| #ifdef __KERNEL__ |
| #ifndef _ASM_POWERPC_IRQ_H |
| #define _ASM_POWERPC_IRQ_H |
| |
| /* |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License |
| * as published by the Free Software Foundation; either version |
| * 2 of the License, or (at your option) any later version. |
| */ |
| |
| #include <linux/threads.h> |
| |
| #include <asm/types.h> |
| #include <asm/atomic.h> |
| |
| /* this number is used when no interrupt has been assigned */ |
| #define NO_IRQ (-1) |
| |
| /* |
| * These constants are used for passing information about interrupt |
| * signal polarity and level/edge sensing to the low-level PIC chip |
| * drivers. |
| */ |
| #define IRQ_SENSE_MASK 0x1 |
| #define IRQ_SENSE_LEVEL 0x1 /* interrupt on active level */ |
| #define IRQ_SENSE_EDGE 0x0 /* interrupt triggered by edge */ |
| |
| #define IRQ_POLARITY_MASK 0x2 |
| #define IRQ_POLARITY_POSITIVE 0x2 /* high level or low->high edge */ |
| #define IRQ_POLARITY_NEGATIVE 0x0 /* low level or high->low edge */ |
| |
| /* |
| * IRQ line status macro IRQ_PER_CPU is used |
| */ |
| #define ARCH_HAS_IRQ_PER_CPU |
| |
| #define get_irq_desc(irq) (&irq_desc[(irq)]) |
| |
| /* Define a way to iterate across irqs. */ |
| #define for_each_irq(i) \ |
| for ((i) = 0; (i) < NR_IRQS; ++(i)) |
| |
| #ifdef CONFIG_PPC64 |
| |
| /* |
| * Maximum number of interrupt sources that we can handle. |
| */ |
| #define NR_IRQS 512 |
| |
| /* Interrupt numbers are virtual in case they are sparsely |
| * distributed by the hardware. |
| */ |
| extern unsigned int virt_irq_to_real_map[NR_IRQS]; |
| |
| /* The maximum virtual IRQ number that we support. This |
| * can be set by the platform and will be reduced by the |
| * value of __irq_offset_value. It defaults to and is |
| * capped by (NR_IRQS - 1). |
| */ |
| extern unsigned int virt_irq_max; |
| |
| /* Create a mapping for a real_irq if it doesn't already exist. |
| * Return the virtual irq as a convenience. |
| */ |
| int virt_irq_create_mapping(unsigned int real_irq); |
| void virt_irq_init(void); |
| |
| static inline unsigned int virt_irq_to_real(unsigned int virt_irq) |
| { |
| return virt_irq_to_real_map[virt_irq]; |
| } |
| |
| extern unsigned int real_irq_to_virt_slowpath(unsigned int real_irq); |
| |
| /* |
| * List of interrupt controllers. |
| */ |
| #define IC_INVALID 0 |
| #define IC_OPEN_PIC 1 |
| #define IC_PPC_XIC 2 |
| #define IC_CELL_PIC 3 |
| #define IC_ISERIES 4 |
| |
| extern u64 ppc64_interrupt_controller; |
| |
| #else /* 32-bit */ |
| |
| #if defined(CONFIG_40x) |
| #include <asm/ibm4xx.h> |
| |
| #ifndef NR_BOARD_IRQS |
| #define NR_BOARD_IRQS 0 |
| #endif |
| |
| #ifndef UIC_WIDTH /* Number of interrupts per device */ |
| #define UIC_WIDTH 32 |
| #endif |
| |
| #ifndef NR_UICS /* number of UIC devices */ |
| #define NR_UICS 1 |
| #endif |
| |
