Merge tag 'microblaze-3.15-rc1' of git://git.monstr.eu/linux-2.6-microblaze
Pull Microblaze updates from Michal Simek:
- use asm-generic/io.h and fix intc/timer code
- clean platform handling
- enable some syscalls
* tag 'microblaze-3.15-rc1' of git://git.monstr.eu/linux-2.6-microblaze:
microblaze: Use asm-generic/io.h
microblaze: Remove platform folder
microblaze: Remove generic platform
microblaze: Sort Kconfig options
microblaze: Move DTS file to common location at boot/dts folder
microblaze: Fix compilation failure because of release_thread
microblaze: Fix sparse warning because of missing cpu.h header
microblaze: Make timer driver endian aware
microblaze: Make intc driver endian aware
microblaze: Wire-up new system calls sched_setattr/getattr
microblaze: Wire-up preadv/pwritev in syscall table
microblaze: Enable pselect6 syscall
microblaze: Drop architecture-specific declaration of early_printk
microblaze: Rename global function heartbeat()
diff --git a/arch/microblaze/Kconfig b/arch/microblaze/Kconfig
index 79b9bcd..9ae0854 100644
--- a/arch/microblaze/Kconfig
+++ b/arch/microblaze/Kconfig
@@ -1,38 +1,38 @@
config MICROBLAZE
def_bool y
select ARCH_MIGHT_HAVE_PC_PARPORT
- select HAVE_MEMBLOCK
- select HAVE_MEMBLOCK_NODE_MAP
- select HAVE_FUNCTION_TRACER
- select HAVE_FUNCTION_TRACE_MCOUNT_TEST
- select HAVE_FUNCTION_GRAPH_TRACER
- select HAVE_DYNAMIC_FTRACE
- select HAVE_FTRACE_MCOUNT_RECORD
- select ARCH_WANT_OPTIONAL_GPIOLIB
- select HAVE_OPROFILE
- select HAVE_ARCH_KGDB
- select HAVE_DMA_ATTRS
- select HAVE_DMA_API_DEBUG
- select TRACING_SUPPORT
- select OF
- select OF_EARLY_FLATTREE
select ARCH_WANT_IPC_PARSE_VERSION
- select HAVE_DEBUG_KMEMLEAK
- select IRQ_DOMAIN
- select VIRT_TO_BUS
+ select ARCH_WANT_OPTIONAL_GPIOLIB
+ select BUILDTIME_EXTABLE_SORT
+ select CLKSRC_OF
+ select CLONE_BACKWARDS3
+ select COMMON_CLK
+ select GENERIC_ATOMIC64
+ select GENERIC_CLOCKEVENTS
+ select GENERIC_CPU_DEVICES
+ select GENERIC_IDLE_POLL_SETUP
select GENERIC_IRQ_PROBE
select GENERIC_IRQ_SHOW
select GENERIC_PCI_IOMAP
- select GENERIC_CPU_DEVICES
- select GENERIC_ATOMIC64
- select GENERIC_CLOCKEVENTS
- select COMMON_CLK
select GENERIC_SCHED_CLOCK
- select GENERIC_IDLE_POLL_SETUP
+ select HAVE_ARCH_KGDB
+ select HAVE_DEBUG_KMEMLEAK
+ select HAVE_DMA_API_DEBUG
+ select HAVE_DMA_ATTRS
+ select HAVE_DYNAMIC_FTRACE
+ select HAVE_FTRACE_MCOUNT_RECORD
+ select HAVE_FUNCTION_GRAPH_TRACER
+ select HAVE_FUNCTION_TRACE_MCOUNT_TEST
+ select HAVE_FUNCTION_TRACER
+ select HAVE_MEMBLOCK
+ select HAVE_MEMBLOCK_NODE_MAP
+ select HAVE_OPROFILE
+ select IRQ_DOMAIN
select MODULES_USE_ELF_RELA
- select CLONE_BACKWARDS3
- select CLKSRC_OF
- select BUILDTIME_EXTABLE_SORT
+ select OF
+ select OF_EARLY_FLATTREE
+ select TRACING_SUPPORT
+ select VIRT_TO_BUS
config SWAP
def_bool n
@@ -74,7 +74,7 @@
source "kernel/Kconfig.freezer"
-source "arch/microblaze/platform/Kconfig.platform"
+source "arch/microblaze/Kconfig.platform"
menu "Processor type and features"
diff --git a/arch/microblaze/Kconfig.platform b/arch/microblaze/Kconfig.platform
new file mode 100644
index 0000000..1b3d8c8
--- /dev/null
+++ b/arch/microblaze/Kconfig.platform
@@ -0,0 +1,69 @@
+# For a description of the syntax of this configuration file,
+# see Documentation/kbuild/kconfig-language.txt.
+#
+# Platform selection Kconfig menu for MicroBlaze targets
+#
+
+menu "Platform options"
+
+config OPT_LIB_FUNCTION
+ bool "Optimalized lib function"
+ default y
+ help
+ Allows turn on optimalized library function (memcpy and memmove).
+ They are optimized by using word alignment. This will work
+ fine if both source and destination are aligned on the same
+ boundary. However, if they are aligned on different boundaries
+ shifts will be necessary. This might result in bad performance
+ on MicroBlaze systems without a barrel shifter.
