt_compat = omap3_boards_compat,
.restart = omap3xxx_restart,
MACHINE_END
@@ -120,7 +119,7 @@
.init_irq = omap_intc_of_init,
.handle_irq = omap3_intc_handle_irq,
.init_machine = omap_generic_init,
- .timer = &omap3_secure_timer,
+ .init_time = omap3_secure_sync32k_timer_init,
.dt_compat = omap3_gp_boards_compat,
.restart = omap3xxx_restart,
MACHINE_END
@@ -139,7 +138,7 @@
.init_irq = omap_intc_of_init,
.handle_irq = omap3_intc_handle_irq,
.init_machine = omap_generic_init,
- .timer = &omap3_am33xx_timer,
+ .init_time = omap3_am33xx_gptimer_timer_init,
.dt_compat = am33xx_boards_compat,
MACHINE_END
#endif
@@ -156,10 +155,9 @@
.map_io = omap4_map_io,
.init_early = omap4430_init_early,
.init_irq = omap_gic_of_init,
- .handle_irq = gic_handle_irq,
.init_machine = omap_generic_init,
.init_late = omap4430_init_late,
- .timer = &omap4_timer,
+ .init_time = omap4_local_timer_init,
.dt_compat = omap4_boards_compat,
.restart = omap44xx_restart,
MACHINE_END
@@ -177,9 +175,8 @@
.map_io = omap5_map_io,
.init_early = omap5_init_early,
.init_irq = omap_gic_of_init,
- .handle_irq = gic_handle_irq,
.init_machine = omap_generic_init,
- .timer = &omap5_timer,
+ .init_time = omap5_realtime_timer_init,
.dt_compat = omap5_boards_compat,
.restart = omap44xx_restart,
MACHINE_END
diff --git a/arch/arm/mach-omap2/board-h4.c b/arch/arm/mach-omap2/board-h4.c
index 3be1311..812c829 100644
--- a/arch/arm/mach-omap2/board-h4.c
+++ b/arch/arm/mach-omap2/board-h4.c
@@ -342,6 +342,6 @@
.handle_irq = omap2_intc_handle_irq,
.init_machine = omap_h4_init,
.init_late = omap2420_init_late,
- .timer = &omap2_timer,
+ .init_time = omap2_sync32k_timer_init,
.restart = omap2xxx_restart,
MACHINE_END
diff --git a/arch/arm/mach-omap2/board-igep0020.c b/arch/arm/mach-omap2/board-igep0020.c
index 15e5881..3f97f30 100644
--- a/arch/arm/mach-omap2/board-igep0020.c
+++ b/arch/arm/mach-omap2/board-igep0020.c
@@ -657,7 +657,7 @@
.handle_irq = omap3_intc_handle_irq,
.init_machine = igep_init,
.init_late = omap35xx_init_late,
- .timer = &omap3_timer,
+ .init_time = omap3_sync32k_timer_init,
.restart = omap3xxx_restart,
MACHINE_END
@@ -670,6 +670,6 @@
.handle_irq = omap3_intc_handle_irq,
.init_machine = igep_init,
.init_late = omap35xx_init_late,
- .timer = &omap3_timer,
+ .init_time = omap3_sync32k_timer_init,
.restart = omap3xxx_restart,
MACHINE_END
diff --git a/arch/arm/mach-omap2/board-ldp.c b/arch/arm/mach-omap2/board-ldp.c
index 3b5510a..b12fe96 100644
--- a/arch/arm/mach-omap2/board-ldp.c
+++ b/arch/arm/mach-omap2/board-ldp.c
@@ -437,6 +437,6 @@
.handle_irq = omap3_intc_handle_irq,
.init_machine = omap_ldp_init,
.init_late = omap3430_init_late,
- .timer = &omap3_timer,
+ .init_time = omap3_sync32k_timer_init,
.restart = omap3xxx_restart,
MACHINE_END
diff --git a/arch/arm/mach-omap2/board-n8x0.c b/arch/arm/mach-omap2/board-n8x0.c
index 0abb30f..f6eeb87 100644
--- a/arch/arm/mach-omap2/board-n8x0.c
+++ b/arch/arm/mach-omap2/board-n8x0.c
@@ -731,7 +731,7 @@
.handle_irq = omap2_intc_handle_irq,
.init_machine = n8x0_init_machine,
.init_late = omap2420_init_late,
- .timer = &omap2_timer,
+ .init_time = omap2_sync32k_timer_init,
.restart = omap2xxx_restart,
MACHINE_END
@@ -744,7 +744,7 @@
.handle_irq = omap2_intc_handle_irq,
.init_machine = n8x0_init_machine,
.init_late = omap2420_init_late,
- .timer = &omap2_timer,
+ .init_time = omap2_sync32k_timer_init,
.restart = omap2xxx_restart,
MACHINE_END
@@ -757,6 +757,6 @@
.handle_irq = omap2_intc_handle_irq,
.init_machine = n8x0_init_machine,
.init_late = omap2420_init_late,
- .timer = &omap2_timer,
+ .init_time = omap2_sync32k_timer_init,
.restart = omap2xxx_restart,
MACHINE_END
diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c
index 4616f92..d07058b 100644
--- a/arch/arm/mach-omap2/board-omap3beagle.c
+++ b/arch/arm/mach-omap2/board-omap3beagle.c
@@ -546,6 +546,6 @@
.handle_irq = omap3_intc_handle_irq,
.init_machine = omap3_beagle_init,
.init_late = omap3_init_late,
- .timer = &omap3_secure_timer,
+ .init_time = omap3_secure_sync32k_timer_init,
.restart = omap3xxx_restart,
MACHINE_END
diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c
index 2023895..f437636 100644
--- a/arch/arm/mach-omap2/board-omap3evm.c
+++ b/arch/arm/mach-omap2/board-omap3evm.c
@@ -759,6 +759,6 @@
.handle_irq = omap3_intc_handle_irq,
.init_machine = omap3_evm_init,
.init_late = omap35xx_init_late,
- .timer = &omap3_timer,
+ .init_time = omap3_sync32k_timer_init,
.restart = omap3xxx_restart,
MACHINE_END
diff --git a/arch/arm/mach-omap2/board-omap3logic.c b/arch/arm/mach-omap2/board-omap3logic.c
index 9409eb8..bab51e6 100644
--- a/arch/arm/mach-omap2/board-omap3logic.c
+++ b/arch/arm/mach-omap2/board-omap3logic.c
@@ -233,7 +233,7 @@
.handle_irq = omap3_intc_handle_irq,
.init_machine = omap3logic_init,
.init_late = omap35xx_init_late,
- .timer = &omap3_timer,
+ .init_time = omap3_sync32k_timer_init,
.restart = omap3xxx_restart,
MACHINE_END
@@ -246,6 +246,6 @@
.handle_irq = omap3_intc_handle_irq,
.init_machine = omap3logic_init,
.init_late = omap35xx_init_late,
- .timer = &omap3_timer,
+ .init_time = omap3_sync32k_timer_init,
.restart = omap3xxx_restart,
MACHINE_END
diff --git a/arch/arm/mach-omap2/board-omap3pandora.c b/arch/arm/mach-omap2/board-omap3pandora.c
index 1ac3e81..07cc088 100644
--- a/arch/arm/mach-omap2/board-omap3pandora.c
+++ b/arch/arm/mach-omap2/board-omap3pandora.c
@@ -620,6 +620,6 @@
.handle_irq = omap3_intc_handle_irq,
.init_machine = omap3pandora_init,
.init_late = omap35xx_init_late,
- .timer = &omap3_timer,
+ .init_time = omap3_sync32k_timer_init,
.restart = omap3xxx_restart,
MACHINE_END
diff --git a/arch/arm/mach-omap2/board-omap3stalker.c b/arch/arm/mach-omap2/board-omap3stalker.c
index 63cb204..0490acb 100644
--- a/arch/arm/mach-omap2/board-omap3stalker.c
+++ b/arch/arm/mach-omap2/board-omap3stalker.c
@@ -429,6 +429,6 @@
.handle_irq = omap3_intc_handle_irq,
.init_machine = omap3_stalker_init,
.init_late = omap35xx_init_late,
- .timer = &omap3_secure_timer,
+ .init_time = omap3_secure_sync32k_timer_init,
.restart = omap3xxx_restart,
MACHINE_END
diff --git a/arch/arm/mach-omap2/board-omap3touchbook.c b/arch/arm/mach-omap2/board-omap3touchbook.c
index 6b22ce3..91daf71 100644
--- a/arch/arm/mach-omap2/board-omap3touchbook.c
+++ b/arch/arm/mach-omap2/board-omap3touchbook.c
@@ -388,6 +388,6 @@
.handle_irq = omap3_intc_handle_irq,
.init_machine = omap3_touchbook_init,
.init_late = omap3430_init_late,
- .timer = &omap3_secure_timer,
+ .init_time = omap3_secure_sync32k_timer_init,
.restart = omap3xxx_restart,
MACHINE_END
diff --git a/arch/arm/mach-omap2/board-omap4panda.c b/arch/arm/mach-omap2/board-omap4panda.c
index 40184cc..7b152d0 100644
--- a/arch/arm/mach-omap2/board-omap4panda.c
+++ b/arch/arm/mach-omap2/board-omap4panda.c
@@ -32,9 +32,9 @@
#include <linux/usb/musb.h>
#include <linux/usb/phy.h>
#include <linux/wl12xx.h>
+#include <linux/irqchip/arm-gic.h>
#include <linux/platform_data/omap-abe-twl6040.h>
-#include <asm/hardware/gic.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
@@ -461,9 +461,8 @@
.map_io = omap4_map_io,
.init_early = omap4430_init_early,
.init_irq = gic_init_irq,
- .handle_irq = gic_handle_irq,
.init_machine = omap4_panda_init,
.init_late = omap4430_init_late,
- .timer = &omap4_timer,
+ .init_time = omap4_local_timer_init,
.restart = omap44xx_restart,
MACHINE_END
diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c
index 7e43ff3..6975a85 100644
--- a/arch/arm/mach-omap2/board-overo.c
+++ b/arch/arm/mach-omap2/board-overo.c
@@ -553,6 +553,6 @@
.handle_irq = omap3_intc_handle_irq,
.init_machine = overo_init,
.init_late = omap35xx_init_late,
- .timer = &omap3_timer,
+ .init_time = omap3_sync32k_timer_init,
.restart = omap3xxx_restart,
MACHINE_END
diff --git a/arch/arm/mach-omap2/board-rm680.c b/arch/arm/mach-omap2/board-rm680.c
index f8a272c..345e8c4 100644
--- a/arch/arm/mach-omap2/board-rm680.c
+++ b/arch/arm/mach-omap2/board-rm680.c
@@ -149,7 +149,7 @@
.handle_irq = omap3_intc_handle_irq,
.init_machine = rm680_init,
.init_late = omap3630_init_late,
- .timer = &omap3_timer,
+ .init_time = omap3_sync32k_timer_init,
.restart = omap3xxx_restart,
MACHINE_END
@@ -162,6 +162,6 @@
.handle_irq = omap3_intc_handle_irq,
.init_machine = rm680_init,
.init_late = omap3630_init_late,
- .timer = &omap3_timer,
+ .init_time = omap3_sync32k_timer_init,
.restart = omap3xxx_restart,
MACHINE_END
diff --git a/arch/arm/mach-omap2/board-rx51.c b/arch/arm/mach-omap2/board-rx51.c
index d0374ea..f7c4616 100644
--- a/arch/arm/mach-omap2/board-rx51.c
+++ b/arch/arm/mach-omap2/board-rx51.c
@@ -123,6 +123,6 @@
.handle_irq = omap3_intc_handle_irq,
.init_machine = rx51_init,
.init_late = omap3430_init_late,
- .timer = &omap3_timer,
+ .init_time = omap3_sync32k_timer_init,
.restart = omap3xxx_restart,
MACHINE_END
diff --git a/arch/arm/mach-omap2/board-ti8168evm.c b/arch/arm/mach-omap2/board-ti8168evm.c
index 1a3e056..6273c28 100644
--- a/arch/arm/mach-omap2/board-ti8168evm.c
+++ b/arch/arm/mach-omap2/board-ti8168evm.c
@@ -43,7 +43,7 @@
.map_io = ti81xx_map_io,
.init_early = ti81xx_init_early,
.init_irq = ti81xx_init_irq,
- .timer = &omap3_timer,
+ .init_time = omap3_sync32k_timer_init,
.init_machine = ti81xx_evm_init,
.init_late = ti81xx_init_late,
.restart = omap44xx_restart,
@@ -55,7 +55,7 @@
.map_io = ti81xx_map_io,
.init_early = ti81xx_init_early,
.init_irq = ti81xx_init_irq,
- .timer = &omap3_timer,
+ .init_time = omap3_sync32k_timer_init,
.init_machine = ti81xx_evm_init,
.init_late = ti81xx_init_late,
.restart = omap44xx_restart,
diff --git a/arch/arm/mach-omap2/board-zoom.c b/arch/arm/mach-omap2/board-zoom.c
index d7fa31e..d257cf1 100644
--- a/arch/arm/mach-omap2/board-zoom.c
+++ b/arch/arm/mach-omap2/board-zoom.c
@@ -137,7 +137,7 @@
.handle_irq = omap3_intc_handle_irq,
.init_machine = omap_zoom_init,
.init_late = omap3430_init_late,
- .timer = &omap3_timer,
+ .init_time = omap3_sync32k_timer_init,
.restart = omap3xxx_restart,
MACHINE_END
@@ -150,6 +150,6 @@
.handle_irq = omap3_intc_handle_irq,
.init_machine = omap_zoom_init,
.init_late = omap3630_init_late,
- .timer = &omap3_timer,
+ .init_time = omap3_sync32k_timer_init,
.restart = omap3xxx_restart,
MACHINE_END
diff --git a/arch/arm/mach-omap2/common.h b/arch/arm/mach-omap2/common.h
index 948bcaa..b435027 100644
--- a/arch/arm/mach-omap2/common.h
+++ b/arch/arm/mach-omap2/common.h
@@ -79,13 +79,13 @@
extern void omap2_init_common_infrastructure(void);
-extern struct sys_timer omap2_timer;
-extern struct sys_timer omap3_timer;
-extern struct sys_timer omap3_secure_timer;
-extern struct sys_timer omap3_gp_timer;
-extern struct sys_timer omap3_am33xx_timer;
-extern struct sys_timer omap4_timer;
-extern struct sys_timer omap5_timer;
+extern void omap2_sync32k_timer_init(void);
+extern void omap3_sync32k_timer_init(void);
+extern void omap3_secure_sync32k_timer_init(void);
+extern void omap3_gp_gptimer_timer_init(void);
+extern void omap3_am33xx_gptimer_timer_init(void);
+extern void omap4_local_timer_init(void);
+extern void omap5_realtime_timer_init(void);
void omap2420_init_early(void);
void omap2430_init_early(void);
diff --git a/arch/arm/mach-omap2/include/mach/uncompress.h b/arch/arm/mach-omap2/include/mach/uncompress.h
index 8e3546d..7b360ac 100644
--- a/arch/arm/mach-omap2/include/mach/uncompress.h
+++ b/arch/arm/mach-omap2/include/mach/uncompress.h
@@ -169,8 +169,3 @@
DEBUG_LL_AM33XX(1, am335xevm);
} while (0);
}
-
-/*
- * nothing to do
- */
-#define arch_decomp_wdog()
diff --git a/arch/arm/mach-omap2/omap-smp.c b/arch/arm/mach-omap2/omap-smp.c
index cd42d92..3616779 100644
--- a/arch/arm/mach-omap2/omap-smp.c
+++ b/arch/arm/mach-omap2/omap-smp.c
@@ -19,9 +19,9 @@
#include <linux/device.h>
#include <linux/smp.h>
#include <linux/io.h>
+#include <linux/irqchip/arm-gic.h>
#include <asm/cacheflush.h>
-#include <asm/hardware/gic.h>
#include <asm/smp_scu.h>
#include "omap-secure.h"
@@ -157,7 +157,7 @@
booted = true;
}
- gic_raise_softirq(cpumask_of(cpu), 0);
+ arch_send_wakeup_ipi_mask(cpumask_of(cpu));
/*
* Now the secondary core is starting up let it run its
@@ -231,8 +231,6 @@
for (i = 0; i < ncores; i++)
set_cpu_possible(i, true);
-
- set_smp_cross_call(gic_raise_softirq);
}
static void __init omap4_smp_prepare_cpus(unsigned int max_cpus)
diff --git a/arch/arm/mach-omap2/omap-wakeupgen.c b/arch/arm/mach-omap2/omap-wakeupgen.c
index 8633a43..f8bb3b9 100644
--- a/arch/arm/mach-omap2/omap-wakeupgen.c
+++ b/arch/arm/mach-omap2/omap-wakeupgen.c
@@ -24,8 +24,7 @@
#include <linux/cpu.h>
#include <linux/notifier.h>
#include <linux/cpu_pm.h>
-
-#include <asm/hardware/gic.h>
+#include <linux/irqchip/arm-gic.h>
#include "omap-wakeupgen.h"
#include "omap-secure.h"
diff --git a/arch/arm/mach-omap2/omap4-common.c b/arch/arm/mach-omap2/omap4-common.c
index 6897ae2..5470948 100644
--- a/arch/arm/mach-omap2/omap4-common.c
+++ b/arch/arm/mach-omap2/omap4-common.c
@@ -15,13 +15,14 @@
#include <linux/init.h>
#include <linux/io.h>
#include <linux/irq.h>
+#include <linux/irqchip.h>
#include <linux/platform_device.h>
#include <linux/memblock.h>
#include <linux/of_irq.h>
#include <linux/of_platform.h>
#include <linux/export.h>
+#include <linux/irqchip/arm-gic.h>
-#include <asm/hardware/gic.h>
#include <asm/hardware/cache-l2x0.h>
#include <asm/mach/map.h>
#include <asm/memblock.h>
@@ -255,16 +256,10 @@
}
early_initcall(omap4_sar_ram_init);
-static struct of_device_id irq_match[] __initdata = {
- { .compatible = "arm,cortex-a9-gic", .data = gic_of_init, },
- { .compatible = "arm,cortex-a15-gic", .data = gic_of_init, },
- { }
-};
-
void __init omap_gic_of_init(void)
{
omap_wakeupgen_init();
- of_irq_init(irq_match);
+ irqchip_init();
}
#if defined(CONFIG_MMC_OMAP_HS) || defined(CONFIG_MMC_OMAP_HS_MODULE)
diff --git a/arch/arm/mach-omap2/timer.c b/arch/arm/mach-omap2/timer.c
index 265de51..7172988 100644
--- a/arch/arm/mach-omap2/timer.c
+++ b/arch/arm/mach-omap2/timer.c
@@ -131,7 +131,6 @@
static struct clock_event_device clockevent_gpt = {
.name = "gp_timer",
.features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
- .shift = 32,
.rating = 300,
.set_next_event = omap2_gp_timer_set_next_event,
.set_mode = omap2_gp_timer_set_mode,
@@ -336,17 +335,11 @@
__omap_dm_timer_int_enable(&clkev, OMAP_TIMER_INT_OVERFLOW);
- clockevent_gpt.mult = div_sc(clkev.rate, NSEC_PER_SEC,
- clockevent_gpt.shift);
- clockevent_gpt.max_delta_ns =
- clockevent_delta2ns(0xffffffff, &clockevent_gpt);
- clockevent_gpt.min_delta_ns =
- clockevent_delta2ns(3, &clockevent_gpt);
- /* Timer internal resynch latency. */
-
clockevent_gpt.cpumask = cpu_possible_mask;
clockevent_gpt.irq = omap_dm_timer_get_irq(&clkev);
- clockevents_register_device(&clockevent_gpt);
+ clockevents_config_and_register(&clockevent_gpt, clkev.rate,
+ 3, /* Timer internal resynch latency */
+ 0xffffffff);
pr_info("OMAP clockevent source: GPTIMER%d at %lu Hz\n",
gptimer_id, clkev.rate);
@@ -552,7 +545,7 @@
#define OMAP_SYS_GP_TIMER_INIT(name, clkev_nr, clkev_src, clkev_prop, \
clksrc_nr, clksrc_src) \
-static void __init omap##name##_gptimer_timer_init(void) \
+void __init omap##name##_gptimer_timer_init(void) \
{ \
omap_dmtimer_init(); \
omap2_gp_clockevent_init((clkev_nr), clkev_src, clkev_prop); \
@@ -561,7 +554,7 @@
#define OMAP_SYS_32K_TIMER_INIT(name, clkev_nr, clkev_src, clkev_prop, \
clksrc_nr, clksrc_src) \
-static void __init omap##name##_sync32k_timer_init(void) \
+void __init omap##name##_sync32k_timer_init(void) \
{ \
omap_dmtimer_init(); \
omap2_gp_clockevent_init((clkev_nr), clkev_src, clkev_prop); \
@@ -572,33 +565,23 @@
omap2_sync32k_clocksource_init(); \
}
-#define OMAP_SYS_TIMER(name, clksrc) \
-struct sys_timer omap##name##_timer = { \
- .init = omap##name##_##clksrc##_timer_init, \
-};
-
#ifdef CONFIG_ARCH_OMAP2
OMAP_SYS_32K_TIMER_INIT(2, 1, OMAP2_32K_SOURCE, "ti,timer-alwon",
2, OMAP2_MPU_SOURCE);
-OMAP_SYS_TIMER(2, sync32k);
#endif /* CONFIG_ARCH_OMAP2 */
#ifdef CONFIG_ARCH_OMAP3
OMAP_SYS_32K_TIMER_INIT(3, 1, OMAP3_32K_SOURCE, "ti,timer-alwon",
2, OMAP3_MPU_SOURCE);
-OMAP_SYS_TIMER(3, sync32k);
OMAP_SYS_32K_TIMER_INIT(3_secure, 12, OMAP3_32K_SOURCE, "ti,timer-secure",
2, OMAP3_MPU_SOURCE);
-OMAP_SYS_TIMER(3_secure, sync32k);
OMAP_SYS_GP_TIMER_INIT(3_gp, 1, OMAP3_MPU_SOURCE, "ti,timer-alwon",
2, OMAP3_MPU_SOURCE);
-OMAP_SYS_TIMER(3_gp, gptimer);
#endif /* CONFIG_ARCH_OMAP3 */
#ifdef CONFIG_SOC_AM33XX
OMAP_SYS_GP_TIMER_INIT(3_am33xx, 1, OMAP4_MPU_SOURCE, "ti,timer-alwon",
2, OMAP4_MPU_SOURCE);
-OMAP_SYS_TIMER(3_am33xx, gptimer);
#endif /* CONFIG_SOC_AM33XX */
#ifdef CONFIG_ARCH_OMAP4
@@ -606,7 +589,7 @@
2, OMAP4_MPU_SOURCE);
#ifdef CONFIG_LOCAL_TIMERS
static DEFINE_TWD_LOCAL_TIMER(twd_local_timer, OMAP44XX_LOCAL_TWD_BASE, 29);
-static void __init omap4_local_timer_init(void)
+void __init omap4_local_timer_init(void)
{
omap4_sync32k_timer_init();
/* Local timers are not supprted on OMAP4430 ES1.0 */
@@ -624,18 +607,17 @@
}
}
#else /* CONFIG_LOCAL_TIMERS */
-static void __init omap4_local_timer_init(void)
+void __init omap4_local_timer_init(void)
{
omap4_sync32k_timer_init();
}
#endif /* CONFIG_LOCAL_TIMERS */
-OMAP_SYS_TIMER(4, local);
#endif /* CONFIG_ARCH_OMAP4 */
#ifdef CONFIG_SOC_OMAP5
OMAP_SYS_32K_TIMER_INIT(5, 1, OMAP4_32K_SOURCE, "ti,timer-alwon",
2, OMAP4_MPU_SOURCE);
-static void __init omap5_realtime_timer_init(void)
+void __init omap5_realtime_timer_init(void)
{
int err;
@@ -646,7 +628,6 @@
if (err)
pr_err("%s: arch_timer_register failed %d\n", __func__, err);
}
-OMAP_SYS_TIMER(5, realtime);
#endif /* CONFIG_SOC_OMAP5 */
/**
diff --git a/arch/arm/mach-orion5x/board-dt.c b/arch/arm/mach-orion5x/board-dt.c
index 32e5c21..35a8014 100644
--- a/arch/arm/mach-orion5x/board-dt.c
+++ b/arch/arm/mach-orion5x/board-dt.c
@@ -72,7 +72,7 @@
.map_io = orion5x_map_io,
.init_early = orion5x_init_early,
.init_irq = orion_dt_init_irq,
- .timer = &orion5x_timer,
+ .init_time = orion5x_timer_init,
.init_machine = orion5x_dt_init,
.restart = orion5x_restart,
.dt_compat = orion5x_dt_compat,
diff --git a/arch/arm/mach-orion5x/common.c b/arch/arm/mach-orion5x/common.c
index 550f923..d068f14 100644
--- a/arch/arm/mach-orion5x/common.c
+++ b/arch/arm/mach-orion5x/common.c
@@ -217,7 +217,7 @@
return 166666667;
}
-static void __init orion5x_timer_init(void)
+void __init orion5x_timer_init(void)
{
orion5x_tclk = orion5x_find_tclk();
@@ -225,10 +225,6 @@
IRQ_ORION5X_BRIDGE, orion5x_tclk);
}
-struct sys_timer orion5x_timer = {
- .init = orion5x_timer_init,
-};
-
/*****************************************************************************
* General
diff --git a/arch/arm/mach-orion5x/common.h b/arch/arm/mach-orion5x/common.h
index 7db5cdd..e603457 100644
--- a/arch/arm/mach-orion5x/common.h
+++ b/arch/arm/mach-orion5x/common.h
@@ -15,7 +15,7 @@
void orion5x_id(u32 *dev, u32 *rev, char **dev_name);
void clk_init(void);
extern int orion5x_tclk;
-extern struct sys_timer orion5x_timer;
+extern void orion5x_timer_init(void);
/*
* Enumerations and functions for Orion windows mapping. Used by Orion core
diff --git a/arch/arm/mach-orion5x/d2net-setup.c b/arch/arm/mach-orion5x/d2net-setup.c
index e3629c0..57d0af7 100644
--- a/arch/arm/mach-orion5x/d2net-setup.c
+++ b/arch/arm/mach-orion5x/d2net-setup.c
@@ -342,7 +342,7 @@
.map_io = orion5x_map_io,
.init_early = orion5x_init_early,
.init_irq = orion5x_init_irq,
- .timer = &orion5x_timer,
+ .init_time = orion5x_timer_init,
.fixup = tag_fixup_mem32,
.restart = orion5x_restart,
MACHINE_END
@@ -355,7 +355,7 @@
.map_io = orion5x_map_io,
.init_early = orion5x_init_early,
.init_irq = orion5x_init_irq,
- .timer = &orion5x_timer,
+ .init_time = orion5x_timer_init,
.fixup = tag_fixup_mem32,
.restart = orion5x_restart,
MACHINE_END
diff --git a/arch/arm/mach-orion5x/db88f5281-setup.c b/arch/arm/mach-orion5x/db88f5281-setup.c
index 41fe2b1..7666564 100644
--- a/arch/arm/mach-orion5x/db88f5281-setup.c
+++ b/arch/arm/mach-orion5x/db88f5281-setup.c
@@ -362,6 +362,6 @@
.map_io = orion5x_map_io,
.init_early = orion5x_init_early,
.init_irq = orion5x_init_irq,
- .timer = &orion5x_timer,
+ .init_time = orion5x_timer_init,
.restart = orion5x_restart,
MACHINE_END
diff --git a/arch/arm/mach-orion5x/dns323-setup.c b/arch/arm/mach-orion5x/dns323-setup.c
index e533588..6eb1732 100644
--- a/arch/arm/mach-orion5x/dns323-setup.c
+++ b/arch/arm/mach-orion5x/dns323-setup.c
@@ -714,7 +714,7 @@
.map_io = orion5x_map_io,
.init_early = orion5x_init_early,
.init_irq = orion5x_init_irq,
- .timer = &orion5x_timer,
+ .init_time = orion5x_timer_init,
.fixup = tag_fixup_mem32,
.restart = orion5x_restart,
MACHINE_END
diff --git a/arch/arm/mach-orion5x/include/mach/uncompress.h b/arch/arm/mach-orion5x/include/mach/uncompress.h
index 4322dba..abd26b5 100644
--- a/arch/arm/mach-orion5x/include/mach/uncompress.h
+++ b/arch/arm/mach-orion5x/include/mach/uncompress.h
@@ -46,4 +46,3 @@
* nothing to do
*/
#define arch_decomp_setup()
-#define arch_decomp_wdog()
diff --git a/arch/arm/mach-orion5x/kurobox_pro-setup.c b/arch/arm/mach-orion5x/kurobox_pro-setup.c
index f1ae10a..b984035 100644
--- a/arch/arm/mach-orion5x/kurobox_pro-setup.c
+++ b/arch/arm/mach-orion5x/kurobox_pro-setup.c
@@ -383,7 +383,7 @@
.map_io = orion5x_map_io,
.init_early = orion5x_init_early,
.init_irq = orion5x_init_irq,
- .timer = &orion5x_timer,
+ .init_time = orion5x_timer_init,
.fixup = tag_fixup_mem32,
.restart = orion5x_restart,
MACHINE_END
@@ -397,7 +397,7 @@
.map_io = orion5x_map_io,
.init_early = orion5x_init_early,
.init_irq = orion5x_init_irq,
- .timer = &orion5x_timer,
+ .init_time = orion5x_timer_init,
.fixup = tag_fixup_mem32,
.restart = orion5x_restart,
MACHINE_END
diff --git a/arch/arm/mach-orion5x/ls-chl-setup.c b/arch/arm/mach-orion5x/ls-chl-setup.c
index 0c9e413..044da5b 100644
--- a/arch/arm/mach-orion5x/ls-chl-setup.c
+++ b/arch/arm/mach-orion5x/ls-chl-setup.c
@@ -322,7 +322,7 @@
.map_io = orion5x_map_io,
.init_early = orion5x_init_early,
.init_irq = orion5x_init_irq,
- .timer = &orion5x_timer,
+ .init_time = orion5x_timer_init,
.fixup = tag_fixup_mem32,
.restart = orion5x_restart,
MACHINE_END
diff --git a/arch/arm/mach-orion5x/ls_hgl-setup.c b/arch/arm/mach-orion5x/ls_hgl-setup.c
index c1b5d8a..d49f934 100644
--- a/arch/arm/mach-orion5x/ls_hgl-setup.c
+++ b/arch/arm/mach-orion5x/ls_hgl-setup.c
@@ -269,7 +269,7 @@
.map_io = orion5x_map_io,
.init_early = orion5x_init_early,
.init_irq = orion5x_init_irq,
- .timer = &orion5x_timer,
+ .init_time = orion5x_timer_init,
.fixup = tag_fixup_mem32,
.restart = orion5x_restart,
MACHINE_END
diff --git a/arch/arm/mach-orion5x/lsmini-setup.c b/arch/arm/mach-orion5x/lsmini-setup.c
index 949eaa8..8e3965c 100644
--- a/arch/arm/mach-orion5x/lsmini-setup.c
+++ b/arch/arm/mach-orion5x/lsmini-setup.c
@@ -271,7 +271,7 @@
.map_io = orion5x_map_io,
.init_early = orion5x_init_early,
.init_irq = orion5x_init_irq,
- .timer = &orion5x_timer,
+ .init_time = orion5x_timer_init,
.fixup = tag_fixup_mem32,
.restart = orion5x_restart,
MACHINE_END
diff --git a/arch/arm/mach-orion5x/mss2-setup.c b/arch/arm/mach-orion5x/mss2-setup.c
index 1c16d04..0ec94a1 100644
--- a/arch/arm/mach-orion5x/mss2-setup.c
+++ b/arch/arm/mach-orion5x/mss2-setup.c
@@ -265,7 +265,7 @@
.map_io = orion5x_map_io,
.init_early = orion5x_init_early,
.init_irq = orion5x_init_irq,
- .timer = &orion5x_timer,
+ .init_time = orion5x_timer_init,
.fixup = tag_fixup_mem32,
.restart = orion5x_restart,
MACHINE_END
diff --git a/arch/arm/mach-orion5x/mv2120-setup.c b/arch/arm/mach-orion5x/mv2120-setup.c
index c87fde4..18143f2 100644
--- a/arch/arm/mach-orion5x/mv2120-setup.c
+++ b/arch/arm/mach-orion5x/mv2120-setup.c
@@ -233,7 +233,7 @@
.map_io = orion5x_map_io,
.init_early = orion5x_init_early,
.init_irq = orion5x_init_irq,
- .timer = &orion5x_timer,
+ .init_time = orion5x_timer_init,
.fixup = tag_fixup_mem32,
.restart = orion5x_restart,
MACHINE_END
diff --git a/arch/arm/mach-orion5x/net2big-setup.c b/arch/arm/mach-orion5x/net2big-setup.c
index 3506f16..282e503 100644
--- a/arch/arm/mach-orion5x/net2big-setup.c
+++ b/arch/arm/mach-orion5x/net2big-setup.c
@@ -425,7 +425,7 @@
.map_io = orion5x_map_io,
.init_early = orion5x_init_early,
.init_irq = orion5x_init_irq,
- .timer = &orion5x_timer,
+ .init_time = orion5x_timer_init,
.fixup = tag_fixup_mem32,
.restart = orion5x_restart,
MACHINE_END
diff --git a/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c b/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c
index 9b1c953..d6e72f67 100644
--- a/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c
+++ b/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c
@@ -171,7 +171,7 @@
.map_io = orion5x_map_io,
.init_early = orion5x_init_early,
.init_irq = orion5x_init_irq,
- .timer = &orion5x_timer,
+ .init_time = orion5x_timer_init,
.fixup = tag_fixup_mem32,
.restart = orion5x_restart,
MACHINE_END
diff --git a/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c b/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c
index 51ba2b8..c8b7913 100644
--- a/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c
+++ b/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c
@@ -183,7 +183,7 @@
.map_io = orion5x_map_io,
.init_early = orion5x_init_early,
.init_irq = orion5x_init_irq,
- .timer = &orion5x_timer,
+ .init_time = orion5x_timer_init,
.fixup = tag_fixup_mem32,
.restart = orion5x_restart,
MACHINE_END
diff --git a/arch/arm/mach-orion5x/rd88f5182-setup.c b/arch/arm/mach-orion5x/rd88f5182-setup.c
index 0a56b94..f9e1567 100644
--- a/arch/arm/mach-orion5x/rd88f5182-setup.c
+++ b/arch/arm/mach-orion5x/rd88f5182-setup.c
@@ -281,6 +281,6 @@
.map_io = orion5x_map_io,
.init_early = orion5x_init_early,
.init_irq = orion5x_init_irq,
- .timer = &orion5x_timer,
+ .init_time = orion5x_timer_init,
.restart = orion5x_restart,
MACHINE_END
diff --git a/arch/arm/mach-orion5x/rd88f6183ap-ge-setup.c b/arch/arm/mach-orion5x/rd88f6183ap-ge-setup.c
index ed50910..78a1e6a 100644
--- a/arch/arm/mach-orion5x/rd88f6183ap-ge-setup.c
+++ b/arch/arm/mach-orion5x/rd88f6183ap-ge-setup.c
@@ -123,7 +123,7 @@
.map_io = orion5x_map_io,
.init_early = orion5x_init_early,
.init_irq = orion5x_init_irq,
- .timer = &orion5x_timer,
+ .init_time = orion5x_timer_init,
.fixup = tag_fixup_mem32,
.restart = orion5x_restart,
MACHINE_END
diff --git a/arch/arm/mach-orion5x/terastation_pro2-setup.c b/arch/arm/mach-orion5x/terastation_pro2-setup.c
index 90e571d..acc0877 100644
--- a/arch/arm/mach-orion5x/terastation_pro2-setup.c
+++ b/arch/arm/mach-orion5x/terastation_pro2-setup.c
@@ -361,7 +361,7 @@
.map_io = orion5x_map_io,
.init_early = orion5x_init_early,
.init_irq = orion5x_init_irq,
- .timer = &orion5x_timer,
+ .init_time = orion5x_timer_init,
.fixup = tag_fixup_mem32,
.restart = orion5x_restart,
MACHINE_END
diff --git a/arch/arm/mach-orion5x/ts209-setup.c b/arch/arm/mach-orion5x/ts209-setup.c
index b184f68..9c17f0c 100644
--- a/arch/arm/mach-orion5x/ts209-setup.c
+++ b/arch/arm/mach-orion5x/ts209-setup.c
@@ -326,7 +326,7 @@
.map_io = orion5x_map_io,
.init_early = orion5x_init_early,
.init_irq = orion5x_init_irq,
- .timer = &orion5x_timer,
+ .init_time = orion5x_timer_init,
.fixup = tag_fixup_mem32,
.restart = orion5x_restart,
MACHINE_END
diff --git a/arch/arm/mach-orion5x/ts409-setup.c b/arch/arm/mach-orion5x/ts409-setup.c
index a5c2e64..8cc5ab6 100644
--- a/arch/arm/mach-orion5x/ts409-setup.c
+++ b/arch/arm/mach-orion5x/ts409-setup.c
@@ -315,7 +315,7 @@
.map_io = orion5x_map_io,
.init_early = orion5x_init_early,
.init_irq = orion5x_init_irq,
- .timer = &orion5x_timer,
+ .init_time = orion5x_timer_init,
.fixup = tag_fixup_mem32,
.restart = orion5x_restart,
MACHINE_END
diff --git a/arch/arm/mach-orion5x/ts78xx-setup.c b/arch/arm/mach-orion5x/ts78xx-setup.c
index b0727dc..e960855 100644
--- a/arch/arm/mach-orion5x/ts78xx-setup.c
+++ b/arch/arm/mach-orion5x/ts78xx-setup.c
@@ -619,6 +619,6 @@
.map_io = ts78xx_map_io,
.init_early = orion5x_init_early,
.init_irq = orion5x_init_irq,
- .timer = &orion5x_timer,
+ .init_time = orion5x_timer_init,
.restart = orion5x_restart,
MACHINE_END
diff --git a/arch/arm/mach-orion5x/wnr854t-setup.c b/arch/arm/mach-orion5x/wnr854t-setup.c
index 754c12b..66552ca 100644
--- a/arch/arm/mach-orion5x/wnr854t-setup.c
+++ b/arch/arm/mach-orion5x/wnr854t-setup.c
@@ -176,7 +176,7 @@
.map_io = orion5x_map_io,
.init_early = orion5x_init_early,
.init_irq = orion5x_init_irq,
- .timer = &orion5x_timer,
+ .init_time = orion5x_timer_init,
.fixup = tag_fixup_mem32,
.restart = orion5x_restart,
MACHINE_END
diff --git a/arch/arm/mach-orion5x/wrt350n-v2-setup.c b/arch/arm/mach-orion5x/wrt350n-v2-setup.c
index 45c2125..2c5408e 100644
--- a/arch/arm/mach-orion5x/wrt350n-v2-setup.c
+++ b/arch/arm/mach-orion5x/wrt350n-v2-setup.c
@@ -264,7 +264,7 @@
.map_io = orion5x_map_io,
.init_early = orion5x_init_early,
.init_irq = orion5x_init_irq,
- .timer = &orion5x_timer,
+ .init_time = orion5x_timer_init,
.fixup = tag_fixup_mem32,
.restart = orion5x_restart,
MACHINE_END
diff --git a/arch/arm/mach-picoxcell/Kconfig b/arch/arm/mach-picoxcell/Kconfig
index 868796f..13bae78 100644
--- a/arch/arm/mach-picoxcell/Kconfig
+++ b/arch/arm/mach-picoxcell/Kconfig
@@ -7,7 +7,6 @@
select DW_APB_TIMER
select DW_APB_TIMER_OF
select GENERIC_CLOCKEVENTS
- select GENERIC_GPIO
select HAVE_TCM
select NO_IOPORT
select SPARSE_IRQ
diff --git a/arch/arm/mach-picoxcell/common.c b/arch/arm/mach-picoxcell/common.c
index f6c0849..70b441a 100644
--- a/arch/arm/mach-picoxcell/common.c
+++ b/arch/arm/mach-picoxcell/common.c
@@ -9,6 +9,7 @@
*/
#include <linux/delay.h>
#include <linux/irq.h>
+#include <linux/irqchip.h>
#include <linux/irqdomain.h>
#include <linux/of.h>
#include <linux/of_address.h>
@@ -17,7 +18,6 @@
#include <linux/dw_apb_timer.h>
#include <asm/mach/arch.h>
-#include <asm/hardware/vic.h>
#include <asm/mach/map.h>
#include "common.h"
@@ -70,16 +70,6 @@
NULL
};
-static const struct of_device_id vic_of_match[] __initconst = {
- { .compatible = "arm,pl192-vic", .data = vic_of_init, },
- { /* Sentinel */ }
-};
-
-static void __init picoxcell_init_irq(void)
-{
- of_irq_init(vic_of_match);
-}
-
static void picoxcell_wdt_restart(char mode, const char *cmd)
{
/*
@@ -97,9 +87,8 @@
DT_MACHINE_START(PICOXCELL, "Picochip picoXcell")
.map_io = picoxcell_map_io,
.nr_irqs = NR_IRQS_LEGACY,
- .init_irq = picoxcell_init_irq,
- .handle_irq = vic_handle_irq,
- .timer = &dw_apb_timer,
+ .init_irq = irqchip_init,
+ .init_time = dw_apb_timer_init,
.init_machine = picoxcell_init_machine,
.dt_compat = picoxcell_dt_match,
.restart = picoxcell_wdt_restart,
diff --git a/arch/arm/mach-picoxcell/common.h b/arch/arm/mach-picoxcell/common.h
index a65cb02..481b42a 100644
--- a/arch/arm/mach-picoxcell/common.h
+++ b/arch/arm/mach-picoxcell/common.h
@@ -12,6 +12,6 @@
#include <asm/mach/time.h>
-extern struct sys_timer dw_apb_timer;
+extern void dw_apb_timer_init(void);
#endif /* __PICOXCELL_COMMON_H__ */
diff --git a/arch/arm/mach-prima2/common.c b/arch/arm/mach-prima2/common.c
index f25a541..ed3570e 100644
--- a/arch/arm/mach-prima2/common.c
+++ b/arch/arm/mach-prima2/common.c
@@ -40,7 +40,7 @@
/* Maintainer: Barry Song <baohua.song@csr.com> */
.map_io = sirfsoc_map_lluart,
.init_irq = sirfsoc_of_irq_init,
- .timer = &sirfsoc_timer,
+ .init_time = sirfsoc_timer_init,
.dma_zone_size = SZ_256M,
.init_machine = sirfsoc_mach_init,
.init_late = sirfsoc_init_late,
diff --git a/arch/arm/mach-prima2/common.h b/arch/arm/mach-prima2/common.h
index 60d826f..9c75f12 100644
--- a/arch/arm/mach-prima2/common.h
+++ b/arch/arm/mach-prima2/common.h
@@ -12,7 +12,7 @@
#include <linux/init.h>
#include <asm/mach/time.h>
-extern struct sys_timer sirfsoc_timer;
+extern void sirfsoc_timer_init(void);
extern void __init sirfsoc_of_irq_init(void);
extern void __init sirfsoc_of_clk_init(void);
diff --git a/arch/arm/mach-prima2/include/mach/uncompress.h b/arch/arm/mach-prima2/include/mach/uncompress.h
index 0c898fc..f72ca26 100644
--- a/arch/arm/mach-prima2/include/mach/uncompress.h
+++ b/arch/arm/mach-prima2/include/mach/uncompress.h
@@ -17,8 +17,6 @@
{
}
-#define arch_decomp_wdog()
-
static __inline__ void putc(char c)
{
/*
diff --git a/arch/arm/mach-prima2/timer.c b/arch/arm/mach-prima2/timer.c
index d95bf25..a7a2c19 100644
--- a/arch/arm/mach-prima2/timer.c
+++ b/arch/arm/mach-prima2/timer.c
@@ -175,19 +175,13 @@
static void __init sirfsoc_clockevent_init(void)
{
- clockevents_calc_mult_shift(&sirfsoc_clockevent, CLOCK_TICK_RATE, 60);
-
- sirfsoc_clockevent.max_delta_ns =
- clockevent_delta2ns(-2, &sirfsoc_clockevent);
- sirfsoc_clockevent.min_delta_ns =
- clockevent_delta2ns(2, &sirfsoc_clockevent);
-
sirfsoc_clockevent.cpumask = cpumask_of(0);
- clockevents_register_device(&sirfsoc_clockevent);
+ clockevents_config_and_register(&sirfsoc_clockevent, CLOCK_TICK_RATE,
+ 2, -2);
}
/* initialize the kernel jiffy timer source */
-static void __init sirfsoc_timer_init(void)
+void __init sirfsoc_timer_init(void)
{
unsigned long rate;
struct clk *clk;
@@ -226,7 +220,7 @@
{},
};
-static void __init sirfsoc_of_timer_map(void)
+void __init sirfsoc_of_timer_map(void)
{
struct device_node *np;
const unsigned int *intspec;
@@ -245,7 +239,3 @@
of_node_put(np);
}
-
-struct sys_timer sirfsoc_timer = {
- .init = sirfsoc_timer_init,
-};
diff --git a/arch/arm/mach-pxa/balloon3.c b/arch/arm/mach-pxa/balloon3.c
index 2082293..2f71b3f 100644
--- a/arch/arm/mach-pxa/balloon3.c
+++ b/arch/arm/mach-pxa/balloon3.c
@@ -822,7 +822,7 @@
.nr_irqs = BALLOON3_NR_IRQS,
.init_irq = balloon3_init_irq,
.handle_irq = pxa27x_handle_irq,
- .timer = &pxa_timer,
+ .init_time = pxa_timer_init,
.init_machine = balloon3_init,
.atag_offset = 0x100,
.restart = pxa_restart,
diff --git a/arch/arm/mach-pxa/capc7117.c b/arch/arm/mach-pxa/capc7117.c
index 9a8760b..c092730 100644
--- a/arch/arm/mach-pxa/capc7117.c
+++ b/arch/arm/mach-pxa/capc7117.c
@@ -153,7 +153,7 @@
.nr_irqs = PXA_NR_IRQS,
.init_irq = pxa3xx_init_irq,
.handle_irq = pxa3xx_handle_irq,
- .timer = &pxa_timer,
+ .init_time = pxa_timer_init,
.init_machine = capc7117_init,
.restart = pxa_restart,
MACHINE_END
diff --git a/arch/arm/mach-pxa/cm-x2xx.c b/arch/arm/mach-pxa/cm-x2xx.c
index a103c8f..bb99f59 100644
--- a/arch/arm/mach-pxa/cm-x2xx.c
+++ b/arch/arm/mach-pxa/cm-x2xx.c
@@ -520,7 +520,7 @@
.init_irq = cmx2xx_init_irq,
/* NOTE: pxa25x_handle_irq() works on PXA27x w/o camera support */
.handle_irq = pxa25x_handle_irq,
- .timer = &pxa_timer,
+ .init_time = pxa_timer_init,
.init_machine = cmx2xx_init,
#ifdef CONFIG_PCI
.dma_zone_size = SZ_64M,
diff --git a/arch/arm/mach-pxa/cm-x300.c b/arch/arm/mach-pxa/cm-x300.c
index cc2b23a..8091aac 100644
--- a/arch/arm/mach-pxa/cm-x300.c
+++ b/arch/arm/mach-pxa/cm-x300.c
@@ -854,7 +854,7 @@
.nr_irqs = PXA_NR_IRQS,
.init_irq = pxa3xx_init_irq,
.handle_irq = pxa3xx_handle_irq,
- .timer = &pxa_timer,
+ .init_time = pxa_timer_init,
.init_machine = cm_x300_init,
.fixup = cm_x300_fixup,
.restart = pxa_restart,
diff --git a/arch/arm/mach-pxa/colibri-pxa270.c b/arch/arm/mach-pxa/colibri-pxa270.c
index b2f227d..5f9d930 100644
--- a/arch/arm/mach-pxa/colibri-pxa270.c
+++ b/arch/arm/mach-pxa/colibri-pxa270.c
@@ -313,7 +313,7 @@
.nr_irqs = PXA_NR_IRQS,
.init_irq = pxa27x_init_irq,
.handle_irq = pxa27x_handle_irq,
- .timer = &pxa_timer,
+ .init_time = pxa_timer_init,
.restart = pxa_restart,
MACHINE_END
@@ -324,7 +324,7 @@
.nr_irqs = PXA_NR_IRQS,
.init_irq = pxa27x_init_irq,
.handle_irq = pxa27x_handle_irq,
- .timer = &pxa_timer,
+ .init_time = pxa_timer_init,
.restart = pxa_restart,
MACHINE_END
diff --git a/arch/arm/mach-pxa/colibri-pxa300.c b/arch/arm/mach-pxa/colibri-pxa300.c
index a9c9c16..f1a1ac1 100644
--- a/arch/arm/mach-pxa/colibri-pxa300.c
+++ b/arch/arm/mach-pxa/colibri-pxa300.c
@@ -189,7 +189,7 @@
.nr_irqs = PXA_NR_IRQS,
.init_irq = pxa3xx_init_irq,
.handle_irq = pxa3xx_handle_irq,
- .timer = &pxa_timer,
+ .init_time = pxa_timer_init,
.restart = pxa_restart,
MACHINE_END
diff --git a/arch/arm/mach-pxa/colibri-pxa320.c b/arch/arm/mach-pxa/colibri-pxa320.c
index 25515cd..f6cc8b0 100644
--- a/arch/arm/mach-pxa/colibri-pxa320.c
+++ b/arch/arm/mach-pxa/colibri-pxa320.c
@@ -259,7 +259,7 @@
.nr_irqs = PXA_NR_IRQS,
.init_irq = pxa3xx_init_irq,
.handle_irq = pxa3xx_handle_irq,
- .timer = &pxa_timer,
+ .init_time = pxa_timer_init,
.restart = pxa_restart,
MACHINE_END
diff --git a/arch/arm/mach-pxa/corgi.c b/arch/arm/mach-pxa/corgi.c
index 7c83f52..a5b8fead 100644
--- a/arch/arm/mach-pxa/corgi.c
+++ b/arch/arm/mach-pxa/corgi.c
@@ -733,7 +733,7 @@
.init_irq = pxa25x_init_irq,
.handle_irq = pxa25x_handle_irq,
.init_machine = corgi_init,
- .timer = &pxa_timer,
+ .init_time = pxa_timer_init,
.restart = corgi_restart,
MACHINE_END
#endif
@@ -746,7 +746,7 @@
.init_irq = pxa25x_init_irq,
.handle_irq = pxa25x_handle_irq,
.init_machine = corgi_init,
- .timer = &pxa_timer,
+ .init_time = pxa_timer_init,
.restart = corgi_restart,
MACHINE_END
#endif
@@ -759,7 +759,7 @@
.init_irq = pxa25x_init_irq,
.handle_irq = pxa25x_handle_irq,
.init_machine = corgi_init,
- .timer = &pxa_timer,
+ .init_time = pxa_timer_init,
.restart = corgi_restart,
MACHINE_END
#endif
diff --git a/arch/arm/mach-pxa/csb726.c b/arch/arm/mach-pxa/csb726.c
index 7039f44..fadfff8 100644
--- a/arch/arm/mach-pxa/csb726.c
+++ b/arch/arm/mach-pxa/csb726.c
@@ -278,6 +278,6 @@
.init_irq = pxa27x_init_irq,
.handle_irq = pxa27x_handle_irq,
.init_machine = csb726_init,
- .timer = &pxa_timer,
+ .init_time = pxa_timer_init,
.restart = pxa_restart,
MACHINE_END
diff --git a/arch/arm/mach-pxa/em-x270.c b/arch/arm/mach-pxa/em-x270.c
index 1b64114..446563a 100644
--- a/arch/arm/mach-pxa/em-x270.c
+++ b/arch/arm/mach-pxa/em-x270.c
@@ -1298,7 +1298,7 @@
.nr_irqs = PXA_NR_IRQS,
.init_irq = pxa27x_init_irq,
.handle_irq = pxa27x_handle_irq,
- .timer = &pxa_timer,
+ .init_time = pxa_timer_init,
.init_machine = em_x270_init,
.restart = pxa_restart,
MACHINE_END
@@ -1309,7 +1309,7 @@
.nr_irqs = PXA_NR_IRQS,
.init_irq = pxa27x_init_irq,
.handle_irq = pxa27x_handle_irq,
- .timer = &pxa_timer,
+ .init_time = pxa_timer_init,
.init_machine = em_x270_init,
.restart = pxa_restart,
MACHINE_END
diff --git a/arch/arm/mach-pxa/eseries.c b/arch/arm/mach-pxa/eseries.c
index be2ee9b..8280ebc 100644
--- a/arch/arm/mach-pxa/eseries.c
+++ b/arch/arm/mach-pxa/eseries.c
@@ -195,7 +195,7 @@
.handle_irq = pxa25x_handle_irq,
.fixup = eseries_fixup,
.init_machine = e330_init,
- .timer = &pxa_timer,
+ .init_time = pxa_timer_init,
.restart = pxa_restart,
MACHINE_END
#endif
@@ -246,7 +246,7 @@
.handle_irq = pxa25x_handle_irq,
.fixup = eseries_fixup,
.init_machine = e350_init,
- .timer = &pxa_timer,
+ .init_time = pxa_timer_init,
.restart = pxa_restart,
MACHINE_END
#endif
@@ -370,7 +370,7 @@
.handle_irq = pxa25x_handle_irq,
.fixup = eseries_fixup,
.init_machine = e400_init,
- .timer = &pxa_timer,
+ .init_time = pxa_timer_init,
.restart = pxa_restart,
MACHINE_END
#endif
@@ -566,7 +566,7 @@
.handle_irq = pxa25x_handle_irq,
.fixup = eseries_fixup,
.init_machine = e740_init,
- .timer = &pxa_timer,
+ .init_time = pxa_timer_init,
.restart = pxa_restart,
MACHINE_END
#endif
@@ -765,7 +765,7 @@
.handle_irq = pxa25x_handle_irq,
.fixup = eseries_fixup,
.init_machine = e750_init,
- .timer = &pxa_timer,
+ .init_time = pxa_timer_init,
.restart = pxa_restart,
MACHINE_END
#endif
@@ -977,7 +977,7 @@
.handle_irq = pxa25x_handle_irq,
.fixup = eseries_fixup,
.init_machine = e800_init,
- .timer = &pxa_timer,
+ .init_time = pxa_timer_init,
.restart = pxa_restart,
MACHINE_END
#endif
diff --git a/arch/arm/mach-pxa/ezx.c b/arch/arm/mach-pxa/ezx.c
index dc58fa0..dca1070 100644
--- a/arch/arm/mach-pxa/ezx.c
+++ b/arch/arm/mach-pxa/ezx.c
@@ -802,7 +802,7 @@
.nr_irqs = EZX_NR_IRQS,
.init_irq = pxa27x_init_irq,
.handle_irq = pxa27x_handle_irq,
- .timer = &pxa_timer,
+ .init_time = pxa_timer_init,
.init_machine = a780_init,
.restart = pxa_restart,
MACHINE_END
@@ -869,7 +869,7 @@
.nr_irqs = EZX_NR_IRQS,
.init_irq = pxa27x_init_irq,
.handle_irq = pxa27x_handle_irq,
- .timer = &pxa_timer,
+ .init_time = pxa_timer_init,
.init_machine = e680_init,
.restart = pxa_restart,
MACHINE_END
@@ -936,7 +936,7 @@
.nr_irqs = EZX_NR_IRQS,
.init_irq = pxa27x_init_irq,
.handle_irq = pxa27x_handle_irq,
- .timer = &pxa_timer,
+ .init_time = pxa_timer_init,
.init_machine = a1200_init,
.restart = pxa_restart,
MACHINE_END
@@ -1128,7 +1128,7 @@
.nr_irqs = EZX_NR_IRQS,
.init_irq = pxa27x_init_irq,
.handle_irq = pxa27x_handle_irq,
- .timer = &pxa_timer,
+ .init_time = pxa_timer_init,
.init_machine = a910_init,
.restart = pxa_restart,
MACHINE_END
@@ -1195,7 +1195,7 @@
.nr_irqs = EZX_NR_IRQS,
.init_irq = pxa27x_init_irq,
.handle_irq = pxa27x_handle_irq,
- .timer = &pxa_timer,
+ .init_time = pxa_timer_init,
.init_machine = e6_init,
.restart = pxa_restart,
MACHINE_END
@@ -1236,7 +1236,7 @@
.nr_irqs = EZX_NR_IRQS,
.init_irq = pxa27x_init_irq,
.handle_irq = pxa27x_handle_irq,
- .timer = &pxa_timer,
+ .init_time = pxa_timer_init,
.init_machine = e2_init,
.restart = pxa_restart,
MACHINE_END
diff --git a/arch/arm/mach-pxa/generic.h b/arch/arm/mach-pxa/generic.h
index 42d5cca..fd7ea39 100644
--- a/arch/arm/mach-pxa/generic.h
+++ b/arch/arm/mach-pxa/generic.h
@@ -10,9 +10,8 @@
*/
struct irq_data;
-struct sys_timer;
-extern struct sys_timer pxa_timer;
+extern void pxa_timer_init(void);
extern void __init pxa_map_io(void);
diff --git a/arch/arm/mach-pxa/gumstix.c b/arch/arm/mach-pxa/gumstix.c
index 60755a6..00b92da 100644
--- a/arch/arm/mach-pxa/gumstix.c
+++ b/arch/arm/mach-pxa/gumstix.c
@@ -238,7 +238,7 @@
.nr_irqs = PXA_NR_IRQS,
.init_irq = pxa25x_init_irq,
.handle_irq = pxa25x_handle_irq,
- .timer = &pxa_timer,
+ .init_time = pxa_timer_init,
.init_machine = gumstix_init,
.restart = pxa_restart,
MACHINE_END
diff --git a/arch/arm/mach-pxa/h5000.c b/arch/arm/mach-pxa/h5000.c
index e7dec58..875ec33 100644
--- a/arch/arm/mach-pxa/h5000.c
+++ b/arch/arm/mach-pxa/h5000.c
@@ -208,7 +208,7 @@
.nr_irqs = PXA_NR_IRQS,
.init_irq = pxa25x_init_irq,
.handle_irq = pxa25x_handle_irq,
- .timer = &pxa_timer,
+ .init_time = pxa_timer_init,
.init_machine = h5000_init,
.restart = pxa_restart,
MACHINE_END
diff --git a/arch/arm/mach-pxa/himalaya.c b/arch/arm/mach-pxa/himalaya.c
index 2962de8..7a8d749 100644
--- a/arch/arm/mach-pxa/himalaya.c
+++ b/arch/arm/mach-pxa/himalaya.c
@@ -164,6 +164,6 @@
.init_irq = pxa25x_init_irq,
.handle_irq = pxa25x_handle_irq,
.init_machine = himalaya_init,
- .timer = &pxa_timer,
+ .init_time = pxa_timer_init,
.restart = pxa_restart,
MACHINE_END
diff --git a/arch/arm/mach-pxa/hx4700.c b/arch/arm/mach-pxa/hx4700.c
index e2c6391..133109e 100644
--- a/arch/arm/mach-pxa/hx4700.c
+++ b/arch/arm/mach-pxa/hx4700.c
@@ -900,6 +900,6 @@
.init_irq = pxa27x_init_irq,
.handle_irq = pxa27x_handle_irq,
.init_machine = hx4700_init,
- .timer = &pxa_timer,
+ .init_time = pxa_timer_init,
.restart = pxa_restart,
MACHINE_END
diff --git a/arch/arm/mach-pxa/icontrol.c b/arch/arm/mach-pxa/icontrol.c
index 1d02eab..fe31bfc 100644
--- a/arch/arm/mach-pxa/icontrol.c
+++ b/arch/arm/mach-pxa/icontrol.c
@@ -196,7 +196,7 @@
.nr_irqs = PXA_NR_IRQS,
.init_irq = pxa3xx_init_irq,
.handle_irq = pxa3xx_handle_irq,
- .timer = &pxa_timer,
+ .init_time = pxa_timer_init,
.init_machine = icontrol_init,
.restart = pxa_restart,
MACHINE_END
diff --git a/arch/arm/mach-pxa/idp.c b/arch/arm/mach-pxa/idp.c
index 64507cd..343c4e3 100644
--- a/arch/arm/mach-pxa/idp.c
+++ b/arch/arm/mach-pxa/idp.c
@@ -279,7 +279,7 @@
.nr_irqs = PXA_NR_IRQS,
.init_irq = pxa25x_init_irq,
.handle_irq = pxa25x_handle_irq,
- .timer = &pxa_timer,
+ .init_time = pxa_timer_init,
.init_machine = idp_init,
.restart = pxa_restart,
MACHINE_END
diff --git a/arch/arm/mach-pxa/include/mach/uncompress.h b/arch/arm/mach-pxa/include/mach/uncompress.h
index 5519a34..8c27757 100644
--- a/arch/arm/mach-pxa/include/mach/uncompress.h
+++ b/arch/arm/mach-pxa/include/mach/uncompress.h
@@ -72,8 +72,3 @@
uart_is_pxa = 0;
}
}
-
-/*
- * nothing to do
- */
-#define arch_decomp_wdog()
diff --git a/arch/arm/mach-pxa/littleton.c b/arch/arm/mach-pxa/littleton.c
index 402874f..e848c46 100644
--- a/arch/arm/mach-pxa/littleton.c
+++ b/arch/arm/mach-pxa/littleton.c
@@ -443,7 +443,7 @@
.nr_irqs = LITTLETON_NR_IRQS,
.init_irq = pxa3xx_init_irq,
.handle_irq = pxa3xx_handle_irq,
- .timer = &pxa_timer,
+ .init_time = pxa_timer_init,
.init_machine = littleton_init,
.restart = pxa_restart,
MACHINE_END
diff --git a/arch/arm/mach-pxa/lpd270.c b/arch/arm/mach-pxa/lpd270.c
index 1a63eaa..1255ee0 100644
--- a/arch/arm/mach-pxa/lpd270.c
+++ b/arch/arm/mach-pxa/lpd270.c
@@ -503,7 +503,7 @@
.nr_irqs = LPD270_NR_IRQS,
.init_irq = lpd270_init_irq,
.handle_irq = pxa27x_handle_irq,
- .timer = &pxa_timer,
+ .init_time = pxa_timer_init,
.init_machine = lpd270_init,
.restart = pxa_restart,
MACHINE_END
diff --git a/arch/arm/mach-pxa/lubbock.c b/arch/arm/mach-pxa/lubbock.c
index 553056d..d8a1be6 100644
--- a/arch/arm/mach-pxa/lubbock.c
+++ b/arch/arm/mach-pxa/lubbock.c
@@ -650,7 +650,7 @@
.nr_irqs = LUBBOCK_NR_IRQS,
.init_irq = lubbock_init_irq,
.handle_irq = pxa25x_handle_irq,
- .timer = &pxa_timer,
+ .init_time = pxa_timer_init,
.init_machine = lubbock_init,
.restart = pxa_restart,
MACHINE_END
diff --git a/arch/arm/mach-pxa/magician.c b/arch/arm/mach-pxa/magician.c
index f792240..f44532f 100644
--- a/arch/arm/mach-pxa/magician.c
+++ b/arch/arm/mach-pxa/magician.c
@@ -774,6 +774,6 @@
.init_irq = pxa27x_init_irq,
.handle_irq = pxa27x_handle_irq,
.init_machine = magician_init,
- .timer = &pxa_timer,
+ .init_time = pxa_timer_init,
.restart = pxa_restart,
MACHINE_END
diff --git a/arch/arm/mach-pxa/mainstone.c b/arch/arm/mach-pxa/mainstone.c
index f27a61e..7a12c1b 100644
--- a/arch/arm/mach-pxa/mainstone.c
+++ b/arch/arm/mach-pxa/mainstone.c
@@ -714,7 +714,7 @@
.nr_irqs = MAINSTONE_NR_IRQS,
.init_irq = mainstone_init_irq,
.handle_irq = pxa27x_handle_irq,
- .timer = &pxa_timer,
+ .init_time = pxa_timer_init,
.init_machine = mainstone_init,
.restart = pxa_restart,
MACHINE_END
diff --git a/arch/arm/mach-pxa/mioa701.c b/arch/arm/mach-pxa/mioa701.c
index 2831308..f8979b94 100644
--- a/arch/arm/mach-pxa/mioa701.c
+++ b/arch/arm/mach-pxa/mioa701.c
@@ -762,6 +762,6 @@
.init_irq = &pxa27x_init_irq,
.handle_irq = &pxa27x_handle_irq,
.init_machine = mioa701_machine_init,
- .timer = &pxa_timer,
+ .init_time = pxa_timer_init,
.restart = mioa701_restart,
MACHINE_END
diff --git a/arch/arm/mach-pxa/mp900.c b/arch/arm/mach-pxa/mp900.c
index 152efbf..854f1f5 100644
--- a/arch/arm/mach-pxa/mp900.c
+++ b/arch/arm/mach-pxa/mp900.c
@@ -93,7 +93,7 @@
/* Maintainer - Michael Petchkovsky <mkpetch@internode.on.net> */
MACHINE_START(NEC_MP900, "MobilePro900/C")
.atag_offset = 0x220100,
- .timer = &pxa_timer,
+ .init_time = pxa_timer_init,
.map_io = pxa25x_map_io,
.nr_irqs = PXA_NR_IRQS,
.init_irq = pxa25x_init_irq,
diff --git a/arch/arm/mach-pxa/palmld.c b/arch/arm/mach-pxa/palmld.c
index 8bcc96e..909b713 100644
--- a/arch/arm/mach-pxa/palmld.c
+++ b/arch/arm/mach-pxa/palmld.c
@@ -347,7 +347,7 @@
.nr_irqs = PXA_NR_IRQS,
.init_irq = pxa27x_init_irq,
.handle_irq = pxa27x_handle_irq,
- .timer = &pxa_timer,
+ .init_time = pxa_timer_init,
.init_machine = palmld_init,
.restart = pxa_restart,
MACHINE_END
diff --git a/arch/arm/mach-pxa/palmt5.c b/arch/arm/mach-pxa/palmt5.c
index 5ca7b90..5033fd0 100644
--- a/arch/arm/mach-pxa/palmt5.c
+++ b/arch/arm/mach-pxa/palmt5.c
@@ -208,7 +208,7 @@
.nr_irqs = PXA_NR_IRQS,
.init_irq = pxa27x_init_irq,
.handle_irq = pxa27x_handle_irq,
- .timer = &pxa_timer,
+ .init_time = pxa_timer_init,
.init_machine = palmt5_init,
.restart = pxa_restart,
MACHINE_END
diff --git a/arch/arm/mach-pxa/palmtc.c b/arch/arm/mach-pxa/palmtc.c
index ca924cf..100b176f 100644
--- a/arch/arm/mach-pxa/palmtc.c
+++ b/arch/arm/mach-pxa/palmtc.c
@@ -542,7 +542,7 @@
.nr_irqs = PXA_NR_IRQS,
.init_irq = pxa25x_init_irq,
.handle_irq = pxa25x_handle_irq,
- .timer = &pxa_timer,
+ .init_time = pxa_timer_init,
.init_machine = palmtc_init,
.restart = pxa_restart,
MACHINE_END
diff --git a/arch/arm/mach-pxa/palmte2.c b/arch/arm/mach-pxa/palmte2.c
index 32e0d79..0742721 100644
--- a/arch/arm/mach-pxa/palmte2.c
+++ b/arch/arm/mach-pxa/palmte2.c
@@ -363,7 +363,7 @@
.nr_irqs = PXA_NR_IRQS,
.init_irq = pxa25x_init_irq,
.handle_irq = pxa25x_handle_irq,
- .timer = &pxa_timer,
+ .init_time = pxa_timer_init,
.init_machine = palmte2_init,
.restart = pxa_restart,
MACHINE_END
diff --git a/arch/arm/mach-pxa/palmtreo.c b/arch/arm/mach-pxa/palmtreo.c
index 5775128..a29849d 100644
--- a/arch/arm/mach-pxa/palmtreo.c
+++ b/arch/arm/mach-pxa/palmtreo.c
@@ -501,7 +501,7 @@
.nr_irqs = PXA_NR_IRQS,
.init_irq = pxa27x_init_irq,
.handle_irq = pxa27x_handle_irq,
- .timer = &pxa_timer,
+ .init_time = pxa_timer_init,
.init_machine = treo680_init,
.restart = pxa_restart,
MACHINE_END
@@ -515,7 +515,7 @@
.nr_irqs = PXA_NR_IRQS,
.init_irq = pxa27x_init_irq,
.handle_irq = pxa27x_handle_irq,
- .timer = &pxa_timer,
+ .init_time = pxa_timer_init,
.init_machine = centro_init,
.restart = pxa_restart,
MACHINE_END
diff --git a/arch/arm/mach-pxa/palmtx.c b/arch/arm/mach-pxa/palmtx.c
index 8b43666..627c93a 100644
--- a/arch/arm/mach-pxa/palmtx.c
+++ b/arch/arm/mach-pxa/palmtx.c
@@ -366,7 +366,7 @@
.nr_irqs = PXA_NR_IRQS,
.init_irq = pxa27x_init_irq,
.handle_irq = pxa27x_handle_irq,
- .timer = &pxa_timer,
+ .init_time = pxa_timer_init,
.init_machine = palmtx_init,
.restart = pxa_restart,
MACHINE_END
diff --git a/arch/arm/mach-pxa/palmz72.c b/arch/arm/mach-pxa/palmz72.c
index 8cdd4f5..18b7fcd 100644
--- a/arch/arm/mach-pxa/palmz72.c
+++ b/arch/arm/mach-pxa/palmz72.c
@@ -404,7 +404,7 @@
.nr_irqs = PXA_NR_IRQS,
.init_irq = pxa27x_init_irq,
.handle_irq = pxa27x_handle_irq,
- .timer = &pxa_timer,
+ .init_time = pxa_timer_init,
.init_machine = palmz72_init,
.restart = pxa_restart,
MACHINE_END
diff --git a/arch/arm/mach-pxa/pcm027.c b/arch/arm/mach-pxa/pcm027.c
index fe90544..69918c7 100644
--- a/arch/arm/mach-pxa/pcm027.c
+++ b/arch/arm/mach-pxa/pcm027.c
@@ -263,7 +263,7 @@
.nr_irqs = PCM027_NR_IRQS,
.init_irq = pxa27x_init_irq,
.handle_irq = pxa27x_handle_irq,
- .timer = &pxa_timer,
+ .init_time = pxa_timer_init,
.init_machine = pcm027_init,
.restart = pxa_restart,
MACHINE_END
diff --git a/arch/arm/mach-pxa/poodle.c b/arch/arm/mach-pxa/poodle.c
index 2910bb9..50ccd5f 100644
--- a/arch/arm/mach-pxa/poodle.c
+++ b/arch/arm/mach-pxa/poodle.c
@@ -469,7 +469,7 @@
.nr_irqs = POODLE_NR_IRQS, /* 4 for LoCoMo */
.init_irq = pxa25x_init_irq,
.handle_irq = pxa25x_handle_irq,
- .timer = &pxa_timer,
+ .init_time = pxa_timer_init,
.init_machine = poodle_init,
.restart = pxa_restart,
MACHINE_END
diff --git a/arch/arm/mach-pxa/pxa-dt.c b/arch/arm/mach-pxa/pxa-dt.c
index c9192ce..3835979 100644
--- a/arch/arm/mach-pxa/pxa-dt.c
+++ b/arch/arm/mach-pxa/pxa-dt.c
@@ -55,7 +55,7 @@
.map_io = pxa3xx_map_io,
.init_irq = pxa3xx_dt_init_irq,
.handle_irq = pxa3xx_handle_irq,
- .timer = &pxa_timer,
+ .init_time = pxa_timer_init,
.restart = pxa_restart,
.init_machine = pxa3xx_dt_init,
.dt_compat = pxa3xx_dt_board_compat,
diff --git a/arch/arm/mach-pxa/raumfeld.c b/arch/arm/mach-pxa/raumfeld.c
index 25b08bfa..af41888 100644
--- a/arch/arm/mach-pxa/raumfeld.c
+++ b/arch/arm/mach-pxa/raumfeld.c
@@ -1095,7 +1095,7 @@
.nr_irqs = PXA_NR_IRQS,
.init_irq = pxa3xx_init_irq,
.handle_irq = pxa3xx_handle_irq,
- .timer = &pxa_timer,
+ .init_time = pxa_timer_init,
.restart = pxa_restart,
MACHINE_END
#endif
@@ -1108,7 +1108,7 @@
.nr_irqs = PXA_NR_IRQS,
.init_irq = pxa3xx_init_irq,
.handle_irq = pxa3xx_handle_irq,
- .timer = &pxa_timer,
+ .init_time = pxa_timer_init,
.restart = pxa_restart,
MACHINE_END
#endif
@@ -1121,7 +1121,7 @@
.nr_irqs = PXA_NR_IRQS,
.init_irq = pxa3xx_init_irq,
.handle_irq = pxa3xx_handle_irq,
- .timer = &pxa_timer,
+ .init_time = pxa_timer_init,
.restart = pxa_restart,
MACHINE_END
#endif
diff --git a/arch/arm/mach-pxa/saar.c b/arch/arm/mach-pxa/saar.c
index 08d87a5..710c493 100644
--- a/arch/arm/mach-pxa/saar.c
+++ b/arch/arm/mach-pxa/saar.c
@@ -601,7 +601,7 @@
.nr_irqs = PXA_NR_IRQS,
.init_irq = pxa3xx_init_irq,
.handle_irq = pxa3xx_handle_irq,
- .timer = &pxa_timer,
+ .init_time = pxa_timer_init,
.init_machine = saar_init,
.restart = pxa_restart,
MACHINE_END
diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c
index 7e2cb88..362726c 100644
--- a/arch/arm/mach-pxa/spitz.c
+++ b/arch/arm/mach-pxa/spitz.c
@@ -986,7 +986,7 @@
.init_irq = pxa27x_init_irq,
.handle_irq = pxa27x_handle_irq,
.init_machine = spitz_init,
- .timer = &pxa_timer,
+ .init_time = pxa_timer_init,
.restart = spitz_restart,
MACHINE_END
#endif
@@ -1000,7 +1000,7 @@
.init_irq = pxa27x_init_irq,
.handle_irq = pxa27x_handle_irq,
.init_machine = spitz_init,
- .timer = &pxa_timer,
+ .init_time = pxa_timer_init,
.restart = spitz_restart,
MACHINE_END
#endif
@@ -1014,7 +1014,7 @@
.init_irq = pxa27x_init_irq,
.handle_irq = pxa27x_handle_irq,
.init_machine = spitz_init,
- .timer = &pxa_timer,
+ .init_time = pxa_timer_init,
.restart = spitz_restart,
MACHINE_END
#endif
diff --git a/arch/arm/mach-pxa/stargate2.c b/arch/arm/mach-pxa/stargate2.c
index 456560b..88fde43 100644
--- a/arch/arm/mach-pxa/stargate2.c
+++ b/arch/arm/mach-pxa/stargate2.c
@@ -1006,7 +1006,7 @@
.nr_irqs = PXA_NR_IRQS,
.init_irq = pxa27x_init_irq,
.handle_irq = pxa27x_handle_irq,
- .timer = &pxa_timer,
+ .init_time = pxa_timer_init,
.init_machine = imote2_init,
.atag_offset = 0x100,
.restart = pxa_restart,
@@ -1019,7 +1019,7 @@
.nr_irqs = STARGATE_NR_IRQS,
.init_irq = pxa27x_init_irq,
.handle_irq = pxa27x_handle_irq,
- .timer = &pxa_timer,
+ .init_time = pxa_timer_init,
.init_machine = stargate2_init,
.atag_offset = 0x100,
.restart = pxa_restart,
diff --git a/arch/arm/mach-pxa/tavorevb.c b/arch/arm/mach-pxa/tavorevb.c
index 1a25f8a..f55979c 100644
--- a/arch/arm/mach-pxa/tavorevb.c
+++ b/arch/arm/mach-pxa/tavorevb.c
@@ -494,7 +494,7 @@
.nr_irqs = PXA_NR_IRQS,
.init_irq = pxa3xx_init_irq,
.handle_irq = pxa3xx_handle_irq,
- .timer = &pxa_timer,
+ .init_time = pxa_timer_init,
.init_machine = tavorevb_init,
.restart = pxa_restart,
MACHINE_END
diff --git a/arch/arm/mach-pxa/time.c b/arch/arm/mach-pxa/time.c
index 4bc47d6..8f1ee92 100644
--- a/arch/arm/mach-pxa/time.c
+++ b/arch/arm/mach-pxa/time.c
@@ -89,48 +89,10 @@
}
}
-static struct clock_event_device ckevt_pxa_osmr0 = {
- .name = "osmr0",
- .features = CLOCK_EVT_FEAT_ONESHOT,
- .rating = 200,
- .set_next_event = pxa_osmr0_set_next_event,
- .set_mode = pxa_osmr0_set_mode,
-};
-
-static struct irqaction pxa_ost0_irq = {
- .name = "ost0",
- .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
- .handler = pxa_ost0_interrupt,
- .dev_id = &ckevt_pxa_osmr0,
-};
-
-static void __init pxa_timer_init(void)
-{
- unsigned long clock_tick_rate = get_clock_tick_rate();
-
- writel_relaxed(0, OIER);
- writel_relaxed(OSSR_M0 | OSSR_M1 | OSSR_M2 | OSSR_M3, OSSR);
-
- setup_sched_clock(pxa_read_sched_clock, 32, clock_tick_rate);
-
- clockevents_calc_mult_shift(&ckevt_pxa_osmr0, clock_tick_rate, 4);
- ckevt_pxa_osmr0.max_delta_ns =
- clockevent_delta2ns(0x7fffffff, &ckevt_pxa_osmr0);
- ckevt_pxa_osmr0.min_delta_ns =
- clockevent_delta2ns(MIN_OSCR_DELTA * 2, &ckevt_pxa_osmr0) + 1;
- ckevt_pxa_osmr0.cpumask = cpumask_of(0);
-
- setup_irq(IRQ_OST0, &pxa_ost0_irq);
-
- clocksource_mmio_init(OSCR, "oscr0", clock_tick_rate, 200, 32,
- clocksource_mmio_readl_up);
- clockevents_register_device(&ckevt_pxa_osmr0);
-}
-
#ifdef CONFIG_PM
static unsigned long osmr[4], oier, oscr;
-static void pxa_timer_suspend(void)
+static void pxa_timer_suspend(struct clock_event_device *cedev)
{
osmr[0] = readl_relaxed(OSMR0);
osmr[1] = readl_relaxed(OSMR1);
@@ -140,7 +102,7 @@
oscr = readl_relaxed(OSCR);
}
-static void pxa_timer_resume(void)
+static void pxa_timer_resume(struct clock_event_device *cedev)
{
/*
* Ensure that we have at least MIN_OSCR_DELTA between match
@@ -163,8 +125,38 @@
#define pxa_timer_resume NULL
#endif
-struct sys_timer pxa_timer = {
- .init = pxa_timer_init,
+static struct clock_event_device ckevt_pxa_osmr0 = {
+ .name = "osmr0",
+ .features = CLOCK_EVT_FEAT_ONESHOT,
+ .rating = 200,
+ .set_next_event = pxa_osmr0_set_next_event,
+ .set_mode = pxa_osmr0_set_mode,
.suspend = pxa_timer_suspend,
.resume = pxa_timer_resume,
};
+
+static struct irqaction pxa_ost0_irq = {
+ .name = "ost0",
+ .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
+ .handler = pxa_ost0_interrupt,
+ .dev_id = &ckevt_pxa_osmr0,
+};
+
+void __init pxa_timer_init(void)
+{
+ unsigned long clock_tick_rate = get_clock_tick_rate();
+
+ writel_relaxed(0, OIER);
+ writel_relaxed(OSSR_M0 | OSSR_M1 | OSSR_M2 | OSSR_M3, OSSR);
+
+ setup_sched_clock(pxa_read_sched_clock, 32, clock_tick_rate);
+
+ ckevt_pxa_osmr0.cpumask = cpumask_of(0);
+
+ setup_irq(IRQ_OST0, &pxa_ost0_irq);
+
+ clocksource_mmio_init(OSCR, "oscr0", clock_tick_rate, 200, 32,
+ clocksource_mmio_readl_up);
+ clockevents_config_and_register(&ckevt_pxa_osmr0, clock_tick_rate,
+ MIN_OSCR_DELTA * 2, 0x7fffffff);
+}
diff --git a/arch/arm/mach-pxa/tosa.c b/arch/arm/mach-pxa/tosa.c
index 233629e..9e7998d 100644
--- a/arch/arm/mach-pxa/tosa.c
+++ b/arch/arm/mach-pxa/tosa.c
@@ -982,6 +982,6 @@
.init_irq = pxa25x_init_irq,
.handle_irq = pxa25x_handle_irq,
.init_machine = tosa_init,
- .timer = &pxa_timer,
+ .init_time = pxa_timer_init,
.restart = tosa_restart,
MACHINE_END
diff --git a/arch/arm/mach-pxa/trizeps4.c b/arch/arm/mach-pxa/trizeps4.c
index fbbcbed..c580434 100644
--- a/arch/arm/mach-pxa/trizeps4.c
+++ b/arch/arm/mach-pxa/trizeps4.c
@@ -561,7 +561,7 @@
.nr_irqs = PXA_NR_IRQS,
.init_irq = pxa27x_init_irq,
.handle_irq = pxa27x_handle_irq,
- .timer = &pxa_timer,
+ .init_time = pxa_timer_init,
.restart = pxa_restart,
MACHINE_END
@@ -573,6 +573,6 @@
.nr_irqs = PXA_NR_IRQS,
.init_irq = pxa27x_init_irq,
.handle_irq = pxa27x_handle_irq,
- .timer = &pxa_timer,
+ .init_time = pxa_timer_init,
.restart = pxa_restart,
MACHINE_END
diff --git a/arch/arm/mach-pxa/viper.c b/arch/arm/mach-pxa/viper.c
index c773e4d..9c363c0 100644
--- a/arch/arm/mach-pxa/viper.c
+++ b/arch/arm/mach-pxa/viper.c
@@ -997,7 +997,7 @@
.nr_irqs = PXA_NR_IRQS,
.init_irq = viper_init_irq,
.handle_irq = pxa25x_handle_irq,
- .timer = &pxa_timer,
+ .init_time = pxa_timer_init,
.init_machine = viper_init,
.restart = pxa_restart,
MACHINE_END
diff --git a/arch/arm/mach-pxa/vpac270.c b/arch/arm/mach-pxa/vpac270.c
index 491b6c9..aa89488 100644
--- a/arch/arm/mach-pxa/vpac270.c
+++ b/arch/arm/mach-pxa/vpac270.c
@@ -719,7 +719,7 @@
.nr_irqs = PXA_NR_IRQS,
.init_irq = pxa27x_init_irq,
.handle_irq = pxa27x_handle_irq,
- .timer = &pxa_timer,
+ .init_time = pxa_timer_init,
.init_machine = vpac270_init,
.restart = pxa_restart,
MACHINE_END
diff --git a/arch/arm/mach-pxa/xcep.c b/arch/arm/mach-pxa/xcep.c
index 4275713..13b1d45 100644
--- a/arch/arm/mach-pxa/xcep.c
+++ b/arch/arm/mach-pxa/xcep.c
@@ -185,7 +185,7 @@
.nr_irqs = PXA_NR_IRQS,
.init_irq = pxa25x_init_irq,
.handle_irq = pxa25x_handle_irq,
- .timer = &pxa_timer,
+ .init_time = pxa_timer_init,
.restart = pxa_restart,
MACHINE_END
diff --git a/arch/arm/mach-pxa/z2.c b/arch/arm/mach-pxa/z2.c
index 97529fa..989903a 100644
--- a/arch/arm/mach-pxa/z2.c
+++ b/arch/arm/mach-pxa/z2.c
@@ -722,7 +722,7 @@
.nr_irqs = PXA_NR_IRQS,
.init_irq = pxa27x_init_irq,
.handle_irq = pxa27x_handle_irq,
- .timer = &pxa_timer,
+ .init_time = pxa_timer_init,
.init_machine = z2_init,
.restart = pxa_restart,
MACHINE_END
diff --git a/arch/arm/mach-pxa/zeus.c b/arch/arm/mach-pxa/zeus.c
index abd3aa1..f5d4364 100644
--- a/arch/arm/mach-pxa/zeus.c
+++ b/arch/arm/mach-pxa/zeus.c
@@ -910,7 +910,7 @@
.nr_irqs = ZEUS_NR_IRQS,
.init_irq = zeus_init_irq,
.handle_irq = pxa27x_handle_irq,
- .timer = &pxa_timer,
+ .init_time = pxa_timer_init,
.init_machine = zeus_init,
.restart = pxa_restart,
MACHINE_END
diff --git a/arch/arm/mach-pxa/zylonite.c b/arch/arm/mach-pxa/zylonite.c
index 226279f..1f00d65 100644
--- a/arch/arm/mach-pxa/zylonite.c
+++ b/arch/arm/mach-pxa/zylonite.c
@@ -428,7 +428,7 @@
.nr_irqs = ZYLONITE_NR_IRQS,
.init_irq = pxa3xx_init_irq,
.handle_irq = pxa3xx_handle_irq,
- .timer = &pxa_timer,
+ .init_time = pxa_timer_init,
.init_machine = zylonite_init,
.restart = pxa_restart,
MACHINE_END
diff --git a/arch/arm/mach-realview/core.c b/arch/arm/mach-realview/core.c
index 6824674..1d5ee5c 100644
--- a/arch/arm/mach-realview/core.c
+++ b/arch/arm/mach-realview/core.c
@@ -42,7 +42,6 @@
#include <asm/mach/irq.h>
#include <asm/mach/map.h>
-#include <asm/hardware/gic.h>
#include <mach/platform.h>
#include <mach/irqs.h>
diff --git a/arch/arm/mach-realview/include/mach/uncompress.h b/arch/arm/mach-realview/include/mach/uncompress.h
index 8305037..cfa30d2 100644
--- a/arch/arm/mach-realview/include/mach/uncompress.h
+++ b/arch/arm/mach-realview/include/mach/uncompress.h
@@ -75,4 +75,3 @@
* nothing to do
*/
#define arch_decomp_setup()
-#define arch_decomp_wdog()
diff --git a/arch/arm/mach-realview/platsmp.c b/arch/arm/mach-realview/platsmp.c
index 300f706..98e3052 100644
--- a/arch/arm/mach-realview/platsmp.c
+++ b/arch/arm/mach-realview/platsmp.c
@@ -14,7 +14,6 @@
#include <linux/io.h>
#include <mach/hardware.h>
-#include <asm/hardware/gic.h>
#include <asm/mach-types.h>
#include <asm/smp_scu.h>
@@ -59,8 +58,6 @@
for (i = 0; i < ncores; i++)
set_cpu_possible(i, true);
-
- set_smp_cross_call(gic_raise_softirq);
}
static void __init realview_smp_prepare_cpus(unsigned int max_cpus)
diff --git a/arch/arm/mach-realview/realview_eb.c b/arch/arm/mach-realview/realview_eb.c
index 28511d4..5b1c8bf 100644
--- a/arch/arm/mach-realview/realview_eb.c
+++ b/arch/arm/mach-realview/realview_eb.c
@@ -27,13 +27,13 @@
#include <linux/amba/mmci.h>
#include <linux/amba/pl022.h>
#include <linux/io.h>
+#include <linux/irqchip/arm-gic.h>
#include <linux/platform_data/clk-realview.h>
#include <mach/hardware.h>
#include <asm/irq.h>
#include <asm/mach-types.h>
#include <asm/pgtable.h>
-#include <asm/hardware/gic.h>
#include <asm/hardware/cache-l2x0.h>
#include <asm/smp_twd.h>
@@ -418,10 +418,6 @@
realview_eb_twd_init();
}
-static struct sys_timer realview_eb_timer = {
- .init = realview_eb_timer_init,
-};
-
static void realview_eb_restart(char mode, const char *cmd)
{
void __iomem *reset_ctrl = __io_address(REALVIEW_SYS_RESETCTL);
@@ -472,8 +468,7 @@
.map_io = realview_eb_map_io,
.init_early = realview_init_early,
.init_irq = gic_init_irq,
- .timer = &realview_eb_timer,
- .handle_irq = gic_handle_irq,
+ .init_time = realview_eb_timer_init,
.init_machine = realview_eb_init,
#ifdef CONFIG_ZONE_DMA
.dma_zone_size = SZ_256M,
diff --git a/arch/arm/mach-realview/realview_pb1176.c b/arch/arm/mach-realview/realview_pb1176.c
index 07d6672..d5e83a1 100644
--- a/arch/arm/mach-realview/realview_pb1176.c
+++ b/arch/arm/mach-realview/realview_pb1176.c
@@ -29,13 +29,13 @@
#include <linux/mtd/physmap.h>
#include <linux/mtd/partitions.h>
#include <linux/io.h>
+#include <linux/irqchip/arm-gic.h>
#include <linux/platform_data/clk-realview.h>
#include <mach/hardware.h>
#include <asm/irq.h>
#include <asm/mach-types.h>
#include <asm/pgtable.h>
-#include <asm/hardware/gic.h>
#include <asm/hardware/cache-l2x0.h>
#include <asm/mach/arch.h>
@@ -329,10 +329,6 @@
realview_timer_init(IRQ_DC1176_TIMER0);
}
-static struct sys_timer realview_pb1176_timer = {
- .init = realview_pb1176_timer_init,
-};
-
static void realview_pb1176_restart(char mode, const char *cmd)
{
void __iomem *reset_ctrl = __io_address(REALVIEW_SYS_RESETCTL);
@@ -384,8 +380,7 @@
.map_io = realview_pb1176_map_io,
.init_early = realview_init_early,
.init_irq = gic_init_irq,
- .timer = &realview_pb1176_timer,
- .handle_irq = gic_handle_irq,
+ .init_time = realview_pb1176_timer_init,
.init_machine = realview_pb1176_init,
#ifdef CONFIG_ZONE_DMA
.dma_zone_size = SZ_256M,
diff --git a/arch/arm/mach-realview/realview_pb11mp.c b/arch/arm/mach-realview/realview_pb11mp.c
index 7ed53d7..c3cfe21 100644
--- a/arch/arm/mach-realview/realview_pb11mp.c
+++ b/arch/arm/mach-realview/realview_pb11mp.c
@@ -27,13 +27,13 @@
#include <linux/amba/mmci.h>
#include <linux/amba/pl022.h>
#include <linux/io.h>
+#include <linux/irqchip/arm-gic.h>
#include <linux/platform_data/clk-realview.h>
#include <mach/hardware.h>
#include <asm/irq.h>
#include <asm/mach-types.h>
#include <asm/pgtable.h>
-#include <asm/hardware/gic.h>
#include <asm/hardware/cache-l2x0.h>
#include <asm/smp_twd.h>
@@ -316,10 +316,6 @@
realview_pb11mp_twd_init();
}
-static struct sys_timer realview_pb11mp_timer = {
- .init = realview_pb11mp_timer_init,
-};
-
static void realview_pb11mp_restart(char mode, const char *cmd)
{
void __iomem *reset_ctrl = __io_address(REALVIEW_SYS_RESETCTL);
@@ -367,8 +363,7 @@
.map_io = realview_pb11mp_map_io,
.init_early = realview_init_early,
.init_irq = gic_init_irq,
- .timer = &realview_pb11mp_timer,
- .handle_irq = gic_handle_irq,
+ .init_time = realview_pb11mp_timer_init,
.init_machine = realview_pb11mp_init,
#ifdef CONFIG_ZONE_DMA
.dma_zone_size = SZ_256M,
diff --git a/arch/arm/mach-realview/realview_pba8.c b/arch/arm/mach-realview/realview_pba8.c
index 9992431..dde652a 100644
--- a/arch/arm/mach-realview/realview_pba8.c
+++ b/arch/arm/mach-realview/realview_pba8.c
@@ -27,12 +27,12 @@
#include <linux/amba/mmci.h>
#include <linux/amba/pl022.h>
#include <linux/io.h>
+#include <linux/irqchip/arm-gic.h>
#include <linux/platform_data/clk-realview.h>
#include <asm/irq.h>
#include <asm/mach-types.h>
#include <asm/pgtable.h>
-#include <asm/hardware/gic.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
@@ -264,10 +264,6 @@
realview_timer_init(IRQ_PBA8_TIMER0_1);
}
-static struct sys_timer realview_pba8_timer = {
- .init = realview_pba8_timer_init,
-};
-
static void realview_pba8_restart(char mode, const char *cmd)
{
void __iomem *reset_ctrl = __io_address(REALVIEW_SYS_RESETCTL);
@@ -308,8 +304,7 @@
.map_io = realview_pba8_map_io,
.init_early = realview_init_early,
.init_irq = gic_init_irq,
- .timer = &realview_pba8_timer,
- .handle_irq = gic_handle_irq,
+ .init_time = realview_pba8_timer_init,
.init_machine = realview_pba8_init,
#ifdef CONFIG_ZONE_DMA
.dma_zone_size = SZ_256M,
diff --git a/arch/arm/mach-realview/realview_pbx.c b/arch/arm/mach-realview/realview_pbx.c
index 4f486f0..54f0185 100644
--- a/arch/arm/mach-realview/realview_pbx.c
+++ b/arch/arm/mach-realview/realview_pbx.c
@@ -26,13 +26,13 @@
#include <linux/amba/mmci.h>
#include <linux/amba/pl022.h>
#include <linux/io.h>
+#include <linux/irqchip/arm-gic.h>
#include <linux/platform_data/clk-realview.h>
#include <asm/irq.h>
#include <asm/mach-types.h>
#include <asm/smp_twd.h>
#include <asm/pgtable.h>
-#include <asm/hardware/gic.h>
#include <asm/hardware/cache-l2x0.h>
#include <asm/mach/arch.h>
@@ -324,10 +324,6 @@
realview_pbx_twd_init();
}
-static struct sys_timer realview_pbx_timer = {
- .init = realview_pbx_timer_init,
-};
-
static void realview_pbx_fixup(struct tag *tags, char **from,
struct meminfo *meminfo)
{
@@ -404,8 +400,7 @@
.map_io = realview_pbx_map_io,
.init_early = realview_init_early,
.init_irq = gic_init_irq,
- .timer = &realview_pbx_timer,
- .handle_irq = gic_handle_irq,
+ .init_time = realview_pbx_timer_init,
.init_machine = realview_pbx_init,
#ifdef CONFIG_ZONE_DMA
.dma_zone_size = SZ_256M,
diff --git a/arch/arm/mach-rpc/include/mach/uncompress.h b/arch/arm/mach-rpc/include/mach/uncompress.h
index 9cd9bcd..0fd4b0b 100644
--- a/arch/arm/mach-rpc/include/mach/uncompress.h
+++ b/arch/arm/mach-rpc/include/mach/uncompress.h
@@ -189,8 +189,3 @@
if (nr_pages * page_size < 4096*1024) error("<4M of mem\n");
}
#endif
-
-/*
- * nothing to do
- */
-#define arch_decomp_wdog()
diff --git a/arch/arm/mach-rpc/riscpc.c b/arch/arm/mach-rpc/riscpc.c
index f3fa259c..a302cf5 100644
--- a/arch/arm/mach-rpc/riscpc.c
+++ b/arch/arm/mach-rpc/riscpc.c
@@ -211,7 +211,7 @@
soft_restart(0);
}
-extern struct sys_timer ioc_timer;
+void ioc_timer_init(void);
MACHINE_START(RISCPC, "Acorn-RiscPC")
/* Maintainer: Russell King */
@@ -220,6 +220,6 @@
.reserve_lp1 = 1,
.map_io = rpc_map_io,
.init_irq = rpc_init_irq,
- .timer = &ioc_timer,
+ .init_time = ioc_timer_init,
.restart = rpc_restart,
MACHINE_END
diff --git a/arch/arm/mach-rpc/time.c b/arch/arm/mach-rpc/time.c
index 581fca9..9a6def1 100644
--- a/arch/arm/mach-rpc/time.c
+++ b/arch/arm/mach-rpc/time.c
@@ -24,7 +24,7 @@
#include <asm/mach/time.h>
-unsigned long ioc_timer_gettimeoffset(void)
+static u32 ioc_timer_gettimeoffset(void)
{
unsigned int count1, count2, status;
long offset;
@@ -56,7 +56,7 @@
}
offset = (LATCH - offset) * (tick_nsec / 1000);
- return (offset + LATCH/2) / LATCH;
+ return ((offset + LATCH/2) / LATCH) * 1000;
}
void __init ioctime_init(void)
@@ -82,14 +82,9 @@
/*
* Set up timer interrupt.