| #if defined (CONFIG_403) |
| /* |
| * The PowerPC 403 cores' Asynchronous Interrupt Controller (AIC) has |
| * 32 possible interrupts, a majority of which are not implemented on |
| * all cores. There are six configurable, external interrupt pins and |
| * there are eight internal interrupts for the on-chip serial port |
| * (SPU), DMA controller, and JTAG controller. |
| * |
| */ |
| |
| #define NR_AIC_IRQS 32 |
| #define NR_IRQS (NR_AIC_IRQS + NR_BOARD_IRQS) |
| |
| #elif !defined (CONFIG_403) |
| |
| /* |
| * The PowerPC 405 cores' Universal Interrupt Controller (UIC) has 32 |
| * possible interrupts as well. There are seven, configurable external |
| * interrupt pins and there are 17 internal interrupts for the on-chip |
| * serial port, DMA controller, on-chip Ethernet controller, PCI, etc. |
| * |
| */ |
| |
| |
| #define NR_UIC_IRQS UIC_WIDTH |
| #define NR_IRQS ((NR_UIC_IRQS * NR_UICS) + NR_BOARD_IRQS) |
| #endif |
| |
| #elif defined(CONFIG_44x) |
| #include <asm/ibm44x.h> |
| |
| #define NR_UIC_IRQS 32 |
| #define NR_IRQS ((NR_UIC_IRQS * NR_UICS) + NR_BOARD_IRQS) |
| |
| #elif defined(CONFIG_8xx) |
| |
| /* Now include the board configuration specific associations. |
| */ |
| #include <asm/mpc8xx.h> |
| |
| /* The MPC8xx cores have 16 possible interrupts. There are eight |
| * possible level sensitive interrupts assigned and generated internally |
| * from such devices as CPM, PCMCIA, RTC, PIT, TimeBase and Decrementer. |
| * There are eight external interrupts (IRQs) that can be configured |
| * as either level or edge sensitive. |
| * |
| * On some implementations, there is also the possibility of an 8259 |
| * through the PCI and PCI-ISA bridges. |
| * |
| * We are "flattening" the interrupt vectors of the cascaded CPM |
| * and 8259 interrupt controllers so that we can uniquely identify |
| * any interrupt source with a single integer. |
| */ |
| #define NR_SIU_INTS 16 |
| #define NR_CPM_INTS 32 |
| #ifndef NR_8259_INTS |
| #define NR_8259_INTS 0 |
| #endif |
| |
| #define SIU_IRQ_OFFSET 0 |
| #define CPM_IRQ_OFFSET (SIU_IRQ_OFFSET + NR_SIU_INTS) |
| #define I8259_IRQ_OFFSET (CPM_IRQ_OFFSET + NR_CPM_INTS) |
| |
| #define NR_IRQS (NR_SIU_INTS + NR_CPM_INTS + NR_8259_INTS) |
| |
| /* These values must be zero-based and map 1:1 with the SIU configuration. |
| * They are used throughout the 8xx I/O subsystem to generate |
| * interrupt masks, flags, and other control patterns. This is why the |
| * current kernel assumption of the 8259 as the base controller is such |
| * a pain in the butt. |
| */ |
| #define SIU_IRQ0 (0) /* Highest priority */ |
| #define SIU_LEVEL0 (1) |
| #define SIU_IRQ1 (2) |
| #define SIU_LEVEL1 (3) |
| #define SIU_IRQ2 (4) |
| #define SIU_LEVEL2 (5) |
| #define SIU_IRQ3 (6) |
| #define SIU_LEVEL3 (7) |
| #define SIU_IRQ4 (8) |
