| /* |
| * HP WatchDog Driver |
| * based on |
| * |
| * SoftDog 0.05: A Software Watchdog Device |
| * |
| * (c) Copyright 2007 Hewlett-Packard Development Company, L.P. |
| * Thomas Mingarelli <thomas.mingarelli@hp.com> |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License |
| * version 2 as published by the Free Software Foundation |
| * |
| */ |
| |
| #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt |
| |
| #include <linux/device.h> |
| #include <linux/fs.h> |
| #include <linux/io.h> |
| #include <linux/bitops.h> |
| #include <linux/kernel.h> |
| #include <linux/miscdevice.h> |
| #include <linux/module.h> |
| #include <linux/moduleparam.h> |
| #include <linux/pci.h> |
| #include <linux/pci_ids.h> |
| #include <linux/types.h> |
| #include <linux/uaccess.h> |
| #include <linux/watchdog.h> |
| #ifdef CONFIG_HPWDT_NMI_DECODING |
| #include <linux/dmi.h> |
| #include <linux/spinlock.h> |
| #include <linux/nmi.h> |
| #include <linux/kdebug.h> |
| #include <linux/notifier.h> |
| #include <asm/cacheflush.h> |
| #endif /* CONFIG_HPWDT_NMI_DECODING */ |
| #include <asm/nmi.h> |
| |
| #define HPWDT_VERSION "1.3.3" |
| #define SECS_TO_TICKS(secs) ((secs) * 1000 / 128) |
| #define TICKS_TO_SECS(ticks) ((ticks) * 128 / 1000) |
| #define HPWDT_MAX_TIMER TICKS_TO_SECS(65535) |
| #define DEFAULT_MARGIN 30 |
| |
| static unsigned int soft_margin = DEFAULT_MARGIN; /* in seconds */ |
| static unsigned int reload; /* the computed soft_margin */ |
| static bool nowayout = WATCHDOG_NOWAYOUT; |
| static char expect_release; |
| static unsigned long hpwdt_is_open; |
| |
| static void __iomem *pci_mem_addr; /* the PCI-memory address */ |
| static unsigned long __iomem *hpwdt_timer_reg; |
| static unsigned long __iomem *hpwdt_timer_con; |
| |
| static const struct pci_device_id hpwdt_devices[] = { |
| { PCI_DEVICE(PCI_VENDOR_ID_COMPAQ, 0xB203) }, /* iLO2 */ |
| { PCI_DEVICE(PCI_VENDOR_ID_HP, 0x3306) }, /* iLO3 */ |
| {0}, /* terminate list */ |
| }; |
| MODULE_DEVICE_TABLE(pci, hpwdt_devices); |
| |
| #ifdef CONFIG_HPWDT_NMI_DECODING |
| #define PCI_BIOS32_SD_VALUE 0x5F32335F /* "_32_" */ |
| #define CRU_BIOS_SIGNATURE_VALUE 0x55524324 |
| #define PCI_BIOS32_PARAGRAPH_LEN 16 |
| #define PCI_ROM_BASE1 0x000F0000 |
| #define ROM_SIZE 0x10000 |
| |
| struct bios32_service_dir { |
| u32 signature; |
| u32 entry_point; |
| u8 revision; |
| u8 length; |
| u8 checksum; |
| u8 reserved[5]; |
| }; |
| |
| /* type 212 */ |
| struct smbios_cru64_info { |
| u8 type; |
| u8 byte_length; |
| u16 handle; |
| u32 signature; |
| u64 physical_address; |
| u32 double_length; |
| u32 double_offset; |
| }; |
| #define SMBIOS_CRU64_INFORMATION 212 |
| |
| /* type 219 */ |
| struct smbios_proliant_info { |
| u8 type; |
| u8 byte_length; |
| u16 handle; |
| u32 power_features; |
| u32 omega_features; |
| u32 reserved; |
| u32 misc_features; |
| }; |