*/
-static void __init ioc_timer_init(void)
+void __init ioc_timer_init(void)
{
+ arch_gettimeoffset = ioc_timer_gettimeoffset;
ioctime_init();
setup_irq(IRQ_TIMER0, &ioc_timer_irq);
}
-
-struct sys_timer ioc_timer = {
- .init = ioc_timer_init,
- .offset = ioc_timer_gettimeoffset,
-};
-
diff --git a/arch/arm/mach-s3c2410/Kconfig b/arch/arm/mach-s3c2410/Kconfig
deleted file mode 100644
index 68d89cb..0000000
--- a/arch/arm/mach-s3c2410/Kconfig
+++ /dev/null
@@ -1,20 +0,0 @@
-# Copyright 2007 Simtec Electronics
-#
-# Licensed under GPLv2
-
-# cpu frequency scaling support
-
-config S3C2410_CPUFREQ
- bool
- depends on CPU_FREQ_S3C24XX && CPU_S3C2410
- select S3C2410_CPUFREQ_UTILS
- help
- CPU Frequency scaling support for S3C2410
-
-config S3C2410_PLLTABLE
- bool
- depends on S3C2410_CPUFREQ && CPU_FREQ_S3C24XX_PLL
- default y
- help
- Select the PLL table for the S3C2410
-
diff --git a/arch/arm/mach-s3c2410/Makefile b/arch/arm/mach-s3c2410/Makefile
deleted file mode 100644
index 6b9a316..0000000
--- a/arch/arm/mach-s3c2410/Makefile
+++ /dev/null
@@ -1,14 +0,0 @@
-# arch/arm/mach-s3c2410/Makefile
-#
-# Copyright 2007 Simtec Electronics
-#
-# Licensed under GPLv2
-
-obj-y :=
-obj-m :=
-obj-n :=
-obj- :=
-
-obj-$(CONFIG_S3C2410_CPUFREQ) += cpu-freq.o
-obj-$(CONFIG_S3C2410_PLLTABLE) += pll.o
-
diff --git a/arch/arm/mach-s3c2412/Kconfig b/arch/arm/mach-s3c2412/Kconfig
deleted file mode 100644
index 495f692..0000000
--- a/arch/arm/mach-s3c2412/Kconfig
+++ /dev/null
@@ -1,13 +0,0 @@
-# Copyright 2007 Simtec Electronics
-#
-# Licensed under GPLv2
-
-# Note, the S3C2412 IOtiming support is in plat-s3c24xx
-
-config S3C2412_CPUFREQ
- bool
- depends on CPU_FREQ_S3C24XX && CPU_S3C2412
- default y
- select S3C2412_IOTIMING
- help
- CPU Frequency scaling support for S3C2412 and S3C2413 SoC CPUs.
diff --git a/arch/arm/mach-s3c2412/Makefile b/arch/arm/mach-s3c2412/Makefile
deleted file mode 100644
index 41a6c27..0000000
--- a/arch/arm/mach-s3c2412/Makefile
+++ /dev/null
@@ -1,12 +0,0 @@
-# arch/arm/mach-s3c2412/Makefile
-#
-# Copyright 2007 Simtec Electronics
-#
-# Licensed under GPLv2
-
-obj-y :=
-obj-m :=
-obj-n :=
-obj- :=
-
-obj-$(CONFIG_S3C2412_CPUFREQ) += cpu-freq.o
diff --git a/arch/arm/mach-s3c2412/gpio.c b/arch/arm/mach-s3c2412/gpio.c
deleted file mode 100644
index 4526f6b..0000000
--- a/arch/arm/mach-s3c2412/gpio.c
+++ /dev/null
@@ -1,62 +0,0 @@
-/* linux/arch/arm/mach-s3c2412/gpio.c
- *
- * Copyright (c) 2007 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- *
- * http://armlinux.simtec.co.uk/.
- *
- * S3C2412/S3C2413 specific GPIO support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/module.h>
-#include <linux/interrupt.h>
-#include <linux/gpio.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-#include <mach/regs-gpio.h>
-#include <mach/hardware.h>
-
-#include <plat/gpio-core.h>
-
-int s3c2412_gpio_set_sleepcfg(unsigned int pin, unsigned int state)
-{
- struct samsung_gpio_chip *chip = samsung_gpiolib_getchip(pin);
- unsigned long offs = pin - chip->chip.base;
- unsigned long flags;
- unsigned long slpcon;
-
- offs *= 2;
-
- if (pin < S3C2410_GPB(0))
- return -EINVAL;
-
- if (pin >= S3C2410_GPF(0) &&
- pin <= S3C2410_GPG(16))
- return -EINVAL;
-
- if (pin > S3C2410_GPH(16))
- return -EINVAL;
-
- local_irq_save(flags);
-
- slpcon = __raw_readl(chip->base + 0x0C);
-
- slpcon &= ~(3 << offs);
- slpcon |= state << offs;
-
- __raw_writel(slpcon, chip->base + 0x0C);
-
- local_irq_restore(flags);
-
- return 0;
-}
-
-EXPORT_SYMBOL(s3c2412_gpio_set_sleepcfg);
diff --git a/arch/arm/mach-s3c2440/Kconfig b/arch/arm/mach-s3c2440/Kconfig
deleted file mode 100644
index a4d7fd2..0000000
--- a/arch/arm/mach-s3c2440/Kconfig
+++ /dev/null
@@ -1,37 +0,0 @@
-# Copyright 2007 Simtec Electronics
-#
-# Licensed under GPLv2
-
-config S3C2440_CPUFREQ
- bool "S3C2440/S3C2442 CPU Frequency scaling support"
- depends on CPU_FREQ_S3C24XX && (CPU_S3C2440 || CPU_S3C2442)
- default y
- select S3C2410_CPUFREQ_UTILS
- help
- CPU Frequency scaling support for S3C2440 and S3C2442 SoC CPUs.
-
-config S3C2440_XTAL_12000000
- bool
- help
- Indicate that the build needs to support 12MHz system
- crystal.
-
-config S3C2440_XTAL_16934400
- bool
- help
- Indicate that the build needs to support 16.9344MHz system
- crystal.
-
-config S3C2440_PLL_12000000
- bool
- depends on S3C2440_CPUFREQ && S3C2440_XTAL_12000000
- default y if CPU_FREQ_S3C24XX_PLL
- help
- PLL tables for S3C2440 or S3C2442 CPUs with 12MHz crystals.
-
-config S3C2440_PLL_16934400
- bool
- depends on S3C2440_CPUFREQ && S3C2440_XTAL_16934400
- default y if CPU_FREQ_S3C24XX_PLL
- help
- PLL tables for S3C2440 or S3C2442 CPUs with 16.934MHz crystals.
diff --git a/arch/arm/mach-s3c2440/Makefile b/arch/arm/mach-s3c2440/Makefile
deleted file mode 100644
index c460924..0000000
--- a/arch/arm/mach-s3c2440/Makefile
+++ /dev/null
@@ -1,17 +0,0 @@
-# arch/arm/mach-s3c2440/Makefile
-#
-# Copyright 2007 Simtec Electronics
-#
-# Licensed under GPLv2
-
-obj-y :=
-obj-m :=
-obj-n :=
-obj- :=
-
-obj-$(CONFIG_CPU_S3C2440) += dsc.o
-
-obj-$(CONFIG_S3C2440_CPUFREQ) += s3c2440-cpufreq.o
-
-obj-$(CONFIG_S3C2440_PLL_12000000) += s3c2440-pll-12000000.o
-obj-$(CONFIG_S3C2440_PLL_16934400) += s3c2440-pll-16934400.o
diff --git a/arch/arm/mach-s3c2440/dsc.c b/arch/arm/mach-s3c2440/dsc.c
deleted file mode 100644
index 9ea66e3..0000000
--- a/arch/arm/mach-s3c2440/dsc.c
+++ /dev/null
@@ -1,54 +0,0 @@
-/* linux/arch/arm/mach-s3c2440/dsc.c
- *
- * Copyright (c) 2004-2005 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- *
- * Samsung S3C2440 Drive Strength Control support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/io.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <mach/hardware.h>
-#include <asm/irq.h>
-
-#include <mach/regs-gpio.h>
-#include <mach/regs-dsc.h>
-
-#include <plat/cpu.h>
-#include <plat/s3c244x.h>
-
-int s3c2440_set_dsc(unsigned int pin, unsigned int value)
-{
- void __iomem *base;
- unsigned long val;
- unsigned long flags;
- unsigned long mask;
-
- base = (pin & S3C2440_SELECT_DSC1) ? S3C2440_DSC1 : S3C2440_DSC0;
- mask = 3 << S3C2440_DSC_GETSHIFT(pin);
-
- local_irq_save(flags);
-
- val = __raw_readl(base);
- val &= ~mask;
- val |= value & mask;
- __raw_writel(val, base);
-
- local_irq_restore(flags);
- return 0;
-}
-
-EXPORT_SYMBOL(s3c2440_set_dsc);
diff --git a/arch/arm/mach-s3c24xx/Kconfig b/arch/arm/mach-s3c24xx/Kconfig
index 7079a70..37f513d 100644
--- a/arch/arm/mach-s3c24xx/Kconfig
+++ b/arch/arm/mach-s3c24xx/Kconfig
@@ -9,6 +9,15 @@
if ARCH_S3C24XX
+config PLAT_S3C24XX
+ def_bool y
+ select ARCH_REQUIRE_GPIOLIB
+ select NO_IOPORT
+ select S3C_DEV_NAND
+ select IRQ_DOMAIN
+ help
+ Base platform code for any Samsung S3C24XX device
+
menu "SAMSUNG S3C24XX SoCs Support"
comment "S3C24XX SoCs"
@@ -83,6 +92,17 @@
# common code
+config S3C2410_CLOCK
+ bool
+ help
+ Clock code for the S3C2410, and similar processors which
+ is currently includes the S3C2410, S3C2440, S3C2442.
+
+config S3C24XX_DCLK
+ bool
+ help
+ Clock code for supporting DCLK/CLKOUT on S3C24XX architectures
+
config S3C24XX_SMDK
bool
help
@@ -111,6 +131,22 @@
help
Compile in platform device definition for Samsung TouchScreen.
+config S3C24XX_DMA
+ bool "S3C2410 DMA support"
+ depends on ARCH_S3C24XX
+ select S3C_DMA
+ help
+ S3C2410 DMA support. This is needed for drivers like sound which
+ use the S3C2410's DMA system to move data to and from the
+ peripheral blocks.
+
+config S3C2410_DMA_DEBUG
+ bool "S3C2410 DMA support debug"
+ depends on ARCH_S3C24XX && S3C2410_DMA
+ help
+ Enable debugging output for the DMA code. This option sends info
+ to the kernel log, at priority KERN_DEBUG.
+
config S3C2410_DMA
bool
depends on S3C24XX_DMA && (CPU_S3C2410 || CPU_S3C2442)
@@ -123,10 +159,92 @@
help
Power Management code common to S3C2410 and better
+# low-level serial option nodes
+
+config CPU_LLSERIAL_S3C2410_ONLY
+ bool
+ default y if CPU_LLSERIAL_S3C2410 && !CPU_LLSERIAL_S3C2440
+
+config CPU_LLSERIAL_S3C2440_ONLY
+ bool
+ default y if CPU_LLSERIAL_S3C2440 && !CPU_LLSERIAL_S3C2410
+
+config CPU_LLSERIAL_S3C2410
+ bool
+ help
+ Selected if there is an S3C2410 (or register compatible) serial
+ low-level implementation needed
+
+config CPU_LLSERIAL_S3C2440
+ bool
+ help
+ Selected if there is an S3C2440 (or register compatible) serial
+ low-level implementation needed
+
+# gpio configurations
+
+config S3C24XX_GPIO_EXTRA
+ int
+ default 128 if S3C24XX_GPIO_EXTRA128
+ default 64 if S3C24XX_GPIO_EXTRA64
+ default 16 if ARCH_H1940
+ default 0
+
+config S3C24XX_GPIO_EXTRA64
+ bool
+ help
+ Add an extra 64 gpio numbers to the available GPIO pool. This is
+ available for boards that need extra gpios for external devices.
+
+config S3C24XX_GPIO_EXTRA128
+ bool
+ help
+ Add an extra 128 gpio numbers to the available GPIO pool. This is
+ available for boards that need extra gpios for external devices.
+
+# cpu frequency items common between s3c2410 and s3c2440/s3c2442
+
+config S3C2410_IOTIMING
+ bool
+ depends on CPU_FREQ_S3C24XX
+ help
+ Internal node to select io timing code that is common to the s3c2410
+ and s3c2440/s3c2442 cpu frequency support.
+
+config S3C2410_CPUFREQ_UTILS
+ bool
+ depends on CPU_FREQ_S3C24XX
+ help
+ Internal node to select timing code that is common to the s3c2410
+ and s3c2440/s3c244 cpu frequency support.
+
+# cpu frequency support common to s3c2412, s3c2413 and s3c2442
+
+config S3C2412_IOTIMING
+ bool
+ depends on CPU_FREQ_S3C24XX && (CPU_S3C2412 || CPU_S3C2443)
+ help
+ Intel node to select io timing code that is common to the s3c2412
+ and the s3c2443.
+
# cpu-specific sections
if CPU_S3C2410
+config S3C2410_CPUFREQ
+ bool
+ depends on CPU_FREQ_S3C24XX && CPU_S3C2410
+ select S3C2410_CPUFREQ_UTILS
+ help
+ CPU Frequency scaling support for S3C2410
+
+config S3C2410_PLL
+ bool
+ depends on S3C2410_CPUFREQ && CPU_FREQ_S3C24XX_PLL
+ default y
+ help
+ Select the PLL table for the S3C2410
+
config S3C24XX_SIMTEC_NOR
bool
help
@@ -267,6 +385,14 @@
!CPU_S3C2443 && CPU_S3C2412
default y
+config S3C2412_CPUFREQ
+ bool
+ depends on CPU_FREQ_S3C24XX && CPU_S3C2412
+ default y
+ select S3C2412_IOTIMING
+ help
+ CPU Frequency scaling support for S3C2412 and S3C2413 SoC CPUs.
+
config S3C2412_DMA
bool
help
@@ -367,11 +493,45 @@
if CPU_S3C2440
+config S3C2440_CPUFREQ
+ bool "S3C2440/S3C2442 CPU Frequency scaling support"
+ depends on CPU_FREQ_S3C24XX && (CPU_S3C2440 || CPU_S3C2442)
+ default y
+ select S3C2410_CPUFREQ_UTILS
+ help
+ CPU Frequency scaling support for S3C2440 and S3C2442 SoC CPUs.
+
config S3C2440_DMA
bool
help
Support for S3C2440 specific DMA code5A
+config S3C2440_XTAL_12000000
+ bool
+ help
+ Indicate that the build needs to support 12MHz system
+ crystal.
+
+config S3C2440_XTAL_16934400
+ bool
+ help
+ Indicate that the build needs to support 16.9344MHz system
+ crystal.
+
+config S3C2440_PLL_12000000
+ bool
+ depends on S3C2440_CPUFREQ && S3C2440_XTAL_12000000
+ default y if CPU_FREQ_S3C24XX_PLL
+ help
+ PLL tables for S3C2440 or S3C2442 CPUs with 12MHz crystals.
+
+config S3C2440_PLL_16934400
+ bool
+ depends on S3C2440_CPUFREQ && S3C2440_XTAL_16934400
+ default y if CPU_FREQ_S3C24XX_PLL
+ help
+ PLL tables for S3C2440 or S3C2442 CPUs with 16.934MHz crystals.
+
comment "S3C2440 Boards"
#
diff --git a/arch/arm/mach-s3c24xx/Makefile b/arch/arm/mach-s3c24xx/Makefile
index 0ab6ab1..af53d27 100644
--- a/arch/arm/mach-s3c24xx/Makefile
+++ b/arch/arm/mach-s3c24xx/Makefile
@@ -14,26 +14,32 @@
# core
-obj-y += common.o
+obj-y += common.o irq.o
obj-$(CONFIG_CPU_S3C2410) += s3c2410.o
+obj-$(CONFIG_S3C2410_CPUFREQ) += cpufreq-s3c2410.o
obj-$(CONFIG_S3C2410_DMA) += dma-s3c2410.o
+obj-$(CONFIG_S3C2410_PLL) += pll-s3c2410.o
obj-$(CONFIG_S3C2410_PM) += pm-s3c2410.o sleep-s3c2410.o
obj-$(CONFIG_CPU_S3C2412) += s3c2412.o irq-s3c2412.o clock-s3c2412.o
+obj-$(CONFIG_S3C2412_CPUFREQ) += cpufreq-s3c2412.o
obj-$(CONFIG_S3C2412_DMA) += dma-s3c2412.o
obj-$(CONFIG_S3C2412_PM) += pm-s3c2412.o
obj-$(CONFIG_S3C2412_PM_SLEEP) += sleep-s3c2412.o
-obj-$(CONFIG_CPU_S3C2416) += s3c2416.o irq-s3c2416.o clock-s3c2416.o
+obj-$(CONFIG_CPU_S3C2416) += s3c2416.o clock-s3c2416.o
obj-$(CONFIG_S3C2416_PM) += pm-s3c2416.o
obj-$(CONFIG_CPU_S3C2440) += s3c2440.o irq-s3c2440.o clock-s3c2440.o
obj-$(CONFIG_CPU_S3C2442) += s3c2442.o
obj-$(CONFIG_CPU_S3C244X) += s3c244x.o irq-s3c244x.o clock-s3c244x.o
+obj-$(CONFIG_S3C2440_CPUFREQ) += cpufreq-s3c2440.o
obj-$(CONFIG_S3C2440_DMA) += dma-s3c2440.o
+obj-$(CONFIG_S3C2440_PLL_12000000) += pll-s3c2440-12000000.o
+obj-$(CONFIG_S3C2440_PLL_16934400) += pll-s3c2440-16934400.o
-obj-$(CONFIG_CPU_S3C2443) += s3c2443.o irq-s3c2443.o clock-s3c2443.o
+obj-$(CONFIG_CPU_S3C2443) += s3c2443.o clock-s3c2443.o
# PM
@@ -41,9 +47,21 @@
# common code
+obj-$(CONFIG_S3C24XX_DCLK) += clock-dclk.o
+obj-$(CONFIG_S3C24XX_DMA) += dma.o
+
+obj-$(CONFIG_S3C2410_CLOCK) += clock-s3c2410.o
+obj-$(CONFIG_S3C2410_CPUFREQ_UTILS) += cpufreq-utils.o
+
+obj-$(CONFIG_S3C2410_IOTIMING) += iotiming-s3c2410.o
+obj-$(CONFIG_S3C2412_IOTIMING) += iotiming-s3c2412.o
+
obj-$(CONFIG_S3C2443_COMMON) += common-s3c2443.o
obj-$(CONFIG_S3C2443_DMA) += dma-s3c2443.o
+obj-$(CONFIG_CPU_FREQ_S3C24XX) += cpufreq.o
+obj-$(CONFIG_CPU_FREQ_S3C24XX_DEBUGFS) += cpufreq-debugfs.o
+
#
# machine support
# following is ordered alphabetically by option text.
diff --git a/arch/arm/mach-s3c24xx/anubis.h b/arch/arm/mach-s3c24xx/anubis.h
new file mode 100644
index 0000000..2691665
--- /dev/null
+++ b/arch/arm/mach-s3c24xx/anubis.h
@@ -0,0 +1,53 @@
+/*
+ * Copyright (c) 2005 Simtec Electronics
+ * http://www.simtec.co.uk/products/
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * ANUBIS - CPLD control constants
+ * ANUBIS - IRQ Number definitions
+ * ANUBIS - Memory map definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __MACH_S3C24XX_ANUBIS_H
+#define __MACH_S3C24XX_ANUBIS_H __FILE__
+
+/* CTRL2 - NAND WP control, IDE Reset assert/check */
+
+#define ANUBIS_CTRL1_NANDSEL (0x3)
+
+/* IDREG - revision */
+
+#define ANUBIS_IDREG_REVMASK (0x7)
+
+/* irq */
+
+#define ANUBIS_IRQ_IDE0 IRQ_EINT2
+#define ANUBIS_IRQ_IDE1 IRQ_EINT3
+#define ANUBIS_IRQ_ASIX IRQ_EINT1
+
+/* map */
+
+/* start peripherals off after the S3C2410 */
+
+#define ANUBIS_IOADDR(x) (S3C2410_ADDR((x) + 0x01800000))
+
+#define ANUBIS_PA_CPLD (S3C2410_CS1 | (1<<26))
+
+/* we put the CPLD registers next, to get them out of the way */
+
+#define ANUBIS_VA_CTRL1 ANUBIS_IOADDR(0x00000000)
+#define ANUBIS_PA_CTRL1 ANUBIS_PA_CPLD
+
+#define ANUBIS_VA_IDREG ANUBIS_IOADDR(0x00300000)
+#define ANUBIS_PA_IDREG (ANUBIS_PA_CPLD + (3 << 23))
+
+#define ANUBIS_IDEPRI ANUBIS_IOADDR(0x01000000)
+#define ANUBIS_IDEPRIAUX ANUBIS_IOADDR(0x01100000)
+#define ANUBIS_IDESEC ANUBIS_IOADDR(0x01200000)
+#define ANUBIS_IDESECAUX ANUBIS_IOADDR(0x01300000)
+
+#endif /* __MACH_S3C24XX_ANUBIS_H */
diff --git a/arch/arm/mach-s3c24xx/bast-ide.c b/arch/arm/mach-s3c24xx/bast-ide.c
index ba02cf8..3f0288f 100644
--- a/arch/arm/mach-s3c24xx/bast-ide.c
+++ b/arch/arm/mach-s3c24xx/bast-ide.c
@@ -25,8 +25,8 @@
#include <asm/mach/irq.h>
#include <mach/map.h>
-#include <mach/bast-map.h>
-#include <mach/bast-irq.h>
+
+#include "bast.h"
/* IDE ports */
@@ -34,12 +34,10 @@
.ioport_shift = 5,
};
-#define IDE_CS S3C2410_CS5
-
static struct resource bast_ide0_resource[] = {
- [0] = DEFINE_RES_MEM(IDE_CS + BAST_PA_IDEPRI, 8 * 0x20),
- [1] = DEFINE_RES_MEM(IDE_CS + BAST_PA_IDEPRIAUX + (6 * 0x20), 0x20),
- [2] = DEFINE_RES_IRQ(IRQ_IDE0),
+ [0] = DEFINE_RES_MEM(BAST_IDE_CS + BAST_PA_IDEPRI, 8 * 0x20),
+ [1] = DEFINE_RES_MEM(BAST_IDE_CS + BAST_PA_IDEPRIAUX + (6 * 0x20), 0x20),
+ [2] = DEFINE_RES_IRQ(BAST_IRQ_IDE0),
};
static struct platform_device bast_device_ide0 = {
@@ -55,9 +53,9 @@
};
static struct resource bast_ide1_resource[] = {
- [0] = DEFINE_RES_MEM(IDE_CS + BAST_PA_IDESEC, 8 * 0x20),
- [1] = DEFINE_RES_MEM(IDE_CS + BAST_PA_IDESECAUX + (6 * 0x20), 0x20),
- [2] = DEFINE_RES_IRQ(IRQ_IDE1),
+ [0] = DEFINE_RES_MEM(BAST_IDE_CS + BAST_PA_IDESEC, 8 * 0x20),
+ [1] = DEFINE_RES_MEM(BAST_IDE_CS + BAST_PA_IDESECAUX + (6 * 0x20), 0x20),
+ [2] = DEFINE_RES_IRQ(BAST_IRQ_IDE1),
};
static struct platform_device bast_device_ide1 = {
diff --git a/arch/arm/mach-s3c24xx/bast-irq.c b/arch/arm/mach-s3c24xx/bast-irq.c
index ac7b2ad..c0daa95 100644
--- a/arch/arm/mach-s3c24xx/bast-irq.c
+++ b/arch/arm/mach-s3c24xx/bast-irq.c
@@ -27,27 +27,20 @@
#include <linux/device.h>
#include <linux/io.h>
-#include <asm/mach-types.h>
-
-#include <mach/hardware.h>
#include <asm/irq.h>
-
+#include <asm/mach-types.h>
#include <asm/mach/irq.h>
+#include <mach/hardware.h>
#include <mach/regs-irq.h>
-#include <mach/bast-map.h>
-#include <mach/bast-irq.h>
#include <plat/irq.h>
-#if 0
-#include <asm/debug-ll.h>
-#endif
+#include "bast.h"
#define irqdbf(x...)
#define irqdbf2(x...)
-
/* handle PC104 ISA interrupts from the system CPLD */
/* table of ISA irq nos to the relevant mask... zero means
@@ -87,7 +80,7 @@
static void
bast_pc104_maskack(struct irq_data *data)
{
- struct irq_desc *desc = irq_desc + IRQ_ISA;
+ struct irq_desc *desc = irq_desc + BAST_IRQ_ISA;
bast_pc104_mask(data);
desc->irq_data.chip->irq_ack(&desc->irq_data);
@@ -122,7 +115,7 @@
if (unlikely(stat == 0)) {
/* ack if we get an irq with nothing (ie, startup) */
- desc = irq_desc + IRQ_ISA;
+ desc = irq_desc + BAST_IRQ_ISA;
desc->irq_data.chip->irq_ack(&desc->irq_data);
} else {
/* handle the IRQ */
@@ -147,7 +140,7 @@
__raw_writeb(0x0, BAST_VA_PC104_IRQMASK);
- irq_set_chained_handler(IRQ_ISA, bast_irq_pc104_demux);
+ irq_set_chained_handler(BAST_IRQ_ISA, bast_irq_pc104_demux);
/* register our IRQs */
diff --git a/arch/arm/mach-s3c24xx/bast.h b/arch/arm/mach-s3c24xx/bast.h
new file mode 100644
index 0000000..5c7534b
--- /dev/null
+++ b/arch/arm/mach-s3c24xx/bast.h
@@ -0,0 +1,197 @@
+/*
+ * Copyright (c) 2003-2004 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * BAST - CPLD control constants
+ * BAST - IRQ Number definitions
+ * BAST - Memory map definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __MACH_S3C24XX_BAST_H
+#define __MACH_S3C24XX_BAST_H __FILE__
+
+/* CTRL1 - Audio LR routing */
+
+#define BAST_CPLD_CTRL1_LRCOFF (0x00)
+#define BAST_CPLD_CTRL1_LRCADC (0x01)
+#define BAST_CPLD_CTRL1_LRCDAC (0x02)
+#define BAST_CPLD_CTRL1_LRCARM (0x03)
+#define BAST_CPLD_CTRL1_LRMASK (0x03)
+
+/* CTRL2 - NAND WP control, IDE Reset assert/check */
+
+#define BAST_CPLD_CTRL2_WNAND (0x04)
+#define BAST_CPLD_CTLR2_IDERST (0x08)
+
+/* CTRL3 - rom write control, CPLD identity */
+
+#define BAST_CPLD_CTRL3_IDMASK (0x0e)
+#define BAST_CPLD_CTRL3_ROMWEN (0x01)
+
+/* CTRL4 - 8bit LCD interface control/status */
+
+#define BAST_CPLD_CTRL4_LLAT (0x01)
+#define BAST_CPLD_CTRL4_LCDRW (0x02)
+#define BAST_CPLD_CTRL4_LCDCMD (0x04)
+#define BAST_CPLD_CTRL4_LCDE2 (0x01)
+
+/* CTRL5 - DMA routing */
+
+#define BAST_CPLD_DMA0_PRIIDE (0)
+#define BAST_CPLD_DMA0_SECIDE (1)
+#define BAST_CPLD_DMA0_ISA15 (2)
+#define BAST_CPLD_DMA0_ISA36 (3)
+
+#define BAST_CPLD_DMA1_PRIIDE (0 << 2)
+#define BAST_CPLD_DMA1_SECIDE (1 << 2)
+#define BAST_CPLD_DMA1_ISA15 (2 << 2)
+#define BAST_CPLD_DMA1_ISA36 (3 << 2)
+
+/* irq numbers to onboard peripherals */
+
+#define BAST_IRQ_USBOC IRQ_EINT18
+#define BAST_IRQ_IDE0 IRQ_EINT16
+#define BAST_IRQ_IDE1 IRQ_EINT17
+#define BAST_IRQ_PCSERIAL1 IRQ_EINT15
+#define BAST_IRQ_PCSERIAL2 IRQ_EINT14
+#define BAST_IRQ_PCPARALLEL IRQ_EINT13
+#define BAST_IRQ_ASIX IRQ_EINT11
+#define BAST_IRQ_DM9000 IRQ_EINT10
+#define BAST_IRQ_ISA IRQ_EINT9
+#define BAST_IRQ_SMALERT IRQ_EINT8
+
+/* map */
+
+/*
+ * ok, we've used up to 0x13000000, now we need to find space for the
+ * peripherals that live in the nGCS[x] areas, which are quite numerous
+ * in their space. We also have the board's CPLD to find register space
+ * for.
+ */
+
+#define BAST_IOADDR(x) (S3C2410_ADDR((x) + 0x01300000))
+
+/* we put the CPLD registers next, to get them out of the way */
+
+#define BAST_VA_CTRL1 BAST_IOADDR(0x00000000)
+#define BAST_PA_CTRL1 (S3C2410_CS5 | 0x7800000)
+
+#define BAST_VA_CTRL2 BAST_IOADDR(0x00100000)
+#define BAST_PA_CTRL2 (S3C2410_CS1 | 0x6000000)
+
+#define BAST_VA_CTRL3 BAST_IOADDR(0x00200000)
+#define BAST_PA_CTRL3 (S3C2410_CS1 | 0x6800000)
+
+#define BAST_VA_CTRL4 BAST_IOADDR(0x00300000)
+#define BAST_PA_CTRL4 (S3C2410_CS1 | 0x7000000)
+
+/* next, we have the PC104 ISA interrupt registers */
+
+#define BAST_PA_PC104_IRQREQ (S3C2410_CS5 | 0x6000000)
+#define BAST_VA_PC104_IRQREQ BAST_IOADDR(0x00400000)
+
+#define BAST_PA_PC104_IRQRAW (S3C2410_CS5 | 0x6800000)
+#define BAST_VA_PC104_IRQRAW BAST_IOADDR(0x00500000)
+
+#define BAST_PA_PC104_IRQMASK (S3C2410_CS5 | 0x7000000)
+#define BAST_VA_PC104_IRQMASK BAST_IOADDR(0x00600000)
+
+#define BAST_PA_LCD_RCMD1 (0x8800000)
+#define BAST_VA_LCD_RCMD1 BAST_IOADDR(0x00700000)
+
+#define BAST_PA_LCD_WCMD1 (0x8000000)
+#define BAST_VA_LCD_WCMD1 BAST_IOADDR(0x00800000)
+
+#define BAST_PA_LCD_RDATA1 (0x9800000)
+#define BAST_VA_LCD_RDATA1 BAST_IOADDR(0x00900000)
+
+#define BAST_PA_LCD_WDATA1 (0x9000000)
+#define BAST_VA_LCD_WDATA1 BAST_IOADDR(0x00A00000)
+
+#define BAST_PA_LCD_RCMD2 (0xA800000)
+#define BAST_VA_LCD_RCMD2 BAST_IOADDR(0x00B00000)
+
+#define BAST_PA_LCD_WCMD2 (0xA000000)
+#define BAST_VA_LCD_WCMD2 BAST_IOADDR(0x00C00000)
+
+#define BAST_PA_LCD_RDATA2 (0xB800000)
+#define BAST_VA_LCD_RDATA2 BAST_IOADDR(0x00D00000)
+
+#define BAST_PA_LCD_WDATA2 (0xB000000)
+#define BAST_VA_LCD_WDATA2 BAST_IOADDR(0x00E00000)
+
+
+/*
+ * 0xE0000000 contains the IO space that is split by speed and
+ * whether the access is for 8 or 16bit IO... this ensures that
+ * the correct access is made
+ *
+ * 0x10000000 of space, partitioned as so:
+ *
+ * 0x00000000 to 0x04000000 8bit, slow
+ * 0x04000000 to 0x08000000 16bit, slow
+ * 0x08000000 to 0x0C000000 16bit, net
+ * 0x0C000000 to 0x10000000 16bit, fast
+ *
+ * each of these spaces has the following in:
+ *
+ * 0x00000000 to 0x01000000 16MB ISA IO space
+ * 0x01000000 to 0x02000000 16MB ISA memory space
+ * 0x02000000 to 0x02100000 1MB IDE primary channel
+ * 0x02100000 to 0x02200000 1MB IDE primary channel aux
+ * 0x02200000 to 0x02400000 1MB IDE secondary channel
+ * 0x02300000 to 0x02400000 1MB IDE secondary channel aux
+ * 0x02400000 to 0x02500000 1MB ASIX ethernet controller
+ * 0x02500000 to 0x02600000 1MB Davicom DM9000 ethernet controller
+ * 0x02600000 to 0x02700000 1MB PC SuperIO controller
+ *
+ * the phyiscal layout of the zones are:
+ * nGCS2 - 8bit, slow
+ * nGCS3 - 16bit, slow
+ * nGCS4 - 16bit, net
+ * nGCS5 - 16bit, fast
+ */
+
+#define BAST_VA_MULTISPACE (0xE0000000)
+
+#define BAST_VA_ISAIO (BAST_VA_MULTISPACE + 0x00000000)
+#define BAST_VA_ISAMEM (BAST_VA_MULTISPACE + 0x01000000)
+#define BAST_VA_IDEPRI (BAST_VA_MULTISPACE + 0x02000000)
+#define BAST_VA_IDEPRIAUX (BAST_VA_MULTISPACE + 0x02100000)
+#define BAST_VA_IDESEC (BAST_VA_MULTISPACE + 0x02200000)
+#define BAST_VA_IDESECAUX (BAST_VA_MULTISPACE + 0x02300000)
+#define BAST_VA_ASIXNET (BAST_VA_MULTISPACE + 0x02400000)
+#define BAST_VA_DM9000 (BAST_VA_MULTISPACE + 0x02500000)
+#define BAST_VA_SUPERIO (BAST_VA_MULTISPACE + 0x02600000)
+
+#define BAST_VAM_CS2 (0x00000000)
+#define BAST_VAM_CS3 (0x04000000)
+#define BAST_VAM_CS4 (0x08000000)
+#define BAST_VAM_CS5 (0x0C000000)
+
+/* physical offset addresses for the peripherals */
+
+#define BAST_PA_ISAIO (0x00000000)
+#define BAST_PA_ASIXNET (0x01000000)
+#define BAST_PA_SUPERIO (0x01800000)
+#define BAST_PA_IDEPRI (0x02000000)
+#define BAST_PA_IDEPRIAUX (0x02800000)
+#define BAST_PA_IDESEC (0x03000000)
+#define BAST_PA_IDESECAUX (0x03800000)
+#define BAST_PA_ISAMEM (0x04000000)
+#define BAST_PA_DM9000 (0x05000000)
+
+/* some configurations for the peripherals */
+
+#define BAST_PCSIO (BAST_VA_SUPERIO + BAST_VAM_CS2)
+
+#define BAST_ASIXNET_CS BAST_VAM_CS5
+#define BAST_DM9000_CS BAST_VAM_CS4
+
+#define BAST_IDE_CS S3C2410_CS5
+
+#endif /* __MACH_S3C24XX_BAST_H */
diff --git a/arch/arm/plat-s3c24xx/clock-dclk.c b/arch/arm/mach-s3c24xx/clock-dclk.c
similarity index 98%
rename from arch/arm/plat-s3c24xx/clock-dclk.c
rename to arch/arm/mach-s3c24xx/clock-dclk.c
index f95d326..1edd9b2 100644
--- a/arch/arm/plat-s3c24xx/clock-dclk.c
+++ b/arch/arm/mach-s3c24xx/clock-dclk.c
@@ -1,5 +1,4 @@
-/* linux/arch/arm/plat-s3c24xx/clock-dclk.c
- *
+/*
* Copyright (c) 2004-2008 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
* http://armlinux.simtec.co.uk/
diff --git a/arch/arm/plat-s3c24xx/s3c2410-clock.c b/arch/arm/mach-s3c24xx/clock-s3c2410.c
similarity index 98%
rename from arch/arm/plat-s3c24xx/s3c2410-clock.c
rename to arch/arm/mach-s3c24xx/clock-s3c2410.c
index 25dc4d4..641266f3 100644
--- a/arch/arm/plat-s3c24xx/s3c2410-clock.c
+++ b/arch/arm/mach-s3c24xx/clock-s3c2410.c
@@ -1,5 +1,4 @@
-/* linux/arch/arm/mach-s3c2410/clock.c
- *
+/*
* Copyright (c) 2006 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
*
diff --git a/arch/arm/mach-s3c24xx/common.h b/arch/arm/mach-s3c24xx/common.h
index c2f596e..ed6276f 100644
--- a/arch/arm/mach-s3c24xx/common.h
+++ b/arch/arm/mach-s3c24xx/common.h
@@ -15,4 +15,6 @@
void s3c2410_restart(char mode, const char *cmd);
void s3c244x_restart(char mode, const char *cmd);
+extern struct syscore_ops s3c24xx_irq_syscore_ops;
+
#endif /* __ARCH_ARM_MACH_S3C24XX_COMMON_H */
diff --git a/arch/arm/plat-s3c24xx/cpu-freq-debugfs.c b/arch/arm/mach-s3c24xx/cpufreq-debugfs.c
similarity index 98%
rename from arch/arm/plat-s3c24xx/cpu-freq-debugfs.c
rename to arch/arm/mach-s3c24xx/cpufreq-debugfs.c
index c7adad0..9b7b428 100644
--- a/arch/arm/plat-s3c24xx/cpu-freq-debugfs.c
+++ b/arch/arm/mach-s3c24xx/cpufreq-debugfs.c
@@ -1,5 +1,4 @@
-/* linux/arch/arm/plat-s3c24xx/cpu-freq-debugfs.c
- *
+/*
* Copyright (c) 2009 Simtec Electronics
* http://armlinux.simtec.co.uk/
* Ben Dooks <ben@simtec.co.uk>
diff --git a/arch/arm/mach-s3c2410/cpu-freq.c b/arch/arm/mach-s3c24xx/cpufreq-s3c2410.c
similarity index 97%
rename from arch/arm/mach-s3c2410/cpu-freq.c
rename to arch/arm/mach-s3c24xx/cpufreq-s3c2410.c
index 5404535..cfa0dd8 100644
--- a/arch/arm/mach-s3c2410/cpu-freq.c
+++ b/arch/arm/mach-s3c24xx/cpufreq-s3c2410.c
@@ -1,5 +1,4 @@
-/* linux/arch/arm/mach-s3c2410/cpu-freq.c
- *
+/*
* Copyright (c) 2006-2008 Simtec Electronics
* http://armlinux.simtec.co.uk/
* Ben Dooks <ben@simtec.co.uk>
@@ -81,7 +80,7 @@
cfg->divs.p_divisor = pdiv;
cfg->divs.h_divisor = hdiv;
- return 0 ;
+ return 0;
}
static struct s3c_cpufreq_info s3c2410_cpufreq_info = {
@@ -131,7 +130,6 @@
{
return subsys_interface_register(&s3c2410_cpufreq_interface);
}
-
arch_initcall(s3c2410_cpufreq_init);
static int s3c2410a_cpufreq_add(struct device *dev,
@@ -159,5 +157,4 @@
{
return subsys_interface_register(&s3c2410a_cpufreq_interface);
}
-
arch_initcall(s3c2410a_cpufreq_init);
diff --git a/arch/arm/mach-s3c2412/cpu-freq.c b/arch/arm/mach-s3c24xx/cpufreq-s3c2412.c
similarity index 97%
rename from arch/arm/mach-s3c2412/cpu-freq.c
rename to arch/arm/mach-s3c24xx/cpufreq-s3c2412.c
index 125be7d..8bf0f3a 100644
--- a/arch/arm/mach-s3c2412/cpu-freq.c
+++ b/arch/arm/mach-s3c24xx/cpufreq-s3c2412.c
@@ -1,5 +1,4 @@
-/* linux/arch/arm/mach-s3c2412/cpu-freq.c
- *
+/*
* Copyright 2008 Simtec Electronics
* http://armlinux.simtec.co.uk/
* Ben Dooks <ben@simtec.co.uk>
@@ -26,12 +25,13 @@
#include <asm/mach/map.h>
#include <mach/regs-clock.h>
-#include <mach/regs-s3c2412-mem.h>
#include <plat/cpu.h>
#include <plat/clock.h>
#include <plat/cpu-freq-core.h>
+#include "s3c2412.h"
+
/* our clock resources. */
static struct clk *xtal;
static struct clk *fclk;
@@ -111,7 +111,7 @@
return 0;
- invalid:
+invalid:
return -EINVAL;
}
@@ -255,5 +255,4 @@
{
return subsys_interface_register(&s3c2412_cpufreq_interface);
}
-
arch_initcall(s3c2412_cpufreq_init);
diff --git a/arch/arm/mach-s3c2440/s3c2440-cpufreq.c b/arch/arm/mach-s3c24xx/cpufreq-s3c2440.c
similarity index 98%
rename from arch/arm/mach-s3c2440/s3c2440-cpufreq.c
rename to arch/arm/mach-s3c24xx/cpufreq-s3c2440.c
index 6177676..72b2cc8 100644
--- a/arch/arm/mach-s3c2440/s3c2440-cpufreq.c
+++ b/arch/arm/mach-s3c24xx/cpufreq-s3c2440.c
@@ -1,5 +1,4 @@
-/* linux/arch/arm/plat-s3c24xx/s3c2440-cpufreq.c
- *
+/*
* Copyright (c) 2006-2009 Simtec Electronics
* http://armlinux.simtec.co.uk/
* Ben Dooks <ben@simtec.co.uk>
@@ -310,5 +309,4 @@
{
return subsys_interface_register(&s3c2442_cpufreq_interface);
}
-
subsys_initcall(s3c2442_cpufreq_init);
diff --git a/arch/arm/plat-s3c24xx/s3c2410-cpufreq-utils.c b/arch/arm/mach-s3c24xx/cpufreq-utils.c
similarity index 94%
rename from arch/arm/plat-s3c24xx/s3c2410-cpufreq-utils.c
rename to arch/arm/mach-s3c24xx/cpufreq-utils.c
index 43ea801..ddd8280 100644
--- a/arch/arm/plat-s3c24xx/s3c2410-cpufreq-utils.c
+++ b/arch/arm/mach-s3c24xx/cpufreq-utils.c
@@ -1,5 +1,4 @@
-/* linux/arch/arm/plat-s3c24xx/s3c2410-cpufreq-utils.c
- *
+/*
* Copyright (c) 2009 Simtec Electronics
* http://armlinux.simtec.co.uk/
* Ben Dooks <ben@simtec.co.uk>
@@ -17,11 +16,12 @@
#include <linux/io.h>
#include <mach/map.h>
-#include <mach/regs-mem.h>
#include <mach/regs-clock.h>
#include <plat/cpu-freq-core.h>
+#include "regs-mem.h"
+
/**
* s3c2410_cpufreq_setrefresh - set SDRAM refresh value
* @cfg: The frequency configuration
diff --git a/arch/arm/plat-s3c24xx/cpu-freq.c b/arch/arm/mach-s3c24xx/cpufreq.c
similarity index 99%
rename from arch/arm/plat-s3c24xx/cpu-freq.c
rename to arch/arm/mach-s3c24xx/cpufreq.c
index 4680799..5f181e7 100644
--- a/arch/arm/plat-s3c24xx/cpu-freq.c
+++ b/arch/arm/mach-s3c24xx/cpufreq.c
@@ -1,5 +1,4 @@
-/* linux/arch/arm/plat-s3c24xx/cpu-freq.c
- *
+/*
* Copyright (c) 2006-2008 Simtec Electronics
* http://armlinux.simtec.co.uk/
* Ben Dooks <ben@simtec.co.uk>
diff --git a/arch/arm/mach-s3c24xx/dma-s3c2410.c b/arch/arm/mach-s3c24xx/dma-s3c2410.c
index 4803338..25d085a 100644
--- a/arch/arm/mach-s3c24xx/dma-s3c2410.c
+++ b/arch/arm/mach-s3c24xx/dma-s3c2410.c
@@ -27,7 +27,6 @@
#include <mach/regs-gpio.h>
#include <plat/regs-ac97.h>
#include <plat/regs-dma.h>
-#include <mach/regs-mem.h>
#include <mach/regs-lcd.h>
#include <mach/regs-sdi.h>
#include <plat/regs-iis.h>
diff --git a/arch/arm/mach-s3c24xx/dma-s3c2412.c b/arch/arm/mach-s3c24xx/dma-s3c2412.c
index 38472ac..d2408ba 100644
--- a/arch/arm/mach-s3c24xx/dma-s3c2412.c
+++ b/arch/arm/mach-s3c24xx/dma-s3c2412.c
@@ -27,7 +27,6 @@
#include <mach/regs-gpio.h>
#include <plat/regs-ac97.h>
#include <plat/regs-dma.h>
-#include <mach/regs-mem.h>
#include <mach/regs-lcd.h>
#include <mach/regs-sdi.h>
#include <plat/regs-iis.h>
diff --git a/arch/arm/mach-s3c24xx/dma-s3c2440.c b/arch/arm/mach-s3c24xx/dma-s3c2440.c
index 5f0a0c8..0b86e74 100644
--- a/arch/arm/mach-s3c24xx/dma-s3c2440.c
+++ b/arch/arm/mach-s3c24xx/dma-s3c2440.c
@@ -27,7 +27,6 @@
#include <mach/regs-gpio.h>
#include <plat/regs-ac97.h>
#include <plat/regs-dma.h>
-#include <mach/regs-mem.h>
#include <mach/regs-lcd.h>
#include <mach/regs-sdi.h>
#include <plat/regs-iis.h>
diff --git a/arch/arm/mach-s3c24xx/dma-s3c2443.c b/arch/arm/mach-s3c24xx/dma-s3c2443.c
index 2d94228..0553625 100644
--- a/arch/arm/mach-s3c24xx/dma-s3c2443.c
+++ b/arch/arm/mach-s3c24xx/dma-s3c2443.c
@@ -27,7 +27,6 @@
#include <mach/regs-gpio.h>
#include <plat/regs-ac97.h>
#include <plat/regs-dma.h>
-#include <mach/regs-mem.h>
#include <mach/regs-lcd.h>
#include <mach/regs-sdi.h>
#include <plat/regs-iis.h>
diff --git a/arch/arm/plat-s3c24xx/dma.c b/arch/arm/mach-s3c24xx/dma.c
similarity index 99%
rename from arch/arm/plat-s3c24xx/dma.c
rename to arch/arm/mach-s3c24xx/dma.c
index ba3e76c..aab6490 100644
--- a/arch/arm/plat-s3c24xx/dma.c
+++ b/arch/arm/mach-s3c24xx/dma.c
@@ -1,5 +1,4 @@
-/* linux/arch/arm/plat-s3c24xx/dma.c
- *
+/*
* Copyright 2003-2006 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
*
diff --git a/arch/arm/mach-s3c24xx/gta02.h b/arch/arm/mach-s3c24xx/gta02.h
new file mode 100644
index 0000000..9430a71
--- /dev/null
+++ b/arch/arm/mach-s3c24xx/gta02.h
@@ -0,0 +1,23 @@
+/*
+ * GTA02 header
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __MACH_S3C24XX_GTA02_H
+#define __MACH_S3C24XX_GTA02_H __FILE__
+
+#include <mach/regs-gpio.h>
+
+#define GTA02_GPIO_AUX_LED S3C2410_GPB(2)
+#define GTA02_GPIO_USB_PULLUP S3C2410_GPB(9)
+#define GTA02_GPIO_AUX_KEY S3C2410_GPF(6)
+#define GTA02_GPIO_HOLD_KEY S3C2410_GPF(7)
+#define GTA02_GPIO_AMP_SHUT S3C2410_GPJ(1) /* v2 + v3 + v4 only */
+#define GTA02_GPIO_HP_IN S3C2410_GPJ(2) /* v2 + v3 + v4 only */
+
+#define GTA02_IRQ_PCF50633 IRQ_EINT9
+
+#endif /* __MACH_S3C24XX_GTA02_H */
diff --git a/arch/arm/mach-s3c24xx/h1940-bluetooth.c b/arch/arm/mach-s3c24xx/h1940-bluetooth.c
index 3f40c61..5b98bfd 100644
--- a/arch/arm/mach-s3c24xx/h1940-bluetooth.c
+++ b/arch/arm/mach-s3c24xx/h1940-bluetooth.c
@@ -19,10 +19,10 @@
#include <linux/gpio.h>
#include <linux/rfkill.h>
-#include <mach/regs-gpio.h>
#include <mach/hardware.h>
-#include <mach/h1940-latch.h>
-#include <mach/h1940.h>
+#include <mach/regs-gpio.h>
+
+#include "h1940.h"
#define DRV_NAME "h1940-bt"
diff --git a/arch/arm/mach-s3c24xx/include/mach/h1940-latch.h b/arch/arm/mach-s3c24xx/h1940.h
similarity index 69%
rename from arch/arm/mach-s3c24xx/include/mach/h1940-latch.h
rename to arch/arm/mach-s3c24xx/h1940.h
index fc897d3..2950cc4 100644
--- a/arch/arm/mach-s3c24xx/include/mach/h1940-latch.h
+++ b/arch/arm/mach-s3c24xx/h1940.h
@@ -1,20 +1,30 @@
-/* arch/arm/mach-s3c2410/include/mach/h1940-latch.h
+/*
+ * Copyright 2006 Ben Dooks <ben-linux@fluff.org>
*
* Copyright (c) 2005 Simtec Electronics
* http://armlinux.simtec.co.uk/
* Ben Dooks <ben@simtec.co.uk>
*
- * iPAQ H1940 series - latch definitions
+ * iPAQ H1940 series definitions
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
-#ifndef __ASM_ARCH_H1940_LATCH_H
-#define __ASM_ARCH_H1940_LATCH_H
+#ifndef __MACH_S3C24XX_H1940_H
+#define __MACH_S3C24XX_H1940_H __FILE__
-#include <asm/gpio.h>
+#define H1940_SUSPEND_CHECKSUM (0x30003ff8)
+#define H1940_SUSPEND_RESUMEAT (0x30081000)
+#define H1940_SUSPEND_CHECK (0x30080000)
+
+extern void h1940_pm_return(void);
+extern int h1940_led_blink_set(unsigned gpio, int state,
+ unsigned long *delay_on,
+ unsigned long *delay_off);
+
+#include <linux/gpio.h>
#define H1940_LATCH_GPIO(x) (S3C_GPIO_END + (x))
@@ -40,4 +50,4 @@
#define H1940_LATCH_LED_GREEN H1940_LATCH_GPIO(14)
#define H1940_LATCH_LED_FLASH H1940_LATCH_GPIO(15)
-#endif /* __ASM_ARCH_H1940_LATCH_H */
+#endif /* __MACH_S3C24XX_H1940_H */
diff --git a/arch/arm/mach-s3c24xx/include/mach/anubis-cpld.h b/arch/arm/mach-s3c24xx/include/mach/anubis-cpld.h
deleted file mode 100644
index 1b614d5..0000000
--- a/arch/arm/mach-s3c24xx/include/mach/anubis-cpld.h
+++ /dev/null
@@ -1,25 +0,0 @@
-/* arch/arm/mach-s3c2410/include/mach/anubis-cpld.h
- *
- * Copyright (c) 2005 Simtec Electronics
- * http://www.simtec.co.uk/products/
- * Ben Dooks <ben@simtec.co.uk>
- *
- * ANUBIS - CPLD control constants
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_ANUBISCPLD_H
-#define __ASM_ARCH_ANUBISCPLD_H
-
-/* CTRL2 - NAND WP control, IDE Reset assert/check */
-
-#define ANUBIS_CTRL1_NANDSEL (0x3)
-
-/* IDREG - revision */
-
-#define ANUBIS_IDREG_REVMASK (0x7)
-
-#endif /* __ASM_ARCH_ANUBISCPLD_H */
diff --git a/arch/arm/mach-s3c24xx/include/mach/anubis-irq.h b/arch/arm/mach-s3c24xx/include/mach/anubis-irq.h
deleted file mode 100644
index a2a3281..0000000
--- a/arch/arm/mach-s3c24xx/include/mach/anubis-irq.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/* arch/arm/mach-s3c2410/include/mach/anubis-irq.h
- *
- * Copyright (c) 2005 Simtec Electronics
- * http://www.simtec.co.uk/products/
- * Ben Dooks <ben@simtec.co.uk>
- *
- * ANUBIS - IRQ Number definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_ANUBISIRQ_H
-#define __ASM_ARCH_ANUBISIRQ_H
-
-#define IRQ_IDE0 IRQ_EINT2
-#define IRQ_IDE1 IRQ_EINT3
-#define IRQ_ASIX IRQ_EINT1
-
-#endif /* __ASM_ARCH_ANUBISIRQ_H */
diff --git a/arch/arm/mach-s3c24xx/include/mach/anubis-map.h b/arch/arm/mach-s3c24xx/include/mach/anubis-map.h
deleted file mode 100644
index c9deb3a..0000000
--- a/arch/arm/mach-s3c24xx/include/mach/anubis-map.h
+++ /dev/null
@@ -1,38 +0,0 @@
-/* arch/arm/mach-s3c2410/include/mach/anubis-map.h
- *
- * Copyright (c) 2005 Simtec Electronics
- * http://www.simtec.co.uk/products/
- * Ben Dooks <ben@simtec.co.uk>
- *
- * ANUBIS - Memory map definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-/* needs arch/map.h including with this */
-
-#ifndef __ASM_ARCH_ANUBISMAP_H
-#define __ASM_ARCH_ANUBISMAP_H
-
-/* start peripherals off after the S3C2410 */
-
-#define ANUBIS_IOADDR(x) (S3C2410_ADDR((x) + 0x01800000))
-
-#define ANUBIS_PA_CPLD (S3C2410_CS1 | (1<<26))
-
-/* we put the CPLD registers next, to get them out of the way */
-
-#define ANUBIS_VA_CTRL1 ANUBIS_IOADDR(0x00000000) /* 0x01800000 */
-#define ANUBIS_PA_CTRL1 (ANUBIS_PA_CPLD)
-
-#define ANUBIS_VA_IDREG ANUBIS_IOADDR(0x00300000) /* 0x01B00000 */
-#define ANUBIS_PA_IDREG (ANUBIS_PA_CPLD + (3<<23))
-
-#define ANUBIS_IDEPRI ANUBIS_IOADDR(0x01000000)
-#define ANUBIS_IDEPRIAUX ANUBIS_IOADDR(0x01100000)
-#define ANUBIS_IDESEC ANUBIS_IOADDR(0x01200000)
-#define ANUBIS_IDESECAUX ANUBIS_IOADDR(0x01300000)
-
-#endif /* __ASM_ARCH_ANUBISMAP_H */
diff --git a/arch/arm/mach-s3c24xx/include/mach/bast-cpld.h b/arch/arm/mach-s3c24xx/include/mach/bast-cpld.h
deleted file mode 100644
index bee2a7a..0000000
--- a/arch/arm/mach-s3c24xx/include/mach/bast-cpld.h
+++ /dev/null
@@ -1,53 +0,0 @@
-/* arch/arm/mach-s3c2410/include/mach/bast-cpld.h
- *
- * Copyright (c) 2003-2004 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- *
- * BAST - CPLD control constants
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_BASTCPLD_H
-#define __ASM_ARCH_BASTCPLD_H
-
-/* CTRL1 - Audio LR routing */
-
-#define BAST_CPLD_CTRL1_LRCOFF (0x00)
-#define BAST_CPLD_CTRL1_LRCADC (0x01)
-#define BAST_CPLD_CTRL1_LRCDAC (0x02)
-#define BAST_CPLD_CTRL1_LRCARM (0x03)
-#define BAST_CPLD_CTRL1_LRMASK (0x03)
-
-/* CTRL2 - NAND WP control, IDE Reset assert/check */
-
-#define BAST_CPLD_CTRL2_WNAND (0x04)
-#define BAST_CPLD_CTLR2_IDERST (0x08)
-
-/* CTRL3 - rom write control, CPLD identity */
-
-#define BAST_CPLD_CTRL3_IDMASK (0x0e)
-#define BAST_CPLD_CTRL3_ROMWEN (0x01)
-
-/* CTRL4 - 8bit LCD interface control/status */
-
-#define BAST_CPLD_CTRL4_LLAT (0x01)
-#define BAST_CPLD_CTRL4_LCDRW (0x02)
-#define BAST_CPLD_CTRL4_LCDCMD (0x04)
-#define BAST_CPLD_CTRL4_LCDE2 (0x01)
-
-/* CTRL5 - DMA routing */
-
-#define BAST_CPLD_DMA0_PRIIDE (0<<0)
-#define BAST_CPLD_DMA0_SECIDE (1<<0)
-#define BAST_CPLD_DMA0_ISA15 (2<<0)
-#define BAST_CPLD_DMA0_ISA36 (3<<0)
-
-#define BAST_CPLD_DMA1_PRIIDE (0<<2)
-#define BAST_CPLD_DMA1_SECIDE (1<<2)
-#define BAST_CPLD_DMA1_ISA15 (2<<2)
-#define BAST_CPLD_DMA1_ISA36 (3<<2)
-
-#endif /* __ASM_ARCH_BASTCPLD_H */
diff --git a/arch/arm/mach-s3c24xx/include/mach/bast-irq.h b/arch/arm/mach-s3c24xx/include/mach/bast-irq.h
deleted file mode 100644
index cac428c..0000000
--- a/arch/arm/mach-s3c24xx/include/mach/bast-irq.h
+++ /dev/null
@@ -1,29 +0,0 @@
-/* arch/arm/mach-s3c2410/include/mach/bast-irq.h
- *
- * Copyright (c) 2003-2004 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- *
- * Machine BAST - IRQ Number definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_BASTIRQ_H
-#define __ASM_ARCH_BASTIRQ_H
-
-/* irq numbers to onboard peripherals */
-
-#define IRQ_USBOC IRQ_EINT18
-#define IRQ_IDE0 IRQ_EINT16
-#define IRQ_IDE1 IRQ_EINT17
-#define IRQ_PCSERIAL1 IRQ_EINT15
-#define IRQ_PCSERIAL2 IRQ_EINT14
-#define IRQ_PCPARALLEL IRQ_EINT13
-#define IRQ_ASIX IRQ_EINT11
-#define IRQ_DM9000 IRQ_EINT10
-#define IRQ_ISA IRQ_EINT9
-#define IRQ_SMALERT IRQ_EINT8
-
-#endif /* __ASM_ARCH_BASTIRQ_H */
diff --git a/arch/arm/mach-s3c24xx/include/mach/bast-map.h b/arch/arm/mach-s3c24xx/include/mach/bast-map.h
deleted file mode 100644
index eecea2a..0000000
--- a/arch/arm/mach-s3c24xx/include/mach/bast-map.h
+++ /dev/null
@@ -1,146 +0,0 @@
-/* arch/arm/mach-s3c2410/include/mach/bast-map.h
- *
- * Copyright (c) 2003-2004 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- *
- * Machine BAST - Memory map definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-/* needs arch/map.h including with this */
-
-/* ok, we've used up to 0x13000000, now we need to find space for the
- * peripherals that live in the nGCS[x] areas, which are quite numerous
- * in their space. We also have the board's CPLD to find register space
- * for.
- */
-
-#ifndef __ASM_ARCH_BASTMAP_H
-#define __ASM_ARCH_BASTMAP_H
-
-#define BAST_IOADDR(x) (S3C2410_ADDR((x) + 0x01300000))
-
-/* we put the CPLD registers next, to get them out of the way */
-
-#define BAST_VA_CTRL1 BAST_IOADDR(0x00000000) /* 0x01300000 */
-#define BAST_PA_CTRL1 (S3C2410_CS5 | 0x7800000)
-
-#define BAST_VA_CTRL2 BAST_IOADDR(0x00100000) /* 0x01400000 */
-#define BAST_PA_CTRL2 (S3C2410_CS1 | 0x6000000)
-
-#define BAST_VA_CTRL3 BAST_IOADDR(0x00200000) /* 0x01500000 */
-#define BAST_PA_CTRL3 (S3C2410_CS1 | 0x6800000)
-
-#define BAST_VA_CTRL4 BAST_IOADDR(0x00300000) /* 0x01600000 */
-#define BAST_PA_CTRL4 (S3C2410_CS1 | 0x7000000)
-
-/* next, we have the PC104 ISA interrupt registers */
-
-#define BAST_PA_PC104_IRQREQ (S3C2410_CS5 | 0x6000000) /* 0x01700000 */
-#define BAST_VA_PC104_IRQREQ BAST_IOADDR(0x00400000)
-
-#define BAST_PA_PC104_IRQRAW (S3C2410_CS5 | 0x6800000) /* 0x01800000 */
-#define BAST_VA_PC104_IRQRAW BAST_IOADDR(0x00500000)
-
-#define BAST_PA_PC104_IRQMASK (S3C2410_CS5 | 0x7000000) /* 0x01900000 */
-#define BAST_VA_PC104_IRQMASK BAST_IOADDR(0x00600000)
-
-#define BAST_PA_LCD_RCMD1 (0x8800000)
-#define BAST_VA_LCD_RCMD1 BAST_IOADDR(0x00700000)
-
-#define BAST_PA_LCD_WCMD1 (0x8000000)
-#define BAST_VA_LCD_WCMD1 BAST_IOADDR(0x00800000)
-
-#define BAST_PA_LCD_RDATA1 (0x9800000)
-#define BAST_VA_LCD_RDATA1 BAST_IOADDR(0x00900000)
-
-#define BAST_PA_LCD_WDATA1 (0x9000000)
-#define BAST_VA_LCD_WDATA1 BAST_IOADDR(0x00A00000)
-
-#define BAST_PA_LCD_RCMD2 (0xA800000)
-#define BAST_VA_LCD_RCMD2 BAST_IOADDR(0x00B00000)
-
-#define BAST_PA_LCD_WCMD2 (0xA000000)
-#define BAST_VA_LCD_WCMD2 BAST_IOADDR(0x00C00000)
-
-#define BAST_PA_LCD_RDATA2 (0xB800000)
-#define BAST_VA_LCD_RDATA2 BAST_IOADDR(0x00D00000)
-
-#define BAST_PA_LCD_WDATA2 (0xB000000)
-#define BAST_VA_LCD_WDATA2 BAST_IOADDR(0x00E00000)
-
-
-/* 0xE0000000 contains the IO space that is split by speed and
- * whether the access is for 8 or 16bit IO... this ensures that
- * the correct access is made
- *
- * 0x10000000 of space, partitioned as so:
- *
- * 0x00000000 to 0x04000000 8bit, slow
- * 0x04000000 to 0x08000000 16bit, slow
- * 0x08000000 to 0x0C000000 16bit, net
- * 0x0C000000 to 0x10000000 16bit, fast
- *
- * each of these spaces has the following in:
- *
- * 0x00000000 to 0x01000000 16MB ISA IO space
- * 0x01000000 to 0x02000000 16MB ISA memory space
- * 0x02000000 to 0x02100000 1MB IDE primary channel
- * 0x02100000 to 0x02200000 1MB IDE primary channel aux
- * 0x02200000 to 0x02400000 1MB IDE secondary channel
- * 0x02300000 to 0x02400000 1MB IDE secondary channel aux
- * 0x02400000 to 0x02500000 1MB ASIX ethernet controller
- * 0x02500000 to 0x02600000 1MB Davicom DM9000 ethernet controller
- * 0x02600000 to 0x02700000 1MB PC SuperIO controller
- *
- * the phyiscal layout of the zones are:
- * nGCS2 - 8bit, slow
- * nGCS3 - 16bit, slow
- * nGCS4 - 16bit, net
- * nGCS5 - 16bit, fast
- */
-
-#define BAST_VA_MULTISPACE (0xE0000000)
-
-#define BAST_VA_ISAIO (BAST_VA_MULTISPACE + 0x00000000)
-#define BAST_VA_ISAMEM (BAST_VA_MULTISPACE + 0x01000000)
-#define BAST_VA_IDEPRI (BAST_VA_MULTISPACE + 0x02000000)
-#define BAST_VA_IDEPRIAUX (BAST_VA_MULTISPACE + 0x02100000)
-#define BAST_VA_IDESEC (BAST_VA_MULTISPACE + 0x02200000)
-#define BAST_VA_IDESECAUX (BAST_VA_MULTISPACE + 0x02300000)
-#define BAST_VA_ASIXNET (BAST_VA_MULTISPACE + 0x02400000)
-#define BAST_VA_DM9000 (BAST_VA_MULTISPACE + 0x02500000)
-#define BAST_VA_SUPERIO (BAST_VA_MULTISPACE + 0x02600000)
-
-#define BAST_VA_MULTISPACE (0xE0000000)
-
-#define BAST_VAM_CS2 (0x00000000)
-#define BAST_VAM_CS3 (0x04000000)
-#define BAST_VAM_CS4 (0x08000000)
-#define BAST_VAM_CS5 (0x0C000000)
-
-/* physical offset addresses for the peripherals */
-
-#define BAST_PA_ISAIO (0x00000000)
-#define BAST_PA_ASIXNET (0x01000000)
-#define BAST_PA_SUPERIO (0x01800000)
-#define BAST_PA_IDEPRI (0x02000000)
-#define BAST_PA_IDEPRIAUX (0x02800000)
-#define BAST_PA_IDESEC (0x03000000)
-#define BAST_PA_IDESECAUX (0x03800000)
-#define BAST_PA_ISAMEM (0x04000000)
-#define BAST_PA_DM9000 (0x05000000)
-
-/* some configurations for the peripherals */
-
-#define BAST_PCSIO (BAST_VA_SUPERIO + BAST_VAM_CS2)
-/* */
-
-#define BAST_ASIXNET_CS BAST_VAM_CS5
-#define BAST_IDE_CS BAST_VAM_CS5
-#define BAST_DM9000_CS BAST_VAM_CS4
-
-#endif /* __ASM_ARCH_BASTMAP_H */
diff --git a/arch/arm/mach-s3c24xx/include/mach/gpio-fns.h b/arch/arm/mach-s3c24xx/include/mach/gpio-fns.h
deleted file mode 100644
index c53ad34..0000000
--- a/arch/arm/mach-s3c24xx/include/mach/gpio-fns.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <plat/gpio-fns.h>
diff --git a/arch/arm/mach-s3c24xx/include/mach/gpio-nrs.h b/arch/arm/mach-s3c24xx/include/mach/gpio-nrs.h
deleted file mode 100644
index 3890a05..0000000
--- a/arch/arm/mach-s3c24xx/include/mach/gpio-nrs.h
+++ /dev/null
@@ -1,97 +0,0 @@
-/* arch/arm/mach-s3c2410/include/mach/gpio-nrs.h
- *
- * Copyright (c) 2008 Simtec Electronics
- * http://armlinux.simtec.co.uk/
- * Ben Dooks <ben@simtec.co.uk>
- *
- * S3C2410 - GPIO bank numbering
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __MACH_GPIONRS_H
-#define __MACH_GPIONRS_H
-
-#define S3C2410_GPIONO(bank,offset) ((bank) + (offset))
-
-#define S3C2410_GPIO_BANKG (32*6)
-#define S3C2410_GPIO_BANKH (32*7)
-
-/* GPIO sizes for various SoCs:
- *
- * 2442
- * 2410 2412 2440 2443 2416
- * ---- ---- ---- ---- ----
- * A 23 22 25 16 25
- * B 11 11 11 11 9
- * C 16 15 16 16 16
- * D 16 16 16 16 16
- * E 16 16 16 16 16
- * F 8 8 8 8 8
- * G 16 16 16 16 8
- * H 11 11 9 15 15
- * J -- -- 13 16 --
- * K -- -- -- -- 16
- * L -- -- -- 15 7
- * M -- -- -- 2 2
- */
-
-/* GPIO bank sizes */
-#define S3C2410_GPIO_A_NR (32)
-#define S3C2410_GPIO_B_NR (32)
-#define S3C2410_GPIO_C_NR (32)
-#define S3C2410_GPIO_D_NR (32)
-#define S3C2410_GPIO_E_NR (32)
-#define S3C2410_GPIO_F_NR (32)
-#define S3C2410_GPIO_G_NR (32)
-#define S3C2410_GPIO_H_NR (32)
-#define S3C2410_GPIO_J_NR (32) /* technically 16. */
-#define S3C2410_GPIO_K_NR (32) /* technically 16. */
-#define S3C2410_GPIO_L_NR (32) /* technically 15. */
-#define S3C2410_GPIO_M_NR (32) /* technically 2. */
-
-#if CONFIG_S3C_GPIO_SPACE != 0
-#error CONFIG_S3C_GPIO_SPACE cannot be nonzero at the moment
-#endif
-
-#define S3C2410_GPIO_NEXT(__gpio) \
- ((__gpio##_START) + (__gpio##_NR) + CONFIG_S3C_GPIO_SPACE + 0)
-
-#ifndef __ASSEMBLY__
-
-enum s3c_gpio_number {
- S3C2410_GPIO_A_START = 0,
- S3C2410_GPIO_B_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_A),
- S3C2410_GPIO_C_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_B),
- S3C2410_GPIO_D_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_C),
- S3C2410_GPIO_E_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_D),
- S3C2410_GPIO_F_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_E),
- S3C2410_GPIO_G_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_F),
- S3C2410_GPIO_H_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_G),
- S3C2410_GPIO_J_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_H),
- S3C2410_GPIO_K_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_J),
- S3C2410_GPIO_L_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_K),
- S3C2410_GPIO_M_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_L),
-};
-
-#endif /* __ASSEMBLY__ */
-
-/* S3C2410 GPIO number definitions. */
-
-#define S3C2410_GPA(_nr) (S3C2410_GPIO_A_START + (_nr))
-#define S3C2410_GPB(_nr) (S3C2410_GPIO_B_START + (_nr))
-#define S3C2410_GPC(_nr) (S3C2410_GPIO_C_START + (_nr))
-#define S3C2410_GPD(_nr) (S3C2410_GPIO_D_START + (_nr))
-#define S3C2410_GPE(_nr) (S3C2410_GPIO_E_START + (_nr))
-#define S3C2410_GPF(_nr) (S3C2410_GPIO_F_START + (_nr))
-#define S3C2410_GPG(_nr) (S3C2410_GPIO_G_START + (_nr))
-#define S3C2410_GPH(_nr) (S3C2410_GPIO_H_START + (_nr))
-#define S3C2410_GPJ(_nr) (S3C2410_GPIO_J_START + (_nr))
-#define S3C2410_GPK(_nr) (S3C2410_GPIO_K_START + (_nr))
-#define S3C2410_GPL(_nr) (S3C2410_GPIO_L_START + (_nr))
-#define S3C2410_GPM(_nr) (S3C2410_GPIO_M_START + (_nr))
-
-#endif /* __MACH_GPIONRS_H */
-
diff --git a/arch/arm/mach-s3c24xx/include/mach/gpio-track.h b/arch/arm/mach-s3c24xx/include/mach/gpio-track.h
deleted file mode 100644
index c410a07..0000000
--- a/arch/arm/mach-s3c24xx/include/mach/gpio-track.h
+++ /dev/null
@@ -1,33 +0,0 @@
-/* arch/arm/mach-s3c24100/include/mach/gpio-core.h
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- * http://armlinux.simtec.co.uk/
- *
- * S3C2410 - GPIO core support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_GPIO_CORE_H
-#define __ASM_ARCH_GPIO_CORE_H __FILE__
-
-#include <mach/regs-gpio.h>
-
-extern struct samsung_gpio_chip s3c24xx_gpios[];
-
-static inline struct samsung_gpio_chip *samsung_gpiolib_getchip(unsigned int pin)
-{
- struct samsung_gpio_chip *chip;
-
- if (pin > S3C_GPIO_END)
- return NULL;
-
- chip = &s3c24xx_gpios[pin/32];
- return ((pin - chip->chip.base) < chip->chip.ngpio) ? chip : NULL;
-}
-
-#endif /* __ASM_ARCH_GPIO_CORE_H */
diff --git a/arch/arm/mach-s3c24xx/include/mach/gpio.h b/arch/arm/mach-s3c24xx/include/mach/gpio.h
index 6fac70f..1459156 100644
--- a/arch/arm/mach-s3c24xx/include/mach/gpio.h
+++ b/arch/arm/mach-s3c24xx/include/mach/gpio.h
@@ -1,5 +1,4 @@
-/* arch/arm/mach-s3c2410/include/mach/gpio.h
- *
+/*
* Copyright (c) 2008 Simtec Electronics
* http://armlinux.simtec.co.uk/
* Ben Dooks <ben@simtec.co.uk>
@@ -15,6 +14,9 @@
* devices that need GPIO.
*/
+#ifndef __MACH_GPIO_H
+#define __MACH_GPIO_H __FILE__
+
#ifdef CONFIG_CPU_S3C244X
#define ARCH_NR_GPIOS (32 * 9 + CONFIG_S3C24XX_GPIO_EXTRA)
#elif defined(CONFIG_CPU_S3C2443) || defined(CONFIG_CPU_S3C2416)
@@ -23,8 +25,83 @@
#define ARCH_NR_GPIOS (256 + CONFIG_S3C24XX_GPIO_EXTRA)
#endif
-#include <mach/gpio-nrs.h>
-#include <mach/gpio-fns.h>
+/*
+ * GPIO sizes for various SoCs:
+ *
+ * 2410 2412 2440 2443 2416
+ * 2442
+ * ---- ---- ---- ---- ----
+ * A 23 22 25 16 25
+ * B 11 11 11 11 9
+ * C 16 15 16 16 16
+ * D 16 16 16 16 16
+ * E 16 16 16 16 16
+ * F 8 8 8 8 8
+ * G 16 16 16 16 8
+ * H 11 11 9 15 15
+ * J -- -- 13 16 --
+ * K -- -- -- -- 16
+ * L -- -- -- 15 7
+ * M -- -- -- 2 2
+ */
+
+/* GPIO bank sizes */
+
+#define S3C2410_GPIO_A_NR (32)
+#define S3C2410_GPIO_B_NR (32)
+#define S3C2410_GPIO_C_NR (32)
+#define S3C2410_GPIO_D_NR (32)
+#define S3C2410_GPIO_E_NR (32)
+#define S3C2410_GPIO_F_NR (32)
+#define S3C2410_GPIO_G_NR (32)
+#define S3C2410_GPIO_H_NR (32)
+#define S3C2410_GPIO_J_NR (32) /* technically 16. */
+#define S3C2410_GPIO_K_NR (32) /* technically 16. */
+#define S3C2410_GPIO_L_NR (32) /* technically 15. */
+#define S3C2410_GPIO_M_NR (32) /* technically 2. */
+
+#if CONFIG_S3C_GPIO_SPACE != 0
+#error CONFIG_S3C_GPIO_SPACE cannot be nonzero at the moment
+#endif
+
+#define S3C2410_GPIO_NEXT(__gpio) \
+ ((__gpio##_START) + (__gpio##_NR) + CONFIG_S3C_GPIO_SPACE + 0)
+
+#ifndef __ASSEMBLY__
+
+enum s3c_gpio_number {
+ S3C2410_GPIO_A_START = 0,
+ S3C2410_GPIO_B_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_A),
+ S3C2410_GPIO_C_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_B),
+ S3C2410_GPIO_D_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_C),
+ S3C2410_GPIO_E_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_D),
+ S3C2410_GPIO_F_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_E),
+ S3C2410_GPIO_G_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_F),
+ S3C2410_GPIO_H_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_G),
+ S3C2410_GPIO_J_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_H),
+ S3C2410_GPIO_K_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_J),
+ S3C2410_GPIO_L_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_K),
+ S3C2410_GPIO_M_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_L),
+};
+
+#endif /* __ASSEMBLY__ */
+
+/* S3C2410 GPIO number definitions. */
+
+#define S3C2410_GPA(_nr) (S3C2410_GPIO_A_START + (_nr))
+#define S3C2410_GPB(_nr) (S3C2410_GPIO_B_START + (_nr))
+#define S3C2410_GPC(_nr) (S3C2410_GPIO_C_START + (_nr))
+#define S3C2410_GPD(_nr) (S3C2410_GPIO_D_START + (_nr))
+#define S3C2410_GPE(_nr) (S3C2410_GPIO_E_START + (_nr))
+#define S3C2410_GPF(_nr) (S3C2410_GPIO_F_START + (_nr))
+#define S3C2410_GPG(_nr) (S3C2410_GPIO_G_START + (_nr))
+#define S3C2410_GPH(_nr) (S3C2410_GPIO_H_START + (_nr))
+#define S3C2410_GPJ(_nr) (S3C2410_GPIO_J_START + (_nr))
+#define S3C2410_GPK(_nr) (S3C2410_GPIO_K_START + (_nr))
+#define S3C2410_GPL(_nr) (S3C2410_GPIO_L_START + (_nr))
+#define S3C2410_GPM(_nr) (S3C2410_GPIO_M_START + (_nr))
+
+#include <plat/gpio-cfg.h>
#ifdef CONFIG_CPU_S3C244X
#define S3C_GPIO_END (S3C2410_GPJ(0) + 32)
@@ -33,3 +110,5 @@
#else
#define S3C_GPIO_END (S3C2410_GPH(0) + 32)
#endif
+
+#endif /* __MACH_GPIO_H */
diff --git a/arch/arm/mach-s3c24xx/include/mach/gta02.h b/arch/arm/mach-s3c24xx/include/mach/gta02.h
deleted file mode 100644
index 2173934..0000000
--- a/arch/arm/mach-s3c24xx/include/mach/gta02.h
+++ /dev/null
@@ -1,15 +0,0 @@
-#ifndef _GTA02_H
-#define _GTA02_H
-
-#include <mach/regs-gpio.h>
-
-#define GTA02_GPIO_AUX_LED S3C2410_GPB(2)
-#define GTA02_GPIO_USB_PULLUP S3C2410_GPB(9)
-#define GTA02_GPIO_AUX_KEY S3C2410_GPF(6)
-#define GTA02_GPIO_HOLD_KEY S3C2410_GPF(7)
-#define GTA02_GPIO_AMP_SHUT S3C2410_GPJ(1) /* v2 + v3 + v4 only */
-#define GTA02_GPIO_HP_IN S3C2410_GPJ(2) /* v2 + v3 + v4 only */
-
-#define GTA02_IRQ_PCF50633 IRQ_EINT9
-
-#endif /* _GTA02_H */
diff --git a/arch/arm/mach-s3c24xx/include/mach/h1940.h b/arch/arm/mach-s3c24xx/include/mach/h1940.h
deleted file mode 100644
index 2aa683c..0000000
--- a/arch/arm/mach-s3c24xx/include/mach/h1940.h
+++ /dev/null
@@ -1,24 +0,0 @@
-/* arch/arm/mach-s3c2410/include/mach/h1940.h
- *
- * Copyright 2006 Ben Dooks <ben-linux@fluff.org>
- *
- * H1940 definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_H1940_H
-#define __ASM_ARCH_H1940_H
-
-#define H1940_SUSPEND_CHECKSUM (0x30003ff8)
-#define H1940_SUSPEND_RESUMEAT (0x30081000)
-#define H1940_SUSPEND_CHECK (0x30080000)
-
-extern void h1940_pm_return(void);
-extern int h1940_led_blink_set(unsigned gpio, int state,
- unsigned long *delay_on, unsigned long *delay_off);
-
-
-#endif /* __ASM_ARCH_H1940_H */
diff --git a/arch/arm/mach-s3c24xx/include/mach/hardware.h b/arch/arm/mach-s3c24xx/include/mach/hardware.h
index aef5631..a6cc14a 100644
--- a/arch/arm/mach-s3c24xx/include/mach/hardware.h
+++ b/arch/arm/mach-s3c24xx/include/mach/hardware.h
@@ -23,12 +23,6 @@
#endif /* CONFIG_CPU_S3C2440 */
-#ifdef CONFIG_CPU_S3C2412
-
-extern int s3c2412_gpio_set_sleepcfg(unsigned int pin, unsigned int state);
-
-#endif /* CONFIG_CPU_S3C2412 */
-
#endif /* __ASSEMBLY__ */
#include <asm/sizes.h>
diff --git a/arch/arm/mach-s3c24xx/include/mach/idle.h b/arch/arm/mach-s3c24xx/include/mach/idle.h
deleted file mode 100644
index e9ddd70..0000000
--- a/arch/arm/mach-s3c24xx/include/mach/idle.h
+++ /dev/null
@@ -1,24 +0,0 @@
-/* arch/arm/mach-s3c2410/include/mach/idle.h
- *
- * Copyright (c) 2004 Simtec Electronics <linux@simtec.co.uk>
- * http://www.simtec.co.uk/products/SWLINUX/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * S3C2410 CPU Idle controls
-*/
-
-#ifndef __ASM_ARCH_IDLE_H
-#define __ASM_ARCH_IDLE_H __FILE__
-
-/* This allows the over-ride of the default idle code, in case there
- * is any other things to be done over idle (like DVS)
-*/
-
-extern void (*s3c24xx_idle)(void);
-
-extern void s3c24xx_default_idle(void);
-
-#endif /* __ASM_ARCH_IDLE_H */
diff --git a/arch/arm/mach-s3c24xx/include/mach/osiris-cpld.h b/arch/arm/mach-s3c24xx/include/mach/osiris-cpld.h
deleted file mode 100644
index e9e36b0..0000000
--- a/arch/arm/mach-s3c24xx/include/mach/osiris-cpld.h
+++ /dev/null
@@ -1,30 +0,0 @@
-/* arch/arm/mach-s3c2410/include/mach/osiris-cpld.h
- *
- * Copyright 2005 Simtec Electronics
- * http://www.simtec.co.uk/products/
- * Ben Dooks <ben@simtec.co.uk>
- *
- * OSIRIS - CPLD control constants
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_OSIRISCPLD_H
-#define __ASM_ARCH_OSIRISCPLD_H
-
-/* CTRL0 - NAND WP control */
-
-#define OSIRIS_CTRL0_NANDSEL (0x3)
-#define OSIRIS_CTRL0_BOOT_INT (1<<3)
-#define OSIRIS_CTRL0_PCMCIA (1<<4)
-#define OSIRIS_CTRL0_FIX8 (1<<5)
-#define OSIRIS_CTRL0_PCMCIA_nWAIT (1<<6)
-#define OSIRIS_CTRL0_PCMCIA_nIOIS16 (1<<7)
-
-#define OSIRIS_CTRL1_FIX8 (1<<0)
-
-#define OSIRIS_ID_REVMASK (0x7)
-
-#endif /* __ASM_ARCH_OSIRISCPLD_H */
diff --git a/arch/arm/mach-s3c24xx/include/mach/otom-map.h b/arch/arm/mach-s3c24xx/include/mach/otom-map.h
deleted file mode 100644
index f9277a5..0000000
--- a/arch/arm/mach-s3c24xx/include/mach/otom-map.h
+++ /dev/null
@@ -1,30 +0,0 @@
-/* arch/arm/mach-s3c2410/include/mach/otom-map.h
- *
- * (c) 2005 Guillaume GOURAT / NexVision
- * guillaume.gourat@nexvision.fr
- *
- * NexVision OTOM board memory map definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-/* needs arch/map.h including with this */
-
-/* ok, we've used up to 0x01300000, now we need to find space for the
- * peripherals that live in the nGCS[x] areas, which are quite numerous
- * in their space.