| #define SIU_LEVEL4 (9) |
| #define SIU_IRQ5 (10) |
| #define SIU_LEVEL5 (11) |
| #define SIU_IRQ6 (12) |
| #define SIU_LEVEL6 (13) |
| #define SIU_IRQ7 (14) |
| #define SIU_LEVEL7 (15) |
| |
| #define MPC8xx_INT_FEC1 SIU_LEVEL1 |
| #define MPC8xx_INT_FEC2 SIU_LEVEL3 |
| |
| #define MPC8xx_INT_SCC1 (CPM_IRQ_OFFSET + CPMVEC_SCC1) |
| #define MPC8xx_INT_SCC2 (CPM_IRQ_OFFSET + CPMVEC_SCC2) |
| #define MPC8xx_INT_SCC3 (CPM_IRQ_OFFSET + CPMVEC_SCC3) |
| #define MPC8xx_INT_SCC4 (CPM_IRQ_OFFSET + CPMVEC_SCC4) |
| #define MPC8xx_INT_SMC1 (CPM_IRQ_OFFSET + CPMVEC_SMC1) |
| #define MPC8xx_INT_SMC2 (CPM_IRQ_OFFSET + CPMVEC_SMC2) |
| |
| /* The internal interrupts we can configure as we see fit. |
| * My personal preference is CPM at level 2, which puts it above the |
| * MBX PCI/ISA/IDE interrupts. |
| */ |
| #ifndef PIT_INTERRUPT |
| #define PIT_INTERRUPT SIU_LEVEL0 |
| #endif |
| #ifndef CPM_INTERRUPT |
| #define CPM_INTERRUPT SIU_LEVEL2 |
| #endif |
| #ifndef PCMCIA_INTERRUPT |
| #define PCMCIA_INTERRUPT SIU_LEVEL6 |
| #endif |
| #ifndef DEC_INTERRUPT |
| #define DEC_INTERRUPT SIU_LEVEL7 |
| #endif |
| |
| /* Some internal interrupt registers use an 8-bit mask for the interrupt |
| * level instead of a number. |
| */ |
| #define mk_int_int_mask(IL) (1 << (7 - (IL/2))) |
| |
| #elif defined(CONFIG_83xx) |
| #include <asm/mpc83xx.h> |
| |
| #define NR_IRQS (NR_IPIC_INTS) |
| |
| #elif defined(CONFIG_85xx) |
| /* Now include the board configuration specific associations. |
| */ |
| #include <asm/mpc85xx.h> |
| |
| /* The MPC8548 openpic has 48 internal interrupts and 12 external |
| * interrupts. |
| * |
| * We are "flattening" the interrupt vectors of the cascaded CPM |
| * so that we can uniquely identify any interrupt source with a |
| * single integer. |
| */ |
| #define NR_CPM_INTS 64 |
| #define NR_EPIC_INTS 60 |
| #ifndef NR_8259_INTS |
| #define NR_8259_INTS 0 |
| #endif |
| #define NUM_8259_INTERRUPTS NR_8259_INTS |
| |
| #ifndef CPM_IRQ_OFFSET |
| #define CPM_IRQ_OFFSET 0 |
| #endif |
| |
| #define NR_IRQS (NR_EPIC_INTS + NR_CPM_INTS + NR_8259_INTS) |
| |
| /* Internal IRQs on MPC85xx OpenPIC */ |
| |
| #ifndef MPC85xx_OPENPIC_IRQ_OFFSET |
| #ifdef CONFIG_CPM2 |
| #define MPC85xx_OPENPIC_IRQ_OFFSET (CPM_IRQ_OFFSET + NR_CPM_INTS) |
| #else |
| #define MPC85xx_OPENPIC_IRQ_OFFSET 0 |
| #endif |
| #endif |
| |
| /* Not all of these exist on all MPC85xx implementations */ |
| #define MPC85xx_IRQ_L2CACHE ( 0 + MPC85xx_OPENPIC_IRQ_OFFSET) |
| #define MPC85xx_IRQ_ECM ( 1 + MPC85xx_OPENPIC_IRQ_OFFSET) |
| #define MPC85xx_IRQ_DDR ( 2 + MPC85xx_OPENPIC_IRQ_OFFSET) |
| #define MPC85xx_IRQ_LBIU ( 3 + MPC85xx_OPENPIC_IRQ_OFFSET) |
| #define MPC85xx_IRQ_DMA0 ( 4 + MPC85xx_OPENPIC_IRQ_OFFSET) |
| #define MPC85xx_IRQ_DMA1 ( 5 + MPC85xx_OPENPIC_IRQ_OFFSET) |
| #define MPC85xx_IRQ_DMA2 ( 6 + MPC85xx_OPENPIC_IRQ_OFFSET) |