| #define SMBIOS_ICRU_INFORMATION 219 |
| |
| |
| struct cmn_registers { |
| union { |
| struct { |
| u8 ral; |
| u8 rah; |
| u16 rea2; |
| }; |
| u32 reax; |
| } u1; |
| union { |
| struct { |
| u8 rbl; |
| u8 rbh; |
| u8 reb2l; |
| u8 reb2h; |
| }; |
| u32 rebx; |
| } u2; |
| union { |
| struct { |
| u8 rcl; |
| u8 rch; |
| u16 rec2; |
| }; |
| u32 recx; |
| } u3; |
| union { |
| struct { |
| u8 rdl; |
| u8 rdh; |
| u16 red2; |
| }; |
| u32 redx; |
| } u4; |
| |
| u32 resi; |
| u32 redi; |
| u16 rds; |
| u16 res; |
| u32 reflags; |
| } __attribute__((packed)); |
| |
| static unsigned int hpwdt_nmi_decoding; |
| static unsigned int allow_kdump = 1; |
| static unsigned int is_icru; |
| static unsigned int is_uefi; |
| static DEFINE_SPINLOCK(rom_lock); |
| static void *cru_rom_addr; |
| static struct cmn_registers cmn_regs; |
| |
| extern asmlinkage void asminline_call(struct cmn_registers *pi86Regs, |
| unsigned long *pRomEntry); |
| |
| #ifdef CONFIG_X86_32 |
| /* --32 Bit Bios------------------------------------------------------------ */ |
| |
| #define HPWDT_ARCH 32 |
| |
| asm(".text \n\t" |
| ".align 4 \n\t" |
| ".globl asminline_call \n" |
| "asminline_call: \n\t" |
| "pushl %ebp \n\t" |
| "movl %esp, %ebp \n\t" |
| "pusha \n\t" |
| "pushf \n\t" |
| "push %es \n\t" |
| "push %ds \n\t" |
| "pop %es \n\t" |
| "movl 8(%ebp),%eax \n\t" |
| "movl 4(%eax),%ebx \n\t" |
| "movl 8(%eax),%ecx \n\t" |
| "movl 12(%eax),%edx \n\t" |
| "movl 16(%eax),%esi \n\t" |
| "movl 20(%eax),%edi \n\t" |
| "movl (%eax),%eax \n\t" |
| "push %cs \n\t" |
| "call *12(%ebp) \n\t" |
| "pushf \n\t" |
| "pushl %eax \n\t" |
| "movl 8(%ebp),%eax \n\t" |
| "movl %ebx,4(%eax) \n\t" |
| "movl %ecx,8(%eax) \n\t" |
| "movl %edx,12(%eax) \n\t" |
| "movl %esi,16(%eax) \n\t" |
| "movl %edi,20(%eax) \n\t" |
| "movw %ds,24(%eax) \n\t" |
| "movw %es,26(%eax) \n\t" |
| "popl %ebx \n\t" |
| "movl %ebx,(%eax) \n\t" |
| "popl %ebx \n\t" |
| "movl %ebx,28(%eax) \n\t" |
| "pop %es \n\t" |
| "popf \n\t" |
| "popa \n\t" |
| "leave \n\t" |
| "ret \n\t" |
| ".previous"); |
| |
| |
| /* |
| * cru_detect |
| * |
| * Routine Description: |
| * This function uses the 32-bit BIOS Service Directory record to |
| * search for a $CRU record. |
| * |
| * Return Value: |
| * 0 : SUCCESS |
| * <0 : FAILURE |
| */ |
| static int cru_detect(unsigned long map_entry, |
| unsigned long map_offset) |
| { |
| void *bios32_map; |
| unsigned long *bios32_entrypoint; |
| unsigned long cru_physical_address; |
| unsigned long cru_length; |
| unsigned long physical_bios_base = 0; |
| unsigned long physical_bios_offset = 0; |
| int retval = -ENODEV; |
| |
| bios32_map = ioremap(map_entry, (2 * PAGE_SIZE)); |
| |
| if (bios32_map == NULL) |
| return -ENODEV; |
| |
| bios32_entrypoint = bios32_map + map_offset; |
| |
| cmn_regs.u1.reax = CRU_BIOS_SIGNATURE_VALUE; |
| |
| set_memory_x((unsigned long)bios32_map, 2); |
