Merge tag 'soc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC platform changes from Olof Johansson:
"This branch contains mostly additions and changes to platform
enablement and SoC-level drivers. Since there's sometimes a
dependency on device-tree changes, there's also a fair amount of
those in this branch.
Pieces worth mentioning are:
- Mbus driver for Marvell platforms, allowing kernel configuration
and resource allocation of on-chip peripherals.
- Enablement of the mbus infrastructure from Marvell PCI-e drivers.
- Preparation of MSI support for Marvell platforms.
- Addition of new PCI-e host controller driver for Tegra platforms
- Some churn caused by sharing of macro names between i.MX 6Q and 6DL
platforms in the device tree sources and header files.
- Various suspend/PM updates for Tegra, including LP1 support.
- Versatile Express support for MCPM, part of big little support.
- Allwinner platform support for A20 and A31 SoCs (dual and quad
Cortex-A7)
- OMAP2+ support for DRA7, a new Cortex-A15-based SoC.
The code that touches other architectures are patches moving MSI
arch-specific functions over to weak symbols and removal of
ARCH_SUPPORTS_MSI, acked by PCI maintainers"
* tag 'soc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (266 commits)
tegra-cpuidle: provide stub when !CONFIG_CPU_IDLE
PCI: tegra: replace devm_request_and_ioremap by devm_ioremap_resource
ARM: tegra: Drop ARCH_SUPPORTS_MSI and sort list
ARM: dts: vf610-twr: enable i2c0 device
ARM: dts: i.MX51: Add one more I2C2 pinmux entry
ARM: dts: i.MX51: Move pins configuration under "iomuxc" label
ARM: dtsi: imx6qdl-sabresd: Add USB OTG vbus pin to pinctrl_hog
ARM: dtsi: imx6qdl-sabresd: Add USB host 1 VBUS regulator
ARM: dts: imx27-phytec-phycore-som: Enable AUDMUX
ARM: dts: i.MX27: Disable AUDMUX in the template
ARM: dts: wandboard: Add support for SDIO bcm4329
ARM: i.MX5 clocks: Remove optional clock setup (CKIH1) from i.MX51 template
ARM: dts: imx53-qsb: Make USBH1 functional
ARM i.MX6Q: dts: Enable I2C1 with EEPROM and PMIC on Phytec phyFLEX-i.MX6 Ouad module
ARM i.MX6Q: dts: Enable SPI NOR flash on Phytec phyFLEX-i.MX6 Ouad module
ARM: dts: imx6qdl-sabresd: Add touchscreen support
ARM: imx: add ocram clock for imx53
ARM: dts: imx: ocram size is different between imx6q and imx6dl
ARM: dts: imx27-phytec-phycore-som: Fix regulator settings
ARM: dts: i.MX27: Remove clock name from CPU node
...
diff --git a/Documentation/devicetree/bindings/arm/omap/omap.txt b/Documentation/devicetree/bindings/arm/omap/omap.txt
index 6d498c7..91b7049 100644
--- a/Documentation/devicetree/bindings/arm/omap/omap.txt
+++ b/Documentation/devicetree/bindings/arm/omap/omap.txt
@@ -59,3 +59,6 @@
- AM43x EPOS EVM
compatible = "ti,am43x-epos-evm", "ti,am4372", "ti,am43"
+
+- DRA7 EVM: Software Developement Board for DRA7XX
+ compatible = "ti,dra7-evm", "ti,dra7"
diff --git a/Documentation/devicetree/bindings/arm/vexpress-scc.txt b/Documentation/devicetree/bindings/arm/vexpress-scc.txt
new file mode 100644
index 0000000..ae5043e4
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/vexpress-scc.txt
@@ -0,0 +1,33 @@
+ARM Versatile Express Serial Configuration Controller
+-----------------------------------------------------
+
+Test chips for ARM Versatile Express platform implement SCC (Serial
+Configuration Controller) interface, used to set initial conditions
+for the test chip.
+
+In some cases its registers are also mapped in normal address space
+and can be used to obtain runtime information about the chip internals
+(like silicon temperature sensors) and as interface to other subsystems
+like platform configuration control and power management.
+
+Required properties:
+
+- compatible value: "arm,vexpress-scc,<model>", "arm,vexpress-scc";
+ where <model> is the full tile model name (as used
+ in the tile's Technical Reference Manual),
+ eg. for Coretile Express A15x2 A7x3 (V2P-CA15_A7):
+ compatible = "arm,vexpress-scc,v2p-ca15_a7", "arm,vexpress-scc";
+
+Optional properties:
+
+- reg: when the SCC is memory mapped, physical address and size of the
+ registers window
+- interrupts: when the SCC can generate a system-level interrupt
+
+Example:
+
+ scc@7fff0000 {
+ compatible = "arm,vexpress-scc,v2p-ca15_a7", "arm,vexpress-scc";
+ reg = <0 0x7fff0000 0 0x1000>;
+ interrupts = <0 95 4>;
+ };
diff --git a/Documentation/devicetree/bindings/bus/imx-weim.txt b/Documentation/devicetree/bindings/bus/imx-weim.txt
index cedc2a9..0fd76c4 100644
--- a/Documentation/devicetree/bindings/bus/imx-weim.txt
+++ b/Documentation/devicetree/bindings/bus/imx-weim.txt
@@ -8,7 +8,7 @@
Required properties:
- - compatible: Should be set to "fsl,imx6q-weim"
+ - compatible: Should be set to "fsl,<soc>-weim"
- reg: A resource specifier for the register space
(see the example below)
- clocks: the clock, see the example below.
@@ -21,11 +21,18 @@
Timing property for child nodes. It is mandatory, not optional.
- - fsl,weim-cs-timing: The timing array, contains 6 timing values for the
+ - fsl,weim-cs-timing: The timing array, contains timing values for the
child node. We can get the CS index from the child
- node's "reg" property. This property contains the values
- for the registers EIM_CSnGCR1, EIM_CSnGCR2, EIM_CSnRCR1,
- EIM_CSnRCR2, EIM_CSnWCR1, EIM_CSnWCR2 in this order.
+ node's "reg" property. The number of registers depends
+ on the selected chip.
+ For i.MX1, i.MX21 ("fsl,imx1-weim") there are two
+ registers: CSxU, CSxL.
+ For i.MX25, i.MX27, i.MX31 and i.MX35 ("fsl,imx27-weim")
+ there are three registers: CSCRxU, CSCRxL, CSCRxA.
+ For i.MX50, i.MX53 ("fsl,imx50-weim"),
+ i.MX51 ("fsl,imx51-weim") and i.MX6Q ("fsl,imx6q-weim")
+ there are six registers: CSxGCR1, CSxGCR2, CSxRCR1,
+ CSxRCR2, CSxWCR1, CSxWCR2.
Example for an imx6q-sabreauto board, the NOR flash connected to the WEIM:
diff --git a/Documentation/devicetree/bindings/bus/mvebu-mbus.txt b/Documentation/devicetree/bindings/bus/mvebu-mbus.txt
new file mode 100644
index 0000000..7586fb6
--- /dev/null
+++ b/Documentation/devicetree/bindings/bus/mvebu-mbus.txt
@@ -0,0 +1,276 @@
+
+* Marvell MBus
+
+Required properties:
+
+- compatible: Should be set to one of the following:
+ marvell,armada370-mbus
+ marvell,armadaxp-mbus
+ marvell,armada370-mbus
+ marvell,armadaxp-mbus
+ marvell,kirkwood-mbus
+ marvell,dove-mbus
+ marvell,orion5x-88f5281-mbus
+ marvell,orion5x-88f5182-mbus
+ marvell,orion5x-88f5181-mbus
+ marvell,orion5x-88f6183-mbus
+ marvell,mv78xx0-mbus
+
+- address-cells: Must be '2'. The first cell for the MBus ID encoding,
+ the second cell for the address offset within the window.
+
+- size-cells: Must be '1'.
+
+- ranges: Must be set up to provide a proper translation for each child.
+ See the examples below.
+
+- controller: Contains a single phandle referring to the MBus controller
+ node. This allows to specify the node that contains the
+ registers that control the MBus, which is typically contained
+ within the internal register window (see below).
+
+Optional properties:
+
+- pcie-mem-aperture: This optional property contains the aperture for
+ the memory region of the PCIe driver.
+ If it's defined, it must encode the base address and
+ size for the address decoding windows allocated for
+ the PCIe memory region.
+
+- pcie-io-aperture: Just as explained for the above property, this
+ optional property contains the aperture for the
+ I/O region of the PCIe driver.
+
+* Marvell MBus controller
+
+Required properties:
+
+- compatible: Should be set to "marvell,mbus-controller".
+
+- reg: Device's register space.
+ Two entries are expected (see the examples below):
+ the first one controls the devices decoding window and
+ the second one controls the SDRAM decoding window.
+
+Example:
+
+ soc {
+ compatible = "marvell,armada370-mbus", "simple-bus";
+ #address-cells = <2>;
+ #size-cells = <1>;
+ controller = <&mbusc>;
+ pcie-mem-aperture = <0xe0000000 0x8000000>;
+ pcie-io-aperture = <0xe8000000 0x100000>;
+
+ internal-regs {
+ compatible = "simple-bus";
+
+ mbusc: mbus-controller@20000 {
+ compatible = "marvell,mbus-controller";
+ reg = <0x20000 0x100>, <0x20180 0x20>;
+ };
+
+ /* more children ...*/
+ };
+ };
+
+** MBus address decoding window specification
+
+The MBus children address space is comprised of two cells: the first one for
+the window ID and the second one for the offset within the window.
+In order to allow to describe valid and non-valid window entries, the
+following encoding is used:
+
+ 0xSIAA0000 0x00oooooo
+
+Where:
+
+ S = 0x0 for a MBus valid window
+ S = 0xf for a non-valid window (see below)
+
+If S = 0x0, then:
+
+ I = 4-bit window target ID
+ AA = windpw attribute
+
+If S = 0xf, then:
+
+ I = don't care
+ AA = 1 for internal register
+
+Following the above encoding, for each ranges entry for a MBus valid window
+(S = 0x0), an address decoding window is allocated. On the other side,
+entries for translation that do not correspond to valid windows (S = 0xf)
+are skipped.
+
+ soc {
+ compatible = "marvell,armada370-mbus", "simple-bus";
+ #address-cells = <2>;
+ #size-cells = <1>;
+ controller = <&mbusc>;
+
+ ranges = <0xf0010000 0 0 0xd0000000 0x100000
+ 0x01e00000 0 0 0xfff00000 0x100000>;
+
+ bootrom {
+ compatible = "marvell,bootrom";
+ reg = <0x01e00000 0 0x100000>;
+ };
+
+ /* other children */
+ ...
+
+ internal-regs {
+ compatible = "simple-bus";
+ ranges = <0 0xf0010000 0 0x100000>;
+
+ mbusc: mbus-controller@20000 {
+ compatible = "marvell,mbus-controller";
+ reg = <0x20000 0x100>, <0x20180 0x20>;
+ };
+
+ /* more children ...*/
+ };
+ };
+
+In the shown example, the translation entry in the 'ranges' property is what
+makes the MBus driver create a static decoding window for the corresponding
+given child device. Note that the binding does not require child nodes to be
+present. Of course, child nodes are needed to probe the devices.
+
+Since each window is identified by its target ID and attribute ID there's
+a special macro that can be use to simplify the translation entries:
+
+#define MBUS_ID(target,attributes) (((target) << 24) | ((attributes) << 16))
+
+Using this macro, the above example would be:
+
+ soc {
+ compatible = "marvell,armada370-mbus", "simple-bus";
+ #address-cells = <2>;
+ #size-cells = <1>;
+ controller = <&mbusc>;
+
+ ranges = < MBUS_ID(0xf0, 0x01) 0 0 0xd0000000 0x100000
+ MBUS_ID(0x01, 0xe0) 0 0 0xfff00000 0x100000>;
+
+ bootrom {
+ compatible = "marvell,bootrom";
+ reg = <MBUS_ID(0x01, 0xe0) 0 0x100000>;
+ };
+
+ /* other children */
+ ...
+
+ internal-regs {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 MBUS_ID(0xf0, 0x01) 0 0x100000>;
+
+ mbusc: mbus-controller@20000 {
+ compatible = "marvell,mbus-controller";
+ reg = <0x20000 0x100>, <0x20180 0x20>;
+ };
+
+ /* other children */
+ ...
+ };
+ };
+
+
+** About the window base address
+
+Remember the MBus controller allows a great deal of flexibility for choosing
+the decoding window base address. When planning the device tree layout it's
+possible to choose any address as the base address, provided of course there's
+a region large enough available, and with the required alignment.
+
+Yet in other words: there's nothing preventing us from setting a base address
+of 0xf0000000, or 0xd0000000 for the NOR device shown above, if such region is
+unused.
+
+** Window allocation policy
+
+The mbus-node ranges property defines a set of mbus windows that are expected
+to be set by the operating system and that are guaranteed to be free of overlaps
+with one another or with the system memory ranges.
+
+Each entry in the property refers to exactly one window. If the operating system
+choses to use a different set of mbus windows, it must ensure that any address
+translations performed from downstream devices are adapted accordingly.
+
+The operating system may insert additional mbus windows that do not conflict
+with the ones listed in the ranges, e.g. for mapping PCIe devices.
+As a special case, the internal register window must be set up by the boot
+loader at the address listed in the ranges property, since access to that region
+is needed to set up the other windows.
+
+** Example
+
+See the example below, where a more complete device tree is shown:
+
+ soc {
+ compatible = "marvell,armadaxp-mbus", "simple-bus";
+ controller = <&mbusc>;
+
+ ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xd0000000 0x100000 /* internal-regs */
+ MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000
+ MBUS_ID(0x01, 0x2f) 0 0 0xf0000000 0x8000000>;
+
+ bootrom {
+ compatible = "marvell,bootrom";
+ reg = <MBUS_ID(0x01, 0x1d) 0 0x100000>;
+ };
+
+ devbus-bootcs {
+ status = "okay";
+ ranges = <0 MBUS_ID(0x01, 0x2f) 0 0x8000000>;
+
+ /* NOR */
+ nor {
+ compatible = "cfi-flash";
+ reg = <0 0x8000000>;
+ bank-width = <2>;
+ };
+ };
+
+ pcie-controller {
+ compatible = "marvell,armada-xp-pcie";
+ status = "okay";
+ device_type = "pci";
+
+ #address-cells = <3>;
+ #size-cells = <2>;
+
+ ranges =
+ <0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000 /* Port 0.0 registers */
+ 0x82000000 0 0x42000 MBUS_ID(0xf0, 0x01) 0x42000 0 0x00002000 /* Port 2.0 registers */
+ 0x82000000 0 0x44000 MBUS_ID(0xf0, 0x01) 0x44000 0 0x00002000 /* Port 0.1 registers */
+ 0x82000000 0 0x48000 MBUS_ID(0xf0, 0x01) 0x48000 0 0x00002000 /* Port 0.2 registers */
+ 0x82000000 0 0x4c000 MBUS_ID(0xf0, 0x01) 0x4c000 0 0x00002000 /* Port 0.3 registers */
+ 0x82000800 0 0xe0000000 MBUS_ID(0x04, 0xe8) 0xe0000000 0 0x08000000 /* Port 0.0 MEM */
+ 0x81000800 0 0 MBUS_ID(0x04, 0xe0) 0xe8000000 0 0x00100000 /* Port 0.0 IO */>;
+
+
+ pcie@1,0 {
+ /* Port 0, Lane 0 */
+ status = "okay";
+ };
+ };
+
+ internal-regs {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 MBUS_ID(0xf0, 0x01) 0 0x100000>;
+
+ mbusc: mbus-controller@20000 {
+ reg = <0x20000 0x100>, <0x20180 0x20>;
+ };
+
+ interrupt-controller@20000 {
+ reg = <0x20a00 0x2d0>, <0x21070 0x58>;
+ };
+ };
+ };
diff --git a/Documentation/devicetree/bindings/clock/imx5-clock.txt b/Documentation/devicetree/bindings/clock/imx5-clock.txt
index f46f562..4c029a8 100644
--- a/Documentation/devicetree/bindings/clock/imx5-clock.txt
+++ b/Documentation/devicetree/bindings/clock/imx5-clock.txt
@@ -197,6 +197,7 @@
spdif0_gate 183
spdif1_gate 184
spdif_ipg_gate 185
+ ocram 186
Examples (for mx53):
diff --git a/Documentation/devicetree/bindings/clock/imx6q-clock.txt b/Documentation/devicetree/bindings/clock/imx6q-clock.txt
index a0e104f..5a90a72 100644
--- a/Documentation/devicetree/bindings/clock/imx6q-clock.txt
+++ b/Documentation/devicetree/bindings/clock/imx6q-clock.txt
@@ -209,6 +209,12 @@
pll5_post_div 194
pll5_video_div 195
eim_slow 196
+ spdif 197
+ cko2_sel 198
+ cko2_podf 199
+ cko2 200
+ cko 201
+ vdoa 202
Examples:
diff --git a/Documentation/devicetree/bindings/pci/mvebu-pci.txt b/Documentation/devicetree/bindings/pci/mvebu-pci.txt
index f8d4058..9556e2f 100644
--- a/Documentation/devicetree/bindings/pci/mvebu-pci.txt
+++ b/Documentation/devicetree/bindings/pci/mvebu-pci.txt
@@ -1,6 +1,7 @@
* Marvell EBU PCIe interfaces
Mandatory properties:
+
- compatible: one of the following values:
marvell,armada-370-pcie
marvell,armada-xp-pcie
@@ -10,11 +11,49 @@
- #interrupt-cells, set to <1>
- bus-range: PCI bus numbers covered
- device_type, set to "pci"
-- ranges: ranges for the PCI memory and I/O regions, as well as the
- MMIO registers to control the PCIe interfaces.
+- ranges: ranges describing the MMIO registers to control the PCIe
+ interfaces, and ranges describing the MBus windows needed to access
+ the memory and I/O regions of each PCIe interface.
-In addition, the Device Tree node must have sub-nodes describing each
+The ranges describing the MMIO registers have the following layout:
+
+ 0x82000000 0 r MBUS_ID(0xf0, 0x01) r 0 s
+
+where:
+
+ * r is a 32-bits value that gives the offset of the MMIO
+ registers of this PCIe interface, from the base of the internal
+ registers.
+
+ * s is a 32-bits value that give the size of this MMIO
+ registers area. This range entry translates the '0x82000000 0 r' PCI
+ address into the 'MBUS_ID(0xf0, 0x01) r' CPU address, which is part
+ of the internal register window (as identified by MBUS_ID(0xf0,
+ 0x01)).
+
+The ranges describing the MBus windows have the following layout:
+
+ 0x8t000000 s 0 MBUS_ID(w, a) 0 1 0
+
+where:
+
+ * t is the type of the MBus window (as defined by the standard PCI DT
+ bindings), 1 for I/O and 2 for memory.
+
+ * s is the PCI slot that corresponds to this PCIe interface
+
+ * w is the 'target ID' value for the MBus window
+
+ * a the 'attribute' value for the MBus window.
+
+Since the location and size of the different MBus windows is not fixed in
+hardware, and only determined in runtime, those ranges cover the full first
+4 GB of the physical address space, and do not translate into a valid CPU
+address.
+
+In addition, the device tree node must have sub-nodes describing each
PCIe interface, having the following mandatory properties:
+
- reg: used only for interrupt mapping, so only the first four bytes
are used to refer to the correct bus number and device number.
- assigned-addresses: reference to the MMIO registers used to control
@@ -26,7 +65,8 @@
- #address-cells, set to <3>
- #size-cells, set to <2>
- #interrupt-cells, set to <1>
-- ranges, empty property.
+- ranges, translating the MBus windows ranges of the parent node into
+ standard PCI addresses.
- interrupt-map-mask and interrupt-map, standard PCI properties to
define the mapping of the PCIe interface to interrupt numbers.
@@ -47,27 +87,50 @@
bus-range = <0x00 0xff>;
- ranges = <0x82000000 0 0xd0040000 0xd0040000 0 0x00002000 /* Port 0.0 registers */
- 0x82000000 0 0xd0042000 0xd0042000 0 0x00002000 /* Port 2.0 registers */
- 0x82000000 0 0xd0044000 0xd0044000 0 0x00002000 /* Port 0.1 registers */
- 0x82000000 0 0xd0048000 0xd0048000 0 0x00002000 /* Port 0.2 registers */
- 0x82000000 0 0xd004c000 0xd004c000 0 0x00002000 /* Port 0.3 registers */
- 0x82000000 0 0xd0080000 0xd0080000 0 0x00002000 /* Port 1.0 registers */
- 0x82000000 0 0xd0082000 0xd0082000 0 0x00002000 /* Port 3.0 registers */
- 0x82000000 0 0xd0084000 0xd0084000 0 0x00002000 /* Port 1.1 registers */
- 0x82000000 0 0xd0088000 0xd0088000 0 0x00002000 /* Port 1.2 registers */
- 0x82000000 0 0xd008c000 0xd008c000 0 0x00002000 /* Port 1.3 registers */
- 0x82000000 0 0xe0000000 0xe0000000 0 0x08000000 /* non-prefetchable memory */
- 0x81000000 0 0 0xe8000000 0 0x00100000>; /* downstream I/O */
+ ranges =
+ <0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000 /* Port 0.0 registers */
+ 0x82000000 0 0x42000 MBUS_ID(0xf0, 0x01) 0x42000 0 0x00002000 /* Port 2.0 registers */
+ 0x82000000 0 0x44000 MBUS_ID(0xf0, 0x01) 0x44000 0 0x00002000 /* Port 0.1 registers */
+ 0x82000000 0 0x48000 MBUS_ID(0xf0, 0x01) 0x48000 0 0x00002000 /* Port 0.2 registers */
+ 0x82000000 0 0x4c000 MBUS_ID(0xf0, 0x01) 0x4c000 0 0x00002000 /* Port 0.3 registers */
+ 0x82000000 0 0x80000 MBUS_ID(0xf0, 0x01) 0x80000 0 0x00002000 /* Port 1.0 registers */
+ 0x82000000 0 0x82000 MBUS_ID(0xf0, 0x01) 0x82000 0 0x00002000 /* Port 3.0 registers */
+ 0x82000000 0 0x84000 MBUS_ID(0xf0, 0x01) 0x84000 0 0x00002000 /* Port 1.1 registers */
+ 0x82000000 0 0x88000 MBUS_ID(0xf0, 0x01) 0x88000 0 0x00002000 /* Port 1.2 registers */
+ 0x82000000 0 0x8c000 MBUS_ID(0xf0, 0x01) 0x8c000 0 0x00002000 /* Port 1.3 registers */
+ 0x82000000 0x1 0 MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 0.0 MEM */
+ 0x81000000 0x1 0 MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 0.0 IO */
+ 0x82000000 0x2 0 MBUS_ID(0x04, 0xd8) 0 1 0 /* Port 0.1 MEM */
+ 0x81000000 0x2 0 MBUS_ID(0x04, 0xd0) 0 1 0 /* Port 0.1 IO */
+ 0x82000000 0x3 0 MBUS_ID(0x04, 0xb8) 0 1 0 /* Port 0.2 MEM */
+ 0x81000000 0x3 0 MBUS_ID(0x04, 0xb0) 0 1 0 /* Port 0.2 IO */
+ 0x82000000 0x4 0 MBUS_ID(0x04, 0x78) 0 1 0 /* Port 0.3 MEM */
+ 0x81000000 0x4 0 MBUS_ID(0x04, 0x70) 0 1 0 /* Port 0.3 IO */
+
+ 0x82000000 0x5 0 MBUS_ID(0x08, 0xe8) 0 1 0 /* Port 1.0 MEM */
+ 0x81000000 0x5 0 MBUS_ID(0x08, 0xe0) 0 1 0 /* Port 1.0 IO */
+ 0x82000000 0x6 0 MBUS_ID(0x08, 0xd8) 0 1 0 /* Port 1.1 MEM */
+ 0x81000000 0x6 0 MBUS_ID(0x08, 0xd0) 0 1 0 /* Port 1.1 IO */
+ 0x82000000 0x7 0 MBUS_ID(0x08, 0xb8) 0 1 0 /* Port 1.2 MEM */
+ 0x81000000 0x7 0 MBUS_ID(0x08, 0xb0) 0 1 0 /* Port 1.2 IO */
+ 0x82000000 0x8 0 MBUS_ID(0x08, 0x78) 0 1 0 /* Port 1.3 MEM */
+ 0x81000000 0x8 0 MBUS_ID(0x08, 0x70) 0 1 0 /* Port 1.3 IO */
+
+ 0x82000000 0x9 0 MBUS_ID(0x04, 0xf8) 0 1 0 /* Port 2.0 MEM */
+ 0x81000000 0x9 0 MBUS_ID(0x04, 0xf0) 0 1 0 /* Port 2.0 IO */
+
+ 0x82000000 0xa 0 MBUS_ID(0x08, 0xf8) 0 1 0 /* Port 3.0 MEM */
+ 0x81000000 0xa 0 MBUS_ID(0x08, 0xf0) 0 1 0 /* Port 3.0 IO */>;
pcie@1,0 {
device_type = "pci";
- assigned-addresses = <0x82000800 0 0xd0040000 0 0x2000>;
+ assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
reg = <0x0800 0 0 0 0>;
#address-cells = <3>;
#size-cells = <2>;
#interrupt-cells = <1>;
- ranges;
+ ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
+ 0x81000000 0 0 0x81000000 0x1 0 1 0>;
interrupt-map-mask = <0 0 0 0>;
interrupt-map = <0 0 0 0 &mpic 58>;
marvell,pcie-port = <0>;
@@ -78,12 +141,13 @@
pcie@2,0 {
device_type = "pci";
- assigned-addresses = <0x82001000 0 0xd0044000 0 0x2000>;
+ assigned-addresses = <0x82001000 0 0x44000 0 0x2000>;
reg = <0x1000 0 0 0 0>;
#address-cells = <3>;
#size-cells = <2>;
#interrupt-cells = <1>;
- ranges;
+ ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
+ 0x81000000 0 0 0x81000000 0x2 0 1 0>;
interrupt-map-mask = <0 0 0 0>;
interrupt-map = <0 0 0 0 &mpic 59>;
marvell,pcie-port = <0>;
@@ -94,12 +158,13 @@
pcie@3,0 {
device_type = "pci";
- assigned-addresses = <0x82001800 0 0xd0048000 0 0x2000>;
+ assigned-addresses = <0x82001800 0 0x48000 0 0x2000>;
reg = <0x1800 0 0 0 0>;
#address-cells = <3>;
#size-cells = <2>;
#interrupt-cells = <1>;
- ranges;
+ ranges = <0x82000000 0 0 0x82000000 0x3 0 1 0
+ 0x81000000 0 0 0x81000000 0x3 0 1 0>;
interrupt-map-mask = <0 0 0 0>;
interrupt-map = <0 0 0 0 &mpic 60>;
marvell,pcie-port = <0>;
@@ -110,12 +175,13 @@
pcie@4,0 {
device_type = "pci";
- assigned-addresses = <0x82002000 0 0xd004c000 0 0x2000>;
+ assigned-addresses = <0x82002000 0 0x4c000 0 0x2000>;
reg = <0x2000 0 0 0 0>;
#address-cells = <3>;
#size-cells = <2>;
#interrupt-cells = <1>;
- ranges;
+ ranges = <0x82000000 0 0 0x82000000 0x4 0 1 0
+ 0x81000000 0 0 0x81000000 0x4 0 1 0>;
interrupt-map-mask = <0 0 0 0>;
interrupt-map = <0 0 0 0 &mpic 61>;
marvell,pcie-port = <0>;
@@ -126,12 +192,13 @@
pcie@5,0 {
device_type = "pci";
- assigned-addresses = <0x82002800 0 0xd0080000 0 0x2000>;
+ assigned-addresses = <0x82002800 0 0x80000 0 0x2000>;
reg = <0x2800 0 0 0 0>;
#address-cells = <3>;
#size-cells = <2>;
#interrupt-cells = <1>;
- ranges;
+ ranges = <0x82000000 0 0 0x82000000 0x5 0 1 0
+ 0x81000000 0 0 0x81000000 0x5 0 1 0>;
interrupt-map-mask = <0 0 0 0>;
interrupt-map = <0 0 0 0 &mpic 62>;
marvell,pcie-port = <1>;
@@ -142,12 +209,13 @@
pcie@6,0 {
device_type = "pci";
- assigned-addresses = <0x82003000 0 0xd0084000 0 0x2000>;
+ assigned-addresses = <0x82003000 0 0x84000 0 0x2000>;
reg = <0x3000 0 0 0 0>;
#address-cells = <3>;
#size-cells = <2>;
#interrupt-cells = <1>;
- ranges;
+ ranges = <0x82000000 0 0 0x82000000 0x6 0 1 0
+ 0x81000000 0 0 0x81000000 0x6 0 1 0>;
interrupt-map-mask = <0 0 0 0>;
interrupt-map = <0 0 0 0 &mpic 63>;
marvell,pcie-port = <1>;
@@ -158,12 +226,13 @@
pcie@7,0 {
device_type = "pci";
- assigned-addresses = <0x82003800 0 0xd0088000 0 0x2000>;
+ assigned-addresses = <0x82003800 0 0x88000 0 0x2000>;
reg = <0x3800 0 0 0 0>;
#address-cells = <3>;
#size-cells = <2>;
#interrupt-cells = <1>;
- ranges;
+ ranges = <0x82000000 0 0 0x82000000 0x7 0 1 0
+ 0x81000000 0 0 0x81000000 0x7 0 1 0>;
interrupt-map-mask = <0 0 0 0>;
interrupt-map = <0 0 0 0 &mpic 64>;
marvell,pcie-port = <1>;
@@ -174,12 +243,13 @@
pcie@8,0 {
device_type = "pci";
- assigned-addresses = <0x82004000 0 0xd008c000 0 0x2000>;
+ assigned-addresses = <0x82004000 0 0x8c000 0 0x2000>;
reg = <0x4000 0 0 0 0>;
#address-cells = <3>;
#size-cells = <2>;
#interrupt-cells = <1>;
- ranges;
+ ranges = <0x82000000 0 0 0x82000000 0x8 0 1 0
+ 0x81000000 0 0 0x81000000 0x8 0 1 0>;
interrupt-map-mask = <0 0 0 0>;
interrupt-map = <0 0 0 0 &mpic 65>;
marvell,pcie-port = <1>;
@@ -187,14 +257,16 @@
clocks = <&gateclk 12>;
status = "disabled";
};
+
pcie@9,0 {
device_type = "pci";
- assigned-addresses = <0x82004800 0 0xd0042000 0 0x2000>;
+ assigned-addresses = <0x82004800 0 0x42000 0 0x2000>;
reg = <0x4800 0 0 0 0>;
#address-cells = <3>;
#size-cells = <2>;
#interrupt-cells = <1>;
- ranges;
+ ranges = <0x82000000 0 0 0x82000000 0x9 0 1 0
+ 0x81000000 0 0 0x81000000 0x9 0 1 0>;
interrupt-map-mask = <0 0 0 0>;
interrupt-map = <0 0 0 0 &mpic 99>;
marvell,pcie-port = <2>;
@@ -205,12 +277,13 @@
pcie@10,0 {
device_type = "pci";
- assigned-addresses = <0x82005000 0 0xd0082000 0 0x2000>;
+ assigned-addresses = <0x82005000 0 0x82000 0 0x2000>;
reg = <0x5000 0 0 0 0>;
#address-cells = <3>;
#size-cells = <2>;
#interrupt-cells = <1>;
- ranges;
+ ranges = <0x82000000 0 0 0x82000000 0xa 0 1 0
+ 0x81000000 0 0 0x81000000 0xa 0 1 0>;
interrupt-map-mask = <0 0 0 0>;
interrupt-map = <0 0 0 0 &mpic 103>;
marvell,pcie-port = <3>;
diff --git a/Documentation/devicetree/bindings/pci/nvidia,tegra20-pcie.txt b/Documentation/devicetree/bindings/pci/nvidia,tegra20-pcie.txt
new file mode 100644
index 0000000..6b75107
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/nvidia,tegra20-pcie.txt
@@ -0,0 +1,163 @@
+NVIDIA Tegra PCIe controller
+
+Required properties:
+- compatible: "nvidia,tegra20-pcie" or "nvidia,tegra30-pcie"
+- device_type: Must be "pci"
+- reg: A list of physical base address and length for each set of controller
+ registers. Must contain an entry for each entry in the reg-names property.
+- reg-names: Must include the following entries:
+ "pads": PADS registers
+ "afi": AFI registers
+ "cs": configuration space region
+- interrupts: A list of interrupt outputs of the controller. Must contain an
+ entry for each entry in the interrupt-names property.
+- interrupt-names: Must include the following entries:
+ "intr": The Tegra interrupt that is asserted for controller interrupts
+ "msi": The Tegra interrupt that is asserted when an MSI is received
+- pex-clk-supply: Supply voltage for internal reference clock
+- vdd-supply: Power supply for controller (1.05V)
+- avdd-supply: Power supply for controller (1.05V) (not required for Tegra20)
+- bus-range: Range of bus numbers associated with this controller
+- #address-cells: Address representation for root ports (must be 3)
+ - cell 0 specifies the bus and device numbers of the root port:
+ [23:16]: bus number
+ [15:11]: device number
+ - cell 1 denotes the upper 32 address bits and should be 0
+ - cell 2 contains the lower 32 address bits and is used to translate to the
+ CPU address space
+- #size-cells: Size representation for root ports (must be 2)
+- ranges: Describes the translation of addresses for root ports and standard
+ PCI regions. The entries must be 6 cells each, where the first three cells
+ correspond to the address as described for the #address-cells property
+ above, the fourth cell is the physical CPU address to translate to and the
+ fifth and six cells are as described for the #size-cells property above.
+ - The first two entries are expected to translate the addresses for the root
+ port registers, which are referenced by the assigned-addresses property of
+ the root port nodes (see below).
+ - The remaining entries setup the mapping for the standard I/O, memory and
+ prefetchable PCI regions. The first cell determines the type of region
+ that is setup:
+ - 0x81000000: I/O memory region
+ - 0x82000000: non-prefetchable memory region
+ - 0xc2000000: prefetchable memory region
+ Please refer to the standard PCI bus binding document for a more detailed
+ explanation.
+- clocks: List of clock inputs of the controller. Must contain an entry for
+ each entry in the clock-names property.
+- clock-names: Must include the following entries:
+ "pex": The Tegra clock of that name
+ "afi": The Tegra clock of that name
+ "pcie_xclk": The Tegra clock of that name
+ "pll_e": The Tegra clock of that name
+ "cml": The Tegra clock of that name (not required for Tegra20)
+
+Root ports are defined as subnodes of the PCIe controller node.
+
+Required properties:
+- device_type: Must be "pci"
+- assigned-addresses: Address and size of the port configuration registers
+- reg: PCI bus address of the root port
+- #address-cells: Must be 3
+- #size-cells: Must be 2
+- ranges: Sub-ranges distributed from the PCIe controller node. An empty
+ property is sufficient.
+- nvidia,num-lanes: Number of lanes to use for this port. Valid combinations
+ are:
+ - Root port 0 uses 4 lanes, root port 1 is unused.
+ - Both root ports use 2 lanes.
+
+Example:
+
+SoC DTSI:
+
+ pcie-controller {
+ compatible = "nvidia,tegra20-pcie";
+ device_type = "pci";
+ reg = <0x80003000 0x00000800 /* PADS registers */
+ 0x80003800 0x00000200 /* AFI registers */
+ 0x90000000 0x10000000>; /* configuration space */
+ reg-names = "pads", "afi", "cs";
+ interrupts = <0 98 0x04 /* controller interrupt */
+ 0 99 0x04>; /* MSI interrupt */
+ interrupt-names = "intr", "msi";
+
+ bus-range = <0x00 0xff>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+
+ ranges = <0x82000000 0 0x80000000 0x80000000 0 0x00001000 /* port 0 registers */
+ 0x82000000 0 0x80001000 0x80001000 0 0x00001000 /* port 1 registers */
+ 0x81000000 0 0 0x82000000 0 0x00010000 /* downstream I/O */
+ 0x82000000 0 0xa0000000 0xa0000000 0 0x10000000 /* non-prefetchable memory */
+ 0xc2000000 0 0xb0000000 0xb0000000 0 0x10000000>; /* prefetchable memory */
+
+ clocks = <&tegra_car 70>, <&tegra_car 72>, <&tegra_car 74>,
+ <&tegra_car 118>;
+ clock-names = "pex", "afi", "pcie_xclk", "pll_e";
+ status = "disabled";
+
+ pci@1,0 {
+ device_type = "pci";
+ assigned-addresses = <0x82000800 0 0x80000000 0 0x1000>;
+ reg = <0x000800 0 0 0 0>;
+ status = "disabled";
+
+ #address-cells = <3>;
+ #size-cells = <2>;
+
+ ranges;
+
+ nvidia,num-lanes = <2>;
+ };
+
+ pci@2,0 {
+ device_type = "pci";
+ assigned-addresses = <0x82001000 0 0x80001000 0 0x1000>;
+ reg = <0x001000 0 0 0 0>;
+ status = "disabled";
+
+ #address-cells = <3>;
+ #size-cells = <2>;
+
+ ranges;
+
+ nvidia,num-lanes = <2>;
+ };
+ };
+
+
+Board DTS:
+
+ pcie-controller {
+ status = "okay";
+
+ vdd-supply = <&pci_vdd_reg>;
+ pex-clk-supply = <&pci_clk_reg>;
+
+ /* root port 00:01.0 */
+ pci@1,0 {
+ status = "okay";
+
+ /* bridge 01:00.0 (optional) */
+ pci@0,0 {
+ reg = <0x010000 0 0 0 0>;
+
+ #address-cells = <3>;
+ #size-cells = <2>;
+
+ device_type = "pci";
+
+ /* endpoint 02:00.0 */
+ pci@0,0 {
+ reg = <0x020000 0 0 0 0>;
+ };
+ };
+ };
+ };
+
+Note that devices on the PCI bus are dynamically discovered using PCI's bus
+enumeration and therefore don't need corresponding device nodes in DT. However
+if a device on the PCI bus provides a non-probeable bus such as I2C or SPI,
+device nodes need to be added in order to allow the bus' children to be
+instantiated at the proper location in the operating system's device tree (as
+illustrated by the optional nodes in the example above).
diff --git a/Documentation/devicetree/bindings/watchdog/sun4i-wdt.txt b/Documentation/devicetree/bindings/watchdog/sun4i-wdt.txt
deleted file mode 100644
index ecd650a..0000000
--- a/Documentation/devicetree/bindings/watchdog/sun4i-wdt.txt
+++ /dev/null
@@ -1,13 +0,0 @@
-Allwinner sun4i Watchdog timer
-
-Required properties:
-
-- compatible : should be "allwinner,sun4i-wdt"
-- reg : Specifies base physical address and size of the registers.
-
-Example:
-
-wdt: watchdog@01c20c90 {
- compatible = "allwinner,sun4i-wdt";
- reg = <0x01c20c90 0x10>;
-};
diff --git a/Documentation/devicetree/bindings/watchdog/sunxi-wdt.txt b/Documentation/devicetree/bindings/watchdog/sunxi-wdt.txt
new file mode 100644
index 0000000..e39cb26
--- /dev/null
+++ b/Documentation/devicetree/bindings/watchdog/sunxi-wdt.txt
@@ -0,0 +1,14 @@
+Allwinner SoCs Watchdog timer
+
+Required properties:
+
+- compatible : should be "allwinner,<soc-family>-wdt", the currently supported
+ SoC families being sun4i and sun6i
+- reg : Specifies base physical address and size of the registers.
+
+Example:
+
+wdt: watchdog@01c20c90 {
+ compatible = "allwinner,sun4i-wdt";
+ reg = <0x01c20c90 0x10>;
+};
diff --git a/MAINTAINERS b/MAINTAINERS
index 6bc2d87..1053317 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -6315,6 +6315,13 @@
F: drivers/pci/
F: include/linux/pci*
+PCI DRIVER FOR NVIDIA TEGRA
+M: Thierry Reding <thierry.reding@gmail.com>
+L: linux-tegra@vger.kernel.org
+S: Supported
+F: Documentation/devicetree/bindings/pci/nvidia,tegra20-pcie.txt
+F: drivers/pci/host/pci-tegra.c
+
PCMCIA SUBSYSTEM
P: Linux PCMCIA Team
L: linux-pcmcia@lists.infradead.org
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index bf79764..a00f4c1 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -442,7 +442,6 @@
config ARCH_IOP13XX
bool "IOP13xx-based"
depends on MMU
- select ARCH_SUPPORTS_MSI
select CPU_XSC3
select NEED_MACH_MEMORY_H
select NEED_RET_TO_USER
@@ -1600,7 +1599,7 @@
config ARCH_NR_GPIO
int
default 1024 if ARCH_SHMOBILE || ARCH_TEGRA
- default 512 if ARCH_EXYNOS || ARCH_KEYSTONE || SOC_OMAP5
+ default 512 if ARCH_EXYNOS || ARCH_KEYSTONE || SOC_OMAP5 || SOC_DRA7XX
default 392 if ARCH_U8500
default 352 if ARCH_VT8500
default 288 if ARCH_SUNXI
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 454288d..f9f4c4d 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -91,6 +91,7 @@
kirkwood-ns2max.dtb \
kirkwood-ns2mini.dtb \
kirkwood-nsa310.dtb \
+ kirkwood-nsa310a.dtb \
kirkwood-sheevaplug.dtb \
kirkwood-sheevaplug-esata.dtb \
kirkwood-topkick.dtb \
@@ -102,7 +103,9 @@
msm8960-cdp.dtb
dtb-$(CONFIG_ARCH_MVEBU) += armada-370-db.dtb \
armada-370-mirabox.dtb \
+ armada-370-netgear-rn102.dtb \
armada-370-rd.dtb \
+ armada-xp-axpwifiap.dtb \
armada-xp-db.dtb \
armada-xp-gp.dtb \
armada-xp-openblocks-ax3-4.dtb
@@ -114,6 +117,8 @@
imx27-pdk.dtb \
imx27-phytec-phycore-som.dtb \
imx27-phytec-phycore-rdk.dtb \
+ imx27-phytec-phycard-s-som.dtb \
+ imx27-phytec-phycard-s-rdk.dtb \
imx31-bug.dtb \
imx51-apf51.dtb \
imx51-apf51dev.dtb \
@@ -133,6 +138,7 @@
imx6q-sabrelite.dtb \
imx6q-sabresd.dtb \
imx6q-sbc6x.dtb \
+ imx6q-wandboard.dtb \
imx6sl-evk.dtb \
vf610-twr.dtb
dtb-$(CONFIG_ARCH_MXS) += imx23-evk.dtb \
diff --git a/arch/arm/boot/dts/armada-370-db.dts b/arch/arm/boot/dts/armada-370-db.dts
index beee169..90ce29d 100644
--- a/arch/arm/boot/dts/armada-370-db.dts
+++ b/arch/arm/boot/dts/armada-370-db.dts
@@ -14,7 +14,7 @@
*/
/dts-v1/;
-/include/ "armada-370.dtsi"
+#include "armada-370.dtsi"
/ {
model = "Marvell Armada 370 Evaluation Board";
@@ -30,6 +30,9 @@
};
soc {
+ ranges = <MBUS_ID(0xf0, 0x01) 0 0xd0000000 0x100000
+ MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000>;
+
internal-regs {
serial@12000 {
clock-frequency = <200000000>;
diff --git a/arch/arm/boot/dts/armada-370-mirabox.dts b/arch/arm/boot/dts/armada-370-mirabox.dts
index 45b1077..2471d9d 100644
--- a/arch/arm/boot/dts/armada-370-mirabox.dts
+++ b/arch/arm/boot/dts/armada-370-mirabox.dts
@@ -9,7 +9,7 @@
*/
/dts-v1/;
-/include/ "armada-370.dtsi"
+#include "armada-370.dtsi"
/ {
model = "Globalscale Mirabox";
@@ -25,6 +25,25 @@
};
soc {
+ ranges = <MBUS_ID(0xf0, 0x01) 0 0xd0000000 0x100000
+ MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000>;
+
+ pcie-controller {
+ status = "okay";
+
+ /* Internal mini-PCIe connector */
+ pcie@1,0 {
+ /* Port 0, Lane 0 */
+ status = "okay";
+ };
+
+ /* Connected on the PCB to a USB 3.0 XHCI controller */
+ pcie@2,0 {
+ /* Port 1, Lane 0 */
+ status = "okay";
+ };
+ };
+
internal-regs {
serial@12000 {
clock-frequency = <200000000>;
@@ -120,22 +139,6 @@
reg = <0x25>;
};
};
-
- pcie-controller {
- status = "okay";
-
- /* Internal mini-PCIe connector */
- pcie@1,0 {
- /* Port 0, Lane 0 */
- status = "okay";
- };
-
- /* Connected on the PCB to a USB 3.0 XHCI controller */
- pcie@2,0 {
- /* Port 1, Lane 0 */
- status = "okay";
- };
- };
};
};
};
diff --git a/arch/arm/boot/dts/armada-370-netgear-rn102.dts b/arch/arm/boot/dts/armada-370-netgear-rn102.dts
new file mode 100644
index 0000000..05e4485
--- /dev/null
+++ b/arch/arm/boot/dts/armada-370-netgear-rn102.dts
@@ -0,0 +1,179 @@
+/*
+ * Device Tree file for NETGEAR ReadyNAS 102
+ *
+ * Copyright (C) 2013, Arnaud EBALARD <arno@natisbad.org>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+/dts-v1/;
+
+#include "armada-370.dtsi"
+
+/ {
+ model = "NETGEAR ReadyNAS 102";
+ compatible = "netgear,readynas-102", "marvell,armada370", "marvell,armada-370-xp";
+
+ chosen {
+ bootargs = "console=ttyS0,115200 earlyprintk";
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0x00000000 0x20000000>; /* 512 MB */
+ };
+
+ soc {
+ internal-regs {
+ serial@12000 {
+ clock-frequency = <200000000>;
+ status = "okay";
+ };
+
+ sata@a0000 {
+ nr-ports = <2>;
+ status = "okay";
+ };
+
+ pinctrl {
+ power_led_pin: power-led-pin {
+ marvell,pins = "mpp57";
+ marvell,function = "gpio";
+ };
+ sata1_led_pin: sata1-led-pin {
+ marvell,pins = "mpp15";
+ marvell,function = "gpio";
+ };
+
+ sata2_led_pin: sata2-led-pin {
+ marvell,pins = "mpp14";
+ marvell,function = "gpio";
+ };
+
+ backup_led_pin: backup-led-pin {
+ marvell,pins = "mpp56";
+ marvell,function = "gpio";
+ };
+ };
+
+ mdio {
+ phy0: ethernet-phy@0 {
+ reg = <0>;
+ };
+ };
+
+ ethernet@74000 {
+ status = "okay";
+ phy = <&phy0>;
+ phy-mode = "rgmii-id";
+ };
+
+ usb@50000 {
+ status = "okay";
+ };
+
+ i2c@11000 {
+ compatible = "marvell,mv64xxx-i2c";
+ clock-frequency = <100000>;
+ status = "okay";
+
+ g762: g762@3e {
+ compatible = "gmt,g762";
+ reg = <0x3e>;
+ clocks = <&g762_clk>; /* input clock */
+ fan_gear_mode = <0>;
+ fan_startv = <1>;
+ pwm_polarity = <0>;
+ };
+ };
+
+ pcie-controller {
+ status = "okay";
+
+ /* Connected to Marvell SATA controller */
+ pcie@1,0 {
+ /* Port 0, Lane 0 */
+ status = "okay";
+ };
+
+ /* Connected to FL1009 USB 3.0 controller */
+ pcie@2,0 {
+ /* Port 1, Lane 0 */
+ status = "okay";
+ };
+ };
+ };
+ };
+
+ clocks {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ g762_clk: fixedclk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <8192>;
+ };
+ };
+
+ gpio_leds {
+ compatible = "gpio-leds";
+ pinctrl-0 = < &power_led_pin
+ &sata1_led_pin
+ &sata2_led_pin
+ &backup_led_pin >;
+ pinctrl-names = "default";
+
+ blue_power_led {
+ label = "rn102:blue:pwr";
+ gpios = <&gpio1 25 1>; /* GPIO 57 Active Low */
+ linux,default-trigger = "heartbeat";
+ };
+
+ green_sata1_led {
+ label = "rn102:green:sata1";
+ gpios = <&gpio0 15 1>; /* GPIO 15 Active Low */
+ default-state = "on";
+ };
+
+ green_sata2_led {
+ label = "rn102:green:sata2";
+ gpios = <&gpio0 14 1>; /* GPIO 14 Active Low */
+ default-state = "on";
+ };
+
+ green_backup_led {
+ label = "rn102:green:backup";
+ gpios = <&gpio1 24 1>; /* GPIO 56 Active Low */
+ default-state = "on";
+ };
+ };
+
+ gpio_keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ button@1 {
+ label = "Power Button";
+ linux,code = <116>; /* KEY_POWER */
+ gpios = <&gpio1 30 1>;
+ };
+
+ button@2 {
+ label = "Reset Button";
+ linux,code = <0x198>; /* KEY_RESTART */
+ gpios = <&gpio0 6 1>;
+ };
+
+ button@3 {
+ label = "Backup Button";
+ linux,code = <133>; /* KEY_COPY */
+ gpios = <&gpio1 26 1>;
+ };
+ };
+
+};
diff --git a/arch/arm/boot/dts/armada-370-rd.dts b/arch/arm/boot/dts/armada-370-rd.dts
index a3a2fed..f81810a 100644
--- a/arch/arm/boot/dts/armada-370-rd.dts
+++ b/arch/arm/boot/dts/armada-370-rd.dts
@@ -12,7 +12,7 @@
*/
/dts-v1/;
-/include/ "armada-370.dtsi"
+#include "armada-370.dtsi"
/ {
model = "Marvell Armada 370 Reference Design";
@@ -28,6 +28,25 @@
};
soc {
+ ranges = <MBUS_ID(0xf0, 0x01) 0 0xd0000000 0x100000
+ MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000>;
+
+ pcie-controller {
+ status = "okay";
+
+ /* Internal mini-PCIe connector */
+ pcie@1,0 {
+ /* Port 0, Lane 0 */
+ status = "okay";
+ };
+
+ /* Internal mini-PCIe connector */
+ pcie@2,0 {
+ /* Port 1, Lane 0 */
+ status = "okay";
+ };
+ };
+
internal-regs {
serial@12000 {
clock-frequency = <200000000>;
@@ -85,22 +104,6 @@
gpios = <&gpio0 6 1>;
};
};
-
- pcie-controller {
- status = "okay";
-
- /* Internal mini-PCIe connector */
- pcie@1,0 {
- /* Port 0, Lane 0 */
- status = "okay";
- };
-
- /* Internal mini-PCIe connector */
- pcie@2,0 {
- /* Port 1, Lane 0 */
- status = "okay";
- };
- };
};
};
};
diff --git a/arch/arm/boot/dts/armada-370-xp.dtsi b/arch/arm/boot/dts/armada-370-xp.dtsi
index 90b1176..1de2dae 100644
--- a/arch/arm/boot/dts/armada-370-xp.dtsi
+++ b/arch/arm/boot/dts/armada-370-xp.dtsi
@@ -18,6 +18,8 @@
/include/ "skeleton64.dtsi"
+#define MBUS_ID(target,attributes) (((target) << 24) | ((attributes) << 16))
+
/ {
model = "Marvell Armada 370 and XP SoC";
compatible = "marvell,armada-370-xp";
@@ -38,18 +40,73 @@
};
soc {
- #address-cells = <1>;
+ #address-cells = <2>;
#size-cells = <1>;
- compatible = "simple-bus";
+ controller = <&mbusc>;
interrupt-parent = <&mpic>;
- ranges = <0 0 0xd0000000 0x0100000 /* internal registers */
- 0xe0000000 0 0xe0000000 0x8100000 /* PCIe */>;
+ pcie-mem-aperture = <0xe0000000 0x8000000>;
+ pcie-io-aperture = <0xe8000000 0x100000>;
+
+ devbus-bootcs {
+ compatible = "marvell,mvebu-devbus";
+ reg = <MBUS_ID(0xf0, 0x01) 0x10400 0x8>;
+ ranges = <0 MBUS_ID(0x01, 0x2f) 0 0xffffffff>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ clocks = <&coreclk 0>;
+ status = "disabled";
+ };
+
+ devbus-cs0 {
+ compatible = "marvell,mvebu-devbus";
+ reg = <MBUS_ID(0xf0, 0x01) 0x10408 0x8>;
+ ranges = <0 MBUS_ID(0x01, 0x3e) 0 0xffffffff>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ clocks = <&coreclk 0>;
+ status = "disabled";
+ };
+
+ devbus-cs1 {
+ compatible = "marvell,mvebu-devbus";
+ reg = <MBUS_ID(0xf0, 0x01) 0x10410 0x8>;
+ ranges = <0 MBUS_ID(0x01, 0x3d) 0 0xffffffff>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ clocks = <&coreclk 0>;
+ status = "disabled";
+ };
+
+ devbus-cs2 {
+ compatible = "marvell,mvebu-devbus";
+ reg = <MBUS_ID(0xf0, 0x01) 0x10418 0x8>;
+ ranges = <0 MBUS_ID(0x01, 0x3b) 0 0xffffffff>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ clocks = <&coreclk 0>;
+ status = "disabled";
+ };
+
+ devbus-cs3 {
+ compatible = "marvell,mvebu-devbus";
+ reg = <MBUS_ID(0xf0, 0x01) 0x10420 0x8>;
+ ranges = <0 MBUS_ID(0x01, 0x37) 0 0xffffffff>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ clocks = <&coreclk 0>;
+ status = "disabled";
+ };
internal-regs {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
- ranges;
+ ranges = <0 MBUS_ID(0xf0, 0x01) 0 0x100000>;
+
+ mbusc: mbus-controller@20000 {
+ compatible = "marvell,mbus-controller";
+ reg = <0x20000 0x100>, <0x20180 0x20>;
+ };
mpic: interrupt-controller@20000 {
compatible = "marvell,mpic";
@@ -81,10 +138,8 @@
};
timer@20300 {
- compatible = "marvell,armada-370-xp-timer";
reg = <0x20300 0x30>, <0x21040 0x30>;
interrupts = <37>, <38>, <39>, <40>, <5>, <6>;
- clocks = <&coreclk 2>;
};
sata@a0000 {
@@ -195,50 +250,6 @@
status = "disabled";
};
- devbus-bootcs@10400 {
- compatible = "marvell,mvebu-devbus";
- reg = <0x10400 0x8>;
- #address-cells = <1>;
- #size-cells = <1>;
- clocks = <&coreclk 0>;
- status = "disabled";
- };
-
- devbus-cs0@10408 {
- compatible = "marvell,mvebu-devbus";
- reg = <0x10408 0x8>;
- #address-cells = <1>;
- #size-cells = <1>;
- clocks = <&coreclk 0>;
- status = "disabled";
- };
-
- devbus-cs1@10410 {
- compatible = "marvell,mvebu-devbus";
- reg = <0x10410 0x8>;
- #address-cells = <1>;
- #size-cells = <1>;
- clocks = <&coreclk 0>;
- status = "disabled";
- };
-
- devbus-cs2@10418 {
- compatible = "marvell,mvebu-devbus";
- reg = <0x10418 0x8>;
- #address-cells = <1>;
- #size-cells = <1>;
- clocks = <&coreclk 0>;
- status = "disabled";
- };
-
- devbus-cs3@10420 {
- compatible = "marvell,mvebu-devbus";
- reg = <0x10420 0x8>;
- #address-cells = <1>;
- #size-cells = <1>;
- clocks = <&coreclk 0>;
- status = "disabled";
- };
};
};
};
diff --git a/arch/arm/boot/dts/armada-370.dtsi b/arch/arm/boot/dts/armada-370.dtsi
index fa3dfc6..e134d7a 100644
--- a/arch/arm/boot/dts/armada-370.dtsi
+++ b/arch/arm/boot/dts/armada-370.dtsi
@@ -15,7 +15,7 @@
* common to all Armada SoCs.
*/
-/include/ "armada-370-xp.dtsi"
+#include "armada-370-xp.dtsi"
/include/ "skeleton.dtsi"
/ {
@@ -29,8 +29,66 @@
};
soc {
- ranges = <0 0xd0000000 0x0100000 /* internal registers */
- 0xe0000000 0xe0000000 0x8100000 /* PCIe */>;
+ compatible = "marvell,armada370-mbus", "simple-bus";
+
+ bootrom {
+ compatible = "marvell,bootrom";
+ reg = <MBUS_ID(0x01, 0xe0) 0 0x100000>;
+ };
+
+ pcie-controller {
+ compatible = "marvell,armada-370-pcie";
+ status = "disabled";
+ device_type = "pci";
+
+ #address-cells = <3>;
+ #size-cells = <2>;
+
+ bus-range = <0x00 0xff>;
+
+ ranges =
+ <0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000
+ 0x82000000 0 0x80000 MBUS_ID(0xf0, 0x01) 0x80000 0 0x00002000
+ 0x82000000 0x1 0 MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 0.0 MEM */
+ 0x81000000 0x1 0 MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 0.0 IO */
+ 0x82000000 0x2 0 MBUS_ID(0x08, 0xe8) 0 1 0 /* Port 1.0 MEM */
+ 0x81000000 0x2 0 MBUS_ID(0x08, 0xe0) 0 1 0 /* Port 1.0 IO */>;
+
+ pcie@1,0 {
+ device_type = "pci";
+ assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
+ reg = <0x0800 0 0 0 0>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+ ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
+ 0x81000000 0 0 0x81000000 0x1 0 1 0>;
+ interrupt-map-mask = <0 0 0 0>;
+ interrupt-map = <0 0 0 0 &mpic 58>;
+ marvell,pcie-port = <0>;
+ marvell,pcie-lane = <0>;
+ clocks = <&gateclk 5>;
+ status = "disabled";
+ };
+
+ pcie@2,0 {
+ device_type = "pci";
+ assigned-addresses = <0x82002800 0 0x80000 0 0x2000>;
+ reg = <0x1000 0 0 0 0>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+ ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
+ 0x81000000 0 0 0x81000000 0x2 0 1 0>;
+ interrupt-map-mask = <0 0 0 0>;
+ interrupt-map = <0 0 0 0 &mpic 62>;
+ marvell,pcie-port = <1>;
+ marvell,pcie-lane = <0>;
+ clocks = <&gateclk 9>;
+ status = "disabled";
+ };
+ };
+
internal-regs {
system-controller@18200 {
compatible = "marvell,armada-370-xp-system-controller";
@@ -78,7 +136,7 @@
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
- #interrupts-cells = <2>;
+ #interrupt-cells = <2>;
interrupts = <82>, <83>, <84>, <85>;
};
@@ -89,7 +147,7 @@
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
- #interrupts-cells = <2>;
+ #interrupt-cells = <2>;
interrupts = <87>, <88>, <89>, <90>;
};
@@ -100,10 +158,15 @@
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
- #interrupts-cells = <2>;
+ #interrupt-cells = <2>;
interrupts = <91>;
};
+ timer@20300 {
+ compatible = "marvell,armada-370-timer";
+ clocks = <&coreclk 2>;
+ };
+
coreclk: mvebu-sar@18230 {
compatible = "marvell,armada-370-core-clock";
reg = <0x18230 0x08>;
@@ -169,54 +232,6 @@
0x18304 0x4>;
status = "okay";
};
-
- pcie-controller {
- compatible = "marvell,armada-370-pcie";
- status = "disabled";
- device_type = "pci";
-
- #address-cells = <3>;
- #size-cells = <2>;
-
- bus-range = <0x00 0xff>;
-
- ranges = <0x82000000 0 0x40000 0x40000 0 0x00002000 /* Port 0.0 registers */
- 0x82000000 0 0x80000 0x80000 0 0x00002000 /* Port 1.0 registers */
- 0x82000000 0 0xe0000000 0xe0000000 0 0x08000000 /* non-prefetchable memory */
- 0x81000000 0 0 0xe8000000 0 0x00100000>; /* downstream I/O */
-
- pcie@1,0 {
- device_type = "pci";
- assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
- reg = <0x0800 0 0 0 0>;
- #address-cells = <3>;
- #size-cells = <2>;
- #interrupt-cells = <1>;
- ranges;
- interrupt-map-mask = <0 0 0 0>;
- interrupt-map = <0 0 0 0 &mpic 58>;
- marvell,pcie-port = <0>;
- marvell,pcie-lane = <0>;
- clocks = <&gateclk 5>;
- status = "disabled";
- };
-
- pcie@2,0 {
- device_type = "pci";
- assigned-addresses = <0x82002800 0 0x80000 0 0x2000>;
- reg = <0x1000 0 0 0 0>;
- #address-cells = <3>;
- #size-cells = <2>;
- #interrupt-cells = <1>;
- ranges;
- interrupt-map-mask = <0 0 0 0>;
- interrupt-map = <0 0 0 0 &mpic 62>;
- marvell,pcie-port = <1>;
- marvell,pcie-lane = <0>;
- clocks = <&gateclk 9>;
- status = "disabled";
- };
- };
};
};
};
diff --git a/arch/arm/boot/dts/armada-xp-axpwifiap.dts b/arch/arm/boot/dts/armada-xp-axpwifiap.dts
new file mode 100644
index 0000000..c5fe572
--- /dev/null
+++ b/arch/arm/boot/dts/armada-xp-axpwifiap.dts
@@ -0,0 +1,164 @@
+/*
+ * Device Tree file for Marvell RD-AXPWiFiAP.
+ *
+ * Note: this board is shipped with a new generation boot loader that
+ * remaps internal registers at 0xf1000000. Therefore, if earlyprintk
+ * is used, the CONFIG_DEBUG_MVEBU_UART_ALTERNATE option should be
+ * used.
+ *
+ * Copyright (C) 2013 Marvell
+ *
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+#include "armada-xp-mv78230.dtsi"
+
+/ {
+ model = "Marvell RD-AXPWiFiAP";
+ compatible = "marvell,rd-axpwifiap", "marvell,armadaxp-mv78230", "marvell,armadaxp", "marvell,armada-370-xp";
+
+ chosen {
+ bootargs = "console=ttyS0,115200 earlyprintk";
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0x00000000 0x00000000 0x00000000 0x40000000>; /* 1GB */
+ };
+
+ soc {
+ ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xf1000000 0x100000
+ MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000>;
+
+ pcie-controller {
+ status = "okay";
+
+ /* First mini-PCIe port */
+ pcie@1,0 {
+ /* Port 0, Lane 0 */
+ status = "okay";
+ };
+
+ /* Second mini-PCIe port */
+ pcie@2,0 {
+ /* Port 0, Lane 1 */
+ status = "okay";
+ };
+
+ /* Renesas uPD720202 USB 3.0 controller */
+ pcie@3,0 {
+ /* Port 0, Lane 3 */
+ status = "okay";
+ };
+ };
+
+ internal-regs {
+ pinctrl {
+ pinctrl-0 = <&pmx_phy_int>;
+ pinctrl-names = "default";
+
+ pmx_ge0: pmx-ge0 {
+ marvell,pins = "mpp0", "mpp1", "mpp2", "mpp3",
+ "mpp4", "mpp5", "mpp6", "mpp7",
+ "mpp8", "mpp9", "mpp10", "mpp11";
+ marvell,function = "ge0";
+ };
+
+ pmx_ge1: pmx-ge1 {
+ marvell,pins = "mpp12", "mpp13", "mpp14", "mpp15",
+ "mpp16", "mpp17", "mpp18", "mpp19",
+ "mpp20", "mpp21", "mpp22", "mpp23";
+ marvell,function = "ge1";
+ };
+
+ pmx_keys: pmx-keys {
+ marvell,pins = "mpp33";
+ marvell,function = "gpio";
+ };
+
+ pmx_spi: pmx-spi {
+ marvell,pins = "mpp36", "mpp37", "mpp38", "mpp39";
+ marvell,function = "spi";
+ };
+
+ pmx_phy_int: pmx-phy-int {
+ marvell,pins = "mpp32";
+ marvell,function = "gpio";
+ };
+ };
+
+ serial@12000 {
+ clock-frequency = <250000000>;
+ status = "okay";
+ };
+
+ serial@12100 {
+ clock-frequency = <250000000>;
+ status = "okay";
+ };
+
+ sata@a0000 {
+ nr-ports = <1>;
+ status = "okay";
+ };
+
+ mdio {
+ phy0: ethernet-phy@0 {
+ reg = <0>;
+ };
+
+ phy1: ethernet-phy@1 {
+ reg = <1>;
+ };
+ };
+
+ ethernet@70000 {
+ pinctrl-0 = <&pmx_ge0>;
+ pinctrl-names = "default";
+ status = "okay";
+ phy = <&phy0>;
+ phy-mode = "rgmii-id";
+ };
+ ethernet@74000 {
+ pinctrl-0 = <&pmx_ge1>;
+ pinctrl-names = "default";
+ status = "okay";
+ phy = <&phy1>;
+ phy-mode = "rgmii-id";
+ };
+
+ spi0: spi@10600 {
+ status = "okay";
+ pinctrl-0 = <&pmx_spi>;
+ pinctrl-names = "default";
+
+ spi-flash@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "n25q128a13";
+ reg = <0>; /* Chip select 0 */
+ spi-max-frequency = <108000000>;
+ };
+ };
+ };
+ };
+
+ gpio_keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-0 = <&pmx_keys>;
+ pinctrl-names = "default";
+
+ button@1 {
+ label = "Factory Reset Button";
+ linux,code = <141>; /* KEY_SETUP */
+ gpios = <&gpio1 1 1>;
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/armada-xp-db.dts b/arch/arm/boot/dts/armada-xp-db.dts
index e28e68f..bcf6d79 100644
--- a/arch/arm/boot/dts/armada-xp-db.dts
+++ b/arch/arm/boot/dts/armada-xp-db.dts
@@ -14,7 +14,7 @@
*/
/dts-v1/;
-/include/ "armada-xp-mv78460.dtsi"
+#include "armada-xp-mv78460.dtsi"
/ {
model = "Marvell Armada XP Evaluation Board";
@@ -30,9 +30,70 @@
};
soc {
- ranges = <0 0 0xd0000000 0x100000 /* Internal registers 1MiB */
- 0xe0000000 0 0xe0000000 0x8100000 /* PCIe */
- 0xf0000000 0 0xf0000000 0x1000000>; /* Device Bus, NOR 16MiB */
+ ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xd0000000 0x100000
+ MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000
+ MBUS_ID(0x01, 0x2f) 0 0 0xf0000000 0x1000000>;
+
+ devbus-bootcs {
+ status = "okay";
+
+ /* Device Bus parameters are required */
+
+ /* Read parameters */
+ devbus,bus-width = <8>;
+ devbus,turn-off-ps = <60000>;
+ devbus,badr-skew-ps = <0>;
+ devbus,acc-first-ps = <124000>;
+ devbus,acc-next-ps = <248000>;
+ devbus,rd-setup-ps = <0>;
+ devbus,rd-hold-ps = <0>;
+
+ /* Write parameters */
+ devbus,sync-enable = <0>;
+ devbus,wr-high-ps = <60000>;
+ devbus,wr-low-ps = <60000>;
+ devbus,ale-wr-ps = <60000>;
+
+ /* NOR 16 MiB */
+ nor@0 {
+ compatible = "cfi-flash";
+ reg = <0 0x1000000>;
+ bank-width = <2>;
+ };
+ };
+
+ pcie-controller {
+ status = "okay";
+
+ /*
+ * All 6 slots are physically present as
+ * standard PCIe slots on the board.
+ */
+ pcie@1,0 {
+ /* Port 0, Lane 0 */
+ status = "okay";
+ };
+ pcie@2,0 {
+ /* Port 0, Lane 1 */
+ status = "okay";
+ };
+ pcie@3,0 {
+ /* Port 0, Lane 2 */
+ status = "okay";
+ };
+ pcie@4,0 {
+ /* Port 0, Lane 3 */
+ status = "okay";
+ };
+ pcie@9,0 {
+ /* Port 2, Lane 0 */
+ status = "okay";
+ };
+ pcie@10,0 {
+ /* Port 3, Lane 0 */
+ status = "okay";
+ };
+ };
internal-regs {
serial@12000 {
@@ -127,68 +188,6 @@
spi-max-frequency = <20000000>;
};
};
-
- pcie-controller {
- status = "okay";
-
- /*
- * All 6 slots are physically present as
- * standard PCIe slots on the board.
- */
- pcie@1,0 {
- /* Port 0, Lane 0 */
- status = "okay";
- };
- pcie@2,0 {
- /* Port 0, Lane 1 */
- status = "okay";
- };
- pcie@3,0 {
- /* Port 0, Lane 2 */
- status = "okay";
- };
- pcie@4,0 {
- /* Port 0, Lane 3 */
- status = "okay";
- };
- pcie@9,0 {
- /* Port 2, Lane 0 */
- status = "okay";
- };
- pcie@10,0 {
- /* Port 3, Lane 0 */
- status = "okay";
- };
- };
-
- devbus-bootcs@10400 {
- status = "okay";
- ranges = <0 0xf0000000 0x1000000>;
-
- /* Device Bus parameters are required */
-
- /* Read parameters */
- devbus,bus-width = <8>;
- devbus,turn-off-ps = <60000>;
- devbus,badr-skew-ps = <0>;
- devbus,acc-first-ps = <124000>;
- devbus,acc-next-ps = <248000>;
- devbus,rd-setup-ps = <0>;
- devbus,rd-hold-ps = <0>;
-
- /* Write parameters */
- devbus,sync-enable = <0>;
- devbus,wr-high-ps = <60000>;
- devbus,wr-low-ps = <60000>;
- devbus,ale-wr-ps = <60000>;
-
- /* NOR 16 MiB */
- nor@0 {
- compatible = "cfi-flash";
- reg = <0 0x1000000>;
- bank-width = <2>;
- };
- };
};
};
};
diff --git a/arch/arm/boot/dts/armada-xp-gp.dts b/arch/arm/boot/dts/armada-xp-gp.dts
index c87b2de..2298e4a 100644
--- a/arch/arm/boot/dts/armada-xp-gp.dts
+++ b/arch/arm/boot/dts/armada-xp-gp.dts
@@ -14,7 +14,7 @@
*/
/dts-v1/;
-/include/ "armada-xp-mv78460.dtsi"
+#include "armada-xp-mv78460.dtsi"
/ {
model = "Marvell Armada XP Development Board DB-MV784MP-GP";
@@ -39,9 +39,58 @@
};
soc {
- ranges = <0 0 0xd0000000 0x100000 /* Internal registers 1MiB */
- 0xe0000000 0 0xe0000000 0x8100000 /* PCIe */
- 0xf0000000 0 0xf0000000 0x1000000 /* Device Bus, NOR 16MiB */>;
+ ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xd0000000 0x100000
+ MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000
+ MBUS_ID(0x01, 0x2f) 0 0 0xf0000000 0x1000000>;
+
+ devbus-bootcs {
+ status = "okay";
+
+ /* Device Bus parameters are required */
+
+ /* Read parameters */
+ devbus,bus-width = <8>;
+ devbus,turn-off-ps = <60000>;
+ devbus,badr-skew-ps = <0>;
+ devbus,acc-first-ps = <124000>;
+ devbus,acc-next-ps = <248000>;
+ devbus,rd-setup-ps = <0>;
+ devbus,rd-hold-ps = <0>;
+
+ /* Write parameters */
+ devbus,sync-enable = <0>;
+ devbus,wr-high-ps = <60000>;
+ devbus,wr-low-ps = <60000>;
+ devbus,ale-wr-ps = <60000>;
+
+ /* NOR 16 MiB */
+ nor@0 {
+ compatible = "cfi-flash";
+ reg = <0 0x1000000>;
+ bank-width = <2>;
+ };
+ };
+
+ pcie-controller {
+ status = "okay";
+
+ /*
+ * The 3 slots are physically present as
+ * standard PCIe slots on the board.
+ */
+ pcie@1,0 {
+ /* Port 0, Lane 0 */
+ status = "okay";
+ };
+ pcie@9,0 {
+ /* Port 2, Lane 0 */
+ status = "okay";
+ };
+ pcie@10,0 {
+ /* Port 3, Lane 0 */
+ status = "okay";
+ };
+ };
internal-regs {
serial@12000 {
@@ -126,56 +175,6 @@
spi-max-frequency = <108000000>;
};
};
-
- devbus-bootcs@10400 {
- status = "okay";
- ranges = <0 0xf0000000 0x1000000>; /* @addr 0xf000000, size 0x1000000 */
-
- /* Device Bus parameters are required */
-
- /* Read parameters */
- devbus,bus-width = <8>;
- devbus,turn-off-ps = <60000>;
- devbus,badr-skew-ps = <0>;
- devbus,acc-first-ps = <124000>;
- devbus,acc-next-ps = <248000>;
- devbus,rd-setup-ps = <0>;
- devbus,rd-hold-ps = <0>;
-
- /* Write parameters */
- devbus,sync-enable = <0>;
- devbus,wr-high-ps = <60000>;
- devbus,wr-low-ps = <60000>;
- devbus,ale-wr-ps = <60000>;
-
- /* NOR 16 MiB */
- nor@0 {
- compatible = "cfi-flash";
- reg = <0 0x1000000>;
- bank-width = <2>;
- };
- };
-
- pcie-controller {
- status = "okay";
-
- /*
- * The 3 slots are physically present as
- * standard PCIe slots on the board.
- */
- pcie@1,0 {
- /* Port 0, Lane 0 */
- status = "okay";
- };
- pcie@9,0 {
- /* Port 2, Lane 0 */
- status = "okay";
- };
- pcie@10,0 {
- /* Port 3, Lane 0 */
- status = "okay";
- };
- };
};
};
};
diff --git a/arch/arm/boot/dts/armada-xp-mv78230.dtsi b/arch/arm/boot/dts/armada-xp-mv78230.dtsi
index f8eaa38..0358a33 100644
--- a/arch/arm/boot/dts/armada-xp-mv78230.dtsi
+++ b/arch/arm/boot/dts/armada-xp-mv78230.dtsi
@@ -13,7 +13,7 @@
* common to all Armada XP SoCs.
*/
-/include/ "armada-xp.dtsi"
+#include "armada-xp.dtsi"
/ {
model = "Marvell Armada XP MV78230 SoC";
@@ -44,6 +44,124 @@
};
soc {
+ /*
+ * MV78230 has 2 PCIe units Gen2.0: One unit can be
+ * configured as x4 or quad x1 lanes. One unit is
+ * x4/x1.
+ */
+ pcie-controller {
+ compatible = "marvell,armada-xp-pcie";
+ status = "disabled";
+ device_type = "pci";
+
+ #address-cells = <3>;
+ #size-cells = <2>;
+
+ bus-range = <0x00 0xff>;
+
+ ranges =
+ <0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000 /* Port 0.0 registers */
+ 0x82000000 0 0x42000 MBUS_ID(0xf0, 0x01) 0x42000 0 0x00002000 /* Port 2.0 registers */
+ 0x82000000 0 0x44000 MBUS_ID(0xf0, 0x01) 0x44000 0 0x00002000 /* Port 0.1 registers */
+ 0x82000000 0 0x48000 MBUS_ID(0xf0, 0x01) 0x48000 0 0x00002000 /* Port 0.2 registers */
+ 0x82000000 0 0x4c000 MBUS_ID(0xf0, 0x01) 0x4c000 0 0x00002000 /* Port 0.3 registers */
+ 0x82000000 0x1 0 MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 0.0 MEM */
+ 0x81000000 0x1 0 MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 0.0 IO */
+ 0x82000000 0x2 0 MBUS_ID(0x04, 0xd8) 0 1 0 /* Port 0.1 MEM */
+ 0x81000000 0x2 0 MBUS_ID(0x04, 0xd0) 0 1 0 /* Port 0.1 IO */
+ 0x82000000 0x3 0 MBUS_ID(0x04, 0xb8) 0 1 0 /* Port 0.2 MEM */
+ 0x81000000 0x3 0 MBUS_ID(0x04, 0xb0) 0 1 0 /* Port 0.2 IO */
+ 0x82000000 0x4 0 MBUS_ID(0x04, 0x78) 0 1 0 /* Port 0.3 MEM */
+ 0x81000000 0x4 0 MBUS_ID(0x04, 0x70) 0 1 0 /* Port 0.3 IO */
+ 0x82000000 0x9 0 MBUS_ID(0x04, 0xf8) 0 1 0 /* Port 2.0 MEM */
+ 0x81000000 0x9 0 MBUS_ID(0x04, 0xf0) 0 1 0 /* Port 2.0 IO */>;
+
+ pcie@1,0 {
+ device_type = "pci";
+ assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
+ reg = <0x0800 0 0 0 0>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+ ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
+ 0x81000000 0 0 0x81000000 0x1 0 1 0>;
+ interrupt-map-mask = <0 0 0 0>;
+ interrupt-map = <0 0 0 0 &mpic 58>;
+ marvell,pcie-port = <0>;
+ marvell,pcie-lane = <0>;
+ clocks = <&gateclk 5>;
+ status = "disabled";
+ };
+
+ pcie@2,0 {
+ device_type = "pci";
+ assigned-addresses = <0x82000800 0 0x44000 0 0x2000>;
+ reg = <0x1000 0 0 0 0>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+ ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
+ 0x81000000 0 0 0x81000000 0x2 0 1 0>;
+ interrupt-map-mask = <0 0 0 0>;
+ interrupt-map = <0 0 0 0 &mpic 59>;
+ marvell,pcie-port = <0>;
+ marvell,pcie-lane = <1>;
+ clocks = <&gateclk 6>;
+ status = "disabled";
+ };
+
+ pcie@3,0 {
+ device_type = "pci";
+ assigned-addresses = <0x82000800 0 0x48000 0 0x2000>;
+ reg = <0x1800 0 0 0 0>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+ ranges = <0x82000000 0 0 0x82000000 0x3 0 1 0
+ 0x81000000 0 0 0x81000000 0x3 0 1 0>;
+ interrupt-map-mask = <0 0 0 0>;
+ interrupt-map = <0 0 0 0 &mpic 60>;
+ marvell,pcie-port = <0>;
+ marvell,pcie-lane = <2>;
+ clocks = <&gateclk 7>;
+ status = "disabled";
+ };
+
+ pcie@4,0 {
+ device_type = "pci";
+ assigned-addresses = <0x82000800 0 0x4c000 0 0x2000>;
+ reg = <0x2000 0 0 0 0>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+ ranges = <0x82000000 0 0 0x82000000 0x4 0 1 0
+ 0x81000000 0 0 0x81000000 0x4 0 1 0>;
+ interrupt-map-mask = <0 0 0 0>;
+ interrupt-map = <0 0 0 0 &mpic 61>;
+ marvell,pcie-port = <0>;
+ marvell,pcie-lane = <3>;
+ clocks = <&gateclk 8>;
+ status = "disabled";
+ };
+
+ pcie@9,0 {
+ device_type = "pci";
+ assigned-addresses = <0x82000800 0 0x42000 0 0x2000>;
+ reg = <0x4800 0 0 0 0>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+ ranges = <0x82000000 0 0 0x82000000 0x9 0 1 0
+ 0x81000000 0 0 0x81000000 0x9 0 1 0>;
+ interrupt-map-mask = <0 0 0 0>;
+ interrupt-map = <0 0 0 0 &mpic 99>;
+ marvell,pcie-port = <2>;
+ marvell,pcie-lane = <0>;
+ clocks = <&gateclk 26>;
+ status = "disabled";
+ };
+ };
+
internal-regs {
pinctrl {
compatible = "marvell,mv78230-pinctrl";
@@ -63,7 +181,7 @@
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
- #interrupts-cells = <2>;
+ #interrupt-cells = <2>;
interrupts = <82>, <83>, <84>, <85>;
};
@@ -74,113 +192,9 @@
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
- #interrupts-cells = <2>;
+ #interrupt-cells = <2>;
interrupts = <87>, <88>, <89>;
};
-
- /*
- * MV78230 has 2 PCIe units Gen2.0: One unit can be
- * configured as x4 or quad x1 lanes. One unit is
- * x4/x1.
- */
- pcie-controller {
- compatible = "marvell,armada-xp-pcie";
- status = "disabled";
- device_type = "pci";
-
-#address-cells = <3>;
-#size-cells = <2>;
-
- bus-range = <0x00 0xff>;
-
- ranges = <0x82000000 0 0x40000 0x40000 0 0x00002000 /* Port 0.0 registers */
- 0x82000000 0 0x42000 0x42000 0 0x00002000 /* Port 2.0 registers */
- 0x82000000 0 0x44000 0x44000 0 0x00002000 /* Port 0.1 registers */
- 0x82000000 0 0x48000 0x48000 0 0x00002000 /* Port 0.2 registers */
- 0x82000000 0 0x4c000 0x4c000 0 0x00002000 /* Port 0.3 registers */
- 0x82000000 0 0xe0000000 0xe0000000 0 0x08000000 /* non-prefetchable memory */
- 0x81000000 0 0 0xe8000000 0 0x00100000>; /* downstream I/O */
-
- pcie@1,0 {
- device_type = "pci";
- assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
- reg = <0x0800 0 0 0 0>;
- #address-cells = <3>;
- #size-cells = <2>;
- #interrupt-cells = <1>;
- ranges;
- interrupt-map-mask = <0 0 0 0>;
- interrupt-map = <0 0 0 0 &mpic 58>;
- marvell,pcie-port = <0>;
- marvell,pcie-lane = <0>;
- clocks = <&gateclk 5>;
- status = "disabled";
- };
-
- pcie@2,0 {
- device_type = "pci";
- assigned-addresses = <0x82000800 0 0x44000 0 0x2000>;
- reg = <0x1000 0 0 0 0>;
- #address-cells = <3>;
- #size-cells = <2>;
- #interrupt-cells = <1>;
- ranges;
- interrupt-map-mask = <0 0 0 0>;
- interrupt-map = <0 0 0 0 &mpic 59>;
- marvell,pcie-port = <0>;
- marvell,pcie-lane = <1>;
- clocks = <&gateclk 6>;
- status = "disabled";
- };
-
- pcie@3,0 {
- device_type = "pci";
- assigned-addresses = <0x82000800 0 0x48000 0 0x2000>;
- reg = <0x1800 0 0 0 0>;
- #address-cells = <3>;
- #size-cells = <2>;
- #interrupt-cells = <1>;
- ranges;
- interrupt-map-mask = <0 0 0 0>;
- interrupt-map = <0 0 0 0 &mpic 60>;
- marvell,pcie-port = <0>;
- marvell,pcie-lane = <2>;
- clocks = <&gateclk 7>;
- status = "disabled";
- };
-
- pcie@4,0 {
- device_type = "pci";
- assigned-addresses = <0x82000800 0 0x4c000 0 0x2000>;
- reg = <0x2000 0 0 0 0>;
- #address-cells = <3>;
- #size-cells = <2>;
- #interrupt-cells = <1>;
- ranges;
- interrupt-map-mask = <0 0 0 0>;
- interrupt-map = <0 0 0 0 &mpic 61>;
- marvell,pcie-port = <0>;
- marvell,pcie-lane = <3>;
- clocks = <&gateclk 8>;
- status = "disabled";
- };
-
- pcie@9,0 {
- device_type = "pci";
- assigned-addresses = <0x82000800 0 0x42000 0 0x2000>;
- reg = <0x4800 0 0 0 0>;
- #address-cells = <3>;
- #size-cells = <2>;
- #interrupt-cells = <1>;
- ranges;
- interrupt-map-mask = <0 0 0 0>;
- interrupt-map = <0 0 0 0 &mpic 99>;
- marvell,pcie-port = <2>;
- marvell,pcie-lane = <0>;
- clocks = <&gateclk 26>;
- status = "disabled";
- };
- };
};
};
};
diff --git a/arch/arm/boot/dts/armada-xp-mv78260.dtsi b/arch/arm/boot/dts/armada-xp-mv78260.dtsi
index 2d9335d..0e82c50 100644
--- a/arch/arm/boot/dts/armada-xp-mv78260.dtsi
+++ b/arch/arm/boot/dts/armada-xp-mv78260.dtsi
@@ -13,7 +13,7 @@
* common to all Armada XP SoCs.
*/
-/include/ "armada-xp.dtsi"
+#include "armada-xp.dtsi"
/ {
model = "Marvell Armada XP MV78260 SoC";
@@ -45,6 +45,145 @@
};
soc {
+ /*
+ * MV78260 has 3 PCIe units Gen2.0: Two units can be
+ * configured as x4 or quad x1 lanes. One unit is
+ * x4/x1.
+ */
+ pcie-controller {
+ compatible = "marvell,armada-xp-pcie";
+ status = "disabled";
+ device_type = "pci";
+
+ #address-cells = <3>;
+ #size-cells = <2>;
+
+ bus-range = <0x00 0xff>;
+
+ ranges =
+ <0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000 /* Port 0.0 registers */
+ 0x82000000 0 0x42000 MBUS_ID(0xf0, 0x01) 0x42000 0 0x00002000 /* Port 2.0 registers */
+ 0x82000000 0 0x44000 MBUS_ID(0xf0, 0x01) 0x44000 0 0x00002000 /* Port 0.1 registers */
+ 0x82000000 0 0x48000 MBUS_ID(0xf0, 0x01) 0x48000 0 0x00002000 /* Port 0.2 registers */
+ 0x82000000 0 0x4c000 MBUS_ID(0xf0, 0x01) 0x4c000 0 0x00002000 /* Port 0.3 registers */
+ 0x82000000 0 0x80000 MBUS_ID(0xf0, 0x01) 0x80000 0 0x00002000 /* Port 1.0 registers */
+ 0x82000000 0 0x82000 MBUS_ID(0xf0, 0x01) 0x82000 0 0x00002000 /* Port 3.0 registers */
+ 0x82000000 0x1 0 MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 0.0 MEM */
+ 0x81000000 0x1 0 MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 0.0 IO */
+ 0x82000000 0x2 0 MBUS_ID(0x04, 0xd8) 0 1 0 /* Port 0.1 MEM */
+ 0x81000000 0x2 0 MBUS_ID(0x04, 0xd0) 0 1 0 /* Port 0.1 IO */
+ 0x82000000 0x3 0 MBUS_ID(0x04, 0xb8) 0 1 0 /* Port 0.2 MEM */
+ 0x81000000 0x3 0 MBUS_ID(0x04, 0xb0) 0 1 0 /* Port 0.2 IO */
+ 0x82000000 0x4 0 MBUS_ID(0x04, 0x78) 0 1 0 /* Port 0.3 MEM */
+ 0x81000000 0x4 0 MBUS_ID(0x04, 0x70) 0 1 0 /* Port 0.3 IO */
+ 0x82000000 0x9 0 MBUS_ID(0x08, 0xe8) 0 1 0 /* Port 1.0 MEM */
+ 0x81000000 0x9 0 MBUS_ID(0x08, 0xe0) 0 1 0 /* Port 1.0 IO */
+ 0x82000000 0xa 0 MBUS_ID(0x08, 0xf8) 0 1 0 /* Port 3.0 MEM */
+ 0x81000000 0xa 0 MBUS_ID(0x08, 0xf0) 0 1 0 /* Port 3.0 IO */>;
+
+ pcie@1,0 {
+ device_type = "pci";
+ assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
+ reg = <0x0800 0 0 0 0>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+ ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
+ 0x81000000 0 0 0x81000000 0x1 0 1 0>;
+ interrupt-map-mask = <0 0 0 0>;
+ interrupt-map = <0 0 0 0 &mpic 58>;
+ marvell,pcie-port = <0>;
+ marvell,pcie-lane = <0>;
+ clocks = <&gateclk 5>;
+ status = "disabled";
+ };
+
+ pcie@2,0 {
+ device_type = "pci";
+ assigned-addresses = <0x82000800 0 0x44000 0 0x2000>;
+ reg = <0x1000 0 0 0 0>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+ ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
+ 0x81000000 0 0 0x81000000 0x2 0 1 0>;
+ interrupt-map-mask = <0 0 0 0>;
+ interrupt-map = <0 0 0 0 &mpic 59>;
+ marvell,pcie-port = <0>;
+ marvell,pcie-lane = <1>;
+ clocks = <&gateclk 6>;
+ status = "disabled";
+ };
+
+ pcie@3,0 {
+ device_type = "pci";
+ assigned-addresses = <0x82000800 0 0x48000 0 0x2000>;
+ reg = <0x1800 0 0 0 0>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+ ranges = <0x82000000 0 0 0x82000000 0x3 0 1 0
+ 0x81000000 0 0 0x81000000 0x3 0 1 0>;
+ interrupt-map-mask = <0 0 0 0>;
+ interrupt-map = <0 0 0 0 &mpic 60>;
+ marvell,pcie-port = <0>;
+ marvell,pcie-lane = <2>;
+ clocks = <&gateclk 7>;
+ status = "disabled";
+ };
+
+ pcie@4,0 {
+ device_type = "pci";
+ assigned-addresses = <0x82000800 0 0x4c000 0 0x2000>;
+ reg = <0x2000 0 0 0 0>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+ ranges = <0x82000000 0 0 0x82000000 0x4 0 1 0
+ 0x81000000 0 0 0x81000000 0x4 0 1 0>;
+ interrupt-map-mask = <0 0 0 0>;
+ interrupt-map = <0 0 0 0 &mpic 61>;
+ marvell,pcie-port = <0>;
+ marvell,pcie-lane = <3>;
+ clocks = <&gateclk 8>;
+ status = "disabled";
+ };
+
+ pcie@9,0 {
+ device_type = "pci";
+ assigned-addresses = <0x82000800 0 0x42000 0 0x2000>;
+ reg = <0x4800 0 0 0 0>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+ ranges = <0x82000000 0 0 0x82000000 0x9 0 1 0
+ 0x81000000 0 0 0x81000000 0x9 0 1 0>;
+ interrupt-map-mask = <0 0 0 0>;
+ interrupt-map = <0 0 0 0 &mpic 99>;
+ marvell,pcie-port = <2>;
+ marvell,pcie-lane = <0>;
+ clocks = <&gateclk 26>;
+ status = "disabled";
+ };
+
+ pcie@10,0 {
+ device_type = "pci";
+ assigned-addresses = <0x82000800 0 0x82000 0 0x2000>;
+ reg = <0x5000 0 0 0 0>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+ ranges = <0x82000000 0 0 0x82000000 0xa 0 1 0
+ 0x81000000 0 0 0x81000000 0xa 0 1 0>;
+ interrupt-map-mask = <0 0 0 0>;
+ interrupt-map = <0 0 0 0 &mpic 103>;
+ marvell,pcie-port = <3>;
+ marvell,pcie-lane = <0>;
+ clocks = <&gateclk 27>;
+ status = "disabled";
+ };
+ };
+
internal-regs {
pinctrl {
compatible = "marvell,mv78260-pinctrl";
@@ -64,7 +203,7 @@
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
- #interrupts-cells = <2>;
+ #interrupt-cells = <2>;
interrupts = <82>, <83>, <84>, <85>;
};
@@ -75,7 +214,7 @@
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
- #interrupts-cells = <2>;
+ #interrupt-cells = <2>;
interrupts = <87>, <88>, <89>, <90>;
};
@@ -86,7 +225,7 @@
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
- #interrupts-cells = <2>;
+ #interrupt-cells = <2>;
interrupts = <91>;
};
@@ -97,128 +236,6 @@
clocks = <&gateclk 1>;
status = "disabled";
};
-
- /*
- * MV78260 has 3 PCIe units Gen2.0: Two units can be
- * configured as x4 or quad x1 lanes. One unit is
- * x4/x1.
- */
- pcie-controller {
- compatible = "marvell,armada-xp-pcie";
- status = "disabled";
- device_type = "pci";
-
- #address-cells = <3>;
- #size-cells = <2>;
-
- bus-range = <0x00 0xff>;
-
- ranges = <0x82000000 0 0x40000 0x40000 0 0x00002000 /* Port 0.0 registers */
- 0x82000000 0 0x42000 0x42000 0 0x00002000 /* Port 2.0 registers */
- 0x82000000 0 0x44000 0x44000 0 0x00002000 /* Port 0.1 registers */
- 0x82000000 0 0x48000 0x48000 0 0x00002000 /* Port 0.2 registers */
- 0x82000000 0 0x4c000 0x4c000 0 0x00002000 /* Port 0.3 registers */
- 0x82000000 0 0x80000 0x80000 0 0x00002000 /* Port 1.0 registers */
- 0x82000000 0 0x82000 0x82000 0 0x00002000 /* Port 3.0 registers */
- 0x82000000 0 0xe0000000 0xe0000000 0 0x08000000 /* non-prefetchable memory */
- 0x81000000 0 0 0xe8000000 0 0x00100000>; /* downstream I/O */
-
- pcie@1,0 {
- device_type = "pci";
- assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
- reg = <0x0800 0 0 0 0>;
- #address-cells = <3>;
- #size-cells = <2>;
- #interrupt-cells = <1>;
- ranges;
- interrupt-map-mask = <0 0 0 0>;
- interrupt-map = <0 0 0 0 &mpic 58>;
- marvell,pcie-port = <0>;
- marvell,pcie-lane = <0>;
- clocks = <&gateclk 5>;
- status = "disabled";
- };
-
- pcie@2,0 {
- device_type = "pci";
- assigned-addresses = <0x82000800 0 0x44000 0 0x2000>;
- reg = <0x1000 0 0 0 0>;
- #address-cells = <3>;
- #size-cells = <2>;
- #interrupt-cells = <1>;
- ranges;
- interrupt-map-mask = <0 0 0 0>;
- interrupt-map = <0 0 0 0 &mpic 59>;
- marvell,pcie-port = <0>;
- marvell,pcie-lane = <1>;
- clocks = <&gateclk 6>;
- status = "disabled";
- };
-
- pcie@3,0 {
- device_type = "pci";
- assigned-addresses = <0x82000800 0 0x48000 0 0x2000>;
- reg = <0x1800 0 0 0 0>;
- #address-cells = <3>;
- #size-cells = <2>;
- #interrupt-cells = <1>;
- ranges;
- interrupt-map-mask = <0 0 0 0>;
- interrupt-map = <0 0 0 0 &mpic 60>;
- marvell,pcie-port = <0>;
- marvell,pcie-lane = <2>;
- clocks = <&gateclk 7>;
- status = "disabled";
- };
-
- pcie@4,0 {
- device_type = "pci";
- assigned-addresses = <0x82000800 0 0x4c000 0 0x2000>;
- reg = <0x2000 0 0 0 0>;
- #address-cells = <3>;
- #size-cells = <2>;
- #interrupt-cells = <1>;
- ranges;
- interrupt-map-mask = <0 0 0 0>;
- interrupt-map = <0 0 0 0 &mpic 61>;
- marvell,pcie-port = <0>;
- marvell,pcie-lane = <3>;
- clocks = <&gateclk 8>;
- status = "disabled";
- };
-
- pcie@9,0 {
- device_type = "pci";
- assigned-addresses = <0x82000800 0 0x42000 0 0x2000>;
- reg = <0x4800 0 0 0 0>;
- #address-cells = <3>;
- #size-cells = <2>;
- #interrupt-cells = <1>;
- ranges;
- interrupt-map-mask = <0 0 0 0>;
- interrupt-map = <0 0 0 0 &mpic 99>;
- marvell,pcie-port = <2>;
- marvell,pcie-lane = <0>;
- clocks = <&gateclk 26>;
- status = "disabled";
- };
-
- pcie@10,0 {
- device_type = "pci";
- assigned-addresses = <0x82000800 0 0x82000 0 0x2000>;
- reg = <0x5000 0 0 0 0>;
- #address-cells = <3>;
- #size-cells = <2>;
- #interrupt-cells = <1>;
- ranges;
- interrupt-map-mask = <0 0 0 0>;
- interrupt-map = <0 0 0 0 &mpic 103>;
- marvell,pcie-port = <3>;
- marvell,pcie-lane = <0>;
- clocks = <&gateclk 27>;
- status = "disabled";
- };
- };
};
};
};
diff --git a/arch/arm/boot/dts/armada-xp-mv78460.dtsi b/arch/arm/boot/dts/armada-xp-mv78460.dtsi
index c7b1f4d..e82c1b8 100644
--- a/arch/arm/boot/dts/armada-xp-mv78460.dtsi
+++ b/arch/arm/boot/dts/armada-xp-mv78460.dtsi
@@ -13,7 +13,7 @@
* common to all Armada XP SoCs.
*/
-/include/ "armada-xp.dtsi"
+#include "armada-xp.dtsi"
/ {
model = "Marvell Armada XP MV78460 SoC";
@@ -61,6 +61,227 @@
};
soc {
+ /*
+ * MV78460 has 4 PCIe units Gen2.0: Two units can be
+ * configured as x4 or quad x1 lanes. Two units are
+ * x4/x1.
+ */
+ pcie-controller {
+ compatible = "marvell,armada-xp-pcie";
+ status = "disabled";
+ device_type = "pci";
+
+ #address-cells = <3>;
+ #size-cells = <2>;
+
+ bus-range = <0x00 0xff>;
+
+ ranges =
+ <0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000 /* Port 0.0 registers */
+ 0x82000000 0 0x42000 MBUS_ID(0xf0, 0x01) 0x42000 0 0x00002000 /* Port 2.0 registers */
+ 0x82000000 0 0x44000 MBUS_ID(0xf0, 0x01) 0x44000 0 0x00002000 /* Port 0.1 registers */
+ 0x82000000 0 0x48000 MBUS_ID(0xf0, 0x01) 0x48000 0 0x00002000 /* Port 0.2 registers */
+ 0x82000000 0 0x4c000 MBUS_ID(0xf0, 0x01) 0x4c000 0 0x00002000 /* Port 0.3 registers */
+ 0x82000000 0 0x80000 MBUS_ID(0xf0, 0x01) 0x80000 0 0x00002000 /* Port 1.0 registers */
+ 0x82000000 0 0x82000 MBUS_ID(0xf0, 0x01) 0x82000 0 0x00002000 /* Port 3.0 registers */
+ 0x82000000 0 0x84000 MBUS_ID(0xf0, 0x01) 0x84000 0 0x00002000 /* Port 1.1 registers */
+ 0x82000000 0 0x88000 MBUS_ID(0xf0, 0x01) 0x88000 0 0x00002000 /* Port 1.2 registers */
+ 0x82000000 0 0x8c000 MBUS_ID(0xf0, 0x01) 0x8c000 0 0x00002000 /* Port 1.3 registers */
+ 0x82000000 0x1 0 MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 0.0 MEM */
+ 0x81000000 0x1 0 MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 0.0 IO */
+ 0x82000000 0x2 0 MBUS_ID(0x04, 0xd8) 0 1 0 /* Port 0.1 MEM */
+ 0x81000000 0x2 0 MBUS_ID(0x04, 0xd0) 0 1 0 /* Port 0.1 IO */
+ 0x82000000 0x3 0 MBUS_ID(0x04, 0xb8) 0 1 0 /* Port 0.2 MEM */
+ 0x81000000 0x3 0 MBUS_ID(0x04, 0xb0) 0 1 0 /* Port 0.2 IO */
+ 0x82000000 0x4 0 MBUS_ID(0x04, 0x78) 0 1 0 /* Port 0.3 MEM */
+ 0x81000000 0x4 0 MBUS_ID(0x04, 0x70) 0 1 0 /* Port 0.3 IO */
+
+ 0x82000000 0x5 0 MBUS_ID(0x08, 0xe8) 0 1 0 /* Port 1.0 MEM */
+ 0x81000000 0x5 0 MBUS_ID(0x08, 0xe0) 0 1 0 /* Port 1.0 IO */
+ 0x82000000 0x6 0 MBUS_ID(0x08, 0xd8) 0 1 0 /* Port 1.1 MEM */
+ 0x81000000 0x6 0 MBUS_ID(0x08, 0xd0) 0 1 0 /* Port 1.1 IO */
+ 0x82000000 0x7 0 MBUS_ID(0x08, 0xb8) 0 1 0 /* Port 1.2 MEM */
+ 0x81000000 0x7 0 MBUS_ID(0x08, 0xb0) 0 1 0 /* Port 1.2 IO */
+ 0x82000000 0x8 0 MBUS_ID(0x08, 0x78) 0 1 0 /* Port 1.3 MEM */
+ 0x81000000 0x8 0 MBUS_ID(0x08, 0x70) 0 1 0 /* Port 1.3 IO */
+
+ 0x82000000 0x9 0 MBUS_ID(0x04, 0xf8) 0 1 0 /* Port 2.0 MEM */
+ 0x81000000 0x9 0 MBUS_ID(0x04, 0xf0) 0 1 0 /* Port 2.0 IO */
+
+ 0x82000000 0xa 0 MBUS_ID(0x08, 0xf8) 0 1 0 /* Port 3.0 MEM */
+ 0x81000000 0xa 0 MBUS_ID(0x08, 0xf0) 0 1 0 /* Port 3.0 IO */>;
+
+ pcie@1,0 {
+ device_type = "pci";
+ assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
+ reg = <0x0800 0 0 0 0>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+ ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
+ 0x81000000 0 0 0x81000000 0x1 0 1 0>;
+ interrupt-map-mask = <0 0 0 0>;
+ interrupt-map = <0 0 0 0 &mpic 58>;
+ marvell,pcie-port = <0>;
+ marvell,pcie-lane = <0>;
+ clocks = <&gateclk 5>;
+ status = "disabled";
+ };
+
+ pcie@2,0 {
+ device_type = "pci";
+ assigned-addresses = <0x82001000 0 0x44000 0 0x2000>;
+ reg = <0x1000 0 0 0 0>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+ ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
+ 0x81000000 0 0 0x81000000 0x2 0 1 0>;
+ interrupt-map-mask = <0 0 0 0>;
+ interrupt-map = <0 0 0 0 &mpic 59>;
+ marvell,pcie-port = <0>;
+ marvell,pcie-lane = <1>;
+ clocks = <&gateclk 6>;
+ status = "disabled";
+ };
+
+ pcie@3,0 {
+ device_type = "pci";
+ assigned-addresses = <0x82001800 0 0x48000 0 0x2000>;
+ reg = <0x1800 0 0 0 0>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+ ranges = <0x82000000 0 0 0x82000000 0x3 0 1 0
+ 0x81000000 0 0 0x81000000 0x3 0 1 0>;
+ interrupt-map-mask = <0 0 0 0>;
+ interrupt-map = <0 0 0 0 &mpic 60>;
+ marvell,pcie-port = <0>;
+ marvell,pcie-lane = <2>;
+ clocks = <&gateclk 7>;
+ status = "disabled";
+ };
+
+ pcie@4,0 {
+ device_type = "pci";
+ assigned-addresses = <0x82002000 0 0x4c000 0 0x2000>;
+ reg = <0x2000 0 0 0 0>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+ ranges = <0x82000000 0 0 0x82000000 0x4 0 1 0
+ 0x81000000 0 0 0x81000000 0x4 0 1 0>;
+ interrupt-map-mask = <0 0 0 0>;
+ interrupt-map = <0 0 0 0 &mpic 61>;
+ marvell,pcie-port = <0>;
+ marvell,pcie-lane = <3>;
+ clocks = <&gateclk 8>;
+ status = "disabled";
+ };
+
+ pcie@5,0 {
+ device_type = "pci";
+ assigned-addresses = <0x82002800 0 0x80000 0 0x2000>;
+ reg = <0x2800 0 0 0 0>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+ ranges = <0x82000000 0 0 0x82000000 0x5 0 1 0
+ 0x81000000 0 0 0x81000000 0x5 0 1 0>;
+ interrupt-map-mask = <0 0 0 0>;
+ interrupt-map = <0 0 0 0 &mpic 62>;
+ marvell,pcie-port = <1>;
+ marvell,pcie-lane = <0>;
+ clocks = <&gateclk 9>;
+ status = "disabled";
+ };
+
+ pcie@6,0 {
+ device_type = "pci";
+ assigned-addresses = <0x82003000 0 0x84000 0 0x2000>;
+ reg = <0x3000 0 0 0 0>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+ ranges = <0x82000000 0 0 0x82000000 0x6 0 1 0
+ 0x81000000 0 0 0x81000000 0x6 0 1 0>;
+ interrupt-map-mask = <0 0 0 0>;
+ interrupt-map = <0 0 0 0 &mpic 63>;
+ marvell,pcie-port = <1>;
+ marvell,pcie-lane = <1>;
+ clocks = <&gateclk 10>;
+ status = "disabled";
+ };
+
+ pcie@7,0 {
+ device_type = "pci";
+ assigned-addresses = <0x82003800 0 0x88000 0 0x2000>;
+ reg = <0x3800 0 0 0 0>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+ ranges = <0x82000000 0 0 0x82000000 0x7 0 1 0
+ 0x81000000 0 0 0x81000000 0x7 0 1 0>;
+ interrupt-map-mask = <0 0 0 0>;
+ interrupt-map = <0 0 0 0 &mpic 64>;
+ marvell,pcie-port = <1>;
+ marvell,pcie-lane = <2>;
+ clocks = <&gateclk 11>;
+ status = "disabled";
+ };
+
+ pcie@8,0 {
+ device_type = "pci";
+ assigned-addresses = <0x82004000 0 0x8c000 0 0x2000>;
+ reg = <0x4000 0 0 0 0>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+ ranges = <0x82000000 0 0 0x82000000 0x8 0 1 0
+ 0x81000000 0 0 0x81000000 0x8 0 1 0>;
+ interrupt-map-mask = <0 0 0 0>;
+ interrupt-map = <0 0 0 0 &mpic 65>;
+ marvell,pcie-port = <1>;
+ marvell,pcie-lane = <3>;
+ clocks = <&gateclk 12>;
+ status = "disabled";
+ };
+
+ pcie@9,0 {
+ device_type = "pci";
+ assigned-addresses = <0x82004800 0 0x42000 0 0x2000>;
+ reg = <0x4800 0 0 0 0>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+ ranges = <0x82000000 0 0 0x82000000 0x9 0 1 0
+ 0x81000000 0 0 0x81000000 0x9 0 1 0>;
+ interrupt-map-mask = <0 0 0 0>;
+ interrupt-map = <0 0 0 0 &mpic 99>;
+ marvell,pcie-port = <2>;
+ marvell,pcie-lane = <0>;
+ clocks = <&gateclk 26>;
+ status = "disabled";
+ };
+
+ pcie@10,0 {
+ device_type = "pci";
+ assigned-addresses = <0x82005000 0 0x82000 0 0x2000>;
+ reg = <0x5000 0 0 0 0>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+ ranges = <0x82000000 0 0 0x82000000 0xa 0 1 0
+ 0x81000000 0 0 0x81000000 0xa 0 1 0>;
+ interrupt-map-mask = <0 0 0 0>;
+ interrupt-map = <0 0 0 0 &mpic 103>;
+ marvell,pcie-port = <3>;
+ marvell,pcie-lane = <0>;
+ clocks = <&gateclk 27>;
+ status = "disabled";
+ };
+ };
+
internal-regs {
pinctrl {
compatible = "marvell,mv78460-pinctrl";
@@ -80,7 +301,7 @@
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
- #interrupts-cells = <2>;
+ #interrupt-cells = <2>;
interrupts = <82>, <83>, <84>, <85>;
};
@@ -91,7 +312,7 @@
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
- #interrupts-cells = <2>;
+ #interrupt-cells = <2>;
interrupts = <87>, <88>, <89>, <90>;
};
@@ -102,7 +323,7 @@
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
- #interrupts-cells = <2>;
+ #interrupt-cells = <2>;
interrupts = <91>;
};
@@ -113,194 +334,6 @@
clocks = <&gateclk 1>;
status = "disabled";
};
-
- /*
- * MV78460 has 4 PCIe units Gen2.0: Two units can be
- * configured as x4 or quad x1 lanes. Two units are
- * x4/x1.
- */
- pcie-controller {
- compatible = "marvell,armada-xp-pcie";
- status = "disabled";
- device_type = "pci";
-
- #address-cells = <3>;
- #size-cells = <2>;
-
- bus-range = <0x00 0xff>;
-
- ranges = <0x82000000 0 0x40000 0x40000 0 0x00002000 /* Port 0.0 registers */
- 0x82000000 0 0x42000 0x42000 0 0x00002000 /* Port 2.0 registers */
- 0x82000000 0 0x44000 0x44000 0 0x00002000 /* Port 0.1 registers */
- 0x82000000 0 0x48000 0x48000 0 0x00002000 /* Port 0.2 registers */
- 0x82000000 0 0x4c000 0x4c000 0 0x00002000 /* Port 0.3 registers */
- 0x82000000 0 0x80000 0x80000 0 0x00002000 /* Port 1.0 registers */
- 0x82000000 0 0x82000 0x82000 0 0x00002000 /* Port 3.0 registers */
- 0x82000000 0 0x84000 0x84000 0 0x00002000 /* Port 1.1 registers */
- 0x82000000 0 0x88000 0x88000 0 0x00002000 /* Port 1.2 registers */
- 0x82000000 0 0x8c000 0x8c000 0 0x00002000 /* Port 1.3 registers */
- 0x82000000 0 0xe0000000 0xe0000000 0 0x08000000 /* non-prefetchable memory */
- 0x81000000 0 0 0xe8000000 0 0x00100000>; /* downstream I/O */
-
- pcie@1,0 {
- device_type = "pci";
- assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
- reg = <0x0800 0 0 0 0>;
- #address-cells = <3>;
- #size-cells = <2>;
- #interrupt-cells = <1>;
- ranges;
- interrupt-map-mask = <0 0 0 0>;
- interrupt-map = <0 0 0 0 &mpic 58>;
- marvell,pcie-port = <0>;
- marvell,pcie-lane = <0>;
- clocks = <&gateclk 5>;
- status = "disabled";
- };
-
- pcie@2,0 {
- device_type = "pci";
- assigned-addresses = <0x82001000 0 0x44000 0 0x2000>;
- reg = <0x1000 0 0 0 0>;
- #address-cells = <3>;
- #size-cells = <2>;
- #interrupt-cells = <1>;
- ranges;
- interrupt-map-mask = <0 0 0 0>;
- interrupt-map = <0 0 0 0 &mpic 59>;
- marvell,pcie-port = <0>;
- marvell,pcie-lane = <1>;
- clocks = <&gateclk 6>;
- status = "disabled";
- };
-
- pcie@3,0 {
- device_type = "pci";
- assigned-addresses = <0x82001800 0 0x48000 0 0x2000>;
- reg = <0x1800 0 0 0 0>;
- #address-cells = <3>;
- #size-cells = <2>;
- #interrupt-cells = <1>;
- ranges;
- interrupt-map-mask = <0 0 0 0>;
- interrupt-map = <0 0 0 0 &mpic 60>;
- marvell,pcie-port = <0>;
- marvell,pcie-lane = <2>;
- clocks = <&gateclk 7>;
- status = "disabled";
- };
-
- pcie@4,0 {
- device_type = "pci";
- assigned-addresses = <0x82002000 0 0x4c000 0 0x2000>;
- reg = <0x2000 0 0 0 0>;
- #address-cells = <3>;
- #size-cells = <2>;
- #interrupt-cells = <1>;
- ranges;
- interrupt-map-mask = <0 0 0 0>;
- interrupt-map = <0 0 0 0 &mpic 61>;
- marvell,pcie-port = <0>;
- marvell,pcie-lane = <3>;
- clocks = <&gateclk 8>;
- status = "disabled";
- };
-
- pcie@5,0 {
- device_type = "pci";
- assigned-addresses = <0x82002800 0 0x80000 0 0x2000>;
- reg = <0x2800 0 0 0 0>;
- #address-cells = <3>;
- #size-cells = <2>;
- #interrupt-cells = <1>;
- ranges;
- interrupt-map-mask = <0 0 0 0>;
- interrupt-map = <0 0 0 0 &mpic 62>;
- marvell,pcie-port = <1>;
- marvell,pcie-lane = <0>;
- clocks = <&gateclk 9>;
- status = "disabled";
- };
-
- pcie@6,0 {
- device_type = "pci";
- assigned-addresses = <0x82003000 0 0x84000 0 0x2000>;
- reg = <0x3000 0 0 0 0>;
- #address-cells = <3>;
- #size-cells = <2>;
- #interrupt-cells = <1>;
- ranges;
- interrupt-map-mask = <0 0 0 0>;
- interrupt-map = <0 0 0 0 &mpic 63>;
- marvell,pcie-port = <1>;
- marvell,pcie-lane = <1>;
- clocks = <&gateclk 10>;
- status = "disabled";
- };
-
- pcie@7,0 {
- device_type = "pci";
- assigned-addresses = <0x82003800 0 0x88000 0 0x2000>;
- reg = <0x3800 0 0 0 0>;
- #address-cells = <3>;
- #size-cells = <2>;
- #interrupt-cells = <1>;
- ranges;
- interrupt-map-mask = <0 0 0 0>;
- interrupt-map = <0 0 0 0 &mpic 64>;
- marvell,pcie-port = <1>;
- marvell,pcie-lane = <2>;
- clocks = <&gateclk 11>;
- status = "disabled";
- };
-
- pcie@8,0 {
- device_type = "pci";
- assigned-addresses = <0x82004000 0 0x8c000 0 0x2000>;
- reg = <0x4000 0 0 0 0>;
- #address-cells = <3>;
- #size-cells = <2>;
- #interrupt-cells = <1>;
- ranges;
- interrupt-map-mask = <0 0 0 0>;
- interrupt-map = <0 0 0 0 &mpic 65>;
- marvell,pcie-port = <1>;
- marvell,pcie-lane = <3>;
- clocks = <&gateclk 12>;
- status = "disabled";
- };
- pcie@9,0 {
- device_type = "pci";
- assigned-addresses = <0x82004800 0 0x42000 0 0x2000>;
- reg = <0x4800 0 0 0 0>;
- #address-cells = <3>;
- #size-cells = <2>;
- #interrupt-cells = <1>;
- ranges;
- interrupt-map-mask = <0 0 0 0>;
- interrupt-map = <0 0 0 0 &mpic 99>;
- marvell,pcie-port = <2>;
- marvell,pcie-lane = <0>;
- clocks = <&gateclk 26>;
- status = "disabled";
- };
-
- pcie@10,0 {
- device_type = "pci";
- assigned-addresses = <0x82005000 0 0x82000 0 0x2000>;
- reg = <0x5000 0 0 0 0>;
- #address-cells = <3>;
- #size-cells = <2>;
- #interrupt-cells = <1>;
- ranges;
- interrupt-map-mask = <0 0 0 0>;
- interrupt-map = <0 0 0 0 &mpic 103>;
- marvell,pcie-port = <3>;
- marvell,pcie-lane = <0>;
- clocks = <&gateclk 27>;
- status = "disabled";
- };
- };
};
};
};
diff --git a/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts b/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts
index 8f51045..5695afc 100644
--- a/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts
+++ b/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts
@@ -11,7 +11,7 @@
*/
/dts-v1/;
-/include/ "armada-xp-mv78260.dtsi"
+#include "armada-xp-mv78260.dtsi"
/ {
model = "PlatHome OpenBlocks AX3-4 board";
@@ -27,9 +27,46 @@
};
soc {
- ranges = <0 0 0xd0000000 0x100000 /* Internal registers 1MiB */
- 0xe0000000 0 0xe0000000 0x8100000 /* PCIe */
- 0xf0000000 0 0xf0000000 0x8000000 /* Device Bus, NOR 128MiB */>;
+ ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xd0000000 0x100000
+ MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000
+ MBUS_ID(0x01, 0x2f) 0 0 0xf0000000 0x8000000>;
+
+ devbus-bootcs {
+ status = "okay";
+
+ /* Device Bus parameters are required */
+
+ /* Read parameters */
+ devbus,bus-width = <8>;
+ devbus,turn-off-ps = <60000>;
+ devbus,badr-skew-ps = <0>;
+ devbus,acc-first-ps = <124000>;
+ devbus,acc-next-ps = <248000>;
+ devbus,rd-setup-ps = <0>;
+ devbus,rd-hold-ps = <0>;
+
+ /* Write parameters */
+ devbus,sync-enable = <0>;
+ devbus,wr-high-ps = <60000>;
+ devbus,wr-low-ps = <60000>;
+ devbus,ale-wr-ps = <60000>;
+
+ /* NOR 128 MiB */
+ nor@0 {
+ compatible = "cfi-flash";
+ reg = <0 0x8000000>;
+ bank-width = <2>;
+ };
+ };
+
+ pcie-controller {
+ status = "okay";
+ /* Internal mini-PCIe connector */
+ pcie@1,0 {
+ /* Port 0, Lane 0 */
+ status = "okay";
+ };
+ };
internal-regs {
serial@12000 {
@@ -148,49 +185,6 @@
usb@51000 {
status = "okay";
};
-
- /* USB interface in the mini-PCIe connector */
- usb@52000 {
- status = "okay";
- };
-
- devbus-bootcs@10400 {
- status = "okay";
- ranges = <0 0xf0000000 0x8000000>; /* @addr 0xf000000, size 0x8000000 */
-
- /* Device Bus parameters are required */
-
- /* Read parameters */
- devbus,bus-width = <8>;
- devbus,turn-off-ps = <60000>;
- devbus,badr-skew-ps = <0>;
- devbus,acc-first-ps = <124000>;
- devbus,acc-next-ps = <248000>;
- devbus,rd-setup-ps = <0>;
- devbus,rd-hold-ps = <0>;
-
- /* Write parameters */
- devbus,sync-enable = <0>;
- devbus,wr-high-ps = <60000>;
- devbus,wr-low-ps = <60000>;
- devbus,ale-wr-ps = <60000>;
-
- /* NOR 128 MiB */
- nor@0 {
- compatible = "cfi-flash";
- reg = <0 0x8000000>;
- bank-width = <2>;
- };
- };
-
- pcie-controller {
- status = "okay";
- /* Internal mini-PCIe connector */
- pcie@1,0 {
- /* Port 0, Lane 0 */
- status = "okay";
- };
- };
};
};
};
diff --git a/arch/arm/boot/dts/armada-xp.dtsi b/arch/arm/boot/dts/armada-xp.dtsi
index 416eb94..def125c 100644
--- a/arch/arm/boot/dts/armada-xp.dtsi
+++ b/arch/arm/boot/dts/armada-xp.dtsi
@@ -16,7 +16,7 @@
* common to all Armada SoCs.