| #define MPC85xx_IRQ_DMA3 ( 7 + MPC85xx_OPENPIC_IRQ_OFFSET) |
| #define MPC85xx_IRQ_PCI1 ( 8 + MPC85xx_OPENPIC_IRQ_OFFSET) |
| #define MPC85xx_IRQ_PCI2 ( 9 + MPC85xx_OPENPIC_IRQ_OFFSET) |
| #define MPC85xx_IRQ_RIO_ERROR ( 9 + MPC85xx_OPENPIC_IRQ_OFFSET) |
| #define MPC85xx_IRQ_RIO_BELL (10 + MPC85xx_OPENPIC_IRQ_OFFSET) |
| #define MPC85xx_IRQ_RIO_TX (11 + MPC85xx_OPENPIC_IRQ_OFFSET) |
| #define MPC85xx_IRQ_RIO_RX (12 + MPC85xx_OPENPIC_IRQ_OFFSET) |
| #define MPC85xx_IRQ_TSEC1_TX (13 + MPC85xx_OPENPIC_IRQ_OFFSET) |
| #define MPC85xx_IRQ_TSEC1_RX (14 + MPC85xx_OPENPIC_IRQ_OFFSET) |
| #define MPC85xx_IRQ_TSEC3_TX (15 + MPC85xx_OPENPIC_IRQ_OFFSET) |
| #define MPC85xx_IRQ_TSEC3_RX (16 + MPC85xx_OPENPIC_IRQ_OFFSET) |
| #define MPC85xx_IRQ_TSEC3_ERROR (17 + MPC85xx_OPENPIC_IRQ_OFFSET) |
| #define MPC85xx_IRQ_TSEC1_ERROR (18 + MPC85xx_OPENPIC_IRQ_OFFSET) |
| #define MPC85xx_IRQ_TSEC2_TX (19 + MPC85xx_OPENPIC_IRQ_OFFSET) |
| #define MPC85xx_IRQ_TSEC2_RX (20 + MPC85xx_OPENPIC_IRQ_OFFSET) |
| #define MPC85xx_IRQ_TSEC4_TX (21 + MPC85xx_OPENPIC_IRQ_OFFSET) |
| #define MPC85xx_IRQ_TSEC4_RX (22 + MPC85xx_OPENPIC_IRQ_OFFSET) |
| #define MPC85xx_IRQ_TSEC4_ERROR (23 + MPC85xx_OPENPIC_IRQ_OFFSET) |
| #define MPC85xx_IRQ_TSEC2_ERROR (24 + MPC85xx_OPENPIC_IRQ_OFFSET) |
| #define MPC85xx_IRQ_FEC (25 + MPC85xx_OPENPIC_IRQ_OFFSET) |
| #define MPC85xx_IRQ_DUART (26 + MPC85xx_OPENPIC_IRQ_OFFSET) |
| #define MPC85xx_IRQ_IIC1 (27 + MPC85xx_OPENPIC_IRQ_OFFSET) |
| #define MPC85xx_IRQ_PERFMON (28 + MPC85xx_OPENPIC_IRQ_OFFSET) |
| #define MPC85xx_IRQ_SEC2 (29 + MPC85xx_OPENPIC_IRQ_OFFSET) |
| #define MPC85xx_IRQ_CPM (30 + MPC85xx_OPENPIC_IRQ_OFFSET) |
| |
| /* The 12 external interrupt lines */ |
| #define MPC85xx_IRQ_EXT0 (48 + MPC85xx_OPENPIC_IRQ_OFFSET) |
| #define MPC85xx_IRQ_EXT1 (49 + MPC85xx_OPENPIC_IRQ_OFFSET) |
| #define MPC85xx_IRQ_EXT2 (50 + MPC85xx_OPENPIC_IRQ_OFFSET) |
| #define MPC85xx_IRQ_EXT3 (51 + MPC85xx_OPENPIC_IRQ_OFFSET) |
| #define MPC85xx_IRQ_EXT4 (52 + MPC85xx_OPENPIC_IRQ_OFFSET) |
| #define MPC85xx_IRQ_EXT5 (53 + MPC85xx_OPENPIC_IRQ_OFFSET) |
| #define MPC85xx_IRQ_EXT6 (54 + MPC85xx_OPENPIC_IRQ_OFFSET) |
| #define MPC85xx_IRQ_EXT7 (55 + MPC85xx_OPENPIC_IRQ_OFFSET) |
| #define MPC85xx_IRQ_EXT8 (56 + MPC85xx_OPENPIC_IRQ_OFFSET) |
| #define MPC85xx_IRQ_EXT9 (57 + MPC85xx_OPENPIC_IRQ_OFFSET) |
| #define MPC85xx_IRQ_EXT10 (58 + MPC85xx_OPENPIC_IRQ_OFFSET) |
| #define MPC85xx_IRQ_EXT11 (59 + MPC85xx_OPENPIC_IRQ_OFFSET) |
| |
| /* CPM related interrupts */ |
| #define SIU_INT_ERROR ((uint)0x00+CPM_IRQ_OFFSET) |
| #define SIU_INT_I2C ((uint)0x01+CPM_IRQ_OFFSET) |
| #define SIU_INT_SPI ((uint)0x02+CPM_IRQ_OFFSET) |
| #define SIU_INT_RISC ((uint)0x03+CPM_IRQ_OFFSET) |
| #define SIU_INT_SMC1 ((uint)0x04+CPM_IRQ_OFFSET) |
| #define SIU_INT_SMC2 ((uint)0x05+CPM_IRQ_OFFSET) |
