| #include <linux/delay.h> |
| #include <linux/pci.h> |
| #include <linux/module.h> |
| #include <linux/sched.h> |
| #include <linux/ioport.h> |
| #include <linux/wait.h> |
| |
| #include "pci.h" |
| |
| /* |
| * This interrupt-safe spinlock protects all accesses to PCI |
| * configuration space. |
| */ |
| |
| static DEFINE_SPINLOCK(pci_lock); |
| |
| /* |
| * Wrappers for all PCI configuration access functions. They just check |
| * alignment, do locking and call the low-level functions pointed to |
| * by pci_dev->ops. |
| */ |
| |
| #define PCI_byte_BAD 0 |
| #define PCI_word_BAD (pos & 1) |
| #define PCI_dword_BAD (pos & 3) |
| |
| #define PCI_OP_READ(size,type,len) \ |
| int pci_bus_read_config_##size \ |
| (struct pci_bus *bus, unsigned int devfn, int pos, type *value) \ |
| { \ |
| int res; \ |
| unsigned long flags; \ |
| u32 data = 0; \ |
| if (PCI_##size##_BAD) return PCIBIOS_BAD_REGISTER_NUMBER; \ |
| spin_lock_irqsave(&pci_lock, flags); \ |
| res = bus->ops->read(bus, devfn, pos, len, &data); \ |
| *value = (type)data; \ |
| spin_unlock_irqrestore(&pci_lock, flags); \ |
| return res; \ |
| } |
| |
| #define PCI_OP_WRITE(size,type,len) \ |
| int pci_bus_write_config_##size \ |
| (struct pci_bus *bus, unsigned int devfn, int pos, type value) \ |
| { \ |
| int res; \ |
| unsigned long flags; \ |
| if (PCI_##size##_BAD) return PCIBIOS_BAD_REGISTER_NUMBER; \ |
| spin_lock_irqsave(&pci_lock, flags); \ |
| res = bus->ops->write(bus, devfn, pos, len, value); \ |
| spin_unlock_irqrestore(&pci_lock, flags); \ |
| return res; \ |
| } |
| |
| PCI_OP_READ(byte, u8, 1) |
| PCI_OP_READ(word, u16, 2) |
| PCI_OP_READ(dword, u32, 4) |
| PCI_OP_WRITE(byte, u8, 1) |
| PCI_OP_WRITE(word, u16, 2) |
| PCI_OP_WRITE(dword, u32, 4) |
| |
| EXPORT_SYMBOL(pci_bus_read_config_byte); |
| EXPORT_SYMBOL(pci_bus_read_config_word); |
| EXPORT_SYMBOL(pci_bus_read_config_dword); |
| EXPORT_SYMBOL(pci_bus_write_config_byte); |
| EXPORT_SYMBOL(pci_bus_write_config_word); |
| EXPORT_SYMBOL(pci_bus_write_config_dword); |
| |
| /** |
| * pci_bus_set_ops - Set raw operations of pci bus |
| * @bus: pci bus struct |
| * @ops: new raw operations |
| * |
| * Return previous raw operations |
| */ |
| struct pci_ops *pci_bus_set_ops(struct pci_bus *bus, struct pci_ops *ops) |
| { |
| struct pci_ops *old_ops; |
| unsigned long flags; |
| |
| spin_lock_irqsave(&pci_lock, flags); |
| old_ops = bus->ops; |
| bus->ops = ops; |
| spin_unlock_irqrestore(&pci_lock, flags); |
| return old_ops; |
| } |
| EXPORT_SYMBOL(pci_bus_set_ops); |
| |
| /** |
| * pci_read_vpd - Read one entry from Vital Product Data |
| * @dev: pci device struct |
| * @pos: offset in vpd space |
| * @count: number of bytes to read |
| * @buf: pointer to where to store result |
| * |
| */ |
| ssize_t pci_read_vpd(struct pci_dev *dev, loff_t pos, size_t count, void *buf) |
| { |
| if (!dev->vpd || !dev->vpd->ops) |
