blob: 6f42a18b8aa417abc5622bf9492d9a4587111738 [file] [log] [blame]
/*
* linux/arch/arm/plat-omap/devices.c
*
* Common platform device setup/initialization for OMAP1 and OMAP2
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*/
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/io.h>
#include <linux/slab.h>
#include <linux/memblock.h>
#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/mach/map.h>
#include <plat/tc.h>
#include <plat/board.h>
#include <plat/mmc.h>
#include <mach/gpio.h>
#include <plat/menelaus.h>
#include <plat/mcbsp.h>
#include <plat/omap44xx.h>
/*-------------------------------------------------------------------------*/
#if defined(CONFIG_OMAP_MCBSP) || defined(CONFIG_OMAP_MCBSP_MODULE)
static struct platform_device **omap_mcbsp_devices;
void omap_mcbsp_register_board_cfg(struct omap_mcbsp_platform_data *config,
int size)
{
int i;
omap_mcbsp_devices = kzalloc(size * sizeof(struct platform_device *),
GFP_KERNEL);
if (!omap_mcbsp_devices) {
printk(KERN_ERR "Could not register McBSP devices\n");
return;
}
for (i = 0; i < size; i++) {
struct platform_device *new_mcbsp;
int ret;
new_mcbsp = platform_device_alloc("omap-mcbsp", i + 1);
if (!new_mcbsp)
continue;
new_mcbsp->dev.platform_data = &config[i];
ret = platform_device_add(new_mcbsp);
if (ret) {
platform_device_put(new_mcbsp);
continue;
}
omap_mcbsp_devices[i] = new_mcbsp;
}
}
#else
void omap_mcbsp_register_board_cfg(struct omap_mcbsp_platform_data *config,
int size)
{ }
#endif
/*-------------------------------------------------------------------------*/
#if defined(CONFIG_SND_OMAP_SOC_MCPDM) || \
defined(CONFIG_SND_OMAP_SOC_MCPDM_MODULE)
static struct resource mcpdm_resources[] = {
{
.name = "mcpdm_mem",
.start = OMAP44XX_MCPDM_BASE,
.end = OMAP44XX_MCPDM_BASE + SZ_4K,
.flags = IORESOURCE_MEM,
},
{
.name = "mcpdm_irq",
.start = OMAP44XX_IRQ_MCPDM,
.end = OMAP44XX_IRQ_MCPDM,
.flags = IORESOURCE_IRQ,
},
};
static struct platform_device omap_mcpdm_device = {
.name = "omap-mcpdm",
.id = -1,
.num_resources = ARRAY_SIZE(mcpdm_resources),
.resource = mcpdm_resources,
};
static void omap_init_mcpdm(void)
{
(void) platform_device_register(&omap_mcpdm_device);
}
#else
static inline void omap_init_mcpdm(void) {}
#endif
/*-------------------------------------------------------------------------*/
#if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE) || \
defined(CONFIG_MMC_OMAP_HS) || defined(CONFIG_MMC_OMAP_HS_MODULE)
#define OMAP_MMC_NR_RES 2
/*
* Register MMC devices. Called from mach-omap1 and mach-omap2 device init.
*/
int __init omap_mmc_add(const char *name, int id, unsigned long base,
unsigned long size, unsigned int irq,
struct omap_mmc_platform_data *data)
{
struct platform_device *pdev;
struct resource res[OMAP_MMC_NR_RES];
int ret;
pdev = platform_device_alloc(name, id);
if (!pdev)
return -ENOMEM;
memset(res, 0, OMAP_MMC_NR_RES * sizeof(struct resource));
res[0].start = base;
res[0].end = base + size - 1;
res[0].flags = IORESOURCE_MEM;
res[1].start = res[1].end = irq;
res[1].flags = IORESOURCE_IRQ;
ret = platform_device_add_resources(pdev, res, ARRAY_SIZE(res));
if (ret == 0)
ret = platform_device_add_data(pdev, data, sizeof(*data));
if (ret)
goto fail;
ret = platform_device_add(pdev);
if (ret)
goto fail;
/* return device handle to board setup code */
data->dev = &pdev->dev;
return 0;
fail:
platform_device_put(pdev);
return ret;
}
#endif
/*-------------------------------------------------------------------------*/
#if defined(CONFIG_HW_RANDOM_OMAP) || defined(CONFIG_HW_RANDOM_OMAP_MODULE)
#ifdef CONFIG_ARCH_OMAP2
#define OMAP_RNG_BASE 0x480A0000
#else
#define OMAP_RNG_BASE 0xfffe5000
#endif
static struct resource rng_resources[] = {
{
.start = OMAP_RNG_BASE,
.end = OMAP_RNG_BASE + 0x4f,
.flags = IORESOURCE_MEM,
},
};
static struct platform_device omap_rng_device = {
.name = "omap_rng",
.id = -1,
.num_resources = ARRAY_SIZE(rng_resources),
.resource = rng_resources,
};
static void omap_init_rng(void)
{
(void) platform_device_register(&omap_rng_device);
}
#else
static inline void omap_init_rng(void) {}
#endif
/*-------------------------------------------------------------------------*/
/* Numbering for the SPI-capable controllers when used for SPI:
* spi = 1
* uwire = 2
* mmc1..2 = 3..4
* mcbsp1..3 = 5..7
*/
#if defined(CONFIG_SPI_OMAP_UWIRE) || defined(CONFIG_SPI_OMAP_UWIRE_MODULE)
#define OMAP_UWIRE_BASE 0xfffb3000
static struct resource uwire_resources[] = {
{
.start = OMAP_UWIRE_BASE,
.end = OMAP_UWIRE_BASE + 0x20,
.flags = IORESOURCE_MEM,
},
};
static struct platform_device omap_uwire_device = {
.name = "omap_uwire",
.id = -1,
.num_resources = ARRAY_SIZE(uwire_resources),
.resource = uwire_resources,
};
static void omap_init_uwire(void)
{
/* FIXME define and use a boot tag; not all boards will be hooking
* up devices to the microwire controller, and multi-board configs
* mean that CONFIG_SPI_OMAP_UWIRE may be configured anyway...