| #define SIU_INT_USB ((uint)0x0b+CPM_IRQ_OFFSET) |
| #define SIU_INT_TIMER1 ((uint)0x0c+CPM_IRQ_OFFSET) |
| #define SIU_INT_TIMER2 ((uint)0x0d+CPM_IRQ_OFFSET) |
| #define SIU_INT_TIMER3 ((uint)0x0e+CPM_IRQ_OFFSET) |
| #define SIU_INT_TIMER4 ((uint)0x0f+CPM_IRQ_OFFSET) |
| #define SIU_INT_FCC1 ((uint)0x20+CPM_IRQ_OFFSET) |
| #define SIU_INT_FCC2 ((uint)0x21+CPM_IRQ_OFFSET) |
| #define SIU_INT_FCC3 ((uint)0x22+CPM_IRQ_OFFSET) |
| #define SIU_INT_MCC1 ((uint)0x24+CPM_IRQ_OFFSET) |
| #define SIU_INT_MCC2 ((uint)0x25+CPM_IRQ_OFFSET) |
| #define SIU_INT_SCC1 ((uint)0x28+CPM_IRQ_OFFSET) |
| #define SIU_INT_SCC2 ((uint)0x29+CPM_IRQ_OFFSET) |
| #define SIU_INT_SCC3 ((uint)0x2a+CPM_IRQ_OFFSET) |
| #define SIU_INT_SCC4 ((uint)0x2b+CPM_IRQ_OFFSET) |
| #define SIU_INT_PC15 ((uint)0x30+CPM_IRQ_OFFSET) |
| #define SIU_INT_PC14 ((uint)0x31+CPM_IRQ_OFFSET) |
| #define SIU_INT_PC13 ((uint)0x32+CPM_IRQ_OFFSET) |
| #define SIU_INT_PC12 ((uint)0x33+CPM_IRQ_OFFSET) |
| #define SIU_INT_PC11 ((uint)0x34+CPM_IRQ_OFFSET) |
| #define SIU_INT_PC10 ((uint)0x35+CPM_IRQ_OFFSET) |
| #define SIU_INT_PC9 ((uint)0x36+CPM_IRQ_OFFSET) |
| #define SIU_INT_PC8 ((uint)0x37+CPM_IRQ_OFFSET) |
| #define SIU_INT_PC7 ((uint)0x38+CPM_IRQ_OFFSET) |
| #define SIU_INT_PC6 ((uint)0x39+CPM_IRQ_OFFSET) |
| #define SIU_INT_PC5 ((uint)0x3a+CPM_IRQ_OFFSET) |
| #define SIU_INT_PC4 ((uint)0x3b+CPM_IRQ_OFFSET) |
| #define SIU_INT_PC3 ((uint)0x3c+CPM_IRQ_OFFSET) |
| #define SIU_INT_PC2 ((uint)0x3d+CPM_IRQ_OFFSET) |
| #define SIU_INT_PC1 ((uint)0x3e+CPM_IRQ_OFFSET) |
| #define SIU_INT_PC0 ((uint)0x3f+CPM_IRQ_OFFSET) |
| |
| #elif defined(CONFIG_PPC_86xx) |
| #include <asm/mpc86xx.h> |
| |
| #define NR_EPIC_INTS 48 |
| #ifndef NR_8259_INTS |
| #define NR_8259_INTS 16 /*ULI 1575 can route 12 interrupts */ |
| #endif |
| #define NUM_8259_INTERRUPTS NR_8259_INTS |
| |
| #ifndef I8259_OFFSET |
| #define I8259_OFFSET 0 |
| #endif |
| |
| #define NR_IRQS 256 |
| |
| /* Internal IRQs on MPC86xx OpenPIC */ |
| |
| #ifndef MPC86xx_OPENPIC_IRQ_OFFSET |
| #define MPC86xx_OPENPIC_IRQ_OFFSET NR_8259_INTS |
| #endif |
| |
| /* The 48 internal sources */ |
| #define MPC86xx_IRQ_NULL ( 0 + MPC86xx_OPENPIC_IRQ_OFFSET) |
| #define MPC86xx_IRQ_MCM ( 1 + MPC86xx_OPENPIC_IRQ_OFFSET) |
| #define MPC86xx_IRQ_DDR ( 2 + MPC86xx_OPENPIC_IRQ_OFFSET) |
| #define MPC86xx_IRQ_LBC ( 3 + MPC86xx_OPENPIC_IRQ_OFFSET) |
| #define MPC86xx_IRQ_DMA0 ( 4 + MPC86xx_OPENPIC_IRQ_OFFSET) |
| #define MPC86xx_IRQ_DMA1 ( 5 + MPC86xx_OPENPIC_IRQ_OFFSET) |
| #define MPC86xx_IRQ_DMA2 ( 6 + MPC86xx_OPENPIC_IRQ_OFFSET) |
| #define MPC86xx_IRQ_DMA3 ( 7 + MPC86xx_OPENPIC_IRQ_OFFSET) |
| |
| /* no 10,11 */ |
| #define MPC86xx_IRQ_UART2 (12 + MPC86xx_OPENPIC_IRQ_OFFSET) |
| #define MPC86xx_IRQ_TSEC1_TX (13 + MPC86xx_OPENPIC_IRQ_OFFSET) |