| return -ENODEV; |
| return dev->vpd->ops->read(dev, pos, count, buf); |
| } |
| EXPORT_SYMBOL(pci_read_vpd); |
| |
| /** |
| * pci_write_vpd - Write entry to Vital Product Data |
| * @dev: pci device struct |
| * @pos: offset in vpd space |
| * @count: number of bytes to write |
| * @buf: buffer containing write data |
| * |
| */ |
| ssize_t pci_write_vpd(struct pci_dev *dev, loff_t pos, size_t count, const void *buf) |
| { |
| if (!dev->vpd || !dev->vpd->ops) |
| return -ENODEV; |
| return dev->vpd->ops->write(dev, pos, count, buf); |
| } |
| EXPORT_SYMBOL(pci_write_vpd); |
| |
| /* |
| * The following routines are to prevent the user from accessing PCI config |
| * space when it's unsafe to do so. Some devices require this during BIST and |
| * we're required to prevent it during D-state transitions. |
| * |
| * We have a bit per device to indicate it's blocked and a global wait queue |
| * for callers to sleep on until devices are unblocked. |
| */ |
| static DECLARE_WAIT_QUEUE_HEAD(pci_ucfg_wait); |
| |
| static noinline void pci_wait_ucfg(struct pci_dev *dev) |
| { |
| DECLARE_WAITQUEUE(wait, current); |
| |
| __add_wait_queue(&pci_ucfg_wait, &wait); |
| do { |
| set_current_state(TASK_UNINTERRUPTIBLE); |
| spin_unlock_irq(&pci_lock); |
| schedule(); |
| spin_lock_irq(&pci_lock); |
| } while (dev->block_ucfg_access); |
| __remove_wait_queue(&pci_ucfg_wait, &wait); |
| } |
| |
| #define PCI_USER_READ_CONFIG(size,type) \ |
| int pci_user_read_config_##size \ |
| (struct pci_dev *dev, int pos, type *val) \ |
| { \ |
| int ret = 0; \ |
| u32 data = -1; \ |
| if (PCI_##size##_BAD) return PCIBIOS_BAD_REGISTER_NUMBER; \ |
| spin_lock_irq(&pci_lock); \ |
| if (unlikely(dev->block_ucfg_access)) pci_wait_ucfg(dev); \ |
| ret = dev->bus->ops->read(dev->bus, dev->devfn, \ |
| pos, sizeof(type), &data); \ |
| spin_unlock_irq(&pci_lock); \ |
| *val = (type)data; \ |
| return ret; \ |
| } |
| |
| #define PCI_USER_WRITE_CONFIG(size,type) \ |
| int pci_user_write_config_##size \ |
| (struct pci_dev *dev, int pos, type val) \ |
| { \ |
| int ret = -EIO; \ |
| if (PCI_##size##_BAD) return PCIBIOS_BAD_REGISTER_NUMBER; \ |
| spin_lock_irq(&pci_lock); \ |
| if (unlikely(dev->block_ucfg_access)) pci_wait_ucfg(dev); \ |
| ret = dev->bus->ops->write(dev->bus, dev->devfn, \ |
| pos, sizeof(type), val); \ |
| spin_unlock_irq(&pci_lock); \ |
| return ret; \ |
| } |
| |
| PCI_USER_READ_CONFIG(byte, u8) |
| PCI_USER_READ_CONFIG(word, u16) |
| PCI_USER_READ_CONFIG(dword, u32) |
| PCI_USER_WRITE_CONFIG(byte, u8) |
| PCI_USER_WRITE_CONFIG(word, u16) |
| PCI_USER_WRITE_CONFIG(dword, u32) |
| |
| /* VPD access through PCI 2.2+ VPD capability */ |
| |
| #define PCI_VPD_PCI22_SIZE (PCI_VPD_ADDR_MASK + 1) |
| |
| struct pci_vpd_pci22 { |
| struct pci_vpd base; |
| struct mutex lock; |
| u16 flag; |
| bool busy; |
| u8 cap; |
| }; |
| |
| /* |
| * Wait for last operation to complete. |