- */
-
-#ifndef __ASM_ARCH_OTOMMAP_H
-#define __ASM_ARCH_OTOMMAP_H
-
-#define OTOM_PA_CS8900A_BASE (S3C2410_CS3 + 0x01000000) /* nGCS3 +0x01000000 */
-#define OTOM_VA_CS8900A_BASE S3C2410_ADDR(0x04000000) /* 0xF4000000 */
-
-/* physical offset addresses for the peripherals */
-
-#define OTOM_PA_FLASH0_BASE (S3C2410_CS0) /* Bank 0 */
-
-#endif /* __ASM_ARCH_OTOMMAP_H */
diff --git a/arch/arm/mach-s3c24xx/include/mach/regs-gpio.h b/arch/arm/mach-s3c24xx/include/mach/regs-gpio.h
index a11a638..c2ef016 100644
--- a/arch/arm/mach-s3c24xx/include/mach/regs-gpio.h
+++ b/arch/arm/mach-s3c24xx/include/mach/regs-gpio.h
@@ -14,8 +14,6 @@
#ifndef __ASM_ARCH_REGS_GPIO_H
#define __ASM_ARCH_REGS_GPIO_H
-#include <mach/gpio-nrs.h>
-
#define S3C24XX_MISCCR S3C24XX_GPIOREG2(0x80)
/* general configuration options */
diff --git a/arch/arm/mach-s3c24xx/include/mach/regs-mem.h b/arch/arm/mach-s3c24xx/include/mach/regs-mem.h
deleted file mode 100644
index e0c67b0..0000000
--- a/arch/arm/mach-s3c24xx/include/mach/regs-mem.h
+++ /dev/null
@@ -1,202 +0,0 @@
-/* arch/arm/mach-s3c2410/include/mach/regs-mem.h
- *
- * Copyright (c) 2004 Simtec Electronics <linux@simtec.co.uk>
- * http://www.simtec.co.uk/products/SWLINUX/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * S3C2410 Memory Control register definitions
-*/
-
-#ifndef __ASM_ARM_MEMREGS_H
-#define __ASM_ARM_MEMREGS_H
-
-#ifndef S3C2410_MEMREG
-#define S3C2410_MEMREG(x) (S3C24XX_VA_MEMCTRL + (x))
-#endif
-
-/* bus width, and wait state control */
-#define S3C2410_BWSCON S3C2410_MEMREG(0x0000)
-
-/* bank zero config - note, pinstrapped from OM pins! */
-#define S3C2410_BWSCON_DW0_16 (1<<1)
-#define S3C2410_BWSCON_DW0_32 (2<<1)
-
-/* bank one configs */
-#define S3C2410_BWSCON_DW1_8 (0<<4)
-#define S3C2410_BWSCON_DW1_16 (1<<4)
-#define S3C2410_BWSCON_DW1_32 (2<<4)
-#define S3C2410_BWSCON_WS1 (1<<6)
-#define S3C2410_BWSCON_ST1 (1<<7)
-
-/* bank 2 configurations */
-#define S3C2410_BWSCON_DW2_8 (0<<8)
-#define S3C2410_BWSCON_DW2_16 (1<<8)
-#define S3C2410_BWSCON_DW2_32 (2<<8)
-#define S3C2410_BWSCON_WS2 (1<<10)
-#define S3C2410_BWSCON_ST2 (1<<11)
-
-/* bank 3 configurations */
-#define S3C2410_BWSCON_DW3_8 (0<<12)
-#define S3C2410_BWSCON_DW3_16 (1<<12)
-#define S3C2410_BWSCON_DW3_32 (2<<12)
-#define S3C2410_BWSCON_WS3 (1<<14)
-#define S3C2410_BWSCON_ST3 (1<<15)
-
-/* bank 4 configurations */
-#define S3C2410_BWSCON_DW4_8 (0<<16)
-#define S3C2410_BWSCON_DW4_16 (1<<16)
-#define S3C2410_BWSCON_DW4_32 (2<<16)
-#define S3C2410_BWSCON_WS4 (1<<18)
-#define S3C2410_BWSCON_ST4 (1<<19)
-
-/* bank 5 configurations */
-#define S3C2410_BWSCON_DW5_8 (0<<20)
-#define S3C2410_BWSCON_DW5_16 (1<<20)
-#define S3C2410_BWSCON_DW5_32 (2<<20)
-#define S3C2410_BWSCON_WS5 (1<<22)
-#define S3C2410_BWSCON_ST5 (1<<23)
-
-/* bank 6 configurations */
-#define S3C2410_BWSCON_DW6_8 (0<<24)
-#define S3C2410_BWSCON_DW6_16 (1<<24)
-#define S3C2410_BWSCON_DW6_32 (2<<24)
-#define S3C2410_BWSCON_WS6 (1<<26)
-#define S3C2410_BWSCON_ST6 (1<<27)
-
-/* bank 7 configurations */
-#define S3C2410_BWSCON_DW7_8 (0<<28)
-#define S3C2410_BWSCON_DW7_16 (1<<28)
-#define S3C2410_BWSCON_DW7_32 (2<<28)
-#define S3C2410_BWSCON_WS7 (1<<30)
-#define S3C2410_BWSCON_ST7 (1<<31)
-
-/* accesor functions for getting BANK(n) configuration. (n != 0) */
-
-#define S3C2410_BWSCON_GET(_bwscon, _bank) (((_bwscon) >> ((_bank) * 4)) & 0xf)
-
-#define S3C2410_BWSCON_DW8 (0)
-#define S3C2410_BWSCON_DW16 (1)
-#define S3C2410_BWSCON_DW32 (2)
-#define S3C2410_BWSCON_WS (1 << 2)
-#define S3C2410_BWSCON_ST (1 << 3)
-
-/* memory set (rom, ram) */
-#define S3C2410_BANKCON0 S3C2410_MEMREG(0x0004)
-#define S3C2410_BANKCON1 S3C2410_MEMREG(0x0008)
-#define S3C2410_BANKCON2 S3C2410_MEMREG(0x000C)
-#define S3C2410_BANKCON3 S3C2410_MEMREG(0x0010)
-#define S3C2410_BANKCON4 S3C2410_MEMREG(0x0014)
-#define S3C2410_BANKCON5 S3C2410_MEMREG(0x0018)
-#define S3C2410_BANKCON6 S3C2410_MEMREG(0x001C)
-#define S3C2410_BANKCON7 S3C2410_MEMREG(0x0020)
-
-/* bank configuration registers */
-
-#define S3C2410_BANKCON_PMCnorm (0x00)
-#define S3C2410_BANKCON_PMC4 (0x01)
-#define S3C2410_BANKCON_PMC8 (0x02)
-#define S3C2410_BANKCON_PMC16 (0x03)
-
-/* bank configurations for banks 0..7, note banks
- * 6 and 7 have different configurations depending on
- * the memory type bits */
-
-#define S3C2410_BANKCON_Tacp2 (0x0 << 2)
-#define S3C2410_BANKCON_Tacp3 (0x1 << 2)
-#define S3C2410_BANKCON_Tacp4 (0x2 << 2)
-#define S3C2410_BANKCON_Tacp6 (0x3 << 2)
-#define S3C2410_BANKCON_Tacp_SHIFT (2)
-
-#define S3C2410_BANKCON_Tcah0 (0x0 << 4)
-#define S3C2410_BANKCON_Tcah1 (0x1 << 4)
-#define S3C2410_BANKCON_Tcah2 (0x2 << 4)
-#define S3C2410_BANKCON_Tcah4 (0x3 << 4)
-#define S3C2410_BANKCON_Tcah_SHIFT (4)
-
-#define S3C2410_BANKCON_Tcoh0 (0x0 << 6)
-#define S3C2410_BANKCON_Tcoh1 (0x1 << 6)
-#define S3C2410_BANKCON_Tcoh2 (0x2 << 6)
-#define S3C2410_BANKCON_Tcoh4 (0x3 << 6)
-#define S3C2410_BANKCON_Tcoh_SHIFT (6)
-
-#define S3C2410_BANKCON_Tacc1 (0x0 << 8)
-#define S3C2410_BANKCON_Tacc2 (0x1 << 8)
-#define S3C2410_BANKCON_Tacc3 (0x2 << 8)
-#define S3C2410_BANKCON_Tacc4 (0x3 << 8)
-#define S3C2410_BANKCON_Tacc6 (0x4 << 8)
-#define S3C2410_BANKCON_Tacc8 (0x5 << 8)
-#define S3C2410_BANKCON_Tacc10 (0x6 << 8)
-#define S3C2410_BANKCON_Tacc14 (0x7 << 8)
-#define S3C2410_BANKCON_Tacc_SHIFT (8)
-
-#define S3C2410_BANKCON_Tcos0 (0x0 << 11)
-#define S3C2410_BANKCON_Tcos1 (0x1 << 11)
-#define S3C2410_BANKCON_Tcos2 (0x2 << 11)
-#define S3C2410_BANKCON_Tcos4 (0x3 << 11)
-#define S3C2410_BANKCON_Tcos_SHIFT (11)
-
-#define S3C2410_BANKCON_Tacs0 (0x0 << 13)
-#define S3C2410_BANKCON_Tacs1 (0x1 << 13)
-#define S3C2410_BANKCON_Tacs2 (0x2 << 13)
-#define S3C2410_BANKCON_Tacs4 (0x3 << 13)
-#define S3C2410_BANKCON_Tacs_SHIFT (13)
-
-#define S3C2410_BANKCON_SRAM (0x0 << 15)
-#define S3C2410_BANKCON_SDRAM (0x3 << 15)
-
-/* next bits only for SDRAM in 6,7 */
-#define S3C2410_BANKCON_Trcd2 (0x00 << 2)
-#define S3C2410_BANKCON_Trcd3 (0x01 << 2)
-#define S3C2410_BANKCON_Trcd4 (0x02 << 2)
-
-/* control column address select */
-#define S3C2410_BANKCON_SCANb8 (0x00 << 0)
-#define S3C2410_BANKCON_SCANb9 (0x01 << 0)
-#define S3C2410_BANKCON_SCANb10 (0x02 << 0)
-
-#define S3C2410_REFRESH S3C2410_MEMREG(0x0024)
-#define S3C2410_BANKSIZE S3C2410_MEMREG(0x0028)
-#define S3C2410_MRSRB6 S3C2410_MEMREG(0x002C)
-#define S3C2410_MRSRB7 S3C2410_MEMREG(0x0030)
-
-/* refresh control */
-
-#define S3C2410_REFRESH_REFEN (1<<23)
-#define S3C2410_REFRESH_SELF (1<<22)
-#define S3C2410_REFRESH_REFCOUNTER ((1<<11)-1)
-
-#define S3C2410_REFRESH_TRP_MASK (3<<20)
-#define S3C2410_REFRESH_TRP_2clk (0<<20)
-#define S3C2410_REFRESH_TRP_3clk (1<<20)
-#define S3C2410_REFRESH_TRP_4clk (2<<20)
-
-#define S3C2410_REFRESH_TSRC_MASK (3<<18)
-#define S3C2410_REFRESH_TSRC_4clk (0<<18)
-#define S3C2410_REFRESH_TSRC_5clk (1<<18)
-#define S3C2410_REFRESH_TSRC_6clk (2<<18)
-#define S3C2410_REFRESH_TSRC_7clk (3<<18)
-
-
-/* mode select register(s) */
-
-#define S3C2410_MRSRB_CL1 (0x00 << 4)
-#define S3C2410_MRSRB_CL2 (0x02 << 4)
-#define S3C2410_MRSRB_CL3 (0x03 << 4)
-
-/* bank size register */
-#define S3C2410_BANKSIZE_128M (0x2 << 0)
-#define S3C2410_BANKSIZE_64M (0x1 << 0)
-#define S3C2410_BANKSIZE_32M (0x0 << 0)
-#define S3C2410_BANKSIZE_16M (0x7 << 0)
-#define S3C2410_BANKSIZE_8M (0x6 << 0)
-#define S3C2410_BANKSIZE_4M (0x5 << 0)
-#define S3C2410_BANKSIZE_2M (0x4 << 0)
-#define S3C2410_BANKSIZE_MASK (0x7 << 0)
-#define S3C2410_BANKSIZE_SCLK_EN (1<<4)
-#define S3C2410_BANKSIZE_SCKE_EN (1<<5)
-#define S3C2410_BANKSIZE_BURST (1<<7)
-
-#endif /* __ASM_ARM_MEMREGS_H */
diff --git a/arch/arm/mach-s3c24xx/include/mach/regs-power.h b/arch/arm/mach-s3c24xx/include/mach/regs-power.h
deleted file mode 100644
index 4932b87..0000000
--- a/arch/arm/mach-s3c24xx/include/mach/regs-power.h
+++ /dev/null
@@ -1,40 +0,0 @@
-/* arch/arm/mach-s3c2410/include/mach/regs-power.h
- *
- * Copyright (c) 2003-2006 Simtec Electronics <linux@simtec.co.uk>
- * http://armlinux.simtec.co.uk/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * S3C24XX power control register definitions
-*/
-
-#ifndef __ASM_ARM_REGS_PWR
-#define __ASM_ARM_REGS_PWR __FILE__
-
-#define S3C24XX_PWRREG(x) ((x) + S3C24XX_VA_CLKPWR)
-
-#define S3C2412_PWRMODECON S3C24XX_PWRREG(0x20)
-#define S3C2412_PWRCFG S3C24XX_PWRREG(0x24)
-
-#define S3C2412_INFORM0 S3C24XX_PWRREG(0x70)
-#define S3C2412_INFORM1 S3C24XX_PWRREG(0x74)
-#define S3C2412_INFORM2 S3C24XX_PWRREG(0x78)
-#define S3C2412_INFORM3 S3C24XX_PWRREG(0x7C)
-
-#define S3C2412_PWRCFG_BATF_IRQ (1<<0)
-#define S3C2412_PWRCFG_BATF_IGNORE (2<<0)
-#define S3C2412_PWRCFG_BATF_SLEEP (3<<0)
-#define S3C2412_PWRCFG_BATF_MASK (3<<0)
-
-#define S3C2412_PWRCFG_STANDBYWFI_IGNORE (0<<6)
-#define S3C2412_PWRCFG_STANDBYWFI_IDLE (1<<6)
-#define S3C2412_PWRCFG_STANDBYWFI_STOP (2<<6)
-#define S3C2412_PWRCFG_STANDBYWFI_SLEEP (3<<6)
-#define S3C2412_PWRCFG_STANDBYWFI_MASK (3<<6)
-
-#define S3C2412_PWRCFG_RTC_MASKIRQ (1<<8)
-#define S3C2412_PWRCFG_NAND_NORST (1<<9)
-
-#endif /* __ASM_ARM_REGS_PWR */
diff --git a/arch/arm/mach-s3c24xx/include/mach/regs-s3c2412-mem.h b/arch/arm/mach-s3c24xx/include/mach/regs-s3c2412-mem.h
deleted file mode 100644
index fb63525..0000000
--- a/arch/arm/mach-s3c24xx/include/mach/regs-s3c2412-mem.h
+++ /dev/null
@@ -1,48 +0,0 @@
-/* arch/arm/mach-s3c2410/include/mach/regs-s3c2412-mem.h
- *
- * Copyright (c) 2008 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- * http://armlinux.simtec.co.uk/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * S3C2412 memory register definitions
-*/
-
-#ifndef __ASM_ARM_REGS_S3C2412_MEM
-#define __ASM_ARM_REGS_S3C2412_MEM
-
-#define S3C2412_MEMREG(x) (S3C24XX_VA_MEMCTRL + (x))
-#define S3C2412_EBIREG(x) (S3C2412_VA_EBI + (x))
-
-#define S3C2412_SSMCREG(x) (S3C2412_VA_SSMC + (x))
-#define S3C2412_SSMC(x, o) (S3C2412_SSMCREG((x * 0x20) + (o)))
-
-#define S3C2412_BANKCFG S3C2412_MEMREG(0x00)
-#define S3C2412_BANKCON1 S3C2412_MEMREG(0x04)
-#define S3C2412_BANKCON2 S3C2412_MEMREG(0x08)
-#define S3C2412_BANKCON3 S3C2412_MEMREG(0x0C)
-
-#define S3C2412_REFRESH S3C2412_MEMREG(0x10)
-#define S3C2412_TIMEOUT S3C2412_MEMREG(0x14)
-
-/* EBI control registers */
-
-#define S3C2412_EBI_PR S3C2412_EBIREG(0x00)
-#define S3C2412_EBI_BANKCFG S3C2412_EBIREG(0x04)
-
-/* SSMC control registers */
-
-#define S3C2412_SSMC_BANK(x) S3C2412_SSMC(x, 0x00)
-#define S3C2412_SMIDCYR(x) S3C2412_SSMC(x, 0x00)
-#define S3C2412_SMBWSTRD(x) S3C2412_SSMC(x, 0x04)
-#define S3C2412_SMBWSTWRR(x) S3C2412_SSMC(x, 0x08)
-#define S3C2412_SMBWSTOENR(x) S3C2412_SSMC(x, 0x0C)
-#define S3C2412_SMBWSTWENR(x) S3C2412_SSMC(x, 0x10)
-#define S3C2412_SMBCR(x) S3C2412_SSMC(x, 0x14)
-#define S3C2412_SMBSR(x) S3C2412_SSMC(x, 0x18)
-#define S3C2412_SMBWSTBRDR(x) S3C2412_SSMC(x, 0x1C)
-
-#endif /* __ASM_ARM_REGS_S3C2412_MEM */
diff --git a/arch/arm/mach-s3c24xx/include/mach/regs-s3c2412.h b/arch/arm/mach-s3c24xx/include/mach/regs-s3c2412.h
deleted file mode 100644
index aa69dc7..0000000
--- a/arch/arm/mach-s3c24xx/include/mach/regs-s3c2412.h
+++ /dev/null
@@ -1,23 +0,0 @@
-/* arch/arm/mach-s3c2410/include/mach/regs-s3c2412.h
- *
- * Copyright 2007 Simtec Electronics
- * http://armlinux.simtec.co.uk/
- * Ben Dooks <ben@simtec.co.uk>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * S3C2412 specific register definitions
-*/
-
-#ifndef __ASM_ARCH_REGS_S3C2412_H
-#define __ASM_ARCH_REGS_S3C2412_H "s3c2412"
-
-#define S3C2412_SWRST (S3C24XX_VA_CLKPWR + 0x30)
-#define S3C2412_SWRST_RESET (0x533C2412)
-
-/* see regs-power.h for the other registers in the power block. */
-
-#endif /* __ASM_ARCH_REGS_S3C2412_H */
-
diff --git a/arch/arm/mach-s3c24xx/include/mach/regs-s3c2416-mem.h b/arch/arm/mach-s3c24xx/include/mach/regs-s3c2416-mem.h
deleted file mode 100644
index 2f31b74..0000000
--- a/arch/arm/mach-s3c24xx/include/mach/regs-s3c2416-mem.h
+++ /dev/null
@@ -1,30 +0,0 @@
-/* arch/arm/mach-s3c2410/include/mach/regs-s3c2416-mem.h
- *
- * Copyright (c) 2009 Yauhen Kharuzhy <jekhor@gmail.com>,
- * as part of OpenInkpot project
- * Copyright (c) 2009 Promwad Innovation Company
- * Yauhen Kharuzhy <yauhen.kharuzhy@promwad.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * S3C2416 memory register definitions
-*/
-
-#ifndef __ASM_ARM_REGS_S3C2416_MEM
-#define __ASM_ARM_REGS_S3C2416_MEM
-
-#ifndef S3C2416_MEMREG
-#define S3C2416_MEMREG(x) (S3C24XX_VA_MEMCTRL + (x))
-#endif
-
-#define S3C2416_BANKCFG S3C2416_MEMREG(0x00)
-#define S3C2416_BANKCON1 S3C2416_MEMREG(0x04)
-#define S3C2416_BANKCON2 S3C2416_MEMREG(0x08)
-#define S3C2416_BANKCON3 S3C2416_MEMREG(0x0C)
-
-#define S3C2416_REFRESH S3C2416_MEMREG(0x10)
-#define S3C2416_TIMEOUT S3C2416_MEMREG(0x14)
-
-#endif /* __ASM_ARM_REGS_S3C2416_MEM */
diff --git a/arch/arm/mach-s3c24xx/include/mach/regs-s3c2416.h b/arch/arm/mach-s3c24xx/include/mach/regs-s3c2416.h
deleted file mode 100644
index e443167..0000000
--- a/arch/arm/mach-s3c24xx/include/mach/regs-s3c2416.h
+++ /dev/null
@@ -1,24 +0,0 @@
-/* arch/arm/mach-s3c2410/include/mach/regs-s3c2416.h
- *
- * Copyright (c) 2009 Yauhen Kharuzhy <jekhor@gmail.com>,
- * as part of OpenInkpot project
- * Copyright (c) 2009 Promwad Innovation Company
- * Yauhen Kharuzhy <yauhen.kharuzhy@promwad.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * S3C2416 specific register definitions
-*/
-
-#ifndef __ASM_ARCH_REGS_S3C2416_H
-#define __ASM_ARCH_REGS_S3C2416_H "s3c2416"
-
-#define S3C2416_SWRST (S3C24XX_VA_CLKPWR + 0x44)
-#define S3C2416_SWRST_RESET (0x533C2416)
-
-/* see regs-power.h for the other registers in the power block. */
-
-#endif /* __ASM_ARCH_REGS_S3C2416_H */
-
diff --git a/arch/arm/mach-s3c24xx/include/mach/vr1000-cpld.h b/arch/arm/mach-s3c24xx/include/mach/vr1000-cpld.h
deleted file mode 100644
index e411991..0000000
--- a/arch/arm/mach-s3c24xx/include/mach/vr1000-cpld.h
+++ /dev/null
@@ -1,18 +0,0 @@
-/* arch/arm/mach-s3c2410/include/mach/vr1000-cpld.h
- *
- * Copyright (c) 2003 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- *
- * VR1000 - CPLD control constants
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_VR1000CPLD_H
-#define __ASM_ARCH_VR1000CPLD_H
-
-#define VR1000_CPLD_CTRL2_RAMWEN (0x04) /* SRAM Write Enable */
-
-#endif /* __ASM_ARCH_VR1000CPLD_H */
diff --git a/arch/arm/mach-s3c24xx/include/mach/vr1000-irq.h b/arch/arm/mach-s3c24xx/include/mach/vr1000-irq.h
deleted file mode 100644
index 47add13..0000000
--- a/arch/arm/mach-s3c24xx/include/mach/vr1000-irq.h
+++ /dev/null
@@ -1,26 +0,0 @@
-/* arch/arm/mach-s3c2410/include/mach/vr1000-irq.h
- *
- * Copyright (c) 2003-2004 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- *
- * Machine VR1000 - IRQ Number definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_VR1000IRQ_H
-#define __ASM_ARCH_VR1000IRQ_H
-
-/* irq numbers to onboard peripherals */
-
-#define IRQ_USBOC IRQ_EINT19
-#define IRQ_IDE0 IRQ_EINT16
-#define IRQ_IDE1 IRQ_EINT17
-#define IRQ_VR1000_SERIAL IRQ_EINT12
-#define IRQ_VR1000_DM9000A IRQ_EINT10
-#define IRQ_VR1000_DM9000N IRQ_EINT9
-#define IRQ_SMALERT IRQ_EINT8
-
-#endif /* __ASM_ARCH_VR1000IRQ_H */
diff --git a/arch/arm/mach-s3c24xx/include/mach/vr1000-map.h b/arch/arm/mach-s3c24xx/include/mach/vr1000-map.h
deleted file mode 100644
index 28376e5..0000000
--- a/arch/arm/mach-s3c24xx/include/mach/vr1000-map.h
+++ /dev/null
@@ -1,110 +0,0 @@
-/* arch/arm/mach-s3c2410/include/mach/vr1000-map.h
- *
- * Copyright (c) 2003-2005 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- *
- * Machine VR1000 - Memory map definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-/* needs arch/map.h including with this */
-
-/* ok, we've used up to 0x13000000, now we need to find space for the
- * peripherals that live in the nGCS[x] areas, which are quite numerous
- * in their space. We also have the board's CPLD to find register space
- * for.
- */
-
-#ifndef __ASM_ARCH_VR1000MAP_H
-#define __ASM_ARCH_VR1000MAP_H
-
-#include <mach/bast-map.h>
-
-#define VR1000_IOADDR(x) BAST_IOADDR(x)
-
-/* we put the CPLD registers next, to get them out of the way */
-
-#define VR1000_VA_CTRL1 VR1000_IOADDR(0x00000000) /* 0x01300000 */
-#define VR1000_PA_CTRL1 (S3C2410_CS5 | 0x7800000)
-
-#define VR1000_VA_CTRL2 VR1000_IOADDR(0x00100000) /* 0x01400000 */
-#define VR1000_PA_CTRL2 (S3C2410_CS1 | 0x6000000)
-
-#define VR1000_VA_CTRL3 VR1000_IOADDR(0x00200000) /* 0x01500000 */
-#define VR1000_PA_CTRL3 (S3C2410_CS1 | 0x6800000)
-
-#define VR1000_VA_CTRL4 VR1000_IOADDR(0x00300000) /* 0x01600000 */
-#define VR1000_PA_CTRL4 (S3C2410_CS1 | 0x7000000)
-
-/* next, we have the PC104 ISA interrupt registers */
-
-#define VR1000_PA_PC104_IRQREQ (S3C2410_CS5 | 0x6000000) /* 0x01700000 */
-#define VR1000_VA_PC104_IRQREQ VR1000_IOADDR(0x00400000)
-
-#define VR1000_PA_PC104_IRQRAW (S3C2410_CS5 | 0x6800000) /* 0x01800000 */
-#define VR1000_VA_PC104_IRQRAW VR1000_IOADDR(0x00500000)
-
-#define VR1000_PA_PC104_IRQMASK (S3C2410_CS5 | 0x7000000) /* 0x01900000 */
-#define VR1000_VA_PC104_IRQMASK VR1000_IOADDR(0x00600000)
-
-/* 0xE0000000 contains the IO space that is split by speed and
- * whether the access is for 8 or 16bit IO... this ensures that
- * the correct access is made
- *
- * 0x10000000 of space, partitioned as so:
- *
- * 0x00000000 to 0x04000000 8bit, slow
- * 0x04000000 to 0x08000000 16bit, slow
- * 0x08000000 to 0x0C000000 16bit, net
- * 0x0C000000 to 0x10000000 16bit, fast
- *
- * each of these spaces has the following in:
- *
- * 0x02000000 to 0x02100000 1MB IDE primary channel
- * 0x02100000 to 0x02200000 1MB IDE primary channel aux
- * 0x02200000 to 0x02400000 1MB IDE secondary channel
- * 0x02300000 to 0x02400000 1MB IDE secondary channel aux
- * 0x02500000 to 0x02600000 1MB Davicom DM9000 ethernet controllers
- * 0x02600000 to 0x02700000 1MB
- *
- * the phyiscal layout of the zones are:
- * nGCS2 - 8bit, slow
- * nGCS3 - 16bit, slow
- * nGCS4 - 16bit, net
- * nGCS5 - 16bit, fast
- */
-
-#define VR1000_VA_MULTISPACE (0xE0000000)
-
-#define VR1000_VA_ISAIO (VR1000_VA_MULTISPACE + 0x00000000)
-#define VR1000_VA_ISAMEM (VR1000_VA_MULTISPACE + 0x01000000)
-#define VR1000_VA_IDEPRI (VR1000_VA_MULTISPACE + 0x02000000)
-#define VR1000_VA_IDEPRIAUX (VR1000_VA_MULTISPACE + 0x02100000)
-#define VR1000_VA_IDESEC (VR1000_VA_MULTISPACE + 0x02200000)
-#define VR1000_VA_IDESECAUX (VR1000_VA_MULTISPACE + 0x02300000)
-#define VR1000_VA_ASIXNET (VR1000_VA_MULTISPACE + 0x02400000)
-#define VR1000_VA_DM9000 (VR1000_VA_MULTISPACE + 0x02500000)
-#define VR1000_VA_SUPERIO (VR1000_VA_MULTISPACE + 0x02600000)
-
-/* physical offset addresses for the peripherals */
-
-#define VR1000_PA_IDEPRI (0x02000000)
-#define VR1000_PA_IDEPRIAUX (0x02800000)
-#define VR1000_PA_IDESEC (0x03000000)
-#define VR1000_PA_IDESECAUX (0x03800000)
-#define VR1000_PA_DM9000 (0x05000000)
-
-#define VR1000_PA_SERIAL (0x11800000)
-#define VR1000_VA_SERIAL (VR1000_IOADDR(0x00700000))
-
-/* VR1000 ram is in CS1, with A26..A24 = 2_101 */
-#define VR1000_PA_SRAM (S3C2410_CS1 | 0x05000000)
-
-/* some configurations for the peripherals */
-
-#define VR1000_DM9000_CS VR1000_VAM_CS4
-
-#endif /* __ASM_ARCH_VR1000MAP_H */
diff --git a/arch/arm/plat-s3c24xx/s3c2410-iotiming.c b/arch/arm/mach-s3c24xx/iotiming-s3c2410.c
similarity index 98%
rename from arch/arm/plat-s3c24xx/s3c2410-iotiming.c
rename to arch/arm/mach-s3c24xx/iotiming-s3c2410.c
index b1908e5..4cd13ab 100644
--- a/arch/arm/plat-s3c24xx/s3c2410-iotiming.c
+++ b/arch/arm/mach-s3c24xx/iotiming-s3c2410.c
@@ -1,5 +1,4 @@
-/* linux/arch/arm/plat-s3c24xx/s3c2410-iotiming.c
- *
+/*
* Copyright (c) 2006-2009 Simtec Electronics
* http://armlinux.simtec.co.uk/
* Ben Dooks <ben@simtec.co.uk>
@@ -20,11 +19,12 @@
#include <linux/slab.h>
#include <mach/map.h>
-#include <mach/regs-mem.h>
#include <mach/regs-clock.h>
#include <plat/cpu-freq-core.h>
+#include "regs-mem.h"
+
#define print_ns(x) ((x) / 10), ((x) % 10)
/**
diff --git a/arch/arm/plat-s3c24xx/s3c2412-iotiming.c b/arch/arm/mach-s3c24xx/iotiming-s3c2412.c
similarity index 98%
rename from arch/arm/plat-s3c24xx/s3c2412-iotiming.c
rename to arch/arm/mach-s3c24xx/iotiming-s3c2412.c
index 48eee39..663436d 100644
--- a/arch/arm/plat-s3c24xx/s3c2412-iotiming.c
+++ b/arch/arm/mach-s3c24xx/iotiming-s3c2412.c
@@ -1,5 +1,4 @@
-/* linux/arch/arm/plat-s3c24xx/s3c2412-iotiming.c
- *
+/*
* Copyright (c) 2006-2008 Simtec Electronics
* http://armlinux.simtec.co.uk/
* Ben Dooks <ben@simtec.co.uk>
@@ -28,12 +27,12 @@
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
-#include <mach/regs-s3c2412-mem.h>
-
#include <plat/cpu.h>
#include <plat/cpu-freq-core.h>
#include <plat/clock.h>
+#include "s3c2412.h"
+
#define print_ns(x) ((x) / 10), ((x) % 10)
/**
diff --git a/arch/arm/mach-s3c24xx/irq-pm.c b/arch/arm/mach-s3c24xx/irq-pm.c
index 0efb2e2..e119959 100644
--- a/arch/arm/mach-s3c24xx/irq-pm.c
+++ b/arch/arm/mach-s3c24xx/irq-pm.c
@@ -15,6 +15,7 @@
#include <linux/module.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
+#include <linux/syscore_ops.h>
#include <plat/cpu.h>
#include <plat/pm.h>
@@ -29,18 +30,18 @@
* set bit to 1 in allow bitfield to enable the wakeup settings on it
*/
-unsigned long s3c_irqwake_intallow = 1L << (IRQ_RTC - IRQ_EINT0) | 0xfL;
+unsigned long s3c_irqwake_intallow = 1L << 30 | 0xfL;
unsigned long s3c_irqwake_eintallow = 0x0000fff0L;
int s3c_irq_wake(struct irq_data *data, unsigned int state)
{
- unsigned long irqbit = 1 << (data->irq - IRQ_EINT0);
+ unsigned long irqbit = 1 << data->hwirq;
if (!(s3c_irqwake_intallow & irqbit))
return -ENOENT;
- printk(KERN_INFO "wake %s for irq %d\n",
- state ? "enabled" : "disabled", data->irq);
+ pr_info("wake %s for hwirq %lu\n",
+ state ? "enabled" : "disabled", data->hwirq);
if (!state)
s3c_irqwake_intmask |= irqbit;
@@ -64,7 +65,7 @@
static unsigned long save_eintflt[4];
static unsigned long save_eintmask;
-int s3c24xx_irq_suspend(void)
+static int s3c24xx_irq_suspend(void)
{
unsigned int i;
@@ -80,7 +81,7 @@
return 0;
}
-void s3c24xx_irq_resume(void)
+static void s3c24xx_irq_resume(void)
{
unsigned int i;
@@ -93,3 +94,31 @@
s3c_pm_do_restore(irq_save, ARRAY_SIZE(irq_save));
__raw_writel(save_eintmask, S3C24XX_EINTMASK);
}
+
+struct syscore_ops s3c24xx_irq_syscore_ops = {
+ .suspend = s3c24xx_irq_suspend,
+ .resume = s3c24xx_irq_resume,
+};
+
+#ifdef CONFIG_CPU_S3C2416
+static struct sleep_save s3c2416_irq_save[] = {
+ SAVE_ITEM(S3C2416_INTMSK2),
+};
+
+static int s3c2416_irq_suspend(void)
+{
+ s3c_pm_do_save(s3c2416_irq_save, ARRAY_SIZE(s3c2416_irq_save));
+
+ return 0;
+}
+
+static void s3c2416_irq_resume(void)
+{
+ s3c_pm_do_restore(s3c2416_irq_save, ARRAY_SIZE(s3c2416_irq_save));
+}
+
+struct syscore_ops s3c2416_irq_syscore_ops = {
+ .suspend = s3c2416_irq_suspend,
+ .resume = s3c2416_irq_resume,
+};
+#endif
diff --git a/arch/arm/mach-s3c24xx/irq-s3c2412.c b/arch/arm/mach-s3c24xx/irq-s3c2412.c
index e65619d..67d7631 100644
--- a/arch/arm/mach-s3c24xx/irq-s3c2412.c
+++ b/arch/arm/mach-s3c24xx/irq-s3c2412.c
@@ -33,12 +33,13 @@
#include <mach/regs-irq.h>
#include <mach/regs-gpio.h>
-#include <mach/regs-power.h>
#include <plat/cpu.h>
#include <plat/irq.h>
#include <plat/pm.h>
+#include "s3c2412-power.h"
+
#define INTMSK(start, end) ((1 << ((end) + 1 - (start))) - 1)
#define INTMSK_SUB(start, end) (INTMSK(start, end) << ((start - S3C2410_IRQSUB(0))))
diff --git a/arch/arm/mach-s3c24xx/irq-s3c2416.c b/arch/arm/mach-s3c24xx/irq-s3c2416.c
deleted file mode 100644
index ff141b0..0000000
--- a/arch/arm/mach-s3c24xx/irq-s3c2416.c
+++ /dev/null
@@ -1,348 +0,0 @@
-/* linux/arch/arm/mach-s3c2416/irq.c
- *
- * Copyright (c) 2009 Yauhen Kharuzhy <jekhor@gmail.com>,
- * as part of OpenInkpot project
- * Copyright (c) 2009 Promwad Innovation Company
- * Yauhen Kharuzhy <yauhen.kharuzhy@promwad.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
-*/
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/device.h>
-#include <linux/io.h>
-#include <linux/syscore_ops.h>
-
-#include <mach/hardware.h>
-#include <asm/irq.h>
-
-#include <asm/mach/irq.h>
-
-#include <mach/regs-irq.h>
-#include <mach/regs-gpio.h>
-
-#include <plat/cpu.h>
-#include <plat/pm.h>
-#include <plat/irq.h>
-
-#define INTMSK(start, end) ((1 << ((end) + 1 - (start))) - 1)
-
-static inline void s3c2416_irq_demux(unsigned int irq, unsigned int len)
-{
- unsigned int subsrc, submsk;
- unsigned int end;
-
- /* read the current pending interrupts, and the mask
- * for what it is available */
-
- subsrc = __raw_readl(S3C2410_SUBSRCPND);
- submsk = __raw_readl(S3C2410_INTSUBMSK);
-
- subsrc &= ~submsk;
- subsrc >>= (irq - S3C2410_IRQSUB(0));
- subsrc &= (1 << len)-1;
-
- end = len + irq;
-
- for (; irq < end && subsrc; irq++) {
- if (subsrc & 1)
- generic_handle_irq(irq);
-
- subsrc >>= 1;
- }
-}
-
-/* WDT/AC97 sub interrupts */
-
-static void s3c2416_irq_demux_wdtac97(unsigned int irq, struct irq_desc *desc)
-{
- s3c2416_irq_demux(IRQ_S3C2443_WDT, 4);
-}
-
-#define INTMSK_WDTAC97 (1UL << (IRQ_WDT - IRQ_EINT0))
-#define SUBMSK_WDTAC97 INTMSK(IRQ_S3C2443_WDT, IRQ_S3C2443_AC97)
-
-static void s3c2416_irq_wdtac97_mask(struct irq_data *data)
-{
- s3c_irqsub_mask(data->irq, INTMSK_WDTAC97, SUBMSK_WDTAC97);
-}
-
-static void s3c2416_irq_wdtac97_unmask(struct irq_data *data)
-{
- s3c_irqsub_unmask(data->irq, INTMSK_WDTAC97);
-}
-
-static void s3c2416_irq_wdtac97_ack(struct irq_data *data)
-{
- s3c_irqsub_maskack(data->irq, INTMSK_WDTAC97, SUBMSK_WDTAC97);
-}
-
-static struct irq_chip s3c2416_irq_wdtac97 = {
- .irq_mask = s3c2416_irq_wdtac97_mask,
- .irq_unmask = s3c2416_irq_wdtac97_unmask,
- .irq_ack = s3c2416_irq_wdtac97_ack,
-};
-
-/* LCD sub interrupts */
-
-static void s3c2416_irq_demux_lcd(unsigned int irq, struct irq_desc *desc)
-{
- s3c2416_irq_demux(IRQ_S3C2443_LCD1, 4);
-}
-
-#define INTMSK_LCD (1UL << (IRQ_LCD - IRQ_EINT0))
-#define SUBMSK_LCD INTMSK(IRQ_S3C2443_LCD1, IRQ_S3C2443_LCD4)
-
-static void s3c2416_irq_lcd_mask(struct irq_data *data)
-{
- s3c_irqsub_mask(data->irq, INTMSK_LCD, SUBMSK_LCD);
-}
-
-static void s3c2416_irq_lcd_unmask(struct irq_data *data)
-{
- s3c_irqsub_unmask(data->irq, INTMSK_LCD);
-}
-
-static void s3c2416_irq_lcd_ack(struct irq_data *data)
-{
- s3c_irqsub_maskack(data->irq, INTMSK_LCD, SUBMSK_LCD);
-}
-
-static struct irq_chip s3c2416_irq_lcd = {
- .irq_mask = s3c2416_irq_lcd_mask,
- .irq_unmask = s3c2416_irq_lcd_unmask,
- .irq_ack = s3c2416_irq_lcd_ack,
-};
-
-/* DMA sub interrupts */
-
-static void s3c2416_irq_demux_dma(unsigned int irq, struct irq_desc *desc)
-{
- s3c2416_irq_demux(IRQ_S3C2443_DMA0, 6);
-}
-
-#define INTMSK_DMA (1UL << (IRQ_S3C2443_DMA - IRQ_EINT0))
-#define SUBMSK_DMA INTMSK(IRQ_S3C2443_DMA0, IRQ_S3C2443_DMA5)
-
-
-static void s3c2416_irq_dma_mask(struct irq_data *data)
-{
- s3c_irqsub_mask(data->irq, INTMSK_DMA, SUBMSK_DMA);
-}
-
-static void s3c2416_irq_dma_unmask(struct irq_data *data)
-{
- s3c_irqsub_unmask(data->irq, INTMSK_DMA);
-}
-
-static void s3c2416_irq_dma_ack(struct irq_data *data)
-{
- s3c_irqsub_maskack(data->irq, INTMSK_DMA, SUBMSK_DMA);
-}
-
-static struct irq_chip s3c2416_irq_dma = {
- .irq_mask = s3c2416_irq_dma_mask,
- .irq_unmask = s3c2416_irq_dma_unmask,
- .irq_ack = s3c2416_irq_dma_ack,
-};
-
-/* UART3 sub interrupts */
-
-static void s3c2416_irq_demux_uart3(unsigned int irq, struct irq_desc *desc)
-{
- s3c2416_irq_demux(IRQ_S3C2443_RX3, 3);
-}
-
-#define INTMSK_UART3 (1UL << (IRQ_S3C2443_UART3 - IRQ_EINT0))
-#define SUBMSK_UART3 (0x7 << (IRQ_S3C2443_RX3 - S3C2410_IRQSUB(0)))
-
-static void s3c2416_irq_uart3_mask(struct irq_data *data)
-{
- s3c_irqsub_mask(data->irq, INTMSK_UART3, SUBMSK_UART3);
-}
-
-static void s3c2416_irq_uart3_unmask(struct irq_data *data)
-{
- s3c_irqsub_unmask(data->irq, INTMSK_UART3);
-}
-
-static void s3c2416_irq_uart3_ack(struct irq_data *data)
-{
- s3c_irqsub_maskack(data->irq, INTMSK_UART3, SUBMSK_UART3);
-}
-
-static struct irq_chip s3c2416_irq_uart3 = {
- .irq_mask = s3c2416_irq_uart3_mask,
- .irq_unmask = s3c2416_irq_uart3_unmask,
- .irq_ack = s3c2416_irq_uart3_ack,
-};
-
-/* second interrupt register */
-
-static inline void s3c2416_irq_ack_second(struct irq_data *data)
-{
- unsigned long bitval = 1UL << (data->irq - IRQ_S3C2416_2D);
-
- __raw_writel(bitval, S3C2416_SRCPND2);
- __raw_writel(bitval, S3C2416_INTPND2);
-}
-
-static void s3c2416_irq_mask_second(struct irq_data *data)
-{
- unsigned long bitval = 1UL << (data->irq - IRQ_S3C2416_2D);
- unsigned long mask;
-
- mask = __raw_readl(S3C2416_INTMSK2);
- mask |= bitval;
- __raw_writel(mask, S3C2416_INTMSK2);
-}
-
-static void s3c2416_irq_unmask_second(struct irq_data *data)
-{
- unsigned long bitval = 1UL << (data->irq - IRQ_S3C2416_2D);
- unsigned long mask;
-
- mask = __raw_readl(S3C2416_INTMSK2);
- mask &= ~bitval;
- __raw_writel(mask, S3C2416_INTMSK2);
-}
-
-struct irq_chip s3c2416_irq_second = {
- .irq_ack = s3c2416_irq_ack_second,
- .irq_mask = s3c2416_irq_mask_second,
- .irq_unmask = s3c2416_irq_unmask_second,
-};
-
-
-/* IRQ initialisation code */
-
-static int s3c2416_add_sub(unsigned int base,
- void (*demux)(unsigned int,
- struct irq_desc *),
- struct irq_chip *chip,
- unsigned int start, unsigned int end)
-{
- unsigned int irqno;
-
- irq_set_chip_and_handler(base, &s3c_irq_level_chip, handle_level_irq);
- irq_set_chained_handler(base, demux);
-
- for (irqno = start; irqno <= end; irqno++) {
- irq_set_chip_and_handler(irqno, chip, handle_level_irq);
- set_irq_flags(irqno, IRQF_VALID);
- }
-
- return 0;
-}
-
-static void s3c2416_irq_add_second(void)
-{
- unsigned long pend;
- unsigned long last;
- int irqno;
- int i;
-
- /* first, clear all interrupts pending... */
- last = 0;
- for (i = 0; i < 4; i++) {
- pend = __raw_readl(S3C2416_INTPND2);
-
- if (pend == 0 || pend == last)
- break;
-
- __raw_writel(pend, S3C2416_SRCPND2);
- __raw_writel(pend, S3C2416_INTPND2);
- printk(KERN_INFO "irq: clearing pending status %08x\n",
- (int)pend);
- last = pend;
- }
-
- for (irqno = IRQ_S3C2416_2D; irqno <= IRQ_S3C2416_I2S1; irqno++) {
- switch (irqno) {
- case IRQ_S3C2416_RESERVED2:
- case IRQ_S3C2416_RESERVED3:
- /* no IRQ here */
- break;
- default:
- irq_set_chip_and_handler(irqno, &s3c2416_irq_second,
- handle_edge_irq);
- set_irq_flags(irqno, IRQF_VALID);
- }
- }
-}
-
-static int s3c2416_irq_add(struct device *dev,
- struct subsys_interface *sif)
-{
- printk(KERN_INFO "S3C2416: IRQ Support\n");
-
- s3c2416_add_sub(IRQ_LCD, s3c2416_irq_demux_lcd, &s3c2416_irq_lcd,
- IRQ_S3C2443_LCD2, IRQ_S3C2443_LCD4);
-
- s3c2416_add_sub(IRQ_S3C2443_DMA, s3c2416_irq_demux_dma,
- &s3c2416_irq_dma, IRQ_S3C2443_DMA0, IRQ_S3C2443_DMA5);
-
- s3c2416_add_sub(IRQ_S3C2443_UART3, s3c2416_irq_demux_uart3,
- &s3c2416_irq_uart3,
- IRQ_S3C2443_RX3, IRQ_S3C2443_ERR3);
-
- s3c2416_add_sub(IRQ_WDT, s3c2416_irq_demux_wdtac97,
- &s3c2416_irq_wdtac97,
- IRQ_S3C2443_WDT, IRQ_S3C2443_AC97);
-
- s3c2416_irq_add_second();
-
- return 0;
-}
-
-static struct subsys_interface s3c2416_irq_interface = {
- .name = "s3c2416_irq",
- .subsys = &s3c2416_subsys,
- .add_dev = s3c2416_irq_add,
-};
-
-static int __init s3c2416_irq_init(void)
-{
- return subsys_interface_register(&s3c2416_irq_interface);
-}
-
-arch_initcall(s3c2416_irq_init);
-
-#ifdef CONFIG_PM
-static struct sleep_save irq_save[] = {
- SAVE_ITEM(S3C2416_INTMSK2),
-};
-
-int s3c2416_irq_suspend(void)
-{
- s3c_pm_do_save(irq_save, ARRAY_SIZE(irq_save));
-
- return 0;
-}
-
-void s3c2416_irq_resume(void)
-{
- s3c_pm_do_restore(irq_save, ARRAY_SIZE(irq_save));
-}
-
-struct syscore_ops s3c2416_irq_syscore_ops = {
- .suspend = s3c2416_irq_suspend,
- .resume = s3c2416_irq_resume,
-};
-#endif
diff --git a/arch/arm/mach-s3c24xx/irq-s3c2443.c b/arch/arm/mach-s3c24xx/irq-s3c2443.c
deleted file mode 100644
index 5e69109..0000000
--- a/arch/arm/mach-s3c24xx/irq-s3c2443.c
+++ /dev/null
@@ -1,281 +0,0 @@
-/* linux/arch/arm/mach-s3c2443/irq.c
- *
- * Copyright (c) 2007 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
-*/
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/device.h>
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-#include <asm/irq.h>
-
-#include <asm/mach/irq.h>
-
-#include <mach/regs-irq.h>
-#include <mach/regs-gpio.h>
-
-#include <plat/cpu.h>
-#include <plat/pm.h>
-#include <plat/irq.h>
-
-#define INTMSK(start, end) ((1 << ((end) + 1 - (start))) - 1)
-
-static inline void s3c2443_irq_demux(unsigned int irq, unsigned int len)
-{
- unsigned int subsrc, submsk;
- unsigned int end;
-
- /* read the current pending interrupts, and the mask
- * for what it is available */
-
- subsrc = __raw_readl(S3C2410_SUBSRCPND);
- submsk = __raw_readl(S3C2410_INTSUBMSK);
-
- subsrc &= ~submsk;
- subsrc >>= (irq - S3C2410_IRQSUB(0));
- subsrc &= (1 << len)-1;
-
- end = len + irq;
-
- for (; irq < end && subsrc; irq++) {
- if (subsrc & 1)
- generic_handle_irq(irq);
-
- subsrc >>= 1;
- }
-}
-
-/* WDT/AC97 sub interrupts */
-
-static void s3c2443_irq_demux_wdtac97(unsigned int irq, struct irq_desc *desc)
-{
- s3c2443_irq_demux(IRQ_S3C2443_WDT, 4);
-}
-
-#define INTMSK_WDTAC97 (1UL << (IRQ_WDT - IRQ_EINT0))
-#define SUBMSK_WDTAC97 INTMSK(IRQ_S3C2443_WDT, IRQ_S3C2443_AC97)
-
-static void s3c2443_irq_wdtac97_mask(struct irq_data *data)
-{
- s3c_irqsub_mask(data->irq, INTMSK_WDTAC97, SUBMSK_WDTAC97);
-}
-
-static void s3c2443_irq_wdtac97_unmask(struct irq_data *data)
-{
- s3c_irqsub_unmask(data->irq, INTMSK_WDTAC97);
-}
-
-static void s3c2443_irq_wdtac97_ack(struct irq_data *data)
-{
- s3c_irqsub_maskack(data->irq, INTMSK_WDTAC97, SUBMSK_WDTAC97);
-}
-
-static struct irq_chip s3c2443_irq_wdtac97 = {
- .irq_mask = s3c2443_irq_wdtac97_mask,
- .irq_unmask = s3c2443_irq_wdtac97_unmask,
- .irq_ack = s3c2443_irq_wdtac97_ack,
-};
-
-/* LCD sub interrupts */
-
-static void s3c2443_irq_demux_lcd(unsigned int irq, struct irq_desc *desc)
-{
- s3c2443_irq_demux(IRQ_S3C2443_LCD1, 4);
-}
-
-#define INTMSK_LCD (1UL << (IRQ_LCD - IRQ_EINT0))
-#define SUBMSK_LCD INTMSK(IRQ_S3C2443_LCD1, IRQ_S3C2443_LCD4)
-
-static void s3c2443_irq_lcd_mask(struct irq_data *data)
-{
- s3c_irqsub_mask(data->irq, INTMSK_LCD, SUBMSK_LCD);
-}
-
-static void s3c2443_irq_lcd_unmask(struct irq_data *data)
-{
- s3c_irqsub_unmask(data->irq, INTMSK_LCD);
-}
-
-static void s3c2443_irq_lcd_ack(struct irq_data *data)
-{
- s3c_irqsub_maskack(data->irq, INTMSK_LCD, SUBMSK_LCD);
-}
-
-static struct irq_chip s3c2443_irq_lcd = {
- .irq_mask = s3c2443_irq_lcd_mask,
- .irq_unmask = s3c2443_irq_lcd_unmask,
- .irq_ack = s3c2443_irq_lcd_ack,
-};
-
-/* DMA sub interrupts */
-
-static void s3c2443_irq_demux_dma(unsigned int irq, struct irq_desc *desc)
-{
- s3c2443_irq_demux(IRQ_S3C2443_DMA0, 6);
-}
-
-#define INTMSK_DMA (1UL << (IRQ_S3C2443_DMA - IRQ_EINT0))
-#define SUBMSK_DMA INTMSK(IRQ_S3C2443_DMA0, IRQ_S3C2443_DMA5)
-
-static void s3c2443_irq_dma_mask(struct irq_data *data)
-{
- s3c_irqsub_mask(data->irq, INTMSK_DMA, SUBMSK_DMA);
-}
-
-static void s3c2443_irq_dma_unmask(struct irq_data *data)
-{
- s3c_irqsub_unmask(data->irq, INTMSK_DMA);
-}
-
-static void s3c2443_irq_dma_ack(struct irq_data *data)
-{
- s3c_irqsub_maskack(data->irq, INTMSK_DMA, SUBMSK_DMA);
-}
-
-static struct irq_chip s3c2443_irq_dma = {
- .irq_mask = s3c2443_irq_dma_mask,
- .irq_unmask = s3c2443_irq_dma_unmask,
- .irq_ack = s3c2443_irq_dma_ack,
-};
-
-/* UART3 sub interrupts */
-
-static void s3c2443_irq_demux_uart3(unsigned int irq, struct irq_desc *desc)
-{
- s3c2443_irq_demux(IRQ_S3C2443_RX3, 3);
-}
-
-#define INTMSK_UART3 (1UL << (IRQ_S3C2443_UART3 - IRQ_EINT0))
-#define SUBMSK_UART3 (0x7 << (IRQ_S3C2443_RX3 - S3C2410_IRQSUB(0)))
-
-static void s3c2443_irq_uart3_mask(struct irq_data *data)
-{
- s3c_irqsub_mask(data->irq, INTMSK_UART3, SUBMSK_UART3);
-}
-
-static void s3c2443_irq_uart3_unmask(struct irq_data *data)
-{
- s3c_irqsub_unmask(data->irq, INTMSK_UART3);
-}
-
-static void s3c2443_irq_uart3_ack(struct irq_data *data)
-{
- s3c_irqsub_maskack(data->irq, INTMSK_UART3, SUBMSK_UART3);
-}
-
-static struct irq_chip s3c2443_irq_uart3 = {
- .irq_mask = s3c2443_irq_uart3_mask,
- .irq_unmask = s3c2443_irq_uart3_unmask,
- .irq_ack = s3c2443_irq_uart3_ack,
-};
-
-/* CAM sub interrupts */
-
-static void s3c2443_irq_demux_cam(unsigned int irq, struct irq_desc *desc)
-{
- s3c2443_irq_demux(IRQ_S3C2440_CAM_C, 4);
-}
-
-#define INTMSK_CAM (1UL << (IRQ_CAM - IRQ_EINT0))
-#define SUBMSK_CAM INTMSK(IRQ_S3C2440_CAM_C, IRQ_S3C2440_CAM_P)
-
-static void s3c2443_irq_cam_mask(struct irq_data *data)
-{
- s3c_irqsub_mask(data->irq, INTMSK_CAM, SUBMSK_CAM);
-}
-
-static void s3c2443_irq_cam_unmask(struct irq_data *data)
-{
- s3c_irqsub_unmask(data->irq, INTMSK_CAM);
-}
-
-static void s3c2443_irq_cam_ack(struct irq_data *data)
-{
- s3c_irqsub_maskack(data->irq, INTMSK_CAM, SUBMSK_CAM);
-}
-
-static struct irq_chip s3c2443_irq_cam = {
- .irq_mask = s3c2443_irq_cam_mask,
- .irq_unmask = s3c2443_irq_cam_unmask,
- .irq_ack = s3c2443_irq_cam_ack,
-};
-
-/* IRQ initialisation code */
-
-static int s3c2443_add_sub(unsigned int base,
- void (*demux)(unsigned int,
- struct irq_desc *),
- struct irq_chip *chip,
- unsigned int start, unsigned int end)
-{
- unsigned int irqno;
-
- irq_set_chip_and_handler(base, &s3c_irq_level_chip, handle_level_irq);
- irq_set_chained_handler(base, demux);
-
- for (irqno = start; irqno <= end; irqno++) {
- irq_set_chip_and_handler(irqno, chip, handle_level_irq);
- set_irq_flags(irqno, IRQF_VALID);
- }
-
- return 0;
-}
-
-static int s3c2443_irq_add(struct device *dev,
- struct subsys_interface *sif)
-{
- printk("S3C2443: IRQ Support\n");
-
- s3c2443_add_sub(IRQ_CAM, s3c2443_irq_demux_cam, &s3c2443_irq_cam,
- IRQ_S3C2440_CAM_C, IRQ_S3C2440_CAM_P);
-
- s3c2443_add_sub(IRQ_LCD, s3c2443_irq_demux_lcd, &s3c2443_irq_lcd,
- IRQ_S3C2443_LCD1, IRQ_S3C2443_LCD4);
-
- s3c2443_add_sub(IRQ_S3C2443_DMA, s3c2443_irq_demux_dma,
- &s3c2443_irq_dma, IRQ_S3C2443_DMA0, IRQ_S3C2443_DMA5);
-
- s3c2443_add_sub(IRQ_S3C2443_UART3, s3c2443_irq_demux_uart3,
- &s3c2443_irq_uart3,
- IRQ_S3C2443_RX3, IRQ_S3C2443_ERR3);
-
- s3c2443_add_sub(IRQ_WDT, s3c2443_irq_demux_wdtac97,
- &s3c2443_irq_wdtac97,
- IRQ_S3C2443_WDT, IRQ_S3C2443_AC97);
-
- return 0;
-}
-
-static struct subsys_interface s3c2443_irq_interface = {
- .name = "s3c2443_irq",
- .subsys = &s3c2443_subsys,
- .add_dev = s3c2443_irq_add,
-};
-
-static int __init s3c2443_irq_init(void)
-{
- return subsys_interface_register(&s3c2443_irq_interface);
-}
-
-arch_initcall(s3c2443_irq_init);
-
diff --git a/arch/arm/mach-s3c24xx/irq.c b/arch/arm/mach-s3c24xx/irq.c
new file mode 100644
index 0000000..cb9f5e0
--- /dev/null
+++ b/arch/arm/mach-s3c24xx/irq.c
@@ -0,0 +1,822 @@
+/*
+ * S3C24XX IRQ handling
+ *
+ * Copyright (c) 2003-2004 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ * Copyright (c) 2012 Heiko Stuebner <heiko@sntech.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+*/
+
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/io.h>
+#include <linux/err.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/device.h>
+#include <linux/irqdomain.h>
+
+#include <asm/mach/irq.h>
+
+#include <mach/regs-irq.h>
+#include <mach/regs-gpio.h>
+
+#include <plat/cpu.h>
+#include <plat/regs-irqtype.h>
+#include <plat/pm.h>
+#include <plat/irq.h>
+
+#define S3C_IRQTYPE_NONE 0
+#define S3C_IRQTYPE_EINT 1
+#define S3C_IRQTYPE_EDGE 2
+#define S3C_IRQTYPE_LEVEL 3
+
+struct s3c_irq_data {
+ unsigned int type;
+ unsigned long parent_irq;
+
+ /* data gets filled during init */
+ struct s3c_irq_intc *intc;
+ unsigned long sub_bits;
+ struct s3c_irq_intc *sub_intc;
+};
+
+/*
+ * Sructure holding the controller data
+ * @reg_pending register holding pending irqs
+ * @reg_intpnd special register intpnd in main intc
+ * @reg_mask mask register
+ * @domain irq_domain of the controller
+ * @parent parent controller for ext and sub irqs
+ * @irqs irq-data, always s3c_irq_data[32]
+ */
+struct s3c_irq_intc {
+ void __iomem *reg_pending;
+ void __iomem *reg_intpnd;
+ void __iomem *reg_mask;
+ struct irq_domain *domain;
+ struct s3c_irq_intc *parent;
+ struct s3c_irq_data *irqs;
+};
+
+static void s3c_irq_mask(struct irq_data *data)
+{
+ struct s3c_irq_intc *intc = data->domain->host_data;
+ struct s3c_irq_intc *parent_intc = intc->parent;
+ struct s3c_irq_data *irq_data = &intc->irqs[data->hwirq];
+ struct s3c_irq_data *parent_data;
+ unsigned long mask;
+ unsigned int irqno;
+
+ mask = __raw_readl(intc->reg_mask);
+ mask |= (1UL << data->hwirq);
+ __raw_writel(mask, intc->reg_mask);
+
+ if (parent_intc && irq_data->parent_irq) {
+ parent_data = &parent_intc->irqs[irq_data->parent_irq];
+
+ /* check to see if we need to mask the parent IRQ */
+ if ((mask & parent_data->sub_bits) == parent_data->sub_bits) {
+ irqno = irq_find_mapping(parent_intc->domain,
+ irq_data->parent_irq);
+ s3c_irq_mask(irq_get_irq_data(irqno));
+ }
+ }
+}
+
+static void s3c_irq_unmask(struct irq_data *data)
+{
+ struct s3c_irq_intc *intc = data->domain->host_data;
+ struct s3c_irq_intc *parent_intc = intc->parent;
+ struct s3c_irq_data *irq_data = &intc->irqs[data->hwirq];
+ unsigned long mask;
+ unsigned int irqno;
+
+ mask = __raw_readl(intc->reg_mask);
+ mask &= ~(1UL << data->hwirq);
+ __raw_writel(mask, intc->reg_mask);
+
+ if (parent_intc && irq_data->parent_irq) {
+ irqno = irq_find_mapping(parent_intc->domain,
+ irq_data->parent_irq);
+ s3c_irq_unmask(irq_get_irq_data(irqno));
+ }
+}
+
+static inline void s3c_irq_ack(struct irq_data *data)
+{
+ struct s3c_irq_intc *intc = data->domain->host_data;
+ unsigned long bitval = 1UL << data->hwirq;
+
+ __raw_writel(bitval, intc->reg_pending);
+ if (intc->reg_intpnd)
+ __raw_writel(bitval, intc->reg_intpnd);
+}
+
+static int s3c_irqext_type_set(void __iomem *gpcon_reg,
+ void __iomem *extint_reg,
+ unsigned long gpcon_offset,
+ unsigned long extint_offset,
+ unsigned int type)
+{
+ unsigned long newvalue = 0, value;
+
+ /* Set the GPIO to external interrupt mode */
+ value = __raw_readl(gpcon_reg);
+ value = (value & ~(3 << gpcon_offset)) | (0x02 << gpcon_offset);
+ __raw_writel(value, gpcon_reg);
+
+ /* Set the external interrupt to pointed trigger type */
+ switch (type)
+ {
+ case IRQ_TYPE_NONE:
+ pr_warn("No edge setting!\n");
+ break;
+
+ case IRQ_TYPE_EDGE_RISING:
+ newvalue = S3C2410_EXTINT_RISEEDGE;
+ break;
+
+ case IRQ_TYPE_EDGE_FALLING:
+ newvalue = S3C2410_EXTINT_FALLEDGE;
+ break;
+
+ case IRQ_TYPE_EDGE_BOTH:
+ newvalue = S3C2410_EXTINT_BOTHEDGE;
+ break;
+
+ case IRQ_TYPE_LEVEL_LOW:
+ newvalue = S3C2410_EXTINT_LOWLEV;
+ break;
+
+ case IRQ_TYPE_LEVEL_HIGH:
+ newvalue = S3C2410_EXTINT_HILEV;
+ break;
+
+ default:
+ pr_err("No such irq type %d", type);
+ return -EINVAL;
+ }
+
+ value = __raw_readl(extint_reg);
+ value = (value & ~(7 << extint_offset)) | (newvalue << extint_offset);
+ __raw_writel(value, extint_reg);
+
+ return 0;
+}
+
+/* FIXME: make static when it's out of plat-samsung/irq.h */
+int s3c_irqext_type(struct irq_data *data, unsigned int type)
+{
+ void __iomem *extint_reg;
+ void __iomem *gpcon_reg;
+ unsigned long gpcon_offset, extint_offset;
+
+ if ((data->hwirq >= 4) && (data->hwirq <= 7)) {
+ gpcon_reg = S3C2410_GPFCON;
+ extint_reg = S3C24XX_EXTINT0;
+ gpcon_offset = (data->hwirq) * 2;
+ extint_offset = (data->hwirq) * 4;
+ } else if ((data->hwirq >= 8) && (data->hwirq <= 15)) {
+ gpcon_reg = S3C2410_GPGCON;
+ extint_reg = S3C24XX_EXTINT1;
+ gpcon_offset = (data->hwirq - 8) * 2;
+ extint_offset = (data->hwirq - 8) * 4;
+ } else if ((data->hwirq >= 16) && (data->hwirq <= 23)) {
+ gpcon_reg = S3C2410_GPGCON;
+ extint_reg = S3C24XX_EXTINT2;
+ gpcon_offset = (data->hwirq - 8) * 2;
+ extint_offset = (data->hwirq - 16) * 4;
+ } else {
+ return -EINVAL;
+ }
+
+ return s3c_irqext_type_set(gpcon_reg, extint_reg, gpcon_offset,
+ extint_offset, type);
+}
+
+static int s3c_irqext0_type(struct irq_data *data, unsigned int type)
+{
+ void __iomem *extint_reg;
+ void __iomem *gpcon_reg;
+ unsigned long gpcon_offset, extint_offset;
+
+ if ((data->hwirq >= 0) && (data->hwirq <= 3)) {
+ gpcon_reg = S3C2410_GPFCON;
+ extint_reg = S3C24XX_EXTINT0;
+ gpcon_offset = (data->hwirq) * 2;
+ extint_offset = (data->hwirq) * 4;
+ } else {
+ return -EINVAL;
+ }
+
+ return s3c_irqext_type_set(gpcon_reg, extint_reg, gpcon_offset,
+ extint_offset, type);
+}
+
+struct irq_chip s3c_irq_chip = {
+ .name = "s3c",
+ .irq_ack = s3c_irq_ack,
+ .irq_mask = s3c_irq_mask,
+ .irq_unmask = s3c_irq_unmask,
+ .irq_set_wake = s3c_irq_wake
+};
+
+struct irq_chip s3c_irq_level_chip = {
+ .name = "s3c-level",
+ .irq_mask = s3c_irq_mask,
+ .irq_unmask = s3c_irq_unmask,
+ .irq_ack = s3c_irq_ack,
+};
+
+static struct irq_chip s3c_irqext_chip = {
+ .name = "s3c-ext",
+ .irq_mask = s3c_irq_mask,
+ .irq_unmask = s3c_irq_unmask,
+ .irq_ack = s3c_irq_ack,
+ .irq_set_type = s3c_irqext_type,
+ .irq_set_wake = s3c_irqext_wake
+};
+
+static struct irq_chip s3c_irq_eint0t4 = {
+ .name = "s3c-ext0",
+ .irq_ack = s3c_irq_ack,
+ .irq_mask = s3c_irq_mask,
+ .irq_unmask = s3c_irq_unmask,
+ .irq_set_wake = s3c_irq_wake,
+ .irq_set_type = s3c_irqext0_type,
+};
+
+static void s3c_irq_demux(unsigned int irq, struct irq_desc *desc)
+{
+ struct irq_chip *chip = irq_desc_get_chip(desc);
+ struct s3c_irq_intc *intc = desc->irq_data.domain->host_data;
+ struct s3c_irq_data *irq_data = &intc->irqs[desc->irq_data.hwirq];
+ struct s3c_irq_intc *sub_intc = irq_data->sub_intc;
+ unsigned long src;
+ unsigned long msk;
+ unsigned int n;
+
+ chained_irq_enter(chip, desc);
+
+ src = __raw_readl(sub_intc->reg_pending);
+ msk = __raw_readl(sub_intc->reg_mask);
+
+ src &= ~msk;
+ src &= irq_data->sub_bits;
+
+ while (src) {
+ n = __ffs(src);
+ src &= ~(1 << n);
+ generic_handle_irq(irq_find_mapping(sub_intc->domain, n));
+ }
+
+ chained_irq_exit(chip, desc);
+}
+
+#ifdef CONFIG_FIQ
+/**
+ * s3c24xx_set_fiq - set the FIQ routing
+ * @irq: IRQ number to route to FIQ on processor.
+ * @on: Whether to route @irq to the FIQ, or to remove the FIQ routing.
+ *
+ * Change the state of the IRQ to FIQ routing depending on @irq and @on. If
+ * @on is true, the @irq is checked to see if it can be routed and the
+ * interrupt controller updated to route the IRQ. If @on is false, the FIQ
+ * routing is cleared, regardless of which @irq is specified.
+ */
+int s3c24xx_set_fiq(unsigned int irq, bool on)
+{
+ u32 intmod;
+ unsigned offs;
+
+ if (on) {
+ offs = irq - FIQ_START;
+ if (offs > 31)
+ return -EINVAL;
+
+ intmod = 1 << offs;
+ } else {
+ intmod = 0;
+ }
+
+ __raw_writel(intmod, S3C2410_INTMOD);
+ return 0;
+}
+
+EXPORT_SYMBOL_GPL(s3c24xx_set_fiq);
+#endif
+
+static int s3c24xx_irq_map(struct irq_domain *h, unsigned int virq,
+ irq_hw_number_t hw)
+{
+ struct s3c_irq_intc *intc = h->host_data;
+ struct s3c_irq_data *irq_data = &intc->irqs[hw];
+ struct s3c_irq_intc *parent_intc;
+ struct s3c_irq_data *parent_irq_data;
+ unsigned int irqno;
+
+ if (!intc) {
+ pr_err("irq-s3c24xx: no controller found for hwirq %lu\n", hw);
+ return -EINVAL;
+ }
+
+ if (!irq_data) {
+ pr_err("irq-s3c24xx: no irq data found for hwirq %lu\n", hw);
+ return -EINVAL;
+ }
+
+ /* attach controller pointer to irq_data */
+ irq_data->intc = intc;
+
+ /* set handler and flags */
+ switch (irq_data->type) {
+ case S3C_IRQTYPE_NONE:
+ return 0;
+ case S3C_IRQTYPE_EINT:
+ if (irq_data->parent_irq)
+ irq_set_chip_and_handler(virq, &s3c_irqext_chip,
+ handle_edge_irq);
+ else
+ irq_set_chip_and_handler(virq, &s3c_irq_eint0t4,
+ handle_edge_irq);
+ break;
+ case S3C_IRQTYPE_EDGE:
+ if (irq_data->parent_irq ||
+ intc->reg_pending == S3C2416_SRCPND2)
+ irq_set_chip_and_handler(virq, &s3c_irq_level_chip,
+ handle_edge_irq);
+ else
+ irq_set_chip_and_handler(virq, &s3c_irq_chip,
+ handle_edge_irq);
+ break;
+ case S3C_IRQTYPE_LEVEL:
+ if (irq_data->parent_irq)
+ irq_set_chip_and_handler(virq, &s3c_irq_level_chip,
+ handle_level_irq);
+ else
+ irq_set_chip_and_handler(virq, &s3c_irq_chip,
+ handle_level_irq);
+ break;
+ default:
+ pr_err("irq-s3c24xx: unsupported irqtype %d\n", irq_data->type);
+ return -EINVAL;
+ }
+ set_irq_flags(virq, IRQF_VALID);
+
+ if (irq_data->parent_irq) {
+ parent_intc = intc->parent;
+ if (!parent_intc) {
+ pr_err("irq-s3c24xx: no parent controller found for hwirq %lu\n",
+ hw);
+ goto err;
+ }
+
+ parent_irq_data = &parent_intc->irqs[irq_data->parent_irq];
+ if (!irq_data) {
+ pr_err("irq-s3c24xx: no irq data found for hwirq %lu\n",
+ hw);
+ goto err;
+ }
+
+ parent_irq_data->sub_intc = intc;
+ parent_irq_data->sub_bits |= (1UL << hw);
+
+ /* attach the demuxer to the parent irq */
+ irqno = irq_find_mapping(parent_intc->domain,
+ irq_data->parent_irq);
+ if (!irqno) {
+ pr_err("irq-s3c24xx: could not find mapping for parent irq %lu\n",
+ irq_data->parent_irq);
+ goto err;
+ }
+ irq_set_chained_handler(irqno, s3c_irq_demux);
+ }
+
+ return 0;
+
+err:
+ set_irq_flags(virq, 0);
+
+ /* the only error can result from bad mapping data*/
+ return -EINVAL;
+}
+
+static struct irq_domain_ops s3c24xx_irq_ops = {
+ .map = s3c24xx_irq_map,
+ .xlate = irq_domain_xlate_twocell,
+};
+
+static void s3c24xx_clear_intc(struct s3c_irq_intc *intc)
+{
+ void __iomem *reg_source;
+ unsigned long pend;
+ unsigned long last;
+ int i;
+
+ /* if intpnd is set, read the next pending irq from there */
+ reg_source = intc->reg_intpnd ? intc->reg_intpnd : intc->reg_pending;
+
+ last = 0;
+ for (i = 0; i < 4; i++) {
+ pend = __raw_readl(reg_source);
+
+ if (pend == 0 || pend == last)
+ break;
+
+ __raw_writel(pend, intc->reg_pending);
+ if (intc->reg_intpnd)
+ __raw_writel(pend, intc->reg_intpnd);
+
+ pr_info("irq: clearing pending status %08x\n", (int)pend);
+ last = pend;
+ }
+}
+
+struct s3c_irq_intc *s3c24xx_init_intc(struct device_node *np,
+ struct s3c_irq_data *irq_data,
+ struct s3c_irq_intc *parent,
+ unsigned long address)
+{
+ struct s3c_irq_intc *intc;
+ void __iomem *base = (void *)0xf6000000; /* static mapping */
+ int irq_num;
+ int irq_start;
+ int irq_offset;
+ int ret;
+
+ intc = kzalloc(sizeof(struct s3c_irq_intc), GFP_KERNEL);
+ if (!intc)
+ return ERR_PTR(-ENOMEM);
+
+ intc->irqs = irq_data;
+
+ if (parent)
+ intc->parent = parent;
+
+ /* select the correct data for the controller.