| #define MPC86xx_IRQ_TSEC1_RX (14 + MPC86xx_OPENPIC_IRQ_OFFSET) |
| #define MPC86xx_IRQ_TSEC3_TX (15 + MPC86xx_OPENPIC_IRQ_OFFSET) |
| #define MPC86xx_IRQ_TSEC3_RX (16 + MPC86xx_OPENPIC_IRQ_OFFSET) |
| #define MPC86xx_IRQ_TSEC3_ERROR (17 + MPC86xx_OPENPIC_IRQ_OFFSET) |
| #define MPC86xx_IRQ_TSEC1_ERROR (18 + MPC86xx_OPENPIC_IRQ_OFFSET) |
| #define MPC86xx_IRQ_TSEC2_TX (19 + MPC86xx_OPENPIC_IRQ_OFFSET) |
| #define MPC86xx_IRQ_TSEC2_RX (20 + MPC86xx_OPENPIC_IRQ_OFFSET) |
| #define MPC86xx_IRQ_TSEC4_TX (21 + MPC86xx_OPENPIC_IRQ_OFFSET) |
| #define MPC86xx_IRQ_TSEC4_RX (22 + MPC86xx_OPENPIC_IRQ_OFFSET) |
| #define MPC86xx_IRQ_TSEC4_ERROR (23 + MPC86xx_OPENPIC_IRQ_OFFSET) |
| #define MPC86xx_IRQ_TSEC2_ERROR (24 + MPC86xx_OPENPIC_IRQ_OFFSET) |
| /* no 25 */ |
| #define MPC86xx_IRQ_UART1 (26 + MPC86xx_OPENPIC_IRQ_OFFSET) |
| #define MPC86xx_IRQ_IIC (27 + MPC86xx_OPENPIC_IRQ_OFFSET) |
| #define MPC86xx_IRQ_PERFMON (28 + MPC86xx_OPENPIC_IRQ_OFFSET) |
| /* no 29,30,31 */ |
| #define MPC86xx_IRQ_SRIO_ERROR (32 + MPC86xx_OPENPIC_IRQ_OFFSET) |
| #define MPC86xx_IRQ_SRIO_OUT_BELL (33 + MPC86xx_OPENPIC_IRQ_OFFSET) |
| #define MPC86xx_IRQ_SRIO_IN_BELL (34 + MPC86xx_OPENPIC_IRQ_OFFSET) |
| /* no 35,36 */ |
| #define MPC86xx_IRQ_SRIO_OUT_MSG1 (37 + MPC86xx_OPENPIC_IRQ_OFFSET) |
| #define MPC86xx_IRQ_SRIO_IN_MSG1 (38 + MPC86xx_OPENPIC_IRQ_OFFSET) |
| #define MPC86xx_IRQ_SRIO_OUT_MSG2 (39 + MPC86xx_OPENPIC_IRQ_OFFSET) |
| #define MPC86xx_IRQ_SRIO_IN_MSG2 (40 + MPC86xx_OPENPIC_IRQ_OFFSET) |
| |
| /* The 12 external interrupt lines */ |
| #define MPC86xx_IRQ_EXT_BASE 48 |
| #define MPC86xx_IRQ_EXT0 (0 + MPC86xx_IRQ_EXT_BASE \ |
| + MPC86xx_OPENPIC_IRQ_OFFSET) |
| #define MPC86xx_IRQ_EXT1 (1 + MPC86xx_IRQ_EXT_BASE \ |
| + MPC86xx_OPENPIC_IRQ_OFFSET) |
| #define MPC86xx_IRQ_EXT2 (2 + MPC86xx_IRQ_EXT_BASE \ |
| + MPC86xx_OPENPIC_IRQ_OFFSET) |
| #define MPC86xx_IRQ_EXT3 (3 + MPC86xx_IRQ_EXT_BASE \ |
| + MPC86xx_OPENPIC_IRQ_OFFSET) |
| #define MPC86xx_IRQ_EXT4 (4 + MPC86xx_IRQ_EXT_BASE \ |
| + MPC86xx_OPENPIC_IRQ_OFFSET) |
| #define MPC86xx_IRQ_EXT5 (5 + MPC86xx_IRQ_EXT_BASE \ |
| + MPC86xx_OPENPIC_IRQ_OFFSET) |
| #define MPC86xx_IRQ_EXT6 (6 + MPC86xx_IRQ_EXT_BASE \ |
| + MPC86xx_OPENPIC_IRQ_OFFSET) |
| #define MPC86xx_IRQ_EXT7 (7 + MPC86xx_IRQ_EXT_BASE \ |
| + MPC86xx_OPENPIC_IRQ_OFFSET) |
| #define MPC86xx_IRQ_EXT8 (8 + MPC86xx_IRQ_EXT_BASE \ |
| + MPC86xx_OPENPIC_IRQ_OFFSET) |
| #define MPC86xx_IRQ_EXT9 (9 + MPC86xx_IRQ_EXT_BASE \ |
| + MPC86xx_OPENPIC_IRQ_OFFSET) |
| #define MPC86xx_IRQ_EXT10 (10 + MPC86xx_IRQ_EXT_BASE \ |
| + MPC86xx_OPENPIC_IRQ_OFFSET) |
| #define MPC86xx_IRQ_EXT11 (11 + MPC86xx_IRQ_EXT_BASE \ |
| + MPC86xx_OPENPIC_IRQ_OFFSET) |
| |
| #else /* CONFIG_40x + CONFIG_8xx */ |
| /* |
| * this is the # irq's for all ppc arch's (pmac/chrp/prep) |
| * so it is the max of them all |
| */ |
| #define NR_IRQS 256 |