+
+config OPT_LIB_ASM
+ bool "Optimalized lib function ASM"
+ depends on OPT_LIB_FUNCTION && (XILINX_MICROBLAZE0_USE_BARREL = 1)
+ default n
+ help
+ Allows turn on optimalized library function (memcpy and memmove).
+ Function are written in asm code.
+
+# Definitions for MICROBLAZE0
+comment "Definitions for MICROBLAZE0"
+
+config KERNEL_BASE_ADDR
+ hex "Physical address where Linux Kernel is"
+ default "0x90000000"
+ help
+ BASE Address for kernel
+
+config XILINX_MICROBLAZE0_FAMILY
+ string "Targeted FPGA family"
+ default "virtex5"
+
+config XILINX_MICROBLAZE0_USE_MSR_INSTR
+ int "USE_MSR_INSTR range (0:1)"
+ default 0
+
+config XILINX_MICROBLAZE0_USE_PCMP_INSTR
+ int "USE_PCMP_INSTR range (0:1)"
+ default 0
+
+config XILINX_MICROBLAZE0_USE_BARREL
+ int "USE_BARREL range (0:1)"
+ default 0
+
+config XILINX_MICROBLAZE0_USE_DIV
+ int "USE_DIV range (0:1)"
+ default 0
+
+config XILINX_MICROBLAZE0_USE_HW_MUL
+ int "USE_HW_MUL values (0=NONE, 1=MUL32, 2=MUL64)"
+ default 0
+
+config XILINX_MICROBLAZE0_USE_FPU
+ int "USE_FPU values (0=NONE, 1=BASIC, 2=EXTENDED)"
+ default 0
+
+config XILINX_MICROBLAZE0_HW_VER
+ string "Core version number"
+ default 7.10.d
+
+endmenu
diff --git a/arch/microblaze/Makefile b/arch/microblaze/Makefile
index a69eaf2..740f2b8 100644
--- a/arch/microblaze/Makefile
+++ b/arch/microblaze/Makefile
@@ -48,7 +48,6 @@
libs-y += arch/microblaze/lib/
core-y += arch/microblaze/kernel/
core-y += arch/microblaze/mm/
-core-y += arch/microblaze/platform/
core-$(CONFIG_PCI) += arch/microblaze/pci/
drivers-$(CONFIG_OPROFILE) += arch/microblaze/oprofile/
diff --git a/arch/microblaze/boot/dts/system.dts b/arch/microblaze/boot/dts/system.dts
deleted file mode 120000
index 7cb6578..0000000
--- a/arch/microblaze/boot/dts/system.dts
+++ /dev/null
@@ -1 +0,0 @@
-../../platform/generic/system.dts
\ No newline at end of file
diff --git a/arch/microblaze/platform/generic/system.dts b/arch/microblaze/boot/dts/system.dts
similarity index 100%
rename from arch/microblaze/platform/generic/system.dts
rename to arch/microblaze/boot/dts/system.dts
diff --git a/arch/microblaze/include/asm/io.h b/arch/microblaze/include/asm/io.h
index 3fbb7f1..1e4c332 100644
--- a/arch/microblaze/include/asm/io.h
+++ b/arch/microblaze/include/asm/io.h
@@ -15,7 +15,6 @@
#include <asm/page.h>
#include <linux/types.h>
#include <linux/mm.h> /* Get struct page {...} */
-#include <asm-generic/iomap.h>
#ifndef CONFIG_PCI
#define _IO_BASE 0
@@ -25,211 +24,32 @@
#define _IO_BASE isa_io_base
#define _ISA_MEM_BASE isa_mem_base
#define PCI_DRAM_OFFSET pci_dram_offset
-#endif
+struct pci_dev;
+extern void pci_iounmap(struct pci_dev *dev, void __iomem *);
+#define pci_iounmap pci_iounmap
extern unsigned long isa_io_base;
-extern unsigned long pci_io_base;
extern unsigned long pci_dram_offset;
-
extern resource_size_t isa_mem_base;
+#endif
+#define PCI_IOBASE ((void __iomem *)_IO_BASE)
#define IO_SPACE_LIMIT (0xFFFFFFFF)
-/* the following is needed to support PCI with some drivers */
-
-#define mmiowb()
-
-static inline unsigned char __raw_readb(const volatile void __iomem *addr)
-{
- return *(volatile unsigned char __force *)addr;
-}
-static inline unsigned short __raw_readw(const volatile void __iomem *addr)
-{
- return *(volatile unsigned short __force *)addr;
-}
-static inline unsigned int __raw_readl(const volatile void __iomem *addr)
-{
- return *(volatile unsigned int __force *)addr;
-}
-static inline unsigned long __raw_readq(const volatile void __iomem *addr)
-{
- return *(volatile unsigned long __force *)addr;
-}
-static inline void __raw_writeb(unsigned char v, volatile void __iomem *addr)
-{
- *(volatile unsigned char __force *)addr = v;
-}
-static inline void __raw_writew(unsigned short v, volatile void __iomem *addr)
-{
- *(volatile unsigned short __force *)addr = v;
-}
-static inline void __raw_writel(unsigned int v, volatile void __iomem *addr)
-{
- *(volatile unsigned int __force *)addr = v;
-}
-static inline void __raw_writeq(unsigned long v, volatile void __iomem *addr)
-{
- *(volatile unsigned long __force *)addr = v;
-}
-
-/*
- * read (readb, readw, readl, readq) and write (writeb, writew,
- * writel, writeq) accessors are for PCI and thus little endian.