*/
-/include/ "armada-370-xp.dtsi"
+#include "armada-370-xp.dtsi"
/ {
model = "Marvell Armada XP family SoC";
@@ -27,6 +27,13 @@
};
soc {
+ compatible = "marvell,armadaxp-mbus", "simple-bus";
+
+ bootrom {
+ compatible = "marvell,bootrom";
+ reg = <MBUS_ID(0x01, 0x1d) 0 0x100000>;
+ };
+
internal-regs {
L2: l2-cache {
compatible = "marvell,aurora-system-cache";
@@ -62,7 +69,7 @@
};
timer@20300 {
- marvell,timer-25Mhz;
+ compatible = "marvell,armada-xp-timer";
};
coreclk: mvebu-sar@18230 {
diff --git a/arch/arm/boot/dts/da850-evm.dts b/arch/arm/boot/dts/da850-evm.dts
index 5bce7cc..588ce58 100644
--- a/arch/arm/boot/dts/da850-evm.dts
+++ b/arch/arm/boot/dts/da850-evm.dts
@@ -90,6 +90,17 @@
};
};
};
+ mdio: mdio@1e24000 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&mdio_pins>;
+ bus_freq = <2200000>;
+ };
+ eth0: ethernet@1e20000 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&mii_pins>;
+ };
};
nand_cs3@62000000 {
status = "okay";
diff --git a/arch/arm/boot/dts/da850.dtsi b/arch/arm/boot/dts/da850.dtsi
index d70ba55..8d17346 100644
--- a/arch/arm/boot/dts/da850.dtsi
+++ b/arch/arm/boot/dts/da850.dtsi
@@ -125,11 +125,33 @@
0x14 0x00000010 0x000000f0
>;
};
+ mdio_pins: pinmux_mdio_pins {
+ pinctrl-single,bits = <
+ /* MDIO_CLK, MDIO_D */
+ 0x10 0x00000088 0x000000ff
+ >;
+ };
+ mii_pins: pinmux_mii_pins {
+ pinctrl-single,bits = <
+ /*
+ * MII_TXEN, MII_TXCLK, MII_COL
+ * MII_TXD_3, MII_TXD_2, MII_TXD_1
+ * MII_TXD_0
+ */
+ 0x8 0x88888880 0xfffffff0
+ /*
+ * MII_RXER, MII_CRS, MII_RXCLK
+ * MII_RXDV, MII_RXD_3, MII_RXD_2
+ * MII_RXD_1, MII_RXD_0
+ */
+ 0xc 0x88888888 0xffffffff
+ >;
+ };
+
};
serial0: serial@1c42000 {
compatible = "ns16550a";
reg = <0x42000 0x100>;
- clock-frequency = <150000000>;
reg-shift = <2>;
interrupts = <25>;
status = "disabled";
@@ -137,7 +159,6 @@
serial1: serial@1d0c000 {
compatible = "ns16550a";
reg = <0x10c000 0x100>;
- clock-frequency = <150000000>;
reg-shift = <2>;
interrupts = <53>;
status = "disabled";
@@ -145,7 +166,6 @@
serial2: serial@1d0d000 {
compatible = "ns16550a";
reg = <0x10d000 0x100>;
- clock-frequency = <150000000>;
reg-shift = <2>;
interrupts = <61>;
status = "disabled";
@@ -216,6 +236,26 @@
interrupts = <56>;
status = "disabled";
};
+ mdio: mdio@1e24000 {
+ compatible = "ti,davinci_mdio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x224000 0x1000>;
+ };
+ eth0: ethernet@1e20000 {
+ compatible = "ti,davinci-dm6467-emac";
+ reg = <0x220000 0x4000>;
+ ti,davinci-ctrl-reg-offset = <0x3000>;
+ ti,davinci-ctrl-mod-reg-offset = <0x2000>;
+ ti,davinci-ctrl-ram-offset = <0>;
+ ti,davinci-ctrl-ram-size = <0x2000>;
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ interrupts = <33
+ 34
+ 35
+ 36
+ >;
+ };
};
nand_cs3@62000000 {
compatible = "ti,davinci-nand";
diff --git a/arch/arm/boot/dts/imx25.dtsi b/arch/arm/boot/dts/imx25.dtsi
index 7011539..737ed5d 100644
--- a/arch/arm/boot/dts/imx25.dtsi
+++ b/arch/arm/boot/dts/imx25.dtsi
@@ -13,19 +13,35 @@
/ {
aliases {
+ gpio0 = &gpio1;
+ gpio1 = &gpio2;
+ gpio2 = &gpio3;
+ gpio3 = &gpio4;
+ i2c0 = &i2c1;
+ i2c1 = &i2c2;
+ i2c2 = &i2c3;
serial0 = &uart1;
serial1 = &uart2;
serial2 = &uart3;
serial3 = &uart4;
serial4 = &uart5;
- gpio0 = &gpio1;
- gpio1 = &gpio2;
- gpio2 = &gpio3;
- gpio3 = &gpio4;
+ spi0 = &spi1;
+ spi1 = &spi2;
+ spi2 = &spi3;
usb0 = &usbotg;
usb1 = &usbhost1;
};
+ cpus {
+ #address-cells = <0>;
+ #size-cells = <0>;
+
+ cpu {
+ compatible = "arm,arm926ej-s";
+ device_type = "cpu";
+ };
+ };
+
asic: asic-interrupt-controller@68000000 {
compatible = "fsl,imx25-asic", "fsl,avic";
interrupt-controller;
@@ -377,7 +393,8 @@
status = "disabled";
};
- lcdc@53fbc000 {
+ lcdc: lcdc@53fbc000 {
+ compatible = "fsl,imx25-fb", "fsl,imx21-fb";
reg = <0x53fbc000 0x4000>;
interrupts = <39>;
clocks = <&clks 103>, <&clks 66>, <&clks 49>;
@@ -424,6 +441,7 @@
reg = <0x53fd4000 0x4000>;
clocks = <&clks 112>, <&clks 68>;
clock-names = "ipg", "ahb";
+ #dma-cells = <3>;
interrupts = <34>;
};
@@ -444,6 +462,13 @@
interrupts = <26>;
};
+ iim: iim@53ff0000 {
+ compatible = "fsl,imx25-iim", "fsl,imx27-iim";
+ reg = <0x53ff0000 0x4000>;
+ interrupts = <19>;
+ clocks = <&clks 99>;
+ };
+
usbphy1: usbphy@1 {
compatible = "nop-usbphy";
status = "disabled";
diff --git a/arch/arm/boot/dts/imx27-apf27dev.dts b/arch/arm/boot/dts/imx27-apf27dev.dts
index 66b8e1c..2a377ca 100644
--- a/arch/arm/boot/dts/imx27-apf27dev.dts
+++ b/arch/arm/boot/dts/imx27-apf27dev.dts
@@ -53,6 +53,11 @@
&i2c1 {
clock-frequency = <400000>;
status = "okay";
+
+ rtc@68 {
+ compatible = "dallas,ds1374";
+ reg = <0x68>;
+ };
};
&i2c2 {
diff --git a/arch/arm/boot/dts/imx27-phytec-phycard-s-rdk.dts b/arch/arm/boot/dts/imx27-phytec-phycard-s-rdk.dts
new file mode 100644
index 0000000..5a31c77
--- /dev/null
+++ b/arch/arm/boot/dts/imx27-phytec-phycard-s-rdk.dts
@@ -0,0 +1,93 @@
+/*
+ * Copyright 2012 Markus Pargmann, Pengutronix
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include "imx27-phytec-phycard-s-som.dts"
+
+/ {
+ model = "Phytec pca100 rapid development kit";
+ compatible = "phytec,imx27-pca100-rdk", "phytec,imx27-pca100", "fsl,imx27";
+
+ display: display {
+ model = "Primeview-PD050VL1";
+ native-mode = <&timing0>;
+ bits-per-pixel = <16>; /* non-standard but required */
+ fsl,pcr = <0xf0c88080>; /* non-standard but required */
+ display-timings {
+ timing0: 640x480 {
+ hactive = <640>;
+ vactive = <480>;
+ hback-porch = <112>;
+ hfront-porch = <36>;
+ hsync-len = <32>;
+ vback-porch = <33>;
+ vfront-porch = <33>;
+ vsync-len = <2>;
+ clock-frequency = <25000000>;
+ };
+ };
+ };
+
+ regulators {
+ compatible = "simple-bus";
+
+ reg_3v3: 3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "3V3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+ };
+};
+
+&fb {
+ display = <&display>;
+ status = "okay";
+};
+
+&i2c1 {
+ status = "okay";
+
+ rtc@51 {
+ compatible = "nxp,pcf8563";
+ reg = <0x51>;
+ };
+
+ adc@64 {
+ compatible = "maxim,max1037";
+ vcc-supply = <®_3v3>;
+ reg = <0x64>;
+ };
+};
+
+&owire {
+ status = "okay";
+};
+
+&sdhci2 {
+ cd-gpios = <&gpio3 29 0>;
+ status = "okay";
+};
+
+&uart1 {
+ fsl,uart-has-rtscts;
+ status = "okay";
+};
+
+&uart2 {
+ fsl,uart-has-rtscts;
+ status = "okay";
+};
+
+&uart3 {
+ fsl,uart-has-rtscts;
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx27-phytec-phycard-s-som.dts b/arch/arm/boot/dts/imx27-phytec-phycard-s-som.dts
new file mode 100644
index 0000000..c8d57d1
--- /dev/null
+++ b/arch/arm/boot/dts/imx27-phytec-phycard-s-som.dts
@@ -0,0 +1,44 @@
+/*
+ * Copyright 2012 Sascha Hauer, Uwe Kleine-König, Steffen Trumtrar
+ * and Markus Pargmann, Pengutronix
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+#include "imx27.dtsi"
+
+/ {
+ model = "Phytec pca100";
+ compatible = "phytec,imx27-pca100", "fsl,imx27";
+
+ memory {
+ reg = <0xa0000000 0x08000000>; /* 128MB */
+ };
+};
+
+&cspi1 {
+ fsl,spi-num-chipselects = <2>;
+ cs-gpios = <&gpio4 28 0>,
+ <&gpio4 27 0>;
+ status = "okay";
+};
+
+&fec {
+ status = "okay";
+};
+
+&i2c2 {
+ status = "okay";
+
+ at24@52 {
+ compatible = "at,24c32";
+ pagesize = <32>;
+ reg = <0x52>;
+ };
+};
diff --git a/arch/arm/boot/dts/imx27-phytec-phycore-rdk.dts b/arch/arm/boot/dts/imx27-phytec-phycore-rdk.dts
index e7ed978..0fc6551 100644
--- a/arch/arm/boot/dts/imx27-phytec-phycore-rdk.dts
+++ b/arch/arm/boot/dts/imx27-phytec-phycore-rdk.dts
@@ -35,3 +35,16 @@
fsl,uart-has-rtscts;
status = "okay";
};
+
+&weim {
+ can@d4000000 {
+ compatible = "nxp,sja1000";
+ reg = <4 0x00000000 0x00000100>;
+ interrupt-parent = <&gpio5>;
+ interrupts = <19 0x2>;
+ nxp,external-clock-frequency = <16000000>;
+ nxp,tx-output-config = <0x16>;
+ nxp,no-comparator-bypass;
+ fsl,weim-cs-timing = <0x0000dcf6 0x444a0301 0x44443302>;
+ };
+};
diff --git a/arch/arm/boot/dts/imx27-phytec-phycore-som.dts b/arch/arm/boot/dts/imx27-phytec-phycore-som.dts
index f010565..4ec402c 100644
--- a/arch/arm/boot/dts/imx27-phytec-phycore-som.dts
+++ b/arch/arm/boot/dts/imx27-phytec-phycore-som.dts
@@ -17,49 +17,22 @@
compatible = "phytec,imx27-pcm038", "fsl,imx27";
memory {
- reg = <0x0 0x0>;
+ reg = <0xa0000000 0x08000000>;
+ };
+};
+
+&audmux {
+ status = "okay";
+
+ /* SSI0 <=> PINS_4 (MC13783 Audio) */
+ ssi0 {
+ fsl,audmux-port = <0>;
+ fsl,port-config = <0xcb205000>;
};
- soc {
- aipi@10000000 { /* aipi1 */
- serial@1000a000 {
- status = "okay";
- };
-
- i2c@1001d000 {
- clock-frequency = <400000>;
- status = "okay";
- at24@52 {
- compatible = "at,24c32";
- pagesize = <32>;
- reg = <0x52>;
- };
- pcf8563@51 {
- compatible = "nxp,pcf8563";
- reg = <0x51>;
- };
- lm75@4a {
- compatible = "national,lm75";
- reg = <0x4a>;
- };
- };
- };
-
- aipi@10020000 { /* aipi2 */
- ethernet@1002b000 {
- phy-reset-gpios = <&gpio3 30 0>;
- status = "okay";
- };
- };
- };
-
- nor_flash@c0000000 {
- compatible = "cfi-flash";
- bank-width = <2>;
- reg = <0xc0000000 0x02000000>;
- linux,mtd-name = "physmap-flash.0";
- #address-cells = <1>;
- #size-cells = <1>;
+ pins4 {
+ fsl,audmux-port = <2>;
+ fsl,port-config = <0x00001000>;
};
};
@@ -80,28 +53,16 @@
fsl,mc13xxx-uses-rtc;
regulators {
- sw1a_reg: sw1a {
+ /* SW1A and SW1B joined operation */
+ sw1_reg: sw1a {
regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <1200000>;
+ regulator-max-microvolt = <1520000>;
regulator-always-on;
regulator-boot-on;
};
- sw1b_reg: sw1b {
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <1200000>;
- regulator-always-on;
- regulator-boot-on;
- };
-
- sw2a_reg: sw2a {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- regulator-boot-on;
- };
-
- sw2b_reg: sw2b {
+ /* SW2A and SW2B joined operation */
+ sw2_reg: sw2a {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
@@ -172,8 +133,62 @@
};
};
+&fec {
+ phy-reset-gpios = <&gpio3 30 0>;
+ status = "okay";
+};
+
+&i2c2 {
+ clock-frequency = <400000>;
+ status = "okay";
+
+ at24@52 {
+ compatible = "at,24c32";
+ pagesize = <32>;
+ reg = <0x52>;
+ };
+
+ pcf8563@51 {
+ compatible = "nxp,pcf8563";
+ reg = <0x51>;
+ };
+
+ lm75@4a {
+ compatible = "national,lm75";
+ reg = <0x4a>;
+ };
+};
+
&nfc {
nand-bus-width = <8>;
nand-ecc-mode = "hw";
status = "okay";
};
+
+&uart1 {
+ status = "okay";
+};
+
+&weim {
+ status = "okay";
+
+ nor: nor@c0000000 {
+ compatible = "cfi-flash";
+ reg = <0 0x00000000 0x02000000>;
+ bank-width = <2>;
+ linux,mtd-name = "physmap-flash.0";
+ fsl,weim-cs-timing = <0x22c2cf00 0x75000d01 0x00000900>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ };
+
+ sram: sram@c8000000 {
+ compatible = "mtd-ram";
+ reg = <1 0x00000000 0x00800000>;
+ bank-width = <2>;
+ linux,mtd-name = "mtd-ram.0";
+ fsl,weim-cs-timing = <0x0000d843 0x22252521 0x22220a00>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ };
+};
diff --git a/arch/arm/boot/dts/imx27.dtsi b/arch/arm/boot/dts/imx27.dtsi
index 0695264..c037c22 100644
--- a/arch/arm/boot/dts/imx27.dtsi
+++ b/arch/arm/boot/dts/imx27.dtsi
@@ -13,25 +13,27 @@
/ {
aliases {
- serial0 = &uart1;
- serial1 = &uart2;
- serial2 = &uart3;
- serial3 = &uart4;
- serial4 = &uart5;
- serial5 = &uart6;
gpio0 = &gpio1;
gpio1 = &gpio2;
gpio2 = &gpio3;
gpio3 = &gpio4;
gpio4 = &gpio5;
gpio5 = &gpio6;
+ i2c0 = &i2c1;
+ i2c1 = &i2c2;
+ serial0 = &uart1;
+ serial1 = &uart2;
+ serial2 = &uart3;
+ serial3 = &uart4;
+ serial4 = &uart5;
+ serial5 = &uart6;
spi0 = &cspi1;
spi1 = &cspi2;
spi2 = &cspi3;
};
- avic: avic-interrupt-controller@e0000000 {
- compatible = "fsl,imx27-avic", "fsl,avic";
+ aitc: aitc-interrupt-controller@e0000000 {
+ compatible = "fsl,imx27-aitc", "fsl,avic";
interrupt-controller;
#interrupt-cells = <1>;
reg = <0x10040000 0x1000>;
@@ -47,11 +49,29 @@
};
};
+ cpus {
+ #size-cells = <0>;
+ #address-cells = <1>;
+
+ cpu: cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,arm926ej-s";
+ operating-points = <
+ /* kHz uV */
+ 266000 1300000
+ 399000 1450000
+ >;
+ clock-latency = <62500>;
+ clocks = <&clks 18>;
+ voltage-tolerance = <5>;
+ };
+ };
+
soc {
#address-cells = <1>;
#size-cells = <1>;
compatible = "simple-bus";
- interrupt-parent = <&avic>;
+ interrupt-parent = <&aitc>;
ranges;
aipi@10000000 { /* AIPI1 */
@@ -75,7 +95,7 @@
compatible = "fsl,imx27-wdt", "fsl,imx21-wdt";
reg = <0x10002000 0x1000>;
interrupts = <27>;
- clocks = <&clks 0>;
+ clocks = <&clks 74>;
};
gpt1: timer@10003000 {
@@ -102,7 +122,7 @@
clock-names = "ipg", "per";
};
- pwm0: pwm@10006000 {
+ pwm: pwm@10006000 {
compatible = "fsl,imx27-pwm";
reg = <0x10006000 0x1000>;
interrupts = <23>;
@@ -110,6 +130,21 @@
clock-names = "ipg", "per";
};
+ kpp: kpp@10008000 {
+ compatible = "fsl,imx27-kpp", "fsl,imx21-kpp";
+ reg = <0x10008000 0x1000>;
+ interrupts = <21>;
+ clocks = <&clks 37>;
+ status = "disabled";
+ };
+
+ owire: owire@10009000 {
+ compatible = "fsl,imx27-owire", "fsl,imx21-owire";
+ reg = <0x10009000 0x1000>;
+ clocks = <&clks 35>;
+ status = "disabled";
+ };
+
uart1: serial@1000a000 {
compatible = "fsl,imx27-uart", "fsl,imx21-uart";
reg = <0x1000a000 0x1000>;
@@ -260,6 +295,14 @@
#interrupt-cells = <2>;
};
+ audmux: audmux@10016000 {
+ compatible = "fsl,imx27-audmux", "fsl,imx21-audmux";
+ reg = <0x10016000 0x1000>;
+ clocks = <&clks 0>;
+ clock-names = "audmux";
+ status = "disabled";
+ };
+
cspi3: cspi@10017000 {
#address-cells = <1>;
#size-cells = <0>;
@@ -342,6 +385,15 @@
reg = <0x10020000 0x20000>;
ranges;
+ fb: fb@10021000 {
+ compatible = "fsl,imx27-fb", "fsl,imx21-fb";
+ interrupts = <61>;
+ reg = <0x10021000 0x1000>;
+ clocks = <&clks 36>, <&clks 65>, <&clks 59>;
+ clock-names = "ipg", "ahb", "per";
+ status = "disabled";
+ };
+
coda: coda@10023000 {
compatible = "fsl,imx27-vpu";
reg = <0x10023000 0x0200>;
@@ -351,27 +403,37 @@
iram = <&iram>;
};
+ sahara2: sahara@10025000 {
+ compatible = "fsl,imx27-sahara";
+ reg = <0x10025000 0x1000>;
+ interrupts = <59>;
+ clocks = <&clks 32>, <&clks 64>;
+ clock-names = "ipg", "ahb";
+ };
+
clks: ccm@10027000{
compatible = "fsl,imx27-ccm";
reg = <0x10027000 0x1000>;
#clock-cells = <1>;
};
+ iim: iim@10028000 {
+ compatible = "fsl,imx27-iim";
+ reg = <0x10028000 0x1000>;
+ interrupts = <62>;
+ clocks = <&clks 38>;
+ };
+
fec: ethernet@1002b000 {
compatible = "fsl,imx27-fec";
reg = <0x1002b000 0x4000>;
interrupts = <50>;
- clocks = <&clks 48>, <&clks 67>, <&clks 0>;
- clock-names = "ipg", "ahb", "ptp";
+ clocks = <&clks 48>, <&clks 67>;
+ clock-names = "ipg", "ahb";
status = "disabled";
};
};
- iram: iram@ffff4c00 {
- compatible = "mmio-sram";
- reg = <0xffff4c00 0xb400>;
- };
-
nfc: nand@d8000000 {
#address-cells = <1>;
#size-cells = <1>;
@@ -381,5 +443,27 @@
clocks = <&clks 54>;
status = "disabled";
};
+
+ weim: weim@d8002000 {
+ #address-cells = <2>;
+ #size-cells = <1>;
+ compatible = "fsl,imx27-weim";
+ reg = <0xd8002000 0x1000>;
+ clocks = <&clks 0>;
+ ranges = <
+ 0 0 0xc0000000 0x08000000
+ 1 0 0xc8000000 0x08000000
+ 2 0 0xd0000000 0x02000000
+ 3 0 0xd2000000 0x02000000
+ 4 0 0xd4000000 0x02000000
+ 5 0 0xd6000000 0x02000000
+ >;
+ status = "disabled";
+ };
+
+ iram: iram@ffff4c00 {
+ compatible = "mmio-sram";
+ reg = <0xffff4c00 0xb400>;
+ };
};
};
diff --git a/arch/arm/boot/dts/imx31.dtsi b/arch/arm/boot/dts/imx31.dtsi
index c544925..c34f825 100644
--- a/arch/arm/boot/dts/imx31.dtsi
+++ b/arch/arm/boot/dts/imx31.dtsi
@@ -20,6 +20,16 @@
serial4 = &uart5;
};
+ cpus {
+ #address-cells = <0>;
+ #size-cells = <0>;
+
+ cpu {
+ compatible = "arm,arm1136";
+ device_type = "cpu";
+ };
+ };
+
avic: avic-interrupt-controller@60000000 {
compatible = "fsl,imx31-avic", "fsl,avic";
interrupt-controller;
@@ -94,6 +104,13 @@
status = "disabled";
};
+ iim: iim@5001c000 {
+ compatible = "fsl,imx31-iim", "fsl,imx27-iim";
+ reg = <0x5001c000 0x1000>;
+ interrupts = <19>;
+ clocks = <&clks 25>;
+ };
+
clks: ccm@53f80000{
compatible = "fsl,imx31-ccm";
reg = <0x53f80000 0x4000>;
diff --git a/arch/arm/boot/dts/imx51-apf51.dts b/arch/arm/boot/dts/imx51-apf51.dts
index 8f7f9ac..b360699 100644
--- a/arch/arm/boot/dts/imx51-apf51.dts
+++ b/arch/arm/boot/dts/imx51-apf51.dts
@@ -26,10 +26,6 @@
};
clocks {
- ckih1 {
- clock-frequency = <0>;
- };
-
osc {
clock-frequency = <33554432>;
};
diff --git a/arch/arm/boot/dts/imx51-babbage.dts b/arch/arm/boot/dts/imx51-babbage.dts
index ad3471c..1d337d9 100644
--- a/arch/arm/boot/dts/imx51-babbage.dts
+++ b/arch/arm/boot/dts/imx51-babbage.dts
@@ -63,6 +63,10 @@
};
clocks {
+ ckih1 {
+ clock-frequency = <22579200>;
+ };
+
clk_26M: codec_clock {
compatible = "fixed-clock";
reg=<0>;
@@ -108,6 +112,7 @@
#size-cells = <0>;
compatible = "fsl,mc13892";
spi-max-frequency = <6000000>;
+ spi-cs-high;
reg = <0>;
interrupt-parent = <&gpio1>;
interrupts = <8 0x4>;
diff --git a/arch/arm/boot/dts/imx51.dtsi b/arch/arm/boot/dts/imx51.dtsi
index 25764b5..a85abb4 100644
--- a/arch/arm/boot/dts/imx51.dtsi
+++ b/arch/arm/boot/dts/imx51.dtsi
@@ -15,13 +15,18 @@
/ {
aliases {
- serial0 = &uart1;
- serial1 = &uart2;
- serial2 = &uart3;
gpio0 = &gpio1;
gpio1 = &gpio2;
gpio2 = &gpio3;
gpio3 = &gpio4;
+ i2c0 = &i2c1;
+ i2c1 = &i2c2;
+ serial0 = &uart1;
+ serial1 = &uart2;
+ serial2 = &uart3;
+ spi0 = &ecspi1;
+ spi1 = &ecspi2;
+ spi2 = &cspi;
};
tzic: tz-interrupt-controller@e0000000 {
@@ -42,7 +47,7 @@
ckih1 {
compatible = "fsl,imx-ckih1", "fixed-clock";
- clock-frequency = <22579200>;
+ clock-frequency = <0>;
};
ckih2 {
@@ -149,6 +154,9 @@
reg = <0x70014000 0x4000>;
interrupts = <30>;
clocks = <&clks 49>;
+ dmas = <&sdma 24 1 0>,
+ <&sdma 25 1 0>;
+ dma-names = "rx", "tx";
fsl,fifo-depth = <15>;
fsl,ssi-dma-events = <25 24 23 22>; /* TX0 RX0 TX1 RX1 */
status = "disabled";
@@ -300,275 +308,6 @@
iomuxc: iomuxc@73fa8000 {
compatible = "fsl,imx51-iomuxc";
reg = <0x73fa8000 0x4000>;
-
- audmux {
- pinctrl_audmux_1: audmuxgrp-1 {
- fsl,pins = <
- MX51_PAD_AUD3_BB_TXD__AUD3_TXD 0x80000000
- MX51_PAD_AUD3_BB_RXD__AUD3_RXD 0x80000000
- MX51_PAD_AUD3_BB_CK__AUD3_TXC 0x80000000
- MX51_PAD_AUD3_BB_FS__AUD3_TXFS 0x80000000
- >;
- };
- };
-
- fec {
- pinctrl_fec_1: fecgrp-1 {
- fsl,pins = <
- MX51_PAD_EIM_EB2__FEC_MDIO 0x80000000
- MX51_PAD_EIM_EB3__FEC_RDATA1 0x80000000
- MX51_PAD_EIM_CS2__FEC_RDATA2 0x80000000
- MX51_PAD_EIM_CS3__FEC_RDATA3 0x80000000
- MX51_PAD_EIM_CS4__FEC_RX_ER 0x80000000
- MX51_PAD_EIM_CS5__FEC_CRS 0x80000000
- MX51_PAD_NANDF_RB2__FEC_COL 0x80000000
- MX51_PAD_NANDF_RB3__FEC_RX_CLK 0x80000000
- MX51_PAD_NANDF_D9__FEC_RDATA0 0x80000000
- MX51_PAD_NANDF_D8__FEC_TDATA0 0x80000000
- MX51_PAD_NANDF_CS2__FEC_TX_ER 0x80000000
- MX51_PAD_NANDF_CS3__FEC_MDC 0x80000000
- MX51_PAD_NANDF_CS4__FEC_TDATA1 0x80000000
- MX51_PAD_NANDF_CS5__FEC_TDATA2 0x80000000
- MX51_PAD_NANDF_CS6__FEC_TDATA3 0x80000000
- MX51_PAD_NANDF_CS7__FEC_TX_EN 0x80000000
- MX51_PAD_NANDF_RDY_INT__FEC_TX_CLK 0x80000000
- >;
- };
-
- pinctrl_fec_2: fecgrp-2 {
- fsl,pins = <
- MX51_PAD_DI_GP3__FEC_TX_ER 0x80000000
- MX51_PAD_DI2_PIN4__FEC_CRS 0x80000000
- MX51_PAD_DI2_PIN2__FEC_MDC 0x80000000
- MX51_PAD_DI2_PIN3__FEC_MDIO 0x80000000
- MX51_PAD_DI2_DISP_CLK__FEC_RDATA1 0x80000000
- MX51_PAD_DI_GP4__FEC_RDATA2 0x80000000
- MX51_PAD_DISP2_DAT0__FEC_RDATA3 0x80000000
- MX51_PAD_DISP2_DAT1__FEC_RX_ER 0x80000000
- MX51_PAD_DISP2_DAT6__FEC_TDATA1 0x80000000
- MX51_PAD_DISP2_DAT7__FEC_TDATA2 0x80000000
- MX51_PAD_DISP2_DAT8__FEC_TDATA3 0x80000000
- MX51_PAD_DISP2_DAT9__FEC_TX_EN 0x80000000
- MX51_PAD_DISP2_DAT10__FEC_COL 0x80000000
- MX51_PAD_DISP2_DAT11__FEC_RX_CLK 0x80000000
- MX51_PAD_DISP2_DAT12__FEC_RX_DV 0x80000000
- MX51_PAD_DISP2_DAT13__FEC_TX_CLK 0x80000000
- MX51_PAD_DISP2_DAT14__FEC_RDATA0 0x80000000
- MX51_PAD_DISP2_DAT15__FEC_TDATA0 0x80000000
- >;
- };
- };
-
- ecspi1 {
- pinctrl_ecspi1_1: ecspi1grp-1 {
- fsl,pins = <
- MX51_PAD_CSPI1_MISO__ECSPI1_MISO 0x185
- MX51_PAD_CSPI1_MOSI__ECSPI1_MOSI 0x185
- MX51_PAD_CSPI1_SCLK__ECSPI1_SCLK 0x185
- >;
- };
- };
-
- ecspi2 {
- pinctrl_ecspi2_1: ecspi2grp-1 {
- fsl,pins = <
- MX51_PAD_NANDF_RB3__ECSPI2_MISO 0x185
- MX51_PAD_NANDF_D15__ECSPI2_MOSI 0x185
- MX51_PAD_NANDF_RB2__ECSPI2_SCLK 0x185
- >;
- };
- };
-
- esdhc1 {
- pinctrl_esdhc1_1: esdhc1grp-1 {
- fsl,pins = <
- MX51_PAD_SD1_CMD__SD1_CMD 0x400020d5
- MX51_PAD_SD1_CLK__SD1_CLK 0x20d5
- MX51_PAD_SD1_DATA0__SD1_DATA0 0x20d5
- MX51_PAD_SD1_DATA1__SD1_DATA1 0x20d5
- MX51_PAD_SD1_DATA2__SD1_DATA2 0x20d5
- MX51_PAD_SD1_DATA3__SD1_DATA3 0x20d5
- >;
- };
- };
-
- esdhc2 {
- pinctrl_esdhc2_1: esdhc2grp-1 {
- fsl,pins = <
- MX51_PAD_SD2_CMD__SD2_CMD 0x400020d5
- MX51_PAD_SD2_CLK__SD2_CLK 0x20d5
- MX51_PAD_SD2_DATA0__SD2_DATA0 0x20d5
- MX51_PAD_SD2_DATA1__SD2_DATA1 0x20d5
- MX51_PAD_SD2_DATA2__SD2_DATA2 0x20d5
- MX51_PAD_SD2_DATA3__SD2_DATA3 0x20d5
- >;
- };
- };
-
- i2c2 {
- pinctrl_i2c2_1: i2c2grp-1 {
- fsl,pins = <
- MX51_PAD_KEY_COL4__I2C2_SCL 0x400001ed
- MX51_PAD_KEY_COL5__I2C2_SDA 0x400001ed
- >;
- };
-
- pinctrl_i2c2_2: i2c2grp-2 {
- fsl,pins = <
- MX51_PAD_EIM_D27__I2C2_SCL 0x400001ed
- MX51_PAD_EIM_D24__I2C2_SDA 0x400001ed
- >;
- };
- };
-
- ipu_disp1 {
- pinctrl_ipu_disp1_1: ipudisp1grp-1 {
- fsl,pins = <
- MX51_PAD_DISP1_DAT0__DISP1_DAT0 0x5
- MX51_PAD_DISP1_DAT1__DISP1_DAT1 0x5
- MX51_PAD_DISP1_DAT2__DISP1_DAT2 0x5
- MX51_PAD_DISP1_DAT3__DISP1_DAT3 0x5
- MX51_PAD_DISP1_DAT4__DISP1_DAT4 0x5
- MX51_PAD_DISP1_DAT5__DISP1_DAT5 0x5
- MX51_PAD_DISP1_DAT6__DISP1_DAT6 0x5
- MX51_PAD_DISP1_DAT7__DISP1_DAT7 0x5
- MX51_PAD_DISP1_DAT8__DISP1_DAT8 0x5
- MX51_PAD_DISP1_DAT9__DISP1_DAT9 0x5
- MX51_PAD_DISP1_DAT10__DISP1_DAT10 0x5
- MX51_PAD_DISP1_DAT11__DISP1_DAT11 0x5
- MX51_PAD_DISP1_DAT12__DISP1_DAT12 0x5
- MX51_PAD_DISP1_DAT13__DISP1_DAT13 0x5
- MX51_PAD_DISP1_DAT14__DISP1_DAT14 0x5
- MX51_PAD_DISP1_DAT15__DISP1_DAT15 0x5
- MX51_PAD_DISP1_DAT16__DISP1_DAT16 0x5
- MX51_PAD_DISP1_DAT17__DISP1_DAT17 0x5
- MX51_PAD_DISP1_DAT18__DISP1_DAT18 0x5
- MX51_PAD_DISP1_DAT19__DISP1_DAT19 0x5
- MX51_PAD_DISP1_DAT20__DISP1_DAT20 0x5
- MX51_PAD_DISP1_DAT21__DISP1_DAT21 0x5
- MX51_PAD_DISP1_DAT22__DISP1_DAT22 0x5
- MX51_PAD_DISP1_DAT23__DISP1_DAT23 0x5
- MX51_PAD_DI1_PIN2__DI1_PIN2 0x5 /* hsync */
- MX51_PAD_DI1_PIN3__DI1_PIN3 0x5 /* vsync */
- >;
- };
- };
-
- ipu_disp2 {
- pinctrl_ipu_disp2_1: ipudisp2grp-1 {
- fsl,pins = <
- MX51_PAD_DISP2_DAT0__DISP2_DAT0 0x5
- MX51_PAD_DISP2_DAT1__DISP2_DAT1 0x5
- MX51_PAD_DISP2_DAT2__DISP2_DAT2 0x5
- MX51_PAD_DISP2_DAT3__DISP2_DAT3 0x5
- MX51_PAD_DISP2_DAT4__DISP2_DAT4 0x5
- MX51_PAD_DISP2_DAT5__DISP2_DAT5 0x5
- MX51_PAD_DISP2_DAT6__DISP2_DAT6 0x5
- MX51_PAD_DISP2_DAT7__DISP2_DAT7 0x5
- MX51_PAD_DISP2_DAT8__DISP2_DAT8 0x5
- MX51_PAD_DISP2_DAT9__DISP2_DAT9 0x5
- MX51_PAD_DISP2_DAT10__DISP2_DAT10 0x5
- MX51_PAD_DISP2_DAT11__DISP2_DAT11 0x5
- MX51_PAD_DISP2_DAT12__DISP2_DAT12 0x5
- MX51_PAD_DISP2_DAT13__DISP2_DAT13 0x5
- MX51_PAD_DISP2_DAT14__DISP2_DAT14 0x5
- MX51_PAD_DISP2_DAT15__DISP2_DAT15 0x5
- MX51_PAD_DI2_PIN2__DI2_PIN2 0x5 /* hsync */
- MX51_PAD_DI2_PIN3__DI2_PIN3 0x5 /* vsync */
- MX51_PAD_DI2_DISP_CLK__DI2_DISP_CLK 0x5
- MX51_PAD_DI_GP4__DI2_PIN15 0x5
- >;
- };
- };
-
- pata {
- pinctrl_pata_1: patagrp-1 {
- fsl,pins = <
- MX51_PAD_NANDF_WE_B__PATA_DIOW 0x2004
- MX51_PAD_NANDF_RE_B__PATA_DIOR 0x2004
- MX51_PAD_NANDF_ALE__PATA_BUFFER_EN 0x2004
- MX51_PAD_NANDF_CLE__PATA_RESET_B 0x2004
- MX51_PAD_NANDF_WP_B__PATA_DMACK 0x2004
- MX51_PAD_NANDF_RB0__PATA_DMARQ 0x2004
- MX51_PAD_NANDF_RB1__PATA_IORDY 0x2004
- MX51_PAD_GPIO_NAND__PATA_INTRQ 0x2004
- MX51_PAD_NANDF_CS2__PATA_CS_0 0x2004
- MX51_PAD_NANDF_CS3__PATA_CS_1 0x2004
- MX51_PAD_NANDF_CS4__PATA_DA_0 0x2004
- MX51_PAD_NANDF_CS5__PATA_DA_1 0x2004
- MX51_PAD_NANDF_CS6__PATA_DA_2 0x2004
- MX51_PAD_NANDF_D15__PATA_DATA15 0x2004
- MX51_PAD_NANDF_D14__PATA_DATA14 0x2004
- MX51_PAD_NANDF_D13__PATA_DATA13 0x2004
- MX51_PAD_NANDF_D12__PATA_DATA12 0x2004
- MX51_PAD_NANDF_D11__PATA_DATA11 0x2004
- MX51_PAD_NANDF_D10__PATA_DATA10 0x2004
- MX51_PAD_NANDF_D9__PATA_DATA9 0x2004
- MX51_PAD_NANDF_D8__PATA_DATA8 0x2004
- MX51_PAD_NANDF_D7__PATA_DATA7 0x2004
- MX51_PAD_NANDF_D6__PATA_DATA6 0x2004
- MX51_PAD_NANDF_D5__PATA_DATA5 0x2004
- MX51_PAD_NANDF_D4__PATA_DATA4 0x2004
- MX51_PAD_NANDF_D3__PATA_DATA3 0x2004
- MX51_PAD_NANDF_D2__PATA_DATA2 0x2004
- MX51_PAD_NANDF_D1__PATA_DATA1 0x2004
- MX51_PAD_NANDF_D0__PATA_DATA0 0x2004
- >;
- };
- };
-
- uart1 {
- pinctrl_uart1_1: uart1grp-1 {
- fsl,pins = <
- MX51_PAD_UART1_RXD__UART1_RXD 0x1c5
- MX51_PAD_UART1_TXD__UART1_TXD 0x1c5
- MX51_PAD_UART1_RTS__UART1_RTS 0x1c5
- MX51_PAD_UART1_CTS__UART1_CTS 0x1c5
- >;
- };
- };
-
- uart2 {
- pinctrl_uart2_1: uart2grp-1 {
- fsl,pins = <
- MX51_PAD_UART2_RXD__UART2_RXD 0x1c5
- MX51_PAD_UART2_TXD__UART2_TXD 0x1c5
- >;
- };
- };
-
- uart3 {
- pinctrl_uart3_1: uart3grp-1 {
- fsl,pins = <
- MX51_PAD_EIM_D25__UART3_RXD 0x1c5
- MX51_PAD_EIM_D26__UART3_TXD 0x1c5
- MX51_PAD_EIM_D27__UART3_RTS 0x1c5
- MX51_PAD_EIM_D24__UART3_CTS 0x1c5
- >;
- };
-
- pinctrl_uart3_2: uart3grp-2 {
- fsl,pins = <
- MX51_PAD_UART3_RXD__UART3_RXD 0x1c5
- MX51_PAD_UART3_TXD__UART3_TXD 0x1c5
- >;
- };
- };
-
- kpp {
- pinctrl_kpp_1: kppgrp-1 {
- fsl,pins = <
- MX51_PAD_KEY_ROW0__KEY_ROW0 0xe0
- MX51_PAD_KEY_ROW1__KEY_ROW1 0xe0
- MX51_PAD_KEY_ROW2__KEY_ROW2 0xe0
- MX51_PAD_KEY_ROW3__KEY_ROW3 0xe0
- MX51_PAD_KEY_COL0__KEY_COL0 0xe8
- MX51_PAD_KEY_COL1__KEY_COL1 0xe8
- MX51_PAD_KEY_COL2__KEY_COL2 0xe8
- MX51_PAD_KEY_COL3__KEY_COL3 0xe8
- >;
- };
- };
};
pwm1: pwm@73fb4000 {
@@ -628,6 +367,13 @@
reg = <0x80000000 0x10000000>;
ranges;
+ iim: iim@83f98000 {
+ compatible = "fsl,imx51-iim", "fsl,imx27-iim";
+ reg = <0x83f98000 0x4000>;
+ interrupts = <69>;
+ clocks = <&clks 107>;
+ };
+
ecspi2: ecspi@83fac000 {
#address-cells = <1>;
#size-cells = <0>;
@@ -645,6 +391,7 @@
interrupts = <6>;
clocks = <&clks 56>, <&clks 56>;
clock-names = "ipg", "ahb";
+ #dma-cells = <3>;
fsl,sdma-ram-script-name = "imx/sdma/sdma-imx51.bin";
};
@@ -684,6 +431,9 @@
reg = <0x83fcc000 0x4000>;
interrupts = <29>;
clocks = <&clks 48>;
+ dmas = <&sdma 28 0 0>,
+ <&sdma 29 0 0>;
+ dma-names = "rx", "tx";
fsl,fifo-depth = <15>;
fsl,ssi-dma-events = <29 28 27 26>; /* TX0 RX0 TX1 RX1 */
status = "disabled";
@@ -695,6 +445,23 @@
status = "disabled";
};
+ weim: weim@83fda000 {
+ #address-cells = <2>;
+ #size-cells = <1>;
+ compatible = "fsl,imx51-weim";
+ reg = <0x83fda000 0x1000>;
+ clocks = <&clks 57>;
+ ranges = <
+ 0 0 0xb0000000 0x08000000
+ 1 0 0xb8000000 0x08000000
+ 2 0 0xc0000000 0x08000000
+ 3 0 0xc8000000 0x04000000
+ 4 0 0xcc000000 0x02000000
+ 5 0 0xce000000 0x02000000
+ >;
+ status = "disabled";
+ };
+
nfc: nand@83fdb000 {
compatible = "fsl,imx51-nand";
reg = <0x83fdb000 0x1000 0xcfff0000 0x10000>;
@@ -716,6 +483,9 @@
reg = <0x83fe8000 0x4000>;
interrupts = <96>;
clocks = <&clks 50>;
+ dmas = <&sdma 46 0 0>,
+ <&sdma 47 0 0>;
+ dma-names = "rx", "tx";
fsl,fifo-depth = <15>;
fsl,ssi-dma-events = <47 46 37 35>; /* TX0 RX0 TX1 RX1 */
status = "disabled";
@@ -732,3 +502,319 @@
};
};
};
+
+&iomuxc {
+ audmux {
+ pinctrl_audmux_1: audmuxgrp-1 {
+ fsl,pins = <
+ MX51_PAD_AUD3_BB_TXD__AUD3_TXD 0x80000000
+ MX51_PAD_AUD3_BB_RXD__AUD3_RXD 0x80000000
+ MX51_PAD_AUD3_BB_CK__AUD3_TXC 0x80000000
+ MX51_PAD_AUD3_BB_FS__AUD3_TXFS 0x80000000
+ >;
+ };
+ };
+
+ fec {
+ pinctrl_fec_1: fecgrp-1 {
+ fsl,pins = <
+ MX51_PAD_EIM_EB2__FEC_MDIO 0x80000000
+ MX51_PAD_EIM_EB3__FEC_RDATA1 0x80000000
+ MX51_PAD_EIM_CS2__FEC_RDATA2 0x80000000
+ MX51_PAD_EIM_CS3__FEC_RDATA3 0x80000000
+ MX51_PAD_EIM_CS4__FEC_RX_ER 0x80000000
+ MX51_PAD_EIM_CS5__FEC_CRS 0x80000000
+ MX51_PAD_NANDF_RB2__FEC_COL 0x80000000
+ MX51_PAD_NANDF_RB3__FEC_RX_CLK 0x80000000
+ MX51_PAD_NANDF_D9__FEC_RDATA0 0x80000000
+ MX51_PAD_NANDF_D8__FEC_TDATA0 0x80000000
+ MX51_PAD_NANDF_CS2__FEC_TX_ER 0x80000000
+ MX51_PAD_NANDF_CS3__FEC_MDC 0x80000000
+ MX51_PAD_NANDF_CS4__FEC_TDATA1 0x80000000
+ MX51_PAD_NANDF_CS5__FEC_TDATA2 0x80000000
+ MX51_PAD_NANDF_CS6__FEC_TDATA3 0x80000000
+ MX51_PAD_NANDF_CS7__FEC_TX_EN 0x80000000
+ MX51_PAD_NANDF_RDY_INT__FEC_TX_CLK 0x80000000
+ >;
+ };
+
+ pinctrl_fec_2: fecgrp-2 {
+ fsl,pins = <
+ MX51_PAD_DI_GP3__FEC_TX_ER 0x80000000
+ MX51_PAD_DI2_PIN4__FEC_CRS 0x80000000
+ MX51_PAD_DI2_PIN2__FEC_MDC 0x80000000
+ MX51_PAD_DI2_PIN3__FEC_MDIO 0x80000000
+ MX51_PAD_DI2_DISP_CLK__FEC_RDATA1 0x80000000
+ MX51_PAD_DI_GP4__FEC_RDATA2 0x80000000
+ MX51_PAD_DISP2_DAT0__FEC_RDATA3 0x80000000
+ MX51_PAD_DISP2_DAT1__FEC_RX_ER 0x80000000
+ MX51_PAD_DISP2_DAT6__FEC_TDATA1 0x80000000
+ MX51_PAD_DISP2_DAT7__FEC_TDATA2 0x80000000
+ MX51_PAD_DISP2_DAT8__FEC_TDATA3 0x80000000
+ MX51_PAD_DISP2_DAT9__FEC_TX_EN 0x80000000
+ MX51_PAD_DISP2_DAT10__FEC_COL 0x80000000
+ MX51_PAD_DISP2_DAT11__FEC_RX_CLK 0x80000000
+ MX51_PAD_DISP2_DAT12__FEC_RX_DV 0x80000000
+ MX51_PAD_DISP2_DAT13__FEC_TX_CLK 0x80000000
+ MX51_PAD_DISP2_DAT14__FEC_RDATA0 0x80000000
+ MX51_PAD_DISP2_DAT15__FEC_TDATA0 0x80000000
+ >;
+ };
+ };
+
+ ecspi1 {
+ pinctrl_ecspi1_1: ecspi1grp-1 {
+ fsl,pins = <
+ MX51_PAD_CSPI1_MISO__ECSPI1_MISO 0x185
+ MX51_PAD_CSPI1_MOSI__ECSPI1_MOSI 0x185
+ MX51_PAD_CSPI1_SCLK__ECSPI1_SCLK 0x185
+ >;
+ };
+ };
+
+ ecspi2 {
+ pinctrl_ecspi2_1: ecspi2grp-1 {
+ fsl,pins = <
+ MX51_PAD_NANDF_RB3__ECSPI2_MISO 0x185
+ MX51_PAD_NANDF_D15__ECSPI2_MOSI 0x185
+ MX51_PAD_NANDF_RB2__ECSPI2_SCLK 0x185
+ >;
+ };
+ };
+
+ esdhc1 {
+ pinctrl_esdhc1_1: esdhc1grp-1 {
+ fsl,pins = <
+ MX51_PAD_SD1_CMD__SD1_CMD 0x400020d5
+ MX51_PAD_SD1_CLK__SD1_CLK 0x20d5
+ MX51_PAD_SD1_DATA0__SD1_DATA0 0x20d5
+ MX51_PAD_SD1_DATA1__SD1_DATA1 0x20d5
+ MX51_PAD_SD1_DATA2__SD1_DATA2 0x20d5
+ MX51_PAD_SD1_DATA3__SD1_DATA3 0x20d5
+ >;
+ };
+ };
+
+ esdhc2 {
+ pinctrl_esdhc2_1: esdhc2grp-1 {
+ fsl,pins = <
+ MX51_PAD_SD2_CMD__SD2_CMD 0x400020d5
+ MX51_PAD_SD2_CLK__SD2_CLK 0x20d5
+ MX51_PAD_SD2_DATA0__SD2_DATA0 0x20d5
+ MX51_PAD_SD2_DATA1__SD2_DATA1 0x20d5
+ MX51_PAD_SD2_DATA2__SD2_DATA2 0x20d5
+ MX51_PAD_SD2_DATA3__SD2_DATA3 0x20d5
+ >;
+ };
+ };
+
+ i2c2 {
+ pinctrl_i2c2_1: i2c2grp-1 {
+ fsl,pins = <
+ MX51_PAD_KEY_COL4__I2C2_SCL 0x400001ed
+ MX51_PAD_KEY_COL5__I2C2_SDA 0x400001ed
+ >;
+ };
+
+ pinctrl_i2c2_2: i2c2grp-2 {
+ fsl,pins = <
+ MX51_PAD_EIM_D27__I2C2_SCL 0x400001ed
+ MX51_PAD_EIM_D24__I2C2_SDA 0x400001ed
+ >;
+ };
+
+ pinctrl_i2c2_3: i2c2grp-3 {
+ fsl,pins = <
+ MX51_PAD_GPIO1_2__I2C2_SCL 0x400001ed
+ MX51_PAD_GPIO1_3__I2C2_SDA 0x400001ed
+ >;
+ };
+ };
+
+ ipu_disp1 {
+ pinctrl_ipu_disp1_1: ipudisp1grp-1 {
+ fsl,pins = <
+ MX51_PAD_DISP1_DAT0__DISP1_DAT0 0x5
+ MX51_PAD_DISP1_DAT1__DISP1_DAT1 0x5
+ MX51_PAD_DISP1_DAT2__DISP1_DAT2 0x5
+ MX51_PAD_DISP1_DAT3__DISP1_DAT3 0x5
+ MX51_PAD_DISP1_DAT4__DISP1_DAT4 0x5
+ MX51_PAD_DISP1_DAT5__DISP1_DAT5 0x5
+ MX51_PAD_DISP1_DAT6__DISP1_DAT6 0x5
+ MX51_PAD_DISP1_DAT7__DISP1_DAT7 0x5
+ MX51_PAD_DISP1_DAT8__DISP1_DAT8 0x5
+ MX51_PAD_DISP1_DAT9__DISP1_DAT9 0x5
+ MX51_PAD_DISP1_DAT10__DISP1_DAT10 0x5
+ MX51_PAD_DISP1_DAT11__DISP1_DAT11 0x5
+ MX51_PAD_DISP1_DAT12__DISP1_DAT12 0x5
+ MX51_PAD_DISP1_DAT13__DISP1_DAT13 0x5
+ MX51_PAD_DISP1_DAT14__DISP1_DAT14 0x5
+ MX51_PAD_DISP1_DAT15__DISP1_DAT15 0x5
+ MX51_PAD_DISP1_DAT16__DISP1_DAT16 0x5
+ MX51_PAD_DISP1_DAT17__DISP1_DAT17 0x5
+ MX51_PAD_DISP1_DAT18__DISP1_DAT18 0x5
+ MX51_PAD_DISP1_DAT19__DISP1_DAT19 0x5
+ MX51_PAD_DISP1_DAT20__DISP1_DAT20 0x5
+ MX51_PAD_DISP1_DAT21__DISP1_DAT21 0x5
+ MX51_PAD_DISP1_DAT22__DISP1_DAT22 0x5
+ MX51_PAD_DISP1_DAT23__DISP1_DAT23 0x5
+ MX51_PAD_DI1_PIN2__DI1_PIN2 0x5 /* hsync */
+ MX51_PAD_DI1_PIN3__DI1_PIN3 0x5 /* vsync */
+ >;
+ };
+ };
+
+ ipu_disp2 {
+ pinctrl_ipu_disp2_1: ipudisp2grp-1 {
+ fsl,pins = <
+ MX51_PAD_DISP2_DAT0__DISP2_DAT0 0x5
+ MX51_PAD_DISP2_DAT1__DISP2_DAT1 0x5
+ MX51_PAD_DISP2_DAT2__DISP2_DAT2 0x5
+ MX51_PAD_DISP2_DAT3__DISP2_DAT3 0x5
+ MX51_PAD_DISP2_DAT4__DISP2_DAT4 0x5
+ MX51_PAD_DISP2_DAT5__DISP2_DAT5 0x5
+ MX51_PAD_DISP2_DAT6__DISP2_DAT6 0x5
+ MX51_PAD_DISP2_DAT7__DISP2_DAT7 0x5
+ MX51_PAD_DISP2_DAT8__DISP2_DAT8 0x5
+ MX51_PAD_DISP2_DAT9__DISP2_DAT9 0x5
+ MX51_PAD_DISP2_DAT10__DISP2_DAT10 0x5
+ MX51_PAD_DISP2_DAT11__DISP2_DAT11 0x5
+ MX51_PAD_DISP2_DAT12__DISP2_DAT12 0x5
+ MX51_PAD_DISP2_DAT13__DISP2_DAT13 0x5
+ MX51_PAD_DISP2_DAT14__DISP2_DAT14 0x5
+ MX51_PAD_DISP2_DAT15__DISP2_DAT15 0x5
+ MX51_PAD_DI2_PIN2__DI2_PIN2 0x5 /* hsync */
+ MX51_PAD_DI2_PIN3__DI2_PIN3 0x5 /* vsync */
+ MX51_PAD_DI2_DISP_CLK__DI2_DISP_CLK 0x5 /* CLK */
+ MX51_PAD_DI_GP4__DI2_PIN15 0x5 /* DE */
+ >;
+ };
+ };
+
+ kpp {
+ pinctrl_kpp_1: kppgrp-1 {
+ fsl,pins = <
+ MX51_PAD_KEY_ROW0__KEY_ROW0 0xe0
+ MX51_PAD_KEY_ROW1__KEY_ROW1 0xe0
+ MX51_PAD_KEY_ROW2__KEY_ROW2 0xe0
+ MX51_PAD_KEY_ROW3__KEY_ROW3 0xe0
+ MX51_PAD_KEY_COL0__KEY_COL0 0xe8
+ MX51_PAD_KEY_COL1__KEY_COL1 0xe8
+ MX51_PAD_KEY_COL2__KEY_COL2 0xe8
+ MX51_PAD_KEY_COL3__KEY_COL3 0xe8
+ >;
+ };
+ };
+
+ pata {
+ pinctrl_pata_1: patagrp-1 {
+ fsl,pins = <
+ MX51_PAD_NANDF_WE_B__PATA_DIOW 0x2004
+ MX51_PAD_NANDF_RE_B__PATA_DIOR 0x2004
+ MX51_PAD_NANDF_ALE__PATA_BUFFER_EN 0x2004
+ MX51_PAD_NANDF_CLE__PATA_RESET_B 0x2004
+ MX51_PAD_NANDF_WP_B__PATA_DMACK 0x2004
+ MX51_PAD_NANDF_RB0__PATA_DMARQ 0x2004
+ MX51_PAD_NANDF_RB1__PATA_IORDY 0x2004
+ MX51_PAD_GPIO_NAND__PATA_INTRQ 0x2004
+ MX51_PAD_NANDF_CS2__PATA_CS_0 0x2004
+ MX51_PAD_NANDF_CS3__PATA_CS_1 0x2004
+ MX51_PAD_NANDF_CS4__PATA_DA_0 0x2004
+ MX51_PAD_NANDF_CS5__PATA_DA_1 0x2004
+ MX51_PAD_NANDF_CS6__PATA_DA_2 0x2004
+ MX51_PAD_NANDF_D15__PATA_DATA15 0x2004
+ MX51_PAD_NANDF_D14__PATA_DATA14 0x2004
+ MX51_PAD_NANDF_D13__PATA_DATA13 0x2004
+ MX51_PAD_NANDF_D12__PATA_DATA12 0x2004
+ MX51_PAD_NANDF_D11__PATA_DATA11 0x2004
+ MX51_PAD_NANDF_D10__PATA_DATA10 0x2004
+ MX51_PAD_NANDF_D9__PATA_DATA9 0x2004
+ MX51_PAD_NANDF_D8__PATA_DATA8 0x2004
+ MX51_PAD_NANDF_D7__PATA_DATA7 0x2004
+ MX51_PAD_NANDF_D6__PATA_DATA6 0x2004
+ MX51_PAD_NANDF_D5__PATA_DATA5 0x2004
+ MX51_PAD_NANDF_D4__PATA_DATA4 0x2004
+ MX51_PAD_NANDF_D3__PATA_DATA3 0x2004
+ MX51_PAD_NANDF_D2__PATA_DATA2 0x2004
+ MX51_PAD_NANDF_D1__PATA_DATA1 0x2004
+ MX51_PAD_NANDF_D0__PATA_DATA0 0x2004
+ >;
+ };
+ };
+
+ uart1 {
+ pinctrl_uart1_1: uart1grp-1 {
+ fsl,pins = <
+ MX51_PAD_UART1_RXD__UART1_RXD 0x1c5
+ MX51_PAD_UART1_TXD__UART1_TXD 0x1c5
+ MX51_PAD_UART1_RTS__UART1_RTS 0x1c5
+ MX51_PAD_UART1_CTS__UART1_CTS 0x1c5
+ >;
+ };
+ };
+
+ uart2 {
+ pinctrl_uart2_1: uart2grp-1 {
+ fsl,pins = <
+ MX51_PAD_UART2_RXD__UART2_RXD 0x1c5
+ MX51_PAD_UART2_TXD__UART2_TXD 0x1c5
+ >;
+ };
+ };
+
+ uart3 {
+ pinctrl_uart3_1: uart3grp-1 {
+ fsl,pins = <
+ MX51_PAD_EIM_D25__UART3_RXD 0x1c5
+ MX51_PAD_EIM_D26__UART3_TXD 0x1c5
+ MX51_PAD_EIM_D27__UART3_RTS 0x1c5
+ MX51_PAD_EIM_D24__UART3_CTS 0x1c5
+ >;
+ };
+
+ pinctrl_uart3_2: uart3grp-2 {
+ fsl,pins = <
+ MX51_PAD_UART3_RXD__UART3_RXD 0x1c5
+ MX51_PAD_UART3_TXD__UART3_TXD 0x1c5
+ >;
+ };
+ };
+
+ usbh1 {
+ pinctrl_usbh1_1: usbh1grp-1 {
+ fsl,pins = <
+ MX51_PAD_USBH1_DATA0__USBH1_DATA0 0x1e5
+ MX51_PAD_USBH1_DATA1__USBH1_DATA1 0x1e5
+ MX51_PAD_USBH1_DATA2__USBH1_DATA2 0x1e5
+ MX51_PAD_USBH1_DATA3__USBH1_DATA3 0x1e5
+ MX51_PAD_USBH1_DATA4__USBH1_DATA4 0x1e5
+ MX51_PAD_USBH1_DATA5__USBH1_DATA5 0x1e5
+ MX51_PAD_USBH1_DATA6__USBH1_DATA6 0x1e5
+ MX51_PAD_USBH1_DATA7__USBH1_DATA7 0x1e5
+ MX51_PAD_USBH1_CLK__USBH1_CLK 0x1e5
+ MX51_PAD_USBH1_DIR__USBH1_DIR 0x1e5
+ MX51_PAD_USBH1_NXT__USBH1_NXT 0x1e5
+ MX51_PAD_USBH1_STP__USBH1_STP 0x1e5
+ >;
+ };
+ };
+
+ usbh2 {
+ pinctrl_usbh2_1: usbh2grp-1 {
+ fsl,pins = <
+ MX51_PAD_EIM_D16__USBH2_DATA0 0x1e5
+ MX51_PAD_EIM_D17__USBH2_DATA1 0x1e5
+ MX51_PAD_EIM_D18__USBH2_DATA2 0x1e5
+ MX51_PAD_EIM_D19__USBH2_DATA3 0x1e5
+ MX51_PAD_EIM_D20__USBH2_DATA4 0x1e5
+ MX51_PAD_EIM_D21__USBH2_DATA5 0x1e5
+ MX51_PAD_EIM_D22__USBH2_DATA6 0x1e5
+ MX51_PAD_EIM_D23__USBH2_DATA7 0x1e5
+ MX51_PAD_EIM_A24__USBH2_CLK 0x1e5
+ MX51_PAD_EIM_A25__USBH2_DIR 0x1e5
+ MX51_PAD_EIM_A27__USBH2_NXT 0x1e5
+ MX51_PAD_EIM_A26__USBH2_STP 0x1e5
+ >;
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/imx53-qsb.dts b/arch/arm/boot/dts/imx53-qsb.dts
index 512a1f6..e97ddae 100644
--- a/arch/arm/boot/dts/imx53-qsb.dts
+++ b/arch/arm/boot/dts/imx53-qsb.dts
@@ -93,6 +93,15 @@
regulator-max-microvolt = <3200000>;
regulator-always-on;
};
+
+ reg_usb_vbus: usb_vbus {
+ compatible = "regulator-fixed";
+ regulator-name = "usb_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio7 8 0>;
+ enable-active-high;
+ };
};
sound {
@@ -145,6 +154,7 @@
MX53_PAD_EIM_DA12__GPIO3_12 0x80000000
MX53_PAD_EIM_DA13__GPIO3_13 0x80000000
MX53_PAD_PATA_DA_0__GPIO7_6 0x80000000
+ MX53_PAD_PATA_DA_2__GPIO7_8 0x80000000
MX53_PAD_GPIO_16__GPIO7_11 0x80000000
>;
};
@@ -297,8 +307,14 @@
status = "okay";
};
+&vpu {
+ status = "okay";
+};
+
&usbh1 {
- status = "okay";
+ vbus-supply = <®_usb_vbus>;
+ phy_type = "utmi";
+ status = "okay";
};
&usbotg {
diff --git a/arch/arm/boot/dts/imx53.dtsi b/arch/arm/boot/dts/imx53.dtsi
index 569aa9f..4307e80 100644
--- a/arch/arm/boot/dts/imx53.dtsi
+++ b/arch/arm/boot/dts/imx53.dtsi
@@ -15,11 +15,6 @@
/ {
aliases {
- serial0 = &uart1;
- serial1 = &uart2;
- serial2 = &uart3;
- serial3 = &uart4;
- serial4 = &uart5;
gpio0 = &gpio1;
gpio1 = &gpio2;
gpio2 = &gpio3;
@@ -30,6 +25,24 @@
i2c0 = &i2c1;
i2c1 = &i2c2;
i2c2 = &i2c3;
+ serial0 = &uart1;
+ serial1 = &uart2;
+ serial2 = &uart3;
+ serial3 = &uart4;
+ serial4 = &uart5;
+ spi0 = &ecspi1;
+ spi1 = &ecspi2;
+ spi2 = &cspi;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a8";
+ reg = <0x0>;
+ };
};
tzic: tz-interrupt-controller@0fffc000 {
@@ -140,6 +153,9 @@
reg = <0x50014000 0x4000>;
interrupts = <30>;
clocks = <&clks 49>;
+ dmas = <&sdma 24 1 0>,
+ <&sdma 25 1 0>;
+ dma-names = "rx", "tx";
fsl,fifo-depth = <15>;
fsl,ssi-dma-events = <25 24 23 22>; /* TX0 RX0 TX1 RX1 */
status = "disabled";
@@ -957,6 +973,13 @@
reg = <0x60000000 0x10000000>;
ranges;
+ iim: iim@63f98000 {
+ compatible = "fsl,imx53-iim", "fsl,imx27-iim";
+ reg = <0x63f98000 0x4000>;
+ interrupts = <69>;
+ clocks = <&clks 107>;
+ };
+
uart5: serial@63f90000 {
compatible = "fsl,imx53-uart", "fsl,imx21-uart";
reg = <0x63f90000 0x4000>;
@@ -990,6 +1013,7 @@
interrupts = <6>;
clocks = <&clks 56>, <&clks 56>;
clock-names = "ipg", "ahb";
+ #dma-cells = <3>;
fsl,sdma-ram-script-name = "imx/sdma/sdma-imx53.bin";
};
@@ -1029,6 +1053,9 @@
reg = <0x63fcc000 0x4000>;
interrupts = <29>;
clocks = <&clks 48>;
+ dmas = <&sdma 28 0 0>,
+ <&sdma 29 0 0>;
+ dma-names = "rx", "tx";
fsl,fifo-depth = <15>;
fsl,ssi-dma-events = <29 28 27 26>; /* TX0 RX0 TX1 RX1 */
status = "disabled";
@@ -1053,6 +1080,9 @@
reg = <0x63fe8000 0x4000>;
interrupts = <96>;
clocks = <&clks 50>;
+ dmas = <&sdma 46 0 0>,
+ <&sdma 47 0 0>;
+ dma-names = "rx", "tx";
fsl,fifo-depth = <15>;
fsl,ssi-dma-events = <47 46 45 44>; /* TX0 RX0 TX1 RX1 */
status = "disabled";
@@ -1076,6 +1106,22 @@
crtcs = <&ipu 1>;
status = "disabled";
};
+
+ vpu: vpu@63ff4000 {
+ compatible = "fsl,imx53-vpu";
+ reg = <0x63ff4000 0x1000>;
+ interrupts = <9>;
+ clocks = <&clks 63>, <&clks 63>;
+ clock-names = "per", "ahb";
+ iram = <&ocram>;
+ status = "disabled";
+ };
+ };
+
+ ocram: sram@f8000000 {
+ compatible = "mmio-sram";
+ reg = <0xf8000000 0x20000>;
+ clocks = <&clks 186>;
};
};
};
diff --git a/arch/arm/boot/dts/imx6dl-pinfunc.h b/arch/arm/boot/dts/imx6dl-pinfunc.h
index 9aab950..b81a7a4e 100644
--- a/arch/arm/boot/dts/imx6dl-pinfunc.h
+++ b/arch/arm/boot/dts/imx6dl-pinfunc.h
@@ -14,1072 +14,1076 @@
* The pin function ID is a tuple of
* <mux_reg conf_reg input_reg mux_mode input_val>
*/
-#define MX6DL_PAD_CSI0_DAT10__IPU1_CSI0_DATA10 0x04c 0x360 0x000 0x0 0x0
-#define MX6DL_PAD_CSI0_DAT10__AUD3_RXC 0x04c 0x360 0x000 0x1 0x0
-#define MX6DL_PAD_CSI0_DAT10__ECSPI2_MISO 0x04c 0x360 0x7f8 0x2 0x0
-#define MX6DL_PAD_CSI0_DAT10__UART1_TX_DATA 0x04c 0x360 0x000 0x3 0x0
-#define MX6DL_PAD_CSI0_DAT10__UART1_RX_DATA 0x04c 0x360 0x8fc 0x3 0x0
-#define MX6DL_PAD_CSI0_DAT10__GPIO5_IO28 0x04c 0x360 0x000 0x5 0x0
-#define MX6DL_PAD_CSI0_DAT10__ARM_TRACE07 0x04c 0x360 0x000 0x7 0x0
-#define MX6DL_PAD_CSI0_DAT11__IPU1_CSI0_DATA11 0x050 0x364 0x000 0x0 0x0
-#define MX6DL_PAD_CSI0_DAT11__AUD3_RXFS 0x050 0x364 0x000 0x1 0x0
-#define MX6DL_PAD_CSI0_DAT11__ECSPI2_SS0 0x050 0x364 0x800 0x2 0x0
-#define MX6DL_PAD_CSI0_DAT11__UART1_RX_DATA 0x050 0x364 0x8fc 0x3 0x1
-#define MX6DL_PAD_CSI0_DAT11__UART1_TX_DATA 0x050 0x364 0x000 0x3 0x0
-#define MX6DL_PAD_CSI0_DAT11__GPIO5_IO29 0x050 0x364 0x000 0x5 0x0
-#define MX6DL_PAD_CSI0_DAT11__ARM_TRACE08 0x050 0x364 0x000 0x7 0x0
-#define MX6DL_PAD_CSI0_DAT12__IPU1_CSI0_DATA12 0x054 0x368 0x000 0x0 0x0
-#define MX6DL_PAD_CSI0_DAT12__EIM_DATA08 0x054 0x368 0x000 0x1 0x0
-#define MX6DL_PAD_CSI0_DAT12__UART4_TX_DATA 0x054 0x368 0x000 0x3 0x0
-#define MX6DL_PAD_CSI0_DAT12__UART4_RX_DATA 0x054 0x368 0x914 0x3 0x0
-#define MX6DL_PAD_CSI0_DAT12__GPIO5_IO30 0x054 0x368 0x000 0x5 0x0
-#define MX6DL_PAD_CSI0_DAT12__ARM_TRACE09 0x054 0x368 0x000 0x7 0x0
-#define MX6DL_PAD_CSI0_DAT13__IPU1_CSI0_DATA13 0x058 0x36c 0x000 0x0 0x0
-#define MX6DL_PAD_CSI0_DAT13__EIM_DATA09 0x058 0x36c 0x000 0x1 0x0
-#define MX6DL_PAD_CSI0_DAT13__UART4_RX_DATA 0x058 0x36c 0x914 0x3 0x1
-#define MX6DL_PAD_CSI0_DAT13__UART4_TX_DATA 0x058 0x36c 0x000 0x3 0x0
-#define MX6DL_PAD_CSI0_DAT13__GPIO5_IO31 0x058 0x36c 0x000 0x5 0x0
-#define MX6DL_PAD_CSI0_DAT13__ARM_TRACE10 0x058 0x36c 0x000 0x7 0x0
-#define MX6DL_PAD_CSI0_DAT14__IPU1_CSI0_DATA14 0x05c 0x370 0x000 0x0 0x0
-#define MX6DL_PAD_CSI0_DAT14__EIM_DATA10 0x05c 0x370 0x000 0x1 0x0
-#define MX6DL_PAD_CSI0_DAT14__UART5_TX_DATA 0x05c 0x370 0x000 0x3 0x0
-#define MX6DL_PAD_CSI0_DAT14__UART5_RX_DATA 0x05c 0x370 0x91c 0x3 0x0
-#define MX6DL_PAD_CSI0_DAT14__GPIO6_IO00 0x05c 0x370 0x000 0x5 0x0
-#define MX6DL_PAD_CSI0_DAT14__ARM_TRACE11 0x05c 0x370 0x000 0x7 0x0
-#define MX6DL_PAD_CSI0_DAT15__IPU1_CSI0_DATA15 0x060 0x374 0x000 0x0 0x0
-#define MX6DL_PAD_CSI0_DAT15__EIM_DATA11 0x060 0x374 0x000 0x1 0x0
-#define MX6DL_PAD_CSI0_DAT15__UART5_RX_DATA 0x060 0x374 0x91c 0x3 0x1
-#define MX6DL_PAD_CSI0_DAT15__UART5_TX_DATA 0x060 0x374 0x000 0x3 0x0
-#define MX6DL_PAD_CSI0_DAT15__GPIO6_IO01 0x060 0x374 0x000 0x5 0x0
-#define MX6DL_PAD_CSI0_DAT15__ARM_TRACE12 0x060 0x374 0x000 0x7 0x0
-#define MX6DL_PAD_CSI0_DAT16__IPU1_CSI0_DATA16 0x064 0x378 0x000 0x0 0x0
-#define MX6DL_PAD_CSI0_DAT16__EIM_DATA12 0x064 0x378 0x000 0x1 0x0
-#define MX6DL_PAD_CSI0_DAT16__UART4_RTS_B 0x064 0x378 0x910 0x3 0x0
-#define MX6DL_PAD_CSI0_DAT16__UART4_CTS_B 0x064 0x378 0x000 0x3 0x0
-#define MX6DL_PAD_CSI0_DAT16__GPIO6_IO02 0x064 0x378 0x000 0x5 0x0
-#define MX6DL_PAD_CSI0_DAT16__ARM_TRACE13 0x064 0x378 0x000 0x7 0x0
-#define MX6DL_PAD_CSI0_DAT17__IPU1_CSI0_DATA17 0x068 0x37c 0x000 0x0 0x0
-#define MX6DL_PAD_CSI0_DAT17__EIM_DATA13 0x068 0x37c 0x000 0x1 0x0
-#define MX6DL_PAD_CSI0_DAT17__UART4_CTS_B 0x068 0x37c 0x000 0x3 0x0
-#define MX6DL_PAD_CSI0_DAT17__UART4_RTS_B 0x068 0x37c 0x910 0x3 0x1
-#define MX6DL_PAD_CSI0_DAT17__GPIO6_IO03 0x068 0x37c 0x000 0x5 0x0
-#define MX6DL_PAD_CSI0_DAT17__ARM_TRACE14 0x068 0x37c 0x000 0x7 0x0
-#define MX6DL_PAD_CSI0_DAT18__IPU1_CSI0_DATA18 0x06c 0x380 0x000 0x0 0x0
-#define MX6DL_PAD_CSI0_DAT18__EIM_DATA14 0x06c 0x380 0x000 0x1 0x0
-#define MX6DL_PAD_CSI0_DAT18__UART5_RTS_B 0x06c 0x380 0x918 0x3 0x0
-#define MX6DL_PAD_CSI0_DAT18__UART5_CTS_B 0x06c 0x380 0x000 0x3 0x0
-#define MX6DL_PAD_CSI0_DAT18__GPIO6_IO04 0x06c 0x380 0x000 0x5 0x0
-#define MX6DL_PAD_CSI0_DAT18__ARM_TRACE15 0x06c 0x380 0x000 0x7 0x0
-#define MX6DL_PAD_CSI0_DAT19__IPU1_CSI0_DATA19 0x070 0x384 0x000 0x0 0x0
-#define MX6DL_PAD_CSI0_DAT19__EIM_DATA15 0x070 0x384 0x000 0x1 0x0
-#define MX6DL_PAD_CSI0_DAT19__UART5_CTS_B 0x070 0x384 0x000 0x3 0x0
-#define MX6DL_PAD_CSI0_DAT19__UART5_RTS_B 0x070 0x384 0x918 0x3 0x1
-#define MX6DL_PAD_CSI0_DAT19__GPIO6_IO05 0x070 0x384 0x000 0x5 0x0
-#define MX6DL_PAD_CSI0_DAT4__IPU1_CSI0_DATA04 0x074 0x388 0x000 0x0 0x0
-#define MX6DL_PAD_CSI0_DAT4__EIM_DATA02 0x074 0x388 0x000 0x1 0x0
-#define MX6DL_PAD_CSI0_DAT4__ECSPI1_SCLK 0x074 0x388 0x7d8 0x2 0x0
-#define MX6DL_PAD_CSI0_DAT4__KEY_COL5 0x074 0x388 0x8c0 0x3 0x0
-#define MX6DL_PAD_CSI0_DAT4__AUD3_TXC 0x074 0x388 0x000 0x4 0x0
-#define MX6DL_PAD_CSI0_DAT4__GPIO5_IO22 0x074 0x388 0x000 0x5 0x0
-#define MX6DL_PAD_CSI0_DAT4__ARM_TRACE01 0x074 0x388 0x000 0x7 0x0
-#define MX6DL_PAD_CSI0_DAT5__IPU1_CSI0_DATA05 0x078 0x38c 0x000 0x0 0x0
-#define MX6DL_PAD_CSI0_DAT5__EIM_DATA03 0x078 0x38c 0x000 0x1 0x0
-#define MX6DL_PAD_CSI0_DAT5__ECSPI1_MOSI 0x078 0x38c 0x7e0 0x2 0x0
-#define MX6DL_PAD_CSI0_DAT5__KEY_ROW5 0x078 0x38c 0x8cc 0x3 0x0
-#define MX6DL_PAD_CSI0_DAT5__AUD3_TXD 0x078 0x38c 0x000 0x4 0x0
-#define MX6DL_PAD_CSI0_DAT5__GPIO5_IO23 0x078 0x38c 0x000 0x5 0x0
-#define MX6DL_PAD_CSI0_DAT5__ARM_TRACE02 0x078 0x38c 0x000 0x7 0x0
-#define MX6DL_PAD_CSI0_DAT6__IPU1_CSI0_DATA06 0x07c 0x390 0x000 0x0 0x0
-#define MX6DL_PAD_CSI0_DAT6__EIM_DATA04 0x07c 0x390 0x000 0x1 0x0
-#define MX6DL_PAD_CSI0_DAT6__ECSPI1_MISO 0x07c 0x390 0x7dc 0x2 0x0
-#define MX6DL_PAD_CSI0_DAT6__KEY_COL6 0x07c 0x390 0x8c4 0x3 0x0
-#define MX6DL_PAD_CSI0_DAT6__AUD3_TXFS 0x07c 0x390 0x000 0x4 0x0
-#define MX6DL_PAD_CSI0_DAT6__GPIO5_IO24 0x07c 0x390 0x000 0x5 0x0
-#define MX6DL_PAD_CSI0_DAT6__ARM_TRACE03 0x07c 0x390 0x000 0x7 0x0
-#define MX6DL_PAD_CSI0_DAT7__IPU1_CSI0_DATA07 0x080 0x394 0x000 0x0 0x0
-#define MX6DL_PAD_CSI0_DAT7__EIM_DATA05 0x080 0x394 0x000 0x1 0x0
-#define MX6DL_PAD_CSI0_DAT7__ECSPI1_SS0 0x080 0x394 0x7e4 0x2 0x0
-#define MX6DL_PAD_CSI0_DAT7__KEY_ROW6 0x080 0x394 0x8d0 0x3 0x0
-#define MX6DL_PAD_CSI0_DAT7__AUD3_RXD 0x080 0x394 0x000 0x4 0x0
-#define MX6DL_PAD_CSI0_DAT7__GPIO5_IO25 0x080 0x394 0x000 0x5 0x0
-#define MX6DL_PAD_CSI0_DAT7__ARM_TRACE04 0x080 0x394 0x000 0x7 0x0
-#define MX6DL_PAD_CSI0_DAT8__IPU1_CSI0_DATA08 0x084 0x398 0x000 0x0 0x0
-#define MX6DL_PAD_CSI0_DAT8__EIM_DATA06 0x084 0x398 0x000 0x1 0x0
-#define MX6DL_PAD_CSI0_DAT8__ECSPI2_SCLK 0x084 0x398 0x7f4 0x2 0x0
-#define MX6DL_PAD_CSI0_DAT8__KEY_COL7 0x084 0x398 0x8c8 0x3 0x0
-#define MX6DL_PAD_CSI0_DAT8__I2C1_SDA 0x084 0x398 0x86c 0x4 0x0
-#define MX6DL_PAD_CSI0_DAT8__GPIO5_IO26 0x084 0x398 0x000 0x5 0x0
-#define MX6DL_PAD_CSI0_DAT8__ARM_TRACE05 0x084 0x398 0x000 0x7 0x0
-#define MX6DL_PAD_CSI0_DAT9__IPU1_CSI0_DATA09 0x088 0x39c 0x000 0x0 0x0
-#define MX6DL_PAD_CSI0_DAT9__EIM_DATA07 0x088 0x39c 0x000 0x1 0x0
-#define MX6DL_PAD_CSI0_DAT9__ECSPI2_MOSI 0x088 0x39c 0x7fc 0x2 0x0
-#define MX6DL_PAD_CSI0_DAT9__KEY_ROW7 0x088 0x39c 0x8d4 0x3 0x0
-#define MX6DL_PAD_CSI0_DAT9__I2C1_SCL 0x088 0x39c 0x868 0x4 0x0
-#define MX6DL_PAD_CSI0_DAT9__GPIO5_IO27 0x088 0x39c 0x000 0x5 0x0
-#define MX6DL_PAD_CSI0_DAT9__ARM_TRACE06 0x088 0x39c 0x000 0x7 0x0
-#define MX6DL_PAD_CSI0_DATA_EN__IPU1_CSI0_DATA_EN 0x08c 0x3a0 0x000 0x0 0x0
-#define MX6DL_PAD_CSI0_DATA_EN__EIM_DATA00 0x08c 0x3a0 0x000 0x1 0x0
-#define MX6DL_PAD_CSI0_DATA_EN__GPIO5_IO20 0x08c 0x3a0 0x000 0x5 0x0
-#define MX6DL_PAD_CSI0_DATA_EN__ARM_TRACE_CLK 0x08c 0x3a0 0x000 0x7 0x0
-#define MX6DL_PAD_CSI0_MCLK__IPU1_CSI0_HSYNC 0x090 0x3a4 0x000 0x0 0x0
-#define MX6DL_PAD_CSI0_MCLK__CCM_CLKO1 0x090 0x3a4 0x000 0x3 0x0
-#define MX6DL_PAD_CSI0_MCLK__GPIO5_IO19 0x090 0x3a4 0x000 0x5 0x0
-#define MX6DL_PAD_CSI0_MCLK__ARM_TRACE_CTL 0x090 0x3a4 0x000 0x7 0x0
-#define MX6DL_PAD_CSI0_PIXCLK__IPU1_CSI0_PIXCLK 0x094 0x3a8 0x000 0x0 0x0
-#define MX6DL_PAD_CSI0_PIXCLK__GPIO5_IO18 0x094 0x3a8 0x000 0x5 0x0
-#define MX6DL_PAD_CSI0_PIXCLK__ARM_EVENTO 0x094 0x3a8 0x000 0x7 0x0
-#define MX6DL_PAD_CSI0_VSYNC__IPU1_CSI0_VSYNC 0x098 0x3ac 0x000 0x0 0x0
-#define MX6DL_PAD_CSI0_VSYNC__EIM_DATA01 0x098 0x3ac 0x000 0x1 0x0
-#define MX6DL_PAD_CSI0_VSYNC__GPIO5_IO21 0x098 0x3ac 0x000 0x5 0x0
-#define MX6DL_PAD_CSI0_VSYNC__ARM_TRACE00 0x098 0x3ac 0x000 0x7 0x0
-#define MX6DL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x09c 0x3b0 0x000 0x0 0x0
-#define MX6DL_PAD_DI0_DISP_CLK__LCD_CLK 0x09c 0x3b0 0x000 0x1 0x0
-#define MX6DL_PAD_DI0_DISP_CLK__GPIO4_IO16 0x09c 0x3b0 0x000 0x5 0x0
-#define MX6DL_PAD_DI0_DISP_CLK__LCD_WR_RWN 0x09c 0x3b0 0x000 0x8 0x0
-#define MX6DL_PAD_DI0_PIN15__IPU1_DI0_PIN15 0x0a0 0x3b4 0x000 0x0 0x0
-#define MX6DL_PAD_DI0_PIN15__LCD_ENABLE 0x0a0 0x3b4 0x000 0x1 0x0
-#define MX6DL_PAD_DI0_PIN15__AUD6_TXC 0x0a0 0x3b4 0x000 0x2 0x0
-#define MX6DL_PAD_DI0_PIN15__GPIO4_IO17 0x0a0 0x3b4 0x000 0x5 0x0
-#define MX6DL_PAD_DI0_PIN15__LCD_RD_E 0x0a0 0x3b4 0x000 0x8 0x0
-#define MX6DL_PAD_DI0_PIN2__IPU1_DI0_PIN02 0x0a4 0x3b8 0x000 0x0 0x0
-#define MX6DL_PAD_DI0_PIN2__LCD_HSYNC 0x0a4 0x3b8 0x8d8 0x1 0x0
-#define MX6DL_PAD_DI0_PIN2__AUD6_TXD 0x0a4 0x3b8 0x000 0x2 0x0
-#define MX6DL_PAD_DI0_PIN2__GPIO4_IO18 0x0a4 0x3b8 0x000 0x5 0x0
-#define MX6DL_PAD_DI0_PIN2__LCD_RS 0x0a4 0x3b8 0x000 0x8 0x0
-#define MX6DL_PAD_DI0_PIN3__IPU1_DI0_PIN03 0x0a8 0x3bc 0x000 0x0 0x0
-#define MX6DL_PAD_DI0_PIN3__LCD_VSYNC 0x0a8 0x3bc 0x000 0x1 0x0
-#define MX6DL_PAD_DI0_PIN3__AUD6_TXFS 0x0a8 0x3bc 0x000 0x2 0x0
-#define MX6DL_PAD_DI0_PIN3__GPIO4_IO19 0x0a8 0x3bc 0x000 0x5 0x0
-#define MX6DL_PAD_DI0_PIN3__LCD_CS 0x0a8 0x3bc 0x000 0x8 0x0
-#define MX6DL_PAD_DI0_PIN4__IPU1_DI0_PIN04 0x0ac 0x3c0 0x000 0x0 0x0
-#define MX6DL_PAD_DI0_PIN4__LCD_BUSY 0x0ac 0x3c0 0x8d8 0x1 0x1
-#define MX6DL_PAD_DI0_PIN4__AUD6_RXD 0x0ac 0x3c0 0x000 0x2 0x0
-#define MX6DL_PAD_DI0_PIN4__SD1_WP 0x0ac 0x3c0 0x92c 0x3 0x0
-#define MX6DL_PAD_DI0_PIN4__GPIO4_IO20 0x0ac 0x3c0 0x000 0x5 0x0
-#define MX6DL_PAD_DI0_PIN4__LCD_RESET 0x0ac 0x3c0 0x000 0x8 0x0
-#define MX6DL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00 0x0b0 0x3c4 0x000 0x0 0x0
-#define MX6DL_PAD_DISP0_DAT0__LCD_DATA00 0x0b0 0x3c4 0x000 0x1 0x0
-#define MX6DL_PAD_DISP0_DAT0__ECSPI3_SCLK 0x0b0 0x3c4 0x000 0x2 0x0
-#define MX6DL_PAD_DISP0_DAT0__GPIO4_IO21 0x0b0 0x3c4 0x000 0x5 0x0
-#define MX6DL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01 0x0b4 0x3c8 0x000 0x0 0x0
-#define MX6DL_PAD_DISP0_DAT1__LCD_DATA01 0x0b4 0x3c8 0x000 0x1 0x0
-#define MX6DL_PAD_DISP0_DAT1__ECSPI3_MOSI 0x0b4 0x3c8 0x000 0x2 0x0
-#define MX6DL_PAD_DISP0_DAT1__GPIO4_IO22 0x0b4 0x3c8 0x000 0x5 0x0
-#define MX6DL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10 0x0b8 0x3cc 0x000 0x0 0x0
-#define MX6DL_PAD_DISP0_DAT10__LCD_DATA10 0x0b8 0x3cc 0x000 0x1 0x0
-#define MX6DL_PAD_DISP0_DAT10__GPIO4_IO31 0x0b8 0x3cc 0x000 0x5 0x0
-#define MX6DL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11 0x0bc 0x3d0 0x000 0x0 0x0
-#define MX6DL_PAD_DISP0_DAT11__LCD_DATA11 0x0bc 0x3d0 0x000 0x1 0x0
-#define MX6DL_PAD_DISP0_DAT11__GPIO5_IO05 0x0bc 0x3d0 0x000 0x5 0x0
-#define MX6DL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12 0x0c0 0x3d4 0x000 0x0 0x0
-#define MX6DL_PAD_DISP0_DAT12__LCD_DATA12 0x0c0 0x3d4 0x000 0x1 0x0
-#define MX6DL_PAD_DISP0_DAT12__GPIO5_IO06 0x0c0 0x3d4 0x000 0x5 0x0
-#define MX6DL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13 0x0c4 0x3d8 0x000 0x0 0x0
-#define MX6DL_PAD_DISP0_DAT13__LCD_DATA13 0x0c4 0x3d8 0x000 0x1 0x0
-#define MX6DL_PAD_DISP0_DAT13__AUD5_RXFS 0x0c4 0x3d8 0x7bc 0x3 0x0
-#define MX6DL_PAD_DISP0_DAT13__GPIO5_IO07 0x0c4 0x3d8 0x000 0x5 0x0
-#define MX6DL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14 0x0c8 0x3dc 0x000 0x0 0x0
-#define MX6DL_PAD_DISP0_DAT14__LCD_DATA14 0x0c8 0x3dc 0x000 0x1 0x0
-#define MX6DL_PAD_DISP0_DAT14__AUD5_RXC 0x0c8 0x3dc 0x7b8 0x3 0x0
-#define MX6DL_PAD_DISP0_DAT14__GPIO5_IO08 0x0c8 0x3dc 0x000 0x5 0x0
-#define MX6DL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15 0x0cc 0x3e0 0x000 0x0 0x0
-#define MX6DL_PAD_DISP0_DAT15__LCD_DATA15 0x0cc 0x3e0 0x000 0x1 0x0
-#define MX6DL_PAD_DISP0_DAT15__ECSPI1_SS1 0x0cc 0x3e0 0x7e8 0x2 0x0
-#define MX6DL_PAD_DISP0_DAT15__ECSPI2_SS1 0x0cc 0x3e0 0x804 0x3 0x0
-#define MX6DL_PAD_DISP0_DAT15__GPIO5_IO09 0x0cc 0x3e0 0x000 0x5 0x0
-#define MX6DL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16 0x0d0 0x3e4 0x000 0x0 0x0
-#define MX6DL_PAD_DISP0_DAT16__LCD_DATA16 0x0d0 0x3e4 0x000 0x1 0x0
-#define MX6DL_PAD_DISP0_DAT16__ECSPI2_MOSI 0x0d0 0x3e4 0x7fc 0x2 0x1
-#define MX6DL_PAD_DISP0_DAT16__AUD5_TXC 0x0d0 0x3e4 0x7c0 0x3 0x0
-#define MX6DL_PAD_DISP0_DAT16__SDMA_EXT_EVENT0 0x0d0 0x3e4 0x8e8 0x4 0x0
-#define MX6DL_PAD_DISP0_DAT16__GPIO5_IO10 0x0d0 0x3e4 0x000 0x5 0x0
-#define MX6DL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17 0x0d4 0x3e8 0x000 0x0 0x0
-#define MX6DL_PAD_DISP0_DAT17__LCD_DATA17 0x0d4 0x3e8 0x000 0x1 0x0
-#define MX6DL_PAD_DISP0_DAT17__ECSPI2_MISO 0x0d4 0x3e8 0x7f8 0x2 0x1
-#define MX6DL_PAD_DISP0_DAT17__AUD5_TXD 0x0d4 0x3e8 0x7b4 0x3 0x0
-#define MX6DL_PAD_DISP0_DAT17__SDMA_EXT_EVENT1 0x0d4 0x3e8 0x8ec 0x4 0x0
-#define MX6DL_PAD_DISP0_DAT17__GPIO5_IO11 0x0d4 0x3e8 0x000 0x5 0x0
-#define MX6DL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18 0x0d8 0x3ec 0x000 0x0 0x0
-#define MX6DL_PAD_DISP0_DAT18__LCD_DATA18 0x0d8 0x3ec 0x000 0x1 0x0
-#define MX6DL_PAD_DISP0_DAT18__ECSPI2_SS0 0x0d8 0x3ec 0x800 0x2 0x1
-#define MX6DL_PAD_DISP0_DAT18__AUD5_TXFS 0x0d8 0x3ec 0x7c4 0x3 0x0
-#define MX6DL_PAD_DISP0_DAT18__AUD4_RXFS 0x0d8 0x3ec 0x7a4 0x4 0x0
-#define MX6DL_PAD_DISP0_DAT18__GPIO5_IO12 0x0d8 0x3ec 0x000 0x5 0x0
-#define MX6DL_PAD_DISP0_DAT18__EIM_CS2_B 0x0d8 0x3ec 0x000 0x7 0x0
-#define MX6DL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19 0x0dc 0x3f0 0x000 0x0 0x0
-#define MX6DL_PAD_DISP0_DAT19__LCD_DATA19 0x0dc 0x3f0 0x000 0x1 0x0
-#define MX6DL_PAD_DISP0_DAT19__ECSPI2_SCLK 0x0dc 0x3f0 0x7f4 0x2 0x1
-#define MX6DL_PAD_DISP0_DAT19__AUD5_RXD 0x0dc 0x3f0 0x7b0 0x3 0x0
-#define MX6DL_PAD_DISP0_DAT19__AUD4_RXC 0x0dc 0x3f0 0x7a0 0x4 0x0
-#define MX6DL_PAD_DISP0_DAT19__GPIO5_IO13 0x0dc 0x3f0 0x000 0x5 0x0
-#define MX6DL_PAD_DISP0_DAT19__EIM_CS3_B 0x0dc 0x3f0 0x000 0x7 0x0
-#define MX6DL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02 0x0e0 0x3f4 0x000 0x0 0x0
-#define MX6DL_PAD_DISP0_DAT2__LCD_DATA02 0x0e0 0x3f4 0x000 0x1 0x0
-#define MX6DL_PAD_DISP0_DAT2__ECSPI3_MISO 0x0e0 0x3f4 0x000 0x2 0x0
-#define MX6DL_PAD_DISP0_DAT2__GPIO4_IO23 0x0e0 0x3f4 0x000 0x5 0x0
-#define MX6DL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20 0x0e4 0x3f8 0x000 0x0 0x0
-#define MX6DL_PAD_DISP0_DAT20__LCD_DATA20 0x0e4 0x3f8 0x000 0x1 0x0
-#define MX6DL_PAD_DISP0_DAT20__ECSPI1_SCLK 0x0e4 0x3f8 0x7d8 0x2 0x1
-#define MX6DL_PAD_DISP0_DAT20__AUD4_TXC 0x0e4 0x3f8 0x7a8 0x3 0x0
-#define MX6DL_PAD_DISP0_DAT20__GPIO5_IO14 0x0e4 0x3f8 0x000 0x5 0x0
-#define MX6DL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21 0x0e8 0x3fc 0x000 0x0 0x0
-#define MX6DL_PAD_DISP0_DAT21__LCD_DATA21 0x0e8 0x3fc 0x000 0x1 0x0
-#define MX6DL_PAD_DISP0_DAT21__ECSPI1_MOSI 0x0e8 0x3fc 0x7e0 0x2 0x1
-#define MX6DL_PAD_DISP0_DAT21__AUD4_TXD 0x0e8 0x3fc 0x79c 0x3 0x0
-#define MX6DL_PAD_DISP0_DAT21__GPIO5_IO15 0x0e8 0x3fc 0x000 0x5 0x0
-#define MX6DL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22 0x0ec 0x400 0x000 0x0 0x0
-#define MX6DL_PAD_DISP0_DAT22__LCD_DATA22 0x0ec 0x400 0x000 0x1 0x0
-#define MX6DL_PAD_DISP0_DAT22__ECSPI1_MISO 0x0ec 0x400 0x7dc 0x2 0x1
-#define MX6DL_PAD_DISP0_DAT22__AUD4_TXFS 0x0ec 0x400 0x7ac 0x3 0x0
-#define MX6DL_PAD_DISP0_DAT22__GPIO5_IO16 0x0ec 0x400 0x000 0x5 0x0
-#define MX6DL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23 0x0f0 0x404 0x000 0x0 0x0
-#define MX6DL_PAD_DISP0_DAT23__LCD_DATA23 0x0f0 0x404 0x000 0x1 0x0
-#define MX6DL_PAD_DISP0_DAT23__ECSPI1_SS0 0x0f0 0x404 0x7e4 0x2 0x1
-#define MX6DL_PAD_DISP0_DAT23__AUD4_RXD 0x0f0 0x404 0x798 0x3 0x0
-#define MX6DL_PAD_DISP0_DAT23__GPIO5_IO17 0x0f0 0x404 0x000 0x5 0x0
-#define MX6DL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03 0x0f4 0x408 0x000 0x0 0x0
-#define MX6DL_PAD_DISP0_DAT3__LCD_DATA03 0x0f4 0x408 0x000 0x1 0x0
-#define MX6DL_PAD_DISP0_DAT3__ECSPI3_SS0 0x0f4 0x408 0x000 0x2 0x0
-#define MX6DL_PAD_DISP0_DAT3__GPIO4_IO24 0x0f4 0x408 0x000 0x5 0x0
-#define MX6DL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04 0x0f8 0x40c 0x000 0x0 0x0
-#define MX6DL_PAD_DISP0_DAT4__LCD_DATA04 0x0f8 0x40c 0x000 0x1 0x0
-#define MX6DL_PAD_DISP0_DAT4__ECSPI3_SS1 0x0f8 0x40c 0x000 0x2 0x0
-#define MX6DL_PAD_DISP0_DAT4__GPIO4_IO25 0x0f8 0x40c 0x000 0x5 0x0
-#define MX6DL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05 0x0fc 0x410 0x000 0x0 0x0
-#define MX6DL_PAD_DISP0_DAT5__LCD_DATA05 0x0fc 0x410 0x000 0x1 0x0
-#define MX6DL_PAD_DISP0_DAT5__ECSPI3_SS2 0x0fc 0x410 0x000 0x2 0x0
-#define MX6DL_PAD_DISP0_DAT5__AUD6_RXFS 0x0fc 0x410 0x000 0x3 0x0
-#define MX6DL_PAD_DISP0_DAT5__GPIO4_IO26 0x0fc 0x410 0x000 0x5 0x0
-#define MX6DL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06 0x100 0x414 0x000 0x0 0x0
-#define MX6DL_PAD_DISP0_DAT6__LCD_DATA06 0x100 0x414 0x000 0x1 0x0
-#define MX6DL_PAD_DISP0_DAT6__ECSPI3_SS3 0x100 0x414 0x000 0x2 0x0
-#define MX6DL_PAD_DISP0_DAT6__AUD6_RXC 0x100 0x414 0x000 0x3 0x0
-#define MX6DL_PAD_DISP0_DAT6__GPIO4_IO27 0x100 0x414 0x000 0x5 0x0
-#define MX6DL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07 0x104 0x418 0x000 0x0 0x0
-#define MX6DL_PAD_DISP0_DAT7__LCD_DATA07 0x104 0x418 0x000 0x1 0x0
-#define MX6DL_PAD_DISP0_DAT7__ECSPI3_RDY 0x104 0x418 0x000 0x2 0x0
-#define MX6DL_PAD_DISP0_DAT7__GPIO4_IO28 0x104 0x418 0x000 0x5 0x0
-#define MX6DL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08 0x108 0x41c 0x000 0x0 0x0
-#define MX6DL_PAD_DISP0_DAT8__LCD_DATA08 0x108 0x41c 0x000 0x1 0x0
-#define MX6DL_PAD_DISP0_DAT8__PWM1_OUT 0x108 0x41c 0x000 0x2 0x0
-#define MX6DL_PAD_DISP0_DAT8__WDOG1_B 0x108 0x41c 0x000 0x3 0x0
-#define MX6DL_PAD_DISP0_DAT8__GPIO4_IO29 0x108 0x41c 0x000 0x5 0x0
-#define MX6DL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09 0x10c 0x420 0x000 0x0 0x0
-#define MX6DL_PAD_DISP0_DAT9__LCD_DATA09 0x10c 0x420 0x000 0x1 0x0
-#define MX6DL_PAD_DISP0_DAT9__PWM2_OUT 0x10c 0x420 0x000 0x2 0x0
-#define MX6DL_PAD_DISP0_DAT9__WDOG2_B 0x10c 0x420 0x000 0x3 0x0
-#define MX6DL_PAD_DISP0_DAT9__GPIO4_IO30 0x10c 0x420 0x000 0x5 0x0
-#define MX6DL_PAD_EIM_A16__EIM_ADDR16 0x110 0x4e0 0x000 0x0 0x0
-#define MX6DL_PAD_EIM_A16__IPU1_DI1_DISP_CLK 0x110 0x4e0 0x000 0x1 0x0
-#define MX6DL_PAD_EIM_A16__IPU1_CSI1_PIXCLK 0x110 0x4e0 0x8b8 0x2 0x0
-#define MX6DL_PAD_EIM_A16__GPIO2_IO22 0x110 0x4e0 0x000 0x5 0x0
-#define MX6DL_PAD_EIM_A16__SRC_BOOT_CFG16 0x110 0x4e0 0x000 0x7 0x0
-#define MX6DL_PAD_EIM_A16__EPDC_DATA00 0x110 0x4e0 0x000 0x8 0x0
-#define MX6DL_PAD_EIM_A17__EIM_ADDR17 0x114 0x4e4 0x000 0x0 0x0
-#define MX6DL_PAD_EIM_A17__IPU1_DISP1_DATA12 0x114 0x4e4 0x000 0x1 0x0
-#define MX6DL_PAD_EIM_A17__IPU1_CSI1_DATA12 0x114 0x4e4 0x890 0x2 0x0
-#define MX6DL_PAD_EIM_A17__GPIO2_IO21 0x114 0x4e4 0x000 0x5 0x0
-#define MX6DL_PAD_EIM_A17__SRC_BOOT_CFG17 0x114 0x4e4 0x000 0x7 0x0
-#define MX6DL_PAD_EIM_A17__EPDC_PWR_STAT 0x114 0x4e4 0x000 0x8 0x0
-#define MX6DL_PAD_EIM_A18__EIM_ADDR18 0x118 0x4e8 0x000 0x0 0x0
-#define MX6DL_PAD_EIM_A18__IPU1_DISP1_DATA13 0x118 0x4e8 0x000 0x1 0x0
-#define MX6DL_PAD_EIM_A18__IPU1_CSI1_DATA13 0x118 0x4e8 0x894 0x2 0x0
-#define MX6DL_PAD_EIM_A18__GPIO2_IO20 0x118 0x4e8 0x000 0x5 0x0
-#define MX6DL_PAD_EIM_A18__SRC_BOOT_CFG18 0x118 0x4e8 0x000 0x7 0x0
-#define MX6DL_PAD_EIM_A18__EPDC_PWR_CTRL0 0x118 0x4e8 0x000 0x8 0x0
-#define MX6DL_PAD_EIM_A19__EIM_ADDR19 0x11c 0x4ec 0x000 0x0 0x0
-#define MX6DL_PAD_EIM_A19__IPU1_DISP1_DATA14 0x11c 0x4ec 0x000 0x1 0x0
-#define MX6DL_PAD_EIM_A19__IPU1_CSI1_DATA14 0x11c 0x4ec 0x898 0x2 0x0
-#define MX6DL_PAD_EIM_A19__GPIO2_IO19 0x11c 0x4ec 0x000 0x5 0x0
-#define MX6DL_PAD_EIM_A19__SRC_BOOT_CFG19 0x11c 0x4ec 0x000 0x7 0x0
-#define MX6DL_PAD_EIM_A19__EPDC_PWR_CTRL1 0x11c 0x4ec 0x000 0x8 0x0
-#define MX6DL_PAD_EIM_A20__EIM_ADDR20 0x120 0x4f0 0x000 0x0 0x0
-#define MX6DL_PAD_EIM_A20__IPU1_DISP1_DATA15 0x120 0x4f0 0x000 0x1 0x0
-#define MX6DL_PAD_EIM_A20__IPU1_CSI1_DATA15 0x120 0x4f0 0x89c 0x2 0x0
-#define MX6DL_PAD_EIM_A20__GPIO2_IO18 0x120 0x4f0 0x000 0x5 0x0
-#define MX6DL_PAD_EIM_A20__SRC_BOOT_CFG20 0x120 0x4f0 0x000 0x7 0x0
-#define MX6DL_PAD_EIM_A20__EPDC_PWR_CTRL2 0x120 0x4f0 0x000 0x8 0x0
-#define MX6DL_PAD_EIM_A21__EIM_ADDR21 0x124 0x4f4 0x000 0x0 0x0
-#define MX6DL_PAD_EIM_A21__IPU1_DISP1_DATA16 0x124 0x4f4 0x000 0x1 0x0
-#define MX6DL_PAD_EIM_A21__IPU1_CSI1_DATA16 0x124 0x4f4 0x8a0 0x2 0x0
-#define MX6DL_PAD_EIM_A21__GPIO2_IO17 0x124 0x4f4 0x000 0x5 0x0
-#define MX6DL_PAD_EIM_A21__SRC_BOOT_CFG21 0x124 0x4f4 0x000 0x7 0x0
-#define MX6DL_PAD_EIM_A21__EPDC_GDCLK 0x124 0x4f4 0x000 0x8 0x0
-#define MX6DL_PAD_EIM_A22__EIM_ADDR22 0x128 0x4f8 0x000 0x0 0x0
-#define MX6DL_PAD_EIM_A22__IPU1_DISP1_DATA17 0x128 0x4f8 0x000 0x1 0x0
-#define MX6DL_PAD_EIM_A22__IPU1_CSI1_DATA17 0x128 0x4f8 0x8a4 0x2 0x0
-#define MX6DL_PAD_EIM_A22__GPIO2_IO16 0x128 0x4f8 0x000 0x5 0x0
-#define MX6DL_PAD_EIM_A22__SRC_BOOT_CFG22 0x128 0x4f8 0x000 0x7 0x0
-#define MX6DL_PAD_EIM_A22__EPDC_GDSP 0x128 0x4f8 0x000 0x8 0x0
-#define MX6DL_PAD_EIM_A23__EIM_ADDR23 0x12c 0x4fc 0x000 0x0 0x0
-#define MX6DL_PAD_EIM_A23__IPU1_DISP1_DATA18 0x12c 0x4fc 0x000 0x1 0x0
-#define MX6DL_PAD_EIM_A23__IPU1_CSI1_DATA18 0x12c 0x4fc 0x8a8 0x2 0x0
-#define MX6DL_PAD_EIM_A23__IPU1_SISG3 0x12c 0x4fc 0x000 0x4 0x0
-#define MX6DL_PAD_EIM_A23__GPIO6_IO06 0x12c 0x4fc 0x000 0x5 0x0
-#define MX6DL_PAD_EIM_A23__SRC_BOOT_CFG23 0x12c 0x4fc 0x000 0x7 0x0
-#define MX6DL_PAD_EIM_A23__EPDC_GDOE 0x12c 0x4fc 0x000 0x8 0x0
-#define MX6DL_PAD_EIM_A24__EIM_ADDR24 0x130 0x500 0x000 0x0 0x0
-#define MX6DL_PAD_EIM_A24__IPU1_DISP1_DATA19 0x130 0x500 0x000 0x1 0x0
-#define MX6DL_PAD_EIM_A24__IPU1_CSI1_DATA19 0x130 0x500 0x8ac 0x2 0x0
-#define MX6DL_PAD_EIM_A24__IPU1_SISG2 0x130 0x500 0x000 0x4 0x0
-#define MX6DL_PAD_EIM_A24__GPIO5_IO04 0x130 0x500 0x000 0x5 0x0
-#define MX6DL_PAD_EIM_A24__SRC_BOOT_CFG24 0x130 0x500 0x000 0x7 0x0
-#define MX6DL_PAD_EIM_A24__EPDC_GDRL 0x130 0x500 0x000 0x8 0x0
-#define MX6DL_PAD_EIM_A25__EIM_ADDR25 0x134 0x504 0x000 0x0 0x0
-#define MX6DL_PAD_EIM_A25__ECSPI4_SS1 0x134 0x504 0x000 0x1 0x0
-#define MX6DL_PAD_EIM_A25__ECSPI2_RDY 0x134 0x504 0x000 0x2 0x0
-#define MX6DL_PAD_EIM_A25__IPU1_DI1_PIN12 0x134 0x504 0x000 0x3 0x0
-#define MX6DL_PAD_EIM_A25__IPU1_DI0_D1_CS 0x134 0x504 0x000 0x4 0x0
-#define MX6DL_PAD_EIM_A25__GPIO5_IO02 0x134 0x504 0x000 0x5 0x0
-#define MX6DL_PAD_EIM_A25__HDMI_TX_CEC_LINE 0x134 0x504 0x85c 0x6 0x0
-#define MX6DL_PAD_EIM_A25__EPDC_DATA15 0x134 0x504 0x000 0x8 0x0
-#define MX6DL_PAD_EIM_A25__EIM_ACLK_FREERUN 0x134 0x504 0x000 0x9 0x0
-#define MX6DL_PAD_EIM_BCLK__EIM_BCLK 0x138 0x508 0x000 0x0 0x0
-#define MX6DL_PAD_EIM_BCLK__IPU1_DI1_PIN16 0x138 0x508 0x000 0x1 0x0
-#define MX6DL_PAD_EIM_BCLK__GPIO6_IO31 0x138 0x508 0x000 0x5 0x0
-#define MX6DL_PAD_EIM_BCLK__EPDC_SDCE9 0x138 0x508 0x000 0x8 0x0
-#define MX6DL_PAD_EIM_CS0__EIM_CS0_B 0x13c 0x50c 0x000 0x0 0x0
-#define MX6DL_PAD_EIM_CS0__IPU1_DI1_PIN05 0x13c 0x50c 0x000 0x1 0x0
-#define MX6DL_PAD_EIM_CS0__ECSPI2_SCLK 0x13c 0x50c 0x7f4 0x2 0x2
-#define MX6DL_PAD_EIM_CS0__GPIO2_IO23 0x13c 0x50c 0x000 0x5 0x0
-#define MX6DL_PAD_EIM_CS0__EPDC_DATA06 0x13c 0x50c 0x000 0x8 0x0
-#define MX6DL_PAD_EIM_CS1__EIM_CS1_B 0x140 0x510 0x000 0x0 0x0
-#define MX6DL_PAD_EIM_CS1__IPU1_DI1_PIN06 0x140 0x510 0x000 0x1 0x0
-#define MX6DL_PAD_EIM_CS1__ECSPI2_MOSI 0x140 0x510 0x7fc 0x2 0x2
-#define MX6DL_PAD_EIM_CS1__GPIO2_IO24 0x140 0x510 0x000 0x5 0x0
-#define MX6DL_PAD_EIM_CS1__EPDC_DATA08 0x140 0x510 0x000 0x8 0x0
-#define MX6DL_PAD_EIM_D16__EIM_DATA16 0x144 0x514 0x000 0x0 0x0
-#define MX6DL_PAD_EIM_D16__ECSPI1_SCLK 0x144 0x514 0x7d8 0x1 0x2
-#define MX6DL_PAD_EIM_D16__IPU1_DI0_PIN05 0x144 0x514 0x000 0x2 0x0
-#define MX6DL_PAD_EIM_D16__IPU1_CSI1_DATA18 0x144 0x514 0x8a8 0x3 0x1
-#define MX6DL_PAD_EIM_D16__HDMI_TX_DDC_SDA 0x144 0x514 0x864 0x4 0x0
-#define MX6DL_PAD_EIM_D16__GPIO3_IO16 0x144 0x514 0x000 0x5 0x0
-#define MX6DL_PAD_EIM_D16__I2C2_SDA 0x144 0x514 0x874 0x6 0x0
-#define MX6DL_PAD_EIM_D16__EPDC_DATA10 0x144 0x514 0x000 0x8 0x0
-#define MX6DL_PAD_EIM_D17__EIM_DATA17 0x148 0x518 0x000 0x0 0x0
-#define MX6DL_PAD_EIM_D17__ECSPI1_MISO 0x148 0x518 0x7dc 0x1 0x2
-#define MX6DL_PAD_EIM_D17__IPU1_DI0_PIN06 0x148 0x518 0x000 0x2 0x0
-#define MX6DL_PAD_EIM_D17__IPU1_CSI1_PIXCLK 0x148 0x518 0x8b8 0x3 0x1
-#define MX6DL_PAD_EIM_D17__DCIC1_OUT 0x148 0x518 0x000 0x4 0x0
-#define MX6DL_PAD_EIM_D17__GPIO3_IO17 0x148 0x518 0x000 0x5 0x0
-#define MX6DL_PAD_EIM_D17__I2C3_SCL 0x148 0x518 0x878 0x6 0x0
-#define MX6DL_PAD_EIM_D17__EPDC_VCOM0 0x148 0x518 0x000 0x8 0x0
-#define MX6DL_PAD_EIM_D18__EIM_DATA18 0x14c 0x51c 0x000 0x0 0x0
-#define MX6DL_PAD_EIM_D18__ECSPI1_MOSI 0x14c 0x51c 0x7e0 0x1 0x2
-#define MX6DL_PAD_EIM_D18__IPU1_DI0_PIN07 0x14c 0x51c 0x000 0x2 0x0
-#define MX6DL_PAD_EIM_D18__IPU1_CSI1_DATA17 0x14c 0x51c 0x8a4 0x3 0x1
-#define MX6DL_PAD_EIM_D18__IPU1_DI1_D0_CS 0x14c 0x51c 0x000 0x4 0x0
-#define MX6DL_PAD_EIM_D18__GPIO3_IO18 0x14c 0x51c 0x000 0x5 0x0
-#define MX6DL_PAD_EIM_D18__I2C3_SDA 0x14c 0x51c 0x87c 0x6 0x0
-#define MX6DL_PAD_EIM_D18__EPDC_VCOM1 0x14c 0x51c 0x000 0x8 0x0
-#define MX6DL_PAD_EIM_D19__EIM_DATA19 0x150 0x520 0x000 0x0 0x0
-#define MX6DL_PAD_EIM_D19__ECSPI1_SS1 0x150 0x520 0x7e8 0x1 0x1
-#define MX6DL_PAD_EIM_D19__IPU1_DI0_PIN08 0x150 0x520 0x000 0x2 0x0
-#define MX6DL_PAD_EIM_D19__IPU1_CSI1_DATA16 0x150 0x520 0x8a0 0x3 0x1
-#define MX6DL_PAD_EIM_D19__UART1_CTS_B 0x150 0x520 0x000 0x4 0x0
-#define MX6DL_PAD_EIM_D19__UART1_RTS_B 0x150 0x520 0x8f8 0x4 0x0
-#define MX6DL_PAD_EIM_D19__GPIO3_IO19 0x150 0x520 0x000 0x5 0x0
-#define MX6DL_PAD_EIM_D19__EPIT1_OUT 0x150 0x520 0x000 0x6 0x0
-#define MX6DL_PAD_EIM_D19__EPDC_DATA12 0x150 0x520 0x000 0x8 0x0
-#define MX6DL_PAD_EIM_D20__EIM_DATA20 0x154 0x524 0x000 0x0 0x0
-#define MX6DL_PAD_EIM_D20__ECSPI4_SS0 0x154 0x524 0x808 0x1 0x0
-#define MX6DL_PAD_EIM_D20__IPU1_DI0_PIN16 0x154 0x524 0x000 0x2 0x0
-#define MX6DL_PAD_EIM_D20__IPU1_CSI1_DATA15 0x154 0x524 0x89c 0x3 0x1
-#define MX6DL_PAD_EIM_D20__UART1_RTS_B 0x154 0x524 0x8f8 0x4 0x1
-#define MX6DL_PAD_EIM_D20__UART1_CTS_B 0x154 0x524 0x000 0x4 0x0
-#define MX6DL_PAD_EIM_D20__GPIO3_IO20 0x154 0x524 0x000 0x5 0x0
-#define MX6DL_PAD_EIM_D20__EPIT2_OUT 0x154 0x524 0x000 0x6 0x0
-#define MX6DL_PAD_EIM_D21__EIM_DATA21 0x158 0x528 0x000 0x0 0x0
-#define MX6DL_PAD_EIM_D21__ECSPI4_SCLK 0x158 0x528 0x000 0x1 0x0
-#define MX6DL_PAD_EIM_D21__IPU1_DI0_PIN17 0x158 0x528 0x000 0x2 0x0
-#define MX6DL_PAD_EIM_D21__IPU1_CSI1_DATA11 0x158 0x528 0x88c 0x3 0x0
-#define MX6DL_PAD_EIM_D21__USB_OTG_OC 0x158 0x528 0x920 0x4 0x0
-#define MX6DL_PAD_EIM_D21__GPIO3_IO21 0x158 0x528 0x000 0x5 0x0
-#define MX6DL_PAD_EIM_D21__I2C1_SCL 0x158 0x528 0x868 0x6 0x1
-#define MX6DL_PAD_EIM_D21__SPDIF_IN 0x158 0x528 0x8f0 0x7 0x0
-#define MX6DL_PAD_EIM_D22__EIM_DATA22 0x15c 0x52c 0x000 0x0 0x0
-#define MX6DL_PAD_EIM_D22__ECSPI4_MISO 0x15c 0x52c 0x000 0x1 0x0
-#define MX6DL_PAD_EIM_D22__IPU1_DI0_PIN01 0x15c 0x52c 0x000 0x2 0x0
-#define MX6DL_PAD_EIM_D22__IPU1_CSI1_DATA10 0x15c 0x52c 0x888 0x3 0x0
-#define MX6DL_PAD_EIM_D22__USB_OTG_PWR 0x15c 0x52c 0x000 0x4 0x0
-#define MX6DL_PAD_EIM_D22__GPIO3_IO22 0x15c 0x52c 0x000 0x5 0x0
-#define MX6DL_PAD_EIM_D22__SPDIF_OUT 0x15c 0x52c 0x000 0x6 0x0
-#define MX6DL_PAD_EIM_D22__EPDC_SDCE6 0x15c 0x52c 0x000 0x8 0x0
-#define MX6DL_PAD_EIM_D23__EIM_DATA23 0x160 0x530 0x000 0x0 0x0
-#define MX6DL_PAD_EIM_D23__IPU1_DI0_D0_CS 0x160 0x530 0x000 0x1 0x0
-#define MX6DL_PAD_EIM_D23__UART3_CTS_B 0x160 0x530 0x000 0x2 0x0
-#define MX6DL_PAD_EIM_D23__UART3_RTS_B 0x160 0x530 0x908 0x2 0x0
-#define MX6DL_PAD_EIM_D23__UART1_DCD_B 0x160 0x530 0x000 0x3 0x0
-#define MX6DL_PAD_EIM_D23__IPU1_CSI1_DATA_EN 0x160 0x530 0x8b0 0x4 0x0
-#define MX6DL_PAD_EIM_D23__GPIO3_IO23 0x160 0x530 0x000 0x5 0x0
-#define MX6DL_PAD_EIM_D23__IPU1_DI1_PIN02 0x160 0x530 0x000 0x6 0x0
-#define MX6DL_PAD_EIM_D23__IPU1_DI1_PIN14 0x160 0x530 0x000 0x7 0x0
-#define MX6DL_PAD_EIM_D23__EPDC_DATA11 0x160 0x530 0x000 0x8 0x0
-#define MX6DL_PAD_EIM_D24__EIM_DATA24 0x164 0x534 0x000 0x0 0x0
-#define MX6DL_PAD_EIM_D24__ECSPI4_SS2 0x164 0x534 0x000 0x1 0x0
-#define MX6DL_PAD_EIM_D24__UART3_TX_DATA 0x164 0x534 0x000 0x2 0x0
-#define MX6DL_PAD_EIM_D24__UART3_RX_DATA 0x164 0x534 0x90c 0x2 0x0
-#define MX6DL_PAD_EIM_D24__ECSPI1_SS2 0x164 0x534 0x7ec 0x3 0x0
-#define MX6DL_PAD_EIM_D24__ECSPI2_SS2 0x164 0x534 0x000 0x4 0x0
-#define MX6DL_PAD_EIM_D24__GPIO3_IO24 0x164 0x534 0x000 0x5 0x0
-#define MX6DL_PAD_EIM_D24__AUD5_RXFS 0x164 0x534 0x7bc 0x6 0x1
-#define MX6DL_PAD_EIM_D24__UART1_DTR_B 0x164 0x534 0x000 0x7 0x0
-#define MX6DL_PAD_EIM_D24__EPDC_SDCE7 0x164 0x534 0x000 0x8 0x0
-#define MX6DL_PAD_EIM_D25__EIM_DATA25 0x168 0x538 0x000 0x0 0x0
-#define MX6DL_PAD_EIM_D25__ECSPI4_SS3 0x168 0x538 0x000 0x1 0x0
-#define MX6DL_PAD_EIM_D25__UART3_RX_DATA 0x168 0x538 0x90c 0x2 0x1
-#define MX6DL_PAD_EIM_D25__UART3_TX_DATA 0x168 0x538 0x000 0x2 0x0
-#define MX6DL_PAD_EIM_D25__ECSPI1_SS3 0x168 0x538 0x7f0 0x3 0x0
-#define MX6DL_PAD_EIM_D25__ECSPI2_SS3 0x168 0x538 0x000 0x4 0x0
-#define MX6DL_PAD_EIM_D25__GPIO3_IO25 0x168 0x538 0x000 0x5 0x0
-#define MX6DL_PAD_EIM_D25__AUD5_RXC 0x168 0x538 0x7b8 0x6 0x1
-#define MX6DL_PAD_EIM_D25__UART1_DSR_B 0x168 0x538 0x000 0x7 0x0
-#define MX6DL_PAD_EIM_D25__EPDC_SDCE8 0x168 0x538 0x000 0x8 0x0
-#define MX6DL_PAD_EIM_D26__EIM_DATA26 0x16c 0x53c 0x000 0x0 0x0
-#define MX6DL_PAD_EIM_D26__IPU1_DI1_PIN11 0x16c 0x53c 0x000 0x1 0x0
-#define MX6DL_PAD_EIM_D26__IPU1_CSI0_DATA01 0x16c 0x53c 0x000 0x2 0x0
-#define MX6DL_PAD_EIM_D26__IPU1_CSI1_DATA14 0x16c 0x53c 0x898 0x3 0x1
-#define MX6DL_PAD_EIM_D26__UART2_TX_DATA 0x16c 0x53c 0x000 0x4 0x0
-#define MX6DL_PAD_EIM_D26__UART2_RX_DATA 0x16c 0x53c 0x904 0x4 0x0
-#define MX6DL_PAD_EIM_D26__GPIO3_IO26 0x16c 0x53c 0x000 0x5 0x0
-#define MX6DL_PAD_EIM_D26__IPU1_SISG2 0x16c 0x53c 0x000 0x6 0x0
-#define MX6DL_PAD_EIM_D26__IPU1_DISP1_DATA22 0x16c 0x53c 0x000 0x7 0x0
-#define MX6DL_PAD_EIM_D26__EPDC_SDOED 0x16c 0x53c 0x000 0x8 0x0
-#define MX6DL_PAD_EIM_D27__EIM_DATA27 0x170 0x540 0x000 0x0 0x0
-#define MX6DL_PAD_EIM_D27__IPU1_DI1_PIN13 0x170 0x540 0x000 0x1 0x0
-#define MX6DL_PAD_EIM_D27__IPU1_CSI0_DATA00 0x170 0x540 0x000 0x2 0x0
-#define MX6DL_PAD_EIM_D27__IPU1_CSI1_DATA13 0x170 0x540 0x894 0x3 0x1
-#define MX6DL_PAD_EIM_D27__UART2_RX_DATA 0x170 0x540 0x904 0x4 0x1
-#define MX6DL_PAD_EIM_D27__UART2_TX_DATA 0x170 0x540 0x000 0x4 0x0
-#define MX6DL_PAD_EIM_D27__GPIO3_IO27 0x170 0x540 0x000 0x5 0x0
-#define MX6DL_PAD_EIM_D27__IPU1_SISG3 0x170 0x540 0x000 0x6 0x0
-#define MX6DL_PAD_EIM_D27__IPU1_DISP1_DATA23 0x170 0x540 0x000 0x7 0x0
-#define MX6DL_PAD_EIM_D27__EPDC_SDOE 0x170 0x540 0x000 0x8 0x0
-#define MX6DL_PAD_EIM_D28__EIM_DATA28 0x174 0x544 0x000 0x0 0x0
-#define MX6DL_PAD_EIM_D28__I2C1_SDA 0x174 0x544 0x86c 0x1 0x1
-#define MX6DL_PAD_EIM_D28__ECSPI4_MOSI 0x174 0x544 0x000 0x2 0x0
-#define MX6DL_PAD_EIM_D28__IPU1_CSI1_DATA12 0x174 0x544 0x890 0x3 0x1
-#define MX6DL_PAD_EIM_D28__UART2_CTS_B 0x174 0x544 0x000 0x4 0x0
-#define MX6DL_PAD_EIM_D28__UART2_RTS_B 0x174 0x544 0x900 0x4 0x0
-#define MX6DL_PAD_EIM_D28__GPIO3_IO28 0x174 0x544 0x000 0x5 0x0
-#define MX6DL_PAD_EIM_D28__IPU1_EXT_TRIG 0x174 0x544 0x000 0x6 0x0
-#define MX6DL_PAD_EIM_D28__IPU1_DI0_PIN13 0x174 0x544 0x000 0x7 0x0
-#define MX6DL_PAD_EIM_D28__EPDC_PWR_CTRL3 0x174 0x544 0x000 0x8 0x0
-#define MX6DL_PAD_EIM_D29__EIM_DATA29 0x178 0x548 0x000 0x0 0x0
-#define MX6DL_PAD_EIM_D29__IPU1_DI1_PIN15 0x178 0x548 0x000 0x1 0x0
-#define MX6DL_PAD_EIM_D29__ECSPI4_SS0 0x178 0x548 0x808 0x2 0x1
-#define MX6DL_PAD_EIM_D29__UART2_RTS_B 0x178 0x548 0x900 0x4 0x1
-#define MX6DL_PAD_EIM_D29__UART2_CTS_B 0x178 0x548 0x000 0x4 0x0
-#define MX6DL_PAD_EIM_D29__GPIO3_IO29 0x178 0x548 0x000 0x5 0x0
-#define MX6DL_PAD_EIM_D29__IPU1_CSI1_VSYNC 0x178 0x548 0x8bc 0x6 0x0
-#define MX6DL_PAD_EIM_D29__IPU1_DI0_PIN14 0x178 0x548 0x000 0x7 0x0
-#define MX6DL_PAD_EIM_D29__EPDC_PWR_WAKE 0x178 0x548 0x000 0x8 0x0
-#define MX6DL_PAD_EIM_D30__EIM_DATA30 0x17c 0x54c 0x000 0x0 0x0
-#define MX6DL_PAD_EIM_D30__IPU1_DISP1_DATA21 0x17c 0x54c 0x000 0x1 0x0
-#define MX6DL_PAD_EIM_D30__IPU1_DI0_PIN11 0x17c 0x54c 0x000 0x2 0x0
-#define MX6DL_PAD_EIM_D30__IPU1_CSI0_DATA03 0x17c 0x54c 0x000 0x3 0x0
-#define MX6DL_PAD_EIM_D30__UART3_CTS_B 0x17c 0x54c 0x000 0x4 0x0
-#define MX6DL_PAD_EIM_D30__UART3_RTS_B 0x17c 0x54c 0x908 0x4 0x1
-#define MX6DL_PAD_EIM_D30__GPIO3_IO30 0x17c 0x54c 0x000 0x5 0x0
-#define MX6DL_PAD_EIM_D30__USB_H1_OC 0x17c 0x54c 0x924 0x6 0x0
-#define MX6DL_PAD_EIM_D30__EPDC_SDOEZ 0x17c 0x54c 0x000 0x8 0x0
-#define MX6DL_PAD_EIM_D31__EIM_DATA31 0x180 0x550 0x000 0x0 0x0
-#define MX6DL_PAD_EIM_D31__IPU1_DISP1_DATA20 0x180 0x550 0x000 0x1 0x0
-#define MX6DL_PAD_EIM_D31__IPU1_DI0_PIN12 0x180 0x550 0x000 0x2 0x0
-#define MX6DL_PAD_EIM_D31__IPU1_CSI0_DATA02 0x180 0x550 0x000 0x3 0x0
-#define MX6DL_PAD_EIM_D31__UART3_RTS_B 0x180 0x550 0x908 0x4 0x2
-#define MX6DL_PAD_EIM_D31__UART3_CTS_B 0x180 0x550 0x000 0x4 0x0
-#define MX6DL_PAD_EIM_D31__GPIO3_IO31 0x180 0x550 0x000 0x5 0x0
-#define MX6DL_PAD_EIM_D31__USB_H1_PWR 0x180 0x550 0x000 0x6 0x0
-#define MX6DL_PAD_EIM_D31__EPDC_SDCLK_P 0x180 0x550 0x000 0x8 0x0
-#define MX6DL_PAD_EIM_D31__EIM_ACLK_FREERUN 0x180 0x550 0x000 0x9 0x0
-#define MX6DL_PAD_EIM_DA0__EIM_AD00 0x184 0x554 0x000 0x0 0x0
-#define MX6DL_PAD_EIM_DA0__IPU1_DISP1_DATA09 0x184 0x554 0x000 0x1 0x0
-#define MX6DL_PAD_EIM_DA0__IPU1_CSI1_DATA09 0x184 0x554 0x000 0x2 0x0
-#define MX6DL_PAD_EIM_DA0__GPIO3_IO00 0x184 0x554 0x000 0x5 0x0
-#define MX6DL_PAD_EIM_DA0__SRC_BOOT_CFG00 0x184 0x554 0x000 0x7 0x0
-#define MX6DL_PAD_EIM_DA0__EPDC_SDCLK_N 0x184 0x554 0x000 0x8 0x0
-#define MX6DL_PAD_EIM_DA1__EIM_AD01 0x188 0x558 0x000 0x0 0x0
-#define MX6DL_PAD_EIM_DA1__IPU1_DISP1_DATA08 0x188 0x558 0x000 0x1 0x0
-#define MX6DL_PAD_EIM_DA1__IPU1_CSI1_DATA08 0x188 0x558 0x000 0x2 0x0
-#define MX6DL_PAD_EIM_DA1__GPIO3_IO01 0x188 0x558 0x000 0x5 0x0
-#define MX6DL_PAD_EIM_DA1__SRC_BOOT_CFG01 0x188 0x558 0x000 0x7 0x0
-#define MX6DL_PAD_EIM_DA1__EPDC_SDLE 0x188 0x558 0x000 0x8 0x0
-#define MX6DL_PAD_EIM_DA10__EIM_AD10 0x18c 0x55c 0x000 0x0 0x0
-#define MX6DL_PAD_EIM_DA10__IPU1_DI1_PIN15 0x18c 0x55c 0x000 0x1 0x0
-#define MX6DL_PAD_EIM_DA10__IPU1_CSI1_DATA_EN 0x18c 0x55c 0x8b0 0x2 0x1
-#define MX6DL_PAD_EIM_DA10__GPIO3_IO10 0x18c 0x55c 0x000 0x5 0x0
-#define MX6DL_PAD_EIM_DA10__SRC_BOOT_CFG10 0x18c 0x55c 0x000 0x7 0x0
-#define MX6DL_PAD_EIM_DA10__EPDC_DATA01 0x18c 0x55c 0x000 0x8 0x0
-#define MX6DL_PAD_EIM_DA11__EIM_AD11 0x190 0x560 0x000 0x0 0x0
-#define MX6DL_PAD_EIM_DA11__IPU1_DI1_PIN02 0x190 0x560 0x000 0x1 0x0
-#define MX6DL_PAD_EIM_DA11__IPU1_CSI1_HSYNC 0x190 0x560 0x8b4 0x2 0x0
-#define MX6DL_PAD_EIM_DA11__GPIO3_IO11 0x190 0x560 0x000 0x5 0x0
-#define MX6DL_PAD_EIM_DA11__SRC_BOOT_CFG11 0x190 0x560 0x000 0x7 0x0
-#define MX6DL_PAD_EIM_DA11__EPDC_DATA03 0x190 0x560 0x000 0x8 0x0
-#define MX6DL_PAD_EIM_DA12__EIM_AD12 0x194 0x564 0x000 0x0 0x0
-#define MX6DL_PAD_EIM_DA12__IPU1_DI1_PIN03 0x194 0x564 0x000 0x1 0x0
-#define MX6DL_PAD_EIM_DA12__IPU1_CSI1_VSYNC 0x194 0x564 0x8bc 0x2 0x1
-#define MX6DL_PAD_EIM_DA12__GPIO3_IO12 0x194 0x564 0x000 0x5 0x0
-#define MX6DL_PAD_EIM_DA12__SRC_BOOT_CFG12 0x194 0x564 0x000 0x7 0x0
-#define MX6DL_PAD_EIM_DA12__EPDC_DATA02 0x194 0x564 0x000 0x8 0x0
-#define MX6DL_PAD_EIM_DA13__EIM_AD13 0x198 0x568 0x000 0x0 0x0
-#define MX6DL_PAD_EIM_DA13__IPU1_DI1_D0_CS 0x198 0x568 0x000 0x1 0x0
-#define MX6DL_PAD_EIM_DA13__GPIO3_IO13 0x198 0x568 0x000 0x5 0x0
-#define MX6DL_PAD_EIM_DA13__SRC_BOOT_CFG13 0x198 0x568 0x000 0x7 0x0
-#define MX6DL_PAD_EIM_DA13__EPDC_DATA13 0x198 0x568 0x000 0x8 0x0
-#define MX6DL_PAD_EIM_DA14__EIM_AD14 0x19c 0x56c 0x000 0x0 0x0
-#define MX6DL_PAD_EIM_DA14__IPU1_DI1_D1_CS 0x19c 0x56c 0x000 0x1 0x0
-#define MX6DL_PAD_EIM_DA14__GPIO3_IO14 0x19c 0x56c 0x000 0x5 0x0
-#define MX6DL_PAD_EIM_DA14__SRC_BOOT_CFG14 0x19c 0x56c 0x000 0x7 0x0
-#define MX6DL_PAD_EIM_DA14__EPDC_DATA14 0x19c 0x56c 0x000 0x8 0x0
-#define MX6DL_PAD_EIM_DA15__EIM_AD15 0x1a0 0x570 0x000 0x0 0x0
-#define MX6DL_PAD_EIM_DA15__IPU1_DI1_PIN01 0x1a0 0x570 0x000 0x1 0x0
-#define MX6DL_PAD_EIM_DA15__IPU1_DI1_PIN04 0x1a0 0x570 0x000 0x2 0x0
-#define MX6DL_PAD_EIM_DA15__GPIO3_IO15 0x1a0 0x570 0x000 0x5 0x0
-#define MX6DL_PAD_EIM_DA15__SRC_BOOT_CFG15 0x1a0 0x570 0x000 0x7 0x0
-#define MX6DL_PAD_EIM_DA15__EPDC_DATA09 0x1a0 0x570 0x000 0x8 0x0
-#define MX6DL_PAD_EIM_DA2__EIM_AD02 0x1a4 0x574 0x000 0x0 0x0
-#define MX6DL_PAD_EIM_DA2__IPU1_DISP1_DATA07 0x1a4 0x574 0x000 0x1 0x0
-#define MX6DL_PAD_EIM_DA2__IPU1_CSI1_DATA07 0x1a4 0x574 0x000 0x2 0x0
-#define MX6DL_PAD_EIM_DA2__GPIO3_IO02 0x1a4 0x574 0x000 0x5 0x0
-#define MX6DL_PAD_EIM_DA2__SRC_BOOT_CFG02 0x1a4 0x574 0x000 0x7 0x0
-#define MX6DL_PAD_EIM_DA2__EPDC_BDR0 0x1a4 0x574 0x000 0x8 0x0
-#define MX6DL_PAD_EIM_DA3__EIM_AD03 0x1a8 0x578 0x000 0x0 0x0
-#define MX6DL_PAD_EIM_DA3__IPU1_DISP1_DATA06 0x1a8 0x578 0x000 0x1 0x0
-#define MX6DL_PAD_EIM_DA3__IPU1_CSI1_DATA06 0x1a8 0x578 0x000 0x2 0x0
-#define MX6DL_PAD_EIM_DA3__GPIO3_IO03 0x1a8 0x578 0x000 0x5 0x0
-#define MX6DL_PAD_EIM_DA3__SRC_BOOT_CFG03 0x1a8 0x578 0x000 0x7 0x0
-#define MX6DL_PAD_EIM_DA3__EPDC_BDR1 0x1a8 0x578 0x000 0x8 0x0
-#define MX6DL_PAD_EIM_DA4__EIM_AD04 0x1ac 0x57c 0x000 0x0 0x0
-#define MX6DL_PAD_EIM_DA4__IPU1_DISP1_DATA05 0x1ac 0x57c 0x000 0x1 0x0
-#define MX6DL_PAD_EIM_DA4__IPU1_CSI1_DATA05 0x1ac 0x57c 0x000 0x2 0x0
-#define MX6DL_PAD_EIM_DA4__GPIO3_IO04 0x1ac 0x57c 0x000 0x5 0x0
-#define MX6DL_PAD_EIM_DA4__SRC_BOOT_CFG04 0x1ac 0x57c 0x000 0x7 0x0
-#define MX6DL_PAD_EIM_DA4__EPDC_SDCE0 0x1ac 0x57c 0x000 0x8 0x0
-#define MX6DL_PAD_EIM_DA5__EIM_AD05 0x1b0 0x580 0x000 0x0 0x0
-#define MX6DL_PAD_EIM_DA5__IPU1_DISP1_DATA04 0x1b0 0x580 0x000 0x1 0x0
-#define MX6DL_PAD_EIM_DA5__IPU1_CSI1_DATA04 0x1b0 0x580 0x000 0x2 0x0
-#define MX6DL_PAD_EIM_DA5__GPIO3_IO05 0x1b0 0x580 0x000 0x5 0x0
-#define MX6DL_PAD_EIM_DA5__SRC_BOOT_CFG05 0x1b0 0x580 0x000 0x7 0x0
-#define MX6DL_PAD_EIM_DA5__EPDC_SDCE1 0x1b0 0x580 0x000 0x8 0x0
-#define MX6DL_PAD_EIM_DA6__EIM_AD06 0x1b4 0x584 0x000 0x0 0x0
-#define MX6DL_PAD_EIM_DA6__IPU1_DISP1_DATA03 0x1b4 0x584 0x000 0x1 0x0
-#define MX6DL_PAD_EIM_DA6__IPU1_CSI1_DATA03 0x1b4 0x584 0x000 0x2 0x0
-#define MX6DL_PAD_EIM_DA6__GPIO3_IO06 0x1b4 0x584 0x000 0x5 0x0
-#define MX6DL_PAD_EIM_DA6__SRC_BOOT_CFG06 0x1b4 0x584 0x000 0x7 0x0
-#define MX6DL_PAD_EIM_DA6__EPDC_SDCE2 0x1b4 0x584 0x000 0x8 0x0
-#define MX6DL_PAD_EIM_DA7__EIM_AD07 0x1b8 0x588 0x000 0x0 0x0
-#define MX6DL_PAD_EIM_DA7__IPU1_DISP1_DATA02 0x1b8 0x588 0x000 0x1 0x0
-#define MX6DL_PAD_EIM_DA7__IPU1_CSI1_DATA02 0x1b8 0x588 0x000 0x2 0x0
-#define MX6DL_PAD_EIM_DA7__GPIO3_IO07 0x1b8 0x588 0x000 0x5 0x0
-#define MX6DL_PAD_EIM_DA7__SRC_BOOT_CFG07 0x1b8 0x588 0x000 0x7 0x0
-#define MX6DL_PAD_EIM_DA7__EPDC_SDCE3 0x1b8 0x588 0x000 0x8 0x0
-#define MX6DL_PAD_EIM_DA8__EIM_AD08 0x1bc 0x58c 0x000 0x0 0x0
-#define MX6DL_PAD_EIM_DA8__IPU1_DISP1_DATA01 0x1bc 0x58c 0x000 0x1 0x0
-#define MX6DL_PAD_EIM_DA8__IPU1_CSI1_DATA01 0x1bc 0x58c 0x000 0x2 0x0
-#define MX6DL_PAD_EIM_DA8__GPIO3_IO08 0x1bc 0x58c 0x000 0x5 0x0
-#define MX6DL_PAD_EIM_DA8__SRC_BOOT_CFG08 0x1bc 0x58c 0x000 0x7 0x0
-#define MX6DL_PAD_EIM_DA8__EPDC_SDCE4 0x1bc 0x58c 0x000 0x8 0x0
-#define MX6DL_PAD_EIM_DA9__EIM_AD09 0x1c0 0x590 0x000 0x0 0x0
-#define MX6DL_PAD_EIM_DA9__IPU1_DISP1_DATA00 0x1c0 0x590 0x000 0x1 0x0
-#define MX6DL_PAD_EIM_DA9__IPU1_CSI1_DATA00 0x1c0 0x590 0x000 0x2 0x0
-#define MX6DL_PAD_EIM_DA9__GPIO3_IO09 0x1c0 0x590 0x000 0x5 0x0
-#define MX6DL_PAD_EIM_DA9__SRC_BOOT_CFG09 0x1c0 0x590 0x000 0x7 0x0
-#define MX6DL_PAD_EIM_DA9__EPDC_SDCE5 0x1c0 0x590 0x000 0x8 0x0
-#define MX6DL_PAD_EIM_EB0__EIM_EB0_B 0x1c4 0x594 0x000 0x0 0x0
-#define MX6DL_PAD_EIM_EB0__IPU1_DISP1_DATA11 0x1c4 0x594 0x000 0x1 0x0
-#define MX6DL_PAD_EIM_EB0__IPU1_CSI1_DATA11 0x1c4 0x594 0x88c 0x2 0x1
-#define MX6DL_PAD_EIM_EB0__CCM_PMIC_READY 0x1c4 0x594 0x7d4 0x4 0x0
-#define MX6DL_PAD_EIM_EB0__GPIO2_IO28 0x1c4 0x594 0x000 0x5 0x0
-#define MX6DL_PAD_EIM_EB0__SRC_BOOT_CFG27 0x1c4 0x594 0x000 0x7 0x0
-#define MX6DL_PAD_EIM_EB0__EPDC_PWR_COM 0x1c4 0x594 0x000 0x8 0x0
-#define MX6DL_PAD_EIM_EB1__EIM_EB1_B 0x1c8 0x598 0x000 0x0 0x0
-#define MX6DL_PAD_EIM_EB1__IPU1_DISP1_DATA10 0x1c8 0x598 0x000 0x1 0x0
-#define MX6DL_PAD_EIM_EB1__IPU1_CSI1_DATA10 0x1c8 0x598 0x888 0x2 0x1
-#define MX6DL_PAD_EIM_EB1__GPIO2_IO29 0x1c8 0x598 0x000 0x5 0x0
-#define MX6DL_PAD_EIM_EB1__SRC_BOOT_CFG28 0x1c8 0x598 0x000 0x7 0x0
-#define MX6DL_PAD_EIM_EB1__EPDC_SDSHR 0x1c8 0x598 0x000 0x8 0x0
-#define MX6DL_PAD_EIM_EB2__EIM_EB2_B 0x1cc 0x59c 0x000 0x0 0x0
-#define MX6DL_PAD_EIM_EB2__ECSPI1_SS0 0x1cc 0x59c 0x7e4 0x1 0x2
-#define MX6DL_PAD_EIM_EB2__IPU1_CSI1_DATA19 0x1cc 0x59c 0x8ac 0x3 0x1
-#define MX6DL_PAD_EIM_EB2__HDMI_TX_DDC_SCL 0x1cc 0x59c 0x860 0x4 0x0
-#define MX6DL_PAD_EIM_EB2__GPIO2_IO30 0x1cc 0x59c 0x000 0x5 0x0
-#define MX6DL_PAD_EIM_EB2__I2C2_SCL 0x1cc 0x59c 0x870 0x6 0x0
-#define MX6DL_PAD_EIM_EB2__SRC_BOOT_CFG30 0x1cc 0x59c 0x000 0x7 0x0
-#define MX6DL_PAD_EIM_EB2__EPDC_DATA05 0x1cc 0x59c 0x000 0x8 0x0
-#define MX6DL_PAD_EIM_EB3__EIM_EB3_B 0x1d0 0x5a0 0x000 0x0 0x0
-#define MX6DL_PAD_EIM_EB3__ECSPI4_RDY 0x1d0 0x5a0 0x000 0x1 0x0
-#define MX6DL_PAD_EIM_EB3__UART3_RTS_B 0x1d0 0x5a0 0x908 0x2 0x3
-#define MX6DL_PAD_EIM_EB3__UART3_CTS_B 0x1d0 0x5a0 0x000 0x2 0x0
-#define MX6DL_PAD_EIM_EB3__UART1_RI_B 0x1d0 0x5a0 0x000 0x3 0x0
-#define MX6DL_PAD_EIM_EB3__IPU1_CSI1_HSYNC 0x1d0 0x5a0 0x8b4 0x4 0x1
-#define MX6DL_PAD_EIM_EB3__GPIO2_IO31 0x1d0 0x5a0 0x000 0x5 0x0
-#define MX6DL_PAD_EIM_EB3__IPU1_DI1_PIN03 0x1d0 0x5a0 0x000 0x6 0x0
-#define MX6DL_PAD_EIM_EB3__SRC_BOOT_CFG31 0x1d0 0x5a0 0x000 0x7 0x0
-#define MX6DL_PAD_EIM_EB3__EPDC_SDCE0 0x1d0 0x5a0 0x000 0x8 0x0
-#define MX6DL_PAD_EIM_EB3__EIM_ACLK_FREERUN 0x1d0 0x5a0 0x000 0x9 0x0
-#define MX6DL_PAD_EIM_LBA__EIM_LBA_B 0x1d4 0x5a4 0x000 0x0 0x0
-#define MX6DL_PAD_EIM_LBA__IPU1_DI1_PIN17 0x1d4 0x5a4 0x000 0x1 0x0
-#define MX6DL_PAD_EIM_LBA__ECSPI2_SS1 0x1d4 0x5a4 0x804 0x2 0x1
-#define MX6DL_PAD_EIM_LBA__GPIO2_IO27 0x1d4 0x5a4 0x000 0x5 0x0
-#define MX6DL_PAD_EIM_LBA__SRC_BOOT_CFG26 0x1d4 0x5a4 0x000 0x7 0x0
-#define MX6DL_PAD_EIM_LBA__EPDC_DATA04 0x1d4 0x5a4 0x000 0x8 0x0
-#define MX6DL_PAD_EIM_OE__EIM_OE_B 0x1d8 0x5a8 0x000 0x0 0x0
-#define MX6DL_PAD_EIM_OE__IPU1_DI1_PIN07 0x1d8 0x5a8 0x000 0x1 0x0
-#define MX6DL_PAD_EIM_OE__ECSPI2_MISO 0x1d8 0x5a8 0x7f8 0x2 0x2
-#define MX6DL_PAD_EIM_OE__GPIO2_IO25 0x1d8 0x5a8 0x000 0x5 0x0
-#define MX6DL_PAD_EIM_OE__EPDC_PWR_IRQ 0x1d8 0x5a8 0x000 0x8 0x0
-#define MX6DL_PAD_EIM_RW__EIM_RW 0x1dc 0x5ac 0x000 0x0 0x0
-#define MX6DL_PAD_EIM_RW__IPU1_DI1_PIN08 0x1dc 0x5ac 0x000 0x1 0x0
-#define MX6DL_PAD_EIM_RW__ECSPI2_SS0 0x1dc 0x5ac 0x800 0x2 0x2
-#define MX6DL_PAD_EIM_RW__GPIO2_IO26 0x1dc 0x5ac 0x000 0x5 0x0
-#define MX6DL_PAD_EIM_RW__SRC_BOOT_CFG29 0x1dc 0x5ac 0x000 0x7 0x0
-#define MX6DL_PAD_EIM_RW__EPDC_DATA07 0x1dc 0x5ac 0x000 0x8 0x0
-#define MX6DL_PAD_EIM_WAIT__EIM_WAIT_B 0x1e0 0x5b0 0x000 0x0 0x0
-#define MX6DL_PAD_EIM_WAIT__EIM_DTACK_B 0x1e0 0x5b0 0x000 0x1 0x0
-#define MX6DL_PAD_EIM_WAIT__GPIO5_IO00 0x1e0 0x5b0 0x000 0x5 0x0
-#define MX6DL_PAD_EIM_WAIT__SRC_BOOT_CFG25 0x1e0 0x5b0 0x000 0x7 0x0
-#define MX6DL_PAD_ENET_CRS_DV__ENET_RX_EN 0x1e4 0x5b4 0x828 0x1 0x0
-#define MX6DL_PAD_ENET_CRS_DV__ESAI_TX_CLK 0x1e4 0x5b4 0x840 0x2 0x0
-#define MX6DL_PAD_ENET_CRS_DV__SPDIF_EXT_CLK 0x1e4 0x5b4 0x8f4 0x3 0x0
-#define MX6DL_PAD_ENET_CRS_DV__GPIO1_IO25 0x1e4 0x5b4 0x000 0x5 0x0
-#define MX6DL_PAD_ENET_MDC__MLB_DATA 0x1e8 0x5b8 0x8e0 0x0 0x0
-#define MX6DL_PAD_ENET_MDC__ENET_MDC 0x1e8 0x5b8 0x000 0x1 0x0
-#define MX6DL_PAD_ENET_MDC__ESAI_TX5_RX0 0x1e8 0x5b8 0x858 0x2 0x0
-#define MX6DL_PAD_ENET_MDC__ENET_1588_EVENT1_IN 0x1e8 0x5b8 0x000 0x4 0x0
-#define MX6DL_PAD_ENET_MDC__GPIO1_IO31 0x1e8 0x5b8 0x000 0x5 0x0
-#define MX6DL_PAD_ENET_MDIO__ENET_MDIO 0x1ec 0x5bc 0x810 0x1 0x0
-#define MX6DL_PAD_ENET_MDIO__ESAI_RX_CLK 0x1ec 0x5bc 0x83c 0x2 0x0
-#define MX6DL_PAD_ENET_MDIO__ENET_1588_EVENT1_OUT 0x1ec 0x5bc 0x000 0x4 0x0
-#define MX6DL_PAD_ENET_MDIO__GPIO1_IO22 0x1ec 0x5bc 0x000 0x5 0x0
-#define MX6DL_PAD_ENET_MDIO__SPDIF_LOCK 0x1ec 0x5bc 0x000 0x6 0x0
-#define MX6DL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1f0 0x5c0 0x000 0x1 0x0
-#define MX6DL_PAD_ENET_REF_CLK__ESAI_RX_FS 0x1f0 0x5c0 0x82c 0x2 0x0
-#define MX6DL_PAD_ENET_REF_CLK__GPIO1_IO23 0x1f0 0x5c0 0x000 0x5 0x0
-#define MX6DL_PAD_ENET_REF_CLK__SPDIF_SR_CLK 0x1f0 0x5c0 0x000 0x6 0x0
-#define MX6DL_PAD_ENET_RX_ER__USB_OTG_ID 0x1f4 0x5c4 0x790 0x0 0x0
-#define MX6DL_PAD_ENET_RX_ER__ENET_RX_ER 0x1f4 0x5c4 0x000 0x1 0x0
-#define MX6DL_PAD_ENET_RX_ER__ESAI_RX_HF_CLK 0x1f4 0x5c4 0x834 0x2 0x0
-#define MX6DL_PAD_ENET_RX_ER__SPDIF_IN 0x1f4 0x5c4 0x8f0 0x3 0x1
-#define MX6DL_PAD_ENET_RX_ER__ENET_1588_EVENT2_OUT 0x1f4 0x5c4 0x000 0x4 0x0
-#define MX6DL_PAD_ENET_RX_ER__GPIO1_IO24 0x1f4 0x5c4 0x000 0x5 0x0
-#define MX6DL_PAD_ENET_RXD0__ENET_RX_DATA0 0x1f8 0x5c8 0x818 0x1 0x0
-#define MX6DL_PAD_ENET_RXD0__ESAI_TX_HF_CLK 0x1f8 0x5c8 0x838 0x2 0x0
-#define MX6DL_PAD_ENET_RXD0__SPDIF_OUT 0x1f8 0x5c8 0x000 0x3 0x0
-#define MX6DL_PAD_ENET_RXD0__GPIO1_IO27 0x1f8 0x5c8 0x000 0x5 0x0
-#define MX6DL_PAD_ENET_RXD1__MLB_SIG 0x1fc 0x5cc 0x8e4 0x0 0x0
-#define MX6DL_PAD_ENET_RXD1__ENET_RX_DATA1 0x1fc 0x5cc 0x81c 0x1 0x0
-#define MX6DL_PAD_ENET_RXD1__ESAI_TX_FS 0x1fc 0x5cc 0x830 0x2 0x0
-#define MX6DL_PAD_ENET_RXD1__ENET_1588_EVENT3_OUT 0x1fc 0x5cc 0x000 0x4 0x0
-#define MX6DL_PAD_ENET_RXD1__GPIO1_IO26 0x1fc 0x5cc 0x000 0x5 0x0
-#define MX6DL_PAD_ENET_TX_EN__ENET_TX_EN 0x200 0x5d0 0x000 0x1 0x0
-#define MX6DL_PAD_ENET_TX_EN__ESAI_TX3_RX2 0x200 0x5d0 0x850 0x2 0x0
-#define MX6DL_PAD_ENET_TX_EN__GPIO1_IO28 0x200 0x5d0 0x000 0x5 0x0
-#define MX6DL_PAD_ENET_TX_EN__I2C4_SCL 0x200 0x5d0 0x880 0x9 0x0
-#define MX6DL_PAD_ENET_TXD0__ENET_TX_DATA0 0x204 0x5d4 0x000 0x1 0x0
-#define MX6DL_PAD_ENET_TXD0__ESAI_TX4_RX1 0x204 0x5d4 0x854 0x2 0x0
-#define MX6DL_PAD_ENET_TXD0__GPIO1_IO30 0x204 0x5d4 0x000 0x5 0x0
-#define MX6DL_PAD_ENET_TXD1__MLB_CLK 0x208 0x5d8 0x8dc 0x0 0x0
-#define MX6DL_PAD_ENET_TXD1__ENET_TX_DATA1 0x208 0x5d8 0x000 0x1 0x0
-#define MX6DL_PAD_ENET_TXD1__ESAI_TX2_RX3 0x208 0x5d8 0x84c 0x2 0x0
-#define MX6DL_PAD_ENET_TXD1__ENET_1588_EVENT0_IN 0x208 0x5d8 0x000 0x4 0x0
-#define MX6DL_PAD_ENET_TXD1__GPIO1_IO29 0x208 0x5d8 0x000 0x5 0x0
-#define MX6DL_PAD_ENET_TXD1__I2C4_SDA 0x208 0x5d8 0x884 0x9 0x0
-#define MX6DL_PAD_GPIO_0__CCM_CLKO1 0x20c 0x5dc 0x000 0x0 0x0
-#define MX6DL_PAD_GPIO_0__KEY_COL5 0x20c 0x5dc 0x8c0 0x2 0x1
-#define MX6DL_PAD_GPIO_0__ASRC_EXT_CLK 0x20c 0x5dc 0x794 0x3 0x0
-#define MX6DL_PAD_GPIO_0__EPIT1_OUT 0x20c 0x5dc 0x000 0x4 0x0
-#define MX6DL_PAD_GPIO_0__GPIO1_IO00 0x20c 0x5dc 0x000 0x5 0x0
-#define MX6DL_PAD_GPIO_0__USB_H1_PWR 0x20c 0x5dc 0x000 0x6 0x0
-#define MX6DL_PAD_GPIO_0__SNVS_VIO_5 0x20c 0x5dc 0x000 0x7 0x0
-#define MX6DL_PAD_GPIO_1__ESAI_RX_CLK 0x210 0x5e0 0x83c 0x0 0x1
-#define MX6DL_PAD_GPIO_1__WDOG2_B 0x210 0x5e0 0x000 0x1 0x0
-#define MX6DL_PAD_GPIO_1__KEY_ROW5 0x210 0x5e0 0x8cc 0x2 0x1
-#define MX6DL_PAD_GPIO_1__USB_OTG_ID 0x210 0x5e0 0x790 0x3 0x1
-#define MX6DL_PAD_GPIO_1__PWM2_OUT 0x210 0x5e0 0x000 0x4 0x0
-#define MX6DL_PAD_GPIO_1__GPIO1_IO01 0x210 0x5e0 0x000 0x5 0x0
-#define MX6DL_PAD_GPIO_1__SD1_CD_B 0x210 0x5e0 0x000 0x6 0x0
-#define MX6DL_PAD_GPIO_16__ESAI_TX3_RX2 0x214 0x5e4 0x850 0x0 0x1
-#define MX6DL_PAD_GPIO_16__ENET_1588_EVENT2_IN 0x214 0x5e4 0x000 0x1 0x0
-#define MX6DL_PAD_GPIO_16__ENET_REF_CLK 0x214 0x5e4 0x80c 0x2 0x0
-#define MX6DL_PAD_GPIO_16__SD1_LCTL 0x214 0x5e4 0x000 0x3 0x0
-#define MX6DL_PAD_GPIO_16__SPDIF_IN 0x214 0x5e4 0x8f0 0x4 0x2
-#define MX6DL_PAD_GPIO_16__GPIO7_IO11 0x214 0x5e4 0x000 0x5 0x0
-#define MX6DL_PAD_GPIO_16__I2C3_SDA 0x214 0x5e4 0x87c 0x6 0x1
-#define MX6DL_PAD_GPIO_16__JTAG_DE_B 0x214 0x5e4 0x000 0x7 0x0
-#define MX6DL_PAD_GPIO_17__ESAI_TX0 0x218 0x5e8 0x844 0x0 0x0
-#define MX6DL_PAD_GPIO_17__ENET_1588_EVENT3_IN 0x218 0x5e8 0x000 0x1 0x0
-#define MX6DL_PAD_GPIO_17__CCM_PMIC_READY 0x218 0x5e8 0x7d4 0x2 0x1
-#define MX6DL_PAD_GPIO_17__SDMA_EXT_EVENT0 0x218 0x5e8 0x8e8 0x3 0x1
-#define MX6DL_PAD_GPIO_17__SPDIF_OUT 0x218 0x5e8 0x000 0x4 0x0
-#define MX6DL_PAD_GPIO_17__GPIO7_IO12 0x218 0x5e8 0x000 0x5 0x0
-#define MX6DL_PAD_GPIO_18__ESAI_TX1 0x21c 0x5ec 0x848 0x0 0x0
-#define MX6DL_PAD_GPIO_18__ENET_RX_CLK 0x21c 0x5ec 0x814 0x1 0x0
-#define MX6DL_PAD_GPIO_18__SD3_VSELECT 0x21c 0x5ec 0x000 0x2 0x0
-#define MX6DL_PAD_GPIO_18__SDMA_EXT_EVENT1 0x21c 0x5ec 0x8ec 0x3 0x1
-#define MX6DL_PAD_GPIO_18__ASRC_EXT_CLK 0x21c 0x5ec 0x794 0x4 0x1
-#define MX6DL_PAD_GPIO_18__GPIO7_IO13 0x21c 0x5ec 0x000 0x5 0x0
-#define MX6DL_PAD_GPIO_18__SNVS_VIO_5_CTL 0x21c 0x5ec 0x000 0x6 0x0
-#define MX6DL_PAD_GPIO_19__KEY_COL5 0x220 0x5f0 0x8c0 0x0 0x2
-#define MX6DL_PAD_GPIO_19__ENET_1588_EVENT0_OUT 0x220 0x5f0 0x000 0x1 0x0
-#define MX6DL_PAD_GPIO_19__SPDIF_OUT 0x220 0x5f0 0x000 0x2 0x0
-#define MX6DL_PAD_GPIO_19__CCM_CLKO1 0x220 0x5f0 0x000 0x3 0x0
-#define MX6DL_PAD_GPIO_19__ECSPI1_RDY 0x220 0x5f0 0x000 0x4 0x0
-#define MX6DL_PAD_GPIO_19__GPIO4_IO05 0x220 0x5f0 0x000 0x5 0x0
-#define MX6DL_PAD_GPIO_19__ENET_TX_ER 0x220 0x5f0 0x000 0x6 0x0
-#define MX6DL_PAD_GPIO_2__ESAI_TX_FS 0x224 0x5f4 0x830 0x0 0x1
-#define MX6DL_PAD_GPIO_2__KEY_ROW6 0x224 0x5f4 0x8d0 0x2 0x1
-#define MX6DL_PAD_GPIO_2__GPIO1_IO02 0x224 0x5f4 0x000 0x5 0x0
-#define MX6DL_PAD_GPIO_2__SD2_WP 0x224 0x5f4 0x000 0x6 0x0
-#define MX6DL_PAD_GPIO_2__MLB_DATA 0x224 0x5f4 0x8e0 0x7 0x1
-#define MX6DL_PAD_GPIO_3__ESAI_RX_HF_CLK 0x228 0x5f8 0x834 0x0 0x1
-#define MX6DL_PAD_GPIO_3__I2C3_SCL 0x228 0x5f8 0x878 0x2 0x1
-#define MX6DL_PAD_GPIO_3__XTALOSC_REF_CLK_24M 0x228 0x5f8 0x000 0x3 0x0
-#define MX6DL_PAD_GPIO_3__CCM_CLKO2 0x228 0x5f8 0x000 0x4 0x0
-#define MX6DL_PAD_GPIO_3__GPIO1_IO03 0x228 0x5f8 0x000 0x5 0x0
-#define MX6DL_PAD_GPIO_3__USB_H1_OC 0x228 0x5f8 0x924 0x6 0x1
-#define MX6DL_PAD_GPIO_3__MLB_CLK 0x228 0x5f8 0x8dc 0x7 0x1
-#define MX6DL_PAD_GPIO_4__ESAI_TX_HF_CLK 0x22c 0x5fc 0x838 0x0 0x1
-#define MX6DL_PAD_GPIO_4__KEY_COL7 0x22c 0x5fc 0x8c8 0x2 0x1
-#define MX6DL_PAD_GPIO_4__GPIO1_IO04 0x22c 0x5fc 0x000 0x5 0x0
-#define MX6DL_PAD_GPIO_4__SD2_CD_B 0x22c 0x5fc 0x000 0x6 0x0
-#define MX6DL_PAD_GPIO_5__ESAI_TX2_RX3 0x230 0x600 0x84c 0x0 0x1
-#define MX6DL_PAD_GPIO_5__KEY_ROW7 0x230 0x600 0x8d4 0x2 0x1
-#define MX6DL_PAD_GPIO_5__CCM_CLKO1 0x230 0x600 0x000 0x3 0x0
-#define MX6DL_PAD_GPIO_5__GPIO1_IO05 0x230 0x600 0x000 0x5 0x0
-#define MX6DL_PAD_GPIO_5__I2C3_SCL 0x230 0x600 0x878 0x6 0x2
-#define MX6DL_PAD_GPIO_5__ARM_EVENTI 0x230 0x600 0x000 0x7 0x0
-#define MX6DL_PAD_GPIO_6__ESAI_TX_CLK 0x234 0x604 0x840 0x0 0x1
-#define MX6DL_PAD_GPIO_6__I2C3_SDA 0x234 0x604 0x87c 0x2 0x2
-#define MX6DL_PAD_GPIO_6__GPIO1_IO06 0x234 0x604 0x000 0x5 0x0
-#define MX6DL_PAD_GPIO_6__SD2_LCTL 0x234 0x604 0x000 0x6 0x0
-#define MX6DL_PAD_GPIO_6__MLB_SIG 0x234 0x604 0x8e4 0x7 0x1
-#define MX6DL_PAD_GPIO_7__ESAI_TX4_RX1 0x238 0x608 0x854 0x0 0x1
-#define MX6DL_PAD_GPIO_7__EPIT1_OUT 0x238 0x608 0x000 0x2 0x0
-#define MX6DL_PAD_GPIO_7__FLEXCAN1_TX 0x238 0x608 0x000 0x3 0x0
-#define MX6DL_PAD_GPIO_7__UART2_TX_DATA 0x238 0x608 0x000 0x4 0x0
-#define MX6DL_PAD_GPIO_7__UART2_RX_DATA 0x238 0x608 0x904 0x4 0x2
-#define MX6DL_PAD_GPIO_7__GPIO1_IO07 0x238 0x608 0x000 0x5 0x0
-#define MX6DL_PAD_GPIO_7__SPDIF_LOCK 0x238 0x608 0x000 0x6 0x0
-#define MX6DL_PAD_GPIO_7__USB_OTG_HOST_MODE 0x238 0x608 0x000 0x7 0x0
-#define MX6DL_PAD_GPIO_7__I2C4_SCL 0x238 0x608 0x880 0x8 0x1
-#define MX6DL_PAD_GPIO_8__ESAI_TX5_RX0 0x23c 0x60c 0x858 0x0 0x1
-#define MX6DL_PAD_GPIO_8__XTALOSC_REF_CLK_32K 0x23c 0x60c 0x000 0x1 0x0
-#define MX6DL_PAD_GPIO_8__EPIT2_OUT 0x23c 0x60c 0x000 0x2 0x0
-#define MX6DL_PAD_GPIO_8__FLEXCAN1_RX 0x23c 0x60c 0x7c8 0x3 0x0
-#define MX6DL_PAD_GPIO_8__UART2_RX_DATA 0x23c 0x60c 0x904 0x4 0x3
-#define MX6DL_PAD_GPIO_8__UART2_TX_DATA 0x23c 0x60c 0x000 0x4 0x0
-#define MX6DL_PAD_GPIO_8__GPIO1_IO08 0x23c 0x60c 0x000 0x5 0x0
-#define MX6DL_PAD_GPIO_8__SPDIF_SR_CLK 0x23c 0x60c 0x000 0x6 0x0
-#define MX6DL_PAD_GPIO_8__USB_OTG_PWR_CTL_WAKE 0x23c 0x60c 0x000 0x7 0x0
-#define MX6DL_PAD_GPIO_8__I2C4_SDA 0x23c 0x60c 0x884 0x8 0x1
-#define MX6DL_PAD_GPIO_9__ESAI_RX_FS 0x240 0x610 0x82c 0x0 0x1
-#define MX6DL_PAD_GPIO_9__WDOG1_B 0x240 0x610 0x000 0x1 0x0
-#define MX6DL_PAD_GPIO_9__KEY_COL6 0x240 0x610 0x8c4 0x2 0x1
-#define MX6DL_PAD_GPIO_9__CCM_REF_EN_B 0x240 0x610 0x000 0x3 0x0
-#define MX6DL_PAD_GPIO_9__PWM1_OUT 0x240 0x610 0x000 0x4 0x0
-#define MX6DL_PAD_GPIO_9__GPIO1_IO09 0x240 0x610 0x000 0x5 0x0
-#define MX6DL_PAD_GPIO_9__SD1_WP 0x240 0x610 0x92c 0x6 0x1
-#define MX6DL_PAD_KEY_COL0__ECSPI1_SCLK 0x244 0x62c 0x7d8 0x0 0x3
-#define MX6DL_PAD_KEY_COL0__ENET_RX_DATA3 0x244 0x62c 0x824 0x1 0x0
-#define MX6DL_PAD_KEY_COL0__AUD5_TXC 0x244 0x62c 0x7c0 0x2 0x1
-#define MX6DL_PAD_KEY_COL0__KEY_COL0 0x244 0x62c 0x000 0x3 0x0
-#define MX6DL_PAD_KEY_COL0__UART4_TX_DATA 0x244 0x62c 0x000 0x4 0x0
-#define MX6DL_PAD_KEY_COL0__UART4_RX_DATA 0x244 0x62c 0x914 0x4 0x2
-#define MX6DL_PAD_KEY_COL0__GPIO4_IO06 0x244 0x62c 0x000 0x5 0x0
-#define MX6DL_PAD_KEY_COL0__DCIC1_OUT 0x244 0x62c 0x000 0x6 0x0
-#define MX6DL_PAD_KEY_COL1__ECSPI1_MISO 0x248 0x630 0x7dc 0x0 0x3
-#define MX6DL_PAD_KEY_COL1__ENET_MDIO 0x248 0x630 0x810 0x1 0x1
-#define MX6DL_PAD_KEY_COL1__AUD5_TXFS 0x248 0x630 0x7c4 0x2 0x1
-#define MX6DL_PAD_KEY_COL1__KEY_COL1 0x248 0x630 0x000 0x3 0x0
-#define MX6DL_PAD_KEY_COL1__UART5_TX_DATA 0x248 0x630 0x000 0x4 0x0
-#define MX6DL_PAD_KEY_COL1__UART5_RX_DATA 0x248 0x630 0x91c 0x4 0x2
-#define MX6DL_PAD_KEY_COL1__GPIO4_IO08 0x248 0x630 0x000 0x5 0x0
-#define MX6DL_PAD_KEY_COL1__SD1_VSELECT 0x248 0x630 0x000 0x6 0x0
-#define MX6DL_PAD_KEY_COL2__ECSPI1_SS1 0x24c 0x634 0x7e8 0x0 0x2
-#define MX6DL_PAD_KEY_COL2__ENET_RX_DATA2 0x24c 0x634 0x820 0x1 0x0
-#define MX6DL_PAD_KEY_COL2__FLEXCAN1_TX 0x24c 0x634 0x000 0x2 0x0
-#define MX6DL_PAD_KEY_COL2__KEY_COL2 0x24c 0x634 0x000 0x3 0x0
-#define MX6DL_PAD_KEY_COL2__ENET_MDC 0x24c 0x634 0x000 0x4 0x0
-#define MX6DL_PAD_KEY_COL2__GPIO4_IO10 0x24c 0x634 0x000 0x5 0x0
-#define MX6DL_PAD_KEY_COL2__USB_H1_PWR_CTL_WAKE 0x24c 0x634 0x000 0x6 0x0
-#define MX6DL_PAD_KEY_COL3__ECSPI1_SS3 0x250 0x638 0x7f0 0x0 0x1
-#define MX6DL_PAD_KEY_COL3__ENET_CRS 0x250 0x638 0x000 0x1 0x0
-#define MX6DL_PAD_KEY_COL3__HDMI_TX_DDC_SCL 0x250 0x638 0x860 0x2 0x1
-#define MX6DL_PAD_KEY_COL3__KEY_COL3 0x250 0x638 0x000 0x3 0x0
-#define MX6DL_PAD_KEY_COL3__I2C2_SCL 0x250 0x638 0x870 0x4 0x1
-#define MX6DL_PAD_KEY_COL3__GPIO4_IO12 0x250 0x638 0x000 0x5 0x0
-#define MX6DL_PAD_KEY_COL3__SPDIF_IN 0x250 0x638 0x8f0 0x6 0x3
-#define MX6DL_PAD_KEY_COL4__FLEXCAN2_TX 0x254 0x63c 0x000 0x0 0x0
-#define MX6DL_PAD_KEY_COL4__IPU1_SISG4 0x254 0x63c 0x000 0x1 0x0
-#define MX6DL_PAD_KEY_COL4__USB_OTG_OC 0x254 0x63c 0x920 0x2 0x1
-#define MX6DL_PAD_KEY_COL4__KEY_COL4 0x254 0x63c 0x000 0x3 0x0
-#define MX6DL_PAD_KEY_COL4__UART5_RTS_B 0x254 0x63c 0x918 0x4 0x2
-#define MX6DL_PAD_KEY_COL4__UART5_CTS_B 0x254 0x63c 0x000 0x4 0x0
-#define MX6DL_PAD_KEY_COL4__GPIO4_IO14 0x254 0x63c 0x000 0x5 0x0
-#define MX6DL_PAD_KEY_ROW0__ECSPI1_MOSI 0x258 0x640 0x7e0 0x0 0x3
-#define MX6DL_PAD_KEY_ROW0__ENET_TX_DATA3 0x258 0x640 0x000 0x1 0x0
-#define MX6DL_PAD_KEY_ROW0__AUD5_TXD 0x258 0x640 0x7b4 0x2 0x1
-#define MX6DL_PAD_KEY_ROW0__KEY_ROW0 0x258 0x640 0x000 0x3 0x0
-#define MX6DL_PAD_KEY_ROW0__UART4_RX_DATA 0x258 0x640 0x914 0x4 0x3
-#define MX6DL_PAD_KEY_ROW0__UART4_TX_DATA 0x258 0x640 0x000 0x4 0x0
-#define MX6DL_PAD_KEY_ROW0__GPIO4_IO07 0x258 0x640 0x000 0x5 0x0
-#define MX6DL_PAD_KEY_ROW0__DCIC2_OUT 0x258 0x640 0x000 0x6 0x0
-#define MX6DL_PAD_KEY_ROW1__ECSPI1_SS0 0x25c 0x644 0x7e4 0x0 0x3
-#define MX6DL_PAD_KEY_ROW1__ENET_COL 0x25c 0x644 0x000 0x1 0x0
-#define MX6DL_PAD_KEY_ROW1__AUD5_RXD 0x25c 0x644 0x7b0 0x2 0x1
-#define MX6DL_PAD_KEY_ROW1__KEY_ROW1 0x25c 0x644 0x000 0x3 0x0
-#define MX6DL_PAD_KEY_ROW1__UART5_RX_DATA 0x25c 0x644 0x91c 0x4 0x3
-#define MX6DL_PAD_KEY_ROW1__UART5_TX_DATA 0x25c 0x644 0x000 0x4 0x0
-#define MX6DL_PAD_KEY_ROW1__GPIO4_IO09 0x25c 0x644 0x000 0x5 0x0
-#define MX6DL_PAD_KEY_ROW1__SD2_VSELECT 0x25c 0x644 0x000 0x6 0x0
-#define MX6DL_PAD_KEY_ROW2__ECSPI1_SS2 0x260 0x648 0x7ec 0x0 0x1
-#define MX6DL_PAD_KEY_ROW2__ENET_TX_DATA2 0x260 0x648 0x000 0x1 0x0
-#define MX6DL_PAD_KEY_ROW2__FLEXCAN1_RX 0x260 0x648 0x7c8 0x2 0x1
-#define MX6DL_PAD_KEY_ROW2__KEY_ROW2 0x260 0x648 0x000 0x3 0x0
-#define MX6DL_PAD_KEY_ROW2__SD2_VSELECT 0x260 0x648 0x000 0x4 0x0
-#define MX6DL_PAD_KEY_ROW2__GPIO4_IO11 0x260 0x648 0x000 0x5 0x0
-#define MX6DL_PAD_KEY_ROW2__HDMI_TX_CEC_LINE 0x260 0x648 0x85c 0x6 0x1
-#define MX6DL_PAD_KEY_ROW3__ASRC_EXT_CLK 0x264 0x64c 0x794 0x1 0x2
-#define MX6DL_PAD_KEY_ROW3__HDMI_TX_DDC_SDA 0x264 0x64c 0x864 0x2 0x1
-#define MX6DL_PAD_KEY_ROW3__KEY_ROW3 0x264 0x64c 0x000 0x3 0x0
-#define MX6DL_PAD_KEY_ROW3__I2C2_SDA 0x264 0x64c 0x874 0x4 0x1
-#define MX6DL_PAD_KEY_ROW3__GPIO4_IO13 0x264 0x64c 0x000 0x5 0x0
-#define MX6DL_PAD_KEY_ROW3__SD1_VSELECT 0x264 0x64c 0x000 0x6 0x0
-#define MX6DL_PAD_KEY_ROW4__FLEXCAN2_RX 0x268 0x650 0x7cc 0x0 0x0
-#define MX6DL_PAD_KEY_ROW4__IPU1_SISG5 0x268 0x650 0x000 0x1 0x0
-#define MX6DL_PAD_KEY_ROW4__USB_OTG_PWR 0x268 0x650 0x000 0x2 0x0
-#define MX6DL_PAD_KEY_ROW4__KEY_ROW4 0x268 0x650 0x000 0x3 0x0
-#define MX6DL_PAD_KEY_ROW4__UART5_CTS_B 0x268 0x650 0x000 0x4 0x0
-#define MX6DL_PAD_KEY_ROW4__UART5_RTS_B 0x268 0x650 0x918 0x4 0x3
-#define MX6DL_PAD_KEY_ROW4__GPIO4_IO15 0x268 0x650 0x000 0x5 0x0
-#define MX6DL_PAD_NANDF_ALE__NAND_ALE 0x26c 0x654 0x000 0x0 0x0
-#define MX6DL_PAD_NANDF_ALE__SD4_RESET 0x26c 0x654 0x000 0x1 0x0
-#define MX6DL_PAD_NANDF_ALE__GPIO6_IO08 0x26c 0x654 0x000 0x5 0x0
-#define MX6DL_PAD_NANDF_CLE__NAND_CLE 0x270 0x658 0x000 0x0 0x0
-#define MX6DL_PAD_NANDF_CLE__GPIO6_IO07 0x270 0x658 0x000 0x5 0x0
-#define MX6DL_PAD_NANDF_CS0__NAND_CE0_B 0x274 0x65c 0x000 0x0 0x0
-#define MX6DL_PAD_NANDF_CS0__GPIO6_IO11 0x274 0x65c 0x000 0x5 0x0
-#define MX6DL_PAD_NANDF_CS1__NAND_CE1_B 0x278 0x660 0x000 0x0 0x0
-#define MX6DL_PAD_NANDF_CS1__SD4_VSELECT 0x278 0x660 0x000 0x1 0x0
-#define MX6DL_PAD_NANDF_CS1__SD3_VSELECT 0x278 0x660 0x000 0x2 0x0
-#define MX6DL_PAD_NANDF_CS1__GPIO6_IO14 0x278 0x660 0x000 0x5 0x0
-#define MX6DL_PAD_NANDF_CS2__NAND_CE2_B 0x27c 0x664 0x000 0x0 0x0
-#define MX6DL_PAD_NANDF_CS2__IPU1_SISG0 0x27c 0x664 0x000 0x1 0x0
-#define MX6DL_PAD_NANDF_CS2__ESAI_TX0 0x27c 0x664 0x844 0x2 0x1
-#define MX6DL_PAD_NANDF_CS2__EIM_CRE 0x27c 0x664 0x000 0x3 0x0
-#define MX6DL_PAD_NANDF_CS2__CCM_CLKO2 0x27c 0x664 0x000 0x4 0x0
-#define MX6DL_PAD_NANDF_CS2__GPIO6_IO15 0x27c 0x664 0x000 0x5 0x0
-#define MX6DL_PAD_NANDF_CS3__NAND_CE3_B 0x280 0x668 0x000 0x0 0x0
-#define MX6DL_PAD_NANDF_CS3__IPU1_SISG1 0x280 0x668 0x000 0x1 0x0
-#define MX6DL_PAD_NANDF_CS3__ESAI_TX1 0x280 0x668 0x848 0x2 0x1
-#define MX6DL_PAD_NANDF_CS3__EIM_ADDR26 0x280 0x668 0x000 0x3 0x0
-#define MX6DL_PAD_NANDF_CS3__GPIO6_IO16 0x280 0x668 0x000 0x5 0x0
-#define MX6DL_PAD_NANDF_CS3__I2C4_SDA 0x280 0x668 0x884 0x9 0x2
-#define MX6DL_PAD_NANDF_D0__NAND_DATA00 0x284 0x66c 0x000 0x0 0x0
-#define MX6DL_PAD_NANDF_D0__SD1_DATA4 0x284 0x66c 0x000 0x1 0x0
-#define MX6DL_PAD_NANDF_D0__GPIO2_IO00 0x284 0x66c 0x000 0x5 0x0
-#define MX6DL_PAD_NANDF_D1__NAND_DATA01 0x288 0x670 0x000 0x0 0x0
-#define MX6DL_PAD_NANDF_D1__SD1_DATA5 0x288 0x670 0x000 0x1 0x0
-#define MX6DL_PAD_NANDF_D1__GPIO2_IO01 0x288 0x670 0x000 0x5 0x0
-#define MX6DL_PAD_NANDF_D2__NAND_DATA02 0x28c 0x674 0x000 0x0 0x0
-#define MX6DL_PAD_NANDF_D2__SD1_DATA6 0x28c 0x674 0x000 0x1 0x0
-#define MX6DL_PAD_NANDF_D2__GPIO2_IO02 0x28c 0x674 0x000 0x5 0x0
-#define MX6DL_PAD_NANDF_D3__NAND_DATA03 0x290 0x678 0x000 0x0 0x0
-#define MX6DL_PAD_NANDF_D3__SD1_DATA7 0x290 0x678 0x000 0x1 0x0
-#define MX6DL_PAD_NANDF_D3__GPIO2_IO03 0x290 0x678 0x000 0x5 0x0
-#define MX6DL_PAD_NANDF_D4__NAND_DATA04 0x294 0x67c 0x000 0x0 0x0
-#define MX6DL_PAD_NANDF_D4__SD2_DATA4 0x294 0x67c 0x000 0x1 0x0
-#define MX6DL_PAD_NANDF_D4__GPIO2_IO04 0x294 0x67c 0x000 0x5 0x0
-#define MX6DL_PAD_NANDF_D5__NAND_DATA05 0x298 0x680 0x000 0x0 0x0
-#define MX6DL_PAD_NANDF_D5__SD2_DATA5 0x298 0x680 0x000 0x1 0x0
-#define MX6DL_PAD_NANDF_D5__GPIO2_IO05 0x298 0x680 0x000 0x5 0x0
-#define MX6DL_PAD_NANDF_D6__NAND_DATA06 0x29c 0x684 0x000 0x0 0x0
-#define MX6DL_PAD_NANDF_D6__SD2_DATA6 0x29c 0x684 0x000 0x1 0x0
-#define MX6DL_PAD_NANDF_D6__GPIO2_IO06 0x29c 0x684 0x000 0x5 0x0
-#define MX6DL_PAD_NANDF_D7__NAND_DATA07 0x2a0 0x688 0x000 0x0 0x0
-#define MX6DL_PAD_NANDF_D7__SD2_DATA7 0x2a0 0x688 0x000 0x1 0x0
-#define MX6DL_PAD_NANDF_D7__GPIO2_IO07 0x2a0 0x688 0x000 0x5 0x0
-#define MX6DL_PAD_NANDF_RB0__NAND_READY_B 0x2a4 0x68c 0x000 0x0 0x0
-#define MX6DL_PAD_NANDF_RB0__GPIO6_IO10 0x2a4 0x68c 0x000 0x5 0x0
-#define MX6DL_PAD_NANDF_WP_B__NAND_WP_B 0x2a8 0x690 0x000 0x0 0x0
-#define MX6DL_PAD_NANDF_WP_B__GPIO6_IO09 0x2a8 0x690 0x000 0x5 0x0
-#define MX6DL_PAD_NANDF_WP_B__I2C4_SCL 0x2a8 0x690 0x880 0x9 0x2
-#define MX6DL_PAD_RGMII_RD0__HSI_RX_READY 0x2ac 0x694 0x000 0x0 0x0
-#define MX6DL_PAD_RGMII_RD0__RGMII_RD0 0x2ac 0x694 0x818 0x1 0x1
-#define MX6DL_PAD_RGMII_RD0__GPIO6_IO25 0x2ac 0x694 0x000 0x5 0x0
-#define MX6DL_PAD_RGMII_RD1__HSI_TX_FLAG 0x2b0 0x698 0x000 0x0 0x0
-#define MX6DL_PAD_RGMII_RD1__RGMII_RD1 0x2b0 0x698 0x81c 0x1 0x1
-#define MX6DL_PAD_RGMII_RD1__GPIO6_IO27 0x2b0 0x698 0x000 0x5 0x0
-#define MX6DL_PAD_RGMII_RD2__HSI_TX_DATA 0x2b4 0x69c 0x000 0x0 0x0
-#define MX6DL_PAD_RGMII_RD2__RGMII_RD2 0x2b4 0x69c 0x820 0x1 0x1
-#define MX6DL_PAD_RGMII_RD2__GPIO6_IO28 0x2b4 0x69c 0x000 0x5 0x0
-#define MX6DL_PAD_RGMII_RD3__HSI_TX_WAKE 0x2b8 0x6a0 0x000 0x0 0x0
-#define MX6DL_PAD_RGMII_RD3__RGMII_RD3 0x2b8 0x6a0 0x824 0x1 0x1
-#define MX6DL_PAD_RGMII_RD3__GPIO6_IO29 0x2b8 0x6a0 0x000 0x5 0x0
-#define MX6DL_PAD_RGMII_RX_CTL__USB_H3_DATA 0x2bc 0x6a4 0x000 0x0 0x0
-#define MX6DL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x2bc 0x6a4 0x828 0x1 0x1
-#define MX6DL_PAD_RGMII_RX_CTL__GPIO6_IO24 0x2bc 0x6a4 0x000 0x5 0x0
-#define MX6DL_PAD_RGMII_RXC__USB_H3_STROBE 0x2c0 0x6a8 0x000 0x0 0x0
-#define MX6DL_PAD_RGMII_RXC__RGMII_RXC 0x2c0 0x6a8 0x814 0x1 0x1
-#define MX6DL_PAD_RGMII_RXC__GPIO6_IO30 0x2c0 0x6a8 0x000 0x5 0x0
-#define MX6DL_PAD_RGMII_TD0__HSI_TX_READY 0x2c4 0x6ac 0x000 0x0 0x0
-#define MX6DL_PAD_RGMII_TD0__RGMII_TD0 0x2c4 0x6ac 0x000 0x1 0x0
-#define MX6DL_PAD_RGMII_TD0__GPIO6_IO20 0x2c4 0x6ac 0x000 0x5 0x0
-#define MX6DL_PAD_RGMII_TD1__HSI_RX_FLAG 0x2c8 0x6b0 0x000 0x0 0x0
-#define MX6DL_PAD_RGMII_TD1__RGMII_TD1 0x2c8 0x6b0 0x000 0x1 0x0
-#define MX6DL_PAD_RGMII_TD1__GPIO6_IO21 0x2c8 0x6b0 0x000 0x5 0x0
-#define MX6DL_PAD_RGMII_TD2__HSI_RX_DATA 0x2cc 0x6b4 0x000 0x0 0x0
-#define MX6DL_PAD_RGMII_TD2__RGMII_TD2 0x2cc 0x6b4 0x000 0x1 0x0
-#define MX6DL_PAD_RGMII_TD2__GPIO6_IO22 0x2cc 0x6b4 0x000 0x5 0x0
-#define MX6DL_PAD_RGMII_TD3__HSI_RX_WAKE 0x2d0 0x6b8 0x000 0x0 0x0
-#define MX6DL_PAD_RGMII_TD3__RGMII_TD3 0x2d0 0x6b8 0x000 0x1 0x0
-#define MX6DL_PAD_RGMII_TD3__GPIO6_IO23 0x2d0 0x6b8 0x000 0x5 0x0
-#define MX6DL_PAD_RGMII_TX_CTL__USB_H2_STROBE 0x2d4 0x6bc 0x000 0x0 0x0
-#define MX6DL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x2d4 0x6bc 0x000 0x1 0x0
-#define MX6DL_PAD_RGMII_TX_CTL__GPIO6_IO26 0x2d4 0x6bc 0x000 0x5 0x0
-#define MX6DL_PAD_RGMII_TX_CTL__ENET_REF_CLK 0x2d4 0x6bc 0x80c 0x7 0x1
-#define MX6DL_PAD_RGMII_TXC__USB_H2_DATA 0x2d8 0x6c0 0x000 0x0 0x0
-#define MX6DL_PAD_RGMII_TXC__RGMII_TXC 0x2d8 0x6c0 0x000 0x1 0x0
-#define MX6DL_PAD_RGMII_TXC__SPDIF_EXT_CLK 0x2d8 0x6c0 0x8f4 0x2 0x1
-#define MX6DL_PAD_RGMII_TXC__GPIO6_IO19 0x2d8 0x6c0 0x000 0x5 0x0
-#define MX6DL_PAD_RGMII_TXC__XTALOSC_REF_CLK_24M 0x2d8 0x6c0 0x000 0x7 0x0
-#define MX6DL_PAD_SD1_CLK__SD1_CLK 0x2dc 0x6c4 0x928 0x0 0x1
-#define MX6DL_PAD_SD1_CLK__GPT_CLKIN 0x2dc 0x6c4 0x000 0x3 0x0
-#define MX6DL_PAD_SD1_CLK__GPIO1_IO20 0x2dc 0x6c4 0x000 0x5 0x0
-#define MX6DL_PAD_SD1_CMD__SD1_CMD 0x2e0 0x6c8 0x000 0x0 0x0
-#define MX6DL_PAD_SD1_CMD__PWM4_OUT 0x2e0 0x6c8 0x000 0x2 0x0
-#define MX6DL_PAD_SD1_CMD__GPT_COMPARE1 0x2e0 0x6c8 0x000 0x3 0x0
-#define MX6DL_PAD_SD1_CMD__GPIO1_IO18 0x2e0 0x6c8 0x000 0x5 0x0
-#define MX6DL_PAD_SD1_DAT0__SD1_DATA0 0x2e4 0x6cc 0x000 0x0 0x0
-#define MX6DL_PAD_SD1_DAT0__GPT_CAPTURE1 0x2e4 0x6cc 0x000 0x3 0x0
-#define MX6DL_PAD_SD1_DAT0__GPIO1_IO16 0x2e4 0x6cc 0x000 0x5 0x0
-#define MX6DL_PAD_SD1_DAT1__SD1_DATA1 0x2e8 0x6d0 0x000 0x0 0x0
-#define MX6DL_PAD_SD1_DAT1__PWM3_OUT 0x2e8 0x6d0 0x000 0x2 0x0
-#define MX6DL_PAD_SD1_DAT1__GPT_CAPTURE2 0x2e8 0x6d0 0x000 0x3 0x0
-#define MX6DL_PAD_SD1_DAT1__GPIO1_IO17 0x2e8 0x6d0 0x000 0x5 0x0
-#define MX6DL_PAD_SD1_DAT2__SD1_DATA2 0x2ec 0x6d4 0x000 0x0 0x0
-#define MX6DL_PAD_SD1_DAT2__GPT_COMPARE2 0x2ec 0x6d4 0x000 0x2 0x0
-#define MX6DL_PAD_SD1_DAT2__PWM2_OUT 0x2ec 0x6d4 0x000 0x3 0x0
-#define MX6DL_PAD_SD1_DAT2__WDOG1_B 0x2ec 0x6d4 0x000 0x4 0x0
-#define MX6DL_PAD_SD1_DAT2__GPIO1_IO19 0x2ec 0x6d4 0x000 0x5 0x0
-#define MX6DL_PAD_SD1_DAT2__WDOG1_RESET_B_DEB 0x2ec 0x6d4 0x000 0x6 0x0
-#define MX6DL_PAD_SD1_DAT3__SD1_DATA3 0x2f0 0x6d8 0x000 0x0 0x0
-#define MX6DL_PAD_SD1_DAT3__GPT_COMPARE3 0x2f0 0x6d8 0x000 0x2 0x0
-#define MX6DL_PAD_SD1_DAT3__PWM1_OUT 0x2f0 0x6d8 0x000 0x3 0x0
-#define MX6DL_PAD_SD1_DAT3__WDOG2_B 0x2f0 0x6d8 0x000 0x4 0x0
-#define MX6DL_PAD_SD1_DAT3__GPIO1_IO21 0x2f0 0x6d8 0x000 0x5 0x0
-#define MX6DL_PAD_SD1_DAT3__WDOG2_RESET_B_DEB 0x2f0 0x6d8 0x000 0x6 0x0
-#define MX6DL_PAD_SD2_CLK__SD2_CLK 0x2f4 0x6dc 0x930 0x0 0x1
-#define MX6DL_PAD_SD2_CLK__KEY_COL5 0x2f4 0x6dc 0x8c0 0x2 0x3
-#define MX6DL_PAD_SD2_CLK__AUD4_RXFS 0x2f4 0x6dc 0x7a4 0x3 0x1
-#define MX6DL_PAD_SD2_CLK__GPIO1_IO10 0x2f4 0x6dc 0x000 0x5 0x0
-#define MX6DL_PAD_SD2_CMD__SD2_CMD 0x2f8 0x6e0 0x000 0x0 0x0
-#define MX6DL_PAD_SD2_CMD__KEY_ROW5 0x2f8 0x6e0 0x8cc 0x2 0x2
-#define MX6DL_PAD_SD2_CMD__AUD4_RXC 0x2f8 0x6e0 0x7a0 0x3 0x1
-#define MX6DL_PAD_SD2_CMD__GPIO1_IO11 0x2f8 0x6e0 0x000 0x5 0x0
-#define MX6DL_PAD_SD2_DAT0__SD2_DATA0 0x2fc 0x6e4 0x000 0x0 0x0
-#define MX6DL_PAD_SD2_DAT0__AUD4_RXD 0x2fc 0x6e4 0x798 0x3 0x1
-#define MX6DL_PAD_SD2_DAT0__KEY_ROW7 0x2fc 0x6e4 0x8d4 0x4 0x2
-#define MX6DL_PAD_SD2_DAT0__GPIO1_IO15 0x2fc 0x6e4 0x000 0x5 0x0
-#define MX6DL_PAD_SD2_DAT0__DCIC2_OUT 0x2fc 0x6e4 0x000 0x6 0x0
-#define MX6DL_PAD_SD2_DAT1__SD2_DATA1 0x300 0x6e8 0x000 0x0 0x0
-#define MX6DL_PAD_SD2_DAT1__EIM_CS2_B 0x300 0x6e8 0x000 0x2 0x0
-#define MX6DL_PAD_SD2_DAT1__AUD4_TXFS 0x300 0x6e8 0x7ac 0x3 0x1
-#define MX6DL_PAD_SD2_DAT1__KEY_COL7 0x300 0x6e8 0x8c8 0x4 0x2
-#define MX6DL_PAD_SD2_DAT1__GPIO1_IO14 0x300 0x6e8 0x000 0x5 0x0
-#define MX6DL_PAD_SD2_DAT2__SD2_DATA2 0x304 0x6ec 0x000 0x0 0x0
-#define MX6DL_PAD_SD2_DAT2__EIM_CS3_B 0x304 0x6ec 0x000 0x2 0x0
-#define MX6DL_PAD_SD2_DAT2__AUD4_TXD 0x304 0x6ec 0x79c 0x3 0x1
-#define MX6DL_PAD_SD2_DAT2__KEY_ROW6 0x304 0x6ec 0x8d0 0x4 0x2
-#define MX6DL_PAD_SD2_DAT2__GPIO1_IO13 0x304 0x6ec 0x000 0x5 0x0
-#define MX6DL_PAD_SD2_DAT3__SD2_DATA3 0x308 0x6f0 0x000 0x0 0x0
-#define MX6DL_PAD_SD2_DAT3__KEY_COL6 0x308 0x6f0 0x8c4 0x2 0x2
-#define MX6DL_PAD_SD2_DAT3__AUD4_TXC 0x308 0x6f0 0x7a8 0x3 0x1
-#define MX6DL_PAD_SD2_DAT3__GPIO1_IO12 0x308 0x6f0 0x000 0x5 0x0
-#define MX6DL_PAD_SD3_CLK__SD3_CLK 0x30c 0x6f4 0x934 0x0 0x1
-#define MX6DL_PAD_SD3_CLK__UART2_RTS_B 0x30c 0x6f4 0x900 0x1 0x2
-#define MX6DL_PAD_SD3_CLK__UART2_CTS_B 0x30c 0x6f4 0x000 0x1 0x0
-#define MX6DL_PAD_SD3_CLK__FLEXCAN1_RX 0x30c 0x6f4 0x7c8 0x2 0x2
-#define MX6DL_PAD_SD3_CLK__GPIO7_IO03 0x30c 0x6f4 0x000 0x5 0x0
-#define MX6DL_PAD_SD3_CMD__SD3_CMD 0x310 0x6f8 0x000 0x0 0x0
-#define MX6DL_PAD_SD3_CMD__UART2_CTS_B 0x310 0x6f8 0x000 0x1 0x0
-#define MX6DL_PAD_SD3_CMD__UART2_RTS_B 0x310 0x6f8 0x900 0x1 0x3
-#define MX6DL_PAD_SD3_CMD__FLEXCAN1_TX 0x310 0x6f8 0x000 0x2 0x0
-#define MX6DL_PAD_SD3_CMD__GPIO7_IO02 0x310 0x6f8 0x000 0x5 0x0
-#define MX6DL_PAD_SD3_DAT0__SD3_DATA0 0x314 0x6fc 0x000 0x0 0x0
-#define MX6DL_PAD_SD3_DAT0__UART1_CTS_B 0x314 0x6fc 0x000 0x1 0x0
-#define MX6DL_PAD_SD3_DAT0__UART1_RTS_B 0x314 0x6fc 0x8f8 0x1 0x2
-#define MX6DL_PAD_SD3_DAT0__FLEXCAN2_TX 0x314 0x6fc 0x000 0x2 0x0
-#define MX6DL_PAD_SD3_DAT0__GPIO7_IO04 0x314 0x6fc 0x000 0x5 0x0
-#define MX6DL_PAD_SD3_DAT1__SD3_DATA1 0x318 0x700 0x000 0x0 0x0
-#define MX6DL_PAD_SD3_DAT1__UART1_RTS_B 0x318 0x700 0x8f8 0x1 0x3
-#define MX6DL_PAD_SD3_DAT1__UART1_CTS_B 0x318 0x700 0x000 0x1 0x0
-#define MX6DL_PAD_SD3_DAT1__FLEXCAN2_RX 0x318 0x700 0x7cc 0x2 0x1
-#define MX6DL_PAD_SD3_DAT1__GPIO7_IO05 0x318 0x700 0x000 0x5 0x0
-#define MX6DL_PAD_SD3_DAT2__SD3_DATA2 0x31c 0x704 0x000 0x0 0x0
-#define MX6DL_PAD_SD3_DAT2__GPIO7_IO06 0x31c 0x704 0x000 0x5 0x0
-#define MX6DL_PAD_SD3_DAT3__SD3_DATA3 0x320 0x708 0x000 0x0 0x0
-#define MX6DL_PAD_SD3_DAT3__UART3_CTS_B 0x320 0x708 0x000 0x1 0x0
-#define MX6DL_PAD_SD3_DAT3__UART3_RTS_B 0x320 0x708 0x908 0x1 0x4
-#define MX6DL_PAD_SD3_DAT3__GPIO7_IO07 0x320 0x708 0x000 0x5 0x0
-#define MX6DL_PAD_SD3_DAT4__SD3_DATA4 0x324 0x70c 0x000 0x0 0x0
-#define MX6DL_PAD_SD3_DAT4__UART2_RX_DATA 0x324 0x70c 0x904 0x1 0x4
-#define MX6DL_PAD_SD3_DAT4__UART2_TX_DATA 0x324 0x70c 0x000 0x1 0x0
-#define MX6DL_PAD_SD3_DAT4__GPIO7_IO01 0x324 0x70c 0x000 0x5 0x0
-#define MX6DL_PAD_SD3_DAT5__SD3_DATA5 0x328 0x710 0x000 0x0 0x0
-#define MX6DL_PAD_SD3_DAT5__UART2_TX_DATA 0x328 0x710 0x000 0x1 0x0
-#define MX6DL_PAD_SD3_DAT5__UART2_RX_DATA 0x328 0x710 0x904 0x1 0x5
-#define MX6DL_PAD_SD3_DAT5__GPIO7_IO00 0x328 0x710 0x000 0x5 0x0
-#define MX6DL_PAD_SD3_DAT6__SD3_DATA6 0x32c 0x714 0x000 0x0 0x0
-#define MX6DL_PAD_SD3_DAT6__UART1_RX_DATA 0x32c 0x714 0x8fc 0x1 0x2
-#define MX6DL_PAD_SD3_DAT6__UART1_TX_DATA 0x32c 0x714 0x000 0x1 0x0
-#define MX6DL_PAD_SD3_DAT6__GPIO6_IO18 0x32c 0x714 0x000 0x5 0x0
-#define MX6DL_PAD_SD3_DAT7__SD3_DATA7 0x330 0x718 0x000 0x0 0x0
-#define MX6DL_PAD_SD3_DAT7__UART1_TX_DATA 0x330 0x718 0x000 0x1 0x0
-#define MX6DL_PAD_SD3_DAT7__UART1_RX_DATA 0x330 0x718 0x8fc 0x1 0x3
-#define MX6DL_PAD_SD3_DAT7__GPIO6_IO17 0x330 0x718 0x000 0x5 0x0
-#define MX6DL_PAD_SD3_RST__SD3_RESET 0x334 0x71c 0x000 0x0 0x0
-#define MX6DL_PAD_SD3_RST__UART3_RTS_B 0x334 0x71c 0x908 0x1 0x5
-#define MX6DL_PAD_SD3_RST__UART3_CTS_B 0x334 0x71c 0x000 0x1 0x0
-#define MX6DL_PAD_SD3_RST__GPIO7_IO08 0x334 0x71c 0x000 0x5 0x0
-#define MX6DL_PAD_SD4_CLK__SD4_CLK 0x338 0x720 0x938 0x0 0x1
-#define MX6DL_PAD_SD4_CLK__NAND_WE_B 0x338 0x720 0x000 0x1 0x0
-#define MX6DL_PAD_SD4_CLK__UART3_RX_DATA 0x338 0x720 0x90c 0x2 0x2
-#define MX6DL_PAD_SD4_CLK__UART3_TX_DATA 0x338 0x720 0x000 0x2 0x0
-#define MX6DL_PAD_SD4_CLK__GPIO7_IO10 0x338 0x720 0x000 0x5 0x0
-#define MX6DL_PAD_SD4_CMD__SD4_CMD 0x33c 0x724 0x000 0x0 0x0
-#define MX6DL_PAD_SD4_CMD__NAND_RE_B 0x33c 0x724 0x000 0x1 0x0
-#define MX6DL_PAD_SD4_CMD__UART3_TX_DATA 0x33c 0x724 0x000 0x2 0x0
-#define MX6DL_PAD_SD4_CMD__UART3_RX_DATA 0x33c 0x724 0x90c 0x2 0x3
-#define MX6DL_PAD_SD4_CMD__GPIO7_IO09 0x33c 0x724 0x000 0x5 0x0
-#define MX6DL_PAD_SD4_DAT0__SD4_DATA0 0x340 0x728 0x000 0x1 0x0
-#define MX6DL_PAD_SD4_DAT0__NAND_DQS 0x340 0x728 0x000 0x2 0x0
-#define MX6DL_PAD_SD4_DAT0__GPIO2_IO08 0x340 0x728 0x000 0x5 0x0
-#define MX6DL_PAD_SD4_DAT1__SD4_DATA1 0x344 0x72c 0x000 0x1 0x0
-#define MX6DL_PAD_SD4_DAT1__PWM3_OUT 0x344 0x72c 0x000 0x2 0x0
-#define MX6DL_PAD_SD4_DAT1__GPIO2_IO09 0x344 0x72c 0x000 0x5 0x0
-#define MX6DL_PAD_SD4_DAT2__SD4_DATA2 0x348 0x730 0x000 0x1 0x0
-#define MX6DL_PAD_SD4_DAT2__PWM4_OUT 0x348 0x730 0x000 0x2 0x0
-#define MX6DL_PAD_SD4_DAT2__GPIO2_IO10 0x348 0x730 0x000 0x5 0x0
-#define MX6DL_PAD_SD4_DAT3__SD4_DATA3 0x34c 0x734 0x000 0x1 0x0
-#define MX6DL_PAD_SD4_DAT3__GPIO2_IO11 0x34c 0x734 0x000 0x5 0x0
-#define MX6DL_PAD_SD4_DAT4__SD4_DATA4 0x350 0x738 0x000 0x1 0x0
-#define MX6DL_PAD_SD4_DAT4__UART2_RX_DATA 0x350 0x738 0x904 0x2 0x6
-#define MX6DL_PAD_SD4_DAT4__UART2_TX_DATA 0x350 0x738 0x000 0x2 0x0
-#define MX6DL_PAD_SD4_DAT4__GPIO2_IO12 0x350 0x738 0x000 0x5 0x0
-#define MX6DL_PAD_SD4_DAT5__SD4_DATA5 0x354 0x73c 0x000 0x1 0x0
-#define MX6DL_PAD_SD4_DAT5__UART2_RTS_B 0x354 0x73c 0x900 0x2 0x4
-#define MX6DL_PAD_SD4_DAT5__UART2_CTS_B 0x354 0x73c 0x000 0x2 0x0
-#define MX6DL_PAD_SD4_DAT5__GPIO2_IO13 0x354 0x73c 0x000 0x5 0x0
-#define MX6DL_PAD_SD4_DAT6__SD4_DATA6 0x358 0x740 0x000 0x1 0x0
-#define MX6DL_PAD_SD4_DAT6__UART2_CTS_B 0x358 0x740 0x000 0x2 0x0
-#define MX6DL_PAD_SD4_DAT6__UART2_RTS_B 0x358 0x740 0x900 0x2 0x5
-#define MX6DL_PAD_SD4_DAT6__GPIO2_IO14 0x358 0x740 0x000 0x5 0x0
-#define MX6DL_PAD_SD4_DAT7__SD4_DATA7 0x35c 0x744 0x000 0x1 0x0
-#define MX6DL_PAD_SD4_DAT7__UART2_TX_DATA 0x35c 0x744 0x000 0x2 0x0
-#define MX6DL_PAD_SD4_DAT7__UART2_RX_DATA 0x35c 0x744 0x904 0x2 0x7
-#define MX6DL_PAD_SD4_DAT7__GPIO2_IO15 0x35c 0x744 0x000 0x5 0x0
+#define MX6QDL_PAD_CSI0_DAT10__IPU1_CSI0_DATA10 0x04c 0x360 0x000 0x0 0x0
+#define MX6QDL_PAD_CSI0_DAT10__AUD3_RXC 0x04c 0x360 0x000 0x1 0x0
+#define MX6QDL_PAD_CSI0_DAT10__ECSPI2_MISO 0x04c 0x360 0x7f8 0x2 0x0
+#define MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x04c 0x360 0x000 0x3 0x0
+#define MX6QDL_PAD_CSI0_DAT10__UART1_RX_DATA 0x04c 0x360 0x8fc 0x3 0x0
+#define MX6QDL_PAD_CSI0_DAT10__GPIO5_IO28 0x04c 0x360 0x000 0x5 0x0
+#define MX6QDL_PAD_CSI0_DAT10__ARM_TRACE07 0x04c 0x360 0x000 0x7 0x0
+#define MX6QDL_PAD_CSI0_DAT11__IPU1_CSI0_DATA11 0x050 0x364 0x000 0x0 0x0
+#define MX6QDL_PAD_CSI0_DAT11__AUD3_RXFS 0x050 0x364 0x000 0x1 0x0
+#define MX6QDL_PAD_CSI0_DAT11__ECSPI2_SS0 0x050 0x364 0x800 0x2 0x0
+#define MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x050 0x364 0x8fc 0x3 0x1
+#define MX6QDL_PAD_CSI0_DAT11__UART1_TX_DATA 0x050 0x364 0x000 0x3 0x0
+#define MX6QDL_PAD_CSI0_DAT11__GPIO5_IO29 0x050 0x364 0x000 0x5 0x0
+#define MX6QDL_PAD_CSI0_DAT11__ARM_TRACE08 0x050 0x364 0x000 0x7 0x0
+#define MX6QDL_PAD_CSI0_DAT12__IPU1_CSI0_DATA12 0x054 0x368 0x000 0x0 0x0
+#define MX6QDL_PAD_CSI0_DAT12__EIM_DATA08 0x054 0x368 0x000 0x1 0x0
+#define MX6QDL_PAD_CSI0_DAT12__UART4_TX_DATA 0x054 0x368 0x000 0x3 0x0
+#define MX6QDL_PAD_CSI0_DAT12__UART4_RX_DATA 0x054 0x368 0x914 0x3 0x0
+#define MX6QDL_PAD_CSI0_DAT12__GPIO5_IO30 0x054 0x368 0x000 0x5 0x0
+#define MX6QDL_PAD_CSI0_DAT12__ARM_TRACE09 0x054 0x368 0x000 0x7 0x0
+#define MX6QDL_PAD_CSI0_DAT13__IPU1_CSI0_DATA13 0x058 0x36c 0x000 0x0 0x0
+#define MX6QDL_PAD_CSI0_DAT13__EIM_DATA09 0x058 0x36c 0x000 0x1 0x0
+#define MX6QDL_PAD_CSI0_DAT13__UART4_RX_DATA 0x058 0x36c 0x914 0x3 0x1
+#define MX6QDL_PAD_CSI0_DAT13__UART4_TX_DATA 0x058 0x36c 0x000 0x3 0x0
+#define MX6QDL_PAD_CSI0_DAT13__GPIO5_IO31 0x058 0x36c 0x000 0x5 0x0
+#define MX6QDL_PAD_CSI0_DAT13__ARM_TRACE10 0x058 0x36c 0x000 0x7 0x0
+#define MX6QDL_PAD_CSI0_DAT14__IPU1_CSI0_DATA14 0x05c 0x370 0x000 0x0 0x0
+#define MX6QDL_PAD_CSI0_DAT14__EIM_DATA10 0x05c 0x370 0x000 0x1 0x0
+#define MX6QDL_PAD_CSI0_DAT14__UART5_TX_DATA 0x05c 0x370 0x000 0x3 0x0
+#define MX6QDL_PAD_CSI0_DAT14__UART5_RX_DATA 0x05c 0x370 0x91c 0x3 0x0
+#define MX6QDL_PAD_CSI0_DAT14__GPIO6_IO00 0x05c 0x370 0x000 0x5 0x0
+#define MX6QDL_PAD_CSI0_DAT14__ARM_TRACE11 0x05c 0x370 0x000 0x7 0x0
+#define MX6QDL_PAD_CSI0_DAT15__IPU1_CSI0_DATA15 0x060 0x374 0x000 0x0 0x0
+#define MX6QDL_PAD_CSI0_DAT15__EIM_DATA11 0x060 0x374 0x000 0x1 0x0
+#define MX6QDL_PAD_CSI0_DAT15__UART5_RX_DATA 0x060 0x374 0x91c 0x3 0x1
+#define MX6QDL_PAD_CSI0_DAT15__UART5_TX_DATA 0x060 0x374 0x000 0x3 0x0
+#define MX6QDL_PAD_CSI0_DAT15__GPIO6_IO01 0x060 0x374 0x000 0x5 0x0
+#define MX6QDL_PAD_CSI0_DAT15__ARM_TRACE12 0x060 0x374 0x000 0x7 0x0
+#define MX6QDL_PAD_CSI0_DAT16__IPU1_CSI0_DATA16 0x064 0x378 0x000 0x0 0x0
+#define MX6QDL_PAD_CSI0_DAT16__EIM_DATA12 0x064 0x378 0x000 0x1 0x0
+#define MX6QDL_PAD_CSI0_DAT16__UART4_RTS_B 0x064 0x378 0x910 0x3 0x0
+#define MX6QDL_PAD_CSI0_DAT16__UART4_CTS_B 0x064 0x378 0x000 0x3 0x0
+#define MX6QDL_PAD_CSI0_DAT16__GPIO6_IO02 0x064 0x378 0x000 0x5 0x0
+#define MX6QDL_PAD_CSI0_DAT16__ARM_TRACE13 0x064 0x378 0x000 0x7 0x0
+#define MX6QDL_PAD_CSI0_DAT17__IPU1_CSI0_DATA17 0x068 0x37c 0x000 0x0 0x0
+#define MX6QDL_PAD_CSI0_DAT17__EIM_DATA13 0x068 0x37c 0x000 0x1 0x0
+#define MX6QDL_PAD_CSI0_DAT17__UART4_CTS_B 0x068 0x37c 0x000 0x3 0x0
+#define MX6QDL_PAD_CSI0_DAT17__UART4_RTS_B 0x068 0x37c 0x910 0x3 0x1
+#define MX6QDL_PAD_CSI0_DAT17__GPIO6_IO03 0x068 0x37c 0x000 0x5 0x0
+#define MX6QDL_PAD_CSI0_DAT17__ARM_TRACE14 0x068 0x37c 0x000 0x7 0x0
+#define MX6QDL_PAD_CSI0_DAT18__IPU1_CSI0_DATA18 0x06c 0x380 0x000 0x0 0x0
+#define MX6QDL_PAD_CSI0_DAT18__EIM_DATA14 0x06c 0x380 0x000 0x1 0x0
+#define MX6QDL_PAD_CSI0_DAT18__UART5_RTS_B 0x06c 0x380 0x918 0x3 0x0
+#define MX6QDL_PAD_CSI0_DAT18__UART5_CTS_B 0x06c 0x380 0x000 0x3 0x0
+#define MX6QDL_PAD_CSI0_DAT18__GPIO6_IO04 0x06c 0x380 0x000 0x5 0x0
+#define MX6QDL_PAD_CSI0_DAT18__ARM_TRACE15 0x06c 0x380 0x000 0x7 0x0
+#define MX6QDL_PAD_CSI0_DAT19__IPU1_CSI0_DATA19 0x070 0x384 0x000 0x0 0x0
+#define MX6QDL_PAD_CSI0_DAT19__EIM_DATA15 0x070 0x384 0x000 0x1 0x0
+#define MX6QDL_PAD_CSI0_DAT19__UART5_CTS_B 0x070 0x384 0x000 0x3 0x0
+#define MX6QDL_PAD_CSI0_DAT19__UART5_RTS_B 0x070 0x384 0x918 0x3 0x1
+#define MX6QDL_PAD_CSI0_DAT19__GPIO6_IO05 0x070 0x384 0x000 0x5 0x0
+#define MX6QDL_PAD_CSI0_DAT4__IPU1_CSI0_DATA04 0x074 0x388 0x000 0x0 0x0
+#define MX6QDL_PAD_CSI0_DAT4__EIM_DATA02 0x074 0x388 0x000 0x1 0x0
+#define MX6QDL_PAD_CSI0_DAT4__ECSPI1_SCLK 0x074 0x388 0x7d8 0x2 0x0
+#define MX6QDL_PAD_CSI0_DAT4__KEY_COL5 0x074 0x388 0x8c0 0x3 0x0
+#define MX6QDL_PAD_CSI0_DAT4__AUD3_TXC 0x074 0x388 0x000 0x4 0x0
+#define MX6QDL_PAD_CSI0_DAT4__GPIO5_IO22 0x074 0x388 0x000 0x5 0x0
+#define MX6QDL_PAD_CSI0_DAT4__ARM_TRACE01 0x074 0x388 0x000 0x7 0x0
+#define MX6QDL_PAD_CSI0_DAT5__IPU1_CSI0_DATA05 0x078 0x38c 0x000 0x0 0x0
+#define MX6QDL_PAD_CSI0_DAT5__EIM_DATA03 0x078 0x38c 0x000 0x1 0x0
+#define MX6QDL_PAD_CSI0_DAT5__ECSPI1_MOSI 0x078 0x38c 0x7e0 0x2 0x0
+#define MX6QDL_PAD_CSI0_DAT5__KEY_ROW5 0x078 0x38c 0x8cc 0x3 0x0
+#define MX6QDL_PAD_CSI0_DAT5__AUD3_TXD 0x078 0x38c 0x000 0x4 0x0
+#define MX6QDL_PAD_CSI0_DAT5__GPIO5_IO23 0x078 0x38c 0x000 0x5 0x0
+#define MX6QDL_PAD_CSI0_DAT5__ARM_TRACE02 0x078 0x38c 0x000 0x7 0x0
+#define MX6QDL_PAD_CSI0_DAT6__IPU1_CSI0_DATA06 0x07c 0x390 0x000 0x0 0x0
+#define MX6QDL_PAD_CSI0_DAT6__EIM_DATA04 0x07c 0x390 0x000 0x1 0x0