| #define __DO_IRQ_CANON 1 |
| |
| #ifndef CONFIG_8260 |
| |
| #define NUM_8259_INTERRUPTS 16 |
| |
| #else /* CONFIG_8260 */ |
| |
| /* The 8260 has an internal interrupt controller with a maximum of |
| * 64 IRQs. We will use NR_IRQs from above since it is large enough. |
| * Don't be confused by the 8260 documentation where they list an |
| * "interrupt number" and "interrupt vector". We are only interested |
| * in the interrupt vector. There are "reserved" holes where the |
| * vector number increases, but the interrupt number in the table does not. |
| * (Document errata updates have fixed this...make sure you have up to |
| * date processor documentation -- Dan). |
| */ |
| |
| #ifndef CPM_IRQ_OFFSET |
| #define CPM_IRQ_OFFSET 0 |
| #endif |
| |
| #define NR_CPM_INTS 64 |
| |
| #define SIU_INT_ERROR ((uint)0x00 + CPM_IRQ_OFFSET) |
| #define SIU_INT_I2C ((uint)0x01 + CPM_IRQ_OFFSET) |
| #define SIU_INT_SPI ((uint)0x02 + CPM_IRQ_OFFSET) |
| #define SIU_INT_RISC ((uint)0x03 + CPM_IRQ_OFFSET) |
| #define SIU_INT_SMC1 ((uint)0x04 + CPM_IRQ_OFFSET) |
| #define SIU_INT_SMC2 ((uint)0x05 + CPM_IRQ_OFFSET) |
| #define SIU_INT_IDMA1 ((uint)0x06 + CPM_IRQ_OFFSET) |
| #define SIU_INT_IDMA2 ((uint)0x07 + CPM_IRQ_OFFSET) |
| #define SIU_INT_IDMA3 ((uint)0x08 + CPM_IRQ_OFFSET) |
| #define SIU_INT_IDMA4 ((uint)0x09 + CPM_IRQ_OFFSET) |
| #define SIU_INT_SDMA ((uint)0x0a + CPM_IRQ_OFFSET) |
| #define SIU_INT_USB ((uint)0x0b + CPM_IRQ_OFFSET) |
| #define SIU_INT_TIMER1 ((uint)0x0c + CPM_IRQ_OFFSET) |
| #define SIU_INT_TIMER2 ((uint)0x0d + CPM_IRQ_OFFSET) |
| #define SIU_INT_TIMER3 ((uint)0x0e + CPM_IRQ_OFFSET) |
| #define SIU_INT_TIMER4 ((uint)0x0f + CPM_IRQ_OFFSET) |
| #define SIU_INT_TMCNT ((uint)0x10 + CPM_IRQ_OFFSET) |
| #define SIU_INT_PIT ((uint)0x11 + CPM_IRQ_OFFSET) |
| #define SIU_INT_PCI ((uint)0x12 + CPM_IRQ_OFFSET) |
| #define SIU_INT_IRQ1 ((uint)0x13 + CPM_IRQ_OFFSET) |
| #define SIU_INT_IRQ2 ((uint)0x14 + CPM_IRQ_OFFSET) |
| #define SIU_INT_IRQ3 ((uint)0x15 + CPM_IRQ_OFFSET) |
| #define SIU_INT_IRQ4 ((uint)0x16 + CPM_IRQ_OFFSET) |
| #define SIU_INT_IRQ5 ((uint)0x17 + CPM_IRQ_OFFSET) |
| #define SIU_INT_IRQ6 ((uint)0x18 + CPM_IRQ_OFFSET) |
| #define SIU_INT_IRQ7 ((uint)0x19 + CPM_IRQ_OFFSET) |
| #define SIU_INT_FCC1 ((uint)0x20 + CPM_IRQ_OFFSET) |
| #define SIU_INT_FCC2 ((uint)0x21 + CPM_IRQ_OFFSET) |
| #define SIU_INT_FCC3 ((uint)0x22 + CPM_IRQ_OFFSET) |
| #define SIU_INT_MCC1 ((uint)0x24 + CPM_IRQ_OFFSET) |
| #define SIU_INT_MCC2 ((uint)0x25 + CPM_IRQ_OFFSET) |
| #define SIU_INT_SCC1 ((uint)0x28 + CPM_IRQ_OFFSET) |
| #define SIU_INT_SCC2 ((uint)0x29 + CPM_IRQ_OFFSET) |
| #define SIU_INT_SCC3 ((uint)0x2a + CPM_IRQ_OFFSET) |
| #define SIU_INT_SCC4 ((uint)0x2b + CPM_IRQ_OFFSET) |
| #define SIU_INT_PC15 ((uint)0x30 + CPM_IRQ_OFFSET) |
| #define SIU_INT_PC14 ((uint)0x31 + CPM_IRQ_OFFSET) |