| asminline_call(&cmn_regs, bios32_entrypoint); |
| |
| if (cmn_regs.u1.ral != 0) { |
| pr_warn("Call succeeded but with an error: 0x%x\n", |
| cmn_regs.u1.ral); |
| } else { |
| physical_bios_base = cmn_regs.u2.rebx; |
| physical_bios_offset = cmn_regs.u4.redx; |
| cru_length = cmn_regs.u3.recx; |
| cru_physical_address = |
| physical_bios_base + physical_bios_offset; |
| |
| /* If the values look OK, then map it in. */ |
| if ((physical_bios_base + physical_bios_offset)) { |
| cru_rom_addr = |
| ioremap(cru_physical_address, cru_length); |
| if (cru_rom_addr) { |
| set_memory_x((unsigned long)cru_rom_addr & PAGE_MASK, |
| (cru_length + PAGE_SIZE - 1) >> PAGE_SHIFT); |
| retval = 0; |
| } |
| } |
| |
| pr_debug("CRU Base Address: 0x%lx\n", physical_bios_base); |
| pr_debug("CRU Offset Address: 0x%lx\n", physical_bios_offset); |
| pr_debug("CRU Length: 0x%lx\n", cru_length); |
| pr_debug("CRU Mapped Address: %p\n", &cru_rom_addr); |
| } |
| iounmap(bios32_map); |
| return retval; |
| } |
| |
| /* |
| * bios_checksum |
| */ |
| static int bios_checksum(const char __iomem *ptr, int len) |
| { |
| char sum = 0; |
| int i; |
| |
| /* |
| * calculate checksum of size bytes. This should add up |
| * to zero if we have a valid header. |
| */ |
| for (i = 0; i < len; i++) |
| sum += ptr[i]; |
| |
| return ((sum == 0) && (len > 0)); |
| } |
| |
| /* |
| * bios32_present |
| * |
| * Routine Description: |
| * This function finds the 32-bit BIOS Service Directory |
| * |
| * Return Value: |
| * 0 : SUCCESS |
| * <0 : FAILURE |
| */ |
| static int bios32_present(const char __iomem *p) |
| { |
| struct bios32_service_dir *bios_32_ptr; |
| int length; |
| unsigned long map_entry, map_offset; |
| |
| bios_32_ptr = (struct bios32_service_dir *) p; |
| |
| /* |
| * Search for signature by checking equal to the swizzled value |
| * instead of calling another routine to perform a strcmp. |
| */ |
| if (bios_32_ptr->signature == PCI_BIOS32_SD_VALUE) { |
| length = bios_32_ptr->length * PCI_BIOS32_PARAGRAPH_LEN; |
| if (bios_checksum(p, length)) { |
| /* |
| * According to the spec, we're looking for the |
| * first 4KB-aligned address below the entrypoint |
| * listed in the header. The Service Directory code |
| * is guaranteed to occupy no more than 2 4KB pages. |
| */ |
| map_entry = bios_32_ptr->entry_point & ~(PAGE_SIZE - 1); |
| map_offset = bios_32_ptr->entry_point - map_entry; |
| |
| return cru_detect(map_entry, map_offset); |
| } |
| } |
| return -ENODEV; |
| } |
| |
| static int detect_cru_service(void) |
| { |
| char __iomem *p, *q; |
| int rc = -1; |
| |
| /* |
| * Search from 0x0f0000 through 0x0fffff, inclusive. |
| */ |
| p = ioremap(PCI_ROM_BASE1, ROM_SIZE); |
| if (p == NULL) |
| return -ENOMEM; |
| |
| for (q = p; q < p + ROM_SIZE; q += 16) { |
| rc = bios32_present(q); |
| if (!rc) |
| break; |
| } |
| iounmap(p); |