- * Linux 2.4 for Microblaze had this wrong.
- */
-static inline unsigned char readb(const volatile void __iomem *addr)
-{
- return *(volatile unsigned char __force *)addr;
-}
-static inline unsigned short readw(const volatile void __iomem *addr)
-{
- return le16_to_cpu(*(volatile unsigned short __force *)addr);
-}
-static inline unsigned int readl(const volatile void __iomem *addr)
-{
- return le32_to_cpu(*(volatile unsigned int __force *)addr);
-}
-#define readq readq
-static inline u64 readq(const volatile void __iomem *addr)
-{
- return le64_to_cpu(__raw_readq(addr));
-}
-static inline void writeb(unsigned char v, volatile void __iomem *addr)
-{
- *(volatile unsigned char __force *)addr = v;
-}
-static inline void writew(unsigned short v, volatile void __iomem *addr)
-{
- *(volatile unsigned short __force *)addr = cpu_to_le16(v);
-}
-static inline void writel(unsigned int v, volatile void __iomem *addr)
-{
- *(volatile unsigned int __force *)addr = cpu_to_le32(v);
-}
-#define writeq(b, addr) __raw_writeq(cpu_to_le64(b), addr)
-
-/* ioread and iowrite variants. thease are for now same as __raw_
- * variants of accessors. we might check for endianess in the feature
- */
-#define ioread8(addr) __raw_readb((u8 *)(addr))
-#define ioread16(addr) __raw_readw((u16 *)(addr))
-#define ioread32(addr) __raw_readl((u32 *)(addr))
-#define iowrite8(v, addr) __raw_writeb((u8)(v), (u8 *)(addr))
-#define iowrite16(v, addr) __raw_writew((u16)(v), (u16 *)(addr))
-#define iowrite32(v, addr) __raw_writel((u32)(v), (u32 *)(addr))
-
-#define ioread16be(addr) __raw_readw((u16 *)(addr))
-#define ioread32be(addr) __raw_readl((u32 *)(addr))
-#define iowrite16be(v, addr) __raw_writew((u16)(v), (u16 *)(addr))
-#define iowrite32be(v, addr) __raw_writel((u32)(v), (u32 *)(addr))
-
-/* These are the definitions for the x86 IO instructions
- * inb/inw/inl/outb/outw/outl, the "string" versions
- * insb/insw/insl/outsb/outsw/outsl, and the "pausing" versions
- * inb_p/inw_p/...
- * The macros don't do byte-swapping.
- */
-#define inb(port) readb((u8 *)((unsigned long)(port)))
-#define outb(val, port) writeb((val), (u8 *)((unsigned long)(port)))
-#define inw(port) readw((u16 *)((unsigned long)(port)))
-#define outw(val, port) writew((val), (u16 *)((unsigned long)(port)))
-#define inl(port) readl((u32 *)((unsigned long)(port)))
-#define outl(val, port) writel((val), (u32 *)((unsigned long)(port)))
-
-#define inb_p(port) inb((port))
-#define outb_p(val, port) outb((val), (port))
-#define inw_p(port) inw((port))
-#define outw_p(val, port) outw((val), (port))
-#define inl_p(port) inl((port))
-#define outl_p(val, port) outl((val), (port))
-
-#define memset_io(a, b, c) memset((void *)(a), (b), (c))
-#define memcpy_fromio(a, b, c) memcpy((a), (void *)(b), (c))
-#define memcpy_toio(a, b, c) memcpy((void *)(a), (b), (c))
-
#ifdef CONFIG_MMU
-
-#define phys_to_virt(addr) ((void *)__phys_to_virt(addr))
-#define virt_to_phys(addr) ((unsigned long)__virt_to_phys(addr))
-#define virt_to_bus(addr) ((unsigned long)__virt_to_phys(addr))
-
#define page_to_bus(page) (page_to_phys(page))
-#define bus_to_virt(addr) (phys_to_virt(addr))
extern void iounmap(void __iomem *addr);
-/*extern void *__ioremap(phys_addr_t address, unsigned long size,
- unsigned long flags);*/
+
extern void __iomem *ioremap(phys_addr_t address, unsigned long size);
-#define ioremap_writethrough(addr, size) ioremap((addr), (size))
-#define ioremap_nocache(addr, size) ioremap((addr), (size))
-#define ioremap_fullcache(addr, size) ioremap((addr), (size))
-
-#else /* CONFIG_MMU */
-
-/**
- * virt_to_phys - map virtual addresses to physical
- * @address: address to remap
- *
- * The returned physical address is the physical (CPU) mapping for
- * the memory address given. It is only valid to use this function on
- * addresses directly mapped or allocated via kmalloc.