| #define SIU_INT_PC13 ((uint)0x32 + CPM_IRQ_OFFSET) |
| #define SIU_INT_PC12 ((uint)0x33 + CPM_IRQ_OFFSET) |
| #define SIU_INT_PC11 ((uint)0x34 + CPM_IRQ_OFFSET) |
| #define SIU_INT_PC10 ((uint)0x35 + CPM_IRQ_OFFSET) |
| #define SIU_INT_PC9 ((uint)0x36 + CPM_IRQ_OFFSET) |
| #define SIU_INT_PC8 ((uint)0x37 + CPM_IRQ_OFFSET) |
| #define SIU_INT_PC7 ((uint)0x38 + CPM_IRQ_OFFSET) |
| #define SIU_INT_PC6 ((uint)0x39 + CPM_IRQ_OFFSET) |
| #define SIU_INT_PC5 ((uint)0x3a + CPM_IRQ_OFFSET) |
| #define SIU_INT_PC4 ((uint)0x3b + CPM_IRQ_OFFSET) |
| #define SIU_INT_PC3 ((uint)0x3c + CPM_IRQ_OFFSET) |
| #define SIU_INT_PC2 ((uint)0x3d + CPM_IRQ_OFFSET) |
| #define SIU_INT_PC1 ((uint)0x3e + CPM_IRQ_OFFSET) |
| #define SIU_INT_PC0 ((uint)0x3f + CPM_IRQ_OFFSET) |
| |
| #endif /* CONFIG_8260 */ |
| |
| #endif |
| |
| #define NR_MASK_WORDS ((NR_IRQS + 31) / 32) |
| /* pedantic: these are long because they are used with set_bit --RR */ |
| extern unsigned long ppc_cached_irq_mask[NR_MASK_WORDS]; |
| extern atomic_t ppc_n_lost_interrupts; |
| |
| #define virt_irq_create_mapping(x) (x) |
| |
| #endif |
| |
| /* |
| * Because many systems have two overlapping names spaces for |
| * interrupts (ISA and XICS for example), and the ISA interrupts |
| * have historically not been easy to renumber, we allow ISA |
| * interrupts to take values 0 - 15, and shift up the remaining |
| * interrupts by 0x10. |
| */ |
| #define NUM_ISA_INTERRUPTS 0x10 |
| extern int __irq_offset_value; |
| |
| static inline int irq_offset_up(int irq) |
| { |
| return(irq + __irq_offset_value); |
| } |
| |
| static inline int irq_offset_down(int irq) |
| { |
| return(irq - __irq_offset_value); |
| } |
| |
| static inline int irq_offset_value(void) |
| { |
| return __irq_offset_value; |
| } |
| |
| #ifdef __DO_IRQ_CANON |
| extern int ppc_do_canonicalize_irqs; |
| #else |
| #define ppc_do_canonicalize_irqs 0 |
| #endif |
| |
| static __inline__ int irq_canonicalize(int irq) |
| { |
| if (ppc_do_canonicalize_irqs && irq == 2) |
| irq = 9; |
| return irq; |
| } |
| |
| extern int distribute_irqs; |
| |
| struct irqaction; |
| struct pt_regs; |
| |
| #define __ARCH_HAS_DO_SOFTIRQ |
| |
| extern void __do_softirq(void); |
| |
| #ifdef CONFIG_IRQSTACKS |
| /* |
| * Per-cpu stacks for handling hard and soft interrupts. |
| */ |
| extern struct thread_info *hardirq_ctx[NR_CPUS]; |
| extern struct thread_info *softirq_ctx[NR_CPUS]; |
| |
| extern void irq_ctx_init(void); |
| extern void call_do_softirq(struct thread_info *tp); |
| extern int call___do_IRQ(int irq, struct pt_regs *regs, |
| struct thread_info *tp); |
| |
| #else |
| #define irq_ctx_init() |
| |
| #endif /* CONFIG_IRQSTACKS */ |
| |
| extern void do_IRQ(struct pt_regs *regs); |
| |
| #endif /* _ASM_IRQ_H */ |
| #endif /* __KERNEL__ */ |