+ * Need to hard code the irq num start and offset
+ * to preserve the static mapping for now
+ */
+ switch (address) {
+ case 0x4a000000:
+ pr_debug("irq: found main intc\n");
+ intc->reg_pending = base;
+ intc->reg_mask = base + 0x08;
+ intc->reg_intpnd = base + 0x10;
+ irq_num = 32;
+ irq_start = S3C2410_IRQ(0);
+ irq_offset = 0;
+ break;
+ case 0x4a000018:
+ pr_debug("irq: found subintc\n");
+ intc->reg_pending = base + 0x18;
+ intc->reg_mask = base + 0x1c;
+ irq_num = 29;
+ irq_start = S3C2410_IRQSUB(0);
+ irq_offset = 0;
+ break;
+ case 0x4a000040:
+ pr_debug("irq: found intc2\n");
+ intc->reg_pending = base + 0x40;
+ intc->reg_mask = base + 0x48;
+ intc->reg_intpnd = base + 0x50;
+ irq_num = 8;
+ irq_start = S3C2416_IRQ(0);
+ irq_offset = 0;
+ break;
+ case 0x560000a4:
+ pr_debug("irq: found eintc\n");
+ base = (void *)0xfd000000;
+
+ intc->reg_mask = base + 0xa4;
+ intc->reg_pending = base + 0x08;
+ irq_num = 20;
+ irq_start = S3C2410_IRQ(32);
+ irq_offset = 4;
+ break;
+ default:
+ pr_err("irq: unsupported controller address\n");
+ ret = -EINVAL;
+ goto err;
+ }
+
+ /* now that all the data is complete, init the irq-domain */
+ s3c24xx_clear_intc(intc);
+ intc->domain = irq_domain_add_legacy(np, irq_num, irq_start,
+ irq_offset, &s3c24xx_irq_ops,
+ intc);
+ if (!intc->domain) {
+ pr_err("irq: could not create irq-domain\n");
+ ret = -EINVAL;
+ goto err;
+ }
+
+ return intc;
+
+err:
+ kfree(intc);
+ return ERR_PTR(ret);
+}
+
+/* s3c24xx_init_irq
+ *
+ * Initialise S3C2410 IRQ system
+*/
+
+static struct s3c_irq_data init_base[32] = {
+ { .type = S3C_IRQTYPE_EINT, }, /* EINT0 */
+ { .type = S3C_IRQTYPE_EINT, }, /* EINT1 */
+ { .type = S3C_IRQTYPE_EINT, }, /* EINT2 */
+ { .type = S3C_IRQTYPE_EINT, }, /* EINT3 */
+ { .type = S3C_IRQTYPE_LEVEL, }, /* EINT4to7 */
+ { .type = S3C_IRQTYPE_LEVEL, }, /* EINT8to23 */
+ { .type = S3C_IRQTYPE_NONE, }, /* reserved */
+ { .type = S3C_IRQTYPE_EDGE, }, /* nBATT_FLT */
+ { .type = S3C_IRQTYPE_EDGE, }, /* TICK */
+ { .type = S3C_IRQTYPE_EDGE, }, /* WDT */
+ { .type = S3C_IRQTYPE_EDGE, }, /* TIMER0 */
+ { .type = S3C_IRQTYPE_EDGE, }, /* TIMER1 */
+ { .type = S3C_IRQTYPE_EDGE, }, /* TIMER2 */
+ { .type = S3C_IRQTYPE_EDGE, }, /* TIMER3 */
+ { .type = S3C_IRQTYPE_EDGE, }, /* TIMER4 */
+ { .type = S3C_IRQTYPE_LEVEL, }, /* UART2 */
+ { .type = S3C_IRQTYPE_EDGE, }, /* LCD */
+ { .type = S3C_IRQTYPE_EDGE, }, /* DMA0 */
+ { .type = S3C_IRQTYPE_EDGE, }, /* DMA1 */
+ { .type = S3C_IRQTYPE_EDGE, }, /* DMA2 */
+ { .type = S3C_IRQTYPE_EDGE, }, /* DMA3 */
+ { .type = S3C_IRQTYPE_EDGE, }, /* SDI */
+ { .type = S3C_IRQTYPE_EDGE, }, /* SPI0 */
+ { .type = S3C_IRQTYPE_LEVEL, }, /* UART1 */
+ { .type = S3C_IRQTYPE_NONE, }, /* reserved */
+ { .type = S3C_IRQTYPE_EDGE, }, /* USBD */
+ { .type = S3C_IRQTYPE_EDGE, }, /* USBH */
+ { .type = S3C_IRQTYPE_EDGE, }, /* IIC */
+ { .type = S3C_IRQTYPE_LEVEL, }, /* UART0 */
+ { .type = S3C_IRQTYPE_EDGE, }, /* SPI1 */
+ { .type = S3C_IRQTYPE_EDGE, }, /* RTC */
+ { .type = S3C_IRQTYPE_LEVEL, }, /* ADCPARENT */
+};
+
+static struct s3c_irq_data init_eint[32] = {
+ { .type = S3C_IRQTYPE_NONE, }, /* reserved */
+ { .type = S3C_IRQTYPE_NONE, }, /* reserved */
+ { .type = S3C_IRQTYPE_NONE, }, /* reserved */
+ { .type = S3C_IRQTYPE_NONE, }, /* reserved */
+ { .type = S3C_IRQTYPE_EINT, .parent_irq = 4 }, /* EINT4 */
+ { .type = S3C_IRQTYPE_EINT, .parent_irq = 4 }, /* EINT5 */
+ { .type = S3C_IRQTYPE_EINT, .parent_irq = 4 }, /* EINT6 */
+ { .type = S3C_IRQTYPE_EINT, .parent_irq = 4 }, /* EINT7 */
+ { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT8 */
+ { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT9 */
+ { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT10 */
+ { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT11 */
+ { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT12 */
+ { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT13 */
+ { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT14 */
+ { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT15 */
+ { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT16 */
+ { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT17 */
+ { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT18 */
+ { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT19 */
+ { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT20 */
+ { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT21 */
+ { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT22 */
+ { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT23 */
+};
+
+static struct s3c_irq_data init_subint[32] = {
+ { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-RX */
+ { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-TX */
+ { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-ERR */
+ { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-RX */
+ { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-TX */
+ { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-ERR */
+ { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-RX */
+ { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-TX */
+ { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-ERR */
+ { .type = S3C_IRQTYPE_EDGE, .parent_irq = 31 }, /* TC */
+ { .type = S3C_IRQTYPE_EDGE, .parent_irq = 31 }, /* ADC */
+};
+
+void __init s3c24xx_init_irq(void)
+{
+ struct s3c_irq_intc *main_intc;
+
+#ifdef CONFIG_FIQ
+ init_FIQ(FIQ_START);
+#endif
+
+ main_intc = s3c24xx_init_intc(NULL, &init_base[0], NULL, 0x4a000000);
+ if (IS_ERR(main_intc)) {
+ pr_err("irq: could not create main interrupt controller\n");
+ return;
+ }
+
+ s3c24xx_init_intc(NULL, &init_subint[0], main_intc, 0x4a000018);
+ s3c24xx_init_intc(NULL, &init_eint[0], main_intc, 0x560000a4);
+}
+
+#ifdef CONFIG_CPU_S3C2416
+static struct s3c_irq_data init_s3c2416base[32] = {
+ { .type = S3C_IRQTYPE_EINT, }, /* EINT0 */
+ { .type = S3C_IRQTYPE_EINT, }, /* EINT1 */
+ { .type = S3C_IRQTYPE_EINT, }, /* EINT2 */
+ { .type = S3C_IRQTYPE_EINT, }, /* EINT3 */
+ { .type = S3C_IRQTYPE_LEVEL, }, /* EINT4to7 */
+ { .type = S3C_IRQTYPE_LEVEL, }, /* EINT8to23 */
+ { .type = S3C_IRQTYPE_NONE, }, /* reserved */
+ { .type = S3C_IRQTYPE_EDGE, }, /* nBATT_FLT */
+ { .type = S3C_IRQTYPE_EDGE, }, /* TICK */
+ { .type = S3C_IRQTYPE_LEVEL, }, /* WDT/AC97 */
+ { .type = S3C_IRQTYPE_EDGE, }, /* TIMER0 */
+ { .type = S3C_IRQTYPE_EDGE, }, /* TIMER1 */
+ { .type = S3C_IRQTYPE_EDGE, }, /* TIMER2 */
+ { .type = S3C_IRQTYPE_EDGE, }, /* TIMER3 */
+ { .type = S3C_IRQTYPE_EDGE, }, /* TIMER4 */
+ { .type = S3C_IRQTYPE_LEVEL, }, /* UART2 */
+ { .type = S3C_IRQTYPE_LEVEL, }, /* LCD */
+ { .type = S3C_IRQTYPE_LEVEL, }, /* DMA */
+ { .type = S3C_IRQTYPE_LEVEL, }, /* UART3 */
+ { .type = S3C_IRQTYPE_NONE, }, /* reserved */
+ { .type = S3C_IRQTYPE_EDGE, }, /* SDI1 */
+ { .type = S3C_IRQTYPE_EDGE, }, /* SDI0 */
+ { .type = S3C_IRQTYPE_EDGE, }, /* SPI0 */
+ { .type = S3C_IRQTYPE_LEVEL, }, /* UART1 */
+ { .type = S3C_IRQTYPE_EDGE, }, /* NAND */
+ { .type = S3C_IRQTYPE_EDGE, }, /* USBD */
+ { .type = S3C_IRQTYPE_EDGE, }, /* USBH */
+ { .type = S3C_IRQTYPE_EDGE, }, /* IIC */
+ { .type = S3C_IRQTYPE_LEVEL, }, /* UART0 */
+ { .type = S3C_IRQTYPE_NONE, },
+ { .type = S3C_IRQTYPE_EDGE, }, /* RTC */
+ { .type = S3C_IRQTYPE_LEVEL, }, /* ADCPARENT */
+};
+
+static struct s3c_irq_data init_s3c2416subint[32] = {
+ { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-RX */
+ { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-TX */
+ { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-ERR */
+ { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-RX */
+ { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-TX */
+ { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-ERR */
+ { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-RX */
+ { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-TX */
+ { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-ERR */
+ { .type = S3C_IRQTYPE_EDGE, .parent_irq = 31 }, /* TC */
+ { .type = S3C_IRQTYPE_EDGE, .parent_irq = 31 }, /* ADC */
+ { .type = S3C_IRQTYPE_NONE }, /* reserved */
+ { .type = S3C_IRQTYPE_NONE }, /* reserved */
+ { .type = S3C_IRQTYPE_NONE }, /* reserved */
+ { .type = S3C_IRQTYPE_NONE }, /* reserved */
+ { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 16 }, /* LCD2 */
+ { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 16 }, /* LCD3 */
+ { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 16 }, /* LCD4 */
+ { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 17 }, /* DMA0 */
+ { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 17 }, /* DMA1 */
+ { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 17 }, /* DMA2 */
+ { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 17 }, /* DMA3 */
+ { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 17 }, /* DMA4 */
+ { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 17 }, /* DMA5 */
+ { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 18 }, /* UART3-RX */
+ { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 18 }, /* UART3-TX */
+ { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 18 }, /* UART3-ERR */
+ { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 9 }, /* WDT */
+ { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 9 }, /* AC97 */
+};
+
+static struct s3c_irq_data init_s3c2416_second[32] = {
+ { .type = S3C_IRQTYPE_EDGE }, /* 2D */
+ { .type = S3C_IRQTYPE_EDGE }, /* IIC1 */
+ { .type = S3C_IRQTYPE_NONE }, /* reserved */
+ { .type = S3C_IRQTYPE_NONE }, /* reserved */
+ { .type = S3C_IRQTYPE_EDGE }, /* PCM0 */
+ { .type = S3C_IRQTYPE_EDGE }, /* PCM1 */
+ { .type = S3C_IRQTYPE_EDGE }, /* I2S0 */
+ { .type = S3C_IRQTYPE_EDGE }, /* I2S1 */
+};
+
+void __init s3c2416_init_irq(void)
+{
+ struct s3c_irq_intc *main_intc;
+
+ pr_info("S3C2416: IRQ Support\n");
+
+#ifdef CONFIG_FIQ
+ init_FIQ(FIQ_START);
+#endif
+
+ main_intc = s3c24xx_init_intc(NULL, &init_s3c2416base[0], NULL, 0x4a000000);
+ if (IS_ERR(main_intc)) {
+ pr_err("irq: could not create main interrupt controller\n");
+ return;
+ }
+
+ s3c24xx_init_intc(NULL, &init_eint[0], main_intc, 0x560000a4);
+ s3c24xx_init_intc(NULL, &init_s3c2416subint[0], main_intc, 0x4a000018);
+
+ s3c24xx_init_intc(NULL, &init_s3c2416_second[0], NULL, 0x4a000040);
+}
+
+#endif
+
+#ifdef CONFIG_CPU_S3C2443
+static struct s3c_irq_data init_s3c2443base[32] = {
+ { .type = S3C_IRQTYPE_EINT, }, /* EINT0 */
+ { .type = S3C_IRQTYPE_EINT, }, /* EINT1 */
+ { .type = S3C_IRQTYPE_EINT, }, /* EINT2 */
+ { .type = S3C_IRQTYPE_EINT, }, /* EINT3 */
+ { .type = S3C_IRQTYPE_LEVEL, }, /* EINT4to7 */
+ { .type = S3C_IRQTYPE_LEVEL, }, /* EINT8to23 */
+ { .type = S3C_IRQTYPE_LEVEL, }, /* CAM */
+ { .type = S3C_IRQTYPE_EDGE, }, /* nBATT_FLT */
+ { .type = S3C_IRQTYPE_EDGE, }, /* TICK */
+ { .type = S3C_IRQTYPE_LEVEL, }, /* WDT/AC97 */
+ { .type = S3C_IRQTYPE_EDGE, }, /* TIMER0 */
+ { .type = S3C_IRQTYPE_EDGE, }, /* TIMER1 */
+ { .type = S3C_IRQTYPE_EDGE, }, /* TIMER2 */
+ { .type = S3C_IRQTYPE_EDGE, }, /* TIMER3 */
+ { .type = S3C_IRQTYPE_EDGE, }, /* TIMER4 */
+ { .type = S3C_IRQTYPE_LEVEL, }, /* UART2 */
+ { .type = S3C_IRQTYPE_LEVEL, }, /* LCD */
+ { .type = S3C_IRQTYPE_LEVEL, }, /* DMA */
+ { .type = S3C_IRQTYPE_LEVEL, }, /* UART3 */
+ { .type = S3C_IRQTYPE_EDGE, }, /* CFON */
+ { .type = S3C_IRQTYPE_EDGE, }, /* SDI1 */
+ { .type = S3C_IRQTYPE_EDGE, }, /* SDI0 */
+ { .type = S3C_IRQTYPE_EDGE, }, /* SPI0 */
+ { .type = S3C_IRQTYPE_LEVEL, }, /* UART1 */
+ { .type = S3C_IRQTYPE_EDGE, }, /* NAND */
+ { .type = S3C_IRQTYPE_EDGE, }, /* USBD */
+ { .type = S3C_IRQTYPE_EDGE, }, /* USBH */
+ { .type = S3C_IRQTYPE_EDGE, }, /* IIC */
+ { .type = S3C_IRQTYPE_LEVEL, }, /* UART0 */
+ { .type = S3C_IRQTYPE_EDGE, }, /* SPI1 */
+ { .type = S3C_IRQTYPE_EDGE, }, /* RTC */
+ { .type = S3C_IRQTYPE_LEVEL, }, /* ADCPARENT */
+};
+
+
+static struct s3c_irq_data init_s3c2443subint[32] = {
+ { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-RX */
+ { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-TX */
+ { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-ERR */
+ { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-RX */
+ { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-TX */
+ { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-ERR */
+ { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-RX */
+ { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-TX */
+ { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-ERR */
+ { .type = S3C_IRQTYPE_EDGE, .parent_irq = 31 }, /* TC */
+ { .type = S3C_IRQTYPE_EDGE, .parent_irq = 31 }, /* ADC */
+ { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 6 }, /* CAM_C */
+ { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 6 }, /* CAM_P */
+ { .type = S3C_IRQTYPE_NONE }, /* reserved */
+ { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 16 }, /* LCD1 */
+ { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 16 }, /* LCD2 */
+ { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 16 }, /* LCD3 */
+ { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 16 }, /* LCD4 */
+ { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 17 }, /* DMA0 */
+ { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 17 }, /* DMA1 */
+ { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 17 }, /* DMA2 */
+ { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 17 }, /* DMA3 */
+ { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 17 }, /* DMA4 */
+ { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 17 }, /* DMA5 */
+ { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 18 }, /* UART3-RX */
+ { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 18 }, /* UART3-TX */
+ { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 18 }, /* UART3-ERR */
+ { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 9 }, /* WDT */
+ { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 9 }, /* AC97 */
+};
+
+void __init s3c2443_init_irq(void)
+{
+ struct s3c_irq_intc *main_intc;
+
+ pr_info("S3C2443: IRQ Support\n");
+
+#ifdef CONFIG_FIQ
+ init_FIQ(FIQ_START);
+#endif
+
+ main_intc = s3c24xx_init_intc(NULL, &init_s3c2443base[0], NULL, 0x4a000000);
+ if (IS_ERR(main_intc)) {
+ pr_err("irq: could not create main interrupt controller\n");
+ return;
+ }
+
+ s3c24xx_init_intc(NULL, &init_eint[0], main_intc, 0x560000a4);
+ s3c24xx_init_intc(NULL, &init_s3c2443subint[0], main_intc, 0x4a000018);
+}
+#endif
diff --git a/arch/arm/mach-s3c24xx/mach-amlm5900.c b/arch/arm/mach-s3c24xx/mach-amlm5900.c
index f4ad99c..0e0279e 100644
--- a/arch/arm/mach-s3c24xx/mach-amlm5900.c
+++ b/arch/arm/mach-s3c24xx/mach-amlm5900.c
@@ -237,6 +237,6 @@
.map_io = amlm5900_map_io,
.init_irq = s3c24xx_init_irq,
.init_machine = amlm5900_init,
- .timer = &s3c24xx_timer,
+ .init_time = s3c24xx_timer_init,
.restart = s3c2410_restart,
MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-anubis.c b/arch/arm/mach-s3c24xx/mach-anubis.c
index 1ee8c46..bb595f1 100644
--- a/arch/arm/mach-s3c24xx/mach-anubis.c
+++ b/arch/arm/mach-s3c24xx/mach-anubis.c
@@ -28,17 +28,12 @@
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
-#include <mach/anubis-map.h>
-#include <mach/anubis-irq.h>
-#include <mach/anubis-cpld.h>
-
#include <mach/hardware.h>
#include <asm/irq.h>
#include <asm/mach-types.h>
#include <plat/regs-serial.h>
#include <mach/regs-gpio.h>
-#include <mach/regs-mem.h>
#include <mach/regs-lcd.h>
#include <linux/platform_data/mtd-nand-s3c2410.h>
#include <linux/platform_data/i2c-s3c2410.h>
@@ -55,8 +50,9 @@
#include <plat/cpu.h>
#include <linux/platform_data/asoc-s3c24xx_simtec.h>
-#include "simtec.h"
+#include "anubis.h"
#include "common.h"
+#include "simtec.h"
#define COPYRIGHT ", Copyright 2005-2009 Simtec Electronics"
@@ -237,7 +233,7 @@
static struct resource anubis_ide0_resource[] = {
[0] = DEFINE_RES_MEM(S3C2410_CS3, 8 * 32),
[2] = DEFINE_RES_MEM(S3C2410_CS3 + (1 << 26) + (6 * 32), 32),
- [3] = DEFINE_RES_IRQ(IRQ_IDE0),
+ [3] = DEFINE_RES_IRQ(ANUBIS_IRQ_IDE0),
};
static struct platform_device anubis_device_ide0 = {
@@ -254,7 +250,7 @@
static struct resource anubis_ide1_resource[] = {
[0] = DEFINE_RES_MEM(S3C2410_CS4, 8 * 32),
[1] = DEFINE_RES_MEM(S3C2410_CS4 + (1 << 26) + (6 * 32), 32),
- [2] = DEFINE_RES_IRQ(IRQ_IDE0),
+ [2] = DEFINE_RES_IRQ(ANUBIS_IRQ_IDE0),
};
static struct platform_device anubis_device_ide1 = {
@@ -279,7 +275,7 @@
static struct resource anubis_asix_resource[] = {
[0] = DEFINE_RES_MEM(S3C2410_CS5, 0x20 * 0x20),
- [1] = DEFINE_RES_IRQ(IRQ_ASIX),
+ [1] = DEFINE_RES_IRQ(ANUBIS_IRQ_ASIX),
};
static struct platform_device anubis_device_asix = {
@@ -448,6 +444,6 @@
.map_io = anubis_map_io,
.init_machine = anubis_init,
.init_irq = s3c24xx_init_irq,
- .timer = &s3c24xx_timer,
+ .init_time = s3c24xx_timer_init,
.restart = s3c244x_restart,
MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-at2440evb.c b/arch/arm/mach-s3c24xx/mach-at2440evb.c
index 00381fe..b4bc60c 100644
--- a/arch/arm/mach-s3c24xx/mach-at2440evb.c
+++ b/arch/arm/mach-s3c24xx/mach-at2440evb.c
@@ -14,6 +14,7 @@
#include <linux/kernel.h>
#include <linux/types.h>
+#include <linux/gpio.h>
#include <linux/interrupt.h>
#include <linux/list.h>
#include <linux/timer.h>
@@ -34,7 +35,6 @@
#include <plat/regs-serial.h>
#include <mach/regs-gpio.h>
-#include <mach/regs-mem.h>
#include <mach/regs-lcd.h>
#include <linux/platform_data/mtd-nand-s3c2410.h>
#include <linux/platform_data/i2c-s3c2410.h>
@@ -210,6 +210,6 @@
.map_io = at2440evb_map_io,
.init_machine = at2440evb_init,
.init_irq = s3c24xx_init_irq,
- .timer = &s3c24xx_timer,
+ .init_time = s3c24xx_timer_init,
.restart = s3c244x_restart,
MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-bast.c b/arch/arm/mach-s3c24xx/mach-bast.c
index 6a30ce7..ca66180 100644
--- a/arch/arm/mach-s3c24xx/mach-bast.c
+++ b/arch/arm/mach-s3c24xx/mach-bast.c
@@ -24,48 +24,41 @@
#include <linux/ata_platform.h>
#include <linux/i2c.h>
#include <linux/io.h>
-
-#include <net/ax88796.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <mach/bast-map.h>
-#include <mach/bast-irq.h>
-#include <mach/bast-cpld.h>
-
-#include <mach/hardware.h>
-#include <asm/irq.h>
-#include <asm/mach-types.h>
-
-//#include <asm/debug-ll.h>
-#include <plat/regs-serial.h>
-#include <mach/regs-gpio.h>
-#include <mach/regs-mem.h>
-#include <mach/regs-lcd.h>
-
-#include <linux/platform_data/hwmon-s3c.h>
-#include <linux/platform_data/mtd-nand-s3c2410.h>
-#include <linux/platform_data/i2c-s3c2410.h>
-#include <mach/fb.h>
+#include <linux/serial_8250.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/nand.h>
#include <linux/mtd/nand_ecc.h>
#include <linux/mtd/partitions.h>
-#include <linux/serial_8250.h>
+#include <linux/platform_data/asoc-s3c24xx_simtec.h>
+#include <linux/platform_data/hwmon-s3c.h>
+#include <linux/platform_data/i2c-s3c2410.h>
+#include <linux/platform_data/mtd-nand-s3c2410.h>
+
+#include <net/ax88796.h>
+
+#include <asm/irq.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+#include <asm/mach-types.h>
+
+#include <mach/fb.h>
+#include <mach/hardware.h>
+#include <mach/regs-gpio.h>
+#include <mach/regs-lcd.h>
#include <plat/clock.h>
-#include <plat/devs.h>
#include <plat/cpu.h>
#include <plat/cpu-freq.h>
+#include <plat/devs.h>
#include <plat/gpio-cfg.h>
-#include <linux/platform_data/asoc-s3c24xx_simtec.h>
+#include <plat/regs-serial.h>
-#include "simtec.h"
+#include "bast.h"
#include "common.h"
+#include "simtec.h"
#define COPYRIGHT ", Copyright 2004-2008 Simtec Electronics"
@@ -312,7 +305,7 @@
static struct resource bast_dm9k_resource[] = {
[0] = DEFINE_RES_MEM(S3C2410_CS5 + BAST_PA_DM9000, 4),
[1] = DEFINE_RES_MEM(S3C2410_CS5 + BAST_PA_DM9000 + 0x40, 0x40),
- [2] = DEFINE_RES_NAMED(IRQ_DM9000 , 1, NULL, IORESOURCE_IRQ \
+ [2] = DEFINE_RES_NAMED(BAST_IRQ_DM9000 , 1, NULL, IORESOURCE_IRQ \
| IORESOURCE_IRQ_HIGHLEVEL),
};
@@ -343,7 +336,7 @@
static struct plat_serial8250_port bast_sio_data[] = {
[0] = {
.mapbase = SERIAL_BASE + 0x2f8,
- .irq = IRQ_PCSERIAL1,
+ .irq = BAST_IRQ_PCSERIAL1,
.flags = SERIAL_FLAGS,
.iotype = UPIO_MEM,
.regshift = 0,
@@ -351,7 +344,7 @@
},
[1] = {
.mapbase = SERIAL_BASE + 0x3f8,
- .irq = IRQ_PCSERIAL2,
+ .irq = BAST_IRQ_PCSERIAL2,
.flags = SERIAL_FLAGS,
.iotype = UPIO_MEM,
.regshift = 0,
@@ -390,7 +383,7 @@
static struct resource bast_asix_resource[] = {
[0] = DEFINE_RES_MEM(S3C2410_CS5 + BAST_PA_ASIXNET, 0x18 * 0x20),
[1] = DEFINE_RES_MEM(S3C2410_CS5 + BAST_PA_ASIXNET + (0x1f * 0x20), 1),
- [2] = DEFINE_RES_IRQ(IRQ_ASIX),
+ [2] = DEFINE_RES_IRQ(BAST_IRQ_ASIX),
};
static struct platform_device bast_device_asix = {
@@ -612,6 +605,6 @@
.map_io = bast_map_io,
.init_irq = s3c24xx_init_irq,
.init_machine = bast_init,
- .timer = &s3c24xx_timer,
+ .init_time = s3c24xx_timer_init,
.restart = s3c2410_restart,
MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-gta02.c b/arch/arm/mach-s3c24xx/mach-gta02.c
index 973b87c..a25e8c5 100644
--- a/arch/arm/mach-s3c24xx/mach-gta02.c
+++ b/arch/arm/mach-s3c24xx/mach-gta02.c
@@ -1,6 +1,4 @@
/*
- * linux/arch/arm/mach-s3c2442/mach-gta02.c
- *
* S3C2442 Machine Support for Openmoko GTA02 / FreeRunner.
*
* Copyright (C) 2006-2009 by Openmoko, Inc.
@@ -23,7 +21,6 @@
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
- *
*/
#include <linux/kernel.h>
@@ -34,62 +31,59 @@
#include <linux/timer.h>
#include <linux/init.h>
#include <linux/gpio.h>
+#include <linux/gpio_keys.h>
#include <linux/workqueue.h>
#include <linux/platform_device.h>
#include <linux/serial_core.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/s3c24xx.h>
+#include <linux/input.h>
+#include <linux/io.h>
+#include <linux/i2c.h>
#include <linux/mmc/host.h>
+#include <linux/mfd/pcf50633/adc.h>
+#include <linux/mfd/pcf50633/backlight.h>
+#include <linux/mfd/pcf50633/core.h>
+#include <linux/mfd/pcf50633/gpio.h>
+#include <linux/mfd/pcf50633/mbc.h>
+#include <linux/mfd/pcf50633/pmic.h>
+
#include <linux/mtd/mtd.h>
#include <linux/mtd/nand.h>
#include <linux/mtd/nand_ecc.h>
#include <linux/mtd/partitions.h>
#include <linux/mtd/physmap.h>
-#include <linux/io.h>
-#include <linux/i2c.h>
#include <linux/regulator/machine.h>
-#include <linux/mfd/pcf50633/core.h>
-#include <linux/mfd/pcf50633/mbc.h>
-#include <linux/mfd/pcf50633/adc.h>
-#include <linux/mfd/pcf50633/gpio.h>
-#include <linux/mfd/pcf50633/pmic.h>
-#include <linux/mfd/pcf50633/backlight.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/s3c24xx.h>
-#include <linux/input.h>
-#include <linux/gpio_keys.h>
-
+#include <asm/irq.h>
+#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
-#include <asm/irq.h>
-#include <asm/mach-types.h>
-
-#include <mach/regs-irq.h>
-#include <mach/regs-gpio.h>
-#include <mach/fb.h>
-
-#include <linux/platform_data/usb-ohci-s3c2410.h>
-#include <mach/regs-mem.h>
-#include <mach/hardware.h>
-
-#include <mach/gta02.h>
-
-#include <plat/regs-serial.h>
-#include <linux/platform_data/mtd-nand-s3c2410.h>
-#include <plat/devs.h>
-#include <plat/cpu.h>
-#include <plat/pm.h>
-#include <linux/platform_data/usb-s3c2410_udc.h>
-#include <plat/gpio-cfg.h>
#include <linux/platform_data/i2c-s3c2410.h>
+#include <linux/platform_data/mtd-nand-s3c2410.h>
#include <linux/platform_data/touchscreen-s3c2410.h>
+#include <linux/platform_data/usb-ohci-s3c2410.h>
+#include <linux/platform_data/usb-s3c2410_udc.h>
+
+#include <mach/fb.h>
+#include <mach/hardware.h>
+#include <mach/regs-gpio.h>
+#include <mach/regs-irq.h>
+
+#include <plat/cpu.h>
+#include <plat/devs.h>
+#include <plat/gpio-cfg.h>
+#include <plat/pm.h>
+#include <plat/regs-serial.h>
#include "common.h"
+#include "gta02.h"
static struct pcf50633 *gta02_pcf;
@@ -595,6 +589,6 @@
.map_io = gta02_map_io,
.init_irq = s3c24xx_init_irq,
.init_machine = gta02_machine_init,
- .timer = &s3c24xx_timer,
+ .init_time = s3c24xx_timer_init,
.restart = s3c244x_restart,
MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-h1940.c b/arch/arm/mach-s3c24xx/mach-h1940.c
index b23dd1b..79bc083 100644
--- a/arch/arm/mach-s3c24xx/mach-h1940.c
+++ b/arch/arm/mach-s3c24xx/mach-h1940.c
@@ -1,5 +1,4 @@
-/* linux/arch/arm/mach-s3c2410/mach-h1940.c
- *
+/*
* Copyright (c) 2003-2005 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
*
@@ -37,40 +36,36 @@
#include <linux/mmc/host.h>
#include <linux/export.h>
+#include <asm/irq.h>
+#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
-#include <mach/hardware.h>
-#include <asm/irq.h>
-#include <asm/mach-types.h>
-
-#include <plat/regs-serial.h>
-#include <mach/regs-lcd.h>
-#include <mach/regs-clock.h>
-
-#include <mach/regs-gpio.h>
-#include <mach/gpio-fns.h>
-#include <mach/gpio-nrs.h>
-
-#include <mach/h1940.h>
-#include <mach/h1940-latch.h>
-#include <mach/fb.h>
-#include <linux/platform_data/usb-s3c2410_udc.h>
#include <linux/platform_data/i2c-s3c2410.h>
-
-#include <plat/gpio-cfg.h>
-#include <plat/clock.h>
-#include <plat/devs.h>
-#include <plat/cpu.h>
-#include <plat/pll.h>
-#include <plat/pm.h>
#include <linux/platform_data/mmc-s3cmci.h>
#include <linux/platform_data/touchscreen-s3c2410.h>
+#include <linux/platform_data/usb-s3c2410_udc.h>
#include <sound/uda1380.h>
+#include <mach/fb.h>
+#include <mach/hardware.h>
+#include <mach/regs-clock.h>
+#include <mach/regs-gpio.h>
+#include <mach/regs-lcd.h>
+
+#include <plat/clock.h>
+#include <plat/cpu.h>
+#include <plat/devs.h>
+#include <plat/gpio-cfg.h>
+#include <plat/pll.h>
+#include <plat/pm.h>
+#include <plat/regs-serial.h>
+
+
#include "common.h"
+#include "h1940.h"
#define H1940_LATCH ((void __force __iomem *)0xF8000000)
@@ -746,6 +741,6 @@
.reserve = h1940_reserve,
.init_irq = h1940_init_irq,
.init_machine = h1940_init,
- .timer = &s3c24xx_timer,
+ .init_time = s3c24xx_timer_init,
.restart = s3c2410_restart,
MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-jive.c b/arch/arm/mach-s3c24xx/mach-jive.c
index c9954e2..54e83c1 100644
--- a/arch/arm/mach-s3c24xx/mach-jive.c
+++ b/arch/arm/mach-s3c24xx/mach-jive.c
@@ -35,9 +35,7 @@
#include <linux/platform_data/mtd-nand-s3c2410.h>
#include <linux/platform_data/i2c-s3c2410.h>
-#include <mach/regs-power.h>
#include <mach/regs-gpio.h>
-#include <mach/regs-mem.h>
#include <mach/regs-lcd.h>
#include <mach/fb.h>
@@ -56,6 +54,8 @@
#include <plat/pm.h>
#include <linux/platform_data/usb-s3c2410_udc.h>
+#include "s3c2412-power.h"
+
static struct map_desc jive_iodesc[] __initdata = {
};
@@ -661,6 +661,6 @@
.init_irq = s3c24xx_init_irq,
.map_io = jive_map_io,
.init_machine = jive_machine_init,
- .timer = &s3c24xx_timer,
+ .init_time = s3c24xx_timer_init,
.restart = s3c2412_restart,
MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-mini2440.c b/arch/arm/mach-s3c24xx/mach-mini2440.c
index a31d5b8..2865e59 100644
--- a/arch/arm/mach-s3c24xx/mach-mini2440.c
+++ b/arch/arm/mach-s3c24xx/mach-mini2440.c
@@ -40,7 +40,6 @@
#include <plat/regs-serial.h>
#include <mach/regs-gpio.h>
#include <linux/platform_data/leds-s3c24xx.h>
-#include <mach/regs-mem.h>
#include <mach/regs-lcd.h>
#include <mach/irqs.h>
#include <linux/platform_data/mtd-nand-s3c2410.h>
@@ -688,6 +687,6 @@
.map_io = mini2440_map_io,
.init_machine = mini2440_init,
.init_irq = s3c24xx_init_irq,
- .timer = &s3c24xx_timer,
+ .init_time = s3c24xx_timer_init,
.restart = s3c244x_restart,
MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-n30.c b/arch/arm/mach-s3c24xx/mach-n30.c
index c53a9bf..d9d04b2 100644
--- a/arch/arm/mach-s3c24xx/mach-n30.c
+++ b/arch/arm/mach-s3c24xx/mach-n30.c
@@ -589,7 +589,7 @@
Ben Dooks <ben-linux@fluff.org>
*/
.atag_offset = 0x100,
- .timer = &s3c24xx_timer,
+ .init_time = s3c24xx_timer_init,
.init_machine = n30_init,
.init_irq = s3c24xx_init_irq,
.map_io = n30_map_io,
@@ -600,7 +600,7 @@
/* Maintainer: Christer Weinigel <christer@weinigel.se>
*/
.atag_offset = 0x100,
- .timer = &s3c24xx_timer,
+ .init_time = s3c24xx_timer_init,
.init_machine = n30_init,
.init_irq = s3c24xx_init_irq,
.map_io = n30_map_io,
diff --git a/arch/arm/mach-s3c24xx/mach-nexcoder.c b/arch/arm/mach-s3c24xx/mach-nexcoder.c
index a2b92b0..a454e24 100644
--- a/arch/arm/mach-s3c24xx/mach-nexcoder.c
+++ b/arch/arm/mach-s3c24xx/mach-nexcoder.c
@@ -153,6 +153,6 @@
.map_io = nexcoder_map_io,
.init_machine = nexcoder_init,
.init_irq = s3c24xx_init_irq,
- .timer = &s3c24xx_timer,
+ .init_time = s3c24xx_timer_init,
.restart = s3c244x_restart,
MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-osiris.c b/arch/arm/mach-s3c24xx/mach-osiris.c
index c52100e..ae2cbdf 100644
--- a/arch/arm/mach-s3c24xx/mach-osiris.c
+++ b/arch/arm/mach-s3c24xx/mach-osiris.c
@@ -1,5 +1,4 @@
-/* linux/arch/arm/mach-s3c2440/mach-osiris.c
- *
+/*
* Copyright (c) 2005-2008 Simtec Electronics
* http://armlinux.simtec.co.uk/
* Ben Dooks <ben@simtec.co.uk>
@@ -26,22 +25,12 @@
#include <linux/i2c/tps65010.h>
+#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
-
-#include <mach/osiris-map.h>
-#include <mach/osiris-cpld.h>
-
-#include <mach/hardware.h>
#include <asm/irq.h>
-#include <asm/mach-types.h>
-#include <plat/cpu-freq.h>
-#include <plat/regs-serial.h>
-#include <mach/regs-gpio.h>
-#include <mach/regs-mem.h>
-#include <mach/regs-lcd.h>
#include <linux/platform_data/mtd-nand-s3c2410.h>
#include <linux/platform_data/i2c-s3c2410.h>
@@ -50,12 +39,20 @@
#include <linux/mtd/nand_ecc.h>
#include <linux/mtd/partitions.h>
-#include <plat/gpio-cfg.h>
#include <plat/clock.h>
-#include <plat/devs.h>
#include <plat/cpu.h>
+#include <plat/cpu-freq.h>
+#include <plat/devs.h>
+#include <plat/gpio-cfg.h>
+#include <plat/regs-serial.h>
+
+#include <mach/hardware.h>
+#include <mach/regs-gpio.h>
+#include <mach/regs-lcd.h>
#include "common.h"
+#include "osiris.h"
+#include "regs-mem.h"
/* onboard perihperal map */
@@ -429,6 +426,6 @@
.map_io = osiris_map_io,
.init_irq = s3c24xx_init_irq,
.init_machine = osiris_init,
- .timer = &s3c24xx_timer,
+ .init_time = s3c24xx_timer_init,
.restart = s3c244x_restart,
MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-otom.c b/arch/arm/mach-s3c24xx/mach-otom.c
index bca39f0..40a47d6 100644
--- a/arch/arm/mach-s3c24xx/mach-otom.c
+++ b/arch/arm/mach-s3c24xx/mach-otom.c
@@ -1,4 +1,4 @@
-/* linux/arch/arm/mach-s3c2410/mach-otom.c
+/*
*
* Copyright (c) 2004 Nex Vision
* Guillaume GOURAT <guillaume.gourat@nexvision.fr>
@@ -6,7 +6,6 @@
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
- *
*/
#include <linux/kernel.h>
@@ -19,26 +18,25 @@
#include <linux/platform_device.h>
#include <linux/io.h>
+#include <linux/platform_data/i2c-s3c2410.h>
+
+#include <asm/irq.h>
+#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
-#include <mach/otom-map.h>
-
#include <mach/hardware.h>
-#include <asm/irq.h>
-#include <asm/mach-types.h>
-
-#include <plat/regs-serial.h>
#include <mach/regs-gpio.h>
-#include <plat/s3c2410.h>
#include <plat/clock.h>
-#include <plat/devs.h>
-#include <linux/platform_data/i2c-s3c2410.h>
#include <plat/cpu.h>
+#include <plat/devs.h>
+#include <plat/regs-serial.h>
+#include <plat/s3c2410.h>
#include "common.h"
+#include "otom.h"
static struct map_desc otom11_iodesc[] __initdata = {
/* Device area */
@@ -118,6 +116,6 @@
.map_io = otom11_map_io,
.init_machine = otom11_init,
.init_irq = s3c24xx_init_irq,
- .timer = &s3c24xx_timer,
+ .init_time = s3c24xx_timer_init,
.restart = s3c2410_restart,
MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-qt2410.c b/arch/arm/mach-s3c24xx/mach-qt2410.c
index 7b6ba13..56175f0 100644
--- a/arch/arm/mach-s3c24xx/mach-qt2410.c
+++ b/arch/arm/mach-s3c24xx/mach-qt2410.c
@@ -343,6 +343,6 @@
.map_io = qt2410_map_io,
.init_irq = s3c24xx_init_irq,
.init_machine = qt2410_machine_init,
- .timer = &s3c24xx_timer,
+ .init_time = s3c24xx_timer_init,
.restart = s3c2410_restart,
MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-rx1950.c b/arch/arm/mach-s3c24xx/mach-rx1950.c
index 0606f2f..1f9ba2a 100644
--- a/arch/arm/mach-s3c24xx/mach-rx1950.c
+++ b/arch/arm/mach-s3c24xx/mach-rx1950.c
@@ -1,5 +1,4 @@
-/* linux/arch/arm/mach-s3c2440/mach-rx1950.c
- *
+/*
* Copyright (c) 2006-2009 Victor Chukhantsev, Denis Grigoriev,
* Copyright (c) 2007-2010 Vasily Khoruzhick
*
@@ -37,31 +36,31 @@
#include <linux/mmc/host.h>
+#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
-#include <asm/mach-types.h>
-#include <mach/regs-gpio.h>
-#include <mach/regs-lcd.h>
-#include <mach/h1940.h>
-#include <mach/fb.h>
-
-#include <plat/clock.h>
-#include <plat/regs-serial.h>
-#include <plat/regs-iic.h>
-#include <linux/platform_data/mmc-s3cmci.h>
-#include <linux/platform_data/usb-s3c2410_udc.h>
-#include <linux/platform_data/mtd-nand-s3c2410.h>
#include <linux/platform_data/i2c-s3c2410.h>
-#include <plat/devs.h>
-#include <plat/cpu.h>
-#include <plat/pm.h>
-#include <plat/irq.h>
+#include <linux/platform_data/mmc-s3cmci.h>
+#include <linux/platform_data/mtd-nand-s3c2410.h>
#include <linux/platform_data/touchscreen-s3c2410.h>
+#include <linux/platform_data/usb-s3c2410_udc.h>
#include <sound/uda1380.h>
+#include <mach/fb.h>
+#include <mach/regs-gpio.h>
+#include <mach/regs-lcd.h>
+
+#include <plat/clock.h>
+#include <plat/cpu.h>
+#include <plat/devs.h>
+#include <plat/pm.h>
+#include <plat/regs-iic.h>
+#include <plat/regs-serial.h>
+
#include "common.h"
+#include "h1940.h"
#define LCD_PWM_PERIOD 192960
#define LCD_PWM_DUTY 127353
@@ -814,6 +813,6 @@
.reserve = rx1950_reserve,
.init_irq = s3c24xx_init_irq,
.init_machine = rx1950_init_machine,
- .timer = &s3c24xx_timer,
+ .init_time = s3c24xx_timer_init,
.restart = s3c244x_restart,
MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-rx3715.c b/arch/arm/mach-s3c24xx/mach-rx3715.c
index dacbb9a..f20418a 100644
--- a/arch/arm/mach-s3c24xx/mach-rx3715.c
+++ b/arch/arm/mach-s3c24xx/mach-rx3715.c
@@ -31,27 +31,27 @@
#include <linux/mtd/partitions.h>
#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
#include <asm/mach/irq.h>
+#include <asm/mach/map.h>
-#include <mach/hardware.h>
+#include <linux/platform_data/mtd-nand-s3c2410.h>
+
#include <asm/irq.h>
#include <asm/mach-types.h>
-#include <plat/regs-serial.h>
+#include <mach/fb.h>
+#include <mach/hardware.h>
#include <mach/regs-gpio.h>
#include <mach/regs-lcd.h>
-#include <mach/h1940.h>
-#include <linux/platform_data/mtd-nand-s3c2410.h>
-#include <mach/fb.h>
-
#include <plat/clock.h>
-#include <plat/devs.h>
#include <plat/cpu.h>
+#include <plat/devs.h>
#include <plat/pm.h>
+#include <plat/regs-serial.h>
#include "common.h"
+#include "h1940.h"
static struct map_desc rx3715_iodesc[] __initdata = {
/* dump ISA space somewhere unused */
@@ -212,6 +212,6 @@
.reserve = rx3715_reserve,
.init_irq = rx3715_init_irq,
.init_machine = rx3715_init_machine,
- .timer = &s3c24xx_timer,
+ .init_time = s3c24xx_timer_init,
.restart = s3c244x_restart,
MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-smdk2410.c b/arch/arm/mach-s3c24xx/mach-smdk2410.c
index 82796b9..e184bfa 100644
--- a/arch/arm/mach-s3c24xx/mach-smdk2410.c
+++ b/arch/arm/mach-s3c24xx/mach-smdk2410.c
@@ -117,6 +117,6 @@
.map_io = smdk2410_map_io,
.init_irq = s3c24xx_init_irq,
.init_machine = smdk2410_init,
- .timer = &s3c24xx_timer,
+ .init_time = s3c24xx_timer_init,
.restart = s3c2410_restart,
MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-smdk2413.c b/arch/arm/mach-s3c24xx/mach-smdk2413.c
index ce99fd8..86d7847 100644
--- a/arch/arm/mach-s3c24xx/mach-smdk2413.c
+++ b/arch/arm/mach-s3c24xx/mach-smdk2413.c
@@ -37,7 +37,6 @@
#include <mach/regs-gpio.h>
#include <mach/regs-lcd.h>
-#include <mach/idle.h>
#include <linux/platform_data/usb-s3c2410_udc.h>
#include <linux/platform_data/i2c-s3c2410.h>
#include <mach/fb.h>
@@ -133,7 +132,7 @@
.init_irq = s3c24xx_init_irq,
.map_io = smdk2413_map_io,
.init_machine = smdk2413_machine_init,
- .timer = &s3c24xx_timer,
+ .init_time = s3c24xx_timer_init,
.restart = s3c2412_restart,
MACHINE_END
@@ -145,7 +144,7 @@
.init_irq = s3c24xx_init_irq,
.map_io = smdk2413_map_io,
.init_machine = smdk2413_machine_init,
- .timer = &s3c24xx_timer,
+ .init_time = s3c24xx_timer_init,
.restart = s3c2412_restart,
MACHINE_END
@@ -157,6 +156,6 @@
.init_irq = s3c24xx_init_irq,
.map_io = smdk2413_map_io,
.init_machine = smdk2413_machine_init,
- .timer = &s3c24xx_timer,
+ .init_time = s3c24xx_timer_init,
.restart = s3c2412_restart,
MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-smdk2416.c b/arch/arm/mach-s3c24xx/mach-smdk2416.c
index f30d7fc..ebb2e61 100644
--- a/arch/arm/mach-s3c24xx/mach-smdk2416.c
+++ b/arch/arm/mach-s3c24xx/mach-smdk2416.c
@@ -39,7 +39,6 @@
#include <mach/regs-lcd.h>
#include <mach/regs-s3c2443-clock.h>
-#include <mach/idle.h>
#include <linux/platform_data/leds-s3c24xx.h>
#include <linux/platform_data/i2c-s3c2410.h>
@@ -251,9 +250,9 @@
/* Maintainer: Yauhen Kharuzhy <jekhor@gmail.com> */
.atag_offset = 0x100,
- .init_irq = s3c24xx_init_irq,
+ .init_irq = s3c2416_init_irq,
.map_io = smdk2416_map_io,
.init_machine = smdk2416_machine_init,
- .timer = &s3c24xx_timer,
+ .init_time = s3c24xx_timer_init,
.restart = s3c2416_restart,
MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-smdk2440.c b/arch/arm/mach-s3c24xx/mach-smdk2440.c
index b7ff882..08cc38c 100644
--- a/arch/arm/mach-s3c24xx/mach-smdk2440.c
+++ b/arch/arm/mach-s3c24xx/mach-smdk2440.c
@@ -35,7 +35,6 @@
#include <mach/regs-gpio.h>
#include <mach/regs-lcd.h>
-#include <mach/idle.h>
#include <mach/fb.h>
#include <linux/platform_data/i2c-s3c2410.h>
@@ -182,6 +181,6 @@
.init_irq = s3c24xx_init_irq,
.map_io = smdk2440_map_io,
.init_machine = smdk2440_machine_init,
- .timer = &s3c24xx_timer,
+ .init_time = s3c24xx_timer_init,
.restart = s3c244x_restart,
MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-smdk2443.c b/arch/arm/mach-s3c24xx/mach-smdk2443.c
index 2568656..fc65d74 100644
--- a/arch/arm/mach-s3c24xx/mach-smdk2443.c
+++ b/arch/arm/mach-s3c24xx/mach-smdk2443.c
@@ -35,7 +35,6 @@
#include <mach/regs-gpio.h>
#include <mach/regs-lcd.h>
-#include <mach/idle.h>
#include <mach/fb.h>
#include <linux/platform_data/i2c-s3c2410.h>
@@ -141,9 +140,9 @@
/* Maintainer: Ben Dooks <ben-linux@fluff.org> */
.atag_offset = 0x100,
- .init_irq = s3c24xx_init_irq,
+ .init_irq = s3c2443_init_irq,
.map_io = smdk2443_map_io,
.init_machine = smdk2443_machine_init,
- .timer = &s3c24xx_timer,
+ .init_time = s3c24xx_timer_init,
.restart = s3c2443_restart,
MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-tct_hammer.c b/arch/arm/mach-s3c24xx/mach-tct_hammer.c
index 495bf5c..24b3d79 100644
--- a/arch/arm/mach-s3c24xx/mach-tct_hammer.c
+++ b/arch/arm/mach-s3c24xx/mach-tct_hammer.c
@@ -149,6 +149,6 @@
.map_io = tct_hammer_map_io,
.init_irq = s3c24xx_init_irq,
.init_machine = tct_hammer_init,
- .timer = &s3c24xx_timer,
+ .init_time = s3c24xx_timer_init,
.restart = s3c2410_restart,
MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-vr1000.c b/arch/arm/mach-s3c24xx/mach-vr1000.c
index 14d5b12..ec42d1e 100644
--- a/arch/arm/mach-s3c24xx/mach-vr1000.c
+++ b/arch/arm/mach-s3c24xx/mach-vr1000.c
@@ -1,5 +1,4 @@
-/* linux/arch/arm/mach-s3c2410/mach-vr1000.c
- *
+/*
* Copyright (c) 2003-2008 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
*
@@ -32,27 +31,25 @@
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
-#include <mach/bast-map.h>
-#include <mach/vr1000-map.h>
-#include <mach/vr1000-irq.h>
-#include <mach/vr1000-cpld.h>
-
-#include <mach/hardware.h>
#include <asm/irq.h>
#include <asm/mach-types.h>
-#include <plat/regs-serial.h>
-#include <mach/regs-gpio.h>
#include <linux/platform_data/leds-s3c24xx.h>
-
-#include <plat/clock.h>
-#include <plat/devs.h>
-#include <plat/cpu.h>
#include <linux/platform_data/i2c-s3c2410.h>
#include <linux/platform_data/asoc-s3c24xx_simtec.h>
-#include "simtec.h"
+#include <mach/hardware.h>
+#include <mach/regs-gpio.h>
+
+#include <plat/clock.h>
+#include <plat/cpu.h>
+#include <plat/devs.h>
+#include <plat/regs-serial.h>
+
+#include "bast.h"
#include "common.h"
+#include "simtec.h"
+#include "vr1000.h"
/* macros for virtual address mods for the io space entries */
#define VA_C5(item) ((unsigned long)(item) + BAST_VAM_CS5)
@@ -143,7 +140,7 @@
static struct plat_serial8250_port serial_platform_data[] = {
[0] = {
.mapbase = VR1000_SERIAL_MAPBASE(0),
- .irq = IRQ_VR1000_SERIAL + 0,
+ .irq = VR1000_IRQ_SERIAL + 0,
.flags = UPF_BOOT_AUTOCONF | UPF_IOREMAP,
.iotype = UPIO_MEM,
.regshift = 0,
@@ -151,7 +148,7 @@
},
[1] = {
.mapbase = VR1000_SERIAL_MAPBASE(1),
- .irq = IRQ_VR1000_SERIAL + 1,
+ .irq = VR1000_IRQ_SERIAL + 1,
.flags = UPF_BOOT_AUTOCONF | UPF_IOREMAP,
.iotype = UPIO_MEM,
.regshift = 0,
@@ -159,7 +156,7 @@
},
[2] = {
.mapbase = VR1000_SERIAL_MAPBASE(2),
- .irq = IRQ_VR1000_SERIAL + 2,
+ .irq = VR1000_IRQ_SERIAL + 2,
.flags = UPF_BOOT_AUTOCONF | UPF_IOREMAP,
.iotype = UPIO_MEM,
.regshift = 0,
@@ -167,7 +164,7 @@
},
[3] = {
.mapbase = VR1000_SERIAL_MAPBASE(3),
- .irq = IRQ_VR1000_SERIAL + 3,
+ .irq = VR1000_IRQ_SERIAL + 3,
.flags = UPF_BOOT_AUTOCONF | UPF_IOREMAP,
.iotype = UPIO_MEM,
.regshift = 0,
@@ -189,14 +186,14 @@
static struct resource vr1000_dm9k0_resource[] = {
[0] = DEFINE_RES_MEM(S3C2410_CS5 + VR1000_PA_DM9000, 4),
[1] = DEFINE_RES_MEM(S3C2410_CS5 + VR1000_PA_DM9000 + 0x40, 0x40),
- [2] = DEFINE_RES_NAMED(IRQ_VR1000_DM9000A, 1, NULL, IORESOURCE_IRQ \
+ [2] = DEFINE_RES_NAMED(VR1000_IRQ_DM9000A, 1, NULL, IORESOURCE_IRQ \
| IORESOURCE_IRQ_HIGHLEVEL),
};
static struct resource vr1000_dm9k1_resource[] = {
[0] = DEFINE_RES_MEM(S3C2410_CS5 + VR1000_PA_DM9000 + 0x80, 4),
[1] = DEFINE_RES_MEM(S3C2410_CS5 + VR1000_PA_DM9000 + 0xC0, 0x40),
- [2] = DEFINE_RES_NAMED(IRQ_VR1000_DM9000N, 1, NULL, IORESOURCE_IRQ \
+ [2] = DEFINE_RES_NAMED(VR1000_IRQ_DM9000N, 1, NULL, IORESOURCE_IRQ \
| IORESOURCE_IRQ_HIGHLEVEL),
};
@@ -357,6 +354,6 @@
.map_io = vr1000_map_io,
.init_machine = vr1000_init,
.init_irq = s3c24xx_init_irq,
- .timer = &s3c24xx_timer,
+ .init_time = s3c24xx_timer_init,
.restart = s3c2410_restart,
MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-vstms.c b/arch/arm/mach-s3c24xx/mach-vstms.c
index f1d44ae..3e2bfdd 100644
--- a/arch/arm/mach-s3c24xx/mach-vstms.c
+++ b/arch/arm/mach-s3c24xx/mach-vstms.c
@@ -36,7 +36,6 @@
#include <mach/regs-gpio.h>
#include <mach/regs-lcd.h>
-#include <mach/idle.h>
#include <mach/fb.h>
#include <linux/platform_data/i2c-s3c2410.h>
@@ -161,6 +160,6 @@
.init_irq = s3c24xx_init_irq,
.init_machine = vstms_init,
.map_io = vstms_map_io,
- .timer = &s3c24xx_timer,
+ .init_time = s3c24xx_timer_init,
.restart = s3c2412_restart,
MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/include/mach/osiris-map.h b/arch/arm/mach-s3c24xx/osiris.h
similarity index 68%
rename from arch/arm/mach-s3c24xx/include/mach/osiris-map.h
rename to arch/arm/mach-s3c24xx/osiris.h
index 17380f8..b8d5607 100644
--- a/arch/arm/mach-s3c24xx/include/mach/osiris-map.h
+++ b/arch/arm/mach-s3c24xx/osiris.h
@@ -1,9 +1,9 @@
-/* arch/arm/mach-s3c2410/include/mach/osiris-map.h
- *
+/*
* Copyright 2005 Simtec Electronics
* http://www.simtec.co.uk/products/
* Ben Dooks <ben@simtec.co.uk>
*
+ * OSIRIS - CPLD control constants
* OSIRIS - Memory map definitions
*
* This program is free software; you can redistribute it and/or modify
@@ -11,10 +11,21 @@
* published by the Free Software Foundation.
*/
-/* needs arch/map.h including with this */
+#ifndef __MACH_S3C24XX_OSIRIS_H
+#define __MACH_S3C24XX_OSIRIS_H __FILE__
-#ifndef __ASM_ARCH_OSIRISMAP_H
-#define __ASM_ARCH_OSIRISMAP_H
+/* CTRL0 - NAND WP control */
+
+#define OSIRIS_CTRL0_NANDSEL (0x3)
+#define OSIRIS_CTRL0_BOOT_INT (1<<3)
+#define OSIRIS_CTRL0_PCMCIA (1<<4)
+#define OSIRIS_CTRL0_FIX8 (1<<5)
+#define OSIRIS_CTRL0_PCMCIA_nWAIT (1<<6)
+#define OSIRIS_CTRL0_PCMCIA_nIOIS16 (1<<7)
+
+#define OSIRIS_CTRL1_FIX8 (1<<0)
+
+#define OSIRIS_ID_REVMASK (0x7)
/* start peripherals off after the S3C2410 */
@@ -39,4 +50,4 @@
#define OSIRIS_VA_IDREG OSIRIS_IOADDR(0x00700000)
#define OSIRIS_PA_IDREG (OSIRIS_PA_CPLD + (7<<23))
-#endif /* __ASM_ARCH_OSIRISMAP_H */
+#endif /* __MACH_S3C24XX_OSIRIS_H */
diff --git a/arch/arm/mach-s3c24xx/otom.h b/arch/arm/mach-s3c24xx/otom.h
new file mode 100644
index 0000000..321b7be
--- /dev/null
+++ b/arch/arm/mach-s3c24xx/otom.h
@@ -0,0 +1,28 @@
+/*
+ * (c) 2005 Guillaume GOURAT / NexVision
+ * guillaume.gourat@nexvision.fr
+ *
+ * NexVision OTOM board memory map definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/*
+ * ok, we've used up to 0x01300000, now we need to find space for the
+ * peripherals that live in the nGCS[x] areas, which are quite numerous
+ * in their space.
+ */
+
+#ifndef __MACH_S3C24XX_OTOM_H
+#define __MACH_S3C24XX_OTOM_H __FILE__
+
+#define OTOM_PA_CS8900A_BASE (S3C2410_CS3 + 0x01000000) /* nGCS3 +0x01000000 */
+#define OTOM_VA_CS8900A_BASE S3C2410_ADDR(0x04000000) /* 0xF4000000 */
+
+/* physical offset addresses for the peripherals */
+
+#define OTOM_PA_FLASH0_BASE (S3C2410_CS0)
+
+#endif /* __MACH_S3C24XX_OTOM_H */
diff --git a/arch/arm/mach-s3c2410/pll.c b/arch/arm/mach-s3c24xx/pll-s3c2410.c
similarity index 98%
rename from arch/arm/mach-s3c2410/pll.c
rename to arch/arm/mach-s3c24xx/pll-s3c2410.c
index e0b3b34..dcf3420 100644
--- a/arch/arm/mach-s3c2410/pll.c
+++ b/arch/arm/mach-s3c24xx/pll-s3c2410.c
@@ -1,5 +1,4 @@
-/* arch/arm/mach-s3c2410/pll.c
- *
+/*
* Copyright (c) 2006-2007 Simtec Electronics
* http://armlinux.simtec.co.uk/
* Ben Dooks <ben@simtec.co.uk>
@@ -82,7 +81,6 @@
return subsys_interface_register(&s3c2410_plls_interface);
}
-
arch_initcall(s3c2410_pll_init);
static struct subsys_interface s3c2410a_plls_interface = {
@@ -95,5 +93,4 @@
{
return subsys_interface_register(&s3c2410a_plls_interface);
}
-
arch_initcall(s3c2410a_pll_init);
diff --git a/arch/arm/mach-s3c2440/s3c2440-pll-12000000.c b/arch/arm/mach-s3c24xx/pll-s3c2440-12000000.c
similarity index 98%
rename from arch/arm/mach-s3c2440/s3c2440-pll-12000000.c
rename to arch/arm/mach-s3c24xx/pll-s3c2440-12000000.c
index 551fb43..6737817 100644
--- a/arch/arm/mach-s3c2440/s3c2440-pll-12000000.c
+++ b/arch/arm/mach-s3c24xx/pll-s3c2440-12000000.c
@@ -1,5 +1,4 @@
-/* arch/arm/mach-s3c2440/s3c2440-pll-12000000.c
- *
+/*
* Copyright (c) 2006-2007 Simtec Electronics
* http://armlinux.simtec.co.uk/
* Ben Dooks <ben@simtec.co.uk>
@@ -83,7 +82,6 @@
return subsys_interface_register(&s3c2440_plls12_interface);
}
-
arch_initcall(s3c2440_pll_12mhz);
static struct subsys_interface s3c2442_plls12_interface = {
@@ -97,5 +95,4 @@
return subsys_interface_register(&s3c2442_plls12_interface);
}
-
arch_initcall(s3c2442_pll_12mhz);
diff --git a/arch/arm/mach-s3c2440/s3c2440-pll-16934400.c b/arch/arm/mach-s3c24xx/pll-s3c2440-16934400.c
similarity index 98%
rename from arch/arm/mach-s3c2440/s3c2440-pll-16934400.c
rename to arch/arm/mach-s3c24xx/pll-s3c2440-16934400.c
index 3f15bcf..debfa10 100644
--- a/arch/arm/mach-s3c2440/s3c2440-pll-16934400.c
+++ b/arch/arm/mach-s3c24xx/pll-s3c2440-16934400.c
@@ -1,5 +1,4 @@
-/* arch/arm/mach-s3c2440/s3c2440-pll-16934400.c
- *
+/*
* Copyright (c) 2006-2008 Simtec Electronics
* http://armlinux.simtec.co.uk/
* Ben Dooks <ben@simtec.co.uk>
@@ -111,7 +110,6 @@
{
return subsys_interface_register(&s3c2440_plls169344_interface);
}
-
arch_initcall(s3c2440_pll_16934400);
static struct subsys_interface s3c2442_plls169344_interface = {
@@ -124,5 +122,4 @@
{
return subsys_interface_register(&s3c2442_plls169344_interface);
}
-
arch_initcall(s3c2442_pll_16934400);
diff --git a/arch/arm/mach-s3c24xx/pm-s3c2410.c b/arch/arm/mach-s3c24xx/pm-s3c2410.c
index 949ae05..2d82c4f 100644
--- a/arch/arm/mach-s3c24xx/pm-s3c2410.c
+++ b/arch/arm/mach-s3c24xx/pm-s3c2410.c
@@ -29,16 +29,16 @@
#include <linux/gpio.h>
#include <linux/io.h>
-#include <mach/hardware.h>
-
#include <asm/mach-types.h>
+#include <mach/hardware.h>
#include <mach/regs-gpio.h>
-#include <mach/h1940.h>
#include <plat/cpu.h>
#include <plat/pm.h>
+#include "h1940.h"
+
static void s3c2410_pm_prepare(void)
{
/* ensure at least GSTATUS3 has the resume address */
diff --git a/arch/arm/mach-s3c24xx/pm-s3c2412.c b/arch/arm/mach-s3c24xx/pm-s3c2412.c
index f5dc2b2..668a78a 100644
--- a/arch/arm/mach-s3c24xx/pm-s3c2412.c
+++ b/arch/arm/mach-s3c24xx/pm-s3c2412.c
@@ -21,19 +21,19 @@
#include <linux/platform_device.h>
#include <linux/io.h>
-#include <mach/hardware.h>
#include <asm/cacheflush.h>
#include <asm/irq.h>
-#include <mach/regs-power.h>
+#include <mach/hardware.h>
#include <mach/regs-gpio.h>
-#include <mach/regs-dsc.h>
#include <plat/cpu.h>
#include <plat/pm.h>
-
#include <plat/s3c2412.h>
+#include "regs-dsc.h"
+#include "s3c2412-power.h"
+
extern void s3c2412_sleep_enter(void);
static int s3c2412_cpu_suspend(unsigned long arg)
diff --git a/arch/arm/mach-s3c24xx/pm-s3c2416.c b/arch/arm/mach-s3c24xx/pm-s3c2416.c
index 1a9e8dd..4492389 100644
--- a/arch/arm/mach-s3c24xx/pm-s3c2416.c
+++ b/arch/arm/mach-s3c24xx/pm-s3c2416.c
@@ -16,12 +16,13 @@
#include <asm/cacheflush.h>
-#include <mach/regs-power.h>
#include <mach/regs-s3c2443-clock.h>
#include <plat/cpu.h>
#include <plat/pm.h>
+#include "s3c2412-power.h"
+
extern void s3c2412_sleep_enter(void);
static int s3c2416_cpu_suspend(unsigned long arg)
diff --git a/arch/arm/mach-s3c24xx/pm.c b/arch/arm/mach-s3c24xx/pm.c
index 724755f..caa5b72 100644
--- a/arch/arm/mach-s3c24xx/pm.c
+++ b/arch/arm/mach-s3c24xx/pm.c
@@ -38,7 +38,6 @@
#include <plat/regs-serial.h>
#include <mach/regs-clock.h>
#include <mach/regs-gpio.h>
-#include <mach/regs-mem.h>
#include <mach/regs-irq.h>
#include <asm/mach/time.h>
@@ -46,6 +45,8 @@
#include <plat/gpio-cfg.h>
#include <plat/pm.h>
+#include "regs-mem.h"
+
#define PFX "s3c24xx-pm: "
static struct sleep_save core_save[] = {
diff --git a/arch/arm/mach-s3c24xx/include/mach/regs-dsc.h b/arch/arm/mach-s3c24xx/regs-dsc.h
similarity index 100%
rename from arch/arm/mach-s3c24xx/include/mach/regs-dsc.h
rename to arch/arm/mach-s3c24xx/regs-dsc.h
diff --git a/arch/arm/mach-s3c24xx/regs-mem.h b/arch/arm/mach-s3c24xx/regs-mem.h
new file mode 100644
index 0000000..86b1258
--- /dev/null
+++ b/arch/arm/mach-s3c24xx/regs-mem.h
@@ -0,0 +1,54 @@
+/*
+ * Copyright (c) 2004 Simtec Electronics <linux@simtec.co.uk>
+ * http://www.simtec.co.uk/products/SWLINUX/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * S3C2410 Memory Control register definitions
+ */
+
+#ifndef __ARCH_ARM_MACH_S3C24XX_REGS_MEM_H
+#define __ARCH_ARM_MACH_S3C24XX_REGS_MEM_H __FILE__
+
+#define S3C2410_MEMREG(x) (S3C24XX_VA_MEMCTRL + (x))
+
+#define S3C2410_BWSCON S3C2410_MEMREG(0x00)
+#define S3C2410_BANKCON0 S3C2410_MEMREG(0x04)
+#define S3C2410_BANKCON1 S3C2410_MEMREG(0x08)
+#define S3C2410_BANKCON2 S3C2410_MEMREG(0x0C)
+#define S3C2410_BANKCON3 S3C2410_MEMREG(0x10)
+#define S3C2410_BANKCON4 S3C2410_MEMREG(0x14)
+#define S3C2410_BANKCON5 S3C2410_MEMREG(0x18)
+#define S3C2410_BANKCON6 S3C2410_MEMREG(0x1C)
+#define S3C2410_BANKCON7 S3C2410_MEMREG(0x20)
+#define S3C2410_REFRESH S3C2410_MEMREG(0x24)
+#define S3C2410_BANKSIZE S3C2410_MEMREG(0x28)
+
+#define S3C2410_BWSCON_ST1 (1 << 7)
+#define S3C2410_BWSCON_ST2 (1 << 11)
+#define S3C2410_BWSCON_ST3 (1 << 15)
+#define S3C2410_BWSCON_ST4 (1 << 19)
+#define S3C2410_BWSCON_ST5 (1 << 23)
+
+#define S3C2410_BWSCON_GET(_bwscon, _bank) (((_bwscon) >> ((_bank) * 4)) & 0xf)
+
+#define S3C2410_BWSCON_WS (1 << 2)
+
+#define S3C2410_BANKCON_PMC16 (0x3)
+
+#define S3C2410_BANKCON_Tacp_SHIFT (2)
+#define S3C2410_BANKCON_Tcah_SHIFT (4)
+#define S3C2410_BANKCON_Tcoh_SHIFT (6)
+#define S3C2410_BANKCON_Tacc_SHIFT (8)
+#define S3C2410_BANKCON_Tcos_SHIFT (11)
+#define S3C2410_BANKCON_Tacs_SHIFT (13)
+
+#define S3C2410_BANKCON_SDRAM (0x3 << 15)
+
+#define S3C2410_REFRESH_SELF (1 << 22)
+
+#define S3C2410_BANKSIZE_MASK (0x7 << 0)
+
+#endif /* __ARCH_ARM_MACH_S3C24XX_REGS_MEM_H */
diff --git a/arch/arm/mach-s3c24xx/s3c2410.c b/arch/arm/mach-s3c24xx/s3c2410.c
index a3c5cb0..9ebef95 100644
--- a/arch/arm/mach-s3c24xx/s3c2410.c
+++ b/arch/arm/mach-s3c24xx/s3c2410.c
@@ -49,6 +49,8 @@
#include <plat/gpio-cfg.h>
#include <plat/gpio-cfg-helpers.h>
+#include "common.h"
+
/* Initial IO mappings */
static struct map_desc s3c2410_iodesc[] __initdata = {
@@ -182,8 +184,8 @@
#ifdef CONFIG_PM
register_syscore_ops(&s3c2410_pm_syscore_ops);
-#endif
register_syscore_ops(&s3c24xx_irq_syscore_ops);
+#endif
return device_register(&s3c2410_dev);
}
diff --git a/arch/arm/mach-s3c24xx/s3c2412-power.h b/arch/arm/mach-s3c24xx/s3c2412-power.h
new file mode 100644
index 0000000..1b02c5d
--- /dev/null
+++ b/arch/arm/mach-s3c24xx/s3c2412-power.h
@@ -0,0 +1,37 @@
+/*
+ * Copyright (c) 2003-2006 Simtec Electronics <linux@simtec.co.uk>
+ * http://armlinux.simtec.co.uk/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ARCH_ARM_MACH_S3C24XX_S3C2412_POWER_H
+#define __ARCH_ARM_MACH_S3C24XX_S3C2412_POWER_H __FILE__
+
+#define S3C24XX_PWRREG(x) ((x) + S3C24XX_VA_CLKPWR)
+
+#define S3C2412_PWRMODECON S3C24XX_PWRREG(0x20)
+#define S3C2412_PWRCFG S3C24XX_PWRREG(0x24)
+
+#define S3C2412_INFORM0 S3C24XX_PWRREG(0x70)
+#define S3C2412_INFORM1 S3C24XX_PWRREG(0x74)
+#define S3C2412_INFORM2 S3C24XX_PWRREG(0x78)
+#define S3C2412_INFORM3 S3C24XX_PWRREG(0x7C)
+
+#define S3C2412_PWRCFG_BATF_IRQ (1 << 0)
+#define S3C2412_PWRCFG_BATF_IGNORE (2 << 0)
+#define S3C2412_PWRCFG_BATF_SLEEP (3 << 0)
+#define S3C2412_PWRCFG_BATF_MASK (3 << 0)
+
+#define S3C2412_PWRCFG_STANDBYWFI_IGNORE (0 << 6)
+#define S3C2412_PWRCFG_STANDBYWFI_IDLE (1 << 6)
+#define S3C2412_PWRCFG_STANDBYWFI_STOP (2 << 6)
+#define S3C2412_PWRCFG_STANDBYWFI_SLEEP (3 << 6)
+#define S3C2412_PWRCFG_STANDBYWFI_MASK (3 << 6)
+
+#define S3C2412_PWRCFG_RTC_MASKIRQ (1 << 8)
+#define S3C2412_PWRCFG_NAND_NORST (1 << 9)
+
+#endif /* __ARCH_ARM_MACH_S3C24XX_S3C2412_POWER_H */
diff --git a/arch/arm/mach-s3c24xx/s3c2412.c b/arch/arm/mach-s3c24xx/s3c2412.c
index 6c5f403..0d59215 100644
--- a/arch/arm/mach-s3c24xx/s3c2412.c
+++ b/arch/arm/mach-s3c24xx/s3c2412.c
@@ -1,5 +1,4 @@
-/* linux/arch/arm/mach-s3c2412/s3c2412.c
- *
+/*
* Copyright (c) 2006 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
*
@@ -28,28 +27,31 @@
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
-#include <mach/hardware.h>
#include <asm/proc-fns.h>
#include <asm/irq.h>
#include <asm/system_misc.h>
-#include <plat/cpu-freq.h>
-
+#include <mach/hardware.h>
#include <mach/regs-clock.h>
-#include <plat/regs-serial.h>
-#include <mach/regs-power.h>
#include <mach/regs-gpio.h>
-#include <mach/regs-dsc.h>
-#include <plat/regs-spi.h>
-#include <mach/regs-s3c2412.h>
-#include <plat/s3c2412.h>
-#include <plat/cpu.h>
-#include <plat/devs.h>
#include <plat/clock.h>
-#include <plat/pm.h>
-#include <plat/pll.h>
+#include <plat/cpu.h>
+#include <plat/cpu-freq.h>
+#include <plat/devs.h>
#include <plat/nand-core.h>
+#include <plat/pll.h>
+#include <plat/pm.h>
+#include <plat/regs-serial.h>
+#include <plat/regs-spi.h>
+#include <plat/s3c2412.h>
+
+#include "common.h"
+#include "regs-dsc.h"
+#include "s3c2412-power.h"
+
+#define S3C2412_SWRST (S3C24XX_VA_CLKPWR + 0x30)
+#define S3C2412_SWRST_RESET (0x533C2412)
#ifndef CONFIG_CPU_S3C2412_ONLY
void __iomem *s3c24xx_va_gpio2 = S3C24XX_VA_GPIO;
@@ -244,8 +246,8 @@
#ifdef CONFIG_PM
register_syscore_ops(&s3c2412_pm_syscore_ops);
-#endif
register_syscore_ops(&s3c24xx_irq_syscore_ops);
+#endif
return device_register(&s3c2412_dev);
}
diff --git a/arch/arm/mach-s3c24xx/s3c2412.h b/arch/arm/mach-s3c24xx/s3c2412.h
new file mode 100644
index 0000000..548ced4
--- /dev/null
+++ b/arch/arm/mach-s3c24xx/s3c2412.h
@@ -0,0 +1,26 @@
+/*
+ * Copyright (c) 2008 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ * http://armlinux.simtec.co.uk/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ARCH_ARM_MACH_S3C24XX_S3C2412_H
+#define __ARCH_ARM_REGS_S3C24XX_S3C2412_H __FILE__
+
+#define S3C2412_MEMREG(x) (S3C24XX_VA_MEMCTRL + (x))
+#define S3C2412_EBIREG(x) (S3C2412_VA_EBI + (x))
+
+#define S3C2412_SSMCREG(x) (S3C2412_VA_SSMC + (x))
+#define S3C2412_SSMC(x, o) (S3C2412_SSMCREG((x * 0x20) + (o)))
+
+#define S3C2412_REFRESH S3C2412_MEMREG(0x10)
+
+#define S3C2412_EBI_BANKCFG S3C2412_EBIREG(0x4)
+
+#define S3C2412_SSMC_BANK(x) S3C2412_SSMC(x, 0x0)
+
+#endif /* __ARCH_ARM_MACH_S3C24XX_S3C2412_H */
diff --git a/arch/arm/mach-s3c24xx/s3c2416.c b/arch/arm/mach-s3c24xx/s3c2416.c
index 77ee0b7..e30476d 100644
--- a/arch/arm/mach-s3c24xx/s3c2416.c
+++ b/arch/arm/mach-s3c24xx/s3c2416.c
@@ -63,6 +63,8 @@
#include <plat/rtc-core.h>
#include <plat/spi-core.h>
+#include "common.h"
+
static struct map_desc s3c2416_iodesc[] __initdata = {
IODESC_ENT(WATCHDOG),
IODESC_ENT(CLKPWR),
@@ -105,9 +107,9 @@
#ifdef CONFIG_PM
register_syscore_ops(&s3c2416_pm_syscore_ops);
-#endif
register_syscore_ops(&s3c24xx_irq_syscore_ops);
register_syscore_ops(&s3c2416_irq_syscore_ops);
+#endif
return device_register(&s3c2416_dev);
}
diff --git a/arch/arm/mach-s3c24xx/s3c2440.c b/arch/arm/mach-s3c24xx/s3c2440.c
index 2b3dddb..559e394 100644
--- a/arch/arm/mach-s3c24xx/s3c2440.c
+++ b/arch/arm/mach-s3c24xx/s3c2440.c
@@ -40,6 +40,8 @@
#include <plat/gpio-cfg.h>
#include <plat/gpio-cfg-helpers.h>
+#include "common.h"
+
static struct device s3c2440_dev = {
.bus = &s3c2440_subsys,
};
@@ -57,9 +59,9 @@
#ifdef CONFIG_PM
register_syscore_ops(&s3c2410_pm_syscore_ops);
+ register_syscore_ops(&s3c24xx_irq_syscore_ops);
#endif
register_syscore_ops(&s3c244x_pm_syscore_ops);
- register_syscore_ops(&s3c24xx_irq_syscore_ops);
/* register our system device for everything else */
diff --git a/arch/arm/mach-s3c24xx/s3c2442.c b/arch/arm/mach-s3c24xx/s3c2442.c
index 22cb7c9..f732826 100644
--- a/arch/arm/mach-s3c24xx/s3c2442.c
+++ b/arch/arm/mach-s3c24xx/s3c2442.c
@@ -51,6 +51,8 @@
#include <plat/gpio-cfg.h>
#include <plat/gpio-cfg-helpers.h>
+#include "common.h"
+
/* S3C2442 extended clock support */
static unsigned long s3c2442_camif_upll_round(struct clk *clk,
@@ -172,9 +174,9 @@
#ifdef CONFIG_PM
register_syscore_ops(&s3c2410_pm_syscore_ops);
+ register_syscore_ops(&s3c24xx_irq_syscore_ops);
#endif
register_syscore_ops(&s3c244x_pm_syscore_ops);
- register_syscore_ops(&s3c24xx_irq_syscore_ops);
return device_register(&s3c2442_dev);
}
diff --git a/arch/arm/mach-s3c24xx/s3c244x.c b/arch/arm/mach-s3c24xx/s3c244x.c
index b0b60a1..ad2671b 100644
--- a/arch/arm/mach-s3c24xx/s3c244x.c
+++ b/arch/arm/mach-s3c24xx/s3c244x.c
@@ -36,7 +36,6 @@
#include <mach/regs-clock.h>
#include <plat/regs-serial.h>
#include <mach/regs-gpio.h>
-#include <mach/regs-dsc.h>
#include <plat/s3c2410.h>
#include <plat/s3c244x.h>
@@ -48,6 +47,8 @@
#include <plat/nand-core.h>
#include <plat/watchdog-reset.h>
+#include "regs-dsc.h"
+
static struct map_desc s3c244x_iodesc[] __initdata = {
IODESC_ENT(CLKPWR),
IODESC_ENT(TIMER),
diff --git a/arch/arm/mach-s3c24xx/simtec-audio.c b/arch/arm/mach-s3c24xx/simtec-audio.c
index fd0ef05..67cb512 100644
--- a/arch/arm/mach-s3c24xx/simtec-audio.c
+++ b/arch/arm/mach-s3c24xx/simtec-audio.c
@@ -17,16 +17,13 @@
#include <linux/device.h>
#include <linux/io.h>
-#include <mach/bast-map.h>
-#include <mach/bast-irq.h>
-#include <mach/bast-cpld.h>
-
#include <mach/hardware.h>
#include <mach/regs-gpio.h>
#include <linux/platform_data/asoc-s3c24xx_simtec.h>
#include <plat/devs.h>
+#include "bast.h"
#include "simtec.h"
/* platform ops for audio */
diff --git a/arch/arm/mach-s3c24xx/simtec-nor.c b/arch/arm/mach-s3c24xx/simtec-nor.c
index 029744fc..8884bff 100644
--- a/arch/arm/mach-s3c24xx/simtec-nor.c
+++ b/arch/arm/mach-s3c24xx/simtec-nor.c
@@ -27,9 +27,8 @@
#include <asm/mach/irq.h>
#include <mach/map.h>
-#include <mach/bast-map.h>
-#include <mach/bast-cpld.h>
+#include "bast.h"
#include "simtec.h"
static void simtec_nor_vpp(struct platform_device *pdev, int vpp)
diff --git a/arch/arm/mach-s3c24xx/simtec-pm.c b/arch/arm/mach-s3c24xx/simtec-pm.c
index 699f931..38a2f1f 100644
--- a/arch/arm/mach-s3c24xx/simtec-pm.c
+++ b/arch/arm/mach-s3c24xx/simtec-pm.c
@@ -28,12 +28,13 @@
#include <mach/map.h>
#include <mach/regs-gpio.h>
-#include <mach/regs-mem.h>
#include <asm/mach-types.h>
#include <plat/pm.h>
+#include "regs-mem.h"
+
#define COPYRIGHT ", Copyright 2005 Simtec Electronics"
/* pm_simtec_init
diff --git a/arch/arm/mach-s3c24xx/simtec-usb.c b/arch/arm/mach-s3c24xx/simtec-usb.c
index ddf7a3c..2ed2e32 100644
--- a/arch/arm/mach-s3c24xx/simtec-usb.c
+++ b/arch/arm/mach-s3c24xx/simtec-usb.c
@@ -28,15 +28,13 @@
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
-#include <mach/bast-map.h>
-#include <mach/bast-irq.h>
-
#include <mach/hardware.h>
#include <asm/irq.h>
#include <linux/platform_data/usb-ohci-s3c2410.h>
#include <plat/devs.h>
+#include "bast.h"
#include "simtec.h"
/* control power and monitor over-current events on various Simtec
@@ -79,7 +77,7 @@
int ret;
if (on) {
- ret = request_irq(IRQ_USBOC, usb_simtec_ocirq,
+ ret = request_irq(BAST_IRQ_USBOC, usb_simtec_ocirq,
IRQF_DISABLED | IRQF_TRIGGER_RISING |
IRQF_TRIGGER_FALLING,
"USB Over-current", info);
@@ -87,7 +85,7 @@
printk(KERN_ERR "failed to request usb oc irq\n");
}
} else {
- free_irq(IRQ_USBOC, info);
+ free_irq(BAST_IRQ_USBOC, info);
}
}
diff --git a/arch/arm/mach-s3c24xx/sleep-s3c2410.S b/arch/arm/mach-s3c24xx/sleep-s3c2410.S
index 65200ae..dd47c8f 100644
--- a/arch/arm/mach-s3c24xx/sleep-s3c2410.S
+++ b/arch/arm/mach-s3c24xx/sleep-s3c2410.S
@@ -31,9 +31,10 @@
#include <mach/regs-gpio.h>
#include <mach/regs-clock.h>
-#include <mach/regs-mem.h>
#include <plat/regs-serial.h>
+#include "regs-mem.h"
+
/* s3c2410_cpu_suspend
*
* put the cpu into sleep mode
diff --git a/arch/arm/mach-s3c24xx/sleep.S b/arch/arm/mach-s3c24xx/sleep.S
index c5661256..7f378b6 100644
--- a/arch/arm/mach-s3c24xx/sleep.S
+++ b/arch/arm/mach-s3c24xx/sleep.S
@@ -31,7 +31,6 @@
#include <mach/regs-gpio.h>
#include <mach/regs-clock.h>
-#include <mach/regs-mem.h>
#include <plat/regs-serial.h>
/* CONFIG_DEBUG_RESUME is dangerous if your bootloader does not
diff --git a/arch/arm/mach-s3c24xx/vr1000.h b/arch/arm/mach-s3c24xx/vr1000.h
new file mode 100644
index 0000000..7fcd2c2f
--- /dev/null
+++ b/arch/arm/mach-s3c24xx/vr1000.h
@@ -0,0 +1,118 @@
+
+/* arch/arm/mach-s3c2410/include/mach/vr1000-cpld.h
+ *
+ * Copyright (c) 2003 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * VR1000 - CPLD control constants
+ * Machine VR1000 - IRQ Number definitions
+ * Machine VR1000 - Memory map definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __MACH_S3C24XX_VR1000_H
+#define __MACH_S3C24XX_VR1000_H __FILE__
+
+#define VR1000_CPLD_CTRL2_RAMWEN (0x04) /* SRAM Write Enable */
+
+/* irq numbers to onboard peripherals */
+
+#define VR1000_IRQ_USBOC IRQ_EINT19
+#define VR1000_IRQ_IDE0 IRQ_EINT16
+#define VR1000_IRQ_IDE1 IRQ_EINT17
+#define VR1000_IRQ_SERIAL IRQ_EINT12
+#define VR1000_IRQ_DM9000A IRQ_EINT10
+#define VR1000_IRQ_DM9000N IRQ_EINT9
+#define VR1000_IRQ_SMALERT IRQ_EINT8
+
+/* map */
+
+#define VR1000_IOADDR(x) (S3C2410_ADDR((x) + 0x01300000))
+
+/* we put the CPLD registers next, to get them out of the way */
+
+#define VR1000_VA_CTRL1 VR1000_IOADDR(0x00000000) /* 0x01300000 */
+#define VR1000_PA_CTRL1 (S3C2410_CS5 | 0x7800000)
+
+#define VR1000_VA_CTRL2 VR1000_IOADDR(0x00100000) /* 0x01400000 */
+#define VR1000_PA_CTRL2 (S3C2410_CS1 | 0x6000000)
+
+#define VR1000_VA_CTRL3 VR1000_IOADDR(0x00200000) /* 0x01500000 */
+#define VR1000_PA_CTRL3 (S3C2410_CS1 | 0x6800000)
+
+#define VR1000_VA_CTRL4 VR1000_IOADDR(0x00300000) /* 0x01600000 */
+#define VR1000_PA_CTRL4 (S3C2410_CS1 | 0x7000000)
+
+/* next, we have the PC104 ISA interrupt registers */
+
+#define VR1000_PA_PC104_IRQREQ (S3C2410_CS5 | 0x6000000) /* 0x01700000 */
+#define VR1000_VA_PC104_IRQREQ VR1000_IOADDR(0x00400000)
+
+#define VR1000_PA_PC104_IRQRAW (S3C2410_CS5 | 0x6800000) /* 0x01800000 */
+#define VR1000_VA_PC104_IRQRAW VR1000_IOADDR(0x00500000)
+
+#define VR1000_PA_PC104_IRQMASK (S3C2410_CS5 | 0x7000000) /* 0x01900000 */
+#define VR1000_VA_PC104_IRQMASK VR1000_IOADDR(0x00600000)
+
+/*
+ * 0xE0000000 contains the IO space that is split by speed and
+ * whether the access is for 8 or 16bit IO... this ensures that
+ * the correct access is made
+ *
+ * 0x10000000 of space, partitioned as so:
+ *
+ * 0x00000000 to 0x04000000 8bit, slow
+ * 0x04000000 to 0x08000000 16bit, slow
+ * 0x08000000 to 0x0C000000 16bit, net
+ * 0x0C000000 to 0x10000000 16bit, fast
+ *
+ * each of these spaces has the following in:
+ *
+ * 0x02000000 to 0x02100000 1MB IDE primary channel
+ * 0x02100000 to 0x02200000 1MB IDE primary channel aux
+ * 0x02200000 to 0x02400000 1MB IDE secondary channel
+ * 0x02300000 to 0x02400000 1MB IDE secondary channel aux
+ * 0x02500000 to 0x02600000 1MB Davicom DM9000 ethernet controllers
+ * 0x02600000 to 0x02700000 1MB
+ *
+ * the phyiscal layout of the zones are:
+ * nGCS2 - 8bit, slow
+ * nGCS3 - 16bit, slow
+ * nGCS4 - 16bit, net
+ * nGCS5 - 16bit, fast
+ */
+
+#define VR1000_VA_MULTISPACE (0xE0000000)
+
+#define VR1000_VA_ISAIO (VR1000_VA_MULTISPACE + 0x00000000)
+#define VR1000_VA_ISAMEM (VR1000_VA_MULTISPACE + 0x01000000)
+#define VR1000_VA_IDEPRI (VR1000_VA_MULTISPACE + 0x02000000)
+#define VR1000_VA_IDEPRIAUX (VR1000_VA_MULTISPACE + 0x02100000)
+#define VR1000_VA_IDESEC (VR1000_VA_MULTISPACE + 0x02200000)
+#define VR1000_VA_IDESECAUX (VR1000_VA_MULTISPACE + 0x02300000)
+#define VR1000_VA_ASIXNET (VR1000_VA_MULTISPACE + 0x02400000)
+#define VR1000_VA_DM9000 (VR1000_VA_MULTISPACE + 0x02500000)
+#define VR1000_VA_SUPERIO (VR1000_VA_MULTISPACE + 0x02600000)
+
+/* physical offset addresses for the peripherals */
+
+#define VR1000_PA_IDEPRI (0x02000000)
+#define VR1000_PA_IDEPRIAUX (0x02800000)
+#define VR1000_PA_IDESEC (0x03000000)
+#define VR1000_PA_IDESECAUX (0x03800000)
+#define VR1000_PA_DM9000 (0x05000000)
+
+#define VR1000_PA_SERIAL (0x11800000)
+#define VR1000_VA_SERIAL (VR1000_IOADDR(0x00700000))
+
+/* VR1000 ram is in CS1, with A26..A24 = 2_101 */
+#define VR1000_PA_SRAM (S3C2410_CS1 | 0x05000000)
+
+/* some configurations for the peripherals */
+
+#define VR1000_DM9000_CS VR1000_VAM_CS4
+
+#endif /* __MACH_S3C24XX_VR1000_H */
diff --git a/arch/arm/mach-s3c64xx/clock.c b/arch/arm/mach-s3c64xx/clock.c
index 803711e..8499415 100644
--- a/arch/arm/mach-s3c64xx/clock.c
+++ b/arch/arm/mach-s3c64xx/clock.c
@@ -23,7 +23,6 @@
#include <mach/hardware.h>
#include <mach/map.h>
-#include <mach/regs-sys.h>
#include <mach/regs-clock.h>
#include <plat/cpu.h>
@@ -33,6 +32,8 @@
#include <plat/clock-clksrc.h>
#include <plat/pll.h>
+#include "regs-sys.h"
+
/* fin_apll, fin_mpll and fin_epll are all the same clock, which we call
* ext_xtal_mux for want of an actual name from the manual.
*/
diff --git a/arch/arm/mach-s3c64xx/common.c b/arch/arm/mach-s3c64xx/common.c
index aef303b..0b9c0ba 100644
--- a/arch/arm/mach-s3c64xx/common.c
+++ b/arch/arm/mach-s3c64xx/common.c
@@ -25,10 +25,10 @@
#include <linux/dma-mapping.h>
#include <linux/irq.h>
#include <linux/gpio.h>
+#include <linux/irqchip/arm-vic.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
-#include <asm/hardware/vic.h>
#include <asm/system_misc.h>
#include <mach/map.h>
diff --git a/arch/arm/mach-s3c64xx/cpuidle.c b/arch/arm/mach-s3c64xx/cpuidle.c
index acb197c..ead5fab 100644
--- a/arch/arm/mach-s3c64xx/cpuidle.c
+++ b/arch/arm/mach-s3c64xx/cpuidle.c
@@ -20,8 +20,8 @@
#include <mach/map.h>
-#include <mach/regs-sys.h>
-#include <mach/regs-syscon-power.h>
+#include "regs-sys.h"
+#include "regs-syscon-power.h"
static int s3c64xx_enter_idle(struct cpuidle_device *dev,
struct cpuidle_driver *drv,
diff --git a/arch/arm/mach-s3c64xx/include/mach/crag6410.h b/arch/arm/mach-s3c64xx/crag6410.h
similarity index 100%
rename from arch/arm/mach-s3c64xx/include/mach/crag6410.h
rename to arch/arm/mach-s3c64xx/crag6410.h
diff --git a/arch/arm/mach-s3c64xx/dma.c b/arch/arm/mach-s3c64xx/dma.c
index f2a7a17..ec29b35 100644
--- a/arch/arm/mach-s3c64xx/dma.c
+++ b/arch/arm/mach-s3c64xx/dma.c
@@ -28,10 +28,10 @@
#include <mach/map.h>
#include <mach/irqs.h>
-#include <mach/regs-sys.h>
-
#include <asm/hardware/pl080.h>
+#include "regs-sys.h"
+
/* dma channel state information */
struct s3c64xx_dmac {
diff --git a/arch/arm/mach-s3c64xx/include/mach/regs-irq.h b/arch/arm/mach-s3c64xx/include/mach/regs-irq.h
index bcce68a..6a112789 100644
--- a/arch/arm/mach-s3c64xx/include/mach/regs-irq.h
+++ b/arch/arm/mach-s3c64xx/include/mach/regs-irq.h
@@ -15,6 +15,5 @@
#ifndef __ASM_ARCH_REGS_IRQ_H
#define __ASM_ARCH_REGS_IRQ_H __FILE__
-#include <asm/hardware/vic.h>
#endif /* __ASM_ARCH_6400_REGS_IRQ_H */
diff --git a/arch/arm/mach-s3c64xx/include/mach/regs-sys.h b/arch/arm/mach-s3c64xx/include/mach/regs-sys.h
deleted file mode 100644
index b91e020..0000000
--- a/arch/arm/mach-s3c64xx/include/mach/regs-sys.h
+++ /dev/null
@@ -1,31 +0,0 @@
-/* arch/arm/plat-s3c64xx/include/plat/regs-sys.h
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- * http://armlinux.simtec.co.uk/
- *
- * S3C64XX system register definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __PLAT_REGS_SYS_H
-#define __PLAT_REGS_SYS_H __FILE__
-
-#define S3C_SYSREG(x) (S3C_VA_SYS + (x))
-
-#define S3C64XX_AHB_CON0 S3C_SYSREG(0x100)
-#define S3C64XX_AHB_CON1 S3C_SYSREG(0x104)
-#define S3C64XX_AHB_CON2 S3C_SYSREG(0x108)
-
-#define S3C64XX_SDMA_SEL S3C_SYSREG(0x110)
-
-#define S3C64XX_OTHERS S3C_SYSREG(0x900)
-
-#define S3C64XX_OTHERS_USBMASK (1 << 16)
-#define S3C64XX_OTHERS_SYNCMUXSEL (1 << 6)
-
-#endif /* _PLAT_REGS_SYS_H */
diff --git a/arch/arm/mach-s3c64xx/include/mach/tick.h b/arch/arm/mach-s3c64xx/include/mach/tick.h
index ebe18a9..db9c1b1 100644
--- a/arch/arm/mach-s3c64xx/include/mach/tick.h
+++ b/arch/arm/mach-s3c64xx/include/mach/tick.h
@@ -15,6 +15,8 @@
#ifndef __ASM_ARCH_TICK_H
#define __ASM_ARCH_TICK_H __FILE__
+#include <linux/irqchip/arm-vic.h>
+
/* note, the timer interrutps turn up in 2 places, the vic and then
* the timer block. We take the VIC as the base at the moment.