- *
- * This function does not give bus mappings for DMA transfers. In
- * almost all conceivable cases a device driver should not be using
- * this function
- */
-static inline unsigned long __iomem virt_to_phys(volatile void *address)
-{
- return __pa((unsigned long)address);
-}
-
-#define virt_to_bus virt_to_phys
-
-/**
- * phys_to_virt - map physical address to virtual
- * @address: address to remap
- *
- * The returned virtual address is a current CPU mapping for
- * the memory address given. It is only valid to use this function on
- * addresses that have a kernel mapping
- *
- * This function does not handle bus mappings for DMA transfers. In
- * almost all conceivable cases a device driver should not be using
- * this function
- */
-static inline void *phys_to_virt(unsigned long address)
-{
- return (void *)__va(address);
-}
-
-#define bus_to_virt(a) phys_to_virt(a)
-
-static inline void __iomem *__ioremap(phys_addr_t address, unsigned long size,
- unsigned long flags)
-{
- return (void *)address;
-}
-
-#define ioremap(physaddr, size) ((void __iomem *)(unsigned long)(physaddr))
-#define iounmap(addr) ((void)0)
-#define ioremap_nocache(physaddr, size) ioremap(physaddr, size)
+#define ioremap_writethrough(addr, size) ioremap((addr), (size))
+#define ioremap_nocache(addr, size) ioremap((addr), (size))
+#define ioremap_fullcache(addr, size) ioremap((addr), (size))
+#define ioremap_wc(addr, size) ioremap((addr), (size))
#endif /* CONFIG_MMU */
-/*
- * Convert a physical pointer to a virtual kernel pointer for /dev/mem
- * access
- */
-#define xlate_dev_mem_ptr(p) __va(p)
-
-/*
- * Convert a virtual cached pointer to an uncached pointer
- */
-#define xlate_dev_kmem_ptr(p) p
-
-/*
- * Big Endian
- */
+/* Big Endian */
#define out_be32(a, v) __raw_writel((v), (void __iomem __force *)(a))
#define out_be16(a, v) __raw_writew((v), (a))
@@ -239,10 +59,7 @@
#define writel_be(v, a) out_be32((__force unsigned *)a, v)
#define readl_be(a) in_be32((__force unsigned *)a)
-/*
- * Little endian
- */
-
+/* Little endian */
#define out_le32(a, v) __raw_writel(__cpu_to_le32(v), (a))
#define out_le16(a, v) __raw_writew(__cpu_to_le16(v), (a))
@@ -253,100 +70,7 @@
#define out_8(a, v) __raw_writeb((v), (a))
#define in_8(a) __raw_readb(a)
-#define mmiowb()
-
-#define ioport_map(port, nr) ((void __iomem *)(port))
-#define ioport_unmap(addr)
-
-/* from asm-generic/io.h */
-#ifndef insb
-static inline void insb(unsigned long addr, void *buffer, int count)
-{
- if (count) {
- u8 *buf = buffer;
- do {
- u8 x = inb(addr);
- *buf++ = x;
- } while (--count);
- }
-}
-#endif
-
-#ifndef insw
-static inline void insw(unsigned long addr, void *buffer, int count)
-{
- if (count) {
- u16 *buf = buffer;
- do {
- u16 x = inw(addr);
- *buf++ = x;
- } while (--count);
- }
-}
-#endif
-
-#ifndef insl
-static inline void insl(unsigned long addr, void *buffer, int count)
-{
- if (count) {
- u32 *buf = buffer;
- do {
- u32 x = inl(addr);
- *buf++ = x;
- } while (--count);
- }
-}
-#endif
-
-#ifndef outsb
-static inline void outsb(unsigned long addr, const void *buffer, int count)
-{
- if (count) {
- const u8 *buf = buffer;
- do {
- outb(*buf++, addr);
- } while (--count);
- }
-}
-#endif
-
-#ifndef outsw
-static inline void outsw(unsigned long addr, const void *buffer, int count)
-{
- if (count) {
- const u16 *buf = buffer;
- do {
- outw(*buf++, addr);
- } while (--count);
- }
-}
-#endif
-
-#ifndef outsl
-static inline void outsl(unsigned long addr, const void *buffer, int count)
-{
- if (count) {
- const u32 *buf = buffer;
- do {
- outl(*buf++, addr);
- } while (--count);
- }
-}
-#endif
-
-#define ioread8_rep(p, dst, count) \
- insb((unsigned long) (p), (dst), (count))
-#define ioread16_rep(p, dst, count) \
- insw((unsigned long) (p), (dst), (count))
-#define ioread32_rep(p, dst, count) \
- insl((unsigned long) (p), (dst), (count))
-
-#define iowrite8_rep(p, src, count) \
- outsb((unsigned long) (p), (src), (count))
-#define iowrite16_rep(p, src, count) \
- outsw((unsigned long) (p), (src), (count))
-#define iowrite32_rep(p, src, count) \
- outsl((unsigned long) (p), (src), (count))
+#include <asm-generic/io.h>
#define readb_relaxed readb
#define readw_relaxed readw
diff --git a/arch/microblaze/include/asm/processor.h b/arch/microblaze/include/asm/processor.h
index d6e0ffe..9d31b05 100644
--- a/arch/microblaze/include/asm/processor.h
+++ b/arch/microblaze/include/asm/processor.h
@@ -122,7 +122,7 @@
}
/* Free all resources held by a thread. */
-extern inline void release_thread(struct task_struct *dead_task)
+static inline void release_thread(struct task_struct *dead_task)
{
}
diff --git a/arch/microblaze/include/asm/setup.h b/arch/microblaze/include/asm/setup.h
