[SCSI] qla4xxx: support iscsiadm session mgmt
Add scsi_transport_iscsi hooks in qla4xxx to support
iSCSI session management using iscsiadm.
This patch is based on discussion here
http://groups.google.com/group/open-iscsi/browse_thread/thread/e89fd888baf656a0#
Now users can use iscsiadm to do target discovery and do login/logout to
individual targets using the qla4xxx iSCSI class interface.
This patch leaves some dead code, but to make it easier to review
we are leaving and in the next patch we will remove that old code.
V2 - NOTE: Added code to avoid waiting for AEN during login/logout
in the driver, instead added a kernel to user event
to notify iscsid about login status. Because of this
iscsid will not get blocked.
Signed-off-by: Manish Rangankar <manish.rangankar@qlogic.com>
Signed-off-by: Lalit Chandivade <lalit.chandivade@qlogic.com>
Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
diff --git a/drivers/scsi/qla4xxx/ql4_init.c b/drivers/scsi/qla4xxx/ql4_init.c
index 3068012..ca6b2c5 100644
--- a/drivers/scsi/qla4xxx/ql4_init.c
+++ b/drivers/scsi/qla4xxx/ql4_init.c
@@ -48,22 +48,15 @@
* @ha: pointer to host adapter structure.
* @ddb_entry: pointer to device database entry
*
- * This routine deallocates and unlinks the specified ddb_entry from the
- * adapter's
+ * This routine marks a DDB entry INVALID
**/
void qla4xxx_free_ddb(struct scsi_qla_host *ha,
struct ddb_entry *ddb_entry)
{
- /* Remove device entry from list */
- list_del_init(&ddb_entry->list);
-
/* Remove device pointer from index mapping arrays */
ha->fw_ddb_index_map[ddb_entry->fw_ddb_index] =
(struct ddb_entry *) INVALID_ENTRY;
ha->tot_ddbs--;
-
- /* Free memory and scsi-ml struct for device entry */
- qla4xxx_destroy_sess(ddb_entry);
}
/**
@@ -820,7 +813,8 @@
((!ipv6_device &&
*((uint32_t *)fw_ddb_entry->ip_addr))
|| ipv6_device)) {
- qla4xxx_set_ddb_entry(ha, fw_ddb_index, 0);
+ qla4xxx_set_ddb_entry(ha, fw_ddb_index, 0,
+ NULL);
if (qla4xxx_get_fwddb_entry(ha, fw_ddb_index,
NULL, 0, NULL,
&next_fw_ddb_index,
@@ -927,7 +921,7 @@
ddb_entry->fw_ddb_index));
iscsi_unblock_session(ddb_entry->sess);
} else if (atomic_read(&ddb_entry->state) == DDB_STATE_ONLINE)
- qla4xxx_mark_device_missing(ha, ddb_entry);
+ qla4xxx_mark_device_missing(ddb_entry->sess);
}
return status;
}
@@ -952,7 +946,7 @@
DEBUG2(printk("scsi%ld: Relogin ddb [%d]. TOV=%d\n", ha->host_no,
ddb_entry->fw_ddb_index, relogin_timer));
- qla4xxx_set_ddb_entry(ha, ddb_entry->fw_ddb_index, 0);
+ qla4xxx_set_ddb_entry(ha, ddb_entry->fw_ddb_index, 0, NULL);
return QLA_SUCCESS;
}
@@ -1418,88 +1412,66 @@
uint32_t state, uint32_t conn_err)
{
struct ddb_entry * ddb_entry;
+ uint32_t old_fw_ddb_device_state;
+ int status = QLA_ERROR;
/* check for out of range index */
if (fw_ddb_index >= MAX_DDB_ENTRIES)
- return QLA_ERROR;
+ goto exit_ddb_event;
/* Get the corresponging ddb entry */
ddb_entry = qla4xxx_lookup_ddb_by_fw_index(ha, fw_ddb_index);
/* Device does not currently exist in our database. */
if (ddb_entry == NULL) {
- if (state == DDB_DS_SESSION_ACTIVE)
- qla4xxx_add_device_dynamically(ha, fw_ddb_index);
- return QLA_SUCCESS;
+ ql4_printk(KERN_ERR, ha, "%s: No ddb_entry at FW index [%d]\n",
+ __func__, fw_ddb_index);
+ goto exit_ddb_event;
}
- /* Device already exists in our database. */
- DEBUG2(printk("scsi%ld: %s DDB - old state= 0x%x, new state=0x%x for "
- "index [%d]\n", ha->host_no, __func__,
- ddb_entry->fw_ddb_device_state, state, fw_ddb_index));
+ old_fw_ddb_device_state = ddb_entry->fw_ddb_device_state;
+ DEBUG2(ql4_printk(KERN_INFO, ha,
+ "%s: DDB - old state = 0x%x, new state = 0x%x for "
+ "index [%d]\n", __func__,
+ ddb_entry->fw_ddb_device_state, state, fw_ddb_index));
ddb_entry->fw_ddb_device_state = state;
- /* Device is back online. */
- if ((ddb_entry->fw_ddb_device_state == DDB_DS_SESSION_ACTIVE) &&
- (atomic_read(&ddb_entry->state) != DDB_STATE_ONLINE)) {
- atomic_set(&ddb_entry->state, DDB_STATE_ONLINE);
- atomic_set(&ddb_entry->relogin_retry_count, 0);
- atomic_set(&ddb_entry->relogin_timer, 0);
- clear_bit(DF_RELOGIN, &ddb_entry->flags);
- iscsi_unblock_session(ddb_entry->sess);
- iscsi_session_event(ddb_entry->sess,
- ISCSI_KEVENT_CREATE_SESSION);
- /*
- * Change the lun state to READY in case the lun TIMEOUT before
- * the device came back.