+#define MX6QDL_PAD_CSI0_DAT6__ECSPI1_MISO 0x07c 0x390 0x7dc 0x2 0x0
+#define MX6QDL_PAD_CSI0_DAT6__KEY_COL6 0x07c 0x390 0x8c4 0x3 0x0
+#define MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS 0x07c 0x390 0x000 0x4 0x0
+#define MX6QDL_PAD_CSI0_DAT6__GPIO5_IO24 0x07c 0x390 0x000 0x5 0x0
+#define MX6QDL_PAD_CSI0_DAT6__ARM_TRACE03 0x07c 0x390 0x000 0x7 0x0
+#define MX6QDL_PAD_CSI0_DAT7__IPU1_CSI0_DATA07 0x080 0x394 0x000 0x0 0x0
+#define MX6QDL_PAD_CSI0_DAT7__EIM_DATA05 0x080 0x394 0x000 0x1 0x0
+#define MX6QDL_PAD_CSI0_DAT7__ECSPI1_SS0 0x080 0x394 0x7e4 0x2 0x0
+#define MX6QDL_PAD_CSI0_DAT7__KEY_ROW6 0x080 0x394 0x8d0 0x3 0x0
+#define MX6QDL_PAD_CSI0_DAT7__AUD3_RXD 0x080 0x394 0x000 0x4 0x0
+#define MX6QDL_PAD_CSI0_DAT7__GPIO5_IO25 0x080 0x394 0x000 0x5 0x0
+#define MX6QDL_PAD_CSI0_DAT7__ARM_TRACE04 0x080 0x394 0x000 0x7 0x0
+#define MX6QDL_PAD_CSI0_DAT8__IPU1_CSI0_DATA08 0x084 0x398 0x000 0x0 0x0
+#define MX6QDL_PAD_CSI0_DAT8__EIM_DATA06 0x084 0x398 0x000 0x1 0x0
+#define MX6QDL_PAD_CSI0_DAT8__ECSPI2_SCLK 0x084 0x398 0x7f4 0x2 0x0
+#define MX6QDL_PAD_CSI0_DAT8__KEY_COL7 0x084 0x398 0x8c8 0x3 0x0
+#define MX6QDL_PAD_CSI0_DAT8__I2C1_SDA 0x084 0x398 0x86c 0x4 0x0
+#define MX6QDL_PAD_CSI0_DAT8__GPIO5_IO26 0x084 0x398 0x000 0x5 0x0
+#define MX6QDL_PAD_CSI0_DAT8__ARM_TRACE05 0x084 0x398 0x000 0x7 0x0
+#define MX6QDL_PAD_CSI0_DAT9__IPU1_CSI0_DATA09 0x088 0x39c 0x000 0x0 0x0
+#define MX6QDL_PAD_CSI0_DAT9__EIM_DATA07 0x088 0x39c 0x000 0x1 0x0
+#define MX6QDL_PAD_CSI0_DAT9__ECSPI2_MOSI 0x088 0x39c 0x7fc 0x2 0x0
+#define MX6QDL_PAD_CSI0_DAT9__KEY_ROW7 0x088 0x39c 0x8d4 0x3 0x0
+#define MX6QDL_PAD_CSI0_DAT9__I2C1_SCL 0x088 0x39c 0x868 0x4 0x0
+#define MX6QDL_PAD_CSI0_DAT9__GPIO5_IO27 0x088 0x39c 0x000 0x5 0x0
+#define MX6QDL_PAD_CSI0_DAT9__ARM_TRACE06 0x088 0x39c 0x000 0x7 0x0
+#define MX6QDL_PAD_CSI0_DATA_EN__IPU1_CSI0_DATA_EN 0x08c 0x3a0 0x000 0x0 0x0
+#define MX6QDL_PAD_CSI0_DATA_EN__EIM_DATA00 0x08c 0x3a0 0x000 0x1 0x0
+#define MX6QDL_PAD_CSI0_DATA_EN__GPIO5_IO20 0x08c 0x3a0 0x000 0x5 0x0
+#define MX6QDL_PAD_CSI0_DATA_EN__ARM_TRACE_CLK 0x08c 0x3a0 0x000 0x7 0x0
+#define MX6QDL_PAD_CSI0_MCLK__IPU1_CSI0_HSYNC 0x090 0x3a4 0x000 0x0 0x0
+#define MX6QDL_PAD_CSI0_MCLK__CCM_CLKO1 0x090 0x3a4 0x000 0x3 0x0
+#define MX6QDL_PAD_CSI0_MCLK__GPIO5_IO19 0x090 0x3a4 0x000 0x5 0x0
+#define MX6QDL_PAD_CSI0_MCLK__ARM_TRACE_CTL 0x090 0x3a4 0x000 0x7 0x0
+#define MX6QDL_PAD_CSI0_PIXCLK__IPU1_CSI0_PIXCLK 0x094 0x3a8 0x000 0x0 0x0
+#define MX6QDL_PAD_CSI0_PIXCLK__GPIO5_IO18 0x094 0x3a8 0x000 0x5 0x0
+#define MX6QDL_PAD_CSI0_PIXCLK__ARM_EVENTO 0x094 0x3a8 0x000 0x7 0x0
+#define MX6QDL_PAD_CSI0_VSYNC__IPU1_CSI0_VSYNC 0x098 0x3ac 0x000 0x0 0x0
+#define MX6QDL_PAD_CSI0_VSYNC__EIM_DATA01 0x098 0x3ac 0x000 0x1 0x0
+#define MX6QDL_PAD_CSI0_VSYNC__GPIO5_IO21 0x098 0x3ac 0x000 0x5 0x0
+#define MX6QDL_PAD_CSI0_VSYNC__ARM_TRACE00 0x098 0x3ac 0x000 0x7 0x0
+#define MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x09c 0x3b0 0x000 0x0 0x0
+#define MX6QDL_PAD_DI0_DISP_CLK__LCD_CLK 0x09c 0x3b0 0x000 0x1 0x0
+#define MX6QDL_PAD_DI0_DISP_CLK__GPIO4_IO16 0x09c 0x3b0 0x000 0x5 0x0
+#define MX6QDL_PAD_DI0_DISP_CLK__LCD_WR_RWN 0x09c 0x3b0 0x000 0x8 0x0
+#define MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15 0x0a0 0x3b4 0x000 0x0 0x0
+#define MX6QDL_PAD_DI0_PIN15__LCD_ENABLE 0x0a0 0x3b4 0x000 0x1 0x0
+#define MX6QDL_PAD_DI0_PIN15__AUD6_TXC 0x0a0 0x3b4 0x000 0x2 0x0
+#define MX6QDL_PAD_DI0_PIN15__GPIO4_IO17 0x0a0 0x3b4 0x000 0x5 0x0
+#define MX6QDL_PAD_DI0_PIN15__LCD_RD_E 0x0a0 0x3b4 0x000 0x8 0x0
+#define MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02 0x0a4 0x3b8 0x000 0x0 0x0
+#define MX6QDL_PAD_DI0_PIN2__LCD_HSYNC 0x0a4 0x3b8 0x8d8 0x1 0x0
+#define MX6QDL_PAD_DI0_PIN2__AUD6_TXD 0x0a4 0x3b8 0x000 0x2 0x0
+#define MX6QDL_PAD_DI0_PIN2__GPIO4_IO18 0x0a4 0x3b8 0x000 0x5 0x0
+#define MX6QDL_PAD_DI0_PIN2__LCD_RS 0x0a4 0x3b8 0x000 0x8 0x0
+#define MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03 0x0a8 0x3bc 0x000 0x0 0x0
+#define MX6QDL_PAD_DI0_PIN3__LCD_VSYNC 0x0a8 0x3bc 0x000 0x1 0x0
+#define MX6QDL_PAD_DI0_PIN3__AUD6_TXFS 0x0a8 0x3bc 0x000 0x2 0x0
+#define MX6QDL_PAD_DI0_PIN3__GPIO4_IO19 0x0a8 0x3bc 0x000 0x5 0x0
+#define MX6QDL_PAD_DI0_PIN3__LCD_CS 0x0a8 0x3bc 0x000 0x8 0x0
+#define MX6QDL_PAD_DI0_PIN4__IPU1_DI0_PIN04 0x0ac 0x3c0 0x000 0x0 0x0
+#define MX6QDL_PAD_DI0_PIN4__LCD_BUSY 0x0ac 0x3c0 0x8d8 0x1 0x1
+#define MX6QDL_PAD_DI0_PIN4__AUD6_RXD 0x0ac 0x3c0 0x000 0x2 0x0
+#define MX6QDL_PAD_DI0_PIN4__SD1_WP 0x0ac 0x3c0 0x92c 0x3 0x0
+#define MX6QDL_PAD_DI0_PIN4__GPIO4_IO20 0x0ac 0x3c0 0x000 0x5 0x0
+#define MX6QDL_PAD_DI0_PIN4__LCD_RESET 0x0ac 0x3c0 0x000 0x8 0x0
+#define MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00 0x0b0 0x3c4 0x000 0x0 0x0
+#define MX6QDL_PAD_DISP0_DAT0__LCD_DATA00 0x0b0 0x3c4 0x000 0x1 0x0
+#define MX6QDL_PAD_DISP0_DAT0__ECSPI3_SCLK 0x0b0 0x3c4 0x000 0x2 0x0
+#define MX6QDL_PAD_DISP0_DAT0__GPIO4_IO21 0x0b0 0x3c4 0x000 0x5 0x0
+#define MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01 0x0b4 0x3c8 0x000 0x0 0x0
+#define MX6QDL_PAD_DISP0_DAT1__LCD_DATA01 0x0b4 0x3c8 0x000 0x1 0x0
+#define MX6QDL_PAD_DISP0_DAT1__ECSPI3_MOSI 0x0b4 0x3c8 0x000 0x2 0x0
+#define MX6QDL_PAD_DISP0_DAT1__GPIO4_IO22 0x0b4 0x3c8 0x000 0x5 0x0
+#define MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10 0x0b8 0x3cc 0x000 0x0 0x0
+#define MX6QDL_PAD_DISP0_DAT10__LCD_DATA10 0x0b8 0x3cc 0x000 0x1 0x0
+#define MX6QDL_PAD_DISP0_DAT10__GPIO4_IO31 0x0b8 0x3cc 0x000 0x5 0x0
+#define MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11 0x0bc 0x3d0 0x000 0x0 0x0
+#define MX6QDL_PAD_DISP0_DAT11__LCD_DATA11 0x0bc 0x3d0 0x000 0x1 0x0
+#define MX6QDL_PAD_DISP0_DAT11__GPIO5_IO05 0x0bc 0x3d0 0x000 0x5 0x0
+#define MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12 0x0c0 0x3d4 0x000 0x0 0x0
+#define MX6QDL_PAD_DISP0_DAT12__LCD_DATA12 0x0c0 0x3d4 0x000 0x1 0x0
+#define MX6QDL_PAD_DISP0_DAT12__GPIO5_IO06 0x0c0 0x3d4 0x000 0x5 0x0
+#define MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13 0x0c4 0x3d8 0x000 0x0 0x0
+#define MX6QDL_PAD_DISP0_DAT13__LCD_DATA13 0x0c4 0x3d8 0x000 0x1 0x0
+#define MX6QDL_PAD_DISP0_DAT13__AUD5_RXFS 0x0c4 0x3d8 0x7bc 0x3 0x0
+#define MX6QDL_PAD_DISP0_DAT13__GPIO5_IO07 0x0c4 0x3d8 0x000 0x5 0x0
+#define MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14 0x0c8 0x3dc 0x000 0x0 0x0
+#define MX6QDL_PAD_DISP0_DAT14__LCD_DATA14 0x0c8 0x3dc 0x000 0x1 0x0
+#define MX6QDL_PAD_DISP0_DAT14__AUD5_RXC 0x0c8 0x3dc 0x7b8 0x3 0x0
+#define MX6QDL_PAD_DISP0_DAT14__GPIO5_IO08 0x0c8 0x3dc 0x000 0x5 0x0
+#define MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15 0x0cc 0x3e0 0x000 0x0 0x0
+#define MX6QDL_PAD_DISP0_DAT15__LCD_DATA15 0x0cc 0x3e0 0x000 0x1 0x0
+#define MX6QDL_PAD_DISP0_DAT15__ECSPI1_SS1 0x0cc 0x3e0 0x7e8 0x2 0x0
+#define MX6QDL_PAD_DISP0_DAT15__ECSPI2_SS1 0x0cc 0x3e0 0x804 0x3 0x0
+#define MX6QDL_PAD_DISP0_DAT15__GPIO5_IO09 0x0cc 0x3e0 0x000 0x5 0x0
+#define MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16 0x0d0 0x3e4 0x000 0x0 0x0
+#define MX6QDL_PAD_DISP0_DAT16__LCD_DATA16 0x0d0 0x3e4 0x000 0x1 0x0
+#define MX6QDL_PAD_DISP0_DAT16__ECSPI2_MOSI 0x0d0 0x3e4 0x7fc 0x2 0x1
+#define MX6QDL_PAD_DISP0_DAT16__AUD5_TXC 0x0d0 0x3e4 0x7c0 0x3 0x0
+#define MX6QDL_PAD_DISP0_DAT16__SDMA_EXT_EVENT0 0x0d0 0x3e4 0x8e8 0x4 0x0
+#define MX6QDL_PAD_DISP0_DAT16__GPIO5_IO10 0x0d0 0x3e4 0x000 0x5 0x0
+#define MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17 0x0d4 0x3e8 0x000 0x0 0x0
+#define MX6QDL_PAD_DISP0_DAT17__LCD_DATA17 0x0d4 0x3e8 0x000 0x1 0x0
+#define MX6QDL_PAD_DISP0_DAT17__ECSPI2_MISO 0x0d4 0x3e8 0x7f8 0x2 0x1
+#define MX6QDL_PAD_DISP0_DAT17__AUD5_TXD 0x0d4 0x3e8 0x7b4 0x3 0x0
+#define MX6QDL_PAD_DISP0_DAT17__SDMA_EXT_EVENT1 0x0d4 0x3e8 0x8ec 0x4 0x0
+#define MX6QDL_PAD_DISP0_DAT17__GPIO5_IO11 0x0d4 0x3e8 0x000 0x5 0x0
+#define MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18 0x0d8 0x3ec 0x000 0x0 0x0
+#define MX6QDL_PAD_DISP0_DAT18__LCD_DATA18 0x0d8 0x3ec 0x000 0x1 0x0
+#define MX6QDL_PAD_DISP0_DAT18__ECSPI2_SS0 0x0d8 0x3ec 0x800 0x2 0x1
+#define MX6QDL_PAD_DISP0_DAT18__AUD5_TXFS 0x0d8 0x3ec 0x7c4 0x3 0x0
+#define MX6QDL_PAD_DISP0_DAT18__AUD4_RXFS 0x0d8 0x3ec 0x7a4 0x4 0x0
+#define MX6QDL_PAD_DISP0_DAT18__GPIO5_IO12 0x0d8 0x3ec 0x000 0x5 0x0
+#define MX6QDL_PAD_DISP0_DAT18__EIM_CS2_B 0x0d8 0x3ec 0x000 0x7 0x0
+#define MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19 0x0dc 0x3f0 0x000 0x0 0x0
+#define MX6QDL_PAD_DISP0_DAT19__LCD_DATA19 0x0dc 0x3f0 0x000 0x1 0x0
+#define MX6QDL_PAD_DISP0_DAT19__ECSPI2_SCLK 0x0dc 0x3f0 0x7f4 0x2 0x1
+#define MX6QDL_PAD_DISP0_DAT19__AUD5_RXD 0x0dc 0x3f0 0x7b0 0x3 0x0
+#define MX6QDL_PAD_DISP0_DAT19__AUD4_RXC 0x0dc 0x3f0 0x7a0 0x4 0x0
+#define MX6QDL_PAD_DISP0_DAT19__GPIO5_IO13 0x0dc 0x3f0 0x000 0x5 0x0
+#define MX6QDL_PAD_DISP0_DAT19__EIM_CS3_B 0x0dc 0x3f0 0x000 0x7 0x0
+#define MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02 0x0e0 0x3f4 0x000 0x0 0x0
+#define MX6QDL_PAD_DISP0_DAT2__LCD_DATA02 0x0e0 0x3f4 0x000 0x1 0x0
+#define MX6QDL_PAD_DISP0_DAT2__ECSPI3_MISO 0x0e0 0x3f4 0x000 0x2 0x0
+#define MX6QDL_PAD_DISP0_DAT2__GPIO4_IO23 0x0e0 0x3f4 0x000 0x5 0x0
+#define MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20 0x0e4 0x3f8 0x000 0x0 0x0
+#define MX6QDL_PAD_DISP0_DAT20__LCD_DATA20 0x0e4 0x3f8 0x000 0x1 0x0
+#define MX6QDL_PAD_DISP0_DAT20__ECSPI1_SCLK 0x0e4 0x3f8 0x7d8 0x2 0x1
+#define MX6QDL_PAD_DISP0_DAT20__AUD4_TXC 0x0e4 0x3f8 0x7a8 0x3 0x0
+#define MX6QDL_PAD_DISP0_DAT20__GPIO5_IO14 0x0e4 0x3f8 0x000 0x5 0x0
+#define MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21 0x0e8 0x3fc 0x000 0x0 0x0
+#define MX6QDL_PAD_DISP0_DAT21__LCD_DATA21 0x0e8 0x3fc 0x000 0x1 0x0
+#define MX6QDL_PAD_DISP0_DAT21__ECSPI1_MOSI 0x0e8 0x3fc 0x7e0 0x2 0x1
+#define MX6QDL_PAD_DISP0_DAT21__AUD4_TXD 0x0e8 0x3fc 0x79c 0x3 0x0
+#define MX6QDL_PAD_DISP0_DAT21__GPIO5_IO15 0x0e8 0x3fc 0x000 0x5 0x0
+#define MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22 0x0ec 0x400 0x000 0x0 0x0
+#define MX6QDL_PAD_DISP0_DAT22__LCD_DATA22 0x0ec 0x400 0x000 0x1 0x0
+#define MX6QDL_PAD_DISP0_DAT22__ECSPI1_MISO 0x0ec 0x400 0x7dc 0x2 0x1
+#define MX6QDL_PAD_DISP0_DAT22__AUD4_TXFS 0x0ec 0x400 0x7ac 0x3 0x0
+#define MX6QDL_PAD_DISP0_DAT22__GPIO5_IO16 0x0ec 0x400 0x000 0x5 0x0
+#define MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23 0x0f0 0x404 0x000 0x0 0x0
+#define MX6QDL_PAD_DISP0_DAT23__LCD_DATA23 0x0f0 0x404 0x000 0x1 0x0
+#define MX6QDL_PAD_DISP0_DAT23__ECSPI1_SS0 0x0f0 0x404 0x7e4 0x2 0x1
+#define MX6QDL_PAD_DISP0_DAT23__AUD4_RXD 0x0f0 0x404 0x798 0x3 0x0
+#define MX6QDL_PAD_DISP0_DAT23__GPIO5_IO17 0x0f0 0x404 0x000 0x5 0x0
+#define MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03 0x0f4 0x408 0x000 0x0 0x0
+#define MX6QDL_PAD_DISP0_DAT3__LCD_DATA03 0x0f4 0x408 0x000 0x1 0x0
+#define MX6QDL_PAD_DISP0_DAT3__ECSPI3_SS0 0x0f4 0x408 0x000 0x2 0x0
+#define MX6QDL_PAD_DISP0_DAT3__GPIO4_IO24 0x0f4 0x408 0x000 0x5 0x0
+#define MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04 0x0f8 0x40c 0x000 0x0 0x0
+#define MX6QDL_PAD_DISP0_DAT4__LCD_DATA04 0x0f8 0x40c 0x000 0x1 0x0
+#define MX6QDL_PAD_DISP0_DAT4__ECSPI3_SS1 0x0f8 0x40c 0x000 0x2 0x0
+#define MX6QDL_PAD_DISP0_DAT4__GPIO4_IO25 0x0f8 0x40c 0x000 0x5 0x0
+#define MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05 0x0fc 0x410 0x000 0x0 0x0
+#define MX6QDL_PAD_DISP0_DAT5__LCD_DATA05 0x0fc 0x410 0x000 0x1 0x0
+#define MX6QDL_PAD_DISP0_DAT5__ECSPI3_SS2 0x0fc 0x410 0x000 0x2 0x0
+#define MX6QDL_PAD_DISP0_DAT5__AUD6_RXFS 0x0fc 0x410 0x000 0x3 0x0
+#define MX6QDL_PAD_DISP0_DAT5__GPIO4_IO26 0x0fc 0x410 0x000 0x5 0x0
+#define MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06 0x100 0x414 0x000 0x0 0x0
+#define MX6QDL_PAD_DISP0_DAT6__LCD_DATA06 0x100 0x414 0x000 0x1 0x0
+#define MX6QDL_PAD_DISP0_DAT6__ECSPI3_SS3 0x100 0x414 0x000 0x2 0x0
+#define MX6QDL_PAD_DISP0_DAT6__AUD6_RXC 0x100 0x414 0x000 0x3 0x0
+#define MX6QDL_PAD_DISP0_DAT6__GPIO4_IO27 0x100 0x414 0x000 0x5 0x0
+#define MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07 0x104 0x418 0x000 0x0 0x0
+#define MX6QDL_PAD_DISP0_DAT7__LCD_DATA07 0x104 0x418 0x000 0x1 0x0
+#define MX6QDL_PAD_DISP0_DAT7__ECSPI3_RDY 0x104 0x418 0x000 0x2 0x0
+#define MX6QDL_PAD_DISP0_DAT7__GPIO4_IO28 0x104 0x418 0x000 0x5 0x0
+#define MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08 0x108 0x41c 0x000 0x0 0x0
+#define MX6QDL_PAD_DISP0_DAT8__LCD_DATA08 0x108 0x41c 0x000 0x1 0x0
+#define MX6QDL_PAD_DISP0_DAT8__PWM1_OUT 0x108 0x41c 0x000 0x2 0x0
+#define MX6QDL_PAD_DISP0_DAT8__WDOG1_B 0x108 0x41c 0x000 0x3 0x0
+#define MX6QDL_PAD_DISP0_DAT8__GPIO4_IO29 0x108 0x41c 0x000 0x5 0x0
+#define MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09 0x10c 0x420 0x000 0x0 0x0
+#define MX6QDL_PAD_DISP0_DAT9__LCD_DATA09 0x10c 0x420 0x000 0x1 0x0
+#define MX6QDL_PAD_DISP0_DAT9__PWM2_OUT 0x10c 0x420 0x000 0x2 0x0
+#define MX6QDL_PAD_DISP0_DAT9__WDOG2_B 0x10c 0x420 0x000 0x3 0x0
+#define MX6QDL_PAD_DISP0_DAT9__GPIO4_IO30 0x10c 0x420 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_A16__EIM_ADDR16 0x110 0x4e0 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_A16__IPU1_DI1_DISP_CLK 0x110 0x4e0 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_A16__IPU1_CSI1_PIXCLK 0x110 0x4e0 0x8b8 0x2 0x0
+#define MX6QDL_PAD_EIM_A16__GPIO2_IO22 0x110 0x4e0 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_A16__SRC_BOOT_CFG16 0x110 0x4e0 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_A16__EPDC_DATA00 0x110 0x4e0 0x000 0x8 0x0
+#define MX6QDL_PAD_EIM_A17__EIM_ADDR17 0x114 0x4e4 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_A17__IPU1_DISP1_DATA12 0x114 0x4e4 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_A17__IPU1_CSI1_DATA12 0x114 0x4e4 0x890 0x2 0x0
+#define MX6QDL_PAD_EIM_A17__GPIO2_IO21 0x114 0x4e4 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_A17__SRC_BOOT_CFG17 0x114 0x4e4 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_A17__EPDC_PWR_STAT 0x114 0x4e4 0x000 0x8 0x0
+#define MX6QDL_PAD_EIM_A18__EIM_ADDR18 0x118 0x4e8 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_A18__IPU1_DISP1_DATA13 0x118 0x4e8 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_A18__IPU1_CSI1_DATA13 0x118 0x4e8 0x894 0x2 0x0
+#define MX6QDL_PAD_EIM_A18__GPIO2_IO20 0x118 0x4e8 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_A18__SRC_BOOT_CFG18 0x118 0x4e8 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_A18__EPDC_PWR_CTRL0 0x118 0x4e8 0x000 0x8 0x0
+#define MX6QDL_PAD_EIM_A19__EIM_ADDR19 0x11c 0x4ec 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_A19__IPU1_DISP1_DATA14 0x11c 0x4ec 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_A19__IPU1_CSI1_DATA14 0x11c 0x4ec 0x898 0x2 0x0
+#define MX6QDL_PAD_EIM_A19__GPIO2_IO19 0x11c 0x4ec 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_A19__SRC_BOOT_CFG19 0x11c 0x4ec 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_A19__EPDC_PWR_CTRL1 0x11c 0x4ec 0x000 0x8 0x0
+#define MX6QDL_PAD_EIM_A20__EIM_ADDR20 0x120 0x4f0 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_A20__IPU1_DISP1_DATA15 0x120 0x4f0 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_A20__IPU1_CSI1_DATA15 0x120 0x4f0 0x89c 0x2 0x0
+#define MX6QDL_PAD_EIM_A20__GPIO2_IO18 0x120 0x4f0 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_A20__SRC_BOOT_CFG20 0x120 0x4f0 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_A20__EPDC_PWR_CTRL2 0x120 0x4f0 0x000 0x8 0x0
+#define MX6QDL_PAD_EIM_A21__EIM_ADDR21 0x124 0x4f4 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_A21__IPU1_DISP1_DATA16 0x124 0x4f4 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_A21__IPU1_CSI1_DATA16 0x124 0x4f4 0x8a0 0x2 0x0
+#define MX6QDL_PAD_EIM_A21__GPIO2_IO17 0x124 0x4f4 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_A21__SRC_BOOT_CFG21 0x124 0x4f4 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_A21__EPDC_GDCLK 0x124 0x4f4 0x000 0x8 0x0
+#define MX6QDL_PAD_EIM_A22__EIM_ADDR22 0x128 0x4f8 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_A22__IPU1_DISP1_DATA17 0x128 0x4f8 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_A22__IPU1_CSI1_DATA17 0x128 0x4f8 0x8a4 0x2 0x0
+#define MX6QDL_PAD_EIM_A22__GPIO2_IO16 0x128 0x4f8 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_A22__SRC_BOOT_CFG22 0x128 0x4f8 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_A22__EPDC_GDSP 0x128 0x4f8 0x000 0x8 0x0
+#define MX6QDL_PAD_EIM_A23__EIM_ADDR23 0x12c 0x4fc 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_A23__IPU1_DISP1_DATA18 0x12c 0x4fc 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_A23__IPU1_CSI1_DATA18 0x12c 0x4fc 0x8a8 0x2 0x0
+#define MX6QDL_PAD_EIM_A23__IPU1_SISG3 0x12c 0x4fc 0x000 0x4 0x0
+#define MX6QDL_PAD_EIM_A23__GPIO6_IO06 0x12c 0x4fc 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_A23__SRC_BOOT_CFG23 0x12c 0x4fc 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_A23__EPDC_GDOE 0x12c 0x4fc 0x000 0x8 0x0
+#define MX6QDL_PAD_EIM_A24__EIM_ADDR24 0x130 0x500 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_A24__IPU1_DISP1_DATA19 0x130 0x500 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_A24__IPU1_CSI1_DATA19 0x130 0x500 0x8ac 0x2 0x0
+#define MX6QDL_PAD_EIM_A24__IPU1_SISG2 0x130 0x500 0x000 0x4 0x0
+#define MX6QDL_PAD_EIM_A24__GPIO5_IO04 0x130 0x500 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_A24__SRC_BOOT_CFG24 0x130 0x500 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_A24__EPDC_GDRL 0x130 0x500 0x000 0x8 0x0
+#define MX6QDL_PAD_EIM_A25__EIM_ADDR25 0x134 0x504 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_A25__ECSPI4_SS1 0x134 0x504 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_A25__ECSPI2_RDY 0x134 0x504 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_A25__IPU1_DI1_PIN12 0x134 0x504 0x000 0x3 0x0
+#define MX6QDL_PAD_EIM_A25__IPU1_DI0_D1_CS 0x134 0x504 0x000 0x4 0x0
+#define MX6QDL_PAD_EIM_A25__GPIO5_IO02 0x134 0x504 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_A25__HDMI_TX_CEC_LINE 0x134 0x504 0x85c 0x6 0x0
+#define MX6QDL_PAD_EIM_A25__EPDC_DATA15 0x134 0x504 0x000 0x8 0x0
+#define MX6QDL_PAD_EIM_A25__EIM_ACLK_FREERUN 0x134 0x504 0x000 0x9 0x0
+#define MX6QDL_PAD_EIM_BCLK__EIM_BCLK 0x138 0x508 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_BCLK__IPU1_DI1_PIN16 0x138 0x508 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_BCLK__GPIO6_IO31 0x138 0x508 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_BCLK__EPDC_SDCE9 0x138 0x508 0x000 0x8 0x0
+#define MX6QDL_PAD_EIM_CS0__EIM_CS0_B 0x13c 0x50c 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_CS0__IPU1_DI1_PIN05 0x13c 0x50c 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_CS0__ECSPI2_SCLK 0x13c 0x50c 0x7f4 0x2 0x2
+#define MX6QDL_PAD_EIM_CS0__GPIO2_IO23 0x13c 0x50c 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_CS0__EPDC_DATA06 0x13c 0x50c 0x000 0x8 0x0
+#define MX6QDL_PAD_EIM_CS1__EIM_CS1_B 0x140 0x510 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_CS1__IPU1_DI1_PIN06 0x140 0x510 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_CS1__ECSPI2_MOSI 0x140 0x510 0x7fc 0x2 0x2
+#define MX6QDL_PAD_EIM_CS1__GPIO2_IO24 0x140 0x510 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_CS1__EPDC_DATA08 0x140 0x510 0x000 0x8 0x0
+#define MX6QDL_PAD_EIM_D16__EIM_DATA16 0x144 0x514 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_D16__ECSPI1_SCLK 0x144 0x514 0x7d8 0x1 0x2
+#define MX6QDL_PAD_EIM_D16__IPU1_DI0_PIN05 0x144 0x514 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_D16__IPU1_CSI1_DATA18 0x144 0x514 0x8a8 0x3 0x1
+#define MX6QDL_PAD_EIM_D16__HDMI_TX_DDC_SDA 0x144 0x514 0x864 0x4 0x0
+#define MX6QDL_PAD_EIM_D16__GPIO3_IO16 0x144 0x514 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_D16__I2C2_SDA 0x144 0x514 0x874 0x6 0x0
+#define MX6QDL_PAD_EIM_D16__EPDC_DATA10 0x144 0x514 0x000 0x8 0x0
+#define MX6QDL_PAD_EIM_D17__EIM_DATA17 0x148 0x518 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_D17__ECSPI1_MISO 0x148 0x518 0x7dc 0x1 0x2
+#define MX6QDL_PAD_EIM_D17__IPU1_DI0_PIN06 0x148 0x518 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_D17__IPU1_CSI1_PIXCLK 0x148 0x518 0x8b8 0x3 0x1
+#define MX6QDL_PAD_EIM_D17__DCIC1_OUT 0x148 0x518 0x000 0x4 0x0
+#define MX6QDL_PAD_EIM_D17__GPIO3_IO17 0x148 0x518 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_D17__I2C3_SCL 0x148 0x518 0x878 0x6 0x0
+#define MX6QDL_PAD_EIM_D17__EPDC_VCOM0 0x148 0x518 0x000 0x8 0x0
+#define MX6QDL_PAD_EIM_D18__EIM_DATA18 0x14c 0x51c 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_D18__ECSPI1_MOSI 0x14c 0x51c 0x7e0 0x1 0x2
+#define MX6QDL_PAD_EIM_D18__IPU1_DI0_PIN07 0x14c 0x51c 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_D18__IPU1_CSI1_DATA17 0x14c 0x51c 0x8a4 0x3 0x1
+#define MX6QDL_PAD_EIM_D18__IPU1_DI1_D0_CS 0x14c 0x51c 0x000 0x4 0x0
+#define MX6QDL_PAD_EIM_D18__GPIO3_IO18 0x14c 0x51c 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_D18__I2C3_SDA 0x14c 0x51c 0x87c 0x6 0x0
+#define MX6QDL_PAD_EIM_D18__EPDC_VCOM1 0x14c 0x51c 0x000 0x8 0x0
+#define MX6QDL_PAD_EIM_D19__EIM_DATA19 0x150 0x520 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_D19__ECSPI1_SS1 0x150 0x520 0x7e8 0x1 0x1
+#define MX6QDL_PAD_EIM_D19__IPU1_DI0_PIN08 0x150 0x520 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_D19__IPU1_CSI1_DATA16 0x150 0x520 0x8a0 0x3 0x1
+#define MX6QDL_PAD_EIM_D19__UART1_CTS_B 0x150 0x520 0x000 0x4 0x0
+#define MX6QDL_PAD_EIM_D19__UART1_RTS_B 0x150 0x520 0x8f8 0x4 0x0
+#define MX6QDL_PAD_EIM_D19__GPIO3_IO19 0x150 0x520 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_D19__EPIT1_OUT 0x150 0x520 0x000 0x6 0x0
+#define MX6QDL_PAD_EIM_D19__EPDC_DATA12 0x150 0x520 0x000 0x8 0x0
+#define MX6QDL_PAD_EIM_D20__EIM_DATA20 0x154 0x524 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_D20__ECSPI4_SS0 0x154 0x524 0x808 0x1 0x0
+#define MX6QDL_PAD_EIM_D20__IPU1_DI0_PIN16 0x154 0x524 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_D20__IPU1_CSI1_DATA15 0x154 0x524 0x89c 0x3 0x1
+#define MX6QDL_PAD_EIM_D20__UART1_RTS_B 0x154 0x524 0x8f8 0x4 0x1
+#define MX6QDL_PAD_EIM_D20__UART1_CTS_B 0x154 0x524 0x000 0x4 0x0
+#define MX6QDL_PAD_EIM_D20__GPIO3_IO20 0x154 0x524 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_D20__EPIT2_OUT 0x154 0x524 0x000 0x6 0x0
+#define MX6QDL_PAD_EIM_D21__EIM_DATA21 0x158 0x528 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_D21__ECSPI4_SCLK 0x158 0x528 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_D21__IPU1_DI0_PIN17 0x158 0x528 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_D21__IPU1_CSI1_DATA11 0x158 0x528 0x88c 0x3 0x0
+#define MX6QDL_PAD_EIM_D21__USB_OTG_OC 0x158 0x528 0x920 0x4 0x0
+#define MX6QDL_PAD_EIM_D21__GPIO3_IO21 0x158 0x528 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_D21__I2C1_SCL 0x158 0x528 0x868 0x6 0x1
+#define MX6QDL_PAD_EIM_D21__SPDIF_IN 0x158 0x528 0x8f0 0x7 0x0
+#define MX6QDL_PAD_EIM_D22__EIM_DATA22 0x15c 0x52c 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_D22__ECSPI4_MISO 0x15c 0x52c 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_D22__IPU1_DI0_PIN01 0x15c 0x52c 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_D22__IPU1_CSI1_DATA10 0x15c 0x52c 0x888 0x3 0x0
+#define MX6QDL_PAD_EIM_D22__USB_OTG_PWR 0x15c 0x52c 0x000 0x4 0x0
+#define MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x15c 0x52c 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_D22__SPDIF_OUT 0x15c 0x52c 0x000 0x6 0x0
+#define MX6QDL_PAD_EIM_D22__EPDC_SDCE6 0x15c 0x52c 0x000 0x8 0x0
+#define MX6QDL_PAD_EIM_D23__EIM_DATA23 0x160 0x530 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_D23__IPU1_DI0_D0_CS 0x160 0x530 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_D23__UART3_CTS_B 0x160 0x530 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_D23__UART3_RTS_B 0x160 0x530 0x908 0x2 0x0
+#define MX6QDL_PAD_EIM_D23__UART1_DCD_B 0x160 0x530 0x000 0x3 0x0
+#define MX6QDL_PAD_EIM_D23__IPU1_CSI1_DATA_EN 0x160 0x530 0x8b0 0x4 0x0
+#define MX6QDL_PAD_EIM_D23__GPIO3_IO23 0x160 0x530 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_D23__IPU1_DI1_PIN02 0x160 0x530 0x000 0x6 0x0
+#define MX6QDL_PAD_EIM_D23__IPU1_DI1_PIN14 0x160 0x530 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_D23__EPDC_DATA11 0x160 0x530 0x000 0x8 0x0
+#define MX6QDL_PAD_EIM_D24__EIM_DATA24 0x164 0x534 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_D24__ECSPI4_SS2 0x164 0x534 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x164 0x534 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_D24__UART3_RX_DATA 0x164 0x534 0x90c 0x2 0x0
+#define MX6QDL_PAD_EIM_D24__ECSPI1_SS2 0x164 0x534 0x7ec 0x3 0x0
+#define MX6QDL_PAD_EIM_D24__ECSPI2_SS2 0x164 0x534 0x000 0x4 0x0
+#define MX6QDL_PAD_EIM_D24__GPIO3_IO24 0x164 0x534 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_D24__AUD5_RXFS 0x164 0x534 0x7bc 0x6 0x1
+#define MX6QDL_PAD_EIM_D24__UART1_DTR_B 0x164 0x534 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_D24__EPDC_SDCE7 0x164 0x534 0x000 0x8 0x0
+#define MX6QDL_PAD_EIM_D25__EIM_DATA25 0x168 0x538 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_D25__ECSPI4_SS3 0x168 0x538 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x168 0x538 0x90c 0x2 0x1
+#define MX6QDL_PAD_EIM_D25__UART3_TX_DATA 0x168 0x538 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_D25__ECSPI1_SS3 0x168 0x538 0x7f0 0x3 0x0
+#define MX6QDL_PAD_EIM_D25__ECSPI2_SS3 0x168 0x538 0x000 0x4 0x0
+#define MX6QDL_PAD_EIM_D25__GPIO3_IO25 0x168 0x538 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_D25__AUD5_RXC 0x168 0x538 0x7b8 0x6 0x1
+#define MX6QDL_PAD_EIM_D25__UART1_DSR_B 0x168 0x538 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_D25__EPDC_SDCE8 0x168 0x538 0x000 0x8 0x0
+#define MX6QDL_PAD_EIM_D26__EIM_DATA26 0x16c 0x53c 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_D26__IPU1_DI1_PIN11 0x16c 0x53c 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_D26__IPU1_CSI0_DATA01 0x16c 0x53c 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_D26__IPU1_CSI1_DATA14 0x16c 0x53c 0x898 0x3 0x1
+#define MX6QDL_PAD_EIM_D26__UART2_TX_DATA 0x16c 0x53c 0x000 0x4 0x0
+#define MX6QDL_PAD_EIM_D26__UART2_RX_DATA 0x16c 0x53c 0x904 0x4 0x0
+#define MX6QDL_PAD_EIM_D26__GPIO3_IO26 0x16c 0x53c 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_D26__IPU1_SISG2 0x16c 0x53c 0x000 0x6 0x0
+#define MX6QDL_PAD_EIM_D26__IPU1_DISP1_DATA22 0x16c 0x53c 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_D26__EPDC_SDOED 0x16c 0x53c 0x000 0x8 0x0
+#define MX6QDL_PAD_EIM_D27__EIM_DATA27 0x170 0x540 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_D27__IPU1_DI1_PIN13 0x170 0x540 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_D27__IPU1_CSI0_DATA00 0x170 0x540 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_D27__IPU1_CSI1_DATA13 0x170 0x540 0x894 0x3 0x1
+#define MX6QDL_PAD_EIM_D27__UART2_RX_DATA 0x170 0x540 0x904 0x4 0x1
+#define MX6QDL_PAD_EIM_D27__UART2_TX_DATA 0x170 0x540 0x000 0x4 0x0
+#define MX6QDL_PAD_EIM_D27__GPIO3_IO27 0x170 0x540 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_D27__IPU1_SISG3 0x170 0x540 0x000 0x6 0x0
+#define MX6QDL_PAD_EIM_D27__IPU1_DISP1_DATA23 0x170 0x540 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_D27__EPDC_SDOE 0x170 0x540 0x000 0x8 0x0
+#define MX6QDL_PAD_EIM_D28__EIM_DATA28 0x174 0x544 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_D28__I2C1_SDA 0x174 0x544 0x86c 0x1 0x1
+#define MX6QDL_PAD_EIM_D28__ECSPI4_MOSI 0x174 0x544 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_D28__IPU1_CSI1_DATA12 0x174 0x544 0x890 0x3 0x1
+#define MX6QDL_PAD_EIM_D28__UART2_CTS_B 0x174 0x544 0x000 0x4 0x0
+#define MX6QDL_PAD_EIM_D28__UART2_RTS_B 0x174 0x544 0x900 0x4 0x0
+#define MX6QDL_PAD_EIM_D28__UART2_DTE_CTS_B 0x174 0x544 0x900 0x4 0x0
+#define MX6QDL_PAD_EIM_D28__UART2_DTE_RTS_B 0x174 0x544 0x000 0x4 0x0
+#define MX6QDL_PAD_EIM_D28__GPIO3_IO28 0x174 0x544 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_D28__IPU1_EXT_TRIG 0x174 0x544 0x000 0x6 0x0
+#define MX6QDL_PAD_EIM_D28__IPU1_DI0_PIN13 0x174 0x544 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_D28__EPDC_PWR_CTRL3 0x174 0x544 0x000 0x8 0x0
+#define MX6QDL_PAD_EIM_D29__EIM_DATA29 0x178 0x548 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_D29__IPU1_DI1_PIN15 0x178 0x548 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_D29__ECSPI4_SS0 0x178 0x548 0x808 0x2 0x1
+#define MX6QDL_PAD_EIM_D29__UART2_RTS_B 0x178 0x548 0x900 0x4 0x1
+#define MX6QDL_PAD_EIM_D29__UART2_CTS_B 0x178 0x548 0x000 0x4 0x0
+#define MX6QDL_PAD_EIM_D29__UART2_DTE_RTS_B 0x178 0x548 0x000 0x4 0x0
+#define MX6QDL_PAD_EIM_D29__UART2_DTE_CTS_B 0x178 0x548 0x900 0x4 0x1
+#define MX6QDL_PAD_EIM_D29__GPIO3_IO29 0x178 0x548 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_D29__IPU1_CSI1_VSYNC 0x178 0x548 0x8bc 0x6 0x0
+#define MX6QDL_PAD_EIM_D29__IPU1_DI0_PIN14 0x178 0x548 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_D29__EPDC_PWR_WAKE 0x178 0x548 0x000 0x8 0x0
+#define MX6QDL_PAD_EIM_D30__EIM_DATA30 0x17c 0x54c 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_D30__IPU1_DISP1_DATA21 0x17c 0x54c 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_D30__IPU1_DI0_PIN11 0x17c 0x54c 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_D30__IPU1_CSI0_DATA03 0x17c 0x54c 0x000 0x3 0x0
+#define MX6QDL_PAD_EIM_D30__UART3_CTS_B 0x17c 0x54c 0x000 0x4 0x0
+#define MX6QDL_PAD_EIM_D30__UART3_RTS_B 0x17c 0x54c 0x908 0x4 0x1
+#define MX6QDL_PAD_EIM_D30__GPIO3_IO30 0x17c 0x54c 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_D30__USB_H1_OC 0x17c 0x54c 0x924 0x6 0x0
+#define MX6QDL_PAD_EIM_D30__EPDC_SDOEZ 0x17c 0x54c 0x000 0x8 0x0
+#define MX6QDL_PAD_EIM_D31__EIM_DATA31 0x180 0x550 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_D31__IPU1_DISP1_DATA20 0x180 0x550 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_D31__IPU1_DI0_PIN12 0x180 0x550 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_D31__IPU1_CSI0_DATA02 0x180 0x550 0x000 0x3 0x0
+#define MX6QDL_PAD_EIM_D31__UART3_RTS_B 0x180 0x550 0x908 0x4 0x2
+#define MX6QDL_PAD_EIM_D31__UART3_CTS_B 0x180 0x550 0x000 0x4 0x0
+#define MX6QDL_PAD_EIM_D31__GPIO3_IO31 0x180 0x550 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_D31__USB_H1_PWR 0x180 0x550 0x000 0x6 0x0
+#define MX6QDL_PAD_EIM_D31__EPDC_SDCLK_P 0x180 0x550 0x000 0x8 0x0
+#define MX6QDL_PAD_EIM_D31__EIM_ACLK_FREERUN 0x180 0x550 0x000 0x9 0x0
+#define MX6QDL_PAD_EIM_DA0__EIM_AD00 0x184 0x554 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_DA0__IPU1_DISP1_DATA09 0x184 0x554 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_DA0__IPU1_CSI1_DATA09 0x184 0x554 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_DA0__GPIO3_IO00 0x184 0x554 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_DA0__SRC_BOOT_CFG00 0x184 0x554 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_DA0__EPDC_SDCLK_N 0x184 0x554 0x000 0x8 0x0
+#define MX6QDL_PAD_EIM_DA1__EIM_AD01 0x188 0x558 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_DA1__IPU1_DISP1_DATA08 0x188 0x558 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_DA1__IPU1_CSI1_DATA08 0x188 0x558 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_DA1__GPIO3_IO01 0x188 0x558 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_DA1__SRC_BOOT_CFG01 0x188 0x558 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_DA1__EPDC_SDLE 0x188 0x558 0x000 0x8 0x0
+#define MX6QDL_PAD_EIM_DA10__EIM_AD10 0x18c 0x55c 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_DA10__IPU1_DI1_PIN15 0x18c 0x55c 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_DA10__IPU1_CSI1_DATA_EN 0x18c 0x55c 0x8b0 0x2 0x1
+#define MX6QDL_PAD_EIM_DA10__GPIO3_IO10 0x18c 0x55c 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_DA10__SRC_BOOT_CFG10 0x18c 0x55c 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_DA10__EPDC_DATA01 0x18c 0x55c 0x000 0x8 0x0
+#define MX6QDL_PAD_EIM_DA11__EIM_AD11 0x190 0x560 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_DA11__IPU1_DI1_PIN02 0x190 0x560 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_DA11__IPU1_CSI1_HSYNC 0x190 0x560 0x8b4 0x2 0x0
+#define MX6QDL_PAD_EIM_DA11__GPIO3_IO11 0x190 0x560 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_DA11__SRC_BOOT_CFG11 0x190 0x560 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_DA11__EPDC_DATA03 0x190 0x560 0x000 0x8 0x0
+#define MX6QDL_PAD_EIM_DA12__EIM_AD12 0x194 0x564 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_DA12__IPU1_DI1_PIN03 0x194 0x564 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_DA12__IPU1_CSI1_VSYNC 0x194 0x564 0x8bc 0x2 0x1
+#define MX6QDL_PAD_EIM_DA12__GPIO3_IO12 0x194 0x564 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_DA12__SRC_BOOT_CFG12 0x194 0x564 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_DA12__EPDC_DATA02 0x194 0x564 0x000 0x8 0x0
+#define MX6QDL_PAD_EIM_DA13__EIM_AD13 0x198 0x568 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_DA13__IPU1_DI1_D0_CS 0x198 0x568 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_DA13__GPIO3_IO13 0x198 0x568 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_DA13__SRC_BOOT_CFG13 0x198 0x568 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_DA13__EPDC_DATA13 0x198 0x568 0x000 0x8 0x0
+#define MX6QDL_PAD_EIM_DA14__EIM_AD14 0x19c 0x56c 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_DA14__IPU1_DI1_D1_CS 0x19c 0x56c 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_DA14__GPIO3_IO14 0x19c 0x56c 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_DA14__SRC_BOOT_CFG14 0x19c 0x56c 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_DA14__EPDC_DATA14 0x19c 0x56c 0x000 0x8 0x0
+#define MX6QDL_PAD_EIM_DA15__EIM_AD15 0x1a0 0x570 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_DA15__IPU1_DI1_PIN01 0x1a0 0x570 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_DA15__IPU1_DI1_PIN04 0x1a0 0x570 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_DA15__GPIO3_IO15 0x1a0 0x570 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_DA15__SRC_BOOT_CFG15 0x1a0 0x570 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_DA15__EPDC_DATA09 0x1a0 0x570 0x000 0x8 0x0
+#define MX6QDL_PAD_EIM_DA2__EIM_AD02 0x1a4 0x574 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_DA2__IPU1_DISP1_DATA07 0x1a4 0x574 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_DA2__IPU1_CSI1_DATA07 0x1a4 0x574 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_DA2__GPIO3_IO02 0x1a4 0x574 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_DA2__SRC_BOOT_CFG02 0x1a4 0x574 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_DA2__EPDC_BDR0 0x1a4 0x574 0x000 0x8 0x0
+#define MX6QDL_PAD_EIM_DA3__EIM_AD03 0x1a8 0x578 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_DA3__IPU1_DISP1_DATA06 0x1a8 0x578 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_DA3__IPU1_CSI1_DATA06 0x1a8 0x578 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_DA3__GPIO3_IO03 0x1a8 0x578 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_DA3__SRC_BOOT_CFG03 0x1a8 0x578 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_DA3__EPDC_BDR1 0x1a8 0x578 0x000 0x8 0x0
+#define MX6QDL_PAD_EIM_DA4__EIM_AD04 0x1ac 0x57c 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_DA4__IPU1_DISP1_DATA05 0x1ac 0x57c 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_DA4__IPU1_CSI1_DATA05 0x1ac 0x57c 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_DA4__GPIO3_IO04 0x1ac 0x57c 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_DA4__SRC_BOOT_CFG04 0x1ac 0x57c 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_DA4__EPDC_SDCE0 0x1ac 0x57c 0x000 0x8 0x0
+#define MX6QDL_PAD_EIM_DA5__EIM_AD05 0x1b0 0x580 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_DA5__IPU1_DISP1_DATA04 0x1b0 0x580 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_DA5__IPU1_CSI1_DATA04 0x1b0 0x580 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_DA5__GPIO3_IO05 0x1b0 0x580 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_DA5__SRC_BOOT_CFG05 0x1b0 0x580 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_DA5__EPDC_SDCE1 0x1b0 0x580 0x000 0x8 0x0
+#define MX6QDL_PAD_EIM_DA6__EIM_AD06 0x1b4 0x584 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_DA6__IPU1_DISP1_DATA03 0x1b4 0x584 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_DA6__IPU1_CSI1_DATA03 0x1b4 0x584 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_DA6__GPIO3_IO06 0x1b4 0x584 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_DA6__SRC_BOOT_CFG06 0x1b4 0x584 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_DA6__EPDC_SDCE2 0x1b4 0x584 0x000 0x8 0x0
+#define MX6QDL_PAD_EIM_DA7__EIM_AD07 0x1b8 0x588 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_DA7__IPU1_DISP1_DATA02 0x1b8 0x588 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_DA7__IPU1_CSI1_DATA02 0x1b8 0x588 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_DA7__GPIO3_IO07 0x1b8 0x588 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_DA7__SRC_BOOT_CFG07 0x1b8 0x588 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_DA7__EPDC_SDCE3 0x1b8 0x588 0x000 0x8 0x0
+#define MX6QDL_PAD_EIM_DA8__EIM_AD08 0x1bc 0x58c 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_DA8__IPU1_DISP1_DATA01 0x1bc 0x58c 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_DA8__IPU1_CSI1_DATA01 0x1bc 0x58c 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_DA8__GPIO3_IO08 0x1bc 0x58c 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_DA8__SRC_BOOT_CFG08 0x1bc 0x58c 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_DA8__EPDC_SDCE4 0x1bc 0x58c 0x000 0x8 0x0
+#define MX6QDL_PAD_EIM_DA9__EIM_AD09 0x1c0 0x590 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_DA9__IPU1_DISP1_DATA00 0x1c0 0x590 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_DA9__IPU1_CSI1_DATA00 0x1c0 0x590 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_DA9__GPIO3_IO09 0x1c0 0x590 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_DA9__SRC_BOOT_CFG09 0x1c0 0x590 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_DA9__EPDC_SDCE5 0x1c0 0x590 0x000 0x8 0x0
+#define MX6QDL_PAD_EIM_EB0__EIM_EB0_B 0x1c4 0x594 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_EB0__IPU1_DISP1_DATA11 0x1c4 0x594 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_EB0__IPU1_CSI1_DATA11 0x1c4 0x594 0x88c 0x2 0x1
+#define MX6QDL_PAD_EIM_EB0__CCM_PMIC_READY 0x1c4 0x594 0x7d4 0x4 0x0
+#define MX6QDL_PAD_EIM_EB0__GPIO2_IO28 0x1c4 0x594 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_EB0__SRC_BOOT_CFG27 0x1c4 0x594 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_EB0__EPDC_PWR_COM 0x1c4 0x594 0x000 0x8 0x0
+#define MX6QDL_PAD_EIM_EB1__EIM_EB1_B 0x1c8 0x598 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_EB1__IPU1_DISP1_DATA10 0x1c8 0x598 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_EB1__IPU1_CSI1_DATA10 0x1c8 0x598 0x888 0x2 0x1
+#define MX6QDL_PAD_EIM_EB1__GPIO2_IO29 0x1c8 0x598 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_EB1__SRC_BOOT_CFG28 0x1c8 0x598 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_EB1__EPDC_SDSHR 0x1c8 0x598 0x000 0x8 0x0
+#define MX6QDL_PAD_EIM_EB2__EIM_EB2_B 0x1cc 0x59c 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_EB2__ECSPI1_SS0 0x1cc 0x59c 0x7e4 0x1 0x2
+#define MX6QDL_PAD_EIM_EB2__IPU1_CSI1_DATA19 0x1cc 0x59c 0x8ac 0x3 0x1
+#define MX6QDL_PAD_EIM_EB2__HDMI_TX_DDC_SCL 0x1cc 0x59c 0x860 0x4 0x0
+#define MX6QDL_PAD_EIM_EB2__GPIO2_IO30 0x1cc 0x59c 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_EB2__I2C2_SCL 0x1cc 0x59c 0x870 0x6 0x0
+#define MX6QDL_PAD_EIM_EB2__SRC_BOOT_CFG30 0x1cc 0x59c 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_EB2__EPDC_DATA05 0x1cc 0x59c 0x000 0x8 0x0
+#define MX6QDL_PAD_EIM_EB3__EIM_EB3_B 0x1d0 0x5a0 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_EB3__ECSPI4_RDY 0x1d0 0x5a0 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_EB3__UART3_RTS_B 0x1d0 0x5a0 0x908 0x2 0x3
+#define MX6QDL_PAD_EIM_EB3__UART3_CTS_B 0x1d0 0x5a0 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_EB3__UART1_RI_B 0x1d0 0x5a0 0x000 0x3 0x0
+#define MX6QDL_PAD_EIM_EB3__IPU1_CSI1_HSYNC 0x1d0 0x5a0 0x8b4 0x4 0x1
+#define MX6QDL_PAD_EIM_EB3__GPIO2_IO31 0x1d0 0x5a0 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_EB3__IPU1_DI1_PIN03 0x1d0 0x5a0 0x000 0x6 0x0
+#define MX6QDL_PAD_EIM_EB3__SRC_BOOT_CFG31 0x1d0 0x5a0 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_EB3__EPDC_SDCE0 0x1d0 0x5a0 0x000 0x8 0x0
+#define MX6QDL_PAD_EIM_EB3__EIM_ACLK_FREERUN 0x1d0 0x5a0 0x000 0x9 0x0
+#define MX6QDL_PAD_EIM_LBA__EIM_LBA_B 0x1d4 0x5a4 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_LBA__IPU1_DI1_PIN17 0x1d4 0x5a4 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_LBA__ECSPI2_SS1 0x1d4 0x5a4 0x804 0x2 0x1
+#define MX6QDL_PAD_EIM_LBA__GPIO2_IO27 0x1d4 0x5a4 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_LBA__SRC_BOOT_CFG26 0x1d4 0x5a4 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_LBA__EPDC_DATA04 0x1d4 0x5a4 0x000 0x8 0x0
+#define MX6QDL_PAD_EIM_OE__EIM_OE_B 0x1d8 0x5a8 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_OE__IPU1_DI1_PIN07 0x1d8 0x5a8 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_OE__ECSPI2_MISO 0x1d8 0x5a8 0x7f8 0x2 0x2
+#define MX6QDL_PAD_EIM_OE__GPIO2_IO25 0x1d8 0x5a8 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_OE__EPDC_PWR_IRQ 0x1d8 0x5a8 0x000 0x8 0x0
+#define MX6QDL_PAD_EIM_RW__EIM_RW 0x1dc 0x5ac 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_RW__IPU1_DI1_PIN08 0x1dc 0x5ac 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_RW__ECSPI2_SS0 0x1dc 0x5ac 0x800 0x2 0x2
+#define MX6QDL_PAD_EIM_RW__GPIO2_IO26 0x1dc 0x5ac 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_RW__SRC_BOOT_CFG29 0x1dc 0x5ac 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_RW__EPDC_DATA07 0x1dc 0x5ac 0x000 0x8 0x0
+#define MX6QDL_PAD_EIM_WAIT__EIM_WAIT_B 0x1e0 0x5b0 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_WAIT__EIM_DTACK_B 0x1e0 0x5b0 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_WAIT__GPIO5_IO00 0x1e0 0x5b0 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_WAIT__SRC_BOOT_CFG25 0x1e0 0x5b0 0x000 0x7 0x0
+#define MX6QDL_PAD_ENET_CRS_DV__ENET_RX_EN 0x1e4 0x5b4 0x828 0x1 0x0
+#define MX6QDL_PAD_ENET_CRS_DV__ESAI_TX_CLK 0x1e4 0x5b4 0x840 0x2 0x0
+#define MX6QDL_PAD_ENET_CRS_DV__SPDIF_EXT_CLK 0x1e4 0x5b4 0x8f4 0x3 0x0
+#define MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25 0x1e4 0x5b4 0x000 0x5 0x0
+#define MX6QDL_PAD_ENET_MDC__MLB_DATA 0x1e8 0x5b8 0x8e0 0x0 0x0
+#define MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1e8 0x5b8 0x000 0x1 0x0
+#define MX6QDL_PAD_ENET_MDC__ESAI_TX5_RX0 0x1e8 0x5b8 0x858 0x2 0x0
+#define MX6QDL_PAD_ENET_MDC__ENET_1588_EVENT1_IN 0x1e8 0x5b8 0x000 0x4 0x0
+#define MX6QDL_PAD_ENET_MDC__GPIO1_IO31 0x1e8 0x5b8 0x000 0x5 0x0
+#define MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1ec 0x5bc 0x810 0x1 0x0
+#define MX6QDL_PAD_ENET_MDIO__ESAI_RX_CLK 0x1ec 0x5bc 0x83c 0x2 0x0
+#define MX6QDL_PAD_ENET_MDIO__ENET_1588_EVENT1_OUT 0x1ec 0x5bc 0x000 0x4 0x0
+#define MX6QDL_PAD_ENET_MDIO__GPIO1_IO22 0x1ec 0x5bc 0x000 0x5 0x0
+#define MX6QDL_PAD_ENET_MDIO__SPDIF_LOCK 0x1ec 0x5bc 0x000 0x6 0x0
+#define MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1f0 0x5c0 0x000 0x1 0x0
+#define MX6QDL_PAD_ENET_REF_CLK__ESAI_RX_FS 0x1f0 0x5c0 0x82c 0x2 0x0
+#define MX6QDL_PAD_ENET_REF_CLK__GPIO1_IO23 0x1f0 0x5c0 0x000 0x5 0x0
+#define MX6QDL_PAD_ENET_REF_CLK__SPDIF_SR_CLK 0x1f0 0x5c0 0x000 0x6 0x0
+#define MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID 0x1f4 0x5c4 0x790 0x0 0x0
+#define MX6QDL_PAD_ENET_RX_ER__ENET_RX_ER 0x1f4 0x5c4 0x000 0x1 0x0
+#define MX6QDL_PAD_ENET_RX_ER__ESAI_RX_HF_CLK 0x1f4 0x5c4 0x834 0x2 0x0
+#define MX6QDL_PAD_ENET_RX_ER__SPDIF_IN 0x1f4 0x5c4 0x8f0 0x3 0x1
+#define MX6QDL_PAD_ENET_RX_ER__ENET_1588_EVENT2_OUT 0x1f4 0x5c4 0x000 0x4 0x0
+#define MX6QDL_PAD_ENET_RX_ER__GPIO1_IO24 0x1f4 0x5c4 0x000 0x5 0x0
+#define MX6QDL_PAD_ENET_RXD0__ENET_RX_DATA0 0x1f8 0x5c8 0x818 0x1 0x0
+#define MX6QDL_PAD_ENET_RXD0__ESAI_TX_HF_CLK 0x1f8 0x5c8 0x838 0x2 0x0
+#define MX6QDL_PAD_ENET_RXD0__SPDIF_OUT 0x1f8 0x5c8 0x000 0x3 0x0
+#define MX6QDL_PAD_ENET_RXD0__GPIO1_IO27 0x1f8 0x5c8 0x000 0x5 0x0
+#define MX6QDL_PAD_ENET_RXD1__MLB_SIG 0x1fc 0x5cc 0x8e4 0x0 0x0
+#define MX6QDL_PAD_ENET_RXD1__ENET_RX_DATA1 0x1fc 0x5cc 0x81c 0x1 0x0
+#define MX6QDL_PAD_ENET_RXD1__ESAI_TX_FS 0x1fc 0x5cc 0x830 0x2 0x0
+#define MX6QDL_PAD_ENET_RXD1__ENET_1588_EVENT3_OUT 0x1fc 0x5cc 0x000 0x4 0x0
+#define MX6QDL_PAD_ENET_RXD1__GPIO1_IO26 0x1fc 0x5cc 0x000 0x5 0x0
+#define MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN 0x200 0x5d0 0x000 0x1 0x0
+#define MX6QDL_PAD_ENET_TX_EN__ESAI_TX3_RX2 0x200 0x5d0 0x850 0x2 0x0
+#define MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x200 0x5d0 0x000 0x5 0x0
+#define MX6QDL_PAD_ENET_TX_EN__I2C4_SCL 0x200 0x5d0 0x880 0x9 0x0
+#define MX6QDL_PAD_ENET_TXD0__ENET_TX_DATA0 0x204 0x5d4 0x000 0x1 0x0
+#define MX6QDL_PAD_ENET_TXD0__ESAI_TX4_RX1 0x204 0x5d4 0x854 0x2 0x0
+#define MX6QDL_PAD_ENET_TXD0__GPIO1_IO30 0x204 0x5d4 0x000 0x5 0x0
+#define MX6QDL_PAD_ENET_TXD1__MLB_CLK 0x208 0x5d8 0x8dc 0x0 0x0
+#define MX6QDL_PAD_ENET_TXD1__ENET_TX_DATA1 0x208 0x5d8 0x000 0x1 0x0
+#define MX6QDL_PAD_ENET_TXD1__ESAI_TX2_RX3 0x208 0x5d8 0x84c 0x2 0x0
+#define MX6QDL_PAD_ENET_TXD1__ENET_1588_EVENT0_IN 0x208 0x5d8 0x000 0x4 0x0
+#define MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x208 0x5d8 0x000 0x5 0x0
+#define MX6QDL_PAD_ENET_TXD1__I2C4_SDA 0x208 0x5d8 0x884 0x9 0x0
+#define MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x20c 0x5dc 0x000 0x0 0x0
+#define MX6QDL_PAD_GPIO_0__KEY_COL5 0x20c 0x5dc 0x8c0 0x2 0x1
+#define MX6QDL_PAD_GPIO_0__ASRC_EXT_CLK 0x20c 0x5dc 0x794 0x3 0x0
+#define MX6QDL_PAD_GPIO_0__EPIT1_OUT 0x20c 0x5dc 0x000 0x4 0x0
+#define MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x20c 0x5dc 0x000 0x5 0x0
+#define MX6QDL_PAD_GPIO_0__USB_H1_PWR 0x20c 0x5dc 0x000 0x6 0x0
+#define MX6QDL_PAD_GPIO_0__SNVS_VIO_5 0x20c 0x5dc 0x000 0x7 0x0
+#define MX6QDL_PAD_GPIO_1__ESAI_RX_CLK 0x210 0x5e0 0x83c 0x0 0x1
+#define MX6QDL_PAD_GPIO_1__WDOG2_B 0x210 0x5e0 0x000 0x1 0x0
+#define MX6QDL_PAD_GPIO_1__KEY_ROW5 0x210 0x5e0 0x8cc 0x2 0x1
+#define MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x210 0x5e0 0x790 0x3 0x1
+#define MX6QDL_PAD_GPIO_1__PWM2_OUT 0x210 0x5e0 0x000 0x4 0x0
+#define MX6QDL_PAD_GPIO_1__GPIO1_IO01 0x210 0x5e0 0x000 0x5 0x0
+#define MX6QDL_PAD_GPIO_1__SD1_CD_B 0x210 0x5e0 0x000 0x6 0x0
+#define MX6QDL_PAD_GPIO_16__ESAI_TX3_RX2 0x214 0x5e4 0x850 0x0 0x1
+#define MX6QDL_PAD_GPIO_16__ENET_1588_EVENT2_IN 0x214 0x5e4 0x000 0x1 0x0
+#define MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x214 0x5e4 0x80c 0x2 0x0
+#define MX6QDL_PAD_GPIO_16__SD1_LCTL 0x214 0x5e4 0x000 0x3 0x0
+#define MX6QDL_PAD_GPIO_16__SPDIF_IN 0x214 0x5e4 0x8f0 0x4 0x2
+#define MX6QDL_PAD_GPIO_16__GPIO7_IO11 0x214 0x5e4 0x000 0x5 0x0
+#define MX6QDL_PAD_GPIO_16__I2C3_SDA 0x214 0x5e4 0x87c 0x6 0x1
+#define MX6QDL_PAD_GPIO_16__JTAG_DE_B 0x214 0x5e4 0x000 0x7 0x0
+#define MX6QDL_PAD_GPIO_17__ESAI_TX0 0x218 0x5e8 0x844 0x0 0x0
+#define MX6QDL_PAD_GPIO_17__ENET_1588_EVENT3_IN 0x218 0x5e8 0x000 0x1 0x0
+#define MX6QDL_PAD_GPIO_17__CCM_PMIC_READY 0x218 0x5e8 0x7d4 0x2 0x1
+#define MX6QDL_PAD_GPIO_17__SDMA_EXT_EVENT0 0x218 0x5e8 0x8e8 0x3 0x1
+#define MX6QDL_PAD_GPIO_17__SPDIF_OUT 0x218 0x5e8 0x000 0x4 0x0
+#define MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x218 0x5e8 0x000 0x5 0x0
+#define MX6QDL_PAD_GPIO_18__ESAI_TX1 0x21c 0x5ec 0x848 0x0 0x0
+#define MX6QDL_PAD_GPIO_18__ENET_RX_CLK 0x21c 0x5ec 0x814 0x1 0x0
+#define MX6QDL_PAD_GPIO_18__SD3_VSELECT 0x21c 0x5ec 0x000 0x2 0x0
+#define MX6QDL_PAD_GPIO_18__SDMA_EXT_EVENT1 0x21c 0x5ec 0x8ec 0x3 0x1
+#define MX6QDL_PAD_GPIO_18__ASRC_EXT_CLK 0x21c 0x5ec 0x794 0x4 0x1
+#define MX6QDL_PAD_GPIO_18__GPIO7_IO13 0x21c 0x5ec 0x000 0x5 0x0
+#define MX6QDL_PAD_GPIO_18__SNVS_VIO_5_CTL 0x21c 0x5ec 0x000 0x6 0x0
+#define MX6QDL_PAD_GPIO_19__KEY_COL5 0x220 0x5f0 0x8c0 0x0 0x2
+#define MX6QDL_PAD_GPIO_19__ENET_1588_EVENT0_OUT 0x220 0x5f0 0x000 0x1 0x0
+#define MX6QDL_PAD_GPIO_19__SPDIF_OUT 0x220 0x5f0 0x000 0x2 0x0
+#define MX6QDL_PAD_GPIO_19__CCM_CLKO1 0x220 0x5f0 0x000 0x3 0x0
+#define MX6QDL_PAD_GPIO_19__ECSPI1_RDY 0x220 0x5f0 0x000 0x4 0x0
+#define MX6QDL_PAD_GPIO_19__GPIO4_IO05 0x220 0x5f0 0x000 0x5 0x0
+#define MX6QDL_PAD_GPIO_19__ENET_TX_ER 0x220 0x5f0 0x000 0x6 0x0
+#define MX6QDL_PAD_GPIO_2__ESAI_TX_FS 0x224 0x5f4 0x830 0x0 0x1
+#define MX6QDL_PAD_GPIO_2__KEY_ROW6 0x224 0x5f4 0x8d0 0x2 0x1
+#define MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x224 0x5f4 0x000 0x5 0x0
+#define MX6QDL_PAD_GPIO_2__SD2_WP 0x224 0x5f4 0x000 0x6 0x0
+#define MX6QDL_PAD_GPIO_2__MLB_DATA 0x224 0x5f4 0x8e0 0x7 0x1
+#define MX6QDL_PAD_GPIO_3__ESAI_RX_HF_CLK 0x228 0x5f8 0x834 0x0 0x1
+#define MX6QDL_PAD_GPIO_3__I2C3_SCL 0x228 0x5f8 0x878 0x2 0x1
+#define MX6QDL_PAD_GPIO_3__XTALOSC_REF_CLK_24M 0x228 0x5f8 0x000 0x3 0x0
+#define MX6QDL_PAD_GPIO_3__CCM_CLKO2 0x228 0x5f8 0x000 0x4 0x0
+#define MX6QDL_PAD_GPIO_3__GPIO1_IO03 0x228 0x5f8 0x000 0x5 0x0
+#define MX6QDL_PAD_GPIO_3__USB_H1_OC 0x228 0x5f8 0x924 0x6 0x1
+#define MX6QDL_PAD_GPIO_3__MLB_CLK 0x228 0x5f8 0x8dc 0x7 0x1
+#define MX6QDL_PAD_GPIO_4__ESAI_TX_HF_CLK 0x22c 0x5fc 0x838 0x0 0x1
+#define MX6QDL_PAD_GPIO_4__KEY_COL7 0x22c 0x5fc 0x8c8 0x2 0x1
+#define MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x22c 0x5fc 0x000 0x5 0x0
+#define MX6QDL_PAD_GPIO_4__SD2_CD_B 0x22c 0x5fc 0x000 0x6 0x0
+#define MX6QDL_PAD_GPIO_5__ESAI_TX2_RX3 0x230 0x600 0x84c 0x0 0x1
+#define MX6QDL_PAD_GPIO_5__KEY_ROW7 0x230 0x600 0x8d4 0x2 0x1
+#define MX6QDL_PAD_GPIO_5__CCM_CLKO1 0x230 0x600 0x000 0x3 0x0
+#define MX6QDL_PAD_GPIO_5__GPIO1_IO05 0x230 0x600 0x000 0x5 0x0
+#define MX6QDL_PAD_GPIO_5__I2C3_SCL 0x230 0x600 0x878 0x6 0x2
+#define MX6QDL_PAD_GPIO_5__ARM_EVENTI 0x230 0x600 0x000 0x7 0x0
+#define MX6QDL_PAD_GPIO_6__ESAI_TX_CLK 0x234 0x604 0x840 0x0 0x1
+#define MX6QDL_PAD_GPIO_6__I2C3_SDA 0x234 0x604 0x87c 0x2 0x2
+#define MX6QDL_PAD_GPIO_6__GPIO1_IO06 0x234 0x604 0x000 0x5 0x0
+#define MX6QDL_PAD_GPIO_6__SD2_LCTL 0x234 0x604 0x000 0x6 0x0
+#define MX6QDL_PAD_GPIO_6__MLB_SIG 0x234 0x604 0x8e4 0x7 0x1
+#define MX6QDL_PAD_GPIO_7__ESAI_TX4_RX1 0x238 0x608 0x854 0x0 0x1
+#define MX6QDL_PAD_GPIO_7__EPIT1_OUT 0x238 0x608 0x000 0x2 0x0
+#define MX6QDL_PAD_GPIO_7__FLEXCAN1_TX 0x238 0x608 0x000 0x3 0x0
+#define MX6QDL_PAD_GPIO_7__UART2_TX_DATA 0x238 0x608 0x000 0x4 0x0
+#define MX6QDL_PAD_GPIO_7__UART2_RX_DATA 0x238 0x608 0x904 0x4 0x2
+#define MX6QDL_PAD_GPIO_7__GPIO1_IO07 0x238 0x608 0x000 0x5 0x0
+#define MX6QDL_PAD_GPIO_7__SPDIF_LOCK 0x238 0x608 0x000 0x6 0x0
+#define MX6QDL_PAD_GPIO_7__USB_OTG_HOST_MODE 0x238 0x608 0x000 0x7 0x0
+#define MX6QDL_PAD_GPIO_7__I2C4_SCL 0x238 0x608 0x880 0x8 0x1
+#define MX6QDL_PAD_GPIO_8__ESAI_TX5_RX0 0x23c 0x60c 0x858 0x0 0x1
+#define MX6QDL_PAD_GPIO_8__XTALOSC_REF_CLK_32K 0x23c 0x60c 0x000 0x1 0x0
+#define MX6QDL_PAD_GPIO_8__EPIT2_OUT 0x23c 0x60c 0x000 0x2 0x0
+#define MX6QDL_PAD_GPIO_8__FLEXCAN1_RX 0x23c 0x60c 0x7c8 0x3 0x0
+#define MX6QDL_PAD_GPIO_8__UART2_RX_DATA 0x23c 0x60c 0x904 0x4 0x3
+#define MX6QDL_PAD_GPIO_8__UART2_TX_DATA 0x23c 0x60c 0x000 0x4 0x0
+#define MX6QDL_PAD_GPIO_8__GPIO1_IO08 0x23c 0x60c 0x000 0x5 0x0
+#define MX6QDL_PAD_GPIO_8__SPDIF_SR_CLK 0x23c 0x60c 0x000 0x6 0x0
+#define MX6QDL_PAD_GPIO_8__USB_OTG_PWR_CTL_WAKE 0x23c 0x60c 0x000 0x7 0x0
+#define MX6QDL_PAD_GPIO_8__I2C4_SDA 0x23c 0x60c 0x884 0x8 0x1
+#define MX6QDL_PAD_GPIO_9__ESAI_RX_FS 0x240 0x610 0x82c 0x0 0x1
+#define MX6QDL_PAD_GPIO_9__WDOG1_B 0x240 0x610 0x000 0x1 0x0
+#define MX6QDL_PAD_GPIO_9__KEY_COL6 0x240 0x610 0x8c4 0x2 0x1
+#define MX6QDL_PAD_GPIO_9__CCM_REF_EN_B 0x240 0x610 0x000 0x3 0x0
+#define MX6QDL_PAD_GPIO_9__PWM1_OUT 0x240 0x610 0x000 0x4 0x0
+#define MX6QDL_PAD_GPIO_9__GPIO1_IO09 0x240 0x610 0x000 0x5 0x0
+#define MX6QDL_PAD_GPIO_9__SD1_WP 0x240 0x610 0x92c 0x6 0x1
+#define MX6QDL_PAD_KEY_COL0__ECSPI1_SCLK 0x244 0x62c 0x7d8 0x0 0x3
+#define MX6QDL_PAD_KEY_COL0__ENET_RX_DATA3 0x244 0x62c 0x824 0x1 0x0
+#define MX6QDL_PAD_KEY_COL0__AUD5_TXC 0x244 0x62c 0x7c0 0x2 0x1
+#define MX6QDL_PAD_KEY_COL0__KEY_COL0 0x244 0x62c 0x000 0x3 0x0
+#define MX6QDL_PAD_KEY_COL0__UART4_TX_DATA 0x244 0x62c 0x000 0x4 0x0
+#define MX6QDL_PAD_KEY_COL0__UART4_RX_DATA 0x244 0x62c 0x914 0x4 0x2
+#define MX6QDL_PAD_KEY_COL0__GPIO4_IO06 0x244 0x62c 0x000 0x5 0x0
+#define MX6QDL_PAD_KEY_COL0__DCIC1_OUT 0x244 0x62c 0x000 0x6 0x0
+#define MX6QDL_PAD_KEY_COL1__ECSPI1_MISO 0x248 0x630 0x7dc 0x0 0x3
+#define MX6QDL_PAD_KEY_COL1__ENET_MDIO 0x248 0x630 0x810 0x1 0x1
+#define MX6QDL_PAD_KEY_COL1__AUD5_TXFS 0x248 0x630 0x7c4 0x2 0x1
+#define MX6QDL_PAD_KEY_COL1__KEY_COL1 0x248 0x630 0x000 0x3 0x0
+#define MX6QDL_PAD_KEY_COL1__UART5_TX_DATA 0x248 0x630 0x000 0x4 0x0
+#define MX6QDL_PAD_KEY_COL1__UART5_RX_DATA 0x248 0x630 0x91c 0x4 0x2
+#define MX6QDL_PAD_KEY_COL1__GPIO4_IO08 0x248 0x630 0x000 0x5 0x0
+#define MX6QDL_PAD_KEY_COL1__SD1_VSELECT 0x248 0x630 0x000 0x6 0x0
+#define MX6QDL_PAD_KEY_COL2__ECSPI1_SS1 0x24c 0x634 0x7e8 0x0 0x2
+#define MX6QDL_PAD_KEY_COL2__ENET_RX_DATA2 0x24c 0x634 0x820 0x1 0x0
+#define MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX 0x24c 0x634 0x000 0x2 0x0
+#define MX6QDL_PAD_KEY_COL2__KEY_COL2 0x24c 0x634 0x000 0x3 0x0
+#define MX6QDL_PAD_KEY_COL2__ENET_MDC 0x24c 0x634 0x000 0x4 0x0
+#define MX6QDL_PAD_KEY_COL2__GPIO4_IO10 0x24c 0x634 0x000 0x5 0x0
+#define MX6QDL_PAD_KEY_COL2__USB_H1_PWR_CTL_WAKE 0x24c 0x634 0x000 0x6 0x0
+#define MX6QDL_PAD_KEY_COL3__ECSPI1_SS3 0x250 0x638 0x7f0 0x0 0x1
+#define MX6QDL_PAD_KEY_COL3__ENET_CRS 0x250 0x638 0x000 0x1 0x0
+#define MX6QDL_PAD_KEY_COL3__HDMI_TX_DDC_SCL 0x250 0x638 0x860 0x2 0x1
+#define MX6QDL_PAD_KEY_COL3__KEY_COL3 0x250 0x638 0x000 0x3 0x0
+#define MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x250 0x638 0x870 0x4 0x1
+#define MX6QDL_PAD_KEY_COL3__GPIO4_IO12 0x250 0x638 0x000 0x5 0x0
+#define MX6QDL_PAD_KEY_COL3__SPDIF_IN 0x250 0x638 0x8f0 0x6 0x3
+#define MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX 0x254 0x63c 0x000 0x0 0x0
+#define MX6QDL_PAD_KEY_COL4__IPU1_SISG4 0x254 0x63c 0x000 0x1 0x0
+#define MX6QDL_PAD_KEY_COL4__USB_OTG_OC 0x254 0x63c 0x920 0x2 0x1
+#define MX6QDL_PAD_KEY_COL4__KEY_COL4 0x254 0x63c 0x000 0x3 0x0
+#define MX6QDL_PAD_KEY_COL4__UART5_RTS_B 0x254 0x63c 0x918 0x4 0x2
+#define MX6QDL_PAD_KEY_COL4__UART5_CTS_B 0x254 0x63c 0x000 0x4 0x0
+#define MX6QDL_PAD_KEY_COL4__GPIO4_IO14 0x254 0x63c 0x000 0x5 0x0
+#define MX6QDL_PAD_KEY_ROW0__ECSPI1_MOSI 0x258 0x640 0x7e0 0x0 0x3
+#define MX6QDL_PAD_KEY_ROW0__ENET_TX_DATA3 0x258 0x640 0x000 0x1 0x0
+#define MX6QDL_PAD_KEY_ROW0__AUD5_TXD 0x258 0x640 0x7b4 0x2 0x1
+#define MX6QDL_PAD_KEY_ROW0__KEY_ROW0 0x258 0x640 0x000 0x3 0x0
+#define MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA 0x258 0x640 0x914 0x4 0x3
+#define MX6QDL_PAD_KEY_ROW0__UART4_TX_DATA 0x258 0x640 0x000 0x4 0x0
+#define MX6QDL_PAD_KEY_ROW0__GPIO4_IO07 0x258 0x640 0x000 0x5 0x0
+#define MX6QDL_PAD_KEY_ROW0__DCIC2_OUT 0x258 0x640 0x000 0x6 0x0
+#define MX6QDL_PAD_KEY_ROW1__ECSPI1_SS0 0x25c 0x644 0x7e4 0x0 0x3
+#define MX6QDL_PAD_KEY_ROW1__ENET_COL 0x25c 0x644 0x000 0x1 0x0
+#define MX6QDL_PAD_KEY_ROW1__AUD5_RXD 0x25c 0x644 0x7b0 0x2 0x1
+#define MX6QDL_PAD_KEY_ROW1__KEY_ROW1 0x25c 0x644 0x000 0x3 0x0
+#define MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA 0x25c 0x644 0x91c 0x4 0x3
+#define MX6QDL_PAD_KEY_ROW1__UART5_TX_DATA 0x25c 0x644 0x000 0x4 0x0
+#define MX6QDL_PAD_KEY_ROW1__GPIO4_IO09 0x25c 0x644 0x000 0x5 0x0
+#define MX6QDL_PAD_KEY_ROW1__SD2_VSELECT 0x25c 0x644 0x000 0x6 0x0
+#define MX6QDL_PAD_KEY_ROW2__ECSPI1_SS2 0x260 0x648 0x7ec 0x0 0x1
+#define MX6QDL_PAD_KEY_ROW2__ENET_TX_DATA2 0x260 0x648 0x000 0x1 0x0
+#define MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX 0x260 0x648 0x7c8 0x2 0x1
+#define MX6QDL_PAD_KEY_ROW2__KEY_ROW2 0x260 0x648 0x000 0x3 0x0
+#define MX6QDL_PAD_KEY_ROW2__SD2_VSELECT 0x260 0x648 0x000 0x4 0x0
+#define MX6QDL_PAD_KEY_ROW2__GPIO4_IO11 0x260 0x648 0x000 0x5 0x0
+#define MX6QDL_PAD_KEY_ROW2__HDMI_TX_CEC_LINE 0x260 0x648 0x85c 0x6 0x1
+#define MX6QDL_PAD_KEY_ROW3__ASRC_EXT_CLK 0x264 0x64c 0x794 0x1 0x2
+#define MX6QDL_PAD_KEY_ROW3__HDMI_TX_DDC_SDA 0x264 0x64c 0x864 0x2 0x1
+#define MX6QDL_PAD_KEY_ROW3__KEY_ROW3 0x264 0x64c 0x000 0x3 0x0
+#define MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x264 0x64c 0x874 0x4 0x1
+#define MX6QDL_PAD_KEY_ROW3__GPIO4_IO13 0x264 0x64c 0x000 0x5 0x0
+#define MX6QDL_PAD_KEY_ROW3__SD1_VSELECT 0x264 0x64c 0x000 0x6 0x0
+#define MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX 0x268 0x650 0x7cc 0x0 0x0
+#define MX6QDL_PAD_KEY_ROW4__IPU1_SISG5 0x268 0x650 0x000 0x1 0x0
+#define MX6QDL_PAD_KEY_ROW4__USB_OTG_PWR 0x268 0x650 0x000 0x2 0x0
+#define MX6QDL_PAD_KEY_ROW4__KEY_ROW4 0x268 0x650 0x000 0x3 0x0
+#define MX6QDL_PAD_KEY_ROW4__UART5_CTS_B 0x268 0x650 0x000 0x4 0x0
+#define MX6QDL_PAD_KEY_ROW4__UART5_RTS_B 0x268 0x650 0x918 0x4 0x3
+#define MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x268 0x650 0x000 0x5 0x0
+#define MX6QDL_PAD_NANDF_ALE__NAND_ALE 0x26c 0x654 0x000 0x0 0x0
+#define MX6QDL_PAD_NANDF_ALE__SD4_RESET 0x26c 0x654 0x000 0x1 0x0
+#define MX6QDL_PAD_NANDF_ALE__GPIO6_IO08 0x26c 0x654 0x000 0x5 0x0
+#define MX6QDL_PAD_NANDF_CLE__NAND_CLE 0x270 0x658 0x000 0x0 0x0
+#define MX6QDL_PAD_NANDF_CLE__GPIO6_IO07 0x270 0x658 0x000 0x5 0x0
+#define MX6QDL_PAD_NANDF_CS0__NAND_CE0_B 0x274 0x65c 0x000 0x0 0x0
+#define MX6QDL_PAD_NANDF_CS0__GPIO6_IO11 0x274 0x65c 0x000 0x5 0x0
+#define MX6QDL_PAD_NANDF_CS1__NAND_CE1_B 0x278 0x660 0x000 0x0 0x0
+#define MX6QDL_PAD_NANDF_CS1__SD4_VSELECT 0x278 0x660 0x000 0x1 0x0
+#define MX6QDL_PAD_NANDF_CS1__SD3_VSELECT 0x278 0x660 0x000 0x2 0x0
+#define MX6QDL_PAD_NANDF_CS1__GPIO6_IO14 0x278 0x660 0x000 0x5 0x0
+#define MX6QDL_PAD_NANDF_CS2__NAND_CE2_B 0x27c 0x664 0x000 0x0 0x0
+#define MX6QDL_PAD_NANDF_CS2__IPU1_SISG0 0x27c 0x664 0x000 0x1 0x0
+#define MX6QDL_PAD_NANDF_CS2__ESAI_TX0 0x27c 0x664 0x844 0x2 0x1
+#define MX6QDL_PAD_NANDF_CS2__EIM_CRE 0x27c 0x664 0x000 0x3 0x0
+#define MX6QDL_PAD_NANDF_CS2__CCM_CLKO2 0x27c 0x664 0x000 0x4 0x0
+#define MX6QDL_PAD_NANDF_CS2__GPIO6_IO15 0x27c 0x664 0x000 0x5 0x0
+#define MX6QDL_PAD_NANDF_CS3__NAND_CE3_B 0x280 0x668 0x000 0x0 0x0
+#define MX6QDL_PAD_NANDF_CS3__IPU1_SISG1 0x280 0x668 0x000 0x1 0x0
+#define MX6QDL_PAD_NANDF_CS3__ESAI_TX1 0x280 0x668 0x848 0x2 0x1
+#define MX6QDL_PAD_NANDF_CS3__EIM_ADDR26 0x280 0x668 0x000 0x3 0x0
+#define MX6QDL_PAD_NANDF_CS3__GPIO6_IO16 0x280 0x668 0x000 0x5 0x0
+#define MX6QDL_PAD_NANDF_CS3__I2C4_SDA 0x280 0x668 0x884 0x9 0x2
+#define MX6QDL_PAD_NANDF_D0__NAND_DATA00 0x284 0x66c 0x000 0x0 0x0
+#define MX6QDL_PAD_NANDF_D0__SD1_DATA4 0x284 0x66c 0x000 0x1 0x0
+#define MX6QDL_PAD_NANDF_D0__GPIO2_IO00 0x284 0x66c 0x000 0x5 0x0
+#define MX6QDL_PAD_NANDF_D1__NAND_DATA01 0x288 0x670 0x000 0x0 0x0
+#define MX6QDL_PAD_NANDF_D1__SD1_DATA5 0x288 0x670 0x000 0x1 0x0
+#define MX6QDL_PAD_NANDF_D1__GPIO2_IO01 0x288 0x670 0x000 0x5 0x0
+#define MX6QDL_PAD_NANDF_D2__NAND_DATA02 0x28c 0x674 0x000 0x0 0x0
+#define MX6QDL_PAD_NANDF_D2__SD1_DATA6 0x28c 0x674 0x000 0x1 0x0
+#define MX6QDL_PAD_NANDF_D2__GPIO2_IO02 0x28c 0x674 0x000 0x5 0x0
+#define MX6QDL_PAD_NANDF_D3__NAND_DATA03 0x290 0x678 0x000 0x0 0x0
+#define MX6QDL_PAD_NANDF_D3__SD1_DATA7 0x290 0x678 0x000 0x1 0x0
+#define MX6QDL_PAD_NANDF_D3__GPIO2_IO03 0x290 0x678 0x000 0x5 0x0
+#define MX6QDL_PAD_NANDF_D4__NAND_DATA04 0x294 0x67c 0x000 0x0 0x0
+#define MX6QDL_PAD_NANDF_D4__SD2_DATA4 0x294 0x67c 0x000 0x1 0x0
+#define MX6QDL_PAD_NANDF_D4__GPIO2_IO04 0x294 0x67c 0x000 0x5 0x0
+#define MX6QDL_PAD_NANDF_D5__NAND_DATA05 0x298 0x680 0x000 0x0 0x0
+#define MX6QDL_PAD_NANDF_D5__SD2_DATA5 0x298 0x680 0x000 0x1 0x0
+#define MX6QDL_PAD_NANDF_D5__GPIO2_IO05 0x298 0x680 0x000 0x5 0x0
+#define MX6QDL_PAD_NANDF_D6__NAND_DATA06 0x29c 0x684 0x000 0x0 0x0
+#define MX6QDL_PAD_NANDF_D6__SD2_DATA6 0x29c 0x684 0x000 0x1 0x0
+#define MX6QDL_PAD_NANDF_D6__GPIO2_IO06 0x29c 0x684 0x000 0x5 0x0
+#define MX6QDL_PAD_NANDF_D7__NAND_DATA07 0x2a0 0x688 0x000 0x0 0x0
+#define MX6QDL_PAD_NANDF_D7__SD2_DATA7 0x2a0 0x688 0x000 0x1 0x0
+#define MX6QDL_PAD_NANDF_D7__GPIO2_IO07 0x2a0 0x688 0x000 0x5 0x0
+#define MX6QDL_PAD_NANDF_RB0__NAND_READY_B 0x2a4 0x68c 0x000 0x0 0x0
+#define MX6QDL_PAD_NANDF_RB0__GPIO6_IO10 0x2a4 0x68c 0x000 0x5 0x0
+#define MX6QDL_PAD_NANDF_WP_B__NAND_WP_B 0x2a8 0x690 0x000 0x0 0x0
+#define MX6QDL_PAD_NANDF_WP_B__GPIO6_IO09 0x2a8 0x690 0x000 0x5 0x0
+#define MX6QDL_PAD_NANDF_WP_B__I2C4_SCL 0x2a8 0x690 0x880 0x9 0x2
+#define MX6QDL_PAD_RGMII_RD0__HSI_RX_READY 0x2ac 0x694 0x000 0x0 0x0
+#define MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x2ac 0x694 0x818 0x1 0x1
+#define MX6QDL_PAD_RGMII_RD0__GPIO6_IO25 0x2ac 0x694 0x000 0x5 0x0
+#define MX6QDL_PAD_RGMII_RD1__HSI_TX_FLAG 0x2b0 0x698 0x000 0x0 0x0
+#define MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x2b0 0x698 0x81c 0x1 0x1
+#define MX6QDL_PAD_RGMII_RD1__GPIO6_IO27 0x2b0 0x698 0x000 0x5 0x0
+#define MX6QDL_PAD_RGMII_RD2__HSI_TX_DATA 0x2b4 0x69c 0x000 0x0 0x0
+#define MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x2b4 0x69c 0x820 0x1 0x1
+#define MX6QDL_PAD_RGMII_RD2__GPIO6_IO28 0x2b4 0x69c 0x000 0x5 0x0
+#define MX6QDL_PAD_RGMII_RD3__HSI_TX_WAKE 0x2b8 0x6a0 0x000 0x0 0x0
+#define MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x2b8 0x6a0 0x824 0x1 0x1
+#define MX6QDL_PAD_RGMII_RD3__GPIO6_IO29 0x2b8 0x6a0 0x000 0x5 0x0
+#define MX6QDL_PAD_RGMII_RX_CTL__USB_H3_DATA 0x2bc 0x6a4 0x000 0x0 0x0
+#define MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x2bc 0x6a4 0x828 0x1 0x1
+#define MX6QDL_PAD_RGMII_RX_CTL__GPIO6_IO24 0x2bc 0x6a4 0x000 0x5 0x0
+#define MX6QDL_PAD_RGMII_RXC__USB_H3_STROBE 0x2c0 0x6a8 0x000 0x0 0x0
+#define MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x2c0 0x6a8 0x814 0x1 0x1
+#define MX6QDL_PAD_RGMII_RXC__GPIO6_IO30 0x2c0 0x6a8 0x000 0x5 0x0
+#define MX6QDL_PAD_RGMII_TD0__HSI_TX_READY 0x2c4 0x6ac 0x000 0x0 0x0
+#define MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x2c4 0x6ac 0x000 0x1 0x0
+#define MX6QDL_PAD_RGMII_TD0__GPIO6_IO20 0x2c4 0x6ac 0x000 0x5 0x0
+#define MX6QDL_PAD_RGMII_TD1__HSI_RX_FLAG 0x2c8 0x6b0 0x000 0x0 0x0
+#define MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x2c8 0x6b0 0x000 0x1 0x0
+#define MX6QDL_PAD_RGMII_TD1__GPIO6_IO21 0x2c8 0x6b0 0x000 0x5 0x0
+#define MX6QDL_PAD_RGMII_TD2__HSI_RX_DATA 0x2cc 0x6b4 0x000 0x0 0x0
+#define MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x2cc 0x6b4 0x000 0x1 0x0
+#define MX6QDL_PAD_RGMII_TD2__GPIO6_IO22 0x2cc 0x6b4 0x000 0x5 0x0
+#define MX6QDL_PAD_RGMII_TD3__HSI_RX_WAKE 0x2d0 0x6b8 0x000 0x0 0x0
+#define MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x2d0 0x6b8 0x000 0x1 0x0
+#define MX6QDL_PAD_RGMII_TD3__GPIO6_IO23 0x2d0 0x6b8 0x000 0x5 0x0
+#define MX6QDL_PAD_RGMII_TX_CTL__USB_H2_STROBE 0x2d4 0x6bc 0x000 0x0 0x0
+#define MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x2d4 0x6bc 0x000 0x1 0x0
+#define MX6QDL_PAD_RGMII_TX_CTL__GPIO6_IO26 0x2d4 0x6bc 0x000 0x5 0x0
+#define MX6QDL_PAD_RGMII_TX_CTL__ENET_REF_CLK 0x2d4 0x6bc 0x80c 0x7 0x1
+#define MX6QDL_PAD_RGMII_TXC__USB_H2_DATA 0x2d8 0x6c0 0x000 0x0 0x0
+#define MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x2d8 0x6c0 0x000 0x1 0x0
+#define MX6QDL_PAD_RGMII_TXC__SPDIF_EXT_CLK 0x2d8 0x6c0 0x8f4 0x2 0x1
+#define MX6QDL_PAD_RGMII_TXC__GPIO6_IO19 0x2d8 0x6c0 0x000 0x5 0x0
+#define MX6QDL_PAD_RGMII_TXC__XTALOSC_REF_CLK_24M 0x2d8 0x6c0 0x000 0x7 0x0
+#define MX6QDL_PAD_SD1_CLK__SD1_CLK 0x2dc 0x6c4 0x928 0x0 0x1
+#define MX6QDL_PAD_SD1_CLK__GPT_CLKIN 0x2dc 0x6c4 0x000 0x3 0x0
+#define MX6QDL_PAD_SD1_CLK__GPIO1_IO20 0x2dc 0x6c4 0x000 0x5 0x0
+#define MX6QDL_PAD_SD1_CMD__SD1_CMD 0x2e0 0x6c8 0x000 0x0 0x0
+#define MX6QDL_PAD_SD1_CMD__PWM4_OUT 0x2e0 0x6c8 0x000 0x2 0x0
+#define MX6QDL_PAD_SD1_CMD__GPT_COMPARE1 0x2e0 0x6c8 0x000 0x3 0x0
+#define MX6QDL_PAD_SD1_CMD__GPIO1_IO18 0x2e0 0x6c8 0x000 0x5 0x0
+#define MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x2e4 0x6cc 0x000 0x0 0x0
+#define MX6QDL_PAD_SD1_DAT0__GPT_CAPTURE1 0x2e4 0x6cc 0x000 0x3 0x0
+#define MX6QDL_PAD_SD1_DAT0__GPIO1_IO16 0x2e4 0x6cc 0x000 0x5 0x0
+#define MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x2e8 0x6d0 0x000 0x0 0x0
+#define MX6QDL_PAD_SD1_DAT1__PWM3_OUT 0x2e8 0x6d0 0x000 0x2 0x0
+#define MX6QDL_PAD_SD1_DAT1__GPT_CAPTURE2 0x2e8 0x6d0 0x000 0x3 0x0
+#define MX6QDL_PAD_SD1_DAT1__GPIO1_IO17 0x2e8 0x6d0 0x000 0x5 0x0
+#define MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x2ec 0x6d4 0x000 0x0 0x0
+#define MX6QDL_PAD_SD1_DAT2__GPT_COMPARE2 0x2ec 0x6d4 0x000 0x2 0x0
+#define MX6QDL_PAD_SD1_DAT2__PWM2_OUT 0x2ec 0x6d4 0x000 0x3 0x0
+#define MX6QDL_PAD_SD1_DAT2__WDOG1_B 0x2ec 0x6d4 0x000 0x4 0x0
+#define MX6QDL_PAD_SD1_DAT2__GPIO1_IO19 0x2ec 0x6d4 0x000 0x5 0x0
+#define MX6QDL_PAD_SD1_DAT2__WDOG1_RESET_B_DEB 0x2ec 0x6d4 0x000 0x6 0x0
+#define MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x2f0 0x6d8 0x000 0x0 0x0
+#define MX6QDL_PAD_SD1_DAT3__GPT_COMPARE3 0x2f0 0x6d8 0x000 0x2 0x0
+#define MX6QDL_PAD_SD1_DAT3__PWM1_OUT 0x2f0 0x6d8 0x000 0x3 0x0
+#define MX6QDL_PAD_SD1_DAT3__WDOG2_B 0x2f0 0x6d8 0x000 0x4 0x0
+#define MX6QDL_PAD_SD1_DAT3__GPIO1_IO21 0x2f0 0x6d8 0x000 0x5 0x0
+#define MX6QDL_PAD_SD1_DAT3__WDOG2_RESET_B_DEB 0x2f0 0x6d8 0x000 0x6 0x0
+#define MX6QDL_PAD_SD2_CLK__SD2_CLK 0x2f4 0x6dc 0x930 0x0 0x1
+#define MX6QDL_PAD_SD2_CLK__KEY_COL5 0x2f4 0x6dc 0x8c0 0x2 0x3
+#define MX6QDL_PAD_SD2_CLK__AUD4_RXFS 0x2f4 0x6dc 0x7a4 0x3 0x1
+#define MX6QDL_PAD_SD2_CLK__GPIO1_IO10 0x2f4 0x6dc 0x000 0x5 0x0
+#define MX6QDL_PAD_SD2_CMD__SD2_CMD 0x2f8 0x6e0 0x000 0x0 0x0
+#define MX6QDL_PAD_SD2_CMD__KEY_ROW5 0x2f8 0x6e0 0x8cc 0x2 0x2
+#define MX6QDL_PAD_SD2_CMD__AUD4_RXC 0x2f8 0x6e0 0x7a0 0x3 0x1
+#define MX6QDL_PAD_SD2_CMD__GPIO1_IO11 0x2f8 0x6e0 0x000 0x5 0x0
+#define MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x2fc 0x6e4 0x000 0x0 0x0
+#define MX6QDL_PAD_SD2_DAT0__AUD4_RXD 0x2fc 0x6e4 0x798 0x3 0x1
+#define MX6QDL_PAD_SD2_DAT0__KEY_ROW7 0x2fc 0x6e4 0x8d4 0x4 0x2
+#define MX6QDL_PAD_SD2_DAT0__GPIO1_IO15 0x2fc 0x6e4 0x000 0x5 0x0
+#define MX6QDL_PAD_SD2_DAT0__DCIC2_OUT 0x2fc 0x6e4 0x000 0x6 0x0
+#define MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x300 0x6e8 0x000 0x0 0x0
+#define MX6QDL_PAD_SD2_DAT1__EIM_CS2_B 0x300 0x6e8 0x000 0x2 0x0
+#define MX6QDL_PAD_SD2_DAT1__AUD4_TXFS 0x300 0x6e8 0x7ac 0x3 0x1
+#define MX6QDL_PAD_SD2_DAT1__KEY_COL7 0x300 0x6e8 0x8c8 0x4 0x2
+#define MX6QDL_PAD_SD2_DAT1__GPIO1_IO14 0x300 0x6e8 0x000 0x5 0x0
+#define MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x304 0x6ec 0x000 0x0 0x0
+#define MX6QDL_PAD_SD2_DAT2__EIM_CS3_B 0x304 0x6ec 0x000 0x2 0x0
+#define MX6QDL_PAD_SD2_DAT2__AUD4_TXD 0x304 0x6ec 0x79c 0x3 0x1
+#define MX6QDL_PAD_SD2_DAT2__KEY_ROW6 0x304 0x6ec 0x8d0 0x4 0x2
+#define MX6QDL_PAD_SD2_DAT2__GPIO1_IO13 0x304 0x6ec 0x000 0x5 0x0
+#define MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x308 0x6f0 0x000 0x0 0x0
+#define MX6QDL_PAD_SD2_DAT3__KEY_COL6 0x308 0x6f0 0x8c4 0x2 0x2
+#define MX6QDL_PAD_SD2_DAT3__AUD4_TXC 0x308 0x6f0 0x7a8 0x3 0x1
+#define MX6QDL_PAD_SD2_DAT3__GPIO1_IO12 0x308 0x6f0 0x000 0x5 0x0
+#define MX6QDL_PAD_SD3_CLK__SD3_CLK 0x30c 0x6f4 0x934 0x0 0x1
+#define MX6QDL_PAD_SD3_CLK__UART2_RTS_B 0x30c 0x6f4 0x900 0x1 0x2
+#define MX6QDL_PAD_SD3_CLK__UART2_CTS_B 0x30c 0x6f4 0x000 0x1 0x0
+#define MX6QDL_PAD_SD3_CLK__FLEXCAN1_RX 0x30c 0x6f4 0x7c8 0x2 0x2
+#define MX6QDL_PAD_SD3_CLK__GPIO7_IO03 0x30c 0x6f4 0x000 0x5 0x0
+#define MX6QDL_PAD_SD3_CMD__SD3_CMD 0x310 0x6f8 0x000 0x0 0x0
+#define MX6QDL_PAD_SD3_CMD__UART2_CTS_B 0x310 0x6f8 0x000 0x1 0x0
+#define MX6QDL_PAD_SD3_CMD__UART2_RTS_B 0x310 0x6f8 0x900 0x1 0x3
+#define MX6QDL_PAD_SD3_CMD__FLEXCAN1_TX 0x310 0x6f8 0x000 0x2 0x0
+#define MX6QDL_PAD_SD3_CMD__GPIO7_IO02 0x310 0x6f8 0x000 0x5 0x0
+#define MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x314 0x6fc 0x000 0x0 0x0
+#define MX6QDL_PAD_SD3_DAT0__UART1_CTS_B 0x314 0x6fc 0x000 0x1 0x0
+#define MX6QDL_PAD_SD3_DAT0__UART1_RTS_B 0x314 0x6fc 0x8f8 0x1 0x2
+#define MX6QDL_PAD_SD3_DAT0__FLEXCAN2_TX 0x314 0x6fc 0x000 0x2 0x0
+#define MX6QDL_PAD_SD3_DAT0__GPIO7_IO04 0x314 0x6fc 0x000 0x5 0x0
+#define MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x318 0x700 0x000 0x0 0x0
+#define MX6QDL_PAD_SD3_DAT1__UART1_RTS_B 0x318 0x700 0x8f8 0x1 0x3
+#define MX6QDL_PAD_SD3_DAT1__UART1_CTS_B 0x318 0x700 0x000 0x1 0x0
+#define MX6QDL_PAD_SD3_DAT1__FLEXCAN2_RX 0x318 0x700 0x7cc 0x2 0x1
+#define MX6QDL_PAD_SD3_DAT1__GPIO7_IO05 0x318 0x700 0x000 0x5 0x0
+#define MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x31c 0x704 0x000 0x0 0x0
+#define MX6QDL_PAD_SD3_DAT2__GPIO7_IO06 0x31c 0x704 0x000 0x5 0x0
+#define MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x320 0x708 0x000 0x0 0x0
+#define MX6QDL_PAD_SD3_DAT3__UART3_CTS_B 0x320 0x708 0x000 0x1 0x0
+#define MX6QDL_PAD_SD3_DAT3__UART3_RTS_B 0x320 0x708 0x908 0x1 0x4
+#define MX6QDL_PAD_SD3_DAT3__GPIO7_IO07 0x320 0x708 0x000 0x5 0x0
+#define MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x324 0x70c 0x000 0x0 0x0
+#define MX6QDL_PAD_SD3_DAT4__UART2_RX_DATA 0x324 0x70c 0x904 0x1 0x4
+#define MX6QDL_PAD_SD3_DAT4__UART2_TX_DATA 0x324 0x70c 0x000 0x1 0x0
+#define MX6QDL_PAD_SD3_DAT4__GPIO7_IO01 0x324 0x70c 0x000 0x5 0x0
+#define MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x328 0x710 0x000 0x0 0x0
+#define MX6QDL_PAD_SD3_DAT5__UART2_TX_DATA 0x328 0x710 0x000 0x1 0x0
+#define MX6QDL_PAD_SD3_DAT5__UART2_RX_DATA 0x328 0x710 0x904 0x1 0x5
+#define MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x328 0x710 0x000 0x5 0x0
+#define MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x32c 0x714 0x000 0x0 0x0
+#define MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA 0x32c 0x714 0x8fc 0x1 0x2
+#define MX6QDL_PAD_SD3_DAT6__UART1_TX_DATA 0x32c 0x714 0x000 0x1 0x0
+#define MX6QDL_PAD_SD3_DAT6__GPIO6_IO18 0x32c 0x714 0x000 0x5 0x0
+#define MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x330 0x718 0x000 0x0 0x0
+#define MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA 0x330 0x718 0x000 0x1 0x0
+#define MX6QDL_PAD_SD3_DAT7__UART1_RX_DATA 0x330 0x718 0x8fc 0x1 0x3
+#define MX6QDL_PAD_SD3_DAT7__GPIO6_IO17 0x330 0x718 0x000 0x5 0x0
+#define MX6QDL_PAD_SD3_RST__SD3_RESET 0x334 0x71c 0x000 0x0 0x0
+#define MX6QDL_PAD_SD3_RST__UART3_RTS_B 0x334 0x71c 0x908 0x1 0x5
+#define MX6QDL_PAD_SD3_RST__UART3_CTS_B 0x334 0x71c 0x000 0x1 0x0
+#define MX6QDL_PAD_SD3_RST__GPIO7_IO08 0x334 0x71c 0x000 0x5 0x0
+#define MX6QDL_PAD_SD4_CLK__SD4_CLK 0x338 0x720 0x938 0x0 0x1
+#define MX6QDL_PAD_SD4_CLK__NAND_WE_B 0x338 0x720 0x000 0x1 0x0
+#define MX6QDL_PAD_SD4_CLK__UART3_RX_DATA 0x338 0x720 0x90c 0x2 0x2
+#define MX6QDL_PAD_SD4_CLK__UART3_TX_DATA 0x338 0x720 0x000 0x2 0x0
+#define MX6QDL_PAD_SD4_CLK__GPIO7_IO10 0x338 0x720 0x000 0x5 0x0
+#define MX6QDL_PAD_SD4_CMD__SD4_CMD 0x33c 0x724 0x000 0x0 0x0
+#define MX6QDL_PAD_SD4_CMD__NAND_RE_B 0x33c 0x724 0x000 0x1 0x0
+#define MX6QDL_PAD_SD4_CMD__UART3_TX_DATA 0x33c 0x724 0x000 0x2 0x0
+#define MX6QDL_PAD_SD4_CMD__UART3_RX_DATA 0x33c 0x724 0x90c 0x2 0x3
+#define MX6QDL_PAD_SD4_CMD__GPIO7_IO09 0x33c 0x724 0x000 0x5 0x0
+#define MX6QDL_PAD_SD4_DAT0__SD4_DATA0 0x340 0x728 0x000 0x1 0x0
+#define MX6QDL_PAD_SD4_DAT0__NAND_DQS 0x340 0x728 0x000 0x2 0x0
+#define MX6QDL_PAD_SD4_DAT0__GPIO2_IO08 0x340 0x728 0x000 0x5 0x0
+#define MX6QDL_PAD_SD4_DAT1__SD4_DATA1 0x344 0x72c 0x000 0x1 0x0
+#define MX6QDL_PAD_SD4_DAT1__PWM3_OUT 0x344 0x72c 0x000 0x2 0x0
+#define MX6QDL_PAD_SD4_DAT1__GPIO2_IO09 0x344 0x72c 0x000 0x5 0x0
+#define MX6QDL_PAD_SD4_DAT2__SD4_DATA2 0x348 0x730 0x000 0x1 0x0
+#define MX6QDL_PAD_SD4_DAT2__PWM4_OUT 0x348 0x730 0x000 0x2 0x0
+#define MX6QDL_PAD_SD4_DAT2__GPIO2_IO10 0x348 0x730 0x000 0x5 0x0
+#define MX6QDL_PAD_SD4_DAT3__SD4_DATA3 0x34c 0x734 0x000 0x1 0x0
+#define MX6QDL_PAD_SD4_DAT3__GPIO2_IO11 0x34c 0x734 0x000 0x5 0x0
+#define MX6QDL_PAD_SD4_DAT4__SD4_DATA4 0x350 0x738 0x000 0x1 0x0
+#define MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA 0x350 0x738 0x904 0x2 0x6
+#define MX6QDL_PAD_SD4_DAT4__UART2_TX_DATA 0x350 0x738 0x000 0x2 0x0
+#define MX6QDL_PAD_SD4_DAT4__GPIO2_IO12 0x350 0x738 0x000 0x5 0x0
+#define MX6QDL_PAD_SD4_DAT5__SD4_DATA5 0x354 0x73c 0x000 0x1 0x0
+#define MX6QDL_PAD_SD4_DAT5__UART2_RTS_B 0x354 0x73c 0x900 0x2 0x4
+#define MX6QDL_PAD_SD4_DAT5__UART2_CTS_B 0x354 0x73c 0x000 0x2 0x0
+#define MX6QDL_PAD_SD4_DAT5__GPIO2_IO13 0x354 0x73c 0x000 0x5 0x0
+#define MX6QDL_PAD_SD4_DAT6__SD4_DATA6 0x358 0x740 0x000 0x1 0x0
+#define MX6QDL_PAD_SD4_DAT6__UART2_CTS_B 0x358 0x740 0x000 0x2 0x0
+#define MX6QDL_PAD_SD4_DAT6__UART2_RTS_B 0x358 0x740 0x900 0x2 0x5
+#define MX6QDL_PAD_SD4_DAT6__GPIO2_IO14 0x358 0x740 0x000 0x5 0x0
+#define MX6QDL_PAD_SD4_DAT7__SD4_DATA7 0x35c 0x744 0x000 0x1 0x0
+#define MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA 0x35c 0x744 0x000 0x2 0x0
+#define MX6QDL_PAD_SD4_DAT7__UART2_RX_DATA 0x35c 0x744 0x904 0x2 0x7
+#define MX6QDL_PAD_SD4_DAT7__GPIO2_IO15 0x35c 0x744 0x000 0x5 0x0
#endif /* __DTS_IMX6DL_PINFUNC_H */
diff --git a/arch/arm/boot/dts/imx6dl-sabreauto.dts b/arch/arm/boot/dts/imx6dl-sabreauto.dts
index 95da711..a6ce7b4 100644
--- a/arch/arm/boot/dts/imx6dl-sabreauto.dts
+++ b/arch/arm/boot/dts/imx6dl-sabreauto.dts
@@ -15,25 +15,3 @@
model = "Freescale i.MX6 DualLite/Solo SABRE Automotive Board";
compatible = "fsl,imx6dl-sabreauto", "fsl,imx6dl";
};
-
-&iomuxc {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_hog>;
-
- hog {
- pinctrl_hog: hoggrp {
- fsl,pins = <
- MX6DL_PAD_NANDF_CS2__GPIO6_IO15 0x80000000
- MX6DL_PAD_SD2_DAT2__GPIO1_IO13 0x80000000
- >;
- };
- };
-
- ecspi1 {
- pinctrl_ecspi1_sabreauto: ecspi1-sabreauto {
- fsl,pins = <
- MX6DL_PAD_EIM_D19__GPIO3_IO19 0x80000000
- >;
- };
- };
-};
diff --git a/arch/arm/boot/dts/imx6dl-sabresd.dts b/arch/arm/boot/dts/imx6dl-sabresd.dts
index 8989df2..1e45f2f 100644
--- a/arch/arm/boot/dts/imx6dl-sabresd.dts
+++ b/arch/arm/boot/dts/imx6dl-sabresd.dts
@@ -15,22 +15,3 @@
model = "Freescale i.MX6 DualLite SABRE Smart Device Board";
compatible = "fsl,imx6dl-sabresd", "fsl,imx6dl";
};
-
-&iomuxc {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_hog>;
-
- hog {
- pinctrl_hog: hoggrp {
- fsl,pins = <
- MX6DL_PAD_GPIO_4__GPIO1_IO04 0x80000000
- MX6DL_PAD_GPIO_5__GPIO1_IO05 0x80000000
- MX6DL_PAD_NANDF_D0__GPIO2_IO00 0x80000000
- MX6DL_PAD_NANDF_D1__GPIO2_IO01 0x80000000
- MX6DL_PAD_NANDF_D2__GPIO2_IO02 0x80000000
- MX6DL_PAD_NANDF_D3__GPIO2_IO03 0x80000000
- MX6DL_PAD_GPIO_0__CCM_CLKO1 0x130b0
- >;
- };
- };
-};
diff --git a/arch/arm/boot/dts/imx6dl-wandboard.dts b/arch/arm/boot/dts/imx6dl-wandboard.dts
index bfc59c3..e672891 100644
--- a/arch/arm/boot/dts/imx6dl-wandboard.dts
+++ b/arch/arm/boot/dts/imx6dl-wandboard.dts
@@ -10,6 +10,7 @@
*/
/dts-v1/;
#include "imx6dl.dtsi"
+#include "imx6qdl-wandboard.dtsi"
/ {
model = "Wandboard i.MX6 Dual Lite Board";
@@ -19,26 +20,3 @@
reg = <0x10000000 0x40000000>;
};
};
-
-&fec {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_enet_1>;
- phy-mode = "rgmii";
- status = "okay";
-};
-
-&uart1 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_uart1_1>;
- status = "okay";
-};
-
-&usbh1 {
- status = "okay";
-};
-
-&usdhc3 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_usdhc3_2>;
- status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx6dl.dtsi b/arch/arm/boot/dts/imx6dl.dtsi
index 2b3ecd6..9e8ae11 100644
--- a/arch/arm/boot/dts/imx6dl.dtsi
+++ b/arch/arm/boot/dts/imx6dl.dtsi
@@ -8,8 +8,8 @@
*
*/
-#include "imx6qdl.dtsi"
#include "imx6dl-pinfunc.h"
+#include "imx6qdl.dtsi"
/ {
cpus {
@@ -32,238 +32,15 @@
};
soc {
+ ocram: sram@00900000 {
+ compatible = "mmio-sram";
+ reg = <0x00900000 0x20000>;
+ clocks = <&clks 142>;
+ };
+
aips1: aips-bus@02000000 {
iomuxc: iomuxc@020e0000 {
compatible = "fsl,imx6dl-iomuxc";
- reg = <0x020e0000 0x4000>;
-
- audmux {
- pinctrl_audmux_2: audmux-2 {
- fsl,pins = <
- MX6DL_PAD_CSI0_DAT7__AUD3_RXD 0x80000000
- MX6DL_PAD_CSI0_DAT4__AUD3_TXC 0x80000000
- MX6DL_PAD_CSI0_DAT5__AUD3_TXD 0x80000000
- MX6DL_PAD_CSI0_DAT6__AUD3_TXFS 0x80000000
- >;
- };
- };
-
- ecspi1 {
- pinctrl_ecspi1_1: ecspi1grp-1 {
- fsl,pins = <
- MX6DL_PAD_EIM_D17__ECSPI1_MISO 0x100b1
- MX6DL_PAD_EIM_D18__ECSPI1_MOSI 0x100b1
- MX6DL_PAD_EIM_D16__ECSPI1_SCLK 0x100b1
- >;
- };
- };
-
- enet {
- pinctrl_enet_1: enetgrp-1 {
- fsl,pins = <
- MX6DL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0
- MX6DL_PAD_ENET_MDC__ENET_MDC 0x1b0b0
- MX6DL_PAD_RGMII_TXC__RGMII_TXC 0x1b0b0
- MX6DL_PAD_RGMII_TD0__RGMII_TD0 0x1b0b0
- MX6DL_PAD_RGMII_TD1__RGMII_TD1 0x1b0b0
- MX6DL_PAD_RGMII_TD2__RGMII_TD2 0x1b0b0
- MX6DL_PAD_RGMII_TD3__RGMII_TD3 0x1b0b0
- MX6DL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b0b0
- MX6DL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0
- MX6DL_PAD_RGMII_RXC__RGMII_RXC 0x1b0b0
- MX6DL_PAD_RGMII_RD0__RGMII_RD0 0x1b0b0
- MX6DL_PAD_RGMII_RD1__RGMII_RD1 0x1b0b0
- MX6DL_PAD_RGMII_RD2__RGMII_RD2 0x1b0b0
- MX6DL_PAD_RGMII_RD3__RGMII_RD3 0x1b0b0
- MX6DL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0
- MX6DL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8
- >;
- };
-
- pinctrl_enet_2: enetgrp-2 {
- fsl,pins = <
- MX6DL_PAD_KEY_COL1__ENET_MDIO 0x1b0b0
- MX6DL_PAD_KEY_COL2__ENET_MDC 0x1b0b0
- MX6DL_PAD_RGMII_TXC__RGMII_TXC 0x1b0b0
- MX6DL_PAD_RGMII_TD0__RGMII_TD0 0x1b0b0
- MX6DL_PAD_RGMII_TD1__RGMII_TD1 0x1b0b0
- MX6DL_PAD_RGMII_TD2__RGMII_TD2 0x1b0b0
- MX6DL_PAD_RGMII_TD3__RGMII_TD3 0x1b0b0
- MX6DL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b0b0
- MX6DL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0
- MX6DL_PAD_RGMII_RXC__RGMII_RXC 0x1b0b0
- MX6DL_PAD_RGMII_RD0__RGMII_RD0 0x1b0b0
- MX6DL_PAD_RGMII_RD1__RGMII_RD1 0x1b0b0
- MX6DL_PAD_RGMII_RD2__RGMII_RD2 0x1b0b0
- MX6DL_PAD_RGMII_RD3__RGMII_RD3 0x1b0b0
- MX6DL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0
- >;
- };
- };
-
- gpmi-nand {
- pinctrl_gpmi_nand_1: gpmi-nand-1 {
- fsl,pins = <
- MX6DL_PAD_NANDF_CLE__NAND_CLE 0xb0b1
- MX6DL_PAD_NANDF_ALE__NAND_ALE 0xb0b1
- MX6DL_PAD_NANDF_WP_B__NAND_WP_B 0xb0b1
- MX6DL_PAD_NANDF_RB0__NAND_READY_B 0xb000
- MX6DL_PAD_NANDF_CS0__NAND_CE0_B 0xb0b1
- MX6DL_PAD_NANDF_CS1__NAND_CE1_B 0xb0b1
- MX6DL_PAD_SD4_CMD__NAND_RE_B 0xb0b1
- MX6DL_PAD_SD4_CLK__NAND_WE_B 0xb0b1
- MX6DL_PAD_NANDF_D0__NAND_DATA00 0xb0b1
- MX6DL_PAD_NANDF_D1__NAND_DATA01 0xb0b1
- MX6DL_PAD_NANDF_D2__NAND_DATA02 0xb0b1
- MX6DL_PAD_NANDF_D3__NAND_DATA03 0xb0b1
- MX6DL_PAD_NANDF_D4__NAND_DATA04 0xb0b1
- MX6DL_PAD_NANDF_D5__NAND_DATA05 0xb0b1
- MX6DL_PAD_NANDF_D6__NAND_DATA06 0xb0b1
- MX6DL_PAD_NANDF_D7__NAND_DATA07 0xb0b1
- MX6DL_PAD_SD4_DAT0__NAND_DQS 0x00b1
- >;
- };
- };
-
- i2c1 {
- pinctrl_i2c1_2: i2c1grp-2 {
- fsl,pins = <
- MX6DL_PAD_CSI0_DAT8__I2C1_SDA 0x4001b8b1
- MX6DL_PAD_CSI0_DAT9__I2C1_SCL 0x4001b8b1
- >;
- };
- };
-
- uart1 {
- pinctrl_uart1_1: uart1grp-1 {
- fsl,pins = <
- MX6DL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0b1
- MX6DL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1
- >;
- };
- };
-
- uart4 {
- pinctrl_uart4_1: uart4grp-1 {
- fsl,pins = <
- MX6DL_PAD_KEY_COL0__UART4_TX_DATA 0x1b0b1
- MX6DL_PAD_KEY_ROW0__UART4_RX_DATA 0x1b0b1
- >;
- };
- };
-
- usbotg {
- pinctrl_usbotg_2: usbotggrp-2 {
- fsl,pins = <
- MX6DL_PAD_ENET_RX_ER__USB_OTG_ID 0x17059
- >;
- };
- };
-
- usdhc2 {
- pinctrl_usdhc2_1: usdhc2grp-1 {
- fsl,pins = <
- MX6DL_PAD_SD2_CMD__SD2_CMD 0x17059
- MX6DL_PAD_SD2_CLK__SD2_CLK 0x10059
- MX6DL_PAD_SD2_DAT0__SD2_DATA0 0x17059
- MX6DL_PAD_SD2_DAT1__SD2_DATA1 0x17059
- MX6DL_PAD_SD2_DAT2__SD2_DATA2 0x17059
- MX6DL_PAD_SD2_DAT3__SD2_DATA3 0x17059
- MX6DL_PAD_NANDF_D4__SD2_DATA4 0x17059
- MX6DL_PAD_NANDF_D5__SD2_DATA5 0x17059
- MX6DL_PAD_NANDF_D6__SD2_DATA6 0x17059
- MX6DL_PAD_NANDF_D7__SD2_DATA7 0x17059
- >;
- };
- };
-
- usdhc3 {
- pinctrl_usdhc3_1: usdhc3grp-1 {
- fsl,pins = <
- MX6DL_PAD_SD3_CMD__SD3_CMD 0x17059
- MX6DL_PAD_SD3_CLK__SD3_CLK 0x10059
- MX6DL_PAD_SD3_DAT0__SD3_DATA0 0x17059
- MX6DL_PAD_SD3_DAT1__SD3_DATA1 0x17059
- MX6DL_PAD_SD3_DAT2__SD3_DATA2 0x17059
- MX6DL_PAD_SD3_DAT3__SD3_DATA3 0x17059
- MX6DL_PAD_SD3_DAT4__SD3_DATA4 0x17059
- MX6DL_PAD_SD3_DAT5__SD3_DATA5 0x17059
- MX6DL_PAD_SD3_DAT6__SD3_DATA6 0x17059
- MX6DL_PAD_SD3_DAT7__SD3_DATA7 0x17059
- >;
- };
-
- pinctrl_usdhc3_2: usdhc3grp_2 {
- fsl,pins = <
- MX6DL_PAD_SD3_CMD__SD3_CMD 0x17059
- MX6DL_PAD_SD3_CLK__SD3_CLK 0x10059
- MX6DL_PAD_SD3_DAT0__SD3_DATA0 0x17059
- MX6DL_PAD_SD3_DAT1__SD3_DATA1 0x17059
- MX6DL_PAD_SD3_DAT2__SD3_DATA2 0x17059
- MX6DL_PAD_SD3_DAT3__SD3_DATA3 0x17059
- >;
- };
- };
-
- weim {
- pinctrl_weim_cs0_1: weim_cs0grp-1 {
- fsl,pins = <
- MX6DL_PAD_EIM_CS0__EIM_CS0_B 0xb0b1
- >;
- };
-
- pinctrl_weim_nor_1: weim_norgrp-1 {
- fsl,pins = <
- MX6DL_PAD_EIM_OE__EIM_OE_B 0xb0b1
- MX6DL_PAD_EIM_RW__EIM_RW 0xb0b1
- MX6DL_PAD_EIM_WAIT__EIM_WAIT_B 0xb060
- /* data */
- MX6DL_PAD_EIM_D16__EIM_DATA16 0x1b0b0
- MX6DL_PAD_EIM_D17__EIM_DATA17 0x1b0b0
- MX6DL_PAD_EIM_D18__EIM_DATA18 0x1b0b0
- MX6DL_PAD_EIM_D19__EIM_DATA19 0x1b0b0
- MX6DL_PAD_EIM_D20__EIM_DATA20 0x1b0b0
- MX6DL_PAD_EIM_D21__EIM_DATA21 0x1b0b0
- MX6DL_PAD_EIM_D22__EIM_DATA22 0x1b0b0
- MX6DL_PAD_EIM_D23__EIM_DATA23 0x1b0b0
- MX6DL_PAD_EIM_D24__EIM_DATA24 0x1b0b0
- MX6DL_PAD_EIM_D25__EIM_DATA25 0x1b0b0
- MX6DL_PAD_EIM_D26__EIM_DATA26 0x1b0b0
- MX6DL_PAD_EIM_D27__EIM_DATA27 0x1b0b0
- MX6DL_PAD_EIM_D28__EIM_DATA28 0x1b0b0
- MX6DL_PAD_EIM_D29__EIM_DATA29 0x1b0b0
- MX6DL_PAD_EIM_D30__EIM_DATA30 0x1b0b0
- MX6DL_PAD_EIM_D31__EIM_DATA31 0x1b0b0
- /* address */
- MX6DL_PAD_EIM_A23__EIM_ADDR23 0xb0b1
- MX6DL_PAD_EIM_A22__EIM_ADDR22 0xb0b1
- MX6DL_PAD_EIM_A21__EIM_ADDR21 0xb0b1
- MX6DL_PAD_EIM_A20__EIM_ADDR20 0xb0b1
- MX6DL_PAD_EIM_A19__EIM_ADDR19 0xb0b1
- MX6DL_PAD_EIM_A18__EIM_ADDR18 0xb0b1
- MX6DL_PAD_EIM_A17__EIM_ADDR17 0xb0b1
- MX6DL_PAD_EIM_A16__EIM_ADDR16 0xb0b1
- MX6DL_PAD_EIM_DA15__EIM_AD15 0xb0b1
- MX6DL_PAD_EIM_DA14__EIM_AD14 0xb0b1
- MX6DL_PAD_EIM_DA13__EIM_AD13 0xb0b1
- MX6DL_PAD_EIM_DA12__EIM_AD12 0xb0b1
- MX6DL_PAD_EIM_DA11__EIM_AD11 0xb0b1
- MX6DL_PAD_EIM_DA10__EIM_AD10 0xb0b1
- MX6DL_PAD_EIM_DA9__EIM_AD09 0xb0b1
- MX6DL_PAD_EIM_DA8__EIM_AD08 0xb0b1
- MX6DL_PAD_EIM_DA7__EIM_AD07 0xb0b1
- MX6DL_PAD_EIM_DA6__EIM_AD06 0xb0b1
- MX6DL_PAD_EIM_DA5__EIM_AD05 0xb0b1
- MX6DL_PAD_EIM_DA4__EIM_AD04 0xb0b1
- MX6DL_PAD_EIM_DA3__EIM_AD03 0xb0b1
- MX6DL_PAD_EIM_DA2__EIM_AD02 0xb0b1
- MX6DL_PAD_EIM_DA1__EIM_AD01 0xb0b1
- MX6DL_PAD_EIM_DA0__EIM_AD00 0xb0b1
- >;
- };
-
- };
-
};
pxp: pxp@020f0000 {
@@ -294,3 +71,20 @@
};
};
};
+
+&ldb {
+ clocks = <&clks 33>, <&clks 34>,
+ <&clks 39>, <&clks 40>,
+ <&clks 135>, <&clks 136>;
+ clock-names = "di0_pll", "di1_pll",
+ "di0_sel", "di1_sel",
+ "di0", "di1";
+
+ lvds-channel@0 {
+ crtcs = <&ipu1 0>, <&ipu1 1>;
+ };
+
+ lvds-channel@1 {
+ crtcs = <&ipu1 0>, <&ipu1 1>;
+ };
+};
diff --git a/arch/arm/boot/dts/imx6q-arm2.dts b/arch/arm/boot/dts/imx6q-arm2.dts
index 4e54fde..edf1bd9 100644
--- a/arch/arm/boot/dts/imx6q-arm2.dts
+++ b/arch/arm/boot/dts/imx6q-arm2.dts
@@ -57,7 +57,7 @@
hog {
pinctrl_hog: hoggrp {
fsl,pins = <
- MX6Q_PAD_EIM_D25__GPIO3_IO25 0x80000000
+ MX6QDL_PAD_EIM_D25__GPIO3_IO25 0x80000000
>;
};
};
@@ -65,8 +65,8 @@
arm2 {
pinctrl_usdhc3_arm2: usdhc3grp-arm2 {
fsl,pins = <
- MX6Q_PAD_NANDF_CS0__GPIO6_IO11 0x80000000
- MX6Q_PAD_NANDF_CS1__GPIO6_IO14 0x80000000
+ MX6QDL_PAD_NANDF_CS0__GPIO6_IO11 0x80000000
+ MX6QDL_PAD_NANDF_CS1__GPIO6_IO14 0x80000000
>;
};
};
@@ -97,6 +97,14 @@
status = "okay";
};
+&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart2_2>;
+ fsl,dte-mode;
+ fsl,uart-has-rtscts;
+ status = "okay";
+};
+
&uart4 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart4_1>;
diff --git a/arch/arm/boot/dts/imx6q-phytec-pfla02.dtsi b/arch/arm/boot/dts/imx6q-phytec-pfla02.dtsi
index f5e1981..1a3b50d 100644
--- a/arch/arm/boot/dts/imx6q-phytec-pfla02.dtsi
+++ b/arch/arm/boot/dts/imx6q-phytec-pfla02.dtsi
@@ -20,6 +20,110 @@
};
};
+&ecspi3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ecspi3_1>;
+ status = "okay";
+ fsl,spi-num-chipselects = <1>;
+ cs-gpios = <&gpio4 24 0>;
+
+ flash@0 {
+ compatible = "m25p80";
+ spi-max-frequency = <20000000>;
+ reg = <0>;
+ };
+};
+
+&i2c1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c1_1>;
+ status = "okay";
+
+ eeprom@50 {
+ compatible = "atmel,24c32";
+ reg = <0x50>;
+ };
+
+ pmic@58 {
+ compatible = "dialog,da9063";
+ reg = <0x58>;
+ interrupt-parent = <&gpio4>;
+ interrupts = <17 0x8>; /* active-low GPIO4_17 */
+
+ regulators {
+ vddcore_reg: bcore1 {
+ regulator-min-microvolt = <730000>;
+ regulator-max-microvolt = <1380000>;
+ regulator-always-on;
+ };
+
+ vddsoc_reg: bcore2 {
+ regulator-min-microvolt = <730000>;
+ regulator-max-microvolt = <1380000>;
+ regulator-always-on;
+ };
+
+ vdd_ddr3_reg: bpro {
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-always-on;
+ };
+
+ vdd_3v3_reg: bperi {
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ vdd_buckmem_reg: bmem {
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ vdd_eth_reg: bio {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ };
+
+ vdd_eth_io_reg: ldo4 {
+ regulator-min-microvolt = <2500000>;
+ regulator-max-microvolt = <2500000>;
+ regulator-always-on;
+ };
+
+ vdd_mx6_snvs_reg: ldo5 {
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-always-on;
+ };
+
+ vdd_3v3_pmic_io_reg: ldo6 {
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ vdd_sd0_reg: ldo9 {
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ vdd_sd1_reg: ldo10 {
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ vdd_mx6_high_reg: ldo11 {
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-always-on;
+ };
+ };
+ };
+};
+
&iomuxc {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_hog>;
@@ -27,7 +131,9 @@
hog {
pinctrl_hog: hoggrp {
fsl,pins = <
- MX6Q_PAD_EIM_D23__GPIO3_IO23 0x80000000
+ MX6QDL_PAD_EIM_D23__GPIO3_IO23 0x80000000
+ MX6QDL_PAD_DISP0_DAT3__GPIO4_IO24 0x80000000 /* SPI NOR chipselect */
+ MX6QDL_PAD_DI0_PIN15__GPIO4_IO17 0x80000000 /* PMIC interrupt */
>;
};
};
@@ -35,8 +141,8 @@
pfla02 {
pinctrl_usdhc3_pfla02: usdhc3grp-pfla02 {
fsl,pins = <
- MX6Q_PAD_ENET_RXD0__GPIO1_IO27 0x80000000
- MX6Q_PAD_ENET_TXD1__GPIO1_IO29 0x80000000
+ MX6QDL_PAD_ENET_RXD0__GPIO1_IO27 0x80000000
+ MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x80000000
>;
};
};
diff --git a/arch/arm/boot/dts/imx6q-pinfunc.h b/arch/arm/boot/dts/imx6q-pinfunc.h
index faea6e1..c0e38a4 100644
--- a/arch/arm/boot/dts/imx6q-pinfunc.h
+++ b/arch/arm/boot/dts/imx6q-pinfunc.h
@@ -14,1028 +14,1032 @@
* The pin function ID is a tuple of
* <mux_reg conf_reg input_reg mux_mode input_val>
*/
-#define MX6Q_PAD_SD2_DAT1__SD2_DATA1 0x04c 0x360 0x000 0x0 0x0
-#define MX6Q_PAD_SD2_DAT1__ECSPI5_SS0 0x04c 0x360 0x834 0x1 0x0
-#define MX6Q_PAD_SD2_DAT1__EIM_CS2_B 0x04c 0x360 0x000 0x2 0x0
-#define MX6Q_PAD_SD2_DAT1__AUD4_TXFS 0x04c 0x360 0x7c8 0x3 0x0
-#define MX6Q_PAD_SD2_DAT1__KEY_COL7 0x04c 0x360 0x8f0 0x4 0x0
-#define MX6Q_PAD_SD2_DAT1__GPIO1_IO14 0x04c 0x360 0x000 0x5 0x0
-#define MX6Q_PAD_SD2_DAT2__SD2_DATA2 0x050 0x364 0x000 0x0 0x0
-#define MX6Q_PAD_SD2_DAT2__ECSPI5_SS1 0x050 0x364 0x838 0x1 0x0
-#define MX6Q_PAD_SD2_DAT2__EIM_CS3_B 0x050 0x364 0x000 0x2 0x0
-#define MX6Q_PAD_SD2_DAT2__AUD4_TXD 0x050 0x364 0x7b8 0x3 0x0
-#define MX6Q_PAD_SD2_DAT2__KEY_ROW6 0x050 0x364 0x8f8 0x4 0x0
-#define MX6Q_PAD_SD2_DAT2__GPIO1_IO13 0x050 0x364 0x000 0x5 0x0
-#define MX6Q_PAD_SD2_DAT0__SD2_DATA0 0x054 0x368 0x000 0x0 0x0
-#define MX6Q_PAD_SD2_DAT0__ECSPI5_MISO 0x054 0x368 0x82c 0x1 0x0
-#define MX6Q_PAD_SD2_DAT0__AUD4_RXD 0x054 0x368 0x7b4 0x3 0x0
-#define MX6Q_PAD_SD2_DAT0__KEY_ROW7 0x054 0x368 0x8fc 0x4 0x0
-#define MX6Q_PAD_SD2_DAT0__GPIO1_IO15 0x054 0x368 0x000 0x5 0x0
-#define MX6Q_PAD_SD2_DAT0__DCIC2_OUT 0x054 0x368 0x000 0x6 0x0
-#define MX6Q_PAD_RGMII_TXC__USB_H2_DATA 0x058 0x36c 0x000 0x0 0x0
-#define MX6Q_PAD_RGMII_TXC__RGMII_TXC 0x058 0x36c 0x000 0x1 0x0
-#define MX6Q_PAD_RGMII_TXC__SPDIF_EXT_CLK 0x058 0x36c 0x918 0x2 0x0
-#define MX6Q_PAD_RGMII_TXC__GPIO6_IO19 0x058 0x36c 0x000 0x5 0x0
-#define MX6Q_PAD_RGMII_TXC__XTALOSC_REF_CLK_24M 0x058 0x36c 0x000 0x7 0x0
-#define MX6Q_PAD_RGMII_TD0__HSI_TX_READY 0x05c 0x370 0x000 0x0 0x0
-#define MX6Q_PAD_RGMII_TD0__RGMII_TD0 0x05c 0x370 0x000 0x1 0x0
-#define MX6Q_PAD_RGMII_TD0__GPIO6_IO20 0x05c 0x370 0x000 0x5 0x0
-#define MX6Q_PAD_RGMII_TD1__HSI_RX_FLAG 0x060 0x374 0x000 0x0 0x0
-#define MX6Q_PAD_RGMII_TD1__RGMII_TD1 0x060 0x374 0x000 0x1 0x0
-#define MX6Q_PAD_RGMII_TD1__GPIO6_IO21 0x060 0x374 0x000 0x5 0x0
-#define MX6Q_PAD_RGMII_TD2__HSI_RX_DATA 0x064 0x378 0x000 0x0 0x0
-#define MX6Q_PAD_RGMII_TD2__RGMII_TD2 0x064 0x378 0x000 0x1 0x0
-#define MX6Q_PAD_RGMII_TD2__GPIO6_IO22 0x064 0x378 0x000 0x5 0x0
-#define MX6Q_PAD_RGMII_TD3__HSI_RX_WAKE 0x068 0x37c 0x000 0x0 0x0
-#define MX6Q_PAD_RGMII_TD3__RGMII_TD3 0x068 0x37c 0x000 0x1 0x0
-#define MX6Q_PAD_RGMII_TD3__GPIO6_IO23 0x068 0x37c 0x000 0x5 0x0
-#define MX6Q_PAD_RGMII_RX_CTL__USB_H3_DATA 0x06c 0x380 0x000 0x0 0x0
-#define MX6Q_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x06c 0x380 0x858 0x1 0x0
-#define MX6Q_PAD_RGMII_RX_CTL__GPIO6_IO24 0x06c 0x380 0x000 0x5 0x0
-#define MX6Q_PAD_RGMII_RD0__HSI_RX_READY 0x070 0x384 0x000 0x0 0x0
-#define MX6Q_PAD_RGMII_RD0__RGMII_RD0 0x070 0x384 0x848 0x1 0x0
-#define MX6Q_PAD_RGMII_RD0__GPIO6_IO25 0x070 0x384 0x000 0x5 0x0
-#define MX6Q_PAD_RGMII_TX_CTL__USB_H2_STROBE 0x074 0x388 0x000 0x0 0x0
-#define MX6Q_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x074 0x388 0x000 0x1 0x0
-#define MX6Q_PAD_RGMII_TX_CTL__GPIO6_IO26 0x074 0x388 0x000 0x5 0x0
-#define MX6Q_PAD_RGMII_TX_CTL__ENET_REF_CLK 0x074 0x388 0x83c 0x7 0x0
-#define MX6Q_PAD_RGMII_RD1__HSI_TX_FLAG 0x078 0x38c 0x000 0x0 0x0
-#define MX6Q_PAD_RGMII_RD1__RGMII_RD1 0x078 0x38c 0x84c 0x1 0x0
-#define MX6Q_PAD_RGMII_RD1__GPIO6_IO27 0x078 0x38c 0x000 0x5 0x0
-#define MX6Q_PAD_RGMII_RD2__HSI_TX_DATA 0x07c 0x390 0x000 0x0 0x0
-#define MX6Q_PAD_RGMII_RD2__RGMII_RD2 0x07c 0x390 0x850 0x1 0x0
-#define MX6Q_PAD_RGMII_RD2__GPIO6_IO28 0x07c 0x390 0x000 0x5 0x0
-#define MX6Q_PAD_RGMII_RD3__HSI_TX_WAKE 0x080 0x394 0x000 0x0 0x0
-#define MX6Q_PAD_RGMII_RD3__RGMII_RD3 0x080 0x394 0x854 0x1 0x0
-#define MX6Q_PAD_RGMII_RD3__GPIO6_IO29 0x080 0x394 0x000 0x5 0x0
-#define MX6Q_PAD_RGMII_RXC__USB_H3_STROBE 0x084 0x398 0x000 0x0 0x0
-#define MX6Q_PAD_RGMII_RXC__RGMII_RXC 0x084 0x398 0x844 0x1 0x0
-#define MX6Q_PAD_RGMII_RXC__GPIO6_IO30 0x084 0x398 0x000 0x5 0x0
-#define MX6Q_PAD_EIM_A25__EIM_ADDR25 0x088 0x39c 0x000 0x0 0x0
-#define MX6Q_PAD_EIM_A25__ECSPI4_SS1 0x088 0x39c 0x000 0x1 0x0
-#define MX6Q_PAD_EIM_A25__ECSPI2_RDY 0x088 0x39c 0x000 0x2 0x0
-#define MX6Q_PAD_EIM_A25__IPU1_DI1_PIN12 0x088 0x39c 0x000 0x3 0x0
-#define MX6Q_PAD_EIM_A25__IPU1_DI0_D1_CS 0x088 0x39c 0x000 0x4 0x0
-#define MX6Q_PAD_EIM_A25__GPIO5_IO02 0x088 0x39c 0x000 0x5 0x0
-#define MX6Q_PAD_EIM_A25__HDMI_TX_CEC_LINE 0x088 0x39c 0x88c 0x6 0x0
-#define MX6Q_PAD_EIM_EB2__EIM_EB2_B 0x08c 0x3a0 0x000 0x0 0x0
-#define MX6Q_PAD_EIM_EB2__ECSPI1_SS0 0x08c 0x3a0 0x800 0x1 0x0
-#define MX6Q_PAD_EIM_EB2__IPU2_CSI1_DATA19 0x08c 0x3a0 0x8d4 0x3 0x0
-#define MX6Q_PAD_EIM_EB2__HDMI_TX_DDC_SCL 0x08c 0x3a0 0x890 0x4 0x0
-#define MX6Q_PAD_EIM_EB2__GPIO2_IO30 0x08c 0x3a0 0x000 0x5 0x0
-#define MX6Q_PAD_EIM_EB2__I2C2_SCL 0x08c 0x3a0 0x8a0 0x6 0x0
-#define MX6Q_PAD_EIM_EB2__SRC_BOOT_CFG30 0x08c 0x3a0 0x000 0x7 0x0
-#define MX6Q_PAD_EIM_D16__EIM_DATA16 0x090 0x3a4 0x000 0x0 0x0
-#define MX6Q_PAD_EIM_D16__ECSPI1_SCLK 0x090 0x3a4 0x7f4 0x1 0x0
-#define MX6Q_PAD_EIM_D16__IPU1_DI0_PIN05 0x090 0x3a4 0x000 0x2 0x0
-#define MX6Q_PAD_EIM_D16__IPU2_CSI1_DATA18 0x090 0x3a4 0x8d0 0x3 0x0
-#define MX6Q_PAD_EIM_D16__HDMI_TX_DDC_SDA 0x090 0x3a4 0x894 0x4 0x0
-#define MX6Q_PAD_EIM_D16__GPIO3_IO16 0x090 0x3a4 0x000 0x5 0x0
-#define MX6Q_PAD_EIM_D16__I2C2_SDA 0x090 0x3a4 0x8a4 0x6 0x0
-#define MX6Q_PAD_EIM_D17__EIM_DATA17 0x094 0x3a8 0x000 0x0 0x0
-#define MX6Q_PAD_EIM_D17__ECSPI1_MISO 0x094 0x3a8 0x7f8 0x1 0x0
-#define MX6Q_PAD_EIM_D17__IPU1_DI0_PIN06 0x094 0x3a8 0x000 0x2 0x0
-#define MX6Q_PAD_EIM_D17__IPU2_CSI1_PIXCLK 0x094 0x3a8 0x8e0 0x3 0x0
-#define MX6Q_PAD_EIM_D17__DCIC1_OUT 0x094 0x3a8 0x000 0x4 0x0
-#define MX6Q_PAD_EIM_D17__GPIO3_IO17 0x094 0x3a8 0x000 0x5 0x0
-#define MX6Q_PAD_EIM_D17__I2C3_SCL 0x094 0x3a8 0x8a8 0x6 0x0
-#define MX6Q_PAD_EIM_D18__EIM_DATA18 0x098 0x3ac 0x000 0x0 0x0
-#define MX6Q_PAD_EIM_D18__ECSPI1_MOSI 0x098 0x3ac 0x7fc 0x1 0x0
-#define MX6Q_PAD_EIM_D18__IPU1_DI0_PIN07 0x098 0x3ac 0x000 0x2 0x0
-#define MX6Q_PAD_EIM_D18__IPU2_CSI1_DATA17 0x098 0x3ac 0x8cc 0x3 0x0
-#define MX6Q_PAD_EIM_D18__IPU1_DI1_D0_CS 0x098 0x3ac 0x000 0x4 0x0
-#define MX6Q_PAD_EIM_D18__GPIO3_IO18 0x098 0x3ac 0x000 0x5 0x0
-#define MX6Q_PAD_EIM_D18__I2C3_SDA 0x098 0x3ac 0x8ac 0x6 0x0
-#define MX6Q_PAD_EIM_D19__EIM_DATA19 0x09c 0x3b0 0x000 0x0 0x0
-#define MX6Q_PAD_EIM_D19__ECSPI1_SS1 0x09c 0x3b0 0x804 0x1 0x0
-#define MX6Q_PAD_EIM_D19__IPU1_DI0_PIN08 0x09c 0x3b0 0x000 0x2 0x0
-#define MX6Q_PAD_EIM_D19__IPU2_CSI1_DATA16 0x09c 0x3b0 0x8c8 0x3 0x0
-#define MX6Q_PAD_EIM_D19__UART1_CTS_B 0x09c 0x3b0 0x000 0x4 0x0
-#define MX6Q_PAD_EIM_D19__UART1_RTS_B 0x09c 0x3b0 0x91c 0x4 0x0
-#define MX6Q_PAD_EIM_D19__GPIO3_IO19 0x09c 0x3b0 0x000 0x5 0x0
-#define MX6Q_PAD_EIM_D19__EPIT1_OUT 0x09c 0x3b0 0x000 0x6 0x0
-#define MX6Q_PAD_EIM_D20__EIM_DATA20 0x0a0 0x3b4 0x000 0x0 0x0
-#define MX6Q_PAD_EIM_D20__ECSPI4_SS0 0x0a0 0x3b4 0x824 0x1 0x0
-#define MX6Q_PAD_EIM_D20__IPU1_DI0_PIN16 0x0a0 0x3b4 0x000 0x2 0x0
-#define MX6Q_PAD_EIM_D20__IPU2_CSI1_DATA15 0x0a0 0x3b4 0x8c4 0x3 0x0
-#define MX6Q_PAD_EIM_D20__UART1_RTS_B 0x0a0 0x3b4 0x91c 0x4 0x1
-#define MX6Q_PAD_EIM_D20__UART1_CTS_B 0x0a0 0x3b4 0x000 0x4 0x0
-#define MX6Q_PAD_EIM_D20__GPIO3_IO20 0x0a0 0x3b4 0x000 0x5 0x0
-#define MX6Q_PAD_EIM_D20__EPIT2_OUT 0x0a0 0x3b4 0x000 0x6 0x0
-#define MX6Q_PAD_EIM_D21__EIM_DATA21 0x0a4 0x3b8 0x000 0x0 0x0
-#define MX6Q_PAD_EIM_D21__ECSPI4_SCLK 0x0a4 0x3b8 0x000 0x1 0x0
-#define MX6Q_PAD_EIM_D21__IPU1_DI0_PIN17 0x0a4 0x3b8 0x000 0x2 0x0
-#define MX6Q_PAD_EIM_D21__IPU2_CSI1_DATA11 0x0a4 0x3b8 0x8b4 0x3 0x0
-#define MX6Q_PAD_EIM_D21__USB_OTG_OC 0x0a4 0x3b8 0x944 0x4 0x0
-#define MX6Q_PAD_EIM_D21__GPIO3_IO21 0x0a4 0x3b8 0x000 0x5 0x0
-#define MX6Q_PAD_EIM_D21__I2C1_SCL 0x0a4 0x3b8 0x898 0x6 0x0
-#define MX6Q_PAD_EIM_D21__SPDIF_IN 0x0a4 0x3b8 0x914 0x7 0x0
-#define MX6Q_PAD_EIM_D22__EIM_DATA22 0x0a8 0x3bc 0x000 0x0 0x0
-#define MX6Q_PAD_EIM_D22__ECSPI4_MISO 0x0a8 0x3bc 0x000 0x1 0x0
-#define MX6Q_PAD_EIM_D22__IPU1_DI0_PIN01 0x0a8 0x3bc 0x000 0x2 0x0
-#define MX6Q_PAD_EIM_D22__IPU2_CSI1_DATA10 0x0a8 0x3bc 0x8b0 0x3 0x0
-#define MX6Q_PAD_EIM_D22__USB_OTG_PWR 0x0a8 0x3bc 0x000 0x4 0x0
-#define MX6Q_PAD_EIM_D22__GPIO3_IO22 0x0a8 0x3bc 0x000 0x5 0x0
-#define MX6Q_PAD_EIM_D22__SPDIF_OUT 0x0a8 0x3bc 0x000 0x6 0x0
-#define MX6Q_PAD_EIM_D23__EIM_DATA23 0x0ac 0x3c0 0x000 0x0 0x0
-#define MX6Q_PAD_EIM_D23__IPU1_DI0_D0_CS 0x0ac 0x3c0 0x000 0x1 0x0
-#define MX6Q_PAD_EIM_D23__UART3_CTS_B 0x0ac 0x3c0 0x000 0x2 0x0
-#define MX6Q_PAD_EIM_D23__UART3_RTS_B 0x0ac 0x3c0 0x92c 0x2 0x0
-#define MX6Q_PAD_EIM_D23__UART1_DCD_B 0x0ac 0x3c0 0x000 0x3 0x0
-#define MX6Q_PAD_EIM_D23__IPU2_CSI1_DATA_EN 0x0ac 0x3c0 0x8d8 0x4 0x0
-#define MX6Q_PAD_EIM_D23__GPIO3_IO23 0x0ac 0x3c0 0x000 0x5 0x0
-#define MX6Q_PAD_EIM_D23__IPU1_DI1_PIN02 0x0ac 0x3c0 0x000 0x6 0x0
-#define MX6Q_PAD_EIM_D23__IPU1_DI1_PIN14 0x0ac 0x3c0 0x000 0x7 0x0
-#define MX6Q_PAD_EIM_EB3__EIM_EB3_B 0x0b0 0x3c4 0x000 0x0 0x0
-#define MX6Q_PAD_EIM_EB3__ECSPI4_RDY 0x0b0 0x3c4 0x000 0x1 0x0
-#define MX6Q_PAD_EIM_EB3__UART3_RTS_B 0x0b0 0x3c4 0x92c 0x2 0x1
-#define MX6Q_PAD_EIM_EB3__UART3_CTS_B 0x0b0 0x3c4 0x000 0x2 0x0
-#define MX6Q_PAD_EIM_EB3__UART1_RI_B 0x0b0 0x3c4 0x000 0x3 0x0
-#define MX6Q_PAD_EIM_EB3__IPU2_CSI1_HSYNC 0x0b0 0x3c4 0x8dc 0x4 0x0
-#define MX6Q_PAD_EIM_EB3__GPIO2_IO31 0x0b0 0x3c4 0x000 0x5 0x0
-#define MX6Q_PAD_EIM_EB3__IPU1_DI1_PIN03 0x0b0 0x3c4 0x000 0x6 0x0
-#define MX6Q_PAD_EIM_EB3__SRC_BOOT_CFG31 0x0b0 0x3c4 0x000 0x7 0x0
-#define MX6Q_PAD_EIM_D24__EIM_DATA24 0x0b4 0x3c8 0x000 0x0 0x0
-#define MX6Q_PAD_EIM_D24__ECSPI4_SS2 0x0b4 0x3c8 0x000 0x1 0x0
-#define MX6Q_PAD_EIM_D24__UART3_TX_DATA 0x0b4 0x3c8 0x000 0x2 0x0
-#define MX6Q_PAD_EIM_D24__UART3_RX_DATA 0x0b4 0x3c8 0x930 0x2 0x0
-#define MX6Q_PAD_EIM_D24__ECSPI1_SS2 0x0b4 0x3c8 0x808 0x3 0x0
-#define MX6Q_PAD_EIM_D24__ECSPI2_SS2 0x0b4 0x3c8 0x000 0x4 0x0
-#define MX6Q_PAD_EIM_D24__GPIO3_IO24 0x0b4 0x3c8 0x000 0x5 0x0
-#define MX6Q_PAD_EIM_D24__AUD5_RXFS 0x0b4 0x3c8 0x7d8 0x6 0x0
-#define MX6Q_PAD_EIM_D24__UART1_DTR_B 0x0b4 0x3c8 0x000 0x7 0x0
-#define MX6Q_PAD_EIM_D25__EIM_DATA25 0x0b8 0x3cc 0x000 0x0 0x0
-#define MX6Q_PAD_EIM_D25__ECSPI4_SS3 0x0b8 0x3cc 0x000 0x1 0x0
-#define MX6Q_PAD_EIM_D25__UART3_RX_DATA 0x0b8 0x3cc 0x930 0x2 0x1
-#define MX6Q_PAD_EIM_D25__UART3_TX_DATA 0x0b8 0x3cc 0x000 0x2 0x0
-#define MX6Q_PAD_EIM_D25__ECSPI1_SS3 0x0b8 0x3cc 0x80c 0x3 0x0
-#define MX6Q_PAD_EIM_D25__ECSPI2_SS3 0x0b8 0x3cc 0x000 0x4 0x0
-#define MX6Q_PAD_EIM_D25__GPIO3_IO25 0x0b8 0x3cc 0x000 0x5 0x0
-#define MX6Q_PAD_EIM_D25__AUD5_RXC 0x0b8 0x3cc 0x7d4 0x6 0x0
-#define MX6Q_PAD_EIM_D25__UART1_DSR_B 0x0b8 0x3cc 0x000 0x7 0x0
-#define MX6Q_PAD_EIM_D26__EIM_DATA26 0x0bc 0x3d0 0x000 0x0 0x0
-#define MX6Q_PAD_EIM_D26__IPU1_DI1_PIN11 0x0bc 0x3d0 0x000 0x1 0x0
-#define MX6Q_PAD_EIM_D26__IPU1_CSI0_DATA01 0x0bc 0x3d0 0x000 0x2 0x0
-#define MX6Q_PAD_EIM_D26__IPU2_CSI1_DATA14 0x0bc 0x3d0 0x8c0 0x3 0x0
-#define MX6Q_PAD_EIM_D26__UART2_TX_DATA 0x0bc 0x3d0 0x000 0x4 0x0
-#define MX6Q_PAD_EIM_D26__UART2_RX_DATA 0x0bc 0x3d0 0x928 0x4 0x0
-#define MX6Q_PAD_EIM_D26__GPIO3_IO26 0x0bc 0x3d0 0x000 0x5 0x0
-#define MX6Q_PAD_EIM_D26__IPU1_SISG2 0x0bc 0x3d0 0x000 0x6 0x0
-#define MX6Q_PAD_EIM_D26__IPU1_DISP1_DATA22 0x0bc 0x3d0 0x000 0x7 0x0
-#define MX6Q_PAD_EIM_D27__EIM_DATA27 0x0c0 0x3d4 0x000 0x0 0x0
-#define MX6Q_PAD_EIM_D27__IPU1_DI1_PIN13 0x0c0 0x3d4 0x000 0x1 0x0
-#define MX6Q_PAD_EIM_D27__IPU1_CSI0_DATA00 0x0c0 0x3d4 0x000 0x2 0x0
-#define MX6Q_PAD_EIM_D27__IPU2_CSI1_DATA13 0x0c0 0x3d4 0x8bc 0x3 0x0
-#define MX6Q_PAD_EIM_D27__UART2_RX_DATA 0x0c0 0x3d4 0x928 0x4 0x1
-#define MX6Q_PAD_EIM_D27__UART2_TX_DATA 0x0c0 0x3d4 0x000 0x4 0x0
-#define MX6Q_PAD_EIM_D27__GPIO3_IO27 0x0c0 0x3d4 0x000 0x5 0x0
-#define MX6Q_PAD_EIM_D27__IPU1_SISG3 0x0c0 0x3d4 0x000 0x6 0x0
-#define MX6Q_PAD_EIM_D27__IPU1_DISP1_DATA23 0x0c0 0x3d4 0x000 0x7 0x0
-#define MX6Q_PAD_EIM_D28__EIM_DATA28 0x0c4 0x3d8 0x000 0x0 0x0
-#define MX6Q_PAD_EIM_D28__I2C1_SDA 0x0c4 0x3d8 0x89c 0x1 0x0
-#define MX6Q_PAD_EIM_D28__ECSPI4_MOSI 0x0c4 0x3d8 0x000 0x2 0x0
-#define MX6Q_PAD_EIM_D28__IPU2_CSI1_DATA12 0x0c4 0x3d8 0x8b8 0x3 0x0
-#define MX6Q_PAD_EIM_D28__UART2_CTS_B 0x0c4 0x3d8 0x000 0x4 0x0
-#define MX6Q_PAD_EIM_D28__UART2_RTS_B 0x0c4 0x3d8 0x924 0x4 0x0
-#define MX6Q_PAD_EIM_D28__GPIO3_IO28 0x0c4 0x3d8 0x000 0x5 0x0
-#define MX6Q_PAD_EIM_D28__IPU1_EXT_TRIG 0x0c4 0x3d8 0x000 0x6 0x0
-#define MX6Q_PAD_EIM_D28__IPU1_DI0_PIN13 0x0c4 0x3d8 0x000 0x7 0x0
-#define MX6Q_PAD_EIM_D29__EIM_DATA29 0x0c8 0x3dc 0x000 0x0 0x0
-#define MX6Q_PAD_EIM_D29__IPU1_DI1_PIN15 0x0c8 0x3dc 0x000 0x1 0x0
-#define MX6Q_PAD_EIM_D29__ECSPI4_SS0 0x0c8 0x3dc 0x824 0x2 0x1
-#define MX6Q_PAD_EIM_D29__UART2_RTS_B 0x0c8 0x3dc 0x924 0x4 0x1
-#define MX6Q_PAD_EIM_D29__UART2_CTS_B 0x0c8 0x3dc 0x000 0x4 0x0
-#define MX6Q_PAD_EIM_D29__GPIO3_IO29 0x0c8 0x3dc 0x000 0x5 0x0
-#define MX6Q_PAD_EIM_D29__IPU2_CSI1_VSYNC 0x0c8 0x3dc 0x8e4 0x6 0x0
-#define MX6Q_PAD_EIM_D29__IPU1_DI0_PIN14 0x0c8 0x3dc 0x000 0x7 0x0
-#define MX6Q_PAD_EIM_D30__EIM_DATA30 0x0cc 0x3e0 0x000 0x0 0x0
-#define MX6Q_PAD_EIM_D30__IPU1_DISP1_DATA21 0x0cc 0x3e0 0x000 0x1 0x0
-#define MX6Q_PAD_EIM_D30__IPU1_DI0_PIN11 0x0cc 0x3e0 0x000 0x2 0x0
-#define MX6Q_PAD_EIM_D30__IPU1_CSI0_DATA03 0x0cc 0x3e0 0x000 0x3 0x0
-#define MX6Q_PAD_EIM_D30__UART3_CTS_B 0x0cc 0x3e0 0x000 0x4 0x0
-#define MX6Q_PAD_EIM_D30__UART3_RTS_B 0x0cc 0x3e0 0x92c 0x4 0x2
-#define MX6Q_PAD_EIM_D30__GPIO3_IO30 0x0cc 0x3e0 0x000 0x5 0x0
-#define MX6Q_PAD_EIM_D30__USB_H1_OC 0x0cc 0x3e0 0x948 0x6 0x0
-#define MX6Q_PAD_EIM_D31__EIM_DATA31 0x0d0 0x3e4 0x000 0x0 0x0
-#define MX6Q_PAD_EIM_D31__IPU1_DISP1_DATA20 0x0d0 0x3e4 0x000 0x1 0x0
-#define MX6Q_PAD_EIM_D31__IPU1_DI0_PIN12 0x0d0 0x3e4 0x000 0x2 0x0
-#define MX6Q_PAD_EIM_D31__IPU1_CSI0_DATA02 0x0d0 0x3e4 0x000 0x3 0x0
-#define MX6Q_PAD_EIM_D31__UART3_RTS_B 0x0d0 0x3e4 0x92c 0x4 0x3
-#define MX6Q_PAD_EIM_D31__UART3_CTS_B 0x0d0 0x3e4 0x000 0x4 0x0
-#define MX6Q_PAD_EIM_D31__GPIO3_IO31 0x0d0 0x3e4 0x000 0x5 0x0
-#define MX6Q_PAD_EIM_D31__USB_H1_PWR 0x0d0 0x3e4 0x000 0x6 0x0
-#define MX6Q_PAD_EIM_A24__EIM_ADDR24 0x0d4 0x3e8 0x000 0x0 0x0
-#define MX6Q_PAD_EIM_A24__IPU1_DISP1_DATA19 0x0d4 0x3e8 0x000 0x1 0x0
-#define MX6Q_PAD_EIM_A24__IPU2_CSI1_DATA19 0x0d4 0x3e8 0x8d4 0x2 0x1
-#define MX6Q_PAD_EIM_A24__IPU2_SISG2 0x0d4 0x3e8 0x000 0x3 0x0
-#define MX6Q_PAD_EIM_A24__IPU1_SISG2 0x0d4 0x3e8 0x000 0x4 0x0
-#define MX6Q_PAD_EIM_A24__GPIO5_IO04 0x0d4 0x3e8 0x000 0x5 0x0
-#define MX6Q_PAD_EIM_A24__SRC_BOOT_CFG24 0x0d4 0x3e8 0x000 0x7 0x0
-#define MX6Q_PAD_EIM_A23__EIM_ADDR23 0x0d8 0x3ec 0x000 0x0 0x0
-#define MX6Q_PAD_EIM_A23__IPU1_DISP1_DATA18 0x0d8 0x3ec 0x000 0x1 0x0
-#define MX6Q_PAD_EIM_A23__IPU2_CSI1_DATA18 0x0d8 0x3ec 0x8d0 0x2 0x1
-#define MX6Q_PAD_EIM_A23__IPU2_SISG3 0x0d8 0x3ec 0x000 0x3 0x0
-#define MX6Q_PAD_EIM_A23__IPU1_SISG3 0x0d8 0x3ec 0x000 0x4 0x0
-#define MX6Q_PAD_EIM_A23__GPIO6_IO06 0x0d8 0x3ec 0x000 0x5 0x0
-#define MX6Q_PAD_EIM_A23__SRC_BOOT_CFG23 0x0d8 0x3ec 0x000 0x7 0x0
-#define MX6Q_PAD_EIM_A22__EIM_ADDR22 0x0dc 0x3f0 0x000 0x0 0x0
-#define MX6Q_PAD_EIM_A22__IPU1_DISP1_DATA17 0x0dc 0x3f0 0x000 0x1 0x0
-#define MX6Q_PAD_EIM_A22__IPU2_CSI1_DATA17 0x0dc 0x3f0 0x8cc 0x2 0x1
-#define MX6Q_PAD_EIM_A22__GPIO2_IO16 0x0dc 0x3f0 0x000 0x5 0x0
-#define MX6Q_PAD_EIM_A22__SRC_BOOT_CFG22 0x0dc 0x3f0 0x000 0x7 0x0
-#define MX6Q_PAD_EIM_A21__EIM_ADDR21 0x0e0 0x3f4 0x000 0x0 0x0
-#define MX6Q_PAD_EIM_A21__IPU1_DISP1_DATA16 0x0e0 0x3f4 0x000 0x1 0x0
-#define MX6Q_PAD_EIM_A21__IPU2_CSI1_DATA16 0x0e0 0x3f4 0x8c8 0x2 0x1
-#define MX6Q_PAD_EIM_A21__GPIO2_IO17 0x0e0 0x3f4 0x000 0x5 0x0
-#define MX6Q_PAD_EIM_A21__SRC_BOOT_CFG21 0x0e0 0x3f4 0x000 0x7 0x0
-#define MX6Q_PAD_EIM_A20__EIM_ADDR20 0x0e4 0x3f8 0x000 0x0 0x0
-#define MX6Q_PAD_EIM_A20__IPU1_DISP1_DATA15 0x0e4 0x3f8 0x000 0x1 0x0
-#define MX6Q_PAD_EIM_A20__IPU2_CSI1_DATA15 0x0e4 0x3f8 0x8c4 0x2 0x1
-#define MX6Q_PAD_EIM_A20__GPIO2_IO18 0x0e4 0x3f8 0x000 0x5 0x0
-#define MX6Q_PAD_EIM_A20__SRC_BOOT_CFG20 0x0e4 0x3f8 0x000 0x7 0x0
-#define MX6Q_PAD_EIM_A19__EIM_ADDR19 0x0e8 0x3fc 0x000 0x0 0x0
-#define MX6Q_PAD_EIM_A19__IPU1_DISP1_DATA14 0x0e8 0x3fc 0x000 0x1 0x0
-#define MX6Q_PAD_EIM_A19__IPU2_CSI1_DATA14 0x0e8 0x3fc 0x8c0 0x2 0x1
-#define MX6Q_PAD_EIM_A19__GPIO2_IO19 0x0e8 0x3fc 0x000 0x5 0x0
-#define MX6Q_PAD_EIM_A19__SRC_BOOT_CFG19 0x0e8 0x3fc 0x000 0x7 0x0
-#define MX6Q_PAD_EIM_A18__EIM_ADDR18 0x0ec 0x400 0x000 0x0 0x0
-#define MX6Q_PAD_EIM_A18__IPU1_DISP1_DATA13 0x0ec 0x400 0x000 0x1 0x0
-#define MX6Q_PAD_EIM_A18__IPU2_CSI1_DATA13 0x0ec 0x400 0x8bc 0x2 0x1
-#define MX6Q_PAD_EIM_A18__GPIO2_IO20 0x0ec 0x400 0x000 0x5 0x0
-#define MX6Q_PAD_EIM_A18__SRC_BOOT_CFG18 0x0ec 0x400 0x000 0x7 0x0
-#define MX6Q_PAD_EIM_A17__EIM_ADDR17 0x0f0 0x404 0x000 0x0 0x0
-#define MX6Q_PAD_EIM_A17__IPU1_DISP1_DATA12 0x0f0 0x404 0x000 0x1 0x0
-#define MX6Q_PAD_EIM_A17__IPU2_CSI1_DATA12 0x0f0 0x404 0x8b8 0x2 0x1
-#define MX6Q_PAD_EIM_A17__GPIO2_IO21 0x0f0 0x404 0x000 0x5 0x0
-#define MX6Q_PAD_EIM_A17__SRC_BOOT_CFG17 0x0f0 0x404 0x000 0x7 0x0
-#define MX6Q_PAD_EIM_A16__EIM_ADDR16 0x0f4 0x408 0x000 0x0 0x0
-#define MX6Q_PAD_EIM_A16__IPU1_DI1_DISP_CLK 0x0f4 0x408 0x000 0x1 0x0
-#define MX6Q_PAD_EIM_A16__IPU2_CSI1_PIXCLK 0x0f4 0x408 0x8e0 0x2 0x1
-#define MX6Q_PAD_EIM_A16__GPIO2_IO22 0x0f4 0x408 0x000 0x5 0x0
-#define MX6Q_PAD_EIM_A16__SRC_BOOT_CFG16 0x0f4 0x408 0x000 0x7 0x0
-#define MX6Q_PAD_EIM_CS0__EIM_CS0_B 0x0f8 0x40c 0x000 0x0 0x0
-#define MX6Q_PAD_EIM_CS0__IPU1_DI1_PIN05 0x0f8 0x40c 0x000 0x1 0x0
-#define MX6Q_PAD_EIM_CS0__ECSPI2_SCLK 0x0f8 0x40c 0x810 0x2 0x0
-#define MX6Q_PAD_EIM_CS0__GPIO2_IO23 0x0f8 0x40c 0x000 0x5 0x0
-#define MX6Q_PAD_EIM_CS1__EIM_CS1_B 0x0fc 0x410 0x000 0x0 0x0
-#define MX6Q_PAD_EIM_CS1__IPU1_DI1_PIN06 0x0fc 0x410 0x000 0x1 0x0
-#define MX6Q_PAD_EIM_CS1__ECSPI2_MOSI 0x0fc 0x410 0x818 0x2 0x0
-#define MX6Q_PAD_EIM_CS1__GPIO2_IO24 0x0fc 0x410 0x000 0x5 0x0
-#define MX6Q_PAD_EIM_OE__EIM_OE_B 0x100 0x414 0x000 0x0 0x0
-#define MX6Q_PAD_EIM_OE__IPU1_DI1_PIN07 0x100 0x414 0x000 0x1 0x0
-#define MX6Q_PAD_EIM_OE__ECSPI2_MISO 0x100 0x414 0x814 0x2 0x0
-#define MX6Q_PAD_EIM_OE__GPIO2_IO25 0x100 0x414 0x000 0x5 0x0
-#define MX6Q_PAD_EIM_RW__EIM_RW 0x104 0x418 0x000 0x0 0x0
-#define MX6Q_PAD_EIM_RW__IPU1_DI1_PIN08 0x104 0x418 0x000 0x1 0x0
-#define MX6Q_PAD_EIM_RW__ECSPI2_SS0 0x104 0x418 0x81c 0x2 0x0
-#define MX6Q_PAD_EIM_RW__GPIO2_IO26 0x104 0x418 0x000 0x5 0x0
-#define MX6Q_PAD_EIM_RW__SRC_BOOT_CFG29 0x104 0x418 0x000 0x7 0x0
-#define MX6Q_PAD_EIM_LBA__EIM_LBA_B 0x108 0x41c 0x000 0x0 0x0
-#define MX6Q_PAD_EIM_LBA__IPU1_DI1_PIN17 0x108 0x41c 0x000 0x1 0x0
-#define MX6Q_PAD_EIM_LBA__ECSPI2_SS1 0x108 0x41c 0x820 0x2 0x0
-#define MX6Q_PAD_EIM_LBA__GPIO2_IO27 0x108 0x41c 0x000 0x5 0x0
-#define MX6Q_PAD_EIM_LBA__SRC_BOOT_CFG26 0x108 0x41c 0x000 0x7 0x0
-#define MX6Q_PAD_EIM_EB0__EIM_EB0_B 0x10c 0x420 0x000 0x0 0x0
-#define MX6Q_PAD_EIM_EB0__IPU1_DISP1_DATA11 0x10c 0x420 0x000 0x1 0x0
-#define MX6Q_PAD_EIM_EB0__IPU2_CSI1_DATA11 0x10c 0x420 0x8b4 0x2 0x1
-#define MX6Q_PAD_EIM_EB0__CCM_PMIC_READY 0x10c 0x420 0x7f0 0x4 0x0
-#define MX6Q_PAD_EIM_EB0__GPIO2_IO28 0x10c 0x420 0x000 0x5 0x0
-#define MX6Q_PAD_EIM_EB0__SRC_BOOT_CFG27 0x10c 0x420 0x000 0x7 0x0
-#define MX6Q_PAD_EIM_EB1__EIM_EB1_B 0x110 0x424 0x000 0x0 0x0
-#define MX6Q_PAD_EIM_EB1__IPU1_DISP1_DATA10 0x110 0x424 0x000 0x1 0x0
-#define MX6Q_PAD_EIM_EB1__IPU2_CSI1_DATA10 0x110 0x424 0x8b0 0x2 0x1
-#define MX6Q_PAD_EIM_EB1__GPIO2_IO29 0x110 0x424 0x000 0x5 0x0
-#define MX6Q_PAD_EIM_EB1__SRC_BOOT_CFG28 0x110 0x424 0x000 0x7 0x0
-#define MX6Q_PAD_EIM_DA0__EIM_AD00 0x114 0x428 0x000 0x0 0x0
-#define MX6Q_PAD_EIM_DA0__IPU1_DISP1_DATA09 0x114 0x428 0x000 0x1 0x0
-#define MX6Q_PAD_EIM_DA0__IPU2_CSI1_DATA09 0x114 0x428 0x000 0x2 0x0
-#define MX6Q_PAD_EIM_DA0__GPIO3_IO00 0x114 0x428 0x000 0x5 0x0
-#define MX6Q_PAD_EIM_DA0__SRC_BOOT_CFG00 0x114 0x428 0x000 0x7 0x0
-#define MX6Q_PAD_EIM_DA1__EIM_AD01 0x118 0x42c 0x000 0x0 0x0
-#define MX6Q_PAD_EIM_DA1__IPU1_DISP1_DATA08 0x118 0x42c 0x000 0x1 0x0
-#define MX6Q_PAD_EIM_DA1__IPU2_CSI1_DATA08 0x118 0x42c 0x000 0x2 0x0
-#define MX6Q_PAD_EIM_DA1__GPIO3_IO01 0x118 0x42c 0x000 0x5 0x0
-#define MX6Q_PAD_EIM_DA1__SRC_BOOT_CFG01 0x118 0x42c 0x000 0x7 0x0
-#define MX6Q_PAD_EIM_DA2__EIM_AD02 0x11c 0x430 0x000 0x0 0x0
-#define MX6Q_PAD_EIM_DA2__IPU1_DISP1_DATA07 0x11c 0x430 0x000 0x1 0x0
-#define MX6Q_PAD_EIM_DA2__IPU2_CSI1_DATA07 0x11c 0x430 0x000 0x2 0x0
-#define MX6Q_PAD_EIM_DA2__GPIO3_IO02 0x11c 0x430 0x000 0x5 0x0
-#define MX6Q_PAD_EIM_DA2__SRC_BOOT_CFG02 0x11c 0x430 0x000 0x7 0x0
-#define MX6Q_PAD_EIM_DA3__EIM_AD03 0x120 0x434 0x000 0x0 0x0
-#define MX6Q_PAD_EIM_DA3__IPU1_DISP1_DATA06 0x120 0x434 0x000 0x1 0x0
-#define MX6Q_PAD_EIM_DA3__IPU2_CSI1_DATA06 0x120 0x434 0x000 0x2 0x0
-#define MX6Q_PAD_EIM_DA3__GPIO3_IO03 0x120 0x434 0x000 0x5 0x0
-#define MX6Q_PAD_EIM_DA3__SRC_BOOT_CFG03 0x120 0x434 0x000 0x7 0x0
-#define MX6Q_PAD_EIM_DA4__EIM_AD04 0x124 0x438 0x000 0x0 0x0
-#define MX6Q_PAD_EIM_DA4__IPU1_DISP1_DATA05 0x124 0x438 0x000 0x1 0x0
-#define MX6Q_PAD_EIM_DA4__IPU2_CSI1_DATA05 0x124 0x438 0x000 0x2 0x0
-#define MX6Q_PAD_EIM_DA4__GPIO3_IO04 0x124 0x438 0x000 0x5 0x0
-#define MX6Q_PAD_EIM_DA4__SRC_BOOT_CFG04 0x124 0x438 0x000 0x7 0x0
-#define MX6Q_PAD_EIM_DA5__EIM_AD05 0x128 0x43c 0x000 0x0 0x0
-#define MX6Q_PAD_EIM_DA5__IPU1_DISP1_DATA04 0x128 0x43c 0x000 0x1 0x0
-#define MX6Q_PAD_EIM_DA5__IPU2_CSI1_DATA04 0x128 0x43c 0x000 0x2 0x0
-#define MX6Q_PAD_EIM_DA5__GPIO3_IO05 0x128 0x43c 0x000 0x5 0x0
-#define MX6Q_PAD_EIM_DA5__SRC_BOOT_CFG05 0x128 0x43c 0x000 0x7 0x0
-#define MX6Q_PAD_EIM_DA6__EIM_AD06 0x12c 0x440 0x000 0x0 0x0
-#define MX6Q_PAD_EIM_DA6__IPU1_DISP1_DATA03 0x12c 0x440 0x000 0x1 0x0
-#define MX6Q_PAD_EIM_DA6__IPU2_CSI1_DATA03 0x12c 0x440 0x000 0x2 0x0
-#define MX6Q_PAD_EIM_DA6__GPIO3_IO06 0x12c 0x440 0x000 0x5 0x0
-#define MX6Q_PAD_EIM_DA6__SRC_BOOT_CFG06 0x12c 0x440 0x000 0x7 0x0
-#define MX6Q_PAD_EIM_DA7__EIM_AD07 0x130 0x444 0x000 0x0 0x0
-#define MX6Q_PAD_EIM_DA7__IPU1_DISP1_DATA02 0x130 0x444 0x000 0x1 0x0
-#define MX6Q_PAD_EIM_DA7__IPU2_CSI1_DATA02 0x130 0x444 0x000 0x2 0x0
-#define MX6Q_PAD_EIM_DA7__GPIO3_IO07 0x130 0x444 0x000 0x5 0x0
-#define MX6Q_PAD_EIM_DA7__SRC_BOOT_CFG07 0x130 0x444 0x000 0x7 0x0
-#define MX6Q_PAD_EIM_DA8__EIM_AD08 0x134 0x448 0x000 0x0 0x0
-#define MX6Q_PAD_EIM_DA8__IPU1_DISP1_DATA01 0x134 0x448 0x000 0x1 0x0
-#define MX6Q_PAD_EIM_DA8__IPU2_CSI1_DATA01 0x134 0x448 0x000 0x2 0x0
-#define MX6Q_PAD_EIM_DA8__GPIO3_IO08 0x134 0x448 0x000 0x5 0x0
-#define MX6Q_PAD_EIM_DA8__SRC_BOOT_CFG08 0x134 0x448 0x000 0x7 0x0
-#define MX6Q_PAD_EIM_DA9__EIM_AD09 0x138 0x44c 0x000 0x0 0x0
-#define MX6Q_PAD_EIM_DA9__IPU1_DISP1_DATA00 0x138 0x44c 0x000 0x1 0x0
-#define MX6Q_PAD_EIM_DA9__IPU2_CSI1_DATA00 0x138 0x44c 0x000 0x2 0x0
-#define MX6Q_PAD_EIM_DA9__GPIO3_IO09 0x138 0x44c 0x000 0x5 0x0
-#define MX6Q_PAD_EIM_DA9__SRC_BOOT_CFG09 0x138 0x44c 0x000 0x7 0x0
-#define MX6Q_PAD_EIM_DA10__EIM_AD10 0x13c 0x450 0x000 0x0 0x0
-#define MX6Q_PAD_EIM_DA10__IPU1_DI1_PIN15 0x13c 0x450 0x000 0x1 0x0
-#define MX6Q_PAD_EIM_DA10__IPU2_CSI1_DATA_EN 0x13c 0x450 0x8d8 0x2 0x1
-#define MX6Q_PAD_EIM_DA10__GPIO3_IO10 0x13c 0x450 0x000 0x5 0x0
-#define MX6Q_PAD_EIM_DA10__SRC_BOOT_CFG10 0x13c 0x450 0x000 0x7 0x0
-#define MX6Q_PAD_EIM_DA11__EIM_AD11 0x140 0x454 0x000 0x0 0x0
-#define MX6Q_PAD_EIM_DA11__IPU1_DI1_PIN02 0x140 0x454 0x000 0x1 0x0
-#define MX6Q_PAD_EIM_DA11__IPU2_CSI1_HSYNC 0x140 0x454 0x8dc 0x2 0x1
-#define MX6Q_PAD_EIM_DA11__GPIO3_IO11 0x140 0x454 0x000 0x5 0x0
-#define MX6Q_PAD_EIM_DA11__SRC_BOOT_CFG11 0x140 0x454 0x000 0x7 0x0
-#define MX6Q_PAD_EIM_DA12__EIM_AD12 0x144 0x458 0x000 0x0 0x0
-#define MX6Q_PAD_EIM_DA12__IPU1_DI1_PIN03 0x144 0x458 0x000 0x1 0x0
-#define MX6Q_PAD_EIM_DA12__IPU2_CSI1_VSYNC 0x144 0x458 0x8e4 0x2 0x1
-#define MX6Q_PAD_EIM_DA12__GPIO3_IO12 0x144 0x458 0x000 0x5 0x0
-#define MX6Q_PAD_EIM_DA12__SRC_BOOT_CFG12 0x144 0x458 0x000 0x7 0x0
-#define MX6Q_PAD_EIM_DA13__EIM_AD13 0x148 0x45c 0x000 0x0 0x0
-#define MX6Q_PAD_EIM_DA13__IPU1_DI1_D0_CS 0x148 0x45c 0x000 0x1 0x0
-#define MX6Q_PAD_EIM_DA13__GPIO3_IO13 0x148 0x45c 0x000 0x5 0x0
-#define MX6Q_PAD_EIM_DA13__SRC_BOOT_CFG13 0x148 0x45c 0x000 0x7 0x0
-#define MX6Q_PAD_EIM_DA14__EIM_AD14 0x14c 0x460 0x000 0x0 0x0
-#define MX6Q_PAD_EIM_DA14__IPU1_DI1_D1_CS 0x14c 0x460 0x000 0x1 0x0
-#define MX6Q_PAD_EIM_DA14__GPIO3_IO14 0x14c 0x460 0x000 0x5 0x0
-#define MX6Q_PAD_EIM_DA14__SRC_BOOT_CFG14 0x14c 0x460 0x000 0x7 0x0
-#define MX6Q_PAD_EIM_DA15__EIM_AD15 0x150 0x464 0x000 0x0 0x0
-#define MX6Q_PAD_EIM_DA15__IPU1_DI1_PIN01 0x150 0x464 0x000 0x1 0x0
-#define MX6Q_PAD_EIM_DA15__IPU1_DI1_PIN04 0x150 0x464 0x000 0x2 0x0
-#define MX6Q_PAD_EIM_DA15__GPIO3_IO15 0x150 0x464 0x000 0x5 0x0
-#define MX6Q_PAD_EIM_DA15__SRC_BOOT_CFG15 0x150 0x464 0x000 0x7 0x0
-#define MX6Q_PAD_EIM_WAIT__EIM_WAIT_B 0x154 0x468 0x000 0x0 0x0
-#define MX6Q_PAD_EIM_WAIT__EIM_DTACK_B 0x154 0x468 0x000 0x1 0x0
-#define MX6Q_PAD_EIM_WAIT__GPIO5_IO00 0x154 0x468 0x000 0x5 0x0
-#define MX6Q_PAD_EIM_WAIT__SRC_BOOT_CFG25 0x154 0x468 0x000 0x7 0x0
-#define MX6Q_PAD_EIM_BCLK__EIM_BCLK 0x158 0x46c 0x000 0x0 0x0
-#define MX6Q_PAD_EIM_BCLK__IPU1_DI1_PIN16 0x158 0x46c 0x000 0x1 0x0
-#define MX6Q_PAD_EIM_BCLK__GPIO6_IO31 0x158 0x46c 0x000 0x5 0x0
-#define MX6Q_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x15c 0x470 0x000 0x0 0x0
-#define MX6Q_PAD_DI0_DISP_CLK__IPU2_DI0_DISP_CLK 0x15c 0x470 0x000 0x1 0x0
-#define MX6Q_PAD_DI0_DISP_CLK__GPIO4_IO16 0x15c 0x470 0x000 0x5 0x0
-#define MX6Q_PAD_DI0_PIN15__IPU1_DI0_PIN15 0x160 0x474 0x000 0x0 0x0
-#define MX6Q_PAD_DI0_PIN15__IPU2_DI0_PIN15 0x160 0x474 0x000 0x1 0x0
-#define MX6Q_PAD_DI0_PIN15__AUD6_TXC 0x160 0x474 0x000 0x2 0x0
-#define MX6Q_PAD_DI0_PIN15__GPIO4_IO17 0x160 0x474 0x000 0x5 0x0
-#define MX6Q_PAD_DI0_PIN2__IPU1_DI0_PIN02 0x164 0x478 0x000 0x0 0x0
-#define MX6Q_PAD_DI0_PIN2__IPU2_DI0_PIN02 0x164 0x478 0x000 0x1 0x0
-#define MX6Q_PAD_DI0_PIN2__AUD6_TXD 0x164 0x478 0x000 0x2 0x0
-#define MX6Q_PAD_DI0_PIN2__GPIO4_IO18 0x164 0x478 0x000 0x5 0x0
-#define MX6Q_PAD_DI0_PIN3__IPU1_DI0_PIN03 0x168 0x47c 0x000 0x0 0x0
-#define MX6Q_PAD_DI0_PIN3__IPU2_DI0_PIN03 0x168 0x47c 0x000 0x1 0x0
-#define MX6Q_PAD_DI0_PIN3__AUD6_TXFS 0x168 0x47c 0x000 0x2 0x0
-#define MX6Q_PAD_DI0_PIN3__GPIO4_IO19 0x168 0x47c 0x000 0x5 0x0
-#define MX6Q_PAD_DI0_PIN4__IPU1_DI0_PIN04 0x16c 0x480 0x000 0x0 0x0
-#define MX6Q_PAD_DI0_PIN4__IPU2_DI0_PIN04 0x16c 0x480 0x000 0x1 0x0
-#define MX6Q_PAD_DI0_PIN4__AUD6_RXD 0x16c 0x480 0x000 0x2 0x0
-#define MX6Q_PAD_DI0_PIN4__SD1_WP 0x16c 0x480 0x94c 0x3 0x0
-#define MX6Q_PAD_DI0_PIN4__GPIO4_IO20 0x16c 0x480 0x000 0x5 0x0
-#define MX6Q_PAD_DISP0_DAT0__IPU1_DISP0_DATA00 0x170 0x484 0x000 0x0 0x0
-#define MX6Q_PAD_DISP0_DAT0__IPU2_DISP0_DATA00 0x170 0x484 0x000 0x1 0x0
-#define MX6Q_PAD_DISP0_DAT0__ECSPI3_SCLK 0x170 0x484 0x000 0x2 0x0
-#define MX6Q_PAD_DISP0_DAT0__GPIO4_IO21 0x170 0x484 0x000 0x5 0x0
-#define MX6Q_PAD_DISP0_DAT1__IPU1_DISP0_DATA01 0x174 0x488 0x000 0x0 0x0
-#define MX6Q_PAD_DISP0_DAT1__IPU2_DISP0_DATA01 0x174 0x488 0x000 0x1 0x0
-#define MX6Q_PAD_DISP0_DAT1__ECSPI3_MOSI 0x174 0x488 0x000 0x2 0x0
-#define MX6Q_PAD_DISP0_DAT1__GPIO4_IO22 0x174 0x488 0x000 0x5 0x0
-#define MX6Q_PAD_DISP0_DAT2__IPU1_DISP0_DATA02 0x178 0x48c 0x000 0x0 0x0
-#define MX6Q_PAD_DISP0_DAT2__IPU2_DISP0_DATA02 0x178 0x48c 0x000 0x1 0x0
-#define MX6Q_PAD_DISP0_DAT2__ECSPI3_MISO 0x178 0x48c 0x000 0x2 0x0
-#define MX6Q_PAD_DISP0_DAT2__GPIO4_IO23 0x178 0x48c 0x000 0x5 0x0
-#define MX6Q_PAD_DISP0_DAT3__IPU1_DISP0_DATA03 0x17c 0x490 0x000 0x0 0x0
-#define MX6Q_PAD_DISP0_DAT3__IPU2_DISP0_DATA03 0x17c 0x490 0x000 0x1 0x0
-#define MX6Q_PAD_DISP0_DAT3__ECSPI3_SS0 0x17c 0x490 0x000 0x2 0x0
-#define MX6Q_PAD_DISP0_DAT3__GPIO4_IO24 0x17c 0x490 0x000 0x5 0x0
-#define MX6Q_PAD_DISP0_DAT4__IPU1_DISP0_DATA04 0x180 0x494 0x000 0x0 0x0
-#define MX6Q_PAD_DISP0_DAT4__IPU2_DISP0_DATA04 0x180 0x494 0x000 0x1 0x0
-#define MX6Q_PAD_DISP0_DAT4__ECSPI3_SS1 0x180 0x494 0x000 0x2 0x0
-#define MX6Q_PAD_DISP0_DAT4__GPIO4_IO25 0x180 0x494 0x000 0x5 0x0
-#define MX6Q_PAD_DISP0_DAT5__IPU1_DISP0_DATA05 0x184 0x498 0x000 0x0 0x0
-#define MX6Q_PAD_DISP0_DAT5__IPU2_DISP0_DATA05 0x184 0x498 0x000 0x1 0x0
-#define MX6Q_PAD_DISP0_DAT5__ECSPI3_SS2 0x184 0x498 0x000 0x2 0x0
-#define MX6Q_PAD_DISP0_DAT5__AUD6_RXFS 0x184 0x498 0x000 0x3 0x0
-#define MX6Q_PAD_DISP0_DAT5__GPIO4_IO26 0x184 0x498 0x000 0x5 0x0
-#define MX6Q_PAD_DISP0_DAT6__IPU1_DISP0_DATA06 0x188 0x49c 0x000 0x0 0x0
-#define MX6Q_PAD_DISP0_DAT6__IPU2_DISP0_DATA06 0x188 0x49c 0x000 0x1 0x0
-#define MX6Q_PAD_DISP0_DAT6__ECSPI3_SS3 0x188 0x49c 0x000 0x2 0x0
-#define MX6Q_PAD_DISP0_DAT6__AUD6_RXC 0x188 0x49c 0x000 0x3 0x0
-#define MX6Q_PAD_DISP0_DAT6__GPIO4_IO27 0x188 0x49c 0x000 0x5 0x0
-#define MX6Q_PAD_DISP0_DAT7__IPU1_DISP0_DATA07 0x18c 0x4a0 0x000 0x0 0x0
-#define MX6Q_PAD_DISP0_DAT7__IPU2_DISP0_DATA07 0x18c 0x4a0 0x000 0x1 0x0
-#define MX6Q_PAD_DISP0_DAT7__ECSPI3_RDY 0x18c 0x4a0 0x000 0x2 0x0
-#define MX6Q_PAD_DISP0_DAT7__GPIO4_IO28 0x18c 0x4a0 0x000 0x5 0x0
-#define MX6Q_PAD_DISP0_DAT8__IPU1_DISP0_DATA08 0x190 0x4a4 0x000 0x0 0x0
-#define MX6Q_PAD_DISP0_DAT8__IPU2_DISP0_DATA08 0x190 0x4a4 0x000 0x1 0x0
-#define MX6Q_PAD_DISP0_DAT8__PWM1_OUT 0x190 0x4a4 0x000 0x2 0x0
-#define MX6Q_PAD_DISP0_DAT8__WDOG1_B 0x190 0x4a4 0x000 0x3 0x0
-#define MX6Q_PAD_DISP0_DAT8__GPIO4_IO29 0x190 0x4a4 0x000 0x5 0x0
-#define MX6Q_PAD_DISP0_DAT9__IPU1_DISP0_DATA09 0x194 0x4a8 0x000 0x0 0x0
-#define MX6Q_PAD_DISP0_DAT9__IPU2_DISP0_DATA09 0x194 0x4a8 0x000 0x1 0x0
-#define MX6Q_PAD_DISP0_DAT9__PWM2_OUT 0x194 0x4a8 0x000 0x2 0x0
-#define MX6Q_PAD_DISP0_DAT9__WDOG2_B 0x194 0x4a8 0x000 0x3 0x0
-#define MX6Q_PAD_DISP0_DAT9__GPIO4_IO30 0x194 0x4a8 0x000 0x5 0x0
-#define MX6Q_PAD_DISP0_DAT10__IPU1_DISP0_DATA10 0x198 0x4ac 0x000 0x0 0x0
-#define MX6Q_PAD_DISP0_DAT10__IPU2_DISP0_DATA10 0x198 0x4ac 0x000 0x1 0x0
-#define MX6Q_PAD_DISP0_DAT10__GPIO4_IO31 0x198 0x4ac 0x000 0x5 0x0
-#define MX6Q_PAD_DISP0_DAT11__IPU1_DISP0_DATA11 0x19c 0x4b0 0x000 0x0 0x0
-#define MX6Q_PAD_DISP0_DAT11__IPU2_DISP0_DATA11 0x19c 0x4b0 0x000 0x1 0x0
-#define MX6Q_PAD_DISP0_DAT11__GPIO5_IO05 0x19c 0x4b0 0x000 0x5 0x0
-#define MX6Q_PAD_DISP0_DAT12__IPU1_DISP0_DATA12 0x1a0 0x4b4 0x000 0x0 0x0
-#define MX6Q_PAD_DISP0_DAT12__IPU2_DISP0_DATA12 0x1a0 0x4b4 0x000 0x1 0x0
-#define MX6Q_PAD_DISP0_DAT12__GPIO5_IO06 0x1a0 0x4b4 0x000 0x5 0x0
-#define MX6Q_PAD_DISP0_DAT13__IPU1_DISP0_DATA13 0x1a4 0x4b8 0x000 0x0 0x0