*/
diff --git a/arch/arm/mach-s3c64xx/mach-anw6410.c b/arch/arm/mach-s3c64xx/mach-anw6410.c
index 99e82ac..728eef3 100644
--- a/arch/arm/mach-s3c64xx/mach-anw6410.c
+++ b/arch/arm/mach-s3c64xx/mach-anw6410.c
@@ -31,7 +31,6 @@
#include <video/platform_lcd.h>
#include <video/samsung_fimd.h>
-#include <asm/hardware/vic.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
@@ -50,9 +49,9 @@
#include <plat/devs.h>
#include <plat/cpu.h>
#include <mach/regs-gpio.h>
-#include <mach/regs-modem.h>
#include "common.h"
+#include "regs-modem.h"
/* DM9000 */
#define ANW6410_PA_DM9000 (0x18000000)
@@ -230,10 +229,9 @@
.atag_offset = 0x100,
.init_irq = s3c6410_init_irq,
- .handle_irq = vic_handle_irq,
.map_io = anw6410_map_io,
.init_machine = anw6410_machine_init,
.init_late = s3c64xx_init_late,
- .timer = &s3c24xx_timer,
+ .init_time = s3c24xx_timer_init,
.restart = s3c64xx_restart,
MACHINE_END
diff --git a/arch/arm/mach-s3c64xx/mach-crag6410-module.c b/arch/arm/mach-s3c64xx/mach-crag6410-module.c
index 755c0bb..bf3d1c0 100644
--- a/arch/arm/mach-s3c64xx/mach-crag6410-module.c
+++ b/arch/arm/mach-s3c64xx/mach-crag6410-module.c
@@ -29,7 +29,7 @@
#include <linux/platform_data/spi-s3c64xx.h>
-#include <mach/crag6410.h>
+#include "crag6410.h"
static struct s3c64xx_spi_csinfo wm0010_spi_csinfo = {
.line = S3C64XX_GPC(3),
diff --git a/arch/arm/mach-s3c64xx/mach-crag6410.c b/arch/arm/mach-s3c64xx/mach-crag6410.c
index bf6311a..1acf02b 100644
--- a/arch/arm/mach-s3c64xx/mach-crag6410.c
+++ b/arch/arm/mach-s3c64xx/mach-crag6410.c
@@ -42,7 +42,6 @@
#include <sound/wm1250-ev1.h>
-#include <asm/hardware/vic.h>
#include <asm/mach/arch.h>
#include <asm/mach-types.h>
@@ -50,12 +49,7 @@
#include <mach/hardware.h>
#include <mach/map.h>
-#include <mach/regs-sys.h>
#include <mach/regs-gpio.h>
-#include <mach/regs-modem.h>
-#include <mach/crag6410.h>
-
-#include <mach/regs-gpio-memport.h>
#include <plat/regs-serial.h>
#include <plat/fb.h>
@@ -72,6 +66,10 @@
#include <plat/pm.h>
#include "common.h"
+#include "crag6410.h"
+#include "regs-gpio-memport.h"
+#include "regs-modem.h"
+#include "regs-sys.h"
/* serial port setup */
@@ -867,10 +865,9 @@
/* Maintainer: Mark Brown <broonie@opensource.wolfsonmicro.com> */
.atag_offset = 0x100,
.init_irq = s3c6410_init_irq,
- .handle_irq = vic_handle_irq,
.map_io = crag6410_map_io,
.init_machine = crag6410_machine_init,
.init_late = s3c64xx_init_late,
- .timer = &s3c24xx_timer,
+ .init_time = s3c24xx_timer_init,
.restart = s3c64xx_restart,
MACHINE_END
diff --git a/arch/arm/mach-s3c64xx/mach-hmt.c b/arch/arm/mach-s3c64xx/mach-hmt.c
index 2b14489..7212eb9 100644
--- a/arch/arm/mach-s3c64xx/mach-hmt.c
+++ b/arch/arm/mach-s3c64xx/mach-hmt.c
@@ -30,7 +30,6 @@
#include <mach/hardware.h>
#include <mach/map.h>
-#include <asm/hardware/vic.h>
#include <asm/irq.h>
#include <asm/mach-types.h>
@@ -273,10 +272,9 @@
/* Maintainer: Peter Korsgaard <jacmet@sunsite.dk> */
.atag_offset = 0x100,
.init_irq = s3c6410_init_irq,
- .handle_irq = vic_handle_irq,
.map_io = hmt_map_io,
.init_machine = hmt_machine_init,
.init_late = s3c64xx_init_late,
- .timer = &s3c24xx_timer,
+ .init_time = s3c24xx_timer_init,
.restart = s3c64xx_restart,
MACHINE_END
diff --git a/arch/arm/mach-s3c64xx/mach-mini6410.c b/arch/arm/mach-s3c64xx/mach-mini6410.c
index 07c349c..4b41fcd 100644
--- a/arch/arm/mach-s3c64xx/mach-mini6410.c
+++ b/arch/arm/mach-s3c64xx/mach-mini6410.c
@@ -24,15 +24,12 @@
#include <linux/serial_core.h>
#include <linux/types.h>
-#include <asm/hardware/vic.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <mach/map.h>
#include <mach/regs-gpio.h>
-#include <mach/regs-modem.h>
-#include <mach/regs-srom.h>
#include <plat/adc.h>
#include <plat/cpu.h>
@@ -46,6 +43,8 @@
#include <video/samsung_fimd.h>
#include "common.h"
+#include "regs-modem.h"
+#include "regs-srom.h"
#define UCON S3C2410_UCON_DEFAULT
#define ULCON (S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB)
@@ -352,10 +351,9 @@
/* Maintainer: Darius Augulis <augulis.darius@gmail.com> */
.atag_offset = 0x100,
.init_irq = s3c6410_init_irq,
- .handle_irq = vic_handle_irq,
.map_io = mini6410_map_io,
.init_machine = mini6410_machine_init,
.init_late = s3c64xx_init_late,
- .timer = &s3c24xx_timer,
+ .init_time = s3c24xx_timer_init,
.restart = s3c64xx_restart,
MACHINE_END
diff --git a/arch/arm/mach-s3c64xx/mach-ncp.c b/arch/arm/mach-s3c64xx/mach-ncp.c
index e5f9a79..8d3cedd 100644
--- a/arch/arm/mach-s3c64xx/mach-ncp.c
+++ b/arch/arm/mach-s3c64xx/mach-ncp.c
@@ -26,7 +26,6 @@
#include <video/platform_lcd.h>
#include <video/samsung_fimd.h>
-#include <asm/hardware/vic.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
@@ -101,10 +100,9 @@
/* Maintainer: Samsung Electronics */
.atag_offset = 0x100,
.init_irq = s3c6410_init_irq,
- .handle_irq = vic_handle_irq,
.map_io = ncp_map_io,
.init_machine = ncp_machine_init,
.init_late = s3c64xx_init_late,
- .timer = &s3c24xx_timer,
+ .init_time = s3c24xx_timer_init,
.restart = s3c64xx_restart,
MACHINE_END
diff --git a/arch/arm/mach-s3c64xx/mach-real6410.c b/arch/arm/mach-s3c64xx/mach-real6410.c
index 7476f7c..fa12bd2 100644
--- a/arch/arm/mach-s3c64xx/mach-real6410.c
+++ b/arch/arm/mach-s3c64xx/mach-real6410.c
@@ -25,15 +25,12 @@
#include <linux/serial_core.h>
#include <linux/types.h>
-#include <asm/hardware/vic.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <mach/map.h>
#include <mach/regs-gpio.h>
-#include <mach/regs-modem.h>
-#include <mach/regs-srom.h>
#include <plat/adc.h>
#include <plat/cpu.h>
@@ -47,6 +44,8 @@
#include <video/samsung_fimd.h>
#include "common.h"
+#include "regs-modem.h"
+#include "regs-srom.h"
#define UCON S3C2410_UCON_DEFAULT
#define ULCON (S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB)
@@ -331,10 +330,9 @@
.atag_offset = 0x100,
.init_irq = s3c6410_init_irq,
- .handle_irq = vic_handle_irq,
.map_io = real6410_map_io,
.init_machine = real6410_machine_init,
.init_late = s3c64xx_init_late,
- .timer = &s3c24xx_timer,
+ .init_time = s3c24xx_timer_init,
.restart = s3c64xx_restart,
MACHINE_END
diff --git a/arch/arm/mach-s3c64xx/mach-smartq.c b/arch/arm/mach-s3c64xx/mach-smartq.c
index c6d7390..fc3e9b3 100644
--- a/arch/arm/mach-s3c64xx/mach-smartq.c
+++ b/arch/arm/mach-s3c64xx/mach-smartq.c
@@ -25,7 +25,6 @@
#include <mach/map.h>
#include <mach/regs-gpio.h>
-#include <mach/regs-modem.h>
#include <plat/clock.h>
#include <plat/cpu.h>
@@ -41,6 +40,7 @@
#include <video/platform_lcd.h>
#include "common.h"
+#include "regs-modem.h"
#define UCON S3C2410_UCON_DEFAULT
#define ULCON (S3C2410_LCON_CS8 | S3C2410_LCON_PNONE)
diff --git a/arch/arm/mach-s3c64xx/mach-smartq5.c b/arch/arm/mach-s3c64xx/mach-smartq5.c
index 96d6da2..ca2afcf 100644
--- a/arch/arm/mach-s3c64xx/mach-smartq5.c
+++ b/arch/arm/mach-s3c64xx/mach-smartq5.c
@@ -17,7 +17,6 @@
#include <linux/leds.h>
#include <linux/platform_device.h>
-#include <asm/hardware/vic.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
@@ -153,10 +152,9 @@
/* Maintainer: Maurus Cuelenaere <mcuelenaere AT gmail DOT com> */
.atag_offset = 0x100,
.init_irq = s3c6410_init_irq,
- .handle_irq = vic_handle_irq,
.map_io = smartq_map_io,
.init_machine = smartq5_machine_init,
.init_late = s3c64xx_init_late,
- .timer = &s3c24xx_timer,
+ .init_time = s3c24xx_timer_init,
.restart = s3c64xx_restart,
MACHINE_END
diff --git a/arch/arm/mach-s3c64xx/mach-smartq7.c b/arch/arm/mach-s3c64xx/mach-smartq7.c
index 7d1167b..37bb0c6 100644
--- a/arch/arm/mach-s3c64xx/mach-smartq7.c
+++ b/arch/arm/mach-s3c64xx/mach-smartq7.c
@@ -17,7 +17,6 @@
#include <linux/leds.h>
#include <linux/platform_device.h>
-#include <asm/hardware/vic.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
@@ -169,10 +168,9 @@
/* Maintainer: Maurus Cuelenaere <mcuelenaere AT gmail DOT com> */
.atag_offset = 0x100,
.init_irq = s3c6410_init_irq,
- .handle_irq = vic_handle_irq,
.map_io = smartq_map_io,
.init_machine = smartq7_machine_init,
.init_late = s3c64xx_init_late,
- .timer = &s3c24xx_timer,
+ .init_time = s3c24xx_timer_init,
.restart = s3c64xx_restart,
MACHINE_END
diff --git a/arch/arm/mach-s3c64xx/mach-smdk6400.c b/arch/arm/mach-s3c64xx/mach-smdk6400.c
index a928fae..a392869 100644
--- a/arch/arm/mach-s3c64xx/mach-smdk6400.c
+++ b/arch/arm/mach-s3c64xx/mach-smdk6400.c
@@ -22,7 +22,6 @@
#include <asm/mach-types.h>
-#include <asm/hardware/vic.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
@@ -90,10 +89,9 @@
.atag_offset = 0x100,
.init_irq = s3c6400_init_irq,
- .handle_irq = vic_handle_irq,
.map_io = smdk6400_map_io,
.init_machine = smdk6400_machine_init,
.init_late = s3c64xx_init_late,
- .timer = &s3c24xx_timer,
+ .init_time = s3c24xx_timer_init,
.restart = s3c64xx_restart,
MACHINE_END
diff --git a/arch/arm/mach-s3c64xx/mach-smdk6410.c b/arch/arm/mach-s3c64xx/mach-smdk6410.c
index 574a9ee..ba7544e 100644
--- a/arch/arm/mach-s3c64xx/mach-smdk6410.c
+++ b/arch/arm/mach-s3c64xx/mach-smdk6410.c
@@ -45,7 +45,6 @@
#include <video/platform_lcd.h>
#include <video/samsung_fimd.h>
-#include <asm/hardware/vic.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
@@ -57,10 +56,7 @@
#include <asm/mach-types.h>
#include <plat/regs-serial.h>
-#include <mach/regs-modem.h>
#include <mach/regs-gpio.h>
-#include <mach/regs-sys.h>
-#include <mach/regs-srom.h>
#include <linux/platform_data/ata-samsung_cf.h>
#include <linux/platform_data/i2c-s3c2410.h>
#include <plat/fb.h>
@@ -75,6 +71,9 @@
#include <plat/backlight.h>
#include "common.h"
+#include "regs-modem.h"
+#include "regs-srom.h"
+#include "regs-sys.h"
#define UCON S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK
#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB
@@ -700,10 +699,9 @@
.atag_offset = 0x100,
.init_irq = s3c6410_init_irq,
- .handle_irq = vic_handle_irq,
.map_io = smdk6410_map_io,
.init_machine = smdk6410_machine_init,
.init_late = s3c64xx_init_late,
- .timer = &s3c24xx_timer,
+ .init_time = s3c24xx_timer_init,
.restart = s3c64xx_restart,
MACHINE_END
diff --git a/arch/arm/mach-s3c64xx/pm.c b/arch/arm/mach-s3c64xx/pm.c
index ce84990..6a1f91f 100644
--- a/arch/arm/mach-s3c64xx/pm.c
+++ b/arch/arm/mach-s3c64xx/pm.c
@@ -26,12 +26,13 @@
#include <plat/pm.h>
#include <plat/wakeup-mask.h>
-#include <mach/regs-sys.h>
#include <mach/regs-gpio.h>
#include <mach/regs-clock.h>
-#include <mach/regs-syscon-power.h>
-#include <mach/regs-gpio-memport.h>
-#include <mach/regs-modem.h>
+
+#include "regs-gpio-memport.h"
+#include "regs-modem.h"
+#include "regs-sys.h"
+#include "regs-syscon-power.h"
struct s3c64xx_pm_domain {
char *const name;
diff --git a/arch/arm/mach-s3c64xx/include/mach/regs-gpio-memport.h b/arch/arm/mach-s3c64xx/regs-gpio-memport.h
similarity index 71%
rename from arch/arm/mach-s3c64xx/include/mach/regs-gpio-memport.h
rename to arch/arm/mach-s3c64xx/regs-gpio-memport.h
index 82342f6..b927593 100644
--- a/arch/arm/mach-s3c64xx/include/mach/regs-gpio-memport.h
+++ b/arch/arm/mach-s3c64xx/regs-gpio-memport.h
@@ -1,5 +1,4 @@
-/* linux/arch/arm/plat-s3c64xx/include/mach/regs-gpio-memport.h
- *
+/*
* Copyright 2008 Openmoko, Inc.
* Copyright 2008 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
@@ -8,8 +7,8 @@
* S3C64XX - GPIO memory port register definitions
*/
-#ifndef __ASM_PLAT_S3C64XX_REGS_GPIO_MEMPORT_H
-#define __ASM_PLAT_S3C64XX_REGS_GPIO_MEMPORT_H __FILE__
+#ifndef __MACH_S3C64XX_REGS_GPIO_MEMPORT_H
+#define __MACH_S3C64XX_REGS_GPIO_MEMPORT_H __FILE__
#define S3C64XX_MEM0CONSTOP S3C64XX_GPIOREG(0x1B0)
#define S3C64XX_MEM1CONSTOP S3C64XX_GPIOREG(0x1B4)
@@ -21,5 +20,5 @@
#define S3C64XX_MEM0DRVCON S3C64XX_GPIOREG(0x1D0)
#define S3C64XX_MEM1DRVCON S3C64XX_GPIOREG(0x1D4)
-#endif /* __ASM_PLAT_S3C64XX_REGS_GPIO_MEMPORT_H */
+#endif /* __MACH_S3C64XX_REGS_GPIO_MEMPORT_H */
diff --git a/arch/arm/mach-s3c64xx/include/mach/regs-modem.h b/arch/arm/mach-s3c64xx/regs-modem.h
similarity index 78%
rename from arch/arm/mach-s3c64xx/include/mach/regs-modem.h
rename to arch/arm/mach-s3c64xx/regs-modem.h
index 49f7759..073cdd3 100644
--- a/arch/arm/mach-s3c64xx/include/mach/regs-modem.h
+++ b/arch/arm/mach-s3c64xx/regs-modem.h
@@ -1,5 +1,4 @@
-/* arch/arm/plat-s3c64xx/include/plat/regs-modem.h
- *
+/*
* Copyright 2008 Openmoko, Inc.
* Copyright 2008 Simtec Electronics
* http://armlinux.simtec.co.uk/
@@ -12,10 +11,10 @@
* published by the Free Software Foundation.
*/
-#ifndef __PLAT_S3C64XX_REGS_MODEM_H
-#define __PLAT_S3C64XX_REGS_MODEM_H __FILE__
+#ifndef __MACH_S3C64XX_REGS_MODEM_H
+#define __MACH_S3C64XX_REGS_MODEM_H __FILE__
-#define S3C64XX_MODEMREG(x) (S3C64XX_VA_MODEM + (x))
+#define S3C64XX_MODEMREG(x) (S3C64XX_VA_MODEM + (x))
#define S3C64XX_MODEM_INT2AP S3C64XX_MODEMREG(0x0)
#define S3C64XX_MODEM_INT2MODEM S3C64XX_MODEMREG(0x4)
@@ -28,4 +27,4 @@
#define MIFPCON_INT2M_LEVEL (1 << 4)
#define MIFPCON_LCD_BYPASS (1 << 3)
-#endif /* __PLAT_S3C64XX_REGS_MODEM_H */
+#endif /* __MACH_S3C64XX_REGS_MODEM_H */
diff --git a/arch/arm/mach-s3c64xx/include/mach/regs-srom.h b/arch/arm/mach-s3c64xx/regs-srom.h
similarity index 89%
rename from arch/arm/mach-s3c64xx/include/mach/regs-srom.h
rename to arch/arm/mach-s3c64xx/regs-srom.h
index 756731b..d56f338 100644
--- a/arch/arm/mach-s3c64xx/include/mach/regs-srom.h
+++ b/arch/arm/mach-s3c64xx/regs-srom.h
@@ -1,5 +1,4 @@
-/* arch/arm/plat-s3c64xx/include/plat/regs-srom.h
- *
+/*
* Copyright 2009 Andy Green <andy@warmcat.com>
*
* S3C64XX SROM definitions
@@ -9,8 +8,8 @@
* published by the Free Software Foundation.
*/
-#ifndef __PLAT_REGS_SROM_H
-#define __PLAT_REGS_SROM_H __FILE__
+#ifndef __MACH_S3C64XX_REGS_SROM_H
+#define __MACH_S3C64XX_REGS_SROM_H __FILE__
#define S3C64XX_SROMREG(x) (S3C_VA_MEM + (x))
@@ -29,7 +28,7 @@
#define S3C64XX_SROM_BW__DATAWIDTH__SHIFT 0
#define S3C64XX_SROM_BW__WAITENABLE__SHIFT 2
#define S3C64XX_SROM_BW__BYTEENABLE__SHIFT 3
-#define S3C64XX_SROM_BW__CS_MASK 0xf
+#define S3C64XX_SROM_BW__CS_MASK 0xf
#define S3C64XX_SROM_BW__NCS0__SHIFT 0
#define S3C64XX_SROM_BW__NCS1__SHIFT 4
@@ -56,4 +55,4 @@
#define S3C64XX_SROM_BCX__TACS__SHIFT 28
#define S3C64XX_SROM_BCX__TACS__MASK 0xf
-#endif /* _PLAT_REGS_SROM_H */
+#endif /* __MACH_S3C64XX_REGS_SROM_H */
diff --git a/arch/arm/mach-s3c64xx/regs-sys.h b/arch/arm/mach-s3c64xx/regs-sys.h
new file mode 100644
index 0000000..8c411fb
--- /dev/null
+++ b/arch/arm/mach-s3c64xx/regs-sys.h
@@ -0,0 +1,30 @@
+/*
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ * http://armlinux.simtec.co.uk/
+ *
+ * S3C64XX system register definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __MACH_S3C64XX_REGS_SYS_H
+#define __MACH_S3C64XX_REGS_SYS_H __FILE__
+
+#define S3C_SYSREG(x) (S3C_VA_SYS + (x))
+
+#define S3C64XX_AHB_CON0 S3C_SYSREG(0x100)
+#define S3C64XX_AHB_CON1 S3C_SYSREG(0x104)
+#define S3C64XX_AHB_CON2 S3C_SYSREG(0x108)
+
+#define S3C64XX_SDMA_SEL S3C_SYSREG(0x110)
+
+#define S3C64XX_OTHERS S3C_SYSREG(0x900)
+
+#define S3C64XX_OTHERS_USBMASK (1 << 16)
+#define S3C64XX_OTHERS_SYNCMUXSEL (1 << 6)
+
+#endif /* __MACH_S3C64XX_REGS_SYS_H */
diff --git a/arch/arm/mach-s3c64xx/include/mach/regs-syscon-power.h b/arch/arm/mach-s3c64xx/regs-syscon-power.h
similarity index 94%
rename from arch/arm/mach-s3c64xx/include/mach/regs-syscon-power.h
rename to arch/arm/mach-s3c64xx/regs-syscon-power.h
index 270d96a..6e16b34 100644
--- a/arch/arm/mach-s3c64xx/include/mach/regs-syscon-power.h
+++ b/arch/arm/mach-s3c64xx/regs-syscon-power.h
@@ -1,5 +1,4 @@
-/* arch/arm/plat-s3c64xx/include/plat/regs-syscon-power.h
- *
+/*
* Copyright 2008 Openmoko, Inc.
* Copyright 2008 Simtec Electronics
* http://armlinux.simtec.co.uk/
@@ -12,8 +11,8 @@
* published by the Free Software Foundation.
*/
-#ifndef __PLAT_S3C64XX_REGS_SYSCON_POWER_H
-#define __PLAT_S3C64XX_REGS_SYSCON_POWER_H __FILE__
+#ifndef __MACH_S3C64XX_REGS_SYSCON_POWER_H
+#define __MACH_S3C64XX_REGS_SYSCON_POWER_H __FILE__
#define S3C64XX_PWR_CFG S3C_SYSREG(0x804)
@@ -113,4 +112,4 @@
#define S3C64XX_INFORM2 S3C_SYSREG(0xA08)
#define S3C64XX_INFORM3 S3C_SYSREG(0xA0C)
-#endif /* __PLAT_S3C64XX_REGS_SYSCON_POWER_H */
+#endif /* __MACH_S3C64XX_REGS_SYSCON_POWER_H */
diff --git a/arch/arm/mach-s3c64xx/setup-usb-phy.c b/arch/arm/mach-s3c64xx/setup-usb-phy.c
index f6757e0..c8174d9 100644
--- a/arch/arm/mach-s3c64xx/setup-usb-phy.c
+++ b/arch/arm/mach-s3c64xx/setup-usb-phy.c
@@ -15,11 +15,12 @@
#include <linux/io.h>
#include <linux/platform_device.h>
#include <mach/map.h>
-#include <mach/regs-sys.h>
#include <plat/cpu.h>
#include <plat/regs-usb-hsotg-phy.h>
#include <plat/usb-phy.h>
+#include "regs-sys.h"
+
static int s3c_usb_otgphy_init(struct platform_device *pdev)
{
struct clk *xusbxti;
diff --git a/arch/arm/mach-s5p64x0/clock-s5p6440.c b/arch/arm/mach-s5p64x0/clock-s5p6440.c
index 5112371..35378152 100644
--- a/arch/arm/mach-s5p64x0/clock-s5p6440.c
+++ b/arch/arm/mach-s5p64x0/clock-s5p6440.c
@@ -23,7 +23,6 @@
#include <mach/hardware.h>
#include <mach/map.h>
#include <mach/regs-clock.h>
-#include <mach/s5p64x0-clock.h>
#include <plat/cpu-freq.h>
#include <plat/clock.h>
@@ -32,6 +31,7 @@
#include <plat/s5p-clock.h>
#include <plat/clock-clksrc.h>
+#include "clock.h"
#include "common.h"
static u32 epll_div[][5] = {
diff --git a/arch/arm/mach-s5p64x0/clock-s5p6450.c b/arch/arm/mach-s5p64x0/clock-s5p6450.c
index 154dea7..af384dd 100644
--- a/arch/arm/mach-s5p64x0/clock-s5p6450.c
+++ b/arch/arm/mach-s5p64x0/clock-s5p6450.c
@@ -23,7 +23,6 @@
#include <mach/hardware.h>
#include <mach/map.h>
#include <mach/regs-clock.h>
-#include <mach/s5p64x0-clock.h>
#include <plat/cpu-freq.h>
#include <plat/clock.h>
@@ -32,6 +31,7 @@
#include <plat/s5p-clock.h>
#include <plat/clock-clksrc.h>
+#include "clock.h"
#include "common.h"
static struct clksrc_clk clk_mout_dpll = {
diff --git a/arch/arm/mach-s5p64x0/include/mach/s5p64x0-clock.h b/arch/arm/mach-s5p64x0/clock.h
similarity index 87%
rename from arch/arm/mach-s5p64x0/include/mach/s5p64x0-clock.h
rename to arch/arm/mach-s5p64x0/clock.h
index 0ef47d1..28b8e3c 100644
--- a/arch/arm/mach-s5p64x0/include/mach/s5p64x0-clock.h
+++ b/arch/arm/mach-s5p64x0/clock.h
@@ -1,5 +1,4 @@
-/* linux/arch/arm/mach-s5p64x0/include/mach/s5p64x0-clock.h
- *
+/*
* Copyright (c) 2010 Samsung Electronics Co., Ltd.
* http://www.samsung.com
*
@@ -10,8 +9,8 @@
* published by the Free Software Foundation.
*/
-#ifndef __ASM_ARCH_CLOCK_H
-#define __ASM_ARCH_CLOCK_H __FILE__
+#ifndef __MACH_S5P64X0_CLOCK_H
+#define __MACH_S5P64X0_CLOCK_H __FILE__
#include <linux/clk.h>
@@ -36,4 +35,4 @@
extern int s5p64x0_clk48m_ctrl(struct clk *clk, int enable);
-#endif /* __ASM_ARCH_CLOCK_H */
+#endif /* __MACH_S5P64X0_CLOCK_H */
diff --git a/arch/arm/mach-s5p64x0/gpiolib.c b/arch/arm/mach-s5p64x0/gpiolib.c
deleted file mode 100644
index 700dac6..0000000
--- a/arch/arm/mach-s5p64x0/gpiolib.c
+++ /dev/null
@@ -1,508 +0,0 @@
-/* linux/arch/arm/mach-s5p64x0/gpiolib.c
- *
- * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd.
- * http://www.samsung.com
- *
- * S5P64X0 - GPIOlib support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/irq.h>
-#include <linux/io.h>
-#include <linux/gpio.h>
-
-#include <mach/map.h>
-#include <mach/regs-gpio.h>
-#include <mach/regs-clock.h>
-
-#include <plat/cpu.h>
-#include <plat/gpio-core.h>
-#include <plat/gpio-cfg.h>
-#include <plat/gpio-cfg-helpers.h>
-
-/*
- * S5P6440 GPIO bank summary:
- *
- * Bank GPIOs Style SlpCon ExtInt Group
- * A 6 4Bit Yes 1
- * B 7 4Bit Yes 1
- * C 8 4Bit Yes 2
- * F 2 2Bit Yes 4 [1]
- * G 7 4Bit Yes 5
- * H 10 4Bit[2] Yes 6
- * I 16 2Bit Yes None
- * J 12 2Bit Yes None
- * N 16 2Bit No IRQ_EINT
- * P 8 2Bit Yes 8
- * R 15 4Bit[2] Yes 8
- *
- * S5P6450 GPIO bank summary:
- *
- * Bank GPIOs Style SlpCon ExtInt Group
- * A 6 4Bit Yes 1
- * B 7 4Bit Yes 1
- * C 8 4Bit Yes 2
- * D 8 4Bit Yes None
- * F 2 2Bit Yes None
- * G 14 4Bit[2] Yes 5
- * H 10 4Bit[2] Yes 6
- * I 16 2Bit Yes None
- * J 12 2Bit Yes None
- * K 5 4Bit Yes None
- * N 16 2Bit No IRQ_EINT
- * P 11 2Bit Yes 8
- * Q 14 2Bit Yes None
- * R 15 4Bit[2] Yes None
- * S 8 2Bit Yes None
- *
- * [1] BANKF pins 14,15 do not form part of the external interrupt sources
- * [2] BANK has two control registers, GPxCON0 and GPxCON1
- */
-
-static int s5p64x0_gpiolib_rbank_4bit2_input(struct gpio_chip *chip,
- unsigned int offset)
-{
- struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip);
- void __iomem *base = ourchip->base;
- void __iomem *regcon = base;
- unsigned long con;
- unsigned long flags;
-
- switch (offset) {
- case 6:
- offset += 1;
- case 0:
- case 1:
- case 2:
- case 3:
- case 4:
- case 5:
- regcon -= 4;
- break;
- default:
- offset -= 7;
- break;
- }
-
- s3c_gpio_lock(ourchip, flags);
-
- con = __raw_readl(regcon);
- con &= ~(0xf << con_4bit_shift(offset));
- __raw_writel(con, regcon);
-
- s3c_gpio_unlock(ourchip, flags);
-
- return 0;
-}
-
-static int s5p64x0_gpiolib_rbank_4bit2_output(struct gpio_chip *chip,
- unsigned int offset, int value)
-{
- struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip);
- void __iomem *base = ourchip->base;
- void __iomem *regcon = base;
- unsigned long con;
- unsigned long dat;
- unsigned long flags;
- unsigned con_offset = offset;
-
- switch (con_offset) {
- case 6:
- con_offset += 1;
- case 0:
- case 1:
- case 2:
- case 3:
- case 4:
- case 5:
- regcon -= 4;
- break;
- default:
- con_offset -= 7;
- break;
- }
-
- s3c_gpio_lock(ourchip, flags);
-
- con = __raw_readl(regcon);
- con &= ~(0xf << con_4bit_shift(con_offset));
- con |= 0x1 << con_4bit_shift(con_offset);
-
- dat = __raw_readl(base + GPIODAT_OFF);
- if (value)
- dat |= 1 << offset;
- else
- dat &= ~(1 << offset);
-
- __raw_writel(con, regcon);
- __raw_writel(dat, base + GPIODAT_OFF);
-
- s3c_gpio_unlock(ourchip, flags);
-
- return 0;
-}
-
-int s5p64x0_gpio_setcfg_4bit_rbank(struct s3c_gpio_chip *chip,
- unsigned int off, unsigned int cfg)
-{
- void __iomem *reg = chip->base;
- unsigned int shift;
- u32 con;
-
- switch (off) {
- case 0:
- case 1:
- case 2:
- case 3:
- case 4:
- case 5:
- shift = (off & 7) * 4;
- reg -= 4;
- break;
- case 6:
- shift = ((off + 1) & 7) * 4;
- reg -= 4;
- default:
- shift = ((off + 1) & 7) * 4;
- break;
- }
-
- if (s3c_gpio_is_cfg_special(cfg)) {
- cfg &= 0xf;
- cfg <<= shift;
- }
-
- con = __raw_readl(reg);
- con &= ~(0xf << shift);
- con |= cfg;
- __raw_writel(con, reg);
-
- return 0;
-}
-
-static struct s3c_gpio_cfg s5p64x0_gpio_cfgs[] = {
- {
- .cfg_eint = 0,
- }, {
- .cfg_eint = 7,
- }, {
- .cfg_eint = 3,
- .set_config = s5p64x0_gpio_setcfg_4bit_rbank,
- }, {
- .cfg_eint = 0,
- .set_config = s3c_gpio_setcfg_s3c24xx,
- .get_config = s3c_gpio_getcfg_s3c24xx,
- }, {
- .cfg_eint = 2,
- .set_config = s3c_gpio_setcfg_s3c24xx,
- .get_config = s3c_gpio_getcfg_s3c24xx,
- }, {
- .cfg_eint = 3,
- .set_config = s3c_gpio_setcfg_s3c24xx,
- .get_config = s3c_gpio_getcfg_s3c24xx,
- },
-};
-
-static struct s3c_gpio_chip s5p6440_gpio_4bit[] = {
- {
- .base = S5P64X0_GPA_BASE,
- .config = &s5p64x0_gpio_cfgs[1],
- .chip = {
- .base = S5P6440_GPA(0),
- .ngpio = S5P6440_GPIO_A_NR,
- .label = "GPA",
- },
- }, {
- .base = S5P64X0_GPB_BASE,
- .config = &s5p64x0_gpio_cfgs[1],
- .chip = {
- .base = S5P6440_GPB(0),
- .ngpio = S5P6440_GPIO_B_NR,
- .label = "GPB",
- },
- }, {
- .base = S5P64X0_GPC_BASE,
- .config = &s5p64x0_gpio_cfgs[1],
- .chip = {
- .base = S5P6440_GPC(0),
- .ngpio = S5P6440_GPIO_C_NR,
- .label = "GPC",
- },
- }, {
- .base = S5P64X0_GPG_BASE,
- .config = &s5p64x0_gpio_cfgs[1],
- .chip = {
- .base = S5P6440_GPG(0),
- .ngpio = S5P6440_GPIO_G_NR,
- .label = "GPG",
- },
- },
-};
-
-static struct s3c_gpio_chip s5p6440_gpio_4bit2[] = {
- {
- .base = S5P64X0_GPH_BASE + 0x4,
- .config = &s5p64x0_gpio_cfgs[1],
- .chip = {
- .base = S5P6440_GPH(0),
- .ngpio = S5P6440_GPIO_H_NR,
- .label = "GPH",
- },
- },
-};
-
-static struct s3c_gpio_chip s5p6440_gpio_rbank_4bit2[] = {
- {
- .base = S5P64X0_GPR_BASE + 0x4,
- .config = &s5p64x0_gpio_cfgs[2],
- .chip = {
- .base = S5P6440_GPR(0),
- .ngpio = S5P6440_GPIO_R_NR,
- .label = "GPR",
- },
- },
-};
-
-static struct s3c_gpio_chip s5p6440_gpio_2bit[] = {
- {
- .base = S5P64X0_GPF_BASE,
- .config = &s5p64x0_gpio_cfgs[5],
- .chip = {
- .base = S5P6440_GPF(0),
- .ngpio = S5P6440_GPIO_F_NR,
- .label = "GPF",
- },
- }, {
- .base = S5P64X0_GPI_BASE,
- .config = &s5p64x0_gpio_cfgs[3],
- .chip = {
- .base = S5P6440_GPI(0),
- .ngpio = S5P6440_GPIO_I_NR,
- .label = "GPI",
- },
- }, {
- .base = S5P64X0_GPJ_BASE,
- .config = &s5p64x0_gpio_cfgs[3],
- .chip = {
- .base = S5P6440_GPJ(0),
- .ngpio = S5P6440_GPIO_J_NR,
- .label = "GPJ",
- },
- }, {
- .base = S5P64X0_GPN_BASE,
- .config = &s5p64x0_gpio_cfgs[4],
- .chip = {
- .base = S5P6440_GPN(0),
- .ngpio = S5P6440_GPIO_N_NR,
- .label = "GPN",
- },
- }, {
- .base = S5P64X0_GPP_BASE,
- .config = &s5p64x0_gpio_cfgs[5],
- .chip = {
- .base = S5P6440_GPP(0),
- .ngpio = S5P6440_GPIO_P_NR,
- .label = "GPP",
- },
- },
-};
-
-static struct s3c_gpio_chip s5p6450_gpio_4bit[] = {
- {
- .base = S5P64X0_GPA_BASE,
- .config = &s5p64x0_gpio_cfgs[1],
- .chip = {
- .base = S5P6450_GPA(0),
- .ngpio = S5P6450_GPIO_A_NR,
- .label = "GPA",
- },
- }, {
- .base = S5P64X0_GPB_BASE,
- .config = &s5p64x0_gpio_cfgs[1],
- .chip = {
- .base = S5P6450_GPB(0),
- .ngpio = S5P6450_GPIO_B_NR,
- .label = "GPB",
- },
- }, {
- .base = S5P64X0_GPC_BASE,
- .config = &s5p64x0_gpio_cfgs[1],
- .chip = {
- .base = S5P6450_GPC(0),
- .ngpio = S5P6450_GPIO_C_NR,
- .label = "GPC",
- },
- }, {
- .base = S5P6450_GPD_BASE,
- .config = &s5p64x0_gpio_cfgs[1],
- .chip = {
- .base = S5P6450_GPD(0),
- .ngpio = S5P6450_GPIO_D_NR,
- .label = "GPD",
- },
- }, {
- .base = S5P6450_GPK_BASE,
- .config = &s5p64x0_gpio_cfgs[1],
- .chip = {
- .base = S5P6450_GPK(0),
- .ngpio = S5P6450_GPIO_K_NR,
- .label = "GPK",
- },
- },
-};
-
-static struct s3c_gpio_chip s5p6450_gpio_4bit2[] = {
- {
- .base = S5P64X0_GPG_BASE + 0x4,
- .config = &s5p64x0_gpio_cfgs[1],
- .chip = {
- .base = S5P6450_GPG(0),
- .ngpio = S5P6450_GPIO_G_NR,
- .label = "GPG",
- },
- }, {
- .base = S5P64X0_GPH_BASE + 0x4,
- .config = &s5p64x0_gpio_cfgs[1],
- .chip = {
- .base = S5P6450_GPH(0),
- .ngpio = S5P6450_GPIO_H_NR,
- .label = "GPH",
- },
- },
-};
-
-static struct s3c_gpio_chip s5p6450_gpio_rbank_4bit2[] = {
- {
- .base = S5P64X0_GPR_BASE + 0x4,
- .config = &s5p64x0_gpio_cfgs[2],
- .chip = {
- .base = S5P6450_GPR(0),
- .ngpio = S5P6450_GPIO_R_NR,
- .label = "GPR",
- },
- },
-};
-
-static struct s3c_gpio_chip s5p6450_gpio_2bit[] = {
- {
- .base = S5P64X0_GPF_BASE,
- .config = &s5p64x0_gpio_cfgs[5],
- .chip = {
- .base = S5P6450_GPF(0),
- .ngpio = S5P6450_GPIO_F_NR,
- .label = "GPF",
- },
- }, {
- .base = S5P64X0_GPI_BASE,
- .config = &s5p64x0_gpio_cfgs[3],
- .chip = {
- .base = S5P6450_GPI(0),
- .ngpio = S5P6450_GPIO_I_NR,
- .label = "GPI",
- },
- }, {
- .base = S5P64X0_GPJ_BASE,
- .config = &s5p64x0_gpio_cfgs[3],
- .chip = {
- .base = S5P6450_GPJ(0),
- .ngpio = S5P6450_GPIO_J_NR,
- .label = "GPJ",
- },
- }, {
- .base = S5P64X0_GPN_BASE,
- .config = &s5p64x0_gpio_cfgs[4],
- .chip = {
- .base = S5P6450_GPN(0),
- .ngpio = S5P6450_GPIO_N_NR,
- .label = "GPN",
- },
- }, {
- .base = S5P64X0_GPP_BASE,
- .config = &s5p64x0_gpio_cfgs[5],
- .chip = {
- .base = S5P6450_GPP(0),
- .ngpio = S5P6450_GPIO_P_NR,
- .label = "GPP",
- },
- }, {
- .base = S5P6450_GPQ_BASE,
- .config = &s5p64x0_gpio_cfgs[4],
- .chip = {
- .base = S5P6450_GPQ(0),
- .ngpio = S5P6450_GPIO_Q_NR,
- .label = "GPQ",
- },
- }, {
- .base = S5P6450_GPS_BASE,
- .config = &s5p64x0_gpio_cfgs[5],
- .chip = {
- .base = S5P6450_GPS(0),
- .ngpio = S5P6450_GPIO_S_NR,
- .label = "GPS",
- },
- },
-};
-
-void __init s5p64x0_gpiolib_set_cfg(struct s3c_gpio_cfg *chipcfg, int nr_chips)
-{
- for (; nr_chips > 0; nr_chips--, chipcfg++) {
- if (!chipcfg->set_config)
- chipcfg->set_config = s3c_gpio_setcfg_s3c64xx_4bit;
- if (!chipcfg->get_config)
- chipcfg->get_config = s3c_gpio_getcfg_s3c64xx_4bit;
- if (!chipcfg->set_pull)
- chipcfg->set_pull = s3c_gpio_setpull_updown;
- if (!chipcfg->get_pull)
- chipcfg->get_pull = s3c_gpio_getpull_updown;
- }
-}
-
-static void __init s5p64x0_gpio_add_rbank_4bit2(struct s3c_gpio_chip *chip,
- int nr_chips)
-{
- for (; nr_chips > 0; nr_chips--, chip++) {
- chip->chip.direction_input = s5p64x0_gpiolib_rbank_4bit2_input;
- chip->chip.direction_output =
- s5p64x0_gpiolib_rbank_4bit2_output;
- s3c_gpiolib_add(chip);
- }
-}
-
-static int __init s5p64x0_gpiolib_init(void)
-{
- s5p64x0_gpiolib_set_cfg(s5p64x0_gpio_cfgs,
- ARRAY_SIZE(s5p64x0_gpio_cfgs));
-
- if (soc_is_s5p6450()) {
- samsung_gpiolib_add_2bit_chips(s5p6450_gpio_2bit,
- ARRAY_SIZE(s5p6450_gpio_2bit));
-
- samsung_gpiolib_add_4bit_chips(s5p6450_gpio_4bit,
- ARRAY_SIZE(s5p6450_gpio_4bit));
-
- samsung_gpiolib_add_4bit2_chips(s5p6450_gpio_4bit2,
- ARRAY_SIZE(s5p6450_gpio_4bit2));
-
- s5p64x0_gpio_add_rbank_4bit2(s5p6450_gpio_rbank_4bit2,
- ARRAY_SIZE(s5p6450_gpio_rbank_4bit2));
- } else {
- samsung_gpiolib_add_2bit_chips(s5p6440_gpio_2bit,
- ARRAY_SIZE(s5p6440_gpio_2bit));
-
- samsung_gpiolib_add_4bit_chips(s5p6440_gpio_4bit,
- ARRAY_SIZE(s5p6440_gpio_4bit));
-
- samsung_gpiolib_add_4bit2_chips(s5p6440_gpio_4bit2,
- ARRAY_SIZE(s5p6440_gpio_4bit2));
-
- s5p64x0_gpio_add_rbank_4bit2(s5p6440_gpio_rbank_4bit2,
- ARRAY_SIZE(s5p6440_gpio_rbank_4bit2));
- }
-
- return 0;
-}
-core_initcall(s5p64x0_gpiolib_init);
diff --git a/arch/arm/mach-s5p64x0/include/mach/i2c.h b/arch/arm/mach-s5p64x0/i2c.h
similarity index 91%
rename from arch/arm/mach-s5p64x0/include/mach/i2c.h
rename to arch/arm/mach-s5p64x0/i2c.h
index 887d252..1e5bb4e 100644
--- a/arch/arm/mach-s5p64x0/include/mach/i2c.h
+++ b/arch/arm/mach-s5p64x0/i2c.h
@@ -1,5 +1,4 @@
-/* linux/arch/arm/mach-s5p64x0/include/mach/i2c.h
- *
+/*
* Copyright (c) 2010 Samsung Electronics Co., Ltd.
* http://www.samsung.com
*
diff --git a/arch/arm/mach-s5p64x0/include/mach/regs-irq.h b/arch/arm/mach-s5p64x0/include/mach/regs-irq.h
index 4aaebda..d60397d 100644
--- a/arch/arm/mach-s5p64x0/include/mach/regs-irq.h
+++ b/arch/arm/mach-s5p64x0/include/mach/regs-irq.h
@@ -13,7 +13,6 @@
#ifndef __ASM_ARCH_REGS_IRQ_H
#define __ASM_ARCH_REGS_IRQ_H __FILE__
-#include <asm/hardware/vic.h>
#include <mach/map.h>
#endif /* __ASM_ARCH_REGS_IRQ_H */
diff --git a/arch/arm/mach-s5p64x0/include/mach/tick.h b/arch/arm/mach-s5p64x0/include/mach/tick.h
deleted file mode 100644
index 00aa7f1..0000000
--- a/arch/arm/mach-s5p64x0/include/mach/tick.h
+++ /dev/null
@@ -1,29 +0,0 @@
-/* linux/arch/arm/mach-s5p64x0/include/mach/tick.h
- *
- * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd.
- * http://www.samsung.com
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- * http://armlinux.simtec.co.uk/
- * Ben Dooks <ben@simtec.co.uk>
- *
- * S5P64X0 - Timer tick support definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_TICK_H
-#define __ASM_ARCH_TICK_H __FILE__
-
-static inline u32 s3c24xx_ostimer_pending(void)
-{
- u32 pend = __raw_readl(VA_VIC0 + VIC_RAW_STATUS);
- return pend & (1 << (IRQ_TIMER4_VIC - S5P_IRQ_VIC0(0)));
-}
-
-#define TICK_MAX (0xffffffff)
-
-#endif /* __ASM_ARCH_TICK_H */
diff --git a/arch/arm/mach-s5p64x0/include/mach/uncompress.h b/arch/arm/mach-s5p64x0/include/mach/uncompress.h
index 1608faf..19e0d64 100644
--- a/arch/arm/mach-s5p64x0/include/mach/uncompress.h
+++ b/arch/arm/mach-s5p64x0/include/mach/uncompress.h
@@ -116,33 +116,6 @@
*((volatile unsigned int __force *)(ad)) = (d); \
} while (0)
-/*
- * CONFIG_S3C_BOOT_WATCHDOG
- *
- * Simple boot-time watchdog setup, to reboot the system if there is
- * any problem with the boot process
- */
-
-#ifdef CONFIG_S3C_BOOT_WATCHDOG
-
-#define WDOG_COUNT (0xff00)
-
-static inline void arch_decomp_wdog(void)
-{
- __raw_writel(WDOG_COUNT, S3C2410_WTCNT);
-}
-
-static void arch_decomp_wdog_start(void)
-{
- __raw_writel(WDOG_COUNT, S3C2410_WTDAT);
- __raw_writel(WDOG_COUNT, S3C2410_WTCNT);
- __raw_writel(S3C2410_WTCON_ENABLE | S3C2410_WTCON_DIV128 | S3C2410_WTCON_RSTEN | S3C2410_WTCON_PRESCALE(0x80), S3C2410_WTCON);
-}
-
-#else
-#define arch_decomp_wdog_start()
-#define arch_decomp_wdog()
-#endif
#ifdef CONFIG_S3C_BOOT_ERROR_RESET
@@ -192,7 +165,6 @@
*/
arch_detect_cpu();
- arch_decomp_wdog_start();
/*
* Enable the UART FIFOs if they where not enabled and our
diff --git a/arch/arm/mach-s5p64x0/mach-smdk6440.c b/arch/arm/mach-s5p64x0/mach-smdk6440.c
index 1af8235..e23723a 100644
--- a/arch/arm/mach-s5p64x0/mach-smdk6440.c
+++ b/arch/arm/mach-s5p64x0/mach-smdk6440.c
@@ -29,7 +29,6 @@
#include <video/platform_lcd.h>
#include <video/samsung_fimd.h>
-#include <asm/hardware/vic.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/irq.h>
@@ -38,7 +37,6 @@
#include <mach/hardware.h>
#include <mach/map.h>
#include <mach/regs-clock.h>
-#include <mach/i2c.h>
#include <mach/regs-gpio.h>
#include <plat/regs-serial.h>
@@ -56,6 +54,7 @@
#include <plat/sdhci.h>
#include "common.h"
+#include "i2c.h"
#define SMDK6440_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \
S3C2410_UCON_RXILEVEL | \
@@ -272,9 +271,8 @@
.atag_offset = 0x100,
.init_irq = s5p6440_init_irq,
- .handle_irq = vic_handle_irq,
.map_io = smdk6440_map_io,
.init_machine = smdk6440_machine_init,
- .timer = &s5p_timer,
+ .init_time = s5p_timer_init,
.restart = s5p64x0_restart,
MACHINE_END
diff --git a/arch/arm/mach-s5p64x0/mach-smdk6450.c b/arch/arm/mach-s5p64x0/mach-smdk6450.c
index 62526cc..ca10963 100644
--- a/arch/arm/mach-s5p64x0/mach-smdk6450.c
+++ b/arch/arm/mach-s5p64x0/mach-smdk6450.c
@@ -29,7 +29,6 @@
#include <video/platform_lcd.h>
#include <video/samsung_fimd.h>
-#include <asm/hardware/vic.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/irq.h>
@@ -38,7 +37,6 @@
#include <mach/hardware.h>
#include <mach/map.h>
#include <mach/regs-clock.h>
-#include <mach/i2c.h>
#include <mach/regs-gpio.h>
#include <plat/regs-serial.h>
@@ -56,6 +54,7 @@
#include <plat/sdhci.h>
#include "common.h"
+#include "i2c.h"
#define SMDK6450_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \
S3C2410_UCON_RXILEVEL | \
@@ -291,9 +290,8 @@
.atag_offset = 0x100,
.init_irq = s5p6450_init_irq,
- .handle_irq = vic_handle_irq,
.map_io = smdk6450_map_io,
.init_machine = smdk6450_machine_init,
- .timer = &s5p_timer,
+ .init_time = s5p_timer_init,
.restart = s5p64x0_restart,
MACHINE_END
diff --git a/arch/arm/mach-s5p64x0/setup-i2c0.c b/arch/arm/mach-s5p64x0/setup-i2c0.c
index a32edc5..569b76a 100644
--- a/arch/arm/mach-s5p64x0/setup-i2c0.c
+++ b/arch/arm/mach-s5p64x0/setup-i2c0.c
@@ -21,7 +21,7 @@
#include <plat/gpio-cfg.h>
#include <linux/platform_data/i2c-s3c2410.h>
-#include <mach/i2c.h>
+#include "i2c.h"
void s5p6440_i2c0_cfg_gpio(struct platform_device *dev)
{
diff --git a/arch/arm/mach-s5p64x0/setup-i2c1.c b/arch/arm/mach-s5p64x0/setup-i2c1.c
index ca2c5c7..867374e 100644
--- a/arch/arm/mach-s5p64x0/setup-i2c1.c
+++ b/arch/arm/mach-s5p64x0/setup-i2c1.c
@@ -21,7 +21,7 @@
#include <plat/gpio-cfg.h>
#include <linux/platform_data/i2c-s3c2410.h>
-#include <mach/i2c.h>
+#include "i2c.h"
void s5p6440_i2c1_cfg_gpio(struct platform_device *dev)
{
diff --git a/arch/arm/mach-s5pc100/include/mach/regs-irq.h b/arch/arm/mach-s5pc100/include/mach/regs-irq.h
index 4d9036d..7616278 100644
--- a/arch/arm/mach-s5pc100/include/mach/regs-irq.h
+++ b/arch/arm/mach-s5pc100/include/mach/regs-irq.h
@@ -14,6 +14,5 @@
#define __ASM_ARCH_REGS_IRQ_H __FILE__
#include <mach/map.h>
-#include <asm/hardware/vic.h>
#endif /* __ASM_ARCH_REGS_IRQ_H */
diff --git a/arch/arm/mach-s5pc100/include/mach/tick.h b/arch/arm/mach-s5pc100/include/mach/tick.h
index 20f6873..0af8e41 100644
--- a/arch/arm/mach-s5pc100/include/mach/tick.h
+++ b/arch/arm/mach-s5pc100/include/mach/tick.h
@@ -15,6 +15,8 @@
#ifndef __ASM_ARCH_TICK_H
#define __ASM_ARCH_TICK_H __FILE__
+#include <linux/irqchip/arm-vic.h>
+
/* note, the timer interrutps turn up in 2 places, the vic and then
* the timer block. We take the VIC as the base at the moment.
*/
diff --git a/arch/arm/mach-s5pc100/mach-smdkc100.c b/arch/arm/mach-s5pc100/mach-smdkc100.c
index 9abe95e..185a195 100644
--- a/arch/arm/mach-s5pc100/mach-smdkc100.c
+++ b/arch/arm/mach-s5pc100/mach-smdkc100.c
@@ -25,7 +25,6 @@
#include <linux/input.h>
#include <linux/pwm_backlight.h>
-#include <asm/hardware/vic.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
@@ -254,9 +253,8 @@
/* Maintainer: Byungho Min <bhmin@samsung.com> */
.atag_offset = 0x100,
.init_irq = s5pc100_init_irq,
- .handle_irq = vic_handle_irq,
.map_io = smdkc100_map_io,
.init_machine = smdkc100_machine_init,
- .timer = &s3c24xx_timer,
+ .init_time = s3c24xx_timer_init,
.restart = s5pc100_restart,
MACHINE_END
diff --git a/arch/arm/mach-s5pv210/dev-audio.c b/arch/arm/mach-s5pv210/dev-audio.c
index addfb16..2d67361 100644
--- a/arch/arm/mach-s5pv210/dev-audio.c
+++ b/arch/arm/mach-s5pv210/dev-audio.c
@@ -18,7 +18,8 @@
#include <mach/map.h>
#include <mach/dma.h>
#include <mach/irqs.h>
-#include <mach/regs-audss.h>
+
+#define S5PV210_AUDSS_INT_MEM (0xC0000000)
static int s5pv210_cfg_i2s(struct platform_device *pdev)
{
diff --git a/arch/arm/mach-s5pv210/include/mach/regs-audss.h b/arch/arm/mach-s5pv210/include/mach/regs-audss.h
deleted file mode 100644
index eacc1f7..0000000
--- a/arch/arm/mach-s5pv210/include/mach/regs-audss.h
+++ /dev/null
@@ -1,18 +0,0 @@
-/* arch/arm/mach-s5pv210/include/mach/regs-audss.h
- *
- * Copyright (c) 2011 Samsung Electronics
- * http://www.samsung.com
- *
- * S5PV210 Audio SubSystem clock register definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __PLAT_REGS_AUDSS_H
-#define __PLAT_REGS_AUDSS_H __FILE__
-
-#define S5PV210_AUDSS_INT_MEM (0xC0000000)
-
-#endif /* _PLAT_REGS_AUDSS_H */
diff --git a/arch/arm/mach-s5pv210/include/mach/regs-irq.h b/arch/arm/mach-s5pv210/include/mach/regs-irq.h
index 5c3b104..d8bc1e6 100644
--- a/arch/arm/mach-s5pv210/include/mach/regs-irq.h
+++ b/arch/arm/mach-s5pv210/include/mach/regs-irq.h
@@ -13,7 +13,6 @@
#ifndef __ASM_ARCH_REGS_IRQ_H
#define __ASM_ARCH_REGS_IRQ_H __FILE__
-#include <asm/hardware/vic.h>
#include <mach/map.h>
#endif /* __ASM_ARCH_REGS_IRQ_H */
diff --git a/arch/arm/mach-s5pv210/include/mach/regs-sys.h b/arch/arm/mach-s5pv210/include/mach/regs-sys.h
deleted file mode 100644
index cccb1ed..0000000
--- a/arch/arm/mach-s5pv210/include/mach/regs-sys.h
+++ /dev/null
@@ -1,15 +0,0 @@
-/* arch/arm/mach-s5pv210/include/mach/regs-sys.h
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- * http://www.samsung.com/
- *
- * S5PV210 - System registers definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#define S5PV210_USB_PHY_CON (S3C_VA_SYS + 0xE80C)
-#define S5PV210_USB_PHY0_EN (1 << 0)
-#define S5PV210_USB_PHY1_EN (1 << 1)
diff --git a/arch/arm/mach-s5pv210/include/mach/tick.h b/arch/arm/mach-s5pv210/include/mach/tick.h
deleted file mode 100644
index 7993b36..0000000
--- a/arch/arm/mach-s5pv210/include/mach/tick.h
+++ /dev/null
@@ -1,26 +0,0 @@
-/* linux/arch/arm/mach-s5pv210/include/mach/tick.h
- *
- * Copyright (c) 2009 Samsung Electronics Co., Ltd.
- * http://www.samsung.com/
- *
- * Based on arch/arm/mach-s3c6400/include/mach/tick.h
- *
- * S5PV210 - Timer tick support definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_TICK_H
-#define __ASM_ARCH_TICK_H __FILE__
-
-static inline u32 s3c24xx_ostimer_pending(void)
-{
- u32 pend = __raw_readl(VA_VIC0 + VIC_RAW_STATUS);
- return pend & (1 << (IRQ_TIMER4_VIC - S5P_IRQ_VIC0(0)));
-}
-
-#define TICK_MAX (0xffffffff)
-
-#endif /* __ASM_ARCH_TICK_H */
diff --git a/arch/arm/mach-s5pv210/mach-aquila.c b/arch/arm/mach-s5pv210/mach-aquila.c
index ee9fa5c..11900a8 100644
--- a/arch/arm/mach-s5pv210/mach-aquila.c
+++ b/arch/arm/mach-s5pv210/mach-aquila.c
@@ -22,7 +22,6 @@
#include <linux/input.h>
#include <linux/gpio.h>
-#include <asm/hardware/vic.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/setup.h>
@@ -685,9 +684,8 @@
Kyungmin Park <kyungmin.park@samsung.com> */
.atag_offset = 0x100,
.init_irq = s5pv210_init_irq,
- .handle_irq = vic_handle_irq,
.map_io = aquila_map_io,
.init_machine = aquila_machine_init,
- .timer = &s5p_timer,
+ .init_time = s5p_timer_init,
.restart = s5pv210_restart,
MACHINE_END
diff --git a/arch/arm/mach-s5pv210/mach-goni.c b/arch/arm/mach-s5pv210/mach-goni.c
index c72b310..5704815 100644
--- a/arch/arm/mach-s5pv210/mach-goni.c
+++ b/arch/arm/mach-s5pv210/mach-goni.c
@@ -29,7 +29,6 @@
#include <linux/interrupt.h>
#include <linux/platform_data/s3c-hsotg.h>
-#include <asm/hardware/vic.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/setup.h>
@@ -972,10 +971,9 @@
/* Maintainers: Kyungmin Park <kyungmin.park@samsung.com> */
.atag_offset = 0x100,
.init_irq = s5pv210_init_irq,
- .handle_irq = vic_handle_irq,
.map_io = goni_map_io,
.init_machine = goni_machine_init,
- .timer = &s5p_timer,
+ .init_time = s5p_timer_init,
.reserve = &goni_reserve,
.restart = s5pv210_restart,
MACHINE_END
diff --git a/arch/arm/mach-s5pv210/mach-smdkc110.c b/arch/arm/mach-s5pv210/mach-smdkc110.c
index f1f3bd3..28bd024 100644
--- a/arch/arm/mach-s5pv210/mach-smdkc110.c
+++ b/arch/arm/mach-s5pv210/mach-smdkc110.c
@@ -15,7 +15,6 @@
#include <linux/i2c.h>
#include <linux/device.h>
-#include <asm/hardware/vic.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/setup.h>
@@ -152,10 +151,9 @@
/* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */
.atag_offset = 0x100,
.init_irq = s5pv210_init_irq,
- .handle_irq = vic_handle_irq,
.map_io = smdkc110_map_io,
.init_machine = smdkc110_machine_init,
- .timer = &s5p_timer,
+ .init_time = s5p_timer_init,
.restart = s5pv210_restart,
.reserve = &smdkc110_reserve,
MACHINE_END
diff --git a/arch/arm/mach-s5pv210/mach-smdkv210.c b/arch/arm/mach-s5pv210/mach-smdkv210.c
index 6bc8404..3c73f36 100644
--- a/arch/arm/mach-s5pv210/mach-smdkv210.c
+++ b/arch/arm/mach-s5pv210/mach-smdkv210.c
@@ -21,7 +21,6 @@
#include <linux/pwm_backlight.h>
#include <linux/platform_data/s3c-hsotg.h>
-#include <asm/hardware/vic.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/setup.h>
@@ -328,10 +327,9 @@
/* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */
.atag_offset = 0x100,
.init_irq = s5pv210_init_irq,
- .handle_irq = vic_handle_irq,
.map_io = smdkv210_map_io,
.init_machine = smdkv210_machine_init,
- .timer = &s5p_timer,
+ .init_time = s5p_timer_init,
.restart = s5pv210_restart,
.reserve = &smdkv210_reserve,
MACHINE_END
diff --git a/arch/arm/mach-s5pv210/mach-torbreck.c b/arch/arm/mach-s5pv210/mach-torbreck.c
index 18785cb..2d4c553 100644
--- a/arch/arm/mach-s5pv210/mach-torbreck.c
+++ b/arch/arm/mach-s5pv210/mach-torbreck.c
@@ -14,7 +14,6 @@
#include <linux/init.h>
#include <linux/serial_core.h>
-#include <asm/hardware/vic.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/setup.h>
@@ -129,9 +128,8 @@
/* Maintainer: Hyunchul Ko <ghcstop@gmail.com> */
.atag_offset = 0x100,
.init_irq = s5pv210_init_irq,
- .handle_irq = vic_handle_irq,
.map_io = torbreck_map_io,
.init_machine = torbreck_machine_init,
- .timer = &s5p_timer,
+ .init_time = s5p_timer_init,
.restart = s5pv210_restart,
MACHINE_END
diff --git a/arch/arm/mach-s5pv210/setup-usb-phy.c b/arch/arm/mach-s5pv210/setup-usb-phy.c
index be39cf4..356a090 100644
--- a/arch/arm/mach-s5pv210/setup-usb-phy.c
+++ b/arch/arm/mach-s5pv210/setup-usb-phy.c
@@ -12,12 +12,17 @@
#include <linux/err.h>
#include <linux/io.h>
#include <linux/platform_device.h>
+
#include <mach/map.h>
-#include <mach/regs-sys.h>
+
#include <plat/cpu.h>
#include <plat/regs-usb-hsotg-phy.h>
#include <plat/usb-phy.h>
+#define S5PV210_USB_PHY_CON (S3C_VA_SYS + 0xE80C)
+#define S5PV210_USB_PHY0_EN (1 << 0)
+#define S5PV210_USB_PHY1_EN (1 << 1)
+
static int s5pv210_usb_otgphy_init(struct platform_device *pdev)
{
struct clk *xusbxti;
diff --git a/arch/arm/mach-sa1100/assabet.c b/arch/arm/mach-sa1100/assabet.c
index 4424973..e838ba2 100644
--- a/arch/arm/mach-sa1100/assabet.c
+++ b/arch/arm/mach-sa1100/assabet.c
@@ -622,7 +622,7 @@
.map_io = assabet_map_io,
.nr_irqs = SA1100_NR_IRQS,
.init_irq = sa1100_init_irq,
- .timer = &sa1100_timer,
+ .init_time = sa1100_timer_init,
.init_machine = assabet_init,
.init_late = sa11x0_init_late,
#ifdef CONFIG_SA1111
diff --git a/arch/arm/mach-sa1100/badge4.c b/arch/arm/mach-sa1100/badge4.c
index b2dadf3..63361b6 100644
--- a/arch/arm/mach-sa1100/badge4.c
+++ b/arch/arm/mach-sa1100/badge4.c
@@ -336,7 +336,7 @@
.nr_irqs = SA1100_NR_IRQS,
.init_irq = sa1100_init_irq,
.init_late = sa11x0_init_late,
- .timer = &sa1100_timer,
+ .init_time = sa1100_timer_init,
#ifdef CONFIG_SA1111
.dma_zone_size = SZ_1M,
#endif
diff --git a/arch/arm/mach-sa1100/cerf.c b/arch/arm/mach-sa1100/cerf.c
index 304bca4..2d25ece 100644
--- a/arch/arm/mach-sa1100/cerf.c
+++ b/arch/arm/mach-sa1100/cerf.c
@@ -174,7 +174,7 @@
.map_io = cerf_map_io,
.nr_irqs = SA1100_NR_IRQS,
.init_irq = cerf_init_irq,
- .timer = &sa1100_timer,
+ .init_time = sa1100_timer_init,
.init_machine = cerf_init,
.init_late = sa11x0_init_late,
.restart = sa11x0_restart,
diff --git a/arch/arm/mach-sa1100/collie.c b/arch/arm/mach-sa1100/collie.c
index 45f424f..612a456 100644
--- a/arch/arm/mach-sa1100/collie.c
+++ b/arch/arm/mach-sa1100/collie.c
@@ -399,7 +399,7 @@
.map_io = collie_map_io,
.nr_irqs = SA1100_NR_IRQS,
.init_irq = sa1100_init_irq,
- .timer = &sa1100_timer,
+ .init_time = sa1100_timer_init,
.init_machine = collie_init,
.init_late = sa11x0_init_late,
.restart = sa11x0_restart,
diff --git a/arch/arm/mach-sa1100/generic.h b/arch/arm/mach-sa1100/generic.h
index a5b7c13..2abc6a1 100644
--- a/arch/arm/mach-sa1100/generic.h
+++ b/arch/arm/mach-sa1100/generic.h
@@ -4,9 +4,7 @@
* Author: Nicolas Pitre
*/
-struct sys_timer;
-
-extern struct sys_timer sa1100_timer;
+extern void sa1100_timer_init(void);
extern void __init sa1100_map_io(void);
extern void __init sa1100_init_irq(void);
extern void __init sa1100_init_gpio(void);
diff --git a/arch/arm/mach-sa1100/h3100.c b/arch/arm/mach-sa1100/h3100.c
index e1571ea..b8f2b15 100644
--- a/arch/arm/mach-sa1100/h3100.c
+++ b/arch/arm/mach-sa1100/h3100.c
@@ -108,7 +108,7 @@
.map_io = h3100_map_io,
.nr_irqs = SA1100_NR_IRQS,
.init_irq = sa1100_init_irq,
- .timer = &sa1100_timer,
+ .init_time = sa1100_timer_init,
.init_machine = h3100_mach_init,
.init_late = sa11x0_init_late,
.restart = sa11x0_restart,
diff --git a/arch/arm/mach-sa1100/h3600.c b/arch/arm/mach-sa1100/h3600.c
index ba7a290..b8dc5bd 100644
--- a/arch/arm/mach-sa1100/h3600.c
+++ b/arch/arm/mach-sa1100/h3600.c
@@ -158,7 +158,7 @@
.map_io = h3600_map_io,
.nr_irqs = SA1100_NR_IRQS,
.init_irq = sa1100_init_irq,
- .timer = &sa1100_timer,
+ .init_time = sa1100_timer_init,
.init_machine = h3600_mach_init,
.init_late = sa11x0_init_late,
.restart = sa11x0_restart,
diff --git a/arch/arm/mach-sa1100/hackkit.c b/arch/arm/mach-sa1100/hackkit.c
index d005939..643d5f2 100644
--- a/arch/arm/mach-sa1100/hackkit.c
+++ b/arch/arm/mach-sa1100/hackkit.c
@@ -229,7 +229,7 @@
.map_io = hackkit_map_io,
.nr_irqs = SA1100_NR_IRQS,
.init_irq = sa1100_init_irq,
- .timer = &sa1100_timer,
+ .init_time = sa1100_timer_init,
.init_machine = hackkit_init,
.init_late = sa11x0_init_late,
.restart = sa11x0_restart,
diff --git a/arch/arm/mach-sa1100/include/mach/uncompress.h b/arch/arm/mach-sa1100/include/mach/uncompress.h
index 5cf71da..73093dc 100644
--- a/arch/arm/mach-sa1100/include/mach/uncompress.h
+++ b/arch/arm/mach-sa1100/include/mach/uncompress.h
@@ -49,4 +49,3 @@
* Nothing to do for these
*/
#define arch_decomp_setup()
-#define arch_decomp_wdog()
diff --git a/arch/arm/mach-sa1100/jornada720.c b/arch/arm/mach-sa1100/jornada720.c
index 35cfc42..c0b1f5b 100644
--- a/arch/arm/mach-sa1100/jornada720.c
+++ b/arch/arm/mach-sa1100/jornada720.c
@@ -346,7 +346,7 @@
.map_io = jornada720_map_io,
.nr_irqs = SA1100_NR_IRQS,
.init_irq = sa1100_init_irq,
- .timer = &sa1100_timer,
+ .init_time = sa1100_timer_init,
.init_machine = jornada720_mach_init,
.init_late = sa11x0_init_late,
#ifdef CONFIG_SA1111
diff --git a/arch/arm/mach-sa1100/lart.c b/arch/arm/mach-sa1100/lart.c
index bca7e60..51b0eb5 100644
--- a/arch/arm/mach-sa1100/lart.c
+++ b/arch/arm/mach-sa1100/lart.c
@@ -171,6 +171,6 @@
.init_irq = sa1100_init_irq,
.init_machine = lart_init,
.init_late = sa11x0_init_late,
- .timer = &sa1100_timer,
+ .init_time = sa1100_timer_init,
.restart = sa11x0_restart,
MACHINE_END
diff --git a/arch/arm/mach-sa1100/nanoengine.c b/arch/arm/mach-sa1100/nanoengine.c
index 102e08f..f1cb378 100644
--- a/arch/arm/mach-sa1100/nanoengine.c
+++ b/arch/arm/mach-sa1100/nanoengine.c
@@ -110,7 +110,7 @@
.map_io = nanoengine_map_io,
.nr_irqs = SA1100_NR_IRQS,
.init_irq = sa1100_init_irq,
- .timer = &sa1100_timer,
+ .init_time = sa1100_timer_init,
.init_machine = nanoengine_init,
.init_late = sa11x0_init_late,
.restart = sa11x0_restart,
diff --git a/arch/arm/mach-sa1100/pleb.c b/arch/arm/mach-sa1100/pleb.c
index c51bb63..0912618 100644
--- a/arch/arm/mach-sa1100/pleb.c
+++ b/arch/arm/mach-sa1100/pleb.c
@@ -133,7 +133,7 @@
.map_io = pleb_map_io,
.nr_irqs = SA1100_NR_IRQS,
.init_irq = sa1100_init_irq,
- .timer = &sa1100_timer,
+ .init_time = sa1100_timer_init,
.init_machine = pleb_init,
.init_late = sa11x0_init_late,
.restart = sa11x0_restart,
diff --git a/arch/arm/mach-sa1100/shannon.c b/arch/arm/mach-sa1100/shannon.c
index 6460d25..c8866bc 100644
--- a/arch/arm/mach-sa1100/shannon.c
+++ b/arch/arm/mach-sa1100/shannon.c
@@ -102,7 +102,7 @@
.map_io = shannon_map_io,
.nr_irqs = SA1100_NR_IRQS,
.init_irq = sa1100_init_irq,
- .timer = &sa1100_timer,
+ .init_time = sa1100_timer_init,
.init_machine = shannon_init,
.init_late = sa11x0_init_late,
.restart = sa11x0_restart,
diff --git a/arch/arm/mach-sa1100/simpad.c b/arch/arm/mach-sa1100/simpad.c
index 6d65f65..bcbc945 100644
--- a/arch/arm/mach-sa1100/simpad.c
+++ b/arch/arm/mach-sa1100/simpad.c
@@ -396,6 +396,6 @@
.nr_irqs = SA1100_NR_IRQS,
.init_irq = sa1100_init_irq,
.init_late = sa11x0_init_late,
- .timer = &sa1100_timer,
+ .init_time = sa1100_timer_init,
.restart = sa11x0_restart,
MACHINE_END
diff --git a/arch/arm/mach-sa1100/time.c b/arch/arm/mach-sa1100/time.c
index 80702c9..a59a13a 100644
--- a/arch/arm/mach-sa1100/time.c
+++ b/arch/arm/mach-sa1100/time.c
@@ -69,46 +69,10 @@
}
}
-static struct clock_event_device ckevt_sa1100_osmr0 = {
- .name = "osmr0",
- .features = CLOCK_EVT_FEAT_ONESHOT,
- .rating = 200,
- .set_next_event = sa1100_osmr0_set_next_event,
- .set_mode = sa1100_osmr0_set_mode,
-};
-
-static struct irqaction sa1100_timer_irq = {
- .name = "ost0",
- .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
- .handler = sa1100_ost0_interrupt,
- .dev_id = &ckevt_sa1100_osmr0,
-};
-
-static void __init sa1100_timer_init(void)
-{
- writel_relaxed(0, OIER);
- writel_relaxed(OSSR_M0 | OSSR_M1 | OSSR_M2 | OSSR_M3, OSSR);
-
- setup_sched_clock(sa1100_read_sched_clock, 32, 3686400);
-
- clockevents_calc_mult_shift(&ckevt_sa1100_osmr0, 3686400, 4);
- ckevt_sa1100_osmr0.max_delta_ns =
- clockevent_delta2ns(0x7fffffff, &ckevt_sa1100_osmr0);
- ckevt_sa1100_osmr0.min_delta_ns =
- clockevent_delta2ns(MIN_OSCR_DELTA * 2, &ckevt_sa1100_osmr0) + 1;
- ckevt_sa1100_osmr0.cpumask = cpumask_of(0);
-
- setup_irq(IRQ_OST0, &sa1100_timer_irq);
-
- clocksource_mmio_init(OSCR, "oscr", CLOCK_TICK_RATE, 200, 32,
- clocksource_mmio_readl_up);
- clockevents_register_device(&ckevt_sa1100_osmr0);
-}
-
#ifdef CONFIG_PM
unsigned long osmr[4], oier;
-static void sa1100_timer_suspend(void)
+static void sa1100_timer_suspend(struct clock_event_device *cedev)
{
osmr[0] = readl_relaxed(OSMR0);
osmr[1] = readl_relaxed(OSMR1);
@@ -117,7 +81,7 @@
oier = readl_relaxed(OIER);
}
-static void sa1100_timer_resume(void)
+static void sa1100_timer_resume(struct clock_event_device *cedev)
{
writel_relaxed(0x0f, OSSR);
writel_relaxed(osmr[0], OSMR0);
@@ -136,8 +100,36 @@
#define sa1100_timer_resume NULL
#endif
-struct sys_timer sa1100_timer = {
- .init = sa1100_timer_init,
+static struct clock_event_device ckevt_sa1100_osmr0 = {
+ .name = "osmr0",
+ .features = CLOCK_EVT_FEAT_ONESHOT,
+ .rating = 200,
+ .set_next_event = sa1100_osmr0_set_next_event,
+ .set_mode = sa1100_osmr0_set_mode,
.suspend = sa1100_timer_suspend,
.resume = sa1100_timer_resume,
};
+
+static struct irqaction sa1100_timer_irq = {
+ .name = "ost0",
+ .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
+ .handler = sa1100_ost0_interrupt,
+ .dev_id = &ckevt_sa1100_osmr0,
+};
+
+void __init sa1100_timer_init(void)
+{
+ writel_relaxed(0, OIER);
+ writel_relaxed(OSSR_M0 | OSSR_M1 | OSSR_M2 | OSSR_M3, OSSR);
+
+ setup_sched_clock(sa1100_read_sched_clock, 32, 3686400);
+
+ ckevt_sa1100_osmr0.cpumask = cpumask_of(0);
+
+ setup_irq(IRQ_OST0, &sa1100_timer_irq);
+
+ clocksource_mmio_init(OSCR, "oscr", CLOCK_TICK_RATE, 200, 32,
+ clocksource_mmio_readl_up);
+ clockevents_config_and_register(&ckevt_sa1100_osmr0, 3686400,
+ MIN_OSCR_DELTA * 2, 0x7fffffff);
+}
diff --git a/arch/arm/mach-shark/core.c b/arch/arm/mach-shark/core.c
index 9ad2e97..b63dec8 100644
--- a/arch/arm/mach-shark/core.c
+++ b/arch/arm/mach-shark/core.c
@@ -128,10 +128,6 @@
setup_irq(IRQ_TIMER, &shark_timer_irq);
}
-static struct sys_timer shark_timer = {
- .init = shark_timer_init,
-};
-
static void shark_init_early(void)
{
disable_hlt();
@@ -142,7 +138,7 @@
.atag_offset = 0x3000,
.init_early = shark_init_early,
.init_irq = shark_init_irq,
- .timer = &shark_timer,
+ .init_time = shark_timer_init,
.dma_zone_size = SZ_4M,
.restart = shark_restart,
MACHINE_END
diff --git a/arch/arm/mach-shark/include/mach/uncompress.h b/arch/arm/mach-shark/include/mach/uncompress.h
index 22ccab4..a168435 100644
--- a/arch/arm/mach-shark/include/mach/uncompress.h
+++ b/arch/arm/mach-shark/include/mach/uncompress.h
@@ -48,4 +48,3 @@
* nothing to do
*/
#define arch_decomp_setup()
-#define arch_decomp_wdog()
diff --git a/arch/arm/mach-shmobile/board-ag5evm.c b/arch/arm/mach-shmobile/board-ag5evm.c
index 032d108..705bc63 100644
--- a/arch/arm/mach-shmobile/board-ag5evm.c
+++ b/arch/arm/mach-shmobile/board-ag5evm.c
@@ -40,6 +40,7 @@
#include <linux/mmc/sh_mobile_sdhi.h>
#include <linux/mfd/tmio.h>
#include <linux/sh_clk.h>
+#include <linux/irqchip/arm-gic.h>
#include <video/sh_mobile_lcdc.h>
#include <video/sh_mipi_dsi.h>
#include <sound/sh_fsi.h>
@@ -49,7 +50,6 @@
#include <mach/common.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
-#include <asm/hardware/gic.h>
#include <asm/hardware/cache-l2x0.h>
#include <asm/traps.h>
@@ -668,8 +668,7 @@
.init_early = sh73a0_add_early_devices,
.nr_irqs = NR_IRQS_LEGACY,
.init_irq = sh73a0_init_irq,
- .handle_irq = gic_handle_irq,
.init_machine = ag5evm_init,
.init_late = shmobile_init_late,
- .timer = &shmobile_timer,
+ .init_time = sh73a0_earlytimer_init,
MACHINE_END
diff --git a/arch/arm/mach-shmobile/board-ap4evb.c b/arch/arm/mach-shmobile/board-ap4evb.c
index 08294fa..2928cd6 100644
--- a/arch/arm/mach-shmobile/board-ap4evb.c
+++ b/arch/arm/mach-shmobile/board-ap4evb.c
@@ -1344,5 +1344,5 @@
.handle_irq = shmobile_handle_irq_intc,
.init_machine = ap4evb_init,
.init_late = sh7372_pm_init_late,
- .timer = &shmobile_timer,
+ .init_time = sh7372_earlytimer_init,
MACHINE_END
diff --git a/arch/arm/mach-shmobile/board-armadillo800eva.c b/arch/arm/mach-shmobile/board-armadillo800eva.c
index 0679ca6..6bcf3cb 100644
--- a/arch/arm/mach-shmobile/board-armadillo800eva.c
+++ b/arch/arm/mach-shmobile/board-armadillo800eva.c
@@ -1192,9 +1192,6 @@
static void __init eva_add_early_devices(void)
{
r8a7740_add_early_devices();
-
- /* override timer setup with board-specific code */
- shmobile_timer.init = eva_earlytimer_init;
}
#define RESCNT2 IOMEM(0xe6188020)
@@ -1216,7 +1213,7 @@
.handle_irq = shmobile_handle_irq_intc,
.init_machine = eva_init,
.init_late = shmobile_init_late,
- .timer = &shmobile_timer,
+ .init_time = eva_earlytimer_init,
.dt_compat = eva_boards_compat_dt,
.restart = eva_restart,
MACHINE_END
diff --git a/arch/arm/mach-shmobile/board-bonito.c b/arch/arm/mach-shmobile/board-bonito.c
index cb8c994..331b7ce 100644
--- a/arch/arm/mach-shmobile/board-bonito.c
+++ b/arch/arm/mach-shmobile/board-bonito.c
@@ -499,9 +499,6 @@
static void __init bonito_add_early_devices(void)
{
r8a7740_add_early_devices();
-
- /* override timer setup with board-specific code */
- shmobile_timer.init = bonito_earlytimer_init;
}
MACHINE_START(BONITO, "bonito")
@@ -511,5 +508,5 @@
.handle_irq = shmobile_handle_irq_intc,
.init_machine = bonito_init,
.init_late = shmobile_init_late,
- .timer = &shmobile_timer,
+ .init_time = bonito_earlytimer_init,
MACHINE_END
diff --git a/arch/arm/mach-shmobile/board-kota2.c b/arch/arm/mach-shmobile/board-kota2.c
index bf88f9a..d759a9c 100644
--- a/arch/arm/mach-shmobile/board-kota2.c
+++ b/arch/arm/mach-shmobile/board-kota2.c
@@ -35,6 +35,7 @@
#include <linux/input/sh_keysc.h>
#include <linux/gpio_keys.h>
#include <linux/leds.h>
+#include <linux/irqchip/arm-gic.h>
#include <linux/platform_data/leds-renesas-tpu.h>
#include <linux/mmc/host.h>
#include <linux/mmc/sh_mmcif.h>
@@ -47,7 +48,6 @@
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/time.h>
-#include <asm/hardware/gic.h>
#include <asm/hardware/cache-l2x0.h>
#include <asm/traps.h>
@@ -550,8 +550,7 @@
.init_early = sh73a0_add_early_devices,
.nr_irqs = NR_IRQS_LEGACY,
.init_irq = sh73a0_init_irq,
- .handle_irq = gic_handle_irq,
.init_machine = kota2_init,
.init_late = shmobile_init_late,
- .timer = &shmobile_timer,
+ .init_time = sh73a0_earlytimer_init,
MACHINE_END
diff --git a/arch/arm/mach-shmobile/board-kzm9d.c b/arch/arm/mach-shmobile/board-kzm9d.c
index b52bc0d..c254782 100644
--- a/arch/arm/mach-shmobile/board-kzm9d.c
+++ b/arch/arm/mach-shmobile/board-kzm9d.c
@@ -28,7 +28,6 @@
#include <mach/emev2.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
-#include <asm/hardware/gic.h>
/* Dummy supplies, where voltage doesn't matter */
static struct regulator_consumer_supply dummy_supplies[] = {
@@ -89,9 +88,8 @@
.init_early = emev2_add_early_devices,
.nr_irqs = NR_IRQS_LEGACY,
.init_irq = emev2_init_irq,
- .handle_irq = gic_handle_irq,
.init_machine = kzm9d_add_standard_devices,
.init_late = shmobile_init_late,
- .timer = &shmobile_timer,
+ .init_time = shmobile_timer_init,
.dt_compat = kzm9d_boards_compat_dt,
MACHINE_END
diff --git a/arch/arm/mach-shmobile/board-kzm9g.c b/arch/arm/mach-shmobile/board-kzm9g.c
index f41b71e..5394d80 100644
--- a/arch/arm/mach-shmobile/board-kzm9g.c
+++ b/arch/arm/mach-shmobile/board-kzm9g.c
@@ -25,6 +25,7 @@
#include <linux/i2c.h>
#include <linux/i2c/pcf857x.h>
#include <linux/input.h>
+#include <linux/irqchip/arm-gic.h>
#include <linux/mmc/host.h>
#include <linux/mmc/sh_mmcif.h>
#include <linux/mmc/sh_mobile_sdhi.h>
@@ -42,7 +43,6 @@
#include <mach/sh73a0.h>
#include <mach/common.h>
#include <asm/hardware/cache-l2x0.h>
-#include <asm/hardware/gic.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <video/sh_mobile_lcdc.h>
@@ -792,10 +792,9 @@
.init_early = sh73a0_add_early_devices,
.nr_irqs = NR_IRQS_LEGACY,
.init_irq = sh73a0_init_irq,
- .handle_irq = gic_handle_irq,
.init_machine = kzm_init,
.init_late = shmobile_init_late,
- .timer = &shmobile_timer,
+ .init_time = sh73a0_earlytimer_init,
.restart = kzm9g_restart,
.dt_compat = kzm9g_boards_compat_dt,
MACHINE_END
diff --git a/arch/arm/mach-shmobile/board-mackerel.c b/arch/arm/mach-shmobile/board-mackerel.c
index 3fd716d..e2fafca 100644
--- a/arch/arm/mach-shmobile/board-mackerel.c
+++ b/arch/arm/mach-shmobile/board-mackerel.c
@@ -1589,6 +1589,6 @@
.handle_irq = shmobile_handle_irq_intc,
.init_machine = mackerel_init,
.init_late = sh7372_pm_init_late,
- .timer = &shmobile_timer,
+ .init_time = sh7372_earlytimer_init,
.dt_compat = mackerel_boards_compat_dt,
MACHINE_END
diff --git a/arch/arm/mach-shmobile/board-marzen.c b/arch/arm/mach-shmobile/board-marzen.c
index 449f928..cdcb799 100644
--- a/arch/arm/mach-shmobile/board-marzen.c
+++ b/arch/arm/mach-shmobile/board-marzen.c
@@ -44,7 +44,6 @@
#include <mach/irqs.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
-#include <asm/hardware/gic.h>
#include <asm/traps.h>
/* Fixed 3.3V regulator to be used by SDHI0 */
@@ -382,8 +381,7 @@
.init_early = r8a7779_add_early_devices,
.nr_irqs = NR_IRQS_LEGACY,
.init_irq = r8a7779_init_irq,
- .handle_irq = gic_handle_irq,
.init_machine = marzen_init,
.init_late = marzen_init_late,
- .timer = &shmobile_timer,
+ .init_time = r8a7779_earlytimer_init,
MACHINE_END
diff --git a/arch/arm/mach-shmobile/include/mach/common.h b/arch/arm/mach-shmobile/include/mach/common.h
index dfeca79..a57439e 100644
--- a/arch/arm/mach-shmobile/include/mach/common.h
+++ b/arch/arm/mach-shmobile/include/mach/common.h
@@ -2,7 +2,7 @@
#define __ARCH_MACH_COMMON_H
extern void shmobile_earlytimer_init(void);
-extern struct sys_timer shmobile_timer;
+extern void shmobile_timer_init(void);
extern void shmobile_setup_delay(unsigned int max_cpu_core_mhz,
unsigned int mult, unsigned int div);
struct twd_local_timer;
@@ -20,6 +20,7 @@
extern void sh7372_init_irq(void);
extern void sh7372_map_io(void);
+extern void sh7372_earlytimer_init(void);
extern void sh7372_add_early_devices(void);
extern void sh7372_add_standard_devices(void);
extern void sh7372_clock_init(void);
@@ -32,6 +33,7 @@
extern void sh73a0_init_irq(void);
extern void sh73a0_map_io(void);
+extern void sh73a0_earlytimer_init(void);
extern void sh73a0_add_early_devices(void);
extern void sh73a0_add_standard_devices(void);
extern void sh73a0_clock_init(void);
@@ -50,6 +52,7 @@
extern void r8a7779_init_irq(void);
extern void r8a7779_map_io(void);
+extern void r8a7779_earlytimer_init(void);
extern void r8a7779_add_early_devices(void);
extern void r8a7779_add_standard_devices(void);
extern void r8a7779_clock_init(void);
diff --git a/arch/arm/mach-shmobile/include/mach/uncompress.h b/arch/arm/mach-shmobile/include/mach/uncompress.h
index 0bd7556..f1aee567 100644
--- a/arch/arm/mach-shmobile/include/mach/uncompress.h
+++ b/arch/arm/mach-shmobile/include/mach/uncompress.h
@@ -16,6 +16,4 @@
{
}
-#define arch_decomp_wdog()
-
#endif /* __ASM_MACH_UNCOMPRESS_H */
diff --git a/arch/arm/mach-shmobile/intc-r8a7779.c b/arch/arm/mach-shmobile/intc-r8a7779.c
index ef66f1a..8807c27 100644
--- a/arch/arm/mach-shmobile/intc-r8a7779.c
+++ b/arch/arm/mach-shmobile/intc-r8a7779.c
@@ -22,10 +22,10 @@
#include <linux/interrupt.h>
#include <linux/irq.h>
#include <linux/io.h>
+#include <linux/irqchip/arm-gic.h>
#include <mach/common.h>
#include <mach/intc.h>
#include <mach/r8a7779.h>
-#include <asm/hardware/gic.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
diff --git a/arch/arm/mach-shmobile/intc-sh73a0.c b/arch/arm/mach-shmobile/intc-sh73a0.c
index f0c5e51..9783699 100644
--- a/arch/arm/mach-shmobile/intc-sh73a0.c
+++ b/arch/arm/mach-shmobile/intc-sh73a0.c
@@ -23,10 +23,10 @@
#include <linux/irq.h>
#include <linux/io.h>
#include <linux/sh_intc.h>
+#include <linux/irqchip/arm-gic.h>
#include <mach/intc.h>
#include <mach/irqs.h>
#include <mach/sh73a0.h>
-#include <asm/hardware/gic.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
diff --git a/arch/arm/mach-shmobile/platsmp.c b/arch/arm/mach-shmobile/platsmp.c
index ed8d235..1f958d7 100644
--- a/arch/arm/mach-shmobile/platsmp.c
+++ b/arch/arm/mach-shmobile/platsmp.c
@@ -12,7 +12,6 @@
*/
#include <linux/init.h>
#include <linux/smp.h>
-#include <asm/hardware/gic.h>
void __init shmobile_smp_init_cpus(unsigned int ncores)
{
@@ -26,6 +25,4 @@
for (i = 0; i < ncores; i++)
set_cpu_possible(i, true);
-
- set_smp_cross_call(gic_raise_softirq);
}
diff --git a/arch/arm/mach-shmobile/setup-emev2.c b/arch/arm/mach-shmobile/setup-emev2.c
index a47beeb..47662a5 100644
--- a/arch/arm/mach-shmobile/setup-emev2.c
+++ b/arch/arm/mach-shmobile/setup-emev2.c
@@ -20,13 +20,14 @@
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
+#include <linux/irqchip.h>
#include <linux/platform_device.h>
#include <linux/platform_data/gpio-em.h>
#include <linux/of_platform.h>
#include <linux/delay.h>
#include <linux/input.h>
#include <linux/io.h>
-#include <linux/of_irq.h>
+#include <linux/irqchip/arm-gic.h>
#include <mach/hardware.h>
#include <mach/common.h>
#include <mach/emev2.h>
@@ -35,7 +36,6 @@
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/mach/time.h>
-#include <asm/hardware/gic.h>
static struct map_desc emev2_io_desc[] __initdata = {
#ifdef CONFIG_SMP
@@ -445,29 +445,18 @@
emev2_auxdata_lookup, NULL);
}
-static const struct of_device_id emev2_dt_irq_match[] = {
- { .compatible = "arm,cortex-a9-gic", .data = gic_of_init, },
- {},
-};
-
static const char *emev2_boards_compat_dt[] __initdata = {
"renesas,emev2",
NULL,
};
-void __init emev2_init_irq_dt(void)
-{
- of_irq_init(emev2_dt_irq_match);
-}
-
DT_MACHINE_START(EMEV2_DT, "Generic Emma Mobile EV2 (Flattened Device Tree)")
.smp = smp_ops(emev2_smp_ops),
.init_early = emev2_init_delay,
.nr_irqs = NR_IRQS_LEGACY,
- .init_irq = emev2_init_irq_dt,
- .handle_irq = gic_handle_irq,
+ .init_irq = irqchip_init,
.init_machine = emev2_add_standard_devices_dt,
- .timer = &shmobile_timer,
+ .init_time = shmobile_timer_init,
.dt_compat = emev2_boards_compat_dt,
MACHINE_END
diff --git a/arch/arm/mach-shmobile/setup-r8a7740.c b/arch/arm/mach-shmobile/setup-r8a7740.c
index 0952224..03c69f9 100644
--- a/arch/arm/mach-shmobile/setup-r8a7740.c
+++ b/arch/arm/mach-shmobile/setup-r8a7740.c
@@ -705,12 +705,6 @@
rmobile_add_device_to_domain("A3SP", &i2c1_device);
}
-static void __init r8a7740_earlytimer_init(void)
-{
- r8a7740_clock_init(0);
- shmobile_earlytimer_init();
-}
-
void __init r8a7740_add_early_devices(void)
{
early_platform_add_devices(r8a7740_early_devices,
@@ -718,9 +712,6 @@
/* setup early console here as well */
shmobile_setup_console();
-
- /* override timer setup with soc-specific code */
- shmobile_timer.init = r8a7740_earlytimer_init;
}
#ifdef CONFIG_USE_OF
@@ -763,7 +754,7 @@
.init_irq = r8a7740_init_irq,
.handle_irq = shmobile_handle_irq_intc,
.init_machine = r8a7740_add_standard_devices_dt,
- .timer = &shmobile_timer,
+ .init_time = shmobile_timer_init,
.dt_compat = r8a7740_boards_compat_dt,
MACHINE_END
diff --git a/arch/arm/mach-shmobile/setup-r8a7779.c b/arch/arm/mach-shmobile/setup-r8a7779.c
index 7a1ad4f..a181ced 100644
--- a/arch/arm/mach-shmobile/setup-r8a7779.c
+++ b/arch/arm/mach-shmobile/setup-r8a7779.c
@@ -339,7 +339,7 @@
/* do nothing for !CONFIG_SMP or !CONFIG_HAVE_TWD */
void __init __weak r8a7779_register_twd(void) { }
-static void __init r8a7779_earlytimer_init(void)
+void __init r8a7779_earlytimer_init(void)
{
r8a7779_clock_init();
shmobile_earlytimer_init();
@@ -366,7 +366,4 @@
* As a final step pass earlyprint=sh-sci.2,115200 on the kernel
* command line in case of the marzen board.