| return rc; |
| } |
| /* ------------------------------------------------------------------------- */ |
| #endif /* CONFIG_X86_32 */ |
| #ifdef CONFIG_X86_64 |
| /* --64 Bit Bios------------------------------------------------------------ */ |
| |
| #define HPWDT_ARCH 64 |
| |
| asm(".text \n\t" |
| ".align 4 \n\t" |
| ".globl asminline_call \n" |
| "asminline_call: \n\t" |
| "pushq %rbp \n\t" |
| "movq %rsp, %rbp \n\t" |
| "pushq %rax \n\t" |
| "pushq %rbx \n\t" |
| "pushq %rdx \n\t" |
| "pushq %r12 \n\t" |
| "pushq %r9 \n\t" |
| "movq %rsi, %r12 \n\t" |
| "movq %rdi, %r9 \n\t" |
| "movl 4(%r9),%ebx \n\t" |
| "movl 8(%r9),%ecx \n\t" |
| "movl 12(%r9),%edx \n\t" |
| "movl 16(%r9),%esi \n\t" |
| "movl 20(%r9),%edi \n\t" |
| "movl (%r9),%eax \n\t" |
| "call *%r12 \n\t" |
| "pushfq \n\t" |
| "popq %r12 \n\t" |
| "movl %eax, (%r9) \n\t" |
| "movl %ebx, 4(%r9) \n\t" |
| "movl %ecx, 8(%r9) \n\t" |
| "movl %edx, 12(%r9) \n\t" |
| "movl %esi, 16(%r9) \n\t" |
| "movl %edi, 20(%r9) \n\t" |
| "movq %r12, %rax \n\t" |
| "movl %eax, 28(%r9) \n\t" |
| "popq %r9 \n\t" |
| "popq %r12 \n\t" |
| "popq %rdx \n\t" |
| "popq %rbx \n\t" |
| "popq %rax \n\t" |
| "leave \n\t" |
| "ret \n\t" |
| ".previous"); |
| |
| /* |
| * dmi_find_cru |
| * |
| * Routine Description: |
| * This function checks whether or not a SMBIOS/DMI record is |
| * the 64bit CRU info or not |
| */ |
| static void dmi_find_cru(const struct dmi_header *dm, void *dummy) |
| { |
| struct smbios_cru64_info *smbios_cru64_ptr; |
| unsigned long cru_physical_address; |
| |
| if (dm->type == SMBIOS_CRU64_INFORMATION) { |
| smbios_cru64_ptr = (struct smbios_cru64_info *) dm; |
| if (smbios_cru64_ptr->signature == CRU_BIOS_SIGNATURE_VALUE) { |
| cru_physical_address = |
| smbios_cru64_ptr->physical_address + |
| smbios_cru64_ptr->double_offset; |
| cru_rom_addr = ioremap(cru_physical_address, |
| smbios_cru64_ptr->double_length); |
| set_memory_x((unsigned long)cru_rom_addr & PAGE_MASK, |
| smbios_cru64_ptr->double_length >> PAGE_SHIFT); |
| } |
| } |
| } |
| |
| static int detect_cru_service(void) |
| { |
| cru_rom_addr = NULL; |
| |
| dmi_walk(dmi_find_cru, NULL); |
| |
| /* if cru_rom_addr has been set then we found a CRU service */ |
| return ((cru_rom_addr != NULL) ? 0 : -ENODEV); |
| } |
| /* ------------------------------------------------------------------------- */ |
| #endif /* CONFIG_X86_64 */ |
| #endif /* CONFIG_HPWDT_NMI_DECODING */ |
| |
| /* |
| * Watchdog operations |
| */ |
| static void hpwdt_start(void) |
| { |
| reload = SECS_TO_TICKS(soft_margin); |
| iowrite16(reload, hpwdt_timer_reg); |
| iowrite8(0x85, hpwdt_timer_con); |
| } |
| |
| static void hpwdt_stop(void) |
| { |
| unsigned long data; |
| |
| data = ioread8(hpwdt_timer_con); |
| data &= 0xFE; |
| iowrite8(data, hpwdt_timer_con); |
| } |
| |
| static void hpwdt_ping(void) |
| { |
| iowrite16(reload, hpwdt_timer_reg); |