-#define MX6Q_PAD_DISP0_DAT13__IPU2_DISP0_DATA13 0x1a4 0x4b8 0x000 0x1 0x0
-#define MX6Q_PAD_DISP0_DAT13__AUD5_RXFS 0x1a4 0x4b8 0x7d8 0x3 0x1
-#define MX6Q_PAD_DISP0_DAT13__GPIO5_IO07 0x1a4 0x4b8 0x000 0x5 0x0
-#define MX6Q_PAD_DISP0_DAT14__IPU1_DISP0_DATA14 0x1a8 0x4bc 0x000 0x0 0x0
-#define MX6Q_PAD_DISP0_DAT14__IPU2_DISP0_DATA14 0x1a8 0x4bc 0x000 0x1 0x0
-#define MX6Q_PAD_DISP0_DAT14__AUD5_RXC 0x1a8 0x4bc 0x7d4 0x3 0x1
-#define MX6Q_PAD_DISP0_DAT14__GPIO5_IO08 0x1a8 0x4bc 0x000 0x5 0x0
-#define MX6Q_PAD_DISP0_DAT15__IPU1_DISP0_DATA15 0x1ac 0x4c0 0x000 0x0 0x0
-#define MX6Q_PAD_DISP0_DAT15__IPU2_DISP0_DATA15 0x1ac 0x4c0 0x000 0x1 0x0
-#define MX6Q_PAD_DISP0_DAT15__ECSPI1_SS1 0x1ac 0x4c0 0x804 0x2 0x1
-#define MX6Q_PAD_DISP0_DAT15__ECSPI2_SS1 0x1ac 0x4c0 0x820 0x3 0x1
-#define MX6Q_PAD_DISP0_DAT15__GPIO5_IO09 0x1ac 0x4c0 0x000 0x5 0x0
-#define MX6Q_PAD_DISP0_DAT16__IPU1_DISP0_DATA16 0x1b0 0x4c4 0x000 0x0 0x0
-#define MX6Q_PAD_DISP0_DAT16__IPU2_DISP0_DATA16 0x1b0 0x4c4 0x000 0x1 0x0
-#define MX6Q_PAD_DISP0_DAT16__ECSPI2_MOSI 0x1b0 0x4c4 0x818 0x2 0x1
-#define MX6Q_PAD_DISP0_DAT16__AUD5_TXC 0x1b0 0x4c4 0x7dc 0x3 0x0
-#define MX6Q_PAD_DISP0_DAT16__SDMA_EXT_EVENT0 0x1b0 0x4c4 0x90c 0x4 0x0
-#define MX6Q_PAD_DISP0_DAT16__GPIO5_IO10 0x1b0 0x4c4 0x000 0x5 0x0
-#define MX6Q_PAD_DISP0_DAT17__IPU1_DISP0_DATA17 0x1b4 0x4c8 0x000 0x0 0x0
-#define MX6Q_PAD_DISP0_DAT17__IPU2_DISP0_DATA17 0x1b4 0x4c8 0x000 0x1 0x0
-#define MX6Q_PAD_DISP0_DAT17__ECSPI2_MISO 0x1b4 0x4c8 0x814 0x2 0x1
-#define MX6Q_PAD_DISP0_DAT17__AUD5_TXD 0x1b4 0x4c8 0x7d0 0x3 0x0
-#define MX6Q_PAD_DISP0_DAT17__SDMA_EXT_EVENT1 0x1b4 0x4c8 0x910 0x4 0x0
-#define MX6Q_PAD_DISP0_DAT17__GPIO5_IO11 0x1b4 0x4c8 0x000 0x5 0x0
-#define MX6Q_PAD_DISP0_DAT18__IPU1_DISP0_DATA18 0x1b8 0x4cc 0x000 0x0 0x0
-#define MX6Q_PAD_DISP0_DAT18__IPU2_DISP0_DATA18 0x1b8 0x4cc 0x000 0x1 0x0
-#define MX6Q_PAD_DISP0_DAT18__ECSPI2_SS0 0x1b8 0x4cc 0x81c 0x2 0x1
-#define MX6Q_PAD_DISP0_DAT18__AUD5_TXFS 0x1b8 0x4cc 0x7e0 0x3 0x0
-#define MX6Q_PAD_DISP0_DAT18__AUD4_RXFS 0x1b8 0x4cc 0x7c0 0x4 0x0
-#define MX6Q_PAD_DISP0_DAT18__GPIO5_IO12 0x1b8 0x4cc 0x000 0x5 0x0
-#define MX6Q_PAD_DISP0_DAT18__EIM_CS2_B 0x1b8 0x4cc 0x000 0x7 0x0
-#define MX6Q_PAD_DISP0_DAT19__IPU1_DISP0_DATA19 0x1bc 0x4d0 0x000 0x0 0x0
-#define MX6Q_PAD_DISP0_DAT19__IPU2_DISP0_DATA19 0x1bc 0x4d0 0x000 0x1 0x0
-#define MX6Q_PAD_DISP0_DAT19__ECSPI2_SCLK 0x1bc 0x4d0 0x810 0x2 0x1
-#define MX6Q_PAD_DISP0_DAT19__AUD5_RXD 0x1bc 0x4d0 0x7cc 0x3 0x0
-#define MX6Q_PAD_DISP0_DAT19__AUD4_RXC 0x1bc 0x4d0 0x7bc 0x4 0x0
-#define MX6Q_PAD_DISP0_DAT19__GPIO5_IO13 0x1bc 0x4d0 0x000 0x5 0x0
-#define MX6Q_PAD_DISP0_DAT19__EIM_CS3_B 0x1bc 0x4d0 0x000 0x7 0x0
-#define MX6Q_PAD_DISP0_DAT20__IPU1_DISP0_DATA20 0x1c0 0x4d4 0x000 0x0 0x0
-#define MX6Q_PAD_DISP0_DAT20__IPU2_DISP0_DATA20 0x1c0 0x4d4 0x000 0x1 0x0
-#define MX6Q_PAD_DISP0_DAT20__ECSPI1_SCLK 0x1c0 0x4d4 0x7f4 0x2 0x1
-#define MX6Q_PAD_DISP0_DAT20__AUD4_TXC 0x1c0 0x4d4 0x7c4 0x3 0x0
-#define MX6Q_PAD_DISP0_DAT20__GPIO5_IO14 0x1c0 0x4d4 0x000 0x5 0x0
-#define MX6Q_PAD_DISP0_DAT21__IPU1_DISP0_DATA21 0x1c4 0x4d8 0x000 0x0 0x0
-#define MX6Q_PAD_DISP0_DAT21__IPU2_DISP0_DATA21 0x1c4 0x4d8 0x000 0x1 0x0
-#define MX6Q_PAD_DISP0_DAT21__ECSPI1_MOSI 0x1c4 0x4d8 0x7fc 0x2 0x1
-#define MX6Q_PAD_DISP0_DAT21__AUD4_TXD 0x1c4 0x4d8 0x7b8 0x3 0x1
-#define MX6Q_PAD_DISP0_DAT21__GPIO5_IO15 0x1c4 0x4d8 0x000 0x5 0x0
-#define MX6Q_PAD_DISP0_DAT22__IPU1_DISP0_DATA22 0x1c8 0x4dc 0x000 0x0 0x0
-#define MX6Q_PAD_DISP0_DAT22__IPU2_DISP0_DATA22 0x1c8 0x4dc 0x000 0x1 0x0
-#define MX6Q_PAD_DISP0_DAT22__ECSPI1_MISO 0x1c8 0x4dc 0x7f8 0x2 0x1
-#define MX6Q_PAD_DISP0_DAT22__AUD4_TXFS 0x1c8 0x4dc 0x7c8 0x3 0x1
-#define MX6Q_PAD_DISP0_DAT22__GPIO5_IO16 0x1c8 0x4dc 0x000 0x5 0x0
-#define MX6Q_PAD_DISP0_DAT23__IPU1_DISP0_DATA23 0x1cc 0x4e0 0x000 0x0 0x0
-#define MX6Q_PAD_DISP0_DAT23__IPU2_DISP0_DATA23 0x1cc 0x4e0 0x000 0x1 0x0
-#define MX6Q_PAD_DISP0_DAT23__ECSPI1_SS0 0x1cc 0x4e0 0x800 0x2 0x1
-#define MX6Q_PAD_DISP0_DAT23__AUD4_RXD 0x1cc 0x4e0 0x7b4 0x3 0x1
-#define MX6Q_PAD_DISP0_DAT23__GPIO5_IO17 0x1cc 0x4e0 0x000 0x5 0x0
-#define MX6Q_PAD_ENET_MDIO__ENET_MDIO 0x1d0 0x4e4 0x840 0x1 0x0
-#define MX6Q_PAD_ENET_MDIO__ESAI_RX_CLK 0x1d0 0x4e4 0x86c 0x2 0x0
-#define MX6Q_PAD_ENET_MDIO__ENET_1588_EVENT1_OUT 0x1d0 0x4e4 0x000 0x4 0x0
-#define MX6Q_PAD_ENET_MDIO__GPIO1_IO22 0x1d0 0x4e4 0x000 0x5 0x0
-#define MX6Q_PAD_ENET_MDIO__SPDIF_LOCK 0x1d0 0x4e4 0x000 0x6 0x0
-#define MX6Q_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1d4 0x4e8 0x000 0x1 0x0
-#define MX6Q_PAD_ENET_REF_CLK__ESAI_RX_FS 0x1d4 0x4e8 0x85c 0x2 0x0
-#define MX6Q_PAD_ENET_REF_CLK__GPIO1_IO23 0x1d4 0x4e8 0x000 0x5 0x0
-#define MX6Q_PAD_ENET_REF_CLK__SPDIF_SR_CLK 0x1d4 0x4e8 0x000 0x6 0x0
-#define MX6Q_PAD_ENET_RX_ER__USB_OTG_ID 0x1d8 0x4ec 0x000 0x0 0x0
-#define MX6Q_PAD_ENET_RX_ER__ENET_RX_ER 0x1d8 0x4ec 0x000 0x1 0x0
-#define MX6Q_PAD_ENET_RX_ER__ESAI_RX_HF_CLK 0x1d8 0x4ec 0x864 0x2 0x0
-#define MX6Q_PAD_ENET_RX_ER__SPDIF_IN 0x1d8 0x4ec 0x914 0x3 0x1
-#define MX6Q_PAD_ENET_RX_ER__ENET_1588_EVENT2_OUT 0x1d8 0x4ec 0x000 0x4 0x0
-#define MX6Q_PAD_ENET_RX_ER__GPIO1_IO24 0x1d8 0x4ec 0x000 0x5 0x0
-#define MX6Q_PAD_ENET_CRS_DV__ENET_RX_EN 0x1dc 0x4f0 0x858 0x1 0x1
-#define MX6Q_PAD_ENET_CRS_DV__ESAI_TX_CLK 0x1dc 0x4f0 0x870 0x2 0x0
-#define MX6Q_PAD_ENET_CRS_DV__SPDIF_EXT_CLK 0x1dc 0x4f0 0x918 0x3 0x1
-#define MX6Q_PAD_ENET_CRS_DV__GPIO1_IO25 0x1dc 0x4f0 0x000 0x5 0x0
-#define MX6Q_PAD_ENET_RXD1__MLB_SIG 0x1e0 0x4f4 0x908 0x0 0x0
-#define MX6Q_PAD_ENET_RXD1__ENET_RX_DATA1 0x1e0 0x4f4 0x84c 0x1 0x1
-#define MX6Q_PAD_ENET_RXD1__ESAI_TX_FS 0x1e0 0x4f4 0x860 0x2 0x0
-#define MX6Q_PAD_ENET_RXD1__ENET_1588_EVENT3_OUT 0x1e0 0x4f4 0x000 0x4 0x0
-#define MX6Q_PAD_ENET_RXD1__GPIO1_IO26 0x1e0 0x4f4 0x000 0x5 0x0
-#define MX6Q_PAD_ENET_RXD0__ENET_RX_DATA0 0x1e4 0x4f8 0x848 0x1 0x1
-#define MX6Q_PAD_ENET_RXD0__ESAI_TX_HF_CLK 0x1e4 0x4f8 0x868 0x2 0x0
-#define MX6Q_PAD_ENET_RXD0__SPDIF_OUT 0x1e4 0x4f8 0x000 0x3 0x0
-#define MX6Q_PAD_ENET_RXD0__GPIO1_IO27 0x1e4 0x4f8 0x000 0x5 0x0
-#define MX6Q_PAD_ENET_TX_EN__ENET_TX_EN 0x1e8 0x4fc 0x000 0x1 0x0
-#define MX6Q_PAD_ENET_TX_EN__ESAI_TX3_RX2 0x1e8 0x4fc 0x880 0x2 0x0
-#define MX6Q_PAD_ENET_TX_EN__GPIO1_IO28 0x1e8 0x4fc 0x000 0x5 0x0
-#define MX6Q_PAD_ENET_TXD1__MLB_CLK 0x1ec 0x500 0x900 0x0 0x0
-#define MX6Q_PAD_ENET_TXD1__ENET_TX_DATA1 0x1ec 0x500 0x000 0x1 0x0
-#define MX6Q_PAD_ENET_TXD1__ESAI_TX2_RX3 0x1ec 0x500 0x87c 0x2 0x0
-#define MX6Q_PAD_ENET_TXD1__ENET_1588_EVENT0_IN 0x1ec 0x500 0x000 0x4 0x0
-#define MX6Q_PAD_ENET_TXD1__GPIO1_IO29 0x1ec 0x500 0x000 0x5 0x0
-#define MX6Q_PAD_ENET_TXD0__ENET_TX_DATA0 0x1f0 0x504 0x000 0x1 0x0
-#define MX6Q_PAD_ENET_TXD0__ESAI_TX4_RX1 0x1f0 0x504 0x884 0x2 0x0
-#define MX6Q_PAD_ENET_TXD0__GPIO1_IO30 0x1f0 0x504 0x000 0x5 0x0
-#define MX6Q_PAD_ENET_MDC__MLB_DATA 0x1f4 0x508 0x904 0x0 0x0
-#define MX6Q_PAD_ENET_MDC__ENET_MDC 0x1f4 0x508 0x000 0x1 0x0
-#define MX6Q_PAD_ENET_MDC__ESAI_TX5_RX0 0x1f4 0x508 0x888 0x2 0x0
-#define MX6Q_PAD_ENET_MDC__ENET_1588_EVENT1_IN 0x1f4 0x508 0x000 0x4 0x0
-#define MX6Q_PAD_ENET_MDC__GPIO1_IO31 0x1f4 0x508 0x000 0x5 0x0
-#define MX6Q_PAD_KEY_COL0__ECSPI1_SCLK 0x1f8 0x5c8 0x7f4 0x0 0x2
-#define MX6Q_PAD_KEY_COL0__ENET_RX_DATA3 0x1f8 0x5c8 0x854 0x1 0x1
-#define MX6Q_PAD_KEY_COL0__AUD5_TXC 0x1f8 0x5c8 0x7dc 0x2 0x1
-#define MX6Q_PAD_KEY_COL0__KEY_COL0 0x1f8 0x5c8 0x000 0x3 0x0
-#define MX6Q_PAD_KEY_COL0__UART4_TX_DATA 0x1f8 0x5c8 0x000 0x4 0x0
-#define MX6Q_PAD_KEY_COL0__UART4_RX_DATA 0x1f8 0x5c8 0x938 0x4 0x0
-#define MX6Q_PAD_KEY_COL0__GPIO4_IO06 0x1f8 0x5c8 0x000 0x5 0x0
-#define MX6Q_PAD_KEY_COL0__DCIC1_OUT 0x1f8 0x5c8 0x000 0x6 0x0
-#define MX6Q_PAD_KEY_ROW0__ECSPI1_MOSI 0x1fc 0x5cc 0x7fc 0x0 0x2
-#define MX6Q_PAD_KEY_ROW0__ENET_TX_DATA3 0x1fc 0x5cc 0x000 0x1 0x0
-#define MX6Q_PAD_KEY_ROW0__AUD5_TXD 0x1fc 0x5cc 0x7d0 0x2 0x1
-#define MX6Q_PAD_KEY_ROW0__KEY_ROW0 0x1fc 0x5cc 0x000 0x3 0x0
-#define MX6Q_PAD_KEY_ROW0__UART4_RX_DATA 0x1fc 0x5cc 0x938 0x4 0x1
-#define MX6Q_PAD_KEY_ROW0__UART4_TX_DATA 0x1fc 0x5cc 0x000 0x4 0x0
-#define MX6Q_PAD_KEY_ROW0__GPIO4_IO07 0x1fc 0x5cc 0x000 0x5 0x0
-#define MX6Q_PAD_KEY_ROW0__DCIC2_OUT 0x1fc 0x5cc 0x000 0x6 0x0
-#define MX6Q_PAD_KEY_COL1__ECSPI1_MISO 0x200 0x5d0 0x7f8 0x0 0x2
-#define MX6Q_PAD_KEY_COL1__ENET_MDIO 0x200 0x5d0 0x840 0x1 0x1
-#define MX6Q_PAD_KEY_COL1__AUD5_TXFS 0x200 0x5d0 0x7e0 0x2 0x1
-#define MX6Q_PAD_KEY_COL1__KEY_COL1 0x200 0x5d0 0x000 0x3 0x0
-#define MX6Q_PAD_KEY_COL1__UART5_TX_DATA 0x200 0x5d0 0x000 0x4 0x0
-#define MX6Q_PAD_KEY_COL1__UART5_RX_DATA 0x200 0x5d0 0x940 0x4 0x0
-#define MX6Q_PAD_KEY_COL1__GPIO4_IO08 0x200 0x5d0 0x000 0x5 0x0
-#define MX6Q_PAD_KEY_COL1__SD1_VSELECT 0x200 0x5d0 0x000 0x6 0x0
-#define MX6Q_PAD_KEY_ROW1__ECSPI1_SS0 0x204 0x5d4 0x800 0x0 0x2
-#define MX6Q_PAD_KEY_ROW1__ENET_COL 0x204 0x5d4 0x000 0x1 0x0
-#define MX6Q_PAD_KEY_ROW1__AUD5_RXD 0x204 0x5d4 0x7cc 0x2 0x1
-#define MX6Q_PAD_KEY_ROW1__KEY_ROW1 0x204 0x5d4 0x000 0x3 0x0
-#define MX6Q_PAD_KEY_ROW1__UART5_RX_DATA 0x204 0x5d4 0x940 0x4 0x1
-#define MX6Q_PAD_KEY_ROW1__UART5_TX_DATA 0x204 0x5d4 0x000 0x4 0x0
-#define MX6Q_PAD_KEY_ROW1__GPIO4_IO09 0x204 0x5d4 0x000 0x5 0x0
-#define MX6Q_PAD_KEY_ROW1__SD2_VSELECT 0x204 0x5d4 0x000 0x6 0x0
-#define MX6Q_PAD_KEY_COL2__ECSPI1_SS1 0x208 0x5d8 0x804 0x0 0x2
-#define MX6Q_PAD_KEY_COL2__ENET_RX_DATA2 0x208 0x5d8 0x850 0x1 0x1
-#define MX6Q_PAD_KEY_COL2__FLEXCAN1_TX 0x208 0x5d8 0x000 0x2 0x0
-#define MX6Q_PAD_KEY_COL2__KEY_COL2 0x208 0x5d8 0x000 0x3 0x0
-#define MX6Q_PAD_KEY_COL2__ENET_MDC 0x208 0x5d8 0x000 0x4 0x0
-#define MX6Q_PAD_KEY_COL2__GPIO4_IO10 0x208 0x5d8 0x000 0x5 0x0
-#define MX6Q_PAD_KEY_COL2__USB_H1_PWR_CTL_WAKE 0x208 0x5d8 0x000 0x6 0x0
-#define MX6Q_PAD_KEY_ROW2__ECSPI1_SS2 0x20c 0x5dc 0x808 0x0 0x1
-#define MX6Q_PAD_KEY_ROW2__ENET_TX_DATA2 0x20c 0x5dc 0x000 0x1 0x0
-#define MX6Q_PAD_KEY_ROW2__FLEXCAN1_RX 0x20c 0x5dc 0x7e4 0x2 0x0
-#define MX6Q_PAD_KEY_ROW2__KEY_ROW2 0x20c 0x5dc 0x000 0x3 0x0
-#define MX6Q_PAD_KEY_ROW2__SD2_VSELECT 0x20c 0x5dc 0x000 0x4 0x0
-#define MX6Q_PAD_KEY_ROW2__GPIO4_IO11 0x20c 0x5dc 0x000 0x5 0x0
-#define MX6Q_PAD_KEY_ROW2__HDMI_TX_CEC_LINE 0x20c 0x5dc 0x88c 0x6 0x1
-#define MX6Q_PAD_KEY_COL3__ECSPI1_SS3 0x210 0x5e0 0x80c 0x0 0x1
-#define MX6Q_PAD_KEY_COL3__ENET_CRS 0x210 0x5e0 0x000 0x1 0x0
-#define MX6Q_PAD_KEY_COL3__HDMI_TX_DDC_SCL 0x210 0x5e0 0x890 0x2 0x1
-#define MX6Q_PAD_KEY_COL3__KEY_COL3 0x210 0x5e0 0x000 0x3 0x0
-#define MX6Q_PAD_KEY_COL3__I2C2_SCL 0x210 0x5e0 0x8a0 0x4 0x1
-#define MX6Q_PAD_KEY_COL3__GPIO4_IO12 0x210 0x5e0 0x000 0x5 0x0
-#define MX6Q_PAD_KEY_COL3__SPDIF_IN 0x210 0x5e0 0x914 0x6 0x2
-#define MX6Q_PAD_KEY_ROW3__ASRC_EXT_CLK 0x214 0x5e4 0x7b0 0x1 0x0
-#define MX6Q_PAD_KEY_ROW3__HDMI_TX_DDC_SDA 0x214 0x5e4 0x894 0x2 0x1
-#define MX6Q_PAD_KEY_ROW3__KEY_ROW3 0x214 0x5e4 0x000 0x3 0x0
-#define MX6Q_PAD_KEY_ROW3__I2C2_SDA 0x214 0x5e4 0x8a4 0x4 0x1
-#define MX6Q_PAD_KEY_ROW3__GPIO4_IO13 0x214 0x5e4 0x000 0x5 0x0
-#define MX6Q_PAD_KEY_ROW3__SD1_VSELECT 0x214 0x5e4 0x000 0x6 0x0
-#define MX6Q_PAD_KEY_COL4__FLEXCAN2_TX 0x218 0x5e8 0x000 0x0 0x0
-#define MX6Q_PAD_KEY_COL4__IPU1_SISG4 0x218 0x5e8 0x000 0x1 0x0
-#define MX6Q_PAD_KEY_COL4__USB_OTG_OC 0x218 0x5e8 0x944 0x2 0x1
-#define MX6Q_PAD_KEY_COL4__KEY_COL4 0x218 0x5e8 0x000 0x3 0x0
-#define MX6Q_PAD_KEY_COL4__UART5_RTS_B 0x218 0x5e8 0x93c 0x4 0x0
-#define MX6Q_PAD_KEY_COL4__UART5_CTS_B 0x218 0x5e8 0x000 0x4 0x0
-#define MX6Q_PAD_KEY_COL4__GPIO4_IO14 0x218 0x5e8 0x000 0x5 0x0
-#define MX6Q_PAD_KEY_ROW4__FLEXCAN2_RX 0x21c 0x5ec 0x7e8 0x0 0x0
-#define MX6Q_PAD_KEY_ROW4__IPU1_SISG5 0x21c 0x5ec 0x000 0x1 0x0
-#define MX6Q_PAD_KEY_ROW4__USB_OTG_PWR 0x21c 0x5ec 0x000 0x2 0x0
-#define MX6Q_PAD_KEY_ROW4__KEY_ROW4 0x21c 0x5ec 0x000 0x3 0x0
-#define MX6Q_PAD_KEY_ROW4__UART5_CTS_B 0x21c 0x5ec 0x000 0x4 0x0
-#define MX6Q_PAD_KEY_ROW4__UART5_RTS_B 0x21c 0x5ec 0x93c 0x4 0x1
-#define MX6Q_PAD_KEY_ROW4__GPIO4_IO15 0x21c 0x5ec 0x000 0x5 0x0
-#define MX6Q_PAD_GPIO_0__CCM_CLKO1 0x220 0x5f0 0x000 0x0 0x0
-#define MX6Q_PAD_GPIO_0__KEY_COL5 0x220 0x5f0 0x8e8 0x2 0x0
-#define MX6Q_PAD_GPIO_0__ASRC_EXT_CLK 0x220 0x5f0 0x7b0 0x3 0x1
-#define MX6Q_PAD_GPIO_0__EPIT1_OUT 0x220 0x5f0 0x000 0x4 0x0
-#define MX6Q_PAD_GPIO_0__GPIO1_IO00 0x220 0x5f0 0x000 0x5 0x0
-#define MX6Q_PAD_GPIO_0__USB_H1_PWR 0x220 0x5f0 0x000 0x6 0x0
-#define MX6Q_PAD_GPIO_0__SNVS_VIO_5 0x220 0x5f0 0x000 0x7 0x0
-#define MX6Q_PAD_GPIO_1__ESAI_RX_CLK 0x224 0x5f4 0x86c 0x0 0x1
-#define MX6Q_PAD_GPIO_1__WDOG2_B 0x224 0x5f4 0x000 0x1 0x0
-#define MX6Q_PAD_GPIO_1__KEY_ROW5 0x224 0x5f4 0x8f4 0x2 0x0
-#define MX6Q_PAD_GPIO_1__USB_OTG_ID 0x224 0x5f4 0x000 0x3 0x0
-#define MX6Q_PAD_GPIO_1__PWM2_OUT 0x224 0x5f4 0x000 0x4 0x0
-#define MX6Q_PAD_GPIO_1__GPIO1_IO01 0x224 0x5f4 0x000 0x5 0x0
-#define MX6Q_PAD_GPIO_1__SD1_CD_B 0x224 0x5f4 0x000 0x6 0x0
-#define MX6Q_PAD_GPIO_9__ESAI_RX_FS 0x228 0x5f8 0x85c 0x0 0x1
-#define MX6Q_PAD_GPIO_9__WDOG1_B 0x228 0x5f8 0x000 0x1 0x0
-#define MX6Q_PAD_GPIO_9__KEY_COL6 0x228 0x5f8 0x8ec 0x2 0x0
-#define MX6Q_PAD_GPIO_9__CCM_REF_EN_B 0x228 0x5f8 0x000 0x3 0x0
-#define MX6Q_PAD_GPIO_9__PWM1_OUT 0x228 0x5f8 0x000 0x4 0x0
-#define MX6Q_PAD_GPIO_9__GPIO1_IO09 0x228 0x5f8 0x000 0x5 0x0
-#define MX6Q_PAD_GPIO_9__SD1_WP 0x228 0x5f8 0x94c 0x6 0x1
-#define MX6Q_PAD_GPIO_3__ESAI_RX_HF_CLK 0x22c 0x5fc 0x864 0x0 0x1
-#define MX6Q_PAD_GPIO_3__I2C3_SCL 0x22c 0x5fc 0x8a8 0x2 0x1
-#define MX6Q_PAD_GPIO_3__XTALOSC_REF_CLK_24M 0x22c 0x5fc 0x000 0x3 0x0
-#define MX6Q_PAD_GPIO_3__CCM_CLKO2 0x22c 0x5fc 0x000 0x4 0x0
-#define MX6Q_PAD_GPIO_3__GPIO1_IO03 0x22c 0x5fc 0x000 0x5 0x0
-#define MX6Q_PAD_GPIO_3__USB_H1_OC 0x22c 0x5fc 0x948 0x6 0x1
-#define MX6Q_PAD_GPIO_3__MLB_CLK 0x22c 0x5fc 0x900 0x7 0x1
-#define MX6Q_PAD_GPIO_6__ESAI_TX_CLK 0x230 0x600 0x870 0x0 0x1
-#define MX6Q_PAD_GPIO_6__I2C3_SDA 0x230 0x600 0x8ac 0x2 0x1
-#define MX6Q_PAD_GPIO_6__GPIO1_IO06 0x230 0x600 0x000 0x5 0x0
-#define MX6Q_PAD_GPIO_6__SD2_LCTL 0x230 0x600 0x000 0x6 0x0
-#define MX6Q_PAD_GPIO_6__MLB_SIG 0x230 0x600 0x908 0x7 0x1
-#define MX6Q_PAD_GPIO_2__ESAI_TX_FS 0x234 0x604 0x860 0x0 0x1
-#define MX6Q_PAD_GPIO_2__KEY_ROW6 0x234 0x604 0x8f8 0x2 0x1
-#define MX6Q_PAD_GPIO_2__GPIO1_IO02 0x234 0x604 0x000 0x5 0x0
-#define MX6Q_PAD_GPIO_2__SD2_WP 0x234 0x604 0x000 0x6 0x0
-#define MX6Q_PAD_GPIO_2__MLB_DATA 0x234 0x604 0x904 0x7 0x1
-#define MX6Q_PAD_GPIO_4__ESAI_TX_HF_CLK 0x238 0x608 0x868 0x0 0x1
-#define MX6Q_PAD_GPIO_4__KEY_COL7 0x238 0x608 0x8f0 0x2 0x1
-#define MX6Q_PAD_GPIO_4__GPIO1_IO04 0x238 0x608 0x000 0x5 0x0
-#define MX6Q_PAD_GPIO_4__SD2_CD_B 0x238 0x608 0x000 0x6 0x0
-#define MX6Q_PAD_GPIO_5__ESAI_TX2_RX3 0x23c 0x60c 0x87c 0x0 0x1
-#define MX6Q_PAD_GPIO_5__KEY_ROW7 0x23c 0x60c 0x8fc 0x2 0x1
-#define MX6Q_PAD_GPIO_5__CCM_CLKO1 0x23c 0x60c 0x000 0x3 0x0
-#define MX6Q_PAD_GPIO_5__GPIO1_IO05 0x23c 0x60c 0x000 0x5 0x0
-#define MX6Q_PAD_GPIO_5__I2C3_SCL 0x23c 0x60c 0x8a8 0x6 0x2
-#define MX6Q_PAD_GPIO_5__ARM_EVENTI 0x23c 0x60c 0x000 0x7 0x0
-#define MX6Q_PAD_GPIO_7__ESAI_TX4_RX1 0x240 0x610 0x884 0x0 0x1
-#define MX6Q_PAD_GPIO_7__ECSPI5_RDY 0x240 0x610 0x000 0x1 0x0
-#define MX6Q_PAD_GPIO_7__EPIT1_OUT 0x240 0x610 0x000 0x2 0x0
-#define MX6Q_PAD_GPIO_7__FLEXCAN1_TX 0x240 0x610 0x000 0x3 0x0
-#define MX6Q_PAD_GPIO_7__UART2_TX_DATA 0x240 0x610 0x000 0x4 0x0
-#define MX6Q_PAD_GPIO_7__UART2_RX_DATA 0x240 0x610 0x928 0x4 0x2
-#define MX6Q_PAD_GPIO_7__GPIO1_IO07 0x240 0x610 0x000 0x5 0x0
-#define MX6Q_PAD_GPIO_7__SPDIF_LOCK 0x240 0x610 0x000 0x6 0x0
-#define MX6Q_PAD_GPIO_7__USB_OTG_HOST_MODE 0x240 0x610 0x000 0x7 0x0
-#define MX6Q_PAD_GPIO_8__ESAI_TX5_RX0 0x244 0x614 0x888 0x0 0x1
-#define MX6Q_PAD_GPIO_8__XTALOSC_REF_CLK_32K 0x244 0x614 0x000 0x1 0x0
-#define MX6Q_PAD_GPIO_8__EPIT2_OUT 0x244 0x614 0x000 0x2 0x0
-#define MX6Q_PAD_GPIO_8__FLEXCAN1_RX 0x244 0x614 0x7e4 0x3 0x1
-#define MX6Q_PAD_GPIO_8__UART2_RX_DATA 0x244 0x614 0x928 0x4 0x3
-#define MX6Q_PAD_GPIO_8__UART2_TX_DATA 0x244 0x614 0x000 0x4 0x0
-#define MX6Q_PAD_GPIO_8__GPIO1_IO08 0x244 0x614 0x000 0x5 0x0
-#define MX6Q_PAD_GPIO_8__SPDIF_SR_CLK 0x244 0x614 0x000 0x6 0x0
-#define MX6Q_PAD_GPIO_8__USB_OTG_PWR_CTL_WAKE 0x244 0x614 0x000 0x7 0x0
-#define MX6Q_PAD_GPIO_16__ESAI_TX3_RX2 0x248 0x618 0x880 0x0 0x1
-#define MX6Q_PAD_GPIO_16__ENET_1588_EVENT2_IN 0x248 0x618 0x000 0x1 0x0
-#define MX6Q_PAD_GPIO_16__ENET_REF_CLK 0x248 0x618 0x83c 0x2 0x1
-#define MX6Q_PAD_GPIO_16__SD1_LCTL 0x248 0x618 0x000 0x3 0x0
-#define MX6Q_PAD_GPIO_16__SPDIF_IN 0x248 0x618 0x914 0x4 0x3
-#define MX6Q_PAD_GPIO_16__GPIO7_IO11 0x248 0x618 0x000 0x5 0x0
-#define MX6Q_PAD_GPIO_16__I2C3_SDA 0x248 0x618 0x8ac 0x6 0x2
-#define MX6Q_PAD_GPIO_16__JTAG_DE_B 0x248 0x618 0x000 0x7 0x0
-#define MX6Q_PAD_GPIO_17__ESAI_TX0 0x24c 0x61c 0x874 0x0 0x0
-#define MX6Q_PAD_GPIO_17__ENET_1588_EVENT3_IN 0x24c 0x61c 0x000 0x1 0x0
-#define MX6Q_PAD_GPIO_17__CCM_PMIC_READY 0x24c 0x61c 0x7f0 0x2 0x1
-#define MX6Q_PAD_GPIO_17__SDMA_EXT_EVENT0 0x24c 0x61c 0x90c 0x3 0x1
-#define MX6Q_PAD_GPIO_17__SPDIF_OUT 0x24c 0x61c 0x000 0x4 0x0
-#define MX6Q_PAD_GPIO_17__GPIO7_IO12 0x24c 0x61c 0x000 0x5 0x0
-#define MX6Q_PAD_GPIO_18__ESAI_TX1 0x250 0x620 0x878 0x0 0x0
-#define MX6Q_PAD_GPIO_18__ENET_RX_CLK 0x250 0x620 0x844 0x1 0x1
-#define MX6Q_PAD_GPIO_18__SD3_VSELECT 0x250 0x620 0x000 0x2 0x0
-#define MX6Q_PAD_GPIO_18__SDMA_EXT_EVENT1 0x250 0x620 0x910 0x3 0x1
-#define MX6Q_PAD_GPIO_18__ASRC_EXT_CLK 0x250 0x620 0x7b0 0x4 0x2
-#define MX6Q_PAD_GPIO_18__GPIO7_IO13 0x250 0x620 0x000 0x5 0x0
-#define MX6Q_PAD_GPIO_18__SNVS_VIO_5_CTL 0x250 0x620 0x000 0x6 0x0
-#define MX6Q_PAD_GPIO_19__KEY_COL5 0x254 0x624 0x8e8 0x0 0x1
-#define MX6Q_PAD_GPIO_19__ENET_1588_EVENT0_OUT 0x254 0x624 0x000 0x1 0x0
-#define MX6Q_PAD_GPIO_19__SPDIF_OUT 0x254 0x624 0x000 0x2 0x0
-#define MX6Q_PAD_GPIO_19__CCM_CLKO1 0x254 0x624 0x000 0x3 0x0
-#define MX6Q_PAD_GPIO_19__ECSPI1_RDY 0x254 0x624 0x000 0x4 0x0
-#define MX6Q_PAD_GPIO_19__GPIO4_IO05 0x254 0x624 0x000 0x5 0x0
-#define MX6Q_PAD_GPIO_19__ENET_TX_ER 0x254 0x624 0x000 0x6 0x0
-#define MX6Q_PAD_CSI0_PIXCLK__IPU1_CSI0_PIXCLK 0x258 0x628 0x000 0x0 0x0
-#define MX6Q_PAD_CSI0_PIXCLK__GPIO5_IO18 0x258 0x628 0x000 0x5 0x0
-#define MX6Q_PAD_CSI0_PIXCLK__ARM_EVENTO 0x258 0x628 0x000 0x7 0x0
-#define MX6Q_PAD_CSI0_MCLK__IPU1_CSI0_HSYNC 0x25c 0x62c 0x000 0x0 0x0
-#define MX6Q_PAD_CSI0_MCLK__CCM_CLKO1 0x25c 0x62c 0x000 0x3 0x0
-#define MX6Q_PAD_CSI0_MCLK__GPIO5_IO19 0x25c 0x62c 0x000 0x5 0x0
-#define MX6Q_PAD_CSI0_MCLK__ARM_TRACE_CTL 0x25c 0x62c 0x000 0x7 0x0
-#define MX6Q_PAD_CSI0_DATA_EN__IPU1_CSI0_DATA_EN 0x260 0x630 0x000 0x0 0x0
-#define MX6Q_PAD_CSI0_DATA_EN__EIM_DATA00 0x260 0x630 0x000 0x1 0x0
-#define MX6Q_PAD_CSI0_DATA_EN__GPIO5_IO20 0x260 0x630 0x000 0x5 0x0
-#define MX6Q_PAD_CSI0_DATA_EN__ARM_TRACE_CLK 0x260 0x630 0x000 0x7 0x0
-#define MX6Q_PAD_CSI0_VSYNC__IPU1_CSI0_VSYNC 0x264 0x634 0x000 0x0 0x0
-#define MX6Q_PAD_CSI0_VSYNC__EIM_DATA01 0x264 0x634 0x000 0x1 0x0
-#define MX6Q_PAD_CSI0_VSYNC__GPIO5_IO21 0x264 0x634 0x000 0x5 0x0
-#define MX6Q_PAD_CSI0_VSYNC__ARM_TRACE00 0x264 0x634 0x000 0x7 0x0
-#define MX6Q_PAD_CSI0_DAT4__IPU1_CSI0_DATA04 0x268 0x638 0x000 0x0 0x0
-#define MX6Q_PAD_CSI0_DAT4__EIM_DATA02 0x268 0x638 0x000 0x1 0x0
-#define MX6Q_PAD_CSI0_DAT4__ECSPI1_SCLK 0x268 0x638 0x7f4 0x2 0x3
-#define MX6Q_PAD_CSI0_DAT4__KEY_COL5 0x268 0x638 0x8e8 0x3 0x2
-#define MX6Q_PAD_CSI0_DAT4__AUD3_TXC 0x268 0x638 0x000 0x4 0x0
-#define MX6Q_PAD_CSI0_DAT4__GPIO5_IO22 0x268 0x638 0x000 0x5 0x0
-#define MX6Q_PAD_CSI0_DAT4__ARM_TRACE01 0x268 0x638 0x000 0x7 0x0
-#define MX6Q_PAD_CSI0_DAT5__IPU1_CSI0_DATA05 0x26c 0x63c 0x000 0x0 0x0
-#define MX6Q_PAD_CSI0_DAT5__EIM_DATA03 0x26c 0x63c 0x000 0x1 0x0
-#define MX6Q_PAD_CSI0_DAT5__ECSPI1_MOSI 0x26c 0x63c 0x7fc 0x2 0x3
-#define MX6Q_PAD_CSI0_DAT5__KEY_ROW5 0x26c 0x63c 0x8f4 0x3 0x1
-#define MX6Q_PAD_CSI0_DAT5__AUD3_TXD 0x26c 0x63c 0x000 0x4 0x0
-#define MX6Q_PAD_CSI0_DAT5__GPIO5_IO23 0x26c 0x63c 0x000 0x5 0x0
-#define MX6Q_PAD_CSI0_DAT5__ARM_TRACE02 0x26c 0x63c 0x000 0x7 0x0
-#define MX6Q_PAD_CSI0_DAT6__IPU1_CSI0_DATA06 0x270 0x640 0x000 0x0 0x0
-#define MX6Q_PAD_CSI0_DAT6__EIM_DATA04 0x270 0x640 0x000 0x1 0x0
-#define MX6Q_PAD_CSI0_DAT6__ECSPI1_MISO 0x270 0x640 0x7f8 0x2 0x3
-#define MX6Q_PAD_CSI0_DAT6__KEY_COL6 0x270 0x640 0x8ec 0x3 0x1
-#define MX6Q_PAD_CSI0_DAT6__AUD3_TXFS 0x270 0x640 0x000 0x4 0x0
-#define MX6Q_PAD_CSI0_DAT6__GPIO5_IO24 0x270 0x640 0x000 0x5 0x0
-#define MX6Q_PAD_CSI0_DAT6__ARM_TRACE03 0x270 0x640 0x000 0x7 0x0
-#define MX6Q_PAD_CSI0_DAT7__IPU1_CSI0_DATA07 0x274 0x644 0x000 0x0 0x0
-#define MX6Q_PAD_CSI0_DAT7__EIM_DATA05 0x274 0x644 0x000 0x1 0x0
-#define MX6Q_PAD_CSI0_DAT7__ECSPI1_SS0 0x274 0x644 0x800 0x2 0x3
-#define MX6Q_PAD_CSI0_DAT7__KEY_ROW6 0x274 0x644 0x8f8 0x3 0x2
-#define MX6Q_PAD_CSI0_DAT7__AUD3_RXD 0x274 0x644 0x000 0x4 0x0
-#define MX6Q_PAD_CSI0_DAT7__GPIO5_IO25 0x274 0x644 0x000 0x5 0x0
-#define MX6Q_PAD_CSI0_DAT7__ARM_TRACE04 0x274 0x644 0x000 0x7 0x0
-#define MX6Q_PAD_CSI0_DAT8__IPU1_CSI0_DATA08 0x278 0x648 0x000 0x0 0x0
-#define MX6Q_PAD_CSI0_DAT8__EIM_DATA06 0x278 0x648 0x000 0x1 0x0
-#define MX6Q_PAD_CSI0_DAT8__ECSPI2_SCLK 0x278 0x648 0x810 0x2 0x2
-#define MX6Q_PAD_CSI0_DAT8__KEY_COL7 0x278 0x648 0x8f0 0x3 0x2
-#define MX6Q_PAD_CSI0_DAT8__I2C1_SDA 0x278 0x648 0x89c 0x4 0x1
-#define MX6Q_PAD_CSI0_DAT8__GPIO5_IO26 0x278 0x648 0x000 0x5 0x0
-#define MX6Q_PAD_CSI0_DAT8__ARM_TRACE05 0x278 0x648 0x000 0x7 0x0
-#define MX6Q_PAD_CSI0_DAT9__IPU1_CSI0_DATA09 0x27c 0x64c 0x000 0x0 0x0
-#define MX6Q_PAD_CSI0_DAT9__EIM_DATA07 0x27c 0x64c 0x000 0x1 0x0
-#define MX6Q_PAD_CSI0_DAT9__ECSPI2_MOSI 0x27c 0x64c 0x818 0x2 0x2
-#define MX6Q_PAD_CSI0_DAT9__KEY_ROW7 0x27c 0x64c 0x8fc 0x3 0x2
-#define MX6Q_PAD_CSI0_DAT9__I2C1_SCL 0x27c 0x64c 0x898 0x4 0x1
-#define MX6Q_PAD_CSI0_DAT9__GPIO5_IO27 0x27c 0x64c 0x000 0x5 0x0
-#define MX6Q_PAD_CSI0_DAT9__ARM_TRACE06 0x27c 0x64c 0x000 0x7 0x0
-#define MX6Q_PAD_CSI0_DAT10__IPU1_CSI0_DATA10 0x280 0x650 0x000 0x0 0x0
-#define MX6Q_PAD_CSI0_DAT10__AUD3_RXC 0x280 0x650 0x000 0x1 0x0
-#define MX6Q_PAD_CSI0_DAT10__ECSPI2_MISO 0x280 0x650 0x814 0x2 0x2
-#define MX6Q_PAD_CSI0_DAT10__UART1_TX_DATA 0x280 0x650 0x000 0x3 0x0
-#define MX6Q_PAD_CSI0_DAT10__UART1_RX_DATA 0x280 0x650 0x920 0x3 0x0
-#define MX6Q_PAD_CSI0_DAT10__GPIO5_IO28 0x280 0x650 0x000 0x5 0x0
-#define MX6Q_PAD_CSI0_DAT10__ARM_TRACE07 0x280 0x650 0x000 0x7 0x0
-#define MX6Q_PAD_CSI0_DAT11__IPU1_CSI0_DATA11 0x284 0x654 0x000 0x0 0x0
-#define MX6Q_PAD_CSI0_DAT11__AUD3_RXFS 0x284 0x654 0x000 0x1 0x0
-#define MX6Q_PAD_CSI0_DAT11__ECSPI2_SS0 0x284 0x654 0x81c 0x2 0x2
-#define MX6Q_PAD_CSI0_DAT11__UART1_RX_DATA 0x284 0x654 0x920 0x3 0x1
-#define MX6Q_PAD_CSI0_DAT11__UART1_TX_DATA 0x284 0x654 0x000 0x3 0x0
-#define MX6Q_PAD_CSI0_DAT11__GPIO5_IO29 0x284 0x654 0x000 0x5 0x0
-#define MX6Q_PAD_CSI0_DAT11__ARM_TRACE08 0x284 0x654 0x000 0x7 0x0
-#define MX6Q_PAD_CSI0_DAT12__IPU1_CSI0_DATA12 0x288 0x658 0x000 0x0 0x0
-#define MX6Q_PAD_CSI0_DAT12__EIM_DATA08 0x288 0x658 0x000 0x1 0x0
-#define MX6Q_PAD_CSI0_DAT12__UART4_TX_DATA 0x288 0x658 0x000 0x3 0x0
-#define MX6Q_PAD_CSI0_DAT12__UART4_RX_DATA 0x288 0x658 0x938 0x3 0x2
-#define MX6Q_PAD_CSI0_DAT12__GPIO5_IO30 0x288 0x658 0x000 0x5 0x0
-#define MX6Q_PAD_CSI0_DAT12__ARM_TRACE09 0x288 0x658 0x000 0x7 0x0
-#define MX6Q_PAD_CSI0_DAT13__IPU1_CSI0_DATA13 0x28c 0x65c 0x000 0x0 0x0
-#define MX6Q_PAD_CSI0_DAT13__EIM_DATA09 0x28c 0x65c 0x000 0x1 0x0
-#define MX6Q_PAD_CSI0_DAT13__UART4_RX_DATA 0x28c 0x65c 0x938 0x3 0x3
-#define MX6Q_PAD_CSI0_DAT13__UART4_TX_DATA 0x28c 0x65c 0x000 0x3 0x0
-#define MX6Q_PAD_CSI0_DAT13__GPIO5_IO31 0x28c 0x65c 0x000 0x5 0x0
-#define MX6Q_PAD_CSI0_DAT13__ARM_TRACE10 0x28c 0x65c 0x000 0x7 0x0
-#define MX6Q_PAD_CSI0_DAT14__IPU1_CSI0_DATA14 0x290 0x660 0x000 0x0 0x0
-#define MX6Q_PAD_CSI0_DAT14__EIM_DATA10 0x290 0x660 0x000 0x1 0x0
-#define MX6Q_PAD_CSI0_DAT14__UART5_TX_DATA 0x290 0x660 0x000 0x3 0x0
-#define MX6Q_PAD_CSI0_DAT14__UART5_RX_DATA 0x290 0x660 0x940 0x3 0x2
-#define MX6Q_PAD_CSI0_DAT14__GPIO6_IO00 0x290 0x660 0x000 0x5 0x0
-#define MX6Q_PAD_CSI0_DAT14__ARM_TRACE11 0x290 0x660 0x000 0x7 0x0
-#define MX6Q_PAD_CSI0_DAT15__IPU1_CSI0_DATA15 0x294 0x664 0x000 0x0 0x0
-#define MX6Q_PAD_CSI0_DAT15__EIM_DATA11 0x294 0x664 0x000 0x1 0x0
-#define MX6Q_PAD_CSI0_DAT15__UART5_RX_DATA 0x294 0x664 0x940 0x3 0x3
-#define MX6Q_PAD_CSI0_DAT15__UART5_TX_DATA 0x294 0x664 0x000 0x3 0x0
-#define MX6Q_PAD_CSI0_DAT15__GPIO6_IO01 0x294 0x664 0x000 0x5 0x0
-#define MX6Q_PAD_CSI0_DAT15__ARM_TRACE12 0x294 0x664 0x000 0x7 0x0
-#define MX6Q_PAD_CSI0_DAT16__IPU1_CSI0_DATA16 0x298 0x668 0x000 0x0 0x0
-#define MX6Q_PAD_CSI0_DAT16__EIM_DATA12 0x298 0x668 0x000 0x1 0x0
-#define MX6Q_PAD_CSI0_DAT16__UART4_RTS_B 0x298 0x668 0x934 0x3 0x0
-#define MX6Q_PAD_CSI0_DAT16__UART4_CTS_B 0x298 0x668 0x000 0x3 0x0
-#define MX6Q_PAD_CSI0_DAT16__GPIO6_IO02 0x298 0x668 0x000 0x5 0x0
-#define MX6Q_PAD_CSI0_DAT16__ARM_TRACE13 0x298 0x668 0x000 0x7 0x0
-#define MX6Q_PAD_CSI0_DAT17__IPU1_CSI0_DATA17 0x29c 0x66c 0x000 0x0 0x0
-#define MX6Q_PAD_CSI0_DAT17__EIM_DATA13 0x29c 0x66c 0x000 0x1 0x0
-#define MX6Q_PAD_CSI0_DAT17__UART4_CTS_B 0x29c 0x66c 0x000 0x3 0x0
-#define MX6Q_PAD_CSI0_DAT17__UART4_RTS_B 0x29c 0x66c 0x934 0x3 0x1
-#define MX6Q_PAD_CSI0_DAT17__GPIO6_IO03 0x29c 0x66c 0x000 0x5 0x0
-#define MX6Q_PAD_CSI0_DAT17__ARM_TRACE14 0x29c 0x66c 0x000 0x7 0x0
-#define MX6Q_PAD_CSI0_DAT18__IPU1_CSI0_DATA18 0x2a0 0x670 0x000 0x0 0x0
-#define MX6Q_PAD_CSI0_DAT18__EIM_DATA14 0x2a0 0x670 0x000 0x1 0x0
-#define MX6Q_PAD_CSI0_DAT18__UART5_RTS_B 0x2a0 0x670 0x93c 0x3 0x2
-#define MX6Q_PAD_CSI0_DAT18__UART5_CTS_B 0x2a0 0x670 0x000 0x3 0x0
-#define MX6Q_PAD_CSI0_DAT18__GPIO6_IO04 0x2a0 0x670 0x000 0x5 0x0
-#define MX6Q_PAD_CSI0_DAT18__ARM_TRACE15 0x2a0 0x670 0x000 0x7 0x0
-#define MX6Q_PAD_CSI0_DAT19__IPU1_CSI0_DATA19 0x2a4 0x674 0x000 0x0 0x0
-#define MX6Q_PAD_CSI0_DAT19__EIM_DATA15 0x2a4 0x674 0x000 0x1 0x0
-#define MX6Q_PAD_CSI0_DAT19__UART5_CTS_B 0x2a4 0x674 0x000 0x3 0x0
-#define MX6Q_PAD_CSI0_DAT19__UART5_RTS_B 0x2a4 0x674 0x93c 0x3 0x3
-#define MX6Q_PAD_CSI0_DAT19__GPIO6_IO05 0x2a4 0x674 0x000 0x5 0x0
-#define MX6Q_PAD_SD3_DAT7__SD3_DATA7 0x2a8 0x690 0x000 0x0 0x0
-#define MX6Q_PAD_SD3_DAT7__UART1_TX_DATA 0x2a8 0x690 0x000 0x1 0x0
-#define MX6Q_PAD_SD3_DAT7__UART1_RX_DATA 0x2a8 0x690 0x920 0x1 0x2
-#define MX6Q_PAD_SD3_DAT7__GPIO6_IO17 0x2a8 0x690 0x000 0x5 0x0
-#define MX6Q_PAD_SD3_DAT6__SD3_DATA6 0x2ac 0x694 0x000 0x0 0x0
-#define MX6Q_PAD_SD3_DAT6__UART1_RX_DATA 0x2ac 0x694 0x920 0x1 0x3
-#define MX6Q_PAD_SD3_DAT6__UART1_TX_DATA 0x2ac 0x694 0x000 0x1 0x0
-#define MX6Q_PAD_SD3_DAT6__GPIO6_IO18 0x2ac 0x694 0x000 0x5 0x0
-#define MX6Q_PAD_SD3_DAT5__SD3_DATA5 0x2b0 0x698 0x000 0x0 0x0
-#define MX6Q_PAD_SD3_DAT5__UART2_TX_DATA 0x2b0 0x698 0x000 0x1 0x0
-#define MX6Q_PAD_SD3_DAT5__UART2_RX_DATA 0x2b0 0x698 0x928 0x1 0x4
-#define MX6Q_PAD_SD3_DAT5__GPIO7_IO00 0x2b0 0x698 0x000 0x5 0x0
-#define MX6Q_PAD_SD3_DAT4__SD3_DATA4 0x2b4 0x69c 0x000 0x0 0x0
-#define MX6Q_PAD_SD3_DAT4__UART2_RX_DATA 0x2b4 0x69c 0x928 0x1 0x5
-#define MX6Q_PAD_SD3_DAT4__UART2_TX_DATA 0x2b4 0x69c 0x000 0x1 0x0
-#define MX6Q_PAD_SD3_DAT4__GPIO7_IO01 0x2b4 0x69c 0x000 0x5 0x0
-#define MX6Q_PAD_SD3_CMD__SD3_CMD 0x2b8 0x6a0 0x000 0x0 0x0
-#define MX6Q_PAD_SD3_CMD__UART2_CTS_B 0x2b8 0x6a0 0x000 0x1 0x0
-#define MX6Q_PAD_SD3_CMD__UART2_RTS_B 0x2b8 0x6a0 0x924 0x1 0x2
-#define MX6Q_PAD_SD3_CMD__FLEXCAN1_TX 0x2b8 0x6a0 0x000 0x2 0x0
-#define MX6Q_PAD_SD3_CMD__GPIO7_IO02 0x2b8 0x6a0 0x000 0x5 0x0
-#define MX6Q_PAD_SD3_CLK__SD3_CLK 0x2bc 0x6a4 0x000 0x0 0x0
-#define MX6Q_PAD_SD3_CLK__UART2_RTS_B 0x2bc 0x6a4 0x924 0x1 0x3
-#define MX6Q_PAD_SD3_CLK__UART2_CTS_B 0x2bc 0x6a4 0x000 0x1 0x0
-#define MX6Q_PAD_SD3_CLK__FLEXCAN1_RX 0x2bc 0x6a4 0x7e4 0x2 0x2
-#define MX6Q_PAD_SD3_CLK__GPIO7_IO03 0x2bc 0x6a4 0x000 0x5 0x0
-#define MX6Q_PAD_SD3_DAT0__SD3_DATA0 0x2c0 0x6a8 0x000 0x0 0x0
-#define MX6Q_PAD_SD3_DAT0__UART1_CTS_B 0x2c0 0x6a8 0x000 0x1 0x0
-#define MX6Q_PAD_SD3_DAT0__UART1_RTS_B 0x2c0 0x6a8 0x91c 0x1 0x2
-#define MX6Q_PAD_SD3_DAT0__FLEXCAN2_TX 0x2c0 0x6a8 0x000 0x2 0x0
-#define MX6Q_PAD_SD3_DAT0__GPIO7_IO04 0x2c0 0x6a8 0x000 0x5 0x0
-#define MX6Q_PAD_SD3_DAT1__SD3_DATA1 0x2c4 0x6ac 0x000 0x0 0x0
-#define MX6Q_PAD_SD3_DAT1__UART1_RTS_B 0x2c4 0x6ac 0x91c 0x1 0x3
-#define MX6Q_PAD_SD3_DAT1__UART1_CTS_B 0x2c4 0x6ac 0x000 0x1 0x0
-#define MX6Q_PAD_SD3_DAT1__FLEXCAN2_RX 0x2c4 0x6ac 0x7e8 0x2 0x1
-#define MX6Q_PAD_SD3_DAT1__GPIO7_IO05 0x2c4 0x6ac 0x000 0x5 0x0
-#define MX6Q_PAD_SD3_DAT2__SD3_DATA2 0x2c8 0x6b0 0x000 0x0 0x0
-#define MX6Q_PAD_SD3_DAT2__GPIO7_IO06 0x2c8 0x6b0 0x000 0x5 0x0
-#define MX6Q_PAD_SD3_DAT3__SD3_DATA3 0x2cc 0x6b4 0x000 0x0 0x0
-#define MX6Q_PAD_SD3_DAT3__UART3_CTS_B 0x2cc 0x6b4 0x000 0x1 0x0
-#define MX6Q_PAD_SD3_DAT3__UART3_RTS_B 0x2cc 0x6b4 0x92c 0x1 0x4
-#define MX6Q_PAD_SD3_DAT3__GPIO7_IO07 0x2cc 0x6b4 0x000 0x5 0x0
-#define MX6Q_PAD_SD3_RST__SD3_RESET 0x2d0 0x6b8 0x000 0x0 0x0
-#define MX6Q_PAD_SD3_RST__UART3_RTS_B 0x2d0 0x6b8 0x92c 0x1 0x5
-#define MX6Q_PAD_SD3_RST__UART3_CTS_B 0x2d0 0x6b8 0x000 0x1 0x0
-#define MX6Q_PAD_SD3_RST__GPIO7_IO08 0x2d0 0x6b8 0x000 0x5 0x0
-#define MX6Q_PAD_NANDF_CLE__NAND_CLE 0x2d4 0x6bc 0x000 0x0 0x0
-#define MX6Q_PAD_NANDF_CLE__IPU2_SISG4 0x2d4 0x6bc 0x000 0x1 0x0
-#define MX6Q_PAD_NANDF_CLE__GPIO6_IO07 0x2d4 0x6bc 0x000 0x5 0x0
-#define MX6Q_PAD_NANDF_ALE__NAND_ALE 0x2d8 0x6c0 0x000 0x0 0x0
-#define MX6Q_PAD_NANDF_ALE__SD4_RESET 0x2d8 0x6c0 0x000 0x1 0x0
-#define MX6Q_PAD_NANDF_ALE__GPIO6_IO08 0x2d8 0x6c0 0x000 0x5 0x0
-#define MX6Q_PAD_NANDF_WP_B__NAND_WP_B 0x2dc 0x6c4 0x000 0x0 0x0
-#define MX6Q_PAD_NANDF_WP_B__IPU2_SISG5 0x2dc 0x6c4 0x000 0x1 0x0
-#define MX6Q_PAD_NANDF_WP_B__GPIO6_IO09 0x2dc 0x6c4 0x000 0x5 0x0
-#define MX6Q_PAD_NANDF_RB0__NAND_READY_B 0x2e0 0x6c8 0x000 0x0 0x0
-#define MX6Q_PAD_NANDF_RB0__IPU2_DI0_PIN01 0x2e0 0x6c8 0x000 0x1 0x0
-#define MX6Q_PAD_NANDF_RB0__GPIO6_IO10 0x2e0 0x6c8 0x000 0x5 0x0
-#define MX6Q_PAD_NANDF_CS0__NAND_CE0_B 0x2e4 0x6cc 0x000 0x0 0x0
-#define MX6Q_PAD_NANDF_CS0__GPIO6_IO11 0x2e4 0x6cc 0x000 0x5 0x0
-#define MX6Q_PAD_NANDF_CS1__NAND_CE1_B 0x2e8 0x6d0 0x000 0x0 0x0
-#define MX6Q_PAD_NANDF_CS1__SD4_VSELECT 0x2e8 0x6d0 0x000 0x1 0x0
-#define MX6Q_PAD_NANDF_CS1__SD3_VSELECT 0x2e8 0x6d0 0x000 0x2 0x0
-#define MX6Q_PAD_NANDF_CS1__GPIO6_IO14 0x2e8 0x6d0 0x000 0x5 0x0
-#define MX6Q_PAD_NANDF_CS2__NAND_CE2_B 0x2ec 0x6d4 0x000 0x0 0x0
-#define MX6Q_PAD_NANDF_CS2__IPU1_SISG0 0x2ec 0x6d4 0x000 0x1 0x0
-#define MX6Q_PAD_NANDF_CS2__ESAI_TX0 0x2ec 0x6d4 0x874 0x2 0x1
-#define MX6Q_PAD_NANDF_CS2__EIM_CRE 0x2ec 0x6d4 0x000 0x3 0x0
-#define MX6Q_PAD_NANDF_CS2__CCM_CLKO2 0x2ec 0x6d4 0x000 0x4 0x0
-#define MX6Q_PAD_NANDF_CS2__GPIO6_IO15 0x2ec 0x6d4 0x000 0x5 0x0
-#define MX6Q_PAD_NANDF_CS2__IPU2_SISG0 0x2ec 0x6d4 0x000 0x6 0x0
-#define MX6Q_PAD_NANDF_CS3__NAND_CE3_B 0x2f0 0x6d8 0x000 0x0 0x0
-#define MX6Q_PAD_NANDF_CS3__IPU1_SISG1 0x2f0 0x6d8 0x000 0x1 0x0
-#define MX6Q_PAD_NANDF_CS3__ESAI_TX1 0x2f0 0x6d8 0x878 0x2 0x1
-#define MX6Q_PAD_NANDF_CS3__EIM_ADDR26 0x2f0 0x6d8 0x000 0x3 0x0
-#define MX6Q_PAD_NANDF_CS3__GPIO6_IO16 0x2f0 0x6d8 0x000 0x5 0x0
-#define MX6Q_PAD_NANDF_CS3__IPU2_SISG1 0x2f0 0x6d8 0x000 0x6 0x0
-#define MX6Q_PAD_SD4_CMD__SD4_CMD 0x2f4 0x6dc 0x000 0x0 0x0
-#define MX6Q_PAD_SD4_CMD__NAND_RE_B 0x2f4 0x6dc 0x000 0x1 0x0
-#define MX6Q_PAD_SD4_CMD__UART3_TX_DATA 0x2f4 0x6dc 0x000 0x2 0x0
-#define MX6Q_PAD_SD4_CMD__UART3_RX_DATA 0x2f4 0x6dc 0x930 0x2 0x2
-#define MX6Q_PAD_SD4_CMD__GPIO7_IO09 0x2f4 0x6dc 0x000 0x5 0x0
-#define MX6Q_PAD_SD4_CLK__SD4_CLK 0x2f8 0x6e0 0x000 0x0 0x0
-#define MX6Q_PAD_SD4_CLK__NAND_WE_B 0x2f8 0x6e0 0x000 0x1 0x0
-#define MX6Q_PAD_SD4_CLK__UART3_RX_DATA 0x2f8 0x6e0 0x930 0x2 0x3
-#define MX6Q_PAD_SD4_CLK__UART3_TX_DATA 0x2f8 0x6e0 0x000 0x2 0x0
-#define MX6Q_PAD_SD4_CLK__GPIO7_IO10 0x2f8 0x6e0 0x000 0x5 0x0
-#define MX6Q_PAD_NANDF_D0__NAND_DATA00 0x2fc 0x6e4 0x000 0x0 0x0
-#define MX6Q_PAD_NANDF_D0__SD1_DATA4 0x2fc 0x6e4 0x000 0x1 0x0
-#define MX6Q_PAD_NANDF_D0__GPIO2_IO00 0x2fc 0x6e4 0x000 0x5 0x0
-#define MX6Q_PAD_NANDF_D1__NAND_DATA01 0x300 0x6e8 0x000 0x0 0x0
-#define MX6Q_PAD_NANDF_D1__SD1_DATA5 0x300 0x6e8 0x000 0x1 0x0
-#define MX6Q_PAD_NANDF_D1__GPIO2_IO01 0x300 0x6e8 0x000 0x5 0x0
-#define MX6Q_PAD_NANDF_D2__NAND_DATA02 0x304 0x6ec 0x000 0x0 0x0
-#define MX6Q_PAD_NANDF_D2__SD1_DATA6 0x304 0x6ec 0x000 0x1 0x0
-#define MX6Q_PAD_NANDF_D2__GPIO2_IO02 0x304 0x6ec 0x000 0x5 0x0
-#define MX6Q_PAD_NANDF_D3__NAND_DATA03 0x308 0x6f0 0x000 0x0 0x0
-#define MX6Q_PAD_NANDF_D3__SD1_DATA7 0x308 0x6f0 0x000 0x1 0x0
-#define MX6Q_PAD_NANDF_D3__GPIO2_IO03 0x308 0x6f0 0x000 0x5 0x0
-#define MX6Q_PAD_NANDF_D4__NAND_DATA04 0x30c 0x6f4 0x000 0x0 0x0
-#define MX6Q_PAD_NANDF_D4__SD2_DATA4 0x30c 0x6f4 0x000 0x1 0x0
-#define MX6Q_PAD_NANDF_D4__GPIO2_IO04 0x30c 0x6f4 0x000 0x5 0x0
-#define MX6Q_PAD_NANDF_D5__NAND_DATA05 0x310 0x6f8 0x000 0x0 0x0
-#define MX6Q_PAD_NANDF_D5__SD2_DATA5 0x310 0x6f8 0x000 0x1 0x0
-#define MX6Q_PAD_NANDF_D5__GPIO2_IO05 0x310 0x6f8 0x000 0x5 0x0
-#define MX6Q_PAD_NANDF_D6__NAND_DATA06 0x314 0x6fc 0x000 0x0 0x0
-#define MX6Q_PAD_NANDF_D6__SD2_DATA6 0x314 0x6fc 0x000 0x1 0x0
-#define MX6Q_PAD_NANDF_D6__GPIO2_IO06 0x314 0x6fc 0x000 0x5 0x0
-#define MX6Q_PAD_NANDF_D7__NAND_DATA07 0x318 0x700 0x000 0x0 0x0
-#define MX6Q_PAD_NANDF_D7__SD2_DATA7 0x318 0x700 0x000 0x1 0x0
-#define MX6Q_PAD_NANDF_D7__GPIO2_IO07 0x318 0x700 0x000 0x5 0x0
-#define MX6Q_PAD_SD4_DAT0__SD4_DATA0 0x31c 0x704 0x000 0x1 0x0
-#define MX6Q_PAD_SD4_DAT0__NAND_DQS 0x31c 0x704 0x000 0x2 0x0
-#define MX6Q_PAD_SD4_DAT0__GPIO2_IO08 0x31c 0x704 0x000 0x5 0x0
-#define MX6Q_PAD_SD4_DAT1__SD4_DATA1 0x320 0x708 0x000 0x1 0x0
-#define MX6Q_PAD_SD4_DAT1__PWM3_OUT 0x320 0x708 0x000 0x2 0x0
-#define MX6Q_PAD_SD4_DAT1__GPIO2_IO09 0x320 0x708 0x000 0x5 0x0
-#define MX6Q_PAD_SD4_DAT2__SD4_DATA2 0x324 0x70c 0x000 0x1 0x0
-#define MX6Q_PAD_SD4_DAT2__PWM4_OUT 0x324 0x70c 0x000 0x2 0x0
-#define MX6Q_PAD_SD4_DAT2__GPIO2_IO10 0x324 0x70c 0x000 0x5 0x0
-#define MX6Q_PAD_SD4_DAT3__SD4_DATA3 0x328 0x710 0x000 0x1 0x0
-#define MX6Q_PAD_SD4_DAT3__GPIO2_IO11 0x328 0x710 0x000 0x5 0x0
-#define MX6Q_PAD_SD4_DAT4__SD4_DATA4 0x32c 0x714 0x000 0x1 0x0
-#define MX6Q_PAD_SD4_DAT4__UART2_RX_DATA 0x32c 0x714 0x928 0x2 0x6
-#define MX6Q_PAD_SD4_DAT4__UART2_TX_DATA 0x32c 0x714 0x000 0x2 0x0
-#define MX6Q_PAD_SD4_DAT4__GPIO2_IO12 0x32c 0x714 0x000 0x5 0x0
-#define MX6Q_PAD_SD4_DAT5__SD4_DATA5 0x330 0x718 0x000 0x1 0x0
-#define MX6Q_PAD_SD4_DAT5__UART2_RTS_B 0x330 0x718 0x924 0x2 0x4
-#define MX6Q_PAD_SD4_DAT5__UART2_CTS_B 0x330 0x718 0x000 0x2 0x0
-#define MX6Q_PAD_SD4_DAT5__GPIO2_IO13 0x330 0x718 0x000 0x5 0x0
-#define MX6Q_PAD_SD4_DAT6__SD4_DATA6 0x334 0x71c 0x000 0x1 0x0
-#define MX6Q_PAD_SD4_DAT6__UART2_CTS_B 0x334 0x71c 0x000 0x2 0x0
-#define MX6Q_PAD_SD4_DAT6__UART2_RTS_B 0x334 0x71c 0x924 0x2 0x5
-#define MX6Q_PAD_SD4_DAT6__GPIO2_IO14 0x334 0x71c 0x000 0x5 0x0
-#define MX6Q_PAD_SD4_DAT7__SD4_DATA7 0x338 0x720 0x000 0x1 0x0
-#define MX6Q_PAD_SD4_DAT7__UART2_TX_DATA 0x338 0x720 0x000 0x2 0x0
-#define MX6Q_PAD_SD4_DAT7__UART2_RX_DATA 0x338 0x720 0x928 0x2 0x7
-#define MX6Q_PAD_SD4_DAT7__GPIO2_IO15 0x338 0x720 0x000 0x5 0x0
-#define MX6Q_PAD_SD1_DAT1__SD1_DATA1 0x33c 0x724 0x000 0x0 0x0
-#define MX6Q_PAD_SD1_DAT1__ECSPI5_SS0 0x33c 0x724 0x834 0x1 0x1
-#define MX6Q_PAD_SD1_DAT1__PWM3_OUT 0x33c 0x724 0x000 0x2 0x0
-#define MX6Q_PAD_SD1_DAT1__GPT_CAPTURE2 0x33c 0x724 0x000 0x3 0x0
-#define MX6Q_PAD_SD1_DAT1__GPIO1_IO17 0x33c 0x724 0x000 0x5 0x0
-#define MX6Q_PAD_SD1_DAT0__SD1_DATA0 0x340 0x728 0x000 0x0 0x0
-#define MX6Q_PAD_SD1_DAT0__ECSPI5_MISO 0x340 0x728 0x82c 0x1 0x1
-#define MX6Q_PAD_SD1_DAT0__GPT_CAPTURE1 0x340 0x728 0x000 0x3 0x0
-#define MX6Q_PAD_SD1_DAT0__GPIO1_IO16 0x340 0x728 0x000 0x5 0x0
-#define MX6Q_PAD_SD1_DAT3__SD1_DATA3 0x344 0x72c 0x000 0x0 0x0
-#define MX6Q_PAD_SD1_DAT3__ECSPI5_SS2 0x344 0x72c 0x000 0x1 0x0
-#define MX6Q_PAD_SD1_DAT3__GPT_COMPARE3 0x344 0x72c 0x000 0x2 0x0
-#define MX6Q_PAD_SD1_DAT3__PWM1_OUT 0x344 0x72c 0x000 0x3 0x0
-#define MX6Q_PAD_SD1_DAT3__WDOG2_B 0x344 0x72c 0x000 0x4 0x0
-#define MX6Q_PAD_SD1_DAT3__GPIO1_IO21 0x344 0x72c 0x000 0x5 0x0
-#define MX6Q_PAD_SD1_DAT3__WDOG2_RESET_B_DEB 0x344 0x72c 0x000 0x6 0x0
-#define MX6Q_PAD_SD1_CMD__SD1_CMD 0x348 0x730 0x000 0x0 0x0
-#define MX6Q_PAD_SD1_CMD__ECSPI5_MOSI 0x348 0x730 0x830 0x1 0x0
-#define MX6Q_PAD_SD1_CMD__PWM4_OUT 0x348 0x730 0x000 0x2 0x0
-#define MX6Q_PAD_SD1_CMD__GPT_COMPARE1 0x348 0x730 0x000 0x3 0x0
-#define MX6Q_PAD_SD1_CMD__GPIO1_IO18 0x348 0x730 0x000 0x5 0x0
-#define MX6Q_PAD_SD1_DAT2__SD1_DATA2 0x34c 0x734 0x000 0x0 0x0
-#define MX6Q_PAD_SD1_DAT2__ECSPI5_SS1 0x34c 0x734 0x838 0x1 0x1
-#define MX6Q_PAD_SD1_DAT2__GPT_COMPARE2 0x34c 0x734 0x000 0x2 0x0
-#define MX6Q_PAD_SD1_DAT2__PWM2_OUT 0x34c 0x734 0x000 0x3 0x0
-#define MX6Q_PAD_SD1_DAT2__WDOG1_B 0x34c 0x734 0x000 0x4 0x0
-#define MX6Q_PAD_SD1_DAT2__GPIO1_IO19 0x34c 0x734 0x000 0x5 0x0
-#define MX6Q_PAD_SD1_DAT2__WDOG1_RESET_B_DEB 0x34c 0x734 0x000 0x6 0x0
-#define MX6Q_PAD_SD1_CLK__SD1_CLK 0x350 0x738 0x000 0x0 0x0
-#define MX6Q_PAD_SD1_CLK__ECSPI5_SCLK 0x350 0x738 0x828 0x1 0x0
-#define MX6Q_PAD_SD1_CLK__GPT_CLKIN 0x350 0x738 0x000 0x3 0x0
-#define MX6Q_PAD_SD1_CLK__GPIO1_IO20 0x350 0x738 0x000 0x5 0x0
-#define MX6Q_PAD_SD2_CLK__SD2_CLK 0x354 0x73c 0x000 0x0 0x0
-#define MX6Q_PAD_SD2_CLK__ECSPI5_SCLK 0x354 0x73c 0x828 0x1 0x1
-#define MX6Q_PAD_SD2_CLK__KEY_COL5 0x354 0x73c 0x8e8 0x2 0x3
-#define MX6Q_PAD_SD2_CLK__AUD4_RXFS 0x354 0x73c 0x7c0 0x3 0x1
-#define MX6Q_PAD_SD2_CLK__GPIO1_IO10 0x354 0x73c 0x000 0x5 0x0
-#define MX6Q_PAD_SD2_CMD__SD2_CMD 0x358 0x740 0x000 0x0 0x0
-#define MX6Q_PAD_SD2_CMD__ECSPI5_MOSI 0x358 0x740 0x830 0x1 0x1
-#define MX6Q_PAD_SD2_CMD__KEY_ROW5 0x358 0x740 0x8f4 0x2 0x2
-#define MX6Q_PAD_SD2_CMD__AUD4_RXC 0x358 0x740 0x7bc 0x3 0x1
-#define MX6Q_PAD_SD2_CMD__GPIO1_IO11 0x358 0x740 0x000 0x5 0x0
-#define MX6Q_PAD_SD2_DAT3__SD2_DATA3 0x35c 0x744 0x000 0x0 0x0
-#define MX6Q_PAD_SD2_DAT3__ECSPI5_SS3 0x35c 0x744 0x000 0x1 0x0
-#define MX6Q_PAD_SD2_DAT3__KEY_COL6 0x35c 0x744 0x8ec 0x2 0x2
-#define MX6Q_PAD_SD2_DAT3__AUD4_TXC 0x35c 0x744 0x7c4 0x3 0x1
-#define MX6Q_PAD_SD2_DAT3__GPIO1_IO12 0x35c 0x744 0x000 0x5 0x0
+#define MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x04c 0x360 0x000 0x0 0x0
+#define MX6QDL_PAD_SD2_DAT1__ECSPI5_SS0 0x04c 0x360 0x834 0x1 0x0
+#define MX6QDL_PAD_SD2_DAT1__EIM_CS2_B 0x04c 0x360 0x000 0x2 0x0
+#define MX6QDL_PAD_SD2_DAT1__AUD4_TXFS 0x04c 0x360 0x7c8 0x3 0x0
+#define MX6QDL_PAD_SD2_DAT1__KEY_COL7 0x04c 0x360 0x8f0 0x4 0x0
+#define MX6QDL_PAD_SD2_DAT1__GPIO1_IO14 0x04c 0x360 0x000 0x5 0x0
+#define MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x050 0x364 0x000 0x0 0x0
+#define MX6QDL_PAD_SD2_DAT2__ECSPI5_SS1 0x050 0x364 0x838 0x1 0x0
+#define MX6QDL_PAD_SD2_DAT2__EIM_CS3_B 0x050 0x364 0x000 0x2 0x0
+#define MX6QDL_PAD_SD2_DAT2__AUD4_TXD 0x050 0x364 0x7b8 0x3 0x0
+#define MX6QDL_PAD_SD2_DAT2__KEY_ROW6 0x050 0x364 0x8f8 0x4 0x0
+#define MX6QDL_PAD_SD2_DAT2__GPIO1_IO13 0x050 0x364 0x000 0x5 0x0
+#define MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x054 0x368 0x000 0x0 0x0
+#define MX6QDL_PAD_SD2_DAT0__ECSPI5_MISO 0x054 0x368 0x82c 0x1 0x0
+#define MX6QDL_PAD_SD2_DAT0__AUD4_RXD 0x054 0x368 0x7b4 0x3 0x0
+#define MX6QDL_PAD_SD2_DAT0__KEY_ROW7 0x054 0x368 0x8fc 0x4 0x0
+#define MX6QDL_PAD_SD2_DAT0__GPIO1_IO15 0x054 0x368 0x000 0x5 0x0
+#define MX6QDL_PAD_SD2_DAT0__DCIC2_OUT 0x054 0x368 0x000 0x6 0x0
+#define MX6QDL_PAD_RGMII_TXC__USB_H2_DATA 0x058 0x36c 0x000 0x0 0x0
+#define MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x058 0x36c 0x000 0x1 0x0
+#define MX6QDL_PAD_RGMII_TXC__SPDIF_EXT_CLK 0x058 0x36c 0x918 0x2 0x0
+#define MX6QDL_PAD_RGMII_TXC__GPIO6_IO19 0x058 0x36c 0x000 0x5 0x0
+#define MX6QDL_PAD_RGMII_TXC__XTALOSC_REF_CLK_24M 0x058 0x36c 0x000 0x7 0x0
+#define MX6QDL_PAD_RGMII_TD0__HSI_TX_READY 0x05c 0x370 0x000 0x0 0x0
+#define MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x05c 0x370 0x000 0x1 0x0
+#define MX6QDL_PAD_RGMII_TD0__GPIO6_IO20 0x05c 0x370 0x000 0x5 0x0
+#define MX6QDL_PAD_RGMII_TD1__HSI_RX_FLAG 0x060 0x374 0x000 0x0 0x0
+#define MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x060 0x374 0x000 0x1 0x0
+#define MX6QDL_PAD_RGMII_TD1__GPIO6_IO21 0x060 0x374 0x000 0x5 0x0
+#define MX6QDL_PAD_RGMII_TD2__HSI_RX_DATA 0x064 0x378 0x000 0x0 0x0
+#define MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x064 0x378 0x000 0x1 0x0
+#define MX6QDL_PAD_RGMII_TD2__GPIO6_IO22 0x064 0x378 0x000 0x5 0x0
+#define MX6QDL_PAD_RGMII_TD3__HSI_RX_WAKE 0x068 0x37c 0x000 0x0 0x0
+#define MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x068 0x37c 0x000 0x1 0x0
+#define MX6QDL_PAD_RGMII_TD3__GPIO6_IO23 0x068 0x37c 0x000 0x5 0x0
+#define MX6QDL_PAD_RGMII_RX_CTL__USB_H3_DATA 0x06c 0x380 0x000 0x0 0x0
+#define MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x06c 0x380 0x858 0x1 0x0
+#define MX6QDL_PAD_RGMII_RX_CTL__GPIO6_IO24 0x06c 0x380 0x000 0x5 0x0
+#define MX6QDL_PAD_RGMII_RD0__HSI_RX_READY 0x070 0x384 0x000 0x0 0x0
+#define MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x070 0x384 0x848 0x1 0x0
+#define MX6QDL_PAD_RGMII_RD0__GPIO6_IO25 0x070 0x384 0x000 0x5 0x0
+#define MX6QDL_PAD_RGMII_TX_CTL__USB_H2_STROBE 0x074 0x388 0x000 0x0 0x0
+#define MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x074 0x388 0x000 0x1 0x0
+#define MX6QDL_PAD_RGMII_TX_CTL__GPIO6_IO26 0x074 0x388 0x000 0x5 0x0
+#define MX6QDL_PAD_RGMII_TX_CTL__ENET_REF_CLK 0x074 0x388 0x83c 0x7 0x0
+#define MX6QDL_PAD_RGMII_RD1__HSI_TX_FLAG 0x078 0x38c 0x000 0x0 0x0
+#define MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x078 0x38c 0x84c 0x1 0x0
+#define MX6QDL_PAD_RGMII_RD1__GPIO6_IO27 0x078 0x38c 0x000 0x5 0x0
+#define MX6QDL_PAD_RGMII_RD2__HSI_TX_DATA 0x07c 0x390 0x000 0x0 0x0
+#define MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x07c 0x390 0x850 0x1 0x0
+#define MX6QDL_PAD_RGMII_RD2__GPIO6_IO28 0x07c 0x390 0x000 0x5 0x0
+#define MX6QDL_PAD_RGMII_RD3__HSI_TX_WAKE 0x080 0x394 0x000 0x0 0x0
+#define MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x080 0x394 0x854 0x1 0x0
+#define MX6QDL_PAD_RGMII_RD3__GPIO6_IO29 0x080 0x394 0x000 0x5 0x0
+#define MX6QDL_PAD_RGMII_RXC__USB_H3_STROBE 0x084 0x398 0x000 0x0 0x0
+#define MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x084 0x398 0x844 0x1 0x0
+#define MX6QDL_PAD_RGMII_RXC__GPIO6_IO30 0x084 0x398 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_A25__EIM_ADDR25 0x088 0x39c 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_A25__ECSPI4_SS1 0x088 0x39c 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_A25__ECSPI2_RDY 0x088 0x39c 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_A25__IPU1_DI1_PIN12 0x088 0x39c 0x000 0x3 0x0
+#define MX6QDL_PAD_EIM_A25__IPU1_DI0_D1_CS 0x088 0x39c 0x000 0x4 0x0
+#define MX6QDL_PAD_EIM_A25__GPIO5_IO02 0x088 0x39c 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_A25__HDMI_TX_CEC_LINE 0x088 0x39c 0x88c 0x6 0x0
+#define MX6QDL_PAD_EIM_EB2__EIM_EB2_B 0x08c 0x3a0 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_EB2__ECSPI1_SS0 0x08c 0x3a0 0x800 0x1 0x0
+#define MX6QDL_PAD_EIM_EB2__IPU2_CSI1_DATA19 0x08c 0x3a0 0x8d4 0x3 0x0
+#define MX6QDL_PAD_EIM_EB2__HDMI_TX_DDC_SCL 0x08c 0x3a0 0x890 0x4 0x0
+#define MX6QDL_PAD_EIM_EB2__GPIO2_IO30 0x08c 0x3a0 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_EB2__I2C2_SCL 0x08c 0x3a0 0x8a0 0x6 0x0
+#define MX6QDL_PAD_EIM_EB2__SRC_BOOT_CFG30 0x08c 0x3a0 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_D16__EIM_DATA16 0x090 0x3a4 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_D16__ECSPI1_SCLK 0x090 0x3a4 0x7f4 0x1 0x0
+#define MX6QDL_PAD_EIM_D16__IPU1_DI0_PIN05 0x090 0x3a4 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_D16__IPU2_CSI1_DATA18 0x090 0x3a4 0x8d0 0x3 0x0
+#define MX6QDL_PAD_EIM_D16__HDMI_TX_DDC_SDA 0x090 0x3a4 0x894 0x4 0x0
+#define MX6QDL_PAD_EIM_D16__GPIO3_IO16 0x090 0x3a4 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_D16__I2C2_SDA 0x090 0x3a4 0x8a4 0x6 0x0
+#define MX6QDL_PAD_EIM_D17__EIM_DATA17 0x094 0x3a8 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_D17__ECSPI1_MISO 0x094 0x3a8 0x7f8 0x1 0x0
+#define MX6QDL_PAD_EIM_D17__IPU1_DI0_PIN06 0x094 0x3a8 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_D17__IPU2_CSI1_PIXCLK 0x094 0x3a8 0x8e0 0x3 0x0
+#define MX6QDL_PAD_EIM_D17__DCIC1_OUT 0x094 0x3a8 0x000 0x4 0x0
+#define MX6QDL_PAD_EIM_D17__GPIO3_IO17 0x094 0x3a8 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_D17__I2C3_SCL 0x094 0x3a8 0x8a8 0x6 0x0
+#define MX6QDL_PAD_EIM_D18__EIM_DATA18 0x098 0x3ac 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_D18__ECSPI1_MOSI 0x098 0x3ac 0x7fc 0x1 0x0
+#define MX6QDL_PAD_EIM_D18__IPU1_DI0_PIN07 0x098 0x3ac 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_D18__IPU2_CSI1_DATA17 0x098 0x3ac 0x8cc 0x3 0x0
+#define MX6QDL_PAD_EIM_D18__IPU1_DI1_D0_CS 0x098 0x3ac 0x000 0x4 0x0
+#define MX6QDL_PAD_EIM_D18__GPIO3_IO18 0x098 0x3ac 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_D18__I2C3_SDA 0x098 0x3ac 0x8ac 0x6 0x0
+#define MX6QDL_PAD_EIM_D19__EIM_DATA19 0x09c 0x3b0 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_D19__ECSPI1_SS1 0x09c 0x3b0 0x804 0x1 0x0
+#define MX6QDL_PAD_EIM_D19__IPU1_DI0_PIN08 0x09c 0x3b0 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_D19__IPU2_CSI1_DATA16 0x09c 0x3b0 0x8c8 0x3 0x0
+#define MX6QDL_PAD_EIM_D19__UART1_CTS_B 0x09c 0x3b0 0x000 0x4 0x0
+#define MX6QDL_PAD_EIM_D19__UART1_RTS_B 0x09c 0x3b0 0x91c 0x4 0x0
+#define MX6QDL_PAD_EIM_D19__GPIO3_IO19 0x09c 0x3b0 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_D19__EPIT1_OUT 0x09c 0x3b0 0x000 0x6 0x0
+#define MX6QDL_PAD_EIM_D20__EIM_DATA20 0x0a0 0x3b4 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_D20__ECSPI4_SS0 0x0a0 0x3b4 0x824 0x1 0x0
+#define MX6QDL_PAD_EIM_D20__IPU1_DI0_PIN16 0x0a0 0x3b4 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_D20__IPU2_CSI1_DATA15 0x0a0 0x3b4 0x8c4 0x3 0x0
+#define MX6QDL_PAD_EIM_D20__UART1_RTS_B 0x0a0 0x3b4 0x91c 0x4 0x1
+#define MX6QDL_PAD_EIM_D20__UART1_CTS_B 0x0a0 0x3b4 0x000 0x4 0x0
+#define MX6QDL_PAD_EIM_D20__GPIO3_IO20 0x0a0 0x3b4 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_D20__EPIT2_OUT 0x0a0 0x3b4 0x000 0x6 0x0
+#define MX6QDL_PAD_EIM_D21__EIM_DATA21 0x0a4 0x3b8 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_D21__ECSPI4_SCLK 0x0a4 0x3b8 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_D21__IPU1_DI0_PIN17 0x0a4 0x3b8 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_D21__IPU2_CSI1_DATA11 0x0a4 0x3b8 0x8b4 0x3 0x0
+#define MX6QDL_PAD_EIM_D21__USB_OTG_OC 0x0a4 0x3b8 0x944 0x4 0x0
+#define MX6QDL_PAD_EIM_D21__GPIO3_IO21 0x0a4 0x3b8 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_D21__I2C1_SCL 0x0a4 0x3b8 0x898 0x6 0x0
+#define MX6QDL_PAD_EIM_D21__SPDIF_IN 0x0a4 0x3b8 0x914 0x7 0x0
+#define MX6QDL_PAD_EIM_D22__EIM_DATA22 0x0a8 0x3bc 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_D22__ECSPI4_MISO 0x0a8 0x3bc 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_D22__IPU1_DI0_PIN01 0x0a8 0x3bc 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_D22__IPU2_CSI1_DATA10 0x0a8 0x3bc 0x8b0 0x3 0x0
+#define MX6QDL_PAD_EIM_D22__USB_OTG_PWR 0x0a8 0x3bc 0x000 0x4 0x0
+#define MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x0a8 0x3bc 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_D22__SPDIF_OUT 0x0a8 0x3bc 0x000 0x6 0x0
+#define MX6QDL_PAD_EIM_D23__EIM_DATA23 0x0ac 0x3c0 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_D23__IPU1_DI0_D0_CS 0x0ac 0x3c0 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_D23__UART3_CTS_B 0x0ac 0x3c0 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_D23__UART3_RTS_B 0x0ac 0x3c0 0x92c 0x2 0x0
+#define MX6QDL_PAD_EIM_D23__UART1_DCD_B 0x0ac 0x3c0 0x000 0x3 0x0
+#define MX6QDL_PAD_EIM_D23__IPU2_CSI1_DATA_EN 0x0ac 0x3c0 0x8d8 0x4 0x0
+#define MX6QDL_PAD_EIM_D23__GPIO3_IO23 0x0ac 0x3c0 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_D23__IPU1_DI1_PIN02 0x0ac 0x3c0 0x000 0x6 0x0
+#define MX6QDL_PAD_EIM_D23__IPU1_DI1_PIN14 0x0ac 0x3c0 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_EB3__EIM_EB3_B 0x0b0 0x3c4 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_EB3__ECSPI4_RDY 0x0b0 0x3c4 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_EB3__UART3_RTS_B 0x0b0 0x3c4 0x92c 0x2 0x1
+#define MX6QDL_PAD_EIM_EB3__UART3_CTS_B 0x0b0 0x3c4 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_EB3__UART1_RI_B 0x0b0 0x3c4 0x000 0x3 0x0
+#define MX6QDL_PAD_EIM_EB3__IPU2_CSI1_HSYNC 0x0b0 0x3c4 0x8dc 0x4 0x0
+#define MX6QDL_PAD_EIM_EB3__GPIO2_IO31 0x0b0 0x3c4 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_EB3__IPU1_DI1_PIN03 0x0b0 0x3c4 0x000 0x6 0x0
+#define MX6QDL_PAD_EIM_EB3__SRC_BOOT_CFG31 0x0b0 0x3c4 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_D24__EIM_DATA24 0x0b4 0x3c8 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_D24__ECSPI4_SS2 0x0b4 0x3c8 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x0b4 0x3c8 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_D24__UART3_RX_DATA 0x0b4 0x3c8 0x930 0x2 0x0
+#define MX6QDL_PAD_EIM_D24__ECSPI1_SS2 0x0b4 0x3c8 0x808 0x3 0x0
+#define MX6QDL_PAD_EIM_D24__ECSPI2_SS2 0x0b4 0x3c8 0x000 0x4 0x0
+#define MX6QDL_PAD_EIM_D24__GPIO3_IO24 0x0b4 0x3c8 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_D24__AUD5_RXFS 0x0b4 0x3c8 0x7d8 0x6 0x0
+#define MX6QDL_PAD_EIM_D24__UART1_DTR_B 0x0b4 0x3c8 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_D25__EIM_DATA25 0x0b8 0x3cc 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_D25__ECSPI4_SS3 0x0b8 0x3cc 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x0b8 0x3cc 0x930 0x2 0x1
+#define MX6QDL_PAD_EIM_D25__UART3_TX_DATA 0x0b8 0x3cc 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_D25__ECSPI1_SS3 0x0b8 0x3cc 0x80c 0x3 0x0
+#define MX6QDL_PAD_EIM_D25__ECSPI2_SS3 0x0b8 0x3cc 0x000 0x4 0x0
+#define MX6QDL_PAD_EIM_D25__GPIO3_IO25 0x0b8 0x3cc 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_D25__AUD5_RXC 0x0b8 0x3cc 0x7d4 0x6 0x0
+#define MX6QDL_PAD_EIM_D25__UART1_DSR_B 0x0b8 0x3cc 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_D26__EIM_DATA26 0x0bc 0x3d0 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_D26__IPU1_DI1_PIN11 0x0bc 0x3d0 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_D26__IPU1_CSI0_DATA01 0x0bc 0x3d0 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_D26__IPU2_CSI1_DATA14 0x0bc 0x3d0 0x8c0 0x3 0x0
+#define MX6QDL_PAD_EIM_D26__UART2_TX_DATA 0x0bc 0x3d0 0x000 0x4 0x0
+#define MX6QDL_PAD_EIM_D26__UART2_RX_DATA 0x0bc 0x3d0 0x928 0x4 0x0
+#define MX6QDL_PAD_EIM_D26__GPIO3_IO26 0x0bc 0x3d0 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_D26__IPU1_SISG2 0x0bc 0x3d0 0x000 0x6 0x0
+#define MX6QDL_PAD_EIM_D26__IPU1_DISP1_DATA22 0x0bc 0x3d0 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_D27__EIM_DATA27 0x0c0 0x3d4 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_D27__IPU1_DI1_PIN13 0x0c0 0x3d4 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_D27__IPU1_CSI0_DATA00 0x0c0 0x3d4 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_D27__IPU2_CSI1_DATA13 0x0c0 0x3d4 0x8bc 0x3 0x0
+#define MX6QDL_PAD_EIM_D27__UART2_RX_DATA 0x0c0 0x3d4 0x928 0x4 0x1
+#define MX6QDL_PAD_EIM_D27__UART2_TX_DATA 0x0c0 0x3d4 0x000 0x4 0x0
+#define MX6QDL_PAD_EIM_D27__GPIO3_IO27 0x0c0 0x3d4 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_D27__IPU1_SISG3 0x0c0 0x3d4 0x000 0x6 0x0
+#define MX6QDL_PAD_EIM_D27__IPU1_DISP1_DATA23 0x0c0 0x3d4 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_D28__EIM_DATA28 0x0c4 0x3d8 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_D28__I2C1_SDA 0x0c4 0x3d8 0x89c 0x1 0x0
+#define MX6QDL_PAD_EIM_D28__ECSPI4_MOSI 0x0c4 0x3d8 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_D28__IPU2_CSI1_DATA12 0x0c4 0x3d8 0x8b8 0x3 0x0
+#define MX6QDL_PAD_EIM_D28__UART2_CTS_B 0x0c4 0x3d8 0x000 0x4 0x0
+#define MX6QDL_PAD_EIM_D28__UART2_RTS_B 0x0c4 0x3d8 0x924 0x4 0x0
+#define MX6QDL_PAD_EIM_D28__UART2_DTE_CTS_B 0x0c4 0x3d8 0x924 0x4 0x0
+#define MX6QDL_PAD_EIM_D28__UART2_DTE_RTS_B 0x0c4 0x3d8 0x000 0x4 0x0
+#define MX6QDL_PAD_EIM_D28__GPIO3_IO28 0x0c4 0x3d8 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_D28__IPU1_EXT_TRIG 0x0c4 0x3d8 0x000 0x6 0x0
+#define MX6QDL_PAD_EIM_D28__IPU1_DI0_PIN13 0x0c4 0x3d8 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_D29__EIM_DATA29 0x0c8 0x3dc 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_D29__IPU1_DI1_PIN15 0x0c8 0x3dc 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_D29__ECSPI4_SS0 0x0c8 0x3dc 0x824 0x2 0x1
+#define MX6QDL_PAD_EIM_D29__UART2_RTS_B 0x0c8 0x3dc 0x924 0x4 0x1
+#define MX6QDL_PAD_EIM_D29__UART2_CTS_B 0x0c8 0x3dc 0x000 0x4 0x0
+#define MX6QDL_PAD_EIM_D29__UART2_DTE_RTS_B 0x0c4 0x3dc 0x000 0x4 0x0
+#define MX6QDL_PAD_EIM_D29__UART2_DTE_CTS_B 0x0c4 0x3dc 0x924 0x4 0x1
+#define MX6QDL_PAD_EIM_D29__GPIO3_IO29 0x0c8 0x3dc 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_D29__IPU2_CSI1_VSYNC 0x0c8 0x3dc 0x8e4 0x6 0x0
+#define MX6QDL_PAD_EIM_D29__IPU1_DI0_PIN14 0x0c8 0x3dc 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_D30__EIM_DATA30 0x0cc 0x3e0 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_D30__IPU1_DISP1_DATA21 0x0cc 0x3e0 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_D30__IPU1_DI0_PIN11 0x0cc 0x3e0 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_D30__IPU1_CSI0_DATA03 0x0cc 0x3e0 0x000 0x3 0x0
+#define MX6QDL_PAD_EIM_D30__UART3_CTS_B 0x0cc 0x3e0 0x000 0x4 0x0
+#define MX6QDL_PAD_EIM_D30__UART3_RTS_B 0x0cc 0x3e0 0x92c 0x4 0x2
+#define MX6QDL_PAD_EIM_D30__GPIO3_IO30 0x0cc 0x3e0 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_D30__USB_H1_OC 0x0cc 0x3e0 0x948 0x6 0x0
+#define MX6QDL_PAD_EIM_D31__EIM_DATA31 0x0d0 0x3e4 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_D31__IPU1_DISP1_DATA20 0x0d0 0x3e4 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_D31__IPU1_DI0_PIN12 0x0d0 0x3e4 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_D31__IPU1_CSI0_DATA02 0x0d0 0x3e4 0x000 0x3 0x0
+#define MX6QDL_PAD_EIM_D31__UART3_RTS_B 0x0d0 0x3e4 0x92c 0x4 0x3
+#define MX6QDL_PAD_EIM_D31__UART3_CTS_B 0x0d0 0x3e4 0x000 0x4 0x0
+#define MX6QDL_PAD_EIM_D31__GPIO3_IO31 0x0d0 0x3e4 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_D31__USB_H1_PWR 0x0d0 0x3e4 0x000 0x6 0x0
+#define MX6QDL_PAD_EIM_A24__EIM_ADDR24 0x0d4 0x3e8 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_A24__IPU1_DISP1_DATA19 0x0d4 0x3e8 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_A24__IPU2_CSI1_DATA19 0x0d4 0x3e8 0x8d4 0x2 0x1
+#define MX6QDL_PAD_EIM_A24__IPU2_SISG2 0x0d4 0x3e8 0x000 0x3 0x0
+#define MX6QDL_PAD_EIM_A24__IPU1_SISG2 0x0d4 0x3e8 0x000 0x4 0x0
+#define MX6QDL_PAD_EIM_A24__GPIO5_IO04 0x0d4 0x3e8 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_A24__SRC_BOOT_CFG24 0x0d4 0x3e8 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_A23__EIM_ADDR23 0x0d8 0x3ec 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_A23__IPU1_DISP1_DATA18 0x0d8 0x3ec 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_A23__IPU2_CSI1_DATA18 0x0d8 0x3ec 0x8d0 0x2 0x1
+#define MX6QDL_PAD_EIM_A23__IPU2_SISG3 0x0d8 0x3ec 0x000 0x3 0x0
+#define MX6QDL_PAD_EIM_A23__IPU1_SISG3 0x0d8 0x3ec 0x000 0x4 0x0
+#define MX6QDL_PAD_EIM_A23__GPIO6_IO06 0x0d8 0x3ec 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_A23__SRC_BOOT_CFG23 0x0d8 0x3ec 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_A22__EIM_ADDR22 0x0dc 0x3f0 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_A22__IPU1_DISP1_DATA17 0x0dc 0x3f0 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_A22__IPU2_CSI1_DATA17 0x0dc 0x3f0 0x8cc 0x2 0x1
+#define MX6QDL_PAD_EIM_A22__GPIO2_IO16 0x0dc 0x3f0 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_A22__SRC_BOOT_CFG22 0x0dc 0x3f0 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_A21__EIM_ADDR21 0x0e0 0x3f4 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_A21__IPU1_DISP1_DATA16 0x0e0 0x3f4 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_A21__IPU2_CSI1_DATA16 0x0e0 0x3f4 0x8c8 0x2 0x1
+#define MX6QDL_PAD_EIM_A21__GPIO2_IO17 0x0e0 0x3f4 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_A21__SRC_BOOT_CFG21 0x0e0 0x3f4 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_A20__EIM_ADDR20 0x0e4 0x3f8 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_A20__IPU1_DISP1_DATA15 0x0e4 0x3f8 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_A20__IPU2_CSI1_DATA15 0x0e4 0x3f8 0x8c4 0x2 0x1
+#define MX6QDL_PAD_EIM_A20__GPIO2_IO18 0x0e4 0x3f8 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_A20__SRC_BOOT_CFG20 0x0e4 0x3f8 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_A19__EIM_ADDR19 0x0e8 0x3fc 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_A19__IPU1_DISP1_DATA14 0x0e8 0x3fc 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_A19__IPU2_CSI1_DATA14 0x0e8 0x3fc 0x8c0 0x2 0x1
+#define MX6QDL_PAD_EIM_A19__GPIO2_IO19 0x0e8 0x3fc 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_A19__SRC_BOOT_CFG19 0x0e8 0x3fc 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_A18__EIM_ADDR18 0x0ec 0x400 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_A18__IPU1_DISP1_DATA13 0x0ec 0x400 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_A18__IPU2_CSI1_DATA13 0x0ec 0x400 0x8bc 0x2 0x1
+#define MX6QDL_PAD_EIM_A18__GPIO2_IO20 0x0ec 0x400 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_A18__SRC_BOOT_CFG18 0x0ec 0x400 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_A17__EIM_ADDR17 0x0f0 0x404 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_A17__IPU1_DISP1_DATA12 0x0f0 0x404 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_A17__IPU2_CSI1_DATA12 0x0f0 0x404 0x8b8 0x2 0x1
+#define MX6QDL_PAD_EIM_A17__GPIO2_IO21 0x0f0 0x404 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_A17__SRC_BOOT_CFG17 0x0f0 0x404 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_A16__EIM_ADDR16 0x0f4 0x408 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_A16__IPU1_DI1_DISP_CLK 0x0f4 0x408 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_A16__IPU2_CSI1_PIXCLK 0x0f4 0x408 0x8e0 0x2 0x1
+#define MX6QDL_PAD_EIM_A16__GPIO2_IO22 0x0f4 0x408 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_A16__SRC_BOOT_CFG16 0x0f4 0x408 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_CS0__EIM_CS0_B 0x0f8 0x40c 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_CS0__IPU1_DI1_PIN05 0x0f8 0x40c 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_CS0__ECSPI2_SCLK 0x0f8 0x40c 0x810 0x2 0x0
+#define MX6QDL_PAD_EIM_CS0__GPIO2_IO23 0x0f8 0x40c 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_CS1__EIM_CS1_B 0x0fc 0x410 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_CS1__IPU1_DI1_PIN06 0x0fc 0x410 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_CS1__ECSPI2_MOSI 0x0fc 0x410 0x818 0x2 0x0
+#define MX6QDL_PAD_EIM_CS1__GPIO2_IO24 0x0fc 0x410 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_OE__EIM_OE_B 0x100 0x414 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_OE__IPU1_DI1_PIN07 0x100 0x414 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_OE__ECSPI2_MISO 0x100 0x414 0x814 0x2 0x0
+#define MX6QDL_PAD_EIM_OE__GPIO2_IO25 0x100 0x414 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_RW__EIM_RW 0x104 0x418 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_RW__IPU1_DI1_PIN08 0x104 0x418 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_RW__ECSPI2_SS0 0x104 0x418 0x81c 0x2 0x0
+#define MX6QDL_PAD_EIM_RW__GPIO2_IO26 0x104 0x418 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_RW__SRC_BOOT_CFG29 0x104 0x418 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_LBA__EIM_LBA_B 0x108 0x41c 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_LBA__IPU1_DI1_PIN17 0x108 0x41c 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_LBA__ECSPI2_SS1 0x108 0x41c 0x820 0x2 0x0
+#define MX6QDL_PAD_EIM_LBA__GPIO2_IO27 0x108 0x41c 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_LBA__SRC_BOOT_CFG26 0x108 0x41c 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_EB0__EIM_EB0_B 0x10c 0x420 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_EB0__IPU1_DISP1_DATA11 0x10c 0x420 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_EB0__IPU2_CSI1_DATA11 0x10c 0x420 0x8b4 0x2 0x1
+#define MX6QDL_PAD_EIM_EB0__CCM_PMIC_READY 0x10c 0x420 0x7f0 0x4 0x0
+#define MX6QDL_PAD_EIM_EB0__GPIO2_IO28 0x10c 0x420 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_EB0__SRC_BOOT_CFG27 0x10c 0x420 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_EB1__EIM_EB1_B 0x110 0x424 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_EB1__IPU1_DISP1_DATA10 0x110 0x424 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_EB1__IPU2_CSI1_DATA10 0x110 0x424 0x8b0 0x2 0x1
+#define MX6QDL_PAD_EIM_EB1__GPIO2_IO29 0x110 0x424 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_EB1__SRC_BOOT_CFG28 0x110 0x424 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_DA0__EIM_AD00 0x114 0x428 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_DA0__IPU1_DISP1_DATA09 0x114 0x428 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_DA0__IPU2_CSI1_DATA09 0x114 0x428 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_DA0__GPIO3_IO00 0x114 0x428 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_DA0__SRC_BOOT_CFG00 0x114 0x428 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_DA1__EIM_AD01 0x118 0x42c 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_DA1__IPU1_DISP1_DATA08 0x118 0x42c 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_DA1__IPU2_CSI1_DATA08 0x118 0x42c 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_DA1__GPIO3_IO01 0x118 0x42c 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_DA1__SRC_BOOT_CFG01 0x118 0x42c 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_DA2__EIM_AD02 0x11c 0x430 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_DA2__IPU1_DISP1_DATA07 0x11c 0x430 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_DA2__IPU2_CSI1_DATA07 0x11c 0x430 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_DA2__GPIO3_IO02 0x11c 0x430 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_DA2__SRC_BOOT_CFG02 0x11c 0x430 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_DA3__EIM_AD03 0x120 0x434 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_DA3__IPU1_DISP1_DATA06 0x120 0x434 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_DA3__IPU2_CSI1_DATA06 0x120 0x434 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_DA3__GPIO3_IO03 0x120 0x434 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_DA3__SRC_BOOT_CFG03 0x120 0x434 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_DA4__EIM_AD04 0x124 0x438 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_DA4__IPU1_DISP1_DATA05 0x124 0x438 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_DA4__IPU2_CSI1_DATA05 0x124 0x438 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_DA4__GPIO3_IO04 0x124 0x438 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_DA4__SRC_BOOT_CFG04 0x124 0x438 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_DA5__EIM_AD05 0x128 0x43c 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_DA5__IPU1_DISP1_DATA04 0x128 0x43c 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_DA5__IPU2_CSI1_DATA04 0x128 0x43c 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_DA5__GPIO3_IO05 0x128 0x43c 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_DA5__SRC_BOOT_CFG05 0x128 0x43c 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_DA6__EIM_AD06 0x12c 0x440 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_DA6__IPU1_DISP1_DATA03 0x12c 0x440 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_DA6__IPU2_CSI1_DATA03 0x12c 0x440 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_DA6__GPIO3_IO06 0x12c 0x440 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_DA6__SRC_BOOT_CFG06 0x12c 0x440 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_DA7__EIM_AD07 0x130 0x444 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_DA7__IPU1_DISP1_DATA02 0x130 0x444 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_DA7__IPU2_CSI1_DATA02 0x130 0x444 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_DA7__GPIO3_IO07 0x130 0x444 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_DA7__SRC_BOOT_CFG07 0x130 0x444 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_DA8__EIM_AD08 0x134 0x448 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_DA8__IPU1_DISP1_DATA01 0x134 0x448 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_DA8__IPU2_CSI1_DATA01 0x134 0x448 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_DA8__GPIO3_IO08 0x134 0x448 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_DA8__SRC_BOOT_CFG08 0x134 0x448 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_DA9__EIM_AD09 0x138 0x44c 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_DA9__IPU1_DISP1_DATA00 0x138 0x44c 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_DA9__IPU2_CSI1_DATA00 0x138 0x44c 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_DA9__GPIO3_IO09 0x138 0x44c 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_DA9__SRC_BOOT_CFG09 0x138 0x44c 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_DA10__EIM_AD10 0x13c 0x450 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_DA10__IPU1_DI1_PIN15 0x13c 0x450 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_DA10__IPU2_CSI1_DATA_EN 0x13c 0x450 0x8d8 0x2 0x1
+#define MX6QDL_PAD_EIM_DA10__GPIO3_IO10 0x13c 0x450 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_DA10__SRC_BOOT_CFG10 0x13c 0x450 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_DA11__EIM_AD11 0x140 0x454 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_DA11__IPU1_DI1_PIN02 0x140 0x454 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_DA11__IPU2_CSI1_HSYNC 0x140 0x454 0x8dc 0x2 0x1
+#define MX6QDL_PAD_EIM_DA11__GPIO3_IO11 0x140 0x454 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_DA11__SRC_BOOT_CFG11 0x140 0x454 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_DA12__EIM_AD12 0x144 0x458 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_DA12__IPU1_DI1_PIN03 0x144 0x458 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_DA12__IPU2_CSI1_VSYNC 0x144 0x458 0x8e4 0x2 0x1
+#define MX6QDL_PAD_EIM_DA12__GPIO3_IO12 0x144 0x458 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_DA12__SRC_BOOT_CFG12 0x144 0x458 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_DA13__EIM_AD13 0x148 0x45c 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_DA13__IPU1_DI1_D0_CS 0x148 0x45c 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_DA13__GPIO3_IO13 0x148 0x45c 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_DA13__SRC_BOOT_CFG13 0x148 0x45c 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_DA14__EIM_AD14 0x14c 0x460 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_DA14__IPU1_DI1_D1_CS 0x14c 0x460 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_DA14__GPIO3_IO14 0x14c 0x460 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_DA14__SRC_BOOT_CFG14 0x14c 0x460 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_DA15__EIM_AD15 0x150 0x464 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_DA15__IPU1_DI1_PIN01 0x150 0x464 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_DA15__IPU1_DI1_PIN04 0x150 0x464 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_DA15__GPIO3_IO15 0x150 0x464 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_DA15__SRC_BOOT_CFG15 0x150 0x464 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_WAIT__EIM_WAIT_B 0x154 0x468 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_WAIT__EIM_DTACK_B 0x154 0x468 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_WAIT__GPIO5_IO00 0x154 0x468 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_WAIT__SRC_BOOT_CFG25 0x154 0x468 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_BCLK__EIM_BCLK 0x158 0x46c 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_BCLK__IPU1_DI1_PIN16 0x158 0x46c 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_BCLK__GPIO6_IO31 0x158 0x46c 0x000 0x5 0x0
+#define MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x15c 0x470 0x000 0x0 0x0
+#define MX6QDL_PAD_DI0_DISP_CLK__IPU2_DI0_DISP_CLK 0x15c 0x470 0x000 0x1 0x0
+#define MX6QDL_PAD_DI0_DISP_CLK__GPIO4_IO16 0x15c 0x470 0x000 0x5 0x0
+#define MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15 0x160 0x474 0x000 0x0 0x0
+#define MX6QDL_PAD_DI0_PIN15__IPU2_DI0_PIN15 0x160 0x474 0x000 0x1 0x0
+#define MX6QDL_PAD_DI0_PIN15__AUD6_TXC 0x160 0x474 0x000 0x2 0x0
+#define MX6QDL_PAD_DI0_PIN15__GPIO4_IO17 0x160 0x474 0x000 0x5 0x0
+#define MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02 0x164 0x478 0x000 0x0 0x0
+#define MX6QDL_PAD_DI0_PIN2__IPU2_DI0_PIN02 0x164 0x478 0x000 0x1 0x0
+#define MX6QDL_PAD_DI0_PIN2__AUD6_TXD 0x164 0x478 0x000 0x2 0x0
+#define MX6QDL_PAD_DI0_PIN2__GPIO4_IO18 0x164 0x478 0x000 0x5 0x0
+#define MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03 0x168 0x47c 0x000 0x0 0x0
+#define MX6QDL_PAD_DI0_PIN3__IPU2_DI0_PIN03 0x168 0x47c 0x000 0x1 0x0
+#define MX6QDL_PAD_DI0_PIN3__AUD6_TXFS 0x168 0x47c 0x000 0x2 0x0
+#define MX6QDL_PAD_DI0_PIN3__GPIO4_IO19 0x168 0x47c 0x000 0x5 0x0
+#define MX6QDL_PAD_DI0_PIN4__IPU1_DI0_PIN04 0x16c 0x480 0x000 0x0 0x0
+#define MX6QDL_PAD_DI0_PIN4__IPU2_DI0_PIN04 0x16c 0x480 0x000 0x1 0x0
+#define MX6QDL_PAD_DI0_PIN4__AUD6_RXD 0x16c 0x480 0x000 0x2 0x0
+#define MX6QDL_PAD_DI0_PIN4__SD1_WP 0x16c 0x480 0x94c 0x3 0x0
+#define MX6QDL_PAD_DI0_PIN4__GPIO4_IO20 0x16c 0x480 0x000 0x5 0x0
+#define MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00 0x170 0x484 0x000 0x0 0x0
+#define MX6QDL_PAD_DISP0_DAT0__IPU2_DISP0_DATA00 0x170 0x484 0x000 0x1 0x0
+#define MX6QDL_PAD_DISP0_DAT0__ECSPI3_SCLK 0x170 0x484 0x000 0x2 0x0
+#define MX6QDL_PAD_DISP0_DAT0__GPIO4_IO21 0x170 0x484 0x000 0x5 0x0
+#define MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01 0x174 0x488 0x000 0x0 0x0
+#define MX6QDL_PAD_DISP0_DAT1__IPU2_DISP0_DATA01 0x174 0x488 0x000 0x1 0x0
+#define MX6QDL_PAD_DISP0_DAT1__ECSPI3_MOSI 0x174 0x488 0x000 0x2 0x0
+#define MX6QDL_PAD_DISP0_DAT1__GPIO4_IO22 0x174 0x488 0x000 0x5 0x0
+#define MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02 0x178 0x48c 0x000 0x0 0x0
+#define MX6QDL_PAD_DISP0_DAT2__IPU2_DISP0_DATA02 0x178 0x48c 0x000 0x1 0x0
+#define MX6QDL_PAD_DISP0_DAT2__ECSPI3_MISO 0x178 0x48c 0x000 0x2 0x0
+#define MX6QDL_PAD_DISP0_DAT2__GPIO4_IO23 0x178 0x48c 0x000 0x5 0x0
+#define MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03 0x17c 0x490 0x000 0x0 0x0
+#define MX6QDL_PAD_DISP0_DAT3__IPU2_DISP0_DATA03 0x17c 0x490 0x000 0x1 0x0
+#define MX6QDL_PAD_DISP0_DAT3__ECSPI3_SS0 0x17c 0x490 0x000 0x2 0x0
+#define MX6QDL_PAD_DISP0_DAT3__GPIO4_IO24 0x17c 0x490 0x000 0x5 0x0
+#define MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04 0x180 0x494 0x000 0x0 0x0
+#define MX6QDL_PAD_DISP0_DAT4__IPU2_DISP0_DATA04 0x180 0x494 0x000 0x1 0x0
+#define MX6QDL_PAD_DISP0_DAT4__ECSPI3_SS1 0x180 0x494 0x000 0x2 0x0
+#define MX6QDL_PAD_DISP0_DAT4__GPIO4_IO25 0x180 0x494 0x000 0x5 0x0
+#define MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05 0x184 0x498 0x000 0x0 0x0
+#define MX6QDL_PAD_DISP0_DAT5__IPU2_DISP0_DATA05 0x184 0x498 0x000 0x1 0x0
+#define MX6QDL_PAD_DISP0_DAT5__ECSPI3_SS2 0x184 0x498 0x000 0x2 0x0
+#define MX6QDL_PAD_DISP0_DAT5__AUD6_RXFS 0x184 0x498 0x000 0x3 0x0
+#define MX6QDL_PAD_DISP0_DAT5__GPIO4_IO26 0x184 0x498 0x000 0x5 0x0
+#define MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06 0x188 0x49c 0x000 0x0 0x0
+#define MX6QDL_PAD_DISP0_DAT6__IPU2_DISP0_DATA06 0x188 0x49c 0x000 0x1 0x0
+#define MX6QDL_PAD_DISP0_DAT6__ECSPI3_SS3 0x188 0x49c 0x000 0x2 0x0
+#define MX6QDL_PAD_DISP0_DAT6__AUD6_RXC 0x188 0x49c 0x000 0x3 0x0
+#define MX6QDL_PAD_DISP0_DAT6__GPIO4_IO27 0x188 0x49c 0x000 0x5 0x0
+#define MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07 0x18c 0x4a0 0x000 0x0 0x0
+#define MX6QDL_PAD_DISP0_DAT7__IPU2_DISP0_DATA07 0x18c 0x4a0 0x000 0x1 0x0
+#define MX6QDL_PAD_DISP0_DAT7__ECSPI3_RDY 0x18c 0x4a0 0x000 0x2 0x0
+#define MX6QDL_PAD_DISP0_DAT7__GPIO4_IO28 0x18c 0x4a0 0x000 0x5 0x0
+#define MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08 0x190 0x4a4 0x000 0x0 0x0
+#define MX6QDL_PAD_DISP0_DAT8__IPU2_DISP0_DATA08 0x190 0x4a4 0x000 0x1 0x0
+#define MX6QDL_PAD_DISP0_DAT8__PWM1_OUT 0x190 0x4a4 0x000 0x2 0x0
+#define MX6QDL_PAD_DISP0_DAT8__WDOG1_B 0x190 0x4a4 0x000 0x3 0x0
+#define MX6QDL_PAD_DISP0_DAT8__GPIO4_IO29 0x190 0x4a4 0x000 0x5 0x0
+#define MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09 0x194 0x4a8 0x000 0x0 0x0
+#define MX6QDL_PAD_DISP0_DAT9__IPU2_DISP0_DATA09 0x194 0x4a8 0x000 0x1 0x0
+#define MX6QDL_PAD_DISP0_DAT9__PWM2_OUT 0x194 0x4a8 0x000 0x2 0x0
+#define MX6QDL_PAD_DISP0_DAT9__WDOG2_B 0x194 0x4a8 0x000 0x3 0x0
+#define MX6QDL_PAD_DISP0_DAT9__GPIO4_IO30 0x194 0x4a8 0x000 0x5 0x0
+#define MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10 0x198 0x4ac 0x000 0x0 0x0
+#define MX6QDL_PAD_DISP0_DAT10__IPU2_DISP0_DATA10 0x198 0x4ac 0x000 0x1 0x0
+#define MX6QDL_PAD_DISP0_DAT10__GPIO4_IO31 0x198 0x4ac 0x000 0x5 0x0
+#define MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11 0x19c 0x4b0 0x000 0x0 0x0
+#define MX6QDL_PAD_DISP0_DAT11__IPU2_DISP0_DATA11 0x19c 0x4b0 0x000 0x1 0x0
+#define MX6QDL_PAD_DISP0_DAT11__GPIO5_IO05 0x19c 0x4b0 0x000 0x5 0x0
+#define MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12 0x1a0 0x4b4 0x000 0x0 0x0
+#define MX6QDL_PAD_DISP0_DAT12__IPU2_DISP0_DATA12 0x1a0 0x4b4 0x000 0x1 0x0
+#define MX6QDL_PAD_DISP0_DAT12__GPIO5_IO06 0x1a0 0x4b4 0x000 0x5 0x0
+#define MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13 0x1a4 0x4b8 0x000 0x0 0x0
+#define MX6QDL_PAD_DISP0_DAT13__IPU2_DISP0_DATA13 0x1a4 0x4b8 0x000 0x1 0x0
+#define MX6QDL_PAD_DISP0_DAT13__AUD5_RXFS 0x1a4 0x4b8 0x7d8 0x3 0x1
+#define MX6QDL_PAD_DISP0_DAT13__GPIO5_IO07 0x1a4 0x4b8 0x000 0x5 0x0
+#define MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14 0x1a8 0x4bc 0x000 0x0 0x0
+#define MX6QDL_PAD_DISP0_DAT14__IPU2_DISP0_DATA14 0x1a8 0x4bc 0x000 0x1 0x0
+#define MX6QDL_PAD_DISP0_DAT14__AUD5_RXC 0x1a8 0x4bc 0x7d4 0x3 0x1
+#define MX6QDL_PAD_DISP0_DAT14__GPIO5_IO08 0x1a8 0x4bc 0x000 0x5 0x0
+#define MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15 0x1ac 0x4c0 0x000 0x0 0x0
+#define MX6QDL_PAD_DISP0_DAT15__IPU2_DISP0_DATA15 0x1ac 0x4c0 0x000 0x1 0x0
+#define MX6QDL_PAD_DISP0_DAT15__ECSPI1_SS1 0x1ac 0x4c0 0x804 0x2 0x1
+#define MX6QDL_PAD_DISP0_DAT15__ECSPI2_SS1 0x1ac 0x4c0 0x820 0x3 0x1
+#define MX6QDL_PAD_DISP0_DAT15__GPIO5_IO09 0x1ac 0x4c0 0x000 0x5 0x0
+#define MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16 0x1b0 0x4c4 0x000 0x0 0x0
+#define MX6QDL_PAD_DISP0_DAT16__IPU2_DISP0_DATA16 0x1b0 0x4c4 0x000 0x1 0x0
+#define MX6QDL_PAD_DISP0_DAT16__ECSPI2_MOSI 0x1b0 0x4c4 0x818 0x2 0x1
+#define MX6QDL_PAD_DISP0_DAT16__AUD5_TXC 0x1b0 0x4c4 0x7dc 0x3 0x0
+#define MX6QDL_PAD_DISP0_DAT16__SDMA_EXT_EVENT0 0x1b0 0x4c4 0x90c 0x4 0x0
+#define MX6QDL_PAD_DISP0_DAT16__GPIO5_IO10 0x1b0 0x4c4 0x000 0x5 0x0
+#define MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17 0x1b4 0x4c8 0x000 0x0 0x0
+#define MX6QDL_PAD_DISP0_DAT17__IPU2_DISP0_DATA17 0x1b4 0x4c8 0x000 0x1 0x0
+#define MX6QDL_PAD_DISP0_DAT17__ECSPI2_MISO 0x1b4 0x4c8 0x814 0x2 0x1
+#define MX6QDL_PAD_DISP0_DAT17__AUD5_TXD 0x1b4 0x4c8 0x7d0 0x3 0x0
+#define MX6QDL_PAD_DISP0_DAT17__SDMA_EXT_EVENT1 0x1b4 0x4c8 0x910 0x4 0x0
+#define MX6QDL_PAD_DISP0_DAT17__GPIO5_IO11 0x1b4 0x4c8 0x000 0x5 0x0
+#define MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18 0x1b8 0x4cc 0x000 0x0 0x0
+#define MX6QDL_PAD_DISP0_DAT18__IPU2_DISP0_DATA18 0x1b8 0x4cc 0x000 0x1 0x0
+#define MX6QDL_PAD_DISP0_DAT18__ECSPI2_SS0 0x1b8 0x4cc 0x81c 0x2 0x1
+#define MX6QDL_PAD_DISP0_DAT18__AUD5_TXFS 0x1b8 0x4cc 0x7e0 0x3 0x0
+#define MX6QDL_PAD_DISP0_DAT18__AUD4_RXFS 0x1b8 0x4cc 0x7c0 0x4 0x0
+#define MX6QDL_PAD_DISP0_DAT18__GPIO5_IO12 0x1b8 0x4cc 0x000 0x5 0x0
+#define MX6QDL_PAD_DISP0_DAT18__EIM_CS2_B 0x1b8 0x4cc 0x000 0x7 0x0
+#define MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19 0x1bc 0x4d0 0x000 0x0 0x0
+#define MX6QDL_PAD_DISP0_DAT19__IPU2_DISP0_DATA19 0x1bc 0x4d0 0x000 0x1 0x0
+#define MX6QDL_PAD_DISP0_DAT19__ECSPI2_SCLK 0x1bc 0x4d0 0x810 0x2 0x1
+#define MX6QDL_PAD_DISP0_DAT19__AUD5_RXD 0x1bc 0x4d0 0x7cc 0x3 0x0
+#define MX6QDL_PAD_DISP0_DAT19__AUD4_RXC 0x1bc 0x4d0 0x7bc 0x4 0x0
+#define MX6QDL_PAD_DISP0_DAT19__GPIO5_IO13 0x1bc 0x4d0 0x000 0x5 0x0
+#define MX6QDL_PAD_DISP0_DAT19__EIM_CS3_B 0x1bc 0x4d0 0x000 0x7 0x0
+#define MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20 0x1c0 0x4d4 0x000 0x0 0x0
+#define MX6QDL_PAD_DISP0_DAT20__IPU2_DISP0_DATA20 0x1c0 0x4d4 0x000 0x1 0x0
+#define MX6QDL_PAD_DISP0_DAT20__ECSPI1_SCLK 0x1c0 0x4d4 0x7f4 0x2 0x1
+#define MX6QDL_PAD_DISP0_DAT20__AUD4_TXC 0x1c0 0x4d4 0x7c4 0x3 0x0
+#define MX6QDL_PAD_DISP0_DAT20__GPIO5_IO14 0x1c0 0x4d4 0x000 0x5 0x0
+#define MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21 0x1c4 0x4d8 0x000 0x0 0x0
+#define MX6QDL_PAD_DISP0_DAT21__IPU2_DISP0_DATA21 0x1c4 0x4d8 0x000 0x1 0x0
+#define MX6QDL_PAD_DISP0_DAT21__ECSPI1_MOSI 0x1c4 0x4d8 0x7fc 0x2 0x1
+#define MX6QDL_PAD_DISP0_DAT21__AUD4_TXD 0x1c4 0x4d8 0x7b8 0x3 0x1
+#define MX6QDL_PAD_DISP0_DAT21__GPIO5_IO15 0x1c4 0x4d8 0x000 0x5 0x0
+#define MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22 0x1c8 0x4dc 0x000 0x0 0x0
+#define MX6QDL_PAD_DISP0_DAT22__IPU2_DISP0_DATA22 0x1c8 0x4dc 0x000 0x1 0x0
+#define MX6QDL_PAD_DISP0_DAT22__ECSPI1_MISO 0x1c8 0x4dc 0x7f8 0x2 0x1
+#define MX6QDL_PAD_DISP0_DAT22__AUD4_TXFS 0x1c8 0x4dc 0x7c8 0x3 0x1
+#define MX6QDL_PAD_DISP0_DAT22__GPIO5_IO16 0x1c8 0x4dc 0x000 0x5 0x0
+#define MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23 0x1cc 0x4e0 0x000 0x0 0x0
+#define MX6QDL_PAD_DISP0_DAT23__IPU2_DISP0_DATA23 0x1cc 0x4e0 0x000 0x1 0x0
+#define MX6QDL_PAD_DISP0_DAT23__ECSPI1_SS0 0x1cc 0x4e0 0x800 0x2 0x1
+#define MX6QDL_PAD_DISP0_DAT23__AUD4_RXD 0x1cc 0x4e0 0x7b4 0x3 0x1
+#define MX6QDL_PAD_DISP0_DAT23__GPIO5_IO17 0x1cc 0x4e0 0x000 0x5 0x0
+#define MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1d0 0x4e4 0x840 0x1 0x0
+#define MX6QDL_PAD_ENET_MDIO__ESAI_RX_CLK 0x1d0 0x4e4 0x86c 0x2 0x0
+#define MX6QDL_PAD_ENET_MDIO__ENET_1588_EVENT1_OUT 0x1d0 0x4e4 0x000 0x4 0x0
+#define MX6QDL_PAD_ENET_MDIO__GPIO1_IO22 0x1d0 0x4e4 0x000 0x5 0x0
+#define MX6QDL_PAD_ENET_MDIO__SPDIF_LOCK 0x1d0 0x4e4 0x000 0x6 0x0
+#define MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1d4 0x4e8 0x000 0x1 0x0
+#define MX6QDL_PAD_ENET_REF_CLK__ESAI_RX_FS 0x1d4 0x4e8 0x85c 0x2 0x0
+#define MX6QDL_PAD_ENET_REF_CLK__GPIO1_IO23 0x1d4 0x4e8 0x000 0x5 0x0
+#define MX6QDL_PAD_ENET_REF_CLK__SPDIF_SR_CLK 0x1d4 0x4e8 0x000 0x6 0x0
+#define MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID 0x1d8 0x4ec 0x000 0x0 0x0
+#define MX6QDL_PAD_ENET_RX_ER__ENET_RX_ER 0x1d8 0x4ec 0x000 0x1 0x0
+#define MX6QDL_PAD_ENET_RX_ER__ESAI_RX_HF_CLK 0x1d8 0x4ec 0x864 0x2 0x0
+#define MX6QDL_PAD_ENET_RX_ER__SPDIF_IN 0x1d8 0x4ec 0x914 0x3 0x1
+#define MX6QDL_PAD_ENET_RX_ER__ENET_1588_EVENT2_OUT 0x1d8 0x4ec 0x000 0x4 0x0
+#define MX6QDL_PAD_ENET_RX_ER__GPIO1_IO24 0x1d8 0x4ec 0x000 0x5 0x0
+#define MX6QDL_PAD_ENET_CRS_DV__ENET_RX_EN 0x1dc 0x4f0 0x858 0x1 0x1
+#define MX6QDL_PAD_ENET_CRS_DV__ESAI_TX_CLK 0x1dc 0x4f0 0x870 0x2 0x0
+#define MX6QDL_PAD_ENET_CRS_DV__SPDIF_EXT_CLK 0x1dc 0x4f0 0x918 0x3 0x1
+#define MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25 0x1dc 0x4f0 0x000 0x5 0x0
+#define MX6QDL_PAD_ENET_RXD1__MLB_SIG 0x1e0 0x4f4 0x908 0x0 0x0
+#define MX6QDL_PAD_ENET_RXD1__ENET_RX_DATA1 0x1e0 0x4f4 0x84c 0x1 0x1
+#define MX6QDL_PAD_ENET_RXD1__ESAI_TX_FS 0x1e0 0x4f4 0x860 0x2 0x0
+#define MX6QDL_PAD_ENET_RXD1__ENET_1588_EVENT3_OUT 0x1e0 0x4f4 0x000 0x4 0x0
+#define MX6QDL_PAD_ENET_RXD1__GPIO1_IO26 0x1e0 0x4f4 0x000 0x5 0x0
+#define MX6QDL_PAD_ENET_RXD0__ENET_RX_DATA0 0x1e4 0x4f8 0x848 0x1 0x1
+#define MX6QDL_PAD_ENET_RXD0__ESAI_TX_HF_CLK 0x1e4 0x4f8 0x868 0x2 0x0
+#define MX6QDL_PAD_ENET_RXD0__SPDIF_OUT 0x1e4 0x4f8 0x000 0x3 0x0
+#define MX6QDL_PAD_ENET_RXD0__GPIO1_IO27 0x1e4 0x4f8 0x000 0x5 0x0
+#define MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN 0x1e8 0x4fc 0x000 0x1 0x0
+#define MX6QDL_PAD_ENET_TX_EN__ESAI_TX3_RX2 0x1e8 0x4fc 0x880 0x2 0x0
+#define MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x1e8 0x4fc 0x000 0x5 0x0
+#define MX6QDL_PAD_ENET_TXD1__MLB_CLK 0x1ec 0x500 0x900 0x0 0x0
+#define MX6QDL_PAD_ENET_TXD1__ENET_TX_DATA1 0x1ec 0x500 0x000 0x1 0x0
+#define MX6QDL_PAD_ENET_TXD1__ESAI_TX2_RX3 0x1ec 0x500 0x87c 0x2 0x0
+#define MX6QDL_PAD_ENET_TXD1__ENET_1588_EVENT0_IN 0x1ec 0x500 0x000 0x4 0x0
+#define MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x1ec 0x500 0x000 0x5 0x0
+#define MX6QDL_PAD_ENET_TXD0__ENET_TX_DATA0 0x1f0 0x504 0x000 0x1 0x0
+#define MX6QDL_PAD_ENET_TXD0__ESAI_TX4_RX1 0x1f0 0x504 0x884 0x2 0x0
+#define MX6QDL_PAD_ENET_TXD0__GPIO1_IO30 0x1f0 0x504 0x000 0x5 0x0
+#define MX6QDL_PAD_ENET_MDC__MLB_DATA 0x1f4 0x508 0x904 0x0 0x0
+#define MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1f4 0x508 0x000 0x1 0x0
+#define MX6QDL_PAD_ENET_MDC__ESAI_TX5_RX0 0x1f4 0x508 0x888 0x2 0x0
+#define MX6QDL_PAD_ENET_MDC__ENET_1588_EVENT1_IN 0x1f4 0x508 0x000 0x4 0x0
+#define MX6QDL_PAD_ENET_MDC__GPIO1_IO31 0x1f4 0x508 0x000 0x5 0x0
+#define MX6QDL_PAD_KEY_COL0__ECSPI1_SCLK 0x1f8 0x5c8 0x7f4 0x0 0x2
+#define MX6QDL_PAD_KEY_COL0__ENET_RX_DATA3 0x1f8 0x5c8 0x854 0x1 0x1
+#define MX6QDL_PAD_KEY_COL0__AUD5_TXC 0x1f8 0x5c8 0x7dc 0x2 0x1
+#define MX6QDL_PAD_KEY_COL0__KEY_COL0 0x1f8 0x5c8 0x000 0x3 0x0
+#define MX6QDL_PAD_KEY_COL0__UART4_TX_DATA 0x1f8 0x5c8 0x000 0x4 0x0
+#define MX6QDL_PAD_KEY_COL0__UART4_RX_DATA 0x1f8 0x5c8 0x938 0x4 0x0
+#define MX6QDL_PAD_KEY_COL0__GPIO4_IO06 0x1f8 0x5c8 0x000 0x5 0x0
+#define MX6QDL_PAD_KEY_COL0__DCIC1_OUT 0x1f8 0x5c8 0x000 0x6 0x0
+#define MX6QDL_PAD_KEY_ROW0__ECSPI1_MOSI 0x1fc 0x5cc 0x7fc 0x0 0x2
+#define MX6QDL_PAD_KEY_ROW0__ENET_TX_DATA3 0x1fc 0x5cc 0x000 0x1 0x0
+#define MX6QDL_PAD_KEY_ROW0__AUD5_TXD 0x1fc 0x5cc 0x7d0 0x2 0x1
+#define MX6QDL_PAD_KEY_ROW0__KEY_ROW0 0x1fc 0x5cc 0x000 0x3 0x0
+#define MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA 0x1fc 0x5cc 0x938 0x4 0x1
+#define MX6QDL_PAD_KEY_ROW0__UART4_TX_DATA 0x1fc 0x5cc 0x000 0x4 0x0
+#define MX6QDL_PAD_KEY_ROW0__GPIO4_IO07 0x1fc 0x5cc 0x000 0x5 0x0
+#define MX6QDL_PAD_KEY_ROW0__DCIC2_OUT 0x1fc 0x5cc 0x000 0x6 0x0
+#define MX6QDL_PAD_KEY_COL1__ECSPI1_MISO 0x200 0x5d0 0x7f8 0x0 0x2
+#define MX6QDL_PAD_KEY_COL1__ENET_MDIO 0x200 0x5d0 0x840 0x1 0x1
+#define MX6QDL_PAD_KEY_COL1__AUD5_TXFS 0x200 0x5d0 0x7e0 0x2 0x1
+#define MX6QDL_PAD_KEY_COL1__KEY_COL1 0x200 0x5d0 0x000 0x3 0x0
+#define MX6QDL_PAD_KEY_COL1__UART5_TX_DATA 0x200 0x5d0 0x000 0x4 0x0
+#define MX6QDL_PAD_KEY_COL1__UART5_RX_DATA 0x200 0x5d0 0x940 0x4 0x0
+#define MX6QDL_PAD_KEY_COL1__GPIO4_IO08 0x200 0x5d0 0x000 0x5 0x0
+#define MX6QDL_PAD_KEY_COL1__SD1_VSELECT 0x200 0x5d0 0x000 0x6 0x0
+#define MX6QDL_PAD_KEY_ROW1__ECSPI1_SS0 0x204 0x5d4 0x800 0x0 0x2
+#define MX6QDL_PAD_KEY_ROW1__ENET_COL 0x204 0x5d4 0x000 0x1 0x0
+#define MX6QDL_PAD_KEY_ROW1__AUD5_RXD 0x204 0x5d4 0x7cc 0x2 0x1
+#define MX6QDL_PAD_KEY_ROW1__KEY_ROW1 0x204 0x5d4 0x000 0x3 0x0
+#define MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA 0x204 0x5d4 0x940 0x4 0x1
+#define MX6QDL_PAD_KEY_ROW1__UART5_TX_DATA 0x204 0x5d4 0x000 0x4 0x0
+#define MX6QDL_PAD_KEY_ROW1__GPIO4_IO09 0x204 0x5d4 0x000 0x5 0x0
+#define MX6QDL_PAD_KEY_ROW1__SD2_VSELECT 0x204 0x5d4 0x000 0x6 0x0
+#define MX6QDL_PAD_KEY_COL2__ECSPI1_SS1 0x208 0x5d8 0x804 0x0 0x2
+#define MX6QDL_PAD_KEY_COL2__ENET_RX_DATA2 0x208 0x5d8 0x850 0x1 0x1
+#define MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX 0x208 0x5d8 0x000 0x2 0x0
+#define MX6QDL_PAD_KEY_COL2__KEY_COL2 0x208 0x5d8 0x000 0x3 0x0
+#define MX6QDL_PAD_KEY_COL2__ENET_MDC 0x208 0x5d8 0x000 0x4 0x0
+#define MX6QDL_PAD_KEY_COL2__GPIO4_IO10 0x208 0x5d8 0x000 0x5 0x0
+#define MX6QDL_PAD_KEY_COL2__USB_H1_PWR_CTL_WAKE 0x208 0x5d8 0x000 0x6 0x0
+#define MX6QDL_PAD_KEY_ROW2__ECSPI1_SS2 0x20c 0x5dc 0x808 0x0 0x1
+#define MX6QDL_PAD_KEY_ROW2__ENET_TX_DATA2 0x20c 0x5dc 0x000 0x1 0x0
+#define MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX 0x20c 0x5dc 0x7e4 0x2 0x0
+#define MX6QDL_PAD_KEY_ROW2__KEY_ROW2 0x20c 0x5dc 0x000 0x3 0x0
+#define MX6QDL_PAD_KEY_ROW2__SD2_VSELECT 0x20c 0x5dc 0x000 0x4 0x0
+#define MX6QDL_PAD_KEY_ROW2__GPIO4_IO11 0x20c 0x5dc 0x000 0x5 0x0
+#define MX6QDL_PAD_KEY_ROW2__HDMI_TX_CEC_LINE 0x20c 0x5dc 0x88c 0x6 0x1
+#define MX6QDL_PAD_KEY_COL3__ECSPI1_SS3 0x210 0x5e0 0x80c 0x0 0x1
+#define MX6QDL_PAD_KEY_COL3__ENET_CRS 0x210 0x5e0 0x000 0x1 0x0
+#define MX6QDL_PAD_KEY_COL3__HDMI_TX_DDC_SCL 0x210 0x5e0 0x890 0x2 0x1
+#define MX6QDL_PAD_KEY_COL3__KEY_COL3 0x210 0x5e0 0x000 0x3 0x0
+#define MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x210 0x5e0 0x8a0 0x4 0x1
+#define MX6QDL_PAD_KEY_COL3__GPIO4_IO12 0x210 0x5e0 0x000 0x5 0x0
+#define MX6QDL_PAD_KEY_COL3__SPDIF_IN 0x210 0x5e0 0x914 0x6 0x2
+#define MX6QDL_PAD_KEY_ROW3__ASRC_EXT_CLK 0x214 0x5e4 0x7b0 0x1 0x0
+#define MX6QDL_PAD_KEY_ROW3__HDMI_TX_DDC_SDA 0x214 0x5e4 0x894 0x2 0x1
+#define MX6QDL_PAD_KEY_ROW3__KEY_ROW3 0x214 0x5e4 0x000 0x3 0x0
+#define MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x214 0x5e4 0x8a4 0x4 0x1
+#define MX6QDL_PAD_KEY_ROW3__GPIO4_IO13 0x214 0x5e4 0x000 0x5 0x0
+#define MX6QDL_PAD_KEY_ROW3__SD1_VSELECT 0x214 0x5e4 0x000 0x6 0x0
+#define MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX 0x218 0x5e8 0x000 0x0 0x0
+#define MX6QDL_PAD_KEY_COL4__IPU1_SISG4 0x218 0x5e8 0x000 0x1 0x0
+#define MX6QDL_PAD_KEY_COL4__USB_OTG_OC 0x218 0x5e8 0x944 0x2 0x1
+#define MX6QDL_PAD_KEY_COL4__KEY_COL4 0x218 0x5e8 0x000 0x3 0x0
+#define MX6QDL_PAD_KEY_COL4__UART5_RTS_B 0x218 0x5e8 0x93c 0x4 0x0
+#define MX6QDL_PAD_KEY_COL4__UART5_CTS_B 0x218 0x5e8 0x000 0x4 0x0
+#define MX6QDL_PAD_KEY_COL4__GPIO4_IO14 0x218 0x5e8 0x000 0x5 0x0
+#define MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX 0x21c 0x5ec 0x7e8 0x0 0x0
+#define MX6QDL_PAD_KEY_ROW4__IPU1_SISG5 0x21c 0x5ec 0x000 0x1 0x0
+#define MX6QDL_PAD_KEY_ROW4__USB_OTG_PWR 0x21c 0x5ec 0x000 0x2 0x0
+#define MX6QDL_PAD_KEY_ROW4__KEY_ROW4 0x21c 0x5ec 0x000 0x3 0x0
+#define MX6QDL_PAD_KEY_ROW4__UART5_CTS_B 0x21c 0x5ec 0x000 0x4 0x0
+#define MX6QDL_PAD_KEY_ROW4__UART5_RTS_B 0x21c 0x5ec 0x93c 0x4 0x1
+#define MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x21c 0x5ec 0x000 0x5 0x0
+#define MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x220 0x5f0 0x000 0x0 0x0
+#define MX6QDL_PAD_GPIO_0__KEY_COL5 0x220 0x5f0 0x8e8 0x2 0x0
+#define MX6QDL_PAD_GPIO_0__ASRC_EXT_CLK 0x220 0x5f0 0x7b0 0x3 0x1
+#define MX6QDL_PAD_GPIO_0__EPIT1_OUT 0x220 0x5f0 0x000 0x4 0x0
+#define MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x220 0x5f0 0x000 0x5 0x0
+#define MX6QDL_PAD_GPIO_0__USB_H1_PWR 0x220 0x5f0 0x000 0x6 0x0
+#define MX6QDL_PAD_GPIO_0__SNVS_VIO_5 0x220 0x5f0 0x000 0x7 0x0
+#define MX6QDL_PAD_GPIO_1__ESAI_RX_CLK 0x224 0x5f4 0x86c 0x0 0x1
+#define MX6QDL_PAD_GPIO_1__WDOG2_B 0x224 0x5f4 0x000 0x1 0x0
+#define MX6QDL_PAD_GPIO_1__KEY_ROW5 0x224 0x5f4 0x8f4 0x2 0x0
+#define MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x224 0x5f4 0x000 0x3 0x0
+#define MX6QDL_PAD_GPIO_1__PWM2_OUT 0x224 0x5f4 0x000 0x4 0x0
+#define MX6QDL_PAD_GPIO_1__GPIO1_IO01 0x224 0x5f4 0x000 0x5 0x0
+#define MX6QDL_PAD_GPIO_1__SD1_CD_B 0x224 0x5f4 0x000 0x6 0x0
+#define MX6QDL_PAD_GPIO_9__ESAI_RX_FS 0x228 0x5f8 0x85c 0x0 0x1
+#define MX6QDL_PAD_GPIO_9__WDOG1_B 0x228 0x5f8 0x000 0x1 0x0
+#define MX6QDL_PAD_GPIO_9__KEY_COL6 0x228 0x5f8 0x8ec 0x2 0x0
+#define MX6QDL_PAD_GPIO_9__CCM_REF_EN_B 0x228 0x5f8 0x000 0x3 0x0
+#define MX6QDL_PAD_GPIO_9__PWM1_OUT 0x228 0x5f8 0x000 0x4 0x0
+#define MX6QDL_PAD_GPIO_9__GPIO1_IO09 0x228 0x5f8 0x000 0x5 0x0
+#define MX6QDL_PAD_GPIO_9__SD1_WP 0x228 0x5f8 0x94c 0x6 0x1
+#define MX6QDL_PAD_GPIO_3__ESAI_RX_HF_CLK 0x22c 0x5fc 0x864 0x0 0x1
+#define MX6QDL_PAD_GPIO_3__I2C3_SCL 0x22c 0x5fc 0x8a8 0x2 0x1
+#define MX6QDL_PAD_GPIO_3__XTALOSC_REF_CLK_24M 0x22c 0x5fc 0x000 0x3 0x0
+#define MX6QDL_PAD_GPIO_3__CCM_CLKO2 0x22c 0x5fc 0x000 0x4 0x0
+#define MX6QDL_PAD_GPIO_3__GPIO1_IO03 0x22c 0x5fc 0x000 0x5 0x0
+#define MX6QDL_PAD_GPIO_3__USB_H1_OC 0x22c 0x5fc 0x948 0x6 0x1
+#define MX6QDL_PAD_GPIO_3__MLB_CLK 0x22c 0x5fc 0x900 0x7 0x1
+#define MX6QDL_PAD_GPIO_6__ESAI_TX_CLK 0x230 0x600 0x870 0x0 0x1
+#define MX6QDL_PAD_GPIO_6__I2C3_SDA 0x230 0x600 0x8ac 0x2 0x1
+#define MX6QDL_PAD_GPIO_6__GPIO1_IO06 0x230 0x600 0x000 0x5 0x0
+#define MX6QDL_PAD_GPIO_6__SD2_LCTL 0x230 0x600 0x000 0x6 0x0
+#define MX6QDL_PAD_GPIO_6__MLB_SIG 0x230 0x600 0x908 0x7 0x1
+#define MX6QDL_PAD_GPIO_2__ESAI_TX_FS 0x234 0x604 0x860 0x0 0x1
+#define MX6QDL_PAD_GPIO_2__KEY_ROW6 0x234 0x604 0x8f8 0x2 0x1
+#define MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x234 0x604 0x000 0x5 0x0
+#define MX6QDL_PAD_GPIO_2__SD2_WP 0x234 0x604 0x000 0x6 0x0
+#define MX6QDL_PAD_GPIO_2__MLB_DATA 0x234 0x604 0x904 0x7 0x1
+#define MX6QDL_PAD_GPIO_4__ESAI_TX_HF_CLK 0x238 0x608 0x868 0x0 0x1
+#define MX6QDL_PAD_GPIO_4__KEY_COL7 0x238 0x608 0x8f0 0x2 0x1
+#define MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x238 0x608 0x000 0x5 0x0
+#define MX6QDL_PAD_GPIO_4__SD2_CD_B 0x238 0x608 0x000 0x6 0x0
+#define MX6QDL_PAD_GPIO_5__ESAI_TX2_RX3 0x23c 0x60c 0x87c 0x0 0x1
+#define MX6QDL_PAD_GPIO_5__KEY_ROW7 0x23c 0x60c 0x8fc 0x2 0x1
+#define MX6QDL_PAD_GPIO_5__CCM_CLKO1 0x23c 0x60c 0x000 0x3 0x0
+#define MX6QDL_PAD_GPIO_5__GPIO1_IO05 0x23c 0x60c 0x000 0x5 0x0
+#define MX6QDL_PAD_GPIO_5__I2C3_SCL 0x23c 0x60c 0x8a8 0x6 0x2
+#define MX6QDL_PAD_GPIO_5__ARM_EVENTI 0x23c 0x60c 0x000 0x7 0x0
+#define MX6QDL_PAD_GPIO_7__ESAI_TX4_RX1 0x240 0x610 0x884 0x0 0x1
+#define MX6QDL_PAD_GPIO_7__ECSPI5_RDY 0x240 0x610 0x000 0x1 0x0
+#define MX6QDL_PAD_GPIO_7__EPIT1_OUT 0x240 0x610 0x000 0x2 0x0
+#define MX6QDL_PAD_GPIO_7__FLEXCAN1_TX 0x240 0x610 0x000 0x3 0x0
+#define MX6QDL_PAD_GPIO_7__UART2_TX_DATA 0x240 0x610 0x000 0x4 0x0
+#define MX6QDL_PAD_GPIO_7__UART2_RX_DATA 0x240 0x610 0x928 0x4 0x2
+#define MX6QDL_PAD_GPIO_7__GPIO1_IO07 0x240 0x610 0x000 0x5 0x0
+#define MX6QDL_PAD_GPIO_7__SPDIF_LOCK 0x240 0x610 0x000 0x6 0x0
+#define MX6QDL_PAD_GPIO_7__USB_OTG_HOST_MODE 0x240 0x610 0x000 0x7 0x0
+#define MX6QDL_PAD_GPIO_8__ESAI_TX5_RX0 0x244 0x614 0x888 0x0 0x1
+#define MX6QDL_PAD_GPIO_8__XTALOSC_REF_CLK_32K 0x244 0x614 0x000 0x1 0x0
+#define MX6QDL_PAD_GPIO_8__EPIT2_OUT 0x244 0x614 0x000 0x2 0x0
+#define MX6QDL_PAD_GPIO_8__FLEXCAN1_RX 0x244 0x614 0x7e4 0x3 0x1
+#define MX6QDL_PAD_GPIO_8__UART2_RX_DATA 0x244 0x614 0x928 0x4 0x3
+#define MX6QDL_PAD_GPIO_8__UART2_TX_DATA 0x244 0x614 0x000 0x4 0x0
+#define MX6QDL_PAD_GPIO_8__GPIO1_IO08 0x244 0x614 0x000 0x5 0x0
+#define MX6QDL_PAD_GPIO_8__SPDIF_SR_CLK 0x244 0x614 0x000 0x6 0x0
+#define MX6QDL_PAD_GPIO_8__USB_OTG_PWR_CTL_WAKE 0x244 0x614 0x000 0x7 0x0
+#define MX6QDL_PAD_GPIO_16__ESAI_TX3_RX2 0x248 0x618 0x880 0x0 0x1
+#define MX6QDL_PAD_GPIO_16__ENET_1588_EVENT2_IN 0x248 0x618 0x000 0x1 0x0
+#define MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x248 0x618 0x83c 0x2 0x1
+#define MX6QDL_PAD_GPIO_16__SD1_LCTL 0x248 0x618 0x000 0x3 0x0
+#define MX6QDL_PAD_GPIO_16__SPDIF_IN 0x248 0x618 0x914 0x4 0x3
+#define MX6QDL_PAD_GPIO_16__GPIO7_IO11 0x248 0x618 0x000 0x5 0x0
+#define MX6QDL_PAD_GPIO_16__I2C3_SDA 0x248 0x618 0x8ac 0x6 0x2
+#define MX6QDL_PAD_GPIO_16__JTAG_DE_B 0x248 0x618 0x000 0x7 0x0
+#define MX6QDL_PAD_GPIO_17__ESAI_TX0 0x24c 0x61c 0x874 0x0 0x0
+#define MX6QDL_PAD_GPIO_17__ENET_1588_EVENT3_IN 0x24c 0x61c 0x000 0x1 0x0
+#define MX6QDL_PAD_GPIO_17__CCM_PMIC_READY 0x24c 0x61c 0x7f0 0x2 0x1
+#define MX6QDL_PAD_GPIO_17__SDMA_EXT_EVENT0 0x24c 0x61c 0x90c 0x3 0x1
+#define MX6QDL_PAD_GPIO_17__SPDIF_OUT 0x24c 0x61c 0x000 0x4 0x0
+#define MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x24c 0x61c 0x000 0x5 0x0
+#define MX6QDL_PAD_GPIO_18__ESAI_TX1 0x250 0x620 0x878 0x0 0x0
+#define MX6QDL_PAD_GPIO_18__ENET_RX_CLK 0x250 0x620 0x844 0x1 0x1
+#define MX6QDL_PAD_GPIO_18__SD3_VSELECT 0x250 0x620 0x000 0x2 0x0
+#define MX6QDL_PAD_GPIO_18__SDMA_EXT_EVENT1 0x250 0x620 0x910 0x3 0x1
+#define MX6QDL_PAD_GPIO_18__ASRC_EXT_CLK 0x250 0x620 0x7b0 0x4 0x2
+#define MX6QDL_PAD_GPIO_18__GPIO7_IO13 0x250 0x620 0x000 0x5 0x0
+#define MX6QDL_PAD_GPIO_18__SNVS_VIO_5_CTL 0x250 0x620 0x000 0x6 0x0
+#define MX6QDL_PAD_GPIO_19__KEY_COL5 0x254 0x624 0x8e8 0x0 0x1
+#define MX6QDL_PAD_GPIO_19__ENET_1588_EVENT0_OUT 0x254 0x624 0x000 0x1 0x0
+#define MX6QDL_PAD_GPIO_19__SPDIF_OUT 0x254 0x624 0x000 0x2 0x0
+#define MX6QDL_PAD_GPIO_19__CCM_CLKO1 0x254 0x624 0x000 0x3 0x0
+#define MX6QDL_PAD_GPIO_19__ECSPI1_RDY 0x254 0x624 0x000 0x4 0x0
+#define MX6QDL_PAD_GPIO_19__GPIO4_IO05 0x254 0x624 0x000 0x5 0x0
+#define MX6QDL_PAD_GPIO_19__ENET_TX_ER 0x254 0x624 0x000 0x6 0x0
+#define MX6QDL_PAD_CSI0_PIXCLK__IPU1_CSI0_PIXCLK 0x258 0x628 0x000 0x0 0x0
+#define MX6QDL_PAD_CSI0_PIXCLK__GPIO5_IO18 0x258 0x628 0x000 0x5 0x0
+#define MX6QDL_PAD_CSI0_PIXCLK__ARM_EVENTO 0x258 0x628 0x000 0x7 0x0
+#define MX6QDL_PAD_CSI0_MCLK__IPU1_CSI0_HSYNC 0x25c 0x62c 0x000 0x0 0x0
+#define MX6QDL_PAD_CSI0_MCLK__CCM_CLKO1 0x25c 0x62c 0x000 0x3 0x0
+#define MX6QDL_PAD_CSI0_MCLK__GPIO5_IO19 0x25c 0x62c 0x000 0x5 0x0
+#define MX6QDL_PAD_CSI0_MCLK__ARM_TRACE_CTL 0x25c 0x62c 0x000 0x7 0x0
+#define MX6QDL_PAD_CSI0_DATA_EN__IPU1_CSI0_DATA_EN 0x260 0x630 0x000 0x0 0x0
+#define MX6QDL_PAD_CSI0_DATA_EN__EIM_DATA00 0x260 0x630 0x000 0x1 0x0
+#define MX6QDL_PAD_CSI0_DATA_EN__GPIO5_IO20 0x260 0x630 0x000 0x5 0x0
+#define MX6QDL_PAD_CSI0_DATA_EN__ARM_TRACE_CLK 0x260 0x630 0x000 0x7 0x0
+#define MX6QDL_PAD_CSI0_VSYNC__IPU1_CSI0_VSYNC 0x264 0x634 0x000 0x0 0x0
+#define MX6QDL_PAD_CSI0_VSYNC__EIM_DATA01 0x264 0x634 0x000 0x1 0x0
+#define MX6QDL_PAD_CSI0_VSYNC__GPIO5_IO21 0x264 0x634 0x000 0x5 0x0
+#define MX6QDL_PAD_CSI0_VSYNC__ARM_TRACE00 0x264 0x634 0x000 0x7 0x0
+#define MX6QDL_PAD_CSI0_DAT4__IPU1_CSI0_DATA04 0x268 0x638 0x000 0x0 0x0
+#define MX6QDL_PAD_CSI0_DAT4__EIM_DATA02 0x268 0x638 0x000 0x1 0x0
+#define MX6QDL_PAD_CSI0_DAT4__ECSPI1_SCLK 0x268 0x638 0x7f4 0x2 0x3
+#define MX6QDL_PAD_CSI0_DAT4__KEY_COL5 0x268 0x638 0x8e8 0x3 0x2
+#define MX6QDL_PAD_CSI0_DAT4__AUD3_TXC 0x268 0x638 0x000 0x4 0x0
+#define MX6QDL_PAD_CSI0_DAT4__GPIO5_IO22 0x268 0x638 0x000 0x5 0x0
+#define MX6QDL_PAD_CSI0_DAT4__ARM_TRACE01 0x268 0x638 0x000 0x7 0x0
+#define MX6QDL_PAD_CSI0_DAT5__IPU1_CSI0_DATA05 0x26c 0x63c 0x000 0x0 0x0
+#define MX6QDL_PAD_CSI0_DAT5__EIM_DATA03 0x26c 0x63c 0x000 0x1 0x0
+#define MX6QDL_PAD_CSI0_DAT5__ECSPI1_MOSI 0x26c 0x63c 0x7fc 0x2 0x3
+#define MX6QDL_PAD_CSI0_DAT5__KEY_ROW5 0x26c 0x63c 0x8f4 0x3 0x1
+#define MX6QDL_PAD_CSI0_DAT5__AUD3_TXD 0x26c 0x63c 0x000 0x4 0x0
+#define MX6QDL_PAD_CSI0_DAT5__GPIO5_IO23 0x26c 0x63c 0x000 0x5 0x0
+#define MX6QDL_PAD_CSI0_DAT5__ARM_TRACE02 0x26c 0x63c 0x000 0x7 0x0
+#define MX6QDL_PAD_CSI0_DAT6__IPU1_CSI0_DATA06 0x270 0x640 0x000 0x0 0x0
+#define MX6QDL_PAD_CSI0_DAT6__EIM_DATA04 0x270 0x640 0x000 0x1 0x0
+#define MX6QDL_PAD_CSI0_DAT6__ECSPI1_MISO 0x270 0x640 0x7f8 0x2 0x3
+#define MX6QDL_PAD_CSI0_DAT6__KEY_COL6 0x270 0x640 0x8ec 0x3 0x1
+#define MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS 0x270 0x640 0x000 0x4 0x0
+#define MX6QDL_PAD_CSI0_DAT6__GPIO5_IO24 0x270 0x640 0x000 0x5 0x0
+#define MX6QDL_PAD_CSI0_DAT6__ARM_TRACE03 0x270 0x640 0x000 0x7 0x0
+#define MX6QDL_PAD_CSI0_DAT7__IPU1_CSI0_DATA07 0x274 0x644 0x000 0x0 0x0
+#define MX6QDL_PAD_CSI0_DAT7__EIM_DATA05 0x274 0x644 0x000 0x1 0x0
+#define MX6QDL_PAD_CSI0_DAT7__ECSPI1_SS0 0x274 0x644 0x800 0x2 0x3
+#define MX6QDL_PAD_CSI0_DAT7__KEY_ROW6 0x274 0x644 0x8f8 0x3 0x2
+#define MX6QDL_PAD_CSI0_DAT7__AUD3_RXD 0x274 0x644 0x000 0x4 0x0
+#define MX6QDL_PAD_CSI0_DAT7__GPIO5_IO25 0x274 0x644 0x000 0x5 0x0
+#define MX6QDL_PAD_CSI0_DAT7__ARM_TRACE04 0x274 0x644 0x000 0x7 0x0
+#define MX6QDL_PAD_CSI0_DAT8__IPU1_CSI0_DATA08 0x278 0x648 0x000 0x0 0x0
+#define MX6QDL_PAD_CSI0_DAT8__EIM_DATA06 0x278 0x648 0x000 0x1 0x0
+#define MX6QDL_PAD_CSI0_DAT8__ECSPI2_SCLK 0x278 0x648 0x810 0x2 0x2
+#define MX6QDL_PAD_CSI0_DAT8__KEY_COL7 0x278 0x648 0x8f0 0x3 0x2
+#define MX6QDL_PAD_CSI0_DAT8__I2C1_SDA 0x278 0x648 0x89c 0x4 0x1
+#define MX6QDL_PAD_CSI0_DAT8__GPIO5_IO26 0x278 0x648 0x000 0x5 0x0
+#define MX6QDL_PAD_CSI0_DAT8__ARM_TRACE05 0x278 0x648 0x000 0x7 0x0
+#define MX6QDL_PAD_CSI0_DAT9__IPU1_CSI0_DATA09 0x27c 0x64c 0x000 0x0 0x0
+#define MX6QDL_PAD_CSI0_DAT9__EIM_DATA07 0x27c 0x64c 0x000 0x1 0x0
+#define MX6QDL_PAD_CSI0_DAT9__ECSPI2_MOSI 0x27c 0x64c 0x818 0x2 0x2
+#define MX6QDL_PAD_CSI0_DAT9__KEY_ROW7 0x27c 0x64c 0x8fc 0x3 0x2
+#define MX6QDL_PAD_CSI0_DAT9__I2C1_SCL 0x27c 0x64c 0x898 0x4 0x1
+#define MX6QDL_PAD_CSI0_DAT9__GPIO5_IO27 0x27c 0x64c 0x000 0x5 0x0
+#define MX6QDL_PAD_CSI0_DAT9__ARM_TRACE06 0x27c 0x64c 0x000 0x7 0x0
+#define MX6QDL_PAD_CSI0_DAT10__IPU1_CSI0_DATA10 0x280 0x650 0x000 0x0 0x0
+#define MX6QDL_PAD_CSI0_DAT10__AUD3_RXC 0x280 0x650 0x000 0x1 0x0
+#define MX6QDL_PAD_CSI0_DAT10__ECSPI2_MISO 0x280 0x650 0x814 0x2 0x2
+#define MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x280 0x650 0x000 0x3 0x0
+#define MX6QDL_PAD_CSI0_DAT10__UART1_RX_DATA 0x280 0x650 0x920 0x3 0x0
+#define MX6QDL_PAD_CSI0_DAT10__GPIO5_IO28 0x280 0x650 0x000 0x5 0x0
+#define MX6QDL_PAD_CSI0_DAT10__ARM_TRACE07 0x280 0x650 0x000 0x7 0x0
+#define MX6QDL_PAD_CSI0_DAT11__IPU1_CSI0_DATA11 0x284 0x654 0x000 0x0 0x0
+#define MX6QDL_PAD_CSI0_DAT11__AUD3_RXFS 0x284 0x654 0x000 0x1 0x0
+#define MX6QDL_PAD_CSI0_DAT11__ECSPI2_SS0 0x284 0x654 0x81c 0x2 0x2
+#define MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x284 0x654 0x920 0x3 0x1
+#define MX6QDL_PAD_CSI0_DAT11__UART1_TX_DATA 0x284 0x654 0x000 0x3 0x0
+#define MX6QDL_PAD_CSI0_DAT11__GPIO5_IO29 0x284 0x654 0x000 0x5 0x0
+#define MX6QDL_PAD_CSI0_DAT11__ARM_TRACE08 0x284 0x654 0x000 0x7 0x0
+#define MX6QDL_PAD_CSI0_DAT12__IPU1_CSI0_DATA12 0x288 0x658 0x000 0x0 0x0
+#define MX6QDL_PAD_CSI0_DAT12__EIM_DATA08 0x288 0x658 0x000 0x1 0x0
+#define MX6QDL_PAD_CSI0_DAT12__UART4_TX_DATA 0x288 0x658 0x000 0x3 0x0
+#define MX6QDL_PAD_CSI0_DAT12__UART4_RX_DATA 0x288 0x658 0x938 0x3 0x2
+#define MX6QDL_PAD_CSI0_DAT12__GPIO5_IO30 0x288 0x658 0x000 0x5 0x0
+#define MX6QDL_PAD_CSI0_DAT12__ARM_TRACE09 0x288 0x658 0x000 0x7 0x0
+#define MX6QDL_PAD_CSI0_DAT13__IPU1_CSI0_DATA13 0x28c 0x65c 0x000 0x0 0x0
+#define MX6QDL_PAD_CSI0_DAT13__EIM_DATA09 0x28c 0x65c 0x000 0x1 0x0
+#define MX6QDL_PAD_CSI0_DAT13__UART4_RX_DATA 0x28c 0x65c 0x938 0x3 0x3
+#define MX6QDL_PAD_CSI0_DAT13__UART4_TX_DATA 0x28c 0x65c 0x000 0x3 0x0
+#define MX6QDL_PAD_CSI0_DAT13__GPIO5_IO31 0x28c 0x65c 0x000 0x5 0x0
+#define MX6QDL_PAD_CSI0_DAT13__ARM_TRACE10 0x28c 0x65c 0x000 0x7 0x0
+#define MX6QDL_PAD_CSI0_DAT14__IPU1_CSI0_DATA14 0x290 0x660 0x000 0x0 0x0
+#define MX6QDL_PAD_CSI0_DAT14__EIM_DATA10 0x290 0x660 0x000 0x1 0x0
+#define MX6QDL_PAD_CSI0_DAT14__UART5_TX_DATA 0x290 0x660 0x000 0x3 0x0
+#define MX6QDL_PAD_CSI0_DAT14__UART5_RX_DATA 0x290 0x660 0x940 0x3 0x2
+#define MX6QDL_PAD_CSI0_DAT14__GPIO6_IO00 0x290 0x660 0x000 0x5 0x0
+#define MX6QDL_PAD_CSI0_DAT14__ARM_TRACE11 0x290 0x660 0x000 0x7 0x0
+#define MX6QDL_PAD_CSI0_DAT15__IPU1_CSI0_DATA15 0x294 0x664 0x000 0x0 0x0
+#define MX6QDL_PAD_CSI0_DAT15__EIM_DATA11 0x294 0x664 0x000 0x1 0x0
+#define MX6QDL_PAD_CSI0_DAT15__UART5_RX_DATA 0x294 0x664 0x940 0x3 0x3
+#define MX6QDL_PAD_CSI0_DAT15__UART5_TX_DATA 0x294 0x664 0x000 0x3 0x0
+#define MX6QDL_PAD_CSI0_DAT15__GPIO6_IO01 0x294 0x664 0x000 0x5 0x0
+#define MX6QDL_PAD_CSI0_DAT15__ARM_TRACE12 0x294 0x664 0x000 0x7 0x0
+#define MX6QDL_PAD_CSI0_DAT16__IPU1_CSI0_DATA16 0x298 0x668 0x000 0x0 0x0
+#define MX6QDL_PAD_CSI0_DAT16__EIM_DATA12 0x298 0x668 0x000 0x1 0x0
+#define MX6QDL_PAD_CSI0_DAT16__UART4_RTS_B 0x298 0x668 0x934 0x3 0x0
+#define MX6QDL_PAD_CSI0_DAT16__UART4_CTS_B 0x298 0x668 0x000 0x3 0x0
+#define MX6QDL_PAD_CSI0_DAT16__GPIO6_IO02 0x298 0x668 0x000 0x5 0x0
+#define MX6QDL_PAD_CSI0_DAT16__ARM_TRACE13 0x298 0x668 0x000 0x7 0x0
+#define MX6QDL_PAD_CSI0_DAT17__IPU1_CSI0_DATA17 0x29c 0x66c 0x000 0x0 0x0
+#define MX6QDL_PAD_CSI0_DAT17__EIM_DATA13 0x29c 0x66c 0x000 0x1 0x0
+#define MX6QDL_PAD_CSI0_DAT17__UART4_CTS_B 0x29c 0x66c 0x000 0x3 0x0
+#define MX6QDL_PAD_CSI0_DAT17__UART4_RTS_B 0x29c 0x66c 0x934 0x3 0x1
+#define MX6QDL_PAD_CSI0_DAT17__GPIO6_IO03 0x29c 0x66c 0x000 0x5 0x0
+#define MX6QDL_PAD_CSI0_DAT17__ARM_TRACE14 0x29c 0x66c 0x000 0x7 0x0
+#define MX6QDL_PAD_CSI0_DAT18__IPU1_CSI0_DATA18 0x2a0 0x670 0x000 0x0 0x0
+#define MX6QDL_PAD_CSI0_DAT18__EIM_DATA14 0x2a0 0x670 0x000 0x1 0x0
+#define MX6QDL_PAD_CSI0_DAT18__UART5_RTS_B 0x2a0 0x670 0x93c 0x3 0x2
+#define MX6QDL_PAD_CSI0_DAT18__UART5_CTS_B 0x2a0 0x670 0x000 0x3 0x0
+#define MX6QDL_PAD_CSI0_DAT18__GPIO6_IO04 0x2a0 0x670 0x000 0x5 0x0
+#define MX6QDL_PAD_CSI0_DAT18__ARM_TRACE15 0x2a0 0x670 0x000 0x7 0x0
+#define MX6QDL_PAD_CSI0_DAT19__IPU1_CSI0_DATA19 0x2a4 0x674 0x000 0x0 0x0
+#define MX6QDL_PAD_CSI0_DAT19__EIM_DATA15 0x2a4 0x674 0x000 0x1 0x0
+#define MX6QDL_PAD_CSI0_DAT19__UART5_CTS_B 0x2a4 0x674 0x000 0x3 0x0
+#define MX6QDL_PAD_CSI0_DAT19__UART5_RTS_B 0x2a4 0x674 0x93c 0x3 0x3
+#define MX6QDL_PAD_CSI0_DAT19__GPIO6_IO05 0x2a4 0x674 0x000 0x5 0x0
+#define MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x2a8 0x690 0x000 0x0 0x0
+#define MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA 0x2a8 0x690 0x000 0x1 0x0
+#define MX6QDL_PAD_SD3_DAT7__UART1_RX_DATA 0x2a8 0x690 0x920 0x1 0x2
+#define MX6QDL_PAD_SD3_DAT7__GPIO6_IO17 0x2a8 0x690 0x000 0x5 0x0
+#define MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x2ac 0x694 0x000 0x0 0x0
+#define MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA 0x2ac 0x694 0x920 0x1 0x3
+#define MX6QDL_PAD_SD3_DAT6__UART1_TX_DATA 0x2ac 0x694 0x000 0x1 0x0
+#define MX6QDL_PAD_SD3_DAT6__GPIO6_IO18 0x2ac 0x694 0x000 0x5 0x0
+#define MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x2b0 0x698 0x000 0x0 0x0
+#define MX6QDL_PAD_SD3_DAT5__UART2_TX_DATA 0x2b0 0x698 0x000 0x1 0x0
+#define MX6QDL_PAD_SD3_DAT5__UART2_RX_DATA 0x2b0 0x698 0x928 0x1 0x4
+#define MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x2b0 0x698 0x000 0x5 0x0
+#define MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x2b4 0x69c 0x000 0x0 0x0
+#define MX6QDL_PAD_SD3_DAT4__UART2_RX_DATA 0x2b4 0x69c 0x928 0x1 0x5
+#define MX6QDL_PAD_SD3_DAT4__UART2_TX_DATA 0x2b4 0x69c 0x000 0x1 0x0
+#define MX6QDL_PAD_SD3_DAT4__GPIO7_IO01 0x2b4 0x69c 0x000 0x5 0x0
+#define MX6QDL_PAD_SD3_CMD__SD3_CMD 0x2b8 0x6a0 0x000 0x0 0x0
+#define MX6QDL_PAD_SD3_CMD__UART2_CTS_B 0x2b8 0x6a0 0x000 0x1 0x0
+#define MX6QDL_PAD_SD3_CMD__UART2_RTS_B 0x2b8 0x6a0 0x924 0x1 0x2
+#define MX6QDL_PAD_SD3_CMD__FLEXCAN1_TX 0x2b8 0x6a0 0x000 0x2 0x0
+#define MX6QDL_PAD_SD3_CMD__GPIO7_IO02 0x2b8 0x6a0 0x000 0x5 0x0
+#define MX6QDL_PAD_SD3_CLK__SD3_CLK 0x2bc 0x6a4 0x000 0x0 0x0
+#define MX6QDL_PAD_SD3_CLK__UART2_RTS_B 0x2bc 0x6a4 0x924 0x1 0x3
+#define MX6QDL_PAD_SD3_CLK__UART2_CTS_B 0x2bc 0x6a4 0x000 0x1 0x0
+#define MX6QDL_PAD_SD3_CLK__FLEXCAN1_RX 0x2bc 0x6a4 0x7e4 0x2 0x2
+#define MX6QDL_PAD_SD3_CLK__GPIO7_IO03 0x2bc 0x6a4 0x000 0x5 0x0
+#define MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x2c0 0x6a8 0x000 0x0 0x0
+#define MX6QDL_PAD_SD3_DAT0__UART1_CTS_B 0x2c0 0x6a8 0x000 0x1 0x0
+#define MX6QDL_PAD_SD3_DAT0__UART1_RTS_B 0x2c0 0x6a8 0x91c 0x1 0x2
+#define MX6QDL_PAD_SD3_DAT0__FLEXCAN2_TX 0x2c0 0x6a8 0x000 0x2 0x0
+#define MX6QDL_PAD_SD3_DAT0__GPIO7_IO04 0x2c0 0x6a8 0x000 0x5 0x0
+#define MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x2c4 0x6ac 0x000 0x0 0x0
+#define MX6QDL_PAD_SD3_DAT1__UART1_RTS_B 0x2c4 0x6ac 0x91c 0x1 0x3
+#define MX6QDL_PAD_SD3_DAT1__UART1_CTS_B 0x2c4 0x6ac 0x000 0x1 0x0
+#define MX6QDL_PAD_SD3_DAT1__FLEXCAN2_RX 0x2c4 0x6ac 0x7e8 0x2 0x1
+#define MX6QDL_PAD_SD3_DAT1__GPIO7_IO05 0x2c4 0x6ac 0x000 0x5 0x0
+#define MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x2c8 0x6b0 0x000 0x0 0x0
+#define MX6QDL_PAD_SD3_DAT2__GPIO7_IO06 0x2c8 0x6b0 0x000 0x5 0x0
+#define MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x2cc 0x6b4 0x000 0x0 0x0
+#define MX6QDL_PAD_SD3_DAT3__UART3_CTS_B 0x2cc 0x6b4 0x000 0x1 0x0
+#define MX6QDL_PAD_SD3_DAT3__UART3_RTS_B 0x2cc 0x6b4 0x92c 0x1 0x4
+#define MX6QDL_PAD_SD3_DAT3__GPIO7_IO07 0x2cc 0x6b4 0x000 0x5 0x0
+#define MX6QDL_PAD_SD3_RST__SD3_RESET 0x2d0 0x6b8 0x000 0x0 0x0
+#define MX6QDL_PAD_SD3_RST__UART3_RTS_B 0x2d0 0x6b8 0x92c 0x1 0x5
+#define MX6QDL_PAD_SD3_RST__UART3_CTS_B 0x2d0 0x6b8 0x000 0x1 0x0
+#define MX6QDL_PAD_SD3_RST__GPIO7_IO08 0x2d0 0x6b8 0x000 0x5 0x0
+#define MX6QDL_PAD_NANDF_CLE__NAND_CLE 0x2d4 0x6bc 0x000 0x0 0x0
+#define MX6QDL_PAD_NANDF_CLE__IPU2_SISG4 0x2d4 0x6bc 0x000 0x1 0x0
+#define MX6QDL_PAD_NANDF_CLE__GPIO6_IO07 0x2d4 0x6bc 0x000 0x5 0x0
+#define MX6QDL_PAD_NANDF_ALE__NAND_ALE 0x2d8 0x6c0 0x000 0x0 0x0
+#define MX6QDL_PAD_NANDF_ALE__SD4_RESET 0x2d8 0x6c0 0x000 0x1 0x0
+#define MX6QDL_PAD_NANDF_ALE__GPIO6_IO08 0x2d8 0x6c0 0x000 0x5 0x0
+#define MX6QDL_PAD_NANDF_WP_B__NAND_WP_B 0x2dc 0x6c4 0x000 0x0 0x0
+#define MX6QDL_PAD_NANDF_WP_B__IPU2_SISG5 0x2dc 0x6c4 0x000 0x1 0x0
+#define MX6QDL_PAD_NANDF_WP_B__GPIO6_IO09 0x2dc 0x6c4 0x000 0x5 0x0
+#define MX6QDL_PAD_NANDF_RB0__NAND_READY_B 0x2e0 0x6c8 0x000 0x0 0x0
+#define MX6QDL_PAD_NANDF_RB0__IPU2_DI0_PIN01 0x2e0 0x6c8 0x000 0x1 0x0
+#define MX6QDL_PAD_NANDF_RB0__GPIO6_IO10 0x2e0 0x6c8 0x000 0x5 0x0
+#define MX6QDL_PAD_NANDF_CS0__NAND_CE0_B 0x2e4 0x6cc 0x000 0x0 0x0
+#define MX6QDL_PAD_NANDF_CS0__GPIO6_IO11 0x2e4 0x6cc 0x000 0x5 0x0
+#define MX6QDL_PAD_NANDF_CS1__NAND_CE1_B 0x2e8 0x6d0 0x000 0x0 0x0
+#define MX6QDL_PAD_NANDF_CS1__SD4_VSELECT 0x2e8 0x6d0 0x000 0x1 0x0
+#define MX6QDL_PAD_NANDF_CS1__SD3_VSELECT 0x2e8 0x6d0 0x000 0x2 0x0
+#define MX6QDL_PAD_NANDF_CS1__GPIO6_IO14 0x2e8 0x6d0 0x000 0x5 0x0
+#define MX6QDL_PAD_NANDF_CS2__NAND_CE2_B 0x2ec 0x6d4 0x000 0x0 0x0
+#define MX6QDL_PAD_NANDF_CS2__IPU1_SISG0 0x2ec 0x6d4 0x000 0x1 0x0
+#define MX6QDL_PAD_NANDF_CS2__ESAI_TX0 0x2ec 0x6d4 0x874 0x2 0x1
+#define MX6QDL_PAD_NANDF_CS2__EIM_CRE 0x2ec 0x6d4 0x000 0x3 0x0
+#define MX6QDL_PAD_NANDF_CS2__CCM_CLKO2 0x2ec 0x6d4 0x000 0x4 0x0
+#define MX6QDL_PAD_NANDF_CS2__GPIO6_IO15 0x2ec 0x6d4 0x000 0x5 0x0
+#define MX6QDL_PAD_NANDF_CS2__IPU2_SISG0 0x2ec 0x6d4 0x000 0x6 0x0
+#define MX6QDL_PAD_NANDF_CS3__NAND_CE3_B 0x2f0 0x6d8 0x000 0x0 0x0
+#define MX6QDL_PAD_NANDF_CS3__IPU1_SISG1 0x2f0 0x6d8 0x000 0x1 0x0
+#define MX6QDL_PAD_NANDF_CS3__ESAI_TX1 0x2f0 0x6d8 0x878 0x2 0x1
+#define MX6QDL_PAD_NANDF_CS3__EIM_ADDR26 0x2f0 0x6d8 0x000 0x3 0x0
+#define MX6QDL_PAD_NANDF_CS3__GPIO6_IO16 0x2f0 0x6d8 0x000 0x5 0x0
+#define MX6QDL_PAD_NANDF_CS3__IPU2_SISG1 0x2f0 0x6d8 0x000 0x6 0x0
+#define MX6QDL_PAD_SD4_CMD__SD4_CMD 0x2f4 0x6dc 0x000 0x0 0x0
+#define MX6QDL_PAD_SD4_CMD__NAND_RE_B 0x2f4 0x6dc 0x000 0x1 0x0
+#define MX6QDL_PAD_SD4_CMD__UART3_TX_DATA 0x2f4 0x6dc 0x000 0x2 0x0
+#define MX6QDL_PAD_SD4_CMD__UART3_RX_DATA 0x2f4 0x6dc 0x930 0x2 0x2
+#define MX6QDL_PAD_SD4_CMD__GPIO7_IO09 0x2f4 0x6dc 0x000 0x5 0x0
+#define MX6QDL_PAD_SD4_CLK__SD4_CLK 0x2f8 0x6e0 0x000 0x0 0x0
+#define MX6QDL_PAD_SD4_CLK__NAND_WE_B 0x2f8 0x6e0 0x000 0x1 0x0
+#define MX6QDL_PAD_SD4_CLK__UART3_RX_DATA 0x2f8 0x6e0 0x930 0x2 0x3
+#define MX6QDL_PAD_SD4_CLK__UART3_TX_DATA 0x2f8 0x6e0 0x000 0x2 0x0
+#define MX6QDL_PAD_SD4_CLK__GPIO7_IO10 0x2f8 0x6e0 0x000 0x5 0x0
+#define MX6QDL_PAD_NANDF_D0__NAND_DATA00 0x2fc 0x6e4 0x000 0x0 0x0
+#define MX6QDL_PAD_NANDF_D0__SD1_DATA4 0x2fc 0x6e4 0x000 0x1 0x0
+#define MX6QDL_PAD_NANDF_D0__GPIO2_IO00 0x2fc 0x6e4 0x000 0x5 0x0
+#define MX6QDL_PAD_NANDF_D1__NAND_DATA01 0x300 0x6e8 0x000 0x0 0x0
+#define MX6QDL_PAD_NANDF_D1__SD1_DATA5 0x300 0x6e8 0x000 0x1 0x0
+#define MX6QDL_PAD_NANDF_D1__GPIO2_IO01 0x300 0x6e8 0x000 0x5 0x0
+#define MX6QDL_PAD_NANDF_D2__NAND_DATA02 0x304 0x6ec 0x000 0x0 0x0
+#define MX6QDL_PAD_NANDF_D2__SD1_DATA6 0x304 0x6ec 0x000 0x1 0x0
+#define MX6QDL_PAD_NANDF_D2__GPIO2_IO02 0x304 0x6ec 0x000 0x5 0x0
+#define MX6QDL_PAD_NANDF_D3__NAND_DATA03 0x308 0x6f0 0x000 0x0 0x0
+#define MX6QDL_PAD_NANDF_D3__SD1_DATA7 0x308 0x6f0 0x000 0x1 0x0
+#define MX6QDL_PAD_NANDF_D3__GPIO2_IO03 0x308 0x6f0 0x000 0x5 0x0
+#define MX6QDL_PAD_NANDF_D4__NAND_DATA04 0x30c 0x6f4 0x000 0x0 0x0
+#define MX6QDL_PAD_NANDF_D4__SD2_DATA4 0x30c 0x6f4 0x000 0x1 0x0
+#define MX6QDL_PAD_NANDF_D4__GPIO2_IO04 0x30c 0x6f4 0x000 0x5 0x0
+#define MX6QDL_PAD_NANDF_D5__NAND_DATA05 0x310 0x6f8 0x000 0x0 0x0
+#define MX6QDL_PAD_NANDF_D5__SD2_DATA5 0x310 0x6f8 0x000 0x1 0x0
+#define MX6QDL_PAD_NANDF_D5__GPIO2_IO05 0x310 0x6f8 0x000 0x5 0x0
+#define MX6QDL_PAD_NANDF_D6__NAND_DATA06 0x314 0x6fc 0x000 0x0 0x0
+#define MX6QDL_PAD_NANDF_D6__SD2_DATA6 0x314 0x6fc 0x000 0x1 0x0
+#define MX6QDL_PAD_NANDF_D6__GPIO2_IO06 0x314 0x6fc 0x000 0x5 0x0
+#define MX6QDL_PAD_NANDF_D7__NAND_DATA07 0x318 0x700 0x000 0x0 0x0
+#define MX6QDL_PAD_NANDF_D7__SD2_DATA7 0x318 0x700 0x000 0x1 0x0
+#define MX6QDL_PAD_NANDF_D7__GPIO2_IO07 0x318 0x700 0x000 0x5 0x0
+#define MX6QDL_PAD_SD4_DAT0__SD4_DATA0 0x31c 0x704 0x000 0x1 0x0
+#define MX6QDL_PAD_SD4_DAT0__NAND_DQS 0x31c 0x704 0x000 0x2 0x0
+#define MX6QDL_PAD_SD4_DAT0__GPIO2_IO08 0x31c 0x704 0x000 0x5 0x0
+#define MX6QDL_PAD_SD4_DAT1__SD4_DATA1 0x320 0x708 0x000 0x1 0x0
+#define MX6QDL_PAD_SD4_DAT1__PWM3_OUT 0x320 0x708 0x000 0x2 0x0
+#define MX6QDL_PAD_SD4_DAT1__GPIO2_IO09 0x320 0x708 0x000 0x5 0x0
+#define MX6QDL_PAD_SD4_DAT2__SD4_DATA2 0x324 0x70c 0x000 0x1 0x0
+#define MX6QDL_PAD_SD4_DAT2__PWM4_OUT 0x324 0x70c 0x000 0x2 0x0
+#define MX6QDL_PAD_SD4_DAT2__GPIO2_IO10 0x324 0x70c 0x000 0x5 0x0
+#define MX6QDL_PAD_SD4_DAT3__SD4_DATA3 0x328 0x710 0x000 0x1 0x0
+#define MX6QDL_PAD_SD4_DAT3__GPIO2_IO11 0x328 0x710 0x000 0x5 0x0
+#define MX6QDL_PAD_SD4_DAT4__SD4_DATA4 0x32c 0x714 0x000 0x1 0x0
+#define MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA 0x32c 0x714 0x928 0x2 0x6
+#define MX6QDL_PAD_SD4_DAT4__UART2_TX_DATA 0x32c 0x714 0x000 0x2 0x0
+#define MX6QDL_PAD_SD4_DAT4__GPIO2_IO12 0x32c 0x714 0x000 0x5 0x0
+#define MX6QDL_PAD_SD4_DAT5__SD4_DATA5 0x330 0x718 0x000 0x1 0x0
+#define MX6QDL_PAD_SD4_DAT5__UART2_RTS_B 0x330 0x718 0x924 0x2 0x4
+#define MX6QDL_PAD_SD4_DAT5__UART2_CTS_B 0x330 0x718 0x000 0x2 0x0
+#define MX6QDL_PAD_SD4_DAT5__GPIO2_IO13 0x330 0x718 0x000 0x5 0x0
+#define MX6QDL_PAD_SD4_DAT6__SD4_DATA6 0x334 0x71c 0x000 0x1 0x0
+#define MX6QDL_PAD_SD4_DAT6__UART2_CTS_B 0x334 0x71c 0x000 0x2 0x0
+#define MX6QDL_PAD_SD4_DAT6__UART2_RTS_B 0x334 0x71c 0x924 0x2 0x5
+#define MX6QDL_PAD_SD4_DAT6__GPIO2_IO14 0x334 0x71c 0x000 0x5 0x0
+#define MX6QDL_PAD_SD4_DAT7__SD4_DATA7 0x338 0x720 0x000 0x1 0x0
+#define MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA 0x338 0x720 0x000 0x2 0x0
+#define MX6QDL_PAD_SD4_DAT7__UART2_RX_DATA 0x338 0x720 0x928 0x2 0x7
+#define MX6QDL_PAD_SD4_DAT7__GPIO2_IO15 0x338 0x720 0x000 0x5 0x0
+#define MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x33c 0x724 0x000 0x0 0x0
+#define MX6QDL_PAD_SD1_DAT1__ECSPI5_SS0 0x33c 0x724 0x834 0x1 0x1
+#define MX6QDL_PAD_SD1_DAT1__PWM3_OUT 0x33c 0x724 0x000 0x2 0x0
+#define MX6QDL_PAD_SD1_DAT1__GPT_CAPTURE2 0x33c 0x724 0x000 0x3 0x0
+#define MX6QDL_PAD_SD1_DAT1__GPIO1_IO17 0x33c 0x724 0x000 0x5 0x0
+#define MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x340 0x728 0x000 0x0 0x0
+#define MX6QDL_PAD_SD1_DAT0__ECSPI5_MISO 0x340 0x728 0x82c 0x1 0x1
+#define MX6QDL_PAD_SD1_DAT0__GPT_CAPTURE1 0x340 0x728 0x000 0x3 0x0
+#define MX6QDL_PAD_SD1_DAT0__GPIO1_IO16 0x340 0x728 0x000 0x5 0x0
+#define MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x344 0x72c 0x000 0x0 0x0
+#define MX6QDL_PAD_SD1_DAT3__ECSPI5_SS2 0x344 0x72c 0x000 0x1 0x0
+#define MX6QDL_PAD_SD1_DAT3__GPT_COMPARE3 0x344 0x72c 0x000 0x2 0x0
+#define MX6QDL_PAD_SD1_DAT3__PWM1_OUT 0x344 0x72c 0x000 0x3 0x0
+#define MX6QDL_PAD_SD1_DAT3__WDOG2_B 0x344 0x72c 0x000 0x4 0x0
+#define MX6QDL_PAD_SD1_DAT3__GPIO1_IO21 0x344 0x72c 0x000 0x5 0x0
+#define MX6QDL_PAD_SD1_DAT3__WDOG2_RESET_B_DEB 0x344 0x72c 0x000 0x6 0x0
+#define MX6QDL_PAD_SD1_CMD__SD1_CMD 0x348 0x730 0x000 0x0 0x0
+#define MX6QDL_PAD_SD1_CMD__ECSPI5_MOSI 0x348 0x730 0x830 0x1 0x0
+#define MX6QDL_PAD_SD1_CMD__PWM4_OUT 0x348 0x730 0x000 0x2 0x0
+#define MX6QDL_PAD_SD1_CMD__GPT_COMPARE1 0x348 0x730 0x000 0x3 0x0
+#define MX6QDL_PAD_SD1_CMD__GPIO1_IO18 0x348 0x730 0x000 0x5 0x0
+#define MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x34c 0x734 0x000 0x0 0x0
+#define MX6QDL_PAD_SD1_DAT2__ECSPI5_SS1 0x34c 0x734 0x838 0x1 0x1
+#define MX6QDL_PAD_SD1_DAT2__GPT_COMPARE2 0x34c 0x734 0x000 0x2 0x0
+#define MX6QDL_PAD_SD1_DAT2__PWM2_OUT 0x34c 0x734 0x000 0x3 0x0
+#define MX6QDL_PAD_SD1_DAT2__WDOG1_B 0x34c 0x734 0x000 0x4 0x0
+#define MX6QDL_PAD_SD1_DAT2__GPIO1_IO19 0x34c 0x734 0x000 0x5 0x0
+#define MX6QDL_PAD_SD1_DAT2__WDOG1_RESET_B_DEB 0x34c 0x734 0x000 0x6 0x0
+#define MX6QDL_PAD_SD1_CLK__SD1_CLK 0x350 0x738 0x000 0x0 0x0
+#define MX6QDL_PAD_SD1_CLK__ECSPI5_SCLK 0x350 0x738 0x828 0x1 0x0
+#define MX6QDL_PAD_SD1_CLK__GPT_CLKIN 0x350 0x738 0x000 0x3 0x0
+#define MX6QDL_PAD_SD1_CLK__GPIO1_IO20 0x350 0x738 0x000 0x5 0x0
+#define MX6QDL_PAD_SD2_CLK__SD2_CLK 0x354 0x73c 0x000 0x0 0x0
+#define MX6QDL_PAD_SD2_CLK__ECSPI5_SCLK 0x354 0x73c 0x828 0x1 0x1
+#define MX6QDL_PAD_SD2_CLK__KEY_COL5 0x354 0x73c 0x8e8 0x2 0x3
+#define MX6QDL_PAD_SD2_CLK__AUD4_RXFS 0x354 0x73c 0x7c0 0x3 0x1
+#define MX6QDL_PAD_SD2_CLK__GPIO1_IO10 0x354 0x73c 0x000 0x5 0x0
+#define MX6QDL_PAD_SD2_CMD__SD2_CMD 0x358 0x740 0x000 0x0 0x0
+#define MX6QDL_PAD_SD2_CMD__ECSPI5_MOSI 0x358 0x740 0x830 0x1 0x1
+#define MX6QDL_PAD_SD2_CMD__KEY_ROW5 0x358 0x740 0x8f4 0x2 0x2
+#define MX6QDL_PAD_SD2_CMD__AUD4_RXC 0x358 0x740 0x7bc 0x3 0x1
+#define MX6QDL_PAD_SD2_CMD__GPIO1_IO11 0x358 0x740 0x000 0x5 0x0
+#define MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x35c 0x744 0x000 0x0 0x0
+#define MX6QDL_PAD_SD2_DAT3__ECSPI5_SS3 0x35c 0x744 0x000 0x1 0x0
+#define MX6QDL_PAD_SD2_DAT3__KEY_COL6 0x35c 0x744 0x8ec 0x2 0x2
+#define MX6QDL_PAD_SD2_DAT3__AUD4_TXC 0x35c 0x744 0x7c4 0x3 0x1
+#define MX6QDL_PAD_SD2_DAT3__GPIO1_IO12 0x35c 0x744 0x000 0x5 0x0
#endif /* __DTS_IMX6Q_PINFUNC_H */
diff --git a/arch/arm/boot/dts/imx6q-sabreauto.dts b/arch/arm/boot/dts/imx6q-sabreauto.dts
index 09a7580..334b924 100644
--- a/arch/arm/boot/dts/imx6q-sabreauto.dts
+++ b/arch/arm/boot/dts/imx6q-sabreauto.dts
@@ -20,24 +20,6 @@
compatible = "fsl,imx6q-sabreauto", "fsl,imx6q";
};
-&iomuxc {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_hog>;
-
- hog {
- pinctrl_hog: hoggrp {
- fsl,pins = <
- MX6Q_PAD_NANDF_CS2__GPIO6_IO15 0x80000000
- MX6Q_PAD_SD2_DAT2__GPIO1_IO13 0x80000000
- >;
- };
- };
-
- ecspi1 {
- pinctrl_ecspi1_sabreauto: ecspi1-sabreauto {
- fsl,pins = <
- MX6Q_PAD_EIM_D19__GPIO3_IO19 0x80000000
- >;
- };
- };
+&sata {
+ status = "okay";
};
diff --git a/arch/arm/boot/dts/imx6q-sabrelite.dts b/arch/arm/boot/dts/imx6q-sabrelite.dts
index 6a00066..3530280 100644
--- a/arch/arm/boot/dts/imx6q-sabrelite.dts
+++ b/arch/arm/boot/dts/imx6q-sabrelite.dts
@@ -65,6 +65,10 @@
};
};
+&sata {
+ status = "okay";
+};
+
&ecspi1 {
fsl,spi-num-chipselects = <1>;
cs-gpios = <&gpio3 19 0>;
@@ -91,14 +95,14 @@
hog {
pinctrl_hog: hoggrp {
fsl,pins = <
- MX6Q_PAD_NANDF_D6__GPIO2_IO06 0x80000000
- MX6Q_PAD_NANDF_D7__GPIO2_IO07 0x80000000
- MX6Q_PAD_EIM_D19__GPIO3_IO19 0x80000000
- MX6Q_PAD_EIM_D22__GPIO3_IO22 0x80000000
- MX6Q_PAD_EIM_D23__GPIO3_IO23 0x80000000
- MX6Q_PAD_SD3_DAT5__GPIO7_IO00 0x80000000
- MX6Q_PAD_SD3_DAT4__GPIO7_IO01 0x1f0b0
- MX6Q_PAD_GPIO_0__CCM_CLKO1 0x80000000
+ MX6QDL_PAD_NANDF_D6__GPIO2_IO06 0x80000000
+ MX6QDL_PAD_NANDF_D7__GPIO2_IO07 0x80000000
+ MX6QDL_PAD_EIM_D19__GPIO3_IO19 0x80000000
+ MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x80000000
+ MX6QDL_PAD_EIM_D23__GPIO3_IO23 0x80000000
+ MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x80000000
+ MX6QDL_PAD_SD3_DAT4__GPIO7_IO01 0x1f0b0
+ MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x80000000
>;
};
};
@@ -163,7 +167,7 @@
codec: sgtl5000@0a {
compatible = "fsl,sgtl5000";
reg = <0x0a>;
- clocks = <&clks 169>;
+ clocks = <&clks 201>;
VDDA-supply = <®_2p5v>;
VDDIO-supply = <®_3p3v>;
};
diff --git a/arch/arm/boot/dts/imx6q-sabresd.dts b/arch/arm/boot/dts/imx6q-sabresd.dts
index 0038228..9cbdfe7 100644
--- a/arch/arm/boot/dts/imx6q-sabresd.dts
+++ b/arch/arm/boot/dts/imx6q-sabresd.dts
@@ -20,21 +20,6 @@
compatible = "fsl,imx6q-sabresd", "fsl,imx6q";
};
-&iomuxc {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_hog>;
-
- hog {
- pinctrl_hog: hoggrp {
- fsl,pins = <
- MX6Q_PAD_GPIO_4__GPIO1_IO04 0x80000000
- MX6Q_PAD_GPIO_5__GPIO1_IO05 0x80000000
- MX6Q_PAD_NANDF_D0__GPIO2_IO00 0x80000000
- MX6Q_PAD_NANDF_D1__GPIO2_IO01 0x80000000
- MX6Q_PAD_NANDF_D2__GPIO2_IO02 0x80000000
- MX6Q_PAD_NANDF_D3__GPIO2_IO03 0x80000000
- MX6Q_PAD_GPIO_0__CCM_CLKO1 0x130b0
- >;
- };
- };
+&sata {
+ status = "okay";
};
diff --git a/arch/arm/boot/dts/imx6q-wandboard.dts b/arch/arm/boot/dts/imx6q-wandboard.dts
new file mode 100644
index 0000000..36be17f
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-wandboard.dts
@@ -0,0 +1,26 @@
+/*
+ * Copyright 2013 Freescale Semiconductor, Inc.