*/
/* board-specific code must configure chipselects (only a few
* are normally used) and SCLK/SDI/SDO (each has two choices).
*/
(void) platform_device_register(&omap_uwire_device);
}
#else
static inline void omap_init_uwire(void) {}
#endif
/*-------------------------------------------------------------------------*/
#if defined(CONFIG_OMAP_WATCHDOG) || defined(CONFIG_OMAP_WATCHDOG_MODULE)
static struct resource wdt_resources[] = {
{
.flags = IORESOURCE_MEM,
},
};
static struct platform_device omap_wdt_device = {
.name = "omap_wdt",
.id = -1,
.num_resources = ARRAY_SIZE(wdt_resources),
.resource = wdt_resources,
};
static void omap_init_wdt(void)
{
if (cpu_is_omap16xx())
wdt_resources[0].start = 0xfffeb000;
else if (cpu_is_omap2420())
wdt_resources[0].start = 0x48022000; /* WDT2 */
else if (cpu_is_omap2430())
wdt_resources[0].start = 0x49016000; /* WDT2 */
else if (cpu_is_omap343x())
wdt_resources[0].start = 0x48314000; /* WDT2 */
else if (cpu_is_omap44xx())
wdt_resources[0].start = 0x4a314000;
else
return;
wdt_resources[0].end = wdt_resources[0].start + 0x4f;
(void) platform_device_register(&omap_wdt_device);
}
#else
static inline void omap_init_wdt(void) {}
#endif
#if defined(CONFIG_TIDSPBRIDGE) || defined(CONFIG_TIDSPBRIDGE_MODULE)
static phys_addr_t omap_dsp_phys_mempool_base;
void __init omap_dsp_reserve_sdram_memblock(void)
{
phys_addr_t size = CONFIG_TIDSPBRIDGE_MEMPOOL_SIZE;
phys_addr_t paddr;
if (!size)
return;
paddr = __memblock_alloc_base(size, SZ_1M, MEMBLOCK_REAL_LIMIT);
if (!paddr) {
pr_err("%s: failed to reserve %x bytes\n",
__func__, size);
return;
}
omap_dsp_phys_mempool_base = paddr;
}
phys_addr_t omap_dsp_get_mempool_base(void)
{
return omap_dsp_phys_mempool_base;
}
EXPORT_SYMBOL(omap_dsp_get_mempool_base);
#endif
/*
* This gets called after board-specific INIT_MACHINE, and initializes most
* on-chip peripherals accessible on this board (except for few like USB):
*
* (a) Does any "standard config" pin muxing needed. Board-specific
* code will have muxed GPIO pins and done "nonstandard" setup;
* that code could live in the boot loader.
* (b) Populating board-specific platform_data with the data drivers
* rely on to handle wiring variations.
* (c) Creating platform devices as meaningful on this board and
* with this kernel configuration.
*
* Claiming GPIOs, and setting their direction and initial values, is the
* responsibility of the device drivers. So is responding to probe().
*
* Board-specific knowlege like creating devices or pin setup is to be
* kept out of drivers as much as possible. In particular, pin setup
* may be handled by the boot loader, and drivers should expect it will
* normally have been done by the time they're probed.
*/
static int __init omap_init_devices(void)
{
/* please keep these calls, and their implementations above,
* in alphabetical order so they're easier to sort through.
*/
omap_init_rng();
omap_init_mcpdm();
omap_init_uwire();
return 0;
}
arch_initcall(omap_init_devices);