*/
-
- /* override timer setup with soc-specific code */
- shmobile_timer.init = r8a7779_earlytimer_init;
}
diff --git a/arch/arm/mach-shmobile/setup-sh7372.c b/arch/arm/mach-shmobile/setup-sh7372.c
index c917882..191ae72 100644
--- a/arch/arm/mach-shmobile/setup-sh7372.c
+++ b/arch/arm/mach-shmobile/setup-sh7372.c
@@ -1054,7 +1054,7 @@
ARRAY_SIZE(domain_devices));
}
-static void __init sh7372_earlytimer_init(void)
+void __init sh7372_earlytimer_init(void)
{
sh7372_clock_init();
shmobile_earlytimer_init();
@@ -1067,9 +1067,6 @@
/* setup early console here as well */
shmobile_setup_console();
-
- /* override timer setup with soc-specific code */
- shmobile_timer.init = sh7372_earlytimer_init;
}
#ifdef CONFIG_USE_OF
@@ -1113,7 +1110,7 @@
.init_irq = sh7372_init_irq,
.handle_irq = shmobile_handle_irq_intc,
.init_machine = sh7372_add_standard_devices_dt,
- .timer = &shmobile_timer,
+ .init_time = shmobile_timer_init,
.dt_compat = sh7372_boards_compat_dt,
MACHINE_END
diff --git a/arch/arm/mach-shmobile/setup-sh73a0.c b/arch/arm/mach-shmobile/setup-sh73a0.c
index db99a4a..8c2d642 100644
--- a/arch/arm/mach-shmobile/setup-sh73a0.c
+++ b/arch/arm/mach-shmobile/setup-sh73a0.c
@@ -796,7 +796,7 @@
/* do nothing for !CONFIG_SMP or !CONFIG_HAVE_TWD */
void __init __weak sh73a0_register_twd(void) { }
-static void __init sh73a0_earlytimer_init(void)
+void __init sh73a0_earlytimer_init(void)
{
sh73a0_clock_init();
shmobile_earlytimer_init();
@@ -810,7 +810,4 @@
/* setup early console here as well */
shmobile_setup_console();
-
- /* override timer setup with soc-specific code */
- shmobile_timer.init = sh73a0_earlytimer_init;
}
diff --git a/arch/arm/mach-shmobile/smp-emev2.c b/arch/arm/mach-shmobile/smp-emev2.c
index f674562..953eb1f 100644
--- a/arch/arm/mach-shmobile/smp-emev2.c
+++ b/arch/arm/mach-shmobile/smp-emev2.c
@@ -23,11 +23,11 @@
#include <linux/spinlock.h>
#include <linux/io.h>
#include <linux/delay.h>
+#include <linux/irqchip/arm-gic.h>
#include <mach/common.h>
#include <mach/emev2.h>
#include <asm/smp_plat.h>
#include <asm/smp_scu.h>
-#include <asm/hardware/gic.h>
#include <asm/cacheflush.h>
#define EMEV2_SCU_BASE 0x1e000000
@@ -100,7 +100,7 @@
/* Tell ROM loader about our vector (in headsmp.S) */
emev2_set_boot_vector(__pa(shmobile_secondary_vector));
- gic_raise_softirq(cpumask_of(cpu), 0);
+ arch_send_wakeup_ipi_mask(cpumask_of(cpu));
return 0;
}
diff --git a/arch/arm/mach-shmobile/smp-r8a7779.c b/arch/arm/mach-shmobile/smp-r8a7779.c
index 2ce6af9..3a4acf2 100644
--- a/arch/arm/mach-shmobile/smp-r8a7779.c
+++ b/arch/arm/mach-shmobile/smp-r8a7779.c
@@ -23,12 +23,12 @@
#include <linux/spinlock.h>
#include <linux/io.h>
#include <linux/delay.h>
+#include <linux/irqchip/arm-gic.h>
#include <mach/common.h>
#include <mach/r8a7779.h>
#include <asm/smp_plat.h>
#include <asm/smp_scu.h>
#include <asm/smp_twd.h>
-#include <asm/hardware/gic.h>
#define AVECR IOMEM(0xfe700040)
diff --git a/arch/arm/mach-shmobile/smp-sh73a0.c b/arch/arm/mach-shmobile/smp-sh73a0.c
index 624f00f..5c5bcb5 100644
--- a/arch/arm/mach-shmobile/smp-sh73a0.c
+++ b/arch/arm/mach-shmobile/smp-sh73a0.c
@@ -23,12 +23,12 @@
#include <linux/spinlock.h>
#include <linux/io.h>
#include <linux/delay.h>
+#include <linux/irqchip/arm-gic.h>
#include <mach/common.h>
#include <asm/smp_plat.h>
#include <mach/sh73a0.h>
#include <asm/smp_scu.h>
#include <asm/smp_twd.h>
-#include <asm/hardware/gic.h>
#define WUPCR IOMEM(0xe6151010)
#define SRESCR IOMEM(0xe6151018)
diff --git a/arch/arm/mach-shmobile/timer.c b/arch/arm/mach-shmobile/timer.c
index a689197..fdbe54a 100644
--- a/arch/arm/mach-shmobile/timer.c
+++ b/arch/arm/mach-shmobile/timer.c
@@ -60,10 +60,6 @@
late_time_init = shmobile_late_time_init;
}
-static void __init shmobile_timer_init(void)
+void __init shmobile_timer_init(void)
{
}
-
-struct sys_timer shmobile_timer = {
- .init = shmobile_timer_init,
-};
diff --git a/arch/arm/mach-socfpga/platsmp.c b/arch/arm/mach-socfpga/platsmp.c
index 68dd1b6..4e9e69d 100644
--- a/arch/arm/mach-socfpga/platsmp.c
+++ b/arch/arm/mach-socfpga/platsmp.c
@@ -22,9 +22,9 @@
#include <linux/io.h>
#include <linux/of.h>
#include <linux/of_address.h>
+#include <linux/irqchip/arm-gic.h>
#include <asm/cacheflush.h>
-#include <asm/hardware/gic.h>
#include <asm/smp_scu.h>
#include <asm/smp_plat.h>
@@ -83,8 +83,6 @@
for (i = 0; i < ncores; i++)
set_cpu_possible(i, true);
-
- set_smp_cross_call(gic_raise_softirq);
}
static void __init socfpga_smp_prepare_cpus(unsigned int max_cpus)
diff --git a/arch/arm/mach-socfpga/socfpga.c b/arch/arm/mach-socfpga/socfpga.c
index 6732924..27d6846 100644
--- a/arch/arm/mach-socfpga/socfpga.c
+++ b/arch/arm/mach-socfpga/socfpga.c
@@ -15,12 +15,12 @@
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include <linux/dw_apb_timer.h>
+#include <linux/irqchip.h>
#include <linux/of_address.h>
#include <linux/of_irq.h>
#include <linux/of_platform.h>
#include <asm/hardware/cache-l2x0.h>
-#include <asm/hardware/gic.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
@@ -62,11 +62,6 @@
early_printk("Early printk initialized\n");
}
-const static struct of_device_id irq_match[] = {
- { .compatible = "arm,cortex-a9-gic", .data = gic_of_init, },
- {}
-};
-
void __init socfpga_sysmgr_init(void)
{
struct device_node *np;
@@ -78,9 +73,9 @@
rst_manager_base_addr = of_iomap(np, 0);
}
-static void __init gic_init_irq(void)
+static void __init socfpga_init_irq(void)
{
- of_irq_init(irq_match);
+ irqchip_init();
socfpga_sysmgr_init();
}
@@ -105,9 +100,8 @@
DT_MACHINE_START(SOCFPGA, "Altera SOCFPGA")
.smp = smp_ops(socfpga_smp_ops),
.map_io = socfpga_map_io,
- .init_irq = gic_init_irq,
- .handle_irq = gic_handle_irq,
- .timer = &dw_apb_timer,
+ .init_irq = socfpga_init_irq,
+ .init_time = dw_apb_timer_init,
.init_machine = socfpga_cyclone5_init,
.restart = socfpga_cyclone5_restart,
.dt_compat = altera_dt_match,
diff --git a/arch/arm/mach-spear13xx/include/mach/generic.h b/arch/arm/mach-spear13xx/include/mach/generic.h
index c33f4d9..633e678 100644
--- a/arch/arm/mach-spear13xx/include/mach/generic.h
+++ b/arch/arm/mach-spear13xx/include/mach/generic.h
@@ -18,7 +18,7 @@
#include <asm/mach/time.h>
/* Add spear13xx structure declarations here */
-extern struct sys_timer spear13xx_timer;
+extern void spear13xx_timer_init(void);
extern struct pl022_ssp_controller pl022_plat_data;
extern struct dw_dma_platform_data dmac_plat_data;
extern struct dw_dma_slave cf_dma_priv;
@@ -28,7 +28,6 @@
/* Add spear13xx family function declarations here */
void __init spear_setup_of_timer(void);
void __init spear13xx_map_io(void);
-void __init spear13xx_dt_init_irq(void);
void __init spear13xx_l2x0_init(void);
bool dw_dma_filter(struct dma_chan *chan, void *slave);
void spear_restart(char, const char *);
diff --git a/arch/arm/mach-spear13xx/platsmp.c b/arch/arm/mach-spear13xx/platsmp.c
index 2eaa3fa..af4ade6 100644
--- a/arch/arm/mach-spear13xx/platsmp.c
+++ b/arch/arm/mach-spear13xx/platsmp.c
@@ -15,8 +15,8 @@
#include <linux/jiffies.h>
#include <linux/io.h>
#include <linux/smp.h>
+#include <linux/irqchip/arm-gic.h>
#include <asm/cacheflush.h>
-#include <asm/hardware/gic.h>
#include <asm/smp_scu.h>
#include <mach/spear.h>
#include <mach/generic.h>
@@ -104,8 +104,6 @@
for (i = 0; i < ncores; i++)
set_cpu_possible(i, true);
-
- set_smp_cross_call(gic_raise_softirq);
}
static void __init spear13xx_smp_prepare_cpus(unsigned int max_cpus)
diff --git a/arch/arm/mach-spear13xx/spear1310.c b/arch/arm/mach-spear13xx/spear1310.c
index 02f4724..56214d1 100644
--- a/arch/arm/mach-spear13xx/spear1310.c
+++ b/arch/arm/mach-spear13xx/spear1310.c
@@ -14,9 +14,9 @@
#define pr_fmt(fmt) "SPEAr1310: " fmt
#include <linux/amba/pl022.h>
+#include <linux/irqchip.h>
#include <linux/of_platform.h>
#include <linux/pata_arasan_cf_data.h>
-#include <asm/hardware/gic.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <mach/generic.h>
@@ -90,9 +90,8 @@
DT_MACHINE_START(SPEAR1310_DT, "ST SPEAr1310 SoC with Flattened Device Tree")
.smp = smp_ops(spear13xx_smp_ops),
.map_io = spear1310_map_io,
- .init_irq = spear13xx_dt_init_irq,
- .handle_irq = gic_handle_irq,
- .timer = &spear13xx_timer,
+ .init_irq = irqchip_init,
+ .init_time = spear13xx_timer_init,
.init_machine = spear1310_dt_init,
.restart = spear_restart,
.dt_compat = spear1310_dt_board_compat,
diff --git a/arch/arm/mach-spear13xx/spear1340.c b/arch/arm/mach-spear13xx/spear1340.c
index 081014f..9a28beb 100644
--- a/arch/arm/mach-spear13xx/spear1340.c
+++ b/arch/arm/mach-spear13xx/spear1340.c
@@ -18,7 +18,7 @@
#include <linux/delay.h>
#include <linux/dw_dmac.h>
#include <linux/of_platform.h>
-#include <asm/hardware/gic.h>
+#include <linux/irqchip.h>
#include <asm/mach/arch.h>
#include <mach/dma.h>
#include <mach/generic.h>
@@ -184,9 +184,8 @@
DT_MACHINE_START(SPEAR1340_DT, "ST SPEAr1340 SoC with Flattened Device Tree")
.smp = smp_ops(spear13xx_smp_ops),
.map_io = spear13xx_map_io,
- .init_irq = spear13xx_dt_init_irq,
- .handle_irq = gic_handle_irq,
- .timer = &spear13xx_timer,
+ .init_irq = irqchip_init,
+ .init_time = spear13xx_timer_init,
.init_machine = spear1340_dt_init,
.restart = spear_restart,
.dt_compat = spear1340_dt_board_compat,
diff --git a/arch/arm/mach-spear13xx/spear13xx.c b/arch/arm/mach-spear13xx/spear13xx.c
index c4af775..c7d2b4a 100644
--- a/arch/arm/mach-spear13xx/spear13xx.c
+++ b/arch/arm/mach-spear13xx/spear13xx.c
@@ -17,9 +17,8 @@
#include <linux/clk.h>
#include <linux/dw_dmac.h>
#include <linux/err.h>
-#include <linux/of_irq.h>
+#include <linux/of.h>
#include <asm/hardware/cache-l2x0.h>
-#include <asm/hardware/gic.h>
#include <asm/mach/map.h>
#include <asm/smp_twd.h>
#include <mach/dma.h>
@@ -153,7 +152,7 @@
pr_err("%s: Unknown machine\n", __func__);
}
-static void __init spear13xx_timer_init(void)
+void __init spear13xx_timer_init(void)
{
char pclk_name[] = "osc_24m_clk";
struct clk *gpt_clk, *pclk;
@@ -182,17 +181,3 @@
spear_setup_of_timer();
twd_local_timer_of_register();
}
-
-struct sys_timer spear13xx_timer = {
- .init = spear13xx_timer_init,
-};
-
-static const struct of_device_id gic_of_match[] __initconst = {
- { .compatible = "arm,cortex-a9-gic", .data = gic_of_init },
- { /* Sentinel */ }
-};
-
-void __init spear13xx_dt_init_irq(void)
-{
- of_irq_init(gic_of_match);
-}
diff --git a/arch/arm/mach-spear3xx/include/mach/generic.h b/arch/arm/mach-spear3xx/include/mach/generic.h
index ce19113..df31079 100644
--- a/arch/arm/mach-spear3xx/include/mach/generic.h
+++ b/arch/arm/mach-spear3xx/include/mach/generic.h
@@ -22,7 +22,7 @@
#include <asm/mach/map.h>
/* Add spear3xx family device structure declarations here */
-extern struct sys_timer spear3xx_timer;
+extern void spear3xx_timer_init(void);
extern struct pl022_ssp_controller pl022_plat_data;
extern struct pl08x_platform_data pl080_plat_data;
@@ -30,7 +30,6 @@
void __init spear_setup_of_timer(void);
void __init spear3xx_clk_init(void);
void __init spear3xx_map_io(void);
-void __init spear3xx_dt_init_irq(void);
void spear_restart(char, const char *);
diff --git a/arch/arm/mach-spear3xx/spear300.c b/arch/arm/mach-spear3xx/spear300.c
index a69cbfd..bbc9b7e 100644
--- a/arch/arm/mach-spear3xx/spear300.c
+++ b/arch/arm/mach-spear3xx/spear300.c
@@ -14,8 +14,8 @@
#define pr_fmt(fmt) "SPEAr300: " fmt
#include <linux/amba/pl08x.h>
+#include <linux/irqchip.h>
#include <linux/of_platform.h>
-#include <asm/hardware/vic.h>
#include <asm/mach/arch.h>
#include <mach/generic.h>
#include <mach/spear.h>
@@ -212,9 +212,8 @@
DT_MACHINE_START(SPEAR300_DT, "ST SPEAr300 SoC with Flattened Device Tree")
.map_io = spear300_map_io,
- .init_irq = spear3xx_dt_init_irq,
- .handle_irq = vic_handle_irq,
- .timer = &spear3xx_timer,
+ .init_irq = irqchip_init,
+ .init_time = spear3xx_timer_init,
.init_machine = spear300_dt_init,
.restart = spear_restart,
.dt_compat = spear300_dt_board_compat,
diff --git a/arch/arm/mach-spear3xx/spear310.c b/arch/arm/mach-spear3xx/spear310.c
index b963ebb..c13a434 100644
--- a/arch/arm/mach-spear3xx/spear310.c
+++ b/arch/arm/mach-spear3xx/spear310.c
@@ -15,8 +15,8 @@
#include <linux/amba/pl08x.h>
#include <linux/amba/serial.h>
+#include <linux/irqchip.h>
#include <linux/of_platform.h>
-#include <asm/hardware/vic.h>
#include <asm/mach/arch.h>
#include <mach/generic.h>
#include <mach/spear.h>
@@ -254,9 +254,8 @@
DT_MACHINE_START(SPEAR310_DT, "ST SPEAr310 SoC with Flattened Device Tree")
.map_io = spear310_map_io,
- .init_irq = spear3xx_dt_init_irq,
- .handle_irq = vic_handle_irq,
- .timer = &spear3xx_timer,
+ .init_irq = irqchip_init,
+ .init_time = spear3xx_timer_init,
.init_machine = spear310_dt_init,
.restart = spear_restart,
.dt_compat = spear310_dt_board_compat,
diff --git a/arch/arm/mach-spear3xx/spear320.c b/arch/arm/mach-spear3xx/spear320.c
index 66e3a0c..e1c7707 100644
--- a/arch/arm/mach-spear3xx/spear320.c
+++ b/arch/arm/mach-spear3xx/spear320.c
@@ -16,8 +16,8 @@
#include <linux/amba/pl022.h>
#include <linux/amba/pl08x.h>
#include <linux/amba/serial.h>
+#include <linux/irqchip.h>
#include <linux/of_platform.h>
-#include <asm/hardware/vic.h>
#include <asm/mach/arch.h>
#include <mach/generic.h>
#include <mach/spear.h>
@@ -268,9 +268,8 @@
DT_MACHINE_START(SPEAR320_DT, "ST SPEAr320 SoC with Flattened Device Tree")
.map_io = spear320_map_io,
- .init_irq = spear3xx_dt_init_irq,
- .handle_irq = vic_handle_irq,
- .timer = &spear3xx_timer,
+ .init_irq = irqchip_init,
+ .init_time = spear3xx_timer_init,
.init_machine = spear320_dt_init,
.restart = spear_restart,
.dt_compat = spear320_dt_board_compat,
diff --git a/arch/arm/mach-spear3xx/spear3xx.c b/arch/arm/mach-spear3xx/spear3xx.c
index 38fe95d..b2ba516 100644
--- a/arch/arm/mach-spear3xx/spear3xx.c
+++ b/arch/arm/mach-spear3xx/spear3xx.c
@@ -15,11 +15,8 @@
#include <linux/amba/pl022.h>
#include <linux/amba/pl08x.h>
-#include <linux/irqchip/spear-shirq.h>
-#include <linux/of_irq.h>
#include <linux/io.h>
#include <asm/hardware/pl080.h>
-#include <asm/hardware/vic.h>
#include <plat/pl080.h>
#include <mach/generic.h>
#include <mach/spear.h>
@@ -87,7 +84,7 @@
iotable_init(spear3xx_io_desc, ARRAY_SIZE(spear3xx_io_desc));
}
-static void __init spear3xx_timer_init(void)
+void __init spear3xx_timer_init(void)
{
char pclk_name[] = "pll3_clk";
struct clk *gpt_clk, *pclk;
@@ -115,20 +112,3 @@
spear_setup_of_timer();
}
-
-struct sys_timer spear3xx_timer = {
- .init = spear3xx_timer_init,
-};
-
-static const struct of_device_id vic_of_match[] __initconst = {
- { .compatible = "arm,pl190-vic", .data = vic_of_init, },
- { .compatible = "st,spear300-shirq", .data = spear300_shirq_of_init, },
- { .compatible = "st,spear310-shirq", .data = spear310_shirq_of_init, },
- { .compatible = "st,spear320-shirq", .data = spear320_shirq_of_init, },
- { /* Sentinel */ }
-};
-
-void __init spear3xx_dt_init_irq(void)
-{
- of_irq_init(vic_of_match);
-}
diff --git a/arch/arm/mach-spear6xx/spear6xx.c b/arch/arm/mach-spear6xx/spear6xx.c
index 5a5a52d..b8bd33c 100644
--- a/arch/arm/mach-spear6xx/spear6xx.c
+++ b/arch/arm/mach-spear6xx/spear6xx.c
@@ -16,12 +16,11 @@
#include <linux/amba/pl08x.h>
#include <linux/clk.h>
#include <linux/err.h>
+#include <linux/irqchip.h>
#include <linux/of.h>
#include <linux/of_address.h>
-#include <linux/of_irq.h>
#include <linux/of_platform.h>
#include <asm/hardware/pl080.h>
-#include <asm/hardware/vic.h>
#include <asm/mach/arch.h>
#include <asm/mach/time.h>
#include <asm/mach/map.h>
@@ -374,7 +373,7 @@
iotable_init(spear6xx_io_desc, ARRAY_SIZE(spear6xx_io_desc));
}
-static void __init spear6xx_timer_init(void)
+void __init spear6xx_timer_init(void)
{
char pclk_name[] = "pll3_clk";
struct clk *gpt_clk, *pclk;
@@ -403,10 +402,6 @@
spear_setup_of_timer();
}
-struct sys_timer spear6xx_timer = {
- .init = spear6xx_timer_init,
-};
-
/* Add auxdata to pass platform data */
struct of_dev_auxdata spear6xx_auxdata_lookup[] __initdata = {
OF_DEV_AUXDATA("arm,pl080", SPEAR6XX_ICM3_DMA_BASE, NULL,
@@ -425,21 +420,10 @@
NULL
};
-static const struct of_device_id vic_of_match[] __initconst = {
- { .compatible = "arm,pl190-vic", .data = vic_of_init, },
- { /* Sentinel */ }
-};
-
-static void __init spear6xx_dt_init_irq(void)
-{
- of_irq_init(vic_of_match);
-}
-
DT_MACHINE_START(SPEAR600_DT, "ST SPEAr600 (Flattened Device Tree)")
.map_io = spear6xx_map_io,
- .init_irq = spear6xx_dt_init_irq,
- .handle_irq = vic_handle_irq,
- .timer = &spear6xx_timer,
+ .init_irq = irqchip_init,
+ .init_time = spear6xx_timer_init,
.init_machine = spear600_dt_init,
.restart = spear_restart,
.dt_compat = spear600_dt_board_compat,
diff --git a/arch/arm/mach-sunxi/sunxi.c b/arch/arm/mach-sunxi/sunxi.c
index 1dc8a92..23afb73 100644
--- a/arch/arm/mach-sunxi/sunxi.c
+++ b/arch/arm/mach-sunxi/sunxi.c
@@ -21,15 +21,16 @@
#include <linux/irqchip/sunxi.h>
-#include <asm/hardware/vic.h>
-
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include "sunxi.h"
#define WATCHDOG_CTRL_REG 0x00
+#define WATCHDOG_CTRL_RESTART (1 << 0)
#define WATCHDOG_MODE_REG 0x04
+#define WATCHDOG_MODE_ENABLE (1 << 0)
+#define WATCHDOG_MODE_RESET_ENABLE (1 << 1)
static void __iomem *wdt_base;
@@ -50,11 +51,19 @@
return;
/* Enable timer and set reset bit in the watchdog */
- writel(3, wdt_base + WATCHDOG_MODE_REG);
- writel(0xa57 << 1 | 1, wdt_base + WATCHDOG_CTRL_REG);
- while(1) {
+ writel(WATCHDOG_MODE_ENABLE | WATCHDOG_MODE_RESET_ENABLE,
+ wdt_base + WATCHDOG_MODE_REG);
+
+ /*
+ * Restart the watchdog. The default (and lowest) interval
+ * value for the watchdog is 0.5s.
+ */
+ writel(WATCHDOG_CTRL_RESTART, wdt_base + WATCHDOG_CTRL_REG);
+
+ while (1) {
mdelay(5);
- writel(3, wdt_base + WATCHDOG_MODE_REG);
+ writel(WATCHDOG_MODE_ENABLE | WATCHDOG_MODE_RESET_ENABLE,
+ wdt_base + WATCHDOG_MODE_REG);
}
}
@@ -91,6 +100,6 @@
.init_irq = sunxi_init_irq,
.handle_irq = sunxi_handle_irq,
.restart = sunxi_restart,
- .timer = &sunxi_timer,
+ .init_time = &sunxi_timer_init,
.dt_compat = sunxi_board_dt_compat,
MACHINE_END
diff --git a/arch/arm/mach-tegra/Kconfig b/arch/arm/mach-tegra/Kconfig
index b442f15..1ec7f80 100644
--- a/arch/arm/mach-tegra/Kconfig
+++ b/arch/arm/mach-tegra/Kconfig
@@ -6,9 +6,9 @@
bool "Enable support for Tegra20 family"
select ARCH_REQUIRE_GPIOLIB
select ARM_ERRATA_720789
- select ARM_ERRATA_742230
+ select ARM_ERRATA_742230 if SMP
select ARM_ERRATA_751472
- select ARM_ERRATA_754327
+ select ARM_ERRATA_754327 if SMP
select ARM_ERRATA_764369 if SMP
select ARM_GIC
select CPU_FREQ_TABLE if CPU_FREQ
diff --git a/arch/arm/mach-tegra/Makefile b/arch/arm/mach-tegra/Makefile
index 0979e8b..f052096 100644
--- a/arch/arm/mach-tegra/Makefile
+++ b/arch/arm/mach-tegra/Makefile
@@ -2,15 +2,16 @@
obj-y += io.o
obj-y += irq.o
obj-y += clock.o
-obj-y += timer.o
obj-y += fuse.o
obj-y += pmc.o
obj-y += flowctrl.o
obj-y += powergate.o
obj-y += apbio.o
obj-y += pm.o
+obj-y += reset.o
+obj-y += reset-handler.o
+obj-y += sleep.o
obj-$(CONFIG_CPU_IDLE) += cpuidle.o
-obj-$(CONFIG_CPU_IDLE) += sleep.o
obj-$(CONFIG_ARCH_TEGRA_2x_SOC) += tegra20_clocks.o
obj-$(CONFIG_ARCH_TEGRA_2x_SOC) += tegra20_clocks_data.o
obj-$(CONFIG_ARCH_TEGRA_2x_SOC) += tegra20_speedo.o
@@ -27,7 +28,6 @@
obj-$(CONFIG_ARCH_TEGRA_3x_SOC) += cpuidle-tegra30.o
endif
obj-$(CONFIG_SMP) += platsmp.o headsmp.o
-obj-$(CONFIG_SMP) += reset.o
obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o
obj-$(CONFIG_CPU_FREQ) += cpu-tegra.o
obj-$(CONFIG_TEGRA_PCI) += pcie.o
diff --git a/arch/arm/mach-tegra/apbio.c b/arch/arm/mach-tegra/apbio.c
index d091675..d7aa52e 100644
--- a/arch/arm/mach-tegra/apbio.c
+++ b/arch/arm/mach-tegra/apbio.c
@@ -38,7 +38,7 @@
static struct dma_chan *tegra_apb_dma_chan;
static struct dma_slave_config dma_sconfig;
-bool tegra_apb_dma_init(void)
+static bool tegra_apb_dma_init(void)
{
dma_cap_mask_t mask;
diff --git a/arch/arm/mach-tegra/board-dt-tegra20.c b/arch/arm/mach-tegra/board-dt-tegra20.c
index 734d9cc..d320f7a 100644
--- a/arch/arm/mach-tegra/board-dt-tegra20.c
+++ b/arch/arm/mach-tegra/board-dt-tegra20.c
@@ -15,6 +15,7 @@
*
*/
+#include <linux/clocksource.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
@@ -25,7 +26,6 @@
#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/of_fdt.h>
-#include <linux/of_irq.h>
#include <linux/of_platform.h>
#include <linux/pda_power.h>
#include <linux/platform_data/tegra_usb.h>
@@ -34,7 +34,6 @@
#include <linux/i2c-tegra.h>
#include <linux/usb/tegra_usb_phy.h>
-#include <asm/hardware/gic.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/time.h>
@@ -45,31 +44,31 @@
#include "common.h"
#include "iomap.h"
-struct tegra_ehci_platform_data tegra_ehci1_pdata = {
+static struct tegra_ehci_platform_data tegra_ehci1_pdata = {
.operating_mode = TEGRA_USB_OTG,
.power_down_on_bus_suspend = 1,
.vbus_gpio = -1,
};
-struct tegra_ulpi_config tegra_ehci2_ulpi_phy_config = {
+static struct tegra_ulpi_config tegra_ehci2_ulpi_phy_config = {
.reset_gpio = -1,
.clk = "cdev2",
};
-struct tegra_ehci_platform_data tegra_ehci2_pdata = {
+static struct tegra_ehci_platform_data tegra_ehci2_pdata = {
.phy_config = &tegra_ehci2_ulpi_phy_config,
.operating_mode = TEGRA_USB_HOST,
.power_down_on_bus_suspend = 1,
.vbus_gpio = -1,
};
-struct tegra_ehci_platform_data tegra_ehci3_pdata = {
+static struct tegra_ehci_platform_data tegra_ehci3_pdata = {
.operating_mode = TEGRA_USB_HOST,
.power_down_on_bus_suspend = 1,
.vbus_gpio = -1,
};
-struct of_dev_auxdata tegra20_auxdata_lookup[] __initdata = {
+static struct of_dev_auxdata tegra20_auxdata_lookup[] __initdata = {
OF_DEV_AUXDATA("nvidia,tegra20-sdhci", TEGRA_SDMMC1_BASE, "sdhci-tegra.0", NULL),
OF_DEV_AUXDATA("nvidia,tegra20-sdhci", TEGRA_SDMMC2_BASE, "sdhci-tegra.1", NULL),
OF_DEV_AUXDATA("nvidia,tegra20-sdhci", TEGRA_SDMMC3_BASE, "sdhci-tegra.2", NULL),
@@ -202,8 +201,7 @@
.smp = smp_ops(tegra_smp_ops),
.init_early = tegra20_init_early,
.init_irq = tegra_dt_init_irq,
- .handle_irq = gic_handle_irq,
- .timer = &tegra_sys_timer,
+ .init_time = clocksource_of_init,
.init_machine = tegra_dt_init,
.init_late = tegra_dt_init_late,
.restart = tegra_assert_system_reset,
diff --git a/arch/arm/mach-tegra/board-dt-tegra30.c b/arch/arm/mach-tegra/board-dt-tegra30.c
index 6497d12..97e1f67 100644
--- a/arch/arm/mach-tegra/board-dt-tegra30.c
+++ b/arch/arm/mach-tegra/board-dt-tegra30.c
@@ -23,6 +23,7 @@
*
*/
+#include <linux/clocksource.h>
#include <linux/kernel.h>
#include <linux/of.h>
#include <linux/of_address.h>
@@ -31,14 +32,13 @@
#include <linux/of_platform.h>
#include <asm/mach/arch.h>
-#include <asm/hardware/gic.h>
#include "board.h"
#include "clock.h"
#include "common.h"
#include "iomap.h"
-struct of_dev_auxdata tegra30_auxdata_lookup[] __initdata = {
+static struct of_dev_auxdata tegra30_auxdata_lookup[] __initdata = {
OF_DEV_AUXDATA("nvidia,tegra20-sdhci", 0x78000000, "sdhci-tegra.0", NULL),
OF_DEV_AUXDATA("nvidia,tegra20-sdhci", 0x78000200, "sdhci-tegra.1", NULL),
OF_DEV_AUXDATA("nvidia,tegra20-sdhci", 0x78000400, "sdhci-tegra.2", NULL),
@@ -112,8 +112,7 @@
.map_io = tegra_map_common_io,
.init_early = tegra30_init_early,
.init_irq = tegra_dt_init_irq,
- .handle_irq = gic_handle_irq,
- .timer = &tegra_sys_timer,
+ .init_time = clocksource_of_init,
.init_machine = tegra30_dt_init,
.init_late = tegra_init_late,
.restart = tegra_assert_system_reset,
diff --git a/arch/arm/mach-tegra/board.h b/arch/arm/mach-tegra/board.h
index 91fbe73..da8f5a3 100644
--- a/arch/arm/mach-tegra/board.h
+++ b/arch/arm/mach-tegra/board.h
@@ -55,5 +55,4 @@
void __init tegra_paz00_wifikill_init(void);
-extern struct sys_timer tegra_sys_timer;
#endif
diff --git a/arch/arm/mach-tegra/common.c b/arch/arm/mach-tegra/common.c
index d54cfc5..8f0ffe9 100644
--- a/arch/arm/mach-tegra/common.c
+++ b/arch/arm/mach-tegra/common.c
@@ -21,10 +21,9 @@
#include <linux/io.h>
#include <linux/clk.h>
#include <linux/delay.h>
-#include <linux/of_irq.h>
+#include <linux/irqchip.h>
#include <asm/hardware/cache-l2x0.h>
-#include <asm/hardware/gic.h>
#include <mach/powergate.h>
@@ -37,6 +36,7 @@
#include "apbio.h"
#include "sleep.h"
#include "pm.h"
+#include "reset.h"
/*
* Storage for debug-macro.S's state.
@@ -57,15 +57,10 @@
};
#ifdef CONFIG_OF
-static const struct of_device_id tegra_dt_irq_match[] __initconst = {
- { .compatible = "arm,cortex-a9-gic", .data = gic_of_init },
- { }
-};
-
void __init tegra_dt_init_irq(void)
{
tegra_init_irq();
- of_irq_init(tegra_dt_irq_match);
+ irqchip_init();
}
#endif
@@ -137,6 +132,7 @@
#ifdef CONFIG_ARCH_TEGRA_2x_SOC
void __init tegra20_init_early(void)
{
+ tegra_cpu_reset_handler_init();
tegra_apb_io_init();
tegra_init_fuse();
tegra2_init_clocks();
@@ -150,6 +146,7 @@
#ifdef CONFIG_ARCH_TEGRA_3x_SOC
void __init tegra30_init_early(void)
{
+ tegra_cpu_reset_handler_init();
tegra_apb_io_init();
tegra_init_fuse();
tegra30_init_clocks();
diff --git a/arch/arm/mach-tegra/common.h b/arch/arm/mach-tegra/common.h
index 02f71b4..32f8eb3 100644
--- a/arch/arm/mach-tegra/common.h
+++ b/arch/arm/mach-tegra/common.h
@@ -1,4 +1,5 @@
extern struct smp_operations tegra_smp_ops;
+extern int tegra_cpu_kill(unsigned int cpu);
extern void tegra_cpu_die(unsigned int cpu);
extern int tegra_cpu_disable(unsigned int cpu);
diff --git a/arch/arm/mach-tegra/cpu-tegra.c b/arch/arm/mach-tegra/cpu-tegra.c
index a36a03d..ece29ab 100644
--- a/arch/arm/mach-tegra/cpu-tegra.c
+++ b/arch/arm/mach-tegra/cpu-tegra.c
@@ -214,24 +214,6 @@
if (policy->cpu >= NUM_CPUS)
return -EINVAL;
- cpu_clk = clk_get_sys(NULL, "cpu");
- if (IS_ERR(cpu_clk))
- return PTR_ERR(cpu_clk);
-
- pll_x_clk = clk_get_sys(NULL, "pll_x");
- if (IS_ERR(pll_x_clk))
- return PTR_ERR(pll_x_clk);
-
- pll_p_clk = clk_get_sys(NULL, "pll_p");
- if (IS_ERR(pll_p_clk))
- return PTR_ERR(pll_p_clk);
-
- emc_clk = clk_get_sys("cpu", "emc");
- if (IS_ERR(emc_clk)) {
- clk_put(cpu_clk);
- return PTR_ERR(emc_clk);
- }
-
clk_prepare_enable(emc_clk);
clk_prepare_enable(cpu_clk);
@@ -255,8 +237,6 @@
{
cpufreq_frequency_table_cpuinfo(policy, freq_table);
clk_disable_unprepare(emc_clk);
- clk_put(emc_clk);
- clk_put(cpu_clk);
return 0;
}
@@ -277,12 +257,32 @@
static int __init tegra_cpufreq_init(void)
{
+ cpu_clk = clk_get_sys(NULL, "cpu");
+ if (IS_ERR(cpu_clk))
+ return PTR_ERR(cpu_clk);
+
+ pll_x_clk = clk_get_sys(NULL, "pll_x");
+ if (IS_ERR(pll_x_clk))
+ return PTR_ERR(pll_x_clk);
+
+ pll_p_clk = clk_get_sys(NULL, "pll_p");
+ if (IS_ERR(pll_p_clk))
+ return PTR_ERR(pll_p_clk);
+
+ emc_clk = clk_get_sys("cpu", "emc");
+ if (IS_ERR(emc_clk)) {
+ clk_put(cpu_clk);
+ return PTR_ERR(emc_clk);
+ }
+
return cpufreq_register_driver(&tegra_cpufreq_driver);
}
static void __exit tegra_cpufreq_exit(void)
{
cpufreq_unregister_driver(&tegra_cpufreq_driver);
+ clk_put(emc_clk);
+ clk_put(cpu_clk);
}
diff --git a/arch/arm/mach-tegra/cpuidle-tegra30.c b/arch/arm/mach-tegra/cpuidle-tegra30.c
index 5e8cbf5..82530bd 100644
--- a/arch/arm/mach-tegra/cpuidle-tegra30.c
+++ b/arch/arm/mach-tegra/cpuidle-tegra30.c
@@ -121,9 +121,9 @@
}
#endif
-static int __cpuinit tegra30_idle_lp2(struct cpuidle_device *dev,
- struct cpuidle_driver *drv,
- int index)
+static int tegra30_idle_lp2(struct cpuidle_device *dev,
+ struct cpuidle_driver *drv,
+ int index)
{
u32 cpu = is_smp() ? cpu_logical_map(dev->cpu) : dev->cpu;
bool entered_lp2 = false;
diff --git a/arch/arm/mach-tegra/flowctrl.c b/arch/arm/mach-tegra/flowctrl.c
index a2250dd..5393eb2 100644
--- a/arch/arm/mach-tegra/flowctrl.c
+++ b/arch/arm/mach-tegra/flowctrl.c
@@ -26,14 +26,14 @@
#include "flowctrl.h"
#include "iomap.h"
-u8 flowctrl_offset_halt_cpu[] = {
+static u8 flowctrl_offset_halt_cpu[] = {
FLOW_CTRL_HALT_CPU0_EVENTS,
FLOW_CTRL_HALT_CPU1_EVENTS,
FLOW_CTRL_HALT_CPU1_EVENTS + 8,
FLOW_CTRL_HALT_CPU1_EVENTS + 16,
};
-u8 flowctrl_offset_cpu_csr[] = {
+static u8 flowctrl_offset_cpu_csr[] = {
FLOW_CTRL_CPU0_CSR,
FLOW_CTRL_CPU1_CSR,
FLOW_CTRL_CPU1_CSR + 8,
diff --git a/arch/arm/mach-tegra/headsmp.S b/arch/arm/mach-tegra/headsmp.S
index 4a317fa..b283481 100644
--- a/arch/arm/mach-tegra/headsmp.S
+++ b/arch/arm/mach-tegra/headsmp.S
@@ -1,22 +1,9 @@
#include <linux/linkage.h>
#include <linux/init.h>
-#include <asm/cache.h>
-#include <asm/asm-offsets.h>
-#include <asm/hardware/cache-l2x0.h>
-
-#include "flowctrl.h"
-#include "iomap.h"
-#include "reset.h"
#include "sleep.h"
-#define APB_MISC_GP_HIDREV 0x804
-#define PMC_SCRATCH41 0x140
-
-#define RESET_DATA(x) ((TEGRA_RESET_##x)*4)
-
.section ".text.head", "ax"
- __CPUINIT
/*
* Tegra specific entry point for secondary CPUs.
@@ -61,7 +48,6 @@
mov pc, lr
ENDPROC(v7_invalidate_l1)
-
ENTRY(tegra_secondary_startup)
bl v7_invalidate_l1
/* Enable coresight */
@@ -69,210 +55,3 @@
mcr p14, 0, r0, c7, c12, 6
b secondary_startup
ENDPROC(tegra_secondary_startup)
-
-#ifdef CONFIG_PM_SLEEP
-/*
- * tegra_resume
- *
- * CPU boot vector when restarting the a CPU following
- * an LP2 transition. Also branched to by LP0 and LP1 resume after
- * re-enabling sdram.
- */
-ENTRY(tegra_resume)
- bl v7_invalidate_l1
- /* Enable coresight */
- mov32 r0, 0xC5ACCE55
- mcr p14, 0, r0, c7, c12, 6
-
- cpu_id r0
- cmp r0, #0 @ CPU0?
- bne cpu_resume @ no
-
-#ifdef CONFIG_ARCH_TEGRA_3x_SOC
- /* Are we on Tegra20? */
- mov32 r6, TEGRA_APB_MISC_BASE
- ldr r0, [r6, #APB_MISC_GP_HIDREV]
- and r0, r0, #0xff00
- cmp r0, #(0x20 << 8)
- beq 1f @ Yes
- /* Clear the flow controller flags for this CPU. */
- mov32 r2, TEGRA_FLOW_CTRL_BASE + FLOW_CTRL_CPU0_CSR @ CPU0 CSR
- ldr r1, [r2]
- /* Clear event & intr flag */
- orr r1, r1, \
- #FLOW_CTRL_CSR_INTR_FLAG | FLOW_CTRL_CSR_EVENT_FLAG
- movw r0, #0x0FFD @ enable, cluster_switch, immed, & bitmaps
- bic r1, r1, r0
- str r1, [r2]
-1:
-#endif
-
-#ifdef CONFIG_HAVE_ARM_SCU
- /* enable SCU */
- mov32 r0, TEGRA_ARM_PERIF_BASE
- ldr r1, [r0]
- orr r1, r1, #1
- str r1, [r0]
-#endif
-
- /* L2 cache resume & re-enable */
- l2_cache_resume r0, r1, r2, l2x0_saved_regs_addr
-
- b cpu_resume
-ENDPROC(tegra_resume)
-#endif
-
-#ifdef CONFIG_CACHE_L2X0
- .globl l2x0_saved_regs_addr
-l2x0_saved_regs_addr:
- .long 0
-#endif
-
- .align L1_CACHE_SHIFT
-ENTRY(__tegra_cpu_reset_handler_start)
-
-/*
- * __tegra_cpu_reset_handler:
- *
- * Common handler for all CPU reset events.
- *
- * Register usage within the reset handler:
- *
- * R7 = CPU present (to the OS) mask
- * R8 = CPU in LP1 state mask
- * R9 = CPU in LP2 state mask
- * R10 = CPU number
- * R11 = CPU mask
- * R12 = pointer to reset handler data
- *
- * NOTE: This code is copied to IRAM. All code and data accesses
- * must be position-independent.
- */
-
- .align L1_CACHE_SHIFT
-ENTRY(__tegra_cpu_reset_handler)
-
- cpsid aif, 0x13 @ SVC mode, interrupts disabled
- mrc p15, 0, r10, c0, c0, 5 @ MPIDR
- and r10, r10, #0x3 @ R10 = CPU number
- mov r11, #1
- mov r11, r11, lsl r10 @ R11 = CPU mask
- adr r12, __tegra_cpu_reset_handler_data
-
-#ifdef CONFIG_SMP
- /* Does the OS know about this CPU? */
- ldr r7, [r12, #RESET_DATA(MASK_PRESENT)]
- tst r7, r11 @ if !present
- bleq __die @ CPU not present (to OS)
-#endif
-
-#ifdef CONFIG_ARCH_TEGRA_2x_SOC
- /* Are we on Tegra20? */
- mov32 r6, TEGRA_APB_MISC_BASE
- ldr r0, [r6, #APB_MISC_GP_HIDREV]
- and r0, r0, #0xff00
- cmp r0, #(0x20 << 8)
- bne 1f
- /* If not CPU0, don't let CPU0 reset CPU1 now that CPU1 is coming up. */
- mov32 r6, TEGRA_PMC_BASE
- mov r0, #0
- cmp r10, #0
- strne r0, [r6, #PMC_SCRATCH41]
-1:
-#endif
-
- /* Waking up from LP2? */
- ldr r9, [r12, #RESET_DATA(MASK_LP2)]
- tst r9, r11 @ if in_lp2
- beq __is_not_lp2
- ldr lr, [r12, #RESET_DATA(STARTUP_LP2)]
- cmp lr, #0
- bleq __die @ no LP2 startup handler
- bx lr
-
-__is_not_lp2:
-
-#ifdef CONFIG_SMP
- /*
- * Can only be secondary boot (initial or hotplug) but CPU 0
- * cannot be here.
- */
- cmp r10, #0
- bleq __die @ CPU0 cannot be here
- ldr lr, [r12, #RESET_DATA(STARTUP_SECONDARY)]
- cmp lr, #0
- bleq __die @ no secondary startup handler
- bx lr
-#endif
-
-/*
- * We don't know why the CPU reset. Just kill it.
- * The LR register will contain the address we died at + 4.
- */
-
-__die:
- sub lr, lr, #4
- mov32 r7, TEGRA_PMC_BASE
- str lr, [r7, #PMC_SCRATCH41]
-
- mov32 r7, TEGRA_CLK_RESET_BASE
-
- /* Are we on Tegra20? */
- mov32 r6, TEGRA_APB_MISC_BASE
- ldr r0, [r6, #APB_MISC_GP_HIDREV]
- and r0, r0, #0xff00
- cmp r0, #(0x20 << 8)
- bne 1f
-
-#ifdef CONFIG_ARCH_TEGRA_2x_SOC
- mov32 r0, 0x1111
- mov r1, r0, lsl r10
- str r1, [r7, #0x340] @ CLK_RST_CPU_CMPLX_SET
-#endif
-1:
-#ifdef CONFIG_ARCH_TEGRA_3x_SOC
- mov32 r6, TEGRA_FLOW_CTRL_BASE
-
- cmp r10, #0
- moveq r1, #FLOW_CTRL_HALT_CPU0_EVENTS
- moveq r2, #FLOW_CTRL_CPU0_CSR
- movne r1, r10, lsl #3
- addne r2, r1, #(FLOW_CTRL_CPU1_CSR-8)
- addne r1, r1, #(FLOW_CTRL_HALT_CPU1_EVENTS-8)
-
- /* Clear CPU "event" and "interrupt" flags and power gate
- it when halting but not before it is in the "WFI" state. */
- ldr r0, [r6, +r2]
- orr r0, r0, #FLOW_CTRL_CSR_INTR_FLAG | FLOW_CTRL_CSR_EVENT_FLAG
- orr r0, r0, #FLOW_CTRL_CSR_ENABLE
- str r0, [r6, +r2]
-
- /* Unconditionally halt this CPU */
- mov r0, #FLOW_CTRL_WAITEVENT
- str r0, [r6, +r1]
- ldr r0, [r6, +r1] @ memory barrier
-
- dsb
- isb
- wfi @ CPU should be power gated here
-
- /* If the CPU didn't power gate above just kill it's clock. */
-
- mov r0, r11, lsl #8
- str r0, [r7, #348] @ CLK_CPU_CMPLX_SET
-#endif
-
- /* If the CPU still isn't dead, just spin here. */
- b .
-ENDPROC(__tegra_cpu_reset_handler)
-
- .align L1_CACHE_SHIFT
- .type __tegra_cpu_reset_handler_data, %object
- .globl __tegra_cpu_reset_handler_data
-__tegra_cpu_reset_handler_data:
- .rept TEGRA_RESET_DATA_SIZE
- .long 0
- .endr
- .align L1_CACHE_SHIFT
-
-ENTRY(__tegra_cpu_reset_handler_end)
diff --git a/arch/arm/mach-tegra/hotplug.c b/arch/arm/mach-tegra/hotplug.c
index dca5141..6a27de4 100644
--- a/arch/arm/mach-tegra/hotplug.c
+++ b/arch/arm/mach-tegra/hotplug.c
@@ -19,6 +19,17 @@
static void (*tegra_hotplug_shutdown)(void);
+int tegra_cpu_kill(unsigned cpu)
+{
+ cpu = cpu_logical_map(cpu);
+
+ /* Clock gate the CPU */
+ tegra_wait_cpu_in_reset(cpu);
+ tegra_disable_cpu_clock(cpu);
+
+ return 1;
+}
+
/*
* platform-specific code to shutdown a CPU
*
@@ -26,18 +37,12 @@
*/
void __ref tegra_cpu_die(unsigned int cpu)
{
- cpu = cpu_logical_map(cpu);
-
- /* Flush the L1 data cache. */
- flush_cache_all();
+ /* Clean L1 data cache */
+ tegra_disable_clean_inv_dcache();
/* Shut down the current CPU. */
tegra_hotplug_shutdown();
- /* Clock gate the CPU */
- tegra_wait_cpu_in_reset(cpu);
- tegra_disable_cpu_clock(cpu);
-
/* Should never return here. */
BUG();
}
diff --git a/arch/arm/mach-tegra/include/mach/uncompress.h b/arch/arm/mach-tegra/include/mach/uncompress.h
index 485003f..0838641 100644
--- a/arch/arm/mach-tegra/include/mach/uncompress.h
+++ b/arch/arm/mach-tegra/include/mach/uncompress.h
@@ -172,8 +172,4 @@
uart[UART_LCR << DEBUG_UART_SHIFT] = 3;
}
-static inline void arch_decomp_wdog(void)
-{
-}
-
#endif
diff --git a/arch/arm/mach-tegra/irq.c b/arch/arm/mach-tegra/irq.c
index b7886f1..2ff2128 100644
--- a/arch/arm/mach-tegra/irq.c
+++ b/arch/arm/mach-tegra/irq.c
@@ -22,8 +22,7 @@
#include <linux/irq.h>
#include <linux/io.h>
#include <linux/of.h>
-
-#include <asm/hardware/gic.h>
+#include <linux/irqchip/arm-gic.h>
#include "board.h"
#include "iomap.h"
diff --git a/arch/arm/mach-tegra/platsmp.c b/arch/arm/mach-tegra/platsmp.c
index 1b926df..3c4a43c 100644
--- a/arch/arm/mach-tegra/platsmp.c
+++ b/arch/arm/mach-tegra/platsmp.c
@@ -18,11 +18,12 @@
#include <linux/jiffies.h>
#include <linux/smp.h>
#include <linux/io.h>
+#include <linux/irqchip/arm-gic.h>
#include <asm/cacheflush.h>
-#include <asm/hardware/gic.h>
#include <asm/mach-types.h>
#include <asm/smp_scu.h>
+#include <asm/smp_plat.h>
#include <mach/powergate.h>
@@ -36,6 +37,7 @@
extern void tegra_secondary_startup(void);
+static cpumask_t tegra_cpu_init_mask;
static void __iomem *scu_base = IO_ADDRESS(TEGRA_ARM_PERIF_BASE);
#define EVP_CPU_RESET_VECTOR \
@@ -50,6 +52,7 @@
*/
gic_secondary_init(0);
+ cpumask_set_cpu(cpu, &tegra_cpu_init_mask);
}
static int tegra20_power_up_cpu(unsigned int cpu)
@@ -72,14 +75,42 @@
if (pwrgateid < 0)
return pwrgateid;
- /* If this is the first boot, toggle powergates directly. */
+ /*
+ * The power up sequence of cold boot CPU and warm boot CPU
+ * was different.
+ *
+ * For warm boot CPU that was resumed from CPU hotplug, the
+ * power will be resumed automatically after un-halting the
+ * flow controller of the warm boot CPU. We need to wait for
+ * the confirmaiton that the CPU is powered then removing
+ * the IO clamps.
+ * For cold boot CPU, do not wait. After the cold boot CPU be
+ * booted, it will run to tegra_secondary_init() and set
+ * tegra_cpu_init_mask which influences what tegra30_power_up_cpu()
+ * next time around.
+ */
+ if (cpumask_test_cpu(cpu, &tegra_cpu_init_mask)) {
+ timeout = jiffies + msecs_to_jiffies(50);
+ do {
+ if (!tegra_powergate_is_powered(pwrgateid))
+ goto remove_clamps;
+ udelay(10);
+ } while (time_before(jiffies, timeout));
+ }
+
+ /*
+ * The power status of the cold boot CPU is power gated as
+ * default. To power up the cold boot CPU, the power should
+ * be un-gated by un-toggling the power gate register
+ * manually.
+ */
if (!tegra_powergate_is_powered(pwrgateid)) {
ret = tegra_powergate_power_on(pwrgateid);
if (ret)
return ret;
/* Wait for the power to come up. */
- timeout = jiffies + 10*HZ;
+ timeout = jiffies + msecs_to_jiffies(100);
while (tegra_powergate_is_powered(pwrgateid)) {
if (time_after(jiffies, timeout))
return -ETIMEDOUT;
@@ -87,6 +118,7 @@
}
}
+remove_clamps:
/* CPU partition is powered. Enable the CPU clock. */
tegra_enable_cpu_clock(cpu);
udelay(10);
@@ -105,6 +137,8 @@
{
int status;
+ cpu = cpu_logical_map(cpu);
+
/*
* Force the CPU into reset. The CPU must remain in reset when the
* flow controller state is cleared (which will cause the flow
@@ -159,13 +193,13 @@
for (i = 0; i < ncores; i++)
set_cpu_possible(i, true);
-
- set_smp_cross_call(gic_raise_softirq);
}
static void __init tegra_smp_prepare_cpus(unsigned int max_cpus)
{
- tegra_cpu_reset_handler_init();
+ /* Always mark the boot CPU (CPU0) as initialized. */
+ cpumask_set_cpu(0, &tegra_cpu_init_mask);
+
scu_enable(scu_base);
}
@@ -175,6 +209,7 @@
.smp_secondary_init = tegra_secondary_init,
.smp_boot_secondary = tegra_boot_secondary,
#ifdef CONFIG_HOTPLUG_CPU
+ .cpu_kill = tegra_cpu_kill,
.cpu_die = tegra_cpu_die,
.cpu_disable = tegra_cpu_disable,
#endif
diff --git a/arch/arm/mach-tegra/pm.c b/arch/arm/mach-tegra/pm.c
index 1b11707..498d70b 100644
--- a/arch/arm/mach-tegra/pm.c
+++ b/arch/arm/mach-tegra/pm.c
@@ -148,7 +148,7 @@
save_cpu_arch_register();
}
-void __cpuinit tegra_clear_cpu_in_lp2(int phy_cpu_id)
+void tegra_clear_cpu_in_lp2(int phy_cpu_id)
{
u32 *cpu_in_lp2 = tegra_cpu_lp2_mask;
@@ -160,7 +160,7 @@
spin_unlock(&tegra_lp2_lock);
}
-bool __cpuinit tegra_set_cpu_in_lp2(int phy_cpu_id)
+bool tegra_set_cpu_in_lp2(int phy_cpu_id)
{
bool last_cpu = false;
cpumask_t *cpu_lp2_mask = tegra_cpu_lp2_mask;
diff --git a/arch/arm/mach-tegra/reset-handler.S b/arch/arm/mach-tegra/reset-handler.S
new file mode 100644
index 0000000..54382ce
--- /dev/null
+++ b/arch/arm/mach-tegra/reset-handler.S
@@ -0,0 +1,239 @@
+/*
+ * Copyright (c) 2012, NVIDIA Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/linkage.h>
+#include <linux/init.h>
+
+#include <asm/cache.h>
+#include <asm/asm-offsets.h>
+#include <asm/hardware/cache-l2x0.h>
+
+#include "flowctrl.h"
+#include "iomap.h"
+#include "reset.h"
+#include "sleep.h"
+
+#define APB_MISC_GP_HIDREV 0x804
+#define PMC_SCRATCH41 0x140
+
+#define RESET_DATA(x) ((TEGRA_RESET_##x)*4)
+
+#ifdef CONFIG_PM_SLEEP
+/*
+ * tegra_resume
+ *
+ * CPU boot vector when restarting the a CPU following
+ * an LP2 transition. Also branched to by LP0 and LP1 resume after
+ * re-enabling sdram.
+ */
+ENTRY(tegra_resume)
+ bl v7_invalidate_l1
+ /* Enable coresight */
+ mov32 r0, 0xC5ACCE55
+ mcr p14, 0, r0, c7, c12, 6
+
+ cpu_id r0
+ cmp r0, #0 @ CPU0?
+ bne cpu_resume @ no
+
+#ifdef CONFIG_ARCH_TEGRA_3x_SOC
+ /* Are we on Tegra20? */
+ mov32 r6, TEGRA_APB_MISC_BASE
+ ldr r0, [r6, #APB_MISC_GP_HIDREV]
+ and r0, r0, #0xff00
+ cmp r0, #(0x20 << 8)
+ beq 1f @ Yes
+ /* Clear the flow controller flags for this CPU. */
+ mov32 r2, TEGRA_FLOW_CTRL_BASE + FLOW_CTRL_CPU0_CSR @ CPU0 CSR
+ ldr r1, [r2]
+ /* Clear event & intr flag */
+ orr r1, r1, \
+ #FLOW_CTRL_CSR_INTR_FLAG | FLOW_CTRL_CSR_EVENT_FLAG
+ movw r0, #0x0FFD @ enable, cluster_switch, immed, & bitmaps
+ bic r1, r1, r0
+ str r1, [r2]
+1:
+#endif
+
+#ifdef CONFIG_HAVE_ARM_SCU
+ /* enable SCU */
+ mov32 r0, TEGRA_ARM_PERIF_BASE
+ ldr r1, [r0]
+ orr r1, r1, #1
+ str r1, [r0]
+#endif
+
+ /* L2 cache resume & re-enable */
+ l2_cache_resume r0, r1, r2, l2x0_saved_regs_addr
+
+ b cpu_resume
+ENDPROC(tegra_resume)
+#endif
+
+#ifdef CONFIG_CACHE_L2X0
+ .globl l2x0_saved_regs_addr
+l2x0_saved_regs_addr:
+ .long 0
+#endif
+
+ .align L1_CACHE_SHIFT
+ENTRY(__tegra_cpu_reset_handler_start)
+
+/*
+ * __tegra_cpu_reset_handler:
+ *
+ * Common handler for all CPU reset events.
+ *
+ * Register usage within the reset handler:
+ *
+ * R7 = CPU present (to the OS) mask
+ * R8 = CPU in LP1 state mask
+ * R9 = CPU in LP2 state mask
+ * R10 = CPU number
+ * R11 = CPU mask
+ * R12 = pointer to reset handler data
+ *
+ * NOTE: This code is copied to IRAM. All code and data accesses
+ * must be position-independent.
+ */
+
+ .align L1_CACHE_SHIFT
+ENTRY(__tegra_cpu_reset_handler)
+
+ cpsid aif, 0x13 @ SVC mode, interrupts disabled
+ mrc p15, 0, r10, c0, c0, 5 @ MPIDR
+ and r10, r10, #0x3 @ R10 = CPU number
+ mov r11, #1
+ mov r11, r11, lsl r10 @ R11 = CPU mask
+ adr r12, __tegra_cpu_reset_handler_data
+
+#ifdef CONFIG_SMP
+ /* Does the OS know about this CPU? */
+ ldr r7, [r12, #RESET_DATA(MASK_PRESENT)]
+ tst r7, r11 @ if !present
+ bleq __die @ CPU not present (to OS)
+#endif
+
+#ifdef CONFIG_ARCH_TEGRA_2x_SOC
+ /* Are we on Tegra20? */
+ mov32 r6, TEGRA_APB_MISC_BASE
+ ldr r0, [r6, #APB_MISC_GP_HIDREV]
+ and r0, r0, #0xff00
+ cmp r0, #(0x20 << 8)
+ bne 1f
+ /* If not CPU0, don't let CPU0 reset CPU1 now that CPU1 is coming up. */
+ mov32 r6, TEGRA_PMC_BASE
+ mov r0, #0
+ cmp r10, #0
+ strne r0, [r6, #PMC_SCRATCH41]
+1:
+#endif
+
+ /* Waking up from LP2? */
+ ldr r9, [r12, #RESET_DATA(MASK_LP2)]
+ tst r9, r11 @ if in_lp2
+ beq __is_not_lp2
+ ldr lr, [r12, #RESET_DATA(STARTUP_LP2)]
+ cmp lr, #0
+ bleq __die @ no LP2 startup handler
+ bx lr
+
+__is_not_lp2:
+
+#ifdef CONFIG_SMP
+ /*
+ * Can only be secondary boot (initial or hotplug) but CPU 0
+ * cannot be here.
+ */
+ cmp r10, #0
+ bleq __die @ CPU0 cannot be here
+ ldr lr, [r12, #RESET_DATA(STARTUP_SECONDARY)]
+ cmp lr, #0
+ bleq __die @ no secondary startup handler
+ bx lr
+#endif
+
+/*
+ * We don't know why the CPU reset. Just kill it.
+ * The LR register will contain the address we died at + 4.
+ */
+
+__die:
+ sub lr, lr, #4
+ mov32 r7, TEGRA_PMC_BASE
+ str lr, [r7, #PMC_SCRATCH41]
+
+ mov32 r7, TEGRA_CLK_RESET_BASE
+
+ /* Are we on Tegra20? */
+ mov32 r6, TEGRA_APB_MISC_BASE
+ ldr r0, [r6, #APB_MISC_GP_HIDREV]
+ and r0, r0, #0xff00
+ cmp r0, #(0x20 << 8)
+ bne 1f
+
+#ifdef CONFIG_ARCH_TEGRA_2x_SOC
+ mov32 r0, 0x1111
+ mov r1, r0, lsl r10
+ str r1, [r7, #0x340] @ CLK_RST_CPU_CMPLX_SET
+#endif
+1:
+#ifdef CONFIG_ARCH_TEGRA_3x_SOC
+ mov32 r6, TEGRA_FLOW_CTRL_BASE
+
+ cmp r10, #0
+ moveq r1, #FLOW_CTRL_HALT_CPU0_EVENTS
+ moveq r2, #FLOW_CTRL_CPU0_CSR
+ movne r1, r10, lsl #3
+ addne r2, r1, #(FLOW_CTRL_CPU1_CSR-8)
+ addne r1, r1, #(FLOW_CTRL_HALT_CPU1_EVENTS-8)
+
+ /* Clear CPU "event" and "interrupt" flags and power gate
+ it when halting but not before it is in the "WFI" state. */
+ ldr r0, [r6, +r2]
+ orr r0, r0, #FLOW_CTRL_CSR_INTR_FLAG | FLOW_CTRL_CSR_EVENT_FLAG
+ orr r0, r0, #FLOW_CTRL_CSR_ENABLE
+ str r0, [r6, +r2]
+
+ /* Unconditionally halt this CPU */
+ mov r0, #FLOW_CTRL_WAITEVENT
+ str r0, [r6, +r1]
+ ldr r0, [r6, +r1] @ memory barrier
+
+ dsb
+ isb
+ wfi @ CPU should be power gated here
+
+ /* If the CPU didn't power gate above just kill it's clock. */
+
+ mov r0, r11, lsl #8
+ str r0, [r7, #348] @ CLK_CPU_CMPLX_SET
+#endif
+
+ /* If the CPU still isn't dead, just spin here. */
+ b .
+ENDPROC(__tegra_cpu_reset_handler)
+
+ .align L1_CACHE_SHIFT
+ .type __tegra_cpu_reset_handler_data, %object
+ .globl __tegra_cpu_reset_handler_data
+__tegra_cpu_reset_handler_data:
+ .rept TEGRA_RESET_DATA_SIZE
+ .long 0
+ .endr
+ .align L1_CACHE_SHIFT
+
+ENTRY(__tegra_cpu_reset_handler_end)
diff --git a/arch/arm/mach-tegra/reset.c b/arch/arm/mach-tegra/reset.c
index 3fd89ec..1ac434e 100644
--- a/arch/arm/mach-tegra/reset.c
+++ b/arch/arm/mach-tegra/reset.c
@@ -75,7 +75,7 @@
#ifdef CONFIG_SMP
__tegra_cpu_reset_handler_data[TEGRA_RESET_MASK_PRESENT] =
- *((u32 *)cpu_present_mask);
+ *((u32 *)cpu_possible_mask);
__tegra_cpu_reset_handler_data[TEGRA_RESET_STARTUP_SECONDARY] =
virt_to_phys((void *)tegra_secondary_startup);
#endif
diff --git a/arch/arm/mach-tegra/sleep-tegra20.S b/arch/arm/mach-tegra/sleep-tegra20.S
index 72ce709..ad2ca07 100644
--- a/arch/arm/mach-tegra/sleep-tegra20.S
+++ b/arch/arm/mach-tegra/sleep-tegra20.S
@@ -33,9 +33,6 @@
* should never return
*/
ENTRY(tegra20_hotplug_shutdown)
- /* Turn off SMP coherency */
- exit_smp r4, r5
-
/* Put this CPU down */
cpu_id r0
bl tegra20_cpu_shutdown
diff --git a/arch/arm/mach-tegra/sleep-tegra30.S b/arch/arm/mach-tegra/sleep-tegra30.S
index 562a8e7..63a15bd 100644
--- a/arch/arm/mach-tegra/sleep-tegra30.S
+++ b/arch/arm/mach-tegra/sleep-tegra30.S
@@ -32,9 +32,6 @@
* Should never return.
*/
ENTRY(tegra30_hotplug_shutdown)
- /* Turn off SMP coherency */
- exit_smp r4, r5
-
/* Powergate this CPU */
mov r0, #TEGRA30_POWER_HOTPLUG_SHUTDOWN
bl tegra30_cpu_shutdown
diff --git a/arch/arm/mach-tegra/sleep.S b/arch/arm/mach-tegra/sleep.S
index 26afa7c..addae35 100644
--- a/arch/arm/mach-tegra/sleep.S
+++ b/arch/arm/mach-tegra/sleep.S
@@ -34,7 +34,7 @@
#include "flowctrl.h"
#include "sleep.h"
-#ifdef CONFIG_PM_SLEEP
+#if defined(CONFIG_HOTPLUG_CPU) || defined(CONFIG_PM_SLEEP)
/*
* tegra_disable_clean_inv_dcache
*
@@ -60,7 +60,9 @@
ldmfd sp!, {r0, r4-r5, r7, r9-r11, pc}
ENDPROC(tegra_disable_clean_inv_dcache)
+#endif
+#ifdef CONFIG_PM_SLEEP
/*
* tegra_sleep_cpu_finish(unsigned long v2p)
*
diff --git a/arch/arm/mach-tegra/sleep.h b/arch/arm/mach-tegra/sleep.h
index 9821ee7..56505c3 100644
--- a/arch/arm/mach-tegra/sleep.h
+++ b/arch/arm/mach-tegra/sleep.h
@@ -106,6 +106,7 @@
#else
void tegra_resume(void);
int tegra_sleep_cpu_finish(unsigned long);
+void tegra_disable_clean_inv_dcache(void);
#ifdef CONFIG_HOTPLUG_CPU
void tegra20_hotplug_init(void);
diff --git a/arch/arm/mach-tegra/tegra30_clocks_data.c b/arch/arm/mach-tegra/tegra30_clocks_data.c
index 6942c7a..741d264 100644
--- a/arch/arm/mach-tegra/tegra30_clocks_data.c
+++ b/arch/arm/mach-tegra/tegra30_clocks_data.c
@@ -1183,7 +1183,7 @@
.num_parents = ARRAY_SIZE(mux_plld_out0_plld2_out0),
};
-struct clk *tegra_list_clks[] = {
+static struct clk *tegra_list_clks[] = {
&tegra_apbdma,
&tegra_rtc,
&tegra_kbc,
@@ -1289,7 +1289,7 @@
* configuration. List those here to register them twice in the clock lookup
* table under two names.
*/
-struct clk_duplicate tegra_clk_duplicates[] = {
+static struct clk_duplicate tegra_clk_duplicates[] = {
CLK_DUPLICATE("uarta", "serial8250.0", NULL),
CLK_DUPLICATE("uartb", "serial8250.1", NULL),
CLK_DUPLICATE("uartc", "serial8250.2", NULL),
@@ -1340,7 +1340,7 @@
CLK_DUPLICATE("pll_d2_out0", "hdmi", "parent"),
};
-struct clk *tegra_ptr_clks[] = {
+static struct clk *tegra_ptr_clks[] = {
&tegra_clk_32k,
&tegra_clk_m,
&tegra_clk_m_div2,
diff --git a/arch/arm/mach-u300/core.c b/arch/arm/mach-u300/core.c
index 4ce77cd..12060ae 100644
--- a/arch/arm/mach-u300/core.c
+++ b/arch/arm/mach-u300/core.c
@@ -31,11 +31,11 @@
#include <linux/dma-mapping.h>
#include <linux/platform_data/clk-u300.h>
#include <linux/platform_data/pinctrl-coh901.h>
+#include <linux/irqchip/arm-vic.h>
#include <asm/types.h>
#include <asm/setup.h>
#include <asm/memory.h>
-#include <asm/hardware/vic.h>
#include <asm/mach/map.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
@@ -1779,8 +1779,7 @@
.map_io = u300_map_io,
.nr_irqs = 0,
.init_irq = u300_init_irq,
- .handle_irq = vic_handle_irq,
- .timer = &u300_timer,
+ .init_time = u300_timer_init,
.init_machine = u300_init_machine,
.restart = u300_restart,
MACHINE_END
diff --git a/arch/arm/mach-u300/include/mach/uncompress.h b/arch/arm/mach-u300/include/mach/uncompress.h
index 29acb71..783e7e6 100644
--- a/arch/arm/mach-u300/include/mach/uncompress.h
+++ b/arch/arm/mach-u300/include/mach/uncompress.h
@@ -43,4 +43,3 @@
* nothing to do
*/
#define arch_decomp_setup()
-#define arch_decomp_wdog()
diff --git a/arch/arm/mach-u300/timer.c b/arch/arm/mach-u300/timer.c
index 1da10e2..d9e7320 100644
--- a/arch/arm/mach-u300/timer.c
+++ b/arch/arm/mach-u300/timer.c
@@ -349,7 +349,7 @@
/*
* This sets up the system timers, clock source and clock event.
*/
-static void __init u300_timer_init(void)
+void __init u300_timer_init(void)
{
struct clk *clk;
unsigned long rate;
@@ -413,11 +413,3 @@
* used by hrtimers!
*/
}
-
-/*
- * Very simple system timer that only register the clock event and
- * clock source.
- */
-struct sys_timer u300_timer = {
- .init = u300_timer_init,
-};
diff --git a/arch/arm/mach-u300/timer.h b/arch/arm/mach-u300/timer.h
index b5e9791..d34287b 100644
--- a/arch/arm/mach-u300/timer.h
+++ b/arch/arm/mach-u300/timer.h
@@ -1 +1 @@
-extern struct sys_timer u300_timer;
+extern void u300_timer_init(void);
diff --git a/arch/arm/mach-ux500/board-mop500-uib.c b/arch/arm/mach-ux500/board-mop500-uib.c
index 1f47d96..7037d36 100644
--- a/arch/arm/mach-ux500/board-mop500-uib.c
+++ b/arch/arm/mach-ux500/board-mop500-uib.c
@@ -13,6 +13,7 @@
#include <mach/hardware.h>
#include "board-mop500.h"
+#include "id.h"
enum mop500_uib {
STUIB,
diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c
index b8781ca..3868aa4 100644
--- a/arch/arm/mach-ux500/board-mop500.c
+++ b/arch/arm/mach-ux500/board-mop500.c
@@ -40,7 +40,6 @@
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
-#include <asm/hardware/gic.h>
#include <mach/hardware.h>
#include <mach/setup.h>
@@ -197,7 +196,7 @@
},
};
-static struct ab8500_platform_data ab8500_platdata = {
+struct ab8500_platform_data ab8500_platdata = {
.irq_base = MOP500_AB8500_IRQ_BASE,
.regulator_reg_init = ab8500_regulator_reg_init,
.num_regulator_reg_init = ARRAY_SIZE(ab8500_regulator_reg_init),
@@ -633,6 +632,7 @@
int i2c0_devs;
int i;
+ platform_device_register(&db8500_prcmu_device);
mop500_gpio_keys[0].gpio = GPIO_PROX_SENSOR;
mop500_pinmaps_init();
@@ -667,6 +667,7 @@
struct device *parent = NULL;
int i;
+ platform_device_register(&db8500_prcmu_device);
snowball_pinmaps_init();
parent = u8500_init_devices(&ab8500_platdata);
@@ -692,6 +693,7 @@
int i2c0_devs;
int i;
+ platform_device_register(&db8500_prcmu_device);
/*
* The HREFv60 board removed a GPIO expander and routed
* all these GPIO pins to the internal GPIO controller
@@ -733,8 +735,7 @@
.map_io = u8500_map_io,
.init_irq = ux500_init_irq,
/* we re-use nomadik timer here */
- .timer = &ux500_timer,
- .handle_irq = gic_handle_irq,
+ .init_time = ux500_timer_init,
.init_machine = mop500_init_machine,
.init_late = ux500_init_late,
MACHINE_END
@@ -743,8 +744,7 @@
.atag_offset = 0x100,
.map_io = u8500_map_io,
.init_irq = ux500_init_irq,
- .timer = &ux500_timer,
- .handle_irq = gic_handle_irq,
+ .init_time = ux500_timer_init,
.init_machine = mop500_init_machine,
.init_late = ux500_init_late,
MACHINE_END
@@ -754,8 +754,7 @@
.smp = smp_ops(ux500_smp_ops),
.map_io = u8500_map_io,
.init_irq = ux500_init_irq,
- .timer = &ux500_timer,
- .handle_irq = gic_handle_irq,
+ .init_time = ux500_timer_init,
.init_machine = hrefv60_init_machine,
.init_late = ux500_init_late,
MACHINE_END
@@ -766,8 +765,7 @@
.map_io = u8500_map_io,
.init_irq = ux500_init_irq,
/* we re-use nomadik timer here */
- .timer = &ux500_timer,
- .handle_irq = gic_handle_irq,
+ .init_time = ux500_timer_init,
.init_machine = snowball_init_machine,
.init_late = NULL,
MACHINE_END
diff --git a/arch/arm/mach-ux500/cache-l2x0.c b/arch/arm/mach-ux500/cache-l2x0.c
index 75d5b51..1c1609d 100644
--- a/arch/arm/mach-ux500/cache-l2x0.c
+++ b/arch/arm/mach-ux500/cache-l2x0.c
@@ -10,7 +10,8 @@
#include <asm/cacheflush.h>
#include <asm/hardware/cache-l2x0.h>
#include <mach/hardware.h>
-#include <mach/id.h>
+
+#include "id.h"
static void __iomem *l2x0_base;
diff --git a/arch/arm/mach-ux500/cpu-db8500.c b/arch/arm/mach-ux500/cpu-db8500.c
index b80ad96..19235cf 100644
--- a/arch/arm/mach-ux500/cpu-db8500.c
+++ b/arch/arm/mach-ux500/cpu-db8500.c
@@ -27,7 +27,6 @@
#include <asm/pmu.h>
#include <asm/mach/map.h>
#include <asm/mach/arch.h>
-#include <asm/hardware/gic.h>
#include <mach/hardware.h>
#include <mach/setup.h>
@@ -37,7 +36,9 @@
#include "devices-db8500.h"
#include "ste-dma40-db8500.h"
+
#include "board-mop500.h"
+#include "id.h"
/* minimum static i/o mapping required to boot U8500 platforms */
static struct map_desc u8500_uart_io_desc[] __initdata = {
@@ -137,14 +138,9 @@
.dev.platform_data = &db8500_pmu_platdata,
};
-static struct platform_device db8500_prcmu_device = {
- .name = "db8500-prcmu",
-};
-
static struct platform_device *platform_devs[] __initdata = {
&u8500_dma40_device,
&db8500_pmu_device,
- &db8500_prcmu_device,
};
static resource_size_t __initdata db8500_gpio_base[] = {
@@ -284,6 +280,8 @@
OF_DEV_AUXDATA("st,nomadik-i2c", 0x80128000, "nmk-i2c.2", NULL),
OF_DEV_AUXDATA("st,nomadik-i2c", 0x80110000, "nmk-i2c.3", NULL),
OF_DEV_AUXDATA("st,nomadik-i2c", 0x8012a000, "nmk-i2c.4", NULL),
+ OF_DEV_AUXDATA("stericsson,db8500-prcmu", 0x80157000, "db8500-prcmu",
+ &db8500_prcmu_pdata),
/* Requires device name bindings. */
OF_DEV_AUXDATA("stericsson,nmk-pinctrl", U8500_PRCMU_BASE,
"pinctrl-db8500", NULL),
@@ -341,8 +339,7 @@
.map_io = u8500_map_io,
.init_irq = ux500_init_irq,
/* we re-use nomadik timer here */
- .timer = &ux500_timer,
- .handle_irq = gic_handle_irq,
+ .init_time = ux500_timer_init,
.init_machine = u8500_init_machine,
.init_late = NULL,
.dt_compat = stericsson_dt_platform_compat,
diff --git a/arch/arm/mach-ux500/cpu.c b/arch/arm/mach-ux500/cpu.c
index d4dcec53..537870d 100644
--- a/arch/arm/mach-ux500/cpu.c
+++ b/arch/arm/mach-ux500/cpu.c
@@ -17,9 +17,10 @@
#include <linux/of.h>
#include <linux/of_irq.h>
#include <linux/irq.h>
+#include <linux/irqchip.h>
+#include <linux/irqchip/arm-gic.h>
#include <linux/platform_data/clk-ux500.h>
-#include <asm/hardware/gic.h>
#include <asm/mach/map.h>
#include <mach/hardware.h>
@@ -27,6 +28,7 @@
#include <mach/devices.h>
#include "board-mop500.h"
+#include "id.h"
void __iomem *_PRCMU_BASE;
@@ -42,11 +44,6 @@
* This feels fragile because it depends on the gpio device getting probed
* _before_ any device uses the gpio interrupts.
*/
-static const struct of_device_id ux500_dt_irq_match[] = {
- { .compatible = "arm,cortex-a9-gic", .data = gic_of_init, },
- {},
-};
-
void __init ux500_init_irq(void)
{
void __iomem *dist_base;
@@ -62,7 +59,7 @@
#ifdef CONFIG_OF
if (of_have_populated_dt())
- of_irq_init(ux500_dt_irq_match);
+ irqchip_init();
else
#endif
gic_init(0, 29, dist_base, cpu_base);
diff --git a/arch/arm/mach-ux500/devices-db8500.c b/arch/arm/mach-ux500/devices-db8500.c
index 318d490..f3d9419 100644
--- a/arch/arm/mach-ux500/devices-db8500.c
+++ b/arch/arm/mach-ux500/devices-db8500.c
@@ -13,11 +13,13 @@
#include <linux/amba/bus.h>
#include <linux/amba/pl022.h>
#include <linux/platform_data/dma-ste-dma40.h>
+#include <linux/mfd/dbx500-prcmu.h>
#include <mach/hardware.h>
#include <mach/setup.h>
#include <mach/irqs.h>
+#include "devices-db8500.h"
#include "ste-dma40-db8500.h"
static struct resource dma40_resources[] = {
@@ -194,3 +196,45 @@
.num_resources = ARRAY_SIZE(keypad_resources),
.resource = keypad_resources,
};
+
+struct prcmu_pdata db8500_prcmu_pdata = {
+ .ab_platdata = &ab8500_platdata,
+ .version_offset = DB8500_PRCMU_FW_VERSION_OFFSET,
+ .legacy_offset = DB8500_PRCMU_LEGACY_OFFSET,
+};
+
+static struct resource db8500_prcmu_res[] = {
+ {
+ .name = "prcmu",
+ .start = U8500_PRCMU_BASE,
+ .end = U8500_PRCMU_BASE + SZ_8K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .name = "prcmu-tcdm",
+ .start = U8500_PRCMU_TCDM_BASE,
+ .end = U8500_PRCMU_TCDM_BASE + SZ_4K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .name = "irq",
+ .start = IRQ_DB8500_PRCMU1,
+ .end = IRQ_DB8500_PRCMU1,
+ .flags = IORESOURCE_IRQ,
+ },
+ {
+ .name = "prcmu-tcpm",
+ .start = U8500_PRCMU_TCPM_BASE,
+ .end = U8500_PRCMU_TCPM_BASE + SZ_4K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+struct platform_device db8500_prcmu_device = {
+ .name = "db8500-prcmu",
+ .resource = db8500_prcmu_res,
+ .num_resources = ARRAY_SIZE(db8500_prcmu_res),
+ .dev = {
+ .platform_data = &db8500_prcmu_pdata,
+ },
+};
diff --git a/arch/arm/mach-ux500/devices-db8500.h b/arch/arm/mach-ux500/devices-db8500.h
index a5e05f6..dbcb35c 100644
--- a/arch/arm/mach-ux500/devices-db8500.h
+++ b/arch/arm/mach-ux500/devices-db8500.h
@@ -14,6 +14,11 @@
struct ske_keypad_platform_data;
struct pl022_ssp_controller;
+struct platform_device;
+
+extern struct ab8500_platform_data ab8500_platdata;
+extern struct prcmu_pdata db8500_prcmu_pdata;
+extern struct platform_device db8500_prcmu_device;
static inline struct platform_device *
db8500_add_ske_keypad(struct device *parent,
diff --git a/arch/arm/mach-ux500/id.c b/arch/arm/mach-ux500/id.c
index d157992..9f95184 100644
--- a/arch/arm/mach-ux500/id.c
+++ b/arch/arm/mach-ux500/id.c
@@ -17,6 +17,8 @@
#include <mach/hardware.h>
#include <mach/setup.h>
+#include "id.h"
+
struct dbx500_asic_id dbx500_id;
static unsigned int ux500_read_asicid(phys_addr_t addr)
diff --git a/arch/arm/mach-ux500/include/mach/id.h b/arch/arm/mach-ux500/id.h
similarity index 85%
rename from arch/arm/mach-ux500/include/mach/id.h
rename to arch/arm/mach-ux500/id.h
index 9c42642..bcc58a8 100644
--- a/arch/arm/mach-ux500/include/mach/id.h
+++ b/arch/arm/mach-ux500/id.h
@@ -61,9 +61,14 @@
return dbx500_partnumber() == 0x8540;
}
+static inline bool __attribute_const__ cpu_is_u8580(void)
+{
+ return dbx500_partnumber() == 0x8580;
+}
+
static inline bool cpu_is_ux540_family(void)
{
- return cpu_is_u9540() || cpu_is_u8540();
+ return cpu_is_u9540() || cpu_is_u8540() || cpu_is_u8580();
}
/*
@@ -115,6 +120,20 @@
return (cpu_is_u8500() && !cpu_is_u8500v10() && !cpu_is_u8500v11());
}
+/*
+ * 8540 revisions
+ */
+
+static inline bool __attribute_const__ cpu_is_u8540v10(void)
+{
+ return cpu_is_u8540() && dbx500_revision() == 0xA0;
+}
+
+static inline bool __attribute_const__ cpu_is_u8580v10(void)
+{
+ return cpu_is_u8580() && dbx500_revision() == 0xA0;
+}
+
static inline bool ux500_is_svp(void)
{
return false;
diff --git a/arch/arm/mach-ux500/include/mach/hardware.h b/arch/arm/mach-ux500/include/mach/hardware.h
index 28d16e7..5201dda 100644
--- a/arch/arm/mach-ux500/include/mach/hardware.h
+++ b/arch/arm/mach-ux500/include/mach/hardware.h
@@ -39,7 +39,6 @@
#ifndef __ASSEMBLY__
-#include <mach/id.h>
extern void __iomem *_PRCMU_BASE;
#define ARRAY_AND_SIZE(x) (x), ARRAY_SIZE(x)
diff --git a/arch/arm/mach-ux500/include/mach/setup.h b/arch/arm/mach-ux500/include/mach/setup.h
index 6be4c4d..bddce2b 100644
--- a/arch/arm/mach-ux500/include/mach/setup.h
+++ b/arch/arm/mach-ux500/include/mach/setup.h
@@ -28,8 +28,7 @@
struct amba_device;
extern void __init amba_add_devices(struct amba_device *devs[], int num);
-struct sys_timer;
-extern struct sys_timer ux500_timer;
+extern void ux500_timer_init(void);
#define __IO_DEV_DESC(x, sz) { \
.virtual = IO_ADDRESS(x), \
diff --git a/arch/arm/mach-ux500/include/mach/uncompress.h b/arch/arm/mach-ux500/include/mach/uncompress.h
index d60ecd1..36969d5 100644
--- a/arch/arm/mach-ux500/include/mach/uncompress.h
+++ b/arch/arm/mach-ux500/include/mach/uncompress.h
@@ -54,6 +54,4 @@
ux500_uart_base = (void __iomem *)U8500_UART2_BASE;
}
-#define arch_decomp_wdog() /* nothing to do here */
-
#endif /* __ASM_ARCH_UNCOMPRESS_H */
diff --git a/arch/arm/mach-ux500/platsmp.c b/arch/arm/mach-ux500/platsmp.c
index 3db7782..18f7af3 100644
--- a/arch/arm/mach-ux500/platsmp.c
+++ b/arch/arm/mach-ux500/platsmp.c
@@ -16,14 +16,17 @@
#include <linux/device.h>
#include <linux/smp.h>
#include <linux/io.h>
+#include <linux/irqchip/arm-gic.h>
#include <asm/cacheflush.h>
-#include <asm/hardware/gic.h>
#include <asm/smp_plat.h>
#include <asm/smp_scu.h>
+
#include <mach/hardware.h>
#include <mach/setup.h>
+#include "id.h"
+
/* This is called from headsmp.S to wakeup the secondary core */
extern void u8500_secondary_startup(void);
@@ -91,7 +94,7 @@
*/
write_pen_release(cpu_logical_map(cpu));
- smp_send_reschedule(cpu);
+ arch_send_wakeup_ipi_mask(cpumask_of(cpu));
timeout = jiffies + (1 * HZ);
while (time_before(jiffies, timeout)) {
@@ -155,8 +158,6 @@
for (i = 0; i < ncores; i++)
set_cpu_possible(i, true);
-
- set_smp_cross_call(gic_raise_softirq);
}
static void __init ux500_smp_prepare_cpus(unsigned int max_cpus)
diff --git a/arch/arm/mach-ux500/timer.c b/arch/arm/mach-ux500/timer.c
index 875309a..a6af0b8 100644
--- a/arch/arm/mach-ux500/timer.c
+++ b/arch/arm/mach-ux500/timer.c
@@ -17,6 +17,8 @@
#include <mach/hardware.h>
#include <mach/irqs.h>
+#include "id.h"
+
#ifdef CONFIG_HAVE_ARM_TWD
static DEFINE_TWD_LOCAL_TIMER(u8500_twd_local_timer,
U8500_TWD_BASE, IRQ_LOCALTIMER);
@@ -46,7 +48,7 @@
{ },
};
-static void __init ux500_timer_init(void)
+void __init ux500_timer_init(void)
{
void __iomem *mtu_timer_base;
void __iomem *prcmu_timer_base;
@@ -99,14 +101,3 @@
clksrc_dbx500_prcmu_init(prcmu_timer_base);
ux500_twd_init();
}
-
-static void ux500_timer_reset(void)
-{
- nmdk_clkevt_reset();
- nmdk_clksrc_reset();
-}
-
-struct sys_timer ux500_timer = {
- .init = ux500_timer_init,
- .resume = ux500_timer_reset,
-};
diff --git a/arch/arm/mach-versatile/core.c b/arch/arm/mach-versatile/core.c
index 43478c2..25160ae 100644
--- a/arch/arm/mach-versatile/core.c
+++ b/arch/arm/mach-versatile/core.c
@@ -32,6 +32,7 @@
#include <linux/amba/mmci.h>
#include <linux/amba/pl022.h>
#include <linux/io.h>
+#include <linux/irqchip/arm-vic.h>
#include <linux/irqchip/versatile-fpga.h>
#include <linux/gfp.h>
#include <linux/clkdev.h>
@@ -41,7 +42,6 @@
#include <asm/irq.h>
#include <asm/hardware/arm_timer.h>
#include <asm/hardware/icst.h>
-#include <asm/hardware/vic.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
@@ -783,7 +783,7 @@
/*
* Set up timer interrupt, and return the current time in seconds.