+ *
+ * Author: Fabio Estevam <fabio.estevam@freescale.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+/dts-v1/;
+#include "imx6q.dtsi"
+#include "imx6qdl-wandboard.dtsi"
+
+/ {
+ model = "Wandboard i.MX6 Quad Board";
+ compatible = "wand,imx6q-wandboard", "fsl,imx6q";
+
+ memory {
+ reg = <0x10000000 0x80000000>;
+ };
+};
+
+&sata {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6q.dtsi b/arch/arm/boot/dts/imx6q.dtsi
index ba09dc3..f024ef2 100644
--- a/arch/arm/boot/dts/imx6q.dtsi
+++ b/arch/arm/boot/dts/imx6q.dtsi
@@ -8,8 +8,8 @@
*
*/
-#include "imx6qdl.dtsi"
#include "imx6q-pinfunc.h"
+#include "imx6qdl.dtsi"
/ {
cpus {
@@ -61,6 +61,12 @@
};
soc {
+ ocram: sram@00900000 {
+ compatible = "mmio-sram";
+ reg = <0x00900000 0x40000>;
+ clocks = <&clks 142>;
+ };
+
aips-bus@02000000 { /* AIPS1 */
spba-bus@02000000 {
ecspi5: ecspi@02018000 {
@@ -77,357 +83,54 @@
iomuxc: iomuxc@020e0000 {
compatible = "fsl,imx6q-iomuxc";
- reg = <0x020e0000 0x4000>;
- /* shared pinctrl settings */
- audmux {
- pinctrl_audmux_1: audmux-1 {
+ ipu2 {
+ pinctrl_ipu2_1: ipu2grp-1 {
fsl,pins = <
- MX6Q_PAD_SD2_DAT0__AUD4_RXD 0x80000000
- MX6Q_PAD_SD2_DAT3__AUD4_TXC 0x80000000
- MX6Q_PAD_SD2_DAT2__AUD4_TXD 0x80000000
- MX6Q_PAD_SD2_DAT1__AUD4_TXFS 0x80000000
+ MX6QDL_PAD_DI0_DISP_CLK__IPU2_DI0_DISP_CLK 0x10
+ MX6QDL_PAD_DI0_PIN15__IPU2_DI0_PIN15 0x10
+ MX6QDL_PAD_DI0_PIN2__IPU2_DI0_PIN02 0x10
+ MX6QDL_PAD_DI0_PIN3__IPU2_DI0_PIN03 0x10
+ MX6QDL_PAD_DI0_PIN4__IPU2_DI0_PIN04 0x80000000
+ MX6QDL_PAD_DISP0_DAT0__IPU2_DISP0_DATA00 0x10
+ MX6QDL_PAD_DISP0_DAT1__IPU2_DISP0_DATA01 0x10
+ MX6QDL_PAD_DISP0_DAT2__IPU2_DISP0_DATA02 0x10
+ MX6QDL_PAD_DISP0_DAT3__IPU2_DISP0_DATA03 0x10
+ MX6QDL_PAD_DISP0_DAT4__IPU2_DISP0_DATA04 0x10
+ MX6QDL_PAD_DISP0_DAT5__IPU2_DISP0_DATA05 0x10
+ MX6QDL_PAD_DISP0_DAT6__IPU2_DISP0_DATA06 0x10
+ MX6QDL_PAD_DISP0_DAT7__IPU2_DISP0_DATA07 0x10
+ MX6QDL_PAD_DISP0_DAT8__IPU2_DISP0_DATA08 0x10
+ MX6QDL_PAD_DISP0_DAT9__IPU2_DISP0_DATA09 0x10
+ MX6QDL_PAD_DISP0_DAT10__IPU2_DISP0_DATA10 0x10
+ MX6QDL_PAD_DISP0_DAT11__IPU2_DISP0_DATA11 0x10
+ MX6QDL_PAD_DISP0_DAT12__IPU2_DISP0_DATA12 0x10
+ MX6QDL_PAD_DISP0_DAT13__IPU2_DISP0_DATA13 0x10
+ MX6QDL_PAD_DISP0_DAT14__IPU2_DISP0_DATA14 0x10
+ MX6QDL_PAD_DISP0_DAT15__IPU2_DISP0_DATA15 0x10
+ MX6QDL_PAD_DISP0_DAT16__IPU2_DISP0_DATA16 0x10
+ MX6QDL_PAD_DISP0_DAT17__IPU2_DISP0_DATA17 0x10
+ MX6QDL_PAD_DISP0_DAT18__IPU2_DISP0_DATA18 0x10
+ MX6QDL_PAD_DISP0_DAT19__IPU2_DISP0_DATA19 0x10
+ MX6QDL_PAD_DISP0_DAT20__IPU2_DISP0_DATA20 0x10
+ MX6QDL_PAD_DISP0_DAT21__IPU2_DISP0_DATA21 0x10
+ MX6QDL_PAD_DISP0_DAT22__IPU2_DISP0_DATA22 0x10
+ MX6QDL_PAD_DISP0_DAT23__IPU2_DISP0_DATA23 0x10
>;
};
-
- pinctrl_audmux_2: audmux-2 {
- fsl,pins = <
- MX6Q_PAD_CSI0_DAT7__AUD3_RXD 0x80000000
- MX6Q_PAD_CSI0_DAT4__AUD3_TXC 0x80000000
- MX6Q_PAD_CSI0_DAT5__AUD3_TXD 0x80000000
- MX6Q_PAD_CSI0_DAT6__AUD3_TXFS 0x80000000
- >;
- };
- };
-
- ecspi1 {
- pinctrl_ecspi1_1: ecspi1grp-1 {
- fsl,pins = <
- MX6Q_PAD_EIM_D17__ECSPI1_MISO 0x100b1
- MX6Q_PAD_EIM_D18__ECSPI1_MOSI 0x100b1
- MX6Q_PAD_EIM_D16__ECSPI1_SCLK 0x100b1
- >;
- };
- };
-
- ecspi3 {
- pinctrl_ecspi3_1: ecspi3grp-1 {
- fsl,pins = <
- MX6Q_PAD_DISP0_DAT2__ECSPI3_MISO 0x100b1
- MX6Q_PAD_DISP0_DAT1__ECSPI3_MOSI 0x100b1
- MX6Q_PAD_DISP0_DAT0__ECSPI3_SCLK 0x100b1
- >;
- };
- };
-
- enet {
- pinctrl_enet_1: enetgrp-1 {
- fsl,pins = <
- MX6Q_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0
- MX6Q_PAD_ENET_MDC__ENET_MDC 0x1b0b0
- MX6Q_PAD_RGMII_TXC__RGMII_TXC 0x1b0b0
- MX6Q_PAD_RGMII_TD0__RGMII_TD0 0x1b0b0
- MX6Q_PAD_RGMII_TD1__RGMII_TD1 0x1b0b0
- MX6Q_PAD_RGMII_TD2__RGMII_TD2 0x1b0b0
- MX6Q_PAD_RGMII_TD3__RGMII_TD3 0x1b0b0
- MX6Q_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b0b0
- MX6Q_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0
- MX6Q_PAD_RGMII_RXC__RGMII_RXC 0x1b0b0
- MX6Q_PAD_RGMII_RD0__RGMII_RD0 0x1b0b0
- MX6Q_PAD_RGMII_RD1__RGMII_RD1 0x1b0b0
- MX6Q_PAD_RGMII_RD2__RGMII_RD2 0x1b0b0
- MX6Q_PAD_RGMII_RD3__RGMII_RD3 0x1b0b0
- MX6Q_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0
- MX6Q_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8
- >;
- };
-
- pinctrl_enet_2: enetgrp-2 {
- fsl,pins = <
- MX6Q_PAD_KEY_COL1__ENET_MDIO 0x1b0b0
- MX6Q_PAD_KEY_COL2__ENET_MDC 0x1b0b0
- MX6Q_PAD_RGMII_TXC__RGMII_TXC 0x1b0b0
- MX6Q_PAD_RGMII_TD0__RGMII_TD0 0x1b0b0
- MX6Q_PAD_RGMII_TD1__RGMII_TD1 0x1b0b0
- MX6Q_PAD_RGMII_TD2__RGMII_TD2 0x1b0b0
- MX6Q_PAD_RGMII_TD3__RGMII_TD3 0x1b0b0
- MX6Q_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b0b0
- MX6Q_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0
- MX6Q_PAD_RGMII_RXC__RGMII_RXC 0x1b0b0
- MX6Q_PAD_RGMII_RD0__RGMII_RD0 0x1b0b0
- MX6Q_PAD_RGMII_RD1__RGMII_RD1 0x1b0b0
- MX6Q_PAD_RGMII_RD2__RGMII_RD2 0x1b0b0
- MX6Q_PAD_RGMII_RD3__RGMII_RD3 0x1b0b0
- MX6Q_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0
- >;
- };
-
- pinctrl_enet_3: enetgrp-3 {
- fsl,pins = <
- MX6Q_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0
- MX6Q_PAD_ENET_MDC__ENET_MDC 0x1b0b0
- MX6Q_PAD_RGMII_TXC__RGMII_TXC 0x1b0b0
- MX6Q_PAD_RGMII_TD0__RGMII_TD0 0x1b0b0
- MX6Q_PAD_RGMII_TD1__RGMII_TD1 0x1b0b0
- MX6Q_PAD_RGMII_TD2__RGMII_TD2 0x1b0b0
- MX6Q_PAD_RGMII_TD3__RGMII_TD3 0x1b0b0
- MX6Q_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b0b0
- MX6Q_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0
- MX6Q_PAD_RGMII_RXC__RGMII_RXC 0x1b0b0
- MX6Q_PAD_RGMII_RD0__RGMII_RD0 0x1b0b0
- MX6Q_PAD_RGMII_RD1__RGMII_RD1 0x1b0b0
- MX6Q_PAD_RGMII_RD2__RGMII_RD2 0x1b0b0
- MX6Q_PAD_RGMII_RD3__RGMII_RD3 0x1b0b0
- MX6Q_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0
- MX6Q_PAD_ENET_TX_EN__ENET_TX_EN 0x1b0b0
- >;
- };
- };
-
- gpmi-nand {
- pinctrl_gpmi_nand_1: gpmi-nand-1 {
- fsl,pins = <
- MX6Q_PAD_NANDF_CLE__NAND_CLE 0xb0b1
- MX6Q_PAD_NANDF_ALE__NAND_ALE 0xb0b1
- MX6Q_PAD_NANDF_WP_B__NAND_WP_B 0xb0b1
- MX6Q_PAD_NANDF_RB0__NAND_READY_B 0xb000
- MX6Q_PAD_NANDF_CS0__NAND_CE0_B 0xb0b1
- MX6Q_PAD_NANDF_CS1__NAND_CE1_B 0xb0b1
- MX6Q_PAD_SD4_CMD__NAND_RE_B 0xb0b1
- MX6Q_PAD_SD4_CLK__NAND_WE_B 0xb0b1
- MX6Q_PAD_NANDF_D0__NAND_DATA00 0xb0b1
- MX6Q_PAD_NANDF_D1__NAND_DATA01 0xb0b1
- MX6Q_PAD_NANDF_D2__NAND_DATA02 0xb0b1
- MX6Q_PAD_NANDF_D3__NAND_DATA03 0xb0b1
- MX6Q_PAD_NANDF_D4__NAND_DATA04 0xb0b1
- MX6Q_PAD_NANDF_D5__NAND_DATA05 0xb0b1
- MX6Q_PAD_NANDF_D6__NAND_DATA06 0xb0b1
- MX6Q_PAD_NANDF_D7__NAND_DATA07 0xb0b1
- MX6Q_PAD_SD4_DAT0__NAND_DQS 0x00b1
- >;
- };
- };
-
- i2c1 {
- pinctrl_i2c1_1: i2c1grp-1 {
- fsl,pins = <
- MX6Q_PAD_EIM_D21__I2C1_SCL 0x4001b8b1
- MX6Q_PAD_EIM_D28__I2C1_SDA 0x4001b8b1
- >;
- };
-
- pinctrl_i2c1_2: i2c1grp-2 {
- fsl,pins = <
- MX6Q_PAD_CSI0_DAT8__I2C1_SDA 0x4001b8b1
- MX6Q_PAD_CSI0_DAT9__I2C1_SCL 0x4001b8b1
- >;
- };
- };
-
- i2c2 {
- pinctrl_i2c2_1: i2c2grp-1 {
- fsl,pins = <
- MX6Q_PAD_EIM_EB2__I2C2_SCL 0x4001b8b1
- MX6Q_PAD_EIM_D16__I2C2_SDA 0x4001b8b1
- >;
- };
- };
-
- i2c3 {
- pinctrl_i2c3_1: i2c3grp-1 {
- fsl,pins = <
- MX6Q_PAD_EIM_D17__I2C3_SCL 0x4001b8b1
- MX6Q_PAD_EIM_D18__I2C3_SDA 0x4001b8b1
- >;
- };
- };
-
- uart1 {
- pinctrl_uart1_1: uart1grp-1 {
- fsl,pins = <
- MX6Q_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0b1
- MX6Q_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1
- >;
- };
- };
-
- uart2 {
- pinctrl_uart2_1: uart2grp-1 {
- fsl,pins = <
- MX6Q_PAD_EIM_D26__UART2_TX_DATA 0x1b0b1
- MX6Q_PAD_EIM_D27__UART2_RX_DATA 0x1b0b1
- >;
- };
- };
-
- uart4 {
- pinctrl_uart4_1: uart4grp-1 {
- fsl,pins = <
- MX6Q_PAD_KEY_COL0__UART4_TX_DATA 0x1b0b1
- MX6Q_PAD_KEY_ROW0__UART4_RX_DATA 0x1b0b1
- >;
- };
- };
-
- usbotg {
- pinctrl_usbotg_1: usbotggrp-1 {
- fsl,pins = <
- MX6Q_PAD_GPIO_1__USB_OTG_ID 0x17059
- >;
- };
-
- pinctrl_usbotg_2: usbotggrp-2 {
- fsl,pins = <
- MX6Q_PAD_ENET_RX_ER__USB_OTG_ID 0x17059
- >;
- };
- };
-
- usdhc2 {
- pinctrl_usdhc2_1: usdhc2grp-1 {
- fsl,pins = <
- MX6Q_PAD_SD2_CMD__SD2_CMD 0x17059
- MX6Q_PAD_SD2_CLK__SD2_CLK 0x10059
- MX6Q_PAD_SD2_DAT0__SD2_DATA0 0x17059
- MX6Q_PAD_SD2_DAT1__SD2_DATA1 0x17059
- MX6Q_PAD_SD2_DAT2__SD2_DATA2 0x17059
- MX6Q_PAD_SD2_DAT3__SD2_DATA3 0x17059
- MX6Q_PAD_NANDF_D4__SD2_DATA4 0x17059
- MX6Q_PAD_NANDF_D5__SD2_DATA5 0x17059
- MX6Q_PAD_NANDF_D6__SD2_DATA6 0x17059
- MX6Q_PAD_NANDF_D7__SD2_DATA7 0x17059
- >;
- };
-
- pinctrl_usdhc2_2: usdhc2grp-2 {
- fsl,pins = <
- MX6Q_PAD_SD2_CMD__SD2_CMD 0x17059
- MX6Q_PAD_SD2_CLK__SD2_CLK 0x10059
- MX6Q_PAD_SD2_DAT0__SD2_DATA0 0x17059
- MX6Q_PAD_SD2_DAT1__SD2_DATA1 0x17059
- MX6Q_PAD_SD2_DAT2__SD2_DATA2 0x17059
- MX6Q_PAD_SD2_DAT3__SD2_DATA3 0x17059
- >;
- };
- };
-
- usdhc3 {
- pinctrl_usdhc3_1: usdhc3grp-1 {
- fsl,pins = <
- MX6Q_PAD_SD3_CMD__SD3_CMD 0x17059
- MX6Q_PAD_SD3_CLK__SD3_CLK 0x10059
- MX6Q_PAD_SD3_DAT0__SD3_DATA0 0x17059
- MX6Q_PAD_SD3_DAT1__SD3_DATA1 0x17059
- MX6Q_PAD_SD3_DAT2__SD3_DATA2 0x17059
- MX6Q_PAD_SD3_DAT3__SD3_DATA3 0x17059
- MX6Q_PAD_SD3_DAT4__SD3_DATA4 0x17059
- MX6Q_PAD_SD3_DAT5__SD3_DATA5 0x17059
- MX6Q_PAD_SD3_DAT6__SD3_DATA6 0x17059
- MX6Q_PAD_SD3_DAT7__SD3_DATA7 0x17059
- >;
- };
-
- pinctrl_usdhc3_2: usdhc3grp-2 {
- fsl,pins = <
- MX6Q_PAD_SD3_CMD__SD3_CMD 0x17059
- MX6Q_PAD_SD3_CLK__SD3_CLK 0x10059
- MX6Q_PAD_SD3_DAT0__SD3_DATA0 0x17059
- MX6Q_PAD_SD3_DAT1__SD3_DATA1 0x17059
- MX6Q_PAD_SD3_DAT2__SD3_DATA2 0x17059
- MX6Q_PAD_SD3_DAT3__SD3_DATA3 0x17059
- >;
- };
- };
-
- usdhc4 {
- pinctrl_usdhc4_1: usdhc4grp-1 {
- fsl,pins = <
- MX6Q_PAD_SD4_CMD__SD4_CMD 0x17059
- MX6Q_PAD_SD4_CLK__SD4_CLK 0x10059
- MX6Q_PAD_SD4_DAT0__SD4_DATA0 0x17059
- MX6Q_PAD_SD4_DAT1__SD4_DATA1 0x17059
- MX6Q_PAD_SD4_DAT2__SD4_DATA2 0x17059
- MX6Q_PAD_SD4_DAT3__SD4_DATA3 0x17059
- MX6Q_PAD_SD4_DAT4__SD4_DATA4 0x17059
- MX6Q_PAD_SD4_DAT5__SD4_DATA5 0x17059
- MX6Q_PAD_SD4_DAT6__SD4_DATA6 0x17059
- MX6Q_PAD_SD4_DAT7__SD4_DATA7 0x17059
- >;
- };
-
- pinctrl_usdhc4_2: usdhc4grp-2 {
- fsl,pins = <
- MX6Q_PAD_SD4_CMD__SD4_CMD 0x17059
- MX6Q_PAD_SD4_CLK__SD4_CLK 0x10059
- MX6Q_PAD_SD4_DAT0__SD4_DATA0 0x17059
- MX6Q_PAD_SD4_DAT1__SD4_DATA1 0x17059
- MX6Q_PAD_SD4_DAT2__SD4_DATA2 0x17059
- MX6Q_PAD_SD4_DAT3__SD4_DATA3 0x17059
- >;
- };
- };
-
- weim {
- pinctrl_weim_cs0_1: weim_cs0grp-1 {
- fsl,pins = <
- MX6Q_PAD_EIM_CS0__EIM_CS0_B 0xb0b1
- >;
- };
-
- pinctrl_weim_nor_1: weimnorgrp-1 {
- fsl,pins = <
- MX6Q_PAD_EIM_OE__EIM_OE_B 0xb0b1
- MX6Q_PAD_EIM_RW__EIM_RW 0xb0b1
- MX6Q_PAD_EIM_WAIT__EIM_WAIT_B 0xb060
- /* data */
- MX6Q_PAD_EIM_D16__EIM_DATA16 0x1b0b0
- MX6Q_PAD_EIM_D17__EIM_DATA17 0x1b0b0
- MX6Q_PAD_EIM_D18__EIM_DATA18 0x1b0b0
- MX6Q_PAD_EIM_D19__EIM_DATA19 0x1b0b0
- MX6Q_PAD_EIM_D20__EIM_DATA20 0x1b0b0
- MX6Q_PAD_EIM_D21__EIM_DATA21 0x1b0b0
- MX6Q_PAD_EIM_D22__EIM_DATA22 0x1b0b0
- MX6Q_PAD_EIM_D23__EIM_DATA23 0x1b0b0
- MX6Q_PAD_EIM_D24__EIM_DATA24 0x1b0b0
- MX6Q_PAD_EIM_D25__EIM_DATA25 0x1b0b0
- MX6Q_PAD_EIM_D26__EIM_DATA26 0x1b0b0
- MX6Q_PAD_EIM_D27__EIM_DATA27 0x1b0b0
- MX6Q_PAD_EIM_D28__EIM_DATA28 0x1b0b0
- MX6Q_PAD_EIM_D29__EIM_DATA29 0x1b0b0
- MX6Q_PAD_EIM_D30__EIM_DATA30 0x1b0b0
- MX6Q_PAD_EIM_D31__EIM_DATA31 0x1b0b0
- /* address */
- MX6Q_PAD_EIM_A23__EIM_ADDR23 0xb0b1
- MX6Q_PAD_EIM_A22__EIM_ADDR22 0xb0b1
- MX6Q_PAD_EIM_A21__EIM_ADDR21 0xb0b1
- MX6Q_PAD_EIM_A20__EIM_ADDR20 0xb0b1
- MX6Q_PAD_EIM_A19__EIM_ADDR19 0xb0b1
- MX6Q_PAD_EIM_A18__EIM_ADDR18 0xb0b1
- MX6Q_PAD_EIM_A17__EIM_ADDR17 0xb0b1
- MX6Q_PAD_EIM_A16__EIM_ADDR16 0xb0b1
- MX6Q_PAD_EIM_DA15__EIM_AD15 0xb0b1
- MX6Q_PAD_EIM_DA14__EIM_AD14 0xb0b1
- MX6Q_PAD_EIM_DA13__EIM_AD13 0xb0b1
- MX6Q_PAD_EIM_DA12__EIM_AD12 0xb0b1
- MX6Q_PAD_EIM_DA11__EIM_AD11 0xb0b1
- MX6Q_PAD_EIM_DA10__EIM_AD10 0xb0b1
- MX6Q_PAD_EIM_DA9__EIM_AD09 0xb0b1
- MX6Q_PAD_EIM_DA8__EIM_AD08 0xb0b1
- MX6Q_PAD_EIM_DA7__EIM_AD07 0xb0b1
- MX6Q_PAD_EIM_DA6__EIM_AD06 0xb0b1
- MX6Q_PAD_EIM_DA5__EIM_AD05 0xb0b1
- MX6Q_PAD_EIM_DA4__EIM_AD04 0xb0b1
- MX6Q_PAD_EIM_DA3__EIM_AD03 0xb0b1
- MX6Q_PAD_EIM_DA2__EIM_AD02 0xb0b1
- MX6Q_PAD_EIM_DA1__EIM_AD01 0xb0b1
- MX6Q_PAD_EIM_DA0__EIM_AD00 0xb0b1
- >;
- };
-
};
};
};
+ sata: sata@02200000 {
+ compatible = "fsl,imx6q-ahci";
+ reg = <0x02200000 0x4000>;
+ interrupts = <0 39 0x04>;
+ clocks = <&clks 154>, <&clks 187>, <&clks 105>;
+ clock-names = "sata", "sata_ref", "ahb";
+ status = "disabled";
+ };
+
ipu2: ipu@02800000 {
#crtc-cells = <1>;
compatible = "fsl,imx6q-ipu";
diff --git a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi
index e994011..1cbbc51 100644
--- a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi
@@ -45,6 +45,28 @@
status = "okay";
};
+&iomuxc {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_hog>;
+
+ hog {
+ pinctrl_hog: hoggrp {
+ fsl,pins = <
+ MX6QDL_PAD_NANDF_CS2__GPIO6_IO15 0x80000000
+ MX6QDL_PAD_SD2_DAT2__GPIO1_IO13 0x80000000
+ >;
+ };
+ };
+
+ ecspi1 {
+ pinctrl_ecspi1_sabreauto: ecspi1-sabreauto {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_D19__GPIO3_IO19 0x80000000
+ >;
+ };
+ };
+};
+
&uart4 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart4_1>;
diff --git a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
index 6e5dfdb..39eafc2 100644
--- a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
@@ -27,6 +27,15 @@
enable-active-high;
};
+ reg_usb_h1_vbus: usb_h1_vbus {
+ compatible = "regulator-fixed";
+ regulator-name = "usb_h1_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio1 29 0>;
+ enable-active-high;
+ };
+
reg_audio: wm8962_supply {
compatible = "regulator-fixed";
regulator-name = "wm8962-supply";
@@ -41,12 +50,14 @@
volume-up {
label = "Volume Up";
gpios = <&gpio1 4 0>;
+ gpio-key,wakeup;
linux,code = <115>; /* KEY_VOLUMEUP */
};
volume-down {
label = "Volume Down";
gpios = <&gpio1 5 0>;
+ gpio-key,wakeup;
linux,code = <114>; /* KEY_VOLUMEDOWN */
};
};
@@ -77,6 +88,22 @@
status = "okay";
};
+&ecspi1 {
+ fsl,spi-num-chipselects = <1>;
+ cs-gpios = <&gpio4 9 0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ecspi1_2>;
+ status = "okay";
+
+ flash: m25p80@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "st,m25p32";
+ spi-max-frequency = <20000000>;
+ reg = <0>;
+ };
+};
+
&fec {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_enet_1>;
@@ -93,7 +120,7 @@
codec: wm8962@1a {
compatible = "wlf,wm8962";
reg = <0x1a>;
- clocks = <&clks 169>;
+ clocks = <&clks 201>;
DCVDD-supply = <®_audio>;
DBVDD-supply = <®_audio>;
AVDD-supply = <®_audio>;
@@ -113,6 +140,68 @@
};
};
+&i2c3 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c3_2>;
+ status = "okay";
+
+ egalax_ts@04 {
+ compatible = "eeti,egalax_ts";
+ reg = <0x04>;
+ interrupt-parent = <&gpio6>;
+ interrupts = <7 2>;
+ wakeup-gpios = <&gpio6 7 0>;
+ };
+};
+
+&iomuxc {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_hog>;
+
+ hog {
+ pinctrl_hog: hoggrp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x80000000
+ MX6QDL_PAD_GPIO_5__GPIO1_IO05 0x80000000
+ MX6QDL_PAD_NANDF_D0__GPIO2_IO00 0x80000000
+ MX6QDL_PAD_NANDF_D1__GPIO2_IO01 0x80000000
+ MX6QDL_PAD_NANDF_D2__GPIO2_IO02 0x80000000
+ MX6QDL_PAD_NANDF_D3__GPIO2_IO03 0x80000000
+ MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x130b0
+ MX6QDL_PAD_NANDF_CLE__GPIO6_IO07 0x80000000
+ MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x80000000
+ MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x80000000
+ >;
+ };
+ };
+};
+
+&ldb {
+ status = "okay";
+
+ lvds-channel@1 {
+ fsl,data-mapping = "spwg";
+ fsl,data-width = <18>;
+ status = "okay";
+
+ display-timings {
+ native-mode = <&timing0>;
+ timing0: hsd100pxn1 {
+ clock-frequency = <65000000>;
+ hactive = <1024>;
+ vactive = <768>;
+ hback-porch = <220>;
+ hfront-porch = <40>;
+ vback-porch = <21>;
+ vfront-porch = <7>;
+ hsync-len = <60>;
+ vsync-len = <10>;
+ };
+ };
+ };
+};
+
&ssi2 {
fsl,mode = "i2s-slave";
status = "okay";
@@ -125,6 +214,7 @@
};
&usbh1 {
+ vbus-supply = <®_usb_h1_vbus>;
status = "okay";
};
diff --git a/arch/arm/boot/dts/imx6qdl-wandboard.dtsi b/arch/arm/boot/dts/imx6qdl-wandboard.dtsi
new file mode 100644
index 0000000..a55113e
--- /dev/null
+++ b/arch/arm/boot/dts/imx6qdl-wandboard.dtsi
@@ -0,0 +1,137 @@
+/*
+ * Copyright 2013 Freescale Semiconductor, Inc.
+ *
+ * Author: Fabio Estevam <fabio.estevam@freescale.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+/ {
+ regulators {
+ compatible = "simple-bus";
+
+ reg_2p5v: 2p5v {
+ compatible = "regulator-fixed";
+ regulator-name = "2P5V";
+ regulator-min-microvolt = <2500000>;
+ regulator-max-microvolt = <2500000>;
+ regulator-always-on;
+ };
+
+ reg_3p3v: 3p3v {
+ compatible = "regulator-fixed";
+ regulator-name = "3P3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+ };
+
+ sound {
+ compatible = "fsl,imx6-wandboard-sgtl5000",
+ "fsl,imx-audio-sgtl5000";
+ model = "imx6-wandboard-sgtl5000";
+ ssi-controller = <&ssi1>;
+ audio-codec = <&codec>;
+ audio-routing =
+ "MIC_IN", "Mic Jack",
+ "Mic Jack", "Mic Bias",
+ "Headphone Jack", "HP_OUT";
+ mux-int-port = <1>;
+ mux-ext-port = <3>;
+ };
+};
+
+&audmux {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_audmux_2>;
+ status = "okay";
+};
+
+&i2c2 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c2_2>;
+ status = "okay";
+
+ codec: sgtl5000@0a {
+ compatible = "fsl,sgtl5000";
+ reg = <0x0a>;
+ clocks = <&clks 201>;
+ VDDA-supply = <®_2p5v>;
+ VDDIO-supply = <®_3p3v>;
+ };
+};
+
+&iomuxc {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_hog>;
+
+ hog {
+ pinctrl_hog: hoggrp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x130b0
+ MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x80000000
+ MX6QDL_PAD_EIM_DA9__GPIO3_IO09 0x80000000
+ MX6QDL_PAD_EIM_EB1__GPIO2_IO29 0x80000000 /* WL_REF_ON */
+ MX6QDL_PAD_EIM_A25__GPIO5_IO02 0x80000000 /* WL_RST_N */
+ MX6QDL_PAD_ENET_RXD1__GPIO1_IO26 0x80000000 /* WL_REG_ON */
+ MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x80000000 /* WL_HOST_WAKE */
+ MX6QDL_PAD_ENET_TXD0__GPIO1_IO30 0x80000000 /* WL_WAKE */
+ >;
+ };
+ };
+};
+
+&fec {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_enet_1>;
+ phy-mode = "rgmii";
+ status = "okay";
+};
+
+&ssi1 {
+ fsl,mode = "i2s-slave";
+ status = "okay";
+};
+
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1_1>;
+ status = "okay";
+};
+
+&uart3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart3_2>;
+ fsl,uart-has-rtscts;
+ status = "okay";
+};
+
+&usbh1 {
+ status = "okay";
+};
+
+&usdhc1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc1_2>;
+ cd-gpios = <&gpio1 2 0>;
+ status = "okay";
+};
+
+&usdhc2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc2_2>;
+ non-removable;
+ status = "okay";
+};
+
+&usdhc3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc3_2>;
+ cd-gpios = <&gpio3 9 0>;
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/imx6qdl.dtsi
index f21d259..ccd55c2 100644
--- a/arch/arm/boot/dts/imx6qdl.dtsi
+++ b/arch/arm/boot/dts/imx6qdl.dtsi
@@ -14,11 +14,6 @@
/ {
aliases {
- serial0 = &uart1;
- serial1 = &uart2;
- serial2 = &uart3;
- serial3 = &uart4;
- serial4 = &uart5;
gpio0 = &gpio1;
gpio1 = &gpio2;
gpio2 = &gpio3;
@@ -26,6 +21,18 @@
gpio4 = &gpio5;
gpio5 = &gpio6;
gpio6 = &gpio7;
+ i2c0 = &i2c1;
+ i2c1 = &i2c2;
+ i2c2 = &i2c3;
+ serial0 = &uart1;
+ serial1 = &uart2;
+ serial2 = &uart3;
+ serial3 = &uart4;
+ serial4 = &uart5;
+ spi0 = &ecspi1;
+ spi1 = &ecspi2;
+ spi2 = &ecspi3;
+ spi3 = &ecspi4;
};
intc: interrupt-controller@00a01000 {
@@ -81,15 +88,14 @@
#size-cells = <1>;
reg = <0x00112000 0x2000>, <0x00114000 0x2000>;
reg-names = "gpmi-nand", "bch";
- interrupts = <0 13 0x04>, <0 15 0x04>;
- interrupt-names = "gpmi-dma", "bch";
+ interrupts = <0 15 0x04>;
+ interrupt-names = "bch";
clocks = <&clks 152>, <&clks 153>, <&clks 151>,
<&clks 150>, <&clks 149>;
clock-names = "gpmi_io", "gpmi_apb", "gpmi_bch",
"gpmi_bch_apb", "per1_bch";
dmas = <&dma_apbh 0>;
dma-names = "rx-tx";
- fsl,gpmi-dma-channel = <0>;
status = "disabled";
};
@@ -184,6 +190,8 @@
interrupts = <0 26 0x04>;
clocks = <&clks 160>, <&clks 161>;
clock-names = "ipg", "per";
+ dmas = <&sdma 25 4 0>, <&sdma 26 4 0>;
+ dma-names = "rx", "tx";
status = "disabled";
};
@@ -197,6 +205,9 @@
reg = <0x02028000 0x4000>;
interrupts = <0 46 0x04>;
clocks = <&clks 178>;
+ dmas = <&sdma 37 1 0>,
+ <&sdma 38 1 0>;
+ dma-names = "rx", "tx";
fsl,fifo-depth = <15>;
fsl,ssi-dma-events = <38 37>;
status = "disabled";
@@ -207,6 +218,9 @@
reg = <0x0202c000 0x4000>;
interrupts = <0 47 0x04>;
clocks = <&clks 179>;
+ dmas = <&sdma 41 1 0>,
+ <&sdma 42 1 0>;
+ dma-names = "rx", "tx";
fsl,fifo-depth = <15>;
fsl,ssi-dma-events = <42 41>;
status = "disabled";
@@ -217,6 +231,9 @@
reg = <0x02030000 0x4000>;
interrupts = <0 48 0x04>;
clocks = <&clks 180>;
+ dmas = <&sdma 45 1 0>,
+ <&sdma 46 1 0>;
+ dma-names = "rx", "tx";
fsl,fifo-depth = <15>;
fsl,ssi-dma-events = <46 45>;
status = "disabled";
@@ -278,17 +295,23 @@
};
can1: flexcan@02090000 {
+ compatible = "fsl,imx6q-flexcan";
reg = <0x02090000 0x4000>;
interrupts = <0 110 0x04>;
+ clocks = <&clks 108>, <&clks 109>;
+ clock-names = "ipg", "per";
};
can2: flexcan@02094000 {
+ compatible = "fsl,imx6q-flexcan";
reg = <0x02094000 0x4000>;
interrupts = <0 111 0x04>;
+ clocks = <&clks 110>, <&clks 111>;
+ clock-names = "ipg", "per";
};
gpt: gpt@02098000 {
- compatible = "fsl,imx6q-gpt";
+ compatible = "fsl,imx6q-gpt", "fsl,imx31-gpt";
reg = <0x02098000 0x4000>;
interrupts = <0 55 0x04>;
clocks = <&clks 119>, <&clks 120>;
@@ -491,6 +514,13 @@
};
};
+ tempmon: tempmon {
+ compatible = "fsl,imx6q-tempmon";
+ interrupts = <0 49 0x04>;
+ fsl,tempmon = <&anatop>;
+ fsl,tempmon-data = <&ocotp>;
+ };
+
usbphy1: usbphy@020c9000 {
compatible = "fsl,imx6q-usbphy", "fsl,imx23-usbphy";
reg = <0x020c9000 0x1000>;
@@ -546,6 +576,713 @@
reg = <0x020e0000 0x38>;
};
+ iomuxc: iomuxc@020e0000 {
+ compatible = "fsl,imx6dl-iomuxc", "fsl,imx6q-iomuxc";
+ reg = <0x020e0000 0x4000>;
+
+ audmux {
+ pinctrl_audmux_1: audmux-1 {
+ fsl,pins = <
+ MX6QDL_PAD_SD2_DAT0__AUD4_RXD 0x80000000
+ MX6QDL_PAD_SD2_DAT3__AUD4_TXC 0x80000000
+ MX6QDL_PAD_SD2_DAT2__AUD4_TXD 0x80000000
+ MX6QDL_PAD_SD2_DAT1__AUD4_TXFS 0x80000000
+ >;
+ };
+
+ pinctrl_audmux_2: audmux-2 {
+ fsl,pins = <
+ MX6QDL_PAD_CSI0_DAT7__AUD3_RXD 0x80000000
+ MX6QDL_PAD_CSI0_DAT4__AUD3_TXC 0x80000000
+ MX6QDL_PAD_CSI0_DAT5__AUD3_TXD 0x80000000
+ MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS 0x80000000
+ >;
+ };
+
+ pinctrl_audmux_3: audmux-3 {
+ fsl,pins = <
+ MX6QDL_PAD_DISP0_DAT16__AUD5_TXC 0x80000000
+ MX6QDL_PAD_DISP0_DAT18__AUD5_TXFS 0x80000000
+ MX6QDL_PAD_DISP0_DAT19__AUD5_RXD 0x80000000
+ >;
+ };
+ };
+
+ ecspi1 {
+ pinctrl_ecspi1_1: ecspi1grp-1 {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_D17__ECSPI1_MISO 0x100b1
+ MX6QDL_PAD_EIM_D18__ECSPI1_MOSI 0x100b1
+ MX6QDL_PAD_EIM_D16__ECSPI1_SCLK 0x100b1
+ >;
+ };
+
+ pinctrl_ecspi1_2: ecspi1grp-2 {
+ fsl,pins = <
+ MX6QDL_PAD_KEY_COL1__ECSPI1_MISO 0x100b1
+ MX6QDL_PAD_KEY_ROW0__ECSPI1_MOSI 0x100b1
+ MX6QDL_PAD_KEY_COL0__ECSPI1_SCLK 0x100b1
+ >;
+ };
+ };
+
+ ecspi3 {
+ pinctrl_ecspi3_1: ecspi3grp-1 {
+ fsl,pins = <
+ MX6QDL_PAD_DISP0_DAT2__ECSPI3_MISO 0x100b1
+ MX6QDL_PAD_DISP0_DAT1__ECSPI3_MOSI 0x100b1
+ MX6QDL_PAD_DISP0_DAT0__ECSPI3_SCLK 0x100b1
+ >;
+ };
+ };
+
+ enet {
+ pinctrl_enet_1: enetgrp-1 {
+ fsl,pins = <
+ MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0
+ MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0
+ MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b0b0
+ MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b0b0
+ MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b0b0
+ MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b0b0
+ MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b0b0
+ MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b0b0
+ MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0
+ MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b0b0
+ MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b0b0
+ MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b0b0
+ MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b0b0
+ MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b0b0
+ MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0
+ MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8
+ >;
+ };
+
+ pinctrl_enet_2: enetgrp-2 {
+ fsl,pins = <
+ MX6QDL_PAD_KEY_COL1__ENET_MDIO 0x1b0b0
+ MX6QDL_PAD_KEY_COL2__ENET_MDC 0x1b0b0
+ MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b0b0
+ MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b0b0
+ MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b0b0
+ MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b0b0
+ MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b0b0
+ MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b0b0
+ MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0
+ MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b0b0
+ MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b0b0
+ MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b0b0
+ MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b0b0
+ MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b0b0
+ MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0
+ >;
+ };
+
+ pinctrl_enet_3: enetgrp-3 {
+ fsl,pins = <
+ MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0
+ MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0
+ MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b0b0
+ MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b0b0
+ MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b0b0
+ MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b0b0
+ MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b0b0
+ MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b0b0
+ MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0
+ MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b0b0
+ MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b0b0
+ MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b0b0
+ MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b0b0
+ MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b0b0
+ MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0
+ MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN 0x1b0b0
+ >;
+ };
+ };
+
+ esai {
+ pinctrl_esai_1: esaigrp-1 {
+ fsl,pins = <
+ MX6QDL_PAD_ENET_RXD0__ESAI_TX_HF_CLK 0x1b030
+ MX6QDL_PAD_ENET_CRS_DV__ESAI_TX_CLK 0x1b030
+ MX6QDL_PAD_ENET_RXD1__ESAI_TX_FS 0x1b030
+ MX6QDL_PAD_ENET_TX_EN__ESAI_TX3_RX2 0x1b030
+ MX6QDL_PAD_ENET_TXD1__ESAI_TX2_RX3 0x1b030
+ MX6QDL_PAD_ENET_TXD0__ESAI_TX4_RX1 0x1b030
+ MX6QDL_PAD_ENET_MDC__ESAI_TX5_RX0 0x1b030
+ MX6QDL_PAD_NANDF_CS2__ESAI_TX0 0x1b030
+ MX6QDL_PAD_NANDF_CS3__ESAI_TX1 0x1b030
+ >;
+ };
+
+ pinctrl_esai_2: esaigrp-2 {
+ fsl,pins = <
+ MX6QDL_PAD_ENET_CRS_DV__ESAI_TX_CLK 0x1b030
+ MX6QDL_PAD_ENET_RXD1__ESAI_TX_FS 0x1b030
+ MX6QDL_PAD_ENET_TX_EN__ESAI_TX3_RX2 0x1b030
+ MX6QDL_PAD_GPIO_5__ESAI_TX2_RX3 0x1b030
+ MX6QDL_PAD_ENET_TXD0__ESAI_TX4_RX1 0x1b030
+ MX6QDL_PAD_ENET_MDC__ESAI_TX5_RX0 0x1b030
+ MX6QDL_PAD_GPIO_17__ESAI_TX0 0x1b030
+ MX6QDL_PAD_NANDF_CS3__ESAI_TX1 0x1b030
+ MX6QDL_PAD_ENET_MDIO__ESAI_RX_CLK 0x1b030
+ MX6QDL_PAD_GPIO_9__ESAI_RX_FS 0x1b030
+ >;
+ };
+ };
+
+ flexcan1 {
+ pinctrl_flexcan1_1: flexcan1grp-1 {
+ fsl,pins = <
+ MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX 0x80000000
+ MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX 0x80000000
+ >;
+ };
+
+ pinctrl_flexcan1_2: flexcan1grp-2 {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_7__FLEXCAN1_TX 0x80000000
+ MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX 0x80000000
+ >;
+ };
+ };
+
+ flexcan2 {
+ pinctrl_flexcan2_1: flexcan2grp-1 {
+ fsl,pins = <
+ MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX 0x80000000
+ MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX 0x80000000
+ >;
+ };
+ };
+
+ gpmi-nand {
+ pinctrl_gpmi_nand_1: gpmi-nand-1 {
+ fsl,pins = <
+ MX6QDL_PAD_NANDF_CLE__NAND_CLE 0xb0b1
+ MX6QDL_PAD_NANDF_ALE__NAND_ALE 0xb0b1
+ MX6QDL_PAD_NANDF_WP_B__NAND_WP_B 0xb0b1
+ MX6QDL_PAD_NANDF_RB0__NAND_READY_B 0xb000
+ MX6QDL_PAD_NANDF_CS0__NAND_CE0_B 0xb0b1
+ MX6QDL_PAD_NANDF_CS1__NAND_CE1_B 0xb0b1
+ MX6QDL_PAD_SD4_CMD__NAND_RE_B 0xb0b1
+ MX6QDL_PAD_SD4_CLK__NAND_WE_B 0xb0b1
+ MX6QDL_PAD_NANDF_D0__NAND_DATA00 0xb0b1
+ MX6QDL_PAD_NANDF_D1__NAND_DATA01 0xb0b1
+ MX6QDL_PAD_NANDF_D2__NAND_DATA02 0xb0b1
+ MX6QDL_PAD_NANDF_D3__NAND_DATA03 0xb0b1
+ MX6QDL_PAD_NANDF_D4__NAND_DATA04 0xb0b1
+ MX6QDL_PAD_NANDF_D5__NAND_DATA05 0xb0b1
+ MX6QDL_PAD_NANDF_D6__NAND_DATA06 0xb0b1
+ MX6QDL_PAD_NANDF_D7__NAND_DATA07 0xb0b1
+ MX6QDL_PAD_SD4_DAT0__NAND_DQS 0x00b1
+ >;
+ };
+ };
+
+ hdmi_hdcp {
+ pinctrl_hdmi_hdcp_1: hdmihdcpgrp-1 {
+ fsl,pins = <
+ MX6QDL_PAD_KEY_COL3__HDMI_TX_DDC_SCL 0x4001b8b1
+ MX6QDL_PAD_KEY_ROW3__HDMI_TX_DDC_SDA 0x4001b8b1
+ >;
+ };
+
+ pinctrl_hdmi_hdcp_2: hdmihdcpgrp-2 {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_EB2__HDMI_TX_DDC_SCL 0x4001b8b1
+ MX6QDL_PAD_EIM_D16__HDMI_TX_DDC_SDA 0x4001b8b1
+ >;
+ };
+
+ pinctrl_hdmi_hdcp_3: hdmihdcpgrp-3 {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_EB2__HDMI_TX_DDC_SCL 0x4001b8b1
+ MX6QDL_PAD_KEY_ROW3__HDMI_TX_DDC_SDA 0x4001b8b1
+ >;
+ };
+ };
+
+ hdmi_cec {
+ pinctrl_hdmi_cec_1: hdmicecgrp-1 {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_A25__HDMI_TX_CEC_LINE 0x1f8b0
+ >;
+ };
+
+ pinctrl_hdmi_cec_2: hdmicecgrp-2 {
+ fsl,pins = <
+ MX6QDL_PAD_KEY_ROW2__HDMI_TX_CEC_LINE 0x1f8b0
+ >;
+ };
+ };
+
+ i2c1 {
+ pinctrl_i2c1_1: i2c1grp-1 {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1
+ MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1
+ >;
+ };
+
+ pinctrl_i2c1_2: i2c1grp-2 {
+ fsl,pins = <
+ MX6QDL_PAD_CSI0_DAT8__I2C1_SDA 0x4001b8b1
+ MX6QDL_PAD_CSI0_DAT9__I2C1_SCL 0x4001b8b1
+ >;
+ };
+ };
+
+ i2c2 {
+ pinctrl_i2c2_1: i2c2grp-1 {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_EB2__I2C2_SCL 0x4001b8b1
+ MX6QDL_PAD_EIM_D16__I2C2_SDA 0x4001b8b1
+ >;
+ };
+
+ pinctrl_i2c2_2: i2c2grp-2 {
+ fsl,pins = <
+ MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
+ MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
+ >;
+ };
+
+ pinctrl_i2c2_3: i2c2grp-3 {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_EB2__I2C2_SCL 0x4001b8b1
+ MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
+ >;
+ };
+ };
+
+ i2c3 {
+ pinctrl_i2c3_1: i2c3grp-1 {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_D17__I2C3_SCL 0x4001b8b1
+ MX6QDL_PAD_EIM_D18__I2C3_SDA 0x4001b8b1
+ >;
+ };
+
+ pinctrl_i2c3_2: i2c3grp-2 {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1
+ MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1
+ >;
+ };
+
+ pinctrl_i2c3_3: i2c3grp-3 {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_5__I2C3_SCL 0x4001b8b1
+ MX6QDL_PAD_GPIO_16__I2C3_SDA 0x4001b8b1
+ >;
+ };
+
+ pinctrl_i2c3_4: i2c3grp-4 {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1
+ MX6QDL_PAD_EIM_D18__I2C3_SDA 0x4001b8b1
+ >;
+ };
+ };
+
+ ipu1 {
+ pinctrl_ipu1_1: ipu1grp-1 {
+ fsl,pins = <
+ MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x10
+ MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15 0x10
+ MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02 0x10
+ MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03 0x10
+ MX6QDL_PAD_DI0_PIN4__IPU1_DI0_PIN04 0x80000000
+ MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00 0x10
+ MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01 0x10
+ MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02 0x10
+ MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03 0x10
+ MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04 0x10
+ MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05 0x10
+ MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06 0x10
+ MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07 0x10
+ MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08 0x10
+ MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09 0x10
+ MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10 0x10
+ MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11 0x10
+ MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12 0x10
+ MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13 0x10
+ MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14 0x10
+ MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15 0x10
+ MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16 0x10
+ MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17 0x10
+ MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18 0x10
+ MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19 0x10
+ MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20 0x10
+ MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21 0x10
+ MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22 0x10
+ MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23 0x10
+ >;
+ };
+
+ pinctrl_ipu1_2: ipu1grp-2 { /* parallel camera */
+ fsl,pins = <
+ MX6QDL_PAD_CSI0_DAT12__IPU1_CSI0_DATA12 0x80000000
+ MX6QDL_PAD_CSI0_DAT13__IPU1_CSI0_DATA13 0x80000000
+ MX6QDL_PAD_CSI0_DAT14__IPU1_CSI0_DATA14 0x80000000
+ MX6QDL_PAD_CSI0_DAT15__IPU1_CSI0_DATA15 0x80000000
+ MX6QDL_PAD_CSI0_DAT16__IPU1_CSI0_DATA16 0x80000000
+ MX6QDL_PAD_CSI0_DAT17__IPU1_CSI0_DATA17 0x80000000
+ MX6QDL_PAD_CSI0_DAT18__IPU1_CSI0_DATA18 0x80000000
+ MX6QDL_PAD_CSI0_DAT19__IPU1_CSI0_DATA19 0x80000000
+ MX6QDL_PAD_CSI0_DATA_EN__IPU1_CSI0_DATA_EN 0x80000000
+ MX6QDL_PAD_CSI0_PIXCLK__IPU1_CSI0_PIXCLK 0x80000000
+ MX6QDL_PAD_CSI0_MCLK__IPU1_CSI0_HSYNC 0x80000000
+ MX6QDL_PAD_CSI0_VSYNC__IPU1_CSI0_VSYNC 0x80000000
+ >;
+ };
+
+ pinctrl_ipu1_3: ipu1grp-3 { /* parallel port 16-bit */
+ fsl,pins = <
+ MX6QDL_PAD_CSI0_DAT4__IPU1_CSI0_DATA04 0x80000000
+ MX6QDL_PAD_CSI0_DAT5__IPU1_CSI0_DATA05 0x80000000
+ MX6QDL_PAD_CSI0_DAT6__IPU1_CSI0_DATA06 0x80000000
+ MX6QDL_PAD_CSI0_DAT7__IPU1_CSI0_DATA07 0x80000000
+ MX6QDL_PAD_CSI0_DAT8__IPU1_CSI0_DATA08 0x80000000
+ MX6QDL_PAD_CSI0_DAT9__IPU1_CSI0_DATA09 0x80000000
+ MX6QDL_PAD_CSI0_DAT10__IPU1_CSI0_DATA10 0x80000000
+ MX6QDL_PAD_CSI0_DAT11__IPU1_CSI0_DATA11 0x80000000
+ MX6QDL_PAD_CSI0_DAT12__IPU1_CSI0_DATA12 0x80000000
+ MX6QDL_PAD_CSI0_DAT13__IPU1_CSI0_DATA13 0x80000000
+ MX6QDL_PAD_CSI0_DAT14__IPU1_CSI0_DATA14 0x80000000
+ MX6QDL_PAD_CSI0_DAT15__IPU1_CSI0_DATA15 0x80000000
+ MX6QDL_PAD_CSI0_DAT16__IPU1_CSI0_DATA16 0x80000000
+ MX6QDL_PAD_CSI0_DAT17__IPU1_CSI0_DATA17 0x80000000
+ MX6QDL_PAD_CSI0_DAT18__IPU1_CSI0_DATA18 0x80000000
+ MX6QDL_PAD_CSI0_DAT19__IPU1_CSI0_DATA19 0x80000000
+ MX6QDL_PAD_CSI0_PIXCLK__IPU1_CSI0_PIXCLK 0x80000000
+ MX6QDL_PAD_CSI0_MCLK__IPU1_CSI0_HSYNC 0x80000000
+ MX6QDL_PAD_CSI0_VSYNC__IPU1_CSI0_VSYNC 0x80000000
+ >;
+ };
+ };
+
+ mlb {
+ pinctrl_mlb_1: mlbgrp-1 {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_3__MLB_CLK 0x71
+ MX6QDL_PAD_GPIO_6__MLB_SIG 0x71
+ MX6QDL_PAD_GPIO_2__MLB_DATA 0x71
+ >;
+ };
+
+ pinctrl_mlb_2: mlbgrp-2 {
+ fsl,pins = <
+ MX6QDL_PAD_ENET_TXD1__MLB_CLK 0x71
+ MX6QDL_PAD_GPIO_6__MLB_SIG 0x71
+ MX6QDL_PAD_GPIO_2__MLB_DATA 0x71
+ >;
+ };
+ };
+
+ pwm0 {
+ pinctrl_pwm0_1: pwm0grp-1 {
+ fsl,pins = <
+ MX6QDL_PAD_SD1_DAT3__PWM1_OUT 0x1b0b1
+ >;
+ };
+ };
+
+ pwm3 {
+ pinctrl_pwm3_1: pwm3grp-1 {
+ fsl,pins = <
+ MX6QDL_PAD_SD4_DAT1__PWM3_OUT 0x1b0b1
+ >;
+ };
+ };
+
+ spdif {
+ pinctrl_spdif_1: spdifgrp-1 {
+ fsl,pins = <
+ MX6QDL_PAD_KEY_COL3__SPDIF_IN 0x1b0b0
+ >;
+ };
+
+ pinctrl_spdif_2: spdifgrp-2 {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_16__SPDIF_IN 0x1b0b0
+ MX6QDL_PAD_GPIO_17__SPDIF_OUT 0x1b0b0
+ >;
+ };
+ };
+
+ uart1 {
+ pinctrl_uart1_1: uart1grp-1 {
+ fsl,pins = <
+ MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0b1
+ MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1
+ >;
+ };
+ };
+
+ uart2 {
+ pinctrl_uart2_1: uart2grp-1 {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_D26__UART2_TX_DATA 0x1b0b1
+ MX6QDL_PAD_EIM_D27__UART2_RX_DATA 0x1b0b1
+ >;
+ };
+
+ pinctrl_uart2_2: uart2grp-2 { /* DTE mode */
+ fsl,pins = <
+ MX6QDL_PAD_EIM_D26__UART2_RX_DATA 0x1b0b1
+ MX6QDL_PAD_EIM_D27__UART2_TX_DATA 0x1b0b1
+ MX6QDL_PAD_EIM_D28__UART2_DTE_CTS_B 0x1b0b1
+ MX6QDL_PAD_EIM_D29__UART2_DTE_RTS_B 0x1b0b1
+ >;
+ };
+ };
+
+ uart3 {
+ pinctrl_uart3_1: uart3grp-1 {
+ fsl,pins = <
+ MX6QDL_PAD_SD4_CLK__UART3_RX_DATA 0x1b0b1
+ MX6QDL_PAD_SD4_CMD__UART3_TX_DATA 0x1b0b1
+ MX6QDL_PAD_EIM_D30__UART3_CTS_B 0x1b0b1
+ MX6QDL_PAD_EIM_EB3__UART3_RTS_B 0x1b0b1
+ >;
+ };
+
+ pinctrl_uart3_2: uart3grp-2 {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1
+ MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b1
+ MX6QDL_PAD_EIM_D23__UART3_CTS_B 0x1b0b1
+ MX6QDL_PAD_EIM_EB3__UART3_RTS_B 0x1b0b1
+ >;
+ };
+ };
+
+ uart4 {
+ pinctrl_uart4_1: uart4grp-1 {
+ fsl,pins = <
+ MX6QDL_PAD_KEY_COL0__UART4_TX_DATA 0x1b0b1
+ MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA 0x1b0b1
+ >;
+ };
+ };
+
+ usbotg {
+ pinctrl_usbotg_1: usbotggrp-1 {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059
+ >;
+ };
+
+ pinctrl_usbotg_2: usbotggrp-2 {
+ fsl,pins = <
+ MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID 0x17059
+ >;
+ };
+ };
+
+ usbh2 {
+ pinctrl_usbh2_1: usbh2grp-1 {
+ fsl,pins = <
+ MX6QDL_PAD_RGMII_TXC__USB_H2_DATA 0x40013030
+ MX6QDL_PAD_RGMII_TX_CTL__USB_H2_STROBE 0x40013030
+ >;
+ };
+
+ pinctrl_usbh2_2: usbh2grp-2 {
+ fsl,pins = <
+ MX6QDL_PAD_RGMII_TX_CTL__USB_H2_STROBE 0x40017030
+ >;
+ };
+ };
+
+ usbh3 {
+ pinctrl_usbh3_1: usbh3grp-1 {
+ fsl,pins = <
+ MX6QDL_PAD_RGMII_RX_CTL__USB_H3_DATA 0x40013030
+ MX6QDL_PAD_RGMII_RXC__USB_H3_STROBE 0x40013030
+ >;
+ };
+
+ pinctrl_usbh3_2: usbh3grp-2 {
+ fsl,pins = <
+ MX6QDL_PAD_RGMII_RXC__USB_H3_STROBE 0x40017030
+ >;
+ };
+ };
+
+ usdhc1 {
+ pinctrl_usdhc1_1: usdhc1grp-1 {
+ fsl,pins = <
+ MX6QDL_PAD_SD1_CMD__SD1_CMD 0x17059
+ MX6QDL_PAD_SD1_CLK__SD1_CLK 0x10059
+ MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x17059
+ MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x17059
+ MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x17059
+ MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x17059
+ MX6QDL_PAD_NANDF_D0__SD1_DATA4 0x17059
+ MX6QDL_PAD_NANDF_D1__SD1_DATA5 0x17059
+ MX6QDL_PAD_NANDF_D2__SD1_DATA6 0x17059
+ MX6QDL_PAD_NANDF_D3__SD1_DATA7 0x17059
+ >;
+ };
+
+ pinctrl_usdhc1_2: usdhc1grp-2 {
+ fsl,pins = <
+ MX6QDL_PAD_SD1_CMD__SD1_CMD 0x17059
+ MX6QDL_PAD_SD1_CLK__SD1_CLK 0x10059
+ MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x17059
+ MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x17059
+ MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x17059
+ MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x17059
+ >;
+ };
+ };
+
+ usdhc2 {
+ pinctrl_usdhc2_1: usdhc2grp-1 {
+ fsl,pins = <
+ MX6QDL_PAD_SD2_CMD__SD2_CMD 0x17059
+ MX6QDL_PAD_SD2_CLK__SD2_CLK 0x10059
+ MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059
+ MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059
+ MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059
+ MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17059
+ MX6QDL_PAD_NANDF_D4__SD2_DATA4 0x17059
+ MX6QDL_PAD_NANDF_D5__SD2_DATA5 0x17059
+ MX6QDL_PAD_NANDF_D6__SD2_DATA6 0x17059
+ MX6QDL_PAD_NANDF_D7__SD2_DATA7 0x17059
+ >;
+ };
+
+ pinctrl_usdhc2_2: usdhc2grp-2 {
+ fsl,pins = <
+ MX6QDL_PAD_SD2_CMD__SD2_CMD 0x17059
+ MX6QDL_PAD_SD2_CLK__SD2_CLK 0x10059
+ MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059
+ MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059
+ MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059
+ MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17059
+ >;
+ };
+ };
+
+ usdhc3 {
+ pinctrl_usdhc3_1: usdhc3grp-1 {
+ fsl,pins = <
+ MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059
+ MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059
+ MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059
+ MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059
+ MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059
+ MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059
+ MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x17059
+ MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x17059
+ MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x17059
+ MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x17059
+ >;
+ };
+
+ pinctrl_usdhc3_2: usdhc3grp-2 {
+ fsl,pins = <
+ MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059
+ MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059
+ MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059
+ MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059
+ MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059
+ MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059
+ >;
+ };
+ };
+
+ usdhc4 {
+ pinctrl_usdhc4_1: usdhc4grp-1 {
+ fsl,pins = <
+ MX6QDL_PAD_SD4_CMD__SD4_CMD 0x17059
+ MX6QDL_PAD_SD4_CLK__SD4_CLK 0x10059
+ MX6QDL_PAD_SD4_DAT0__SD4_DATA0 0x17059
+ MX6QDL_PAD_SD4_DAT1__SD4_DATA1 0x17059
+ MX6QDL_PAD_SD4_DAT2__SD4_DATA2 0x17059
+ MX6QDL_PAD_SD4_DAT3__SD4_DATA3 0x17059
+ MX6QDL_PAD_SD4_DAT4__SD4_DATA4 0x17059
+ MX6QDL_PAD_SD4_DAT5__SD4_DATA5 0x17059
+ MX6QDL_PAD_SD4_DAT6__SD4_DATA6 0x17059
+ MX6QDL_PAD_SD4_DAT7__SD4_DATA7 0x17059
+ >;
+ };
+
+ pinctrl_usdhc4_2: usdhc4grp-2 {
+ fsl,pins = <
+ MX6QDL_PAD_SD4_CMD__SD4_CMD 0x17059
+ MX6QDL_PAD_SD4_CLK__SD4_CLK 0x10059
+ MX6QDL_PAD_SD4_DAT0__SD4_DATA0 0x17059
+ MX6QDL_PAD_SD4_DAT1__SD4_DATA1 0x17059
+ MX6QDL_PAD_SD4_DAT2__SD4_DATA2 0x17059
+ MX6QDL_PAD_SD4_DAT3__SD4_DATA3 0x17059
+ >;
+ };
+ };
+
+ weim {
+ pinctrl_weim_cs0_1: weim_cs0grp-1 {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_CS0__EIM_CS0_B 0xb0b1
+ >;
+ };
+
+ pinctrl_weim_nor_1: weim_norgrp-1 {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_OE__EIM_OE_B 0xb0b1
+ MX6QDL_PAD_EIM_RW__EIM_RW 0xb0b1
+ MX6QDL_PAD_EIM_WAIT__EIM_WAIT_B 0xb060
+ /* data */
+ MX6QDL_PAD_EIM_D16__EIM_DATA16 0x1b0b0
+ MX6QDL_PAD_EIM_D17__EIM_DATA17 0x1b0b0
+ MX6QDL_PAD_EIM_D18__EIM_DATA18 0x1b0b0
+ MX6QDL_PAD_EIM_D19__EIM_DATA19 0x1b0b0
+ MX6QDL_PAD_EIM_D20__EIM_DATA20 0x1b0b0
+ MX6QDL_PAD_EIM_D21__EIM_DATA21 0x1b0b0
+ MX6QDL_PAD_EIM_D22__EIM_DATA22 0x1b0b0
+ MX6QDL_PAD_EIM_D23__EIM_DATA23 0x1b0b0
+ MX6QDL_PAD_EIM_D24__EIM_DATA24 0x1b0b0
+ MX6QDL_PAD_EIM_D25__EIM_DATA25 0x1b0b0
+ MX6QDL_PAD_EIM_D26__EIM_DATA26 0x1b0b0
+ MX6QDL_PAD_EIM_D27__EIM_DATA27 0x1b0b0
+ MX6QDL_PAD_EIM_D28__EIM_DATA28 0x1b0b0
+ MX6QDL_PAD_EIM_D29__EIM_DATA29 0x1b0b0
+ MX6QDL_PAD_EIM_D30__EIM_DATA30 0x1b0b0
+ MX6QDL_PAD_EIM_D31__EIM_DATA31 0x1b0b0
+ /* address */
+ MX6QDL_PAD_EIM_A23__EIM_ADDR23 0xb0b1
+ MX6QDL_PAD_EIM_A22__EIM_ADDR22 0xb0b1
+ MX6QDL_PAD_EIM_A21__EIM_ADDR21 0xb0b1
+ MX6QDL_PAD_EIM_A20__EIM_ADDR20 0xb0b1
+ MX6QDL_PAD_EIM_A19__EIM_ADDR19 0xb0b1
+ MX6QDL_PAD_EIM_A18__EIM_ADDR18 0xb0b1
+ MX6QDL_PAD_EIM_A17__EIM_ADDR17 0xb0b1
+ MX6QDL_PAD_EIM_A16__EIM_ADDR16 0xb0b1
+ MX6QDL_PAD_EIM_DA15__EIM_AD15 0xb0b1
+ MX6QDL_PAD_EIM_DA14__EIM_AD14 0xb0b1
+ MX6QDL_PAD_EIM_DA13__EIM_AD13 0xb0b1
+ MX6QDL_PAD_EIM_DA12__EIM_AD12 0xb0b1
+ MX6QDL_PAD_EIM_DA11__EIM_AD11 0xb0b1
+ MX6QDL_PAD_EIM_DA10__EIM_AD10 0xb0b1
+ MX6QDL_PAD_EIM_DA9__EIM_AD09 0xb0b1
+ MX6QDL_PAD_EIM_DA8__EIM_AD08 0xb0b1
+ MX6QDL_PAD_EIM_DA7__EIM_AD07 0xb0b1
+ MX6QDL_PAD_EIM_DA6__EIM_AD06 0xb0b1
+ MX6QDL_PAD_EIM_DA5__EIM_AD05 0xb0b1
+ MX6QDL_PAD_EIM_DA4__EIM_AD04 0xb0b1
+ MX6QDL_PAD_EIM_DA3__EIM_AD03 0xb0b1
+ MX6QDL_PAD_EIM_DA2__EIM_AD02 0xb0b1
+ MX6QDL_PAD_EIM_DA1__EIM_AD01 0xb0b1
+ MX6QDL_PAD_EIM_DA0__EIM_AD00 0xb0b1
+ >;
+ };
+ };
+ };
+
ldb: ldb@020e0008 {
#address-cells = <1>;
#size-cells = <0>;
@@ -555,13 +1292,11 @@
lvds-channel@0 {
reg = <0>;
- crtcs = <&ipu1 0>;
status = "disabled";
};
lvds-channel@1 {
reg = <1>;
- crtcs = <&ipu1 1>;
status = "disabled";
};
};
@@ -582,6 +1317,7 @@
interrupts = <0 2 0x04>;
clocks = <&clks 155>, <&clks 155>;
clock-names = "ipg", "ahb";
+ #dma-cells = <3>;
fsl,sdma-ram-script-name = "imx/sdma/sdma-imx6q.bin";
};
};
@@ -751,8 +1487,8 @@
clocks = <&clks 196>;
};
- ocotp@021bc000 {
- compatible = "fsl,imx6q-ocotp";
+ ocotp: ocotp@021bc000 {
+ compatible = "fsl,imx6q-ocotp", "syscon";
reg = <0x021bc000 0x4000>;
};
@@ -791,6 +1527,8 @@
interrupts = <0 27 0x04>;
clocks = <&clks 160>, <&clks 161>;
clock-names = "ipg", "per";
+ dmas = <&sdma 27 4 0>, <&sdma 28 4 0>;
+ dma-names = "rx", "tx";
status = "disabled";
};
@@ -800,6 +1538,8 @@
interrupts = <0 28 0x04>;
clocks = <&clks 160>, <&clks 161>;
clock-names = "ipg", "per";
+ dmas = <&sdma 29 4 0>, <&sdma 30 4 0>;
+ dma-names = "rx", "tx";
status = "disabled";
};
@@ -809,6 +1549,8 @@
interrupts = <0 29 0x04>;
clocks = <&clks 160>, <&clks 161>;
clock-names = "ipg", "per";
+ dmas = <&sdma 31 4 0>, <&sdma 32 4 0>;
+ dma-names = "rx", "tx";
status = "disabled";
};
@@ -818,6 +1560,8 @@
interrupts = <0 30 0x04>;
clocks = <&clks 160>, <&clks 161>;
clock-names = "ipg", "per";
+ dmas = <&sdma 33 4 0>, <&sdma 34 4 0>;
+ dma-names = "rx", "tx";
status = "disabled";
};
};
diff --git a/arch/arm/boot/dts/imx6sl.dtsi b/arch/arm/boot/dts/imx6sl.dtsi
index c5e5da0..c46651e 100644
--- a/arch/arm/boot/dts/imx6sl.dtsi
+++ b/arch/arm/boot/dts/imx6sl.dtsi
@@ -152,32 +152,41 @@
};
uart5: serial@02018000 {
- compatible = "fsl,imx6sl-uart", "fsl,imx21-uart";
+ compatible = "fsl,imx6sl-uart",
+ "fsl,imx6q-uart", "fsl,imx21-uart";
reg = <0x02018000 0x4000>;
interrupts = <0 30 0x04>;
clocks = <&clks IMX6SL_CLK_UART>,
<&clks IMX6SL_CLK_UART_SERIAL>;
clock-names = "ipg", "per";
+ dmas = <&sdma 33 4 0>, <&sdma 34 4 0>;
+ dma-names = "rx", "tx";
status = "disabled";
};
uart1: serial@02020000 {
- compatible = "fsl,imx6sl-uart", "fsl,imx21-uart";
+ compatible = "fsl,imx6sl-uart",
+ "fsl,imx6q-uart", "fsl,imx21-uart";
reg = <0x02020000 0x4000>;
interrupts = <0 26 0x04>;
clocks = <&clks IMX6SL_CLK_UART>,
<&clks IMX6SL_CLK_UART_SERIAL>;
clock-names = "ipg", "per";
+ dmas = <&sdma 25 4 0>, <&sdma 26 4 0>;
+ dma-names = "rx", "tx";
status = "disabled";
};
uart2: serial@02024000 {
- compatible = "fsl,imx6sl-uart", "fsl,imx21-uart";
+ compatible = "fsl,imx6sl-uart",
+ "fsl,imx6q-uart", "fsl,imx21-uart";
reg = <0x02024000 0x4000>;
interrupts = <0 27 0x04>;
clocks = <&clks IMX6SL_CLK_UART>,
<&clks IMX6SL_CLK_UART_SERIAL>;
clock-names = "ipg", "per";
+ dmas = <&sdma 27 4 0>, <&sdma 28 4 0>;
+ dma-names = "rx", "tx";
status = "disabled";
};
@@ -186,6 +195,9 @@
reg = <0x02028000 0x4000>;
interrupts = <0 46 0x04>;
clocks = <&clks IMX6SL_CLK_SSI1>;
+ dmas = <&sdma 37 1 0>,
+ <&sdma 38 1 0>;
+ dma-names = "rx", "tx";
fsl,fifo-depth = <15>;
status = "disabled";
};
@@ -195,6 +207,9 @@
reg = <0x0202c000 0x4000>;
interrupts = <0 47 0x04>;
clocks = <&clks IMX6SL_CLK_SSI2>;
+ dmas = <&sdma 41 1 0>,
+ <&sdma 42 1 0>;
+ dma-names = "rx", "tx";
fsl,fifo-depth = <15>;
status = "disabled";
};
@@ -204,27 +219,36 @@
reg = <0x02030000 0x4000>;
interrupts = <0 48 0x04>;
clocks = <&clks IMX6SL_CLK_SSI3>;
+ dmas = <&sdma 45 1 0>,
+ <&sdma 46 1 0>;
+ dma-names = "rx", "tx";
fsl,fifo-depth = <15>;
status = "disabled";
};
uart3: serial@02034000 {
- compatible = "fsl,imx6sl-uart", "fsl,imx21-uart";
+ compatible = "fsl,imx6sl-uart",
+ "fsl,imx6q-uart", "fsl,imx21-uart";
reg = <0x02034000 0x4000>;
interrupts = <0 28 0x04>;
clocks = <&clks IMX6SL_CLK_UART>,
<&clks IMX6SL_CLK_UART_SERIAL>;
clock-names = "ipg", "per";
+ dmas = <&sdma 29 4 0>, <&sdma 30 4 0>;
+ dma-names = "rx", "tx";
status = "disabled";
};
uart4: serial@02038000 {
- compatible = "fsl,imx6sl-uart", "fsl,imx21-uart";
+ compatible = "fsl,imx6sl-uart",
+ "fsl,imx6q-uart", "fsl,imx21-uart";
reg = <0x02038000 0x4000>;
interrupts = <0 29 0x04>;
clocks = <&clks IMX6SL_CLK_UART>,
<&clks IMX6SL_CLK_UART_SERIAL>;
clock-names = "ipg", "per";
+ dmas = <&sdma 31 4 0>, <&sdma 32 4 0>;
+ dma-names = "rx", "tx";
status = "disabled";
};
};
@@ -594,6 +618,7 @@
clocks = <&clks IMX6SL_CLK_SDMA>,
<&clks IMX6SL_CLK_SDMA>;
clock-names = "ipg", "ahb";
+ #dma-cells = <3>;
fsl,sdma-ram-script-name = "imx/sdma/sdma-imx6sl.bin";
};
diff --git a/arch/arm/boot/dts/kirkwood-6281.dtsi b/arch/arm/boot/dts/kirkwood-6281.dtsi
index 1e5bef0..650ef30 100644
--- a/arch/arm/boot/dts/kirkwood-6281.dtsi
+++ b/arch/arm/boot/dts/kirkwood-6281.dtsi
@@ -1,4 +1,39 @@
/ {
+ mbus {
+ pcie-controller {
+ compatible = "marvell,kirkwood-pcie";
+ status = "disabled";
+ device_type = "pci";
+
+ #address-cells = <3>;
+ #size-cells = <2>;
+
+ bus-range = <0x00 0xff>;
+
+ ranges =
+ <0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000
+ 0x82000000 0x1 0 MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 0.0 MEM */
+ 0x81000000 0x1 0 MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 0.0 IO */>;
+
+ pcie@1,0 {
+ device_type = "pci";
+ assigned-addresses = <0x82000800 0 0x00040000 0 0x2000>;
+ reg = <0x0800 0 0 0 0>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+ ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
+ 0x81000000 0 0 0x81000000 0x1 0 1 0>;
+ interrupt-map-mask = <0 0 0 0>;
+ interrupt-map = <0 0 0 0 &intc 9>;
+ marvell,pcie-port = <0>;
+ marvell,pcie-lane = <0>;
+ clocks = <&gate_clk 2>;
+ status = "disabled";
+ };
+ };
+ };
+
ocp@f1000000 {
pinctrl: pinctrl@10000 {
compatible = "marvell,88f6281-pinctrl";
@@ -41,37 +76,6 @@
};
};
- pcie-controller {
- compatible = "marvell,kirkwood-pcie";
- status = "disabled";
- device_type = "pci";
-
- #address-cells = <3>;
- #size-cells = <2>;
-
- bus-range = <0x00 0xff>;
-
- ranges = <0x82000000 0 0x00040000 0x00040000 0 0x00002000 /* Port 0.0 registers */
- 0x82000000 0 0xe0000000 0xe0000000 0 0x08000000 /* non-prefetchable memory */
- 0x81000000 0 0 0xe8000000 0 0x00100000>; /* downstream I/O */
-
- pcie@1,0 {
- device_type = "pci";
- assigned-addresses = <0x82000800 0 0x00040000 0 0x2000>;
- reg = <0x0800 0 0 0 0>;
- #address-cells = <3>;
- #size-cells = <2>;
- #interrupt-cells = <1>;
- ranges;
- interrupt-map-mask = <0 0 0 0>;
- interrupt-map = <0 0 0 0 &intc 9>;
- marvell,pcie-port = <0>;
- marvell,pcie-lane = <0>;
- clocks = <&gate_clk 2>;
- status = "disabled";
- };
- };
-
rtc@10300 {
compatible = "marvell,kirkwood-rtc", "marvell,orion-rtc";
reg = <0x10300 0x20>;
diff --git a/arch/arm/boot/dts/kirkwood-6282.dtsi b/arch/arm/boot/dts/kirkwood-6282.dtsi
index a63a111..3933a33 100644
--- a/arch/arm/boot/dts/kirkwood-6282.dtsi
+++ b/arch/arm/boot/dts/kirkwood-6282.dtsi
@@ -1,4 +1,59 @@
/ {
+ mbus {
+ pcie-controller {
+ compatible = "marvell,kirkwood-pcie";
+ status = "disabled";
+ device_type = "pci";
+
+ #address-cells = <3>;
+ #size-cells = <2>;
+
+ bus-range = <0x00 0xff>;
+
+ ranges =
+ <0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000
+ 0x82000000 0 0x44000 MBUS_ID(0xf0, 0x01) 0x44000 0 0x00002000
+ 0x82000000 0 0x80000 MBUS_ID(0xf0, 0x01) 0x80000 0 0x00002000
+ 0x82000000 0x1 0 MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 0.0 MEM */
+ 0x81000000 0x1 0 MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 0.0 IO */
+ 0x82000000 0x2 0 MBUS_ID(0x04, 0xd8) 0 1 0 /* Port 1.0 MEM */
+ 0x81000000 0x2 0 MBUS_ID(0x04, 0xd0) 0 1 0 /* Port 1.0 IO */>;
+
+ pcie@1,0 {
+ device_type = "pci";
+ assigned-addresses = <0x82000800 0 0x00040000 0 0x2000>;
+ reg = <0x0800 0 0 0 0>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+ ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
+ 0x81000000 0 0 0x81000000 0x1 0 1 0>;
+ interrupt-map-mask = <0 0 0 0>;
+ interrupt-map = <0 0 0 0 &intc 9>;
+ marvell,pcie-port = <0>;
+ marvell,pcie-lane = <0>;
+ clocks = <&gate_clk 2>;
+ status = "disabled";
+ };
+
+ pcie@2,0 {
+ device_type = "pci";
+ assigned-addresses = <0x82001000 0 0x00044000 0 0x2000>;
+ reg = <0x1000 0 0 0 0>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+ ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
+ 0x81000000 0 0 0x81000000 0x2 0 1 0>;
+ interrupt-map-mask = <0 0 0 0>;
+ interrupt-map = <0 0 0 0 &intc 10>;
+ marvell,pcie-port = <1>;
+ marvell,pcie-lane = <0>;
+ clocks = <&gate_clk 18>;
+ status = "disabled";
+ };
+ };
+ };
ocp@f1000000 {
pinctrl: pinctrl@10000 {
@@ -94,52 +149,5 @@
status = "disabled";
};
- pcie-controller {
- compatible = "marvell,kirkwood-pcie";
- status = "disabled";
- device_type = "pci";
-
- #address-cells = <3>;
- #size-cells = <2>;
-
- bus-range = <0x00 0xff>;
-
- ranges = <0x82000000 0 0x00040000 0x00040000 0 0x00002000 /* Port 0.0 registers */
- 0x82000000 0 0x00044000 0x00044000 0 0x00002000 /* Port 1.0 registers */
- 0x82000000 0 0xe0000000 0xe0000000 0 0x08000000 /* non-prefetchable memory */
- 0x81000000 0 0 0xe8000000 0 0x00100000>; /* downstream I/O */
-
- pcie@1,0 {
- device_type = "pci";
- assigned-addresses = <0x82000800 0 0x00040000 0 0x2000>;
- reg = <0x0800 0 0 0 0>;
- #address-cells = <3>;
- #size-cells = <2>;
- #interrupt-cells = <1>;
- ranges;
- interrupt-map-mask = <0 0 0 0>;
- interrupt-map = <0 0 0 0 &intc 9>;
- marvell,pcie-port = <0>;
- marvell,pcie-lane = <0>;
- clocks = <&gate_clk 2>;
- status = "disabled";
- };
-
- pcie@2,0 {
- device_type = "pci";
- assigned-addresses = <0x82001000 0 0x00044000 0 0x2000>;
- reg = <0x1000 0 0 0 0>;
- #address-cells = <3>;
- #size-cells = <2>;
- #interrupt-cells = <1>;
- ranges;
- interrupt-map-mask = <0 0 0 0>;
- interrupt-map = <0 0 0 0 &intc 10>;
- marvell,pcie-port = <1>;
- marvell,pcie-lane = <0>;
- clocks = <&gate_clk 18>;
- status = "disabled";
- };
- };
};
};
diff --git a/arch/arm/boot/dts/kirkwood-cloudbox.dts b/arch/arm/boot/dts/kirkwood-cloudbox.dts
index 00c48d2..9bf139c 100644
--- a/arch/arm/boot/dts/kirkwood-cloudbox.dts
+++ b/arch/arm/boot/dts/kirkwood-cloudbox.dts
@@ -1,7 +1,7 @@
/dts-v1/;
-/include/ "kirkwood.dtsi"
-/include/ "kirkwood-6281.dtsi"
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
/ {
model = "LaCie CloudBox";
diff --git a/arch/arm/boot/dts/kirkwood-db-88f6281.dts b/arch/arm/boot/dts/kirkwood-db-88f6281.dts
index 9d777ed..72c4b0a 100644
--- a/arch/arm/boot/dts/kirkwood-db-88f6281.dts
+++ b/arch/arm/boot/dts/kirkwood-db-88f6281.dts
@@ -11,14 +11,15 @@
/dts-v1/;
-/include/ "kirkwood-db.dtsi"
-/include/ "kirkwood-6281.dtsi"
+#include "kirkwood-db.dtsi"
+#include "kirkwood-6281.dtsi"
/ {
model = "Marvell DB-88F6281-BP Development Board";
compatible = "marvell,db-88f6281-bp", "marvell,kirkwood-88f6281", "marvell,kirkwood";
- ocp@f1000000 {
+ mbus {
+ ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000>;
pcie-controller {
status = "okay";
diff --git a/arch/arm/boot/dts/kirkwood-db-88f6282.dts b/arch/arm/boot/dts/kirkwood-db-88f6282.dts
index f4c8528..36c411d 100644
--- a/arch/arm/boot/dts/kirkwood-db-88f6282.dts
+++ b/arch/arm/boot/dts/kirkwood-db-88f6282.dts
@@ -11,14 +11,15 @@
/dts-v1/;
-/include/ "kirkwood-db.dtsi"
-/include/ "kirkwood-6282.dtsi"
+#include "kirkwood-db.dtsi"
+#include "kirkwood-6282.dtsi"
/ {
model = "Marvell DB-88F6282-BP Development Board";
compatible = "marvell,db-88f6282-bp", "marvell,kirkwood-88f6282", "marvell,kirkwood";
- ocp@f1000000 {
+ mbus {
+ ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000>;
pcie-controller {
status = "okay";
diff --git a/arch/arm/boot/dts/kirkwood-db.dtsi b/arch/arm/boot/dts/kirkwood-db.dtsi
index c87cfb8..45c1bf7 100644
--- a/arch/arm/boot/dts/kirkwood-db.dtsi
+++ b/arch/arm/boot/dts/kirkwood-db.dtsi
@@ -12,7 +12,7 @@
* and 6282 variants of the Marvell Kirkwood Development Board.
*/
-/include/ "kirkwood.dtsi"
+#include "kirkwood.dtsi"
/ {
memory {
@@ -77,13 +77,5 @@
cd-gpios = <&gpio1 6 0>;
status = "okay";
};
-
- pcie-controller {
- status = "okay";
-
- pcie@1,0 {
- status = "okay";
- };
- };
};
};
diff --git a/arch/arm/boot/dts/kirkwood-dns320.dts b/arch/arm/boot/dts/kirkwood-dns320.dts
index 14d4cee..e112ca6 100644
--- a/arch/arm/boot/dts/kirkwood-dns320.dts
+++ b/arch/arm/boot/dts/kirkwood-dns320.dts
@@ -1,6 +1,6 @@
/dts-v1/;
-/include/ "kirkwood-dnskw.dtsi"
+#include "kirkwood-dnskw.dtsi"
/ {
model = "D-Link DNS-320 NAS (Rev A1)";
diff --git a/arch/arm/boot/dts/kirkwood-dns325.dts b/arch/arm/boot/dts/kirkwood-dns325.dts
index 6387257..5119fb8 100644
--- a/arch/arm/boot/dts/kirkwood-dns325.dts
+++ b/arch/arm/boot/dts/kirkwood-dns325.dts
@@ -1,6 +1,6 @@
/dts-v1/;
-/include/ "kirkwood-dnskw.dtsi"
+#include "kirkwood-dnskw.dtsi"
/ {
model = "D-Link DNS-325 NAS (Rev A1)";
diff --git a/arch/arm/boot/dts/kirkwood-dnskw.dtsi b/arch/arm/boot/dts/kirkwood-dnskw.dtsi
index 0afe1d0..2e04284 100644
--- a/arch/arm/boot/dts/kirkwood-dnskw.dtsi
+++ b/arch/arm/boot/dts/kirkwood-dnskw.dtsi
@@ -1,5 +1,5 @@
-/include/ "kirkwood.dtsi"
-/include/ "kirkwood-6281.dtsi"
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
/ {
model = "D-Link DNS NASes (kirkwood-based)";
diff --git a/arch/arm/boot/dts/kirkwood-dockstar.dts b/arch/arm/boot/dts/kirkwood-dockstar.dts
index 7714742..4387ae8 100644
--- a/arch/arm/boot/dts/kirkwood-dockstar.dts
+++ b/arch/arm/boot/dts/kirkwood-dockstar.dts
@@ -1,7 +1,7 @@
/dts-v1/;
-/include/ "kirkwood.dtsi"
-/include/ "kirkwood-6281.dtsi"
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
/ {
model = "Seagate FreeAgent Dockstar";
diff --git a/arch/arm/boot/dts/kirkwood-dreamplug.dts b/arch/arm/boot/dts/kirkwood-dreamplug.dts
index 36c7ba3..c628378 100644
--- a/arch/arm/boot/dts/kirkwood-dreamplug.dts
+++ b/arch/arm/boot/dts/kirkwood-dreamplug.dts
@@ -1,7 +1,7 @@
/dts-v1/;
-/include/ "kirkwood.dtsi"
-/include/ "kirkwood-6281.dtsi"
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
/ {
model = "Globalscale Technologies Dreamplug";
diff --git a/arch/arm/boot/dts/kirkwood-goflexnet.dts b/arch/arm/boot/dts/kirkwood-goflexnet.dts
index 31caa64..e571180 100644
--- a/arch/arm/boot/dts/kirkwood-goflexnet.dts
+++ b/arch/arm/boot/dts/kirkwood-goflexnet.dts
@@ -1,7 +1,7 @@
/dts-v1/;
-/include/ "kirkwood.dtsi"
-/include/ "kirkwood-6281.dtsi"
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
/ {
model = "Seagate GoFlex Net";
diff --git a/arch/arm/boot/dts/kirkwood-guruplug-server-plus.dts b/arch/arm/boot/dts/kirkwood-guruplug-server-plus.dts
index 1e642f3..2c5673a 100644
--- a/arch/arm/boot/dts/kirkwood-guruplug-server-plus.dts
+++ b/arch/arm/boot/dts/kirkwood-guruplug-server-plus.dts
@@ -1,7 +1,7 @@
/dts-v1/;
-/include/ "kirkwood.dtsi"
-/include/ "kirkwood-6281.dtsi"
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
/ {
model = "Globalscale Technologies Guruplug Server Plus";
diff --git a/arch/arm/boot/dts/kirkwood-ib62x0.dts b/arch/arm/boot/dts/kirkwood-ib62x0.dts
index 20c4b08..158161f 100644
--- a/arch/arm/boot/dts/kirkwood-ib62x0.dts
+++ b/arch/arm/boot/dts/kirkwood-ib62x0.dts
@@ -1,7 +1,7 @@
/dts-v1/;
-/include/ "kirkwood.dtsi"
-/include/ "kirkwood-6281.dtsi"
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
/ {
model = "RaidSonic ICY BOX IB-NAS62x0 (Rev B)";
diff --git a/arch/arm/boot/dts/kirkwood-iconnect.dts b/arch/arm/boot/dts/kirkwood-iconnect.dts
index 441204e..8314118 100644
--- a/arch/arm/boot/dts/kirkwood-iconnect.dts
+++ b/arch/arm/boot/dts/kirkwood-iconnect.dts
@@ -1,7 +1,7 @@
/dts-v1/;
-/include/ "kirkwood.dtsi"
-/include/ "kirkwood-6281.dtsi"
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
/ {
model = "Iomega Iconnect";
@@ -18,6 +18,17 @@
linux,initrd-end = <0x4800000>;
};
+ mbus {
+ ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000>;
+ pcie-controller {
+ status = "okay";
+
+ pcie@1,0 {
+ status = "okay";
+ };
+ };
+ };
+
ocp@f1000000 {
pinctrl: pinctrl@10000 {
pmx_button_reset: pmx-button-reset {
@@ -101,14 +112,6 @@
reg = <0x980000 0x1f400000>;
};
};
-
- pcie-controller {
- status = "okay";
-
- pcie@1,0 {
- status = "okay";
- };
- };
};
gpio-leds {
diff --git a/arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts b/arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts
index 00a7bfe..fd7f053 100644
--- a/arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts
+++ b/arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts
@@ -1,7 +1,7 @@
/dts-v1/;
-/include/ "kirkwood.dtsi"
-/include/ "kirkwood-6281.dtsi"
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
/ {
model = "Iomega StorCenter ix2-200";
diff --git a/arch/arm/boot/dts/kirkwood-is2.dts b/arch/arm/boot/dts/kirkwood-is2.dts
index c3f036b..bd88a23 100644
--- a/arch/arm/boot/dts/kirkwood-is2.dts
+++ b/arch/arm/boot/dts/kirkwood-is2.dts
@@ -1,6 +1,6 @@
/dts-v1/;
-/include/ "kirkwood-ns2-common.dtsi"
+#include "kirkwood-ns2-common.dtsi"
/ {
model = "LaCie Internet Space v2";
diff --git a/arch/arm/boot/dts/kirkwood-km_kirkwood.dts b/arch/arm/boot/dts/kirkwood-km_kirkwood.dts
index 5d9f5ea..b071d37 100644
--- a/arch/arm/boot/dts/kirkwood-km_kirkwood.dts
+++ b/arch/arm/boot/dts/kirkwood-km_kirkwood.dts
@@ -1,7 +1,7 @@
/dts-v1/;
-/include/ "kirkwood.dtsi"
-/include/ "kirkwood-98dx4122.dtsi"
+#include "kirkwood.dtsi"
+#include "kirkwood-98dx4122.dtsi"
/ {
model = "Keymile Kirkwood Reference Design";
diff --git a/arch/arm/boot/dts/kirkwood-lschlv2.dts b/arch/arm/boot/dts/kirkwood-lschlv2.dts
index 9f55d95..e2fa368 100644
--- a/arch/arm/boot/dts/kirkwood-lschlv2.dts
+++ b/arch/arm/boot/dts/kirkwood-lschlv2.dts
@@ -1,6 +1,6 @@
/dts-v1/;
-/include/ "kirkwood-lsxl.dtsi"
+#include "kirkwood-lsxl.dtsi"
/ {
model = "Buffalo Linkstation LS-CHLv2";
diff --git a/arch/arm/boot/dts/kirkwood-lsxhl.dts b/arch/arm/boot/dts/kirkwood-lsxhl.dts
index 5c84c11..8d89cdf 100644
--- a/arch/arm/boot/dts/kirkwood-lsxhl.dts
+++ b/arch/arm/boot/dts/kirkwood-lsxhl.dts
@@ -1,6 +1,6 @@
/dts-v1/;
-/include/ "kirkwood-lsxl.dtsi"
+#include "kirkwood-lsxl.dtsi"
/ {
model = "Buffalo Linkstation LS-XHL";
diff --git a/arch/arm/boot/dts/kirkwood-lsxl.dtsi b/arch/arm/boot/dts/kirkwood-lsxl.dtsi
index 31b17f5..f7e247c 100644
--- a/arch/arm/boot/dts/kirkwood-lsxl.dtsi
+++ b/arch/arm/boot/dts/kirkwood-lsxl.dtsi
@@ -1,5 +1,5 @@
-/include/ "kirkwood.dtsi"
-/include/ "kirkwood-6281.dtsi"
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
/ {
chosen {
diff --git a/arch/arm/boot/dts/kirkwood-mplcec4.dts b/arch/arm/boot/dts/kirkwood-mplcec4.dts
index 6179333..21f1954 100644
--- a/arch/arm/boot/dts/kirkwood-mplcec4.dts
+++ b/arch/arm/boot/dts/kirkwood-mplcec4.dts
@@ -1,7 +1,7 @@
/dts-v1/;
-/include/ "kirkwood.dtsi"
-/include/ "kirkwood-6281.dtsi"
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
/ {
model = "MPL CEC4";
@@ -16,6 +16,17 @@
bootargs = "console=ttyS0,115200n8 earlyprintk";
};
+ mbus {
+ ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000>;
+ pcie-controller {
+ status = "okay";
+
+ pcie@1,0 {
+ status = "okay";
+ };
+ };
+ };
+
ocp@f1000000 {
pinctrl: pinctrl@10000 {
pmx_led_health: pmx-led-health {
@@ -134,14 +145,6 @@
cd-gpios = <&gpio1 15 1>;
/* No WP GPIO */
};
-
- pcie-controller {
- status = "okay";
-
- pcie@1,0 {
- status = "okay";
- };
- };
};
gpio-leds {
diff --git a/arch/arm/boot/dts/kirkwood-netgear_readynas_duo_v2.dts b/arch/arm/boot/dts/kirkwood-netgear_readynas_duo_v2.dts
index ad6ade7..cc40f19 100644
--- a/arch/arm/boot/dts/kirkwood-netgear_readynas_duo_v2.dts
+++ b/arch/arm/boot/dts/kirkwood-netgear_readynas_duo_v2.dts
@@ -1,7 +1,7 @@
/dts-v1/;
-/include/ "kirkwood.dtsi"
-/include/ "kirkwood-6282.dtsi"
+#include "kirkwood.dtsi"
+#include "kirkwood-6282.dtsi"
/ {
model = "NETGEAR ReadyNAS Duo v2";
@@ -16,6 +16,17 @@
bootargs = "console=ttyS0,115200n8 earlyprintk";
};
+ mbus {
+ ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000>;
+ pcie-controller {
+ status = "okay";
+
+ pcie@1,0 {
+ status = "okay";
+ };
+ };
+ };
+
ocp@f1000000 {
pinctrl: pinctrl@10000 {
pmx_button_power: pmx-button-power {
@@ -52,6 +63,17 @@
};
};
+ clocks {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ g762_clk: fixedclk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <8192>;
+ };
+ };
+
i2c@11000 {
status = "okay";
@@ -59,6 +81,15 @@
compatible = "ricoh,rs5c372a";
reg = <0x32>;
};
+
+ g762: g762@3e {
+ compatible = "gmt,g762";
+ reg = <0x3e>;
+ clocks = <&g762_clk>; /* input clock */
+ fan_gear_mode = <0>;
+ fan_startv = <1>;
+ pwm_polarity = <0>;
+ };
};
serial@12000 {
@@ -101,14 +132,6 @@
status = "okay";
nr-ports = <2>;
};
-
- pcie-controller {
- status = "okay";
-
- pcie@1,0 {
- status = "okay";
- };
- };
};
gpio-leds {
diff --git a/arch/arm/boot/dts/kirkwood-ns2-common.dtsi b/arch/arm/boot/dts/kirkwood-ns2-common.dtsi
index 2afac04..d0fb34d 100644
--- a/arch/arm/boot/dts/kirkwood-ns2-common.dtsi
+++ b/arch/arm/boot/dts/kirkwood-ns2-common.dtsi
@@ -1,5 +1,5 @@
-/include/ "kirkwood.dtsi"
-/include/ "kirkwood-6281.dtsi"
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
/ {
chosen {
diff --git a/arch/arm/boot/dts/kirkwood-ns2.dts b/arch/arm/boot/dts/kirkwood-ns2.dts
index b50e93d..0599f3c 100644
--- a/arch/arm/boot/dts/kirkwood-ns2.dts
+++ b/arch/arm/boot/dts/kirkwood-ns2.dts
@@ -1,6 +1,6 @@
/dts-v1/;
-/include/ "kirkwood-ns2-common.dtsi"
+#include "kirkwood-ns2-common.dtsi"
/ {
model = "LaCie Network Space v2";
diff --git a/arch/arm/boot/dts/kirkwood-ns2lite.dts b/arch/arm/boot/dts/kirkwood-ns2lite.dts
index af8259f..b0e1798 100644
--- a/arch/arm/boot/dts/kirkwood-ns2lite.dts
+++ b/arch/arm/boot/dts/kirkwood-ns2lite.dts
@@ -1,6 +1,6 @@
/dts-v1/;
-/include/ "kirkwood-ns2-common.dtsi"
+#include "kirkwood-ns2-common.dtsi"
/ {
model = "LaCie Network Space Lite v2";
diff --git a/arch/arm/boot/dts/kirkwood-ns2max.dts b/arch/arm/boot/dts/kirkwood-ns2max.dts
index 85f24d2..d4f6a58 100644
--- a/arch/arm/boot/dts/kirkwood-ns2max.dts
+++ b/arch/arm/boot/dts/kirkwood-ns2max.dts
@@ -1,6 +1,6 @@
/dts-v1/;
-/include/ "kirkwood-ns2-common.dtsi"
+#include "kirkwood-ns2-common.dtsi"
/ {
model = "LaCie Network Space Max v2";
diff --git a/arch/arm/boot/dts/kirkwood-ns2mini.dts b/arch/arm/boot/dts/kirkwood-ns2mini.dts
index 329e530..f30e05a 100644
--- a/arch/arm/boot/dts/kirkwood-ns2mini.dts
+++ b/arch/arm/boot/dts/kirkwood-ns2mini.dts
@@ -1,6 +1,6 @@
/dts-v1/;
-/include/ "kirkwood-ns2-common.dtsi"
+#include "kirkwood-ns2-common.dtsi"
/ {
/* This machine is embedded in the first LaCie CloudBox product. */
diff --git a/arch/arm/boot/dts/kirkwood-nsa310-common.dtsi b/arch/arm/boot/dts/kirkwood-nsa310-common.dtsi
new file mode 100644
index 0000000..06267a9
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-nsa310-common.dtsi
@@ -0,0 +1,107 @@
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
+
+/ {
+ model = "ZyXEL NSA310";
+
+ ocp@f1000000 {
+ pinctrl: pinctrl@10000 {
+
+ pmx_usb_power_off: pmx-usb-power-off {
+ marvell,pins = "mpp21";
+ marvell,function = "gpio";
+ };
+ pmx_pwr_off: pmx-pwr-off {
+ marvell,pins = "mpp48";
+ marvell,function = "gpio";
+ };
+
+ };
+
+ serial@12000 {
+ status = "ok";
+ };
+
+ sata@80000 {
+ status = "okay";
+ nr-ports = <2>;
+ };
+
+ nand@3000000 {
+ status = "okay";
+ chip-delay = <35>;
+
+ partition@0 {
+ label = "uboot";
+ reg = <0x0000000 0x0100000>;
+ read-only;
+ };
+ partition@100000 {
+ label = "uboot_env";
+ reg = <0x0100000 0x0080000>;
+ };
+ partition@180000 {
+ label = "key_store";
+ reg = <0x0180000 0x0080000>;
+ };
+ partition@200000 {
+ label = "info";
+ reg = <0x0200000 0x0080000>;
+ };
+ partition@280000 {
+ label = "etc";
+ reg = <0x0280000 0x0a00000>;
+ };
+ partition@c80000 {
+ label = "kernel_1";
+ reg = <0x0c80000 0x0a00000>;
+ };
+ partition@1680000 {
+ label = "rootfs1";
+ reg = <0x1680000 0x2fc0000>;
+ };
+ partition@4640000 {
+ label = "kernel_2";
+ reg = <0x4640000 0x0a00000>;
+ };
+ partition@5040000 {
+ label = "rootfs2";
+ reg = <0x5040000 0x2fc0000>;
+ };
+ };
+
+ pcie-controller {
+ status = "okay";
+
+ pcie@1,0 {
+ status = "okay";
+ };
+ };
+ };
+
+ gpio_poweroff {
+ compatible = "gpio-poweroff";
+ pinctrl-0 = <&pmx_pwr_off>;
+ pinctrl-names = "default";
+ gpios = <&gpio1 16 0>;
+ };
+
+ regulators {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-0 = <&pmx_usb_power_off>;
+ pinctrl-names = "default";
+
+ usb0_power_off: regulator@1 {
+ compatible = "regulator-fixed";
+ reg = <1>;
+ regulator-name = "USB Power Off";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ regulator-boot-on;
+ gpio = <&gpio0 21 0>;
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/kirkwood-nsa310.dts b/arch/arm/boot/dts/kirkwood-nsa310.dts
index 6900359..7aeae0c 100644
--- a/arch/arm/boot/dts/kirkwood-nsa310.dts
+++ b/arch/arm/boot/dts/kirkwood-nsa310.dts
@@ -1,10 +1,8 @@
/dts-v1/;
-/include/ "kirkwood.dtsi"
-/include/ "kirkwood-6281.dtsi"
+#include "kirkwood-nsa310-common.dtsi"
/ {
- model = "ZyXEL NSA310";
compatible = "zyxel,nsa310", "marvell,kirkwood-88f6281", "marvell,kirkwood";
memory {
@@ -16,6 +14,17 @@
bootargs = "console=ttyS0,115200";
};
+ mbus {
+ ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000>;
+ pcie-controller {
+ status = "okay";
+
+ pcie@1,0 {
+ status = "okay";
+ };
+ };
+ };
+
ocp@f1000000 {
pinctrl: pinctrl@10000 {
pinctrl-0 = <&pmx_unknown>;
@@ -41,11 +50,6 @@
marvell,function = "gpio";
};
- pmx_usb_power_off: pmx-usb-power-off {
- marvell,pins = "mpp21";
- marvell,function = "gpio";
- };
-
pmx_led_sys_green: pmx-led-sys-green {
marvell,pins = "mpp28";
marvell,function = "gpio";
@@ -95,20 +99,6 @@
marvell,pins = "mpp46";
marvell,function = "gpio";
};
-
- pmx_pwr_off: pmx-pwr-off {
- marvell,pins = "mpp48";
- marvell,function = "gpio";
- };
- };
-
- serial@12000 {
- status = "ok";
- };
-
- sata@80000 {
- status = "okay";
- nr-ports = <2>;
};
i2c@11000 {
@@ -119,57 +109,6 @@
reg = <0x2e>;
};
};
-
- nand@3000000 {
- status = "okay";
- chip-delay = <35>;
-
- partition@0 {
- label = "uboot";
- reg = <0x0000000 0x0100000>;
- read-only;
- };
- partition@100000 {
- label = "uboot_env";
- reg = <0x0100000 0x0080000>;
- };
- partition@180000 {
- label = "key_store";
- reg = <0x0180000 0x0080000>;
- };
- partition@200000 {
- label = "info";
- reg = <0x0200000 0x0080000>;
- };
- partition@280000 {
- label = "etc";
- reg = <0x0280000 0x0a00000>;
- };
- partition@c80000 {
- label = "kernel_1";
- reg = <0x0c80000 0x0a00000>;
- };
- partition@1680000 {
- label = "rootfs1";
- reg = <0x1680000 0x2fc0000>;
- };
- partition@4640000 {
- label = "kernel_2";
- reg = <0x4640000 0x0a00000>;
- };
- partition@5040000 {
- label = "rootfs2";
- reg = <0x5040000 0x2fc0000>;
- };
- };
-
- pcie-controller {
- status = "okay";
-
- pcie@1,0 {
- status = "okay";
- };
- };
};
gpio_keys {
@@ -246,30 +185,4 @@
gpios = <&gpio1 8 0>;
};
};
-
- gpio_poweroff {
- compatible = "gpio-poweroff";
- pinctrl-0 = <&pmx_pwr_off>;
- pinctrl-names = "default";
- gpios = <&gpio1 16 0>;
- };
-
- regulators {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <0>;
- pinctrl-0 = <&pmx_usb_power_off>;
- pinctrl-names = "default";
-
- usb0_power_off: regulator@1 {
- compatible = "regulator-fixed";
- reg = <1>;
- regulator-name = "USB Power Off";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- regulator-always-on;
- regulator-boot-on;
- gpio = <&gpio0 21 0>;
- };
- };
};
diff --git a/arch/arm/boot/dts/kirkwood-nsa310a.dts b/arch/arm/boot/dts/kirkwood-nsa310a.dts
new file mode 100644
index 0000000..ab0212b
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-nsa310a.dts
@@ -0,0 +1,165 @@
+/dts-v1/;
+
+#include "kirkwood-nsa310-common.dtsi"
+
+/*
+ * There are at least two different NSA310 designs. This variant does
+ * not have the red USB Led.
+ */
+
+/ {
+ compatible = "zyxel,nsa310a", "zyxel,nsa310", "marvell,kirkwood-88f6281", "marvell,kirkwood";
+
+ memory {
+ device_type = "memory";
+ reg = <0x00000000 0x10000000>;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,115200";
+ };
+
+ ocp@f1000000 {
+ pinctrl: pinctrl@10000 {
+ pinctrl-names = "default";
+
+ pmx_led_esata_green: pmx-led-esata-green {
+ marvell,pins = "mpp12";
+ marvell,function = "gpio";
+ };
+
+ pmx_led_esata_red: pmx-led-esata-red {
+ marvell,pins = "mpp13";
+ marvell,function = "gpio";
+ };
+
+ pmx_led_usb_green: pmx-led-usb-green {
+ marvell,pins = "mpp15";
+ marvell,function = "gpio";
+ };
+
+ pmx_usb_power_off: pmx-usb-power-off {
+ marvell,pins = "mpp21";
+ marvell,function = "gpio";
+ };
+
+ pmx_led_sys_green: pmx-led-sys-green {
+ marvell,pins = "mpp28";
+ marvell,function = "gpio";
+ };
+
+ pmx_led_sys_red: pmx-led-sys-red {
+ marvell,pins = "mpp29";
+ marvell,function = "gpio";
+ };
+
+ pmx_btn_reset: pmx-btn-reset {
+ marvell,pins = "mpp36";
+ marvell,function = "gpio";
+ };
+
+ pmx_btn_copy: pmx-btn-copy {
+ marvell,pins = "mpp37";
+ marvell,function = "gpio";
+ };
+
+ pmx_led_copy_green: pmx-led-copy-green {
+ marvell,pins = "mpp39";
+ marvell,function = "gpio";
+ };
+
+ pmx_led_copy_red: pmx-led-copy-red {
+ marvell,pins = "mpp40";
+ marvell,function = "gpio";
+ };
+
+ pmx_led_hdd_green: pmx-led-hdd-green {
+ marvell,pins = "mpp41";
+ marvell,function = "gpio";
+ };
+
+ pmx_led_hdd_red: pmx-led-hdd-red {
+ marvell,pins = "mpp42";
+ marvell,function = "gpio";
+ };
+
+ pmx_btn_power: pmx-btn-power {
+ marvell,pins = "mpp46";
+ marvell,function = "gpio";
+ };
+
+ };
+
+ i2c@11000 {
+ status = "okay";
+
+ lm85: lm85@2e {
+ compatible = "lm85";
+ reg = <0x2e>;
+ };
+ };
+ };
+
+ gpio_keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ button@1 {
+ label = "Power Button";
+ linux,code = <116>;
+ gpios = <&gpio1 14 0>;
+ };
+ button@2 {
+ label = "Copy Button";
+ linux,code = <133>;
+ gpios = <&gpio1 5 1>;
+ };
+ button@3 {
+ label = "Reset Button";
+ linux,code = <0x198>;
+ gpios = <&gpio1 4 1>;
+ };
+ };
+
+ gpio-leds {
+ compatible = "gpio-leds";
+
+ green-sys {
+ label = "nsa310:green:sys";
+ gpios = <&gpio0 28 0>;
+ };
+ red-sys {
+ label = "nsa310:red:sys";
+ gpios = <&gpio0 29 0>;
+ };
+ green-hdd {
+ label = "nsa310:green:hdd";
+ gpios = <&gpio1 9 0>;
+ };
+ red-hdd {
+ label = "nsa310:red:hdd";
+ gpios = <&gpio1 10 0>;
+ };
+ green-esata {
+ label = "nsa310:green:esata";
+ gpios = <&gpio0 12 0>;
+ };
+ red-esata {
+ label = "nsa310:red:esata";
+ gpios = <&gpio0 13 0>;
+ };
+ green-usb {
+ label = "nsa310:green:usb";
+ gpios = <&gpio0 15 0>;
+ };
+ green-copy {
+ label = "nsa310:green:copy";
+ gpios = <&gpio1 7 0>;
+ };
+ red-copy {
+ label = "nsa310:red:copy";
+ gpios = <&gpio1 8 0>;
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/kirkwood-openblocks_a6.dts b/arch/arm/boot/dts/kirkwood-openblocks_a6.dts
index 38dc851..365b792 100644
--- a/arch/arm/boot/dts/kirkwood-openblocks_a6.dts
+++ b/arch/arm/boot/dts/kirkwood-openblocks_a6.dts
@@ -1,7 +1,7 @@
/dts-v1/;
-/include/ "kirkwood.dtsi"
-/include/ "kirkwood-6282.dtsi"
+#include "kirkwood.dtsi"
+#include "kirkwood-6282.dtsi"
/ {
model = "Plat'Home OpenBlocksA6";
diff --git a/arch/arm/boot/dts/kirkwood-sheevaplug-common.dtsi b/arch/arm/boot/dts/kirkwood-sheevaplug-common.dtsi
index f7143f1..0cc5f26 100644
--- a/arch/arm/boot/dts/kirkwood-sheevaplug-common.dtsi
+++ b/arch/arm/boot/dts/kirkwood-sheevaplug-common.dtsi
@@ -6,8 +6,8 @@
* Licensed under GPLv2
*/
-/include/ "kirkwood.dtsi"
-/include/ "kirkwood-6281.dtsi"
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
/ {
memory {
diff --git a/arch/arm/boot/dts/kirkwood-sheevaplug-esata.dts b/arch/arm/boot/dts/kirkwood-sheevaplug-esata.dts
index f620ce4..eac6a21 100644
--- a/arch/arm/boot/dts/kirkwood-sheevaplug-esata.dts
+++ b/arch/arm/boot/dts/kirkwood-sheevaplug-esata.dts
@@ -8,7 +8,7 @@
/dts-v1/;
-/include/ "kirkwood-sheevaplug-common.dtsi"
+#include "kirkwood-sheevaplug-common.dtsi"
/ {
model = "Globalscale Technologies eSATA SheevaPlug";
diff --git a/arch/arm/boot/dts/kirkwood-sheevaplug.dts b/arch/arm/boot/dts/kirkwood-sheevaplug.dts
index bf1dff2..bb61918 100644
--- a/arch/arm/boot/dts/kirkwood-sheevaplug.dts
+++ b/arch/arm/boot/dts/kirkwood-sheevaplug.dts
@@ -8,7 +8,7 @@
/dts-v1/;
-/include/ "kirkwood-sheevaplug-common.dtsi"
+#include "kirkwood-sheevaplug-common.dtsi"
/ {
model = "Globalscale Technologies SheevaPlug";
diff --git a/arch/arm/boot/dts/kirkwood-topkick.dts b/arch/arm/boot/dts/kirkwood-topkick.dts
index f2052d7..974f1e0 100644
--- a/arch/arm/boot/dts/kirkwood-topkick.dts
+++ b/arch/arm/boot/dts/kirkwood-topkick.dts
@@ -1,7 +1,7 @@
/dts-v1/;
-/include/ "kirkwood.dtsi"
-/include/ "kirkwood-6282.dtsi"
+#include "kirkwood.dtsi"
+#include "kirkwood-6282.dtsi"
/ {
model = "Univeral Scientific Industrial Co. Topkick-1281P2";
diff --git a/arch/arm/boot/dts/kirkwood-ts219-6281.dts b/arch/arm/boot/dts/kirkwood-ts219-6281.dts
index 6dd1038..3867ae3 100644
--- a/arch/arm/boot/dts/kirkwood-ts219-6281.dts
+++ b/arch/arm/boot/dts/kirkwood-ts219-6281.dts
@@ -1,8 +1,8 @@
/dts-v1/;
-/include/ "kirkwood.dtsi"
-/include/ "kirkwood-6281.dtsi"
-/include/ "kirkwood-ts219.dtsi"
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
+#include "kirkwood-ts219.dtsi"
/ {
ocp@f1000000 {
diff --git a/arch/arm/boot/dts/kirkwood-ts219-6282.dts b/arch/arm/boot/dts/kirkwood-ts219-6282.dts
index 6fdc5ff..04f6fe1 100644
--- a/arch/arm/boot/dts/kirkwood-ts219-6282.dts
+++ b/arch/arm/boot/dts/kirkwood-ts219-6282.dts
@@ -1,10 +1,21 @@
/dts-v1/;
-/include/ "kirkwood.dtsi"
-/include/ "kirkwood-6282.dtsi"
-/include/ "kirkwood-ts219.dtsi"
+#include "kirkwood.dtsi"
+#include "kirkwood-6282.dtsi"
+#include "kirkwood-ts219.dtsi"
/ {
+ mbus {
+ ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000>;
+ pcie-controller {
+ status = "okay";
+
+ pcie@2,0 {
+ status = "okay";
+ };
+ };
+ };
+
ocp@f1000000 {
pinctrl: pinctrl@10000 {
@@ -30,14 +41,6 @@
marvell,function = "gpio";
};
};
- pcie-controller {
- status = "okay";
-
- pcie@2,0 {
- status = "okay";
- };
- };
-
};
gpio_keys {
diff --git a/arch/arm/boot/dts/kirkwood-ts219.dtsi b/arch/arm/boot/dts/kirkwood-ts219.dtsi
index 0c9a94c..7019cf6 100644
--- a/arch/arm/boot/dts/kirkwood-ts219.dtsi
+++ b/arch/arm/boot/dts/kirkwood-ts219.dtsi
@@ -11,6 +11,16 @@
bootargs = "console=ttyS0,115200n8";
};
+ mbus {
+ pcie-controller {
+ status = "okay";
+
+ pcie@1,0 {
+ status = "okay";
+ };
+ };
+ };
+
ocp@f1000000 {
i2c@11000 {
status = "okay";
@@ -87,12 +97,5 @@
status = "okay";
nr-ports = <2>;
};
- pcie-controller {
- status = "okay";
-
- pcie@1,0 {
- status = "okay";
- };
- };
};
};
diff --git a/arch/arm/boot/dts/kirkwood.dtsi b/arch/arm/boot/dts/kirkwood.dtsi
index 9809fc1..70f414d 100644
--- a/arch/arm/boot/dts/kirkwood.dtsi
+++ b/arch/arm/boot/dts/kirkwood.dtsi
@@ -1,5 +1,7 @@
/include/ "skeleton.dtsi"
+#define MBUS_ID(target,attributes) (((target) << 24) | ((attributes) << 16))
+
/ {
compatible = "marvell,kirkwood";
interrupt-parent = <&intc>;
@@ -28,15 +30,28 @@
<0xf1020214 0x04>;
};
+ mbus {
+ compatible = "marvell,kirkwood-mbus", "simple-bus";
+ #address-cells = <2>;
+ #size-cells = <1>;
+ controller = <&mbusc>;
+ pcie-mem-aperture = <0xe0000000 0x10000000>; /* 256 MiB memory space */
+ pcie-io-aperture = <0xf2000000 0x100000>; /* 1 MiB I/O space */
+ };
+
ocp@f1000000 {
compatible = "simple-bus";
ranges = <0x00000000 0xf1000000 0x0100000
- 0xe0000000 0xe0000000 0x8100000 /* PCIE */
0xf4000000 0xf4000000 0x0000400
0xf5000000 0xf5000000 0x0000400>;
#address-cells = <1>;
#size-cells = <1>;
+ mbusc: mbus-controller@20000 {
+ compatible = "marvell,mbus-controller";
+ reg = <0x20000 0x80>, <0x1500 0x20>;
+ };
+
core_clk: core-clocks@10030 {
compatible = "marvell,kirkwood-core-clock";
reg = <0x10030 0x4>;
diff --git a/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts b/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts
index d2803be..759b0cd 100644
--- a/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts
+++ b/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts
@@ -125,6 +125,12 @@
clock-names = "apb_pclk";
};
+ scc@7fff0000 {
+ compatible = "arm,vexpress-scc,v2p-ca15_a7", "arm,vexpress-scc";
+ reg = <0 0x7fff0000 0 0x1000>;
+ interrupts = <0 95 4>;
+ };
+
timer {
compatible = "arm,armv7-timer";
interrupts = <1 13 0xf08>,
diff --git a/arch/arm/boot/dts/vf610-twr.dts b/arch/arm/boot/dts/vf610-twr.dts
index b3905f5..1a58678 100644
--- a/arch/arm/boot/dts/vf610-twr.dts
+++ b/arch/arm/boot/dts/vf610-twr.dts
@@ -50,6 +50,13 @@
status = "okay";
};
+&i2c0 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c0_1>;
+ status = "okay";
+};
+
&uart1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart1_1>;
diff --git a/arch/arm/configs/imx_v4_v5_defconfig b/arch/arm/configs/imx_v4_v5_defconfig
index f07a847..e958ebe 100644
--- a/arch/arm/configs/imx_v4_v5_defconfig
+++ b/arch/arm/configs/imx_v4_v5_defconfig
@@ -1,4 +1,3 @@
-CONFIG_EXPERIMENTAL=y
# CONFIG_SWAP is not set
CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y
@@ -17,16 +16,18 @@
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_IOSCHED_DEADLINE is not set
# CONFIG_IOSCHED_CFQ is not set
-CONFIG_ARCH_MXC=y
CONFIG_ARCH_MULTI_V4T=y
CONFIG_ARCH_MULTI_V5=y
# CONFIG_ARCH_MULTI_V7 is not set
+CONFIG_ARCH_MXC=y
+CONFIG_MXC_IRQ_PRIOR=y
CONFIG_ARCH_MX1ADS=y
CONFIG_MACH_SCB9328=y
CONFIG_MACH_APF9328=y
CONFIG_MACH_MX21ADS=y
CONFIG_MACH_MX25_3DS=y
CONFIG_MACH_EUKREA_CPUIMX25SD=y
+CONFIG_MACH_IMX25_DT=y
CONFIG_MACH_MX27ADS=y
CONFIG_MACH_PCM038=y
CONFIG_MACH_CPUIMX27=y
@@ -39,8 +40,6 @@
CONFIG_MACH_MXT_TD60=y
CONFIG_MACH_IMX27IPCAM=y
CONFIG_MACH_IMX27_DT=y
-CONFIG_MXC_IRQ_PRIOR=y
-CONFIG_MXC_PWM=y
CONFIG_PREEMPT=y
CONFIG_AEABI=y
CONFIG_ZBOOT_ROM_TEXT=0x0
@@ -67,7 +66,6 @@
CONFIG_DEVTMPFS_MOUNT=y
CONFIG_MTD=y
CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_CHAR=y
CONFIG_MTD_BLOCK=y
CONFIG_MTD_CFI=y
CONFIG_MTD_CFI_ADV_OPTIONS=y
@@ -123,24 +121,20 @@
CONFIG_REGULATOR_MC13783=y
CONFIG_REGULATOR_MC13892=y
CONFIG_MEDIA_SUPPORT=y
-CONFIG_VIDEO_DEV=y
-CONFIG_V4L_PLATFORM_DRIVERS=y
CONFIG_MEDIA_CAMERA_SUPPORT=y
+CONFIG_V4L_PLATFORM_DRIVERS=y
CONFIG_SOC_CAMERA=y
-CONFIG_SOC_CAMERA_OV2640=y
CONFIG_VIDEO_MX2=y
CONFIG_V4L_MEM2MEM_DRIVERS=y
CONFIG_VIDEO_CODA=y
+CONFIG_SOC_CAMERA_OV2640=y
CONFIG_FB=y
CONFIG_FB_IMX=y
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_LCD_CLASS_DEVICE=y
CONFIG_LCD_L4F00242T03=y
CONFIG_BACKLIGHT_CLASS_DEVICE=y
-CONFIG_BACKLIGHT_PWM=y
CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_FONTS=y
-CONFIG_FONT_8x8=y
CONFIG_LOGO=y
CONFIG_SOUND=y
CONFIG_SND=y
@@ -157,7 +151,6 @@
CONFIG_USB=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_MXC=y
-CONFIG_USB_ULPI=y
CONFIG_MMC=y
CONFIG_MMC_SDHCI=y
CONFIG_MMC_SDHCI_PLTFM=y
@@ -198,3 +191,5 @@
CONFIG_NLS_ISO8859_1=y
CONFIG_NLS_ISO8859_15=m
# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_FONTS=y
+CONFIG_FONT_8x8=y
diff --git a/arch/arm/configs/imx_v6_v7_defconfig b/arch/arm/configs/imx_v6_v7_defconfig
index 06686e7..5d488c2 100644
--- a/arch/arm/configs/imx_v6_v7_defconfig
+++ b/arch/arm/configs/imx_v6_v7_defconfig
@@ -1,4 +1,3 @@
-CONFIG_EXPERIMENTAL=y
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_KERNEL_LZO=y
CONFIG_SYSVIPC=y
@@ -17,10 +16,8 @@
CONFIG_MODVERSIONS=y
CONFIG_MODULE_SRCVERSION_ALL=y
# CONFIG_BLK_DEV_BSG is not set
-CONFIG_ARCH_MXC=y
CONFIG_ARCH_MULTI_V6=y
-CONFIG_ARCH_MULTI_V7=y
-CONFIG_MACH_IMX31_DT=y
+CONFIG_ARCH_MXC=y
CONFIG_MACH_MX31LILLY=y
CONFIG_MACH_MX31LITE=y
CONFIG_MACH_PCM037=y
@@ -30,6 +27,7 @@
CONFIG_MACH_QONG=y
CONFIG_MACH_ARMADILLO5X0=y
CONFIG_MACH_KZM_ARM11_01=y
+CONFIG_MACH_IMX31_DT=y
CONFIG_MACH_PCM043=y
CONFIG_MACH_MX35_3DS=y
CONFIG_MACH_VPR200=y
@@ -39,7 +37,6 @@
CONFIG_SOC_IMX6Q=y
CONFIG_SOC_IMX6SL=y
CONFIG_SOC_VF610=y
-CONFIG_MXC_PWM=y
CONFIG_SMP=y
CONFIG_VMSPLIT_2G=y
CONFIG_PREEMPT_VOLUNTARY=y
@@ -64,20 +61,24 @@
# CONFIG_INET_LRO is not set
CONFIG_IPV6=y
CONFIG_NETFILTER=y
-# CONFIG_WIRELESS is not set
+CONFIG_CFG80211=y
+CONFIG_MAC80211=y
+CONFIG_RFKILL=y
+CONFIG_RFKILL_INPUT=y
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
# CONFIG_STANDALONE is not set
+CONFIG_IMX_WEIM=y
CONFIG_CONNECTOR=y
CONFIG_MTD=y
CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_CHAR=y
CONFIG_MTD_BLOCK=y
CONFIG_MTD_CFI=y
CONFIG_MTD_JEDECPROBE=y
CONFIG_MTD_CFI_INTELEXT=y
CONFIG_MTD_CFI_AMDSTD=y
CONFIG_MTD_CFI_STAA=y
+CONFIG_MTD_PHYSMAP_OF=y
CONFIG_MTD_DATAFLASH=y
CONFIG_MTD_M25P80=y
CONFIG_MTD_SST25L=y
@@ -88,6 +89,7 @@
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_SIZE=65536
+CONFIG_SRAM=y
CONFIG_EEPROM_AT24=y
CONFIG_EEPROM_AT25=y
# CONFIG_SCSI_PROC_FS is not set
@@ -98,10 +100,11 @@
CONFIG_SCSI_SCAN_ASYNC=y
# CONFIG_SCSI_LOWLEVEL is not set
CONFIG_ATA=y
+CONFIG_SATA_AHCI_PLATFORM=y
+CONFIG_AHCI_IMX=y
CONFIG_PATA_IMX=y
CONFIG_NETDEVICES=y
# CONFIG_NET_VENDOR_BROADCOM is not set
-# CONFIG_NET_VENDOR_CHELSIO is not set
CONFIG_CS89x0=y
CONFIG_CS89x0_PLATFORM=y
# CONFIG_NET_VENDOR_FARADAY is not set
@@ -115,7 +118,7 @@
CONFIG_SMC911X=y
CONFIG_SMSC911X=y
# CONFIG_NET_VENDOR_STMICRO is not set
-# CONFIG_WLAN is not set
+CONFIG_BRCMFMAC=m
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
CONFIG_INPUT_EVDEV=y
CONFIG_INPUT_EVBUG=m
@@ -124,6 +127,7 @@
CONFIG_MOUSE_PS2=m
CONFIG_MOUSE_PS2_ELANTECH=y
CONFIG_INPUT_TOUCHSCREEN=y
+CONFIG_TOUCHSCREEN_EGALAX=y
CONFIG_TOUCHSCREEN_MC13783=y
CONFIG_INPUT_MISC=y
CONFIG_INPUT_MMA8450=y
@@ -133,13 +137,13 @@
# CONFIG_DEVKMEM is not set
CONFIG_SERIAL_IMX=y
CONFIG_SERIAL_IMX_CONSOLE=y
+CONFIG_SERIAL_FSL_LPUART=y
+CONFIG_SERIAL_FSL_LPUART_CONSOLE=y
CONFIG_HW_RANDOM=y
CONFIG_HW_RANDOM_MXC_RNGA=y
-CONFIG_I2C=y
# CONFIG_I2C_COMPAT is not set
CONFIG_I2C_CHARDEV=y
# CONFIG_I2C_HELPER_AUTO is not set
-CONFIG_I2C_ALGOBIT=m
CONFIG_I2C_ALGOPCF=m
CONFIG_I2C_ALGOPCA=m
CONFIG_I2C_IMX=y
@@ -155,30 +159,26 @@
CONFIG_MFD_MC13XXX_I2C=y
CONFIG_REGULATOR=y
CONFIG_REGULATOR_FIXED_VOLTAGE=y
-CONFIG_REGULATOR_DA9052=y
CONFIG_REGULATOR_ANATOP=y
+CONFIG_REGULATOR_DA9052=y
CONFIG_REGULATOR_MC13783=y
CONFIG_REGULATOR_MC13892=y
CONFIG_MEDIA_SUPPORT=y
-CONFIG_VIDEO_DEV=y
-CONFIG_V4L_PLATFORM_DRIVERS=y
CONFIG_MEDIA_CAMERA_SUPPORT=y
+CONFIG_V4L_PLATFORM_DRIVERS=y
CONFIG_SOC_CAMERA=y
+CONFIG_VIDEO_MX3=y
+CONFIG_V4L_MEM2MEM_DRIVERS=y
+CONFIG_VIDEO_CODA=y
CONFIG_SOC_CAMERA_OV2640=y
CONFIG_DRM=y
-CONFIG_VIDEO_MX3=y
-CONFIG_FB=y
-CONFIG_LCD_PLATFORM=y
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_LCD_CLASS_DEVICE=y
CONFIG_LCD_L4F00242T03=y
+CONFIG_LCD_PLATFORM=y
CONFIG_BACKLIGHT_CLASS_DEVICE=y
CONFIG_BACKLIGHT_PWM=y
CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
-CONFIG_FONTS=y
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
CONFIG_LOGO=y
CONFIG_SOUND=y
CONFIG_SND=y
@@ -192,11 +192,12 @@
CONFIG_USB=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_MXC=y
+CONFIG_USB_STORAGE=y
CONFIG_USB_CHIPIDEA=y
CONFIG_USB_CHIPIDEA_HOST=y
CONFIG_USB_PHY=y
+CONFIG_NOP_USB_XCEIV=y
CONFIG_USB_MXS_PHY=y
-CONFIG_USB_STORAGE=y
CONFIG_MMC=y
CONFIG_MMC_SDHCI=y
CONFIG_MMC_SDHCI_PLTFM=y
@@ -213,9 +214,10 @@
CONFIG_MXS_DMA=y
CONFIG_STAGING=y
CONFIG_DRM_IMX=y
-CONFIG_DRM_IMX_TVE=y
CONFIG_DRM_IMX_FB_HELPER=y
CONFIG_DRM_IMX_PARALLEL_DISPLAY=y
+CONFIG_DRM_IMX_TVE=y
+CONFIG_DRM_IMX_LDB=y
CONFIG_DRM_IMX_IPUV3_CORE=y
CONFIG_DRM_IMX_IPUV3=y
CONFIG_COMMON_CLK_DEBUG=y
@@ -269,3 +271,6 @@
CONFIG_CRC_T10DIF=y
CONFIG_CRC7=m
CONFIG_LIBCRC32C=m
+CONFIG_FONTS=y
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
diff --git a/arch/arm/configs/mxs_defconfig b/arch/arm/configs/mxs_defconfig
index 1d6d8fb..4555c02 100644
--- a/arch/arm/configs/mxs_defconfig
+++ b/arch/arm/configs/mxs_defconfig
@@ -1,4 +1,3 @@
-CONFIG_EXPERIMENTAL=y
CONFIG_SYSVIPC=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
@@ -27,7 +26,6 @@
# CONFIG_ARM_THUMB is not set
CONFIG_PREEMPT_VOLUNTARY=y
CONFIG_AEABI=y
-CONFIG_AUTO_ZRELADDR=y
CONFIG_FPE_NWFPE=y
CONFIG_NET=y
CONFIG_PACKET=y
@@ -43,8 +41,6 @@
# CONFIG_INET_DIAG is not set
# CONFIG_IPV6 is not set
CONFIG_CAN=m
-CONFIG_CAN_RAW=m
-CONFIG_CAN_BCM=m
CONFIG_CAN_FLEXCAN=m
# CONFIG_WIRELESS is not set
CONFIG_DEVTMPFS=y
@@ -52,7 +48,6 @@
# CONFIG_FIRMWARE_IN_KERNEL is not set
CONFIG_MTD=y
CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_CHAR=y
CONFIG_MTD_BLOCK=y
CONFIG_MTD_DATAFLASH=y
CONFIG_MTD_M25P80=y
@@ -67,12 +62,12 @@
CONFIG_BLK_DEV_SD=y
CONFIG_NETDEVICES=y
CONFIG_ENC28J60=y
-CONFIG_USB_USBNET=y
-CONFIG_USB_NET_SMSC95XX=y
CONFIG_SMSC_PHY=y
CONFIG_ICPLUS_PHY=y
CONFIG_REALTEK_PHY=y
CONFIG_MICREL_PHY=y
+CONFIG_USB_USBNET=y
+CONFIG_USB_NET_SMSC95XX=y
# CONFIG_WLAN is not set
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
CONFIG_INPUT_EVDEV=y
@@ -110,7 +105,6 @@
CONFIG_BACKLIGHT_CLASS_DEVICE=y
CONFIG_BACKLIGHT_PWM=y
CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_FONTS=y
CONFIG_LOGO=y
CONFIG_SOUND=y
CONFIG_SND=y
@@ -119,9 +113,9 @@
CONFIG_SND_SOC_MXS_SGTL5000=y
CONFIG_USB=y
CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_STORAGE=y
CONFIG_USB_CHIPIDEA=y
CONFIG_USB_CHIPIDEA_HOST=y
-CONFIG_USB_STORAGE=y
CONFIG_USB_PHY=y
CONFIG_USB_MXS_PHY=y
CONFIG_MMC=y
@@ -143,9 +137,9 @@
CONFIG_MXS_DMA=y
CONFIG_STAGING=y
CONFIG_MXS_LRADC=y
-CONFIG_IIO_SYSFS_TRIGGER=y
CONFIG_COMMON_CLK_DEBUG=y
CONFIG_IIO=y
+CONFIG_IIO_SYSFS_TRIGGER=y
CONFIG_PWM=y
CONFIG_PWM_MXS=y
CONFIG_EXT2_FS=y
@@ -173,14 +167,14 @@
CONFIG_NLS_ISO8859_1=y
CONFIG_NLS_ISO8859_15=y
CONFIG_PRINTK_TIME=y
+CONFIG_DEBUG_INFO=y
CONFIG_FRAME_WARN=2048
-CONFIG_MAGIC_SYSRQ=y
CONFIG_UNUSED_SYMBOLS=y
+CONFIG_MAGIC_SYSRQ=y
CONFIG_DEBUG_KERNEL=y
CONFIG_LOCKUP_DETECTOR=y
CONFIG_TIMER_STATS=y
CONFIG_PROVE_LOCKING=y
-CONFIG_DEBUG_INFO=y
CONFIG_BLK_DEV_IO_TRACE=y
CONFIG_STRICT_DEVMEM=y
CONFIG_DEBUG_USER=y
@@ -188,3 +182,4 @@
# CONFIG_CRYPTO_HW is not set
CONFIG_CRC_ITU_T=m
CONFIG_CRC7=m
+CONFIG_FONTS=y
diff --git a/arch/arm/configs/omap2plus_defconfig b/arch/arm/configs/omap2plus_defconfig
index 056b27a..254cf05 100644
--- a/arch/arm/configs/omap2plus_defconfig
+++ b/arch/arm/configs/omap2plus_defconfig
@@ -305,3 +305,4 @@
CONFIG_TI_DAVINCI_CPDMA=y
CONFIG_TI_CPSW=y
CONFIG_AT803X_PHY=y
+CONFIG_SOC_DRA7XX=y
diff --git a/arch/arm/include/asm/mach/pci.h b/arch/arm/include/asm/mach/pci.h
index a1c90d7..454d642 100644
--- a/arch/arm/include/asm/mach/pci.h
+++ b/arch/arm/include/asm/mach/pci.h
@@ -36,6 +36,8 @@
resource_size_t start,
resource_size_t size,
resource_size_t align);
+ void (*add_bus)(struct pci_bus *bus);
+ void (*remove_bus)(struct pci_bus *bus);
};
/*
@@ -63,6 +65,8 @@
resource_size_t start,
resource_size_t size,
resource_size_t align);
+ void (*add_bus)(struct pci_bus *bus);
+ void (*remove_bus)(struct pci_bus *bus);
void *private_data; /* platform controller private data */
};
diff --git a/arch/arm/kernel/bios32.c b/arch/arm/kernel/bios32.c
index 88e14d7..317da88 100644
--- a/arch/arm/kernel/bios32.c
+++ b/arch/arm/kernel/bios32.c
@@ -363,6 +363,20 @@
}
EXPORT_SYMBOL(pcibios_fixup_bus);
+void pcibios_add_bus(struct pci_bus *bus)
+{
+ struct pci_sys_data *sys = bus->sysdata;
+ if (sys->add_bus)
+ sys->add_bus(bus);
+}
+
+void pcibios_remove_bus(struct pci_bus *bus)
+{
+ struct pci_sys_data *sys = bus->sysdata;
+ if (sys->remove_bus)
+ sys->remove_bus(bus);
+}
+
/*
* Swizzle the device pin each time we cross a bridge. If a platform does
* not provide a swizzle function, we perform the standard PCI swizzling.