- */
- } else if (ddb_entry->fw_ddb_device_state != DDB_DS_SESSION_ACTIVE) {
- /* Device went away, mark device missing */
- if (atomic_read(&ddb_entry->state) == DDB_STATE_ONLINE) {
- DEBUG2(ql4_printk(KERN_INFO, ha, "%s mark missing "
- "ddb_entry 0x%p sess 0x%p conn 0x%p\n",
- __func__, ddb_entry,
- ddb_entry->sess, ddb_entry->conn));
- qla4xxx_mark_device_missing(ha, ddb_entry);
- }
- /*
- * Relogin if device state changed to a not active state.
- * However, do not relogin if a RELOGIN is in process, or
- * we are not allowed to relogin to this DDB.
- */
- if (ddb_entry->fw_ddb_device_state == DDB_DS_SESSION_FAILED &&
- !test_bit(DF_RELOGIN, &ddb_entry->flags) &&
- qla4_is_relogin_allowed(ha, conn_err)) {
- /*
- * This triggers a relogin. After the relogin_timer
- * expires, the relogin gets scheduled. We must wait a
- * minimum amount of time since receiving an 0x8014 AEN
- * with failed device_state or a logout response before
- * we can issue another relogin.
- */
- /* Firmware pads this timeout: (time2wait +1).
- * Driver retry to login should be longer than F/W.
- * Otherwise F/W will fail
- * set_ddb() mbx cmd with 0x4005 since it still
- * counting down its time2wait.
- */
- atomic_set(&ddb_entry->relogin_timer, 0);
- atomic_set(&ddb_entry->retry_relogin_timer,
- ddb_entry->default_time2wait + 4);
- DEBUG(printk("scsi%ld: %s: ddb[%d] "
- "initiate relogin after %d seconds\n",
- ha->host_no, __func__,
- ddb_entry->fw_ddb_index,
- ddb_entry->default_time2wait + 4));
- } else {
- DEBUG(printk("scsi%ld: %s: ddb[%d] "
- "relogin not initiated, state = %d, "
- "ddb_entry->flags = 0x%lx\n",
- ha->host_no, __func__,
- ddb_entry->fw_ddb_index,
- ddb_entry->fw_ddb_device_state,
- ddb_entry->flags));
+ switch (old_fw_ddb_device_state) {
+ case DDB_DS_LOGIN_IN_PROCESS:
+ switch (state) {
+ case DDB_DS_SESSION_ACTIVE:
+ case DDB_DS_DISCOVERY:
+ iscsi_conn_login_event(ddb_entry->conn,
+ ISCSI_CONN_STATE_LOGGED_IN);
+ qla4xxx_update_session_conn_param(ha, ddb_entry);
+ status = QLA_SUCCESS;
+ break;
+ case DDB_DS_SESSION_FAILED:
+ case DDB_DS_NO_CONNECTION_ACTIVE:
+ iscsi_conn_login_event(ddb_entry->conn,
+ ISCSI_CONN_STATE_FREE);
+ status = QLA_SUCCESS;
+ break;
}
+ break;
+ case DDB_DS_SESSION_ACTIVE:
+ if (state == DDB_DS_SESSION_FAILED) {
+ /*
+ * iscsi_session failure will cause userspace to
+ * stop the connection which in turn would block the
+ * iscsi_session and start relogin
+ */
+ iscsi_session_failure(ddb_entry->sess->dd_data,
+ ISCSI_ERR_CONN_FAILED);
+ status = QLA_SUCCESS;
+ }
+ break;
+ default:
+ DEBUG2(ql4_printk(KERN_INFO, ha, "%s: Unknown Event\n",
+ __func__));
+ break;
}
- return QLA_SUCCESS;
+
+exit_ddb_event:
+ return status;
}