*/
-static void __init versatile_timer_init(void)
+void __init versatile_timer_init(void)
{
u32 val;
@@ -810,8 +810,3 @@
sp804_clocksource_init(TIMER3_VA_BASE, "timer3");
sp804_clockevents_init(TIMER0_VA_BASE, IRQ_TIMERINT0_1, "timer0");
}
-
-struct sys_timer versatile_timer = {
- .init = versatile_timer_init,
-};
-
diff --git a/arch/arm/mach-versatile/core.h b/arch/arm/mach-versatile/core.h
index 683e607..5c1b87d 100644
--- a/arch/arm/mach-versatile/core.h
+++ b/arch/arm/mach-versatile/core.h
@@ -29,7 +29,7 @@
extern void __init versatile_init_early(void);
extern void __init versatile_init_irq(void);
extern void __init versatile_map_io(void);
-extern struct sys_timer versatile_timer;
+extern void versatile_timer_init(void);
extern void versatile_restart(char, const char *);
extern unsigned int mmc_status(struct device *dev);
#ifdef CONFIG_OF
diff --git a/arch/arm/mach-versatile/include/mach/uncompress.h b/arch/arm/mach-versatile/include/mach/uncompress.h
index 3dd0048..986e3d3 100644
--- a/arch/arm/mach-versatile/include/mach/uncompress.h
+++ b/arch/arm/mach-versatile/include/mach/uncompress.h
@@ -43,4 +43,3 @@
* nothing to do
*/
#define arch_decomp_setup()
-#define arch_decomp_wdog()
diff --git a/arch/arm/mach-versatile/versatile_ab.c b/arch/arm/mach-versatile/versatile_ab.c
index 98f6549..1caef10 100644
--- a/arch/arm/mach-versatile/versatile_ab.c
+++ b/arch/arm/mach-versatile/versatile_ab.c
@@ -26,7 +26,6 @@
#include <mach/hardware.h>
#include <asm/irq.h>
-#include <asm/hardware/vic.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
@@ -39,8 +38,7 @@
.map_io = versatile_map_io,
.init_early = versatile_init_early,
.init_irq = versatile_init_irq,
- .handle_irq = vic_handle_irq,
- .timer = &versatile_timer,
+ .init_time = versatile_timer_init,
.init_machine = versatile_init,
.restart = versatile_restart,
MACHINE_END
diff --git a/arch/arm/mach-versatile/versatile_dt.c b/arch/arm/mach-versatile/versatile_dt.c
index ae5ad3c..2558f2e 100644
--- a/arch/arm/mach-versatile/versatile_dt.c
+++ b/arch/arm/mach-versatile/versatile_dt.c
@@ -24,7 +24,6 @@
#include <linux/init.h>
#include <linux/of_irq.h>
#include <linux/of_platform.h>
-#include <asm/hardware/vic.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
@@ -46,8 +45,7 @@
.map_io = versatile_map_io,
.init_early = versatile_init_early,
.init_irq = versatile_init_irq,
- .handle_irq = vic_handle_irq,
- .timer = &versatile_timer,
+ .init_time = versatile_timer_init,
.init_machine = versatile_dt_init,
.dt_compat = versatile_dt_match,
.restart = versatile_restart,
diff --git a/arch/arm/mach-versatile/versatile_pb.c b/arch/arm/mach-versatile/versatile_pb.c
index 1973833..611d140 100644
--- a/arch/arm/mach-versatile/versatile_pb.c
+++ b/arch/arm/mach-versatile/versatile_pb.c
@@ -27,7 +27,6 @@
#include <linux/io.h>
#include <mach/hardware.h>
-#include <asm/hardware/vic.h>
#include <asm/irq.h>
#include <asm/mach-types.h>
@@ -107,8 +106,7 @@
.map_io = versatile_map_io,
.init_early = versatile_init_early,
.init_irq = versatile_init_irq,
- .handle_irq = vic_handle_irq,
- .timer = &versatile_timer,
+ .init_time = versatile_timer_init,
.init_machine = versatile_pb_init,
.restart = versatile_restart,
MACHINE_END
diff --git a/arch/arm/mach-vexpress/ct-ca9x4.c b/arch/arm/mach-vexpress/ct-ca9x4.c
index 60838dd..6f34497 100644
--- a/arch/arm/mach-vexpress/ct-ca9x4.c
+++ b/arch/arm/mach-vexpress/ct-ca9x4.c
@@ -10,10 +10,10 @@
#include <linux/amba/clcd.h>
#include <linux/clkdev.h>
#include <linux/vexpress.h>
+#include <linux/irqchip/arm-gic.h>
#include <asm/hardware/arm_timer.h>
#include <asm/hardware/cache-l2x0.h>
-#include <asm/hardware/gic.h>
#include <asm/smp_scu.h>
#include <asm/smp_twd.h>
@@ -182,8 +182,6 @@
for (i = 0; i < ncores; ++i)
set_cpu_possible(i, true);
-
- set_smp_cross_call(gic_raise_softirq);
}
static void __init ct_ca9x4_smp_enable(unsigned int max_cpus)
diff --git a/arch/arm/mach-vexpress/platsmp.c b/arch/arm/mach-vexpress/platsmp.c
index c5d70de..dc1ace5 100644
--- a/arch/arm/mach-vexpress/platsmp.c
+++ b/arch/arm/mach-vexpress/platsmp.c
@@ -16,7 +16,6 @@
#include <linux/vexpress.h>
#include <asm/smp_scu.h>
-#include <asm/hardware/gic.h>
#include <asm/mach/map.h>
#include <mach/motherboard.h>
@@ -128,8 +127,6 @@
for (i = 0; i < ncores; ++i)
set_cpu_possible(i, true);
-
- set_smp_cross_call(gic_raise_softirq);
}
static void __init vexpress_dt_smp_prepare_cpus(unsigned int max_cpus)
diff --git a/arch/arm/mach-vexpress/v2m.c b/arch/arm/mach-vexpress/v2m.c
index 011661a..915683c 100644
--- a/arch/arm/mach-vexpress/v2m.c
+++ b/arch/arm/mach-vexpress/v2m.c
@@ -7,6 +7,7 @@
#include <linux/io.h>
#include <linux/smp.h>
#include <linux/init.h>
+#include <linux/irqchip.h>
#include <linux/of_address.h>
#include <linux/of_fdt.h>
#include <linux/of_irq.h>
@@ -30,7 +31,6 @@
#include <asm/mach/time.h>
#include <asm/hardware/arm_timer.h>
#include <asm/hardware/cache-l2x0.h>
-#include <asm/hardware/gic.h>
#include <asm/hardware/timer-sp.h>
#include <mach/ct-ca9x4.h>
@@ -291,10 +291,6 @@
v2m_sp804_init(ioremap(V2M_TIMER01, SZ_4K), IRQ_V2M_TIMER0);
}
-static struct sys_timer v2m_timer = {
- .init = v2m_timer_init,
-};
-
static void __init v2m_init_early(void)
{
if (ct_desc->init_early)
@@ -376,8 +372,7 @@
.map_io = v2m_map_io,
.init_early = v2m_init_early,
.init_irq = v2m_init_irq,
- .timer = &v2m_timer,
- .handle_irq = gic_handle_irq,
+ .init_time = v2m_timer_init,
.init_machine = v2m_init,
.restart = vexpress_restart,
MACHINE_END
@@ -434,16 +429,6 @@
}
}
-static struct of_device_id vexpress_irq_match[] __initdata = {
- { .compatible = "arm,cortex-a9-gic", .data = gic_of_init, },
- {}
-};
-
-static void __init v2m_dt_init_irq(void)
-{
- of_irq_init(vexpress_irq_match);
-}
-
static void __init v2m_dt_timer_init(void)
{
struct device_node *node = NULL;
@@ -468,10 +453,6 @@
24000000);
}
-static struct sys_timer v2m_dt_timer = {
- .init = v2m_dt_timer_init,
-};
-
static const struct of_device_id v2m_dt_bus_match[] __initconst = {
{ .compatible = "simple-bus", },
{ .compatible = "arm,amba-bus", },
@@ -497,9 +478,8 @@
.smp = smp_ops(vexpress_smp_ops),
.map_io = v2m_dt_map_io,
.init_early = v2m_dt_init_early,
- .init_irq = v2m_dt_init_irq,
- .timer = &v2m_dt_timer,
+ .init_irq = irqchip_init,
+ .init_time = v2m_dt_timer_init,
.init_machine = v2m_dt_init,
- .handle_irq = gic_handle_irq,
.restart = vexpress_restart,
MACHINE_END
diff --git a/arch/arm/mach-vt8500/Kconfig b/arch/arm/mach-vt8500/Kconfig
index 2ed0b7d..9adcb9e 100644
--- a/arch/arm/mach-vt8500/Kconfig
+++ b/arch/arm/mach-vt8500/Kconfig
@@ -4,9 +4,10 @@
select ARCH_HAS_CPUFREQ
select ARCH_REQUIRE_GPIOLIB
select CLKDEV_LOOKUP
+ select CLKSRC_OF
select CPU_ARM926T
select GENERIC_CLOCKEVENTS
- select GENERIC_GPIO
select HAVE_CLK
+ select VT8500_TIMER
help
Support for VIA/WonderMedia VT8500/WM85xx System-on-Chip.
diff --git a/arch/arm/mach-vt8500/Makefile b/arch/arm/mach-vt8500/Makefile
index e035251..92ceb24 100644
--- a/arch/arm/mach-vt8500/Makefile
+++ b/arch/arm/mach-vt8500/Makefile
@@ -1 +1 @@
-obj-$(CONFIG_ARCH_VT8500) += irq.o timer.o vt8500.o
+obj-$(CONFIG_ARCH_VT8500) += irq.o vt8500.o
diff --git a/arch/arm/mach-vt8500/common.h b/arch/arm/mach-vt8500/common.h
index 6f2b843..77611a6 100644
--- a/arch/arm/mach-vt8500/common.h
+++ b/arch/arm/mach-vt8500/common.h
@@ -18,7 +18,6 @@
#include <linux/of.h>
-void __init vt8500_timer_init(void);
int __init vt8500_irq_init(struct device_node *node,
struct device_node *parent);
diff --git a/arch/arm/mach-vt8500/include/mach/uncompress.h b/arch/arm/mach-vt8500/include/mach/uncompress.h
index e6e81fd..5b4f19e 100644
--- a/arch/arm/mach-vt8500/include/mach/uncompress.h
+++ b/arch/arm/mach-vt8500/include/mach/uncompress.h
@@ -34,4 +34,3 @@
* nothing to do
*/
#define arch_decomp_setup()
-#define arch_decomp_wdog()
diff --git a/arch/arm/mach-vt8500/vt8500.c b/arch/arm/mach-vt8500/vt8500.c
index 3c66d48..fe99b70 100644
--- a/arch/arm/mach-vt8500/vt8500.c
+++ b/arch/arm/mach-vt8500/vt8500.c
@@ -18,6 +18,7 @@
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
+#include <linux/clocksource.h>
#include <linux/io.h>
#include <linux/pm.h>
@@ -175,10 +176,6 @@
of_irq_init(vt8500_irq_match);
};
-static struct sys_timer vt8500_timer = {
- .init = vt8500_timer_init,
-};
-
static const char * const vt8500_dt_compat[] = {
"via,vt8500",
"wm,wm8650",
@@ -189,8 +186,8 @@
.dt_compat = vt8500_dt_compat,
.map_io = vt8500_map_io,
.init_irq = vt8500_init_irq,
- .timer = &vt8500_timer,
.init_machine = vt8500_init,
+ .init_time = clocksource_of_init,
.restart = vt8500_restart,
.handle_irq = vt8500_handle_irq,
MACHINE_END
diff --git a/arch/arm/mach-w90x900/include/mach/uncompress.h b/arch/arm/mach-w90x900/include/mach/uncompress.h
index 0313021..4b7c324 100644
--- a/arch/arm/mach-w90x900/include/mach/uncompress.h
+++ b/arch/arm/mach-w90x900/include/mach/uncompress.h
@@ -24,8 +24,6 @@
#include <mach/map.h>
#include <linux/serial_reg.h>
-#define arch_decomp_wdog()
-
#define TX_DONE (UART_LSR_TEMT | UART_LSR_THRE)
static volatile u32 * const uart_base = (u32 *)UART0_PA;
diff --git a/arch/arm/mach-w90x900/mach-nuc910evb.c b/arch/arm/mach-w90x900/mach-nuc910evb.c
index b4243e4..92f1c97 100644
--- a/arch/arm/mach-w90x900/mach-nuc910evb.c
+++ b/arch/arm/mach-w90x900/mach-nuc910evb.c
@@ -37,6 +37,6 @@
.map_io = nuc910evb_map_io,
.init_irq = nuc900_init_irq,
.init_machine = nuc910evb_init,
- .timer = &nuc900_timer,
+ .init_time = nuc900_timer_init,
.restart = nuc9xx_restart,
MACHINE_END
diff --git a/arch/arm/mach-w90x900/mach-nuc950evb.c b/arch/arm/mach-w90x900/mach-nuc950evb.c
index 500fe59..26f7189 100644
--- a/arch/arm/mach-w90x900/mach-nuc950evb.c
+++ b/arch/arm/mach-w90x900/mach-nuc950evb.c
@@ -40,6 +40,6 @@
.map_io = nuc950evb_map_io,
.init_irq = nuc900_init_irq,
.init_machine = nuc950evb_init,
- .timer = &nuc900_timer,
+ .init_time = nuc900_timer_init,
.restart = nuc9xx_restart,
MACHINE_END
diff --git a/arch/arm/mach-w90x900/mach-nuc960evb.c b/arch/arm/mach-w90x900/mach-nuc960evb.c
index cbb3adc..9b4e73f 100644
--- a/arch/arm/mach-w90x900/mach-nuc960evb.c
+++ b/arch/arm/mach-w90x900/mach-nuc960evb.c
@@ -37,6 +37,6 @@
.map_io = nuc960evb_map_io,
.init_irq = nuc900_init_irq,
.init_machine = nuc960evb_init,
- .timer = &nuc900_timer,
+ .init_time = nuc900_timer_init,
.restart = nuc9xx_restart,
MACHINE_END
diff --git a/arch/arm/mach-w90x900/nuc9xx.h b/arch/arm/mach-w90x900/nuc9xx.h
index 91acb40..88ef4b2 100644
--- a/arch/arm/mach-w90x900/nuc9xx.h
+++ b/arch/arm/mach-w90x900/nuc9xx.h
@@ -15,10 +15,9 @@
*
*/
struct map_desc;
-struct sys_timer;
/* core initialisation functions */
extern void nuc900_init_irq(void);
-extern struct sys_timer nuc900_timer;
+extern void nuc900_timer_init(void);
extern void nuc9xx_restart(char, const char *);
diff --git a/arch/arm/mach-w90x900/time.c b/arch/arm/mach-w90x900/time.c
index fa27c49..30fbca8 100644
--- a/arch/arm/mach-w90x900/time.c
+++ b/arch/arm/mach-w90x900/time.c
@@ -91,7 +91,6 @@
static struct clock_event_device nuc900_clockevent_device = {
.name = "nuc900-timer0",
- .shift = 32,
.features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
.set_mode = nuc900_clockevent_setmode,
.set_next_event = nuc900_clockevent_setnextevent,
@@ -133,15 +132,10 @@
__raw_writel(RESETINT, REG_TISR);
setup_irq(IRQ_TIMER0, &nuc900_timer0_irq);
- nuc900_clockevent_device.mult = div_sc(rate, NSEC_PER_SEC,
- nuc900_clockevent_device.shift);
- nuc900_clockevent_device.max_delta_ns = clockevent_delta2ns(0xffffffff,
- &nuc900_clockevent_device);
- nuc900_clockevent_device.min_delta_ns = clockevent_delta2ns(0xf,
- &nuc900_clockevent_device);
nuc900_clockevent_device.cpumask = cpumask_of(0);
- clockevents_register_device(&nuc900_clockevent_device);
+ clockevents_config_and_register(&nuc900_clockevent_device, rate,
+ 0xf, 0xffffffff);
}
static void __init nuc900_clocksource_init(void)
@@ -167,12 +161,8 @@
TDR_SHIFT, clocksource_mmio_readl_down);
}
-static void __init nuc900_timer_init(void)
+void __init nuc900_timer_init(void)
{
nuc900_clocksource_init();
nuc900_clockevents_init();
}
-
-struct sys_timer nuc900_timer = {
- .init = nuc900_timer_init,
-};
diff --git a/arch/arm/mach-zynq/common.c b/arch/arm/mach-zynq/common.c
index e16d4be..5c89832 100644
--- a/arch/arm/mach-zynq/common.c
+++ b/arch/arm/mach-zynq/common.c
@@ -24,6 +24,7 @@
#include <linux/of_irq.h>
#include <linux/of_platform.h>
#include <linux/of.h>
+#include <linux/irqchip.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
@@ -31,7 +32,6 @@
#include <asm/mach-types.h>
#include <asm/page.h>
#include <asm/pgtable.h>
-#include <asm/hardware/gic.h>
#include <asm/hardware/cache-l2x0.h>
#include "common.h"
@@ -55,19 +55,6 @@
of_platform_bus_probe(NULL, zynq_of_bus_ids, NULL);
}
-static struct of_device_id irq_match[] __initdata = {
- { .compatible = "arm,cortex-a9-gic", .data = gic_of_init, },
- { }
-};
-
-/**
- * xilinx_irq_init() - Interrupt controller initialization for the GIC.
- */
-static void __init xilinx_irq_init(void)
-{
- of_irq_init(irq_match);
-}
-
#define SCU_PERIPH_PHYS 0xF8F00000
#define SCU_PERIPH_SIZE SZ_8K
#define SCU_PERIPH_VIRT (VMALLOC_END - SCU_PERIPH_SIZE)
@@ -90,16 +77,9 @@
xilinx_zynq_clocks_init(slcr);
- xttcpss_timer_init();
+ xttcps_timer_init();
}
-/*
- * Instantiate and initialize the system timer structure
- */
-static struct sys_timer xttcpss_sys_timer = {
- .init = xilinx_zynq_timer_init,
-};
-
/**
* xilinx_map_io() - Create memory mappings needed for early I/O.
*/
@@ -117,9 +97,8 @@
MACHINE_START(XILINX_EP107, "Xilinx Zynq Platform")
.map_io = xilinx_map_io,
- .init_irq = xilinx_irq_init,
- .handle_irq = gic_handle_irq,
+ .init_irq = irqchip_init,
.init_machine = xilinx_init_machine,
- .timer = &xttcpss_sys_timer,
+ .init_time = xilinx_zynq_timer_init,
.dt_compat = xilinx_dt_match,
MACHINE_END
diff --git a/arch/arm/mach-zynq/common.h b/arch/arm/mach-zynq/common.h
index 954b91c..8b4dbba 100644
--- a/arch/arm/mach-zynq/common.h
+++ b/arch/arm/mach-zynq/common.h
@@ -17,6 +17,6 @@
#ifndef __MACH_ZYNQ_COMMON_H__
#define __MACH_ZYNQ_COMMON_H__
-void __init xttcpss_timer_init(void);
+void __init xttcps_timer_init(void);
#endif
diff --git a/arch/arm/mach-zynq/timer.c b/arch/arm/mach-zynq/timer.c
index de3df28..f9fbc9c 100644
--- a/arch/arm/mach-zynq/timer.c
+++ b/arch/arm/mach-zynq/timer.c
@@ -15,39 +15,29 @@
* GNU General Public License for more details.
*/
-#include <linux/kernel.h>
-#include <linux/init.h>
#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/types.h>
-#include <linux/clocksource.h>
#include <linux/clockchips.h>
-#include <linux/io.h>
-#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/of_irq.h>
#include <linux/slab.h>
#include <linux/clk-provider.h>
-
#include "common.h"
/*
* Timer Register Offset Definitions of Timer 1, Increment base address by 4
* and use same offsets for Timer 2
*/
-#define XTTCPSS_CLK_CNTRL_OFFSET 0x00 /* Clock Control Reg, RW */
-#define XTTCPSS_CNT_CNTRL_OFFSET 0x0C /* Counter Control Reg, RW */
-#define XTTCPSS_COUNT_VAL_OFFSET 0x18 /* Counter Value Reg, RO */
-#define XTTCPSS_INTR_VAL_OFFSET 0x24 /* Interval Count Reg, RW */
-#define XTTCPSS_MATCH_1_OFFSET 0x30 /* Match 1 Value Reg, RW */
-#define XTTCPSS_MATCH_2_OFFSET 0x3C /* Match 2 Value Reg, RW */
-#define XTTCPSS_MATCH_3_OFFSET 0x48 /* Match 3 Value Reg, RW */
-#define XTTCPSS_ISR_OFFSET 0x54 /* Interrupt Status Reg, RO */
-#define XTTCPSS_IER_OFFSET 0x60 /* Interrupt Enable Reg, RW */
+#define XTTCPS_CLK_CNTRL_OFFSET 0x00 /* Clock Control Reg, RW */
+#define XTTCPS_CNT_CNTRL_OFFSET 0x0C /* Counter Control Reg, RW */
+#define XTTCPS_COUNT_VAL_OFFSET 0x18 /* Counter Value Reg, RO */
+#define XTTCPS_INTR_VAL_OFFSET 0x24 /* Interval Count Reg, RW */
+#define XTTCPS_ISR_OFFSET 0x54 /* Interrupt Status Reg, RO */
+#define XTTCPS_IER_OFFSET 0x60 /* Interrupt Enable Reg, RW */
-#define XTTCPSS_CNT_CNTRL_DISABLE_MASK 0x1
+#define XTTCPS_CNT_CNTRL_DISABLE_MASK 0x1
-/* Setup the timers to use pre-scaling, using a fixed value for now that will
+/*
+ * Setup the timers to use pre-scaling, using a fixed value for now that will
* work across most input frequency, but it may need to be more dynamic
*/
#define PRESCALE_EXPONENT 11 /* 2 ^ PRESCALE_EXPONENT = PRESCALE */
@@ -57,72 +47,73 @@
#define CNT_CNTRL_RESET (1<<4)
/**
- * struct xttcpss_timer - This definition defines local timer structure
+ * struct xttcps_timer - This definition defines local timer structure
*
* @base_addr: Base address of timer
**/
-struct xttcpss_timer {
+struct xttcps_timer {
void __iomem *base_addr;
};
-struct xttcpss_timer_clocksource {
- struct xttcpss_timer xttc;
+struct xttcps_timer_clocksource {
+ struct xttcps_timer xttc;
struct clocksource cs;
};
-#define to_xttcpss_timer_clksrc(x) \
- container_of(x, struct xttcpss_timer_clocksource, cs)
+#define to_xttcps_timer_clksrc(x) \
+ container_of(x, struct xttcps_timer_clocksource, cs)
-struct xttcpss_timer_clockevent {
- struct xttcpss_timer xttc;
+struct xttcps_timer_clockevent {
+ struct xttcps_timer xttc;
struct clock_event_device ce;
struct clk *clk;
};
-#define to_xttcpss_timer_clkevent(x) \
- container_of(x, struct xttcpss_timer_clockevent, ce)
+#define to_xttcps_timer_clkevent(x) \
+ container_of(x, struct xttcps_timer_clockevent, ce)
/**
- * xttcpss_set_interval - Set the timer interval value
+ * xttcps_set_interval - Set the timer interval value
*
* @timer: Pointer to the timer instance
* @cycles: Timer interval ticks
**/
-static void xttcpss_set_interval(struct xttcpss_timer *timer,
+static void xttcps_set_interval(struct xttcps_timer *timer,
unsigned long cycles)
{
u32 ctrl_reg;
/* Disable the counter, set the counter value and re-enable counter */
- ctrl_reg = __raw_readl(timer->base_addr + XTTCPSS_CNT_CNTRL_OFFSET);
- ctrl_reg |= XTTCPSS_CNT_CNTRL_DISABLE_MASK;
- __raw_writel(ctrl_reg, timer->base_addr + XTTCPSS_CNT_CNTRL_OFFSET);
+ ctrl_reg = __raw_readl(timer->base_addr + XTTCPS_CNT_CNTRL_OFFSET);
+ ctrl_reg |= XTTCPS_CNT_CNTRL_DISABLE_MASK;
+ __raw_writel(ctrl_reg, timer->base_addr + XTTCPS_CNT_CNTRL_OFFSET);
- __raw_writel(cycles, timer->base_addr + XTTCPSS_INTR_VAL_OFFSET);
+ __raw_writel(cycles, timer->base_addr + XTTCPS_INTR_VAL_OFFSET);
- /* Reset the counter (0x10) so that it starts from 0, one-shot
- mode makes this needed for timing to be right. */
+ /*
+ * Reset the counter (0x10) so that it starts from 0, one-shot
+ * mode makes this needed for timing to be right.
+ */
ctrl_reg |= CNT_CNTRL_RESET;
- ctrl_reg &= ~XTTCPSS_CNT_CNTRL_DISABLE_MASK;
- __raw_writel(ctrl_reg, timer->base_addr + XTTCPSS_CNT_CNTRL_OFFSET);
+ ctrl_reg &= ~XTTCPS_CNT_CNTRL_DISABLE_MASK;
+ __raw_writel(ctrl_reg, timer->base_addr + XTTCPS_CNT_CNTRL_OFFSET);
}
/**
- * xttcpss_clock_event_interrupt - Clock event timer interrupt handler
+ * xttcps_clock_event_interrupt - Clock event timer interrupt handler
*
* @irq: IRQ number of the Timer
- * @dev_id: void pointer to the xttcpss_timer instance
+ * @dev_id: void pointer to the xttcps_timer instance
*
* returns: Always IRQ_HANDLED - success
**/
-static irqreturn_t xttcpss_clock_event_interrupt(int irq, void *dev_id)
+static irqreturn_t xttcps_clock_event_interrupt(int irq, void *dev_id)
{
- struct xttcpss_timer_clockevent *xttce = dev_id;
- struct xttcpss_timer *timer = &xttce->xttc;
+ struct xttcps_timer_clockevent *xttce = dev_id;
+ struct xttcps_timer *timer = &xttce->xttc;
/* Acknowledge the interrupt and call event handler */
- __raw_writel(__raw_readl(timer->base_addr + XTTCPSS_ISR_OFFSET),
- timer->base_addr + XTTCPSS_ISR_OFFSET);
+ __raw_readl(timer->base_addr + XTTCPS_ISR_OFFSET);
xttce->ce.event_handler(&xttce->ce);
@@ -136,46 +127,46 @@
**/
static cycle_t __xttc_clocksource_read(struct clocksource *cs)
{
- struct xttcpss_timer *timer = &to_xttcpss_timer_clksrc(cs)->xttc;
+ struct xttcps_timer *timer = &to_xttcps_timer_clksrc(cs)->xttc;
return (cycle_t)__raw_readl(timer->base_addr +
- XTTCPSS_COUNT_VAL_OFFSET);
+ XTTCPS_COUNT_VAL_OFFSET);
}
/**
- * xttcpss_set_next_event - Sets the time interval for next event
+ * xttcps_set_next_event - Sets the time interval for next event
*
* @cycles: Timer interval ticks
* @evt: Address of clock event instance
*
* returns: Always 0 - success
**/
-static int xttcpss_set_next_event(unsigned long cycles,
+static int xttcps_set_next_event(unsigned long cycles,
struct clock_event_device *evt)
{
- struct xttcpss_timer_clockevent *xttce = to_xttcpss_timer_clkevent(evt);
- struct xttcpss_timer *timer = &xttce->xttc;
+ struct xttcps_timer_clockevent *xttce = to_xttcps_timer_clkevent(evt);
+ struct xttcps_timer *timer = &xttce->xttc;
- xttcpss_set_interval(timer, cycles);
+ xttcps_set_interval(timer, cycles);
return 0;
}
/**
- * xttcpss_set_mode - Sets the mode of timer
+ * xttcps_set_mode - Sets the mode of timer
*
* @mode: Mode to be set
* @evt: Address of clock event instance
**/
-static void xttcpss_set_mode(enum clock_event_mode mode,
+static void xttcps_set_mode(enum clock_event_mode mode,
struct clock_event_device *evt)
{
- struct xttcpss_timer_clockevent *xttce = to_xttcpss_timer_clkevent(evt);
- struct xttcpss_timer *timer = &xttce->xttc;
+ struct xttcps_timer_clockevent *xttce = to_xttcps_timer_clkevent(evt);
+ struct xttcps_timer *timer = &xttce->xttc;
u32 ctrl_reg;
switch (mode) {
case CLOCK_EVT_MODE_PERIODIC:
- xttcpss_set_interval(timer,
+ xttcps_set_interval(timer,
DIV_ROUND_CLOSEST(clk_get_rate(xttce->clk),
PRESCALE * HZ));
break;
@@ -183,17 +174,17 @@
case CLOCK_EVT_MODE_UNUSED:
case CLOCK_EVT_MODE_SHUTDOWN:
ctrl_reg = __raw_readl(timer->base_addr +
- XTTCPSS_CNT_CNTRL_OFFSET);
- ctrl_reg |= XTTCPSS_CNT_CNTRL_DISABLE_MASK;
+ XTTCPS_CNT_CNTRL_OFFSET);
+ ctrl_reg |= XTTCPS_CNT_CNTRL_DISABLE_MASK;
__raw_writel(ctrl_reg,
- timer->base_addr + XTTCPSS_CNT_CNTRL_OFFSET);
+ timer->base_addr + XTTCPS_CNT_CNTRL_OFFSET);
break;
case CLOCK_EVT_MODE_RESUME:
ctrl_reg = __raw_readl(timer->base_addr +
- XTTCPSS_CNT_CNTRL_OFFSET);
- ctrl_reg &= ~XTTCPSS_CNT_CNTRL_DISABLE_MASK;
+ XTTCPS_CNT_CNTRL_OFFSET);
+ ctrl_reg &= ~XTTCPS_CNT_CNTRL_DISABLE_MASK;
__raw_writel(ctrl_reg,
- timer->base_addr + XTTCPSS_CNT_CNTRL_OFFSET);
+ timer->base_addr + XTTCPS_CNT_CNTRL_OFFSET);
break;
}
}
@@ -201,7 +192,7 @@
static void __init zynq_ttc_setup_clocksource(struct device_node *np,
void __iomem *base)
{
- struct xttcpss_timer_clocksource *ttccs;
+ struct xttcps_timer_clocksource *ttccs;
struct clk *clk;
int err;
u32 reg;
@@ -230,11 +221,11 @@
ttccs->cs.mask = CLOCKSOURCE_MASK(16);
ttccs->cs.flags = CLOCK_SOURCE_IS_CONTINUOUS;
- __raw_writel(0x0, ttccs->xttc.base_addr + XTTCPSS_IER_OFFSET);
+ __raw_writel(0x0, ttccs->xttc.base_addr + XTTCPS_IER_OFFSET);
__raw_writel(CLK_CNTRL_PRESCALE | CLK_CNTRL_PRESCALE_EN,
- ttccs->xttc.base_addr + XTTCPSS_CLK_CNTRL_OFFSET);
+ ttccs->xttc.base_addr + XTTCPS_CLK_CNTRL_OFFSET);
__raw_writel(CNT_CNTRL_RESET,
- ttccs->xttc.base_addr + XTTCPSS_CNT_CNTRL_OFFSET);
+ ttccs->xttc.base_addr + XTTCPS_CNT_CNTRL_OFFSET);
err = clocksource_register_hz(&ttccs->cs, clk_get_rate(clk) / PRESCALE);
if (WARN_ON(err))
@@ -244,7 +235,7 @@
static void __init zynq_ttc_setup_clockevent(struct device_node *np,
void __iomem *base)
{
- struct xttcpss_timer_clockevent *ttcce;
+ struct xttcps_timer_clockevent *ttcce;
int err, irq;
u32 reg;
@@ -272,17 +263,18 @@
ttcce->ce.name = np->name;
ttcce->ce.features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT;
- ttcce->ce.set_next_event = xttcpss_set_next_event;
- ttcce->ce.set_mode = xttcpss_set_mode;
+ ttcce->ce.set_next_event = xttcps_set_next_event;
+ ttcce->ce.set_mode = xttcps_set_mode;
ttcce->ce.rating = 200;
ttcce->ce.irq = irq;
+ ttcce->ce.cpumask = cpu_possible_mask;
- __raw_writel(0x23, ttcce->xttc.base_addr + XTTCPSS_CNT_CNTRL_OFFSET);
+ __raw_writel(0x23, ttcce->xttc.base_addr + XTTCPS_CNT_CNTRL_OFFSET);
__raw_writel(CLK_CNTRL_PRESCALE | CLK_CNTRL_PRESCALE_EN,
- ttcce->xttc.base_addr + XTTCPSS_CLK_CNTRL_OFFSET);
- __raw_writel(0x1, ttcce->xttc.base_addr + XTTCPSS_IER_OFFSET);
+ ttcce->xttc.base_addr + XTTCPS_CLK_CNTRL_OFFSET);
+ __raw_writel(0x1, ttcce->xttc.base_addr + XTTCPS_IER_OFFSET);
- err = request_irq(irq, xttcpss_clock_event_interrupt, IRQF_TIMER,
+ err = request_irq(irq, xttcps_clock_event_interrupt, IRQF_TIMER,
np->name, ttcce);
if (WARN_ON(err))
return;
@@ -301,12 +293,12 @@
};
/**
- * xttcpss_timer_init - Initialize the timer
+ * xttcps_timer_init - Initialize the timer
*
* Initializes the timer hardware and register the clock source and clock event
* timers with Linux kernal timer framework
**/
-void __init xttcpss_timer_init(void)
+void __init xttcps_timer_init(void)
{
struct device_node *np;
diff --git a/arch/arm/plat-iop/time.c b/arch/arm/plat-iop/time.c
index cbfbbe4..837a2d5 100644
--- a/arch/arm/plat-iop/time.c
+++ b/arch/arm/plat-iop/time.c
@@ -156,14 +156,9 @@
write_tmr0(timer_ctl & ~IOP_TMR_EN);
write_tisr(1);
setup_irq(IRQ_IOP_TIMER0, &iop_timer_irq);
- clockevents_calc_mult_shift(&iop_clockevent,
- tick_rate, IOP_MIN_RANGE);
- iop_clockevent.max_delta_ns =
- clockevent_delta2ns(0xfffffffe, &iop_clockevent);
- iop_clockevent.min_delta_ns =
- clockevent_delta2ns(0xf, &iop_clockevent);
iop_clockevent.cpumask = cpumask_of(0);
- clockevents_register_device(&iop_clockevent);
+ clockevents_config_and_register(&iop_clockevent, tick_rate,
+ 0xf, 0xfffffffe);
/*
* Set up free-running clocksource timer 1.
diff --git a/arch/arm/plat-orion/time.c b/arch/arm/plat-orion/time.c
index 0f4fa86..5d5ac0f 100644
--- a/arch/arm/plat-orion/time.c
+++ b/arch/arm/plat-orion/time.c
@@ -156,7 +156,6 @@
static struct clock_event_device orion_clkevt = {
.name = "orion_tick",
.features = CLOCK_EVT_FEAT_ONESHOT | CLOCK_EVT_FEAT_PERIODIC,
- .shift = 32,
.rating = 300,
.set_next_event = orion_clkevt_next_event,
.set_mode = orion_clkevt_mode,
@@ -221,9 +220,6 @@
* Setup clockevent timer (interrupt-driven).
*/
setup_irq(irq, &orion_timer_irq);
- orion_clkevt.mult = div_sc(tclk, NSEC_PER_SEC, orion_clkevt.shift);
- orion_clkevt.max_delta_ns = clockevent_delta2ns(0xfffffffe, &orion_clkevt);
- orion_clkevt.min_delta_ns = clockevent_delta2ns(1, &orion_clkevt);
orion_clkevt.cpumask = cpumask_of(0);
- clockevents_register_device(&orion_clkevt);
+ clockevents_config_and_register(&orion_clkevt, tclk, 1, 0xfffffffe);
}
diff --git a/arch/arm/plat-s3c24xx/Kconfig b/arch/arm/plat-s3c24xx/Kconfig
deleted file mode 100644
index eef3b6a..0000000
--- a/arch/arm/plat-s3c24xx/Kconfig
+++ /dev/null
@@ -1,116 +0,0 @@
-# Copyright 2007 Simtec Electronics
-#
-# Licensed under GPLv2
-
-config PLAT_S3C24XX
- bool
- depends on ARCH_S3C24XX
- default y
- select ARCH_REQUIRE_GPIOLIB
- select NO_IOPORT
- select S3C_DEV_NAND
- help
- Base platform code for any Samsung S3C24XX device
-
-if PLAT_S3C24XX
-
-# low-level serial option nodes
-
-config CPU_LLSERIAL_S3C2410_ONLY
- bool
- default y if CPU_LLSERIAL_S3C2410 && !CPU_LLSERIAL_S3C2440
-
-config CPU_LLSERIAL_S3C2440_ONLY
- bool
- default y if CPU_LLSERIAL_S3C2440 && !CPU_LLSERIAL_S3C2410
-
-config CPU_LLSERIAL_S3C2410
- bool
- help
- Selected if there is an S3C2410 (or register compatible) serial
- low-level implementation needed
-
-config CPU_LLSERIAL_S3C2440
- bool
- help
- Selected if there is an S3C2440 (or register compatible) serial
- low-level implementation needed
-
-# code that is shared between a number of the s3c24xx implementations
-
-config S3C2410_CLOCK
- bool
- help
- Clock code for the S3C2410, and similar processors which
- is currently includes the S3C2410, S3C2440, S3C2442.
-
-config S3C24XX_DCLK
- bool
- help
- Clock code for supporting DCLK/CLKOUT on S3C24XX architectures
-
-# gpio configurations
-
-config S3C24XX_GPIO_EXTRA
- int
- default 128 if S3C24XX_GPIO_EXTRA128
- default 64 if S3C24XX_GPIO_EXTRA64
- default 16 if ARCH_H1940
- default 0
-
-config S3C24XX_GPIO_EXTRA64
- bool
- help
- Add an extra 64 gpio numbers to the available GPIO pool. This is
- available for boards that need extra gpios for external devices.
-
-config S3C24XX_GPIO_EXTRA128
- bool
- help
- Add an extra 128 gpio numbers to the available GPIO pool. This is
- available for boards that need extra gpios for external devices.
-
-config S3C24XX_DMA
- bool "S3C2410 DMA support"
- depends on ARCH_S3C24XX
- select S3C_DMA
- help
- S3C2410 DMA support. This is needed for drivers like sound which
- use the S3C2410's DMA system to move data to and from the
- peripheral blocks.
-
-config S3C2410_DMA_DEBUG
- bool "S3C2410 DMA support debug"
- depends on ARCH_S3C24XX && S3C2410_DMA
- help
- Enable debugging output for the DMA code. This option sends info
- to the kernel log, at priority KERN_DEBUG.
-
-# common code for s3c24xx based machines, such as the SMDKs.
-
-# cpu frequency items common between s3c2410 and s3c2440/s3c2442
-
-config S3C2410_IOTIMING
- bool
- depends on CPU_FREQ_S3C24XX
- help
- Internal node to select io timing code that is common to the s3c2410
- and s3c2440/s3c2442 cpu frequency support.
-
-config S3C2410_CPUFREQ_UTILS
- bool
- depends on CPU_FREQ_S3C24XX
- help
- Internal node to select timing code that is common to the s3c2410
- and s3c2440/s3c244 cpu frequency support.
-
-# cpu frequency support common to s3c2412, s3c2413 and s3c2442
-
-config S3C2412_IOTIMING
- bool
- depends on CPU_FREQ_S3C24XX && (CPU_S3C2412 || CPU_S3C2443)
- help
- Intel node to select io timing code that is common to the s3c2412
- and the s3c2443.
-
-endif
diff --git a/arch/arm/plat-s3c24xx/Makefile b/arch/arm/plat-s3c24xx/Makefile
deleted file mode 100644
index 9f60549c..0000000
--- a/arch/arm/plat-s3c24xx/Makefile
+++ /dev/null
@@ -1,27 +0,0 @@
-# arch/arm/plat-s3c24xx/Makefile
-#
-# Copyright 2007 Simtec Electronics
-#
-# Licensed under GPLv2
-
-obj-y :=
-obj-m :=
-obj-n :=
-obj- :=
-
-
-# Core files
-
-obj-y += irq.o
-obj-$(CONFIG_S3C24XX_DCLK) += clock-dclk.o
-
-obj-$(CONFIG_CPU_FREQ_S3C24XX) += cpu-freq.o
-obj-$(CONFIG_CPU_FREQ_S3C24XX_DEBUGFS) += cpu-freq-debugfs.o
-
-# Architecture dependent builds
-
-obj-$(CONFIG_S3C2410_CLOCK) += s3c2410-clock.o
-obj-$(CONFIG_S3C24XX_DMA) += dma.o
-obj-$(CONFIG_S3C2410_IOTIMING) += s3c2410-iotiming.o
-obj-$(CONFIG_S3C2412_IOTIMING) += s3c2412-iotiming.o
-obj-$(CONFIG_S3C2410_CPUFREQ_UTILS) += s3c2410-cpufreq-utils.o
diff --git a/arch/arm/plat-s3c24xx/irq.c b/arch/arm/plat-s3c24xx/irq.c
deleted file mode 100644
index fe57bbb..0000000
--- a/arch/arm/plat-s3c24xx/irq.c
+++ /dev/null
@@ -1,676 +0,0 @@
-/* linux/arch/arm/plat-s3c24xx/irq.c
- *
- * Copyright (c) 2003-2004 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-*/
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/device.h>
-#include <linux/syscore_ops.h>
-
-#include <asm/irq.h>
-#include <asm/mach/irq.h>
-
-#include <plat/regs-irqtype.h>
-
-#include <plat/cpu.h>
-#include <plat/pm.h>
-#include <plat/irq.h>
-
-static void
-s3c_irq_mask(struct irq_data *data)
-{
- unsigned int irqno = data->irq - IRQ_EINT0;
- unsigned long mask;
-
- mask = __raw_readl(S3C2410_INTMSK);
- mask |= 1UL << irqno;
- __raw_writel(mask, S3C2410_INTMSK);
-}
-
-static inline void
-s3c_irq_ack(struct irq_data *data)
-{
- unsigned long bitval = 1UL << (data->irq - IRQ_EINT0);
-
- __raw_writel(bitval, S3C2410_SRCPND);
- __raw_writel(bitval, S3C2410_INTPND);
-}
-
-static inline void
-s3c_irq_maskack(struct irq_data *data)
-{
- unsigned long bitval = 1UL << (data->irq - IRQ_EINT0);
- unsigned long mask;
-
- mask = __raw_readl(S3C2410_INTMSK);
- __raw_writel(mask|bitval, S3C2410_INTMSK);
-
- __raw_writel(bitval, S3C2410_SRCPND);
- __raw_writel(bitval, S3C2410_INTPND);
-}
-
-
-static void
-s3c_irq_unmask(struct irq_data *data)
-{
- unsigned int irqno = data->irq;
- unsigned long mask;
-
- if (irqno != IRQ_TIMER4 && irqno != IRQ_EINT8t23)
- irqdbf2("s3c_irq_unmask %d\n", irqno);
-
- irqno -= IRQ_EINT0;
-
- mask = __raw_readl(S3C2410_INTMSK);
- mask &= ~(1UL << irqno);
- __raw_writel(mask, S3C2410_INTMSK);
-}
-
-struct irq_chip s3c_irq_level_chip = {
- .name = "s3c-level",
- .irq_ack = s3c_irq_maskack,
- .irq_mask = s3c_irq_mask,
- .irq_unmask = s3c_irq_unmask,
- .irq_set_wake = s3c_irq_wake
-};
-
-struct irq_chip s3c_irq_chip = {
- .name = "s3c",
- .irq_ack = s3c_irq_ack,
- .irq_mask = s3c_irq_mask,
- .irq_unmask = s3c_irq_unmask,
- .irq_set_wake = s3c_irq_wake
-};
-
-static void
-s3c_irqext_mask(struct irq_data *data)
-{
- unsigned int irqno = data->irq - EXTINT_OFF;
- unsigned long mask;
-
- mask = __raw_readl(S3C24XX_EINTMASK);
- mask |= ( 1UL << irqno);
- __raw_writel(mask, S3C24XX_EINTMASK);
-}
-
-static void
-s3c_irqext_ack(struct irq_data *data)
-{
- unsigned long req;
- unsigned long bit;
- unsigned long mask;
-
- bit = 1UL << (data->irq - EXTINT_OFF);
-
- mask = __raw_readl(S3C24XX_EINTMASK);
-
- __raw_writel(bit, S3C24XX_EINTPEND);
-
- req = __raw_readl(S3C24XX_EINTPEND);
- req &= ~mask;
-
- /* not sure if we should be acking the parent irq... */
-
- if (data->irq <= IRQ_EINT7) {
- if ((req & 0xf0) == 0)
- s3c_irq_ack(irq_get_irq_data(IRQ_EINT4t7));
- } else {
- if ((req >> 8) == 0)
- s3c_irq_ack(irq_get_irq_data(IRQ_EINT8t23));
- }
-}
-
-static void
-s3c_irqext_unmask(struct irq_data *data)
-{
- unsigned int irqno = data->irq - EXTINT_OFF;
- unsigned long mask;
-
- mask = __raw_readl(S3C24XX_EINTMASK);
- mask &= ~(1UL << irqno);
- __raw_writel(mask, S3C24XX_EINTMASK);
-}
-
-int
-s3c_irqext_type(struct irq_data *data, unsigned int type)
-{
- void __iomem *extint_reg;
- void __iomem *gpcon_reg;
- unsigned long gpcon_offset, extint_offset;
- unsigned long newvalue = 0, value;
-
- if ((data->irq >= IRQ_EINT0) && (data->irq <= IRQ_EINT3)) {
- gpcon_reg = S3C2410_GPFCON;
- extint_reg = S3C24XX_EXTINT0;
- gpcon_offset = (data->irq - IRQ_EINT0) * 2;
- extint_offset = (data->irq - IRQ_EINT0) * 4;
- } else if ((data->irq >= IRQ_EINT4) && (data->irq <= IRQ_EINT7)) {
- gpcon_reg = S3C2410_GPFCON;
- extint_reg = S3C24XX_EXTINT0;
- gpcon_offset = (data->irq - (EXTINT_OFF)) * 2;
- extint_offset = (data->irq - (EXTINT_OFF)) * 4;
- } else if ((data->irq >= IRQ_EINT8) && (data->irq <= IRQ_EINT15)) {
- gpcon_reg = S3C2410_GPGCON;
- extint_reg = S3C24XX_EXTINT1;
- gpcon_offset = (data->irq - IRQ_EINT8) * 2;
- extint_offset = (data->irq - IRQ_EINT8) * 4;
- } else if ((data->irq >= IRQ_EINT16) && (data->irq <= IRQ_EINT23)) {
- gpcon_reg = S3C2410_GPGCON;
- extint_reg = S3C24XX_EXTINT2;
- gpcon_offset = (data->irq - IRQ_EINT8) * 2;
- extint_offset = (data->irq - IRQ_EINT16) * 4;
- } else {
- return -1;
- }
-
- /* Set the GPIO to external interrupt mode */
- value = __raw_readl(gpcon_reg);
- value = (value & ~(3 << gpcon_offset)) | (0x02 << gpcon_offset);
- __raw_writel(value, gpcon_reg);
-
- /* Set the external interrupt to pointed trigger type */
- switch (type)
- {
- case IRQ_TYPE_NONE:
- printk(KERN_WARNING "No edge setting!\n");
- break;
-
- case IRQ_TYPE_EDGE_RISING:
- newvalue = S3C2410_EXTINT_RISEEDGE;
- break;
-
- case IRQ_TYPE_EDGE_FALLING:
- newvalue = S3C2410_EXTINT_FALLEDGE;
- break;
-
- case IRQ_TYPE_EDGE_BOTH:
- newvalue = S3C2410_EXTINT_BOTHEDGE;
- break;
-
- case IRQ_TYPE_LEVEL_LOW:
- newvalue = S3C2410_EXTINT_LOWLEV;
- break;
-
- case IRQ_TYPE_LEVEL_HIGH:
- newvalue = S3C2410_EXTINT_HILEV;
- break;
-
- default:
- printk(KERN_ERR "No such irq type %d", type);
- return -1;
- }
-
- value = __raw_readl(extint_reg);
- value = (value & ~(7 << extint_offset)) | (newvalue << extint_offset);
- __raw_writel(value, extint_reg);
-
- return 0;
-}
-
-static struct irq_chip s3c_irqext_chip = {
- .name = "s3c-ext",
- .irq_mask = s3c_irqext_mask,
- .irq_unmask = s3c_irqext_unmask,
- .irq_ack = s3c_irqext_ack,
- .irq_set_type = s3c_irqext_type,
- .irq_set_wake = s3c_irqext_wake
-};
-
-static struct irq_chip s3c_irq_eint0t4 = {
- .name = "s3c-ext0",
- .irq_ack = s3c_irq_ack,
- .irq_mask = s3c_irq_mask,
- .irq_unmask = s3c_irq_unmask,
- .irq_set_wake = s3c_irq_wake,
- .irq_set_type = s3c_irqext_type,
-};
-
-/* mask values for the parent registers for each of the interrupt types */
-
-#define INTMSK_UART0 (1UL << (IRQ_UART0 - IRQ_EINT0))
-#define INTMSK_UART1 (1UL << (IRQ_UART1 - IRQ_EINT0))
-#define INTMSK_UART2 (1UL << (IRQ_UART2 - IRQ_EINT0))
-#define INTMSK_ADCPARENT (1UL << (IRQ_ADCPARENT - IRQ_EINT0))
-
-
-/* UART0 */
-
-static void
-s3c_irq_uart0_mask(struct irq_data *data)
-{
- s3c_irqsub_mask(data->irq, INTMSK_UART0, 7);
-}
-
-static void
-s3c_irq_uart0_unmask(struct irq_data *data)
-{
- s3c_irqsub_unmask(data->irq, INTMSK_UART0);
-}
-
-static void
-s3c_irq_uart0_ack(struct irq_data *data)
-{
- s3c_irqsub_maskack(data->irq, INTMSK_UART0, 7);
-}
-
-static struct irq_chip s3c_irq_uart0 = {
- .name = "s3c-uart0",
- .irq_mask = s3c_irq_uart0_mask,
- .irq_unmask = s3c_irq_uart0_unmask,
- .irq_ack = s3c_irq_uart0_ack,
-};
-
-/* UART1 */
-
-static void
-s3c_irq_uart1_mask(struct irq_data *data)
-{
- s3c_irqsub_mask(data->irq, INTMSK_UART1, 7 << 3);
-}
-
-static void
-s3c_irq_uart1_unmask(struct irq_data *data)
-{
- s3c_irqsub_unmask(data->irq, INTMSK_UART1);
-}
-
-static void
-s3c_irq_uart1_ack(struct irq_data *data)
-{
- s3c_irqsub_maskack(data->irq, INTMSK_UART1, 7 << 3);
-}
-
-static struct irq_chip s3c_irq_uart1 = {
- .name = "s3c-uart1",
- .irq_mask = s3c_irq_uart1_mask,
- .irq_unmask = s3c_irq_uart1_unmask,
- .irq_ack = s3c_irq_uart1_ack,
-};
-
-/* UART2 */
-
-static void
-s3c_irq_uart2_mask(struct irq_data *data)
-{
- s3c_irqsub_mask(data->irq, INTMSK_UART2, 7 << 6);
-}
-
-static void
-s3c_irq_uart2_unmask(struct irq_data *data)
-{
- s3c_irqsub_unmask(data->irq, INTMSK_UART2);
-}
-
-static void
-s3c_irq_uart2_ack(struct irq_data *data)
-{
- s3c_irqsub_maskack(data->irq, INTMSK_UART2, 7 << 6);
-}
-
-static struct irq_chip s3c_irq_uart2 = {
- .name = "s3c-uart2",
- .irq_mask = s3c_irq_uart2_mask,
- .irq_unmask = s3c_irq_uart2_unmask,
- .irq_ack = s3c_irq_uart2_ack,
-};
-
-/* ADC and Touchscreen */
-
-static void
-s3c_irq_adc_mask(struct irq_data *d)
-{
- s3c_irqsub_mask(d->irq, INTMSK_ADCPARENT, 3 << 9);
-}
-
-static void
-s3c_irq_adc_unmask(struct irq_data *d)
-{
- s3c_irqsub_unmask(d->irq, INTMSK_ADCPARENT);
-}
-
-static void
-s3c_irq_adc_ack(struct irq_data *d)
-{
- s3c_irqsub_ack(d->irq, INTMSK_ADCPARENT, 3 << 9);
-}
-
-static struct irq_chip s3c_irq_adc = {
- .name = "s3c-adc",
- .irq_mask = s3c_irq_adc_mask,
- .irq_unmask = s3c_irq_adc_unmask,
- .irq_ack = s3c_irq_adc_ack,
-};
-
-/* irq demux for adc */
-static void s3c_irq_demux_adc(unsigned int irq,
- struct irq_desc *desc)
-{
- unsigned int subsrc, submsk;
- unsigned int offset = 9;
-
- /* read the current pending interrupts, and the mask
- * for what it is available */
-
- subsrc = __raw_readl(S3C2410_SUBSRCPND);
- submsk = __raw_readl(S3C2410_INTSUBMSK);
-
- subsrc &= ~submsk;
- subsrc >>= offset;
- subsrc &= 3;
-
- if (subsrc != 0) {
- if (subsrc & 1) {
- generic_handle_irq(IRQ_TC);
- }
- if (subsrc & 2) {
- generic_handle_irq(IRQ_ADC);
- }
- }
-}
-
-static void s3c_irq_demux_uart(unsigned int start)
-{
- unsigned int subsrc, submsk;
- unsigned int offset = start - IRQ_S3CUART_RX0;
-
- /* read the current pending interrupts, and the mask
- * for what it is available */
-
- subsrc = __raw_readl(S3C2410_SUBSRCPND);
- submsk = __raw_readl(S3C2410_INTSUBMSK);
-
- irqdbf2("s3c_irq_demux_uart: start=%d (%d), subsrc=0x%08x,0x%08x\n",
- start, offset, subsrc, submsk);
-
- subsrc &= ~submsk;
- subsrc >>= offset;
- subsrc &= 7;
-
- if (subsrc != 0) {
- if (subsrc & 1)
- generic_handle_irq(start);
-
- if (subsrc & 2)
- generic_handle_irq(start+1);
-
- if (subsrc & 4)
- generic_handle_irq(start+2);
- }
-}
-
-/* uart demux entry points */
-
-static void
-s3c_irq_demux_uart0(unsigned int irq,
- struct irq_desc *desc)
-{
- irq = irq;
- s3c_irq_demux_uart(IRQ_S3CUART_RX0);
-}
-
-static void
-s3c_irq_demux_uart1(unsigned int irq,
- struct irq_desc *desc)
-{
- irq = irq;
- s3c_irq_demux_uart(IRQ_S3CUART_RX1);
-}
-
-static void
-s3c_irq_demux_uart2(unsigned int irq,
- struct irq_desc *desc)
-{
- irq = irq;
- s3c_irq_demux_uart(IRQ_S3CUART_RX2);
-}
-
-static void
-s3c_irq_demux_extint8(unsigned int irq,
- struct irq_desc *desc)
-{
- unsigned long eintpnd = __raw_readl(S3C24XX_EINTPEND);
- unsigned long eintmsk = __raw_readl(S3C24XX_EINTMASK);
-
- eintpnd &= ~eintmsk;
- eintpnd &= ~0xff; /* ignore lower irqs */
-
- /* we may as well handle all the pending IRQs here */
-
- while (eintpnd) {
- irq = __ffs(eintpnd);
- eintpnd &= ~(1<<irq);
-
- irq += (IRQ_EINT4 - 4);
- generic_handle_irq(irq);
- }
-
-}
-
-static void
-s3c_irq_demux_extint4t7(unsigned int irq,
- struct irq_desc *desc)
-{
- unsigned long eintpnd = __raw_readl(S3C24XX_EINTPEND);
- unsigned long eintmsk = __raw_readl(S3C24XX_EINTMASK);
-
- eintpnd &= ~eintmsk;
- eintpnd &= 0xff; /* only lower irqs */
-
- /* we may as well handle all the pending IRQs here */
-
- while (eintpnd) {
- irq = __ffs(eintpnd);
- eintpnd &= ~(1<<irq);
-
- irq += (IRQ_EINT4 - 4);
-
- generic_handle_irq(irq);
- }
-}
-
-#ifdef CONFIG_FIQ
-/**
- * s3c24xx_set_fiq - set the FIQ routing
- * @irq: IRQ number to route to FIQ on processor.
- * @on: Whether to route @irq to the FIQ, or to remove the FIQ routing.
- *
- * Change the state of the IRQ to FIQ routing depending on @irq and @on. If
- * @on is true, the @irq is checked to see if it can be routed and the
- * interrupt controller updated to route the IRQ. If @on is false, the FIQ
- * routing is cleared, regardless of which @irq is specified.
- */
-int s3c24xx_set_fiq(unsigned int irq, bool on)
-{
- u32 intmod;
- unsigned offs;
-
- if (on) {
- offs = irq - FIQ_START;
- if (offs > 31)
- return -EINVAL;
-
- intmod = 1 << offs;
- } else {
- intmod = 0;
- }
-
- __raw_writel(intmod, S3C2410_INTMOD);
- return 0;
-}
-
-EXPORT_SYMBOL_GPL(s3c24xx_set_fiq);
-#endif
-
-
-/* s3c24xx_init_irq
- *
- * Initialise S3C2410 IRQ system
-*/
-
-void __init s3c24xx_init_irq(void)
-{
- unsigned long pend;
- unsigned long last;
- int irqno;
- int i;
-
-#ifdef CONFIG_FIQ
- init_FIQ(FIQ_START);
-#endif
-
- irqdbf("s3c2410_init_irq: clearing interrupt status flags\n");
-
- /* first, clear all interrupts pending... */
-
- last = 0;
- for (i = 0; i < 4; i++) {
- pend = __raw_readl(S3C24XX_EINTPEND);
-
- if (pend == 0 || pend == last)
- break;
-
- __raw_writel(pend, S3C24XX_EINTPEND);
- printk("irq: clearing pending ext status %08x\n", (int)pend);
- last = pend;
- }
-
- last = 0;
- for (i = 0; i < 4; i++) {
- pend = __raw_readl(S3C2410_INTPND);
-
- if (pend == 0 || pend == last)
- break;
-
- __raw_writel(pend, S3C2410_SRCPND);
- __raw_writel(pend, S3C2410_INTPND);
- printk("irq: clearing pending status %08x\n", (int)pend);
- last = pend;
- }
-
- last = 0;
- for (i = 0; i < 4; i++) {
- pend = __raw_readl(S3C2410_SUBSRCPND);
-
- if (pend == 0 || pend == last)
- break;
-
- printk("irq: clearing subpending status %08x\n", (int)pend);
- __raw_writel(pend, S3C2410_SUBSRCPND);
- last = pend;
- }
-
- /* register the main interrupts */
-
- irqdbf("s3c2410_init_irq: registering s3c2410 interrupt handlers\n");
-
- for (irqno = IRQ_EINT4t7; irqno <= IRQ_ADCPARENT; irqno++) {
- /* set all the s3c2410 internal irqs */
-
- switch (irqno) {
- /* deal with the special IRQs (cascaded) */
-
- case IRQ_EINT4t7:
- case IRQ_EINT8t23:
- case IRQ_UART0:
- case IRQ_UART1:
- case IRQ_UART2:
- case IRQ_ADCPARENT:
- irq_set_chip_and_handler(irqno, &s3c_irq_level_chip,
- handle_level_irq);
- break;
-
- case IRQ_RESERVED6:
- case IRQ_RESERVED24:
- /* no IRQ here */
- break;
-
- default:
- //irqdbf("registering irq %d (s3c irq)\n", irqno);
- irq_set_chip_and_handler(irqno, &s3c_irq_chip,
- handle_edge_irq);
- set_irq_flags(irqno, IRQF_VALID);
- }
- }
-
- /* setup the cascade irq handlers */
-
- irq_set_chained_handler(IRQ_EINT4t7, s3c_irq_demux_extint4t7);
- irq_set_chained_handler(IRQ_EINT8t23, s3c_irq_demux_extint8);
-
- irq_set_chained_handler(IRQ_UART0, s3c_irq_demux_uart0);
- irq_set_chained_handler(IRQ_UART1, s3c_irq_demux_uart1);
- irq_set_chained_handler(IRQ_UART2, s3c_irq_demux_uart2);
- irq_set_chained_handler(IRQ_ADCPARENT, s3c_irq_demux_adc);
-
- /* external interrupts */
-
- for (irqno = IRQ_EINT0; irqno <= IRQ_EINT3; irqno++) {
- irqdbf("registering irq %d (ext int)\n", irqno);
- irq_set_chip_and_handler(irqno, &s3c_irq_eint0t4,
- handle_edge_irq);
- set_irq_flags(irqno, IRQF_VALID);
- }
-
- for (irqno = IRQ_EINT4; irqno <= IRQ_EINT23; irqno++) {
- irqdbf("registering irq %d (extended s3c irq)\n", irqno);
- irq_set_chip_and_handler(irqno, &s3c_irqext_chip,
- handle_edge_irq);
- set_irq_flags(irqno, IRQF_VALID);
- }
-
- /* register the uart interrupts */
-
- irqdbf("s3c2410: registering external interrupts\n");
-
- for (irqno = IRQ_S3CUART_RX0; irqno <= IRQ_S3CUART_ERR0; irqno++) {
- irqdbf("registering irq %d (s3c uart0 irq)\n", irqno);
- irq_set_chip_and_handler(irqno, &s3c_irq_uart0,
- handle_level_irq);
- set_irq_flags(irqno, IRQF_VALID);
- }
-
- for (irqno = IRQ_S3CUART_RX1; irqno <= IRQ_S3CUART_ERR1; irqno++) {
- irqdbf("registering irq %d (s3c uart1 irq)\n", irqno);
- irq_set_chip_and_handler(irqno, &s3c_irq_uart1,
- handle_level_irq);
- set_irq_flags(irqno, IRQF_VALID);
- }
-
- for (irqno = IRQ_S3CUART_RX2; irqno <= IRQ_S3CUART_ERR2; irqno++) {
- irqdbf("registering irq %d (s3c uart2 irq)\n", irqno);
- irq_set_chip_and_handler(irqno, &s3c_irq_uart2,
- handle_level_irq);
- set_irq_flags(irqno, IRQF_VALID);
- }
-
- for (irqno = IRQ_TC; irqno <= IRQ_ADC; irqno++) {
- irqdbf("registering irq %d (s3c adc irq)\n", irqno);
- irq_set_chip_and_handler(irqno, &s3c_irq_adc, handle_edge_irq);
- set_irq_flags(irqno, IRQF_VALID);
- }
-
- irqdbf("s3c2410: registered interrupt handlers\n");
-}
-
-struct syscore_ops s3c24xx_irq_syscore_ops = {
- .suspend = s3c24xx_irq_suspend,
- .resume = s3c24xx_irq_resume,
-};
diff --git a/arch/arm/plat-samsung/include/plat/cpu.h b/arch/arm/plat-samsung/include/plat/cpu.h
index b69e11d..37703ef 100644
--- a/arch/arm/plat-samsung/include/plat/cpu.h
+++ b/arch/arm/plat-samsung/include/plat/cpu.h
@@ -194,8 +194,7 @@
/* timer for 2410/2440 */
-struct sys_timer;
-extern struct sys_timer s3c24xx_timer;
+extern void s3c24xx_timer_init(void);
extern struct syscore_ops s3c2410_pm_syscore_ops;
extern struct syscore_ops s3c2412_pm_syscore_ops;
diff --git a/arch/arm/plat-samsung/include/plat/gpio-core.h b/arch/arm/plat-samsung/include/plat/gpio-core.h
index f7a3ea2..cf5aae5 100644
--- a/arch/arm/plat-samsung/include/plat/gpio-core.h
+++ b/arch/arm/plat-samsung/include/plat/gpio-core.h
@@ -106,7 +106,18 @@
#else
/* machine specific code should provide samsung_gpiolib_getchip */
-#include <mach/gpio-track.h>
+extern struct samsung_gpio_chip s3c24xx_gpios[];
+
+static inline struct samsung_gpio_chip *samsung_gpiolib_getchip(unsigned int pin)
+{
+ struct samsung_gpio_chip *chip;
+
+ if (pin > S3C_GPIO_END)
+ return NULL;
+
+ chip = &s3c24xx_gpios[pin/32];
+ return ((pin - chip->chip.base) < chip->chip.ngpio) ? chip : NULL;
+}
static inline void s3c_gpiolib_track(struct samsung_gpio_chip *chip) { }
#endif
diff --git a/arch/arm/plat-samsung/include/plat/gpio-fns.h b/arch/arm/plat-samsung/include/plat/gpio-fns.h
deleted file mode 100644
index d1ecef0..0000000
--- a/arch/arm/plat-samsung/include/plat/gpio-fns.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <plat/gpio-cfg.h>
diff --git a/arch/arm/plat-samsung/include/plat/pm.h b/arch/arm/plat-samsung/include/plat/pm.h
index 887a0c9..f6fcade 100644
--- a/arch/arm/plat-samsung/include/plat/pm.h
+++ b/arch/arm/plat-samsung/include/plat/pm.h
@@ -109,17 +109,11 @@
#ifdef CONFIG_PM
extern int s3c_irq_wake(struct irq_data *data, unsigned int state);
extern int s3c_irqext_wake(struct irq_data *data, unsigned int state);
-extern int s3c24xx_irq_suspend(void);
-extern void s3c24xx_irq_resume(void);
#else
#define s3c_irq_wake NULL
#define s3c_irqext_wake NULL
-#define s3c24xx_irq_suspend NULL
-#define s3c24xx_irq_resume NULL
#endif
-extern struct syscore_ops s3c24xx_irq_syscore_ops;
-
/* PM debug functions */
#ifdef CONFIG_SAMSUNG_PM_DEBUG
diff --git a/arch/arm/plat-samsung/include/plat/s3c2416.h b/arch/arm/plat-samsung/include/plat/s3c2416.h
index 7178e33..f27399a 100644
--- a/arch/arm/plat-samsung/include/plat/s3c2416.h
+++ b/arch/arm/plat-samsung/include/plat/s3c2416.h
@@ -25,6 +25,7 @@
extern void s3c2416_restart(char mode, const char *cmd);
+extern void s3c2416_init_irq(void);
extern struct syscore_ops s3c2416_irq_syscore_ops;
#else
diff --git a/arch/arm/plat-samsung/include/plat/s3c2443.h b/arch/arm/plat-samsung/include/plat/s3c2443.h
index a5b794f..71b88ec 100644
--- a/arch/arm/plat-samsung/include/plat/s3c2443.h
+++ b/arch/arm/plat-samsung/include/plat/s3c2443.h
@@ -25,6 +25,8 @@
extern int s3c2443_baseclk_add(void);
extern void s3c2443_restart(char mode, const char *cmd);
+
+extern void s3c2443_init_irq(void);
#else
#define s3c2443_init_clocks NULL
#define s3c2443_init_uarts NULL
diff --git a/arch/arm/plat-samsung/include/plat/s5p-time.h b/arch/arm/plat-samsung/include/plat/s5p-time.h
index 3a70aeb..9c96f35 100644
--- a/arch/arm/plat-samsung/include/plat/s5p-time.h
+++ b/arch/arm/plat-samsung/include/plat/s5p-time.h
@@ -36,5 +36,5 @@
extern void __init s5p_set_timer_source(enum s5p_timer_mode event,
enum s5p_timer_mode source);
-extern struct sys_timer s5p_timer;
+extern void s5p_timer_init(void);
#endif /* __ASM_PLAT_S5P_TIME_H */
diff --git a/arch/arm/plat-samsung/include/plat/uncompress.h b/arch/arm/plat-samsung/include/plat/uncompress.h
index 7e068d1..438b248 100644
--- a/arch/arm/plat-samsung/include/plat/uncompress.h
+++ b/arch/arm/plat-samsung/include/plat/uncompress.h
@@ -97,33 +97,6 @@
*((volatile unsigned int __force *)(ad)) = (d); \
} while (0)
-/* CONFIG_S3C_BOOT_WATCHDOG
- *
- * Simple boot-time watchdog setup, to reboot the system if there is
- * any problem with the boot process
-*/
-
-#ifdef CONFIG_S3C_BOOT_WATCHDOG
-
-#define WDOG_COUNT (0xff00)
-
-static inline void arch_decomp_wdog(void)
-{
- __raw_writel(WDOG_COUNT, S3C2410_WTCNT);
-}
-
-static void arch_decomp_wdog_start(void)
-{
- __raw_writel(WDOG_COUNT, S3C2410_WTDAT);
- __raw_writel(WDOG_COUNT, S3C2410_WTCNT);
- __raw_writel(S3C2410_WTCON_ENABLE | S3C2410_WTCON_DIV128 | S3C2410_WTCON_RSTEN | S3C2410_WTCON_PRESCALE(0x80), S3C2410_WTCON);
-}
-
-#else
-#define arch_decomp_wdog_start()
-#define arch_decomp_wdog()
-#endif
-
#ifdef CONFIG_S3C_BOOT_ERROR_RESET
static void arch_decomp_error(const char *x)
@@ -173,7 +146,6 @@
*/
arch_detect_cpu();
- arch_decomp_wdog_start();
/* Enable the UART FIFOs if they where not enabled and our
* configuration says we should turn them on.
diff --git a/arch/arm/plat-samsung/s5p-irq-eint.c b/arch/arm/plat-samsung/s5p-irq-eint.c
index 33bd3f3..faa6516 100644
--- a/arch/arm/plat-samsung/s5p-irq-eint.c
+++ b/arch/arm/plat-samsung/s5p-irq-eint.c
@@ -15,8 +15,7 @@
#include <linux/io.h>
#include <linux/device.h>
#include <linux/gpio.h>
-
-#include <asm/hardware/vic.h>
+#include <linux/irqchip/arm-vic.h>
#include <plat/regs-irqtype.h>
diff --git a/arch/arm/plat-samsung/s5p-irq.c b/arch/arm/plat-samsung/s5p-irq.c
index dfb47d6..103e371 100644
--- a/arch/arm/plat-samsung/s5p-irq.c
+++ b/arch/arm/plat-samsung/s5p-irq.c
@@ -13,8 +13,7 @@
#include <linux/interrupt.h>
#include <linux/irq.h>
#include <linux/io.h>
-
-#include <asm/hardware/vic.h>
+#include <linux/irqchip/arm-vic.h>
#include <mach/map.h>
#include <plat/regs-timer.h>
diff --git a/arch/arm/plat-samsung/s5p-time.c b/arch/arm/plat-samsung/s5p-time.c
index 028b6e8..e92510c 100644
--- a/arch/arm/plat-samsung/s5p-time.c
+++ b/arch/arm/plat-samsung/s5p-time.c
@@ -274,15 +274,8 @@
clock_rate = clk_get_rate(tin_event);
clock_count_per_tick = clock_rate / HZ;
- clockevents_calc_mult_shift(&time_event_device,
- clock_rate, S5PTIMER_MIN_RANGE);
- time_event_device.max_delta_ns =
- clockevent_delta2ns(-1, &time_event_device);
- time_event_device.min_delta_ns =
- clockevent_delta2ns(1, &time_event_device);
-
time_event_device.cpumask = cpumask_of(0);
- clockevents_register_device(&time_event_device);
+ clockevents_config_and_register(&time_event_device, clock_rate, 1, -1);
irq_number = timer_source.event_id + IRQ_TIMER0;
setup_irq(irq_number, &s5p_clock_event_irq);
@@ -393,13 +386,9 @@
clk_enable(tin_source);
}
-static void __init s5p_timer_init(void)
+void __init s5p_timer_init(void)
{
s5p_timer_resources();
s5p_clockevent_init();
s5p_clocksource_init();
}
-
-struct sys_timer s5p_timer = {
- .init = s5p_timer_init,
-};
diff --git a/arch/arm/plat-samsung/time.c b/arch/arm/plat-samsung/time.c
index 60552e2..73defd0 100644
--- a/arch/arm/plat-samsung/time.c
+++ b/arch/arm/plat-samsung/time.c
@@ -27,6 +27,7 @@
#include <linux/clk.h>
#include <linux/io.h>
#include <linux/platform_device.h>
+#include <linux/syscore_ops.h>
#include <asm/mach-types.h>
@@ -95,7 +96,7 @@
* IRQs are disabled before entering here from do_gettimeofday()
*/
-static unsigned long s3c2410_gettimeoffset (void)
+static u32 s3c2410_gettimeoffset(void)
{
unsigned long tdone;
unsigned long tval;
@@ -120,7 +121,7 @@
tdone += timer_startval;
}
- return timer_ticks_to_usec(tdone);
+ return timer_ticks_to_usec(tdone) * 1000;
}
@@ -271,15 +272,16 @@
clk_enable(tin);
}
-static void __init s3c2410_timer_init(void)
+static struct syscore_ops s3c24xx_syscore_ops = {
+ .resume = s3c2410_timer_setup,
+};
+
+void __init s3c24xx_timer_init(void)
{
+ arch_gettimeoffset = s3c2410_gettimeoffset;
+
s3c2410_timer_resources();
s3c2410_timer_setup();
setup_irq(IRQ_TIMER4, &s3c2410_timer_irq);
+ register_syscore_ops(&s3c24xx_syscore_ops);
}
-
-struct sys_timer s3c24xx_timer = {
- .init = s3c2410_timer_init,
- .offset = s3c2410_gettimeoffset,
- .resume = s3c2410_timer_setup
-};
diff --git a/arch/arm/plat-spear/include/plat/uncompress.h b/arch/arm/plat-spear/include/plat/uncompress.h
index 2ce6cb1..51b2dc9 100644
--- a/arch/arm/plat-spear/include/plat/uncompress.h
+++ b/arch/arm/plat-spear/include/plat/uncompress.h
@@ -38,6 +38,5 @@
* nothing to do
*/
#define arch_decomp_setup()
-#define arch_decomp_wdog()
#endif /* __PLAT_UNCOMPRESS_H */
diff --git a/arch/arm/plat-spear/time.c b/arch/arm/plat-spear/time.c
index 03321af..bd5c53c 100644
--- a/arch/arm/plat-spear/time.c
+++ b/arch/arm/plat-spear/time.c
@@ -186,15 +186,9 @@
tick_rate = clk_get_rate(gpt_clk);
tick_rate >>= CTRL_PRESCALER16;
- clockevents_calc_mult_shift(&clkevt, tick_rate, SPEAR_MIN_RANGE);
-
- clkevt.max_delta_ns = clockevent_delta2ns(0xfff0,
- &clkevt);
- clkevt.min_delta_ns = clockevent_delta2ns(3, &clkevt);
-
clkevt.cpumask = cpumask_of(0);
- clockevents_register_device(&clkevt);
+ clockevents_config_and_register(&clkevt, tick_rate, 3, 0xfff0);
setup_irq(irq, &spear_timer_irq);
}
diff --git a/arch/arm/plat-versatile/platsmp.c b/arch/arm/plat-versatile/platsmp.c
index 04ca493..f2ac155 100644
--- a/arch/arm/plat-versatile/platsmp.c
+++ b/arch/arm/plat-versatile/platsmp.c
@@ -14,10 +14,10 @@
#include <linux/device.h>
#include <linux/jiffies.h>
#include <linux/smp.h>
+#include <linux/irqchip/arm-gic.h>
#include <asm/cacheflush.h>
#include <asm/smp_plat.h>
-#include <asm/hardware/gic.h>
/*
* Write pen_release in a way that is guaranteed to be visible to all
@@ -79,7 +79,7 @@
* the boot monitor to read the system wide flags register,
* and branch to the address found there.
*/
- gic_raise_softirq(cpumask_of(cpu), 0);
+ arch_send_wakeup_ipi_mask(cpumask_of(cpu));
timeout = jiffies + (1 * HZ);
while (time_before(jiffies, timeout)) {
diff --git a/arch/blackfin/kernel/time.c b/arch/blackfin/kernel/time.c
index 2310b24..3126b92 100644
--- a/arch/blackfin/kernel/time.c
+++ b/arch/blackfin/kernel/time.c
@@ -85,7 +85,7 @@
/*
* Should return useconds since last timer tick
*/
-u32 arch_gettimeoffset(void)
+static u32 blackfin_gettimeoffset(void)
{
unsigned long offset;
unsigned long clocks_per_jiffy;
@@ -141,6 +141,10 @@
void __init time_init(void)
{
+#ifdef CONFIG_ARCH_USES_GETTIMEOFFSET
+ arch_gettimeoffset = blackfin_gettimeoffset;
+#endif
+
#ifdef CONFIG_RTC_DRV_BFIN
/* [#2663] hack to filter junk RTC values that would cause
* userspace to have to deal with time values greater than
diff --git a/arch/cris/arch-v10/kernel/time.c b/arch/cris/arch-v10/kernel/time.c
index bcffcb6..fce7c54 100644
--- a/arch/cris/arch-v10/kernel/time.c
+++ b/arch/cris/arch-v10/kernel/time.c
@@ -55,9 +55,9 @@
return ns;
}
-unsigned long do_slow_gettimeoffset(void)
+static u32 cris_v10_gettimeoffset(void)
{
- unsigned long count;
+ u32 count;
/* The timer interrupt comes from Etrax timer 0. In order to get
* better precision, we check the current value. It might have
@@ -65,8 +65,8 @@
*/
count = *R_TIMER0_DATA;
- /* Convert timer value to usec */
- return (TIMER0_DIV - count) * ((NSEC_PER_SEC/1000)/HZ)/TIMER0_DIV;
+ /* Convert timer value to nsec */
+ return (TIMER0_DIV - count) * (NSEC_PER_SEC/HZ)/TIMER0_DIV;
}
/* Excerpt from the Etrax100 HSDD about the built-in watchdog:
@@ -191,6 +191,8 @@
void __init
time_init(void)
{
+ arch_gettimeoffset = cris_v10_gettimeoffset;
+
/* probe for the RTC and read it if it exists
* Before the RTC can be probed the loops_per_usec variable needs
* to be initialized to make usleep work. A better value for
diff --git a/arch/cris/kernel/time.c b/arch/cris/kernel/time.c
index 277ffc4..fe6acda 100644
--- a/arch/cris/kernel/time.c
+++ b/arch/cris/kernel/time.c
@@ -39,17 +39,6 @@
extern unsigned long loops_per_jiffy; /* init/main.c */
unsigned long loops_per_usec;
-
-#ifdef CONFIG_ARCH_USES_GETTIMEOFFSET
-extern unsigned long do_slow_gettimeoffset(void);
-static unsigned long (*do_gettimeoffset)(void) = do_slow_gettimeoffset;
-
-u32 arch_gettimeoffset(void)
-{
- return do_gettimeoffset() * 1000;
-}
-#endif
-
int set_rtc_mmss(unsigned long nowtime)
{
D(printk(KERN_DEBUG "set_rtc_mmss(%lu)\n", nowtime));
diff --git a/arch/m32r/kernel/time.c b/arch/m32r/kernel/time.c
index 84dd040..1a15f81 100644
--- a/arch/m32r/kernel/time.c
+++ b/arch/m32r/kernel/time.c
@@ -57,7 +57,7 @@
static unsigned long latch;
-u32 arch_gettimeoffset(void)
+static u32 m32r_gettimeoffset(void)
{
unsigned long elapsed_time = 0; /* [us] */
@@ -165,6 +165,8 @@
void __init time_init(void)
{
+ arch_gettimeoffset = m32r_gettimeoffset;
+
#if defined(CONFIG_CHIP_M32102) || defined(CONFIG_CHIP_XNUX2) \
|| defined(CONFIG_CHIP_VDEC2) || defined(CONFIG_CHIP_M32700) \
|| defined(CONFIG_CHIP_OPSP) || defined(CONFIG_CHIP_M32104)
diff --git a/arch/m68k/amiga/config.c b/arch/m68k/amiga/config.c
index ee01b7a..b819390 100644
--- a/arch/m68k/amiga/config.c
+++ b/arch/m68k/amiga/config.c
@@ -95,7 +95,7 @@
static void amiga_get_model(char *model);
static void amiga_get_hardware_list(struct seq_file *m);
/* amiga specific timer functions */
-static unsigned long amiga_gettimeoffset(void);
+static u32 amiga_gettimeoffset(void);
extern void amiga_mksound(unsigned int count, unsigned int ticks);
static void amiga_reset(void);
extern void amiga_init_sound(void);
@@ -377,7 +377,7 @@
mach_init_IRQ = amiga_init_IRQ;
mach_get_model = amiga_get_model;
mach_get_hardware_list = amiga_get_hardware_list;
- mach_gettimeoffset = amiga_gettimeoffset;
+ arch_gettimeoffset = amiga_gettimeoffset;
/*
* default MAX_DMA=0xffffffff on all machines. If we don't do so, the SCSI
@@ -482,10 +482,10 @@
#define TICK_SIZE 10000
/* This is always executed with interrupts disabled. */
-static unsigned long amiga_gettimeoffset(void)
+static u32 amiga_gettimeoffset(void)
{
unsigned short hi, lo, hi2;
- unsigned long ticks, offset = 0;
+ u32 ticks, offset = 0;
/* read CIA B timer A current value */
hi = ciab.tahi;
@@ -507,7 +507,7 @@
ticks = jiffy_ticks - ticks;
ticks = (10000 * ticks) / jiffy_ticks;
- return ticks + offset;
+ return (ticks + offset) * 1000;
}
static void amiga_reset(void) __noreturn;
diff --git a/arch/m68k/apollo/config.c b/arch/m68k/apollo/config.c
index f5565d6..3ea56b9 100644
--- a/arch/m68k/apollo/config.c
+++ b/arch/m68k/apollo/config.c
@@ -26,7 +26,7 @@
extern void dn_sched_init(irq_handler_t handler);
extern void dn_init_IRQ(void);
-extern unsigned long dn_gettimeoffset(void);
+extern u32 dn_gettimeoffset(void);
extern int dn_dummy_hwclk(int, struct rtc_time *);
extern int dn_dummy_set_clock_mmss(unsigned long);
extern void dn_dummy_reset(void);
@@ -151,7 +151,7 @@
mach_sched_init=dn_sched_init; /* */
mach_init_IRQ=dn_init_IRQ;
- mach_gettimeoffset = dn_gettimeoffset;
+ arch_gettimeoffset = dn_gettimeoffset;
mach_max_dma_address = 0xffffffff;
mach_hwclk = dn_dummy_hwclk; /* */
mach_set_clock_mmss = dn_dummy_set_clock_mmss; /* */
@@ -203,10 +203,9 @@
pr_err("Couldn't register timer interrupt\n");
}
-unsigned long dn_gettimeoffset(void) {
-
+u32 dn_gettimeoffset(void)
+{
return 0xdeadbeef;
-
}
int dn_dummy_hwclk(int op, struct rtc_time *t) {
diff --git a/arch/m68k/atari/config.c b/arch/m68k/atari/config.c
index d8eb327..037c11c 100644
--- a/arch/m68k/atari/config.c
+++ b/arch/m68k/atari/config.c
@@ -74,7 +74,7 @@
/* atari specific timer functions (in time.c) */
extern void atari_sched_init(irq_handler_t);
-extern unsigned long atari_gettimeoffset (void);
+extern u32 atari_gettimeoffset(void);
extern int atari_mste_hwclk (int, struct rtc_time *);
extern int atari_tt_hwclk (int, struct rtc_time *);
extern int atari_mste_set_clock_mmss (unsigned long);
@@ -204,7 +204,7 @@
mach_init_IRQ = atari_init_IRQ;
mach_get_model = atari_get_model;
mach_get_hardware_list = atari_get_hardware_list;
- mach_gettimeoffset = atari_gettimeoffset;
+ arch_gettimeoffset = atari_gettimeoffset;
mach_reset = atari_reset;
mach_max_dma_address = 0xffffff;
#if defined(CONFIG_INPUT_M68K_BEEP) || defined(CONFIG_INPUT_M68K_BEEP_MODULE)
diff --git a/arch/m68k/atari/time.c b/arch/m68k/atari/time.c
index c0cc68a..da8f981 100644
--- a/arch/m68k/atari/time.c
+++ b/arch/m68k/atari/time.c
@@ -42,9 +42,9 @@
#define TICK_SIZE 10000
/* This is always executed with interrupts disabled. */
-unsigned long atari_gettimeoffset (void)
+u32 atari_gettimeoffset(void)
{
- unsigned long ticks, offset = 0;
+ u32 ticks, offset = 0;
/* read MFP timer C current value */
ticks = st_mfp.tim_dt_c;
@@ -57,7 +57,7 @@
ticks = INT_TICKS - ticks;
ticks = ticks * 10000L / INT_TICKS;
- return ticks + offset;
+ return (ticks + offset) * 1000;
}
diff --git a/arch/m68k/bvme6000/config.c b/arch/m68k/bvme6000/config.c
index 0bf850a..8943aa4 100644
--- a/arch/m68k/bvme6000/config.c
+++ b/arch/m68k/bvme6000/config.c
@@ -38,7 +38,7 @@
static void bvme6000_get_model(char *model);
extern void bvme6000_sched_init(irq_handler_t handler);
-extern unsigned long bvme6000_gettimeoffset (void);
+extern u32 bvme6000_gettimeoffset(void);
extern int bvme6000_hwclk (int, struct rtc_time *);
extern int bvme6000_set_clock_mmss (unsigned long);
extern void bvme6000_reset (void);
@@ -110,7 +110,7 @@
mach_max_dma_address = 0xffffffff;
mach_sched_init = bvme6000_sched_init;
mach_init_IRQ = bvme6000_init_IRQ;
- mach_gettimeoffset = bvme6000_gettimeoffset;
+ arch_gettimeoffset = bvme6000_gettimeoffset;
mach_hwclk = bvme6000_hwclk;
mach_set_clock_mmss = bvme6000_set_clock_mmss;
mach_reset = bvme6000_reset;
@@ -216,13 +216,13 @@
* results...