@@ -464,6 +478,8 @@
sys->swizzle = hw->swizzle;
sys->map_irq = hw->map_irq;
sys->align_resource = hw->align_resource;
+ sys->add_bus = hw->add_bus;
+ sys->remove_bus = hw->remove_bus;
INIT_LIST_HEAD(&sys->resources);
if (hw->private_data)
diff --git a/arch/arm/mach-at91/board-dt-sama5.c b/arch/arm/mach-at91/board-dt-sama5.c
index ad95f6a..bf00d15 100644
--- a/arch/arm/mach-at91/board-dt-sama5.c
+++ b/arch/arm/mach-at91/board-dt-sama5.c
@@ -42,20 +42,15 @@
{
int value;
-#define GMII_RCCPSR 260
-#define GMII_RRDPSR 261
-#define GMII_ERCR 11
-#define GMII_ERDWR 12
-
/* Set delay values */
- value = GMII_RCCPSR | 0x8000;
- phy_write(phy, GMII_ERCR, value);
+ value = MICREL_KSZ9021_RGMII_CLK_CTRL_PAD_SCEW | 0x8000;
+ phy_write(phy, MICREL_KSZ9021_EXTREG_CTRL, value);
value = 0xF2F4;
- phy_write(phy, GMII_ERDWR, value);
- value = GMII_RRDPSR | 0x8000;
- phy_write(phy, GMII_ERCR, value);
+ phy_write(phy, MICREL_KSZ9021_EXTREG_DATA_WRITE, value);
+ value = MICREL_KSZ9021_RGMII_RX_DATA_PAD_SCEW | 0x8000;
+ phy_write(phy, MICREL_KSZ9021_EXTREG_CTRL, value);
value = 0x2222;
- phy_write(phy, GMII_ERDWR, value);
+ phy_write(phy, MICREL_KSZ9021_EXTREG_DATA_WRITE, value);
return 0;
}
diff --git a/arch/arm/mach-davinci/board-da830-evm.c b/arch/arm/mach-davinci/board-da830-evm.c
index 1332de8..c4bdc0a 100644
--- a/arch/arm/mach-davinci/board-da830-evm.c
+++ b/arch/arm/mach-davinci/board-da830-evm.c
@@ -185,10 +185,6 @@
__func__, ret);
}
-static struct davinci_uart_config da830_evm_uart_config __initdata = {
- .enabled_uarts = 0x7,
-};
-
static const short da830_evm_mcasp1_pins[] = {
DA830_AHCLKX1, DA830_ACLKX1, DA830_AFSX1, DA830_AHCLKR1, DA830_AFSR1,
DA830_AMUTE1, DA830_AXR1_0, DA830_AXR1_1, DA830_AXR1_2, DA830_AXR1_5,
@@ -630,7 +626,7 @@
pr_warning("da830_evm_init: watchdog registration failed: %d\n",
ret);
- davinci_serial_init(&da830_evm_uart_config);
+ davinci_serial_init(da8xx_serial_device);
i2c_register_board_info(1, da830_evm_i2c_devices,
ARRAY_SIZE(da830_evm_i2c_devices));
diff --git a/arch/arm/mach-davinci/board-da850-evm.c b/arch/arm/mach-davinci/board-da850-evm.c
index f5c2281..dd1fb24 100644
--- a/arch/arm/mach-davinci/board-da850-evm.c
+++ b/arch/arm/mach-davinci/board-da850-evm.c
@@ -746,10 +746,6 @@
.bus_delay = 0, /* usec */
};
-static struct davinci_uart_config da850_evm_uart_config __initdata = {
- .enabled_uarts = 0x7,
-};
-
/* davinci da850 evm audio machine driver */
static u8 da850_iis_serializer_direction[] = {
INACTIVE_MODE, INACTIVE_MODE, INACTIVE_MODE, INACTIVE_MODE,
@@ -1492,7 +1488,7 @@
__func__, ret);
}
- davinci_serial_init(&da850_evm_uart_config);
+ davinci_serial_init(da8xx_serial_device);
i2c_register_board_info(1, da850_evm_i2c_devices,
ARRAY_SIZE(da850_evm_i2c_devices));
diff --git a/arch/arm/mach-davinci/board-dm355-evm.c b/arch/arm/mach-davinci/board-dm355-evm.c
index c2a0a67..42b23a3 100644
--- a/arch/arm/mach-davinci/board-dm355-evm.c
+++ b/arch/arm/mach-davinci/board-dm355-evm.c
@@ -314,10 +314,6 @@
&davinci_nand_device,
};
-static struct davinci_uart_config uart_config __initdata = {
- .enabled_uarts = (1 << 0),
-};
-
static void __init dm355_evm_map_io(void)
{
dm355_init();
@@ -393,7 +389,7 @@
platform_add_devices(davinci_evm_devices,
ARRAY_SIZE(davinci_evm_devices));
evm_init_i2c();
- davinci_serial_init(&uart_config);
+ davinci_serial_init(dm355_serial_device);
/* NOTE: NAND flash timings set by the UBL are slower than
* needed by MT29F16G08FAA chips ... EMIF.A1CR is 0x40400204
diff --git a/arch/arm/mach-davinci/board-dm355-leopard.c b/arch/arm/mach-davinci/board-dm355-leopard.c
index 139e42d..65a984c 100644
--- a/arch/arm/mach-davinci/board-dm355-leopard.c
+++ b/arch/arm/mach-davinci/board-dm355-leopard.c
@@ -173,10 +173,6 @@
&davinci_nand_device,
};
-static struct davinci_uart_config uart_config __initdata = {
- .enabled_uarts = (1 << 0),
-};
-
static void __init dm355_leopard_map_io(void)
{
dm355_init();
@@ -252,7 +248,7 @@
platform_add_devices(davinci_leopard_devices,
ARRAY_SIZE(davinci_leopard_devices));
leopard_init_i2c();
- davinci_serial_init(&uart_config);
+ davinci_serial_init(dm355_serial_device);
/* NOTE: NAND flash timings set by the UBL are slower than
* needed by MT29F16G08FAA chips ... EMIF.A1CR is 0x40400204
diff --git a/arch/arm/mach-davinci/board-dm365-evm.c b/arch/arm/mach-davinci/board-dm365-evm.c
index 4cdb61c..92b7f77 100644
--- a/arch/arm/mach-davinci/board-dm365-evm.c
+++ b/arch/arm/mach-davinci/board-dm365-evm.c
@@ -718,10 +718,6 @@
/* REVISIT export switches: NTSC/PAL (SW5.6), EXTRA1 (SW5.2), etc */
}
-static struct davinci_uart_config uart_config __initdata = {
- .enabled_uarts = (1 << 0),
-};
-
static void __init dm365_evm_map_io(void)
{
dm365_init();
@@ -748,7 +744,7 @@
static __init void dm365_evm_init(void)
{
evm_init_i2c();
- davinci_serial_init(&uart_config);
+ davinci_serial_init(dm365_serial_device);
dm365evm_emac_configure();
dm365evm_mmc_configure();
diff --git a/arch/arm/mach-davinci/board-dm644x-evm.c b/arch/arm/mach-davinci/board-dm644x-evm.c
index fa4bfaf..40bb9b5 100644
--- a/arch/arm/mach-davinci/board-dm644x-evm.c
+++ b/arch/arm/mach-davinci/board-dm644x-evm.c
@@ -727,10 +727,6 @@
&rtc_dev,
};
-static struct davinci_uart_config uart_config __initdata = {
- .enabled_uarts = (1 << 0),
-};
-
static void __init
davinci_evm_map_io(void)
{
@@ -792,7 +788,7 @@
davinci_setup_mmc(0, &dm6446evm_mmc_config);
dm644x_init_video(&dm644xevm_capture_cfg, &dm644xevm_display_cfg);
- davinci_serial_init(&uart_config);
+ davinci_serial_init(dm644x_serial_device);
dm644x_init_asp(&dm644x_evm_snd_data);
/* irlml6401 switches over 1A, in under 8 msec */
diff --git a/arch/arm/mach-davinci/board-dm646x-evm.c b/arch/arm/mach-davinci/board-dm646x-evm.c
index 0c005e8..2bc3651 100644
--- a/arch/arm/mach-davinci/board-dm646x-evm.c
+++ b/arch/arm/mach-davinci/board-dm646x-evm.c
@@ -750,10 +750,6 @@
cdce_clk_init();
}
-static struct davinci_uart_config uart_config __initdata = {
- .enabled_uarts = (1 << 0),
-};
-
#define DM646X_EVM_PHY_ID "davinci_mdio-0:01"
/*
* The following EDMA channels/slots are not being used by drivers (for
@@ -793,7 +789,7 @@
struct davinci_soc_info *soc_info = &davinci_soc_info;
evm_init_i2c();
- davinci_serial_init(&uart_config);
+ davinci_serial_init(dm646x_serial_device);
dm646x_init_mcasp0(&dm646x_evm_snd_data[0]);
dm646x_init_mcasp1(&dm646x_evm_snd_data[1]);
diff --git a/arch/arm/mach-davinci/board-mityomapl138.c b/arch/arm/mach-davinci/board-mityomapl138.c
index 9549d53..cd0f587 100644
--- a/arch/arm/mach-davinci/board-mityomapl138.c
+++ b/arch/arm/mach-davinci/board-mityomapl138.c
@@ -434,10 +434,6 @@
ARRAY_SIZE(mityomapl138_devices));
}
-static struct davinci_uart_config mityomapl138_uart_config __initdata = {
- .enabled_uarts = 0x7,
-};
-
static const short mityomap_mii_pins[] = {
DA850_MII_TXEN, DA850_MII_TXCLK, DA850_MII_COL, DA850_MII_TXD_3,
DA850_MII_TXD_2, DA850_MII_TXD_1, DA850_MII_TXD_0, DA850_MII_RXER,
@@ -517,7 +513,7 @@
if (ret)
pr_warning("watchdog registration failed: %d\n", ret);
- davinci_serial_init(&mityomapl138_uart_config);
+ davinci_serial_init(da8xx_serial_device);
ret = da8xx_register_i2c(0, &mityomap_i2c_0_pdata);
if (ret)
diff --git a/arch/arm/mach-davinci/board-neuros-osd2.c b/arch/arm/mach-davinci/board-neuros-osd2.c
index 808233b..46f336f 100644
--- a/arch/arm/mach-davinci/board-neuros-osd2.c
+++ b/arch/arm/mach-davinci/board-neuros-osd2.c
@@ -154,10 +154,6 @@
&ntosd2_leds_dev,
};
-static struct davinci_uart_config uart_config __initdata = {
- .enabled_uarts = (1 << 0),
-};
-
static void __init davinci_ntosd2_map_io(void)
{
dm644x_init();
@@ -198,7 +194,7 @@
platform_add_devices(davinci_ntosd2_devices,
ARRAY_SIZE(davinci_ntosd2_devices));
- davinci_serial_init(&uart_config);
+ davinci_serial_init(dm644x_serial_device);
dm644x_init_asp(&dm644x_ntosd2_snd_data);
soc_info->emac_pdata->phy_id = NEUROS_OSD2_PHY_ID;
diff --git a/arch/arm/mach-davinci/board-omapl138-hawk.c b/arch/arm/mach-davinci/board-omapl138-hawk.c
index b8c20de..ab98c75 100644
--- a/arch/arm/mach-davinci/board-omapl138-hawk.c
+++ b/arch/arm/mach-davinci/board-omapl138-hawk.c
@@ -286,15 +286,11 @@
gpio_free(DA850_USB1_VBUS_PIN);
}
-static struct davinci_uart_config omapl138_hawk_uart_config __initdata = {
- .enabled_uarts = 0x7,
-};
-
static __init void omapl138_hawk_init(void)
{
int ret;
- davinci_serial_init(&omapl138_hawk_uart_config);
+ davinci_serial_init(da8xx_serial_device);
omapl138_hawk_config_emac();
diff --git a/arch/arm/mach-davinci/board-sffsdr.c b/arch/arm/mach-davinci/board-sffsdr.c
index 513eee1..d8436014 100644
--- a/arch/arm/mach-davinci/board-sffsdr.c
+++ b/arch/arm/mach-davinci/board-sffsdr.c
@@ -125,10 +125,6 @@
&davinci_sffsdr_nandflash_device,
};
-static struct davinci_uart_config uart_config __initdata = {
- .enabled_uarts = (1 << 0),
-};
-
static void __init davinci_sffsdr_map_io(void)
{
dm644x_init();
@@ -141,7 +137,7 @@
platform_add_devices(davinci_sffsdr_devices,
ARRAY_SIZE(davinci_sffsdr_devices));
sffsdr_init_i2c();
- davinci_serial_init(&uart_config);
+ davinci_serial_init(dm644x_serial_device);
soc_info->emac_pdata->phy_id = SFFSDR_PHY_ID;
davinci_setup_usb(0, 0); /* We support only peripheral mode. */
diff --git a/arch/arm/mach-davinci/da830.c b/arch/arm/mach-davinci/da830.c
index abbaf02..d6c746e 100644
--- a/arch/arm/mach-davinci/da830.c
+++ b/arch/arm/mach-davinci/da830.c
@@ -395,9 +395,9 @@
CLK(NULL, "tptc0", &tptc0_clk),
CLK(NULL, "tptc1", &tptc1_clk),
CLK("da830-mmc.0", NULL, &mmcsd_clk),
- CLK(NULL, "uart0", &uart0_clk),
- CLK(NULL, "uart1", &uart1_clk),
- CLK(NULL, "uart2", &uart2_clk),
+ CLK("serial8250.0", NULL, &uart0_clk),
+ CLK("serial8250.1", NULL, &uart1_clk),
+ CLK("serial8250.2", NULL, &uart2_clk),
CLK("spi_davinci.0", NULL, &spi0_clk),
CLK("spi_davinci.1", NULL, &spi1_clk),
CLK(NULL, "ecap0", &ecap0_clk),
@@ -417,6 +417,7 @@
CLK(NULL, "aintc", &aintc_clk),
CLK(NULL, "secu_mgr", &secu_mgr_clk),
CLK("davinci_emac.1", NULL, &emac_clk),
+ CLK("davinci_mdio.0", "fck", &emac_clk),
CLK(NULL, "gpio", &gpio_clk),
CLK("i2c_davinci.2", NULL, &i2c1_clk),
CLK(NULL, "usb11", &usb11_clk),
@@ -1199,7 +1200,6 @@
.gpio_base = DA8XX_GPIO_BASE,
.gpio_num = 128,
.gpio_irq = IRQ_DA8XX_GPIO0,
- .serial_dev = &da8xx_serial_device,
.emac_pdata = &da8xx_emac_pdata,
};
diff --git a/arch/arm/mach-davinci/da850.c b/arch/arm/mach-davinci/da850.c
index a0d4f60..f56e5fb 100644
--- a/arch/arm/mach-davinci/da850.c
+++ b/arch/arm/mach-davinci/da850.c
@@ -451,9 +451,9 @@
CLK(NULL, "tpcc1", &tpcc1_clk),
CLK(NULL, "tptc2", &tptc2_clk),
CLK("pruss_uio", "pruss", &pruss_clk),
- CLK(NULL, "uart0", &uart0_clk),
- CLK(NULL, "uart1", &uart1_clk),
- CLK(NULL, "uart2", &uart2_clk),
+ CLK("serial8250.0", NULL, &uart0_clk),
+ CLK("serial8250.1", NULL, &uart1_clk),
+ CLK("serial8250.2", NULL, &uart2_clk),
CLK(NULL, "aintc", &aintc_clk),
CLK(NULL, "gpio", &gpio_clk),
CLK("i2c_davinci.2", NULL, &i2c1_clk),
@@ -461,6 +461,7 @@
CLK(NULL, "arm", &arm_clk),
CLK(NULL, "rmii", &rmii_clk),
CLK("davinci_emac.1", NULL, &emac_clk),
+ CLK("davinci_mdio.0", "fck", &emac_clk),
CLK("davinci-mcasp.0", NULL, &mcasp_clk),
CLK("da8xx_lcdc.0", "fck", &lcdc_clk),
CLK("da830-mmc.0", NULL, &mmcsd0_clk),
@@ -1301,7 +1302,6 @@
.gpio_base = DA8XX_GPIO_BASE,
.gpio_num = 144,
.gpio_irq = IRQ_DA8XX_GPIO0,
- .serial_dev = &da8xx_serial_device,
.emac_pdata = &da8xx_emac_pdata,
.sram_dma = DA8XX_SHARED_RAM_BASE,
.sram_len = SZ_128K,
diff --git a/arch/arm/mach-davinci/da8xx-dt.c b/arch/arm/mach-davinci/da8xx-dt.c
index 961aea8..d2bc574 100644
--- a/arch/arm/mach-davinci/da8xx-dt.c
+++ b/arch/arm/mach-davinci/da8xx-dt.c
@@ -20,13 +20,6 @@
#define DA8XX_NUM_UARTS 3
-static void __init da8xx_uart_clk_enable(void)
-{
- int i;
- for (i = 0; i < DA8XX_NUM_UARTS; i++)
- davinci_serial_setup_clk(i, NULL);
-}
-
static struct of_device_id da8xx_irq_match[] __initdata = {
{ .compatible = "ti,cp-intc", .data = cp_intc_of_init, },
{ }
@@ -47,6 +40,12 @@
OF_DEV_AUXDATA("ti,da850-ecap", 0x01f07000, "ecap", NULL),
OF_DEV_AUXDATA("ti,da850-ecap", 0x01f08000, "ecap", NULL),
OF_DEV_AUXDATA("ti,da830-spi", 0x01f0e000, "spi_davinci.1", NULL),
+ OF_DEV_AUXDATA("ns16550a", 0x01c42000, "serial8250.0", NULL),
+ OF_DEV_AUXDATA("ns16550a", 0x01d0c000, "serial8250.1", NULL),
+ OF_DEV_AUXDATA("ns16550a", 0x01d0d000, "serial8250.2", NULL),
+ OF_DEV_AUXDATA("ti,davinci_mdio", 0x01e24000, "davinci_mdio.0", NULL),
+ OF_DEV_AUXDATA("ti,davinci-dm6467-emac", 0x01e20000, "davinci_emac.1",
+ NULL),
{}
};
@@ -57,7 +56,6 @@
of_platform_populate(NULL, of_default_bus_match_table,
da850_auxdata_lookup, NULL);
- da8xx_uart_clk_enable();
}
static const char *da850_boards_compat[] __initdata = {
diff --git a/arch/arm/mach-davinci/davinci.h b/arch/arm/mach-davinci/davinci.h
index a883043..2ab5d57 100644
--- a/arch/arm/mach-davinci/davinci.h
+++ b/arch/arm/mach-davinci/davinci.h
@@ -106,4 +106,9 @@
void dm646x_video_init(void);
void dm646x_setup_vpif(struct vpif_display_config *,
struct vpif_capture_config *);
+
+extern struct platform_device dm365_serial_device[];
+extern struct platform_device dm355_serial_device[];
+extern struct platform_device dm644x_serial_device[];
+extern struct platform_device dm646x_serial_device[];
#endif /*__DAVINCI_H */
diff --git a/arch/arm/mach-davinci/devices-da8xx.c b/arch/arm/mach-davinci/devices-da8xx.c
index 71a46a3..2e473fe 100644
--- a/arch/arm/mach-davinci/devices-da8xx.c
+++ b/arch/arm/mach-davinci/devices-da8xx.c
@@ -68,7 +68,7 @@
void __iomem *da8xx_syscfg0_base;
void __iomem *da8xx_syscfg1_base;
-static struct plat_serial8250_port da8xx_serial_pdata[] = {
+static struct plat_serial8250_port da8xx_serial0_pdata[] = {
{
.mapbase = DA8XX_UART0_BASE,
.irq = IRQ_DA8XX_UARTINT0,
@@ -78,6 +78,11 @@
.regshift = 2,
},
{
+ .flags = 0,
+ }
+};
+static struct plat_serial8250_port da8xx_serial1_pdata[] = {
+ {
.mapbase = DA8XX_UART1_BASE,
.irq = IRQ_DA8XX_UARTINT1,
.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST |
@@ -86,6 +91,11 @@
.regshift = 2,
},
{
+ .flags = 0,
+ }
+};
+static struct plat_serial8250_port da8xx_serial2_pdata[] = {
+ {
.mapbase = DA8XX_UART2_BASE,
.irq = IRQ_DA8XX_UARTINT2,
.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST |
@@ -95,15 +105,33 @@
},
{
.flags = 0,
- },
+ }
};
-struct platform_device da8xx_serial_device = {
- .name = "serial8250",
- .id = PLAT8250_DEV_PLATFORM,
- .dev = {
- .platform_data = da8xx_serial_pdata,
+struct platform_device da8xx_serial_device[] = {
+ {
+ .name = "serial8250",
+ .id = PLAT8250_DEV_PLATFORM,
+ .dev = {
+ .platform_data = da8xx_serial0_pdata,
+ }
},
+ {
+ .name = "serial8250",
+ .id = PLAT8250_DEV_PLATFORM1,
+ .dev = {
+ .platform_data = da8xx_serial1_pdata,
+ }
+ },
+ {
+ .name = "serial8250",
+ .id = PLAT8250_DEV_PLATFORM2,
+ .dev = {
+ .platform_data = da8xx_serial2_pdata,
+ }
+ },
+ {
+ }
};
static s8 da8xx_queue_tc_mapping[][2] = {
@@ -453,12 +481,8 @@
ret = platform_device_register(&da8xx_mdio_device);
if (ret < 0)
return ret;
- ret = platform_device_register(&da8xx_emac_device);
- if (ret < 0)
- return ret;
- ret = clk_add_alias(NULL, dev_name(&da8xx_mdio_device.dev),
- NULL, &da8xx_emac_device.dev);
- return ret;
+
+ return platform_device_register(&da8xx_emac_device);
}
static struct resource da830_mcasp1_resources[] = {
@@ -828,14 +852,7 @@
int da8xx_register_rtc(void)
{
- int ret;
-
- ret = platform_device_register(&da8xx_rtc_device);
- if (!ret)
- /* Atleast on DA850, RTC is a wakeup source */
- device_init_wakeup(&da8xx_rtc_device.dev, true);
-
- return ret;
+ return platform_device_register(&da8xx_rtc_device);
}
static void __iomem *da8xx_ddr2_ctlr_base;
diff --git a/arch/arm/mach-davinci/devices-tnetv107x.c b/arch/arm/mach-davinci/devices-tnetv107x.c
index 128cb9a..01d8686 100644
--- a/arch/arm/mach-davinci/devices-tnetv107x.c
+++ b/arch/arm/mach-davinci/devices-tnetv107x.c
@@ -126,7 +126,7 @@
.dev.platform_data = tnetv107x_edma_info,
};
-static struct plat_serial8250_port serial_data[] = {
+static struct plat_serial8250_port serial0_platform_data[] = {
{
.mapbase = TNETV107X_UART0_BASE,
.irq = IRQ_TNETV107X_UART0,
@@ -137,6 +137,11 @@
.regshift = 2,
},
{
+ .flags = 0,
+ }
+};
+static struct plat_serial8250_port serial1_platform_data[] = {
+ {
.mapbase = TNETV107X_UART1_BASE,
.irq = IRQ_TNETV107X_UART1,
.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST |
@@ -146,6 +151,11 @@
.regshift = 2,
},
{
+ .flags = 0,
+ }
+};
+static struct plat_serial8250_port serial2_platform_data[] = {
+ {
.mapbase = TNETV107X_UART2_BASE,
.irq = IRQ_TNETV107X_UART2,
.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST |
@@ -156,13 +166,28 @@
},
{
.flags = 0,
- },
+ }
};
-struct platform_device tnetv107x_serial_device = {
- .name = "serial8250",
- .id = PLAT8250_DEV_PLATFORM,
- .dev.platform_data = serial_data,
+
+struct platform_device tnetv107x_serial_device[] = {
+ {
+ .name = "serial8250",
+ .id = PLAT8250_DEV_PLATFORM,
+ .dev.platform_data = serial0_platform_data,
+ },
+ {
+ .name = "serial8250",
+ .id = PLAT8250_DEV_PLATFORM1,
+ .dev.platform_data = serial1_platform_data,
+ },
+ {
+ .name = "serial8250",
+ .id = PLAT8250_DEV_PLATFORM2,
+ .dev.platform_data = serial2_platform_data,
+ },
+ {
+ }
};
static struct resource mmc0_resources[] = {
@@ -385,7 +410,7 @@
platform_device_register(&tsc_device);
if (info->serial_config)
- davinci_serial_init(info->serial_config);
+ davinci_serial_init(tnetv107x_serial_device);
for (i = 0; i < 2; i++)
if (info->mmc_config[i]) {
diff --git a/arch/arm/mach-davinci/dm355.c b/arch/arm/mach-davinci/dm355.c
index 86100d1..3eaa5f6 100644
--- a/arch/arm/mach-davinci/dm355.c
+++ b/arch/arm/mach-davinci/dm355.c
@@ -357,9 +357,9 @@
CLK(NULL, "clkout3", &clkout3_clk),
CLK(NULL, "arm", &arm_clk),
CLK(NULL, "mjcp", &mjcp_clk),
- CLK(NULL, "uart0", &uart0_clk),
- CLK(NULL, "uart1", &uart1_clk),
- CLK(NULL, "uart2", &uart2_clk),
+ CLK("serial8250.0", NULL, &uart0_clk),
+ CLK("serial8250.1", NULL, &uart1_clk),
+ CLK("serial8250.2", NULL, &uart2_clk),
CLK("i2c_davinci.1", NULL, &i2c_clk),
CLK("davinci-mcbsp.0", NULL, &asp0_clk),
CLK("davinci-mcbsp.1", NULL, &asp1_clk),
@@ -922,7 +922,7 @@
.clocksource_id = T0_TOP,
};
-static struct plat_serial8250_port dm355_serial_platform_data[] = {
+static struct plat_serial8250_port dm355_serial0_platform_data[] = {
{
.mapbase = DAVINCI_UART0_BASE,
.irq = IRQ_UARTINT0,
@@ -932,6 +932,11 @@
.regshift = 2,
},
{
+ .flags = 0,
+ }
+};
+static struct plat_serial8250_port dm355_serial1_platform_data[] = {
+ {
.mapbase = DAVINCI_UART1_BASE,
.irq = IRQ_UARTINT1,
.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST |
@@ -940,6 +945,11 @@
.regshift = 2,
},
{
+ .flags = 0,
+ }
+};
+static struct plat_serial8250_port dm355_serial2_platform_data[] = {
+ {
.mapbase = DM355_UART2_BASE,
.irq = IRQ_DM355_UARTINT2,
.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST |
@@ -948,16 +958,34 @@
.regshift = 2,
},
{
- .flags = 0
- },
+ .flags = 0,
+ }
};
-static struct platform_device dm355_serial_device = {
- .name = "serial8250",
- .id = PLAT8250_DEV_PLATFORM,
- .dev = {
- .platform_data = dm355_serial_platform_data,
+struct platform_device dm355_serial_device[] = {
+ {
+ .name = "serial8250",
+ .id = PLAT8250_DEV_PLATFORM,
+ .dev = {
+ .platform_data = dm355_serial0_platform_data,
+ }
},
+ {
+ .name = "serial8250",
+ .id = PLAT8250_DEV_PLATFORM1,
+ .dev = {
+ .platform_data = dm355_serial1_platform_data,
+ }
+ },
+ {
+ .name = "serial8250",
+ .id = PLAT8250_DEV_PLATFORM2,
+ .dev = {
+ .platform_data = dm355_serial2_platform_data,
+ }
+ },
+ {
+ }
};
static struct davinci_soc_info davinci_soc_info_dm355 = {
@@ -981,7 +1009,6 @@
.gpio_base = DAVINCI_GPIO_BASE,
.gpio_num = 104,
.gpio_irq = IRQ_DM355_GPIOBNK0,
- .serial_dev = &dm355_serial_device,
.sram_dma = 0x00010000,
.sram_len = SZ_32K,
};
diff --git a/arch/arm/mach-davinci/dm365.c b/arch/arm/mach-davinci/dm365.c
index dad2802..c29e324 100644
--- a/arch/arm/mach-davinci/dm365.c
+++ b/arch/arm/mach-davinci/dm365.c
@@ -455,8 +455,8 @@
CLK("vpss", "master", &vpss_master_clk),
CLK("vpss", "slave", &vpss_slave_clk),
CLK(NULL, "arm", &arm_clk),
- CLK(NULL, "uart0", &uart0_clk),
- CLK(NULL, "uart1", &uart1_clk),
+ CLK("serial8250.0", NULL, &uart0_clk),
+ CLK("serial8250.1", NULL, &uart1_clk),
CLK("i2c_davinci.1", NULL, &i2c_clk),
CLK("da830-mmc.0", NULL, &mmcsd0_clk),
CLK("da830-mmc.1", NULL, &mmcsd1_clk),
@@ -477,6 +477,7 @@
CLK(NULL, "timer3", &timer3_clk),
CLK(NULL, "usb", &usb_clk),
CLK("davinci_emac.1", NULL, &emac_clk),
+ CLK("davinci_mdio.0", "fck", &emac_clk),
CLK("davinci_voicecodec", NULL, &voicecodec_clk),
CLK("davinci-mcbsp", NULL, &asp0_clk),
CLK(NULL, "rto", &rto_clk),
@@ -1041,7 +1042,7 @@
#define DM365_UART1_BASE (IO_PHYS + 0x106000)
-static struct plat_serial8250_port dm365_serial_platform_data[] = {
+static struct plat_serial8250_port dm365_serial0_platform_data[] = {
{
.mapbase = DAVINCI_UART0_BASE,
.irq = IRQ_UARTINT0,
@@ -1051,6 +1052,11 @@
.regshift = 2,
},
{
+ .flags = 0,
+ }
+};
+static struct plat_serial8250_port dm365_serial1_platform_data[] = {
+ {
.mapbase = DM365_UART1_BASE,
.irq = IRQ_UARTINT1,
.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST |
@@ -1059,16 +1065,27 @@
.regshift = 2,
},
{
- .flags = 0
- },
+ .flags = 0,
+ }
};
-static struct platform_device dm365_serial_device = {
- .name = "serial8250",
- .id = PLAT8250_DEV_PLATFORM,
- .dev = {
- .platform_data = dm365_serial_platform_data,
+struct platform_device dm365_serial_device[] = {
+ {
+ .name = "serial8250",
+ .id = PLAT8250_DEV_PLATFORM,
+ .dev = {
+ .platform_data = dm365_serial0_platform_data,
+ }
},
+ {
+ .name = "serial8250",
+ .id = PLAT8250_DEV_PLATFORM1,
+ .dev = {
+ .platform_data = dm365_serial1_platform_data,
+ }
+ },
+ {
+ }
};
static struct davinci_soc_info davinci_soc_info_dm365 = {
@@ -1093,7 +1110,6 @@
.gpio_num = 104,
.gpio_irq = IRQ_DM365_GPIO0,
.gpio_unbanked = 8, /* really 16 ... skip muxed GPIOs */
- .serial_dev = &dm365_serial_device,
.emac_pdata = &dm365_emac_pdata,
.sram_dma = 0x00010000,
.sram_len = SZ_32K,
@@ -1407,8 +1423,6 @@
platform_device_register(&dm365_mdio_device);
platform_device_register(&dm365_emac_device);
- clk_add_alias(NULL, dev_name(&dm365_mdio_device.dev),
- NULL, &dm365_emac_device.dev);
return 0;
}
diff --git a/arch/arm/mach-davinci/dm644x.c b/arch/arm/mach-davinci/dm644x.c
index a49d182..4f74682 100644
--- a/arch/arm/mach-davinci/dm644x.c
+++ b/arch/arm/mach-davinci/dm644x.c
@@ -303,10 +303,11 @@
CLK("vpss", "master", &vpss_master_clk),
CLK("vpss", "slave", &vpss_slave_clk),
CLK(NULL, "arm", &arm_clk),
- CLK(NULL, "uart0", &uart0_clk),
- CLK(NULL, "uart1", &uart1_clk),
- CLK(NULL, "uart2", &uart2_clk),
+ CLK("serial8250.0", NULL, &uart0_clk),
+ CLK("serial8250.1", NULL, &uart1_clk),
+ CLK("serial8250.2", NULL, &uart2_clk),
CLK("davinci_emac.1", NULL, &emac_clk),
+ CLK("davinci_mdio.0", "fck", &emac_clk),
CLK("i2c_davinci.1", NULL, &i2c_clk),
CLK("palm_bk3710", NULL, &ide_clk),
CLK("davinci-mcbsp", NULL, &asp_clk),
@@ -813,7 +814,7 @@
.clocksource_id = T0_TOP,
};
-static struct plat_serial8250_port dm644x_serial_platform_data[] = {
+static struct plat_serial8250_port dm644x_serial0_platform_data[] = {
{
.mapbase = DAVINCI_UART0_BASE,
.irq = IRQ_UARTINT0,
@@ -823,6 +824,11 @@
.regshift = 2,
},
{
+ .flags = 0,
+ }
+};
+static struct plat_serial8250_port dm644x_serial1_platform_data[] = {
+ {
.mapbase = DAVINCI_UART1_BASE,
.irq = IRQ_UARTINT1,
.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST |
@@ -831,6 +837,11 @@
.regshift = 2,
},
{
+ .flags = 0,
+ }
+};
+static struct plat_serial8250_port dm644x_serial2_platform_data[] = {
+ {
.mapbase = DAVINCI_UART2_BASE,
.irq = IRQ_UARTINT2,
.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST |
@@ -839,16 +850,34 @@
.regshift = 2,
},
{
- .flags = 0
- },
+ .flags = 0,
+ }
};
-static struct platform_device dm644x_serial_device = {
- .name = "serial8250",
- .id = PLAT8250_DEV_PLATFORM,
- .dev = {
- .platform_data = dm644x_serial_platform_data,
+struct platform_device dm644x_serial_device[] = {
+ {
+ .name = "serial8250",
+ .id = PLAT8250_DEV_PLATFORM,
+ .dev = {
+ .platform_data = dm644x_serial0_platform_data,
+ }
},
+ {
+ .name = "serial8250",
+ .id = PLAT8250_DEV_PLATFORM1,
+ .dev = {
+ .platform_data = dm644x_serial1_platform_data,
+ }
+ },
+ {
+ .name = "serial8250",
+ .id = PLAT8250_DEV_PLATFORM2,
+ .dev = {
+ .platform_data = dm644x_serial2_platform_data,
+ }
+ },
+ {
+ }
};
static struct davinci_soc_info davinci_soc_info_dm644x = {
@@ -872,7 +901,6 @@
.gpio_base = DAVINCI_GPIO_BASE,
.gpio_num = 71,
.gpio_irq = IRQ_GPIOBNK0,
- .serial_dev = &dm644x_serial_device,
.emac_pdata = &dm644x_emac_pdata,
.sram_dma = 0x00008000,
.sram_len = SZ_16K,
@@ -923,8 +951,6 @@
platform_device_register(&dm644x_mdio_device);
platform_device_register(&dm644x_emac_device);
- clk_add_alias(NULL, dev_name(&dm644x_mdio_device.dev),
- NULL, &dm644x_emac_device.dev);
return 0;
}
diff --git a/arch/arm/mach-davinci/dm646x.c b/arch/arm/mach-davinci/dm646x.c
index d1259e8..68f8d1f 100644
--- a/arch/arm/mach-davinci/dm646x.c
+++ b/arch/arm/mach-davinci/dm646x.c
@@ -342,15 +342,16 @@
CLK(NULL, "edma_tc1", &edma_tc1_clk),
CLK(NULL, "edma_tc2", &edma_tc2_clk),
CLK(NULL, "edma_tc3", &edma_tc3_clk),
- CLK(NULL, "uart0", &uart0_clk),
- CLK(NULL, "uart1", &uart1_clk),
- CLK(NULL, "uart2", &uart2_clk),
+ CLK("serial8250.0", NULL, &uart0_clk),
+ CLK("serial8250.1", NULL, &uart1_clk),
+ CLK("serial8250.2", NULL, &uart2_clk),
CLK("i2c_davinci.1", NULL, &i2c_clk),
CLK(NULL, "gpio", &gpio_clk),
CLK("davinci-mcasp.0", NULL, &mcasp0_clk),
CLK("davinci-mcasp.1", NULL, &mcasp1_clk),
CLK(NULL, "aemif", &aemif_clk),
CLK("davinci_emac.1", NULL, &emac_clk),
+ CLK("davinci_mdio.0", "fck", &emac_clk),
CLK(NULL, "pwm0", &pwm0_clk),
CLK(NULL, "pwm1", &pwm1_clk),
CLK(NULL, "timer0", &timer0_clk),
@@ -790,7 +791,7 @@
.clocksource_id = T0_TOP,
};
-static struct plat_serial8250_port dm646x_serial_platform_data[] = {
+static struct plat_serial8250_port dm646x_serial0_platform_data[] = {
{
.mapbase = DAVINCI_UART0_BASE,
.irq = IRQ_UARTINT0,
@@ -800,6 +801,11 @@
.regshift = 2,
},
{
+ .flags = 0,
+ }
+};
+static struct plat_serial8250_port dm646x_serial1_platform_data[] = {
+ {
.mapbase = DAVINCI_UART1_BASE,
.irq = IRQ_UARTINT1,
.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST |
@@ -808,6 +814,11 @@
.regshift = 2,
},
{
+ .flags = 0,
+ }
+};
+static struct plat_serial8250_port dm646x_serial2_platform_data[] = {
+ {
.mapbase = DAVINCI_UART2_BASE,
.irq = IRQ_DM646X_UARTINT2,
.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST |
@@ -816,16 +827,34 @@
.regshift = 2,
},
{
- .flags = 0
- },
+ .flags = 0,
+ }
};
-static struct platform_device dm646x_serial_device = {
- .name = "serial8250",
- .id = PLAT8250_DEV_PLATFORM,
- .dev = {
- .platform_data = dm646x_serial_platform_data,
+struct platform_device dm646x_serial_device[] = {
+ {
+ .name = "serial8250",
+ .id = PLAT8250_DEV_PLATFORM,
+ .dev = {
+ .platform_data = dm646x_serial0_platform_data,
+ }
},
+ {
+ .name = "serial8250",
+ .id = PLAT8250_DEV_PLATFORM1,
+ .dev = {
+ .platform_data = dm646x_serial1_platform_data,
+ }
+ },
+ {
+ .name = "serial8250",
+ .id = PLAT8250_DEV_PLATFORM2,
+ .dev = {
+ .platform_data = dm646x_serial2_platform_data,
+ }
+ },
+ {
+ }
};
static struct davinci_soc_info davinci_soc_info_dm646x = {
@@ -849,7 +878,6 @@
.gpio_base = DAVINCI_GPIO_BASE,
.gpio_num = 43, /* Only 33 usable */
.gpio_irq = IRQ_DM646X_GPIOBNK0,
- .serial_dev = &dm646x_serial_device,
.emac_pdata = &dm646x_emac_pdata,
.sram_dma = 0x10010000,
.sram_len = SZ_32K,
@@ -913,8 +941,6 @@
platform_device_register(&dm646x_mdio_device);
platform_device_register(&dm646x_emac_device);
- clk_add_alias(NULL, dev_name(&dm646x_mdio_device.dev),
- NULL, &dm646x_emac_device.dev);
return 0;
}
diff --git a/arch/arm/mach-davinci/include/mach/common.h b/arch/arm/mach-davinci/include/mach/common.h
index cce316b..0b3c169 100644
--- a/arch/arm/mach-davinci/include/mach/common.h
+++ b/arch/arm/mach-davinci/include/mach/common.h
@@ -72,7 +72,6 @@
unsigned gpio_unbanked;
struct davinci_gpio_controller *gpio_ctlrs;
int gpio_ctlrs_num;
- struct platform_device *serial_dev;
struct emac_platform_data *emac_pdata;
dma_addr_t sram_dma;
unsigned sram_len;
diff --git a/arch/arm/mach-davinci/include/mach/da8xx.h b/arch/arm/mach-davinci/include/mach/da8xx.h
index 7b41a5e..aae5307 100644
--- a/arch/arm/mach-davinci/include/mach/da8xx.h
+++ b/arch/arm/mach-davinci/include/mach/da8xx.h
@@ -111,7 +111,7 @@
void da8xx_rproc_reserve_cma(void);
int da8xx_register_rproc(void);
-extern struct platform_device da8xx_serial_device;
+extern struct platform_device da8xx_serial_device[];
extern struct emac_platform_data da8xx_emac_pdata;
extern struct da8xx_lcdc_platform_data sharp_lcd035q3dg01_pdata;
extern struct da8xx_lcdc_platform_data sharp_lk043t1dg01_pdata;
diff --git a/arch/arm/mach-davinci/include/mach/serial.h b/arch/arm/mach-davinci/include/mach/serial.h
index 62ad300..52b8571 100644
--- a/arch/arm/mach-davinci/include/mach/serial.h
+++ b/arch/arm/mach-davinci/include/mach/serial.h
@@ -15,6 +15,8 @@
#include <mach/hardware.h>
+#include <linux/platform_device.h>
+
#define DAVINCI_UART0_BASE (IO_PHYS + 0x20000)
#define DAVINCI_UART1_BASE (IO_PHYS + 0x20400)
#define DAVINCI_UART2_BASE (IO_PHYS + 0x20800)
@@ -37,13 +39,7 @@
#define UART_DM646X_SCR_TX_WATERMARK 0x08
#ifndef __ASSEMBLY__
-struct davinci_uart_config {
- /* Bit field of UARTs present; bit 0 --> UART0 */
- unsigned int enabled_uarts;
-};
-
-extern int davinci_serial_init(struct davinci_uart_config *);
-extern int davinci_serial_setup_clk(unsigned instance, unsigned int *rate);
+extern int davinci_serial_init(struct platform_device *);
#endif
#endif /* __ASM_ARCH_SERIAL_H */
diff --git a/arch/arm/mach-davinci/include/mach/tnetv107x.h b/arch/arm/mach-davinci/include/mach/tnetv107x.h
index 16314c6..494fcf5 100644
--- a/arch/arm/mach-davinci/include/mach/tnetv107x.h
+++ b/arch/arm/mach-davinci/include/mach/tnetv107x.h
@@ -42,7 +42,6 @@
#include <mach/serial.h>
struct tnetv107x_device_info {
- struct davinci_uart_config *serial_config;
struct davinci_mmc_config *mmc_config[2]; /* 2 controllers */
struct davinci_nand_pdata *nand_config[4]; /* 4 chipsels */
struct matrix_keypad_platform_data *keypad_config;
@@ -50,7 +49,7 @@
};
extern struct platform_device tnetv107x_wdt_device;
-extern struct platform_device tnetv107x_serial_device;
+extern struct platform_device tnetv107x_serial_device[];
extern void tnetv107x_init(void);
extern void tnetv107x_devices_init(struct tnetv107x_device_info *);
diff --git a/arch/arm/mach-davinci/serial.c b/arch/arm/mach-davinci/serial.c
index f262581..5e93a73 100644
--- a/arch/arm/mach-davinci/serial.c
+++ b/arch/arm/mach-davinci/serial.c
@@ -70,49 +70,36 @@
UART_DM646X_SCR_TX_WATERMARK);
}
-/* Enable UART clock and obtain its rate */
-int __init davinci_serial_setup_clk(unsigned instance, unsigned int *rate)
+int __init davinci_serial_init(struct platform_device *serial_dev)
{
- char name[16];
+ int i, ret = 0;
+ struct device *dev;
+ struct plat_serial8250_port *p;
struct clk *clk;
- struct davinci_soc_info *soc_info = &davinci_soc_info;
- struct device *dev = &soc_info->serial_dev->dev;
-
- sprintf(name, "uart%d", instance);
- clk = clk_get(dev, name);
- if (IS_ERR(clk)) {
- pr_err("%s:%d: failed to get UART%d clock\n",
- __func__, __LINE__, instance);
- return PTR_ERR(clk);
- }
-
- clk_prepare_enable(clk);
-
- if (rate)
- *rate = clk_get_rate(clk);
-
- return 0;
-}
-
-int __init davinci_serial_init(struct davinci_uart_config *info)
-{
- int i, ret;
- struct davinci_soc_info *soc_info = &davinci_soc_info;
- struct device *dev = &soc_info->serial_dev->dev;
- struct plat_serial8250_port *p = dev->platform_data;
/*
* Make sure the serial ports are muxed on at this point.
* You have to mux them off in device drivers later on if not needed.
*/
- for (i = 0; p->flags; i++, p++) {
- if (!(info->enabled_uarts & (1 << i)))
- continue;
+ for (i = 0; serial_dev[i].dev.platform_data != NULL; i++) {
+ dev = &serial_dev[i].dev;
+ p = dev->platform_data;
- ret = davinci_serial_setup_clk(i, &p->uartclk);
+ ret = platform_device_register(&serial_dev[i]);
if (ret)
continue;
+ clk = clk_get(dev, NULL);
+ if (IS_ERR(clk)) {
+ pr_err("%s:%d: failed to get UART%d clock\n",
+ __func__, __LINE__, i);
+ continue;
+ }
+
+ clk_prepare_enable(clk);
+
+ p->uartclk = clk_get_rate(clk);
+
if (!p->membase && p->mapbase) {
p->membase = ioremap(p->mapbase, SZ_4K);
@@ -125,6 +112,5 @@
if (p->membase && p->type != PORT_AR7)
davinci_serial_reset(p);
}
-
- return platform_device_register(soc_info->serial_dev);
+ return ret;
}
diff --git a/arch/arm/mach-davinci/tnetv107x.c b/arch/arm/mach-davinci/tnetv107x.c
index 4545667..f4d7fbb 100644
--- a/arch/arm/mach-davinci/tnetv107x.c
+++ b/arch/arm/mach-davinci/tnetv107x.c
@@ -264,7 +264,7 @@
CLK(NULL, "clk_chipcfg", &clk_chipcfg),
CLK("tnetv107x-ts.0", NULL, &clk_tsc),
CLK(NULL, "clk_rom", &clk_rom),
- CLK(NULL, "uart2", &clk_uart2),
+ CLK("serial8250.2", NULL, &clk_uart2),
CLK(NULL, "clk_pktsec", &clk_pktsec),
CLK("tnetv107x-rng.0", NULL, &clk_rng),
CLK("tnetv107x-pka.0", NULL, &clk_pka),
@@ -274,8 +274,8 @@
CLK(NULL, "clk_gpio", &clk_gpio),
CLK(NULL, "clk_mdio", &clk_mdio),
CLK("dm6441-mmc.0", NULL, &clk_sdio0),
- CLK(NULL, "uart0", &clk_uart0),
- CLK(NULL, "uart1", &clk_uart1),
+ CLK("serial8250.0", NULL, &clk_uart0),
+ CLK("serial8250.1", NULL, &clk_uart1),
CLK(NULL, "timer0", &clk_timer0),
CLK(NULL, "timer1", &clk_timer1),
CLK("tnetv107x_wdt.0", NULL, &clk_wdt_arm),
@@ -757,7 +757,7 @@
.gpio_type = GPIO_TYPE_TNETV107X,
.gpio_num = TNETV107X_N_GPIO,
.timer_info = &timer_info,
- .serial_dev = &tnetv107x_serial_device,
+ .serial_dev = tnetv107x_serial_device,
};
void __init tnetv107x_init(void)
diff --git a/arch/arm/mach-dove/common.c b/arch/arm/mach-dove/common.c
index 304f069..c122bcf 100644
--- a/arch/arm/mach-dove/common.c
+++ b/arch/arm/mach-dove/common.c
@@ -27,6 +27,22 @@
#include <plat/time.h>
#include "common.h"
+/* These can go away once Dove uses the mvebu-mbus DT binding */
+#define DOVE_MBUS_PCIE0_MEM_TARGET 0x4
+#define DOVE_MBUS_PCIE0_MEM_ATTR 0xe8
+#define DOVE_MBUS_PCIE0_IO_TARGET 0x4
+#define DOVE_MBUS_PCIE0_IO_ATTR 0xe0
+#define DOVE_MBUS_PCIE1_MEM_TARGET 0x8
+#define DOVE_MBUS_PCIE1_MEM_ATTR 0xe8
+#define DOVE_MBUS_PCIE1_IO_TARGET 0x8
+#define DOVE_MBUS_PCIE1_IO_ATTR 0xe0
+#define DOVE_MBUS_CESA_TARGET 0x3
+#define DOVE_MBUS_CESA_ATTR 0x1
+#define DOVE_MBUS_BOOTROM_TARGET 0x1
+#define DOVE_MBUS_BOOTROM_ATTR 0xfd
+#define DOVE_MBUS_SCRATCHPAD_TARGET 0xd
+#define DOVE_MBUS_SCRATCHPAD_ATTR 0x0
+
/*****************************************************************************
* I/O Address Mapping
****************************************************************************/
@@ -332,34 +348,40 @@
{
/*
* The PCIe windows will no longer be statically allocated
- * here once Dove is migrated to the pci-mvebu driver.
+ * here once Dove is migrated to the pci-mvebu driver. The
+ * non-PCIe windows will no longer be created here once Dove
+ * fully moves to DT.
*/
- mvebu_mbus_add_window_remap_flags("pcie0.0",
+ mvebu_mbus_add_window_remap_by_id(DOVE_MBUS_PCIE0_IO_TARGET,
+ DOVE_MBUS_PCIE0_IO_ATTR,
DOVE_PCIE0_IO_PHYS_BASE,
DOVE_PCIE0_IO_SIZE,
- DOVE_PCIE0_IO_BUS_BASE,
- MVEBU_MBUS_PCI_IO);
- mvebu_mbus_add_window_remap_flags("pcie1.0",
+ DOVE_PCIE0_IO_BUS_BASE);
+ mvebu_mbus_add_window_remap_by_id(DOVE_MBUS_PCIE1_IO_TARGET,
+ DOVE_MBUS_PCIE1_IO_ATTR,
DOVE_PCIE1_IO_PHYS_BASE,
DOVE_PCIE1_IO_SIZE,
- DOVE_PCIE1_IO_BUS_BASE,
- MVEBU_MBUS_PCI_IO);
- mvebu_mbus_add_window_remap_flags("pcie0.0",
- DOVE_PCIE0_MEM_PHYS_BASE,
- DOVE_PCIE0_MEM_SIZE,
- MVEBU_MBUS_NO_REMAP,
- MVEBU_MBUS_PCI_MEM);
- mvebu_mbus_add_window_remap_flags("pcie1.0",
- DOVE_PCIE1_MEM_PHYS_BASE,
- DOVE_PCIE1_MEM_SIZE,
- MVEBU_MBUS_NO_REMAP,
- MVEBU_MBUS_PCI_MEM);
- mvebu_mbus_add_window("cesa", DOVE_CESA_PHYS_BASE,
- DOVE_CESA_SIZE);
- mvebu_mbus_add_window("bootrom", DOVE_BOOTROM_PHYS_BASE,
- DOVE_BOOTROM_SIZE);
- mvebu_mbus_add_window("scratchpad", DOVE_SCRATCHPAD_PHYS_BASE,
- DOVE_SCRATCHPAD_SIZE);
+ DOVE_PCIE1_IO_BUS_BASE);
+ mvebu_mbus_add_window_by_id(DOVE_MBUS_PCIE0_MEM_TARGET,
+ DOVE_MBUS_PCIE0_MEM_ATTR,
+ DOVE_PCIE0_MEM_PHYS_BASE,
+ DOVE_PCIE0_MEM_SIZE);
+ mvebu_mbus_add_window_by_id(DOVE_MBUS_PCIE1_MEM_TARGET,
+ DOVE_MBUS_PCIE1_MEM_ATTR,
+ DOVE_PCIE1_MEM_PHYS_BASE,
+ DOVE_PCIE1_MEM_SIZE);
+ mvebu_mbus_add_window_by_id(DOVE_MBUS_CESA_TARGET,
+ DOVE_MBUS_CESA_ATTR,
+ DOVE_CESA_PHYS_BASE,
+ DOVE_CESA_SIZE);
+ mvebu_mbus_add_window_by_id(DOVE_MBUS_BOOTROM_TARGET,
+ DOVE_MBUS_BOOTROM_ATTR,
+ DOVE_BOOTROM_PHYS_BASE,
+ DOVE_BOOTROM_SIZE);
+ mvebu_mbus_add_window_by_id(DOVE_MBUS_SCRATCHPAD_TARGET,
+ DOVE_MBUS_SCRATCHPAD_ATTR,
+ DOVE_SCRATCHPAD_PHYS_BASE,
+ DOVE_SCRATCHPAD_SIZE);
}
void __init dove_init(void)
diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
index 1303e33..29a8af6 100644
--- a/arch/arm/mach-imx/Kconfig
+++ b/arch/arm/mach-imx/Kconfig
@@ -1,6 +1,7 @@
config ARCH_MXC
bool "Freescale i.MX family" if ARCH_MULTI_V4_V5 || ARCH_MULTI_V6_V7
select ARCH_REQUIRE_GPIOLIB
+ select ARM_CPU_SUSPEND if PM
select ARM_PATCH_PHYS_VIRT
select AUTO_ZRELADDR if !ZBOOT_ROM
select CLKDEV_LOOKUP
@@ -8,6 +9,7 @@
select GENERIC_ALLOCATOR
select GENERIC_CLOCKEVENTS
select GENERIC_IRQ_CHIP
+ select MIGHT_HAVE_CACHE_L2X0 if ARCH_MULTI_V6_V7
select MULTI_IRQ_HANDLER
select SPARSE_IRQ
select USE_OF
@@ -785,7 +787,6 @@
bool "i.MX6 Quad/DualLite support"
select ARCH_HAS_CPUFREQ
select ARCH_HAS_OPP
- select ARM_CPU_SUSPEND if PM
select ARM_ERRATA_754322
select ARM_ERRATA_764369 if SMP
select ARM_ERRATA_775420
diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile
index e20f22d..5383c58 100644
--- a/arch/arm/mach-imx/Makefile
+++ b/arch/arm/mach-imx/Makefile
@@ -15,7 +15,8 @@
obj-$(CONFIG_SOC_IMX5) += cpu-imx5.o mm-imx5.o clk-imx51-imx53.o ehci-imx5.o $(imx5-pm-y)
obj-$(CONFIG_COMMON_CLK) += clk-pllv1.o clk-pllv2.o clk-pllv3.o clk-gate2.o \
- clk-pfd.o clk-busy.o clk.o
+ clk-pfd.o clk-busy.o clk.o \
+ clk-fixup-div.o clk-fixup-mux.o
obj-$(CONFIG_IMX_HAVE_IOMUX_V1) += iomux-v1.o
obj-$(CONFIG_ARCH_MXC_IOMUX_V3) += iomux-v3.o
diff --git a/arch/arm/mach-imx/anatop.c b/arch/arm/mach-imx/anatop.c
index 0cfa07d..ad3b755 100644
--- a/arch/arm/mach-imx/anatop.c
+++ b/arch/arm/mach-imx/anatop.c
@@ -66,7 +66,7 @@
imx_anatop_enable_weak2p5(false);
}
-void imx_anatop_usb_chrg_detect_disable(void)
+static void imx_anatop_usb_chrg_detect_disable(void)
{
regmap_write(anatop, ANADIG_USB1_CHRG_DETECT,
BM_ANADIG_USB_CHRG_DETECT_EN_B
@@ -100,4 +100,6 @@
pr_err("%s: failed to find imx6q-anatop regmap!\n", __func__);
return;
}
+
+ imx_anatop_usb_chrg_detect_disable();
}
diff --git a/arch/arm/mach-imx/clk-fixup-div.c b/arch/arm/mach-imx/clk-fixup-div.c
new file mode 100644
index 0000000..21db020
--- /dev/null
+++ b/arch/arm/mach-imx/clk-fixup-div.c
@@ -0,0 +1,129 @@
+/*
+ * Copyright (C) 2013 Freescale Semiconductor, Inc.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/slab.h>
+#include "clk.h"
+
+#define to_clk_div(_hw) container_of(_hw, struct clk_divider, hw)
+#define div_mask(d) ((1 << (d->width)) - 1)
+
+/**
+ * struct clk_fixup_div - imx integer fixup divider clock
+ * @divider: the parent class
+ * @ops: pointer to clk_ops of parent class
+ * @fixup: a hook to fixup the write value
+ *
+ * The imx fixup divider clock is a subclass of basic clk_divider
+ * with an addtional fixup hook.
+ */
+struct clk_fixup_div {
+ struct clk_divider divider;
+ const struct clk_ops *ops;
+ void (*fixup)(u32 *val);
+};
+
+static inline struct clk_fixup_div *to_clk_fixup_div(struct clk_hw *hw)
+{
+ struct clk_divider *divider = to_clk_div(hw);
+
+ return container_of(divider, struct clk_fixup_div, divider);
+}
+
+static unsigned long clk_fixup_div_recalc_rate(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ struct clk_fixup_div *fixup_div = to_clk_fixup_div(hw);
+
+ return fixup_div->ops->recalc_rate(&fixup_div->divider.hw, parent_rate);
+}
+
+static long clk_fixup_div_round_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long *prate)
+{
+ struct clk_fixup_div *fixup_div = to_clk_fixup_div(hw);
+
+ return fixup_div->ops->round_rate(&fixup_div->divider.hw, rate, prate);
+}
+
+static int clk_fixup_div_set_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long parent_rate)
+{
+ struct clk_fixup_div *fixup_div = to_clk_fixup_div(hw);
+ struct clk_divider *div = to_clk_div(hw);
+ unsigned int divider, value;
+ unsigned long flags = 0;
+ u32 val;
+
+ divider = parent_rate / rate;
+
+ /* Zero based divider */
+ value = divider - 1;
+
+ if (value > div_mask(div))
+ value = div_mask(div);
+
+ spin_lock_irqsave(div->lock, flags);
+
+ val = readl(div->reg);
+ val &= ~(div_mask(div) << div->shift);
+ val |= value << div->shift;
+ fixup_div->fixup(&val);
+ writel(val, div->reg);
+
+ spin_unlock_irqrestore(div->lock, flags);
+
+ return 0;
+}
+
+static const struct clk_ops clk_fixup_div_ops = {
+ .recalc_rate = clk_fixup_div_recalc_rate,
+ .round_rate = clk_fixup_div_round_rate,
+ .set_rate = clk_fixup_div_set_rate,
+};
+
+struct clk *imx_clk_fixup_divider(const char *name, const char *parent,
+ void __iomem *reg, u8 shift, u8 width,
+ void (*fixup)(u32 *val))
+{
+ struct clk_fixup_div *fixup_div;
+ struct clk *clk;
+ struct clk_init_data init;
+
+ if (!fixup)
+ return ERR_PTR(-EINVAL);
+
+ fixup_div = kzalloc(sizeof(*fixup_div), GFP_KERNEL);
+ if (!fixup_div)
+ return ERR_PTR(-ENOMEM);
+
+ init.name = name;
+ init.ops = &clk_fixup_div_ops;
+ init.flags = CLK_SET_RATE_PARENT;
+ init.parent_names = parent ? &parent : NULL;
+ init.num_parents = parent ? 1 : 0;
+
+ fixup_div->divider.reg = reg;
+ fixup_div->divider.shift = shift;
+ fixup_div->divider.width = width;
+ fixup_div->divider.lock = &imx_ccm_lock;
+ fixup_div->divider.hw.init = &init;
+ fixup_div->ops = &clk_divider_ops;
+ fixup_div->fixup = fixup;
+
+ clk = clk_register(NULL, &fixup_div->divider.hw);
+ if (IS_ERR(clk))
+ kfree(fixup_div);
+
+ return clk;
+}
diff --git a/arch/arm/mach-imx/clk-fixup-mux.c b/arch/arm/mach-imx/clk-fixup-mux.c
new file mode 100644
index 0000000..deb4b80
--- /dev/null
+++ b/arch/arm/mach-imx/clk-fixup-mux.c
@@ -0,0 +1,107 @@
+/*
+ * Copyright (C) 2013 Freescale Semiconductor, Inc.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/slab.h>
+#include "clk.h"
+
+#define to_clk_mux(_hw) container_of(_hw, struct clk_mux, hw)
+
+/**
+ * struct clk_fixup_mux - imx integer fixup multiplexer clock
+ * @mux: the parent class
+ * @ops: pointer to clk_ops of parent class
+ * @fixup: a hook to fixup the write value
+ *
+ * The imx fixup multiplexer clock is a subclass of basic clk_mux
+ * with an addtional fixup hook.
+ */
+struct clk_fixup_mux {
+ struct clk_mux mux;
+ const struct clk_ops *ops;
+ void (*fixup)(u32 *val);
+};
+
+static inline struct clk_fixup_mux *to_clk_fixup_mux(struct clk_hw *hw)
+{
+ struct clk_mux *mux = to_clk_mux(hw);
+
+ return container_of(mux, struct clk_fixup_mux, mux);
+}
+
+static u8 clk_fixup_mux_get_parent(struct clk_hw *hw)
+{
+ struct clk_fixup_mux *fixup_mux = to_clk_fixup_mux(hw);
+
+ return fixup_mux->ops->get_parent(&fixup_mux->mux.hw);
+}
+
+static int clk_fixup_mux_set_parent(struct clk_hw *hw, u8 index)
+{
+ struct clk_fixup_mux *fixup_mux = to_clk_fixup_mux(hw);
+ struct clk_mux *mux = to_clk_mux(hw);
+ unsigned long flags = 0;
+ u32 val;
+
+ spin_lock_irqsave(mux->lock, flags);
+
+ val = readl(mux->reg);
+ val &= ~(mux->mask << mux->shift);
+ val |= index << mux->shift;
+ fixup_mux->fixup(&val);
+ writel(val, mux->reg);
+
+ spin_unlock_irqrestore(mux->lock, flags);
+
+ return 0;
+}
+
+static const struct clk_ops clk_fixup_mux_ops = {
+ .get_parent = clk_fixup_mux_get_parent,
+ .set_parent = clk_fixup_mux_set_parent,
+};
+
+struct clk *imx_clk_fixup_mux(const char *name, void __iomem *reg,
+ u8 shift, u8 width, const char **parents,
+ int num_parents, void (*fixup)(u32 *val))
+{
+ struct clk_fixup_mux *fixup_mux;
+ struct clk *clk;
+ struct clk_init_data init;
+
+ if (!fixup)
+ return ERR_PTR(-EINVAL);
+
+ fixup_mux = kzalloc(sizeof(*fixup_mux), GFP_KERNEL);
+ if (!fixup_mux)
+ return ERR_PTR(-ENOMEM);
+
+ init.name = name;
+ init.ops = &clk_fixup_mux_ops;
+ init.parent_names = parents;
+ init.num_parents = num_parents;
+
+ fixup_mux->mux.reg = reg;
+ fixup_mux->mux.shift = shift;
+ fixup_mux->mux.mask = BIT(width) - 1;
+ fixup_mux->mux.lock = &imx_ccm_lock;
+ fixup_mux->mux.hw.init = &init;
+ fixup_mux->ops = &clk_mux_ops;
+ fixup_mux->fixup = fixup;
+
+ clk = clk_register(NULL, &fixup_mux->mux.hw);
+ if (IS_ERR(clk))
+ kfree(fixup_mux);
+
+ return clk;
+}
diff --git a/arch/arm/mach-imx/clk-imx51-imx53.c b/arch/arm/mach-imx/clk-imx51-imx53.c
index 9afac26..1a56a33 100644
--- a/arch/arm/mach-imx/clk-imx51-imx53.c
+++ b/arch/arm/mach-imx/clk-imx51-imx53.c
@@ -119,7 +119,7 @@
srtc_gate, pata_gate, sata_gate, spdif_xtal_sel, spdif0_sel,
spdif1_sel, spdif0_pred, spdif0_podf, spdif1_pred, spdif1_podf,
spdif0_com_s, spdif1_com_sel, spdif0_gate, spdif1_gate, spdif_ipg_gate,
- clk_max
+ ocram, clk_max
};
static struct clk *clk[clk_max];
@@ -506,6 +506,7 @@
mx53_can_sel, ARRAY_SIZE(mx53_can_sel));
clk[can1_serial_gate] = imx_clk_gate2("can1_serial_gate", "can_sel", MXC_CCM_CCGR6, 22);
clk[can1_ipg_gate] = imx_clk_gate2("can1_ipg_gate", "ipg", MXC_CCM_CCGR6, 20);
+ clk[ocram] = imx_clk_gate2("ocram", "ahb", MXC_CCM_CCGR6, 2);
clk[can2_serial_gate] = imx_clk_gate2("can2_serial_gate", "can_sel", MXC_CCM_CCGR4, 8);
clk[can2_ipg_gate] = imx_clk_gate2("can2_ipg_gate", "ipg", MXC_CCM_CCGR4, 6);
clk[i2c3_gate] = imx_clk_gate2("i2c3_gate", "per_root", MXC_CCM_CCGR1, 22);
diff --git a/arch/arm/mach-imx/clk-imx6q.c b/arch/arm/mach-imx/clk-imx6q.c
index 86567d9..9181a24 100644
--- a/arch/arm/mach-imx/clk-imx6q.c
+++ b/arch/arm/mach-imx/clk-imx6q.c
@@ -206,6 +206,17 @@
static const char *cko1_sels[] = { "pll3_usb_otg", "pll2_bus", "pll1_sys", "pll5_video_div",
"dummy", "axi", "enfc", "ipu1_di0", "ipu1_di1", "ipu2_di0",
"ipu2_di1", "ahb", "ipg", "ipg_per", "ckil", "pll4_post_div", };
+static const char *cko2_sels[] = {
+ "mmdc_ch0_axi", "mmdc_ch1_axi", "usdhc4", "usdhc1",
+ "gpu2d_axi", "dummy", "ecspi_root", "gpu3d_axi",
+ "usdhc3", "dummy", "arm", "ipu1",
+ "ipu2", "vdo_axi", "osc", "gpu2d_core",
+ "gpu3d_core", "usdhc2", "ssi1", "ssi2",
+ "ssi3", "gpu3d_shader", "vpu_axi", "can_root",
+ "ldb_di0", "ldb_di1", "esai", "eim_slow",
+ "uart_serial", "spdif", "asrc", "hsi_tx",
+};
+static const char *cko_sels[] = { "cko1", "cko2", };
enum mx6q_clks {
dummy, ckil, ckih, osc, pll2_pfd0_352m, pll2_pfd1_594m, pll2_pfd2_396m,
@@ -239,7 +250,8 @@
pll4_audio, pll5_video, pll8_mlb, pll7_usb_host, pll6_enet, ssi1_ipg,
ssi2_ipg, ssi3_ipg, rom, usbphy1, usbphy2, ldb_di0_div_3_5, ldb_di1_div_3_5,
sata_ref, sata_ref_100m, pcie_ref, pcie_ref_125m, enet_ref, usbphy1_gate,
- usbphy2_gate, pll4_post_div, pll5_post_div, pll5_video_div, eim_slow, clk_max
+ usbphy2_gate, pll4_post_div, pll5_post_div, pll5_video_div, eim_slow,
+ spdif, cko2_sel, cko2_podf, cko2, cko, vdoa, clk_max
};
static struct clk *clk[clk_max];
@@ -276,6 +288,7 @@
struct device_node *np;
void __iomem *base;
int i, irq;
+ int ret;
clk[dummy] = imx_clk_fixed("dummy", 0);
clk[ckil] = imx_obtain_fixed_clock("ckil", 0);
@@ -384,19 +397,21 @@
clk[ipu2_di1_sel] = imx_clk_mux("ipu2_di1_sel", base + 0x38, 9, 3, ipu2_di1_sels, ARRAY_SIZE(ipu2_di1_sels));
clk[hsi_tx_sel] = imx_clk_mux("hsi_tx_sel", base + 0x30, 28, 1, hsi_tx_sels, ARRAY_SIZE(hsi_tx_sels));
clk[pcie_axi_sel] = imx_clk_mux("pcie_axi_sel", base + 0x18, 10, 1, pcie_axi_sels, ARRAY_SIZE(pcie_axi_sels));
- clk[ssi1_sel] = imx_clk_mux("ssi1_sel", base + 0x1c, 10, 2, ssi_sels, ARRAY_SIZE(ssi_sels));
- clk[ssi2_sel] = imx_clk_mux("ssi2_sel", base + 0x1c, 12, 2, ssi_sels, ARRAY_SIZE(ssi_sels));
- clk[ssi3_sel] = imx_clk_mux("ssi3_sel", base + 0x1c, 14, 2, ssi_sels, ARRAY_SIZE(ssi_sels));
- clk[usdhc1_sel] = imx_clk_mux("usdhc1_sel", base + 0x1c, 16, 1, usdhc_sels, ARRAY_SIZE(usdhc_sels));
- clk[usdhc2_sel] = imx_clk_mux("usdhc2_sel", base + 0x1c, 17, 1, usdhc_sels, ARRAY_SIZE(usdhc_sels));
- clk[usdhc3_sel] = imx_clk_mux("usdhc3_sel", base + 0x1c, 18, 1, usdhc_sels, ARRAY_SIZE(usdhc_sels));
- clk[usdhc4_sel] = imx_clk_mux("usdhc4_sel", base + 0x1c, 19, 1, usdhc_sels, ARRAY_SIZE(usdhc_sels));
+ clk[ssi1_sel] = imx_clk_fixup_mux("ssi1_sel", base + 0x1c, 10, 2, ssi_sels, ARRAY_SIZE(ssi_sels), imx_cscmr1_fixup);
+ clk[ssi2_sel] = imx_clk_fixup_mux("ssi2_sel", base + 0x1c, 12, 2, ssi_sels, ARRAY_SIZE(ssi_sels), imx_cscmr1_fixup);
+ clk[ssi3_sel] = imx_clk_fixup_mux("ssi3_sel", base + 0x1c, 14, 2, ssi_sels, ARRAY_SIZE(ssi_sels), imx_cscmr1_fixup);
+ clk[usdhc1_sel] = imx_clk_fixup_mux("usdhc1_sel", base + 0x1c, 16, 1, usdhc_sels, ARRAY_SIZE(usdhc_sels), imx_cscmr1_fixup);
+ clk[usdhc2_sel] = imx_clk_fixup_mux("usdhc2_sel", base + 0x1c, 17, 1, usdhc_sels, ARRAY_SIZE(usdhc_sels), imx_cscmr1_fixup);
+ clk[usdhc3_sel] = imx_clk_fixup_mux("usdhc3_sel", base + 0x1c, 18, 1, usdhc_sels, ARRAY_SIZE(usdhc_sels), imx_cscmr1_fixup);
+ clk[usdhc4_sel] = imx_clk_fixup_mux("usdhc4_sel", base + 0x1c, 19, 1, usdhc_sels, ARRAY_SIZE(usdhc_sels), imx_cscmr1_fixup);
clk[enfc_sel] = imx_clk_mux("enfc_sel", base + 0x2c, 16, 2, enfc_sels, ARRAY_SIZE(enfc_sels));
- clk[emi_sel] = imx_clk_mux("emi_sel", base + 0x1c, 27, 2, emi_sels, ARRAY_SIZE(emi_sels));
- clk[emi_slow_sel] = imx_clk_mux("emi_slow_sel", base + 0x1c, 29, 2, emi_slow_sels, ARRAY_SIZE(emi_slow_sels));
+ clk[emi_sel] = imx_clk_fixup_mux("emi_sel", base + 0x1c, 27, 2, emi_sels, ARRAY_SIZE(emi_sels), imx_cscmr1_fixup);
+ clk[emi_slow_sel] = imx_clk_fixup_mux("emi_slow_sel", base + 0x1c, 29, 2, emi_slow_sels, ARRAY_SIZE(emi_slow_sels), imx_cscmr1_fixup);
clk[vdo_axi_sel] = imx_clk_mux("vdo_axi_sel", base + 0x18, 11, 1, vdo_axi_sels, ARRAY_SIZE(vdo_axi_sels));
clk[vpu_axi_sel] = imx_clk_mux("vpu_axi_sel", base + 0x18, 14, 2, vpu_axi_sels, ARRAY_SIZE(vpu_axi_sels));
clk[cko1_sel] = imx_clk_mux("cko1_sel", base + 0x60, 0, 4, cko1_sels, ARRAY_SIZE(cko1_sels));
+ clk[cko2_sel] = imx_clk_mux("cko2_sel", base + 0x60, 16, 5, cko2_sels, ARRAY_SIZE(cko2_sels));
+ clk[cko] = imx_clk_mux("cko", base + 0x60, 8, 1, cko_sels, ARRAY_SIZE(cko_sels));
/* name reg shift width busy: reg, shift parent_names num_parents */
clk[periph] = imx_clk_busy_mux("periph", base + 0x14, 25, 1, base + 0x48, 5, periph_sels, ARRAY_SIZE(periph_sels));
@@ -406,7 +421,7 @@
clk[periph_clk2] = imx_clk_divider("periph_clk2", "periph_clk2_sel", base + 0x14, 27, 3);
clk[periph2_clk2] = imx_clk_divider("periph2_clk2", "periph2_clk2_sel", base + 0x14, 0, 3);
clk[ipg] = imx_clk_divider("ipg", "ahb", base + 0x14, 8, 2);
- clk[ipg_per] = imx_clk_divider("ipg_per", "ipg", base + 0x1c, 0, 6);
+ clk[ipg_per] = imx_clk_fixup_divider("ipg_per", "ipg", base + 0x1c, 0, 6, imx_cscmr1_fixup);
clk[esai_pred] = imx_clk_divider("esai_pred", "esai_sel", base + 0x28, 9, 3);
clk[esai_podf] = imx_clk_divider("esai_podf", "esai_pred", base + 0x28, 25, 3);
clk[asrc_pred] = imx_clk_divider("asrc_pred", "asrc_sel", base + 0x30, 12, 3);
@@ -442,10 +457,11 @@
clk[usdhc4_podf] = imx_clk_divider("usdhc4_podf", "usdhc4_sel", base + 0x24, 22, 3);
clk[enfc_pred] = imx_clk_divider("enfc_pred", "enfc_sel", base + 0x2c, 18, 3);
clk[enfc_podf] = imx_clk_divider("enfc_podf", "enfc_pred", base + 0x2c, 21, 6);
- clk[emi_podf] = imx_clk_divider("emi_podf", "emi_sel", base + 0x1c, 20, 3);
- clk[emi_slow_podf] = imx_clk_divider("emi_slow_podf", "emi_slow_sel", base + 0x1c, 23, 3);
+ clk[emi_podf] = imx_clk_fixup_divider("emi_podf", "emi_sel", base + 0x1c, 20, 3, imx_cscmr1_fixup);
+ clk[emi_slow_podf] = imx_clk_fixup_divider("emi_slow_podf", "emi_slow_sel", base + 0x1c, 23, 3, imx_cscmr1_fixup);
clk[vpu_axi_podf] = imx_clk_divider("vpu_axi_podf", "vpu_axi_sel", base + 0x24, 25, 3);
clk[cko1_podf] = imx_clk_divider("cko1_podf", "cko1_sel", base + 0x60, 4, 3);
+ clk[cko2_podf] = imx_clk_divider("cko2_podf", "cko2_sel", base + 0x60, 21, 3);
/* name parent_name reg shift width busy: reg, shift */
clk[axi] = imx_clk_busy_divider("axi", "axi_sel", base + 0x14, 16, 3, base + 0x48, 0);
@@ -486,6 +502,7 @@
clk[i2c3] = imx_clk_gate2("i2c3", "ipg_per", base + 0x70, 10);
clk[iim] = imx_clk_gate2("iim", "ipg", base + 0x70, 12);
clk[enfc] = imx_clk_gate2("enfc", "enfc_podf", base + 0x70, 14);
+ clk[vdoa] = imx_clk_gate2("vdoa", "vdo_axi", base + 0x70, 26);
clk[ipu1] = imx_clk_gate2("ipu1", "ipu1_podf", base + 0x74, 0);
clk[ipu1_di0] = imx_clk_gate2("ipu1_di0", "ipu1_di0_sel", base + 0x74, 2);
clk[ipu1_di1] = imx_clk_gate2("ipu1_di1", "ipu1_di1_sel", base + 0x74, 4);
@@ -521,6 +538,7 @@
clk[sata] = imx_clk_gate2("sata", "ipg", base + 0x7c, 4);
clk[sdma] = imx_clk_gate2("sdma", "ahb", base + 0x7c, 6);
clk[spba] = imx_clk_gate2("spba", "ipg", base + 0x7c, 12);
+ clk[spdif] = imx_clk_gate2("spdif", "spdif_podf", base + 0x7c, 14);
clk[ssi1_ipg] = imx_clk_gate2("ssi1_ipg", "ipg", base + 0x7c, 18);
clk[ssi2_ipg] = imx_clk_gate2("ssi2_ipg", "ipg", base + 0x7c, 20);
clk[ssi3_ipg] = imx_clk_gate2("ssi3_ipg", "ipg", base + 0x7c, 22);
@@ -535,6 +553,7 @@
clk[vdo_axi] = imx_clk_gate2("vdo_axi", "vdo_axi_sel", base + 0x80, 12);
clk[vpu_axi] = imx_clk_gate2("vpu_axi", "vpu_axi_podf", base + 0x80, 14);
clk[cko1] = imx_clk_gate("cko1", "cko1_podf", base + 0x60, 7);
+ clk[cko2] = imx_clk_gate("cko2", "cko2_podf", base + 0x60, 24);
for (i = 0; i < ARRAY_SIZE(clk); i++)
if (IS_ERR(clk[i]))
@@ -554,7 +573,7 @@
clk_register_clkdev(clk[pll4_post_div], "pll4_post_div", NULL);
clk_register_clkdev(clk[pll4_audio], "pll4_audio", NULL);
- if (imx6q_revision() != IMX_CHIP_REVISION_1_0) {
+ if ((imx6q_revision() != IMX_CHIP_REVISION_1_0) || cpu_is_imx6dl()) {
clk_set_parent(clk[ldb_di0_sel], clk[pll5_video_div]);
clk_set_parent(clk[ldb_di1_sel], clk[pll5_video_div]);
}
@@ -574,6 +593,16 @@
clk_prepare_enable(clk[usbphy2_gate]);
}
+ /*
+ * Let's initially set up CLKO with OSC24M, since this configuration
+ * is widely used by imx6q board designs to clock audio codec.
+ */
+ ret = clk_set_parent(clk[cko2_sel], clk[osc]);
+ if (!ret)
+ ret = clk_set_parent(clk[cko], clk[cko2]);
+ if (ret)
+ pr_warn("failed to set up CLKO: %d\n", ret);
+
/* Set initial power mode */
imx6q_set_lpm(WAIT_CLOCKED);
diff --git a/arch/arm/mach-imx/clk-imx6sl.c b/arch/arm/mach-imx/clk-imx6sl.c
index a307ac2..a5c3c5d 100644
--- a/arch/arm/mach-imx/clk-imx6sl.c
+++ b/arch/arm/mach-imx/clk-imx6sl.c
@@ -138,14 +138,14 @@
clks[IMX6SL_CLK_PERIPH_CLK2_SEL] = imx_clk_mux("periph_clk2_sel", base + 0x18, 12, 2, periph_clk2_sels, ARRAY_SIZE(periph_clk2_sels));
clks[IMX6SL_CLK_CSI_SEL] = imx_clk_mux("csi_sel", base + 0x3c, 9, 2, csi_lcdif_sels, ARRAY_SIZE(csi_lcdif_sels));
clks[IMX6SL_CLK_LCDIF_AXI_SEL] = imx_clk_mux("lcdif_axi_sel", base + 0x3c, 14, 2, csi_lcdif_sels, ARRAY_SIZE(csi_lcdif_sels));
- clks[IMX6SL_CLK_USDHC1_SEL] = imx_clk_mux("usdhc1_sel", base + 0x1c, 16, 1, usdhc_sels, ARRAY_SIZE(usdhc_sels));
- clks[IMX6SL_CLK_USDHC2_SEL] = imx_clk_mux("usdhc2_sel", base + 0x1c, 17, 1, usdhc_sels, ARRAY_SIZE(usdhc_sels));
- clks[IMX6SL_CLK_USDHC3_SEL] = imx_clk_mux("usdhc3_sel", base + 0x1c, 18, 1, usdhc_sels, ARRAY_SIZE(usdhc_sels));
- clks[IMX6SL_CLK_USDHC4_SEL] = imx_clk_mux("usdhc4_sel", base + 0x1c, 19, 1, usdhc_sels, ARRAY_SIZE(usdhc_sels));
- clks[IMX6SL_CLK_SSI1_SEL] = imx_clk_mux("ssi1_sel", base + 0x1c, 10, 2, ssi_sels, ARRAY_SIZE(ssi_sels));
- clks[IMX6SL_CLK_SSI2_SEL] = imx_clk_mux("ssi2_sel", base + 0x1c, 12, 2, ssi_sels, ARRAY_SIZE(ssi_sels));
- clks[IMX6SL_CLK_SSI3_SEL] = imx_clk_mux("ssi3_sel", base + 0x1c, 14, 2, ssi_sels, ARRAY_SIZE(ssi_sels));
- clks[IMX6SL_CLK_PERCLK_SEL] = imx_clk_mux("perclk_sel", base + 0x1c, 6, 1, perclk_sels, ARRAY_SIZE(perclk_sels));
+ clks[IMX6SL_CLK_USDHC1_SEL] = imx_clk_fixup_mux("usdhc1_sel", base + 0x1c, 16, 1, usdhc_sels, ARRAY_SIZE(usdhc_sels), imx_cscmr1_fixup);
+ clks[IMX6SL_CLK_USDHC2_SEL] = imx_clk_fixup_mux("usdhc2_sel", base + 0x1c, 17, 1, usdhc_sels, ARRAY_SIZE(usdhc_sels), imx_cscmr1_fixup);
+ clks[IMX6SL_CLK_USDHC3_SEL] = imx_clk_fixup_mux("usdhc3_sel", base + 0x1c, 18, 1, usdhc_sels, ARRAY_SIZE(usdhc_sels), imx_cscmr1_fixup);
+ clks[IMX6SL_CLK_USDHC4_SEL] = imx_clk_fixup_mux("usdhc4_sel", base + 0x1c, 19, 1, usdhc_sels, ARRAY_SIZE(usdhc_sels), imx_cscmr1_fixup);
+ clks[IMX6SL_CLK_SSI1_SEL] = imx_clk_fixup_mux("ssi1_sel", base + 0x1c, 10, 2, ssi_sels, ARRAY_SIZE(ssi_sels), imx_cscmr1_fixup);
+ clks[IMX6SL_CLK_SSI2_SEL] = imx_clk_fixup_mux("ssi2_sel", base + 0x1c, 12, 2, ssi_sels, ARRAY_SIZE(ssi_sels), imx_cscmr1_fixup);
+ clks[IMX6SL_CLK_SSI3_SEL] = imx_clk_fixup_mux("ssi3_sel", base + 0x1c, 14, 2, ssi_sels, ARRAY_SIZE(ssi_sels), imx_cscmr1_fixup);
+ clks[IMX6SL_CLK_PERCLK_SEL] = imx_clk_fixup_mux("perclk_sel", base + 0x1c, 6, 1, perclk_sels, ARRAY_SIZE(perclk_sels), imx_cscmr1_fixup);
clks[IMX6SL_CLK_PXP_AXI_SEL] = imx_clk_mux("pxp_axi_sel", base + 0x34, 6, 3, epdc_pxp_sels, ARRAY_SIZE(epdc_pxp_sels));
clks[IMX6SL_CLK_EPDC_AXI_SEL] = imx_clk_mux("epdc_axi_sel", base + 0x34, 15, 3, epdc_pxp_sels, ARRAY_SIZE(epdc_pxp_sels));
clks[IMX6SL_CLK_GPU2D_OVG_SEL] = imx_clk_mux("gpu2d_ovg_sel", base + 0x18, 4, 2, gpu2d_ovg_sels, ARRAY_SIZE(gpu2d_ovg_sels));
@@ -179,14 +179,14 @@
clks[IMX6SL_CLK_SSI2_PODF] = imx_clk_divider("ssi2_podf", "ssi2_pred", base + 0x2c, 0, 6);
clks[IMX6SL_CLK_SSI3_PRED] = imx_clk_divider("ssi3_pred", "ssi3_sel", base + 0x28, 22, 3);
clks[IMX6SL_CLK_SSI3_PODF] = imx_clk_divider("ssi3_podf", "ssi3_pred", base + 0x28, 16, 6);
- clks[IMX6SL_CLK_PERCLK] = imx_clk_divider("perclk", "perclk_sel", base + 0x1c, 0, 6);
+ clks[IMX6SL_CLK_PERCLK] = imx_clk_fixup_divider("perclk", "perclk_sel", base + 0x1c, 0, 6, imx_cscmr1_fixup);
clks[IMX6SL_CLK_PXP_AXI_PODF] = imx_clk_divider("pxp_axi_podf", "pxp_axi_sel", base + 0x34, 3, 3);
clks[IMX6SL_CLK_EPDC_AXI_PODF] = imx_clk_divider("epdc_axi_podf", "epdc_axi_sel", base + 0x34, 12, 3);
clks[IMX6SL_CLK_GPU2D_OVG_PODF] = imx_clk_divider("gpu2d_ovg_podf", "gpu2d_ovg_sel", base + 0x18, 26, 3);
clks[IMX6SL_CLK_GPU2D_PODF] = imx_clk_divider("gpu2d_podf", "gpu2d_sel", base + 0x18, 29, 3);
clks[IMX6SL_CLK_LCDIF_PIX_PRED] = imx_clk_divider("lcdif_pix_pred", "lcdif_pix_sel", base + 0x38, 3, 3);
clks[IMX6SL_CLK_EPDC_PIX_PRED] = imx_clk_divider("epdc_pix_pred", "epdc_pix_sel", base + 0x38, 12, 3);
- clks[IMX6SL_CLK_LCDIF_PIX_PODF] = imx_clk_divider("lcdif_pix_podf", "lcdif_pix_pred", base + 0x1c, 20, 3);
+ clks[IMX6SL_CLK_LCDIF_PIX_PODF] = imx_clk_fixup_divider("lcdif_pix_podf", "lcdif_pix_pred", base + 0x1c, 20, 3, imx_cscmr1_fixup);
clks[IMX6SL_CLK_EPDC_PIX_PODF] = imx_clk_divider("epdc_pix_podf", "epdc_pix_pred", base + 0x18, 23, 3);
clks[IMX6SL_CLK_SPDIF0_PRED] = imx_clk_divider("spdif0_pred", "spdif0_sel", base + 0x30, 25, 3);
clks[IMX6SL_CLK_SPDIF0_PODF] = imx_clk_divider("spdif0_podf", "spdif0_pred", base + 0x30, 22, 3);
diff --git a/arch/arm/mach-imx/clk-pllv3.c b/arch/arm/mach-imx/clk-pllv3.c
index a9fad5f..f6640b6 100644
--- a/arch/arm/mach-imx/clk-pllv3.c
+++ b/arch/arm/mach-imx/clk-pllv3.c
@@ -48,7 +48,7 @@
static int clk_pllv3_prepare(struct clk_hw *hw)
{
struct clk_pllv3 *pll = to_clk_pllv3(hw);
- unsigned long timeout = jiffies + msecs_to_jiffies(10);
+ unsigned long timeout;
u32 val;
val = readl_relaxed(pll->base);
@@ -59,12 +59,19 @@
val &= ~BM_PLL_POWER;
writel_relaxed(val, pll->base);
+ timeout = jiffies + msecs_to_jiffies(10);
/* Wait for PLL to lock */
- while (!(readl_relaxed(pll->base) & BM_PLL_LOCK))
+ do {
+ if (readl_relaxed(pll->base) & BM_PLL_LOCK)
+ break;
if (time_after(jiffies, timeout))
- return -ETIMEDOUT;
+ break;
+ } while (1);
- return 0;
+ if (readl_relaxed(pll->base) & BM_PLL_LOCK)
+ return 0;
+ else
+ return -ETIMEDOUT;
}
static void clk_pllv3_unprepare(struct clk_hw *hw)
diff --git a/arch/arm/mach-imx/clk.c b/arch/arm/mach-imx/clk.c
index 55bc80a..edc35df 100644
--- a/arch/arm/mach-imx/clk.c
+++ b/arch/arm/mach-imx/clk.c
@@ -37,3 +37,29 @@
clk = imx_clk_fixed(name, rate);
return clk;
}
+
+/*
+ * This fixups the register CCM_CSCMR1 write value.
+ * The write/read/divider values of the aclk_podf field
+ * of that register have the relationship described by
+ * the following table:
+ *
+ * write value read value divider
+ * 3b'000 3b'110 7
+ * 3b'001 3b'111 8
+ * 3b'010 3b'100 5
+ * 3b'011 3b'101 6
+ * 3b'100 3b'010 3
+ * 3b'101 3b'011 4
+ * 3b'110 3b'000 1
+ * 3b'111 3b'001 2(default)
+ *
+ * That's why we do the xor operation below.
+ */
+#define CSCMR1_FIXUP 0x00600000
+
+void imx_cscmr1_fixup(u32 *val)
+{
+ *val ^= CSCMR1_FIXUP;
+ return;
+}
diff --git a/arch/arm/mach-imx/clk.h b/arch/arm/mach-imx/clk.h
index 0e4e8bb..3451f1f 100644
--- a/arch/arm/mach-imx/clk.h
+++ b/arch/arm/mach-imx/clk.h
@@ -6,6 +6,8 @@
extern spinlock_t imx_ccm_lock;
+extern void imx_cscmr1_fixup(u32 *val);
+
struct clk *imx_clk_pllv1(const char *name, const char *parent,
void __iomem *base);
@@ -49,6 +51,14 @@
u8 width, void __iomem *busy_reg, u8 busy_shift,
const char **parent_names, int num_parents);
+struct clk *imx_clk_fixup_divider(const char *name, const char *parent,
+ void __iomem *reg, u8 shift, u8 width,
+ void (*fixup)(u32 *val));
+
+struct clk *imx_clk_fixup_mux(const char *name, void __iomem *reg,
+ u8 shift, u8 width, const char **parents,
+ int num_parents, void (*fixup)(u32 *val));
+
static inline struct clk *imx_clk_fixed(const char *name, int rate)
{
return clk_register_fixed_rate(NULL, name, NULL, CLK_IS_ROOT, rate);
diff --git a/arch/arm/mach-imx/common.h b/arch/arm/mach-imx/common.h
index cb6c838..4517fd7 100644
--- a/arch/arm/mach-imx/common.h
+++ b/arch/arm/mach-imx/common.h
@@ -137,7 +137,6 @@
extern void imx_anatop_init(void);
extern void imx_anatop_pre_suspend(void);
extern void imx_anatop_post_resume(void);
-extern void imx_anatop_usb_chrg_detect_disable(void);
extern u32 imx_anatop_get_digprog(void);
extern int imx6q_set_lpm(enum mxc_cpu_pwr_mode mode);
extern void imx6q_set_chicken_bit(void);
@@ -147,12 +146,10 @@
#ifdef CONFIG_PM
extern void imx6q_pm_init(void);
-extern void imx51_pm_init(void);
-extern void imx53_pm_init(void);
+extern void imx5_pm_init(void);
#else
static inline void imx6q_pm_init(void) {}
-static inline void imx51_pm_init(void) {}
-static inline void imx53_pm_init(void) {}
+static inline void imx5_pm_init(void) {}
#endif
#ifdef CONFIG_NEON
@@ -161,6 +158,12 @@
static inline int mx51_neon_fixup(void) { return 0; }
#endif
+#ifdef CONFIG_CACHE_L2X0
+extern void imx_init_l2cache(void);
+#else
+static inline void imx_init_l2cache(void) {}
+#endif
+
extern struct smp_operations imx_smp_ops;
#endif
diff --git a/arch/arm/mach-imx/mach-imx6q.c b/arch/arm/mach-imx/mach-imx6q.c
index a02f275..85a1b51 100644
--- a/arch/arm/mach-imx/mach-imx6q.c
+++ b/arch/arm/mach-imx/mach-imx6q.c
@@ -31,7 +31,7 @@
#include <linux/regmap.h>
#include <linux/micrel_phy.h>
#include <linux/mfd/syscon.h>
-#include <asm/hardware/cache-l2x0.h>
+#include <linux/mfd/syscon/imx6q-iomuxc-gpr.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/system_misc.h>
@@ -103,87 +103,77 @@
{
if (IS_BUILTIN(CONFIG_PHYLIB)) {
/* min rx data delay */
- phy_write(phydev, 0x0b, 0x8105);
- phy_write(phydev, 0x0c, 0x0000);
+ phy_write(phydev, MICREL_KSZ9021_EXTREG_CTRL,
+ 0x8000 | MICREL_KSZ9021_RGMII_RX_DATA_PAD_SCEW);
+ phy_write(phydev, MICREL_KSZ9021_EXTREG_DATA_WRITE, 0x0000);
/* max rx/tx clock delay, min rx/tx control delay */
- phy_write(phydev, 0x0b, 0x8104);
- phy_write(phydev, 0x0c, 0xf0f0);
- phy_write(phydev, 0x0b, 0x104);
+ phy_write(phydev, MICREL_KSZ9021_EXTREG_CTRL,
+ 0x8000 | MICREL_KSZ9021_RGMII_CLK_CTRL_PAD_SCEW);
+ phy_write(phydev, MICREL_KSZ9021_EXTREG_DATA_WRITE, 0xf0f0);
+ phy_write(phydev, MICREL_KSZ9021_EXTREG_CTRL,
+ MICREL_KSZ9021_RGMII_CLK_CTRL_PAD_SCEW);
}
return 0;
}
-static void __init imx6q_sabrelite_cko1_setup(void)
+static void mmd_write_reg(struct phy_device *dev, int device, int reg, int val)
{
- struct clk *cko1_sel, *ahb, *cko1;
- unsigned long rate;
-
- cko1_sel = clk_get_sys(NULL, "cko1_sel");
- ahb = clk_get_sys(NULL, "ahb");
- cko1 = clk_get_sys(NULL, "cko1");
- if (IS_ERR(cko1_sel) || IS_ERR(ahb) || IS_ERR(cko1)) {
- pr_err("cko1 setup failed!\n");
- goto put_clk;
- }
- clk_set_parent(cko1_sel, ahb);
- rate = clk_round_rate(cko1, 16000000);
- clk_set_rate(cko1, rate);
-put_clk:
- if (!IS_ERR(cko1_sel))
- clk_put(cko1_sel);
- if (!IS_ERR(ahb))
- clk_put(ahb);
- if (!IS_ERR(cko1))
- clk_put(cko1);
+ phy_write(dev, 0x0d, device);
+ phy_write(dev, 0x0e, reg);
+ phy_write(dev, 0x0d, (1 << 14) | device);
+ phy_write(dev, 0x0e, val);
}
-static void __init imx6q_sabrelite_init(void)
+static int ksz9031rn_phy_fixup(struct phy_device *dev)
{
- if (IS_BUILTIN(CONFIG_PHYLIB))
+ /*
+ * min rx data delay, max rx/tx clock delay,
+ * min rx/tx control delay
+ */
+ mmd_write_reg(dev, 2, 4, 0);
+ mmd_write_reg(dev, 2, 5, 0);
+ mmd_write_reg(dev, 2, 8, 0x003ff);
+
+ return 0;
+}
+
+static int ar8031_phy_fixup(struct phy_device *dev)
+{
+ u16 val;
+
+ /* To enable AR8031 output a 125MHz clk from CLK_25M */
+ phy_write(dev, 0xd, 0x7);
+ phy_write(dev, 0xe, 0x8016);
+ phy_write(dev, 0xd, 0x4007);
+
+ val = phy_read(dev, 0xe);
+ val &= 0xffe3;
+ val |= 0x18;
+ phy_write(dev, 0xe, val);
+
+ /* introduce tx clock delay */
+ phy_write(dev, 0x1d, 0x5);
+ val = phy_read(dev, 0x1e);
+ val |= 0x0100;
+ phy_write(dev, 0x1e, val);
+
+ return 0;
+}
+
+#define PHY_ID_AR8031 0x004dd074
+
+static void __init imx6q_enet_phy_init(void)
+{
+ if (IS_BUILTIN(CONFIG_PHYLIB)) {
phy_register_fixup_for_uid(PHY_ID_KSZ9021, MICREL_PHY_ID_MASK,
ksz9021rn_phy_fixup);
- imx6q_sabrelite_cko1_setup();
-}
-
-static void __init imx6q_sabresd_cko1_setup(void)
-{
- struct clk *cko1_sel, *pll4, *pll4_post, *cko1;
- unsigned long rate;
-
- cko1_sel = clk_get_sys(NULL, "cko1_sel");
- pll4 = clk_get_sys(NULL, "pll4_audio");
- pll4_post = clk_get_sys(NULL, "pll4_post_div");
- cko1 = clk_get_sys(NULL, "cko1");
- if (IS_ERR(cko1_sel) || IS_ERR(pll4)
- || IS_ERR(pll4_post) || IS_ERR(cko1)) {
- pr_err("cko1 setup failed!\n");
- goto put_clk;
+ phy_register_fixup_for_uid(PHY_ID_KSZ9031, MICREL_PHY_ID_MASK,
+ ksz9031rn_phy_fixup);
+ phy_register_fixup_for_uid(PHY_ID_AR8031, 0xffffffff,
+ ar8031_phy_fixup);
}
- /*
- * Setting pll4 at 768MHz (24MHz * 32)
- * So its child clock can get 24MHz easily
- */
- clk_set_rate(pll4, 768000000);
-
- clk_set_parent(cko1_sel, pll4_post);
- rate = clk_round_rate(cko1, 24000000);
- clk_set_rate(cko1, rate);
-put_clk:
- if (!IS_ERR(cko1_sel))
- clk_put(cko1_sel);
- if (!IS_ERR(pll4_post))
- clk_put(pll4_post);
- if (!IS_ERR(pll4))
- clk_put(pll4);
- if (!IS_ERR(cko1))
- clk_put(cko1);
-}
-
-static void __init imx6q_sabresd_init(void)
-{
- imx6q_sabresd_cko1_setup();
}
static void __init imx6q_1588_init(void)
@@ -192,29 +182,22 @@
gpr = syscon_regmap_lookup_by_compatible("fsl,imx6q-iomuxc-gpr");
if (!IS_ERR(gpr))
- regmap_update_bits(gpr, 0x4, 1 << 21, 1 << 21);
+ regmap_update_bits(gpr, IOMUXC_GPR1,
+ IMX6Q_GPR1_ENET_CLK_SEL_MASK,
+ IMX6Q_GPR1_ENET_CLK_SEL_ANATOP);
else
pr_err("failed to find fsl,imx6q-iomux-gpr regmap\n");
}
-static void __init imx6q_usb_init(void)
-{
- imx_anatop_usb_chrg_detect_disable();
-}
static void __init imx6q_init_machine(void)
{
- if (of_machine_is_compatible("fsl,imx6q-sabrelite"))
- imx6q_sabrelite_init();
- else if (of_machine_is_compatible("fsl,imx6q-sabresd") ||
- of_machine_is_compatible("fsl,imx6dl-sabresd"))
- imx6q_sabresd_init();
+ imx6q_enet_phy_init();
of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
imx_anatop_init();
imx6q_pm_init();
- imx6q_usb_init();
imx6q_1588_init();
}
@@ -296,44 +279,10 @@
imx_scu_map_io();
}
-#ifdef CONFIG_CACHE_L2X0
-static void __init imx6q_init_l2cache(void)
-{
- void __iomem *l2x0_base;
- struct device_node *np;
- unsigned int val;
-
- np = of_find_compatible_node(NULL, NULL, "arm,pl310-cache");
- if (!np)
- goto out;
-
- l2x0_base = of_iomap(np, 0);
- if (!l2x0_base) {
- of_node_put(np);
- goto out;
- }
-
- /* Configure the L2 PREFETCH and POWER registers */
- val = readl_relaxed(l2x0_base + L2X0_PREFETCH_CTRL);
- val |= 0x70800000;
- writel_relaxed(val, l2x0_base + L2X0_PREFETCH_CTRL);
- val = L2X0_DYNAMIC_CLK_GATING_EN | L2X0_STNDBY_MODE_EN;
- writel_relaxed(val, l2x0_base + L2X0_POWER_CTRL);
-
- iounmap(l2x0_base);
- of_node_put(np);
-
-out:
- l2x0_of_init(0, ~0UL);
-}
-#else
-static inline void imx6q_init_l2cache(void) {}
-#endif
-
static void __init imx6q_init_irq(void)
{
imx6q_init_revision();
- imx6q_init_l2cache();
+ imx_init_l2cache();
imx_src_init();
imx_gpc_init();
irqchip_init();
diff --git a/arch/arm/mach-imx/mach-imx6sl.c b/arch/arm/mach-imx/mach-imx6sl.c
index 132db26..0d75dc5 100644
--- a/arch/arm/mach-imx/mach-imx6sl.c
+++ b/arch/arm/mach-imx/mach-imx6sl.c
@@ -11,7 +11,6 @@
#include <linux/irqchip.h>
#include <linux/of.h>
#include <linux/of_platform.h>
-#include <asm/hardware/cache-l2x0.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
@@ -26,7 +25,7 @@
static void __init imx6sl_init_irq(void)
{
- l2x0_of_init(0, ~0UL);
+ imx_init_l2cache();
imx_src_init();
imx_gpc_init();
irqchip_init();
diff --git a/arch/arm/mach-imx/mm-imx5.c b/arch/arm/mach-imx/mm-imx5.c
index cf193d8..a8229b7 100644
--- a/arch/arm/mach-imx/mm-imx5.c
+++ b/arch/arm/mach-imx/mm-imx5.c
@@ -153,10 +153,10 @@
void __init imx51_init_late(void)
{
mx51_neon_fixup();
- imx51_pm_init();
+ imx5_pm_init();
}
void __init imx53_init_late(void)
{
- imx53_pm_init();
+ imx5_pm_init();
}
diff --git a/arch/arm/mach-imx/pm-imx5.c b/arch/arm/mach-imx/pm-imx5.c
index 82e79c6..58aeaf5 100644
--- a/arch/arm/mach-imx/pm-imx5.c
+++ b/arch/arm/mach-imx/pm-imx5.c
@@ -169,14 +169,9 @@
return imx5_cpuidle_init();
}
-void __init imx51_pm_init(void)
+void __init imx5_pm_init(void)
{
int ret = imx5_pm_common_init();
if (!ret)
suspend_set_ops(&mx5_suspend_ops);
}
-
-void __init imx53_pm_init(void)
-{
- imx5_pm_common_init();
-}
diff --git a/arch/arm/mach-imx/system.c b/arch/arm/mach-imx/system.c
index 6fe81bb..64ff37e 100644
--- a/arch/arm/mach-imx/system.c
+++ b/arch/arm/mach-imx/system.c
@@ -27,6 +27,7 @@
#include <asm/system_misc.h>
#include <asm/proc-fns.h>
#include <asm/mach-types.h>
+#include <asm/hardware/cache-l2x0.h>
#include "common.h"
#include "hardware.h"
@@ -95,3 +96,35 @@
clk_prepare(wdog_clk);
}
+
+#ifdef CONFIG_CACHE_L2X0
+void __init imx_init_l2cache(void)
+{
+ void __iomem *l2x0_base;
+ struct device_node *np;
+ unsigned int val;
+
+ np = of_find_compatible_node(NULL, NULL, "arm,pl310-cache");
+ if (!np)
+ goto out;
+
+ l2x0_base = of_iomap(np, 0);
+ if (!l2x0_base) {
+ of_node_put(np);
+ goto out;
+ }
+
+ /* Configure the L2 PREFETCH and POWER registers */
+ val = readl_relaxed(l2x0_base + L2X0_PREFETCH_CTRL);
+ val |= 0x70800000;
+ writel_relaxed(val, l2x0_base + L2X0_PREFETCH_CTRL);
+ val = L2X0_DYNAMIC_CLK_GATING_EN | L2X0_STNDBY_MODE_EN;
+ writel_relaxed(val, l2x0_base + L2X0_POWER_CTRL);
+
+ iounmap(l2x0_base);
+ of_node_put(np);
+
+out:
+ l2x0_of_init(0, ~0UL);
+}
+#endif
diff --git a/arch/arm/mach-kirkwood/board-dt.c b/arch/arm/mach-kirkwood/board-dt.c
index 6e122ed..682b7ac 100644
--- a/arch/arm/mach-kirkwood/board-dt.c
+++ b/arch/arm/mach-kirkwood/board-dt.c
@@ -87,6 +87,7 @@
*/
writel(readl(CPU_CONFIG) & ~CPU_CONFIG_ERROR_PROP, CPU_CONFIG);
+ BUG_ON(mvebu_mbus_dt_init());
kirkwood_setup_wins();
kirkwood_l2_init();
diff --git a/arch/arm/mach-kirkwood/common.c b/arch/arm/mach-kirkwood/common.c
index 1663de0..1767611 100644
--- a/arch/arm/mach-kirkwood/common.c
+++ b/arch/arm/mach-kirkwood/common.c
@@ -37,6 +37,12 @@
#include <linux/platform_data/dma-mv_xor.h>
#include "common.h"
+/* These can go away once Kirkwood uses the mvebu-mbus DT binding */
+#define KIRKWOOD_MBUS_NAND_TARGET 0x01
+#define KIRKWOOD_MBUS_NAND_ATTR 0x2f
+#define KIRKWOOD_MBUS_SRAM_TARGET 0x03
+#define KIRKWOOD_MBUS_SRAM_ATTR 0x01
+
/*****************************************************************************
* I/O Address Mapping
****************************************************************************/
@@ -528,10 +534,6 @@
void __init kirkwood_init_early(void)
{
orion_time_set_base(TIMER_VIRT_BASE);
-
- mvebu_mbus_init("marvell,kirkwood-mbus",
- BRIDGE_WINS_BASE, BRIDGE_WINS_SZ,
- DDR_WINDOW_CPU_BASE, DDR_WINDOW_CPU_SZ);
}
int kirkwood_tclk;
@@ -666,10 +668,14 @@
void __init kirkwood_setup_wins(void)
{
- mvebu_mbus_add_window("nand", KIRKWOOD_NAND_MEM_PHYS_BASE,
- KIRKWOOD_NAND_MEM_SIZE);
- mvebu_mbus_add_window("sram", KIRKWOOD_SRAM_PHYS_BASE,
- KIRKWOOD_SRAM_SIZE);
+ mvebu_mbus_add_window_by_id(KIRKWOOD_MBUS_NAND_TARGET,
+ KIRKWOOD_MBUS_NAND_ATTR,
+ KIRKWOOD_NAND_MEM_PHYS_BASE,
+ KIRKWOOD_NAND_MEM_SIZE);
+ mvebu_mbus_add_window_by_id(KIRKWOOD_MBUS_SRAM_TARGET,
+ KIRKWOOD_MBUS_SRAM_ATTR,
+ KIRKWOOD_SRAM_PHYS_BASE,
+ KIRKWOOD_SRAM_SIZE);
}
void __init kirkwood_l2_init(void)
@@ -697,6 +703,10 @@
*/
writel(readl(CPU_CONFIG) & ~CPU_CONFIG_ERROR_PROP, CPU_CONFIG);
+ BUG_ON(mvebu_mbus_init("marvell,kirkwood-mbus",
+ BRIDGE_WINS_BASE, BRIDGE_WINS_SZ,
+ DDR_WINDOW_CPU_BASE, DDR_WINDOW_CPU_SZ));
+
kirkwood_setup_wins();
kirkwood_l2_init();
diff --git a/arch/arm/mach-kirkwood/pcie.c b/arch/arm/mach-kirkwood/pcie.c
index ddcb09f..12d86f3 100644
--- a/arch/arm/mach-kirkwood/pcie.c
+++ b/arch/arm/mach-kirkwood/pcie.c
@@ -20,6 +20,16 @@
#include <mach/bridge-regs.h>
#include "common.h"
+/* These can go away once Kirkwood uses the mvebu-mbus DT binding */
+#define KIRKWOOD_MBUS_PCIE0_MEM_TARGET 0x4
+#define KIRKWOOD_MBUS_PCIE0_MEM_ATTR 0xe8
+#define KIRKWOOD_MBUS_PCIE0_IO_TARGET 0x4
+#define KIRKWOOD_MBUS_PCIE0_IO_ATTR 0xe0
+#define KIRKWOOD_MBUS_PCIE1_MEM_TARGET 0x4
+#define KIRKWOOD_MBUS_PCIE1_MEM_ATTR 0xd8
+#define KIRKWOOD_MBUS_PCIE1_IO_TARGET 0x4
+#define KIRKWOOD_MBUS_PCIE1_IO_ATTR 0xd0
+
static void kirkwood_enable_pcie_clk(const char *port)
{
struct clk *clk;
@@ -254,26 +264,24 @@
void __init kirkwood_pcie_init(unsigned int portmask)
{
- mvebu_mbus_add_window_remap_flags("pcie0.0",
+ mvebu_mbus_add_window_remap_by_id(KIRKWOOD_MBUS_PCIE0_IO_TARGET,
+ KIRKWOOD_MBUS_PCIE0_IO_ATTR,
KIRKWOOD_PCIE_IO_PHYS_BASE,
KIRKWOOD_PCIE_IO_SIZE,
- KIRKWOOD_PCIE_IO_BUS_BASE,
- MVEBU_MBUS_PCI_IO);
- mvebu_mbus_add_window_remap_flags("pcie0.0",
- KIRKWOOD_PCIE_MEM_PHYS_BASE,
- KIRKWOOD_PCIE_MEM_SIZE,
- MVEBU_MBUS_NO_REMAP,
- MVEBU_MBUS_PCI_MEM);
- mvebu_mbus_add_window_remap_flags("pcie1.0",
+ KIRKWOOD_PCIE_IO_BUS_BASE);
+ mvebu_mbus_add_window_by_id(KIRKWOOD_MBUS_PCIE0_MEM_TARGET,
+ KIRKWOOD_MBUS_PCIE0_MEM_ATTR,
+ KIRKWOOD_PCIE_MEM_PHYS_BASE,
+ KIRKWOOD_PCIE_MEM_SIZE);
+ mvebu_mbus_add_window_remap_by_id(KIRKWOOD_MBUS_PCIE1_IO_TARGET,
+ KIRKWOOD_MBUS_PCIE1_IO_ATTR,
KIRKWOOD_PCIE1_IO_PHYS_BASE,
KIRKWOOD_PCIE1_IO_SIZE,
- KIRKWOOD_PCIE1_IO_BUS_BASE,
- MVEBU_MBUS_PCI_IO);
- mvebu_mbus_add_window_remap_flags("pcie1.0",
- KIRKWOOD_PCIE1_MEM_PHYS_BASE,
- KIRKWOOD_PCIE1_MEM_SIZE,
- MVEBU_MBUS_NO_REMAP,
- MVEBU_MBUS_PCI_MEM);
+ KIRKWOOD_PCIE1_IO_BUS_BASE);
+ mvebu_mbus_add_window_by_id(KIRKWOOD_MBUS_PCIE1_MEM_TARGET,
+ KIRKWOOD_MBUS_PCIE1_MEM_ATTR,
+ KIRKWOOD_PCIE1_MEM_PHYS_BASE,
+ KIRKWOOD_PCIE1_MEM_SIZE);
vga_base = KIRKWOOD_PCIE_MEM_PHYS_BASE;
diff --git a/arch/arm/mach-mv78xx0/pcie.c b/arch/arm/mach-mv78xx0/pcie.c
index dc26a65..445e553 100644
--- a/arch/arm/mach-mv78xx0/pcie.c
+++ b/arch/arm/mach-mv78xx0/pcie.c
@@ -18,6 +18,11 @@
#include <mach/mv78xx0.h>
#include "common.h"
+#define MV78XX0_MBUS_PCIE_MEM_TARGET(port, lane) ((port) ? 8 : 4)
+#define MV78XX0_MBUS_PCIE_MEM_ATTR(port, lane) (0xf8 & ~(0x10 << (lane)))
+#define MV78XX0_MBUS_PCIE_IO_TARGET(port, lane) ((port) ? 8 : 4)
+#define MV78XX0_MBUS_PCIE_IO_ATTR(port, lane) (0xf0 & ~(0x10 << (lane)))
+
struct pcie_port {
u8 maj;
u8 min;
@@ -71,7 +76,6 @@
start = MV78XX0_PCIE_MEM_PHYS_BASE;
for (i = 0; i < num_pcie_ports; i++) {
struct pcie_port *pp = pcie_port + i;
- char winname[MVEBU_MBUS_MAX_WINNAME_SZ];
snprintf(pp->mem_space_name, sizeof(pp->mem_space_name),
"PCIe %d.%d MEM", pp->maj, pp->min);
@@ -85,17 +89,12 @@
if (request_resource(&iomem_resource, &pp->res))
panic("can't allocate PCIe MEM sub-space");
- snprintf(winname, sizeof(winname), "pcie%d.%d",
- pp->maj, pp->min);
-
- mvebu_mbus_add_window_remap_flags(winname,
- pp->res.start,
- resource_size(&pp->res),
- MVEBU_MBUS_NO_REMAP,
- MVEBU_MBUS_PCI_MEM);
- mvebu_mbus_add_window_remap_flags(winname,
- i * SZ_64K, SZ_64K,
- 0, MVEBU_MBUS_PCI_IO);
+ mvebu_mbus_add_window_by_id(MV78XX0_MBUS_PCIE_MEM_TARGET(pp->maj, pp->min),
+ MV78XX0_MBUS_PCIE_MEM_ATTR(pp->maj, pp->min),
+ pp->res.start, resource_size(&pp->res));
+ mvebu_mbus_add_window_remap_by_id(MV78XX0_MBUS_PCIE_IO_TARGET(pp->maj, pp->min),
+ MV78XX0_MBUS_PCIE_IO_ATTR(pp->maj, pp->min),
+ i * SZ_64K, SZ_64K, 0);
}
}
diff --git a/arch/arm/mach-mvebu/armada-370-xp.c b/arch/arm/mach-mvebu/armada-370-xp.c
index 97cbb80..829b573 100644
--- a/arch/arm/mach-mvebu/armada-370-xp.c
+++ b/arch/arm/mach-mvebu/armada-370-xp.c
@@ -34,44 +34,12 @@
debug_ll_io_init();
}
-/*
- * This initialization will be replaced by a DT-based
- * initialization once the mvebu-mbus driver gains DT support.
- */
-
-#define ARMADA_370_XP_MBUS_WINS_OFFS 0x20000
-#define ARMADA_370_XP_MBUS_WINS_SIZE 0x100
-#define ARMADA_370_XP_SDRAM_WINS_OFFS 0x20180
-#define ARMADA_370_XP_SDRAM_WINS_SIZE 0x20
-
-static void __init armada_370_xp_mbus_init(void)
-{
- char *mbus_soc_name;
- struct device_node *dn;
- const __be32 mbus_wins_offs = cpu_to_be32(ARMADA_370_XP_MBUS_WINS_OFFS);
- const __be32 sdram_wins_offs = cpu_to_be32(ARMADA_370_XP_SDRAM_WINS_OFFS);
-
- if (of_machine_is_compatible("marvell,armada370"))
- mbus_soc_name = "marvell,armada370-mbus";
- else
- mbus_soc_name = "marvell,armadaxp-mbus";
-
- dn = of_find_node_by_name(NULL, "internal-regs");
- BUG_ON(!dn);
-
- mvebu_mbus_init(mbus_soc_name,
- of_translate_address(dn, &mbus_wins_offs),
- ARMADA_370_XP_MBUS_WINS_SIZE,
- of_translate_address(dn, &sdram_wins_offs),
- ARMADA_370_XP_SDRAM_WINS_SIZE);
-}
-
static void __init armada_370_xp_timer_and_clk_init(void)
{
of_clk_init(NULL);
armada_370_xp_timer_init();
coherency_init();
- armada_370_xp_mbus_init();
+ BUG_ON(mvebu_mbus_dt_init());
#ifdef CONFIG_CACHE_L2X0
l2x0_of_init(0, ~0UL);
#endif
diff --git a/arch/arm/mach-mvebu/platsmp.c b/arch/arm/mach-mvebu/platsmp.c
index f9c09b7..ff69c2d 100644
--- a/arch/arm/mach-mvebu/platsmp.c
+++ b/arch/arm/mach-mvebu/platsmp.c
@@ -21,6 +21,7 @@
#include <linux/smp.h>
#include <linux/clk.h>
#include <linux/of.h>
+#include <linux/of_address.h>
#include <linux/mbus.h>
#include <asm/cacheflush.h>
#include <asm/smp_plat.h>
@@ -29,6 +30,9 @@
#include "pmsu.h"
#include "coherency.h"
+#define AXP_BOOTROM_BASE 0xfff00000
+#define AXP_BOOTROM_SIZE 0x100000
+
static struct clk *__init get_cpu_clk(int cpu)
{
struct clk *cpu_clk;
@@ -92,10 +96,29 @@
void __init armada_xp_smp_prepare_cpus(unsigned int max_cpus)
{
+ struct device_node *node;
+ struct resource res;
+ int err;
+
set_secondary_cpus_clock();
flush_cache_all();
set_cpu_coherent(cpu_logical_map(smp_processor_id()), 0);
- mvebu_mbus_add_window("bootrom", 0xfff00000, SZ_1M);
+
+ /*
+ * In order to boot the secondary CPUs we need to ensure
+ * the bootROM is mapped at the correct address.
+ */
+ node = of_find_compatible_node(NULL, NULL, "marvell,bootrom");
+ if (!node)
+ panic("Cannot find 'marvell,bootrom' compatible node");
+
+ err = of_address_to_resource(node, 0, &res);
+ if (err < 0)
+ panic("Cannot get 'bootrom' node address");
+
+ if (res.start != AXP_BOOTROM_BASE ||
+ resource_size(&res) != AXP_BOOTROM_SIZE)
+ panic("The address for the BootROM is incorrect");
}
struct smp_operations armada_xp_smp_ops __initdata = {
diff --git a/arch/arm/mach-mxs/mach-mxs.c b/arch/arm/mach-mxs/mach-mxs.c
index 4ce27b53..98f6e2a 100644
--- a/arch/arm/mach-mxs/mach-mxs.c
+++ b/arch/arm/mach-mxs/mach-mxs.c
@@ -14,6 +14,7 @@
#include <linux/clk/mxs.h>
#include <linux/clkdev.h>
#include <linux/clocksource.h>
+#include <linux/clk-provider.h>
#include <linux/delay.h>
#include <linux/err.h>
#include <linux/gpio.h>
@@ -61,6 +62,8 @@
static u32 chipid;
static u32 socid;
+static void __iomem *reset_addr;
+
static inline void __mxs_setl(u32 mask, void __iomem *reg)
{
__raw_writel(mask, reg + MXS_SET_ADDR);
@@ -393,12 +396,33 @@
u32 rev = mxs_get_cpu_rev();
if (rev != MXS_CHIP_REV_UNKNOWN)
- return kasprintf(GFP_KERNEL, "TO%d.%d", (rev >> 4) & 0xf,
+ return kasprintf(GFP_KERNEL, "%d.%d", (rev >> 4) & 0xf,
rev & 0xf);
else
return kasprintf(GFP_KERNEL, "%s", "Unknown");
}
+#define MX23_CLKCTRL_RESET_OFFSET 0x120
+#define MX28_CLKCTRL_RESET_OFFSET 0x1e0
+
+static int __init mxs_restart_init(void)
+{
+ struct device_node *np;
+
+ np = of_find_compatible_node(NULL, NULL, "fsl,clkctrl");
+ reset_addr = of_iomap(np, 0);
+ if (!reset_addr)
+ return -ENODEV;
+
+ if (of_device_is_compatible(np, "fsl,imx23-clkctrl"))
+ reset_addr += MX23_CLKCTRL_RESET_OFFSET;
+ else
+ reset_addr += MX28_CLKCTRL_RESET_OFFSET;
+ of_node_put(np);
+
+ return 0;
+}
+
static void __init mxs_machine_init(void)
{
struct device_node *root;
@@ -433,21 +457,18 @@
imx28_evk_init();
else if (of_machine_is_compatible("bluegiga,apx4devkit"))
apx4devkit_init();
- else if (of_machine_is_compatible("crystalfontz,cfa10037") ||
- of_machine_is_compatible("crystalfontz,cfa10049") ||
- of_machine_is_compatible("crystalfontz,cfa10055") ||
- of_machine_is_compatible("crystalfontz,cfa10057"))
+ else if (of_machine_is_compatible("crystalfontz,cfa10036"))
crystalfontz_init();
of_platform_populate(NULL, of_default_bus_match_table,
NULL, parent);
+ mxs_restart_init();
+
if (of_machine_is_compatible("karo,tx28"))
tx28_post_init();
}
-#define MX23_CLKCTRL_RESET_OFFSET 0x120
-#define MX28_CLKCTRL_RESET_OFFSET 0x1e0
#define MXS_CLKCTRL_RESET_CHIP (1 << 1)
/*
@@ -455,28 +476,16 @@
*/
static void mxs_restart(enum reboot_mode mode, const char *cmd)
{
- struct device_node *np;
- void __iomem *reset_addr;
+ if (reset_addr) {
+ /* reset the chip */
+ __mxs_setl(MXS_CLKCTRL_RESET_CHIP, reset_addr);
- np = of_find_compatible_node(NULL, NULL, "fsl,clkctrl");
- reset_addr = of_iomap(np, 0);
- if (!reset_addr)
- goto soft;
+ pr_err("Failed to assert the chip reset\n");
- if (of_device_is_compatible(np, "fsl,imx23-clkctrl"))
- reset_addr += MX23_CLKCTRL_RESET_OFFSET;
- else
- reset_addr += MX28_CLKCTRL_RESET_OFFSET;
+ /* Delay to allow the serial port to show the message */
+ mdelay(50);
+ }
- /* reset the chip */
- __mxs_setl(MXS_CLKCTRL_RESET_CHIP, reset_addr);
-
- pr_err("Failed to assert the chip reset\n");
-
- /* Delay to allow the serial port to show the message */
- mdelay(50);
-
-soft:
/* We'll take a jump through zero as a poor second */
soft_restart(0);
}
@@ -487,6 +496,7 @@
mx23_clocks_init();
else
mx28_clocks_init();
+ of_clk_init(NULL);
clocksource_of_init();
}
diff --git a/arch/arm/mach-mxs/pm.c b/arch/arm/mach-mxs/pm.c
index b2494d2..0170e99 100644
--- a/arch/arm/mach-mxs/pm.c
+++ b/arch/arm/mach-mxs/pm.c
@@ -15,6 +15,7 @@
#include <linux/kernel.h>
#include <linux/suspend.h>
#include <linux/io.h>
+#include "pm.h"
static int mxs_suspend_enter(suspend_state_t state)
{
diff --git a/arch/arm/mach-omap1/include/mach/soc.h b/arch/arm/mach-omap1/include/mach/soc.h
index 6cf9c1c..612bd1c 100644
--- a/arch/arm/mach-omap1/include/mach/soc.h
+++ b/arch/arm/mach-omap1/include/mach/soc.h
@@ -195,6 +195,7 @@
#define cpu_is_omap34xx() 0
#define cpu_is_omap44xx() 0
#define soc_is_omap54xx() 0
+#define soc_is_dra7xx() 0
#define soc_is_am33xx() 0
#define cpu_class_is_omap1() 1
#define cpu_class_is_omap2() 0
diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
index 56021c6..b5fb5f7 100644
--- a/arch/arm/mach-omap2/Kconfig
+++ b/arch/arm/mach-omap2/Kconfig
@@ -117,7 +117,7 @@
select I2C
select I2C_OMAP
select MENELAUS if ARCH_OMAP2
- select NEON if ARCH_OMAP3 || ARCH_OMAP4 || SOC_OMAP5
+ select NEON if CPU_V7
select PM_RUNTIME
select REGULATOR
select TWL4030_CORE if ARCH_OMAP3 || ARCH_OMAP4
@@ -131,9 +131,17 @@
config SOC_HAS_REALTIME_COUNTER
bool "Real time free running counter"
- depends on SOC_OMAP5
+ depends on SOC_OMAP5 || SOC_DRA7XX
default y
+config SOC_DRA7XX
+ bool "TI DRA7XX"
+ select ARM_ARCH_TIMER
+ select CPU_V7
+ select ARM_GIC
+ select HAVE_SMP
+ select COMMON_CLK
+
comment "OMAP Core Type"
depends on ARCH_OMAP2
diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
index d4f6715..cc36bfe 100644
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -23,6 +23,7 @@
obj-$(CONFIG_SOC_AM33XX) += irq.o $(hwmod-common)
obj-$(CONFIG_SOC_OMAP5) += prm44xx.o $(hwmod-common) $(secure-common)
obj-$(CONFIG_SOC_AM43XX) += $(hwmod-common) $(secure-common)
+obj-$(CONFIG_SOC_DRA7XX) += prm44xx.o $(hwmod-common) $(secure-common)
ifneq ($(CONFIG_SND_OMAP_SOC_MCBSP),)
obj-y += mcbsp.o
@@ -39,6 +40,7 @@
obj-$(CONFIG_ARCH_OMAP4) += $(omap-4-5-common) $(smp-y) sleep44xx.o
obj-$(CONFIG_SOC_OMAP5) += $(omap-4-5-common) $(smp-y) sleep44xx.o
obj-$(CONFIG_SOC_AM43XX) += $(omap-4-5-common)
+obj-$(CONFIG_SOC_DRA7XX) += $(omap-4-5-common) $(smp-y)
plus_sec := $(call as-instr,.arch_extension sec,+sec)
AFLAGS_omap-headsmp.o :=-Wa,-march=armv7-a$(plus_sec)
@@ -87,6 +89,7 @@
obj-$(CONFIG_ARCH_OMAP3) += pm34xx.o sleep34xx.o
obj-$(CONFIG_ARCH_OMAP4) += pm44xx.o omap-mpuss-lowpower.o
obj-$(CONFIG_SOC_OMAP5) += omap-mpuss-lowpower.o
+obj-$(CONFIG_SOC_DRA7XX) += omap-mpuss-lowpower.o
obj-$(CONFIG_PM_DEBUG) += pm-debug.o
obj-$(CONFIG_POWER_AVS_OMAP) += sr_device.o
@@ -114,6 +117,7 @@
vc44xx_data.o vp44xx_data.o
obj-$(CONFIG_ARCH_OMAP4) += $(omap-prcm-4-5-common)
obj-$(CONFIG_SOC_OMAP5) += $(omap-prcm-4-5-common)
+obj-$(CONFIG_SOC_DRA7XX) += $(omap-prcm-4-5-common)
# OMAP voltage domains
voltagedomain-common := voltage.o vc.o vp.o
@@ -143,6 +147,7 @@
obj-$(CONFIG_SOC_AM43XX) += $(powerdomain-common)
obj-$(CONFIG_SOC_OMAP5) += $(powerdomain-common)
obj-$(CONFIG_SOC_OMAP5) += powerdomains54xx_data.o
+obj-$(CONFIG_SOC_DRA7XX) += $(powerdomain-common)
# PRCM clockdomain control
clockdomain-common += clockdomain.o
@@ -160,6 +165,7 @@
obj-$(CONFIG_SOC_AM43XX) += $(clockdomain-common)
obj-$(CONFIG_SOC_OMAP5) += $(clockdomain-common)
obj-$(CONFIG_SOC_OMAP5) += clockdomains54xx_data.o
+obj-$(CONFIG_SOC_DRA7XX) += $(clockdomain-common)
# Clock framework
obj-$(CONFIG_ARCH_OMAP2) += $(clock-common) clock2xxx.o
diff --git a/arch/arm/mach-omap2/board-generic.c b/arch/arm/mach-omap2/board-generic.c
index be5d005..b89e55b 100644
--- a/arch/arm/mach-omap2/board-generic.c
+++ b/arch/arm/mach-omap2/board-generic.c
@@ -222,3 +222,21 @@
.dt_compat = am43_boards_compat,
MACHINE_END
#endif
+
+#ifdef CONFIG_SOC_DRA7XX
+static const char *dra7xx_boards_compat[] __initdata = {
+ "ti,dra7",
+ NULL,
+};
+
+DT_MACHINE_START(DRA7XX_DT, "Generic DRA7XX (Flattened Device Tree)")
+ .reserve = omap_reserve,
+ .smp = smp_ops(omap4_smp_ops),
+ .map_io = omap5_map_io,
+ .init_early = dra7xx_init_early,
+ .init_irq = omap_gic_of_init,
+ .init_machine = omap_generic_init,
+ .init_time = omap5_realtime_timer_init,
+ .dt_compat = dra7xx_boards_compat,
+MACHINE_END
+#endif
diff --git a/arch/arm/mach-omap2/common.h b/arch/arm/mach-omap2/common.h
index dfcc182..4a5684b 100644
--- a/arch/arm/mach-omap2/common.h
+++ b/arch/arm/mach-omap2/common.h
@@ -110,6 +110,7 @@
void am35xx_init_late(void);
void ti81xx_init_late(void);
int omap2_common_pm_late_init(void);
+void dra7xx_init_early(void);
#ifdef CONFIG_SOC_BUS
void omap_soc_device_init(void);
diff --git a/arch/arm/mach-omap2/id.c b/arch/arm/mach-omap2/id.c
index 2dc62a2..0289adc 100644
--- a/arch/arm/mach-omap2/id.c
+++ b/arch/arm/mach-omap2/id.c
@@ -61,7 +61,7 @@
val = omap_ctrl_readl(OMAP343X_CONTROL_STATUS);
} else if (cpu_is_omap44xx()) {
val = omap_ctrl_readl(OMAP4_CTRL_MODULE_CORE_STATUS);
- } else if (soc_is_omap54xx()) {
+ } else if (soc_is_omap54xx() || soc_is_dra7xx()) {
val = omap_ctrl_readl(OMAP5XXX_CONTROL_STATUS);
val &= OMAP5_DEVICETYPE_MASK;
val >>= 6;
@@ -116,7 +116,7 @@
void omap_get_die_id(struct omap_die_id *odi)
{
- if (cpu_is_omap44xx() || soc_is_omap54xx()) {
+ if (cpu_is_omap44xx() || soc_is_omap54xx() || soc_is_dra7xx()) {
odi->id_0 = read_tap_reg(OMAP_TAP_DIE_ID_44XX_0);
odi->id_1 = read_tap_reg(OMAP_TAP_DIE_ID_44XX_1);
odi->id_2 = read_tap_reg(OMAP_TAP_DIE_ID_44XX_2);
diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c
index 4a3f06f..3656b80 100644
--- a/arch/arm/mach-omap2/io.c
+++ b/arch/arm/mach-omap2/io.c
@@ -251,7 +251,7 @@
};
#endif
-#ifdef CONFIG_SOC_OMAP5
+#if defined(CONFIG_SOC_OMAP5) || defined(CONFIG_SOC_DRA7XX)
static struct map_desc omap54xx_io_desc[] __initdata = {
{
.virtual = L3_54XX_VIRT,
@@ -333,7 +333,7 @@
}
#endif
-#ifdef CONFIG_SOC_OMAP5
+#if defined(CONFIG_SOC_OMAP5) || defined(CONFIG_SOC_DRA7XX)
void __init omap5_map_io(void)
{
iotable_init(omap54xx_io_desc, ARRAY_SIZE(omap54xx_io_desc));
@@ -653,6 +653,22 @@
}
#endif
+#ifdef CONFIG_SOC_DRA7XX
+void __init dra7xx_init_early(void)
+{
+ omap2_set_globals_tap(-1, OMAP2_L4_IO_ADDRESS(DRA7XX_TAP_BASE));
+ omap2_set_globals_control(OMAP2_L4_IO_ADDRESS(OMAP54XX_SCM_BASE),
+ OMAP2_L4_IO_ADDRESS(DRA7XX_CTRL_BASE));
+ omap2_set_globals_prm(OMAP2_L4_IO_ADDRESS(OMAP54XX_PRM_BASE));
+ omap2_set_globals_cm(OMAP2_L4_IO_ADDRESS(DRA7XX_CM_CORE_AON_BASE),
+ OMAP2_L4_IO_ADDRESS(OMAP54XX_CM_CORE_BASE));
+ omap2_set_globals_prcm_mpu(OMAP2_L4_IO_ADDRESS(OMAP54XX_PRCM_MPU_BASE));
+ omap_prm_base_init();
+ omap_cm_base_init();
+}
+#endif
+
+
void __init omap_sdrc_init(struct omap_sdrc_params *sdrc_cs0,
struct omap_sdrc_params *sdrc_cs1)
{
diff --git a/arch/arm/mach-omap2/omap54xx.h b/arch/arm/mach-omap2/omap54xx.h
index a086ba1..2d35c57 100644
--- a/arch/arm/mach-omap2/omap54xx.h
+++ b/arch/arm/mach-omap2/omap54xx.h
@@ -30,4 +30,8 @@
#define OMAP54XX_CTRL_BASE 0x4a002800
#define OMAP54XX_SAR_RAM_BASE 0x4ae26000
+#define DRA7XX_CM_CORE_AON_BASE 0x4a005000
+#define DRA7XX_CTRL_BASE 0x4a003400
+#define DRA7XX_TAP_BASE 0x4ae0c000
+
#endif /* __ASM_SOC_OMAP555554XX_H */
diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c
index 7f4db12..b4ecd2c 100644
--- a/arch/arm/mach-omap2/omap_hwmod.c
+++ b/arch/arm/mach-omap2/omap_hwmod.c
@@ -4113,7 +4113,7 @@
soc_ops.assert_hardreset = _omap2_assert_hardreset;
soc_ops.deassert_hardreset = _omap2_deassert_hardreset;
soc_ops.is_hardreset_asserted = _omap2_is_hardreset_asserted;
- } else if (cpu_is_omap44xx() || soc_is_omap54xx()) {
+ } else if (cpu_is_omap44xx() || soc_is_omap54xx() || soc_is_dra7xx()) {
soc_ops.enable_module = _omap4_enable_module;
soc_ops.disable_module = _omap4_disable_module;
soc_ops.wait_target_ready = _omap4_wait_target_ready;
diff --git a/arch/arm/mach-omap2/soc.h b/arch/arm/mach-omap2/soc.h
index 8c616e4..4588df1 100644
--- a/arch/arm/mach-omap2/soc.h
+++ b/arch/arm/mach-omap2/soc.h
@@ -8,6 +8,7 @@
* Written by Tony Lindgren <tony.lindgren@nokia.com>
*
* Added OMAP4/5 specific defines - Santosh Shilimkar<santosh.shilimkar@ti.com>
+ * Added DRA7xxx specific defines - Sricharan R<r.sricharan@ti.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -35,6 +36,7 @@
#ifndef __ASSEMBLY__
#include <linux/bitops.h>
+#include <linux/of.h>
/*
* Test if multicore OMAP support is needed
@@ -105,6 +107,15 @@
# endif
#endif
+#ifdef CONFIG_SOC_DRA7XX
+# ifdef OMAP_NAME
+# undef MULTI_OMAP2
+# define MULTI_OMAP2
+# else
+# define OMAP_NAME DRA7XX
+# endif
+#endif
+
/*
* Omap device type i.e. EMU/HS/TST/GP/BAD
*/
@@ -233,6 +244,7 @@
#define cpu_is_omap447x() 0
#define soc_is_omap54xx() 0
#define soc_is_omap543x() 0
+#define soc_is_dra7xx() 0
#if defined(MULTI_OMAP2)
# if defined(CONFIG_ARCH_OMAP2)
@@ -379,6 +391,11 @@
# define soc_is_omap543x() is_omap543x()
#endif
+#if defined(CONFIG_SOC_DRA7XX)
+#undef soc_is_dra7xx
+#define soc_is_dra7xx() (of_machine_is_compatible("ti,dra7"))
+#endif
+
/* Various silicon revisions for omap2 */
#define OMAP242X_CLASS 0x24200024
#define OMAP2420_REV_ES1_0 OMAP242X_CLASS
diff --git a/arch/arm/mach-omap2/timer.c b/arch/arm/mach-omap2/timer.c
index 801287ee..fa74a06 100644
--- a/arch/arm/mach-omap2/timer.c
+++ b/arch/arm/mach-omap2/timer.c
@@ -594,7 +594,8 @@
1, "timer_sys_ck", "ti,timer-alwon");
#endif
-#if defined(CONFIG_ARCH_OMAP4) || defined(CONFIG_SOC_OMAP5)
+#if defined(CONFIG_ARCH_OMAP4) || defined(CONFIG_SOC_OMAP5) || \
+ defined(CONFIG_SOC_DRA7XX)
static OMAP_SYS_32K_TIMER_INIT(4, 1, "timer_32k_ck", "ti,timer-alwon",
2, "sys_clkin_ck", NULL);
#endif
diff --git a/arch/arm/mach-orion5x/common.c b/arch/arm/mach-orion5x/common.c
index b41599f..91a5852 100644
--- a/arch/arm/mach-orion5x/common.c
+++ b/arch/arm/mach-orion5x/common.c
@@ -174,8 +174,10 @@
****************************************************************************/
static void __init orion5x_crypto_init(void)
{
- mvebu_mbus_add_window("sram", ORION5X_SRAM_PHYS_BASE,
- ORION5X_SRAM_SIZE);
+ mvebu_mbus_add_window_by_id(ORION_MBUS_SRAM_TARGET,
+ ORION_MBUS_SRAM_ATTR,
+ ORION5X_SRAM_PHYS_BASE,
+ ORION5X_SRAM_SIZE);
orion_crypto_init(ORION5X_CRYPTO_PHYS_BASE, ORION5X_SRAM_PHYS_BASE,
SZ_8K, IRQ_ORION5X_CESA);
}
@@ -222,22 +224,24 @@
* The PCIe windows will no longer be statically allocated
* here once Orion5x is migrated to the pci-mvebu driver.
*/
- mvebu_mbus_add_window_remap_flags("pcie0.0", ORION5X_PCIE_IO_PHYS_BASE,
+ mvebu_mbus_add_window_remap_by_id(ORION_MBUS_PCIE_IO_TARGET,
+ ORION_MBUS_PCIE_IO_ATTR,
+ ORION5X_PCIE_IO_PHYS_BASE,
ORION5X_PCIE_IO_SIZE,
- ORION5X_PCIE_IO_BUS_BASE,
- MVEBU_MBUS_PCI_IO);
- mvebu_mbus_add_window_remap_flags("pcie0.0", ORION5X_PCIE_MEM_PHYS_BASE,
- ORION5X_PCIE_MEM_SIZE,
- MVEBU_MBUS_NO_REMAP,
- MVEBU_MBUS_PCI_MEM);
- mvebu_mbus_add_window_remap_flags("pci0.0", ORION5X_PCI_IO_PHYS_BASE,
+ ORION5X_PCIE_IO_BUS_BASE);
+ mvebu_mbus_add_window_by_id(ORION_MBUS_PCIE_MEM_TARGET,
+ ORION_MBUS_PCIE_MEM_ATTR,
+ ORION5X_PCIE_MEM_PHYS_BASE,
+ ORION5X_PCIE_MEM_SIZE);
+ mvebu_mbus_add_window_remap_by_id(ORION_MBUS_PCI_IO_TARGET,
+ ORION_MBUS_PCI_IO_ATTR,
+ ORION5X_PCI_IO_PHYS_BASE,
ORION5X_PCI_IO_SIZE,
- ORION5X_PCI_IO_BUS_BASE,
- MVEBU_MBUS_PCI_IO);
- mvebu_mbus_add_window_remap_flags("pci0.0", ORION5X_PCI_MEM_PHYS_BASE,
- ORION5X_PCI_MEM_SIZE,
- MVEBU_MBUS_NO_REMAP,
- MVEBU_MBUS_PCI_MEM);
+ ORION5X_PCI_IO_BUS_BASE);
+ mvebu_mbus_add_window_by_id(ORION_MBUS_PCI_MEM_TARGET,
+ ORION_MBUS_PCI_MEM_ATTR,
+ ORION5X_PCI_MEM_PHYS_BASE,
+ ORION5X_PCI_MEM_SIZE);
}
int orion5x_tclk;
diff --git a/arch/arm/mach-orion5x/common.h b/arch/arm/mach-orion5x/common.h
index a909afb..f565f99 100644
--- a/arch/arm/mach-orion5x/common.h
+++ b/arch/arm/mach-orion5x/common.h
@@ -7,6 +7,23 @@
struct mv643xx_eth_platform_data;
struct mv_sata_platform_data;
+#define ORION_MBUS_PCIE_MEM_TARGET 0x04
+#define ORION_MBUS_PCIE_MEM_ATTR 0x59
+#define ORION_MBUS_PCIE_IO_TARGET 0x04
+#define ORION_MBUS_PCIE_IO_ATTR 0x51
+#define ORION_MBUS_PCIE_WA_TARGET 0x04
+#define ORION_MBUS_PCIE_WA_ATTR 0x79
+#define ORION_MBUS_PCI_MEM_TARGET 0x03
+#define ORION_MBUS_PCI_MEM_ATTR 0x59
+#define ORION_MBUS_PCI_IO_TARGET 0x03
+#define ORION_MBUS_PCI_IO_ATTR 0x51
+#define ORION_MBUS_DEVBUS_BOOT_TARGET 0x01
+#define ORION_MBUS_DEVBUS_BOOT_ATTR 0x0f
+#define ORION_MBUS_DEVBUS_TARGET(cs) 0x01
+#define ORION_MBUS_DEVBUS_ATTR(cs) (~(1 << cs))
+#define ORION_MBUS_SRAM_TARGET 0x00
+#define ORION_MBUS_SRAM_ATTR 0x00
+
/*
* Basic Orion init functions used early by machine-setup.
*/
diff --git a/arch/arm/mach-orion5x/d2net-setup.c b/arch/arm/mach-orion5x/d2net-setup.c
index 16c88bb..8f68b74 100644
--- a/arch/arm/mach-orion5x/d2net-setup.c
+++ b/arch/arm/mach-orion5x/d2net-setup.c
@@ -317,8 +317,10 @@
d2net_sata_power_init();
orion5x_sata_init(&d2net_sata_data);
- mvebu_mbus_add_window("devbus-boot", D2NET_NOR_BOOT_BASE,
- D2NET_NOR_BOOT_SIZE);
+ mvebu_mbus_add_window_by_id(ORION_MBUS_DEVBUS_BOOT_TARGET,
+ ORION_MBUS_DEVBUS_BOOT_ATTR,
+ D2NET_NOR_BOOT_BASE,
+ D2NET_NOR_BOOT_SIZE);
platform_device_register(&d2net_nor_flash);
platform_device_register(&d2net_gpio_buttons);
diff --git a/arch/arm/mach-orion5x/db88f5281-setup.c b/arch/arm/mach-orion5x/db88f5281-setup.c
index 4e1263d..4b2aefd 100644
--- a/arch/arm/mach-orion5x/db88f5281-setup.c
+++ b/arch/arm/mach-orion5x/db88f5281-setup.c
@@ -340,19 +340,27 @@
orion5x_uart0_init();
orion5x_uart1_init();
- mvebu_mbus_add_window("devbus-boot", DB88F5281_NOR_BOOT_BASE,
- DB88F5281_NOR_BOOT_SIZE);
+ mvebu_mbus_add_window_by_id(ORION_MBUS_DEVBUS_BOOT_TARGET,
+ ORION_MBUS_DEVBUS_BOOT_ATTR,
+ DB88F5281_NOR_BOOT_BASE,
+ DB88F5281_NOR_BOOT_SIZE);
platform_device_register(&db88f5281_boot_flash);
- mvebu_mbus_add_window("devbus-cs0", DB88F5281_7SEG_BASE,
- DB88F5281_7SEG_SIZE);
+ mvebu_mbus_add_window_by_id(ORION_MBUS_DEVBUS_TARGET(0),
+ ORION_MBUS_DEVBUS_ATTR(0),
+ DB88F5281_7SEG_BASE,
+ DB88F5281_7SEG_SIZE);
- mvebu_mbus_add_window("devbus-cs1", DB88F5281_NOR_BASE,
- DB88F5281_NOR_SIZE);
+ mvebu_mbus_add_window_by_id(ORION_MBUS_DEVBUS_TARGET(1),
+ ORION_MBUS_DEVBUS_ATTR(1),
+ DB88F5281_NOR_BASE,
+ DB88F5281_NOR_SIZE);
platform_device_register(&db88f5281_nor_flash);
- mvebu_mbus_add_window("devbus-cs2", DB88F5281_NAND_BASE,
- DB88F5281_NAND_SIZE);
+ mvebu_mbus_add_window_by_id(ORION_MBUS_DEVBUS_TARGET(2),
+ ORION_MBUS_DEVBUS_ATTR(2),
+ DB88F5281_NAND_BASE,
+ DB88F5281_NAND_SIZE);
platform_device_register(&db88f5281_nand_flash);
i2c_register_board_info(0, &db88f5281_i2c_rtc, 1);
diff --git a/arch/arm/mach-orion5x/dns323-setup.c b/arch/arm/mach-orion5x/dns323-setup.c
index 9e6baf5..7097473 100644
--- a/arch/arm/mach-orion5x/dns323-setup.c
+++ b/arch/arm/mach-orion5x/dns323-setup.c
@@ -611,8 +611,10 @@
/* setup flash mapping
* CS3 holds a 8 MB Spansion S29GL064M90TFIR4
*/
- mvebu_mbus_add_window("devbus-boot", DNS323_NOR_BOOT_BASE,
- DNS323_NOR_BOOT_SIZE);
+ mvebu_mbus_add_window_by_id(ORION_MBUS_DEVBUS_BOOT_TARGET,
+ ORION_MBUS_DEVBUS_BOOT_ATTR,
+ DNS323_NOR_BOOT_BASE,
+ DNS323_NOR_BOOT_SIZE);
platform_device_register(&dns323_nor_flash);
/* Sort out LEDs, Buttons and i2c devices */
diff --git a/arch/arm/mach-orion5x/edmini_v2-setup.c b/arch/arm/mach-orion5x/edmini_v2-setup.c
index 1476155..0fc33c5 100644
--- a/arch/arm/mach-orion5x/edmini_v2-setup.c
+++ b/arch/arm/mach-orion5x/edmini_v2-setup.c
@@ -154,8 +154,10 @@
orion5x_ehci0_init();
orion5x_eth_init(&edmini_v2_eth_data);
- mvebu_mbus_add_window("devbus-boot", EDMINI_V2_NOR_BOOT_BASE,
- EDMINI_V2_NOR_BOOT_SIZE);
+ mvebu_mbus_add_window_by_id(ORION_MBUS_DEVBUS_BOOT_TARGET,
+ ORION_MBUS_DEVBUS_BOOT_ATTR,
+ EDMINI_V2_NOR_BOOT_BASE,
+ EDMINI_V2_NOR_BOOT_SIZE);
platform_device_register(&edmini_v2_nor_flash);
pr_notice("edmini_v2: USB device port, flash write and power-off "
diff --git a/arch/arm/mach-orion5x/kurobox_pro-setup.c b/arch/arm/mach-orion5x/kurobox_pro-setup.c
index aae10e4..fe6a48a 100644
--- a/arch/arm/mach-orion5x/kurobox_pro-setup.c
+++ b/arch/arm/mach-orion5x/kurobox_pro-setup.c
@@ -359,13 +359,17 @@
orion5x_uart1_init();
orion5x_xor_init();
- mvebu_mbus_add_window("devbus-boot", KUROBOX_PRO_NOR_BOOT_BASE,
- KUROBOX_PRO_NOR_BOOT_SIZE);
+ mvebu_mbus_add_window_by_id(ORION_MBUS_DEVBUS_BOOT_TARGET,
+ ORION_MBUS_DEVBUS_BOOT_ATTR,
+ KUROBOX_PRO_NOR_BOOT_BASE,
+ KUROBOX_PRO_NOR_BOOT_SIZE);
platform_device_register(&kurobox_pro_nor_flash);
if (machine_is_kurobox_pro()) {
- mvebu_mbus_add_window("devbus-cs0", KUROBOX_PRO_NAND_BASE,
- KUROBOX_PRO_NAND_SIZE);
+ mvebu_mbus_add_window_by_id(ORION_MBUS_DEVBUS_TARGET(0),
+ ORION_MBUS_DEVBUS_ATTR(0),
+ KUROBOX_PRO_NAND_BASE,
+ KUROBOX_PRO_NAND_SIZE);
platform_device_register(&kurobox_pro_nand_flash);
}
diff --git a/arch/arm/mach-orion5x/ls-chl-setup.c b/arch/arm/mach-orion5x/ls-chl-setup.c
index 6234977..028ea03 100644
--- a/arch/arm/mach-orion5x/ls-chl-setup.c
+++ b/arch/arm/mach-orion5x/ls-chl-setup.c
@@ -294,8 +294,10 @@
orion5x_uart0_init();
orion5x_xor_init();
- mvebu_mbus_add_window("devbus-boot", LSCHL_NOR_BOOT_BASE,
- LSCHL_NOR_BOOT_SIZE);
+ mvebu_mbus_add_window_by_id(ORION_MBUS_DEVBUS_BOOT_TARGET,
+ ORION_MBUS_DEVBUS_BOOT_ATTR,
+ LSCHL_NOR_BOOT_BASE,
+ LSCHL_NOR_BOOT_SIZE);
platform_device_register(&lschl_nor_flash);
platform_device_register(&lschl_leds);
diff --git a/arch/arm/mach-orion5x/ls_hgl-setup.c b/arch/arm/mach-orion5x/ls_hgl-setup.c
index fe04c4b..32b7129 100644
--- a/arch/arm/mach-orion5x/ls_hgl-setup.c
+++ b/arch/arm/mach-orion5x/ls_hgl-setup.c
@@ -243,8 +243,10 @@
orion5x_uart0_init();
orion5x_xor_init();
- mvebu_mbus_add_window("devbus-boot", LS_HGL_NOR_BOOT_BASE,
- LS_HGL_NOR_BOOT_SIZE);
+ mvebu_mbus_add_window_by_id(ORION_MBUS_DEVBUS_BOOT_TARGET,
+ ORION_MBUS_DEVBUS_BOOT_ATTR,
+ LS_HGL_NOR_BOOT_BASE,
+ LS_HGL_NOR_BOOT_SIZE);
platform_device_register(&ls_hgl_nor_flash);
platform_device_register(&ls_hgl_button_device);
diff --git a/arch/arm/mach-orion5x/lsmini-setup.c b/arch/arm/mach-orion5x/lsmini-setup.c
index ca4dbe9..a6493e7 100644
--- a/arch/arm/mach-orion5x/lsmini-setup.c
+++ b/arch/arm/mach-orion5x/lsmini-setup.c
@@ -244,8 +244,10 @@
orion5x_uart0_init();
orion5x_xor_init();
- mvebu_mbus_add_window("devbus-boot", LSMINI_NOR_BOOT_BASE,
- LSMINI_NOR_BOOT_SIZE);
+ mvebu_mbus_add_window_by_id(ORION_MBUS_DEVBUS_BOOT_TARGET,
+ ORION_MBUS_DEVBUS_BOOT_ATTR,
+ LSMINI_NOR_BOOT_BASE,
+ LSMINI_NOR_BOOT_SIZE);
platform_device_register(&lsmini_nor_flash);
platform_device_register(&lsmini_button_device);
diff --git a/arch/arm/mach-orion5x/mss2-setup.c b/arch/arm/mach-orion5x/mss2-setup.c
index 827acba..e105130 100644
--- a/arch/arm/mach-orion5x/mss2-setup.c
+++ b/arch/arm/mach-orion5x/mss2-setup.c
@@ -241,8 +241,10 @@
orion5x_uart0_init();
orion5x_xor_init();
- mvebu_mbus_add_window("devbus-boot", MSS2_NOR_BOOT_BASE,
- MSS2_NOR_BOOT_SIZE);
+ mvebu_mbus_add_window_by_id(ORION_MBUS_DEVBUS_BOOT_TARGET,
+ ORION_MBUS_DEVBUS_BOOT_ATTR,
+ MSS2_NOR_BOOT_BASE,
+ MSS2_NOR_BOOT_SIZE);
platform_device_register(&mss2_nor_flash);
platform_device_register(&mss2_button_device);
diff --git a/arch/arm/mach-orion5x/mv2120-setup.c b/arch/arm/mach-orion5x/mv2120-setup.c
index 92600ae..e032f01 100644
--- a/arch/arm/mach-orion5x/mv2120-setup.c
+++ b/arch/arm/mach-orion5x/mv2120-setup.c
@@ -204,8 +204,10 @@
orion5x_uart0_init();
orion5x_xor_init();
- mvebu_mbus_add_window("devbus-boot", MV2120_NOR_BOOT_BASE,
- MV2120_NOR_BOOT_SIZE);
+ mvebu_mbus_add_window_by_id(ORION_MBUS_DEVBUS_BOOT_TARGET,
+ ORION_MBUS_DEVBUS_BOOT_ATTR,
+ MV2120_NOR_BOOT_BASE,
+ MV2120_NOR_BOOT_SIZE);
platform_device_register(&mv2120_nor_flash);
platform_device_register(&mv2120_button_device);
diff --git a/arch/arm/mach-orion5x/net2big-setup.c b/arch/arm/mach-orion5x/net2big-setup.c
index dd0641a..ba73dc7 100644
--- a/arch/arm/mach-orion5x/net2big-setup.c
+++ b/arch/arm/mach-orion5x/net2big-setup.c
@@ -397,8 +397,10 @@
net2big_sata_power_init();
orion5x_sata_init(&net2big_sata_data);
- mvebu_mbus_add_window("devbus-boot", NET2BIG_NOR_BOOT_BASE,
- NET2BIG_NOR_BOOT_SIZE);
+ mvebu_mbus_add_window_by_id(ORION_MBUS_DEVBUS_BOOT_TARGET,
+ ORION_MBUS_DEVBUS_BOOT_ATTR,
+ NET2BIG_NOR_BOOT_BASE,
+ NET2BIG_NOR_BOOT_SIZE);
platform_device_register(&net2big_nor_flash);
platform_device_register(&net2big_gpio_buttons);
diff --git a/arch/arm/mach-orion5x/pci.c b/arch/arm/mach-orion5x/pci.c
index 5033680..7fab670 100644
--- a/arch/arm/mach-orion5x/pci.c
+++ b/arch/arm/mach-orion5x/pci.c
@@ -157,11 +157,10 @@
if (dev == MV88F5181_DEV_ID || dev == MV88F5182_DEV_ID) {
printk(KERN_NOTICE "Applying Orion-1/Orion-NAS PCIe config "
"read transaction workaround\n");
- mvebu_mbus_add_window_remap_flags("pcie0.0",
- ORION5X_PCIE_WA_PHYS_BASE,
- ORION5X_PCIE_WA_SIZE,
- MVEBU_MBUS_NO_REMAP,
- MVEBU_MBUS_PCI_WA);
+ mvebu_mbus_add_window_by_id(ORION_MBUS_PCIE_WA_TARGET,
+ ORION_MBUS_PCIE_WA_ATTR,
+ ORION5X_PCIE_WA_PHYS_BASE,
+ ORION5X_PCIE_WA_SIZE);
pcie_ops.read = pcie_rd_conf_wa;
}
diff --git a/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c b/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c
index 1c4498b..213b3e1 100644
--- a/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c
+++ b/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c
@@ -123,8 +123,10 @@
orion5x_eth_switch_init(&rd88f5181l_fxo_switch_plat_data, NO_IRQ);
orion5x_uart0_init();
- mvebu_mbus_add_window("devbus-boot", RD88F5181L_FXO_NOR_BOOT_BASE,
- RD88F5181L_FXO_NOR_BOOT_SIZE);
+ mvebu_mbus_add_window_by_id(ORION_MBUS_DEVBUS_BOOT_TARGET,
+ ORION_MBUS_DEVBUS_BOOT_ATTR,
+ RD88F5181L_FXO_NOR_BOOT_BASE,
+ RD88F5181L_FXO_NOR_BOOT_SIZE);
platform_device_register(&rd88f5181l_fxo_nor_boot_flash);
}
diff --git a/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c b/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c
index adabe34..594800e 100644
--- a/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c
+++ b/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c
@@ -130,8 +130,10 @@
orion5x_i2c_init();
orion5x_uart0_init();
- mvebu_mbus_add_window("devbus-boot", RD88F5181L_GE_NOR_BOOT_BASE,
- RD88F5181L_GE_NOR_BOOT_SIZE);
+ mvebu_mbus_add_window_by_id(ORION_MBUS_DEVBUS_BOOT_TARGET,
+ ORION_MBUS_DEVBUS_BOOT_ATTR,
+ RD88F5181L_GE_NOR_BOOT_BASE,
+ RD88F5181L_GE_NOR_BOOT_SIZE);
platform_device_register(&rd88f5181l_ge_nor_boot_flash);
i2c_register_board_info(0, &rd88f5181l_ge_i2c_rtc, 1);
diff --git a/arch/arm/mach-orion5x/rd88f5182-setup.c b/arch/arm/mach-orion5x/rd88f5182-setup.c
index 66e77ec..b1cf684 100644
--- a/arch/arm/mach-orion5x/rd88f5182-setup.c
+++ b/arch/arm/mach-orion5x/rd88f5182-setup.c
@@ -264,11 +264,14 @@
orion5x_uart0_init();
orion5x_xor_init();
- mvebu_mbus_add_window("devbus-boot", RD88F5182_NOR_BOOT_BASE,
- RD88F5182_NOR_BOOT_SIZE);
-
- mvebu_mbus_add_window("devbus-cs1", RD88F5182_NOR_BASE,
- RD88F5182_NOR_SIZE);
+ mvebu_mbus_add_window_by_id(ORION_MBUS_DEVBUS_BOOT_TARGET,
+ ORION_MBUS_DEVBUS_BOOT_ATTR,
+ RD88F5182_NOR_BOOT_BASE,
+ RD88F5182_NOR_BOOT_SIZE);
+ mvebu_mbus_add_window_by_id(ORION_MBUS_DEVBUS_TARGET(1),
+ ORION_MBUS_DEVBUS_ATTR(1),
+ RD88F5182_NOR_BASE,
+ RD88F5182_NOR_SIZE);
platform_device_register(&rd88f5182_nor_flash);
platform_device_register(&rd88f5182_gpio_leds);
diff --git a/arch/arm/mach-orion5x/terastation_pro2-setup.c b/arch/arm/mach-orion5x/terastation_pro2-setup.c
index a0bfa53..7e90648 100644
--- a/arch/arm/mach-orion5x/terastation_pro2-setup.c
+++ b/arch/arm/mach-orion5x/terastation_pro2-setup.c
@@ -329,8 +329,10 @@
/*
* Configure peripherals.