index f05df56..be84a4d 100644
--- a/arch/microblaze/include/asm/setup.h
+++ b/arch/microblaze/include/asm/setup.h
@@ -19,14 +19,12 @@
extern char *klimit;
-void early_printk(const char *fmt, ...);
-
int setup_early_printk(char *opt);
void remap_early_printk(void);
void disable_early_printk(void);
-void heartbeat(void);
-void setup_heartbeat(void);
+void microblaze_heartbeat(void);
+void microblaze_setup_heartbeat(void);
# ifdef CONFIG_MMU
extern void mmu_reset(void);
diff --git a/arch/microblaze/include/uapi/asm/unistd.h b/arch/microblaze/include/uapi/asm/unistd.h
index 20043b6..8d0791b 100644
--- a/arch/microblaze/include/uapi/asm/unistd.h
+++ b/arch/microblaze/include/uapi/asm/unistd.h
@@ -93,7 +93,7 @@
#define __NR_settimeofday 79 /* ok */
#define __NR_getgroups 80 /* ok */
#define __NR_setgroups 81 /* ok */
-#define __NR_select 82 /* obsolete -> sys_pselect7 */
+#define __NR_select 82 /* obsolete -> sys_pselect6 */
#define __NR_symlink 83 /* symlinkat */
#define __NR_oldlstat 84 /* remove */
#define __NR_readlink 85 /* obsolete -> sys_readlinkat */
@@ -320,7 +320,7 @@
#define __NR_readlinkat 305 /* ok */
#define __NR_fchmodat 306 /* ok */
#define __NR_faccessat 307 /* ok */
-#define __NR_pselect6 308 /* obsolete -> sys_pselect7 */
+#define __NR_pselect6 308 /* ok */
#define __NR_ppoll 309 /* ok */
#define __NR_unshare 310 /* ok */
#define __NR_set_robust_list 311 /* ok */
@@ -396,5 +396,7 @@
#define __NR_process_vm_writev 378
#define __NR_kcmp 379
#define __NR_finit_module 380
+#define __NR_sched_setattr 381
+#define __NR_sched_getattr 382
#endif /* _UAPI_ASM_MICROBLAZE_UNISTD_H */
diff --git a/arch/microblaze/kernel/Makefile b/arch/microblaze/kernel/Makefile
index 5b0e512..08d50cc 100644
--- a/arch/microblaze/kernel/Makefile
+++ b/arch/microblaze/kernel/Makefile
@@ -16,7 +16,7 @@
obj-y += dma.o exceptions.o \
hw_exception_handler.o intc.o irq.o \
- process.o prom.o prom_parse.o ptrace.o \
+ platform.o process.o prom.o prom_parse.o ptrace.o \
reset.o setup.o signal.o sys_microblaze.o timer.o traps.o unwind.o
obj-y += cpu/
diff --git a/arch/microblaze/kernel/heartbeat.c b/arch/microblaze/kernel/heartbeat.c
index 1879a05..4643e3a 100644
--- a/arch/microblaze/kernel/heartbeat.c
+++ b/arch/microblaze/kernel/heartbeat.c
@@ -17,7 +17,7 @@
static unsigned int base_addr;
-void heartbeat(void)
+void microblaze_heartbeat(void)
{
static unsigned int cnt, period, dist;
@@ -42,7 +42,7 @@
}
}
-void setup_heartbeat(void)
+void microblaze_setup_heartbeat(void)
{
struct device_node *gpio = NULL;
int *prop;
diff --git a/arch/microblaze/kernel/intc.c b/arch/microblaze/kernel/intc.c
index 581451a..15c7c12 100644
--- a/arch/microblaze/kernel/intc.c
+++ b/arch/microblaze/kernel/intc.c
@@ -32,6 +32,29 @@
#define MER_ME (1<<0)
#define MER_HIE (1<<1)
+static unsigned int (*read_fn)(void __iomem *);
+static void (*write_fn)(u32, void __iomem *);
+
+static void intc_write32(u32 val, void __iomem *addr)
+{
+ iowrite32(val, addr);
+}
+
+static unsigned int intc_read32(void __iomem *addr)
+{
+ return ioread32(addr);
+}
+
+static void intc_write32_be(u32 val, void __iomem *addr)
+{
+ iowrite32be(val, addr);
+}
+
+static unsigned int intc_read32_be(void __iomem *addr)
+{
+ return ioread32be(addr);
+}
+
static void intc_enable_or_unmask(struct irq_data *d)
{
unsigned long mask = 1 << d->hwirq;
@@ -43,21 +66,21 @@
* acks the irq before calling the interrupt handler
*/
if (irqd_is_level_type(d))
- out_be32(intc_baseaddr + IAR, mask);
+ write_fn(mask, intc_baseaddr + IAR);
- out_be32(intc_baseaddr + SIE, mask);
+ write_fn(mask, intc_baseaddr + SIE);
}
static void intc_disable_or_mask(struct irq_data *d)
{
pr_debug("disable: %ld\n", d->hwirq);
- out_be32(intc_baseaddr + CIE, 1 << d->hwirq);
+ write_fn(1 << d->hwirq, intc_baseaddr + CIE);
}
static void intc_ack(struct irq_data *d)
{
pr_debug("ack: %ld\n", d->hwirq);
- out_be32(intc_baseaddr + IAR, 1 << d->hwirq);
+ write_fn(1 << d->hwirq, intc_baseaddr + IAR);
}
static void intc_mask_ack(struct irq_data *d)
@@ -65,8 +88,8 @@
unsigned long mask = 1 << d->hwirq;
pr_debug("disable_and_ack: %ld\n", d->hwirq);
- out_be32(intc_baseaddr + CIE, mask);
- out_be32(intc_baseaddr + IAR, mask);
+ write_fn(mask, intc_baseaddr + CIE);
+ write_fn(mask, intc_baseaddr + IAR);
}
static struct irq_chip intc_dev = {
@@ -83,7 +106,7 @@
{
unsigned int hwirq, irq = -1;
- hwirq = in_be32(intc_baseaddr + IVR);
+ hwirq = read_fn(intc_baseaddr + IVR);
if (hwirq != -1U)
irq = irq_find_mapping(root_domain, hwirq);
@@ -140,17 +163,25 @@
pr_info("%s: num_irq=%d, edge=0x%x\n",
intc->full_name, nr_irq, intr_mask);
+ write_fn = intc_write32;
+ read_fn = intc_read32;
+
/*
* Disable all external interrupts until they are
* explicity requested.