| } |
| |
| static int hpwdt_change_timer(int new_margin) |
| { |
| if (new_margin < 1 || new_margin > HPWDT_MAX_TIMER) { |
| pr_warn("New value passed in is invalid: %d seconds\n", |
| new_margin); |
| return -EINVAL; |
| } |
| |
| soft_margin = new_margin; |
| pr_debug("New timer passed in is %d seconds\n", new_margin); |
| reload = SECS_TO_TICKS(soft_margin); |
| |
| return 0; |
| } |
| |
| static int hpwdt_time_left(void) |
| { |
| return TICKS_TO_SECS(ioread16(hpwdt_timer_reg)); |
| } |
| |
| #ifdef CONFIG_HPWDT_NMI_DECODING |
| /* |
| * NMI Handler |
| */ |
| static int hpwdt_pretimeout(unsigned int ulReason, struct pt_regs *regs) |
| { |
| unsigned long rom_pl; |
| static int die_nmi_called; |
| |
| if (!hpwdt_nmi_decoding) |
| goto out; |
| |
| spin_lock_irqsave(&rom_lock, rom_pl); |
| if (!die_nmi_called && !is_icru && !is_uefi) |
| asminline_call(&cmn_regs, cru_rom_addr); |
| die_nmi_called = 1; |
| spin_unlock_irqrestore(&rom_lock, rom_pl); |
| |
| if (allow_kdump) |
| hpwdt_stop(); |
| |
| if (!is_icru && !is_uefi) { |
| if (cmn_regs.u1.ral == 0) { |
| panic("An NMI occurred, " |
| "but unable to determine source.\n"); |
| } |
| } |
| panic("An NMI occurred. Depending on your system the reason " |
| "for the NMI is logged in any one of the following " |
| "resources:\n" |
| "1. Integrated Management Log (IML)\n" |
| "2. OA Syslog\n" |
| "3. OA Forward Progress Log\n" |
| "4. iLO Event Log"); |
| |
| out: |
| return NMI_DONE; |
| } |
| #endif /* CONFIG_HPWDT_NMI_DECODING */ |
| |
| /* |
| * /dev/watchdog handling |
| */ |
| static int hpwdt_open(struct inode *inode, struct file *file) |
| { |
| /* /dev/watchdog can only be opened once */ |
| if (test_and_set_bit(0, &hpwdt_is_open)) |
| return -EBUSY; |
| |
| /* Start the watchdog */ |
| hpwdt_start(); |
| hpwdt_ping(); |
| |
| return nonseekable_open(inode, file); |
| } |
| |
| static int hpwdt_release(struct inode *inode, struct file *file) |
| { |
| /* Stop the watchdog */ |
| if (expect_release == 42) { |
| hpwdt_stop(); |
| } else { |
| pr_crit("Unexpected close, not stopping watchdog!\n"); |
| hpwdt_ping(); |
| } |
| |
| expect_release = 0; |
| |
| /* /dev/watchdog is being closed, make sure it can be re-opened */ |
| clear_bit(0, &hpwdt_is_open); |
| |
| return 0; |
| } |
| |
| static ssize_t hpwdt_write(struct file *file, const char __user *data, |
| size_t len, loff_t *ppos) |
| { |
| /* See if we got the magic character 'V' and reload the timer */ |
| if (len) { |
| if (!nowayout) { |
| size_t i; |
| |
| /* note: just in case someone wrote the magic character |
| * five months ago... */ |
| expect_release = 0; |
| |
| /* scan to see whether or not we got the magic char. */ |
| for (i = 0; i != len; i++) { |
| char c; |
| if (get_user(c, data + i)) |
| return -EFAULT; |
| if (c == 'V') |
| expect_release = 42; |
| } |
| } |
| |