*/
- mvebu_mbus_add_window("devbus-boot", TSP2_NOR_BOOT_BASE,
- TSP2_NOR_BOOT_SIZE);
+ mvebu_mbus_add_window_by_id(ORION_MBUS_DEVBUS_BOOT_TARGET,
+ ORION_MBUS_DEVBUS_BOOT_ATTR,
+ TSP2_NOR_BOOT_BASE,
+ TSP2_NOR_BOOT_SIZE);
platform_device_register(&tsp2_nor_flash);
orion5x_ehci0_init();
diff --git a/arch/arm/mach-orion5x/ts209-setup.c b/arch/arm/mach-orion5x/ts209-setup.c
index 80174f0..e90c061 100644
--- a/arch/arm/mach-orion5x/ts209-setup.c
+++ b/arch/arm/mach-orion5x/ts209-setup.c
@@ -286,8 +286,10 @@
/*
* Configure peripherals.
*/
- mvebu_mbus_add_window("devbus-boot", QNAP_TS209_NOR_BOOT_BASE,
- QNAP_TS209_NOR_BOOT_SIZE);
+ mvebu_mbus_add_window_by_id(ORION_MBUS_DEVBUS_BOOT_TARGET,
+ ORION_MBUS_DEVBUS_BOOT_ATTR,
+ QNAP_TS209_NOR_BOOT_BASE,
+ QNAP_TS209_NOR_BOOT_SIZE);
platform_device_register(&qnap_ts209_nor_flash);
orion5x_ehci0_init();
diff --git a/arch/arm/mach-orion5x/ts409-setup.c b/arch/arm/mach-orion5x/ts409-setup.c
index 9259279..5c079d31 100644
--- a/arch/arm/mach-orion5x/ts409-setup.c
+++ b/arch/arm/mach-orion5x/ts409-setup.c
@@ -277,8 +277,10 @@
/*
* Configure peripherals.
*/
- mvebu_mbus_add_window("devbus-boot", QNAP_TS409_NOR_BOOT_BASE,
- QNAP_TS409_NOR_BOOT_SIZE);
+ mvebu_mbus_add_window_by_id(ORION_MBUS_DEVBUS_BOOT_TARGET,
+ ORION_MBUS_DEVBUS_BOOT_ATTR,
+ QNAP_TS409_NOR_BOOT_BASE,
+ QNAP_TS409_NOR_BOOT_SIZE);
platform_device_register(&qnap_ts409_nor_flash);
orion5x_ehci0_init();
diff --git a/arch/arm/mach-orion5x/wnr854t-setup.c b/arch/arm/mach-orion5x/wnr854t-setup.c
index 6b84863..80a56ee 100644
--- a/arch/arm/mach-orion5x/wnr854t-setup.c
+++ b/arch/arm/mach-orion5x/wnr854t-setup.c
@@ -127,8 +127,10 @@
orion5x_eth_switch_init(&wnr854t_switch_plat_data, NO_IRQ);
orion5x_uart0_init();
- mvebu_mbus_add_window("devbus-boot", WNR854T_NOR_BOOT_BASE,
- WNR854T_NOR_BOOT_SIZE);
+ mvebu_mbus_add_window_by_id(ORION_MBUS_DEVBUS_BOOT_TARGET,
+ ORION_MBUS_DEVBUS_BOOT_ATTR,
+ WNR854T_NOR_BOOT_BASE,
+ WNR854T_NOR_BOOT_SIZE);
platform_device_register(&wnr854t_nor_flash);
}
diff --git a/arch/arm/mach-orion5x/wrt350n-v2-setup.c b/arch/arm/mach-orion5x/wrt350n-v2-setup.c
index fae684b..670e30d 100644
--- a/arch/arm/mach-orion5x/wrt350n-v2-setup.c
+++ b/arch/arm/mach-orion5x/wrt350n-v2-setup.c
@@ -213,8 +213,10 @@
orion5x_eth_switch_init(&wrt350n_v2_switch_plat_data, NO_IRQ);
orion5x_uart0_init();
- mvebu_mbus_add_window("devbus-boot", WRT350N_V2_NOR_BOOT_BASE,
- WRT350N_V2_NOR_BOOT_SIZE);
+ mvebu_mbus_add_window_by_id(ORION_MBUS_DEVBUS_BOOT_TARGET,
+ ORION_MBUS_DEVBUS_BOOT_ATTR,
+ WRT350N_V2_NOR_BOOT_BASE,
+ WRT350N_V2_NOR_BOOT_SIZE);
platform_device_register(&wrt350n_v2_nor_flash);
platform_device_register(&wrt350n_v2_leds);
platform_device_register(&wrt350n_v2_button_device);
diff --git a/arch/arm/mach-prima2/pm.c b/arch/arm/mach-prima2/pm.c
index 02cc3438..c4525a8 100644
--- a/arch/arm/mach-prima2/pm.c
+++ b/arch/arm/mach-prima2/pm.c
@@ -34,7 +34,10 @@
pwr_trigger_en_reg = sirfsoc_rtc_iobrg_readl(sirfsoc_pwrc_base +
SIRFSOC_PWRC_TRIGGER_EN);
#define X_ON_KEY_B (1 << 0)
- sirfsoc_rtc_iobrg_writel(pwr_trigger_en_reg | X_ON_KEY_B,
+#define RTC_ALARM0_B (1 << 2)
+#define RTC_ALARM1_B (1 << 3)
+ sirfsoc_rtc_iobrg_writel(pwr_trigger_en_reg | X_ON_KEY_B |
+ RTC_ALARM0_B | RTC_ALARM1_B,
sirfsoc_pwrc_base + SIRFSOC_PWRC_TRIGGER_EN);
}
@@ -85,12 +88,6 @@
.valid = suspend_valid_only_mem,
};
-int __init sirfsoc_pm_init(void)
-{
- suspend_set_ops(&sirfsoc_pm_ops);
- return 0;
-}
-
static const struct of_device_id pwrc_ids[] = {
{ .compatible = "sirf,prima2-pwrc" },
{}
@@ -118,7 +115,6 @@
return 0;
}
-postcore_initcall(sirfsoc_of_pwrc_init);
static const struct of_device_id memc_ids[] = {
{ .compatible = "sirf,prima2-memc" },
@@ -149,4 +145,11 @@
{
return platform_driver_register(&sirfsoc_memc_driver);
}
-postcore_initcall(sirfsoc_memc_init);
+
+int __init sirfsoc_pm_init(void)
+{
+ sirfsoc_of_pwrc_init();
+ sirfsoc_memc_init();
+ suspend_set_ops(&sirfsoc_pm_ops);
+ return 0;
+}
diff --git a/arch/arm/mach-shmobile/Kconfig b/arch/arm/mach-shmobile/Kconfig
index cdefd7d..403c939 100644
--- a/arch/arm/mach-shmobile/Kconfig
+++ b/arch/arm/mach-shmobile/Kconfig
@@ -61,9 +61,10 @@
select ARCH_WANT_OPTIONAL_GPIOLIB
select ARM_GIC
select CPU_V7
- select HAVE_ARM_ARCH_TIMER
select SH_CLK_CPG
select RENESAS_IRQC
+ select ARCH_HAS_CPUFREQ
+ select ARCH_HAS_OPP
config ARCH_R8A7740
bool "R-Mobile A1 (R8A77400)"
@@ -97,7 +98,6 @@
select ARCH_WANT_OPTIONAL_GPIOLIB
select ARM_GIC
select CPU_V7
- select HAVE_ARM_ARCH_TIMER
select SH_CLK_CPG
select RENESAS_IRQC
diff --git a/arch/arm/mach-shmobile/board-ape6evm.c b/arch/arm/mach-shmobile/board-ape6evm.c
index 1fbc39a..af6dd39 100644
--- a/arch/arm/mach-shmobile/board-ape6evm.c
+++ b/arch/arm/mach-shmobile/board-ape6evm.c
@@ -101,6 +101,7 @@
};
DT_MACHINE_START(APE6EVM_DT, "ape6evm")
+ .init_early = r8a73a4_init_delay,
.init_time = shmobile_timer_init,
.init_machine = ape6evm_add_standard_devices,
.dt_compat = ape6evm_boards_compat_dt,
diff --git a/arch/arm/mach-shmobile/board-lager.c b/arch/arm/mach-shmobile/board-lager.c
index 78d92d3..f89f166 100644
--- a/arch/arm/mach-shmobile/board-lager.c
+++ b/arch/arm/mach-shmobile/board-lager.c
@@ -102,6 +102,7 @@
};
DT_MACHINE_START(LAGER_DT, "lager")
+ .init_early = r8a7790_init_delay,
.init_time = r8a7790_timer_init,
.init_machine = lager_add_standard_devices,
.dt_compat = lager_boards_compat_dt,
diff --git a/arch/arm/mach-shmobile/clock-emev2.c b/arch/arm/mach-shmobile/clock-emev2.c
index 56dd0cf..5ac13ba 100644
--- a/arch/arm/mach-shmobile/clock-emev2.c
+++ b/arch/arm/mach-shmobile/clock-emev2.c
@@ -40,7 +40,6 @@
#define USIB2SCLKDIV 0x65c
#define USIB3SCLKDIV 0x660
#define STI_CLKSEL 0x688
-#define SMU_GENERAL_REG0 0x7c0
/* not pretty, but hey */
static void __iomem *smu_base;
@@ -51,11 +50,6 @@
iowrite32(value, smu_base + offs);
}
-void emev2_set_boot_vector(unsigned long value)
-{
- emev2_smu_write(value, SMU_GENERAL_REG0);
-}
-
static struct clk_mapping smu_mapping = {
.phys = EMEV2_SMU_BASE,
.len = PAGE_SIZE,
@@ -205,18 +199,6 @@
void __init emev2_clock_init(void)
{
int k, ret = 0;
- static int is_setup;
-
- /* yuck, this is ugly as hell, but the non-smp case of clocks
- * code is now designed to rely on ioremap() instead of static
- * entity maps. in the case of smp we need access to the SMU
- * register earlier than ioremap() is actually working without
- * any static maps. to enable SMP in ugly but with dynamic
- * mappings we have to call emev2_clock_init() from different
- * places depending on UP and SMP...
- */
- if (is_setup++)
- return;
smu_base = ioremap(EMEV2_SMU_BASE, PAGE_SIZE);
BUG_ON(!smu_base);
diff --git a/arch/arm/mach-shmobile/clock-r8a73a4.c b/arch/arm/mach-shmobile/clock-r8a73a4.c
index 5f7fe62..8ea5ef6 100644
--- a/arch/arm/mach-shmobile/clock-r8a73a4.c
+++ b/arch/arm/mach-shmobile/clock-r8a73a4.c
@@ -30,10 +30,12 @@
#define SMSTPCR2 0xe6150138
#define SMSTPCR3 0xe615013c
+#define SMSTPCR4 0xe6150140
#define SMSTPCR5 0xe6150144
#define FRQCRA 0xE6150000
#define FRQCRB 0xE6150004
+#define FRQCRC 0xE61500E0
#define VCLKCR1 0xE6150008
#define VCLKCR2 0xE615000C
#define VCLKCR3 0xE615001C
@@ -52,6 +54,7 @@
#define HSICKCR 0xE615026C
#define M4CKCR 0xE6150098
#define PLLECR 0xE61500D0
+#define PLL0CR 0xE61500D8
#define PLL1CR 0xE6150028
#define PLL2CR 0xE615002C
#define PLL2SCR 0xE61501F4
@@ -177,6 +180,7 @@
.mapping = &cpg_mapping, \
}
+PLL_CLOCK(pll0_clk, &main_clk, pll_parent_main, 1, 20, PLL0CR, 0);
PLL_CLOCK(pll1_clk, &main_clk, pll_parent_main, 1, 7, PLL1CR, 1);
PLL_CLOCK(pll2_clk, &main_div2_clk, pll_parent_main_extal, 3, 5, PLL2CR, 2);
PLL_CLOCK(pll2s_clk, &main_div2_clk, pll_parent_main_extal, 3, 5, PLL2SCR, 4);
@@ -184,6 +188,157 @@
SH_FIXED_RATIO_CLK(pll1_div2_clk, pll1_clk, div2);
+static atomic_t frqcr_lock;
+
+/* Several clocks need to access FRQCRB, have to lock */
+static bool frqcr_kick_check(struct clk *clk)
+{
+ return !(ioread32(CPG_MAP(FRQCRB)) & BIT(31));
+}
+
+static int frqcr_kick_do(struct clk *clk)
+{
+ int i;
+
+ /* set KICK bit in FRQCRB to update hardware setting, check success */
+ iowrite32(ioread32(CPG_MAP(FRQCRB)) | BIT(31), CPG_MAP(FRQCRB));
+ for (i = 1000; i; i--)
+ if (ioread32(CPG_MAP(FRQCRB)) & BIT(31))
+ cpu_relax();
+ else
+ return 0;
+
+ return -ETIMEDOUT;
+}
+
+static int zclk_set_rate(struct clk *clk, unsigned long rate)
+{
+ void __iomem *frqcrc;
+ int ret;
+ unsigned long step, p_rate;
+ u32 val;
+
+ if (!clk->parent || !__clk_get(clk->parent))
+ return -ENODEV;
+
+ if (!atomic_inc_and_test(&frqcr_lock) || !frqcr_kick_check(clk)) {
+ ret = -EBUSY;
+ goto done;
+ }
+
+ /*
+ * Users are supposed to first call clk_set_rate() only with
+ * clk_round_rate() results. So, we don't fix wrong rates here, but
+ * guard against them anyway
+ */
+
+ p_rate = clk_get_rate(clk->parent);
+ if (rate == p_rate) {
+ val = 0;
+ } else {
+ step = DIV_ROUND_CLOSEST(p_rate, 32);
+
+ if (rate > p_rate || rate < step) {
+ ret = -EINVAL;
+ goto done;
+ }
+
+ val = 32 - rate / step;
+ }
+
+ frqcrc = clk->mapped_reg + (FRQCRC - (u32)clk->enable_reg);
+
+ iowrite32((ioread32(frqcrc) & ~(clk->div_mask << clk->enable_bit)) |
+ (val << clk->enable_bit), frqcrc);
+
+ ret = frqcr_kick_do(clk);
+
+done:
+ atomic_dec(&frqcr_lock);
+ __clk_put(clk->parent);
+ return ret;
+}
+
+static long zclk_round_rate(struct clk *clk, unsigned long rate)
+{
+ /*
+ * theoretical rate = parent rate * multiplier / 32,
+ * where 1 <= multiplier <= 32. Therefore we should do
+ * multiplier = rate * 32 / parent rate
+ * rounded rate = parent rate * multiplier / 32.
+ * However, multiplication before division won't fit in 32 bits, so
+ * we sacrifice some precision by first dividing and then multiplying.
+ * To find the nearest divisor we calculate both and pick up the best
+ * one. This avoids 64-bit arithmetics.
+ */
+ unsigned long step, mul_min, mul_max, rate_min, rate_max;
+
+ rate_max = clk_get_rate(clk->parent);
+
+ /* output freq <= parent */
+ if (rate >= rate_max)
+ return rate_max;
+
+ step = DIV_ROUND_CLOSEST(rate_max, 32);
+ /* output freq >= parent / 32 */
+ if (step >= rate)
+ return step;
+
+ mul_min = rate / step;
+ mul_max = DIV_ROUND_UP(rate, step);
+ rate_min = step * mul_min;
+ if (mul_max == mul_min)
+ return rate_min;
+
+ rate_max = step * mul_max;
+
+ if (rate_max - rate < rate - rate_min)
+ return rate_max;
+
+ return rate_min;
+}
+
+static unsigned long zclk_recalc(struct clk *clk)
+{
+ void __iomem *frqcrc = FRQCRC - (u32)clk->enable_reg + clk->mapped_reg;
+ unsigned int max = clk->div_mask + 1;
+ unsigned long val = ((ioread32(frqcrc) >> clk->enable_bit) &
+ clk->div_mask);
+
+ return DIV_ROUND_CLOSEST(clk_get_rate(clk->parent), max) *
+ (max - val);
+}
+
+static struct sh_clk_ops zclk_ops = {
+ .recalc = zclk_recalc,
+ .set_rate = zclk_set_rate,
+ .round_rate = zclk_round_rate,
+};
+
+static struct clk z_clk = {
+ .parent = &pll0_clk,
+ .div_mask = 0x1f,
+ .enable_bit = 8,
+ /* We'll need to access FRQCRB and FRQCRC */
+ .enable_reg = (void __iomem *)FRQCRB,
+ .ops = &zclk_ops,
+};
+
+/*
+ * It seems only 1/2 divider is usable in manual mode. 1/2 / 2/3
+ * switching is only available in auto-DVFS mode
+ */
+SH_FIXED_RATIO_CLK(pll0_div2_clk, pll0_clk, div2);
+
+static struct clk z2_clk = {
+ .parent = &pll0_div2_clk,
+ .div_mask = 0x1f,
+ .enable_bit = 0,
+ /* We'll need to access FRQCRB and FRQCRC */
+ .enable_reg = (void __iomem *)FRQCRB,
+ .ops = &zclk_ops,
+};
+
static struct clk *main_clks[] = {
&extalr_clk,
&extal1_clk,
@@ -195,22 +350,23 @@
&main_div2_clk,
&fsiack_clk,
&fsibck_clk,
+ &pll0_clk,
&pll1_clk,
&pll1_div2_clk,
&pll2_clk,
&pll2s_clk,
&pll2h_clk,
+ &z_clk,
+ &pll0_div2_clk,
+ &z2_clk,
};
/* DIV4 */
static void div4_kick(struct clk *clk)
{
- unsigned long value;
-
- /* set KICK bit in FRQCRB to update hardware setting */
- value = ioread32(CPG_MAP(FRQCRB));
- value |= (1 << 31);
- iowrite32(value, CPG_MAP(FRQCRB));
+ if (!WARN(!atomic_inc_and_test(&frqcr_lock), "FRQCR* lock broken!\n"))
+ frqcr_kick_do(clk);
+ atomic_dec(&frqcr_lock);
}
static int divisors[] = { 2, 3, 4, 6, 8, 12, 16, 18, 24, 0, 36, 48, 10};
@@ -349,8 +505,10 @@
/* MSTP */
enum {
MSTP217, MSTP216, MSTP207, MSTP206, MSTP204, MSTP203,
- MSTP315, MSTP314, MSTP313, MSTP312, MSTP305,
- MSTP522,
+ MSTP329, MSTP323, MSTP318, MSTP317, MSTP316,
+ MSTP315, MSTP314, MSTP313, MSTP312, MSTP305, MSTP300,
+ MSTP411, MSTP410, MSTP409,
+ MSTP522, MSTP515,
MSTP_NR
};
@@ -361,12 +519,22 @@
[MSTP207] = SH_CLK_MSTP32(&div6_clks[DIV6_MP], SMSTPCR2, 7, 0), /* SCIFB1 */
[MSTP216] = SH_CLK_MSTP32(&div6_clks[DIV6_MP], SMSTPCR2, 16, 0), /* SCIFB2 */
[MSTP217] = SH_CLK_MSTP32(&div6_clks[DIV6_MP], SMSTPCR2, 17, 0), /* SCIFB3 */
+ [MSTP300] = SH_CLK_MSTP32(&div4_clks[DIV4_HP], SMSTPCR3, 0, 0), /* IIC2 */
[MSTP305] = SH_CLK_MSTP32(&div6_clks[DIV6_MMC1],SMSTPCR3, 5, 0), /* MMCIF1 */
[MSTP312] = SH_CLK_MSTP32(&div6_clks[DIV6_SDHI2],SMSTPCR3, 12, 0), /* SDHI2 */
[MSTP313] = SH_CLK_MSTP32(&div6_clks[DIV6_SDHI1],SMSTPCR3, 13, 0), /* SDHI1 */
[MSTP314] = SH_CLK_MSTP32(&div6_clks[DIV6_SDHI0],SMSTPCR3, 14, 0), /* SDHI0 */
[MSTP315] = SH_CLK_MSTP32(&div6_clks[DIV6_MMC0],SMSTPCR3, 15, 0), /* MMCIF0 */
+ [MSTP316] = SH_CLK_MSTP32(&div4_clks[DIV4_HP], SMSTPCR3, 16, 0), /* IIC6 */
+ [MSTP317] = SH_CLK_MSTP32(&div4_clks[DIV4_HP], SMSTPCR3, 17, 0), /* IIC7 */
+ [MSTP318] = SH_CLK_MSTP32(&div4_clks[DIV4_HP], SMSTPCR3, 18, 0), /* IIC0 */
+ [MSTP323] = SH_CLK_MSTP32(&div4_clks[DIV4_HP], SMSTPCR3, 23, 0), /* IIC1 */
+ [MSTP329] = SH_CLK_MSTP32(&extalr_clk, SMSTPCR3, 29, 0), /* CMT10 */
+ [MSTP409] = SH_CLK_MSTP32(&main_div2_clk, SMSTPCR4, 9, 0), /* IIC5 */
+ [MSTP410] = SH_CLK_MSTP32(&div4_clks[DIV4_HP], SMSTPCR4, 10, 0), /* IIC4 */
+ [MSTP411] = SH_CLK_MSTP32(&div4_clks[DIV4_HP], SMSTPCR4, 11, 0), /* IIC3 */
[MSTP522] = SH_CLK_MSTP32(&extal2_clk, SMSTPCR5, 22, 0), /* Thermal */
+ [MSTP515] = SH_CLK_MSTP32(&div4_clks[DIV4_HP], SMSTPCR5, 15, 0), /* IIC8 */
};
static struct clk_lookup lookups[] = {
@@ -386,6 +554,9 @@
CLKDEV_CON_ID("pll2s", &pll2s_clk),
CLKDEV_CON_ID("pll2h", &pll2h_clk),
+ /* CPU clock */
+ CLKDEV_DEV_ID("cpufreq-cpu0", &z_clk),
+
/* DIV6 */
CLKDEV_CON_ID("zb", &div6_clks[DIV6_ZB]),
CLKDEV_CON_ID("vck1", &div6_clks[DIV6_VCK1]),
@@ -408,6 +579,7 @@
CLKDEV_DEV_ID("sh-sci.4", &mstp_clks[MSTP216]),
CLKDEV_DEV_ID("sh-sci.5", &mstp_clks[MSTP217]),
CLKDEV_DEV_ID("rcar_thermal", &mstp_clks[MSTP522]),
+ CLKDEV_DEV_ID("e6520000.i2c", &mstp_clks[MSTP300]),
CLKDEV_DEV_ID("sh_mmcif.1", &mstp_clks[MSTP305]),
CLKDEV_DEV_ID("ee220000.mmcif", &mstp_clks[MSTP305]),
CLKDEV_DEV_ID("sh_mobile_sdhi.2", &mstp_clks[MSTP312]),
@@ -418,6 +590,15 @@
CLKDEV_DEV_ID("ee100000.sdhi", &mstp_clks[MSTP314]),
CLKDEV_DEV_ID("sh_mmcif.0", &mstp_clks[MSTP315]),
CLKDEV_DEV_ID("ee200000.mmcif", &mstp_clks[MSTP315]),
+ CLKDEV_DEV_ID("e6550000.i2c", &mstp_clks[MSTP316]),
+ CLKDEV_DEV_ID("e6560000.i2c", &mstp_clks[MSTP317]),
+ CLKDEV_DEV_ID("e6500000.i2c", &mstp_clks[MSTP318]),
+ CLKDEV_DEV_ID("e6510000.i2c", &mstp_clks[MSTP323]),
+ CLKDEV_DEV_ID("sh_cmt.10", &mstp_clks[MSTP329]),
+ CLKDEV_DEV_ID("e60b0000.i2c", &mstp_clks[MSTP409]),
+ CLKDEV_DEV_ID("e6540000.i2c", &mstp_clks[MSTP410]),
+ CLKDEV_DEV_ID("e6530000.i2c", &mstp_clks[MSTP411]),
+ CLKDEV_DEV_ID("e6570000.i2c", &mstp_clks[MSTP515]),
/* for DT */
CLKDEV_DEV_ID("e61f0000.thermal", &mstp_clks[MSTP522]),
@@ -429,6 +610,8 @@
int k, ret = 0;
u32 ckscr;
+ atomic_set(&frqcr_lock, -1);
+
reg = ioremap_nocache(CKSCR, PAGE_SIZE);
BUG_ON(!reg);
ckscr = ioread32(reg);
diff --git a/arch/arm/mach-shmobile/clock-r8a7740.c b/arch/arm/mach-shmobile/clock-r8a7740.c
index f4265e5..c826bca 100644
--- a/arch/arm/mach-shmobile/clock-r8a7740.c
+++ b/arch/arm/mach-shmobile/clock-r8a7740.c
@@ -597,6 +597,7 @@
CLKDEV_DEV_ID("r8a7740-gether", &mstp_clks[MSTP309]),
CLKDEV_DEV_ID("e9a00000.sh-eth", &mstp_clks[MSTP309]),
CLKDEV_DEV_ID("renesas-tpu-pwm", &mstp_clks[MSTP304]),
+ CLKDEV_DEV_ID("e6600000.pwm", &mstp_clks[MSTP304]),
CLKDEV_DEV_ID("sh_mobile_sdhi.2", &mstp_clks[MSTP415]),
CLKDEV_DEV_ID("e6870000.sdhi", &mstp_clks[MSTP415]),
diff --git a/arch/arm/mach-shmobile/clock-r8a7790.c b/arch/arm/mach-shmobile/clock-r8a7790.c
index 5d71313..fc36d3d 100644
--- a/arch/arm/mach-shmobile/clock-r8a7790.c
+++ b/arch/arm/mach-shmobile/clock-r8a7790.c
@@ -24,6 +24,7 @@
#include <linux/clkdev.h>
#include <mach/clock.h>
#include <mach/common.h>
+#include <mach/r8a7790.h>
/*
* MD EXTAL PLL0 PLL1 PLL3
@@ -42,16 +43,16 @@
* see "p1 / 2" on R8A7790_CLOCK_ROOT() below
*/
-#define MD(nr) (1 << nr)
-
#define CPG_BASE 0xe6150000
#define CPG_LEN 0x1000
+#define SMSTPCR1 0xe6150134
#define SMSTPCR2 0xe6150138
#define SMSTPCR3 0xe615013c
+#define SMSTPCR5 0xe6150144
#define SMSTPCR7 0xe615014c
+#define SMSTPCR8 0xe6150990
-#define MODEMR 0xE6160060
#define SDCKCR 0xE6150074
#define SD2CKCR 0xE6150078
#define SD3CKCR 0xE615007C
@@ -180,16 +181,23 @@
/* MSTP */
enum {
+ MSTP813,
MSTP721, MSTP720,
MSTP717, MSTP716,
+ MSTP522,
MSTP315, MSTP314, MSTP313, MSTP312, MSTP311, MSTP305, MSTP304,
MSTP216, MSTP207, MSTP206, MSTP204, MSTP203, MSTP202,
+ MSTP124,
MSTP_NR
};
static struct clk mstp_clks[MSTP_NR] = {
+ [MSTP813] = SH_CLK_MSTP32(&p_clk, SMSTPCR8, 13, 0), /* Ether */
[MSTP721] = SH_CLK_MSTP32(&p_clk, SMSTPCR7, 21, 0), /* SCIF0 */
[MSTP720] = SH_CLK_MSTP32(&p_clk, SMSTPCR7, 20, 0), /* SCIF1 */
+ [MSTP717] = SH_CLK_MSTP32(&zs_clk, SMSTPCR7, 17, 0), /* HSCIF0 */
+ [MSTP716] = SH_CLK_MSTP32(&zs_clk, SMSTPCR7, 16, 0), /* HSCIF1 */
+ [MSTP522] = SH_CLK_MSTP32(&extal_clk, SMSTPCR5, 22, 0), /* Thermal */
[MSTP315] = SH_CLK_MSTP32(&div6_clks[DIV6_MMC0], SMSTPCR3, 15, 0), /* MMC0 */
[MSTP314] = SH_CLK_MSTP32(&div4_clks[DIV4_SD0], SMSTPCR3, 14, 0), /* SDHI0 */
[MSTP313] = SH_CLK_MSTP32(&div4_clks[DIV4_SD1], SMSTPCR3, 13, 0), /* SDHI1 */
@@ -203,8 +211,7 @@
[MSTP204] = SH_CLK_MSTP32(&mp_clk, SMSTPCR2, 4, 0), /* SCIFA0 */
[MSTP203] = SH_CLK_MSTP32(&mp_clk, SMSTPCR2, 3, 0), /* SCIFA1 */
[MSTP202] = SH_CLK_MSTP32(&mp_clk, SMSTPCR2, 2, 0), /* SCIFA2 */
- [MSTP717] = SH_CLK_MSTP32(&zs_clk, SMSTPCR7, 17, 0), /* HSCIF0 */
- [MSTP716] = SH_CLK_MSTP32(&zs_clk, SMSTPCR7, 16, 0), /* HSCIF1 */
+ [MSTP124] = SH_CLK_MSTP32(&rclk_clk, SMSTPCR1, 24, 0), /* CMT0 */
};
static struct clk_lookup lookups[] = {
@@ -254,6 +261,8 @@
CLKDEV_DEV_ID("sh-sci.7", &mstp_clks[MSTP720]),
CLKDEV_DEV_ID("sh-sci.8", &mstp_clks[MSTP717]),
CLKDEV_DEV_ID("sh-sci.9", &mstp_clks[MSTP716]),
+ CLKDEV_DEV_ID("r8a7790-ether", &mstp_clks[MSTP813]),
+ CLKDEV_DEV_ID("rcar_thermal", &mstp_clks[MSTP522]),
CLKDEV_DEV_ID("ee200000.mmcif", &mstp_clks[MSTP315]),
CLKDEV_DEV_ID("sh_mmcif.0", &mstp_clks[MSTP315]),
CLKDEV_DEV_ID("ee100000.sdhi", &mstp_clks[MSTP314]),
@@ -266,6 +275,7 @@
CLKDEV_DEV_ID("sh_mobile_sdhi.3", &mstp_clks[MSTP311]),
CLKDEV_DEV_ID("ee220000.mmcif", &mstp_clks[MSTP305]),
CLKDEV_DEV_ID("sh_mmcif.1", &mstp_clks[MSTP305]),
+ CLKDEV_DEV_ID("sh_cmt.0", &mstp_clks[MSTP124]),
};
#define R8A7790_CLOCK_ROOT(e, m, p0, p1, p30, p31) \
@@ -280,14 +290,9 @@
void __init r8a7790_clock_init(void)
{
- void __iomem *modemr = ioremap_nocache(MODEMR, PAGE_SIZE);
- u32 mode;
+ u32 mode = r8a7790_read_mode_pins();
int k, ret = 0;
- BUG_ON(!modemr);
- mode = ioread32(modemr);
- iounmap(modemr);
-
switch (mode & (MD(14) | MD(13))) {
case 0:
R8A7790_CLOCK_ROOT(15, &extal_clk, 172, 208, 106, 88);
diff --git a/arch/arm/mach-shmobile/include/mach/emev2.h b/arch/arm/mach-shmobile/include/mach/emev2.h
index b0ab4b7..c2eb756 100644
--- a/arch/arm/mach-shmobile/include/mach/emev2.h
+++ b/arch/arm/mach-shmobile/include/mach/emev2.h
@@ -5,7 +5,6 @@
extern void emev2_init_delay(void);
extern void emev2_add_standard_devices(void);
extern void emev2_clock_init(void);
-extern void emev2_set_boot_vector(unsigned long value);
#define EMEV2_GPIO_BASE 200
#define EMEV2_GPIO_IRQ(n) (EMEV2_GPIO_BASE + (n))
diff --git a/arch/arm/mach-shmobile/include/mach/r8a73a4.h b/arch/arm/mach-shmobile/include/mach/r8a73a4.h
index f043103..144a85e 100644
--- a/arch/arm/mach-shmobile/include/mach/r8a73a4.h
+++ b/arch/arm/mach-shmobile/include/mach/r8a73a4.h
@@ -4,5 +4,6 @@
void r8a73a4_add_standard_devices(void);
void r8a73a4_clock_init(void);
void r8a73a4_pinmux_init(void);
+void r8a73a4_init_delay(void);
#endif /* __ASM_R8A73A4_H__ */
diff --git a/arch/arm/mach-shmobile/include/mach/r8a7740.h b/arch/arm/mach-shmobile/include/mach/r8a7740.h
index b34d19b..56f3750 100644
--- a/arch/arm/mach-shmobile/include/mach/r8a7740.h
+++ b/arch/arm/mach-shmobile/include/mach/r8a7740.h
@@ -42,6 +42,8 @@
SHDMA_SLAVE_FSIB_TX,
SHDMA_SLAVE_USBHS_TX,
SHDMA_SLAVE_USBHS_RX,
+ SHDMA_SLAVE_MMCIF_TX,
+ SHDMA_SLAVE_MMCIF_RX,
};
extern void r8a7740_meram_workaround(void);
diff --git a/arch/arm/mach-shmobile/include/mach/r8a7790.h b/arch/arm/mach-shmobile/include/mach/r8a7790.h
index 2e919e6..7aaef40 100644
--- a/arch/arm/mach-shmobile/include/mach/r8a7790.h
+++ b/arch/arm/mach-shmobile/include/mach/r8a7790.h
@@ -4,6 +4,10 @@
void r8a7790_add_standard_devices(void);
void r8a7790_clock_init(void);
void r8a7790_pinmux_init(void);
+void r8a7790_init_delay(void);
void r8a7790_timer_init(void);
+#define MD(nr) BIT(nr)
+u32 r8a7790_read_mode_pins(void);
+
#endif /* __ASM_R8A7790_H__ */
diff --git a/arch/arm/mach-shmobile/setup-r8a73a4.c b/arch/arm/mach-shmobile/setup-r8a73a4.c
index a8c4e41..d533bd2 100644
--- a/arch/arm/mach-shmobile/setup-r8a73a4.c
+++ b/arch/arm/mach-shmobile/setup-r8a73a4.c
@@ -22,6 +22,7 @@
#include <linux/of_platform.h>
#include <linux/platform_data/irq-renesas-irqc.h>
#include <linux/serial_sci.h>
+#include <linux/sh_timer.h>
#include <mach/common.h>
#include <mach/irqs.h>
#include <mach/r8a73a4.h>
@@ -168,6 +169,25 @@
thermal0_resources, \
ARRAY_SIZE(thermal0_resources))
+static struct sh_timer_config cmt10_platform_data = {
+ .name = "CMT10",
+ .timer_bit = 0,
+ .clockevent_rating = 80,
+};
+
+static struct resource cmt10_resources[] = {
+ DEFINE_RES_MEM(0xe6130010, 0x0c),
+ DEFINE_RES_MEM(0xe6130000, 0x04),
+ DEFINE_RES_IRQ(gic_spi(120)), /* CMT1_0 */
+};
+
+#define r8a7790_register_cmt(idx) \
+ platform_device_register_resndata(&platform_bus, "sh_cmt", \
+ idx, cmt##idx##_resources, \
+ ARRAY_SIZE(cmt##idx##_resources), \
+ &cmt##idx##_platform_data, \
+ sizeof(struct sh_timer_config))
+
void __init r8a73a4_add_standard_devices(void)
{
r8a73a4_register_scif(SCIFA0);
@@ -179,11 +199,20 @@
r8a73a4_register_irqc(0);
r8a73a4_register_irqc(1);
r8a73a4_register_thermal();
+ r8a7790_register_cmt(10);
+}
+
+void __init r8a73a4_init_delay(void)
+{
+#ifndef CONFIG_ARM_ARCH_TIMER
+ shmobile_setup_delay(1500, 2, 4); /* Cortex-A15 @ 1500MHz */
+#endif
}
#ifdef CONFIG_USE_OF
void __init r8a73a4_add_standard_devices_dt(void)
{
+ platform_device_register_simple("cpufreq-cpu0", -1, NULL, 0);
of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
}
@@ -193,6 +222,7 @@
};
DT_MACHINE_START(R8A73A4_DT, "Generic R8A73A4 (Flattened Device Tree)")
+ .init_early = r8a73a4_init_delay,
.init_machine = r8a73a4_add_standard_devices_dt,
.init_time = shmobile_timer_init,
.dt_compat = r8a73a4_boards_compat_dt,
diff --git a/arch/arm/mach-shmobile/setup-r8a7740.c b/arch/arm/mach-shmobile/setup-r8a7740.c
index ac29c2e..84c5bb6 100644
--- a/arch/arm/mach-shmobile/setup-r8a7740.c
+++ b/arch/arm/mach-shmobile/setup-r8a7740.c
@@ -588,6 +588,16 @@
.addr = 0xfe1f0064,
.chcr = CHCR_TX(XMIT_SZ_32BIT),
.mid_rid = 0xb5,
+ }, {
+ .slave_id = SHDMA_SLAVE_MMCIF_TX,
+ .addr = 0xe6bd0034,
+ .chcr = CHCR_TX(XMIT_SZ_32BIT),
+ .mid_rid = 0xd1,
+ }, {
+ .slave_id = SHDMA_SLAVE_MMCIF_RX,
+ .addr = 0xe6bd0034,
+ .chcr = CHCR_RX(XMIT_SZ_32BIT),
+ .mid_rid = 0xd2,
},
};
diff --git a/arch/arm/mach-shmobile/setup-r8a7790.c b/arch/arm/mach-shmobile/setup-r8a7790.c
index b7e78b9..4c96dad 100644
--- a/arch/arm/mach-shmobile/setup-r8a7790.c
+++ b/arch/arm/mach-shmobile/setup-r8a7790.c
@@ -21,9 +21,10 @@
#include <linux/irq.h>
#include <linux/kernel.h>
#include <linux/of_platform.h>
-#include <linux/serial_sci.h>
#include <linux/platform_data/gpio-rcar.h>
#include <linux/platform_data/irq-renesas-irqc.h>
+#include <linux/serial_sci.h>
+#include <linux/sh_timer.h>
#include <mach/common.h>
#include <mach/irqs.h>
#include <mach/r8a7790.h>
@@ -148,6 +149,36 @@
&irqc##idx##_data, \
sizeof(struct renesas_irqc_config))
+static struct resource thermal_resources[] __initdata = {
+ DEFINE_RES_MEM(0xe61f0000, 0x14),
+ DEFINE_RES_MEM(0xe61f0100, 0x38),
+ DEFINE_RES_IRQ(gic_spi(69)),
+};
+
+#define r8a7790_register_thermal() \
+ platform_device_register_simple("rcar_thermal", -1, \
+ thermal_resources, \
+ ARRAY_SIZE(thermal_resources))
+
+static struct sh_timer_config cmt00_platform_data = {
+ .name = "CMT00",
+ .timer_bit = 0,
+ .clockevent_rating = 80,
+};
+
+static struct resource cmt00_resources[] = {
+ DEFINE_RES_MEM(0xffca0510, 0x0c),
+ DEFINE_RES_MEM(0xffca0500, 0x04),
+ DEFINE_RES_IRQ(gic_spi(142)), /* CMT0_0 */
+};
+
+#define r8a7790_register_cmt(idx) \
+ platform_device_register_resndata(&platform_bus, "sh_cmt", \
+ idx, cmt##idx##_resources, \
+ ARRAY_SIZE(cmt##idx##_resources), \
+ &cmt##idx##_platform_data, \
+ sizeof(struct sh_timer_config))
+
void __init r8a7790_add_standard_devices(void)
{
r8a7790_register_scif(SCIFA0);
@@ -161,20 +192,82 @@
r8a7790_register_scif(HSCIF0);
r8a7790_register_scif(HSCIF1);
r8a7790_register_irqc(0);
+ r8a7790_register_thermal();
+ r8a7790_register_cmt(00);
}
+#define MODEMR 0xe6160060
+
+u32 __init r8a7790_read_mode_pins(void)
+{
+ void __iomem *modemr = ioremap_nocache(MODEMR, 4);
+ u32 mode;
+
+ BUG_ON(!modemr);
+ mode = ioread32(modemr);
+ iounmap(modemr);
+
+ return mode;
+}
+
+#define CNTCR 0
+#define CNTFID0 0x20
+
void __init r8a7790_timer_init(void)
{
- void __iomem *cntcr;
+#ifdef CONFIG_ARM_ARCH_TIMER
+ u32 mode = r8a7790_read_mode_pins();
+ void __iomem *base;
+ int extal_mhz = 0;
+ u32 freq;
- /* make sure arch timer is started by setting bit 0 of CNTCT */
- cntcr = ioremap(0xe6080000, PAGE_SIZE);
- iowrite32(1, cntcr);
- iounmap(cntcr);
+ /* At Linux boot time the r8a7790 arch timer comes up
+ * with the counter disabled. Moreover, it may also report
+ * a potentially incorrect fixed 13 MHz frequency. To be
+ * correct these registers need to be updated to use the
+ * frequency EXTAL / 2 which can be determined by the MD pins.
+ */
+
+ switch (mode & (MD(14) | MD(13))) {
+ case 0:
+ extal_mhz = 15;
+ break;
+ case MD(13):
+ extal_mhz = 20;
+ break;
+ case MD(14):
+ extal_mhz = 26;
+ break;
+ case MD(13) | MD(14):
+ extal_mhz = 30;
+ break;
+ }
+
+ /* The arch timer frequency equals EXTAL / 2 */
+ freq = extal_mhz * (1000000 / 2);
+
+ /* Remap "armgcnt address map" space */
+ base = ioremap(0xe6080000, PAGE_SIZE);
+
+ /* Update registers with correct frequency */
+ iowrite32(freq, base + CNTFID0);
+ asm volatile("mcr p15, 0, %0, c14, c0, 0" : : "r" (freq));
+
+ /* make sure arch timer is started by setting bit 0 of CNTCR */
+ iowrite32(1, base + CNTCR);
+ iounmap(base);
+#endif /* CONFIG_ARM_ARCH_TIMER */
shmobile_timer_init();
}
+void __init r8a7790_init_delay(void)
+{
+#ifndef CONFIG_ARM_ARCH_TIMER
+ shmobile_setup_delay(1300, 2, 4); /* Cortex-A15 @ 1300MHz */
+#endif
+}
+
#ifdef CONFIG_USE_OF
static const char *r8a7790_boards_compat_dt[] __initdata = {
@@ -183,6 +276,7 @@
};
DT_MACHINE_START(R8A7790_DT, "Generic R8A7790 (Flattened Device Tree)")
+ .init_early = r8a7790_init_delay,
.init_time = r8a7790_timer_init,
.dt_compat = r8a7790_boards_compat_dt,
MACHINE_END
diff --git a/arch/arm/mach-shmobile/smp-emev2.c b/arch/arm/mach-shmobile/smp-emev2.c
index 1fcd607..78e84c5 100644
--- a/arch/arm/mach-shmobile/smp-emev2.c
+++ b/arch/arm/mach-shmobile/smp-emev2.c
@@ -29,6 +29,8 @@
#include <asm/smp_scu.h>
#define EMEV2_SCU_BASE 0x1e000000
+#define EMEV2_SMU_BASE 0xe0110000
+#define SMU_GENERAL_REG0 0x7c0
static int emev2_boot_secondary(unsigned int cpu, struct task_struct *idle)
{
@@ -38,13 +40,18 @@
static void __init emev2_smp_prepare_cpus(unsigned int max_cpus)
{
+ void __iomem *smu;
+
/* setup EMEV2 specific SCU base, enable */
shmobile_scu_base = ioremap(EMEV2_SCU_BASE, PAGE_SIZE);
scu_enable(shmobile_scu_base);
/* Tell ROM loader about our vector (in headsmp-scu.S, headsmp.S) */
- emev2_clock_init(); /* need ioremapped SMU */
- emev2_set_boot_vector(__pa(shmobile_boot_vector));
+ smu = ioremap(EMEV2_SMU_BASE, PAGE_SIZE);
+ if (smu) {
+ iowrite32(__pa(shmobile_boot_vector), smu + SMU_GENERAL_REG0);
+ iounmap(smu);
+ }
shmobile_boot_fn = virt_to_phys(shmobile_boot_scu);
shmobile_boot_arg = (unsigned long)shmobile_scu_base;
diff --git a/arch/arm/mach-sunxi/Kconfig b/arch/arm/mach-sunxi/Kconfig
index 5b045e3..3ab2f65 100644
--- a/arch/arm/mach-sunxi/Kconfig
+++ b/arch/arm/mach-sunxi/Kconfig
@@ -10,3 +10,5 @@
select SPARSE_IRQ
select SUN4I_TIMER
select PINCTRL_SUNXI
+ select ARM_GIC
+ select HAVE_SMP
diff --git a/arch/arm/mach-sunxi/Makefile.boot b/arch/arm/mach-sunxi/Makefile.boot
deleted file mode 100644
index 46d4cf0..0000000
--- a/arch/arm/mach-sunxi/Makefile.boot
+++ /dev/null
@@ -1 +0,0 @@
-zreladdr-$(CONFIG_ARCH_SUNXI) += 0x40008000
diff --git a/arch/arm/mach-sunxi/sunxi.c b/arch/arm/mach-sunxi/sunxi.c
index 38a3c55..e79fb34 100644
--- a/arch/arm/mach-sunxi/sunxi.c
+++ b/arch/arm/mach-sunxi/sunxi.c
@@ -27,10 +27,19 @@
#include <asm/system_misc.h>
#define SUN4I_WATCHDOG_CTRL_REG 0x00
-#define SUN4I_WATCHDOG_CTRL_RESTART (1 << 0)
+#define SUN4I_WATCHDOG_CTRL_RESTART BIT(0)
#define SUN4I_WATCHDOG_MODE_REG 0x04
-#define SUN4I_WATCHDOG_MODE_ENABLE (1 << 0)
-#define SUN4I_WATCHDOG_MODE_RESET_ENABLE (1 << 1)
+#define SUN4I_WATCHDOG_MODE_ENABLE BIT(0)
+#define SUN4I_WATCHDOG_MODE_RESET_ENABLE BIT(1)
+
+#define SUN6I_WATCHDOG1_IRQ_REG 0x00
+#define SUN6I_WATCHDOG1_CTRL_REG 0x10
+#define SUN6I_WATCHDOG1_CTRL_RESTART BIT(0)
+#define SUN6I_WATCHDOG1_CONFIG_REG 0x14
+#define SUN6I_WATCHDOG1_CONFIG_RESTART BIT(0)
+#define SUN6I_WATCHDOG1_CONFIG_IRQ BIT(1)
+#define SUN6I_WATCHDOG1_MODE_REG 0x18
+#define SUN6I_WATCHDOG1_MODE_ENABLE BIT(0)
static void __iomem *wdt_base;
@@ -56,8 +65,36 @@
}
}
+static void sun6i_restart(enum reboot_mode mode, const char *cmd)
+{
+ if (!wdt_base)
+ return;
+
+ /* Disable interrupts */
+ writel(0, wdt_base + SUN6I_WATCHDOG1_IRQ_REG);
+
+ /* We want to disable the IRQ and just reset the whole system */
+ writel(SUN6I_WATCHDOG1_CONFIG_RESTART,
+ wdt_base + SUN6I_WATCHDOG1_CONFIG_REG);
+
+ /* Enable timer. The default and lowest interval value is 0.5s */
+ writel(SUN6I_WATCHDOG1_MODE_ENABLE,
+ wdt_base + SUN6I_WATCHDOG1_MODE_REG);
+
+ /* Restart the watchdog. */
+ writel(SUN6I_WATCHDOG1_CTRL_RESTART,
+ wdt_base + SUN6I_WATCHDOG1_CTRL_REG);
+
+ while (1) {
+ mdelay(5);
+ writel(SUN6I_WATCHDOG1_MODE_ENABLE,
+ wdt_base + SUN6I_WATCHDOG1_MODE_REG);
+ }
+}
+
static struct of_device_id sunxi_restart_ids[] = {
{ .compatible = "allwinner,sun4i-wdt", .data = sun4i_restart },
+ { .compatible = "allwinner,sun6i-wdt", .data = sun6i_restart },
{ /*sentinel*/ }
};
@@ -96,6 +133,8 @@
"allwinner,sun4i-a10",
"allwinner,sun5i-a10s",
"allwinner,sun5i-a13",
+ "allwinner,sun6i-a31",
+ "allwinner,sun7i-a20",
NULL,
};
diff --git a/arch/arm/mach-tegra/Kconfig b/arch/arm/mach-tegra/Kconfig
index 59925cc..67a76f2 100644
--- a/arch/arm/mach-tegra/Kconfig
+++ b/arch/arm/mach-tegra/Kconfig
@@ -2,18 +2,25 @@
bool "NVIDIA Tegra" if ARCH_MULTI_V7
select ARCH_HAS_CPUFREQ
select ARCH_REQUIRE_GPIOLIB
+ select ARM_GIC
select CLKDEV_LOOKUP
select CLKSRC_MMIO
select CLKSRC_OF
select COMMON_CLK
+ select CPU_V7
select GENERIC_CLOCKEVENTS
select HAVE_ARM_SCU if SMP
select HAVE_ARM_TWD if SMP
select HAVE_CLK
select HAVE_SMP
select MIGHT_HAVE_CACHE_L2X0
+ select MIGHT_HAVE_PCI
+ select PINCTRL
select SOC_BUS
select SPARSE_IRQ
+ select USB_ARCH_HAS_EHCI if USB_SUPPORT
+ select USB_ULPI if USB_PHY
+ select USB_ULPI_VIEWPORT if USB_PHY
select USE_OF
help
This enables support for NVIDIA Tegra based systems.
@@ -27,15 +34,9 @@
select ARM_ERRATA_720789
select ARM_ERRATA_754327 if SMP
select ARM_ERRATA_764369 if SMP
- select ARM_GIC
- select CPU_V7
- select PINCTRL
select PINCTRL_TEGRA20
select PL310_ERRATA_727915 if CACHE_L2X0
select PL310_ERRATA_769419 if CACHE_L2X0
- select USB_ARCH_HAS_EHCI if USB_SUPPORT
- select USB_ULPI if USB_PHY
- select USB_ULPI_VIEWPORT if USB_PHY
help
Support for NVIDIA Tegra AP20 and T20 processors, based on the
ARM CortexA9MP CPU and the ARM PL310 L2 cache controller
@@ -44,14 +45,8 @@
bool "Enable support for Tegra30 family"
select ARM_ERRATA_754322
select ARM_ERRATA_764369 if SMP
- select ARM_GIC
- select CPU_V7
- select PINCTRL
select PINCTRL_TEGRA30
select PL310_ERRATA_769419 if CACHE_L2X0
- select USB_ARCH_HAS_EHCI if USB_SUPPORT
- select USB_ULPI if USB_PHY
- select USB_ULPI_VIEWPORT if USB_PHY
help
Support for NVIDIA Tegra T30 processor family, based on the
ARM CortexA9MP CPU and the ARM PL310 L2 cache controller
@@ -59,20 +54,13 @@
config ARCH_TEGRA_114_SOC
bool "Enable support for Tegra114 family"
select HAVE_ARM_ARCH_TIMER
- select ARM_GIC
+ select ARM_ERRATA_798181
select ARM_L1_CACHE_SHIFT_6
- select CPU_V7
- select PINCTRL
select PINCTRL_TEGRA114
help
Support for NVIDIA Tegra T114 processor family, based on the
ARM CortexA15MP CPU
-config TEGRA_PCI
- bool "PCI Express support"
- depends on ARCH_TEGRA_2x_SOC
- select PCI
-
config TEGRA_AHB
bool "Enable AHB driver for NVIDIA Tegra SoCs"
default y
diff --git a/arch/arm/mach-tegra/Makefile b/arch/arm/mach-tegra/Makefile
index 98b184e..e7e5f45 100644
--- a/arch/arm/mach-tegra/Makefile
+++ b/arch/arm/mach-tegra/Makefile
@@ -17,24 +17,24 @@
obj-$(CONFIG_ARCH_TEGRA_2x_SOC) += tegra20_speedo.o
obj-$(CONFIG_ARCH_TEGRA_2x_SOC) += tegra2_emc.o
obj-$(CONFIG_ARCH_TEGRA_2x_SOC) += sleep-tegra20.o
+obj-$(CONFIG_ARCH_TEGRA_2x_SOC) += pm-tegra20.o
ifeq ($(CONFIG_CPU_IDLE),y)
obj-$(CONFIG_ARCH_TEGRA_2x_SOC) += cpuidle-tegra20.o
endif
obj-$(CONFIG_ARCH_TEGRA_3x_SOC) += tegra30_speedo.o
obj-$(CONFIG_ARCH_TEGRA_3x_SOC) += sleep-tegra30.o
+obj-$(CONFIG_ARCH_TEGRA_3x_SOC) += pm-tegra30.o
ifeq ($(CONFIG_CPU_IDLE),y)
obj-$(CONFIG_ARCH_TEGRA_3x_SOC) += cpuidle-tegra30.o
endif
obj-$(CONFIG_SMP) += platsmp.o headsmp.o
obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o
-obj-$(CONFIG_TEGRA_PCI) += pcie.o
obj-$(CONFIG_ARCH_TEGRA_114_SOC) += tegra114_speedo.o
obj-$(CONFIG_ARCH_TEGRA_114_SOC) += sleep-tegra30.o
+obj-$(CONFIG_ARCH_TEGRA_114_SOC) += pm-tegra30.o
ifeq ($(CONFIG_CPU_IDLE),y)
obj-$(CONFIG_ARCH_TEGRA_114_SOC) += cpuidle-tegra114.o
endif
-obj-$(CONFIG_ARCH_TEGRA_2x_SOC) += board-harmony-pcie.o
-
obj-$(CONFIG_ARCH_TEGRA_2x_SOC) += board-paz00.o
diff --git a/arch/arm/mach-tegra/board-harmony-pcie.c b/arch/arm/mach-tegra/board-harmony-pcie.c
deleted file mode 100644
index 035b240..0000000
--- a/arch/arm/mach-tegra/board-harmony-pcie.c
+++ /dev/null
@@ -1,89 +0,0 @@
-/*
- * arch/arm/mach-tegra/board-harmony-pcie.c
- *
- * Copyright (C) 2010 CompuLab, Ltd.
- * Mike Rapoport <mike@compulab.co.il>
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/gpio.h>
-#include <linux/err.h>
-#include <linux/of_gpio.h>
-#include <linux/regulator/consumer.h>
-
-#include <asm/mach-types.h>
-
-#include "board.h"
-
-#ifdef CONFIG_TEGRA_PCI
-
-int __init harmony_pcie_init(void)
-{
- struct device_node *np;
- int en_vdd_1v05;
- struct regulator *regulator = NULL;
- int err;
-
- np = of_find_node_by_path("/regulators/regulator@3");
- if (!np) {
- pr_err("%s: of_find_node_by_path failed\n", __func__);
- return -ENODEV;
- }
-
- en_vdd_1v05 = of_get_named_gpio(np, "gpio", 0);
- if (en_vdd_1v05 < 0) {
- pr_err("%s: of_get_named_gpio failed: %d\n", __func__,
- en_vdd_1v05);
- return en_vdd_1v05;
- }
-
- err = gpio_request(en_vdd_1v05, "EN_VDD_1V05");
- if (err) {
- pr_err("%s: gpio_request failed: %d\n", __func__, err);
- return err;
- }
-
- gpio_direction_output(en_vdd_1v05, 1);
-
- regulator = regulator_get(NULL, "vdd_ldo0,vddio_pex_clk");
- if (IS_ERR(regulator)) {
- err = PTR_ERR(regulator);
- pr_err("%s: regulator_get failed: %d\n", __func__, err);
- goto err_reg;
- }
-
- err = regulator_enable(regulator);
- if (err) {
- pr_err("%s: regulator_enable failed: %d\n", __func__, err);
- goto err_en;
- }
-
- err = tegra_pcie_init(true, true);
- if (err) {
- pr_err("%s: tegra_pcie_init failed: %d\n", __func__, err);
- goto err_pcie;
- }
-
- return 0;
-
-err_pcie:
- regulator_disable(regulator);
-err_en:
- regulator_put(regulator);
-err_reg:
- gpio_free(en_vdd_1v05);
-
- return err;
-}
-
-#endif
diff --git a/arch/arm/mach-tegra/board.h b/arch/arm/mach-tegra/board.h
index 9a6659f..db6810d 100644
--- a/arch/arm/mach-tegra/board.h
+++ b/arch/arm/mach-tegra/board.h
@@ -31,7 +31,6 @@
void __init tegra_map_common_io(void);
void __init tegra_init_irq(void);
void __init tegra_dt_init_irq(void);
-int __init tegra_pcie_init(bool init_port0, bool init_port1);
void tegra_init_late(void);
@@ -48,13 +47,6 @@
static inline int tegra_powergate_debugfs_init(void) { return 0; }
#endif
-int __init harmony_regulator_init(void);
-#ifdef CONFIG_TEGRA_PCI
-int __init harmony_pcie_init(void);
-#else
-static inline int harmony_pcie_init(void) { return 0; }
-#endif
-
void __init tegra_paz00_wifikill_init(void);
#endif
diff --git a/arch/arm/mach-tegra/common.h b/arch/arm/mach-tegra/common.h
index 32f8eb3..5900cc4 100644
--- a/arch/arm/mach-tegra/common.h
+++ b/arch/arm/mach-tegra/common.h
@@ -2,4 +2,3 @@
extern int tegra_cpu_kill(unsigned int cpu);
extern void tegra_cpu_die(unsigned int cpu);
-extern int tegra_cpu_disable(unsigned int cpu);
diff --git a/arch/arm/mach-tegra/cpuidle-tegra114.c b/arch/arm/mach-tegra/cpuidle-tegra114.c
index 1d1c602..e0b8730 100644
--- a/arch/arm/mach-tegra/cpuidle-tegra114.c
+++ b/arch/arm/mach-tegra/cpuidle-tegra114.c
@@ -17,15 +17,64 @@
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/cpuidle.h>
+#include <linux/cpu_pm.h>
+#include <linux/clockchips.h>
#include <asm/cpuidle.h>
+#include <asm/suspend.h>
+#include <asm/smp_plat.h>
+
+#include "pm.h"
+#include "sleep.h"
+
+#ifdef CONFIG_PM_SLEEP
+#define TEGRA114_MAX_STATES 2
+#else
+#define TEGRA114_MAX_STATES 1
+#endif
+
+#ifdef CONFIG_PM_SLEEP
+static int tegra114_idle_power_down(struct cpuidle_device *dev,
+ struct cpuidle_driver *drv,
+ int index)
+{
+ local_fiq_disable();
+
+ tegra_set_cpu_in_lp2();
+ cpu_pm_enter();
+
+ clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_ENTER, &dev->cpu);
+
+ cpu_suspend(0, tegra30_sleep_cpu_secondary_finish);
+
+ clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_EXIT, &dev->cpu);
+
+ cpu_pm_exit();
+ tegra_clear_cpu_in_lp2();
+
+ local_fiq_enable();
+
+ return index;
+}
+#endif
static struct cpuidle_driver tegra_idle_driver = {
.name = "tegra_idle",
.owner = THIS_MODULE,
- .state_count = 1,
+ .state_count = TEGRA114_MAX_STATES,
.states = {
[0] = ARM_CPUIDLE_WFI_STATE_PWR(600),
+#ifdef CONFIG_PM_SLEEP
+ [1] = {
+ .enter = tegra114_idle_power_down,
+ .exit_latency = 500,
+ .target_residency = 1000,
+ .power_usage = 0,
+ .flags = CPUIDLE_FLAG_TIME_VALID,
+ .name = "powered-down",
+ .desc = "CPU power gated",
+ },
+#endif
},
};
diff --git a/arch/arm/mach-tegra/cpuidle-tegra20.c b/arch/arm/mach-tegra/cpuidle-tegra20.c
index 706aa42..b82dcae 100644
--- a/arch/arm/mach-tegra/cpuidle-tegra20.c
+++ b/arch/arm/mach-tegra/cpuidle-tegra20.c
@@ -211,6 +211,18 @@
}
#endif
+/*
+ * Tegra20 HW appears to have a bug such that PCIe device interrupts, whether
+ * they are legacy IRQs or MSI, are lost when LP2 is enabled. To work around
+ * this, simply disable LP2 if the PCI driver and DT node are both enabled.
+ */
+void tegra20_cpuidle_pcie_irqs_in_use(void)
+{
+ pr_info_once(
+ "Disabling cpuidle LP2 state, since PCIe IRQs are in use\n");
+ tegra_idle_driver.states[1].disabled = true;
+}
+
int __init tegra20_cpuidle_init(void)
{
return cpuidle_register(&tegra_idle_driver, cpu_possible_mask);
diff --git a/arch/arm/mach-tegra/cpuidle.c b/arch/arm/mach-tegra/cpuidle.c
index e85973c..0961dfc 100644
--- a/arch/arm/mach-tegra/cpuidle.c
+++ b/arch/arm/mach-tegra/cpuidle.c
@@ -44,3 +44,13 @@
break;
}
}
+
+void tegra_cpuidle_pcie_irqs_in_use(void)
+{
+ switch (tegra_chip_id) {
+ case TEGRA20:
+ if (IS_ENABLED(CONFIG_ARCH_TEGRA_2x_SOC))
+ tegra20_cpuidle_pcie_irqs_in_use();
+ break;
+ }
+}
diff --git a/arch/arm/mach-tegra/cpuidle.h b/arch/arm/mach-tegra/cpuidle.h
index 9ec2c1a..c017dab 100644
--- a/arch/arm/mach-tegra/cpuidle.h
+++ b/arch/arm/mach-tegra/cpuidle.h
@@ -19,6 +19,7 @@
#ifdef CONFIG_CPU_IDLE
int tegra20_cpuidle_init(void);
+void tegra20_cpuidle_pcie_irqs_in_use(void);
int tegra30_cpuidle_init(void);
int tegra114_cpuidle_init(void);
void tegra_cpuidle_init(void);
diff --git a/arch/arm/mach-tegra/flowctrl.c b/arch/arm/mach-tegra/flowctrl.c
index b477ef3..5348543 100644
--- a/arch/arm/mach-tegra/flowctrl.c
+++ b/arch/arm/mach-tegra/flowctrl.c
@@ -86,6 +86,7 @@
reg |= TEGRA20_FLOW_CTRL_CSR_WFE_CPU0 << cpuid;
break;
case TEGRA30:
+ case TEGRA114:
/* clear wfe bitmap */
reg &= ~TEGRA30_FLOW_CTRL_CSR_WFE_BITMAP;
/* clear wfi bitmap */
@@ -123,6 +124,7 @@
reg &= ~TEGRA20_FLOW_CTRL_CSR_WFI_BITMAP;
break;
case TEGRA30:
+ case TEGRA114:
/* clear wfe bitmap */
reg &= ~TEGRA30_FLOW_CTRL_CSR_WFE_BITMAP;
/* clear wfi bitmap */
diff --git a/arch/arm/mach-tegra/flowctrl.h b/arch/arm/mach-tegra/flowctrl.h
index 7a29bae..c89aac6 100644
--- a/arch/arm/mach-tegra/flowctrl.h
+++ b/arch/arm/mach-tegra/flowctrl.h
@@ -28,9 +28,18 @@
#define FLOW_CTRL_SCLK_RESUME (1 << 27)
#define FLOW_CTRL_HALT_CPU_IRQ (1 << 10)
#define FLOW_CTRL_HALT_CPU_FIQ (1 << 8)
+#define FLOW_CTRL_HALT_LIC_IRQ (1 << 11)
+#define FLOW_CTRL_HALT_LIC_FIQ (1 << 10)
+#define FLOW_CTRL_HALT_GIC_IRQ (1 << 9)
+#define FLOW_CTRL_HALT_GIC_FIQ (1 << 8)
#define FLOW_CTRL_CPU0_CSR 0x8
#define FLOW_CTRL_CSR_INTR_FLAG (1 << 15)
#define FLOW_CTRL_CSR_EVENT_FLAG (1 << 14)
+#define FLOW_CTRL_CSR_ENABLE_EXT_CRAIL (1 << 13)
+#define FLOW_CTRL_CSR_ENABLE_EXT_NCPU (1 << 12)
+#define FLOW_CTRL_CSR_ENABLE_EXT_MASK ( \
+ FLOW_CTRL_CSR_ENABLE_EXT_NCPU | \
+ FLOW_CTRL_CSR_ENABLE_EXT_CRAIL)
#define FLOW_CTRL_CSR_ENABLE (1 << 0)
#define FLOW_CTRL_HALT_CPU1_EVENTS 0x14
#define FLOW_CTRL_CPU1_CSR 0x18
diff --git a/arch/arm/mach-tegra/headsmp.S b/arch/arm/mach-tegra/headsmp.S
index 045c16f..2072e73 100644
--- a/arch/arm/mach-tegra/headsmp.S
+++ b/arch/arm/mach-tegra/headsmp.S
@@ -6,6 +6,7 @@
.section ".text.head", "ax"
ENTRY(tegra_secondary_startup)
- bl v7_invalidate_l1
+ check_cpu_part_num 0xc09, r8, r9
+ bleq v7_invalidate_l1
b secondary_startup
ENDPROC(tegra_secondary_startup)
diff --git a/arch/arm/mach-tegra/hotplug.c b/arch/arm/mach-tegra/hotplug.c
index a52c10e..04de2e8 100644
--- a/arch/arm/mach-tegra/hotplug.c
+++ b/arch/arm/mach-tegra/hotplug.c
@@ -37,7 +37,7 @@
void __ref tegra_cpu_die(unsigned int cpu)
{
/* Clean L1 data cache */
- tegra_disable_clean_inv_dcache();
+ tegra_disable_clean_inv_dcache(TEGRA_FLUSH_CACHE_LOUIS);
/* Shut down the current CPU. */
tegra_hotplug_shutdown();
@@ -46,17 +46,6 @@
BUG();
}
-int tegra_cpu_disable(unsigned int cpu)
-{
- switch (tegra_chip_id) {
- case TEGRA20:
- case TEGRA30:
- return cpu == 0 ? -EPERM : 0;
- default:
- return 0;
- }
-}
-
void __init tegra_hotplug_init(void)
{
if (!IS_ENABLED(CONFIG_HOTPLUG_CPU))
diff --git a/arch/arm/mach-tegra/iomap.h b/arch/arm/mach-tegra/iomap.h
index 399fbca..3f5fa07 100644
--- a/arch/arm/mach-tegra/iomap.h
+++ b/arch/arm/mach-tegra/iomap.h
@@ -24,6 +24,8 @@
#define TEGRA_IRAM_BASE 0x40000000
#define TEGRA_IRAM_SIZE SZ_256K
+#define TEGRA_IRAM_CODE_AREA (TEGRA_IRAM_BASE + SZ_4K)
+
#define TEGRA_HOST1X_BASE 0x50000000
#define TEGRA_HOST1X_SIZE 0x24000
@@ -237,6 +239,12 @@
#define TEGRA_KFUSE_BASE 0x7000FC00
#define TEGRA_KFUSE_SIZE SZ_1K
+#define TEGRA_EMC0_BASE 0x7001A000
+#define TEGRA_EMC0_SIZE SZ_2K
+
+#define TEGRA_EMC1_BASE 0x7001A800
+#define TEGRA_EMC1_SIZE SZ_2K
+
#define TEGRA_CSITE_BASE 0x70040000
#define TEGRA_CSITE_SIZE SZ_256K
@@ -278,9 +286,6 @@
#define IO_APB_VIRT IOMEM(0xFE300000)
#define IO_APB_SIZE SZ_1M
-#define TEGRA_PCIE_BASE 0x80000000
-#define TEGRA_PCIE_IO_BASE (TEGRA_PCIE_BASE + SZ_4M)
-
#define IO_TO_VIRT_BETWEEN(p, st, sz) ((p) >= (st) && (p) < ((st) + (sz)))
#define IO_TO_VIRT_XLATE(p, pst, vst) (((p) - (pst) + (vst)))
diff --git a/arch/arm/mach-tegra/irq.c b/arch/arm/mach-tegra/irq.c
index 0de4eed..1a74d56 100644
--- a/arch/arm/mach-tegra/irq.c
+++ b/arch/arm/mach-tegra/irq.c
@@ -18,10 +18,12 @@
*/
#include <linux/kernel.h>
+#include <linux/cpu_pm.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
#include <linux/io.h>
#include <linux/of.h>
+#include <linux/of_address.h>
#include <linux/irqchip/arm-gic.h>
#include <linux/syscore_ops.h>
@@ -65,6 +67,7 @@
static u32 cpu_iep[TEGRA_MAX_NUM_ICTLRS];
static u32 ictlr_wake_mask[TEGRA_MAX_NUM_ICTLRS];
+static void __iomem *tegra_gic_cpu_base;
#endif
bool tegra_pending_sgi(void)
@@ -213,8 +216,43 @@
return 0;
}
+
+static int tegra_gic_notifier(struct notifier_block *self,
+ unsigned long cmd, void *v)
+{
+ switch (cmd) {
+ case CPU_PM_ENTER:
+ writel_relaxed(0x1E0, tegra_gic_cpu_base + GIC_CPU_CTRL);
+ break;
+ }
+
+ return NOTIFY_OK;
+}
+
+static struct notifier_block tegra_gic_notifier_block = {
+ .notifier_call = tegra_gic_notifier,
+};
+
+static const struct of_device_id tegra114_dt_gic_match[] __initconst = {
+ { .compatible = "arm,cortex-a15-gic" },
+ { }
+};
+
+static void tegra114_gic_cpu_pm_registration(void)
+{
+ struct device_node *dn;
+
+ dn = of_find_matching_node(NULL, tegra114_dt_gic_match);
+ if (!dn)
+ return;
+
+ tegra_gic_cpu_base = of_iomap(dn, 1);
+
+ cpu_pm_register_notifier(&tegra_gic_notifier_block);
+}
#else
#define tegra_set_wake NULL
+static void tegra114_gic_cpu_pm_registration(void) { }
#endif
void __init tegra_init_irq(void)
@@ -252,4 +290,6 @@
if (!of_have_populated_dt())
gic_init(0, 29, distbase,
IO_ADDRESS(TEGRA_ARM_PERIF_BASE + 0x100));
+
+ tegra114_gic_cpu_pm_registration();
}
diff --git a/arch/arm/mach-tegra/pcie.c b/arch/arm/mach-tegra/pcie.c
deleted file mode 100644
index 46144a1..0000000
--- a/arch/arm/mach-tegra/pcie.c
+++ /dev/null
@@ -1,886 +0,0 @@
-/*
- * arch/arm/mach-tegra/pci.c
- *
- * PCIe host controller driver for TEGRA(2) SOCs
- *
- * Copyright (c) 2010, CompuLab, Ltd.
- * Author: Mike Rapoport <mike@compulab.co.il>
- *
- * Based on NVIDIA PCIe driver
- * Copyright (c) 2008-2009, NVIDIA Corporation.
- *
- * Bits taken from arch/arm/mach-dove/pcie.c
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
- */
-
-#include <linux/kernel.h>
-#include <linux/pci.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/clk.h>
-#include <linux/delay.h>
-#include <linux/export.h>
-#include <linux/clk/tegra.h>
-#include <linux/tegra-powergate.h>
-
-#include <asm/sizes.h>
-#include <asm/mach/pci.h>
-
-#include "board.h"
-#include "iomap.h"
-
-/* Hack - need to parse this from DT */
-#define INT_PCIE_INTR 130
-
-/* register definitions */
-#define AFI_OFFSET 0x3800
-#define PADS_OFFSET 0x3000
-#define RP0_OFFSET 0x0000
-#define RP1_OFFSET 0x1000
-
-#define AFI_AXI_BAR0_SZ 0x00
-#define AFI_AXI_BAR1_SZ 0x04
-#define AFI_AXI_BAR2_SZ 0x08
-#define AFI_AXI_BAR3_SZ 0x0c
-#define AFI_AXI_BAR4_SZ 0x10
-#define AFI_AXI_BAR5_SZ 0x14
-
-#define AFI_AXI_BAR0_START 0x18
-#define AFI_AXI_BAR1_START 0x1c
-#define AFI_AXI_BAR2_START 0x20
-#define AFI_AXI_BAR3_START 0x24
-#define AFI_AXI_BAR4_START 0x28
-#define AFI_AXI_BAR5_START 0x2c
-
-#define AFI_FPCI_BAR0 0x30
-#define AFI_FPCI_BAR1 0x34
-#define AFI_FPCI_BAR2 0x38
-#define AFI_FPCI_BAR3 0x3c
-#define AFI_FPCI_BAR4 0x40
-#define AFI_FPCI_BAR5 0x44
-
-#define AFI_CACHE_BAR0_SZ 0x48
-#define AFI_CACHE_BAR0_ST 0x4c
-#define AFI_CACHE_BAR1_SZ 0x50
-#define AFI_CACHE_BAR1_ST 0x54
-
-#define AFI_MSI_BAR_SZ 0x60
-#define AFI_MSI_FPCI_BAR_ST 0x64
-#define AFI_MSI_AXI_BAR_ST 0x68
-
-#define AFI_CONFIGURATION 0xac
-#define AFI_CONFIGURATION_EN_FPCI (1 << 0)
-
-#define AFI_FPCI_ERROR_MASKS 0xb0
-
-#define AFI_INTR_MASK 0xb4
-#define AFI_INTR_MASK_INT_MASK (1 << 0)
-#define AFI_INTR_MASK_MSI_MASK (1 << 8)
-
-#define AFI_INTR_CODE 0xb8
-#define AFI_INTR_CODE_MASK 0xf
-#define AFI_INTR_MASTER_ABORT 4
-#define AFI_INTR_LEGACY 6
-
-#define AFI_INTR_SIGNATURE 0xbc
-#define AFI_SM_INTR_ENABLE 0xc4
-
-#define AFI_AFI_INTR_ENABLE 0xc8
-#define AFI_INTR_EN_INI_SLVERR (1 << 0)
-#define AFI_INTR_EN_INI_DECERR (1 << 1)
-#define AFI_INTR_EN_TGT_SLVERR (1 << 2)
-#define AFI_INTR_EN_TGT_DECERR (1 << 3)
-#define AFI_INTR_EN_TGT_WRERR (1 << 4)
-#define AFI_INTR_EN_DFPCI_DECERR (1 << 5)
-#define AFI_INTR_EN_AXI_DECERR (1 << 6)
-#define AFI_INTR_EN_FPCI_TIMEOUT (1 << 7)
-
-#define AFI_PCIE_CONFIG 0x0f8
-#define AFI_PCIE_CONFIG_PCIEC0_DISABLE_DEVICE (1 << 1)
-#define AFI_PCIE_CONFIG_PCIEC1_DISABLE_DEVICE (1 << 2)
-#define AFI_PCIE_CONFIG_SM2TMS0_XBAR_CONFIG_MASK (0xf << 20)
-#define AFI_PCIE_CONFIG_SM2TMS0_XBAR_CONFIG_SINGLE (0x0 << 20)
-#define AFI_PCIE_CONFIG_SM2TMS0_XBAR_CONFIG_DUAL (0x1 << 20)
-
-#define AFI_FUSE 0x104
-#define AFI_FUSE_PCIE_T0_GEN2_DIS (1 << 2)
-
-#define AFI_PEX0_CTRL 0x110
-#define AFI_PEX1_CTRL 0x118
-#define AFI_PEX_CTRL_RST (1 << 0)
-#define AFI_PEX_CTRL_REFCLK_EN (1 << 3)
-
-#define RP_VEND_XP 0x00000F00
-#define RP_VEND_XP_DL_UP (1 << 30)
-
-#define RP_LINK_CONTROL_STATUS 0x00000090
-#define RP_LINK_CONTROL_STATUS_LINKSTAT_MASK 0x3fff0000
-
-#define PADS_CTL_SEL 0x0000009C
-
-#define PADS_CTL 0x000000A0
-#define PADS_CTL_IDDQ_1L (1 << 0)
-#define PADS_CTL_TX_DATA_EN_1L (1 << 6)
-#define PADS_CTL_RX_DATA_EN_1L (1 << 10)
-
-#define PADS_PLL_CTL 0x000000B8
-#define PADS_PLL_CTL_RST_B4SM (1 << 1)
-#define PADS_PLL_CTL_LOCKDET (1 << 8)
-#define PADS_PLL_CTL_REFCLK_MASK (0x3 << 16)
-#define PADS_PLL_CTL_REFCLK_INTERNAL_CML (0 << 16)
-#define PADS_PLL_CTL_REFCLK_INTERNAL_CMOS (1 << 16)
-#define PADS_PLL_CTL_REFCLK_EXTERNAL (2 << 16)
-#define PADS_PLL_CTL_TXCLKREF_MASK (0x1 << 20)
-#define PADS_PLL_CTL_TXCLKREF_DIV10 (0 << 20)
-#define PADS_PLL_CTL_TXCLKREF_DIV5 (1 << 20)
-
-/* PMC access is required for PCIE xclk (un)clamping */
-#define PMC_SCRATCH42 0x144
-#define PMC_SCRATCH42_PCX_CLAMP (1 << 0)
-
-static void __iomem *reg_pmc_base = IO_ADDRESS(TEGRA_PMC_BASE);
-
-#define pmc_writel(value, reg) \
- __raw_writel(value, reg_pmc_base + (reg))
-#define pmc_readl(reg) \
- __raw_readl(reg_pmc_base + (reg))
-
-/*
- * Tegra2 defines 1GB in the AXI address map for PCIe.
- *
- * That address space is split into different regions, with sizes and
- * offsets as follows:
- *
- * 0x80000000 - 0x80003fff - PCI controller registers
- * 0x80004000 - 0x80103fff - PCI configuration space
- * 0x80104000 - 0x80203fff - PCI extended configuration space
- * 0x80203fff - 0x803fffff - unused
- * 0x80400000 - 0x8040ffff - downstream IO
- * 0x80410000 - 0x8fffffff - unused
- * 0x90000000 - 0x9fffffff - non-prefetchable memory
- * 0xa0000000 - 0xbfffffff - prefetchable memory
- */
-#define PCIE_REGS_SZ SZ_16K
-#define PCIE_CFG_OFF PCIE_REGS_SZ
-#define PCIE_CFG_SZ SZ_1M
-#define PCIE_EXT_CFG_OFF (PCIE_CFG_SZ + PCIE_CFG_OFF)
-#define PCIE_EXT_CFG_SZ SZ_1M
-#define PCIE_IOMAP_SZ (PCIE_REGS_SZ + PCIE_CFG_SZ + PCIE_EXT_CFG_SZ)
-
-#define MEM_BASE_0 (TEGRA_PCIE_BASE + SZ_256M)
-#define MEM_SIZE_0 SZ_128M
-#define MEM_BASE_1 (MEM_BASE_0 + MEM_SIZE_0)
-#define MEM_SIZE_1 SZ_128M
-#define PREFETCH_MEM_BASE_0 (MEM_BASE_1 + MEM_SIZE_1)
-#define PREFETCH_MEM_SIZE_0 SZ_128M
-#define PREFETCH_MEM_BASE_1 (PREFETCH_MEM_BASE_0 + PREFETCH_MEM_SIZE_0)
-#define PREFETCH_MEM_SIZE_1 SZ_128M
-
-#define PCIE_CONF_BUS(b) ((b) << 16)
-#define PCIE_CONF_DEV(d) ((d) << 11)
-#define PCIE_CONF_FUNC(f) ((f) << 8)
-#define PCIE_CONF_REG(r) \
- (((r) & ~0x3) | (((r) < 256) ? PCIE_CFG_OFF : PCIE_EXT_CFG_OFF))
-
-struct tegra_pcie_port {
- int index;
- u8 root_bus_nr;
- void __iomem *base;
-
- bool link_up;
-
- char mem_space_name[16];
- char prefetch_space_name[20];
- struct resource res[2];
-};
-
-struct tegra_pcie_info {
- struct tegra_pcie_port port[2];
- int num_ports;
-
- void __iomem *regs;
- struct resource res_mmio;
-
- struct clk *pex_clk;
- struct clk *afi_clk;
- struct clk *pcie_xclk;
- struct clk *pll_e;
-};
-
-static struct tegra_pcie_info tegra_pcie;
-
-static inline void afi_writel(u32 value, unsigned long offset)
-{
- writel(value, offset + AFI_OFFSET + tegra_pcie.regs);
-}
-
-static inline u32 afi_readl(unsigned long offset)
-{
- return readl(offset + AFI_OFFSET + tegra_pcie.regs);
-}
-
-static inline void pads_writel(u32 value, unsigned long offset)
-{
- writel(value, offset + PADS_OFFSET + tegra_pcie.regs);
-}
-
-static inline u32 pads_readl(unsigned long offset)
-{
- return readl(offset + PADS_OFFSET + tegra_pcie.regs);
-}
-
-static struct tegra_pcie_port *bus_to_port(int bus)
-{
- int i;
-
- for (i = tegra_pcie.num_ports - 1; i >= 0; i--) {
- int rbus = tegra_pcie.port[i].root_bus_nr;
- if (rbus != -1 && rbus == bus)
- break;
- }
-
- return i >= 0 ? tegra_pcie.port + i : NULL;
-}
-
-static int tegra_pcie_read_conf(struct pci_bus *bus, unsigned int devfn,
- int where, int size, u32 *val)
-{
- struct tegra_pcie_port *pp = bus_to_port(bus->number);
- void __iomem *addr;
-
- if (pp) {
- if (devfn != 0) {
- *val = 0xffffffff;
- return PCIBIOS_DEVICE_NOT_FOUND;
- }
-
- addr = pp->base + (where & ~0x3);
- } else {
- addr = tegra_pcie.regs + (PCIE_CONF_BUS(bus->number) +
- PCIE_CONF_DEV(PCI_SLOT(devfn)) +
- PCIE_CONF_FUNC(PCI_FUNC(devfn)) +
- PCIE_CONF_REG(where));
- }
-
- *val = readl(addr);
-
- if (size == 1)
- *val = (*val >> (8 * (where & 3))) & 0xff;
- else if (size == 2)
- *val = (*val >> (8 * (where & 3))) & 0xffff;
-
- return PCIBIOS_SUCCESSFUL;
-}
-
-static int tegra_pcie_write_conf(struct pci_bus *bus, unsigned int devfn,
- int where, int size, u32 val)
-{
- struct tegra_pcie_port *pp = bus_to_port(bus->number);
- void __iomem *addr;
-
- u32 mask;
- u32 tmp;
-
- if (pp) {
- if (devfn != 0)
- return PCIBIOS_DEVICE_NOT_FOUND;
-
- addr = pp->base + (where & ~0x3);
- } else {
- addr = tegra_pcie.regs + (PCIE_CONF_BUS(bus->number) +
- PCIE_CONF_DEV(PCI_SLOT(devfn)) +
- PCIE_CONF_FUNC(PCI_FUNC(devfn)) +
- PCIE_CONF_REG(where));
- }
-
- if (size == 4) {
- writel(val, addr);
- return PCIBIOS_SUCCESSFUL;
- }
-
- if (size == 2)
- mask = ~(0xffff << ((where & 0x3) * 8));
- else if (size == 1)
- mask = ~(0xff << ((where & 0x3) * 8));
- else
- return PCIBIOS_BAD_REGISTER_NUMBER;
-
- tmp = readl(addr) & mask;
- tmp |= val << ((where & 0x3) * 8);
- writel(tmp, addr);
-
- return PCIBIOS_SUCCESSFUL;
-}
-
-static struct pci_ops tegra_pcie_ops = {
- .read = tegra_pcie_read_conf,
- .write = tegra_pcie_write_conf,
-};
-
-static void tegra_pcie_fixup_bridge(struct pci_dev *dev)
-{
- u16 reg;
-
- if ((dev->class >> 16) == PCI_BASE_CLASS_BRIDGE) {
- pci_read_config_word(dev, PCI_COMMAND, ®);
- reg |= (PCI_COMMAND_IO | PCI_COMMAND_MEMORY |
- PCI_COMMAND_MASTER | PCI_COMMAND_SERR);
- pci_write_config_word(dev, PCI_COMMAND, reg);
- }
-}
-DECLARE_PCI_FIXUP_FINAL(PCI_ANY_ID, PCI_ANY_ID, tegra_pcie_fixup_bridge);
-
-/* Tegra PCIE root complex wrongly reports device class */
-static void tegra_pcie_fixup_class(struct pci_dev *dev)
-{
- dev->class = PCI_CLASS_BRIDGE_PCI << 8;
-}
-DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_NVIDIA, 0x0bf0, tegra_pcie_fixup_class);
-DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_NVIDIA, 0x0bf1, tegra_pcie_fixup_class);
-
-/* Tegra PCIE requires relaxed ordering */
-static void tegra_pcie_relax_enable(struct pci_dev *dev)
-{
- pcie_capability_set_word(dev, PCI_EXP_DEVCTL, PCI_EXP_DEVCTL_RELAX_EN);
-}
-DECLARE_PCI_FIXUP_FINAL(PCI_ANY_ID, PCI_ANY_ID, tegra_pcie_relax_enable);
-
-static int tegra_pcie_setup(int nr, struct pci_sys_data *sys)
-{
- struct tegra_pcie_port *pp;
-
- if (nr >= tegra_pcie.num_ports)
- return 0;
-
- pp = tegra_pcie.port + nr;
- pp->root_bus_nr = sys->busnr;
-
- pci_ioremap_io(nr * SZ_64K, TEGRA_PCIE_IO_BASE);
-
- /*
- * IORESOURCE_MEM
- */
- snprintf(pp->mem_space_name, sizeof(pp->mem_space_name),
- "PCIe %d MEM", pp->index);
- pp->mem_space_name[sizeof(pp->mem_space_name) - 1] = 0;
- pp->res[0].name = pp->mem_space_name;
- if (pp->index == 0) {
- pp->res[0].start = MEM_BASE_0;
- pp->res[0].end = pp->res[0].start + MEM_SIZE_0 - 1;
- } else {
- pp->res[0].start = MEM_BASE_1;
- pp->res[0].end = pp->res[0].start + MEM_SIZE_1 - 1;
- }
- pp->res[0].flags = IORESOURCE_MEM;
- if (request_resource(&iomem_resource, &pp->res[0]))
- panic("Request PCIe Memory resource failed\n");
- pci_add_resource_offset(&sys->resources, &pp->res[0], sys->mem_offset);
-
- /*
- * IORESOURCE_MEM | IORESOURCE_PREFETCH
- */
- snprintf(pp->prefetch_space_name, sizeof(pp->prefetch_space_name),
- "PCIe %d PREFETCH MEM", pp->index);
- pp->prefetch_space_name[sizeof(pp->prefetch_space_name) - 1] = 0;
- pp->res[1].name = pp->prefetch_space_name;
- if (pp->index == 0) {
- pp->res[1].start = PREFETCH_MEM_BASE_0;
- pp->res[1].end = pp->res[1].start + PREFETCH_MEM_SIZE_0 - 1;
- } else {
- pp->res[1].start = PREFETCH_MEM_BASE_1;
- pp->res[1].end = pp->res[1].start + PREFETCH_MEM_SIZE_1 - 1;
- }
- pp->res[1].flags = IORESOURCE_MEM | IORESOURCE_PREFETCH;
- if (request_resource(&iomem_resource, &pp->res[1]))
- panic("Request PCIe Prefetch Memory resource failed\n");
- pci_add_resource_offset(&sys->resources, &pp->res[1], sys->mem_offset);
-
- return 1;
-}
-
-static int tegra_pcie_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-{
- return INT_PCIE_INTR;
-}
-
-static struct pci_bus __init *tegra_pcie_scan_bus(int nr,
- struct pci_sys_data *sys)
-{
- struct tegra_pcie_port *pp;
-
- if (nr >= tegra_pcie.num_ports)
- return NULL;
-
- pp = tegra_pcie.port + nr;
- pp->root_bus_nr = sys->busnr;
-
- return pci_scan_root_bus(NULL, sys->busnr, &tegra_pcie_ops, sys,
- &sys->resources);
-}
-
-static struct hw_pci tegra_pcie_hw __initdata = {
- .nr_controllers = 2,
- .setup = tegra_pcie_setup,
- .scan = tegra_pcie_scan_bus,
- .map_irq = tegra_pcie_map_irq,
-};
-
-
-static irqreturn_t tegra_pcie_isr(int irq, void *arg)
-{
- const char *err_msg[] = {
- "Unknown",
- "AXI slave error",
- "AXI decode error",
- "Target abort",
- "Master abort",
- "Invalid write",
- "Response decoding error",
- "AXI response decoding error",
- "Transcation timeout",
- };
-
- u32 code, signature;
-
- code = afi_readl(AFI_INTR_CODE) & AFI_INTR_CODE_MASK;
- signature = afi_readl(AFI_INTR_SIGNATURE);
- afi_writel(0, AFI_INTR_CODE);
-
- if (code == AFI_INTR_LEGACY)
- return IRQ_NONE;
-
- if (code >= ARRAY_SIZE(err_msg))
- code = 0;
-
- /*
- * do not pollute kernel log with master abort reports since they
- * happen a lot during enumeration
- */
- if (code == AFI_INTR_MASTER_ABORT)
- pr_debug("PCIE: %s, signature: %08x\n", err_msg[code], signature);
- else
- pr_err("PCIE: %s, signature: %08x\n", err_msg[code], signature);
-
- return IRQ_HANDLED;
-}
-
-static void tegra_pcie_setup_translations(void)
-{
- u32 fpci_bar;
- u32 size;
- u32 axi_address;
-
- /* Bar 0: config Bar */
- fpci_bar = ((u32)0xfdff << 16);
- size = PCIE_CFG_SZ;
- axi_address = TEGRA_PCIE_BASE + PCIE_CFG_OFF;
- afi_writel(axi_address, AFI_AXI_BAR0_START);
- afi_writel(size >> 12, AFI_AXI_BAR0_SZ);
- afi_writel(fpci_bar, AFI_FPCI_BAR0);
-
- /* Bar 1: extended config Bar */
- fpci_bar = ((u32)0xfe1 << 20);
- size = PCIE_EXT_CFG_SZ;
- axi_address = TEGRA_PCIE_BASE + PCIE_EXT_CFG_OFF;
- afi_writel(axi_address, AFI_AXI_BAR1_START);
- afi_writel(size >> 12, AFI_AXI_BAR1_SZ);
- afi_writel(fpci_bar, AFI_FPCI_BAR1);
-
- /* Bar 2: downstream IO bar */
- fpci_bar = ((__u32)0xfdfc << 16);
- size = SZ_128K;
- axi_address = TEGRA_PCIE_IO_BASE;
- afi_writel(axi_address, AFI_AXI_BAR2_START);
- afi_writel(size >> 12, AFI_AXI_BAR2_SZ);
- afi_writel(fpci_bar, AFI_FPCI_BAR2);
-
- /* Bar 3: prefetchable memory BAR */
- fpci_bar = (((PREFETCH_MEM_BASE_0 >> 12) & 0x0fffffff) << 4) | 0x1;
- size = PREFETCH_MEM_SIZE_0 + PREFETCH_MEM_SIZE_1;
- axi_address = PREFETCH_MEM_BASE_0;
- afi_writel(axi_address, AFI_AXI_BAR3_START);
- afi_writel(size >> 12, AFI_AXI_BAR3_SZ);
- afi_writel(fpci_bar, AFI_FPCI_BAR3);
-
- /* Bar 4: non prefetchable memory BAR */
- fpci_bar = (((MEM_BASE_0 >> 12) & 0x0FFFFFFF) << 4) | 0x1;
- size = MEM_SIZE_0 + MEM_SIZE_1;
- axi_address = MEM_BASE_0;
- afi_writel(axi_address, AFI_AXI_BAR4_START);
- afi_writel(size >> 12, AFI_AXI_BAR4_SZ);
- afi_writel(fpci_bar, AFI_FPCI_BAR4);
-
- /* Bar 5: NULL out the remaining BAR as it is not used */
- fpci_bar = 0;
- size = 0;
- axi_address = 0;
- afi_writel(axi_address, AFI_AXI_BAR5_START);
- afi_writel(size >> 12, AFI_AXI_BAR5_SZ);
- afi_writel(fpci_bar, AFI_FPCI_BAR5);
-
- /* map all upstream transactions as uncached */
- afi_writel(PHYS_OFFSET, AFI_CACHE_BAR0_ST);
- afi_writel(0, AFI_CACHE_BAR0_SZ);
- afi_writel(0, AFI_CACHE_BAR1_ST);
- afi_writel(0, AFI_CACHE_BAR1_SZ);
-
- /* No MSI */
- afi_writel(0, AFI_MSI_FPCI_BAR_ST);
- afi_writel(0, AFI_MSI_BAR_SZ);
- afi_writel(0, AFI_MSI_AXI_BAR_ST);
- afi_writel(0, AFI_MSI_BAR_SZ);
-}
-
-static int tegra_pcie_enable_controller(void)
-{
- u32 val, reg;
- int i, timeout;
-
- /* Enable slot clock and pulse the reset signals */
- for (i = 0, reg = AFI_PEX0_CTRL; i < 2; i++, reg += 0x8) {
- val = afi_readl(reg) | AFI_PEX_CTRL_REFCLK_EN;
- afi_writel(val, reg);
- val &= ~AFI_PEX_CTRL_RST;
- afi_writel(val, reg);
-
- val = afi_readl(reg) | AFI_PEX_CTRL_RST;
- afi_writel(val, reg);
- }
-
- /* Enable dual controller and both ports */
- val = afi_readl(AFI_PCIE_CONFIG);
- val &= ~(AFI_PCIE_CONFIG_PCIEC0_DISABLE_DEVICE |
- AFI_PCIE_CONFIG_PCIEC1_DISABLE_DEVICE |
- AFI_PCIE_CONFIG_SM2TMS0_XBAR_CONFIG_MASK);
- val |= AFI_PCIE_CONFIG_SM2TMS0_XBAR_CONFIG_DUAL;
- afi_writel(val, AFI_PCIE_CONFIG);
-
- val = afi_readl(AFI_FUSE) & ~AFI_FUSE_PCIE_T0_GEN2_DIS;
- afi_writel(val, AFI_FUSE);
-
- /* Initialze internal PHY, enable up to 16 PCIE lanes */
- pads_writel(0x0, PADS_CTL_SEL);
-
- /* override IDDQ to 1 on all 4 lanes */
- val = pads_readl(PADS_CTL) | PADS_CTL_IDDQ_1L;
- pads_writel(val, PADS_CTL);
-
- /*
- * set up PHY PLL inputs select PLLE output as refclock,
- * set TX ref sel to div10 (not div5)
- */
- val = pads_readl(PADS_PLL_CTL);
- val &= ~(PADS_PLL_CTL_REFCLK_MASK | PADS_PLL_CTL_TXCLKREF_MASK);
- val |= (PADS_PLL_CTL_REFCLK_INTERNAL_CML | PADS_PLL_CTL_TXCLKREF_DIV10);
- pads_writel(val, PADS_PLL_CTL);
-
- /* take PLL out of reset */
- val = pads_readl(PADS_PLL_CTL) | PADS_PLL_CTL_RST_B4SM;
- pads_writel(val, PADS_PLL_CTL);
-
- /*
- * Hack, set the clock voltage to the DEFAULT provided by hw folks.
- * This doesn't exist in the documentation
- */
- pads_writel(0xfa5cfa5c, 0xc8);
-
- /* Wait for the PLL to lock */
- timeout = 300;
- do {
- val = pads_readl(PADS_PLL_CTL);
- usleep_range(1000, 1000);
- if (--timeout == 0) {
- pr_err("Tegra PCIe error: timeout waiting for PLL\n");
- return -EBUSY;
- }
- } while (!(val & PADS_PLL_CTL_LOCKDET));
-
- /* turn off IDDQ override */
- val = pads_readl(PADS_CTL) & ~PADS_CTL_IDDQ_1L;
- pads_writel(val, PADS_CTL);
-
- /* enable TX/RX data */
- val = pads_readl(PADS_CTL);
- val |= (PADS_CTL_TX_DATA_EN_1L | PADS_CTL_RX_DATA_EN_1L);
- pads_writel(val, PADS_CTL);
-
- /* Take the PCIe interface module out of reset */
- tegra_periph_reset_deassert(tegra_pcie.pcie_xclk);
-
- /* Finally enable PCIe */
- val = afi_readl(AFI_CONFIGURATION) | AFI_CONFIGURATION_EN_FPCI;
- afi_writel(val, AFI_CONFIGURATION);
-
- val = (AFI_INTR_EN_INI_SLVERR | AFI_INTR_EN_INI_DECERR |
- AFI_INTR_EN_TGT_SLVERR | AFI_INTR_EN_TGT_DECERR |
- AFI_INTR_EN_TGT_WRERR | AFI_INTR_EN_DFPCI_DECERR);
- afi_writel(val, AFI_AFI_INTR_ENABLE);
- afi_writel(0xffffffff, AFI_SM_INTR_ENABLE);
-
- /* FIXME: No MSI for now, only INT */
- afi_writel(AFI_INTR_MASK_INT_MASK, AFI_INTR_MASK);
-
- /* Disable all execptions */
- afi_writel(0, AFI_FPCI_ERROR_MASKS);
-
- return 0;
-}
-
-static void tegra_pcie_xclk_clamp(bool clamp)
-{
- u32 reg;
-
- reg = pmc_readl(PMC_SCRATCH42) & ~PMC_SCRATCH42_PCX_CLAMP;
-
- if (clamp)
- reg |= PMC_SCRATCH42_PCX_CLAMP;
-
- pmc_writel(reg, PMC_SCRATCH42);
-}
-
-static void tegra_pcie_power_off(void)
-{
- tegra_periph_reset_assert(tegra_pcie.pcie_xclk);
- tegra_periph_reset_assert(tegra_pcie.afi_clk);
- tegra_periph_reset_assert(tegra_pcie.pex_clk);
-
- tegra_powergate_power_off(TEGRA_POWERGATE_PCIE);
- tegra_pcie_xclk_clamp(true);
-}
-
-static int tegra_pcie_power_regate(void)
-{
- int err;
-
- tegra_pcie_power_off();
-
- tegra_pcie_xclk_clamp(true);
-
- tegra_periph_reset_assert(tegra_pcie.pcie_xclk);
- tegra_periph_reset_assert(tegra_pcie.afi_clk);
-
- err = tegra_powergate_sequence_power_up(TEGRA_POWERGATE_PCIE,
- tegra_pcie.pex_clk);
- if (err) {
- pr_err("PCIE: powerup sequence failed: %d\n", err);
- return err;
- }
-
- tegra_periph_reset_deassert(tegra_pcie.afi_clk);
-
- tegra_pcie_xclk_clamp(false);
-
- clk_prepare_enable(tegra_pcie.afi_clk);
- clk_prepare_enable(tegra_pcie.pex_clk);
- return clk_prepare_enable(tegra_pcie.pll_e);
-}
-
-static int tegra_pcie_clocks_get(void)
-{
- int err;
-
- tegra_pcie.pex_clk = clk_get(NULL, "pex");
- if (IS_ERR(tegra_pcie.pex_clk))
- return PTR_ERR(tegra_pcie.pex_clk);
-
- tegra_pcie.afi_clk = clk_get(NULL, "afi");
- if (IS_ERR(tegra_pcie.afi_clk)) {
- err = PTR_ERR(tegra_pcie.afi_clk);
- goto err_afi_clk;
- }
-
- tegra_pcie.pcie_xclk = clk_get(NULL, "pcie_xclk");
- if (IS_ERR(tegra_pcie.pcie_xclk)) {
- err = PTR_ERR(tegra_pcie.pcie_xclk);
- goto err_pcie_xclk;
- }
-
- tegra_pcie.pll_e = clk_get_sys(NULL, "pll_e");
- if (IS_ERR(tegra_pcie.pll_e)) {
- err = PTR_ERR(tegra_pcie.pll_e);
- goto err_pll_e;
- }
-
- return 0;
-
-err_pll_e:
- clk_put(tegra_pcie.pcie_xclk);
-err_pcie_xclk:
- clk_put(tegra_pcie.afi_clk);
-err_afi_clk:
- clk_put(tegra_pcie.pex_clk);
-
- return err;
-}
-
-static void tegra_pcie_clocks_put(void)
-{
- clk_put(tegra_pcie.pll_e);
- clk_put(tegra_pcie.pcie_xclk);
- clk_put(tegra_pcie.afi_clk);
- clk_put(tegra_pcie.pex_clk);
-}
-
-static int __init tegra_pcie_get_resources(void)
-{
- int err;
-
- err = tegra_pcie_clocks_get();
- if (err) {
- pr_err("PCIE: failed to get clocks: %d\n", err);
- return err;
- }
-
- err = tegra_pcie_power_regate();
- if (err) {
- pr_err("PCIE: failed to power up: %d\n", err);
- goto err_pwr_on;
- }
-
- tegra_pcie.regs = ioremap_nocache(TEGRA_PCIE_BASE, PCIE_IOMAP_SZ);
- if (tegra_pcie.regs == NULL) {
- pr_err("PCIE: Failed to map PCI/AFI registers\n");
- err = -ENOMEM;
- goto err_map_reg;
- }
-
- err = request_irq(INT_PCIE_INTR, tegra_pcie_isr,
- IRQF_SHARED, "PCIE", &tegra_pcie);
- if (err) {
- pr_err("PCIE: Failed to register IRQ: %d\n", err);
- goto err_req_io;
- }
- set_irq_flags(INT_PCIE_INTR, IRQF_VALID);
-
- return 0;
-
-err_req_io:
- iounmap(tegra_pcie.regs);
-err_map_reg:
- tegra_pcie_power_off();
-err_pwr_on:
- tegra_pcie_clocks_put();
-
- return err;
-}
-
-/*
- * FIXME: If there are no PCIe cards attached, then calling this function
- * can result in the increase of the bootup time as there are big timeout
- * loops.
- */
-#define TEGRA_PCIE_LINKUP_TIMEOUT 200 /* up to 1.2 seconds */
-static bool tegra_pcie_check_link(struct tegra_pcie_port *pp, int idx,
- u32 reset_reg)
-{
- u32 reg;
- int retries = 3;
- int timeout;
-
- do {
- timeout = TEGRA_PCIE_LINKUP_TIMEOUT;
- while (timeout) {
- reg = readl(pp->base + RP_VEND_XP);
-
- if (reg & RP_VEND_XP_DL_UP)
- break;
-
- mdelay(1);
- timeout--;
- }
-
- if (!timeout) {
- pr_err("PCIE: port %d: link down, retrying\n", idx);
- goto retry;
- }
-
- timeout = TEGRA_PCIE_LINKUP_TIMEOUT;
- while (timeout) {
- reg = readl(pp->base + RP_LINK_CONTROL_STATUS);
-
- if (reg & 0x20000000)
- return true;
-
- mdelay(1);
- timeout--;
- }
-
-retry:
- /* Pulse the PEX reset */
- reg = afi_readl(reset_reg) | AFI_PEX_CTRL_RST;
- afi_writel(reg, reset_reg);
- mdelay(1);
- reg = afi_readl(reset_reg) & ~AFI_PEX_CTRL_RST;
- afi_writel(reg, reset_reg);
-
- retries--;
- } while (retries);
-
- return false;
-}
-
-static void __init tegra_pcie_add_port(int index, u32 offset, u32 reset_reg)
-{
- struct tegra_pcie_port *pp;
-
- pp = tegra_pcie.port + tegra_pcie.num_ports;
-
- pp->index = -1;
- pp->base = tegra_pcie.regs + offset;
- pp->link_up = tegra_pcie_check_link(pp, index, reset_reg);
-
- if (!pp->link_up) {
- pp->base = NULL;
- printk(KERN_INFO "PCIE: port %d: link down, ignoring\n", index);
- return;
- }
-
- tegra_pcie.num_ports++;
- pp->index = index;
- pp->root_bus_nr = -1;
- memset(pp->res, 0, sizeof(pp->res));
-}
-
-int __init tegra_pcie_init(bool init_port0, bool init_port1)
-{
- int err;
-
- if (!(init_port0 || init_port1))
- return -ENODEV;
-
- pcibios_min_mem = 0;
-
- err = tegra_pcie_get_resources();
- if (err)
- return err;
-
- err = tegra_pcie_enable_controller();
- if (err)
- return err;
-
- /* setup the AFI address translations */
- tegra_pcie_setup_translations();
-
- if (init_port0)
- tegra_pcie_add_port(0, RP0_OFFSET, AFI_PEX0_CTRL);
-
- if (init_port1)
- tegra_pcie_add_port(1, RP1_OFFSET, AFI_PEX1_CTRL);
-
- pci_common_init(&tegra_pcie_hw);
-
- return 0;
-}
diff --git a/arch/arm/mach-tegra/platsmp.c b/arch/arm/mach-tegra/platsmp.c
index 97b33a2..2d02036 100644
--- a/arch/arm/mach-tegra/platsmp.c
+++ b/arch/arm/mach-tegra/platsmp.c
@@ -196,6 +196,5 @@
#ifdef CONFIG_HOTPLUG_CPU
.cpu_kill = tegra_cpu_kill,
.cpu_die = tegra_cpu_die,
- .cpu_disable = tegra_cpu_disable,
#endif
};
diff --git a/arch/arm/mach-tegra/pm-tegra20.c b/arch/arm/mach-tegra/pm-tegra20.c
new file mode 100644
index 0000000..d65e1d7
--- /dev/null
+++ b/arch/arm/mach-tegra/pm-tegra20.c
@@ -0,0 +1,34 @@
+/*
+ * Copyright (c) 2013, NVIDIA Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+#include <linux/kernel.h>
+
+#include "pm.h"
+
+#ifdef CONFIG_PM_SLEEP
+extern u32 tegra20_iram_start, tegra20_iram_end;
+extern void tegra20_sleep_core_finish(unsigned long);
+
+void tegra20_lp1_iram_hook(void)
+{
+ tegra_lp1_iram.start_addr = &tegra20_iram_start;
+ tegra_lp1_iram.end_addr = &tegra20_iram_end;
+}
+
+void tegra20_sleep_core_init(void)
+{
+ tegra_sleep_core_finish = tegra20_sleep_core_finish;
+}
+#endif
diff --git a/arch/arm/mach-tegra/pm-tegra30.c b/arch/arm/mach-tegra/pm-tegra30.c
new file mode 100644
index 0000000..8fa326d
--- /dev/null
+++ b/arch/arm/mach-tegra/pm-tegra30.c
@@ -0,0 +1,34 @@
+/*
+ * Copyright (c) 2013, NVIDIA Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+#include <linux/kernel.h>
+
+#include "pm.h"
+
+#ifdef CONFIG_PM_SLEEP
+extern u32 tegra30_iram_start, tegra30_iram_end;
+extern void tegra30_sleep_core_finish(unsigned long);
+
+void tegra30_lp1_iram_hook(void)
+{
+ tegra_lp1_iram.start_addr = &tegra30_iram_start;
+ tegra_lp1_iram.end_addr = &tegra30_iram_end;
+}
+
+void tegra30_sleep_core_init(void)
+{
+ tegra_sleep_core_finish = tegra30_sleep_core_finish;
+}
+#endif
diff --git a/arch/arm/mach-tegra/pm.c b/arch/arm/mach-tegra/pm.c
index 261fec1..ed294a0 100644
--- a/arch/arm/mach-tegra/pm.c
+++ b/arch/arm/mach-tegra/pm.c
@@ -37,12 +37,18 @@
#include "reset.h"
#include "flowctrl.h"
#include "fuse.h"
+#include "pm.h"
#include "pmc.h"
#include "sleep.h"
#ifdef CONFIG_PM_SLEEP
static DEFINE_SPINLOCK(tegra_lp2_lock);
+static u32 iram_save_size;
+static void *iram_save_addr;
+struct tegra_lp1_iram tegra_lp1_iram;
void (*tegra_tear_down_cpu)(void);
+void (*tegra_sleep_core_finish)(unsigned long v2p);
+static int (*tegra_sleep_func)(unsigned long v2p);
static void tegra_tear_down_cpu_init(void)
{
@@ -52,7 +58,9 @@
tegra_tear_down_cpu = tegra20_tear_down_cpu;
break;
case TEGRA30:
- if (IS_ENABLED(CONFIG_ARCH_TEGRA_3x_SOC))
+ case TEGRA114:
+ if (IS_ENABLED(CONFIG_ARCH_TEGRA_3x_SOC) ||
+ IS_ENABLED(CONFIG_ARCH_TEGRA_114_SOC))
tegra_tear_down_cpu = tegra30_tear_down_cpu;
break;
}
@@ -171,19 +179,109 @@
enum tegra_suspend_mode tegra_pm_validate_suspend_mode(
enum tegra_suspend_mode mode)
{
- /* Tegra114 didn't support any suspending mode yet. */
- if (tegra_chip_id == TEGRA114)
- return TEGRA_SUSPEND_NONE;
-
/*
- * The Tegra devices only support suspending to LP2 currently.
+ * The Tegra devices support suspending to LP1 or lower currently.
*/
- if (mode > TEGRA_SUSPEND_LP2)
- return TEGRA_SUSPEND_LP2;
+ if (mode > TEGRA_SUSPEND_LP1)
+ return TEGRA_SUSPEND_LP1;
return mode;
}
+static int tegra_sleep_core(unsigned long v2p)
+{
+ setup_mm_for_reboot();
+ tegra_sleep_core_finish(v2p);
+
+ /* should never here */
+ BUG();
+
+ return 0;
+}
+
+/*
+ * tegra_lp1_iram_hook
+ *
+ * Hooking the address of LP1 reset vector and SDRAM self-refresh code in
+ * SDRAM. These codes not be copied to IRAM in this fuction. We need to
+ * copy these code to IRAM before LP0/LP1 suspend and restore the content
+ * of IRAM after resume.
+ */
+static bool tegra_lp1_iram_hook(void)
+{
+ switch (tegra_chip_id) {
+ case TEGRA20:
+ if (IS_ENABLED(CONFIG_ARCH_TEGRA_2x_SOC))
+ tegra20_lp1_iram_hook();
+ break;
+ case TEGRA30:
+ case TEGRA114:
+ if (IS_ENABLED(CONFIG_ARCH_TEGRA_3x_SOC) ||
+ IS_ENABLED(CONFIG_ARCH_TEGRA_114_SOC))
+ tegra30_lp1_iram_hook();
+ break;
+ default:
+ break;
+ }
+
+ if (!tegra_lp1_iram.start_addr || !tegra_lp1_iram.end_addr)
+ return false;
+
+ iram_save_size = tegra_lp1_iram.end_addr - tegra_lp1_iram.start_addr;
+ iram_save_addr = kmalloc(iram_save_size, GFP_KERNEL);
+ if (!iram_save_addr)
+ return false;
+
+ return true;
+}
+
+static bool tegra_sleep_core_init(void)
+{
+ switch (tegra_chip_id) {
+ case TEGRA20:
+ if (IS_ENABLED(CONFIG_ARCH_TEGRA_2x_SOC))
+ tegra20_sleep_core_init();
+ break;
+ case TEGRA30:
+ case TEGRA114:
+ if (IS_ENABLED(CONFIG_ARCH_TEGRA_3x_SOC) ||
+ IS_ENABLED(CONFIG_ARCH_TEGRA_114_SOC))
+ tegra30_sleep_core_init();
+ break;
+ default:
+ break;
+ }
+
+ if (!tegra_sleep_core_finish)
+ return false;
+
+ return true;
+}
+
+static void tegra_suspend_enter_lp1(void)
+{
+ tegra_pmc_suspend();
+
+ /* copy the reset vector & SDRAM shutdown code into IRAM */
+ memcpy(iram_save_addr, IO_ADDRESS(TEGRA_IRAM_CODE_AREA),
+ iram_save_size);
+ memcpy(IO_ADDRESS(TEGRA_IRAM_CODE_AREA), tegra_lp1_iram.start_addr,
+ iram_save_size);
+
+ *((u32 *)tegra_cpu_lp1_mask) = 1;
+}
+
+static void tegra_suspend_exit_lp1(void)
+{
+ tegra_pmc_resume();
+
+ /* restore IRAM */
+ memcpy(IO_ADDRESS(TEGRA_IRAM_CODE_AREA), iram_save_addr,
+ iram_save_size);
+
+ *(u32 *)tegra_cpu_lp1_mask = 0;
+}
+
static const char *lp_state[TEGRA_MAX_SUSPEND_MODE] = {
[TEGRA_SUSPEND_NONE] = "none",
[TEGRA_SUSPEND_LP2] = "LP2",
@@ -207,6 +305,9 @@
suspend_cpu_complex();
switch (mode) {
+ case TEGRA_SUSPEND_LP1:
+ tegra_suspend_enter_lp1();
+ break;
case TEGRA_SUSPEND_LP2:
tegra_set_cpu_in_lp2();
break;
@@ -214,9 +315,12 @@
break;
}
- cpu_suspend(PHYS_OFFSET - PAGE_OFFSET, &tegra_sleep_cpu);
+ cpu_suspend(PHYS_OFFSET - PAGE_OFFSET, tegra_sleep_func);
switch (mode) {
+ case TEGRA_SUSPEND_LP1:
+ tegra_suspend_exit_lp1();
+ break;
case TEGRA_SUSPEND_LP2:
tegra_clear_cpu_in_lp2();
break;
@@ -237,12 +341,36 @@
void __init tegra_init_suspend(void)
{
- if (tegra_pmc_get_suspend_mode() == TEGRA_SUSPEND_NONE)
+ enum tegra_suspend_mode mode = tegra_pmc_get_suspend_mode();
+
+ if (mode == TEGRA_SUSPEND_NONE)
return;
tegra_tear_down_cpu_init();
tegra_pmc_suspend_init();
+ if (mode >= TEGRA_SUSPEND_LP1) {
+ if (!tegra_lp1_iram_hook() || !tegra_sleep_core_init()) {
+ pr_err("%s: unable to allocate memory for SDRAM"
+ "self-refresh -- LP0/LP1 unavailable\n",
+ __func__);
+ tegra_pmc_set_suspend_mode(TEGRA_SUSPEND_LP2);
+ mode = TEGRA_SUSPEND_LP2;
+ }
+ }
+
+ /* set up sleep function for cpu_suspend */
+ switch (mode) {
+ case TEGRA_SUSPEND_LP1:
+ tegra_sleep_func = tegra_sleep_core;
+ break;
+ case TEGRA_SUSPEND_LP2:
+ tegra_sleep_func = tegra_sleep_cpu;
+ break;
+ default:
+ break;
+ }
+
suspend_set_ops(&tegra_suspend_ops);
}
#endif
diff --git a/arch/arm/mach-tegra/pm.h b/arch/arm/mach-tegra/pm.h
index 94c4b9d..fe204e5 100644
--- a/arch/arm/mach-tegra/pm.h
+++ b/arch/arm/mach-tegra/pm.h
@@ -23,6 +23,18 @@
#include "pmc.h"
+struct tegra_lp1_iram {
+ void *start_addr;
+ void *end_addr;
+};
+extern struct tegra_lp1_iram tegra_lp1_iram;
+extern void (*tegra_sleep_core_finish)(unsigned long v2p);
+
+void tegra20_lp1_iram_hook(void);
+void tegra20_sleep_core_init(void);
+void tegra30_lp1_iram_hook(void);
+void tegra30_sleep_core_init(void);
+
extern unsigned long l2x0_saved_regs_addr;
void save_cpu_arch_register(void);
diff --git a/arch/arm/mach-tegra/pmc.c b/arch/arm/mach-tegra/pmc.c
index eb3fa4a..8acb881 100644
--- a/arch/arm/mach-tegra/pmc.c
+++ b/arch/arm/mach-tegra/pmc.c
@@ -21,11 +21,14 @@
#include <linux/of.h>
#include <linux/of_address.h>
+#include "flowctrl.h"
#include "fuse.h"
#include "pm.h"
#include "pmc.h"
#include "sleep.h"
+#define TEGRA_POWER_SYSCLK_POLARITY (1 << 10) /* sys clk polarity */
+#define TEGRA_POWER_SYSCLK_OE (1 << 11) /* system clock enable */
#define TEGRA_POWER_EFFECT_LP0 (1 << 14) /* LP0 when CPU pwr gated */
#define TEGRA_POWER_CPU_PWRREQ_POLARITY (1 << 15) /* CPU pwr req polarity */
#define TEGRA_POWER_CPU_PWRREQ_OE (1 << 16) /* CPU pwr req enable */
@@ -193,16 +196,50 @@
return pmc_pm_data.suspend_mode;
}
+void tegra_pmc_set_suspend_mode(enum tegra_suspend_mode mode)
+{
+ if (mode < TEGRA_SUSPEND_NONE || mode >= TEGRA_MAX_SUSPEND_MODE)
+ return;
+
+ pmc_pm_data.suspend_mode = mode;
+}
+
+void tegra_pmc_suspend(void)
+{
+ tegra_pmc_writel(virt_to_phys(tegra_resume), PMC_SCRATCH41);
+}
+
+void tegra_pmc_resume(void)
+{
+ tegra_pmc_writel(0x0, PMC_SCRATCH41);
+}
+
void tegra_pmc_pm_set(enum tegra_suspend_mode mode)
{
- u32 reg;
+ u32 reg, csr_reg;
unsigned long rate = 0;
reg = tegra_pmc_readl(PMC_CTRL);
reg |= TEGRA_POWER_CPU_PWRREQ_OE;
reg &= ~TEGRA_POWER_EFFECT_LP0;
+ switch (tegra_chip_id) {
+ case TEGRA20:
+ case TEGRA30:
+ break;
+ default:
+ /* Turn off CRAIL */
+ csr_reg = flowctrl_read_cpu_csr(0);
+ csr_reg &= ~FLOW_CTRL_CSR_ENABLE_EXT_MASK;
+ csr_reg |= FLOW_CTRL_CSR_ENABLE_EXT_CRAIL;
+ flowctrl_write_cpu_csr(0, csr_reg);
+ break;
+ }
+
switch (mode) {
+ case TEGRA_SUSPEND_LP1:
+ rate = 32768;
+ break;
case TEGRA_SUSPEND_LP2:
rate = clk_get_rate(tegra_pclk);
break;
@@ -224,6 +261,20 @@
reg = tegra_pmc_readl(PMC_CTRL);
reg |= TEGRA_POWER_CPU_PWRREQ_OE;
tegra_pmc_writel(reg, PMC_CTRL);
+
+ reg = tegra_pmc_readl(PMC_CTRL);
+
+ if (!pmc_pm_data.sysclkreq_high)
+ reg |= TEGRA_POWER_SYSCLK_POLARITY;
+ else
+ reg &= ~TEGRA_POWER_SYSCLK_POLARITY;
+
+ /* configure the output polarity while the request is tristated */
+ tegra_pmc_writel(reg, PMC_CTRL);
+
+ /* now enable the request */
+ reg |= TEGRA_POWER_SYSCLK_OE;
+ tegra_pmc_writel(reg, PMC_CTRL);
}
#endif
diff --git a/arch/arm/mach-tegra/pmc.h b/arch/arm/mach-tegra/pmc.h
index e1c2df2..549f8c7 100644
--- a/arch/arm/mach-tegra/pmc.h
+++ b/arch/arm/mach-tegra/pmc.h
@@ -28,6 +28,9 @@
#ifdef CONFIG_PM_SLEEP
enum tegra_suspend_mode tegra_pmc_get_suspend_mode(void);
+void tegra_pmc_set_suspend_mode(enum tegra_suspend_mode mode);
+void tegra_pmc_suspend(void);
+void tegra_pmc_resume(void);
void tegra_pmc_pm_set(enum tegra_suspend_mode mode);
void tegra_pmc_suspend_init(void);
#endif
diff --git a/arch/arm/mach-tegra/reset-handler.S b/arch/arm/mach-tegra/reset-handler.S
index 39dc9e7..f527b2c 100644
--- a/arch/arm/mach-tegra/reset-handler.S
+++ b/arch/arm/mach-tegra/reset-handler.S
@@ -40,9 +40,12 @@
* re-enabling sdram.
*
* r6: SoC ID
+ * r8: CPU part number
*/
ENTRY(tegra_resume)
- bl v7_invalidate_l1
+ check_cpu_part_num 0xc09, r8, r9
+ bleq v7_invalidate_l1
+ blne tegra_init_l2_for_a15
cpu_id r0
tegra_get_soc_id TEGRA_APB_MISC_BASE, r6
@@ -70,7 +73,8 @@
str r1, [r2]
1:
- check_cpu_part_num 0xc09, r8, r9
+ mov32 r9, 0xc09
+ cmp r8, r9
bne not_ca9
#ifdef CONFIG_HAVE_ARM_SCU
/* enable SCU */
@@ -178,6 +182,19 @@
1:
#endif
+ /* Waking up from LP1? */
+ ldr r8, [r12, #RESET_DATA(MASK_LP1)]
+ tst r8, r11 @ if in_lp1
+ beq __is_not_lp1
+ cmp r10, #0
+ bne __die @ only CPU0 can be here
+ ldr lr, [r12, #RESET_DATA(STARTUP_LP1)]
+ cmp lr, #0
+ bleq __die @ no LP1 startup handler
+ THUMB( add lr, lr, #1 ) @ switch to Thumb mode
+ bx lr
+__is_not_lp1:
+
/* Waking up from LP2? */
ldr r9, [r12, #RESET_DATA(MASK_LP2)]
tst r9, r11 @ if in_lp2
diff --git a/arch/arm/mach-tegra/reset.c b/arch/arm/mach-tegra/reset.c
index 1ac434e..fd0bbf8 100644
--- a/arch/arm/mach-tegra/reset.c
+++ b/arch/arm/mach-tegra/reset.c
@@ -81,6 +81,8 @@
#endif
#ifdef CONFIG_PM_SLEEP
+ __tegra_cpu_reset_handler_data[TEGRA_RESET_STARTUP_LP1] =
+ TEGRA_IRAM_CODE_AREA;
__tegra_cpu_reset_handler_data[TEGRA_RESET_STARTUP_LP2] =
virt_to_phys((void *)tegra_resume);
#endif
diff --git a/arch/arm/mach-tegra/reset.h b/arch/arm/mach-tegra/reset.h
index c90d8e9..76a9343 100644
--- a/arch/arm/mach-tegra/reset.h
+++ b/arch/arm/mach-tegra/reset.h
@@ -39,6 +39,10 @@
void tegra_secondary_startup(void);
#ifdef CONFIG_PM_SLEEP
+#define tegra_cpu_lp1_mask \
+ (IO_ADDRESS(TEGRA_IRAM_BASE + TEGRA_IRAM_RESET_HANDLER_OFFSET + \
+ ((u32)&__tegra_cpu_reset_handler_data[TEGRA_RESET_MASK_LP1] - \
+ (u32)__tegra_cpu_reset_handler_start)))
#define tegra_cpu_lp2_mask \
(IO_ADDRESS(TEGRA_IRAM_BASE + TEGRA_IRAM_RESET_HANDLER_OFFSET + \
((u32)&__tegra_cpu_reset_handler_data[TEGRA_RESET_MASK_LP2] - \
diff --git a/arch/arm/mach-tegra/sleep-tegra20.S b/arch/arm/mach-tegra/sleep-tegra20.S
index e3f2417..5c3bd11 100644
--- a/arch/arm/mach-tegra/sleep-tegra20.S
+++ b/arch/arm/mach-tegra/sleep-tegra20.S
@@ -23,10 +23,49 @@
#include <asm/assembler.h>
#include <asm/proc-fns.h>
#include <asm/cp15.h>
+#include <asm/cache.h>
#include "sleep.h"
#include "flowctrl.h"
+#define EMC_CFG 0xc
+#define EMC_ADR_CFG 0x10
+#define EMC_REFRESH 0x70
+#define EMC_NOP 0xdc
+#define EMC_SELF_REF 0xe0
+#define EMC_REQ_CTRL 0x2b0
+#define EMC_EMC_STATUS 0x2b4
+
+#define CLK_RESET_CCLK_BURST 0x20
+#define CLK_RESET_CCLK_DIVIDER 0x24
+#define CLK_RESET_SCLK_BURST 0x28
+#define CLK_RESET_SCLK_DIVIDER 0x2c
+#define CLK_RESET_PLLC_BASE 0x80
+#define CLK_RESET_PLLM_BASE 0x90
+#define CLK_RESET_PLLP_BASE 0xa0
+
+#define APB_MISC_XM2CFGCPADCTRL 0x8c8
+#define APB_MISC_XM2CFGDPADCTRL 0x8cc
+#define APB_MISC_XM2CLKCFGPADCTRL 0x8d0
+#define APB_MISC_XM2COMPPADCTRL 0x8d4
+#define APB_MISC_XM2VTTGENPADCTRL 0x8d8
+#define APB_MISC_XM2CFGCPADCTRL2 0x8e4
+#define APB_MISC_XM2CFGDPADCTRL2 0x8e8
+
+.macro pll_enable, rd, r_car_base, pll_base
+ ldr \rd, [\r_car_base, #\pll_base]
+ tst \rd, #(1 << 30)
+ orreq \rd, \rd, #(1 << 30)
+ streq \rd, [\r_car_base, #\pll_base]
+.endm
+
+.macro emc_device_mask, rd, base
+ ldr \rd, [\base, #EMC_ADR_CFG]
+ tst \rd, #(0x3 << 24)
+ moveq \rd, #(0x1 << 8) @ just 1 device
+ movne \rd, #(0x3 << 8) @ 2 devices
+.endm
+
#if defined(CONFIG_HOTPLUG_CPU) || defined(CONFIG_PM_SLEEP)
/*
* tegra20_hotplug_shutdown(void)
@@ -181,6 +220,28 @@
ENDPROC(tegra20_cpu_is_resettable_soon)
/*
+ * tegra20_sleep_core_finish(unsigned long v2p)
+ *
+ * Enters suspend in LP0 or LP1 by turning off the mmu and jumping to
+ * tegra20_tear_down_core in IRAM
+ */
+ENTRY(tegra20_sleep_core_finish)
+ /* Flush, disable the L1 data cache and exit SMP */
+ bl tegra_disable_clean_inv_dcache
+
+ mov32 r3, tegra_shut_off_mmu
+ add r3, r3, r0
+
+ mov32 r0, tegra20_tear_down_core
+ mov32 r1, tegra20_iram_start
+ sub r0, r0, r1
+ mov32 r1, TEGRA_IRAM_CODE_AREA
+ add r0, r0, r1
+
+ mov pc, r3
+ENDPROC(tegra20_sleep_core_finish)
+
+/*
* tegra20_sleep_cpu_secondary_finish(unsigned long v2p)
*
* Enters WFI on secondary CPU by exiting coherency.
@@ -191,6 +252,7 @@
mrc p15, 0, r11, c1, c0, 1 @ save actlr before exiting coherency
/* Flush and disable the L1 data cache */
+ mov r0, #TEGRA_FLUSH_CACHE_LOUIS
bl tegra_disable_clean_inv_dcache
mov32 r0, TEGRA_PMC_VIRT + PMC_SCRATCH41
@@ -250,6 +312,150 @@
b tegra20_enter_sleep
ENDPROC(tegra20_tear_down_cpu)
+/* START OF ROUTINES COPIED TO IRAM */
+ .align L1_CACHE_SHIFT
+ .globl tegra20_iram_start
+tegra20_iram_start:
+
+/*
+ * tegra20_lp1_reset
+ *
+ * reset vector for LP1 restore; copied into IRAM during suspend.
+ * Brings the system back up to a safe staring point (SDRAM out of
+ * self-refresh, PLLC, PLLM and PLLP reenabled, CPU running on PLLP,
+ * system clock running on the same PLL that it suspended at), and
+ * jumps to tegra_resume to restore virtual addressing and PLLX.
+ * The physical address of tegra_resume expected to be stored in
+ * PMC_SCRATCH41.
+ *
+ * NOTE: THIS *MUST* BE RELOCATED TO TEGRA_IRAM_CODE_AREA.
+ */
+ENTRY(tegra20_lp1_reset)
+ /*
+ * The CPU and system bus are running at 32KHz and executing from
+ * IRAM when this code is executed; immediately switch to CLKM and
+ * enable PLLM, PLLP, PLLC.
+ */
+ mov32 r0, TEGRA_CLK_RESET_BASE
+
+ mov r1, #(1 << 28)
+ str r1, [r0, #CLK_RESET_SCLK_BURST]
+ str r1, [r0, #CLK_RESET_CCLK_BURST]
+ mov r1, #0
+ str r1, [r0, #CLK_RESET_CCLK_DIVIDER]
+ str r1, [r0, #CLK_RESET_SCLK_DIVIDER]
+
+ pll_enable r1, r0, CLK_RESET_PLLM_BASE
+ pll_enable r1, r0, CLK_RESET_PLLP_BASE
+ pll_enable r1, r0, CLK_RESET_PLLC_BASE
+
+ adr r2, tegra20_sdram_pad_address
+ adr r4, tegra20_sdram_pad_save
+ mov r5, #0
+
+ ldr r6, tegra20_sdram_pad_size
+padload:
+ ldr r7, [r2, r5] @ r7 is the addr in the pad_address
+
+ ldr r1, [r4, r5]
+ str r1, [r7] @ restore the value in pad_save
+
+ add r5, r5, #4
+ cmp r6, r5
+ bne padload
+
+padload_done:
+ /* 255uS delay for PLL stabilization */
+ mov32 r7, TEGRA_TMRUS_BASE
+ ldr r1, [r7]
+ add r1, r1, #0xff
+ wait_until r1, r7, r9
+
+ adr r4, tegra20_sclk_save
+ ldr r4, [r4]
+ str r4, [r0, #CLK_RESET_SCLK_BURST]
+ mov32 r4, ((1 << 28) | (4)) @ burst policy is PLLP
+ str r4, [r0, #CLK_RESET_CCLK_BURST]
+
+ mov32 r0, TEGRA_EMC_BASE
+ ldr r1, [r0, #EMC_CFG]
+ bic r1, r1, #(1 << 31) @ disable DRAM_CLK_STOP
+ str r1, [r0, #EMC_CFG]
+
+ mov r1, #0
+ str r1, [r0, #EMC_SELF_REF] @ take DRAM out of self refresh
+ mov r1, #1
+ str r1, [r0, #EMC_NOP]
+ str r1, [r0, #EMC_NOP]
+ str r1, [r0, #EMC_REFRESH]
+
+ emc_device_mask r1, r0
+
+exit_selfrefresh_loop:
+ ldr r2, [r0, #EMC_EMC_STATUS]
+ ands r2, r2, r1
+ bne exit_selfrefresh_loop
+
+ mov r1, #0 @ unstall all transactions
+ str r1, [r0, #EMC_REQ_CTRL]
+
+ mov32 r0, TEGRA_PMC_BASE
+ ldr r0, [r0, #PMC_SCRATCH41]
+ mov pc, r0 @ jump to tegra_resume
+ENDPROC(tegra20_lp1_reset)
+
+/*
+ * tegra20_tear_down_core
+ *
+ * copied into and executed from IRAM
+ * puts memory in self-refresh for LP0 and LP1
+ */
+tegra20_tear_down_core:
+ bl tegra20_sdram_self_refresh
+ bl tegra20_switch_cpu_to_clk32k
+ b tegra20_enter_sleep
+
+/*
+ * tegra20_switch_cpu_to_clk32k
+ *
+ * In LP0 and LP1 all PLLs will be turned off. Switch the CPU and system clock
+ * to the 32KHz clock.
+ */
+tegra20_switch_cpu_to_clk32k:
+ /*
+ * start by switching to CLKM to safely disable PLLs, then switch to
+ * CLKS.
+ */
+ mov r0, #(1 << 28)
+ str r0, [r5, #CLK_RESET_SCLK_BURST]
+ str r0, [r5, #CLK_RESET_CCLK_BURST]
+ mov r0, #0
+ str r0, [r5, #CLK_RESET_CCLK_DIVIDER]
+ str r0, [r5, #CLK_RESET_SCLK_DIVIDER]
+
+ /* 2uS delay delay between changing SCLK and disabling PLLs */
+ mov32 r7, TEGRA_TMRUS_BASE
+ ldr r1, [r7]
+ add r1, r1, #2
+ wait_until r1, r7, r9
+
+ /* disable PLLM, PLLP and PLLC */
+ ldr r0, [r5, #CLK_RESET_PLLM_BASE]
+ bic r0, r0, #(1 << 30)
+ str r0, [r5, #CLK_RESET_PLLM_BASE]
+ ldr r0, [r5, #CLK_RESET_PLLP_BASE]
+ bic r0, r0, #(1 << 30)
+ str r0, [r5, #CLK_RESET_PLLP_BASE]
+ ldr r0, [r5, #CLK_RESET_PLLC_BASE]
+ bic r0, r0, #(1 << 30)
+ str r0, [r5, #CLK_RESET_PLLC_BASE]
+
+ /* switch to CLKS */
+ mov r0, #0 /* brust policy = 32KHz */
+ str r0, [r5, #CLK_RESET_SCLK_BURST]
+
+ mov pc, lr
+
/*
* tegra20_enter_sleep
*
@@ -274,4 +480,95 @@
isb
b halted
+/*
+ * tegra20_sdram_self_refresh
+ *
+ * called with MMU off and caches disabled
+ * puts sdram in self refresh
+ * must be executed from IRAM
+ */
+tegra20_sdram_self_refresh:
+ mov32 r1, TEGRA_EMC_BASE @ r1 reserved for emc base addr
+
+ mov r2, #3
+ str r2, [r1, #EMC_REQ_CTRL] @ stall incoming DRAM requests
+
+emcidle:
+ ldr r2, [r1, #EMC_EMC_STATUS]
+ tst r2, #4
+ beq emcidle
+
+ mov r2, #1
+ str r2, [r1, #EMC_SELF_REF]
+
+ emc_device_mask r2, r1
+
+emcself:
+ ldr r3, [r1, #EMC_EMC_STATUS]
+ and r3, r3, r2
+ cmp r3, r2
+ bne emcself @ loop until DDR in self-refresh
+
+ adr r2, tegra20_sdram_pad_address
+ adr r3, tegra20_sdram_pad_safe
+ adr r4, tegra20_sdram_pad_save
+ mov r5, #0
+
+ ldr r6, tegra20_sdram_pad_size
+padsave:
+ ldr r0, [r2, r5] @ r0 is the addr in the pad_address
+
+ ldr r1, [r0]
+ str r1, [r4, r5] @ save the content of the addr
+
+ ldr r1, [r3, r5]
+ str r1, [r0] @ set the save val to the addr
+
+ add r5, r5, #4
+ cmp r6, r5
+ bne padsave
+padsave_done:
+
+ mov32 r5, TEGRA_CLK_RESET_BASE
+ ldr r0, [r5, #CLK_RESET_SCLK_BURST]
+ adr r2, tegra20_sclk_save
+ str r0, [r2]
+ dsb
+ mov pc, lr
+
+tegra20_sdram_pad_address:
+ .word TEGRA_APB_MISC_BASE + APB_MISC_XM2CFGCPADCTRL
+ .word TEGRA_APB_MISC_BASE + APB_MISC_XM2CFGDPADCTRL
+ .word TEGRA_APB_MISC_BASE + APB_MISC_XM2CLKCFGPADCTRL
+ .word TEGRA_APB_MISC_BASE + APB_MISC_XM2COMPPADCTRL
+ .word TEGRA_APB_MISC_BASE + APB_MISC_XM2VTTGENPADCTRL
+ .word TEGRA_APB_MISC_BASE + APB_MISC_XM2CFGCPADCTRL2
+ .word TEGRA_APB_MISC_BASE + APB_MISC_XM2CFGDPADCTRL2
+
+tegra20_sdram_pad_size:
+ .word tegra20_sdram_pad_size - tegra20_sdram_pad_address
+
+tegra20_sdram_pad_safe:
+ .word 0x8
+ .word 0x8
+ .word 0x0
+ .word 0x8
+ .word 0x5500
+ .word 0x08080040
+ .word 0x0
+
+tegra20_sclk_save:
+ .word 0x0
+
+tegra20_sdram_pad_save:
+ .rept (tegra20_sdram_pad_size - tegra20_sdram_pad_address) / 4
+ .long 0
+ .endr
+
+ .ltorg
+/* dummy symbol for end of IRAM */
+ .align L1_CACHE_SHIFT
+ .globl tegra20_iram_end
+tegra20_iram_end:
+ b .
#endif
diff --git a/arch/arm/mach-tegra/sleep-tegra30.S b/arch/arm/mach-tegra/sleep-tegra30.S
index ada8821..63fa91b 100644
--- a/arch/arm/mach-tegra/sleep-tegra30.S
+++ b/arch/arm/mach-tegra/sleep-tegra30.S
@@ -18,13 +18,118 @@
#include <asm/assembler.h>
#include <asm/asm-offsets.h>
+#include <asm/cache.h>
#include "fuse.h"
#include "sleep.h"
#include "flowctrl.h"
+#define EMC_CFG 0xc
+#define EMC_ADR_CFG 0x10
+#define EMC_TIMING_CONTROL 0x28
+#define EMC_REFRESH 0x70
+#define EMC_NOP 0xdc
+#define EMC_SELF_REF 0xe0
+#define EMC_MRW 0xe8
+#define EMC_FBIO_CFG5 0x104
+#define EMC_AUTO_CAL_CONFIG 0x2a4
+#define EMC_AUTO_CAL_INTERVAL 0x2a8
+#define EMC_AUTO_CAL_STATUS 0x2ac
+#define EMC_REQ_CTRL 0x2b0
+#define EMC_CFG_DIG_DLL 0x2bc
+#define EMC_EMC_STATUS 0x2b4
+#define EMC_ZCAL_INTERVAL 0x2e0
+#define EMC_ZQ_CAL 0x2ec
+#define EMC_XM2VTTGENPADCTRL 0x310
+#define EMC_XM2VTTGENPADCTRL2 0x314
+
+#define PMC_CTRL 0x0
+#define PMC_CTRL_SIDE_EFFECT_LP0 (1 << 14) /* enter LP0 when CPU pwr gated */
+
+#define PMC_PLLP_WB0_OVERRIDE 0xf8
+#define PMC_IO_DPD_REQ 0x1b8
+#define PMC_IO_DPD_STATUS 0x1bc
+
+#define CLK_RESET_CCLK_BURST 0x20
+#define CLK_RESET_CCLK_DIVIDER 0x24
+#define CLK_RESET_SCLK_BURST 0x28
+#define CLK_RESET_SCLK_DIVIDER 0x2c
+
+#define CLK_RESET_PLLC_BASE 0x80
+#define CLK_RESET_PLLC_MISC 0x8c
+#define CLK_RESET_PLLM_BASE 0x90
+#define CLK_RESET_PLLM_MISC 0x9c
+#define CLK_RESET_PLLP_BASE 0xa0
+#define CLK_RESET_PLLP_MISC 0xac
+#define CLK_RESET_PLLA_BASE 0xb0
+#define CLK_RESET_PLLA_MISC 0xbc
+#define CLK_RESET_PLLX_BASE 0xe0
+#define CLK_RESET_PLLX_MISC 0xe4
+#define CLK_RESET_PLLX_MISC3 0x518
+#define CLK_RESET_PLLX_MISC3_IDDQ 3
+#define CLK_RESET_PLLM_MISC_IDDQ 5
+#define CLK_RESET_PLLC_MISC_IDDQ 26
+
+#define CLK_RESET_CLK_SOURCE_MSELECT 0x3b4
+
+#define MSELECT_CLKM (0x3 << 30)
+
+#define LOCK_DELAY 50 /* safety delay after lock is detected */
+
#define TEGRA30_POWER_HOTPLUG_SHUTDOWN (1 << 27) /* Hotplug shutdown */
+.macro emc_device_mask, rd, base
+ ldr \rd, [\base, #EMC_ADR_CFG]
+ tst \rd, #0x1
+ moveq \rd, #(0x1 << 8) @ just 1 device
+ movne \rd, #(0x3 << 8) @ 2 devices
+.endm
+
+.macro emc_timing_update, rd, base
+ mov \rd, #1
+ str \rd, [\base, #EMC_TIMING_CONTROL]
+1001:
+ ldr \rd, [\base, #EMC_EMC_STATUS]
+ tst \rd, #(0x1<<23) @ wait EMC_STATUS_TIMING_UPDATE_STALLED is clear
+ bne 1001b
+.endm
+
+.macro pll_enable, rd, r_car_base, pll_base, pll_misc
+ ldr \rd, [\r_car_base, #\pll_base]
+ tst \rd, #(1 << 30)
+ orreq \rd, \rd, #(1 << 30)
+ streq \rd, [\r_car_base, #\pll_base]
+ /* Enable lock detector */
+ .if \pll_misc
+ ldr \rd, [\r_car_base, #\pll_misc]
+ bic \rd, \rd, #(1 << 18)
+ str \rd, [\r_car_base, #\pll_misc]
+ ldr \rd, [\r_car_base, #\pll_misc]
+ ldr \rd, [\r_car_base, #\pll_misc]
+ orr \rd, \rd, #(1 << 18)
+ str \rd, [\r_car_base, #\pll_misc]
+ .endif
+.endm
+
+.macro pll_locked, rd, r_car_base, pll_base
+1:
+ ldr \rd, [\r_car_base, #\pll_base]
+ tst \rd, #(1 << 27)
+ beq 1b
+.endm
+
+.macro pll_iddq_exit, rd, car, iddq, iddq_bit
+ ldr \rd, [\car, #\iddq]
+ bic \rd, \rd, #(1<<\iddq_bit)
+ str \rd, [\car, #\iddq]
+.endm
+
+.macro pll_iddq_entry, rd, car, iddq, iddq_bit
+ ldr \rd, [\car, #\iddq]
+ orr \rd, \rd, #(1<<\iddq_bit)
+ str \rd, [\car, #\iddq]
+.endm
+
#if defined(CONFIG_HOTPLUG_CPU) || defined(CONFIG_PM_SLEEP)
/*
* tegra30_hotplug_shutdown(void)
@@ -99,6 +204,8 @@
cmp r10, #TEGRA30
moveq r3, #FLOW_CTRL_WAIT_FOR_INTERRUPT @ For LP2
movne r3, #FLOW_CTRL_WAITEVENT
+ orrne r3, r3, #FLOW_CTRL_HALT_GIC_IRQ
+ orrne r3, r3, #FLOW_CTRL_HALT_GIC_FIQ
flow_ctrl_done:
cmp r10, #TEGRA30
str r3, [r2]
@@ -127,6 +234,41 @@
#ifdef CONFIG_PM_SLEEP
/*
+ * tegra30_sleep_core_finish(unsigned long v2p)
+ *
+ * Enters suspend in LP0 or LP1 by turning off the MMU and jumping to
+ * tegra30_tear_down_core in IRAM
+ */
+ENTRY(tegra30_sleep_core_finish)
+ /* Flush, disable the L1 data cache and exit SMP */
+ bl tegra_disable_clean_inv_dcache
+
+ /*
+ * Preload all the address literals that are needed for the
+ * CPU power-gating process, to avoid loading from SDRAM which
+ * are not supported once SDRAM is put into self-refresh.
+ * LP0 / LP1 use physical address, since the MMU needs to be
+ * disabled before putting SDRAM into self-refresh to avoid
+ * memory access due to page table walks.
+ */
+ mov32 r4, TEGRA_PMC_BASE
+ mov32 r5, TEGRA_CLK_RESET_BASE
+ mov32 r6, TEGRA_FLOW_CTRL_BASE
+ mov32 r7, TEGRA_TMRUS_BASE
+
+ mov32 r3, tegra_shut_off_mmu
+ add r3, r3, r0
+
+ mov32 r0, tegra30_tear_down_core
+ mov32 r1, tegra30_iram_start
+ sub r0, r0, r1
+ mov32 r1, TEGRA_IRAM_CODE_AREA
+ add r0, r0, r1
+
+ mov pc, r3
+ENDPROC(tegra30_sleep_core_finish)
+
+/*
* tegra30_sleep_cpu_secondary_finish(unsigned long v2p)
*
* Enters LP2 on secondary CPU by exiting coherency and powergating the CPU.
@@ -135,6 +277,7 @@
mov r7, lr
/* Flush and disable the L1 data cache */
+ mov r0, #TEGRA_FLUSH_CACHE_LOUIS
bl tegra_disable_clean_inv_dcache
/* Powergate this CPU. */
@@ -155,6 +298,351 @@
b tegra30_enter_sleep
ENDPROC(tegra30_tear_down_cpu)
+/* START OF ROUTINES COPIED TO IRAM */
+ .align L1_CACHE_SHIFT
+ .globl tegra30_iram_start
+tegra30_iram_start:
+
+/*
+ * tegra30_lp1_reset
+ *
+ * reset vector for LP1 restore; copied into IRAM during suspend.
+ * Brings the system back up to a safe staring point (SDRAM out of
+ * self-refresh, PLLC, PLLM and PLLP reenabled, CPU running on PLLX,
+ * system clock running on the same PLL that it suspended at), and
+ * jumps to tegra_resume to restore virtual addressing.
+ * The physical address of tegra_resume expected to be stored in
+ * PMC_SCRATCH41.
+ *
+ * NOTE: THIS *MUST* BE RELOCATED TO TEGRA_IRAM_CODE_AREA.
+ */
+ENTRY(tegra30_lp1_reset)
+ /*
+ * The CPU and system bus are running at 32KHz and executing from
+ * IRAM when this code is executed; immediately switch to CLKM and
+ * enable PLLP, PLLM, PLLC, PLLA and PLLX.
+ */
+ mov32 r0, TEGRA_CLK_RESET_BASE
+
+ mov r1, #(1 << 28)
+ str r1, [r0, #CLK_RESET_SCLK_BURST]
+ str r1, [r0, #CLK_RESET_CCLK_BURST]
+ mov r1, #0
+ str r1, [r0, #CLK_RESET_CCLK_DIVIDER]
+ str r1, [r0, #CLK_RESET_SCLK_DIVIDER]
+
+ tegra_get_soc_id TEGRA_APB_MISC_BASE, r10
+ cmp r10, #TEGRA30
+ beq _no_pll_iddq_exit
+
+ pll_iddq_exit r1, r0, CLK_RESET_PLLM_MISC, CLK_RESET_PLLM_MISC_IDDQ
+ pll_iddq_exit r1, r0, CLK_RESET_PLLC_MISC, CLK_RESET_PLLC_MISC_IDDQ
+ pll_iddq_exit r1, r0, CLK_RESET_PLLX_MISC3, CLK_RESET_PLLX_MISC3_IDDQ
+
+ mov32 r7, TEGRA_TMRUS_BASE
+ ldr r1, [r7]
+ add r1, r1, #2
+ wait_until r1, r7, r3
+
+ /* enable PLLM via PMC */
+ mov32 r2, TEGRA_PMC_BASE
+ ldr r1, [r2, #PMC_PLLP_WB0_OVERRIDE]
+ orr r1, r1, #(1 << 12)
+ str r1, [r2, #PMC_PLLP_WB0_OVERRIDE]
+
+ pll_enable r1, r0, CLK_RESET_PLLM_BASE, 0
+ pll_enable r1, r0, CLK_RESET_PLLC_BASE, 0
+ pll_enable r1, r0, CLK_RESET_PLLX_BASE, 0
+
+ b _pll_m_c_x_done
+
+_no_pll_iddq_exit:
+ /* enable PLLM via PMC */
+ mov32 r2, TEGRA_PMC_BASE
+ ldr r1, [r2, #PMC_PLLP_WB0_OVERRIDE]
+ orr r1, r1, #(1 << 12)
+ str r1, [r2, #PMC_PLLP_WB0_OVERRIDE]
+
+ pll_enable r1, r0, CLK_RESET_PLLM_BASE, CLK_RESET_PLLM_MISC
+ pll_enable r1, r0, CLK_RESET_PLLC_BASE, CLK_RESET_PLLC_MISC
+ pll_enable r1, r0, CLK_RESET_PLLX_BASE, CLK_RESET_PLLX_MISC
+
+_pll_m_c_x_done:
+ pll_enable r1, r0, CLK_RESET_PLLP_BASE, CLK_RESET_PLLP_MISC
+ pll_enable r1, r0, CLK_RESET_PLLA_BASE, CLK_RESET_PLLA_MISC
+
+ pll_locked r1, r0, CLK_RESET_PLLM_BASE
+ pll_locked r1, r0, CLK_RESET_PLLP_BASE
+ pll_locked r1, r0, CLK_RESET_PLLA_BASE
+ pll_locked r1, r0, CLK_RESET_PLLC_BASE
+ pll_locked r1, r0, CLK_RESET_PLLX_BASE
+
+ mov32 r7, TEGRA_TMRUS_BASE
+ ldr r1, [r7]
+ add r1, r1, #LOCK_DELAY
+ wait_until r1, r7, r3
+
+ adr r5, tegra30_sdram_pad_save
+
+ ldr r4, [r5, #0x18] @ restore CLK_SOURCE_MSELECT
+ str r4, [r0, #CLK_RESET_CLK_SOURCE_MSELECT]
+
+ ldr r4, [r5, #0x1C] @ restore SCLK_BURST
+ str r4, [r0, #CLK_RESET_SCLK_BURST]
+
+ cmp r10, #TEGRA30
+ movweq r4, #:lower16:((1 << 28) | (0x8)) @ burst policy is PLLX
+ movteq r4, #:upper16:((1 << 28) | (0x8))
+ movwne r4, #:lower16:((1 << 28) | (0xe))
+ movtne r4, #:upper16:((1 << 28) | (0xe))
+ str r4, [r0, #CLK_RESET_CCLK_BURST]
+
+ /* Restore pad power state to normal */
+ ldr r1, [r5, #0x14] @ PMC_IO_DPD_STATUS
+ mvn r1, r1
+ bic r1, r1, #(1 << 31)
+ orr r1, r1, #(1 << 30)
+ str r1, [r2, #PMC_IO_DPD_REQ] @ DPD_OFF
+
+ cmp r10, #TEGRA30
+ movweq r0, #:lower16:TEGRA_EMC_BASE @ r0 reserved for emc base
+ movteq r0, #:upper16:TEGRA_EMC_BASE
+ movwne r0, #:lower16:TEGRA_EMC0_BASE
+ movtne r0, #:upper16:TEGRA_EMC0_BASE
+
+exit_self_refresh:
+ ldr r1, [r5, #0xC] @ restore EMC_XM2VTTGENPADCTRL
+ str r1, [r0, #EMC_XM2VTTGENPADCTRL]
+ ldr r1, [r5, #0x10] @ restore EMC_XM2VTTGENPADCTRL2
+ str r1, [r0, #EMC_XM2VTTGENPADCTRL2]
+ ldr r1, [r5, #0x8] @ restore EMC_AUTO_CAL_INTERVAL
+ str r1, [r0, #EMC_AUTO_CAL_INTERVAL]
+
+ /* Relock DLL */
+ ldr r1, [r0, #EMC_CFG_DIG_DLL]
+ orr r1, r1, #(1 << 30) @ set DLL_RESET
+ str r1, [r0, #EMC_CFG_DIG_DLL]
+
+ emc_timing_update r1, r0
+
+ cmp r10, #TEGRA114
+ movweq r1, #:lower16:TEGRA_EMC1_BASE
+ movteq r1, #:upper16:TEGRA_EMC1_BASE
+ cmpeq r0, r1
+
+ ldr r1, [r0, #EMC_AUTO_CAL_CONFIG]
+ orr r1, r1, #(1 << 31) @ set AUTO_CAL_ACTIVE
+ orreq r1, r1, #(1 << 27) @ set slave mode for channel 1
+ str r1, [r0, #EMC_AUTO_CAL_CONFIG]
+
+emc_wait_auto_cal_onetime:
+ ldr r1, [r0, #EMC_AUTO_CAL_STATUS]
+ tst r1, #(1 << 31) @ wait until AUTO_CAL_ACTIVE is cleared
+ bne emc_wait_auto_cal_onetime
+
+ ldr r1, [r0, #EMC_CFG]
+ bic r1, r1, #(1 << 31) @ disable DRAM_CLK_STOP_PD
+ str r1, [r0, #EMC_CFG]
+
+ mov r1, #0
+ str r1, [r0, #EMC_SELF_REF] @ take DRAM out of self refresh
+ mov r1, #1
+ cmp r10, #TEGRA30
+ streq r1, [r0, #EMC_NOP]
+ streq r1, [r0, #EMC_NOP]
+ streq r1, [r0, #EMC_REFRESH]
+
+ emc_device_mask r1, r0
+
+exit_selfrefresh_loop:
+ ldr r2, [r0, #EMC_EMC_STATUS]
+ ands r2, r2, r1
+ bne exit_selfrefresh_loop
+
+ lsr r1, r1, #8 @ devSel, bit0:dev0, bit1:dev1
+
+ mov32 r7, TEGRA_TMRUS_BASE
+ ldr r2, [r0, #EMC_FBIO_CFG5]
+
+ and r2, r2, #3 @ check DRAM_TYPE
+ cmp r2, #2
+ beq emc_lpddr2
+
+ /* Issue a ZQ_CAL for dev0 - DDR3 */
+ mov32 r2, 0x80000011 @ DEV_SELECTION=2, LENGTH=LONG, CMD=1
+ str r2, [r0, #EMC_ZQ_CAL]
+ ldr r2, [r7]
+ add r2, r2, #10
+ wait_until r2, r7, r3
+
+ tst r1, #2
+ beq zcal_done
+
+ /* Issue a ZQ_CAL for dev1 - DDR3 */
+ mov32 r2, 0x40000011 @ DEV_SELECTION=1, LENGTH=LONG, CMD=1
+ str r2, [r0, #EMC_ZQ_CAL]
+ ldr r2, [r7]
+ add r2, r2, #10
+ wait_until r2, r7, r3
+ b zcal_done
+
+emc_lpddr2:
+ /* Issue a ZQ_CAL for dev0 - LPDDR2 */
+ mov32 r2, 0x800A00AB @ DEV_SELECTION=2, MA=10, OP=0xAB
+ str r2, [r0, #EMC_MRW]
+ ldr r2, [r7]
+ add r2, r2, #1
+ wait_until r2, r7, r3
+
+ tst r1, #2
+ beq zcal_done
+
+ /* Issue a ZQ_CAL for dev0 - LPDDR2 */
+ mov32 r2, 0x400A00AB @ DEV_SELECTION=1, MA=10, OP=0xAB
+ str r2, [r0, #EMC_MRW]
+ ldr r2, [r7]
+ add r2, r2, #1
+ wait_until r2, r7, r3
+
+zcal_done:
+ mov r1, #0 @ unstall all transactions
+ str r1, [r0, #EMC_REQ_CTRL]
+ ldr r1, [r5, #0x4] @ restore EMC_ZCAL_INTERVAL
+ str r1, [r0, #EMC_ZCAL_INTERVAL]
+ ldr r1, [r5, #0x0] @ restore EMC_CFG
+ str r1, [r0, #EMC_CFG]
+
+ /* Tegra114 had dual EMC channel, now config the other one */
+ cmp r10, #TEGRA114
+ bne __no_dual_emc_chanl
+ mov32 r1, TEGRA_EMC1_BASE
+ cmp r0, r1
+ movne r0, r1
+ addne r5, r5, #0x20
+ bne exit_self_refresh
+__no_dual_emc_chanl:
+
+ mov32 r0, TEGRA_PMC_BASE
+ ldr r0, [r0, #PMC_SCRATCH41]
+ mov pc, r0 @ jump to tegra_resume
+ENDPROC(tegra30_lp1_reset)
+
+ .align L1_CACHE_SHIFT
+tegra30_sdram_pad_address:
+ .word TEGRA_EMC_BASE + EMC_CFG @0x0
+ .word TEGRA_EMC_BASE + EMC_ZCAL_INTERVAL @0x4
+ .word TEGRA_EMC_BASE + EMC_AUTO_CAL_INTERVAL @0x8
+ .word TEGRA_EMC_BASE + EMC_XM2VTTGENPADCTRL @0xc
+ .word TEGRA_EMC_BASE + EMC_XM2VTTGENPADCTRL2 @0x10
+ .word TEGRA_PMC_BASE + PMC_IO_DPD_STATUS @0x14
+ .word TEGRA_CLK_RESET_BASE + CLK_RESET_CLK_SOURCE_MSELECT @0x18
+ .word TEGRA_CLK_RESET_BASE + CLK_RESET_SCLK_BURST @0x1c
+
+tegra114_sdram_pad_address:
+ .word TEGRA_EMC0_BASE + EMC_CFG @0x0
+ .word TEGRA_EMC0_BASE + EMC_ZCAL_INTERVAL @0x4
+ .word TEGRA_EMC0_BASE + EMC_AUTO_CAL_INTERVAL @0x8
+ .word TEGRA_EMC0_BASE + EMC_XM2VTTGENPADCTRL @0xc
+ .word TEGRA_EMC0_BASE + EMC_XM2VTTGENPADCTRL2 @0x10
+ .word TEGRA_PMC_BASE + PMC_IO_DPD_STATUS @0x14
+ .word TEGRA_CLK_RESET_BASE + CLK_RESET_CLK_SOURCE_MSELECT @0x18
+ .word TEGRA_CLK_RESET_BASE + CLK_RESET_SCLK_BURST @0x1c
+ .word TEGRA_EMC1_BASE + EMC_CFG @0x20
+ .word TEGRA_EMC1_BASE + EMC_ZCAL_INTERVAL @0x24
+ .word TEGRA_EMC1_BASE + EMC_AUTO_CAL_INTERVAL @0x28
+ .word TEGRA_EMC1_BASE + EMC_XM2VTTGENPADCTRL @0x2c
+ .word TEGRA_EMC1_BASE + EMC_XM2VTTGENPADCTRL2 @0x30
+
+tegra30_sdram_pad_size:
+ .word tegra114_sdram_pad_address - tegra30_sdram_pad_address
+
+tegra114_sdram_pad_size:
+ .word tegra30_sdram_pad_size - tegra114_sdram_pad_address
+
+ .type tegra30_sdram_pad_save, %object
+tegra30_sdram_pad_save:
+ .rept (tegra30_sdram_pad_size - tegra114_sdram_pad_address) / 4
+ .long 0
+ .endr
+
+/*
+ * tegra30_tear_down_core
+ *
+ * copied into and executed from IRAM
+ * puts memory in self-refresh for LP0 and LP1
+ */
+tegra30_tear_down_core:
+ bl tegra30_sdram_self_refresh
+ bl tegra30_switch_cpu_to_clk32k
+ b tegra30_enter_sleep
+
+/*
+ * tegra30_switch_cpu_to_clk32k
+ *
+ * In LP0 and LP1 all PLLs will be turned off. Switching the CPU and System CLK
+ * to the 32KHz clock.
+ * r4 = TEGRA_PMC_BASE
+ * r5 = TEGRA_CLK_RESET_BASE
+ * r6 = TEGRA_FLOW_CTRL_BASE
+ * r7 = TEGRA_TMRUS_BASE
+ * r10= SoC ID
+ */
+tegra30_switch_cpu_to_clk32k:
+ /*
+ * start by jumping to CLKM to safely disable PLLs, then jump to
+ * CLKS.
+ */
+ mov r0, #(1 << 28)
+ str r0, [r5, #CLK_RESET_SCLK_BURST]
+ /* 2uS delay delay between changing SCLK and CCLK */
+ ldr r1, [r7]
+ add r1, r1, #2
+ wait_until r1, r7, r9
+ str r0, [r5, #CLK_RESET_CCLK_BURST]
+ mov r0, #0
+ str r0, [r5, #CLK_RESET_CCLK_DIVIDER]
+ str r0, [r5, #CLK_RESET_SCLK_DIVIDER]
+
+ /* switch the clock source of mselect to be CLK_M */
+ ldr r0, [r5, #CLK_RESET_CLK_SOURCE_MSELECT]
+ orr r0, r0, #MSELECT_CLKM
+ str r0, [r5, #CLK_RESET_CLK_SOURCE_MSELECT]
+
+ /* 2uS delay delay between changing SCLK and disabling PLLs */
+ ldr r1, [r7]
+ add r1, r1, #2
+ wait_until r1, r7, r9
+
+ /* disable PLLM via PMC in LP1 */
+ ldr r0, [r4, #PMC_PLLP_WB0_OVERRIDE]
+ bic r0, r0, #(1 << 12)
+ str r0, [r4, #PMC_PLLP_WB0_OVERRIDE]
+
+ /* disable PLLP, PLLA, PLLC and PLLX */
+ ldr r0, [r5, #CLK_RESET_PLLP_BASE]
+ bic r0, r0, #(1 << 30)
+ str r0, [r5, #CLK_RESET_PLLP_BASE]
+ ldr r0, [r5, #CLK_RESET_PLLA_BASE]
+ bic r0, r0, #(1 << 30)
+ str r0, [r5, #CLK_RESET_PLLA_BASE]
+ ldr r0, [r5, #CLK_RESET_PLLC_BASE]
+ bic r0, r0, #(1 << 30)
+ str r0, [r5, #CLK_RESET_PLLC_BASE]
+ ldr r0, [r5, #CLK_RESET_PLLX_BASE]
+ bic r0, r0, #(1 << 30)
+ str r0, [r5, #CLK_RESET_PLLX_BASE]
+
+ cmp r10, #TEGRA30
+ beq _no_pll_in_iddq
+ pll_iddq_entry r1, r5, CLK_RESET_PLLX_MISC3, CLK_RESET_PLLX_MISC3_IDDQ
+_no_pll_in_iddq:
+
+ /* switch to CLKS */
+ mov r0, #0 /* brust policy = 32KHz */
+ str r0, [r5, #CLK_RESET_SCLK_BURST]
+
+ mov pc, lr
+
/*
* tegra30_enter_sleep
*
@@ -172,8 +660,12 @@
orr r0, r0, #FLOW_CTRL_CSR_ENABLE
str r0, [r6, r2]
+ tegra_get_soc_id TEGRA_APB_MISC_BASE, r10
+ cmp r10, #TEGRA30
mov r0, #FLOW_CTRL_WAIT_FOR_INTERRUPT
- orr r0, r0, #FLOW_CTRL_HALT_CPU_IRQ | FLOW_CTRL_HALT_CPU_FIQ
+ orreq r0, r0, #FLOW_CTRL_HALT_CPU_IRQ | FLOW_CTRL_HALT_CPU_FIQ
+ orrne r0, r0, #FLOW_CTRL_HALT_LIC_IRQ | FLOW_CTRL_HALT_LIC_FIQ
+
cpu_to_halt_reg r2, r1
str r0, [r6, r2]
dsb
@@ -187,4 +679,126 @@
/* !!!FIXME!!! Implement halt failure handler */
b halted
+/*
+ * tegra30_sdram_self_refresh
+ *
+ * called with MMU off and caches disabled
+ * must be executed from IRAM
+ * r4 = TEGRA_PMC_BASE
+ * r5 = TEGRA_CLK_RESET_BASE
+ * r6 = TEGRA_FLOW_CTRL_BASE
+ * r7 = TEGRA_TMRUS_BASE
+ * r10= SoC ID
+ */
+tegra30_sdram_self_refresh:
+
+ adr r8, tegra30_sdram_pad_save
+ tegra_get_soc_id TEGRA_APB_MISC_BASE, r10
+ cmp r10, #TEGRA30
+ adreq r2, tegra30_sdram_pad_address
+ ldreq r3, tegra30_sdram_pad_size
+ adrne r2, tegra114_sdram_pad_address
+ ldrne r3, tegra114_sdram_pad_size
+ mov r9, #0
+
+padsave:
+ ldr r0, [r2, r9] @ r0 is the addr in the pad_address
+
+ ldr r1, [r0]
+ str r1, [r8, r9] @ save the content of the addr
+
+ add r9, r9, #4
+ cmp r3, r9
+ bne padsave
+padsave_done:
+
+ dsb
+
+ cmp r10, #TEGRA30
+ ldreq r0, =TEGRA_EMC_BASE @ r0 reserved for emc base addr
+ ldrne r0, =TEGRA_EMC0_BASE
+
+enter_self_refresh:
+ cmp r10, #TEGRA30
+ mov r1, #0
+ str r1, [r0, #EMC_ZCAL_INTERVAL]
+ str r1, [r0, #EMC_AUTO_CAL_INTERVAL]
+ ldr r1, [r0, #EMC_CFG]
+ bic r1, r1, #(1 << 28)
+ bicne r1, r1, #(1 << 29)
+ str r1, [r0, #EMC_CFG] @ disable DYN_SELF_REF
+
+ emc_timing_update r1, r0
+
+ ldr r1, [r7]
+ add r1, r1, #5
+ wait_until r1, r7, r2
+
+emc_wait_auto_cal:
+ ldr r1, [r0, #EMC_AUTO_CAL_STATUS]
+ tst r1, #(1 << 31) @ wait until AUTO_CAL_ACTIVE is cleared
+ bne emc_wait_auto_cal
+
+ mov r1, #3
+ str r1, [r0, #EMC_REQ_CTRL] @ stall incoming DRAM requests
+
+emcidle:
+ ldr r1, [r0, #EMC_EMC_STATUS]
+ tst r1, #4
+ beq emcidle
+
+ mov r1, #1
+ str r1, [r0, #EMC_SELF_REF]
+
+ emc_device_mask r1, r0
+
+emcself:
+ ldr r2, [r0, #EMC_EMC_STATUS]
+ and r2, r2, r1
+ cmp r2, r1
+ bne emcself @ loop until DDR in self-refresh
+
+ /* Put VTTGEN in the lowest power mode */
+ ldr r1, [r0, #EMC_XM2VTTGENPADCTRL]
+ mov32 r2, 0xF8F8FFFF @ clear XM2VTTGEN_DRVUP and XM2VTTGEN_DRVDN
+ and r1, r1, r2
+ str r1, [r0, #EMC_XM2VTTGENPADCTRL]
+ ldr r1, [r0, #EMC_XM2VTTGENPADCTRL2]
+ cmp r10, #TEGRA30
+ orreq r1, r1, #7 @ set E_NO_VTTGEN
+ orrne r1, r1, #0x3f
+ str r1, [r0, #EMC_XM2VTTGENPADCTRL2]
+
+ emc_timing_update r1, r0
+
+ /* Tegra114 had dual EMC channel, now config the other one */
+ cmp r10, #TEGRA114
+ bne no_dual_emc_chanl
+ mov32 r1, TEGRA_EMC1_BASE
+ cmp r0, r1
+ movne r0, r1
+ bne enter_self_refresh
+no_dual_emc_chanl:
+
+ ldr r1, [r4, #PMC_CTRL]
+ tst r1, #PMC_CTRL_SIDE_EFFECT_LP0
+ bne pmc_io_dpd_skip
+ /*
+ * Put DDR_DATA, DISC_ADDR_CMD, DDR_ADDR_CMD, POP_ADDR_CMD, POP_CLK
+ * and COMP in the lowest power mode when LP1.