*/
- out_be32(intc_baseaddr + IER, 0);
+ write_fn(0, intc_baseaddr + IER);
/* Acknowledge any pending interrupts just in case. */
- out_be32(intc_baseaddr + IAR, 0xffffffff);
+ write_fn(0xffffffff, intc_baseaddr + IAR);
/* Turn on the Master Enable. */
- out_be32(intc_baseaddr + MER, MER_HIE | MER_ME);
+ write_fn(MER_HIE | MER_ME, intc_baseaddr + MER);
+ if (!(read_fn(intc_baseaddr + MER) & (MER_HIE | MER_ME))) {
+ write_fn = intc_write32_be;
+ read_fn = intc_read32_be;
+ write_fn(MER_HIE | MER_ME, intc_baseaddr + MER);
+ }
/* Yeah, okay, casting the intr_mask to a void* is butt-ugly, but I'm
* lazy and Michal can clean it up to something nicer when he tests
diff --git a/arch/microblaze/platform/platform.c b/arch/microblaze/kernel/platform.c
similarity index 100%
rename from arch/microblaze/platform/platform.c
rename to arch/microblaze/kernel/platform.c
diff --git a/arch/microblaze/kernel/process.c b/arch/microblaze/kernel/process.c
index 7d1a9c8..b2dd3719 100644
--- a/arch/microblaze/kernel/process.c
+++ b/arch/microblaze/kernel/process.c
@@ -8,6 +8,7 @@
* for more details.
*/
+#include <linux/cpu.h>
#include <linux/export.h>
#include <linux/sched.h>
#include <linux/pm.h>
diff --git a/arch/microblaze/kernel/signal.c b/arch/microblaze/kernel/signal.c
index d26d7e7..49a07a4 100644
--- a/arch/microblaze/kernel/signal.c
+++ b/arch/microblaze/kernel/signal.c
@@ -216,7 +216,7 @@
/* MS: I need add offset in page */
address += ((unsigned long)frame->tramp) & ~PAGE_MASK;
/* MS address is virtual */
- address = virt_to_phys(address);
+ address = __virt_to_phys(address);
invalidate_icache_range(address, address + 8);
flush_dcache_range(address, address + 8);
}
diff --git a/arch/microblaze/kernel/syscall_table.S b/arch/microblaze/kernel/syscall_table.S
index b882ad5..329dfba 100644
--- a/arch/microblaze/kernel/syscall_table.S
+++ b/arch/microblaze/kernel/syscall_table.S
@@ -308,7 +308,7 @@
.long sys_readlinkat /* 305 */
.long sys_fchmodat
.long sys_faccessat
- .long sys_ni_syscall /* pselect6 */
+ .long sys_pselect6
.long sys_ppoll
.long sys_unshare /* 310 */
.long sys_set_robust_list
@@ -363,8 +363,8 @@
.long sys_sendmsg /* 360 */
.long sys_recvmsg
.long sys_accept4
- .long sys_ni_syscall
- .long sys_ni_syscall
+ .long sys_preadv
+ .long sys_pwritev
.long sys_rt_tgsigqueueinfo /* 365 */
.long sys_perf_event_open
.long sys_recvmmsg
@@ -381,3 +381,5 @@
.long sys_process_vm_writev
.long sys_kcmp
.long sys_finit_module
+ .long sys_sched_setattr
+ .long sys_sched_getattr
diff --git a/arch/microblaze/kernel/timer.c b/arch/microblaze/kernel/timer.c
index fb0c6144..dd96f0e 100644
--- a/arch/microblaze/kernel/timer.c
+++ b/arch/microblaze/kernel/timer.c
@@ -43,10 +43,33 @@
#define TCSR_PWMA (1<<9)
#define TCSR_ENALL (1<<10)
+static unsigned int (*read_fn)(void __iomem *);
+static void (*write_fn)(u32, void __iomem *);
+
+static void timer_write32(u32 val, void __iomem *addr)
+{
+ iowrite32(val, addr);
+}
+
+static unsigned int timer_read32(void __iomem *addr)
+{
+ return ioread32(addr);
+}
+
+static void timer_write32_be(u32 val, void __iomem *addr)
+{
+ iowrite32be(val, addr);
+}
+
+static unsigned int timer_read32_be(void __iomem *addr)
+{
+ return ioread32be(addr);
+}
+
static inline void xilinx_timer0_stop(void)
{
- out_be32(timer_baseaddr + TCSR0,
- in_be32(timer_baseaddr + TCSR0) & ~TCSR_ENT);
+ write_fn(read_fn(timer_baseaddr + TCSR0) & ~TCSR_ENT,
+ timer_baseaddr + TCSR0);
}
static inline void xilinx_timer0_start_periodic(unsigned long load_val)
@@ -54,10 +77,10 @@
if (!load_val)
load_val = 1;
/* loading value to timer reg */
- out_be32(timer_baseaddr + TLR0, load_val);
+ write_fn(load_val, timer_baseaddr + TLR0);
/* load the initial value */
- out_be32(timer_baseaddr + TCSR0, TCSR_LOAD);
+ write_fn(TCSR_LOAD, timer_baseaddr + TCSR0);
/* see timer data sheet for detail
* !ENALL - don't enable 'em all
@@ -72,8 +95,8 @@
* UDT - set the timer as down counter
* !MDT0 - generate mode
*/
- out_be32(timer_baseaddr + TCSR0,
- TCSR_TINT|TCSR_ENIT|TCSR_ENT|TCSR_ARHT|TCSR_UDT);
+ write_fn(TCSR_TINT|TCSR_ENIT|TCSR_ENT|TCSR_ARHT|TCSR_UDT,