| /* someone wrote to us, we should reload the timer */ |
| hpwdt_ping(); |
| } |
| |
| return len; |
| } |
| |
| static const struct watchdog_info ident = { |
| .options = WDIOF_SETTIMEOUT | |
| WDIOF_KEEPALIVEPING | |
| WDIOF_MAGICCLOSE, |
| .identity = "HP iLO2+ HW Watchdog Timer", |
| }; |
| |
| static long hpwdt_ioctl(struct file *file, unsigned int cmd, |
| unsigned long arg) |
| { |
| void __user *argp = (void __user *)arg; |
| int __user *p = argp; |
| int new_margin; |
| int ret = -ENOTTY; |
| |
| switch (cmd) { |
| case WDIOC_GETSUPPORT: |
| ret = 0; |
| if (copy_to_user(argp, &ident, sizeof(ident))) |
| ret = -EFAULT; |
| break; |
| |
| case WDIOC_GETSTATUS: |
| case WDIOC_GETBOOTSTATUS: |
| ret = put_user(0, p); |
| break; |
| |
| case WDIOC_KEEPALIVE: |
| hpwdt_ping(); |
| ret = 0; |
| break; |
| |
| case WDIOC_SETTIMEOUT: |
| ret = get_user(new_margin, p); |
| if (ret) |
| break; |
| |
| ret = hpwdt_change_timer(new_margin); |
| if (ret) |
| break; |
| |
| hpwdt_ping(); |
| /* Fall */ |
| case WDIOC_GETTIMEOUT: |
| ret = put_user(soft_margin, p); |
| break; |
| |
| case WDIOC_GETTIMELEFT: |
| ret = put_user(hpwdt_time_left(), p); |
| break; |
| } |
| return ret; |
| } |
| |
| /* |
| * Kernel interfaces |
| */ |
| static const struct file_operations hpwdt_fops = { |
| .owner = THIS_MODULE, |
| .llseek = no_llseek, |
| .write = hpwdt_write, |
| .unlocked_ioctl = hpwdt_ioctl, |
| .open = hpwdt_open, |
| .release = hpwdt_release, |
| }; |
| |
| static struct miscdevice hpwdt_miscdev = { |
| .minor = WATCHDOG_MINOR, |
| .name = "watchdog", |
| .fops = &hpwdt_fops, |
| }; |
| |
| /* |
| * Init & Exit |
| */ |
| |
| #ifdef CONFIG_HPWDT_NMI_DECODING |
| #ifdef CONFIG_X86_LOCAL_APIC |
| static void hpwdt_check_nmi_decoding(struct pci_dev *dev) |
| { |
| /* |
| * If nmi_watchdog is turned off then we can turn on |
| * our nmi decoding capability. |
| */ |
| hpwdt_nmi_decoding = 1; |
| } |
| #else |
| static void hpwdt_check_nmi_decoding(struct pci_dev *dev) |
| { |
| dev_warn(&dev->dev, "NMI decoding is disabled. " |
| "Your kernel does not support a NMI Watchdog.\n"); |
| } |
| #endif /* CONFIG_X86_LOCAL_APIC */ |
| |
| /* |
| * dmi_find_icru |
| * |
| * Routine Description: |
| * This function checks whether or not we are on an iCRU-based server. |
| * This check is independent of architecture and needs to be made for |
| * any ProLiant system. |
| */ |
| static void dmi_find_icru(const struct dmi_header *dm, void *dummy) |
| { |
| struct smbios_proliant_info *smbios_proliant_ptr; |
| |
| if (dm->type == SMBIOS_ICRU_INFORMATION) { |
| smbios_proliant_ptr = (struct smbios_proliant_info *) dm; |
| if (smbios_proliant_ptr->misc_features & 0x01) |
| is_icru = 1; |
| if (smbios_proliant_ptr->misc_features & 0x408) |
| is_uefi = 1; |
| } |
| } |
| |
| static int hpwdt_init_nmi_decoding(struct pci_dev *dev) |
| { |
| int retval; |
| |
| /* |