+ */
+ mov32 r1, 0x8EC00000
+ str r1, [r4, #PMC_IO_DPD_REQ]
+pmc_io_dpd_skip:
+
+ dsb
+
+ mov pc, lr
+
+ .ltorg
+/* dummy symbol for end of IRAM */
+ .align L1_CACHE_SHIFT
+ .global tegra30_iram_end
+tegra30_iram_end:
+ b .
#endif
diff --git a/arch/arm/mach-tegra/sleep.S b/arch/arm/mach-tegra/sleep.S
index 9daaef2..8d06213 100644
--- a/arch/arm/mach-tegra/sleep.S
+++ b/arch/arm/mach-tegra/sleep.S
@@ -56,7 +56,9 @@
isb
/* Flush the D-cache */
- bl v7_flush_dcache_louis
+ cmp r0, #TEGRA_FLUSH_CACHE_ALL
+ blne v7_flush_dcache_louis
+ bleq v7_flush_dcache_all
/* Trun off coherency */
exit_smp r4, r5
@@ -67,15 +69,40 @@
#ifdef CONFIG_PM_SLEEP
/*
+ * tegra_init_l2_for_a15
+ *
+ * set up the correct L2 cache data RAM latency
+ */
+ENTRY(tegra_init_l2_for_a15)
+ mrc p15, 0, r0, c0, c0, 5
+ ubfx r0, r0, #8, #4
+ tst r0, #1 @ only need for cluster 0
+ bne _exit_init_l2_a15
+
+ mrc p15, 0x1, r0, c9, c0, 2
+ and r0, r0, #7
+ cmp r0, #2
+ bicne r0, r0, #7
+ orrne r0, r0, #2
+ mcrne p15, 0x1, r0, c9, c0, 2
+_exit_init_l2_a15:
+
+ mov pc, lr
+ENDPROC(tegra_init_l2_for_a15)
+
+/*
* tegra_sleep_cpu_finish(unsigned long v2p)
*
* enters suspend in LP2 by turning off the mmu and jumping to
* tegra?_tear_down_cpu
*/
ENTRY(tegra_sleep_cpu_finish)
+ mov r4, r0
/* Flush and disable the L1 data cache */
+ mov r0, #TEGRA_FLUSH_CACHE_ALL
bl tegra_disable_clean_inv_dcache
+ mov r0, r4
mov32 r6, tegra_tear_down_cpu
ldr r1, [r6]
add r1, r1, r0
@@ -107,10 +134,10 @@
#ifdef CONFIG_CACHE_L2X0
/* Disable L2 cache */
check_cpu_part_num 0xc09, r9, r10
- movweq r4, #:lower16:(TEGRA_ARM_PERIF_BASE + 0x3000)
- movteq r4, #:upper16:(TEGRA_ARM_PERIF_BASE + 0x3000)
- moveq r5, #0
- streq r5, [r4, #L2X0_CTRL]
+ movweq r2, #:lower16:(TEGRA_ARM_PERIF_BASE + 0x3000)
+ movteq r2, #:upper16:(TEGRA_ARM_PERIF_BASE + 0x3000)
+ moveq r3, #0
+ streq r3, [r2, #L2X0_CTRL]
#endif
mov pc, r0
ENDPROC(tegra_shut_off_mmu)
diff --git a/arch/arm/mach-tegra/sleep.h b/arch/arm/mach-tegra/sleep.h
index 98b7da6..a4edbb3 100644
--- a/arch/arm/mach-tegra/sleep.h
+++ b/arch/arm/mach-tegra/sleep.h
@@ -41,7 +41,19 @@
#define CPU_NOT_RESETTABLE 0
#endif
+/* flag of tegra_disable_clean_inv_dcache to do LoUIS or all */
+#define TEGRA_FLUSH_CACHE_LOUIS 0
+#define TEGRA_FLUSH_CACHE_ALL 1
+
#ifdef __ASSEMBLY__
+/* waits until the microsecond counter (base) is > rn */
+.macro wait_until, rn, base, tmp
+ add \rn, \rn, #1
+1001: ldr \tmp, [\base]
+ cmp \tmp, \rn
+ bmi 1001b
+.endm
+
/* returns the offset of the flow controller halt register for a cpu */
.macro cpu_to_halt_reg rd, rcpu
cmp \rcpu, #0
@@ -144,7 +156,7 @@
void tegra_pen_unlock(void);
void tegra_resume(void);
int tegra_sleep_cpu_finish(unsigned long);
-void tegra_disable_clean_inv_dcache(void);
+void tegra_disable_clean_inv_dcache(u32 flag);
#ifdef CONFIG_HOTPLUG_CPU
void tegra20_hotplug_shutdown(void);
diff --git a/arch/arm/mach-tegra/tegra.c b/arch/arm/mach-tegra/tegra.c
index fc97cfd..5b86055 100644
--- a/arch/arm/mach-tegra/tegra.c
+++ b/arch/arm/mach-tegra/tegra.c
@@ -80,28 +80,6 @@
of_platform_populate(NULL, of_default_bus_match_table, NULL, parent);
}
-static void __init trimslice_init(void)
-{
-#ifdef CONFIG_TEGRA_PCI
- int ret;
-
- ret = tegra_pcie_init(true, true);
- if (ret)
- pr_err("tegra_pci_init() failed: %d\n", ret);
-#endif
-}
-
-static void __init harmony_init(void)
-{
-#ifdef CONFIG_TEGRA_PCI
- int ret;
-
- ret = harmony_pcie_init();
- if (ret)
- pr_err("harmony_pcie_init() failed: %d\n", ret);
-#endif
-}
-
static void __init paz00_init(void)
{
if (IS_ENABLED(CONFIG_ARCH_TEGRA_2x_SOC))
@@ -112,8 +90,6 @@
char *machine;
void (*init)(void);
} board_init_funcs[] = {
- { "compulab,trimslice", trimslice_init },
- { "nvidia,harmony", harmony_init },
{ "compal,paz00", paz00_init },
};
diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c
index df5d27a..4e7ab3a 100644
--- a/arch/arm/mach-ux500/board-mop500.c
+++ b/arch/arm/mach-ux500/board-mop500.c
@@ -42,7 +42,6 @@
#include <linux/platform_data/dma-ste-dma40.h>
#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
#include "setup.h"
#include "devices.h"
@@ -686,6 +685,7 @@
.init_time = ux500_timer_init,
.init_machine = mop500_init_machine,
.init_late = ux500_init_late,
+ .restart = ux500_restart,
MACHINE_END
MACHINE_START(U8520, "ST-Ericsson U8520 Platform HREFP520")
@@ -695,6 +695,7 @@
.init_time = ux500_timer_init,
.init_machine = mop500_init_machine,
.init_late = ux500_init_late,
+ .restart = ux500_restart,
MACHINE_END
MACHINE_START(HREFV60, "ST-Ericsson U8500 Platform HREFv60+")
@@ -705,6 +706,7 @@
.init_time = ux500_timer_init,
.init_machine = hrefv60_init_machine,
.init_late = ux500_init_late,
+ .restart = ux500_restart,
MACHINE_END
MACHINE_START(SNOWBALL, "Calao Systems Snowball platform")
@@ -716,4 +718,5 @@
.init_time = ux500_timer_init,
.init_machine = snowball_init_machine,
.init_late = NULL,
+ .restart = ux500_restart,
MACHINE_END
diff --git a/arch/arm/mach-ux500/cpu-db8500.c b/arch/arm/mach-ux500/cpu-db8500.c
index 2061b6a..bfaf95d 100644
--- a/arch/arm/mach-ux500/cpu-db8500.c
+++ b/arch/arm/mach-ux500/cpu-db8500.c
@@ -26,7 +26,6 @@
#include <asm/pmu.h>
#include <asm/mach/map.h>
-#include <asm/mach/arch.h>
#include "setup.h"
#include "devices.h"
@@ -325,6 +324,7 @@
.init_machine = u8500_init_machine,
.init_late = NULL,
.dt_compat = stericsson_dt_platform_compat,
+ .restart = ux500_restart,
MACHINE_END
#endif
diff --git a/arch/arm/mach-ux500/cpu.c b/arch/arm/mach-ux500/cpu.c
index e6fb023..5d7eebc 100644
--- a/arch/arm/mach-ux500/cpu.c
+++ b/arch/arm/mach-ux500/cpu.c
@@ -31,6 +31,14 @@
#include "db8500-regs.h"
#include "id.h"
+void ux500_restart(enum reboot_mode mode, const char *cmd)
+{
+ local_irq_disable();
+ local_fiq_disable();
+
+ prcmu_system_reset(0);
+}
+
/*
* FIXME: Should we set up the GPIO domain here?
*
diff --git a/arch/arm/mach-ux500/devices-db8500.c b/arch/arm/mach-ux500/devices-db8500.c
index 516a6f5..bc31606 100644
--- a/arch/arm/mach-ux500/devices-db8500.c
+++ b/arch/arm/mach-ux500/devices-db8500.c
@@ -49,6 +49,7 @@
struct platform_device u8500_dma40_device = {
.dev = {
.platform_data = &dma40_plat_data,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
},
.name = "dma40",
.id = 0,
diff --git a/arch/arm/mach-ux500/headsmp.S b/arch/arm/mach-ux500/headsmp.S
index 08da5589..9cdea04 100644
--- a/arch/arm/mach-ux500/headsmp.S
+++ b/arch/arm/mach-ux500/headsmp.S
@@ -11,8 +11,6 @@
#include <linux/linkage.h>
#include <linux/init.h>
- __INIT
-
/*
* U8500 specific entry point for secondary CPUs.
*/
diff --git a/arch/arm/mach-ux500/setup.h b/arch/arm/mach-ux500/setup.h
index cad3ca8..656324a 100644
--- a/arch/arm/mach-ux500/setup.h
+++ b/arch/arm/mach-ux500/setup.h
@@ -11,10 +11,13 @@
#ifndef __ASM_ARCH_SETUP_H
#define __ASM_ARCH_SETUP_H
+#include <asm/mach/arch.h>
#include <asm/mach/time.h>
#include <linux/init.h>
#include <linux/mfd/abx500/ab8500.h>
+void ux500_restart(enum reboot_mode mode, const char *cmd);
+
void __init ux500_map_io(void);
extern void __init u8500_map_io(void);
diff --git a/arch/arm/mach-vexpress/Kconfig b/arch/arm/mach-vexpress/Kconfig
index 83c8677..3657954 100644
--- a/arch/arm/mach-vexpress/Kconfig
+++ b/arch/arm/mach-vexpress/Kconfig
@@ -66,4 +66,12 @@
This is needed to provide CPU and cluster power management
on RTSM implementing big.LITTLE.
+config ARCH_VEXPRESS_TC2_PM
+ bool "Versatile Express TC2 power management"
+ depends on MCPM
+ select ARM_CCI
+ help
+ Support for CPU and cluster power management on Versatile Express
+ with a TC2 (A15x2 A7x3) big.LITTLE core tile.
+
endmenu
diff --git a/arch/arm/mach-vexpress/Makefile b/arch/arm/mach-vexpress/Makefile
index 48ba89a..36ea824 100644
--- a/arch/arm/mach-vexpress/Makefile
+++ b/arch/arm/mach-vexpress/Makefile
@@ -7,5 +7,6 @@
obj-y := v2m.o
obj-$(CONFIG_ARCH_VEXPRESS_CA9X4) += ct-ca9x4.o
obj-$(CONFIG_ARCH_VEXPRESS_DCSCB) += dcscb.o dcscb_setup.o
+obj-$(CONFIG_ARCH_VEXPRESS_TC2_PM) += tc2_pm.o spc.o
obj-$(CONFIG_SMP) += platsmp.o
obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o
diff --git a/arch/arm/mach-vexpress/dcscb.c b/arch/arm/mach-vexpress/dcscb.c
index 16d57a8..3a6384c 100644
--- a/arch/arm/mach-vexpress/dcscb.c
+++ b/arch/arm/mach-vexpress/dcscb.c
@@ -136,14 +136,35 @@
/*
* Flush all cache levels for this cluster.
*
- * A15/A7 can hit in the cache with SCTLR.C=0, so we don't need
- * a preliminary flush here for those CPUs. At least, that's
- * the theory -- without the extra flush, Linux explodes on
- * RTSM (to be investigated).
+ * To do so we do:
+ * - Clear the SCTLR.C bit to prevent further cache allocations
+ * - Flush the whole cache
+ * - Clear the ACTLR "SMP" bit to disable local coherency
+ *
+ * Let's do it in the safest possible way i.e. with
+ * no memory access within the following sequence
+ * including to the stack.
+ *
+ * Note: fp is preserved to the stack explicitly prior doing
+ * this since adding it to the clobber list is incompatible
+ * with having CONFIG_FRAME_POINTER=y.
*/
- flush_cache_all();
- set_cr(get_cr() & ~CR_C);
- flush_cache_all();
+ asm volatile(
+ "str fp, [sp, #-4]! \n\t"
+ "mrc p15, 0, r0, c1, c0, 0 @ get CR \n\t"
+ "bic r0, r0, #"__stringify(CR_C)" \n\t"
+ "mcr p15, 0, r0, c1, c0, 0 @ set CR \n\t"
+ "isb \n\t"
+ "bl v7_flush_dcache_all \n\t"
+ "clrex \n\t"
+ "mrc p15, 0, r0, c1, c0, 1 @ get AUXCR \n\t"
+ "bic r0, r0, #(1 << 6) @ disable local coherency \n\t"
+ "mcr p15, 0, r0, c1, c0, 1 @ set AUXCR \n\t"
+ "isb \n\t"
+ "dsb \n\t"
+ "ldr fp, [sp], #4"
+ : : : "r0","r1","r2","r3","r4","r5","r6","r7",
+ "r9","r10","lr","memory");
/*
* This is a harmless no-op. On platforms with a real
@@ -152,9 +173,6 @@
*/
outer_flush_all();
- /* Disable local coherency by clearing the ACTLR "SMP" bit: */
- set_auxcr(get_auxcr() & ~(1 << 6));
-
/*
* Disable cluster-level coherency by masking
* incoming snoops and DVM messages:
@@ -167,18 +185,24 @@
/*
* Flush the local CPU cache.
- *
- * A15/A7 can hit in the cache with SCTLR.C=0, so we don't need
- * a preliminary flush here for those CPUs. At least, that's
- * the theory -- without the extra flush, Linux explodes on
- * RTSM (to be investigated).
+ * Let's do it in the safest possible way as above.
*/
- flush_cache_louis();
- set_cr(get_cr() & ~CR_C);
- flush_cache_louis();
-
- /* Disable local coherency by clearing the ACTLR "SMP" bit: */
- set_auxcr(get_auxcr() & ~(1 << 6));
+ asm volatile(
+ "str fp, [sp, #-4]! \n\t"
+ "mrc p15, 0, r0, c1, c0, 0 @ get CR \n\t"
+ "bic r0, r0, #"__stringify(CR_C)" \n\t"
+ "mcr p15, 0, r0, c1, c0, 0 @ set CR \n\t"
+ "isb \n\t"
+ "bl v7_flush_dcache_louis \n\t"
+ "clrex \n\t"
+ "mrc p15, 0, r0, c1, c0, 1 @ get AUXCR \n\t"
+ "bic r0, r0, #(1 << 6) @ disable local coherency \n\t"
+ "mcr p15, 0, r0, c1, c0, 1 @ set AUXCR \n\t"
+ "isb \n\t"
+ "dsb \n\t"
+ "ldr fp, [sp], #4"
+ : : : "r0","r1","r2","r3","r4","r5","r6","r7",
+ "r9","r10","lr","memory");
}
__mcpm_cpu_down(cpu, cluster);
diff --git a/arch/arm/mach-vexpress/spc.c b/arch/arm/mach-vexpress/spc.c
new file mode 100644
index 0000000..eefb029
--- /dev/null
+++ b/arch/arm/mach-vexpress/spc.c
@@ -0,0 +1,180 @@
+/*
+ * Versatile Express Serial Power Controller (SPC) support
+ *
+ * Copyright (C) 2013 ARM Ltd.
+ *
+ * Authors: Sudeep KarkadaNagesha <sudeep.karkadanagesha@arm.com>
+ * Achin Gupta <achin.gupta@arm.com>
+ * Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/slab.h>
+
+#include <asm/cacheflush.h>
+
+#define SPCLOG "vexpress-spc: "
+
+/* SPC wake-up IRQs status and mask */
+#define WAKE_INT_MASK 0x24
+#define WAKE_INT_RAW 0x28
+#define WAKE_INT_STAT 0x2c
+/* SPC power down registers */
+#define A15_PWRDN_EN 0x30
+#define A7_PWRDN_EN 0x34
+/* SPC per-CPU mailboxes */
+#define A15_BX_ADDR0 0x68
+#define A7_BX_ADDR0 0x78
+
+/* wake-up interrupt masks */
+#define GBL_WAKEUP_INT_MSK (0x3 << 10)
+
+/* TC2 static dual-cluster configuration */
+#define MAX_CLUSTERS 2
+
+struct ve_spc_drvdata {
+ void __iomem *baseaddr;
+ /*
+ * A15s cluster identifier
+ * It corresponds to A15 processors MPIDR[15:8] bitfield
+ */
+ u32 a15_clusid;
+};
+
+static struct ve_spc_drvdata *info;
+
+static inline bool cluster_is_a15(u32 cluster)
+{
+ return cluster == info->a15_clusid;
+}
+
+/**
+ * ve_spc_global_wakeup_irq()
+ *
+ * Function to set/clear global wakeup IRQs. Not protected by locking since
+ * it might be used in code paths where normal cacheable locks are not
+ * working. Locking must be provided by the caller to ensure atomicity.
+ *
+ * @set: if true, global wake-up IRQs are set, if false they are cleared
+ */
+void ve_spc_global_wakeup_irq(bool set)
+{
+ u32 reg;
+
+ reg = readl_relaxed(info->baseaddr + WAKE_INT_MASK);
+
+ if (set)
+ reg |= GBL_WAKEUP_INT_MSK;
+ else
+ reg &= ~GBL_WAKEUP_INT_MSK;
+
+ writel_relaxed(reg, info->baseaddr + WAKE_INT_MASK);
+}
+
+/**
+ * ve_spc_cpu_wakeup_irq()
+ *
+ * Function to set/clear per-CPU wake-up IRQs. Not protected by locking since
+ * it might be used in code paths where normal cacheable locks are not
+ * working. Locking must be provided by the caller to ensure atomicity.
+ *
+ * @cluster: mpidr[15:8] bitfield describing cluster affinity level
+ * @cpu: mpidr[7:0] bitfield describing cpu affinity level
+ * @set: if true, wake-up IRQs are set, if false they are cleared
+ */
+void ve_spc_cpu_wakeup_irq(u32 cluster, u32 cpu, bool set)
+{
+ u32 mask, reg;
+
+ if (cluster >= MAX_CLUSTERS)
+ return;
+
+ mask = 1 << cpu;
+
+ if (!cluster_is_a15(cluster))
+ mask <<= 4;
+
+ reg = readl_relaxed(info->baseaddr + WAKE_INT_MASK);
+
+ if (set)
+ reg |= mask;
+ else
+ reg &= ~mask;
+
+ writel_relaxed(reg, info->baseaddr + WAKE_INT_MASK);
+}
+
+/**
+ * ve_spc_set_resume_addr() - set the jump address used for warm boot
+ *
+ * @cluster: mpidr[15:8] bitfield describing cluster affinity level
+ * @cpu: mpidr[7:0] bitfield describing cpu affinity level
+ * @addr: physical resume address
+ */
+void ve_spc_set_resume_addr(u32 cluster, u32 cpu, u32 addr)
+{
+ void __iomem *baseaddr;
+
+ if (cluster >= MAX_CLUSTERS)
+ return;
+
+ if (cluster_is_a15(cluster))
+ baseaddr = info->baseaddr + A15_BX_ADDR0 + (cpu << 2);
+ else
+ baseaddr = info->baseaddr + A7_BX_ADDR0 + (cpu << 2);
+
+ writel_relaxed(addr, baseaddr);
+}
+
+/**
+ * ve_spc_powerdown()
+ *
+ * Function to enable/disable cluster powerdown. Not protected by locking
+ * since it might be used in code paths where normal cacheable locks are not
+ * working. Locking must be provided by the caller to ensure atomicity.
+ *
+ * @cluster: mpidr[15:8] bitfield describing cluster affinity level
+ * @enable: if true enables powerdown, if false disables it
+ */
+void ve_spc_powerdown(u32 cluster, bool enable)
+{
+ u32 pwdrn_reg;
+
+ if (cluster >= MAX_CLUSTERS)
+ return;
+
+ pwdrn_reg = cluster_is_a15(cluster) ? A15_PWRDN_EN : A7_PWRDN_EN;
+ writel_relaxed(enable, info->baseaddr + pwdrn_reg);
+}
+
+int __init ve_spc_init(void __iomem *baseaddr, u32 a15_clusid)
+{
+ info = kzalloc(sizeof(*info), GFP_KERNEL);
+ if (!info) {
+ pr_err(SPCLOG "unable to allocate mem\n");
+ return -ENOMEM;
+ }
+
+ info->baseaddr = baseaddr;
+ info->a15_clusid = a15_clusid;
+
+ /*
+ * Multi-cluster systems may need this data when non-coherent, during
+ * cluster power-up/power-down. Make sure driver info reaches main
+ * memory.
+ */
+ sync_cache_w(info);
+ sync_cache_w(&info);
+
+ return 0;
+}
diff --git a/arch/arm/mach-vexpress/spc.h b/arch/arm/mach-vexpress/spc.h
new file mode 100644
index 0000000..5f7e4a4
--- /dev/null
+++ b/arch/arm/mach-vexpress/spc.h
@@ -0,0 +1,24 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Copyright (C) 2012 ARM Limited
+ */
+
+
+#ifndef __SPC_H_
+#define __SPC_H_
+
+int __init ve_spc_init(void __iomem *base, u32 a15_clusid);
+void ve_spc_global_wakeup_irq(bool set);
+void ve_spc_cpu_wakeup_irq(u32 cluster, u32 cpu, bool set);
+void ve_spc_set_resume_addr(u32 cluster, u32 cpu, u32 addr);
+void ve_spc_powerdown(u32 cluster, bool enable);
+
+#endif
diff --git a/arch/arm/mach-vexpress/tc2_pm.c b/arch/arm/mach-vexpress/tc2_pm.c
new file mode 100644
index 0000000..2b7c93a
--- /dev/null
+++ b/arch/arm/mach-vexpress/tc2_pm.c
@@ -0,0 +1,352 @@
+/*
+ * arch/arm/mach-vexpress/tc2_pm.c - TC2 power management support
+ *
+ * Created by: Nicolas Pitre, October 2012
+ * Copyright: (C) 2012-2013 Linaro Limited
+ *
+ * Some portions of this file were originally written by Achin Gupta
+ * Copyright: (C) 2012 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/of_address.h>
+#include <linux/spinlock.h>
+#include <linux/errno.h>
+
+#include <asm/mcpm.h>
+#include <asm/proc-fns.h>
+#include <asm/cacheflush.h>
+#include <asm/cputype.h>
+#include <asm/cp15.h>
+
+#include <linux/arm-cci.h>
+
+#include "spc.h"
+
+/* SCC conf registers */
+#define A15_CONF 0x400
+#define A7_CONF 0x500
+#define SYS_INFO 0x700
+#define SPC_BASE 0xb00
+
+/*
+ * We can't use regular spinlocks. In the switcher case, it is possible
+ * for an outbound CPU to call power_down() after its inbound counterpart
+ * is already live using the same logical CPU number which trips lockdep
+ * debugging.
+ */
+static arch_spinlock_t tc2_pm_lock = __ARCH_SPIN_LOCK_UNLOCKED;
+
+#define TC2_CLUSTERS 2
+#define TC2_MAX_CPUS_PER_CLUSTER 3
+
+static unsigned int tc2_nr_cpus[TC2_CLUSTERS];
+
+/* Keep per-cpu usage count to cope with unordered up/down requests */
+static int tc2_pm_use_count[TC2_MAX_CPUS_PER_CLUSTER][TC2_CLUSTERS];
+
+#define tc2_cluster_unused(cluster) \
+ (!tc2_pm_use_count[0][cluster] && \
+ !tc2_pm_use_count[1][cluster] && \
+ !tc2_pm_use_count[2][cluster])
+
+static int tc2_pm_power_up(unsigned int cpu, unsigned int cluster)
+{
+ pr_debug("%s: cpu %u cluster %u\n", __func__, cpu, cluster);
+ if (cluster >= TC2_CLUSTERS || cpu >= tc2_nr_cpus[cluster])
+ return -EINVAL;
+
+ /*
+ * Since this is called with IRQs enabled, and no arch_spin_lock_irq
+ * variant exists, we need to disable IRQs manually here.
+ */
+ local_irq_disable();
+ arch_spin_lock(&tc2_pm_lock);
+
+ if (tc2_cluster_unused(cluster))
+ ve_spc_powerdown(cluster, false);
+
+ tc2_pm_use_count[cpu][cluster]++;
+ if (tc2_pm_use_count[cpu][cluster] == 1) {
+ ve_spc_set_resume_addr(cluster, cpu,
+ virt_to_phys(mcpm_entry_point));
+ ve_spc_cpu_wakeup_irq(cluster, cpu, true);
+ } else if (tc2_pm_use_count[cpu][cluster] != 2) {
+ /*
+ * The only possible values are:
+ * 0 = CPU down
+ * 1 = CPU (still) up
+ * 2 = CPU requested to be up before it had a chance
+ * to actually make itself down.
+ * Any other value is a bug.
+ */
+ BUG();
+ }
+
+ arch_spin_unlock(&tc2_pm_lock);
+ local_irq_enable();
+
+ return 0;
+}
+
+static void tc2_pm_down(u64 residency)
+{
+ unsigned int mpidr, cpu, cluster;
+ bool last_man = false, skip_wfi = false;
+
+ mpidr = read_cpuid_mpidr();
+ cpu = MPIDR_AFFINITY_LEVEL(mpidr, 0);
+ cluster = MPIDR_AFFINITY_LEVEL(mpidr, 1);
+
+ pr_debug("%s: cpu %u cluster %u\n", __func__, cpu, cluster);
+ BUG_ON(cluster >= TC2_CLUSTERS || cpu >= TC2_MAX_CPUS_PER_CLUSTER);
+
+ __mcpm_cpu_going_down(cpu, cluster);
+
+ arch_spin_lock(&tc2_pm_lock);
+ BUG_ON(__mcpm_cluster_state(cluster) != CLUSTER_UP);
+ tc2_pm_use_count[cpu][cluster]--;
+ if (tc2_pm_use_count[cpu][cluster] == 0) {
+ ve_spc_cpu_wakeup_irq(cluster, cpu, true);
+ if (tc2_cluster_unused(cluster)) {
+ ve_spc_powerdown(cluster, true);
+ ve_spc_global_wakeup_irq(true);
+ last_man = true;
+ }
+ } else if (tc2_pm_use_count[cpu][cluster] == 1) {
+ /*
+ * A power_up request went ahead of us.
+ * Even if we do not want to shut this CPU down,
+ * the caller expects a certain state as if the WFI
+ * was aborted. So let's continue with cache cleaning.
+ */
+ skip_wfi = true;
+ } else
+ BUG();
+
+ if (last_man && __mcpm_outbound_enter_critical(cpu, cluster)) {
+ arch_spin_unlock(&tc2_pm_lock);
+
+ if (read_cpuid_part_number() == ARM_CPU_PART_CORTEX_A15) {
+ /*
+ * On the Cortex-A15 we need to disable
+ * L2 prefetching before flushing the cache.
+ */
+ asm volatile(
+ "mcr p15, 1, %0, c15, c0, 3 \n\t"
+ "isb \n\t"
+ "dsb "
+ : : "r" (0x400) );
+ }
+
+ /*
+ * We need to disable and flush the whole (L1 and L2) cache.
+ * Let's do it in the safest possible way i.e. with
+ * no memory access within the following sequence
+ * including the stack.
+ *
+ * Note: fp is preserved to the stack explicitly prior doing
+ * this since adding it to the clobber list is incompatible
+ * with having CONFIG_FRAME_POINTER=y.
+ */
+ asm volatile(
+ "str fp, [sp, #-4]! \n\t"
+ "mrc p15, 0, r0, c1, c0, 0 @ get CR \n\t"
+ "bic r0, r0, #"__stringify(CR_C)" \n\t"
+ "mcr p15, 0, r0, c1, c0, 0 @ set CR \n\t"
+ "isb \n\t"
+ "bl v7_flush_dcache_all \n\t"
+ "clrex \n\t"
+ "mrc p15, 0, r0, c1, c0, 1 @ get AUXCR \n\t"
+ "bic r0, r0, #(1 << 6) @ disable local coherency \n\t"
+ "mcr p15, 0, r0, c1, c0, 1 @ set AUXCR \n\t"
+ "isb \n\t"
+ "dsb \n\t"
+ "ldr fp, [sp], #4"
+ : : : "r0","r1","r2","r3","r4","r5","r6","r7",
+ "r9","r10","lr","memory");
+
+ cci_disable_port_by_cpu(mpidr);
+
+ __mcpm_outbound_leave_critical(cluster, CLUSTER_DOWN);
+ } else {
+ /*
+ * If last man then undo any setup done previously.
+ */
+ if (last_man) {
+ ve_spc_powerdown(cluster, false);
+ ve_spc_global_wakeup_irq(false);
+ }
+
+ arch_spin_unlock(&tc2_pm_lock);
+
+ /*
+ * We need to disable and flush only the L1 cache.
+ * Let's do it in the safest possible way as above.
+ */
+ asm volatile(
+ "str fp, [sp, #-4]! \n\t"
+ "mrc p15, 0, r0, c1, c0, 0 @ get CR \n\t"
+ "bic r0, r0, #"__stringify(CR_C)" \n\t"
+ "mcr p15, 0, r0, c1, c0, 0 @ set CR \n\t"
+ "isb \n\t"
+ "bl v7_flush_dcache_louis \n\t"
+ "clrex \n\t"
+ "mrc p15, 0, r0, c1, c0, 1 @ get AUXCR \n\t"
+ "bic r0, r0, #(1 << 6) @ disable local coherency \n\t"
+ "mcr p15, 0, r0, c1, c0, 1 @ set AUXCR \n\t"
+ "isb \n\t"
+ "dsb \n\t"
+ "ldr fp, [sp], #4"
+ : : : "r0","r1","r2","r3","r4","r5","r6","r7",
+ "r9","r10","lr","memory");
+ }
+
+ __mcpm_cpu_down(cpu, cluster);
+
+ /* Now we are prepared for power-down, do it: */
+ if (!skip_wfi)
+ wfi();
+
+ /* Not dead at this point? Let our caller cope. */
+}
+
+static void tc2_pm_power_down(void)
+{
+ tc2_pm_down(0);
+}
+
+static void tc2_pm_suspend(u64 residency)
+{
+ unsigned int mpidr, cpu, cluster;
+
+ mpidr = read_cpuid_mpidr();
+ cpu = MPIDR_AFFINITY_LEVEL(mpidr, 0);
+ cluster = MPIDR_AFFINITY_LEVEL(mpidr, 1);
+ ve_spc_set_resume_addr(cluster, cpu, virt_to_phys(mcpm_entry_point));
+ tc2_pm_down(residency);
+}
+
+static void tc2_pm_powered_up(void)
+{
+ unsigned int mpidr, cpu, cluster;
+ unsigned long flags;
+
+ mpidr = read_cpuid_mpidr();
+ cpu = MPIDR_AFFINITY_LEVEL(mpidr, 0);
+ cluster = MPIDR_AFFINITY_LEVEL(mpidr, 1);
+
+ pr_debug("%s: cpu %u cluster %u\n", __func__, cpu, cluster);
+ BUG_ON(cluster >= TC2_CLUSTERS || cpu >= TC2_MAX_CPUS_PER_CLUSTER);
+
+ local_irq_save(flags);
+ arch_spin_lock(&tc2_pm_lock);
+
+ if (tc2_cluster_unused(cluster)) {
+ ve_spc_powerdown(cluster, false);
+ ve_spc_global_wakeup_irq(false);
+ }
+
+ if (!tc2_pm_use_count[cpu][cluster])
+ tc2_pm_use_count[cpu][cluster] = 1;
+
+ ve_spc_cpu_wakeup_irq(cluster, cpu, false);
+ ve_spc_set_resume_addr(cluster, cpu, 0);
+
+ arch_spin_unlock(&tc2_pm_lock);
+ local_irq_restore(flags);
+}
+
+static const struct mcpm_platform_ops tc2_pm_power_ops = {
+ .power_up = tc2_pm_power_up,
+ .power_down = tc2_pm_power_down,
+ .suspend = tc2_pm_suspend,
+ .powered_up = tc2_pm_powered_up,
+};
+
+static bool __init tc2_pm_usage_count_init(void)
+{
+ unsigned int mpidr, cpu, cluster;
+
+ mpidr = read_cpuid_mpidr();
+ cpu = MPIDR_AFFINITY_LEVEL(mpidr, 0);
+ cluster = MPIDR_AFFINITY_LEVEL(mpidr, 1);
+
+ pr_debug("%s: cpu %u cluster %u\n", __func__, cpu, cluster);
+ if (cluster >= TC2_CLUSTERS || cpu >= tc2_nr_cpus[cluster]) {
+ pr_err("%s: boot CPU is out of bound!\n", __func__);
+ return false;
+ }
+ tc2_pm_use_count[cpu][cluster] = 1;
+ return true;
+}
+
+/*
+ * Enable cluster-level coherency, in preparation for turning on the MMU.
+ */
+static void __naked tc2_pm_power_up_setup(unsigned int affinity_level)
+{
+ asm volatile (" \n"
+" cmp r0, #1 \n"
+" bxne lr \n"
+" b cci_enable_port_for_self ");
+}
+
+static int __init tc2_pm_init(void)
+{
+ int ret;
+ void __iomem *scc;
+ u32 a15_cluster_id, a7_cluster_id, sys_info;
+ struct device_node *np;
+
+ /*
+ * The power management-related features are hidden behind
+ * SCC registers. We need to extract runtime information like
+ * cluster ids and number of CPUs really available in clusters.
+ */
+ np = of_find_compatible_node(NULL, NULL,
+ "arm,vexpress-scc,v2p-ca15_a7");
+ scc = of_iomap(np, 0);
+ if (!scc)
+ return -ENODEV;
+
+ a15_cluster_id = readl_relaxed(scc + A15_CONF) & 0xf;
+ a7_cluster_id = readl_relaxed(scc + A7_CONF) & 0xf;
+ if (a15_cluster_id >= TC2_CLUSTERS || a7_cluster_id >= TC2_CLUSTERS)
+ return -EINVAL;
+
+ sys_info = readl_relaxed(scc + SYS_INFO);
+ tc2_nr_cpus[a15_cluster_id] = (sys_info >> 16) & 0xf;
+ tc2_nr_cpus[a7_cluster_id] = (sys_info >> 20) & 0xf;
+
+ /*
+ * A subset of the SCC registers is also used to communicate
+ * with the SPC (power controller). We need to be able to
+ * drive it very early in the boot process to power up
+ * processors, so we initialize the SPC driver here.
+ */
+ ret = ve_spc_init(scc + SPC_BASE, a15_cluster_id);
+ if (ret)
+ return ret;
+
+ if (!cci_probed())
+ return -ENODEV;
+
+ if (!tc2_pm_usage_count_init())
+ return -EINVAL;
+
+ ret = mcpm_platform_register(&tc2_pm_power_ops);
+ if (!ret) {
+ mcpm_sync_init(tc2_pm_power_up_setup);
+ pr_info("TC2 power management initialized\n");
+ }
+ return ret;
+}
+
+early_initcall(tc2_pm_init);
diff --git a/arch/arm/plat-omap/Kconfig b/arch/arm/plat-omap/Kconfig
index f82bae2..436ea97 100644
--- a/arch/arm/plat-omap/Kconfig
+++ b/arch/arm/plat-omap/Kconfig
@@ -106,7 +106,7 @@
This timer saves power compared to the OMAP_MPU_TIMER, and has
support for no tick during idle. The 32KHz timer provides less
intra-tick resolution than OMAP_MPU_TIMER. The 32KHz timer is
- currently only available for OMAP16XX, 24XX, 34XX and OMAP4/5.
+ currently only available for OMAP16XX, 24XX, 34XX, OMAP4/5 and DRA7XX.
On OMAP2PLUS this value is only used for CONFIG_HZ and
CLOCK_TICK_RATE compile time calculation.
diff --git a/arch/ia64/Kconfig b/arch/ia64/Kconfig
index 5666422..a86a56d 100644
--- a/arch/ia64/Kconfig
+++ b/arch/ia64/Kconfig
@@ -9,7 +9,6 @@
select PCI if (!IA64_HP_SIM)
select ACPI if (!IA64_HP_SIM)
select PM if (!IA64_HP_SIM)
- select ARCH_SUPPORTS_MSI
select HAVE_UNSTABLE_SCHED_CLOCK
select HAVE_IDE
select HAVE_OPROFILE
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index dccd7ce..71f15e7 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -727,7 +727,6 @@
select SYS_HAS_CPU_CAVIUM_OCTEON
select SWAP_IO_SPACE
select HW_HAS_PCI
- select ARCH_SUPPORTS_MSI
select ZONE_DMA32
select USB_ARCH_HAS_OHCI
select USB_ARCH_HAS_EHCI
@@ -763,7 +762,6 @@
select CEVT_R4K
select CSRC_R4K
select IRQ_CPU
- select ARCH_SUPPORTS_MSI
select ZONE_DMA32 if 64BIT
select SYNC_R4K
select SYS_HAS_EARLY_PRINTK
diff --git a/arch/mips/include/asm/pci.h b/arch/mips/include/asm/pci.h
index fa8e0aa..f194c08 100644
--- a/arch/mips/include/asm/pci.h
+++ b/arch/mips/include/asm/pci.h
@@ -136,11 +136,6 @@
return channel ? 15 : 14;
}
-#ifdef CONFIG_CPU_CAVIUM_OCTEON
-/* MSI arch hook for OCTEON */
-#define arch_setup_msi_irqs arch_setup_msi_irqs
-#endif
-
extern char * (*pcibios_plat_setup)(char *str);
#ifdef CONFIG_OF
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index a4e3a93..6b7530f 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -747,7 +747,6 @@
default y if !40x && !CPM2 && !8xx && !PPC_83xx \
&& !PPC_85xx && !PPC_86xx && !GAMECUBE_COMMON
default PCI_QSPAN if !4xx && !CPM2 && 8xx
- select ARCH_SUPPORTS_MSI
select GENERIC_PCI_IOMAP
help
Find out whether your system includes a PCI bus. PCI is the name of
diff --git a/arch/powerpc/include/asm/pci.h b/arch/powerpc/include/asm/pci.h
index 6653f27..95145a1 100644
--- a/arch/powerpc/include/asm/pci.h
+++ b/arch/powerpc/include/asm/pci.h
@@ -113,11 +113,6 @@
/* Decide whether to display the domain number in /proc */
extern int pci_proc_domain(struct pci_bus *bus);
-/* MSI arch hooks */
-#define arch_setup_msi_irqs arch_setup_msi_irqs
-#define arch_teardown_msi_irqs arch_teardown_msi_irqs
-#define arch_msi_check_device arch_msi_check_device
-
struct vm_area_struct;
/* Map a range of PCI memory or I/O space for a device into user space */
int pci_mmap_page_range(struct pci_dev *pdev, struct vm_area_struct *vma,
diff --git a/arch/s390/Kconfig b/arch/s390/Kconfig
index 8b7892bf6..c696ad7d 100644
--- a/arch/s390/Kconfig
+++ b/arch/s390/Kconfig
@@ -431,7 +431,6 @@
bool "PCI support"
default n
depends on 64BIT
- select ARCH_SUPPORTS_MSI
select PCI_MSI
help
Enable PCI support.
diff --git a/arch/s390/include/asm/pci.h b/arch/s390/include/asm/pci.h
index c290f13..1cc185d 100644
--- a/arch/s390/include/asm/pci.h
+++ b/arch/s390/include/asm/pci.h
@@ -22,10 +22,6 @@
int pci_domain_nr(struct pci_bus *);
int pci_proc_domain(struct pci_bus *);
-/* MSI arch hooks */
-#define arch_setup_msi_irqs arch_setup_msi_irqs
-#define arch_teardown_msi_irqs arch_teardown_msi_irqs
-
#define ZPCI_BUS_NR 0 /* default bus number */
#define ZPCI_DEVFN 0 /* default device number */
diff --git a/arch/sparc/Kconfig b/arch/sparc/Kconfig
index a00cbd3..1570ad2 100644
--- a/arch/sparc/Kconfig
+++ b/arch/sparc/Kconfig
@@ -52,7 +52,6 @@
config SPARC64
def_bool 64BIT
- select ARCH_SUPPORTS_MSI
select HAVE_FUNCTION_TRACER
select HAVE_FUNCTION_GRAPH_TRACER
select HAVE_FUNCTION_GRAPH_FP_TEST
diff --git a/arch/tile/Kconfig b/arch/tile/Kconfig
index 6e1ed55..932fa14 100644
--- a/arch/tile/Kconfig
+++ b/arch/tile/Kconfig
@@ -395,7 +395,6 @@
select PCI_DOMAINS
select GENERIC_PCI_IOMAP
select TILE_GXIO_TRIO if TILEGX
- select ARCH_SUPPORTS_MSI if TILEGX
select PCI_MSI if TILEGX
---help---
Enable PCI root complex support, so PCIe endpoint devices can
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index 5c0ed72..30c40f0 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -2032,7 +2032,6 @@
config PCI
bool "PCI support"
default y
- select ARCH_SUPPORTS_MSI if (X86_LOCAL_APIC && X86_IO_APIC)
---help---
Find out whether you have a PCI motherboard. PCI is the name of a
bus system, i.e. the way the CPU talks to the other stuff inside
diff --git a/arch/x86/include/asm/pci.h b/arch/x86/include/asm/pci.h
index d9e9e6c..7d74432 100644
--- a/arch/x86/include/asm/pci.h
+++ b/arch/x86/include/asm/pci.h
@@ -100,29 +100,6 @@
extern void pci_iommu_alloc(void);
#ifdef CONFIG_PCI_MSI
-/* MSI arch specific hooks */
-static inline int x86_setup_msi_irqs(struct pci_dev *dev, int nvec, int type)
-{
- return x86_msi.setup_msi_irqs(dev, nvec, type);
-}
-
-static inline void x86_teardown_msi_irqs(struct pci_dev *dev)
-{
- x86_msi.teardown_msi_irqs(dev);
-}
-
-static inline void x86_teardown_msi_irq(unsigned int irq)
-{
- x86_msi.teardown_msi_irq(irq);
-}
-static inline void x86_restore_msi_irqs(struct pci_dev *dev, int irq)
-{
- x86_msi.restore_msi_irqs(dev, irq);
-}
-#define arch_setup_msi_irqs x86_setup_msi_irqs
-#define arch_teardown_msi_irqs x86_teardown_msi_irqs
-#define arch_teardown_msi_irq x86_teardown_msi_irq
-#define arch_restore_msi_irqs x86_restore_msi_irqs
/* implemented in arch/x86/kernel/apic/io_apic. */
struct msi_desc;
int native_setup_msi_irqs(struct pci_dev *dev, int nvec, int type);
@@ -130,16 +107,9 @@
void native_restore_msi_irqs(struct pci_dev *dev, int irq);
int setup_msi_irq(struct pci_dev *dev, struct msi_desc *msidesc,
unsigned int irq_base, unsigned int irq_offset);
-/* default to the implementation in drivers/lib/msi.c */
-#define HAVE_DEFAULT_MSI_TEARDOWN_IRQS
-#define HAVE_DEFAULT_MSI_RESTORE_IRQS
-void default_teardown_msi_irqs(struct pci_dev *dev);
-void default_restore_msi_irqs(struct pci_dev *dev, int irq);
#else
#define native_setup_msi_irqs NULL
#define native_teardown_msi_irq NULL
-#define default_teardown_msi_irqs NULL
-#define default_restore_msi_irqs NULL
#endif
#define PCI_DMA_BUS_IS_PHYS (dma_ops->is_phys)
diff --git a/arch/x86/kernel/x86_init.c b/arch/x86/kernel/x86_init.c
index 5f24c71..8ce0072 100644
--- a/arch/x86/kernel/x86_init.c
+++ b/arch/x86/kernel/x86_init.c
@@ -107,6 +107,8 @@
};
EXPORT_SYMBOL_GPL(x86_platform);
+
+#if defined(CONFIG_PCI_MSI)
struct x86_msi_ops x86_msi = {
.setup_msi_irqs = native_setup_msi_irqs,
.compose_msi_msg = native_compose_msi_msg,
@@ -116,6 +118,28 @@
.setup_hpet_msi = default_setup_hpet_msi,
};
+/* MSI arch specific hooks */
+int arch_setup_msi_irqs(struct pci_dev *dev, int nvec, int type)
+{
+ return x86_msi.setup_msi_irqs(dev, nvec, type);
+}
+
+void arch_teardown_msi_irqs(struct pci_dev *dev)
+{
+ x86_msi.teardown_msi_irqs(dev);
+}
+
+void arch_teardown_msi_irq(unsigned int irq)
+{
+ x86_msi.teardown_msi_irq(irq);
+}
+
+void arch_restore_msi_irqs(struct pci_dev *dev, int irq)
+{
+ x86_msi.restore_msi_irqs(dev, irq);
+}
+#endif
+
struct x86_io_apic_ops x86_io_apic_ops = {
.init = native_io_apic_init_mappings,
.read = native_io_apic_read,
diff --git a/drivers/bus/Kconfig b/drivers/bus/Kconfig
index 1f70e84..552373c 100644
--- a/drivers/bus/Kconfig
+++ b/drivers/bus/Kconfig
@@ -8,10 +8,9 @@
bool "Freescale EIM DRIVER"
depends on ARCH_MXC
help
- Driver for i.MX6 WEIM controller.
+ Driver for i.MX WEIM controller.
The WEIM(Wireless External Interface Module) works like a bus.
You can attach many different devices on it, such as NOR, onenand.
- But now, we only support the Parallel NOR.
config MVEBU_MBUS
bool
diff --git a/drivers/bus/imx-weim.c b/drivers/bus/imx-weim.c
index 349f14e..3ef58c8 100644
--- a/drivers/bus/imx-weim.c
+++ b/drivers/bus/imx-weim.c
@@ -12,52 +12,83 @@
#include <linux/io.h>
#include <linux/of_device.h>
-struct imx_weim {
- void __iomem *base;
- struct clk *clk;
+struct imx_weim_devtype {
+ unsigned int cs_count;
+ unsigned int cs_regs_count;
+ unsigned int cs_stride;
+};
+
+static const struct imx_weim_devtype imx1_weim_devtype = {
+ .cs_count = 6,
+ .cs_regs_count = 2,
+ .cs_stride = 0x08,
+};
+
+static const struct imx_weim_devtype imx27_weim_devtype = {
+ .cs_count = 6,
+ .cs_regs_count = 3,
+ .cs_stride = 0x10,
+};
+
+static const struct imx_weim_devtype imx50_weim_devtype = {
+ .cs_count = 4,
+ .cs_regs_count = 6,
+ .cs_stride = 0x18,
+};
+
+static const struct imx_weim_devtype imx51_weim_devtype = {
+ .cs_count = 6,
+ .cs_regs_count = 6,
+ .cs_stride = 0x18,
};
static const struct of_device_id weim_id_table[] = {
- { .compatible = "fsl,imx6q-weim", },
- {}
+ /* i.MX1/21 */
+ { .compatible = "fsl,imx1-weim", .data = &imx1_weim_devtype, },
+ /* i.MX25/27/31/35 */
+ { .compatible = "fsl,imx27-weim", .data = &imx27_weim_devtype, },
+ /* i.MX50/53/6Q */
+ { .compatible = "fsl,imx50-weim", .data = &imx50_weim_devtype, },
+ { .compatible = "fsl,imx6q-weim", .data = &imx50_weim_devtype, },
+ /* i.MX51 */
+ { .compatible = "fsl,imx51-weim", .data = &imx51_weim_devtype, },
+ { }
};
MODULE_DEVICE_TABLE(of, weim_id_table);
-#define CS_TIMING_LEN 6
-#define CS_REG_RANGE 0x18
-
/* Parse and set the timing for this device. */
-static int
-weim_timing_setup(struct platform_device *pdev, struct device_node *np)
+static int __init weim_timing_setup(struct device_node *np, void __iomem *base,
+ const struct imx_weim_devtype *devtype)
{
- struct imx_weim *weim = platform_get_drvdata(pdev);
- u32 value[CS_TIMING_LEN];
- u32 cs_idx;
- int ret;
- int i;
+ u32 cs_idx, value[devtype->cs_regs_count];
+ int i, ret;
/* get the CS index from this child node's "reg" property. */
ret = of_property_read_u32(np, "reg", &cs_idx);
if (ret)
return ret;
- /* The weim has four chip selects. */
- if (cs_idx > 3)
+ if (cs_idx >= devtype->cs_count)
return -EINVAL;
ret = of_property_read_u32_array(np, "fsl,weim-cs-timing",
- value, CS_TIMING_LEN);
+ value, devtype->cs_regs_count);
if (ret)
return ret;
/* set the timing for WEIM */
- for (i = 0; i < CS_TIMING_LEN; i++)
- writel(value[i], weim->base + cs_idx * CS_REG_RANGE + i * 4);
+ for (i = 0; i < devtype->cs_regs_count; i++)
+ writel(value[i], base + cs_idx * devtype->cs_stride + i * 4);
+
return 0;
}
-static int weim_parse_dt(struct platform_device *pdev)
+static int __init weim_parse_dt(struct platform_device *pdev,
+ void __iomem *base)
{
+ const struct of_device_id *of_id = of_match_device(weim_id_table,
+ &pdev->dev);
+ const struct imx_weim_devtype *devtype = of_id->data;
struct device_node *child;
int ret;
@@ -65,7 +96,7 @@
if (!child->name)
continue;
- ret = weim_timing_setup(pdev, child);
+ ret = weim_timing_setup(child, base, devtype);
if (ret) {
dev_err(&pdev->dev, "%s set timing failed.\n",
child->full_name);
@@ -80,59 +111,47 @@
return ret;
}
-static int weim_probe(struct platform_device *pdev)
+static int __init weim_probe(struct platform_device *pdev)
{
- struct imx_weim *weim;
struct resource *res;
- int ret = -EINVAL;
-
- weim = devm_kzalloc(&pdev->dev, sizeof(*weim), GFP_KERNEL);
- if (!weim) {
- ret = -ENOMEM;
- goto weim_err;
- }
- platform_set_drvdata(pdev, weim);
+ struct clk *clk;
+ void __iomem *base;
+ int ret;
/* get the resource */
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- weim->base = devm_ioremap_resource(&pdev->dev, res);
- if (IS_ERR(weim->base)) {
- ret = PTR_ERR(weim->base);
- goto weim_err;
- }
+ base = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(base))
+ return PTR_ERR(base);
/* get the clock */
- weim->clk = devm_clk_get(&pdev->dev, NULL);
- if (IS_ERR(weim->clk))
- goto weim_err;
+ clk = devm_clk_get(&pdev->dev, NULL);
+ if (IS_ERR(clk))
+ return PTR_ERR(clk);
- ret = clk_prepare_enable(weim->clk);
+ ret = clk_prepare_enable(clk);
if (ret)
- goto weim_err;
+ return ret;
/* parse the device node */
- ret = weim_parse_dt(pdev);
- if (ret) {
- clk_disable_unprepare(weim->clk);
- goto weim_err;
- }
+ ret = weim_parse_dt(pdev, base);
+ if (ret)
+ clk_disable_unprepare(clk);
+ else
+ dev_info(&pdev->dev, "Driver registered.\n");
- dev_info(&pdev->dev, "WEIM driver registered.\n");
- return 0;
-
-weim_err:
return ret;
}
static struct platform_driver weim_driver = {
.driver = {
- .name = "imx-weim",
- .of_match_table = weim_id_table,
+ .name = "imx-weim",
+ .owner = THIS_MODULE,
+ .of_match_table = weim_id_table,
},
- .probe = weim_probe,
};
+module_platform_driver_probe(weim_driver, weim_probe);
-module_platform_driver(weim_driver);
MODULE_AUTHOR("Freescale Semiconductor Inc.");
MODULE_DESCRIPTION("i.MX EIM Controller Driver");
MODULE_LICENSE("GPL");
diff --git a/drivers/bus/mvebu-mbus.c b/drivers/bus/mvebu-mbus.c
index 33c6947..19ab6ff 100644
--- a/drivers/bus/mvebu-mbus.c
+++ b/drivers/bus/mvebu-mbus.c
@@ -35,13 +35,9 @@
*
* - Provides an API for platform code or device drivers to
* dynamically add or remove address decoding windows for the CPU ->
- * device accesses. This API is mvebu_mbus_add_window(),
- * mvebu_mbus_add_window_remap_flags() and
- * mvebu_mbus_del_window(). Since the (target, attribute) values
- * differ from one SoC family to another, the API uses a 'const char
- * *' string to identify devices, and this driver is responsible for
- * knowing the mapping between the name of a device and its
- * corresponding (target, attribute) in the current SoC family.
+ * device accesses. This API is mvebu_mbus_add_window_by_id(),
+ * mvebu_mbus_add_window_remap_by_id() and
+ * mvebu_mbus_del_window().
*
* - Provides a debugfs interface in /sys/kernel/debug/mvebu-mbus/ to
* see the list of CPU -> SDRAM windows and their configuration
@@ -97,33 +93,6 @@
#define DOVE_DDR_BASE_CS_OFF(n) ((n) << 4)
-struct mvebu_mbus_mapping {
- const char *name;
- u8 target;
- u8 attr;
- u8 attrmask;
-};
-
-/*
- * Masks used for the 'attrmask' field of mvebu_mbus_mapping. They
- * allow to get the real attribute value, discarding the special bits
- * used to select a PCI MEM region or a PCI WA region. This allows the
- * debugfs code to reverse-match the name of a device from its
- * target/attr values.
- *
- * For all devices except PCI, all bits of 'attr' must be
- * considered. For most SoCs, only bit 3 should be ignored (it allows
- * to select between PCI MEM and PCI I/O). On Orion5x however, there
- * is the special bit 5 to select a PCI WA region.
- */
-#define MAPDEF_NOMASK 0xff
-#define MAPDEF_PCIMASK 0xf7
-#define MAPDEF_ORIONPCIMASK 0xd7
-
-/* Macro used to define one mvebu_mbus_mapping entry */
-#define MAPDEF(__n, __t, __a, __m) \
- { .name = __n, .target = __t, .attr = __a, .attrmask = __m }
-
struct mvebu_mbus_state;
struct mvebu_mbus_soc_data {
@@ -133,7 +102,6 @@
void (*setup_cpu_target)(struct mvebu_mbus_state *s);
int (*show_cpu_target)(struct mvebu_mbus_state *s,
struct seq_file *seq, void *v);
- const struct mvebu_mbus_mapping *map;
};
struct mvebu_mbus_state {
@@ -142,6 +110,8 @@
struct dentry *debugfs_root;
struct dentry *debugfs_sdram;
struct dentry *debugfs_devs;
+ struct resource pcie_mem_aperture;
+ struct resource pcie_io_aperture;
const struct mvebu_mbus_soc_data *soc;
int hw_io_coherency;
};
@@ -428,8 +398,7 @@
u64 wbase, wremap;
u32 wsize;
u8 wtarget, wattr;
- int enabled, i;
- const char *name;
+ int enabled;
mvebu_mbus_read_window(mbus, win,
&enabled, &wbase, &wsize,
@@ -440,18 +409,9 @@
continue;
}
-
- for (i = 0; mbus->soc->map[i].name; i++)
- if (mbus->soc->map[i].target == wtarget &&
- mbus->soc->map[i].attr ==
- (wattr & mbus->soc->map[i].attrmask))
- break;
-
- name = mbus->soc->map[i].name ?: "unknown";
-
- seq_printf(seq, "[%02d] %016llx - %016llx : %s",
+ seq_printf(seq, "[%02d] %016llx - %016llx : %04x:%04x",
win, (unsigned long long)wbase,
- (unsigned long long)(wbase + wsize), name);
+ (unsigned long long)(wbase + wsize), wtarget, wattr);
if (win < mbus->soc->num_remappable_wins) {
seq_printf(seq, " (remap %016llx)\n",
@@ -576,62 +536,12 @@
mvebu_mbus_dram_info.num_cs = cs;
}
-static const struct mvebu_mbus_mapping armada_370_map[] = {
- MAPDEF("bootrom", 1, 0xe0, MAPDEF_NOMASK),
- MAPDEF("devbus-boot", 1, 0x2f, MAPDEF_NOMASK),
- MAPDEF("devbus-cs0", 1, 0x3e, MAPDEF_NOMASK),
- MAPDEF("devbus-cs1", 1, 0x3d, MAPDEF_NOMASK),
- MAPDEF("devbus-cs2", 1, 0x3b, MAPDEF_NOMASK),
- MAPDEF("devbus-cs3", 1, 0x37, MAPDEF_NOMASK),
- MAPDEF("pcie0.0", 4, 0xe0, MAPDEF_PCIMASK),
- MAPDEF("pcie1.0", 8, 0xe0, MAPDEF_PCIMASK),
- {},
-};
-
-static const struct mvebu_mbus_soc_data armada_370_mbus_data = {
+static const struct mvebu_mbus_soc_data armada_370_xp_mbus_data = {
.num_wins = 20,
.num_remappable_wins = 8,
.win_cfg_offset = armada_370_xp_mbus_win_offset,
.setup_cpu_target = mvebu_mbus_default_setup_cpu_target,
.show_cpu_target = mvebu_sdram_debug_show_orion,
- .map = armada_370_map,
-};
-
-static const struct mvebu_mbus_mapping armada_xp_map[] = {
- MAPDEF("bootrom", 1, 0x1d, MAPDEF_NOMASK),
- MAPDEF("devbus-boot", 1, 0x2f, MAPDEF_NOMASK),
- MAPDEF("devbus-cs0", 1, 0x3e, MAPDEF_NOMASK),
- MAPDEF("devbus-cs1", 1, 0x3d, MAPDEF_NOMASK),
- MAPDEF("devbus-cs2", 1, 0x3b, MAPDEF_NOMASK),
- MAPDEF("devbus-cs3", 1, 0x37, MAPDEF_NOMASK),
- MAPDEF("pcie0.0", 4, 0xe0, MAPDEF_PCIMASK),
- MAPDEF("pcie0.1", 4, 0xd0, MAPDEF_PCIMASK),
- MAPDEF("pcie0.2", 4, 0xb0, MAPDEF_PCIMASK),
- MAPDEF("pcie0.3", 4, 0x70, MAPDEF_PCIMASK),
- MAPDEF("pcie1.0", 8, 0xe0, MAPDEF_PCIMASK),
- MAPDEF("pcie1.1", 8, 0xd0, MAPDEF_PCIMASK),
- MAPDEF("pcie1.2", 8, 0xb0, MAPDEF_PCIMASK),
- MAPDEF("pcie1.3", 8, 0x70, MAPDEF_PCIMASK),
- MAPDEF("pcie2.0", 4, 0xf0, MAPDEF_PCIMASK),
- MAPDEF("pcie3.0", 8, 0xf0, MAPDEF_PCIMASK),
- {},
-};
-
-static const struct mvebu_mbus_soc_data armada_xp_mbus_data = {
- .num_wins = 20,
- .num_remappable_wins = 8,
- .win_cfg_offset = armada_370_xp_mbus_win_offset,
- .setup_cpu_target = mvebu_mbus_default_setup_cpu_target,
- .show_cpu_target = mvebu_sdram_debug_show_orion,
- .map = armada_xp_map,
-};
-
-static const struct mvebu_mbus_mapping kirkwood_map[] = {
- MAPDEF("pcie0.0", 4, 0xe0, MAPDEF_PCIMASK),
- MAPDEF("pcie1.0", 4, 0xd0, MAPDEF_PCIMASK),
- MAPDEF("sram", 3, 0x01, MAPDEF_NOMASK),
- MAPDEF("nand", 1, 0x2f, MAPDEF_NOMASK),
- {},
};
static const struct mvebu_mbus_soc_data kirkwood_mbus_data = {
@@ -640,16 +550,6 @@
.win_cfg_offset = orion_mbus_win_offset,
.setup_cpu_target = mvebu_mbus_default_setup_cpu_target,
.show_cpu_target = mvebu_sdram_debug_show_orion,
- .map = kirkwood_map,
-};
-
-static const struct mvebu_mbus_mapping dove_map[] = {
- MAPDEF("pcie0.0", 0x4, 0xe0, MAPDEF_PCIMASK),
- MAPDEF("pcie1.0", 0x8, 0xe0, MAPDEF_PCIMASK),
- MAPDEF("cesa", 0x3, 0x01, MAPDEF_NOMASK),
- MAPDEF("bootrom", 0x1, 0xfd, MAPDEF_NOMASK),
- MAPDEF("scratchpad", 0xd, 0x0, MAPDEF_NOMASK),
- {},
};
static const struct mvebu_mbus_soc_data dove_mbus_data = {
@@ -658,18 +558,6 @@
.win_cfg_offset = orion_mbus_win_offset,
.setup_cpu_target = mvebu_mbus_dove_setup_cpu_target,
.show_cpu_target = mvebu_sdram_debug_show_dove,
- .map = dove_map,
-};
-
-static const struct mvebu_mbus_mapping orion5x_map[] = {
- MAPDEF("pcie0.0", 4, 0x51, MAPDEF_ORIONPCIMASK),
- MAPDEF("pci0.0", 3, 0x51, MAPDEF_ORIONPCIMASK),
- MAPDEF("devbus-boot", 1, 0x0f, MAPDEF_NOMASK),
- MAPDEF("devbus-cs0", 1, 0x1e, MAPDEF_NOMASK),
- MAPDEF("devbus-cs1", 1, 0x1d, MAPDEF_NOMASK),
- MAPDEF("devbus-cs2", 1, 0x1b, MAPDEF_NOMASK),
- MAPDEF("sram", 0, 0x00, MAPDEF_NOMASK),
- {},
};
/*
@@ -682,7 +570,6 @@
.win_cfg_offset = orion_mbus_win_offset,
.setup_cpu_target = mvebu_mbus_default_setup_cpu_target,
.show_cpu_target = mvebu_sdram_debug_show_orion,
- .map = orion5x_map,
};
static const struct mvebu_mbus_soc_data orion5x_2win_mbus_data = {
@@ -691,21 +578,6 @@
.win_cfg_offset = orion_mbus_win_offset,
.setup_cpu_target = mvebu_mbus_default_setup_cpu_target,
.show_cpu_target = mvebu_sdram_debug_show_orion,
- .map = orion5x_map,
-};
-
-static const struct mvebu_mbus_mapping mv78xx0_map[] = {
- MAPDEF("pcie0.0", 4, 0xe0, MAPDEF_PCIMASK),
- MAPDEF("pcie0.1", 4, 0xd0, MAPDEF_PCIMASK),
- MAPDEF("pcie0.2", 4, 0xb0, MAPDEF_PCIMASK),
- MAPDEF("pcie0.3", 4, 0x70, MAPDEF_PCIMASK),
- MAPDEF("pcie1.0", 8, 0xe0, MAPDEF_PCIMASK),
- MAPDEF("pcie1.1", 8, 0xd0, MAPDEF_PCIMASK),
- MAPDEF("pcie1.2", 8, 0xb0, MAPDEF_PCIMASK),
- MAPDEF("pcie1.3", 8, 0x70, MAPDEF_PCIMASK),
- MAPDEF("pcie2.0", 4, 0xf0, MAPDEF_PCIMASK),
- MAPDEF("pcie3.0", 8, 0xf0, MAPDEF_PCIMASK),
- {},
};
static const struct mvebu_mbus_soc_data mv78xx0_mbus_data = {
@@ -714,7 +586,6 @@
.win_cfg_offset = mv78xx0_mbus_win_offset,
.setup_cpu_target = mvebu_mbus_default_setup_cpu_target,
.show_cpu_target = mvebu_sdram_debug_show_orion,
- .map = mv78xx0_map,
};
/*
@@ -725,9 +596,9 @@
*/
static const struct of_device_id of_mvebu_mbus_ids[] = {
{ .compatible = "marvell,armada370-mbus",
- .data = &armada_370_mbus_data, },
+ .data = &armada_370_xp_mbus_data, },
{ .compatible = "marvell,armadaxp-mbus",
- .data = &armada_xp_mbus_data, },
+ .data = &armada_370_xp_mbus_data, },
{ .compatible = "marvell,kirkwood-mbus",
.data = &kirkwood_mbus_data, },
{ .compatible = "marvell,dove-mbus",
@@ -748,48 +619,27 @@
/*
* Public API of the driver
*/
-int mvebu_mbus_add_window_remap_flags(const char *devname, phys_addr_t base,
- size_t size, phys_addr_t remap,
- unsigned int flags)
+int mvebu_mbus_add_window_remap_by_id(unsigned int target,
+ unsigned int attribute,
+ phys_addr_t base, size_t size,
+ phys_addr_t remap)
{
struct mvebu_mbus_state *s = &mbus_state;
- u8 target, attr;
- int i;
- if (!s->soc->map)
- return -ENODEV;
-
- for (i = 0; s->soc->map[i].name; i++)
- if (!strcmp(s->soc->map[i].name, devname))
- break;
-
- if (!s->soc->map[i].name) {
- pr_err("unknown device '%s'\n", devname);
- return -ENODEV;
- }
-
- target = s->soc->map[i].target;
- attr = s->soc->map[i].attr;
-
- if (flags == MVEBU_MBUS_PCI_MEM)
- attr |= 0x8;
- else if (flags == MVEBU_MBUS_PCI_WA)
- attr |= 0x28;
-
- if (!mvebu_mbus_window_conflicts(s, base, size, target, attr)) {
- pr_err("cannot add window '%s', conflicts with another window\n",
- devname);
+ if (!mvebu_mbus_window_conflicts(s, base, size, target, attribute)) {
+ pr_err("cannot add window '%x:%x', conflicts with another window\n",
+ target, attribute);
return -EINVAL;
}
- return mvebu_mbus_alloc_window(s, base, size, remap, target, attr);
-
+ return mvebu_mbus_alloc_window(s, base, size, remap, target, attribute);
}
-int mvebu_mbus_add_window(const char *devname, phys_addr_t base, size_t size)
+int mvebu_mbus_add_window_by_id(unsigned int target, unsigned int attribute,
+ phys_addr_t base, size_t size)
{
- return mvebu_mbus_add_window_remap_flags(devname, base, size,
- MVEBU_MBUS_NO_REMAP, 0);
+ return mvebu_mbus_add_window_remap_by_id(target, attribute, base,
+ size, MVEBU_MBUS_NO_REMAP);
}
int mvebu_mbus_del_window(phys_addr_t base, size_t size)
@@ -804,6 +654,20 @@
return 0;
}
+void mvebu_mbus_get_pcie_mem_aperture(struct resource *res)
+{
+ if (!res)
+ return;
+ *res = mbus_state.pcie_mem_aperture;
+}
+
+void mvebu_mbus_get_pcie_io_aperture(struct resource *res)
+{
+ if (!res)
+ return;
+ *res = mbus_state.pcie_io_aperture;
+}
+
static __init int mvebu_mbus_debugfs_init(void)
{
struct mvebu_mbus_state *s = &mbus_state;
@@ -830,26 +694,14 @@
}
fs_initcall(mvebu_mbus_debugfs_init);
-int __init mvebu_mbus_init(const char *soc, phys_addr_t mbuswins_phys_base,
- size_t mbuswins_size,
- phys_addr_t sdramwins_phys_base,
- size_t sdramwins_size)
+static int __init mvebu_mbus_common_init(struct mvebu_mbus_state *mbus,
+ phys_addr_t mbuswins_phys_base,
+ size_t mbuswins_size,
+ phys_addr_t sdramwins_phys_base,
+ size_t sdramwins_size)
{
- struct mvebu_mbus_state *mbus = &mbus_state;
- const struct of_device_id *of_id;
int win;
- for (of_id = of_mvebu_mbus_ids; of_id->compatible; of_id++)
- if (!strcmp(of_id->compatible, soc))
- break;
-
- if (!of_id->compatible) {
- pr_err("could not find a matching SoC family\n");
- return -ENODEV;
- }
-
- mbus->soc = of_id->data;
-
mbus->mbuswins_base = ioremap(mbuswins_phys_base, mbuswins_size);
if (!mbus->mbuswins_base)
return -ENOMEM;
@@ -870,3 +722,218 @@
return 0;
}
+
+int __init mvebu_mbus_init(const char *soc, phys_addr_t mbuswins_phys_base,
+ size_t mbuswins_size,
+ phys_addr_t sdramwins_phys_base,
+ size_t sdramwins_size)
+{
+ const struct of_device_id *of_id;
+
+ for (of_id = of_mvebu_mbus_ids; of_id->compatible; of_id++)
+ if (!strcmp(of_id->compatible, soc))
+ break;
+
+ if (!of_id->compatible) {
+ pr_err("could not find a matching SoC family\n");
+ return -ENODEV;
+ }
+
+ mbus_state.soc = of_id->data;
+
+ return mvebu_mbus_common_init(&mbus_state,
+ mbuswins_phys_base,
+ mbuswins_size,
+ sdramwins_phys_base,
+ sdramwins_size);
+}
+
+#ifdef CONFIG_OF
+/*
+ * The window IDs in the ranges DT property have the following format:
+ * - bits 28 to 31: MBus custom field
+ * - bits 24 to 27: window target ID
+ * - bits 16 to 23: window attribute ID
+ * - bits 0 to 15: unused
+ */
+#define CUSTOM(id) (((id) & 0xF0000000) >> 24)
+#define TARGET(id) (((id) & 0x0F000000) >> 24)
+#define ATTR(id) (((id) & 0x00FF0000) >> 16)
+
+static int __init mbus_dt_setup_win(struct mvebu_mbus_state *mbus,
+ u32 base, u32 size,
+ u8 target, u8 attr)
+{
+ if (!mvebu_mbus_window_conflicts(mbus, base, size, target, attr)) {
+ pr_err("cannot add window '%04x:%04x', conflicts with another window\n",
+ target, attr);
+ return -EBUSY;
+ }
+
+ if (mvebu_mbus_alloc_window(mbus, base, size, MVEBU_MBUS_NO_REMAP,
+ target, attr)) {
+ pr_err("cannot add window '%04x:%04x', too many windows\n",
+ target, attr);
+ return -ENOMEM;
+ }
+ return 0;
+}
+
+static int __init
+mbus_parse_ranges(struct device_node *node,
+ int *addr_cells, int *c_addr_cells, int *c_size_cells,
+ int *cell_count, const __be32 **ranges_start,
+ const __be32 **ranges_end)
+{
+ const __be32 *prop;
+ int ranges_len, tuple_len;
+
+ /* Allow a node with no 'ranges' property */
+ *ranges_start = of_get_property(node, "ranges", &ranges_len);
+ if (*ranges_start == NULL) {
+ *addr_cells = *c_addr_cells = *c_size_cells = *cell_count = 0;
+ *ranges_start = *ranges_end = NULL;
+ return 0;
+ }
+ *ranges_end = *ranges_start + ranges_len / sizeof(__be32);
+
+ *addr_cells = of_n_addr_cells(node);
+
+ prop = of_get_property(node, "#address-cells", NULL);
+ *c_addr_cells = be32_to_cpup(prop);
+
+ prop = of_get_property(node, "#size-cells", NULL);
+ *c_size_cells = be32_to_cpup(prop);
+
+ *cell_count = *addr_cells + *c_addr_cells + *c_size_cells;
+ tuple_len = (*cell_count) * sizeof(__be32);
+
+ if (ranges_len % tuple_len) {
+ pr_warn("malformed ranges entry '%s'\n", node->name);
+ return -EINVAL;
+ }
+ return 0;
+}
+
+static int __init mbus_dt_setup(struct mvebu_mbus_state *mbus,
+ struct device_node *np)
+{
+ int addr_cells, c_addr_cells, c_size_cells;
+ int i, ret, cell_count;
+ const __be32 *r, *ranges_start, *ranges_end;
+
+ ret = mbus_parse_ranges(np, &addr_cells, &c_addr_cells,
+ &c_size_cells, &cell_count,
+ &ranges_start, &ranges_end);
+ if (ret < 0)
+ return ret;
+
+ for (i = 0, r = ranges_start; r < ranges_end; r += cell_count, i++) {
+ u32 windowid, base, size;
+ u8 target, attr;
+
+ /*
+ * An entry with a non-zero custom field do not
+ * correspond to a static window, so skip it.
+ */
+ windowid = of_read_number(r, 1);
+ if (CUSTOM(windowid))
+ continue;
+
+ target = TARGET(windowid);
+ attr = ATTR(windowid);
+
+ base = of_read_number(r + c_addr_cells, addr_cells);
+ size = of_read_number(r + c_addr_cells + addr_cells,
+ c_size_cells);
+ ret = mbus_dt_setup_win(mbus, base, size, target, attr);
+ if (ret < 0)
+ return ret;
+ }
+ return 0;
+}
+
+static void __init mvebu_mbus_get_pcie_resources(struct device_node *np,
+ struct resource *mem,
+ struct resource *io)
+{
+ u32 reg[2];
+ int ret;
+
+ /*
+ * These are optional, so we clear them and they'll
+ * be zero if they are missing from the DT.
+ */
+ memset(mem, 0, sizeof(struct resource));
+ memset(io, 0, sizeof(struct resource));
+
+ ret = of_property_read_u32_array(np, "pcie-mem-aperture", reg, ARRAY_SIZE(reg));
+ if (!ret) {
+ mem->start = reg[0];
+ mem->end = mem->start + reg[1];
+ mem->flags = IORESOURCE_MEM;
+ }
+
+ ret = of_property_read_u32_array(np, "pcie-io-aperture", reg, ARRAY_SIZE(reg));
+ if (!ret) {
+ io->start = reg[0];
+ io->end = io->start + reg[1];
+ io->flags = IORESOURCE_IO;
+ }
+}
+
+int __init mvebu_mbus_dt_init(void)
+{
+ struct resource mbuswins_res, sdramwins_res;
+ struct device_node *np, *controller;
+ const struct of_device_id *of_id;
+ const __be32 *prop;
+ int ret;
+
+ np = of_find_matching_node(NULL, of_mvebu_mbus_ids);
+ if (!np) {
+ pr_err("could not find a matching SoC family\n");
+ return -ENODEV;
+ }
+
+ of_id = of_match_node(of_mvebu_mbus_ids, np);
+ mbus_state.soc = of_id->data;
+
+ prop = of_get_property(np, "controller", NULL);
+ if (!prop) {
+ pr_err("required 'controller' property missing\n");
+ return -EINVAL;
+ }
+
+ controller = of_find_node_by_phandle(be32_to_cpup(prop));
+ if (!controller) {
+ pr_err("could not find an 'mbus-controller' node\n");
+ return -ENODEV;
+ }
+
+ if (of_address_to_resource(controller, 0, &mbuswins_res)) {
+ pr_err("cannot get MBUS register address\n");
+ return -EINVAL;
+ }
+
+ if (of_address_to_resource(controller, 1, &sdramwins_res)) {
+ pr_err("cannot get SDRAM register address\n");
+ return -EINVAL;
+ }
+
+ /* Get optional pcie-{mem,io}-aperture properties */
+ mvebu_mbus_get_pcie_resources(np, &mbus_state.pcie_mem_aperture,
+ &mbus_state.pcie_io_aperture);
+
+ ret = mvebu_mbus_common_init(&mbus_state,
+ mbuswins_res.start,
+ resource_size(&mbuswins_res),
+ sdramwins_res.start,
+ resource_size(&sdramwins_res));
+ if (ret)
+ return ret;
+
+ /* Setup statically declared windows in the DT */
+ return mbus_dt_setup(&mbus_state, np);
+}
+#endif
diff --git a/drivers/clk/tegra/clk-tegra114.c b/drivers/clk/tegra/clk-tegra114.c
index b6015cb..806d803 100644
--- a/drivers/clk/tegra/clk-tegra114.c
+++ b/drivers/clk/tegra/clk-tegra114.c
@@ -290,6 +290,14 @@
/* Tegra CPU clock and reset control regs */
#define CLK_RST_CONTROLLER_CPU_CMPLX_STATUS 0x470
+#ifdef CONFIG_PM_SLEEP
+static struct cpu_clk_suspend_context {
+ u32 clk_csite_src;
+ u32 cclkg_burst;
+ u32 cclkg_divider;
+} tegra114_cpu_clk_sctx;
+#endif
+
static int periph_clk_enb_refcnt[CLK_OUT_ENB_NUM * 32];
static void __iomem *clk_base;
@@ -2142,9 +2150,39 @@
/* flow controller would take care in the power sequence. */
}
+#ifdef CONFIG_PM_SLEEP
+static void tegra114_cpu_clock_suspend(void)
+{
+ /* switch coresite to clk_m, save off original source */
+ tegra114_cpu_clk_sctx.clk_csite_src =
+ readl(clk_base + CLK_SOURCE_CSITE);
+ writel(3 << 30, clk_base + CLK_SOURCE_CSITE);
+
+ tegra114_cpu_clk_sctx.cclkg_burst =
+ readl(clk_base + CCLKG_BURST_POLICY);
+ tegra114_cpu_clk_sctx.cclkg_divider =
+ readl(clk_base + CCLKG_BURST_POLICY + 4);
+}
+
+static void tegra114_cpu_clock_resume(void)
+{
+ writel(tegra114_cpu_clk_sctx.clk_csite_src,
+ clk_base + CLK_SOURCE_CSITE);
+
+ writel(tegra114_cpu_clk_sctx.cclkg_burst,
+ clk_base + CCLKG_BURST_POLICY);
+ writel(tegra114_cpu_clk_sctx.cclkg_divider,
+ clk_base + CCLKG_BURST_POLICY + 4);
+}
+#endif
+
static struct tegra_cpu_car_ops tegra114_cpu_car_ops = {
.wait_for_reset = tegra114_wait_cpu_in_reset,
.disable_clock = tegra114_disable_cpu_clock,
+#ifdef CONFIG_PM_SLEEP
+ .suspend = tegra114_cpu_clock_suspend,
+ .resume = tegra114_cpu_clock_resume,
+#endif
};
static const struct of_device_id pmc_match[] __initconst = {
diff --git a/drivers/memory/mvebu-devbus.c b/drivers/memory/mvebu-devbus.c
index 978e8e3..110c036 100644
--- a/drivers/memory/mvebu-devbus.c
+++ b/drivers/memory/mvebu-devbus.c
@@ -44,14 +44,6 @@
#define READ_PARAM_OFFSET 0x0
#define WRITE_PARAM_OFFSET 0x4
-static const char * const devbus_wins[] = {
- "devbus-boot",
- "devbus-cs0",
- "devbus-cs1",
- "devbus-cs2",
- "devbus-cs3",
-};
-
struct devbus_read_params {
u32 bus_width;
u32 badr_skew;
@@ -208,16 +200,11 @@
{
struct device *dev = &pdev->dev;
struct device_node *node = pdev->dev.of_node;
- struct device_node *parent;
struct devbus *devbus;
struct resource *res;
struct clk *clk;
unsigned long rate;
- const __be32 *ranges;
- int err, cs;
- int addr_cells, p_addr_cells, size_cells;
- int ranges_len, tuple_len;
- u32 base, size;
+ int err;
devbus = devm_kzalloc(&pdev->dev, sizeof(struct devbus), GFP_KERNEL);
if (!devbus)
@@ -248,68 +235,13 @@
return err;
/*
- * Allocate an address window for this device.
- * If the device probing fails, then we won't be able to
- * remove the allocated address decoding window.
- *
- * FIXME: This is only a temporary hack! We need to do this here
- * because we still don't have device tree bindings for mbus.
- * Once that support is added, we will declare these address windows
- * statically in the device tree, and remove the window configuration
- * from here.
- */
-
- /*
- * Get the CS to choose the window string.
- * This is a bit hacky, but it will be removed once the
- * address windows are declared in the device tree.
- */
- cs = (((unsigned long)devbus->base) % 0x400) / 8;
-
- /*
- * Parse 'ranges' property to obtain a (base,size) window tuple.
- * This will be removed once the address windows
- * are declared in the device tree.
- */
- parent = of_get_parent(node);
- if (!parent)
- return -EINVAL;
-
- p_addr_cells = of_n_addr_cells(parent);
- of_node_put(parent);
-
- addr_cells = of_n_addr_cells(node);
- size_cells = of_n_size_cells(node);
- tuple_len = (p_addr_cells + addr_cells + size_cells) * sizeof(__be32);
-
- ranges = of_get_property(node, "ranges", &ranges_len);
- if (ranges == NULL || ranges_len != tuple_len)
- return -EINVAL;
-
- base = of_translate_address(node, ranges + addr_cells);
- if (base == OF_BAD_ADDR)
- return -EINVAL;
- size = of_read_number(ranges + addr_cells + p_addr_cells, size_cells);
-
- /*
- * Create an mbus address windows.
- * FIXME: Remove this, together with the above code, once the
- * address windows are declared in the device tree.
- */
- err = mvebu_mbus_add_window(devbus_wins[cs], base, size);
- if (err < 0)
- return err;
-
- /*
* We need to create a child device explicitly from here to
* guarantee that the child will be probed after the timing
* parameters for the bus are written.
*/
err = of_platform_populate(node, NULL, NULL, dev);
- if (err < 0) {
- mvebu_mbus_del_window(base, size);
+ if (err < 0)
return err;
- }
return 0;
}
diff --git a/drivers/of/of_pci.c b/drivers/of/of_pci.c
index 42c687a..e5ca008 100644
--- a/drivers/of/of_pci.c
+++ b/drivers/of/of_pci.c
@@ -89,3 +89,48 @@
return 0;
}
EXPORT_SYMBOL_GPL(of_pci_parse_bus_range);
+
+#ifdef CONFIG_PCI_MSI
+
+static LIST_HEAD(of_pci_msi_chip_list);
+static DEFINE_MUTEX(of_pci_msi_chip_mutex);
+
+int of_pci_msi_chip_add(struct msi_chip *chip)
+{
+ if (!of_property_read_bool(chip->of_node, "msi-controller"))
+ return -EINVAL;
+
+ mutex_lock(&of_pci_msi_chip_mutex);
+ list_add(&chip->list, &of_pci_msi_chip_list);
+ mutex_unlock(&of_pci_msi_chip_mutex);
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(of_pci_msi_chip_add);
+
+void of_pci_msi_chip_remove(struct msi_chip *chip)
+{
+ mutex_lock(&of_pci_msi_chip_mutex);
+ list_del(&chip->list);
+ mutex_unlock(&of_pci_msi_chip_mutex);
+}
+EXPORT_SYMBOL_GPL(of_pci_msi_chip_remove);
+
+struct msi_chip *of_pci_find_msi_chip_by_node(struct device_node *of_node)
+{
+ struct msi_chip *c;
+
+ mutex_lock(&of_pci_msi_chip_mutex);
+ list_for_each_entry(c, &of_pci_msi_chip_list, list) {
+ if (c->of_node == of_node) {
+ mutex_unlock(&of_pci_msi_chip_mutex);
+ return c;
+ }
+ }
+ mutex_unlock(&of_pci_msi_chip_mutex);
+
+ return NULL;
+}
+EXPORT_SYMBOL_GPL(of_pci_find_msi_chip_by_node);
+
+#endif /* CONFIG_PCI_MSI */
diff --git a/drivers/pci/Kconfig b/drivers/pci/Kconfig
index 81944fb..b6a99f7 100644
--- a/drivers/pci/Kconfig
+++ b/drivers/pci/Kconfig
@@ -1,13 +1,9 @@
#
# PCI configuration
#
-config ARCH_SUPPORTS_MSI
- bool
-
config PCI_MSI
bool "Message Signaled Interrupts (MSI and MSI-X)"
depends on PCI
- depends on ARCH_SUPPORTS_MSI
help
This allows device drivers to enable MSI (Message Signaled
Interrupts). Message Signaled Interrupts enable a device to
diff --git a/drivers/pci/host/Kconfig b/drivers/pci/host/Kconfig
index e5ba4eb..3d95048 100644
--- a/drivers/pci/host/Kconfig
+++ b/drivers/pci/host/Kconfig
@@ -15,4 +15,8 @@
select PCIEPORTBUS
select PCIE_DW
+config PCI_TEGRA
+ bool "NVIDIA Tegra PCIe controller"
+ depends on ARCH_TEGRA
+
endmenu
diff --git a/drivers/pci/host/Makefile b/drivers/pci/host/Makefile
index ab79ccb..c9a997b 100644
--- a/drivers/pci/host/Makefile
+++ b/drivers/pci/host/Makefile
@@ -1,3 +1,4 @@
obj-$(CONFIG_PCIE_DW) += pcie-designware.o
obj-$(CONFIG_PCI_EXYNOS) += pci-exynos.o
obj-$(CONFIG_PCI_MVEBU) += pci-mvebu.o
+obj-$(CONFIG_PCI_TEGRA) += pci-tegra.o
diff --git a/drivers/pci/host/pci-mvebu.c b/drivers/pci/host/pci-mvebu.c
index ce1543a..729d5a1 100644
--- a/drivers/pci/host/pci-mvebu.c
+++ b/drivers/pci/host/pci-mvebu.c
@@ -119,6 +119,10 @@
u32 port;
u32 lane;
int devfn;
+ unsigned int mem_target;
+ unsigned int mem_attr;
+ unsigned int io_target;
+ unsigned int io_attr;
struct clk *clk;
struct mvebu_sw_pci_bridge bridge;
struct device_node *dn;
@@ -303,10 +307,9 @@
(port->bridge.iolimitupper << 16)) -
iobase);
- mvebu_mbus_add_window_remap_flags(port->name, port->iowin_base,
- port->iowin_size,
- iobase,
- MVEBU_MBUS_PCI_IO);
+ mvebu_mbus_add_window_remap_by_id(port->io_target, port->io_attr,
+ port->iowin_base, port->iowin_size,
+ iobase);
pci_ioremap_io(iobase, port->iowin_base);
}
@@ -338,10 +341,8 @@
(((port->bridge.memlimit & 0xFFF0) << 16) | 0xFFFFF) -
port->memwin_base;
- mvebu_mbus_add_window_remap_flags(port->name, port->memwin_base,
- port->memwin_size,
- MVEBU_MBUS_NO_REMAP,
- MVEBU_MBUS_PCI_MEM);
+ mvebu_mbus_add_window_by_id(port->mem_target, port->mem_attr,
+ port->memwin_base, port->memwin_size);
}
/*
@@ -636,6 +637,8 @@
for (i = 0; i < pcie->nports; i++) {
struct mvebu_pcie_port *port = &pcie->ports[i];
+ if (!port->base)
+ continue;
mvebu_pcie_setup_hw(port);
}
@@ -730,12 +733,54 @@
return devm_ioremap_resource(&pdev->dev, ®s);
}
+#define DT_FLAGS_TO_TYPE(flags) (((flags) >> 24) & 0x03)
+#define DT_TYPE_IO 0x1
+#define DT_TYPE_MEM32 0x2
+#define DT_CPUADDR_TO_TARGET(cpuaddr) (((cpuaddr) >> 56) & 0xFF)
+#define DT_CPUADDR_TO_ATTR(cpuaddr) (((cpuaddr) >> 48) & 0xFF)
+
+static int mvebu_get_tgt_attr(struct device_node *np, int devfn,
+ unsigned long type, int *tgt, int *attr)
+{
+ const int na = 3, ns = 2;
+ const __be32 *range;
+ int rlen, nranges, rangesz, pna, i;
+
+ range = of_get_property(np, "ranges", &rlen);
+ if (!range)
+ return -EINVAL;
+
+ pna = of_n_addr_cells(np);
+ rangesz = pna + na + ns;
+ nranges = rlen / sizeof(__be32) / rangesz;
+
+ for (i = 0; i < nranges; i++) {
+ u32 flags = of_read_number(range, 1);
+ u32 slot = of_read_number(range, 2);
+ u64 cpuaddr = of_read_number(range + na, pna);
+ unsigned long rtype;
+
+ if (DT_FLAGS_TO_TYPE(flags) == DT_TYPE_IO)
+ rtype = IORESOURCE_IO;
+ else if (DT_FLAGS_TO_TYPE(flags) == DT_TYPE_MEM32)
+ rtype = IORESOURCE_MEM;
+
+ if (slot == PCI_SLOT(devfn) && type == rtype) {
+ *tgt = DT_CPUADDR_TO_TARGET(cpuaddr);
+ *attr = DT_CPUADDR_TO_ATTR(cpuaddr);
+ return 0;
+ }
+
+ range += rangesz;
+ }
+
+ return -ENOENT;
+}
+
static int __init mvebu_pcie_probe(struct platform_device *pdev)
{
struct mvebu_pcie *pcie;
struct device_node *np = pdev->dev.of_node;
- struct of_pci_range range;
- struct of_pci_range_parser parser;
struct device_node *child;
int i, ret;
@@ -746,29 +791,25 @@
pcie->pdev = pdev;
- if (of_pci_range_parser_init(&parser, np))
+ /* Get the PCIe memory and I/O aperture */
+ mvebu_mbus_get_pcie_mem_aperture(&pcie->mem);
+ if (resource_size(&pcie->mem) == 0) {
+ dev_err(&pdev->dev, "invalid memory aperture size\n");
return -EINVAL;
-
- /* Get the I/O and memory ranges from DT */
- for_each_of_pci_range(&parser, &range) {
- unsigned long restype = range.flags & IORESOURCE_TYPE_BITS;
- if (restype == IORESOURCE_IO) {
- of_pci_range_to_resource(&range, np, &pcie->io);
- of_pci_range_to_resource(&range, np, &pcie->realio);
- pcie->io.name = "I/O";
- pcie->realio.start = max_t(resource_size_t,
- PCIBIOS_MIN_IO,
- range.pci_addr);
- pcie->realio.end = min_t(resource_size_t,
- IO_SPACE_LIMIT,
- range.pci_addr + range.size);
- }
- if (restype == IORESOURCE_MEM) {
- of_pci_range_to_resource(&range, np, &pcie->mem);
- pcie->mem.name = "MEM";
- }
}
+ mvebu_mbus_get_pcie_io_aperture(&pcie->io);
+ if (resource_size(&pcie->io) == 0) {
+ dev_err(&pdev->dev, "invalid I/O aperture size\n");
+ return -EINVAL;
+ }
+
+ pcie->realio.flags = pcie->io.flags;
+ pcie->realio.start = PCIBIOS_MIN_IO;
+ pcie->realio.end = min_t(resource_size_t,
+ IO_SPACE_LIMIT,
+ resource_size(&pcie->io));
+
/* Get the bus range */
ret = of_pci_parse_bus_range(np, &pcie->busn);
if (ret) {
@@ -816,6 +857,22 @@
if (port->devfn < 0)
continue;
+ ret = mvebu_get_tgt_attr(np, port->devfn, IORESOURCE_MEM,
+ &port->mem_target, &port->mem_attr);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "PCIe%d.%d: cannot get tgt/attr for mem window\n",
+ port->port, port->lane);
+ continue;
+ }
+
+ ret = mvebu_get_tgt_attr(np, port->devfn, IORESOURCE_IO,
+ &port->io_target, &port->io_attr);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "PCIe%d.%d: cannot get tgt/attr for io window\n",
+ port->port, port->lane);
+ continue;
+ }
+
port->base = mvebu_pcie_map_registers(pdev, child, port);
if (IS_ERR(port->base)) {
dev_err(&pdev->dev, "PCIe%d.%d: cannot map registers\n",
diff --git a/drivers/pci/host/pci-tegra.c b/drivers/pci/host/pci-tegra.c
new file mode 100644
index 0000000..2e9888a
--- /dev/null
+++ b/drivers/pci/host/pci-tegra.c
@@ -0,0 +1,1691 @@
+/*
+ * PCIe host controller driver for Tegra SoCs
+ *
+ * Copyright (c) 2010, CompuLab, Ltd.
+ * Author: Mike Rapoport <mike@compulab.co.il>
+ *
+ * Based on NVIDIA PCIe driver
+ * Copyright (c) 2008-2009, NVIDIA Corporation.
+ *
+ * Bits taken from arch/arm/mach-dove/pcie.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+ */
+
+#include <linux/clk.h>
+#include <linux/clk/tegra.h>
+#include <linux/delay.h>
+#include <linux/export.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/irqdomain.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/msi.h>
+#include <linux/of_address.h>
+#include <linux/of_pci.h>
+#include <linux/of_platform.h>
+#include <linux/pci.h>
+#include <linux/platform_device.h>
+#include <linux/sizes.h>
+#include <linux/slab.h>
+#include <linux/tegra-cpuidle.h>
+#include <linux/tegra-powergate.h>
+#include <linux/vmalloc.h>
+#include <linux/regulator/consumer.h>
+
+#include <asm/mach/irq.h>
+#include <asm/mach/map.h>
+#include <asm/mach/pci.h>
+
+#define INT_PCI_MSI_NR (8 * 32)
+
+/* register definitions */
+
+#define AFI_AXI_BAR0_SZ 0x00
+#define AFI_AXI_BAR1_SZ 0x04
+#define AFI_AXI_BAR2_SZ 0x08
+#define AFI_AXI_BAR3_SZ 0x0c
+#define AFI_AXI_BAR4_SZ 0x10
+#define AFI_AXI_BAR5_SZ 0x14
+
+#define AFI_AXI_BAR0_START 0x18
+#define AFI_AXI_BAR1_START 0x1c
+#define AFI_AXI_BAR2_START 0x20
+#define AFI_AXI_BAR3_START 0x24
+#define AFI_AXI_BAR4_START 0x28
+#define AFI_AXI_BAR5_START 0x2c
+
+#define AFI_FPCI_BAR0 0x30
+#define AFI_FPCI_BAR1 0x34
+#define AFI_FPCI_BAR2 0x38
+#define AFI_FPCI_BAR3 0x3c
+#define AFI_FPCI_BAR4 0x40
+#define AFI_FPCI_BAR5 0x44
+
+#define AFI_CACHE_BAR0_SZ 0x48
+#define AFI_CACHE_BAR0_ST 0x4c
+#define AFI_CACHE_BAR1_SZ 0x50
+#define AFI_CACHE_BAR1_ST 0x54
+
+#define AFI_MSI_BAR_SZ 0x60
+#define AFI_MSI_FPCI_BAR_ST 0x64
+#define AFI_MSI_AXI_BAR_ST 0x68
+
+#define AFI_MSI_VEC0 0x6c
+#define AFI_MSI_VEC1 0x70
+#define AFI_MSI_VEC2 0x74
+#define AFI_MSI_VEC3 0x78
+#define AFI_MSI_VEC4 0x7c
+#define AFI_MSI_VEC5 0x80
+#define AFI_MSI_VEC6 0x84
+#define AFI_MSI_VEC7 0x88
+
+#define AFI_MSI_EN_VEC0 0x8c
+#define AFI_MSI_EN_VEC1 0x90
+#define AFI_MSI_EN_VEC2 0x94
+#define AFI_MSI_EN_VEC3 0x98
+#define AFI_MSI_EN_VEC4 0x9c
+#define AFI_MSI_EN_VEC5 0xa0
+#define AFI_MSI_EN_VEC6 0xa4
+#define AFI_MSI_EN_VEC7 0xa8
+
+#define AFI_CONFIGURATION 0xac
+#define AFI_CONFIGURATION_EN_FPCI (1 << 0)
+
+#define AFI_FPCI_ERROR_MASKS 0xb0
+
+#define AFI_INTR_MASK 0xb4
+#define AFI_INTR_MASK_INT_MASK (1 << 0)
+#define AFI_INTR_MASK_MSI_MASK (1 << 8)
+
+#define AFI_INTR_CODE 0xb8
+#define AFI_INTR_CODE_MASK 0xf
+#define AFI_INTR_AXI_SLAVE_ERROR 1
+#define AFI_INTR_AXI_DECODE_ERROR 2
+#define AFI_INTR_TARGET_ABORT 3
+#define AFI_INTR_MASTER_ABORT 4
+#define AFI_INTR_INVALID_WRITE 5
+#define AFI_INTR_LEGACY 6
+#define AFI_INTR_FPCI_DECODE_ERROR 7
+
+#define AFI_INTR_SIGNATURE 0xbc
+#define AFI_UPPER_FPCI_ADDRESS 0xc0
+#define AFI_SM_INTR_ENABLE 0xc4
+#define AFI_SM_INTR_INTA_ASSERT (1 << 0)
+#define AFI_SM_INTR_INTB_ASSERT (1 << 1)
+#define AFI_SM_INTR_INTC_ASSERT (1 << 2)
+#define AFI_SM_INTR_INTD_ASSERT (1 << 3)
+#define AFI_SM_INTR_INTA_DEASSERT (1 << 4)
+#define AFI_SM_INTR_INTB_DEASSERT (1 << 5)
+#define AFI_SM_INTR_INTC_DEASSERT (1 << 6)
+#define AFI_SM_INTR_INTD_DEASSERT (1 << 7)
+
+#define AFI_AFI_INTR_ENABLE 0xc8
+#define AFI_INTR_EN_INI_SLVERR (1 << 0)
+#define AFI_INTR_EN_INI_DECERR (1 << 1)
+#define AFI_INTR_EN_TGT_SLVERR (1 << 2)
+#define AFI_INTR_EN_TGT_DECERR (1 << 3)
+#define AFI_INTR_EN_TGT_WRERR (1 << 4)
+#define AFI_INTR_EN_DFPCI_DECERR (1 << 5)
+#define AFI_INTR_EN_AXI_DECERR (1 << 6)
+#define AFI_INTR_EN_FPCI_TIMEOUT (1 << 7)
+#define AFI_INTR_EN_PRSNT_SENSE (1 << 8)
+
+#define AFI_PCIE_CONFIG 0x0f8
+#define AFI_PCIE_CONFIG_PCIE_DISABLE(x) (1 << ((x) + 1))
+#define AFI_PCIE_CONFIG_PCIE_DISABLE_ALL 0xe
+#define AFI_PCIE_CONFIG_SM2TMS0_XBAR_CONFIG_MASK (0xf << 20)
+#define AFI_PCIE_CONFIG_SM2TMS0_XBAR_CONFIG_SINGLE (0x0 << 20)
+#define AFI_PCIE_CONFIG_SM2TMS0_XBAR_CONFIG_420 (0x0 << 20)
+#define AFI_PCIE_CONFIG_SM2TMS0_XBAR_CONFIG_DUAL (0x1 << 20)
+#define AFI_PCIE_CONFIG_SM2TMS0_XBAR_CONFIG_222 (0x1 << 20)
+#define AFI_PCIE_CONFIG_SM2TMS0_XBAR_CONFIG_411 (0x2 << 20)
+
+#define AFI_FUSE 0x104
+#define AFI_FUSE_PCIE_T0_GEN2_DIS (1 << 2)
+
+#define AFI_PEX0_CTRL 0x110
+#define AFI_PEX1_CTRL 0x118
+#define AFI_PEX2_CTRL 0x128
+#define AFI_PEX_CTRL_RST (1 << 0)
+#define AFI_PEX_CTRL_CLKREQ_EN (1 << 1)
+#define AFI_PEX_CTRL_REFCLK_EN (1 << 3)
+
+#define AFI_PEXBIAS_CTRL_0 0x168
+
+#define RP_VEND_XP 0x00000F00
+#define RP_VEND_XP_DL_UP (1 << 30)
+
+#define RP_LINK_CONTROL_STATUS 0x00000090
+#define RP_LINK_CONTROL_STATUS_DL_LINK_ACTIVE 0x20000000
+#define RP_LINK_CONTROL_STATUS_LINKSTAT_MASK 0x3fff0000
+
+#define PADS_CTL_SEL 0x0000009C
+
+#define PADS_CTL 0x000000A0
+#define PADS_CTL_IDDQ_1L (1 << 0)
+#define PADS_CTL_TX_DATA_EN_1L (1 << 6)
+#define PADS_CTL_RX_DATA_EN_1L (1 << 10)
+
+#define PADS_PLL_CTL_TEGRA20 0x000000B8
+#define PADS_PLL_CTL_TEGRA30 0x000000B4
+#define PADS_PLL_CTL_RST_B4SM (1 << 1)
+#define PADS_PLL_CTL_LOCKDET (1 << 8)
+#define PADS_PLL_CTL_REFCLK_MASK (0x3 << 16)
+#define PADS_PLL_CTL_REFCLK_INTERNAL_CML (0 << 16)
+#define PADS_PLL_CTL_REFCLK_INTERNAL_CMOS (1 << 16)
+#define PADS_PLL_CTL_REFCLK_EXTERNAL (2 << 16)
+#define PADS_PLL_CTL_TXCLKREF_MASK (0x1 << 20)
+#define PADS_PLL_CTL_TXCLKREF_DIV10 (0 << 20)
+#define PADS_PLL_CTL_TXCLKREF_DIV5 (1 << 20)
+#define PADS_PLL_CTL_TXCLKREF_BUF_EN (1 << 22)
+
+#define PADS_REFCLK_CFG0 0x000000C8
+#define PADS_REFCLK_CFG1 0x000000CC
+
+/*
+ * Fields in PADS_REFCLK_CFG*. Those registers form an array of 16-bit
+ * entries, one entry per PCIe port. These field definitions and desired
+ * values aren't in the TRM, but do come from NVIDIA.
+ */
+#define PADS_REFCLK_CFG_TERM_SHIFT 2 /* 6:2 */
+#define PADS_REFCLK_CFG_E_TERM_SHIFT 7
+#define PADS_REFCLK_CFG_PREDI_SHIFT 8 /* 11:8 */
+#define PADS_REFCLK_CFG_DRVI_SHIFT 12 /* 15:12 */
+
+/* Default value provided by HW engineering is 0xfa5c */
+#define PADS_REFCLK_CFG_VALUE \
+ ( \
+ (0x17 << PADS_REFCLK_CFG_TERM_SHIFT) | \
+ (0 << PADS_REFCLK_CFG_E_TERM_SHIFT) | \
+ (0xa << PADS_REFCLK_CFG_PREDI_SHIFT) | \
+ (0xf << PADS_REFCLK_CFG_DRVI_SHIFT) \
+ )
+
+struct tegra_msi {
+ struct msi_chip chip;
+ DECLARE_BITMAP(used, INT_PCI_MSI_NR);
+ struct irq_domain *domain;
+ unsigned long pages;
+ struct mutex lock;
+ int irq;
+};
+
+/* used to differentiate between Tegra SoC generations */
+struct tegra_pcie_soc_data {
+ unsigned int num_ports;
+ unsigned int msi_base_shift;
+ u32 pads_pll_ctl;
+ u32 tx_ref_sel;
+ bool has_pex_clkreq_en;
+ bool has_pex_bias_ctrl;
+ bool has_intr_prsnt_sense;
+ bool has_avdd_supply;
+ bool has_cml_clk;
+};
+
+static inline struct tegra_msi *to_tegra_msi(struct msi_chip *chip)
+{
+ return container_of(chip, struct tegra_msi, chip);
+}
+
+struct tegra_pcie {
+ struct device *dev;
+
+ void __iomem *pads;
+ void __iomem *afi;
+ int irq;
+
+ struct list_head busses;
+ struct resource *cs;
+
+ struct resource io;
+ struct resource mem;
+ struct resource prefetch;
+ struct resource busn;
+
+ struct clk *pex_clk;
+ struct clk *afi_clk;
+ struct clk *pcie_xclk;
+ struct clk *pll_e;
+ struct clk *cml_clk;
+
+ struct tegra_msi msi;
+
+ struct list_head ports;
+ unsigned int num_ports;
+ u32 xbar_config;
+
+ struct regulator *pex_clk_supply;
+ struct regulator *vdd_supply;
+ struct regulator *avdd_supply;
+
+ const struct tegra_pcie_soc_data *soc_data;
+};
+
+struct tegra_pcie_port {
+ struct tegra_pcie *pcie;
+ struct list_head list;
+ struct resource regs;
+ void __iomem *base;
+ unsigned int index;
+ unsigned int lanes;
+};
+
+struct tegra_pcie_bus {
+ struct vm_struct *area;
+ struct list_head list;
+ unsigned int nr;
+};
+
+static inline struct tegra_pcie *sys_to_pcie(struct pci_sys_data *sys)
+{
+ return sys->private_data;
+}
+
+static inline void afi_writel(struct tegra_pcie *pcie, u32 value,
+ unsigned long offset)
+{
+ writel(value, pcie->afi + offset);
+}
+
+static inline u32 afi_readl(struct tegra_pcie *pcie, unsigned long offset)
+{
+ return readl(pcie->afi + offset);
+}
+
+static inline void pads_writel(struct tegra_pcie *pcie, u32 value,
+ unsigned long offset)
+{
+ writel(value, pcie->pads + offset);
+}
+
+static inline u32 pads_readl(struct tegra_pcie *pcie, unsigned long offset)
+{
+ return readl(pcie->pads + offset);
+}
+
+/*
+ * The configuration space mapping on Tegra is somewhat similar to the ECAM
+ * defined by PCIe. However it deviates a bit in how the 4 bits for extended
+ * register accesses are mapped:
+ *
+ * [27:24] extended register number
+ * [23:16] bus number
+ * [15:11] device number
+ * [10: 8] function number
+ * [ 7: 0] register number
+ *
+ * Mapping the whole extended configuration space would require 256 MiB of
+ * virtual address space, only a small part of which will actually be used.
+ * To work around this, a 1 MiB of virtual addresses are allocated per bus
+ * when the bus is first accessed. When the physical range is mapped, the
+ * the bus number bits are hidden so that the extended register number bits
+ * appear as bits [19:16]. Therefore the virtual mapping looks like this:
+ *
+ * [19:16] extended register number
+ * [15:11] device number
+ * [10: 8] function number
+ * [ 7: 0] register number
+ *
+ * This is achieved by stitching together 16 chunks of 64 KiB of physical
+ * address space via the MMU.
+ */
+static unsigned long tegra_pcie_conf_offset(unsigned int devfn, int where)
+{
+ return ((where & 0xf00) << 8) | (PCI_SLOT(devfn) << 11) |
+ (PCI_FUNC(devfn) << 8) | (where & 0xfc);
+}
+
+static struct tegra_pcie_bus *tegra_pcie_bus_alloc(struct tegra_pcie *pcie,
+ unsigned int busnr)
+{
+ pgprot_t prot = L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_DIRTY | L_PTE_XN |
+ L_PTE_MT_DEV_SHARED | L_PTE_SHARED;
+ phys_addr_t cs = pcie->cs->start;
+ struct tegra_pcie_bus *bus;
+ unsigned int i;
+ int err;
+
+ bus = kzalloc(sizeof(*bus), GFP_KERNEL);
+ if (!bus)
+ return ERR_PTR(-ENOMEM);
+
+ INIT_LIST_HEAD(&bus->list);
+ bus->nr = busnr;
+
+ /* allocate 1 MiB of virtual addresses */
+ bus->area = get_vm_area(SZ_1M, VM_IOREMAP);
+ if (!bus->area) {
+ err = -ENOMEM;
+ goto free;
+ }
+
+ /* map each of the 16 chunks of 64 KiB each */
+ for (i = 0; i < 16; i++) {
+ unsigned long virt = (unsigned long)bus->area->addr +
+ i * SZ_64K;
+ phys_addr_t phys = cs + i * SZ_1M + busnr * SZ_64K;
+
+ err = ioremap_page_range(virt, virt + SZ_64K, phys, prot);
+ if (err < 0) {
+ dev_err(pcie->dev, "ioremap_page_range() failed: %d\n",
+ err);
+ goto unmap;
+ }
+ }
+
+ return bus;
+
+unmap:
+ vunmap(bus->area->addr);
+free:
+ kfree(bus);
+ return ERR_PTR(err);
+}
+
+/*
+ * Look up a virtual address mapping for the specified bus number. If no such
+ * mapping existis, try to create one.
+ */
+static void __iomem *tegra_pcie_bus_map(struct tegra_pcie *pcie,
+ unsigned int busnr)
+{
+ struct tegra_pcie_bus *bus;
+
+ list_for_each_entry(bus, &pcie->busses, list)
+ if (bus->nr == busnr)
+ return bus->area->addr;
+
+ bus = tegra_pcie_bus_alloc(pcie, busnr);
+ if (IS_ERR(bus))
+ return NULL;
+
+ list_add_tail(&bus->list, &pcie->busses);
+
+ return bus->area->addr;
+}
+
+static void __iomem *tegra_pcie_conf_address(struct pci_bus *bus,
+ unsigned int devfn,
+ int where)
+{
+ struct tegra_pcie *pcie = sys_to_pcie(bus->sysdata);
+ void __iomem *addr = NULL;
+
+ if (bus->number == 0) {
+ unsigned int slot = PCI_SLOT(devfn);
+ struct tegra_pcie_port *port;
+
+ list_for_each_entry(port, &pcie->ports, list) {
+ if (port->index + 1 == slot) {
+ addr = port->base + (where & ~3);
+ break;
+ }
+ }
+ } else {
+ addr = tegra_pcie_bus_map(pcie, bus->number);
+ if (!addr) {
+ dev_err(pcie->dev,
+ "failed to map cfg. space for bus %u\n",
+ bus->number);
+ return NULL;
+ }
+
+ addr += tegra_pcie_conf_offset(devfn, where);
+ }
+
+ return addr;
+}
+
+static int tegra_pcie_read_conf(struct pci_bus *bus, unsigned int devfn,
+ int where, int size, u32 *value)
+{
+ void __iomem *addr;
+
+ addr = tegra_pcie_conf_address(bus, devfn, where);
+ if (!addr) {
+ *value = 0xffffffff;
+ return PCIBIOS_DEVICE_NOT_FOUND;
+ }
+
+ *value = readl(addr);
+
+ if (size == 1)
+ *value = (*value >> (8 * (where & 3))) & 0xff;
+ else if (size == 2)
+ *value = (*value >> (8 * (where & 3))) & 0xffff;
+
+ return PCIBIOS_SUCCESSFUL;
+}
+
+static int tegra_pcie_write_conf(struct pci_bus *bus, unsigned int devfn,
+ int where, int size, u32 value)
+{
+ void __iomem *addr;
+ u32 mask, tmp;
+
+ addr = tegra_pcie_conf_address(bus, devfn, where);
+ if (!addr)
+ return PCIBIOS_DEVICE_NOT_FOUND;
+
+ if (size == 4) {
+ writel(value, addr);
+ return PCIBIOS_SUCCESSFUL;
+ }
+
+ if (size == 2)
+ mask = ~(0xffff << ((where & 0x3) * 8));
+ else if (size == 1)
+ mask = ~(0xff << ((where & 0x3) * 8));
+ else
+ return PCIBIOS_BAD_REGISTER_NUMBER;
+
+ tmp = readl(addr) & mask;
+ tmp |= value << ((where & 0x3) * 8);
+ writel(tmp, addr);
+
+ return PCIBIOS_SUCCESSFUL;
+}
+
+static struct pci_ops tegra_pcie_ops = {
+ .read = tegra_pcie_read_conf,
+ .write = tegra_pcie_write_conf,
+};
+
+static unsigned long tegra_pcie_port_get_pex_ctrl(struct tegra_pcie_port *port)
+{
+ unsigned long ret = 0;
+
+ switch (port->index) {
+ case 0:
+ ret = AFI_PEX0_CTRL;
+ break;
+
+ case 1:
+ ret = AFI_PEX1_CTRL;
+ break;
+
+ case 2:
+ ret = AFI_PEX2_CTRL;
+ break;
+ }
+
+ return ret;
+}
+
+static void tegra_pcie_port_reset(struct tegra_pcie_port *port)
+{
+ unsigned long ctrl = tegra_pcie_port_get_pex_ctrl(port);
+ unsigned long value;
+
+ /* pulse reset signal */
+ value = afi_readl(port->pcie, ctrl);
+ value &= ~AFI_PEX_CTRL_RST;
+ afi_writel(port->pcie, value, ctrl);
+
+ usleep_range(1000, 2000);
+
+ value = afi_readl(port->pcie, ctrl);
+ value |= AFI_PEX_CTRL_RST;
+ afi_writel(port->pcie, value, ctrl);
+}
+
+static void tegra_pcie_port_enable(struct tegra_pcie_port *port)
+{
+ const struct tegra_pcie_soc_data *soc = port->pcie->soc_data;
+ unsigned long ctrl = tegra_pcie_port_get_pex_ctrl(port);
+ unsigned long value;
+
+ /* enable reference clock */
+ value = afi_readl(port->pcie, ctrl);
+ value |= AFI_PEX_CTRL_REFCLK_EN;
+
+ if (soc->has_pex_clkreq_en)
+ value |= AFI_PEX_CTRL_CLKREQ_EN;
+
+ afi_writel(port->pcie, value, ctrl);
+
+ tegra_pcie_port_reset(port);
+}
+
+static void tegra_pcie_port_disable(struct tegra_pcie_port *port)
+{
+ unsigned long ctrl = tegra_pcie_port_get_pex_ctrl(port);
+ unsigned long value;
+
+ /* assert port reset */
+ value = afi_readl(port->pcie, ctrl);
+ value &= ~AFI_PEX_CTRL_RST;
+ afi_writel(port->pcie, value, ctrl);
+
+ /* disable reference clock */
+ value = afi_readl(port->pcie, ctrl);
+ value &= ~AFI_PEX_CTRL_REFCLK_EN;
+ afi_writel(port->pcie, value, ctrl);
+}
+
+static void tegra_pcie_port_free(struct tegra_pcie_port *port)
+{
+ struct tegra_pcie *pcie = port->pcie;
+
+ devm_iounmap(pcie->dev, port->base);
+ devm_release_mem_region(pcie->dev, port->regs.start,
+ resource_size(&port->regs));
+ list_del(&port->list);
+ devm_kfree(pcie->dev, port);
+}
+
+static void tegra_pcie_fixup_bridge(struct pci_dev *dev)
+{
+ u16 reg;
+
+ if ((dev->class >> 16) == PCI_BASE_CLASS_BRIDGE) {
+ pci_read_config_word(dev, PCI_COMMAND, ®);
+ reg |= (PCI_COMMAND_IO | PCI_COMMAND_MEMORY |
+ PCI_COMMAND_MASTER | PCI_COMMAND_SERR);
+ pci_write_config_word(dev, PCI_COMMAND, reg);
+ }
+}
+DECLARE_PCI_FIXUP_FINAL(PCI_ANY_ID, PCI_ANY_ID, tegra_pcie_fixup_bridge);
+
+/* Tegra PCIE root complex wrongly reports device class */
+static void tegra_pcie_fixup_class(struct pci_dev *dev)
+{
+ dev->class = PCI_CLASS_BRIDGE_PCI << 8;
+}
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_NVIDIA, 0x0bf0, tegra_pcie_fixup_class);
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_NVIDIA, 0x0bf1, tegra_pcie_fixup_class);
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_NVIDIA, 0x0e1c, tegra_pcie_fixup_class);
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_NVIDIA, 0x0e1d, tegra_pcie_fixup_class);
+
+/* Tegra PCIE requires relaxed ordering */
+static void tegra_pcie_relax_enable(struct pci_dev *dev)
+{
+ pcie_capability_set_word(dev, PCI_EXP_DEVCTL, PCI_EXP_DEVCTL_RELAX_EN);
+}
+DECLARE_PCI_FIXUP_FINAL(PCI_ANY_ID, PCI_ANY_ID, tegra_pcie_relax_enable);
+
+static int tegra_pcie_setup(int nr, struct pci_sys_data *sys)
+{
+ struct tegra_pcie *pcie = sys_to_pcie(sys);
+
+ pci_add_resource_offset(&sys->resources, &pcie->mem, sys->mem_offset);
+ pci_add_resource_offset(&sys->resources, &pcie->prefetch,
+ sys->mem_offset);
+ pci_add_resource(&sys->resources, &pcie->busn);
+
+ pci_ioremap_io(nr * SZ_64K, pcie->io.start);
+
+ return 1;
+}
+
+static int tegra_pcie_map_irq(const struct pci_dev *pdev, u8 slot, u8 pin)
+{
+ struct tegra_pcie *pcie = sys_to_pcie(pdev->bus->sysdata);
+
+ tegra_cpuidle_pcie_irqs_in_use();
+
+ return pcie->irq;
+}
+
+static void tegra_pcie_add_bus(struct pci_bus *bus)
+{
+ if (IS_ENABLED(CONFIG_PCI_MSI)) {
+ struct tegra_pcie *pcie = sys_to_pcie(bus->sysdata);
+
+ bus->msi = &pcie->msi.chip;
+ }
+}
+
+static struct pci_bus *tegra_pcie_scan_bus(int nr, struct pci_sys_data *sys)
+{
+ struct tegra_pcie *pcie = sys_to_pcie(sys);
+ struct pci_bus *bus;
+
+ bus = pci_create_root_bus(pcie->dev, sys->busnr, &tegra_pcie_ops, sys,
+ &sys->resources);
+ if (!bus)
+ return NULL;
+
+ pci_scan_child_bus(bus);
+
+ return bus;
+}
+
+static irqreturn_t tegra_pcie_isr(int irq, void *arg)
+{
+ const char *err_msg[] = {
+ "Unknown",
+ "AXI slave error",
+ "AXI decode error",
+ "Target abort",
+ "Master abort",
+ "Invalid write",
+ "Response decoding error",
+ "AXI response decoding error",
+ "Transaction timeout",
+ };
+ struct tegra_pcie *pcie = arg;
+ u32 code, signature;
+
+ code = afi_readl(pcie, AFI_INTR_CODE) & AFI_INTR_CODE_MASK;
+ signature = afi_readl(pcie, AFI_INTR_SIGNATURE);
+ afi_writel(pcie, 0, AFI_INTR_CODE);
+
+ if (code == AFI_INTR_LEGACY)
+ return IRQ_NONE;
+
+ if (code >= ARRAY_SIZE(err_msg))
+ code = 0;
+
+ /*
+ * do not pollute kernel log with master abort reports since they
+ * happen a lot during enumeration
+ */
+ if (code == AFI_INTR_MASTER_ABORT)
+ dev_dbg(pcie->dev, "%s, signature: %08x\n", err_msg[code],
+ signature);
+ else
+ dev_err(pcie->dev, "%s, signature: %08x\n", err_msg[code],
+ signature);
+
+ if (code == AFI_INTR_TARGET_ABORT || code == AFI_INTR_MASTER_ABORT ||
+ code == AFI_INTR_FPCI_DECODE_ERROR) {
+ u32 fpci = afi_readl(pcie, AFI_UPPER_FPCI_ADDRESS) & 0xff;
+ u64 address = (u64)fpci << 32 | (signature & 0xfffffffc);
+
+ if (code == AFI_INTR_MASTER_ABORT)
+ dev_dbg(pcie->dev, " FPCI address: %10llx\n", address);
+ else
+ dev_err(pcie->dev, " FPCI address: %10llx\n", address);
+ }
+
+ return IRQ_HANDLED;
+}
+
+/*
+ * FPCI map is as follows:
+ * - 0xfdfc000000: I/O space
+ * - 0xfdfe000000: type 0 configuration space
+ * - 0xfdff000000: type 1 configuration space
+ * - 0xfe00000000: type 0 extended configuration space
+ * - 0xfe10000000: type 1 extended configuration space
+ */
+static void tegra_pcie_setup_translations(struct tegra_pcie *pcie)
+{
+ u32 fpci_bar, size, axi_address;
+
+ /* Bar 0: type 1 extended configuration space */
+ fpci_bar = 0xfe100000;
+ size = resource_size(pcie->cs);
+ axi_address = pcie->cs->start;
+ afi_writel(pcie, axi_address, AFI_AXI_BAR0_START);
+ afi_writel(pcie, size >> 12, AFI_AXI_BAR0_SZ);
+ afi_writel(pcie, fpci_bar, AFI_FPCI_BAR0);
+
+ /* Bar 1: downstream IO bar */
+ fpci_bar = 0xfdfc0000;
+ size = resource_size(&pcie->io);
+ axi_address = pcie->io.start;
+ afi_writel(pcie, axi_address, AFI_AXI_BAR1_START);
+ afi_writel(pcie, size >> 12, AFI_AXI_BAR1_SZ);
+ afi_writel(pcie, fpci_bar, AFI_FPCI_BAR1);
+
+ /* Bar 2: prefetchable memory BAR */
+ fpci_bar = (((pcie->prefetch.start >> 12) & 0x0fffffff) << 4) | 0x1;
+ size = resource_size(&pcie->prefetch);
+ axi_address = pcie->prefetch.start;
+ afi_writel(pcie, axi_address, AFI_AXI_BAR2_START);
+ afi_writel(pcie, size >> 12, AFI_AXI_BAR2_SZ);
+ afi_writel(pcie, fpci_bar, AFI_FPCI_BAR2);
+
+ /* Bar 3: non prefetchable memory BAR */
+ fpci_bar = (((pcie->mem.start >> 12) & 0x0fffffff) << 4) | 0x1;
+ size = resource_size(&pcie->mem);
+ axi_address = pcie->mem.start;
+ afi_writel(pcie, axi_address, AFI_AXI_BAR3_START);
+ afi_writel(pcie, size >> 12, AFI_AXI_BAR3_SZ);
+ afi_writel(pcie, fpci_bar, AFI_FPCI_BAR3);
+
+ /* NULL out the remaining BARs as they are not used */
+ afi_writel(pcie, 0, AFI_AXI_BAR4_START);
+ afi_writel(pcie, 0, AFI_AXI_BAR4_SZ);
+ afi_writel(pcie, 0, AFI_FPCI_BAR4);
+
+ afi_writel(pcie, 0, AFI_AXI_BAR5_START);
+ afi_writel(pcie, 0, AFI_AXI_BAR5_SZ);
+ afi_writel(pcie, 0, AFI_FPCI_BAR5);
+
+ /* map all upstream transactions as uncached */
+ afi_writel(pcie, PHYS_OFFSET, AFI_CACHE_BAR0_ST);
+ afi_writel(pcie, 0, AFI_CACHE_BAR0_SZ);
+ afi_writel(pcie, 0, AFI_CACHE_BAR1_ST);
+ afi_writel(pcie, 0, AFI_CACHE_BAR1_SZ);
+
+ /* MSI translations are setup only when needed */
+ afi_writel(pcie, 0, AFI_MSI_FPCI_BAR_ST);
+ afi_writel(pcie, 0, AFI_MSI_BAR_SZ);
+ afi_writel(pcie, 0, AFI_MSI_AXI_BAR_ST);
+ afi_writel(pcie, 0, AFI_MSI_BAR_SZ);
+}
+
+static int tegra_pcie_enable_controller(struct tegra_pcie *pcie)
+{
+ const struct tegra_pcie_soc_data *soc = pcie->soc_data;
+ struct tegra_pcie_port *port;
+ unsigned int timeout;
+ unsigned long value;
+
+ /* power down PCIe slot clock bias pad */
+ if (soc->has_pex_bias_ctrl)
+ afi_writel(pcie, 0, AFI_PEXBIAS_CTRL_0);
+
+ /* configure mode and disable all ports */
+ value = afi_readl(pcie, AFI_PCIE_CONFIG);
+ value &= ~AFI_PCIE_CONFIG_SM2TMS0_XBAR_CONFIG_MASK;
+ value |= AFI_PCIE_CONFIG_PCIE_DISABLE_ALL | pcie->xbar_config;
+
+ list_for_each_entry(port, &pcie->ports, list)
+ value &= ~AFI_PCIE_CONFIG_PCIE_DISABLE(port->index);
+
+ afi_writel(pcie, value, AFI_PCIE_CONFIG);
+
+ value = afi_readl(pcie, AFI_FUSE);
+ value &= ~AFI_FUSE_PCIE_T0_GEN2_DIS;
+ afi_writel(pcie, value, AFI_FUSE);
+
+ /* initialze internal PHY, enable up to 16 PCIE lanes */
+ pads_writel(pcie, 0x0, PADS_CTL_SEL);
+
+ /* override IDDQ to 1 on all 4 lanes */
+ value = pads_readl(pcie, PADS_CTL);
+ value |= PADS_CTL_IDDQ_1L;
+ pads_writel(pcie, value, PADS_CTL);
+
+ /*
+ * Set up PHY PLL inputs select PLLE output as refclock,
+ * set TX ref sel to div10 (not div5).
+ */
+ value = pads_readl(pcie, soc->pads_pll_ctl);
+ value &= ~(PADS_PLL_CTL_REFCLK_MASK | PADS_PLL_CTL_TXCLKREF_MASK);
+ value |= PADS_PLL_CTL_REFCLK_INTERNAL_CML | soc->tx_ref_sel;
+ pads_writel(pcie, value, soc->pads_pll_ctl);
+
+ /* take PLL out of reset */
+ value = pads_readl(pcie, soc->pads_pll_ctl);
+ value |= PADS_PLL_CTL_RST_B4SM;
+ pads_writel(pcie, value, soc->pads_pll_ctl);
+
+ /* Configure the reference clock driver */
+ value = PADS_REFCLK_CFG_VALUE | (PADS_REFCLK_CFG_VALUE << 16);
+ pads_writel(pcie, value, PADS_REFCLK_CFG0);
+ if (soc->num_ports > 2)
+ pads_writel(pcie, PADS_REFCLK_CFG_VALUE, PADS_REFCLK_CFG1);
+
+ /* wait for the PLL to lock */
+ timeout = 300;
+ do {
+ value = pads_readl(pcie, soc->pads_pll_ctl);
+ usleep_range(1000, 2000);
+ if (--timeout == 0) {
+ pr_err("Tegra PCIe error: timeout waiting for PLL\n");
+ return -EBUSY;
+ }
+ } while (!(value & PADS_PLL_CTL_LOCKDET));
+
+ /* turn off IDDQ override */
+ value = pads_readl(pcie, PADS_CTL);
+ value &= ~PADS_CTL_IDDQ_1L;
+ pads_writel(pcie, value, PADS_CTL);
+
+ /* enable TX/RX data */
+ value = pads_readl(pcie, PADS_CTL);
+ value |= PADS_CTL_TX_DATA_EN_1L | PADS_CTL_RX_DATA_EN_1L;
+ pads_writel(pcie, value, PADS_CTL);
+
+ /* take the PCIe interface module out of reset */
+ tegra_periph_reset_deassert(pcie->pcie_xclk);
+
+ /* finally enable PCIe */
+ value = afi_readl(pcie, AFI_CONFIGURATION);
+ value |= AFI_CONFIGURATION_EN_FPCI;
+ afi_writel(pcie, value, AFI_CONFIGURATION);
+
+ value = AFI_INTR_EN_INI_SLVERR | AFI_INTR_EN_INI_DECERR |
+ AFI_INTR_EN_TGT_SLVERR | AFI_INTR_EN_TGT_DECERR |
+ AFI_INTR_EN_TGT_WRERR | AFI_INTR_EN_DFPCI_DECERR;
+
+ if (soc->has_intr_prsnt_sense)
+ value |= AFI_INTR_EN_PRSNT_SENSE;
+
+ afi_writel(pcie, value, AFI_AFI_INTR_ENABLE);
+ afi_writel(pcie, 0xffffffff, AFI_SM_INTR_ENABLE);
+
+ /* don't enable MSI for now, only when needed */
+ afi_writel(pcie, AFI_INTR_MASK_INT_MASK, AFI_INTR_MASK);
+
+ /* disable all exceptions */
+ afi_writel(pcie, 0, AFI_FPCI_ERROR_MASKS);
+
+ return 0;
+}
+
+static void tegra_pcie_power_off(struct tegra_pcie *pcie)
+{
+ const struct tegra_pcie_soc_data *soc = pcie->soc_data;
+ int err;
+
+ /* TODO: disable and unprepare clocks? */
+
+ tegra_periph_reset_assert(pcie->pcie_xclk);
+ tegra_periph_reset_assert(pcie->afi_clk);
+ tegra_periph_reset_assert(pcie->pex_clk);
+
+ tegra_powergate_power_off(TEGRA_POWERGATE_PCIE);
+
+ if (soc->has_avdd_supply) {
+ err = regulator_disable(pcie->avdd_supply);
+ if (err < 0)
+ dev_warn(pcie->dev,
+ "failed to disable AVDD regulator: %d\n",
+ err);
+ }
+
+ err = regulator_disable(pcie->pex_clk_supply);
+ if (err < 0)
+ dev_warn(pcie->dev, "failed to disable pex-clk regulator: %d\n",
+ err);
+
+ err = regulator_disable(pcie->vdd_supply);
+ if (err < 0)
+ dev_warn(pcie->dev, "failed to disable VDD regulator: %d\n",
+ err);
+}
+
+static int tegra_pcie_power_on(struct tegra_pcie *pcie)
+{
+ const struct tegra_pcie_soc_data *soc = pcie->soc_data;
+ int err;
+
+ tegra_periph_reset_assert(pcie->pcie_xclk);
+ tegra_periph_reset_assert(pcie->afi_clk);
+ tegra_periph_reset_assert(pcie->pex_clk);
+
+ tegra_powergate_power_off(TEGRA_POWERGATE_PCIE);
+
+ /* enable regulators */
+ err = regulator_enable(pcie->vdd_supply);
+ if (err < 0) {
+ dev_err(pcie->dev, "failed to enable VDD regulator: %d\n", err);
+ return err;
+ }
+
+ err = regulator_enable(pcie->pex_clk_supply);
+ if (err < 0) {
+ dev_err(pcie->dev, "failed to enable pex-clk regulator: %d\n",
+ err);
+ return err;
+ }
+
+ if (soc->has_avdd_supply) {
+ err = regulator_enable(pcie->avdd_supply);
+ if (err < 0) {
+ dev_err(pcie->dev,
+ "failed to enable AVDD regulator: %d\n",
+ err);
+ return err;
+ }
+ }
+
+ err = tegra_powergate_sequence_power_up(TEGRA_POWERGATE_PCIE,
+ pcie->pex_clk);
+ if (err) {
+ dev_err(pcie->dev, "powerup sequence failed: %d\n", err);
+ return err;
+ }
+
+ tegra_periph_reset_deassert(pcie->afi_clk);
+
+ err = clk_prepare_enable(pcie->afi_clk);
+ if (err < 0) {
+ dev_err(pcie->dev, "failed to enable AFI clock: %d\n", err);
+ return err;
+ }
+
+ if (soc->has_cml_clk) {
+ err = clk_prepare_enable(pcie->cml_clk);
+ if (err < 0) {
+ dev_err(pcie->dev, "failed to enable CML clock: %d\n",
+ err);
+ return err;
+ }
+ }
+
+ err = clk_prepare_enable(pcie->pll_e);
+ if (err < 0) {
+ dev_err(pcie->dev, "failed to enable PLLE clock: %d\n", err);
+ return err;
+ }
+
+ return 0;
+}
+
+static int tegra_pcie_clocks_get(struct tegra_pcie *pcie)
+{
+ const struct tegra_pcie_soc_data *soc = pcie->soc_data;
+
+ pcie->pex_clk = devm_clk_get(pcie->dev, "pex");
+ if (IS_ERR(pcie->pex_clk))
+ return PTR_ERR(pcie->pex_clk);
+
+ pcie->afi_clk = devm_clk_get(pcie->dev, "afi");
+ if (IS_ERR(pcie->afi_clk))
+ return PTR_ERR(pcie->afi_clk);
+
+ pcie->pcie_xclk = devm_clk_get(pcie->dev, "pcie_xclk");
+ if (IS_ERR(pcie->pcie_xclk))
+ return PTR_ERR(pcie->pcie_xclk);
+
+ pcie->pll_e = devm_clk_get(pcie->dev, "pll_e");
+ if (IS_ERR(pcie->pll_e))
+ return PTR_ERR(pcie->pll_e);
+
+ if (soc->has_cml_clk) {
+ pcie->cml_clk = devm_clk_get(pcie->dev, "cml");
+ if (IS_ERR(pcie->cml_clk))
+ return PTR_ERR(pcie->cml_clk);
+ }
+
+ return 0;
+}
+
+static int tegra_pcie_get_resources(struct tegra_pcie *pcie)
+{
+ struct platform_device *pdev = to_platform_device(pcie->dev);
+ struct resource *pads, *afi, *res;
+ int err;
+
+ err = tegra_pcie_clocks_get(pcie);
+ if (err) {
+ dev_err(&pdev->dev, "failed to get clocks: %d\n", err);
+ return err;
+ }
+
+ err = tegra_pcie_power_on(pcie);
+ if (err) {
+ dev_err(&pdev->dev, "failed to power up: %d\n", err);
+ return err;
+ }
+
+ pads = platform_get_resource_byname(pdev, IORESOURCE_MEM, "pads");
+ pcie->pads = devm_ioremap_resource(&pdev->dev, pads);
+ if (IS_ERR(pcie->pads)) {
+ err = PTR_ERR(pcie->pads);
+ goto poweroff;
+ }
+
+ afi = platform_get_resource_byname(pdev, IORESOURCE_MEM, "afi");
+ pcie->afi = devm_ioremap_resource(&pdev->dev, afi);
+ if (IS_ERR(pcie->afi)) {
+ err = PTR_ERR(pcie->afi);
+ goto poweroff;
+ }
+
+ /* request configuration space, but remap later, on demand */
+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "cs");
+ if (!res) {
+ err = -EADDRNOTAVAIL;
+ goto poweroff;
+ }
+
+ pcie->cs = devm_request_mem_region(pcie->dev, res->start,
+ resource_size(res), res->name);
+ if (!pcie->cs) {
+ err = -EADDRNOTAVAIL;
+ goto poweroff;
+ }
+
+ /* request interrupt */
+ err = platform_get_irq_byname(pdev, "intr");
+ if (err < 0) {
+ dev_err(&pdev->dev, "failed to get IRQ: %d\n", err);
+ goto poweroff;
+ }
+
+ pcie->irq = err;
+
+ err = request_irq(pcie->irq, tegra_pcie_isr, IRQF_SHARED, "PCIE", pcie);
+ if (err) {
+ dev_err(&pdev->dev, "failed to register IRQ: %d\n", err);
+ goto poweroff;
+ }
+
+ return 0;
+
+poweroff:
+ tegra_pcie_power_off(pcie);
+ return err;
+}
+
+static int tegra_pcie_put_resources(struct tegra_pcie *pcie)
+{
+ if (pcie->irq > 0)
+ free_irq(pcie->irq, pcie);
+
+ tegra_pcie_power_off(pcie);
+ return 0;
+}
+
+static int tegra_msi_alloc(struct tegra_msi *chip)
+{
+ int msi;
+
+ mutex_lock(&chip->lock);
+
+ msi = find_first_zero_bit(chip->used, INT_PCI_MSI_NR);
+ if (msi < INT_PCI_MSI_NR)
+ set_bit(msi, chip->used);
+ else
+ msi = -ENOSPC;
+
+ mutex_unlock(&chip->lock);
+
+ return msi;
+}
+
+static void tegra_msi_free(struct tegra_msi *chip, unsigned long irq)
+{
+ struct device *dev = chip->chip.dev;
+
+ mutex_lock(&chip->lock);
+
+ if (!test_bit(irq, chip->used))
+ dev_err(dev, "trying to free unused MSI#%lu\n", irq);
+ else
+ clear_bit(irq, chip->used);
+
+ mutex_unlock(&chip->lock);
+}
+
+static irqreturn_t tegra_pcie_msi_irq(int irq, void *data)
+{
+ struct tegra_pcie *pcie = data;
+ struct tegra_msi *msi = &pcie->msi;
+ unsigned int i, processed = 0;
+
+ for (i = 0; i < 8; i++) {
+ unsigned long reg = afi_readl(pcie, AFI_MSI_VEC0 + i * 4);
+
+ while (reg) {
+ unsigned int offset = find_first_bit(®, 32);
+ unsigned int index = i * 32 + offset;
+ unsigned int irq;
+
+ /* clear the interrupt */
+ afi_writel(pcie, 1 << offset, AFI_MSI_VEC0 + i * 4);
+
+ irq = irq_find_mapping(msi->domain, index);
+ if (irq) {
+ if (test_bit(index, msi->used))
+ generic_handle_irq(irq);
+ else
+ dev_info(pcie->dev, "unhandled MSI\n");
+ } else {
+ /*
+ * that's weird who triggered this?
+ * just clear it
+ */
+ dev_info(pcie->dev, "unexpected MSI\n");
+ }
+
+ /* see if there's any more pending in this vector */
+ reg = afi_readl(pcie, AFI_MSI_VEC0 + i * 4);
+
+ processed++;
+ }
+ }
+
+ return processed > 0 ? IRQ_HANDLED : IRQ_NONE;
+}
+
+static int tegra_msi_setup_irq(struct msi_chip *chip, struct pci_dev *pdev,
+ struct msi_desc *desc)
+{
+ struct tegra_msi *msi = to_tegra_msi(chip);
+ struct msi_msg msg;
+ unsigned int irq;
+ int hwirq;
+
+ hwirq = tegra_msi_alloc(msi);
+ if (hwirq < 0)
+ return hwirq;
+
+ irq = irq_create_mapping(msi->domain, hwirq);
+ if (!irq)
+ return -EINVAL;
+
+ irq_set_msi_desc(irq, desc);
+
+ msg.address_lo = virt_to_phys((void *)msi->pages);
+ /* 32 bit address only */
+ msg.address_hi = 0;
+ msg.data = hwirq;
+
+ write_msi_msg(irq, &msg);
+
+ return 0;
+}
+
+static void tegra_msi_teardown_irq(struct msi_chip *chip, unsigned int irq)
+{
+ struct tegra_msi *msi = to_tegra_msi(chip);
+ struct irq_data *d = irq_get_irq_data(irq);
+
+ tegra_msi_free(msi, d->hwirq);
+}
+
+static struct irq_chip tegra_msi_irq_chip = {
+ .name = "Tegra PCIe MSI",
+ .irq_enable = unmask_msi_irq,
+ .irq_disable = mask_msi_irq,
+ .irq_mask = mask_msi_irq,
+ .irq_unmask = unmask_msi_irq,
+};
+
+static int tegra_msi_map(struct irq_domain *domain, unsigned int irq,
+ irq_hw_number_t hwirq)
+{
+ irq_set_chip_and_handler(irq, &tegra_msi_irq_chip, handle_simple_irq);
+ irq_set_chip_data(irq, domain->host_data);
+ set_irq_flags(irq, IRQF_VALID);
+
+ tegra_cpuidle_pcie_irqs_in_use();
+
+ return 0;
+}
+
+static const struct irq_domain_ops msi_domain_ops = {
+ .map = tegra_msi_map,
+};
+
+static int tegra_pcie_enable_msi(struct tegra_pcie *pcie)
+{
+ struct platform_device *pdev = to_platform_device(pcie->dev);
+ const struct tegra_pcie_soc_data *soc = pcie->soc_data;
+ struct tegra_msi *msi = &pcie->msi;
+ unsigned long base;
+ int err;
+ u32 reg;
+
+ mutex_init(&msi->lock);
+
+ msi->chip.dev = pcie->dev;
+ msi->chip.setup_irq = tegra_msi_setup_irq;
+ msi->chip.teardown_irq = tegra_msi_teardown_irq;
+
+ msi->domain = irq_domain_add_linear(pcie->dev->of_node, INT_PCI_MSI_NR,
+ &msi_domain_ops, &msi->chip);
+ if (!msi->domain) {
+ dev_err(&pdev->dev, "failed to create IRQ domain\n");
+ return -ENOMEM;
+ }
+
+ err = platform_get_irq_byname(pdev, "msi");
+ if (err < 0) {
+ dev_err(&pdev->dev, "failed to get IRQ: %d\n", err);
+ goto err;
+ }
+
+ msi->irq = err;
+
+ err = request_irq(msi->irq, tegra_pcie_msi_irq, 0,
+ tegra_msi_irq_chip.name, pcie);
+ if (err < 0) {
+ dev_err(&pdev->dev, "failed to request IRQ: %d\n", err);
+ goto err;
+ }
+
+ /* setup AFI/FPCI range */
+ msi->pages = __get_free_pages(GFP_KERNEL, 0);
+ base = virt_to_phys((void *)msi->pages);
+
+ afi_writel(pcie, base >> soc->msi_base_shift, AFI_MSI_FPCI_BAR_ST);
+ afi_writel(pcie, base, AFI_MSI_AXI_BAR_ST);
+ /* this register is in 4K increments */
+ afi_writel(pcie, 1, AFI_MSI_BAR_SZ);
+
+ /* enable all MSI vectors */
+ afi_writel(pcie, 0xffffffff, AFI_MSI_EN_VEC0);
+ afi_writel(pcie, 0xffffffff, AFI_MSI_EN_VEC1);
+ afi_writel(pcie, 0xffffffff, AFI_MSI_EN_VEC2);
+ afi_writel(pcie, 0xffffffff, AFI_MSI_EN_VEC3);
+ afi_writel(pcie, 0xffffffff, AFI_MSI_EN_VEC4);
+ afi_writel(pcie, 0xffffffff, AFI_MSI_EN_VEC5);
+ afi_writel(pcie, 0xffffffff, AFI_MSI_EN_VEC6);
+ afi_writel(pcie, 0xffffffff, AFI_MSI_EN_VEC7);
+
+ /* and unmask the MSI interrupt */
+ reg = afi_readl(pcie, AFI_INTR_MASK);
+ reg |= AFI_INTR_MASK_MSI_MASK;
+ afi_writel(pcie, reg, AFI_INTR_MASK);
+
+ return 0;
+
+err:
+ irq_domain_remove(msi->domain);
+ return err;
+}
+
+static int tegra_pcie_disable_msi(struct tegra_pcie *pcie)
+{
+ struct tegra_msi *msi = &pcie->msi;
+ unsigned int i, irq;
+ u32 value;
+
+ /* mask the MSI interrupt */
+ value = afi_readl(pcie, AFI_INTR_MASK);
+ value &= ~AFI_INTR_MASK_MSI_MASK;
+ afi_writel(pcie, value, AFI_INTR_MASK);
+
+ /* disable all MSI vectors */
+ afi_writel(pcie, 0, AFI_MSI_EN_VEC0);
+ afi_writel(pcie, 0, AFI_MSI_EN_VEC1);
+ afi_writel(pcie, 0, AFI_MSI_EN_VEC2);
+ afi_writel(pcie, 0, AFI_MSI_EN_VEC3);
+ afi_writel(pcie, 0, AFI_MSI_EN_VEC4);
+ afi_writel(pcie, 0, AFI_MSI_EN_VEC5);
+ afi_writel(pcie, 0, AFI_MSI_EN_VEC6);
+ afi_writel(pcie, 0, AFI_MSI_EN_VEC7);
+
+ free_pages(msi->pages, 0);
+
+ if (msi->irq > 0)
+ free_irq(msi->irq, pcie);
+
+ for (i = 0; i < INT_PCI_MSI_NR; i++) {
+ irq = irq_find_mapping(msi->domain, i);
+ if (irq > 0)
+ irq_dispose_mapping(irq);
+ }
+
+ irq_domain_remove(msi->domain);
+
+ return 0;
+}
+
+static int tegra_pcie_get_xbar_config(struct tegra_pcie *pcie, u32 lanes,
+ u32 *xbar)
+{
+ struct device_node *np = pcie->dev->of_node;
+
+ if (of_device_is_compatible(np, "nvidia,tegra30-pcie")) {
+ switch (lanes) {
+ case 0x00000204:
+ dev_info(pcie->dev, "4x1, 2x1 configuration\n");
+ *xbar = AFI_PCIE_CONFIG_SM2TMS0_XBAR_CONFIG_420;
+ return 0;
+
+ case 0x00020202:
+ dev_info(pcie->dev, "2x3 configuration\n");
+ *xbar = AFI_PCIE_CONFIG_SM2TMS0_XBAR_CONFIG_222;
+ return 0;
+
+ case 0x00010104:
+ dev_info(pcie->dev, "4x1, 1x2 configuration\n");
+ *xbar = AFI_PCIE_CONFIG_SM2TMS0_XBAR_CONFIG_411;
+ return 0;
+ }
+ } else if (of_device_is_compatible(np, "nvidia,tegra20-pcie")) {
+ switch (lanes) {
+ case 0x00000004:
+ dev_info(pcie->dev, "single-mode configuration\n");
+ *xbar = AFI_PCIE_CONFIG_SM2TMS0_XBAR_CONFIG_SINGLE;
+ return 0;
+
+ case 0x00000202:
+ dev_info(pcie->dev, "dual-mode configuration\n");
+ *xbar = AFI_PCIE_CONFIG_SM2TMS0_XBAR_CONFIG_DUAL;
+ return 0;
+ }
+ }
+
+ return -EINVAL;
+}
+
+static int tegra_pcie_parse_dt(struct tegra_pcie *pcie)
+{
+ const struct tegra_pcie_soc_data *soc = pcie->soc_data;
+ struct device_node *np = pcie->dev->of_node, *port;
+ struct of_pci_range_parser parser;
+ struct of_pci_range range;
+ struct resource res;
+ u32 lanes = 0;
+ int err;
+
+ if (of_pci_range_parser_init(&parser, np)) {
+ dev_err(pcie->dev, "missing \"ranges\" property\n");
+ return -EINVAL;
+ }
+
+ pcie->vdd_supply = devm_regulator_get(pcie->dev, "vdd");
+ if (IS_ERR(pcie->vdd_supply))
+ return PTR_ERR(pcie->vdd_supply);
+
+ pcie->pex_clk_supply = devm_regulator_get(pcie->dev, "pex-clk");
+ if (IS_ERR(pcie->pex_clk_supply))
+ return PTR_ERR(pcie->pex_clk_supply);
+
+ if (soc->has_avdd_supply) {
+ pcie->avdd_supply = devm_regulator_get(pcie->dev, "avdd");
+ if (IS_ERR(pcie->avdd_supply))
+ return PTR_ERR(pcie->avdd_supply);
+ }
+
+ for_each_of_pci_range(&parser, &range) {
+ of_pci_range_to_resource(&range, np, &res);
+
+ switch (res.flags & IORESOURCE_TYPE_BITS) {
+ case IORESOURCE_IO:
+ memcpy(&pcie->io, &res, sizeof(res));
+ pcie->io.name = "I/O";
+ break;
+
+ case IORESOURCE_MEM:
+ if (res.flags & IORESOURCE_PREFETCH) {
+ memcpy(&pcie->prefetch, &res, sizeof(res));
+ pcie->prefetch.name = "PREFETCH";
+ } else {
+ memcpy(&pcie->mem, &res, sizeof(res));
+ pcie->mem.name = "MEM";
+ }
+ break;
+ }
+ }
+
+ err = of_pci_parse_bus_range(np, &pcie->busn);
+ if (err < 0) {
+ dev_err(pcie->dev, "failed to parse ranges property: %d\n",
+ err);
+ pcie->busn.name = np->name;
+ pcie->busn.start = 0;
+ pcie->busn.end = 0xff;
+ pcie->busn.flags = IORESOURCE_BUS;
+ }
+
+ /* parse root ports */
+ for_each_child_of_node(np, port) {
+ struct tegra_pcie_port *rp;
+ unsigned int index;
+ u32 value;
+
+ err = of_pci_get_devfn(port);
+ if (err < 0) {
+ dev_err(pcie->dev, "failed to parse address: %d\n",
+ err);
+ return err;
+ }
+
+ index = PCI_SLOT(err);
+
+ if (index < 1 || index > soc->num_ports) {
+ dev_err(pcie->dev, "invalid port number: %d\n", index);
+ return -EINVAL;
+ }
+
+ index--;
+
+ err = of_property_read_u32(port, "nvidia,num-lanes", &value);
+ if (err < 0) {
+ dev_err(pcie->dev, "failed to parse # of lanes: %d\n",
+ err);
+ return err;
+ }
+
+ if (value > 16) {
+ dev_err(pcie->dev, "invalid # of lanes: %u\n", value);
+ return -EINVAL;
+ }
+
+ lanes |= value << (index << 3);
+
+ if (!of_device_is_available(port))
+ continue;
+
+ rp = devm_kzalloc(pcie->dev, sizeof(*rp), GFP_KERNEL);
+ if (!rp)
+ return -ENOMEM;
+
+ err = of_address_to_resource(port, 0, &rp->regs);
+ if (err < 0) {
+ dev_err(pcie->dev, "failed to parse address: %d\n",
+ err);
+ return err;
+ }
+
+ INIT_LIST_HEAD(&rp->list);
+ rp->index = index;
+ rp->lanes = value;
+ rp->pcie = pcie;
+
+ rp->base = devm_ioremap_resource(pcie->dev, &rp->regs);
+ if (IS_ERR(rp->base))
+ return PTR_ERR(rp->base);
+
+ list_add_tail(&rp->list, &pcie->ports);
+ }
+
+ err = tegra_pcie_get_xbar_config(pcie, lanes, &pcie->xbar_config);
+ if (err < 0) {
+ dev_err(pcie->dev, "invalid lane configuration\n");
+ return err;
+ }
+
+ return 0;
+}
+
+/*
+ * FIXME: If there are no PCIe cards attached, then calling this function
+ * can result in the increase of the bootup time as there are big timeout
+ * loops.
+ */
+#define TEGRA_PCIE_LINKUP_TIMEOUT 200 /* up to 1.2 seconds */
+static bool tegra_pcie_port_check_link(struct tegra_pcie_port *port)
+{
+ unsigned int retries = 3;
+ unsigned long value;
+
+ do {
+ unsigned int timeout = TEGRA_PCIE_LINKUP_TIMEOUT;
+
+ do {
+ value = readl(port->base + RP_VEND_XP);
+
+ if (value & RP_VEND_XP_DL_UP)
+ break;
+
+ usleep_range(1000, 2000);
+ } while (--timeout);
+
+ if (!timeout) {
+ dev_err(port->pcie->dev, "link %u down, retrying\n",
+ port->index);
+ goto retry;
+ }
+
+ timeout = TEGRA_PCIE_LINKUP_TIMEOUT;
+
+ do {
+ value = readl(port->base + RP_LINK_CONTROL_STATUS);
+
+ if (value & RP_LINK_CONTROL_STATUS_DL_LINK_ACTIVE)
+ return true;
+
+ usleep_range(1000, 2000);
+ } while (--timeout);
+
+retry:
+ tegra_pcie_port_reset(port);
+ } while (--retries);
+
+ return false;
+}
+
+static int tegra_pcie_enable(struct tegra_pcie *pcie)
+{
+ struct tegra_pcie_port *port, *tmp;
+ struct hw_pci hw;
+
+ list_for_each_entry_safe(port, tmp, &pcie->ports, list) {
+ dev_info(pcie->dev, "probing port %u, using %u lanes\n",
+ port->index, port->lanes);
+
+ tegra_pcie_port_enable(port);
+
+ if (tegra_pcie_port_check_link(port))
+ continue;
+
+ dev_info(pcie->dev, "link %u down, ignoring\n", port->index);
+
+ tegra_pcie_port_disable(port);
+ tegra_pcie_port_free(port);
+ }
+
+ memset(&hw, 0, sizeof(hw));
+
+ hw.nr_controllers = 1;
+ hw.private_data = (void **)&pcie;
+ hw.setup = tegra_pcie_setup;
+ hw.map_irq = tegra_pcie_map_irq;
+ hw.add_bus = tegra_pcie_add_bus;
+ hw.scan = tegra_pcie_scan_bus;
+ hw.ops = &tegra_pcie_ops;
+
+ pci_common_init_dev(pcie->dev, &hw);
+
+ return 0;
+}
+
+static const struct tegra_pcie_soc_data tegra20_pcie_data = {
+ .num_ports = 2,
+ .msi_base_shift = 0,
+ .pads_pll_ctl = PADS_PLL_CTL_TEGRA20,
+ .tx_ref_sel = PADS_PLL_CTL_TXCLKREF_DIV10,
+ .has_pex_clkreq_en = false,
+ .has_pex_bias_ctrl = false,
+ .has_intr_prsnt_sense = false,
+ .has_avdd_supply = false,
+ .has_cml_clk = false,
+};
+
+static const struct tegra_pcie_soc_data tegra30_pcie_data = {
+ .num_ports = 3,
+ .msi_base_shift = 8,
+ .pads_pll_ctl = PADS_PLL_CTL_TEGRA30,
+ .tx_ref_sel = PADS_PLL_CTL_TXCLKREF_BUF_EN,
+ .has_pex_clkreq_en = true,
+ .has_pex_bias_ctrl = true,
+ .has_intr_prsnt_sense = true,
+ .has_avdd_supply = true,
+ .has_cml_clk = true,
+};
+
+static const struct of_device_id tegra_pcie_of_match[] = {
+ { .compatible = "nvidia,tegra30-pcie", .data = &tegra30_pcie_data },
+ { .compatible = "nvidia,tegra20-pcie", .data = &tegra20_pcie_data },
+ { },
+};
+MODULE_DEVICE_TABLE(of, tegra_pcie_of_match);
+
+static int tegra_pcie_probe(struct platform_device *pdev)
+{
+ const struct of_device_id *match;
+ struct tegra_pcie *pcie;
+ int err;
+
+ match = of_match_device(tegra_pcie_of_match, &pdev->dev);
+ if (!match)
+ return -ENODEV;
+
+ pcie = devm_kzalloc(&pdev->dev, sizeof(*pcie), GFP_KERNEL);
+ if (!pcie)
+ return -ENOMEM;
+
+ INIT_LIST_HEAD(&pcie->busses);
+ INIT_LIST_HEAD(&pcie->ports);
+ pcie->soc_data = match->data;
+ pcie->dev = &pdev->dev;
+
+ err = tegra_pcie_parse_dt(pcie);
+ if (err < 0)
+ return err;
+
+ pcibios_min_mem = 0;
+
+ err = tegra_pcie_get_resources(pcie);
+ if (err < 0) {
+ dev_err(&pdev->dev, "failed to request resources: %d\n", err);
+ return err;
+ }
+
+ err = tegra_pcie_enable_controller(pcie);
+ if (err)
+ goto put_resources;
+
+ /* setup the AFI address translations */
+ tegra_pcie_setup_translations(pcie);
+
+ if (IS_ENABLED(CONFIG_PCI_MSI)) {
+ err = tegra_pcie_enable_msi(pcie);
+ if (err < 0) {
+ dev_err(&pdev->dev,
+ "failed to enable MSI support: %d\n",
+ err);
+ goto put_resources;
+ }
+ }
+
+ err = tegra_pcie_enable(pcie);
+ if (err < 0) {
+ dev_err(&pdev->dev, "failed to enable PCIe ports: %d\n", err);
+ goto disable_msi;
+ }
+
+ platform_set_drvdata(pdev, pcie);
+ return 0;
+
+disable_msi:
+ if (IS_ENABLED(CONFIG_PCI_MSI))
+ tegra_pcie_disable_msi(pcie);
+put_resources:
+ tegra_pcie_put_resources(pcie);
+ return err;
+}
+
+static struct platform_driver tegra_pcie_driver = {
+ .driver = {
+ .name = "tegra-pcie",
+ .owner = THIS_MODULE,
+ .of_match_table = tegra_pcie_of_match,
+ .suppress_bind_attrs = true,
+ },
+ .probe = tegra_pcie_probe,
+};
+module_platform_driver(tegra_pcie_driver);
+
+MODULE_AUTHOR("Thierry Reding <treding@nvidia.com>");
+MODULE_DESCRIPTION("NVIDIA Tegra PCIe driver");
+MODULE_LICENSE("GPLv2");
diff --git a/drivers/pci/msi.c b/drivers/pci/msi.c
index aca7578..b35f93c 100644
--- a/drivers/pci/msi.c
+++ b/drivers/pci/msi.c
@@ -30,20 +30,60 @@
/* Arch hooks */
-#ifndef arch_msi_check_device
-int arch_msi_check_device(struct pci_dev *dev, int nvec, int type)
+#if defined(CONFIG_GENERIC_HARDIRQS)
+int __weak arch_setup_msi_irq(struct pci_dev *dev, struct msi_desc *desc)
+{
+ struct msi_chip *chip = dev->bus->msi;
+ int err;
+
+ if (!chip || !chip->setup_irq)
+ return -EINVAL;
+
+ err = chip->setup_irq(chip, dev, desc);
+ if (err < 0)
+ return err;
+
+ irq_set_chip_data(desc->irq, chip);
+
+ return 0;
+}
+
+void __weak arch_teardown_msi_irq(unsigned int irq)
+{
+ struct msi_chip *chip = irq_get_chip_data(irq);
+
+ if (!chip || !chip->teardown_irq)
+ return;
+
+ chip->teardown_irq(chip, irq);
+}
+
+int __weak arch_msi_check_device(struct pci_dev *dev, int nvec, int type)
+{
+ struct msi_chip *chip = dev->bus->msi;
+
+ if (!chip || !chip->check_device)
+ return 0;
+
+ return chip->check_device(chip, dev, nvec, type);
+}
+#else
+int __weak arch_setup_msi_irq(struct pci_dev *dev, struct msi_desc *desc)
+{
+ return -ENOSYS;
+}
+
+void __weak arch_teardown_msi_irq(unsigned int irq)
+{
+}
+
+int __weak arch_msi_check_device(struct pci_dev *dev, int nvec, int type)
{
return 0;
}
-#endif
+#endif /* CONFIG_GENERIC_HARDIRQS */
-#ifndef arch_setup_msi_irqs
-# define arch_setup_msi_irqs default_setup_msi_irqs
-# define HAVE_DEFAULT_MSI_SETUP_IRQS
-#endif
-
-#ifdef HAVE_DEFAULT_MSI_SETUP_IRQS
-int default_setup_msi_irqs(struct pci_dev *dev, int nvec, int type)
+int __weak arch_setup_msi_irqs(struct pci_dev *dev, int nvec, int type)
{
struct msi_desc *entry;
int ret;
@@ -65,14 +105,11 @@
return 0;
}
-#endif
-#ifndef arch_teardown_msi_irqs
-# define arch_teardown_msi_irqs default_teardown_msi_irqs
-# define HAVE_DEFAULT_MSI_TEARDOWN_IRQS
-#endif
-
-#ifdef HAVE_DEFAULT_MSI_TEARDOWN_IRQS
+/*
+ * We have a default implementation available as a separate non-weak
+ * function, as it is used by the Xen x86 PCI code
+ */
void default_teardown_msi_irqs(struct pci_dev *dev)
{
struct msi_desc *entry;
@@ -89,14 +126,12 @@
arch_teardown_msi_irq(entry->irq + i);
}
}
-#endif
-#ifndef arch_restore_msi_irqs
-# define arch_restore_msi_irqs default_restore_msi_irqs
-# define HAVE_DEFAULT_MSI_RESTORE_IRQS
-#endif
+void __weak arch_teardown_msi_irqs(struct pci_dev *dev)
+{
+ return default_teardown_msi_irqs(dev);
+}
-#ifdef HAVE_DEFAULT_MSI_RESTORE_IRQS
void default_restore_msi_irqs(struct pci_dev *dev, int irq)
{
struct msi_desc *entry;
@@ -114,7 +149,11 @@
if (entry)
write_msi_msg(irq, &entry->msg);
}
-#endif
+
+void __weak arch_restore_msi_irqs(struct pci_dev *dev, int irq)
+{
+ return default_restore_msi_irqs(dev, irq);
+}
static void msi_set_enable(struct pci_dev *dev, int enable)
{
diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c
index 4f9cc93..7ef0f86 100644
--- a/drivers/pci/probe.c
+++ b/drivers/pci/probe.c
@@ -671,6 +671,7 @@
child->parent = parent;
child->ops = parent->ops;
+ child->msi = parent->msi;
child->sysdata = parent->sysdata;
child->bus_flags = parent->bus_flags;
diff --git a/include/linux/mbus.h b/include/linux/mbus.h
index dba482e..345b8c5 100644
--- a/include/linux/mbus.h
+++ b/include/linux/mbus.h
@@ -11,6 +11,8 @@
#ifndef __LINUX_MBUS_H
#define __LINUX_MBUS_H
+struct resource;
+
struct mbus_dram_target_info
{
/*
@@ -59,14 +61,18 @@
}
#endif
-int mvebu_mbus_add_window_remap_flags(const char *devname, phys_addr_t base,
- size_t size, phys_addr_t remap,
- unsigned int flags);
-int mvebu_mbus_add_window(const char *devname, phys_addr_t base,
- size_t size);
+void mvebu_mbus_get_pcie_mem_aperture(struct resource *res);
+void mvebu_mbus_get_pcie_io_aperture(struct resource *res);
+int mvebu_mbus_add_window_remap_by_id(unsigned int target,
+ unsigned int attribute,
+ phys_addr_t base, size_t size,
+ phys_addr_t remap);
+int mvebu_mbus_add_window_by_id(unsigned int target, unsigned int attribute,
+ phys_addr_t base, size_t size);
int mvebu_mbus_del_window(phys_addr_t base, size_t size);
int mvebu_mbus_init(const char *soc, phys_addr_t mbus_phys_base,
size_t mbus_size, phys_addr_t sdram_phys_base,
size_t sdram_size);
+int mvebu_mbus_dt_init(void);
#endif /* __LINUX_MBUS_H */
diff --git a/include/linux/micrel_phy.h b/include/linux/micrel_phy.h
index 8752dbb..ad05ce6 100644
--- a/include/linux/micrel_phy.h
+++ b/include/linux/micrel_phy.h
@@ -17,6 +17,7 @@
#define PHY_ID_KSZ8873MLL 0x000e7237
#define PHY_ID_KSZ9021 0x00221610
+#define PHY_ID_KSZ9021RLRN 0x00221611
#define PHY_ID_KS8737 0x00221720
#define PHY_ID_KSZ8021 0x00221555
#define PHY_ID_KSZ8031 0x00221556
@@ -35,4 +36,9 @@
/* struct phy_device dev_flags definitions */
#define MICREL_PHY_50MHZ_CLK 0x00000001
+#define MICREL_KSZ9021_EXTREG_CTRL 0xB
+#define MICREL_KSZ9021_EXTREG_DATA_WRITE 0xC
+#define MICREL_KSZ9021_RGMII_CLK_CTRL_PAD_SCEW 0x104
+#define MICREL_KSZ9021_RGMII_RX_DATA_PAD_SCEW 0x105
+
#endif /* _MICREL_PHY_H */
diff --git a/include/linux/msi.h b/include/linux/msi.h
index ee66f3a..b17ead8 100644
--- a/include/linux/msi.h
+++ b/include/linux/msi.h
@@ -51,12 +51,31 @@
};
/*
- * The arch hook for setup up msi irqs
+ * The arch hooks to setup up msi irqs. Those functions are
+ * implemented as weak symbols so that they /can/ be overriden by
+ * architecture specific code if needed.
*/
int arch_setup_msi_irq(struct pci_dev *dev, struct msi_desc *desc);
void arch_teardown_msi_irq(unsigned int irq);
int arch_setup_msi_irqs(struct pci_dev *dev, int nvec, int type);
void arch_teardown_msi_irqs(struct pci_dev *dev);
int arch_msi_check_device(struct pci_dev* dev, int nvec, int type);
+void arch_restore_msi_irqs(struct pci_dev *dev, int irq);
+
+void default_teardown_msi_irqs(struct pci_dev *dev);
+void default_restore_msi_irqs(struct pci_dev *dev, int irq);
+
+struct msi_chip {
+ struct module *owner;
+ struct device *dev;
+ struct device_node *of_node;
+ struct list_head list;
+
+ int (*setup_irq)(struct msi_chip *chip, struct pci_dev *dev,
+ struct msi_desc *desc);
+ void (*teardown_irq)(struct msi_chip *chip, unsigned int irq);
+ int (*check_device)(struct msi_chip *chip, struct pci_dev *dev,
+ int nvec, int type);
+};
#endif /* LINUX_MSI_H */
diff --git a/include/linux/of_pci.h b/include/linux/of_pci.h
index 7a04826..fd9c408 100644
--- a/include/linux/of_pci.h
+++ b/include/linux/of_pci.h
@@ -2,6 +2,7 @@
#define __OF_PCI_H
#include <linux/pci.h>
+#include <linux/msi.h>
struct pci_dev;
struct of_irq;
@@ -13,4 +14,15 @@
int of_pci_get_devfn(struct device_node *np);
int of_pci_parse_bus_range(struct device_node *node, struct resource *res);
+#if defined(CONFIG_OF) && defined(CONFIG_PCI_MSI)
+int of_pci_msi_chip_add(struct msi_chip *chip);
+void of_pci_msi_chip_remove(struct msi_chip *chip);
+struct msi_chip *of_pci_find_msi_chip_by_node(struct device_node *of_node);
+#else
+static inline int of_pci_msi_chip_add(struct msi_chip *chip) { return -EINVAL; }
+static inline void of_pci_msi_chip_remove(struct msi_chip *chip) { }
+static inline struct msi_chip *
+of_pci_find_msi_chip_by_node(struct device_node *of_node) { return NULL; }
+#endif
+
#endif
diff --git a/include/linux/pci.h b/include/linux/pci.h
index 2088858..da172f9 100644
--- a/include/linux/pci.h
+++ b/include/linux/pci.h
@@ -446,6 +446,7 @@
struct resource busn_res; /* bus numbers routed to this bus */
struct pci_ops *ops; /* configuration access functions */
+ struct msi_chip *msi; /* MSI controller */
void *sysdata; /* hook for sys-specific extension */
struct proc_dir_entry *procdir; /* directory entry in /proc/bus/pci */
diff --git a/include/linux/tegra-cpuidle.h b/include/linux/tegra-cpuidle.h
new file mode 100644
index 0000000..9c6286b
--- /dev/null
+++ b/include/linux/tegra-cpuidle.h
@@ -0,0 +1,25 @@
+/*
+ * Copyright (c) 2013, NVIDIA CORPORATION. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ */
+
+#ifndef __LINUX_TEGRA_CPUIDLE_H__
+#define __LINUX_TEGRA_CPUIDLE_H__
+
+#ifdef CONFIG_CPU_IDLE
+void tegra_cpuidle_pcie_irqs_in_use(void);
+#else
+static inline void tegra_cpuidle_pcie_irqs_in_use(void)
+{
+}
+#endif
+
+#endif