*/
-unsigned long bvme6000_gettimeoffset (void)
+u32 bvme6000_gettimeoffset(void)
{
volatile RtcPtr_t rtc = (RtcPtr_t)BVME_RTC_BASE;
volatile PitRegsPtr pit = (PitRegsPtr)BVME_PIT_BASE;
unsigned char msr = rtc->msr & 0xc0;
unsigned char t1int, t1op;
- unsigned long v = 800000, ov;
+ u32 v = 800000, ov;
rtc->msr = 0; /* Ensure timer registers accessible */
@@ -246,7 +246,7 @@
v += 10000; /* Int pending, + 10ms */
rtc->msr = msr;
- return v;
+ return v * 1000;
}
/*
diff --git a/arch/m68k/hp300/config.c b/arch/m68k/hp300/config.c
index bf16af1..b7609f7 100644
--- a/arch/m68k/hp300/config.c
+++ b/arch/m68k/hp300/config.c
@@ -251,7 +251,7 @@
mach_sched_init = hp300_sched_init;
mach_init_IRQ = hp300_init_IRQ;
mach_get_model = hp300_get_model;
- mach_gettimeoffset = hp300_gettimeoffset;
+ arch_gettimeoffset = hp300_gettimeoffset;
mach_hwclk = hp300_hwclk;
mach_get_ss = hp300_get_ss;
mach_reset = hp300_reset;
diff --git a/arch/m68k/hp300/time.c b/arch/m68k/hp300/time.c
index 29a71be..749543b 100644
--- a/arch/m68k/hp300/time.c
+++ b/arch/m68k/hp300/time.c
@@ -46,7 +46,7 @@
return vector(irq, NULL);
}
-unsigned long hp300_gettimeoffset(void)
+u32 hp300_gettimeoffset(void)
{
/* Read current timer 1 value */
unsigned char lsb, msb1, msb2;
@@ -59,7 +59,7 @@
/* A carry happened while we were reading. Read it again */
lsb = in_8(CLOCKBASE + 7);
ticks = INTVAL - ((msb2 << 8) | lsb);
- return (USECS_PER_JIFFY * ticks) / INTVAL;
+ return ((USECS_PER_JIFFY * ticks) / INTVAL) * 1000;
}
void __init hp300_sched_init(irq_handler_t vector)
diff --git a/arch/m68k/hp300/time.h b/arch/m68k/hp300/time.h
index 7b98242..f5583ec 100644
--- a/arch/m68k/hp300/time.h
+++ b/arch/m68k/hp300/time.h
@@ -1,2 +1,2 @@
extern void hp300_sched_init(irq_handler_t vector);
-extern unsigned long hp300_gettimeoffset(void);
+extern u32 hp300_gettimeoffset(void);
diff --git a/arch/m68k/include/asm/machdep.h b/arch/m68k/include/asm/machdep.h
index 825c1c8..953ca21 100644
--- a/arch/m68k/include/asm/machdep.h
+++ b/arch/m68k/include/asm/machdep.h
@@ -3,6 +3,7 @@
#include <linux/seq_file.h>
#include <linux/interrupt.h>
+#include <linux/time.h>
struct pt_regs;
struct mktime;
@@ -16,7 +17,6 @@
extern void (*mach_get_model) (char *model);
extern void (*mach_get_hardware_list) (struct seq_file *m);
/* machine dependent timer functions */
-extern unsigned long (*mach_gettimeoffset)(void);
extern int (*mach_hwclk)(int, struct rtc_time*);
extern unsigned int (*mach_get_ss)(void);
extern int (*mach_get_rtc_pll)(struct rtc_pll_info *);
diff --git a/arch/m68k/kernel/setup_mm.c b/arch/m68k/kernel/setup_mm.c
index d872ce4..80cfbe5 100644
--- a/arch/m68k/kernel/setup_mm.c
+++ b/arch/m68k/kernel/setup_mm.c
@@ -84,7 +84,6 @@
void (*mach_get_model) (char *model);
void (*mach_get_hardware_list) (struct seq_file *m);
/* machine dependent timer functions */
-unsigned long (*mach_gettimeoffset) (void);
int (*mach_hwclk) (int, struct rtc_time*);
EXPORT_SYMBOL(mach_hwclk);
int (*mach_set_clock_mmss) (unsigned long);
diff --git a/arch/m68k/kernel/time.c b/arch/m68k/kernel/time.c
index 5d0bcaa..bea6bcf 100644
--- a/arch/m68k/kernel/time.c
+++ b/arch/m68k/kernel/time.c
@@ -80,18 +80,8 @@
}
}
-void __init time_init(void)
-{
- mach_sched_init(timer_interrupt);
-}
-
#ifdef CONFIG_ARCH_USES_GETTIMEOFFSET
-u32 arch_gettimeoffset(void)
-{
- return mach_gettimeoffset() * 1000;
-}
-
static int __init rtc_init(void)
{
struct platform_device *pdev;
@@ -106,3 +96,8 @@
module_init(rtc_init);
#endif /* CONFIG_ARCH_USES_GETTIMEOFFSET */
+
+void __init time_init(void)
+{
+ mach_sched_init(timer_interrupt);
+}
diff --git a/arch/m68k/mac/config.c b/arch/m68k/mac/config.c
index d9f62e0..afb95d5 100644
--- a/arch/m68k/mac/config.c
+++ b/arch/m68k/mac/config.c
@@ -52,7 +52,7 @@
static unsigned long mac_orig_videoaddr;
/* Mac specific timer functions */
-extern unsigned long mac_gettimeoffset(void);
+extern u32 mac_gettimeoffset(void);
extern int mac_hwclk(int, struct rtc_time *);
extern int mac_set_clock_mmss(unsigned long);
extern void iop_preinit(void);
@@ -177,7 +177,7 @@
mach_sched_init = mac_sched_init;
mach_init_IRQ = mac_init_IRQ;
mach_get_model = mac_get_model;
- mach_gettimeoffset = mac_gettimeoffset;
+ arch_gettimeoffset = mac_gettimeoffset;
mach_hwclk = mac_hwclk;
mach_set_clock_mmss = mac_set_clock_mmss;
mach_reset = mac_reset;
diff --git a/arch/m68k/mac/via.c b/arch/m68k/mac/via.c
index 2d85662..5d1458b 100644
--- a/arch/m68k/mac/via.c
+++ b/arch/m68k/mac/via.c
@@ -327,7 +327,7 @@
* TBI: get time offset between scheduling timer ticks
*/
-unsigned long mac_gettimeoffset (void)
+u32 mac_gettimeoffset(void)
{
unsigned long ticks, offset = 0;
@@ -341,7 +341,7 @@
ticks = MAC_CLOCK_TICK - ticks;
ticks = ticks * 10000L / MAC_CLOCK_TICK;
- return ticks + offset;
+ return (ticks + offset) * 1000;
}
/*
diff --git a/arch/m68k/mvme147/config.c b/arch/m68k/mvme147/config.c
index a41c091..1c62628 100644
--- a/arch/m68k/mvme147/config.c
+++ b/arch/m68k/mvme147/config.c
@@ -37,7 +37,7 @@
static void mvme147_get_model(char *model);
extern void mvme147_sched_init(irq_handler_t handler);
-extern unsigned long mvme147_gettimeoffset (void);
+extern u32 mvme147_gettimeoffset(void);
extern int mvme147_hwclk (int, struct rtc_time *);
extern int mvme147_set_clock_mmss (unsigned long);
extern void mvme147_reset (void);
@@ -88,7 +88,7 @@
mach_max_dma_address = 0x01000000;
mach_sched_init = mvme147_sched_init;
mach_init_IRQ = mvme147_init_IRQ;
- mach_gettimeoffset = mvme147_gettimeoffset;
+ arch_gettimeoffset = mvme147_gettimeoffset;
mach_hwclk = mvme147_hwclk;
mach_set_clock_mmss = mvme147_set_clock_mmss;
mach_reset = mvme147_reset;
@@ -127,7 +127,7 @@
/* This is always executed with interrupts disabled. */
/* XXX There are race hazards in this code XXX */
-unsigned long mvme147_gettimeoffset (void)
+u32 mvme147_gettimeoffset(void)
{
volatile unsigned short *cp = (volatile unsigned short *)0xfffe1012;
unsigned short n;
@@ -137,7 +137,7 @@
n = *cp;
n -= PCC_TIMER_PRELOAD;
- return (unsigned long)n * 25 / 4;
+ return ((unsigned long)n * 25 / 4) * 1000;
}
static int bcd2int (unsigned char b)
diff --git a/arch/m68k/mvme16x/config.c b/arch/m68k/mvme16x/config.c
index b6d7d8a..080a342 100644
--- a/arch/m68k/mvme16x/config.c
+++ b/arch/m68k/mvme16x/config.c
@@ -43,7 +43,7 @@
static void mvme16x_get_model(char *model);
extern void mvme16x_sched_init(irq_handler_t handler);
-extern unsigned long mvme16x_gettimeoffset (void);
+extern u32 mvme16x_gettimeoffset(void);
extern int mvme16x_hwclk (int, struct rtc_time *);
extern int mvme16x_set_clock_mmss (unsigned long);
extern void mvme16x_reset (void);
@@ -289,7 +289,7 @@
mach_max_dma_address = 0xffffffff;
mach_sched_init = mvme16x_sched_init;
mach_init_IRQ = mvme16x_init_IRQ;
- mach_gettimeoffset = mvme16x_gettimeoffset;
+ arch_gettimeoffset = mvme16x_gettimeoffset;
mach_hwclk = mvme16x_hwclk;
mach_set_clock_mmss = mvme16x_set_clock_mmss;
mach_reset = mvme16x_reset;
@@ -405,9 +405,9 @@
/* This is always executed with interrupts disabled. */
-unsigned long mvme16x_gettimeoffset (void)
+u32 mvme16x_gettimeoffset(void)
{
- return (*(volatile unsigned long *)0xfff42008);
+ return (*(volatile u32 *)0xfff42008) * 1000;
}
int bcd2int (unsigned char b)
diff --git a/arch/m68k/q40/config.c b/arch/m68k/q40/config.c
index 1adb5b7..658542b 100644
--- a/arch/m68k/q40/config.c
+++ b/arch/m68k/q40/config.c
@@ -40,7 +40,7 @@
static void q40_get_model(char *model);
extern void q40_sched_init(irq_handler_t handler);
-static unsigned long q40_gettimeoffset(void);
+static u32 q40_gettimeoffset(void);
static int q40_hwclk(int, struct rtc_time *);
static unsigned int q40_get_ss(void);
static int q40_set_clock_mmss(unsigned long);
@@ -170,7 +170,7 @@
mach_sched_init = q40_sched_init;
mach_init_IRQ = q40_init_IRQ;
- mach_gettimeoffset = q40_gettimeoffset;
+ arch_gettimeoffset = q40_gettimeoffset;
mach_hwclk = q40_hwclk;
mach_get_ss = q40_get_ss;
mach_get_rtc_pll = q40_get_rtc_pll;
@@ -204,9 +204,9 @@
}
-static unsigned long q40_gettimeoffset(void)
+static u32 q40_gettimeoffset(void)
{
- return 5000 * (ql_ticks != 0);
+ return 5000 * (ql_ticks != 0) * 1000;
}
diff --git a/arch/m68k/sun3/config.c b/arch/m68k/sun3/config.c
index 2ca25bd..f59ec58 100644
--- a/arch/m68k/sun3/config.c
+++ b/arch/m68k/sun3/config.c
@@ -36,7 +36,7 @@
char sun3_reserved_pmeg[SUN3_PMEGS_NUM];
-extern unsigned long sun3_gettimeoffset(void);
+extern u32 sun3_gettimeoffset(void);
static void sun3_sched_init(irq_handler_t handler);
extern void sun3_get_model (char* model);
extern int sun3_hwclk(int set, struct rtc_time *t);
@@ -141,7 +141,7 @@
mach_sched_init = sun3_sched_init;
mach_init_IRQ = sun3_init_IRQ;
mach_reset = sun3_reboot;
- mach_gettimeoffset = sun3_gettimeoffset;
+ arch_gettimeoffset = sun3_gettimeoffset;
mach_get_model = sun3_get_model;
mach_hwclk = sun3_hwclk;
mach_halt = sun3_halt;
diff --git a/arch/m68k/sun3/intersil.c b/arch/m68k/sun3/intersil.c
index 94fe801..889829e 100644
--- a/arch/m68k/sun3/intersil.c
+++ b/arch/m68k/sun3/intersil.c
@@ -23,9 +23,9 @@
#define START_VAL (INTERSIL_RUN | INTERSIL_INT_ENABLE | INTERSIL_24H_MODE)
/* does this need to be implemented? */
-unsigned long sun3_gettimeoffset(void)
+u32 sun3_gettimeoffset(void)
{
- return 1;
+ return 1000;
}
diff --git a/arch/m68k/sun3x/config.c b/arch/m68k/sun3x/config.c
index dd306c8..0532d64 100644
--- a/arch/m68k/sun3x/config.c
+++ b/arch/m68k/sun3x/config.c
@@ -48,7 +48,7 @@
mach_sched_init = sun3x_sched_init;
mach_init_IRQ = sun3_init_IRQ;
- mach_gettimeoffset = sun3x_gettimeoffset;
+ arch_gettimeoffset = sun3x_gettimeoffset;
mach_reset = sun3x_reboot;
mach_hwclk = sun3x_hwclk;
diff --git a/arch/m68k/sun3x/time.c b/arch/m68k/sun3x/time.c
index 1d0a724..c8eb08a 100644
--- a/arch/m68k/sun3x/time.c
+++ b/arch/m68k/sun3x/time.c
@@ -71,7 +71,7 @@
return 0;
}
/* Not much we can do here */
-unsigned long sun3x_gettimeoffset (void)
+u32 sun3x_gettimeoffset(void)
{
return 0L;
}
diff --git a/arch/m68k/sun3x/time.h b/arch/m68k/sun3x/time.h
index 6909e12..a4f9126 100644
--- a/arch/m68k/sun3x/time.h
+++ b/arch/m68k/sun3x/time.h
@@ -2,7 +2,7 @@
#define SUN3X_TIME_H
extern int sun3x_hwclk(int set, struct rtc_time *t);
-unsigned long sun3x_gettimeoffset (void);
+u32 sun3x_gettimeoffset(void);
void sun3x_sched_init(irq_handler_t vector);
struct mostek_dt {
diff --git a/drivers/clocksource/Kconfig b/drivers/clocksource/Kconfig
index 7fdcbd3..7d978c1 100644
--- a/drivers/clocksource/Kconfig
+++ b/drivers/clocksource/Kconfig
@@ -1,3 +1,6 @@
+config CLKSRC_OF
+ bool
+
config CLKSRC_I8253
bool
@@ -25,6 +28,9 @@
config SUNXI_TIMER
bool
+config VT8500_TIMER
+ bool
+
config CLKSRC_NOMADIK_MTU
bool
depends on (ARCH_NOMADIK || ARCH_U8500)
diff --git a/drivers/clocksource/Makefile b/drivers/clocksource/Makefile
index f93453d..596c45c 100644
--- a/drivers/clocksource/Makefile
+++ b/drivers/clocksource/Makefile
@@ -1,3 +1,4 @@
+obj-$(CONFIG_CLKSRC_OF) += clksrc-of.o
obj-$(CONFIG_ATMEL_TCB_CLKSRC) += tcb_clksrc.o
obj-$(CONFIG_X86_CYCLONE_TIMER) += cyclone.o
obj-$(CONFIG_X86_PM_TIMER) += acpi_pm.o
@@ -16,5 +17,7 @@
obj-$(CONFIG_ARMADA_370_XP_TIMER) += time-armada-370-xp.o
obj-$(CONFIG_ARCH_BCM2835) += bcm2835_timer.o
obj-$(CONFIG_SUNXI_TIMER) += sunxi_timer.o
+obj-$(CONFIG_ARCH_TEGRA) += tegra20_timer.o
+obj-$(CONFIG_VT8500_TIMER) += vt8500_timer.o
obj-$(CONFIG_CLKSRC_ARM_GENERIC) += arm_generic.o
diff --git a/drivers/clocksource/bcm2835_timer.c b/drivers/clocksource/bcm2835_timer.c
index bc19f12..50c68fe 100644
--- a/drivers/clocksource/bcm2835_timer.c
+++ b/drivers/clocksource/bcm2835_timer.c
@@ -16,7 +16,6 @@
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
-#include <linux/bcm2835_timer.h>
#include <linux/bitops.h>
#include <linux/clockchips.h>
#include <linux/clocksource.h>
@@ -101,7 +100,7 @@
{}
};
-static void __init bcm2835_time_init(void)
+static void __init bcm2835_timer_init(void)
{
struct device_node *node;
void __iomem *base;
@@ -155,7 +154,5 @@
pr_info("bcm2835: system timer (irq = %d)\n", irq);
}
-
-struct sys_timer bcm2835_timer = {
- .init = bcm2835_time_init,
-};
+CLOCKSOURCE_OF_DECLARE(bcm2835, "brcm,bcm2835-system-timer",
+ bcm2835_timer_init);
diff --git a/drivers/clocksource/clksrc-of.c b/drivers/clocksource/clksrc-of.c
new file mode 100644
index 0000000..bdabdaa
--- /dev/null
+++ b/drivers/clocksource/clksrc-of.c
@@ -0,0 +1,35 @@
+/*
+ * Copyright (c) 2012, NVIDIA CORPORATION. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/init.h>
+#include <linux/of.h>
+
+extern struct of_device_id __clksrc_of_table[];
+
+static const struct of_device_id __clksrc_of_table_sentinel
+ __used __section(__clksrc_of_table_end);
+
+void __init clocksource_of_init(void)
+{
+ struct device_node *np;
+ const struct of_device_id *match;
+ void (*init_func)(void);
+
+ for_each_matching_node_and_match(np, __clksrc_of_table, &match) {
+ init_func = match->data;
+ init_func();
+ }
+}
diff --git a/drivers/clocksource/cs5535-clockevt.c b/drivers/clocksource/cs5535-clockevt.c
index d927938..ea21048 100644
--- a/drivers/clocksource/cs5535-clockevt.c
+++ b/drivers/clocksource/cs5535-clockevt.c
@@ -100,7 +100,6 @@
.set_mode = mfgpt_set_mode,
.set_next_event = mfgpt_next_event,
.rating = 250,
- .shift = 32
};
static irqreturn_t mfgpt_tick(int irq, void *dev_id)
@@ -169,17 +168,11 @@
cs5535_mfgpt_write(cs5535_event_clock, MFGPT_REG_SETUP, val);
/* Set up the clock event */
- cs5535_clockevent.mult = div_sc(MFGPT_HZ, NSEC_PER_SEC,
- cs5535_clockevent.shift);
- cs5535_clockevent.min_delta_ns = clockevent_delta2ns(0xF,
- &cs5535_clockevent);
- cs5535_clockevent.max_delta_ns = clockevent_delta2ns(0xFFFE,
- &cs5535_clockevent);
-
printk(KERN_INFO DRV_NAME
": Registering MFGPT timer as a clock event, using IRQ %d\n",
timer_irq);
- clockevents_register_device(&cs5535_clockevent);
+ clockevents_config_and_register(&cs5535_clockevent, MFGPT_HZ,
+ 0xF, 0xFFFE);
return 0;
diff --git a/drivers/clocksource/dw_apb_timer_of.c b/drivers/clocksource/dw_apb_timer_of.c
index f7dba5b..ab09ed3 100644
--- a/drivers/clocksource/dw_apb_timer_of.c
+++ b/drivers/clocksource/dw_apb_timer_of.c
@@ -107,7 +107,7 @@
{},
};
-static void __init timer_init(void)
+void __init dw_apb_timer_init(void)
{
struct device_node *event_timer, *source_timer;
@@ -125,7 +125,3 @@
init_sched_clock();
}
-
-struct sys_timer dw_apb_timer = {
- .init = timer_init,
-};
diff --git a/drivers/clocksource/nomadik-mtu.c b/drivers/clocksource/nomadik-mtu.c
index 8914c3c..025afc6 100644
--- a/drivers/clocksource/nomadik-mtu.c
+++ b/drivers/clocksource/nomadik-mtu.c
@@ -134,12 +134,32 @@
}
}
+void nmdk_clksrc_reset(void)
+{
+ /* Disable */
+ writel(0, mtu_base + MTU_CR(0));
+
+ /* ClockSource: configure load and background-load, and fire it up */
+ writel(nmdk_cycle, mtu_base + MTU_LR(0));
+ writel(nmdk_cycle, mtu_base + MTU_BGLR(0));
+
+ writel(clk_prescale | MTU_CRn_32BITS | MTU_CRn_ENA,
+ mtu_base + MTU_CR(0));
+}
+
+static void nmdk_clkevt_resume(struct clock_event_device *cedev)
+{
+ nmdk_clkevt_reset();
+ nmdk_clksrc_reset();
+}
+
static struct clock_event_device nmdk_clkevt = {
.name = "mtu_1",
.features = CLOCK_EVT_FEAT_ONESHOT | CLOCK_EVT_FEAT_PERIODIC,
.rating = 200,
.set_mode = nmdk_clkevt_mode,
.set_next_event = nmdk_clkevt_next,
+ .resume = nmdk_clkevt_resume,
};
/*
@@ -161,19 +181,6 @@
.dev_id = &nmdk_clkevt,
};
-void nmdk_clksrc_reset(void)
-{
- /* Disable */
- writel(0, mtu_base + MTU_CR(0));
-
- /* ClockSource: configure load and background-load, and fire it up */
- writel(nmdk_cycle, mtu_base + MTU_LR(0));
- writel(nmdk_cycle, mtu_base + MTU_BGLR(0));
-
- writel(clk_prescale | MTU_CRn_32BITS | MTU_CRn_ENA,
- mtu_base + MTU_CR(0));
-}
-
void __init nmdk_timer_init(void __iomem *base, int irq)
{
unsigned long rate;
diff --git a/drivers/clocksource/sunxi_timer.c b/drivers/clocksource/sunxi_timer.c
index 93d09d0..4086b91 100644
--- a/drivers/clocksource/sunxi_timer.c
+++ b/drivers/clocksource/sunxi_timer.c
@@ -74,7 +74,6 @@
static struct clock_event_device sunxi_clockevent = {
.name = "sunxi_tick",
- .shift = 32,
.rating = 300,
.features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
.set_mode = sunxi_clkevt_mode,
@@ -104,7 +103,7 @@
{ }
};
-static void __init sunxi_timer_init(void)
+void __init sunxi_timer_init(void)
{
struct device_node *node;
unsigned long rate = 0;
@@ -154,18 +153,8 @@
val = readl(timer_base + TIMER_CTL_REG);
writel(val | TIMER_CTL_ENABLE, timer_base + TIMER_CTL_REG);
- sunxi_clockevent.mult = div_sc(rate / TIMER_SCAL,
- NSEC_PER_SEC,
- sunxi_clockevent.shift);
- sunxi_clockevent.max_delta_ns = clockevent_delta2ns(0xff,
- &sunxi_clockevent);
- sunxi_clockevent.min_delta_ns = clockevent_delta2ns(0x1,
- &sunxi_clockevent);
sunxi_clockevent.cpumask = cpumask_of(0);
- clockevents_register_device(&sunxi_clockevent);
+ clockevents_config_and_register(&sunxi_clockevent, rate / TIMER_SCAL,
+ 0x1, 0xff);
}
-
-struct sys_timer sunxi_timer = {
- .init = sunxi_timer_init,
-};
diff --git a/drivers/clocksource/tcb_clksrc.c b/drivers/clocksource/tcb_clksrc.c
index 32cb929..8a61872 100644
--- a/drivers/clocksource/tcb_clksrc.c
+++ b/drivers/clocksource/tcb_clksrc.c
@@ -157,7 +157,6 @@
.name = "tc_clkevt",
.features = CLOCK_EVT_FEAT_PERIODIC
| CLOCK_EVT_FEAT_ONESHOT,
- .shift = 32,
/* Should be lower than at91rm9200's system timer */
.rating = 125,
.set_next_event = tc_next_event,
@@ -196,13 +195,9 @@
timer_clock = clk32k_divisor_idx;
- clkevt.clkevt.mult = div_sc(32768, NSEC_PER_SEC, clkevt.clkevt.shift);
- clkevt.clkevt.max_delta_ns
- = clockevent_delta2ns(0xffff, &clkevt.clkevt);
- clkevt.clkevt.min_delta_ns = clockevent_delta2ns(1, &clkevt.clkevt) + 1;
clkevt.clkevt.cpumask = cpumask_of(0);
- clockevents_register_device(&clkevt.clkevt);
+ clockevents_config_and_register(&clkevt.clkevt, 32768, 1, 0xffff);
setup_irq(irq, &tc_irqaction);
}
diff --git a/arch/arm/mach-tegra/timer.c b/drivers/clocksource/tegra20_timer.c
similarity index 92%
rename from arch/arm/mach-tegra/timer.c
rename to drivers/clocksource/tegra20_timer.c
index e4863f3..0bde03f 100644
--- a/arch/arm/mach-tegra/timer.c
+++ b/drivers/clocksource/tegra20_timer.c
@@ -1,6 +1,4 @@
/*
- * arch/arch/mach-tegra/timer.c
- *
* Copyright (C) 2010 Google, Inc.
*
* Author:
@@ -33,8 +31,6 @@
#include <asm/smp_twd.h>
#include <asm/sched_clock.h>
-#include "board.h"
-
#define RTC_SECONDS 0x08
#define RTC_SHADOW_SECONDS 0x0c
#define RTC_MILLISECONDS 0x10
@@ -168,7 +164,7 @@
{}
};
-static void __init tegra_init_timer(void)
+static void __init tegra20_init_timer(void)
{
struct device_node *np;
struct clk *clk;
@@ -183,7 +179,7 @@
timer_reg_base = of_iomap(np, 0);
if (!timer_reg_base) {
- pr_err("Can't map timer registers");
+ pr_err("Can't map timer registers\n");
BUG();
}
@@ -259,23 +255,16 @@
BUG();
}
- clockevents_calc_mult_shift(&tegra_clockevent, 1000000, 5);
- tegra_clockevent.max_delta_ns =
- clockevent_delta2ns(0x1fffffff, &tegra_clockevent);
- tegra_clockevent.min_delta_ns =
- clockevent_delta2ns(0x1, &tegra_clockevent);
tegra_clockevent.cpumask = cpu_all_mask;
tegra_clockevent.irq = tegra_timer_irq.irq;
- clockevents_register_device(&tegra_clockevent);
+ clockevents_config_and_register(&tegra_clockevent, 1000000,
+ 0x1, 0x1fffffff);
#ifdef CONFIG_HAVE_ARM_TWD
twd_local_timer_of_register();
#endif
register_persistent_clock(NULL, tegra_read_persistent_clock);
}
-
-struct sys_timer tegra_sys_timer = {
- .init = tegra_init_timer,
-};
+CLOCKSOURCE_OF_DECLARE(tegra20, "nvidia,tegra20-timer", tegra20_init_timer);
#ifdef CONFIG_PM
static u32 usec_config;
diff --git a/arch/arm/mach-vt8500/timer.c b/drivers/clocksource/vt8500_timer.c
similarity index 93%
rename from arch/arm/mach-vt8500/timer.c
rename to drivers/clocksource/vt8500_timer.c
index 3dd21a4..8efc86b 100644
--- a/arch/arm/mach-vt8500/timer.c
+++ b/drivers/clocksource/vt8500_timer.c
@@ -134,7 +134,7 @@
{ }
};
-void __init vt8500_timer_init(void)
+static void __init vt8500_timer_init(void)
{
struct device_node *np;
int timer_irq;
@@ -168,17 +168,13 @@
pr_err("%s: vt8500_timer_init: clocksource_register failed for %s\n",
__func__, clocksource.name);
- clockevents_calc_mult_shift(&clockevent, VT8500_TIMER_HZ, 4);
-
- /* copy-pasted from mach-msm; no idea */
- clockevent.max_delta_ns =
- clockevent_delta2ns(0xf0000000, &clockevent);
- clockevent.min_delta_ns = clockevent_delta2ns(4, &clockevent);
clockevent.cpumask = cpumask_of(0);
if (setup_irq(timer_irq, &irq))
pr_err("%s: setup_irq failed for %s\n", __func__,
clockevent.name);
- clockevents_register_device(&clockevent);
+ clockevents_config_and_register(&clockevent, VT8500_TIMER_HZ,
+ 4, 0xf0000000);
}
+CLOCKSOURCE_OF_DECLARE(vt8500, "via,vt8500-timer", vt8500_timer_init)
diff --git a/drivers/cpufreq/db8500-cpufreq.c b/drivers/cpufreq/db8500-cpufreq.c
index 79a8486..48a1988 100644
--- a/drivers/cpufreq/db8500-cpufreq.c
+++ b/drivers/cpufreq/db8500-cpufreq.c
@@ -15,7 +15,6 @@
#include <linux/slab.h>
#include <linux/platform_device.h>
#include <linux/clk.h>
-#include <mach/id.h>
static struct cpufreq_frequency_table *freq_table;
static struct clk *armss_clk;
@@ -165,9 +164,6 @@
static int __init db8500_cpufreq_register(void)
{
- if (!cpu_is_u8500_family())
- return -ENODEV;
-
pr_info("cpufreq for DB8500 started\n");
return platform_driver_register(&db8500_cpufreq_plat_driver);
}
diff --git a/drivers/cpufreq/exynos-cpufreq.c b/drivers/cpufreq/exynos-cpufreq.c
index 69b676d..78057a3 100644
--- a/drivers/cpufreq/exynos-cpufreq.c
+++ b/drivers/cpufreq/exynos-cpufreq.c
@@ -18,10 +18,10 @@
#include <linux/cpufreq.h>
#include <linux/suspend.h>
-#include <mach/cpufreq.h>
-
#include <plat/cpu.h>
+#include "exynos-cpufreq.h"
+
static struct exynos_dvfs_info *exynos_info;
static struct regulator *arm_regulator;
diff --git a/arch/arm/mach-exynos/include/mach/cpufreq.h b/drivers/cpufreq/exynos-cpufreq.h
similarity index 95%
rename from arch/arm/mach-exynos/include/mach/cpufreq.h
rename to drivers/cpufreq/exynos-cpufreq.h
index b5d39dd..92b852e 100644
--- a/arch/arm/mach-exynos/include/mach/cpufreq.h
+++ b/drivers/cpufreq/exynos-cpufreq.h
@@ -1,5 +1,4 @@
-/* linux/arch/arm/mach-exynos/include/mach/cpufreq.h
- *
+/*
* Copyright (c) 2010 Samsung Electronics Co., Ltd.
* http://www.samsung.com
*
diff --git a/drivers/cpufreq/exynos4210-cpufreq.c b/drivers/cpufreq/exynos4210-cpufreq.c
index de91755..add7fbe 100644
--- a/drivers/cpufreq/exynos4210-cpufreq.c
+++ b/drivers/cpufreq/exynos4210-cpufreq.c
@@ -18,7 +18,8 @@
#include <linux/cpufreq.h>
#include <mach/regs-clock.h>
-#include <mach/cpufreq.h>
+
+#include "exynos-cpufreq.h"
static struct clk *cpu_clk;
static struct clk *moutcore;
diff --git a/drivers/cpufreq/exynos4x12-cpufreq.c b/drivers/cpufreq/exynos4x12-cpufreq.c
index 0661039..08b7477 100644
--- a/drivers/cpufreq/exynos4x12-cpufreq.c
+++ b/drivers/cpufreq/exynos4x12-cpufreq.c
@@ -18,7 +18,8 @@
#include <linux/cpufreq.h>
#include <mach/regs-clock.h>
-#include <mach/cpufreq.h>
+
+#include "exynos-cpufreq.h"
static struct clk *cpu_clk;
static struct clk *moutcore;
diff --git a/drivers/cpufreq/exynos5250-cpufreq.c b/drivers/cpufreq/exynos5250-cpufreq.c
index b934486..9fae466 100644
--- a/drivers/cpufreq/exynos5250-cpufreq.c
+++ b/drivers/cpufreq/exynos5250-cpufreq.c
@@ -19,7 +19,8 @@
#include <mach/map.h>
#include <mach/regs-clock.h>
-#include <mach/cpufreq.h>
+
+#include "exynos-cpufreq.h"
static struct clk *cpu_clk;
static struct clk *moutcore;
diff --git a/drivers/gpio/gpio-samsung.c b/drivers/gpio/gpio-samsung.c
index b2016ed..b3643ff 100644
--- a/drivers/gpio/gpio-samsung.c
+++ b/drivers/gpio/gpio-samsung.c
@@ -38,7 +38,6 @@
#include <plat/gpio-core.h>
#include <plat/gpio-cfg.h>
#include <plat/gpio-cfg-helpers.h>
-#include <plat/gpio-fns.h>
#include <plat/pm.h>
int samsung_gpio_setpull_updown(struct samsung_gpio_chip *chip,
diff --git a/drivers/irqchip/Kconfig b/drivers/irqchip/Kconfig
index 62ca575..a350969 100644
--- a/drivers/irqchip/Kconfig
+++ b/drivers/irqchip/Kconfig
@@ -1,3 +1,30 @@
+config IRQCHIP
+ def_bool y
+ depends on OF_IRQ
+
+config ARM_GIC
+ bool
+ select IRQ_DOMAIN
+ select MULTI_IRQ_HANDLER
+
+config GIC_NON_BANKED
+ bool
+
+config ARM_VIC
+ bool
+ select IRQ_DOMAIN
+ select MULTI_IRQ_HANDLER
+
+config ARM_VIC_NR
+ int
+ default 4 if ARCH_S5PV210
+ default 3 if ARCH_S5PC100
+ default 2
+ depends on ARM_VIC
+ help
+ The maximum number of VICs available in the system, for
+ power management.
+
config VERSATILE_FPGA_IRQ
bool
select IRQ_DOMAIN
diff --git a/drivers/irqchip/Makefile b/drivers/irqchip/Makefile
index bf4609a..e65fbf2 100644
--- a/drivers/irqchip/Makefile
+++ b/drivers/irqchip/Makefile
@@ -1,4 +1,9 @@
+obj-$(CONFIG_IRQCHIP) += irqchip.o
+
obj-$(CONFIG_ARCH_BCM2835) += irq-bcm2835.o
+obj-$(CONFIG_ARCH_EXYNOS) += exynos-combiner.o
obj-$(CONFIG_ARCH_SUNXI) += irq-sunxi.o
-obj-$(CONFIG_VERSATILE_FPGA_IRQ) += irq-versatile-fpga.o
obj-$(CONFIG_ARCH_SPEAR3XX) += spear-shirq.o
+obj-$(CONFIG_ARM_GIC) += irq-gic.o
+obj-$(CONFIG_ARM_VIC) += irq-vic.o
+obj-$(CONFIG_VERSATILE_FPGA_IRQ) += irq-versatile-fpga.o
diff --git a/drivers/irqchip/exynos-combiner.c b/drivers/irqchip/exynos-combiner.c
new file mode 100644
index 0000000..04d86a9
--- /dev/null
+++ b/drivers/irqchip/exynos-combiner.c
@@ -0,0 +1,230 @@
+/*
+ * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * Combiner irqchip for EXYNOS
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/err.h>
+#include <linux/export.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/irqdomain.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <asm/mach/irq.h>
+
+#include <plat/cpu.h>
+
+#include "irqchip.h"
+
+#define COMBINER_ENABLE_SET 0x0
+#define COMBINER_ENABLE_CLEAR 0x4
+#define COMBINER_INT_STATUS 0xC
+
+static DEFINE_SPINLOCK(irq_controller_lock);
+
+struct combiner_chip_data {
+ unsigned int irq_offset;
+ unsigned int irq_mask;
+ void __iomem *base;
+};
+
+static struct irq_domain *combiner_irq_domain;
+static struct combiner_chip_data combiner_data[MAX_COMBINER_NR];
+
+static inline void __iomem *combiner_base(struct irq_data *data)
+{
+ struct combiner_chip_data *combiner_data =
+ irq_data_get_irq_chip_data(data);
+
+ return combiner_data->base;
+}
+
+static void combiner_mask_irq(struct irq_data *data)
+{
+ u32 mask = 1 << (data->hwirq % 32);
+
+ __raw_writel(mask, combiner_base(data) + COMBINER_ENABLE_CLEAR);
+}
+
+static void combiner_unmask_irq(struct irq_data *data)
+{
+ u32 mask = 1 << (data->hwirq % 32);
+
+ __raw_writel(mask, combiner_base(data) + COMBINER_ENABLE_SET);
+}
+
+static void combiner_handle_cascade_irq(unsigned int irq, struct irq_desc *desc)
+{
+ struct combiner_chip_data *chip_data = irq_get_handler_data(irq);
+ struct irq_chip *chip = irq_get_chip(irq);
+ unsigned int cascade_irq, combiner_irq;
+ unsigned long status;
+
+ chained_irq_enter(chip, desc);
+
+ spin_lock(&irq_controller_lock);
+ status = __raw_readl(chip_data->base + COMBINER_INT_STATUS);
+ spin_unlock(&irq_controller_lock);
+ status &= chip_data->irq_mask;
+
+ if (status == 0)
+ goto out;
+
+ combiner_irq = __ffs(status);
+
+ cascade_irq = combiner_irq + (chip_data->irq_offset & ~31);
+ if (unlikely(cascade_irq >= NR_IRQS))
+ do_bad_IRQ(cascade_irq, desc);
+ else
+ generic_handle_irq(cascade_irq);
+
+ out:
+ chained_irq_exit(chip, desc);
+}
+
+static struct irq_chip combiner_chip = {
+ .name = "COMBINER",
+ .irq_mask = combiner_mask_irq,
+ .irq_unmask = combiner_unmask_irq,
+};
+
+static void __init combiner_cascade_irq(unsigned int combiner_nr, unsigned int irq)
+{
+ unsigned int max_nr;
+
+ if (soc_is_exynos5250())
+ max_nr = EXYNOS5_MAX_COMBINER_NR;
+ else
+ max_nr = EXYNOS4_MAX_COMBINER_NR;
+
+ if (combiner_nr >= max_nr)
+ BUG();
+ if (irq_set_handler_data(irq, &combiner_data[combiner_nr]) != 0)
+ BUG();
+ irq_set_chained_handler(irq, combiner_handle_cascade_irq);
+}
+
+static void __init combiner_init_one(unsigned int combiner_nr,
+ void __iomem *base)
+{
+ combiner_data[combiner_nr].base = base;
+ combiner_data[combiner_nr].irq_offset = irq_find_mapping(
+ combiner_irq_domain, combiner_nr * MAX_IRQ_IN_COMBINER);
+ combiner_data[combiner_nr].irq_mask = 0xff << ((combiner_nr % 4) << 3);
+
+ /* Disable all interrupts */
+ __raw_writel(combiner_data[combiner_nr].irq_mask,
+ base + COMBINER_ENABLE_CLEAR);
+}
+
+#ifdef CONFIG_OF
+static int combiner_irq_domain_xlate(struct irq_domain *d,
+ struct device_node *controller,
+ const u32 *intspec, unsigned int intsize,
+ unsigned long *out_hwirq,
+ unsigned int *out_type)
+{
+ if (d->of_node != controller)
+ return -EINVAL;
+
+ if (intsize < 2)
+ return -EINVAL;
+
+ *out_hwirq = intspec[0] * MAX_IRQ_IN_COMBINER + intspec[1];
+ *out_type = 0;
+
+ return 0;
+}
+#else
+static int combiner_irq_domain_xlate(struct irq_domain *d,
+ struct device_node *controller,
+ const u32 *intspec, unsigned int intsize,
+ unsigned long *out_hwirq,
+ unsigned int *out_type)
+{
+ return -EINVAL;
+}
+#endif
+
+static int combiner_irq_domain_map(struct irq_domain *d, unsigned int irq,
+ irq_hw_number_t hw)
+{
+ irq_set_chip_and_handler(irq, &combiner_chip, handle_level_irq);
+ irq_set_chip_data(irq, &combiner_data[hw >> 3]);
+ set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
+
+ return 0;
+}
+
+static struct irq_domain_ops combiner_irq_domain_ops = {
+ .xlate = combiner_irq_domain_xlate,
+ .map = combiner_irq_domain_map,
+};
+
+void __init combiner_init(void __iomem *combiner_base,
+ struct device_node *np)
+{
+ int i, irq, irq_base;
+ unsigned int max_nr, nr_irq;
+
+ if (np) {
+ if (of_property_read_u32(np, "samsung,combiner-nr", &max_nr)) {
+ pr_warning("%s: number of combiners not specified, "
+ "setting default as %d.\n",
+ __func__, EXYNOS4_MAX_COMBINER_NR);
+ max_nr = EXYNOS4_MAX_COMBINER_NR;
+ }
+ } else {
+ max_nr = soc_is_exynos5250() ? EXYNOS5_MAX_COMBINER_NR :
+ EXYNOS4_MAX_COMBINER_NR;
+ }
+ nr_irq = max_nr * MAX_IRQ_IN_COMBINER;
+
+ irq_base = irq_alloc_descs(COMBINER_IRQ(0, 0), 1, nr_irq, 0);
+ if (IS_ERR_VALUE(irq_base)) {
+ irq_base = COMBINER_IRQ(0, 0);
+ pr_warning("%s: irq desc alloc failed. Continuing with %d as linux irq base\n", __func__, irq_base);
+ }
+
+ combiner_irq_domain = irq_domain_add_legacy(np, nr_irq, irq_base, 0,
+ &combiner_irq_domain_ops, &combiner_data);
+ if (WARN_ON(!combiner_irq_domain)) {
+ pr_warning("%s: irq domain init failed\n", __func__);
+ return;
+ }
+
+ for (i = 0; i < max_nr; i++) {
+ combiner_init_one(i, combiner_base + (i >> 2) * 0x10);
+ irq = IRQ_SPI(i);
+#ifdef CONFIG_OF
+ if (np)
+ irq = irq_of_parse_and_map(np, i);
+#endif
+ combiner_cascade_irq(i, irq);
+ }
+}
+
+#ifdef CONFIG_OF
+static int __init combiner_of_init(struct device_node *np,
+ struct device_node *parent)
+{
+ void __iomem *combiner_base;
+
+ combiner_base = of_iomap(np, 0);
+ if (!combiner_base) {
+ pr_err("%s: failed to map combiner registers\n", __func__);
+ return -ENXIO;
+ }
+
+ combiner_init(combiner_base, np);
+
+ return 0;
+}
+IRQCHIP_DECLARE(exynos4210_combiner, "samsung,exynos4210-combiner",
+ combiner_of_init);
+#endif
diff --git a/arch/arm/common/gic.c b/drivers/irqchip/irq-gic.c
similarity index 96%
rename from arch/arm/common/gic.c
rename to drivers/irqchip/irq-gic.c
index 87dfa90..644d724 100644
--- a/arch/arm/common/gic.c
+++ b/drivers/irqchip/irq-gic.c
@@ -38,12 +38,14 @@
#include <linux/interrupt.h>
#include <linux/percpu.h>
#include <linux/slab.h>
+#include <linux/irqchip/arm-gic.h>
#include <asm/irq.h>
#include <asm/exception.h>
#include <asm/smp_plat.h>
#include <asm/mach/irq.h>
-#include <asm/hardware/gic.h>
+
+#include "irqchip.h"
union gic_base {
void __iomem *common_base;
@@ -276,7 +278,7 @@
#define gic_set_wake NULL
#endif
-asmlinkage void __exception_irq_entry gic_handle_irq(struct pt_regs *regs)
+static asmlinkage void __exception_irq_entry gic_handle_irq(struct pt_regs *regs)
{
u32 irqstat, irqnr;
struct gic_chip_data *gic = &gic_data[0];
@@ -638,6 +640,27 @@
}
#endif
+#ifdef CONFIG_SMP
+void gic_raise_softirq(const struct cpumask *mask, unsigned int irq)
+{
+ int cpu;
+ unsigned long map = 0;
+
+ /* Convert our logical CPU mask into a physical one. */
+ for_each_cpu(cpu, mask)
+ map |= 1 << cpu_logical_map(cpu);
+
+ /*
+ * Ensure that stores to Normal memory are visible to the
+ * other CPUs before issuing the IPI.
+ */
+ dsb();
+
+ /* this always happens on GIC0 */
+ writel_relaxed(map << 16 | irq, gic_data_dist_base(&gic_data[0]) + GIC_DIST_SOFTINT);
+}
+#endif
+
static int gic_irq_domain_map(struct irq_domain *d, unsigned int irq,
irq_hw_number_t hw)
{
@@ -764,6 +787,12 @@
if (WARN_ON(!gic->domain))
return;
+#ifdef CONFIG_SMP
+ set_smp_cross_call(gic_raise_softirq);
+#endif
+
+ set_handle_irq(gic_handle_irq);
+
gic_chip.flags |= gic_arch_extn.flags;
gic_dist_init(gic);
gic_cpu_init(gic);
@@ -777,27 +806,6 @@
gic_cpu_init(&gic_data[gic_nr]);
}
-#ifdef CONFIG_SMP
-void gic_raise_softirq(const struct cpumask *mask, unsigned int irq)
-{
- int cpu;
- unsigned long map = 0;
-
- /* Convert our logical CPU mask into a physical one. */
- for_each_cpu(cpu, mask)
- map |= gic_cpu_map[cpu];
-
- /*
- * Ensure that stores to Normal memory are visible to the
- * other CPUs before issuing the IPI.
- */
- dsb();
-
- /* this always happens on GIC0 */
- writel_relaxed(map << 16 | irq, gic_data_dist_base(&gic_data[0]) + GIC_DIST_SOFTINT);
-}
-#endif
-
#ifdef CONFIG_OF
static int gic_cnt __initdata = 0;
@@ -829,4 +837,9 @@
gic_cnt++;
return 0;
}
+IRQCHIP_DECLARE(cortex_a15_gic, "arm,cortex-a15-gic", gic_of_init);
+IRQCHIP_DECLARE(cortex_a9_gic, "arm,cortex-a9-gic", gic_of_init);
+IRQCHIP_DECLARE(msm_8660_qgic, "qcom,msm-8660-qgic", gic_of_init);
+IRQCHIP_DECLARE(msm_qgic2, "qcom,msm-qgic2", gic_of_init);
+
#endif
diff --git a/arch/arm/common/vic.c b/drivers/irqchip/irq-vic.c
similarity index 91%
rename from arch/arm/common/vic.c
rename to drivers/irqchip/irq-vic.c
index 8f324b9..3cf97aa 100644
--- a/arch/arm/common/vic.c
+++ b/drivers/irqchip/irq-vic.c
@@ -30,10 +30,29 @@
#include <linux/syscore_ops.h>
#include <linux/device.h>
#include <linux/amba/bus.h>
+#include <linux/irqchip/arm-vic.h>
#include <asm/exception.h>
#include <asm/mach/irq.h>
-#include <asm/hardware/vic.h>
+
+#include "irqchip.h"
+
+#define VIC_IRQ_STATUS 0x00
+#define VIC_FIQ_STATUS 0x04
+#define VIC_INT_SELECT 0x0c /* 1 = FIQ, 0 = IRQ */
+#define VIC_INT_SOFT 0x18
+#define VIC_INT_SOFT_CLEAR 0x1c
+#define VIC_PROTECT 0x20
+#define VIC_PL190_VECT_ADDR 0x30 /* PL190 only */
+#define VIC_PL190_DEF_VECT_ADDR 0x34 /* PL190 only */
+
+#define VIC_VECT_ADDR0 0x100 /* 0 to 15 (0..31 PL192) */
+#define VIC_VECT_CNTL0 0x200 /* 0 to 15 (0..31 PL192) */
+#define VIC_ITCR 0x300 /* VIC test control register */
+
+#define VIC_VECT_CNTL_ENABLE (1 << 5)
+
+#define VIC_PL192_VECT_ADDR 0xF00
/**
* struct vic_device - VIC PM device
@@ -66,6 +85,8 @@
static int vic_id;
+static void vic_handle_irq(struct pt_regs *regs);
+
/**
* vic_init2 - common initialisation code
* @base: Base of the VIC.
@@ -182,6 +203,40 @@
return 0;
}
+/*
+ * Handle each interrupt in a single VIC. Returns non-zero if we've
+ * handled at least one interrupt. This reads the status register
+ * before handling each interrupt, which is necessary given that
+ * handle_IRQ may briefly re-enable interrupts for soft IRQ handling.
+ */
+static int handle_one_vic(struct vic_device *vic, struct pt_regs *regs)
+{
+ u32 stat, irq;
+ int handled = 0;
+
+ while ((stat = readl_relaxed(vic->base + VIC_IRQ_STATUS))) {
+ irq = ffs(stat) - 1;
+ handle_IRQ(irq_find_mapping(vic->domain, irq), regs);
+ handled = 1;
+ }
+
+ return handled;
+}
+
+/*
+ * Keep iterating over all registered VIC's until there are no pending
+ * interrupts.
+ */
+static asmlinkage void __exception_irq_entry vic_handle_irq(struct pt_regs *regs)
+{
+ int i, handled;
+
+ do {
+ for (i = 0, handled = 0; i < vic_id; ++i)
+ handled |= handle_one_vic(&vic_devices[i], regs);
+ } while (handled);
+}
+
static struct irq_domain_ops vic_irqdomain_ops = {
.map = vic_irqdomain_map,
.xlate = irq_domain_xlate_onetwocell,
@@ -218,6 +273,7 @@
v->valid_sources = valid_sources;
v->resume_sources = resume_sources;
v->irq = irq;
+ set_handle_irq(vic_handle_irq);
vic_id++;
v->domain = irq_domain_add_simple(node, fls(valid_sources), irq,
&vic_irqdomain_ops, v);
@@ -427,38 +483,7 @@
return 0;
}
+IRQCHIP_DECLARE(arm_pl190_vic, "arm,pl190-vic", vic_of_init);
+IRQCHIP_DECLARE(arm_pl192_vic, "arm,pl192-vic", vic_of_init);
+IRQCHIP_DECLARE(arm_versatile_vic, "arm,versatile-vic", vic_of_init);
#endif /* CONFIG OF */
-
-/*
- * Handle each interrupt in a single VIC. Returns non-zero if we've
- * handled at least one interrupt. This reads the status register
- * before handling each interrupt, which is necessary given that
- * handle_IRQ may briefly re-enable interrupts for soft IRQ handling.
- */
-static int handle_one_vic(struct vic_device *vic, struct pt_regs *regs)
-{
- u32 stat, irq;
- int handled = 0;
-
- while ((stat = readl_relaxed(vic->base + VIC_IRQ_STATUS))) {
- irq = ffs(stat) - 1;
- handle_IRQ(irq_find_mapping(vic->domain, irq), regs);
- handled = 1;
- }
-
- return handled;
-}
-
-/*
- * Keep iterating over all registered VIC's until there are no pending
- * interrupts.
- */
-asmlinkage void __exception_irq_entry vic_handle_irq(struct pt_regs *regs)
-{
- int i, handled;
-
- do {
- for (i = 0, handled = 0; i < vic_id; ++i)
- handled |= handle_one_vic(&vic_devices[i], regs);
- } while (handled);
-}
diff --git a/drivers/irqchip/irqchip.c b/drivers/irqchip/irqchip.c
new file mode 100644
index 0000000..f496afc
--- /dev/null
+++ b/drivers/irqchip/irqchip.c
@@ -0,0 +1,30 @@
+/*
+ * Copyright (C) 2012 Thomas Petazzoni
+ *
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/init.h>
+#include <linux/of_irq.h>
+
+#include "irqchip.h"
+
+/*
+ * This special of_device_id is the sentinel at the end of the
+ * of_device_id[] array of all irqchips. It is automatically placed at
+ * the end of the array by the linker, thanks to being part of a
+ * special section.
+ */
+static const struct of_device_id
+irqchip_of_match_end __used __section(__irqchip_of_end);
+
+extern struct of_device_id __irqchip_begin[];
+
+void __init irqchip_init(void)
+{
+ of_irq_init(__irqchip_begin);
+}
diff --git a/drivers/irqchip/irqchip.h b/drivers/irqchip/irqchip.h
new file mode 100644
index 0000000..e445ba2
--- /dev/null
+++ b/drivers/irqchip/irqchip.h
@@ -0,0 +1,29 @@
+/*
+ * Copyright (C) 2012 Thomas Petazzoni
+ *
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef _IRQCHIP_H
+#define _IRQCHIP_H
+
+/*
+ * This macro must be used by the different irqchip drivers to declare
+ * the association between their DT compatible string and their
+ * initialization function.
+ *
+ * @name: name that must be unique accross all IRQCHIP_DECLARE of the
+ * same file.
+ * @compstr: compatible string of the irqchip driver
+ * @fn: initialization function
+ */
+#define IRQCHIP_DECLARE(name,compstr,fn) \
+ static const struct of_device_id irqchip_of_match_##name \
+ __used __section(__irqchip_of_table) \
+ = { .compatible = compstr, .data = fn }
+
+#endif
diff --git a/drivers/irqchip/spear-shirq.c b/drivers/irqchip/spear-shirq.c
index 80e1d2f..8527743 100644
--- a/drivers/irqchip/spear-shirq.c
+++ b/drivers/irqchip/spear-shirq.c
@@ -25,6 +25,8 @@
#include <linux/of_irq.h>
#include <linux/spinlock.h>
+#include "irqchip.h"
+
static DEFINE_SPINLOCK(lock);
/* spear300 shared irq registers offsets and masks */
@@ -300,6 +302,7 @@
return shirq_init(spear300_shirq_blocks,
ARRAY_SIZE(spear300_shirq_blocks), np);
}
+IRQCHIP_DECLARE(spear300_shirq, "st,spear300-shirq", spear300_shirq_of_init);
int __init spear310_shirq_of_init(struct device_node *np,
struct device_node *parent)
@@ -307,6 +310,7 @@
return shirq_init(spear310_shirq_blocks,
ARRAY_SIZE(spear310_shirq_blocks), np);
}
+IRQCHIP_DECLARE(spear310_shirq, "st,spear310-shirq", spear310_shirq_of_init);
int __init spear320_shirq_of_init(struct device_node *np,
struct device_node *parent)
@@ -314,3 +318,4 @@
return shirq_init(spear320_shirq_blocks,
ARRAY_SIZE(spear320_shirq_blocks), np);
}
+IRQCHIP_DECLARE(spear320_shirq, "st,spear320-shirq", spear320_shirq_of_init);
diff --git a/drivers/mfd/db8500-prcmu.c b/drivers/mfd/db8500-prcmu.c
index 268f45d4..1192518 100644
--- a/drivers/mfd/db8500-prcmu.c
+++ b/drivers/mfd/db8500-prcmu.c
@@ -26,22 +26,18 @@
#include <linux/fs.h>
#include <linux/platform_device.h>
#include <linux/uaccess.h>
+#include <linux/irqchip/arm-gic.h>
#include <linux/mfd/core.h>
#include <linux/mfd/dbx500-prcmu.h>
#include <linux/mfd/abx500/ab8500.h>
#include <linux/regulator/db8500-prcmu.h>
#include <linux/regulator/machine.h>
#include <linux/cpufreq.h>
-#include <asm/hardware/gic.h>
#include <mach/hardware.h>
#include <mach/irqs.h>
#include <mach/db8500-regs.h>
-#include <mach/id.h>
#include "dbx500-prcmu-regs.h"
-/* Offset for the firmware version within the TCPM */
-#define PRCMU_FW_VERSION_OFFSET 0xA4
-
/* Index of different voltages to be used when accessing AVSData */
#define PRCM_AVS_BASE 0x2FC
#define PRCM_AVS_VBB_RET (PRCM_AVS_BASE + 0x0)
@@ -216,10 +212,8 @@
#define PRCM_REQ_MB5_I2C_HW_BITS (PRCM_REQ_MB5 + 0x1)
#define PRCM_REQ_MB5_I2C_REG (PRCM_REQ_MB5 + 0x2)
#define PRCM_REQ_MB5_I2C_VAL (PRCM_REQ_MB5 + 0x3)
-#define PRCMU_I2C_WRITE(slave) \
- (((slave) << 1) | (cpu_is_u8500v2() ? BIT(6) : 0))
-#define PRCMU_I2C_READ(slave) \
- (((slave) << 1) | BIT(0) | (cpu_is_u8500v2() ? BIT(6) : 0))
+#define PRCMU_I2C_WRITE(slave) (((slave) << 1) | BIT(6))
+#define PRCMU_I2C_READ(slave) (((slave) << 1) | BIT(0) | BIT(6))
#define PRCMU_I2C_STOP_EN BIT(3)
/* Mailbox 5 ACKs */
@@ -1049,12 +1043,13 @@
*
* This function sets the operating point of the DDR.
*/
+static bool enable_set_ddr_opp;
int db8500_prcmu_set_ddr_opp(u8 opp)
{
if (opp < DDR_100_OPP || opp > DDR_25_OPP)
return -EINVAL;
/* Changing the DDR OPP can hang the hardware pre-v21 */
- if (cpu_is_u8500v20_or_later() && !cpu_is_u8500v20())
+ if (enable_set_ddr_opp)
writeb(opp, PRCM_DDR_SUBSYS_APE_MINBW);
return 0;
@@ -2706,21 +2701,43 @@
.irq_unmask = prcmu_irq_unmask,
};
-static char *fw_project_name(u8 project)
+static __init char *fw_project_name(u32 project)
{
switch (project) {
case PRCMU_FW_PROJECT_U8500:
return "U8500";
- case PRCMU_FW_PROJECT_U8500_C2:
- return "U8500 C2";
+ case PRCMU_FW_PROJECT_U8400:
+ return "U8400";
case PRCMU_FW_PROJECT_U9500:
return "U9500";
- case PRCMU_FW_PROJECT_U9500_C2:
- return "U9500 C2";
+ case PRCMU_FW_PROJECT_U8500_MBB:
+ return "U8500 MBB";
+ case PRCMU_FW_PROJECT_U8500_C1:
+ return "U8500 C1";
+ case PRCMU_FW_PROJECT_U8500_C2:
+ return "U8500 C2";
+ case PRCMU_FW_PROJECT_U8500_C3:
+ return "U8500 C3";
+ case PRCMU_FW_PROJECT_U8500_C4:
+ return "U8500 C4";
+ case PRCMU_FW_PROJECT_U9500_MBL:
+ return "U9500 MBL";
+ case PRCMU_FW_PROJECT_U8500_MBL:
+ return "U8500 MBL";
+ case PRCMU_FW_PROJECT_U8500_MBL2:
+ return "U8500 MBL2";
case PRCMU_FW_PROJECT_U8520:
- return "U8520";
+ return "U8520 MBL";
case PRCMU_FW_PROJECT_U8420:
return "U8420";
+ case PRCMU_FW_PROJECT_U9540:
+ return "U9540";
+ case PRCMU_FW_PROJECT_A9420:
+ return "A9420";
+ case PRCMU_FW_PROJECT_L8540:
+ return "L8540";
+ case PRCMU_FW_PROJECT_L8580:
+ return "L8580";
default:
return "Unknown";
}
@@ -2766,36 +2783,44 @@
return 0;
}
+static void dbx500_fw_version_init(struct platform_device *pdev,
+ u32 version_offset)
+{
+ struct resource *res;
+ void __iomem *tcpm_base;
+
+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
+ "prcmu-tcpm");
+ if (!res) {
+ dev_err(&pdev->dev,
+ "Error: no prcmu tcpm memory region provided\n");
+ return;
+ }
+ tcpm_base = ioremap(res->start, resource_size(res));
+ if (tcpm_base != NULL) {
+ u32 version;
+
+ version = readl(tcpm_base + version_offset);
+ fw_info.version.project = (version & 0xFF);
+ fw_info.version.api_version = (version >> 8) & 0xFF;
+ fw_info.version.func_version = (version >> 16) & 0xFF;
+ fw_info.version.errata = (version >> 24) & 0xFF;
+ strncpy(fw_info.version.project_name,
+ fw_project_name(fw_info.version.project),
+ PRCMU_FW_PROJECT_NAME_LEN);
+ fw_info.valid = true;
+ pr_info("PRCMU firmware: %s(%d), version %d.%d.%d\n",
+ fw_info.version.project_name,
+ fw_info.version.project,
+ fw_info.version.api_version,
+ fw_info.version.func_version,
+ fw_info.version.errata);
+ iounmap(tcpm_base);
+ }
+}
+
void __init db8500_prcmu_early_init(void)
{
- if (cpu_is_u8500v2() || cpu_is_u9540()) {
- void *tcpm_base = ioremap_nocache(U8500_PRCMU_TCPM_BASE, SZ_4K);
-
- if (tcpm_base != NULL) {
- u32 version;
- version = readl(tcpm_base + PRCMU_FW_VERSION_OFFSET);
- fw_info.version.project = version & 0xFF;
- fw_info.version.api_version = (version >> 8) & 0xFF;
- fw_info.version.func_version = (version >> 16) & 0xFF;
- fw_info.version.errata = (version >> 24) & 0xFF;
- fw_info.valid = true;
- pr_info("PRCMU firmware: %s, version %d.%d.%d\n",
- fw_project_name(fw_info.version.project),
- (version >> 8) & 0xFF, (version >> 16) & 0xFF,
- (version >> 24) & 0xFF);
- iounmap(tcpm_base);
- }
-
- if (cpu_is_u9540())
- tcdm_base = ioremap_nocache(U8500_PRCMU_TCDM_BASE,
- SZ_4K + SZ_8K) + SZ_8K;
- else
- tcdm_base = __io_address(U8500_PRCMU_TCDM_BASE);
- } else {
- pr_err("prcmu: Unsupported chip version\n");
- BUG();
- }
-
spin_lock_init(&mb0_transfer.lock);
spin_lock_init(&mb0_transfer.dbb_irqs_lock);
mutex_init(&mb0_transfer.ac_wake_lock);
@@ -3105,23 +3130,30 @@
*/
static int db8500_prcmu_probe(struct platform_device *pdev)
{
- struct ab8500_platform_data *ab8500_platdata = pdev->dev.platform_data;
struct device_node *np = pdev->dev.of_node;
+ struct prcmu_pdata *pdata = dev_get_platdata(&pdev->dev);
int irq = 0, err = 0, i;
-
- if (ux500_is_svp())
- return -ENODEV;
+ struct resource *res;
init_prcm_registers();
+ dbx500_fw_version_init(pdev, pdata->version_offset);
+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "prcmu-tcdm");
+ if (!res) {
+ dev_err(&pdev->dev, "no prcmu tcdm region provided\n");
+ return -ENOENT;
+ }
+ tcdm_base = devm_ioremap(&pdev->dev, res->start,
+ resource_size(res));
+
/* Clean up the mailbox interrupts after pre-kernel code. */
writel(ALL_MBOX_BITS, PRCM_ARM_IT1_CLR);
- if (np)
- irq = platform_get_irq(pdev, 0);
-
- if (!np || irq <= 0)
- irq = IRQ_DB8500_PRCMU1;
+ irq = platform_get_irq(pdev, 0);
+ if (irq <= 0) {
+ dev_err(&pdev->dev, "no prcmu irq provided\n");
+ return -ENOENT;
+ }
err = request_threaded_irq(irq, prcmu_irq_handler,
prcmu_irq_thread_fn, IRQF_NO_SUSPEND, "prcmu", NULL);
@@ -3135,13 +3167,12 @@
for (i = 0; i < ARRAY_SIZE(db8500_prcmu_devs); i++) {
if (!strcmp(db8500_prcmu_devs[i].name, "ab8500-core")) {
- db8500_prcmu_devs[i].platform_data = ab8500_platdata;
+ db8500_prcmu_devs[i].platform_data = pdata->ab_platdata;
db8500_prcmu_devs[i].pdata_size = sizeof(struct ab8500_platform_data);
}
}
- if (cpu_is_u8500v20_or_later())
- prcmu_config_esram0_deep_sleep(ESRAM0_DEEP_SLEEP_STATE_RET);
+ prcmu_config_esram0_deep_sleep(ESRAM0_DEEP_SLEEP_STATE_RET);
db8500_prcmu_update_cpufreq();
diff --git a/include/asm-generic/vmlinux.lds.h b/include/asm-generic/vmlinux.lds.h
index c1fe60ad..afa12c7 100644
--- a/include/asm-generic/vmlinux.lds.h
+++ b/include/asm-generic/vmlinux.lds.h
@@ -149,6 +149,24 @@
#define TRACE_SYSCALLS()
#endif
+#ifdef CONFIG_CLKSRC_OF
+#define CLKSRC_OF_TABLES() . = ALIGN(8); \
+ VMLINUX_SYMBOL(__clksrc_of_table) = .; \
+ *(__clksrc_of_table) \
+ *(__clksrc_of_table_end)
+#else
+#define CLKSRC_OF_TABLES()
+#endif
+
+#ifdef CONFIG_IRQCHIP
+#define IRQCHIP_OF_MATCH_TABLE() \
+ . = ALIGN(8); \
+ VMLINUX_SYMBOL(__irqchip_begin) = .; \
+ *(__irqchip_of_table) \
+ *(__irqchip_of_end)
+#else
+#define IRQCHIP_OF_MATCH_TABLE()
+#endif
#ifdef CONFIG_COMMON_CLK
#define CLK_OF_TABLES() . = ALIGN(8); \
@@ -503,7 +521,9 @@
CPU_DISCARD(init.rodata) \
MEM_DISCARD(init.rodata) \
CLK_OF_TABLES() \
- KERNEL_DTB()
+ CLKSRC_OF_TABLES() \
+ KERNEL_DTB() \
+ IRQCHIP_OF_MATCH_TABLE()
#define INIT_TEXT \
*(.init.text) \
diff --git a/include/linux/bcm2835_timer.h b/include/linux/bcm2835_timer.h
deleted file mode 100644
index 25680fe..0000000
--- a/include/linux/bcm2835_timer.h
+++ /dev/null
@@ -1,22 +0,0 @@
-/*
- * Copyright 2012 Simon Arlott
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#ifndef __BCM2835_TIMER_H
-#define __BCM2835_TIMER_H
-
-#include <asm/mach/time.h>
-
-extern struct sys_timer bcm2835_timer;
-
-#endif
diff --git a/include/linux/clocksource.h b/include/linux/clocksource.h
index 4dceaf8..27cfda4 100644
--- a/include/linux/clocksource.h
+++ b/include/linux/clocksource.h
@@ -332,4 +332,15 @@
extern int clocksource_i8253_init(void);
+#ifdef CONFIG_CLKSRC_OF
+extern void clocksource_of_init(void);
+
+#define CLOCKSOURCE_OF_DECLARE(name, compat, fn) \
+ static const struct of_device_id __clksrc_of_table_##name \
+ __used __section(__clksrc_of_table) \
+ = { .compatible = compat, .data = fn };
+#else
+#define CLOCKSOURCE_OF_DECLARE(name, compat, fn)
+#endif
+
#endif /* _LINUX_CLOCKSOURCE_H */
diff --git a/include/linux/dw_apb_timer.h b/include/linux/dw_apb_timer.h
index 1148575..dd755ce 100644
--- a/include/linux/dw_apb_timer.h
+++ b/include/linux/dw_apb_timer.h
@@ -53,5 +53,5 @@
cycle_t dw_apb_clocksource_read(struct dw_apb_clocksource *dw_cs);
void dw_apb_clocksource_unregister(struct dw_apb_clocksource *dw_cs);
-extern struct sys_timer dw_apb_timer;
+extern void dw_apb_timer_init(void);
#endif /* __DW_APB_TIMER_H__ */
diff --git a/include/linux/irqchip.h b/include/linux/irqchip.h
new file mode 100644
index 0000000..e0006f1
--- /dev/null
+++ b/include/linux/irqchip.h
@@ -0,0 +1,16 @@
+/*
+ * Copyright (C) 2012 Thomas Petazzoni
+ *
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef _LINUX_IRQCHIP_H
+#define _LINUX_IRQCHIP_H
+
+void irqchip_init(void);
+
+#endif
diff --git a/arch/arm/include/asm/hardware/gic.h b/include/linux/irqchip/arm-gic.h
similarity index 76%
rename from arch/arm/include/asm/hardware/gic.h
rename to include/linux/irqchip/arm-gic.h
index 4b1ce6c..a67ca55 100644
--- a/arch/arm/include/asm/hardware/gic.h
+++ b/include/linux/irqchip/arm-gic.h
@@ -1,5 +1,5 @@
/*
- * arch/arm/include/asm/hardware/gic.h
+ * include/linux/irqchip/arm-gic.h
*
* Copyright (C) 2002 ARM Limited, All Rights Reserved.
*
@@ -7,10 +7,8 @@
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
-#ifndef __ASM_ARM_HARDWARE_GIC_H
-#define __ASM_ARM_HARDWARE_GIC_H
-
-#include <linux/compiler.h>
+#ifndef __LINUX_IRQCHIP_ARM_GIC_H
+#define __LINUX_IRQCHIP_ARM_GIC_H
#define GIC_CPU_CTRL 0x00
#define GIC_CPU_PRIMASK 0x04
@@ -32,19 +30,14 @@
#define GIC_DIST_CONFIG 0xc00
#define GIC_DIST_SOFTINT 0xf00
-#ifndef __ASSEMBLY__
-#include <linux/irqdomain.h>
struct device_node;
extern struct irq_chip gic_arch_extn;
void gic_init_bases(unsigned int, int, void __iomem *, void __iomem *,
u32 offset, struct device_node *);
-int gic_of_init(struct device_node *node, struct device_node *parent);
void gic_secondary_init(unsigned int);
-void gic_handle_irq(struct pt_regs *regs);
void gic_cascade_irq(unsigned int gic_nr, unsigned int irq);
-void gic_raise_softirq(const struct cpumask *mask, unsigned int irq);
static inline void gic_init(unsigned int nr, int start,
void __iomem *dist , void __iomem *cpu)
@@ -53,5 +46,3 @@
}
#endif
-
-#endif
diff --git a/arch/arm/include/asm/hardware/vic.h b/include/linux/irqchip/arm-vic.h
similarity index 63%
rename from arch/arm/include/asm/hardware/vic.h
rename to include/linux/irqchip/arm-vic.h
index 2bebad3..e3c82dc 100644
--- a/arch/arm/include/asm/hardware/vic.h
+++ b/include/linux/irqchip/arm-vic.h
@@ -20,29 +20,11 @@
#ifndef __ASM_ARM_HARDWARE_VIC_H
#define __ASM_ARM_HARDWARE_VIC_H
-#define VIC_IRQ_STATUS 0x00
-#define VIC_FIQ_STATUS 0x04
+#include <linux/types.h>
+
#define VIC_RAW_STATUS 0x08
-#define VIC_INT_SELECT 0x0c /* 1 = FIQ, 0 = IRQ */
#define VIC_INT_ENABLE 0x10 /* 1 = enable, 0 = disable */
#define VIC_INT_ENABLE_CLEAR 0x14
-#define VIC_INT_SOFT 0x18
-#define VIC_INT_SOFT_CLEAR 0x1c
-#define VIC_PROTECT 0x20
-#define VIC_PL190_VECT_ADDR 0x30 /* PL190 only */
-#define VIC_PL190_DEF_VECT_ADDR 0x34 /* PL190 only */
-
-#define VIC_VECT_ADDR0 0x100 /* 0 to 15 (0..31 PL192) */
-#define VIC_VECT_CNTL0 0x200 /* 0 to 15 (0..31 PL192) */
-#define VIC_ITCR 0x300 /* VIC test control register */
-
-#define VIC_VECT_CNTL_ENABLE (1 << 5)
-
-#define VIC_PL192_VECT_ADDR 0xF00
-
-#ifndef __ASSEMBLY__
-#include <linux/compiler.h>
-#include <linux/types.h>
struct device_node;
struct pt_regs;
@@ -50,8 +32,5 @@
void __vic_init(void __iomem *base, int irq_start, u32 vic_sources,
u32 resume_sources, struct device_node *node);
void vic_init(void __iomem *base, unsigned int irq_start, u32 vic_sources, u32 resume_sources);
-int vic_of_init(struct device_node *node, struct device_node *parent);
-void vic_handle_irq(struct pt_regs *regs);
-#endif /* __ASSEMBLY__ */
#endif
diff --git a/include/linux/mfd/db8500-prcmu.h b/include/linux/mfd/db8500-prcmu.h
index 6ee4247..77a46ae 100644
--- a/include/linux/mfd/db8500-prcmu.h
+++ b/include/linux/mfd/db8500-prcmu.h
@@ -16,12 +16,6 @@
/*
* Registers
*/
-#define DB8500_PRCM_GPIOCR 0x138
-#define DB8500_PRCM_GPIOCR_DBG_UARTMOD_CMD0 BIT(0)
-#define DB8500_PRCM_GPIOCR_DBG_STM_APE_CMD BIT(9)
-#define DB8500_PRCM_GPIOCR_DBG_STM_MOD_CMD1 BIT(11)
-#define DB8500_PRCM_GPIOCR_SPI2_SELECT BIT(23)
-
#define DB8500_PRCM_LINE_VALUE 0x170
#define DB8500_PRCM_LINE_VALUE_HSI_CAWAKE0 BIT(3)
@@ -493,20 +487,6 @@
u8 sva_policy;
};
-#define PRCMU_FW_PROJECT_U8500 2
-#define PRCMU_FW_PROJECT_U9500 4
-#define PRCMU_FW_PROJECT_U8500_C2 7
-#define PRCMU_FW_PROJECT_U9500_C2 11
-#define PRCMU_FW_PROJECT_U8520 13
-#define PRCMU_FW_PROJECT_U8420 14
-
-struct prcmu_fw_version {
- u8 project;
- u8 api_version;
- u8 func_version;
- u8 errata;
-};
-
#ifdef CONFIG_MFD_DB8500_PRCMU
void db8500_prcmu_early_init(void);
diff --git a/include/linux/mfd/dbx500-prcmu.h b/include/linux/mfd/dbx500-prcmu.h
index c202d6c..f8bac7c 100644
--- a/include/linux/mfd/dbx500-prcmu.h
+++ b/include/linux/mfd/dbx500-prcmu.h
@@ -12,6 +12,10 @@
#include <linux/notifier.h>
#include <linux/err.h>
+/* Offset for the firmware version within the TCPM */
+#define DB8500_PRCMU_FW_VERSION_OFFSET 0xA4
+#define DBX540_PRCMU_FW_VERSION_OFFSET 0xA8
+
/* PRCMU Wakeup defines */
enum prcmu_wakeup_index {
PRCMU_WAKEUP_INDEX_RTC,
@@ -214,12 +218,52 @@
DDR_PWR_STATE_OFFHIGHLAT = 0x03
};
+#define DB8500_PRCMU_LEGACY_OFFSET 0xDD4
+
+struct prcmu_pdata
+{
+ bool enable_set_ddr_opp;
+ bool enable_ape_opp_100_voltage;
+ struct ab8500_platform_data *ab_platdata;
+ u32 version_offset;
+ u32 legacy_offset;
+ u32 adt_offset;
+};
+
+#define PRCMU_FW_PROJECT_U8500 2
+#define PRCMU_FW_PROJECT_U8400 3
+#define PRCMU_FW_PROJECT_U9500 4 /* Customer specific */
+#define PRCMU_FW_PROJECT_U8500_MBB 5
+#define PRCMU_FW_PROJECT_U8500_C1 6
+#define PRCMU_FW_PROJECT_U8500_C2 7
+#define PRCMU_FW_PROJECT_U8500_C3 8
+#define PRCMU_FW_PROJECT_U8500_C4 9
+#define PRCMU_FW_PROJECT_U9500_MBL 10
+#define PRCMU_FW_PROJECT_U8500_MBL 11 /* Customer specific */
+#define PRCMU_FW_PROJECT_U8500_MBL2 12 /* Customer specific */
+#define PRCMU_FW_PROJECT_U8520 13
+#define PRCMU_FW_PROJECT_U8420 14
+#define PRCMU_FW_PROJECT_A9420 20
+/* [32..63] 9540 and derivatives */
+#define PRCMU_FW_PROJECT_U9540 32
+/* [64..95] 8540 and derivatives */
+#define PRCMU_FW_PROJECT_L8540 64
+/* [96..126] 8580 and derivatives */
+#define PRCMU_FW_PROJECT_L8580 96
+
+#define PRCMU_FW_PROJECT_NAME_LEN 20
+struct prcmu_fw_version {
+ u32 project; /* Notice, project shifted with 8 on ux540 */
+ u8 api_version;
+ u8 func_version;
+ u8 errata;
+ char project_name[PRCMU_FW_PROJECT_NAME_LEN];
+};
+
#include <linux/mfd/db8500-prcmu.h>
#if defined(CONFIG_UX500_SOC_DB8500)
-#include <mach/id.h>
-
static inline void __init prcmu_early_init(void)
{
return db8500_prcmu_early_init();
@@ -626,85 +670,6 @@
prcmu_write_masked(reg, bits, 0);
}
-#if defined(CONFIG_UX500_SOC_DB8500)
-
-/**
- * prcmu_enable_spi2 - Enables pin muxing for SPI2 on OtherAlternateC1.
- */
-static inline void prcmu_enable_spi2(void)
-{
- if (cpu_is_u8500())
- prcmu_set(DB8500_PRCM_GPIOCR, DB8500_PRCM_GPIOCR_SPI2_SELECT);
-}
-
-/**
- * prcmu_disable_spi2 - Disables pin muxing for SPI2 on OtherAlternateC1.
- */
-static inline void prcmu_disable_spi2(void)
-{
- if (cpu_is_u8500())
- prcmu_clear(DB8500_PRCM_GPIOCR, DB8500_PRCM_GPIOCR_SPI2_SELECT);
-}
-
-/**
- * prcmu_enable_stm_mod_uart - Enables pin muxing for STMMOD
- * and UARTMOD on OtherAlternateC3.
- */
-static inline void prcmu_enable_stm_mod_uart(void)
-{
- if (cpu_is_u8500()) {
- prcmu_set(DB8500_PRCM_GPIOCR,
- (DB8500_PRCM_GPIOCR_DBG_STM_MOD_CMD1 |
- DB8500_PRCM_GPIOCR_DBG_UARTMOD_CMD0));
- }
-}
-
-/**
- * prcmu_disable_stm_mod_uart - Disables pin muxing for STMMOD
- * and UARTMOD on OtherAlternateC3.
- */
-static inline void prcmu_disable_stm_mod_uart(void)
-{
- if (cpu_is_u8500()) {
- prcmu_clear(DB8500_PRCM_GPIOCR,
- (DB8500_PRCM_GPIOCR_DBG_STM_MOD_CMD1 |
- DB8500_PRCM_GPIOCR_DBG_UARTMOD_CMD0));
- }
-}
-
-/**
- * prcmu_enable_stm_ape - Enables pin muxing for STM APE on OtherAlternateC1.
- */
-static inline void prcmu_enable_stm_ape(void)
-{
- if (cpu_is_u8500()) {
- prcmu_set(DB8500_PRCM_GPIOCR,
- DB8500_PRCM_GPIOCR_DBG_STM_APE_CMD);
- }
-}
-
-/**
- * prcmu_disable_stm_ape - Disables pin muxing for STM APE on OtherAlternateC1.
- */
-static inline void prcmu_disable_stm_ape(void)
-{
- if (cpu_is_u8500()) {
- prcmu_clear(DB8500_PRCM_GPIOCR,
- DB8500_PRCM_GPIOCR_DBG_STM_APE_CMD);
- }
-}
-
-#else
-
-static inline void prcmu_enable_spi2(void) {}
-static inline void prcmu_disable_spi2(void) {}
-static inline void prcmu_enable_stm_mod_uart(void) {}
-static inline void prcmu_disable_stm_mod_uart(void) {}
-static inline void prcmu_enable_stm_ape(void) {}
-static inline void prcmu_disable_stm_ape(void) {}
-
-#endif
-
/* PRCMU QoS APE OPP class */
#define PRCMU_QOS_APE_OPP 1
#define PRCMU_QOS_DDR_OPP 2
diff --git a/include/linux/sunxi_timer.h b/include/linux/sunxi_timer.h
index b9165bb..1808178 100644
--- a/include/linux/sunxi_timer.h
+++ b/include/linux/sunxi_timer.h
@@ -19,6 +19,6 @@
#include <asm/mach/time.h>
-extern struct sys_timer sunxi_timer;
+void sunxi_timer_init(void);
#endif
diff --git a/include/linux/time.h b/include/linux/time.h
index a3ab6a8..d4835df 100644
--- a/include/linux/time.h
+++ b/include/linux/time.h
@@ -154,9 +154,7 @@
* finer then tick granular time.
*/
#ifdef CONFIG_ARCH_USES_GETTIMEOFFSET
-extern u32 arch_gettimeoffset(void);
-#else
-static inline u32 arch_gettimeoffset(void) { return 0; }
+extern u32 (*arch_gettimeoffset)(void);
#endif
extern void do_gettimeofday(struct timeval *tv);
diff --git a/kernel/time/clockevents.c b/kernel/time/clockevents.c
index 30b6de0..c6d6400 100644
--- a/kernel/time/clockevents.c
+++ b/kernel/time/clockevents.c
@@ -339,6 +339,7 @@
clockevents_config(dev, freq);
clockevents_register_device(dev);
}
+EXPORT_SYMBOL_GPL(clockevents_config_and_register);
/**
* clockevents_update_freq - Update frequency and reprogram a clock event device.
diff --git a/kernel/time/timekeeping.c b/kernel/time/timekeeping.c
index 1e35515..9a0bc98 100644
--- a/kernel/time/timekeeping.c
+++ b/kernel/time/timekeeping.c
@@ -138,6 +138,20 @@
}
/* Timekeeper helper functions. */
+
+#ifdef CONFIG_ARCH_USES_GETTIMEOFFSET
+u32 (*arch_gettimeoffset)(void);
+
+u32 get_arch_timeoffset(void)
+{
+ if (likely(arch_gettimeoffset))
+ return arch_gettimeoffset();
+ return 0;
+}
+#else
+static inline u32 get_arch_timeoffset(void) { return 0; }
+#endif
+
static inline s64 timekeeping_get_ns(struct timekeeper *tk)
{
cycle_t cycle_now, cycle_delta;
@@ -154,8 +168,8 @@
nsec = cycle_delta * tk->mult + tk->xtime_nsec;
nsec >>= tk->shift;
- /* If arch requires, add in gettimeoffset() */
- return nsec + arch_gettimeoffset();
+ /* If arch requires, add in get_arch_timeoffset() */
+ return nsec + get_arch_timeoffset();
}
static inline s64 timekeeping_get_ns_raw(struct timekeeper *tk)
@@ -174,8 +188,8 @@
/* convert delta to nanoseconds. */
nsec = clocksource_cyc2ns(cycle_delta, clock->mult, clock->shift);
- /* If arch requires, add in gettimeoffset() */
- return nsec + arch_gettimeoffset();
+ /* If arch requires, add in get_arch_timeoffset() */
+ return nsec + get_arch_timeoffset();
}
static RAW_NOTIFIER_HEAD(pvclock_gtod_chain);
@@ -257,8 +271,8 @@
tk->xtime_nsec += cycle_delta * tk->mult;
- /* If arch requires, add in gettimeoffset() */
- tk->xtime_nsec += (u64)arch_gettimeoffset() << tk->shift;
+ /* If arch requires, add in get_arch_timeoffset() */
+ tk->xtime_nsec += (u64)get_arch_timeoffset() << tk->shift;
tk_normalize_xtime(tk);
diff --git a/sound/soc/samsung/h1940_uda1380.c b/sound/soc/samsung/h1940_uda1380.c
index 3870e96..15a3817 100644
--- a/sound/soc/samsung/h1940_uda1380.c
+++ b/sound/soc/samsung/h1940_uda1380.c
@@ -21,7 +21,6 @@
#include <sound/jack.h>
#include <plat/regs-iis.h>
-#include <mach/h1940-latch.h>
#include <asm/mach-types.h>
#include "s3c24xx-i2s.h"
@@ -147,9 +146,9 @@
struct snd_kcontrol *kcontrol, int event)
{
if (SND_SOC_DAPM_EVENT_ON(event))
- gpio_set_value(H1940_LATCH_AUDIO_POWER, 1);
+ gpio_set_value(S3C_GPIO_END + 9, 1);
else
- gpio_set_value(H1940_LATCH_AUDIO_POWER, 0);
+ gpio_set_value(S3C_GPIO_END + 9, 0);
return 0;
}
@@ -233,11 +232,11 @@
return -ENODEV;
/* configure some gpios */
- ret = gpio_request(H1940_LATCH_AUDIO_POWER, "speaker-power");
+ ret = gpio_request(S3C_GPIO_END + 9, "speaker-power");
if (ret)
goto err_out;
- ret = gpio_direction_output(H1940_LATCH_AUDIO_POWER, 0);
+ ret = gpio_direction_output(S3C_GPIO_END + 9, 0);
if (ret)
goto err_gpio;
@@ -258,7 +257,7 @@
err_plat:
platform_device_put(s3c24xx_snd_device);
err_gpio:
- gpio_free(H1940_LATCH_AUDIO_POWER);
+ gpio_free(S3C_GPIO_END + 9);
err_out:
return ret;
@@ -269,7 +268,7 @@
platform_device_unregister(s3c24xx_snd_device);
snd_soc_jack_free_gpios(&hp_jack, ARRAY_SIZE(hp_jack_gpios),
hp_jack_gpios);
- gpio_free(H1940_LATCH_AUDIO_POWER);
+ gpio_free(S3C_GPIO_END + 9);
}
module_init(h1940_init);
diff --git a/sound/soc/samsung/neo1973_wm8753.c b/sound/soc/samsung/neo1973_wm8753.c
index c7e965f..a301d8c 100644
--- a/sound/soc/samsung/neo1973_wm8753.c
+++ b/sound/soc/samsung/neo1973_wm8753.c
@@ -237,7 +237,7 @@
{
gta02_speaker_enabled = ucontrol->value.integer.value[0];
- gpio_set_value(GTA02_GPIO_HP_IN, !gta02_speaker_enabled);
+ gpio_set_value(S3C2410_GPJ(2), !gta02_speaker_enabled);
return 0;
}
@@ -252,7 +252,7 @@
static int lm4853_event(struct snd_soc_dapm_widget *w,
struct snd_kcontrol *k, int event)
{
- gpio_set_value(GTA02_GPIO_AMP_SHUT, SND_SOC_DAPM_EVENT_OFF(event));
+ gpio_set_value(S3C2410_GPJ(1), SND_SOC_DAPM_EVENT_OFF(event));
return 0;
}
@@ -396,8 +396,8 @@
};
static const struct gpio neo1973_gta02_gpios[] = {
- { GTA02_GPIO_HP_IN, GPIOF_OUT_INIT_HIGH, "GTA02_HP_IN" },
- { GTA02_GPIO_AMP_SHUT, GPIOF_OUT_INIT_HIGH, "GTA02_AMP_SHUT" },
+ { S3C2410_GPJ(2), GPIOF_OUT_INIT_HIGH, "GTA02_HP_IN" },
+ { S3C2410_GPJ(1), GPIOF_OUT_INIT_HIGH, "GTA02_AMP_SHUT" },
};
static struct snd_soc_card neo1973 = {