| * On typical CRU-based systems we need to map that service in |
| * the BIOS. For 32 bit Operating Systems we need to go through |
| * the 32 Bit BIOS Service Directory. For 64 bit Operating |
| * Systems we get that service through SMBIOS. |
| * |
| * On systems that support the new iCRU service all we need to |
| * do is call dmi_walk to get the supported flag value and skip |
| * the old cru detect code. |
| */ |
| dmi_walk(dmi_find_icru, NULL); |
| if (!is_icru && !is_uefi) { |
| |
| /* |
| * We need to map the ROM to get the CRU service. |
| * For 32 bit Operating Systems we need to go through the 32 Bit |
| * BIOS Service Directory |
| * For 64 bit Operating Systems we get that service through SMBIOS. |
| */ |
| retval = detect_cru_service(); |
| if (retval < 0) { |
| dev_warn(&dev->dev, |
| "Unable to detect the %d Bit CRU Service.\n", |
| HPWDT_ARCH); |
| return retval; |
| } |
| |
| /* |
| * We know this is the only CRU call we need to make so lets keep as |
| * few instructions as possible once the NMI comes in. |
| */ |
| cmn_regs.u1.rah = 0x0D; |
| cmn_regs.u1.ral = 0x02; |
| } |
| |
| /* |
| * Only one function can register for NMI_UNKNOWN |
| */ |
| retval = register_nmi_handler(NMI_UNKNOWN, hpwdt_pretimeout, 0, "hpwdt"); |
| if (retval) |
| goto error; |
| retval = register_nmi_handler(NMI_SERR, hpwdt_pretimeout, 0, "hpwdt"); |
| if (retval) |
| goto error1; |
| retval = register_nmi_handler(NMI_IO_CHECK, hpwdt_pretimeout, 0, "hpwdt"); |
| if (retval) |
| goto error2; |
| |
| dev_info(&dev->dev, |
| "HP Watchdog Timer Driver: NMI decoding initialized" |
| ", allow kernel dump: %s (default = 1/ON)\n", |
| (allow_kdump == 0) ? "OFF" : "ON"); |
| return 0; |
| |
| error2: |
| unregister_nmi_handler(NMI_SERR, "hpwdt"); |
| error1: |
| unregister_nmi_handler(NMI_UNKNOWN, "hpwdt"); |
| error: |
| dev_warn(&dev->dev, |
| "Unable to register a die notifier (err=%d).\n", |
| retval); |
| if (cru_rom_addr) |
| iounmap(cru_rom_addr); |
| return retval; |
| } |
| |
| static void hpwdt_exit_nmi_decoding(void) |
| { |
| unregister_nmi_handler(NMI_UNKNOWN, "hpwdt"); |
| unregister_nmi_handler(NMI_SERR, "hpwdt"); |
| unregister_nmi_handler(NMI_IO_CHECK, "hpwdt"); |
| if (cru_rom_addr) |
| iounmap(cru_rom_addr); |
| } |
| #else /* !CONFIG_HPWDT_NMI_DECODING */ |
| static void hpwdt_check_nmi_decoding(struct pci_dev *dev) |
| { |
| } |
| |
| static int hpwdt_init_nmi_decoding(struct pci_dev *dev) |
| { |
| return 0; |
| } |
| |
| static void hpwdt_exit_nmi_decoding(void) |
| { |
| } |
| #endif /* CONFIG_HPWDT_NMI_DECODING */ |
| |
| static int hpwdt_init_one(struct pci_dev *dev, |
| const struct pci_device_id *ent) |
| { |
| int retval; |
| |
| /* |
| * Check if we can do NMI decoding or not |
| */ |
| hpwdt_check_nmi_decoding(dev); |
| |
| /* |
| * First let's find out if we are on an iLO2+ server. We will |