| * This code has to spin since there is no other notification from the PCI |
| * hardware. Since the VPD is often implemented by serial attachment to an |
| * EEPROM, it may take many milliseconds to complete. |
| */ |
| static int pci_vpd_pci22_wait(struct pci_dev *dev) |
| { |
| struct pci_vpd_pci22 *vpd = |
| container_of(dev->vpd, struct pci_vpd_pci22, base); |
| unsigned long timeout = jiffies + HZ/20 + 2; |
| u16 status; |
| int ret; |
| |
| if (!vpd->busy) |
| return 0; |
| |
| for (;;) { |
| ret = pci_user_read_config_word(dev, vpd->cap + PCI_VPD_ADDR, |
| &status); |
| if (ret) |
| return ret; |
| |
| if ((status & PCI_VPD_ADDR_F) == vpd->flag) { |
| vpd->busy = false; |
| return 0; |
| } |
| |
| if (time_after(jiffies, timeout)) |
| return -ETIMEDOUT; |
| if (fatal_signal_pending(current)) |
| return -EINTR; |
| if (!cond_resched()) |
| udelay(10); |
| } |
| } |
| |
| static ssize_t pci_vpd_pci22_read(struct pci_dev *dev, loff_t pos, size_t count, |
| void *arg) |
| { |
| struct pci_vpd_pci22 *vpd = |
| container_of(dev->vpd, struct pci_vpd_pci22, base); |
| int ret; |
| loff_t end = pos + count; |
| u8 *buf = arg; |
| |
| if (pos < 0 || pos > vpd->base.len || end > vpd->base.len) |
| return -EINVAL; |
| |
| if (mutex_lock_killable(&vpd->lock)) |
| return -EINTR; |
| |
| ret = pci_vpd_pci22_wait(dev); |
| if (ret < 0) |
| goto out; |
| |
| while (pos < end) { |
| u32 val; |
| unsigned int i, skip; |
| |
| ret = pci_user_write_config_word(dev, vpd->cap + PCI_VPD_ADDR, |
| pos & ~3); |
| if (ret < 0) |
| break; |
| vpd->busy = true; |
| vpd->flag = PCI_VPD_ADDR_F; |
| ret = pci_vpd_pci22_wait(dev); |
| if (ret < 0) |
| break; |
| |
| ret = pci_user_read_config_dword(dev, vpd->cap + PCI_VPD_DATA, &val); |
| if (ret < 0) |
| break; |
| |
| skip = pos & 3; |
| for (i = 0; i < sizeof(u32); i++) { |
| if (i >= skip) { |
| *buf++ = val; |
| if (++pos == end) |
| break; |
| } |
| val >>= 8; |
| } |
| } |
| out: |
| mutex_unlock(&vpd->lock); |
| return ret ? ret : count; |
| } |
| |
| static ssize_t pci_vpd_pci22_write(struct pci_dev *dev, loff_t pos, size_t count, |
| const void *arg) |
| { |
| struct pci_vpd_pci22 *vpd = |
| container_of(dev->vpd, struct pci_vpd_pci22, base); |
| const u8 *buf = arg; |
| loff_t end = pos + count; |
| int ret = 0; |
| |
| if (pos < 0 || (pos & 3) || (count & 3) || end > vpd->base.len) |
| return -EINVAL; |
| |
| if (mutex_lock_killable(&vpd->lock)) |
| return -EINTR; |
| |
| ret = pci_vpd_pci22_wait(dev); |
| if (ret < 0) |
| goto out; |
| |
| while (pos < end) { |
| u32 val; |
| |
| val = *buf++; |
| val |= *buf++ << 8; |
| val |= *buf++ << 16; |
| val |= *buf++ << 24; |
| |
| ret = pci_user_write_config_dword(dev, vpd->cap + PCI_VPD_DATA, val); |
| if (ret < 0) |
| break; |
| ret = pci_user_write_config_word(dev, vpd->cap + PCI_VPD_ADDR, |
| pos | PCI_VPD_ADDR_F); |
| if (ret < 0) |
| break; |
| |
| vpd->busy = true; |
