| /* |
| * ARM Ltd. Juno Platform |
| * |
| * Copyright (c) 2013-2014 ARM Ltd. |
| * |
| * This file is licensed under a dual GPLv2 or BSD license. |
| */ |
| |
| /dts-v1/; |
| |
| #include <dt-bindings/interrupt-controller/arm-gic.h> |
| |
| / { |
| model = "ARM Juno development board (r0)"; |
| compatible = "arm,juno", "arm,vexpress"; |
| interrupt-parent = <&gic>; |
| #address-cells = <2>; |
| #size-cells = <2>; |
| |
| aliases { |
| serial0 = &soc_uart0; |
| }; |
| |
| chosen { |
| stdout-path = "serial0:115200n8"; |
| }; |
| |
| psci { |
| compatible = "arm,psci-0.2"; |
| method = "smc"; |
| }; |
| |
| cpus { |
| #address-cells = <2>; |
| #size-cells = <0>; |
| |
| A57_0: cpu@0 { |
| compatible = "arm,cortex-a57","arm,armv8"; |
| reg = <0x0 0x0>; |
| device_type = "cpu"; |
| enable-method = "psci"; |
| }; |
| |
| A57_1: cpu@1 { |
| compatible = "arm,cortex-a57","arm,armv8"; |
| reg = <0x0 0x1>; |
| device_type = "cpu"; |
| enable-method = "psci"; |
| }; |
| |
| A53_0: cpu@100 { |
| compatible = "arm,cortex-a53","arm,armv8"; |
| reg = <0x0 0x100>; |
| device_type = "cpu"; |
| enable-method = "psci"; |
| }; |
| |
| A53_1: cpu@101 { |
| compatible = "arm,cortex-a53","arm,armv8"; |
| reg = <0x0 0x101>; |
| device_type = "cpu"; |
| enable-method = "psci"; |
| }; |
| |
| A53_2: cpu@102 { |
| compatible = "arm,cortex-a53","arm,armv8"; |
| reg = <0x0 0x102>; |
| device_type = "cpu"; |
| enable-method = "psci"; |
| }; |
| |
| A53_3: cpu@103 { |
| compatible = "arm,cortex-a53","arm,armv8"; |
| reg = <0x0 0x103>; |
| device_type = "cpu"; |
| enable-method = "psci"; |
| }; |
| }; |
| |
| memory@80000000 { |
| device_type = "memory"; |
| /* last 16MB of the first memory area is reserved for secure world use by firmware */ |
| reg = <0x00000000 0x80000000 0x0 0x7f000000>, |
| <0x00000008 0x80000000 0x1 0x80000000>; |
| }; |
| |
| gic: interrupt-controller@2c001000 { |
| compatible = "arm,gic-400", "arm,cortex-a15-gic"; |
| reg = <0x0 0x2c010000 0 0x1000>, |
| <0x0 0x2c02f000 0 0x2000>, |
| <0x0 0x2c04f000 0 0x2000>, |
| <0x0 0x2c06f000 0 0x2000>; |
| #address-cells = <0>; |
| #interrupt-cells = <3>; |
| interrupt-controller; |
| interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_HIGH)>; |
| }; |
| |
| timer { |
| compatible = "arm,armv8-timer"; |
| interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>, |
| <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>, |
| <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>, |
| <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>; |
| }; |
| |
| pmu { |
| compatible = "arm,armv8-pmuv3"; |
| interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 02 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 06 IRQ_TYPE_LEVEL_HIGH>; |
| }; |
| |
| /include/ "juno-clocks.dtsi" |
| |
| dma@7ff00000 { |
| compatible = "arm,pl330", "arm,primecell"; |
| reg = <0x0 0x7ff00000 0 0x1000>; |
| #dma-cells = <1>; |
| #dma-channels = <8>; |
| #dma-requests = <32>; |
| interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&soc_faxiclk>; |
| clock-names = "apb_pclk"; |
| }; |
| |
| soc_uart0: uart@7ff80000 { |
| compatible = "arm,pl011", "arm,primecell"; |
| reg = <0x0 0x7ff80000 0x0 0x1000>; |
| interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&soc_uartclk>, <&soc_refclk100mhz>; |
| clock-names = "uartclk", "apb_pclk"; |
| }; |
| |
| i2c@7ffa0000 { |
| compatible = "snps,designware-i2c"; |
| reg = <0x0 0x7ffa0000 0x0 0x1000>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>; |
| clock-frequency = <400000>; |
| i2c-sda-hold-time-ns = <500>; |
| clocks = <&soc_smc50mhz>; |
| |
| dvi0: dvi-transmitter@70 { |
| compatible = "nxp,tda998x"; |
| reg = <0x70>; |
| }; |
| |
| dvi1: dvi-transmitter@71 { |
| compatible = "nxp,tda998x"; |
| reg = <0x71>; |
| }; |
| }; |
| |
| ohci@7ffb0000 { |
| compatible = "generic-ohci"; |
| reg = <0x0 0x7ffb0000 0x0 0x10000>; |
| interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&soc_usb48mhz>; |
| }; |
| |
| ehci@7ffc0000 { |
| compatible = "generic-ehci"; |
| reg = <0x0 0x7ffc0000 0x0 0x10000>; |
| interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&soc_usb48mhz>; |
| }; |
| |
| memory-controller@7ffd0000 { |
| compatible = "arm,pl354", "arm,primecell"; |
| reg = <0 0x7ffd0000 0 0x1000>; |
| interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&soc_smc50mhz>; |
| clock-names = "apb_pclk"; |
| }; |
| |
| smb { |
| compatible = "simple-bus"; |
| #address-cells = <2>; |
| #size-cells = <1>; |
| ranges = <0 0 0 0x08000000 0x04000000>, |
| <1 0 0 0x14000000 0x04000000>, |
| <2 0 0 0x18000000 0x04000000>, |
| <3 0 0 0x1c000000 0x04000000>, |
| <4 0 0 0x0c000000 0x04000000>, |
| <5 0 0 0x10000000 0x04000000>; |
| |
| #interrupt-cells = <1>; |
| interrupt-map-mask = <0 0 15>; |
| interrupt-map = <0 0 0 &gic 0 68 IRQ_TYPE_LEVEL_HIGH>, |
| <0 0 1 &gic 0 69 IRQ_TYPE_LEVEL_HIGH>, |
| <0 0 2 &gic 0 70 IRQ_TYPE_LEVEL_HIGH>, |
| <0 0 3 &gic 0 160 IRQ_TYPE_LEVEL_HIGH>, |
| <0 0 4 &gic 0 161 IRQ_TYPE_LEVEL_HIGH>, |
| <0 0 5 &gic 0 162 IRQ_TYPE_LEVEL_HIGH>, |
| <0 0 6 &gic 0 163 IRQ_TYPE_LEVEL_HIGH>, |
| <0 0 7 &gic 0 164 IRQ_TYPE_LEVEL_HIGH>, |
| <0 0 8 &gic 0 165 IRQ_TYPE_LEVEL_HIGH>, |
| <0 0 9 &gic 0 166 IRQ_TYPE_LEVEL_HIGH>, |
| <0 0 10 &gic 0 167 IRQ_TYPE_LEVEL_HIGH>, |
| <0 0 11 &gic 0 168 IRQ_TYPE_LEVEL_HIGH>, |
| <0 0 12 &gic 0 169 IRQ_TYPE_LEVEL_HIGH>; |
| |
| /include/ "juno-motherboard.dtsi" |
| }; |
| }; |