| * not run on a legacy ASM box. |
| * So we only support the G5 ProLiant servers and higher. |
| */ |
| if (dev->subsystem_vendor != PCI_VENDOR_ID_HP) { |
| dev_warn(&dev->dev, |
| "This server does not have an iLO2+ ASIC.\n"); |
| return -ENODEV; |
| } |
| |
| /* |
| * Ignore all auxilary iLO devices with the following PCI ID |
| */ |
| if (dev->subsystem_device == 0x1979) |
| return -ENODEV; |
| |
| if (pci_enable_device(dev)) { |
| dev_warn(&dev->dev, |
| "Not possible to enable PCI Device: 0x%x:0x%x.\n", |
| ent->vendor, ent->device); |
| return -ENODEV; |
| } |
| |
| pci_mem_addr = pci_iomap(dev, 1, 0x80); |
| if (!pci_mem_addr) { |
| dev_warn(&dev->dev, |
| "Unable to detect the iLO2+ server memory.\n"); |
| retval = -ENOMEM; |
| goto error_pci_iomap; |
| } |
| hpwdt_timer_reg = pci_mem_addr + 0x70; |
| hpwdt_timer_con = pci_mem_addr + 0x72; |
| |
| /* Make sure that timer is disabled until /dev/watchdog is opened */ |
| hpwdt_stop(); |
| |
| /* Make sure that we have a valid soft_margin */ |
| if (hpwdt_change_timer(soft_margin)) |
| hpwdt_change_timer(DEFAULT_MARGIN); |
| |
| /* Initialize NMI Decoding functionality */ |
| retval = hpwdt_init_nmi_decoding(dev); |
| if (retval != 0) |
| goto error_init_nmi_decoding; |
| |
| retval = misc_register(&hpwdt_miscdev); |
| if (retval < 0) { |
| dev_warn(&dev->dev, |
| "Unable to register miscdev on minor=%d (err=%d).\n", |
| WATCHDOG_MINOR, retval); |
| goto error_misc_register; |
| } |
| |
| dev_info(&dev->dev, "HP Watchdog Timer Driver: %s" |
| ", timer margin: %d seconds (nowayout=%d).\n", |
| HPWDT_VERSION, soft_margin, nowayout); |
| return 0; |
| |
| error_misc_register: |
| hpwdt_exit_nmi_decoding(); |
| error_init_nmi_decoding: |
| pci_iounmap(dev, pci_mem_addr); |
| error_pci_iomap: |
| pci_disable_device(dev); |
| return retval; |
| } |
| |
| static void hpwdt_exit(struct pci_dev *dev) |
| { |
| if (!nowayout) |
| hpwdt_stop(); |
| |
| misc_deregister(&hpwdt_miscdev); |
| hpwdt_exit_nmi_decoding(); |
| pci_iounmap(dev, pci_mem_addr); |
| pci_disable_device(dev); |
| } |
| |
| static struct pci_driver hpwdt_driver = { |
| .name = "hpwdt", |
| .id_table = hpwdt_devices, |
| .probe = hpwdt_init_one, |
| .remove = hpwdt_exit, |
| }; |
| |
| MODULE_AUTHOR("Tom Mingarelli"); |
| MODULE_DESCRIPTION("hp watchdog driver"); |
| MODULE_LICENSE("GPL"); |
| MODULE_VERSION(HPWDT_VERSION); |
| |
| module_param(soft_margin, int, 0); |
| MODULE_PARM_DESC(soft_margin, "Watchdog timeout in seconds"); |
| |
| module_param(nowayout, bool, 0); |
| MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" |
| __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); |
| |
| #ifdef CONFIG_HPWDT_NMI_DECODING |
| module_param(allow_kdump, int, 0); |
| MODULE_PARM_DESC(allow_kdump, "Start a kernel dump after NMI occurs"); |
| #endif /* !CONFIG_HPWDT_NMI_DECODING */ |
| |
| module_pci_driver(hpwdt_driver); |