| vpd->flag = 0; |
| ret = pci_vpd_pci22_wait(dev); |
| |
| pos += sizeof(u32); |
| } |
| out: |
| mutex_unlock(&vpd->lock); |
| return ret ? ret : count; |
| } |
| |
| static void pci_vpd_pci22_release(struct pci_dev *dev) |
| { |
| kfree(container_of(dev->vpd, struct pci_vpd_pci22, base)); |
| } |
| |
| static const struct pci_vpd_ops pci_vpd_pci22_ops = { |
| .read = pci_vpd_pci22_read, |
| .write = pci_vpd_pci22_write, |
| .release = pci_vpd_pci22_release, |
| }; |
| |
| int pci_vpd_pci22_init(struct pci_dev *dev) |
| { |
| struct pci_vpd_pci22 *vpd; |
| u8 cap; |
| |
| cap = pci_find_capability(dev, PCI_CAP_ID_VPD); |
| if (!cap) |
| return -ENODEV; |
| vpd = kzalloc(sizeof(*vpd), GFP_ATOMIC); |
| if (!vpd) |
| return -ENOMEM; |
| |
| vpd->base.len = PCI_VPD_PCI22_SIZE; |
| vpd->base.ops = &pci_vpd_pci22_ops; |
| mutex_init(&vpd->lock); |
| vpd->cap = cap; |
| vpd->busy = false; |
| dev->vpd = &vpd->base; |
| return 0; |
| } |
| |
| /** |
| * pci_vpd_truncate - Set available Vital Product Data size |
| * @dev: pci device struct |
| * @size: available memory in bytes |
| * |
| * Adjust size of available VPD area. |
| */ |
| int pci_vpd_truncate(struct pci_dev *dev, size_t size) |
| { |
| if (!dev->vpd) |
| return -EINVAL; |
| |
| /* limited by the access method */ |
| if (size > dev->vpd->len) |
| return -EINVAL; |
| |
| dev->vpd->len = size; |
| if (dev->vpd->attr) |
| dev->vpd->attr->size = size; |
| |
| return 0; |
| } |
| EXPORT_SYMBOL(pci_vpd_truncate); |
| |
| /** |
| * pci_block_user_cfg_access - Block userspace PCI config reads/writes |
| * @dev: pci device struct |
| * |
| * When user access is blocked, any reads or writes to config space will |
| * sleep until access is unblocked again. We don't allow nesting of |
| * block/unblock calls. |
| */ |
| void pci_block_user_cfg_access(struct pci_dev *dev) |
| { |
| unsigned long flags; |
| int was_blocked; |
| |
| spin_lock_irqsave(&pci_lock, flags); |
| was_blocked = dev->block_ucfg_access; |
| dev->block_ucfg_access = 1; |
| spin_unlock_irqrestore(&pci_lock, flags); |
| |
| /* If we BUG() inside the pci_lock, we're guaranteed to hose |
| * the machine */ |
| BUG_ON(was_blocked); |
| } |
| EXPORT_SYMBOL_GPL(pci_block_user_cfg_access); |
| |
| /** |
| * pci_unblock_user_cfg_access - Unblock userspace PCI config reads/writes |
| * @dev: pci device struct |
| * |
| * This function allows userspace PCI config accesses to resume. |
| */ |
| void pci_unblock_user_cfg_access(struct pci_dev *dev) |
| { |
| unsigned long flags; |
| |
| spin_lock_irqsave(&pci_lock, flags); |
| |
| /* This indicates a problem in the caller, but we don't need |
| * to kill them, unlike a double-block above. */ |
| WARN_ON(!dev->block_ucfg_access); |
| |
| dev->block_ucfg_access = 0; |
| wake_up_all(&pci_ucfg_wait); |
| spin_unlock_irqrestore(&pci_lock, flags); |
| } |
| EXPORT_SYMBOL_GPL(pci_unblock_user_cfg_access); |