+ timer_baseaddr + TCSR0);
}
static inline void xilinx_timer0_start_oneshot(unsigned long load_val)
@@ -81,13 +104,13 @@
if (!load_val)
load_val = 1;
/* loading value to timer reg */
- out_be32(timer_baseaddr + TLR0, load_val);
+ write_fn(load_val, timer_baseaddr + TLR0);
/* load the initial value */
- out_be32(timer_baseaddr + TCSR0, TCSR_LOAD);
+ write_fn(TCSR_LOAD, timer_baseaddr + TCSR0);
- out_be32(timer_baseaddr + TCSR0,
- TCSR_TINT|TCSR_ENIT|TCSR_ENT|TCSR_ARHT|TCSR_UDT);
+ write_fn(TCSR_TINT|TCSR_ENIT|TCSR_ENT|TCSR_ARHT|TCSR_UDT,
+ timer_baseaddr + TCSR0);
}
static int xilinx_timer_set_next_event(unsigned long delta,
@@ -133,14 +156,14 @@
static inline void timer_ack(void)
{
- out_be32(timer_baseaddr + TCSR0, in_be32(timer_baseaddr + TCSR0));
+ write_fn(read_fn(timer_baseaddr + TCSR0), timer_baseaddr + TCSR0);
}
static irqreturn_t timer_interrupt(int irq, void *dev_id)
{
struct clock_event_device *evt = &clockevent_xilinx_timer;
#ifdef CONFIG_HEART_BEAT
- heartbeat();
+ microblaze_heartbeat();
#endif
timer_ack();
evt->event_handler(evt);
@@ -169,7 +192,7 @@
static u64 xilinx_clock_read(void)
{
- return in_be32(timer_baseaddr + TCR1);
+ return read_fn(timer_baseaddr + TCR1);
}
static cycle_t xilinx_read(struct clocksource *cs)
@@ -217,10 +240,10 @@
panic("failed to register clocksource");
/* stop timer1 */
- out_be32(timer_baseaddr + TCSR1,
- in_be32(timer_baseaddr + TCSR1) & ~TCSR_ENT);
+ write_fn(read_fn(timer_baseaddr + TCSR1) & ~TCSR_ENT,
+ timer_baseaddr + TCSR1);
/* start timer1 - up counting without interrupt */
- out_be32(timer_baseaddr + TCSR1, TCSR_TINT|TCSR_ENT|TCSR_ARHT);
+ write_fn(TCSR_TINT|TCSR_ENT|TCSR_ARHT, timer_baseaddr + TCSR1);
/* register timecounter - for ftrace support */
init_xilinx_timecounter();
@@ -245,6 +268,15 @@
BUG();
}
+ write_fn = timer_write32;
+ read_fn = timer_read32;
+
+ write_fn(TCSR_MDT, timer_baseaddr + TCSR0);
+ if (!(read_fn(timer_baseaddr + TCSR0) & TCSR_MDT)) {
+ write_fn = timer_write32_be;
+ read_fn = timer_read32_be;
+ }
+
irq = irq_of_parse_and_map(timer, 0);
of_property_read_u32(timer, "xlnx,one-timer-only", &timer_num);
@@ -274,7 +306,7 @@
setup_irq(irq, &timer_irqaction);
#ifdef CONFIG_HEART_BEAT
- setup_heartbeat();
+ microblaze_setup_heartbeat();
#endif
xilinx_clocksource_init();
xilinx_clockevent_init();
diff --git a/arch/microblaze/mm/consistent.c b/arch/microblaze/mm/consistent.c
index dbbf224..e10ad93 100644
--- a/arch/microblaze/mm/consistent.c
+++ b/arch/microblaze/mm/consistent.c
@@ -117,7 +117,7 @@
ret = (void *)va;
/* This gives us the real physical address of the first page. */
- *dma_handle = pa = virt_to_bus((void *)vaddr);
+ *dma_handle = pa = __virt_to_phys(vaddr);
#endif
/*
diff --git a/arch/microblaze/mm/init.c b/arch/microblaze/mm/init.c
index 89077d3..77bc7c7 100644
--- a/arch/microblaze/mm/init.c
+++ b/arch/microblaze/mm/init.c
@@ -369,7 +369,7 @@
if (initrd_start) {
unsigned long size;
size = initrd_end - initrd_start;
- memblock_reserve(virt_to_phys(initrd_start), size);
+ memblock_reserve(__virt_to_phys(initrd_start), size);
}
#endif /* CONFIG_BLK_DEV_INITRD */
diff --git a/arch/microblaze/mm/pgtable.c b/arch/microblaze/mm/pgtable.c
index 10b3bd0..4f4520e 100644
--- a/arch/microblaze/mm/pgtable.c
+++ b/arch/microblaze/mm/pgtable.c
@@ -69,10 +69,11 @@
*
* However, allow remap of rootfs: TBD
*/
+
if (mem_init_done &&
p >= memory_start && p < virt_to_phys(high_memory) &&
- !(p >= virt_to_phys((unsigned long)&__bss_stop) &&
- p < virt_to_phys((unsigned long)__bss_stop))) {
+ !(p >= __virt_to_phys((phys_addr_t)__bss_stop) &&
+ p < __virt_to_phys((phys_addr_t)__bss_stop))) {
pr_warn("__ioremap(): phys addr "PTE_FMT" is RAM lr %pf\n",
(unsigned long)p, __builtin_return_address(0));
return NULL;
diff --git a/arch/microblaze/platform/Kconfig.platform b/arch/microblaze/platform/Kconfig.platform
deleted file mode 100644
index db1aa5c..0000000
--- a/arch/microblaze/platform/Kconfig.platform
+++ /dev/null
@@ -1,44 +0,0 @@
-# For a description of the syntax of this configuration file,
-# see Documentation/kbuild/kconfig-language.txt.
-#
-# Platform selection Kconfig menu for MicroBlaze targets
-#
-
-menu "Platform options"
-choice
- prompt "Platform"
- default PLATFORM_MICROBLAZE_AUTO
- help
- Choose which hardware board/platform you are targeting.
-
-config PLATFORM_GENERIC
- bool "Generic"
- help
- Choose this option for the Generic platform.
-
-endchoice
-
-config OPT_LIB_FUNCTION
- bool "Optimalized lib function"
- default y
- help
- Allows turn on optimalized library function (memcpy and memmove).
- They are optimized by using word alignment. This will work
- fine if both source and destination are aligned on the same
- boundary. However, if they are aligned on different boundaries
- shifts will be necessary. This might result in bad performance
- on MicroBlaze systems without a barrel shifter.
-
-config OPT_LIB_ASM
- bool "Optimalized lib function ASM"
- depends on OPT_LIB_FUNCTION && (XILINX_MICROBLAZE0_USE_BARREL = 1)
- default n
- help
- Allows turn on optimalized library function (memcpy and memmove).
- Function are written in asm code.
-
-if PLATFORM_GENERIC=y
- source "arch/microblaze/platform/generic/Kconfig.auto"
-endif
-
-endmenu
diff --git a/arch/microblaze/platform/Makefile b/arch/microblaze/platform/Makefile
deleted file mode 100644
index ea1b75cc..0000000
--- a/arch/microblaze/platform/Makefile
+++ /dev/null
@@ -1,6 +0,0 @@
-#
-# Makefile for arch/microblaze/platform directory
-#
-#obj-$(CONFIG_PLATFORM_GENERIC) += generic/
-
-obj-y += platform.o
diff --git a/arch/microblaze/platform/generic/Kconfig.auto b/arch/microblaze/platform/generic/Kconfig.auto
deleted file mode 100644
index 25a6f01..0000000
--- a/arch/microblaze/platform/generic/Kconfig.auto
+++ /dev/null
@@ -1,61 +0,0 @@
-#
-# (C) Copyright 2007 Michal Simek
-#
-# Michal SIMEK <monstr@monstr.eu>
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-# Definitions for MICROBLAZE0
-comment "Definitions for MICROBLAZE0"
-
-config KERNEL_BASE_ADDR
- hex "Physical address where Linux Kernel is"
- default "0x90000000"
- help
- BASE Address for kernel
-
-config XILINX_MICROBLAZE0_FAMILY
- string "Targeted FPGA family"
- default "virtex5"
-
-config XILINX_MICROBLAZE0_USE_MSR_INSTR
- int "USE_MSR_INSTR range (0:1)"
- default 0
-
-config XILINX_MICROBLAZE0_USE_PCMP_INSTR
- int "USE_PCMP_INSTR range (0:1)"
- default 0
-
-config XILINX_MICROBLAZE0_USE_BARREL
- int "USE_BARREL range (0:1)"
- default 0
-
-config XILINX_MICROBLAZE0_USE_DIV
- int "USE_DIV range (0:1)"
- default 0
-
-config XILINX_MICROBLAZE0_USE_HW_MUL
- int "USE_HW_MUL values (0=NONE, 1=MUL32, 2=MUL64)"
- default 0
-
-config XILINX_MICROBLAZE0_USE_FPU
- int "USE_FPU values (0=NONE, 1=BASIC, 2=EXTENDED)"
- default 0
-
-config XILINX_MICROBLAZE0_HW_VER
- string "Core version number"
- default 7.10.d
diff --git a/arch/microblaze/platform/generic/Makefile b/arch/microblaze/platform/generic/Makefile
deleted file mode 100644
index 9a8b1bd..0000000
--- a/arch/microblaze/platform/generic/Makefile
+++ /dev/null
@@ -1,3 +0,0 @@
-#
-# Empty Makefile to keep make clean happy
-#