| /* |
| * Copyright 1998-2008 VIA Technologies, Inc. All Rights Reserved. |
| * Copyright 2001-2008 S3 Graphics, Inc. All Rights Reserved. |
| |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public |
| * License as published by the Free Software Foundation; |
| * either version 2, or (at your option) any later version. |
| |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTIES OR REPRESENTATIONS; without even |
| * the implied warranty of MERCHANTABILITY or FITNESS FOR |
| * A PARTICULAR PURPOSE.See the GNU General Public License |
| * for more details. |
| |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., |
| * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. |
| */ |
| #include <linux/via-core.h> |
| #include <linux/via_i2c.h> |
| #include "global.h" |
| |
| static void tmds_register_write(int index, u8 data); |
| static int tmds_register_read(int index); |
| static int tmds_register_read_bytes(int index, u8 *buff, int buff_len); |
| static void __devinit dvi_get_panel_size_from_DDCv1( |
| struct tmds_chip_information *tmds_chip, |
| struct tmds_setting_information *tmds_setting); |
| static void __devinit dvi_get_panel_size_from_DDCv2( |
| struct tmds_chip_information *tmds_chip, |
| struct tmds_setting_information *tmds_setting); |
| static int viafb_dvi_query_EDID(void); |
| |
| static int check_tmds_chip(int device_id_subaddr, int device_id) |
| { |
| if (tmds_register_read(device_id_subaddr) == device_id) |
| return OK; |
| else |
| return FAIL; |
| } |
| |
| void __devinit viafb_init_dvi_size(struct tmds_chip_information *tmds_chip, |
| struct tmds_setting_information *tmds_setting) |
| { |
| DEBUG_MSG(KERN_INFO "viafb_init_dvi_size()\n"); |
| |
| viafb_dvi_sense(); |
| switch (viafb_dvi_query_EDID()) { |
| case 1: |
| dvi_get_panel_size_from_DDCv1(tmds_chip, tmds_setting); |
| break; |
| case 2: |
| dvi_get_panel_size_from_DDCv2(tmds_chip, tmds_setting); |
| break; |
| default: |
| printk(KERN_WARNING "viafb_init_dvi_size: DVI panel size undetected!\n"); |
| break; |
| } |
| |
| return; |
| } |
| |
| int __devinit viafb_tmds_trasmitter_identify(void) |
| { |
| unsigned char sr2a = 0, sr1e = 0, sr3e = 0; |
| |
| /* Turn on ouputting pad */ |
| switch (viaparinfo->chip_info->gfx_chip_name) { |
| case UNICHROME_K8M890: |
| /*=* DFP Low Pad on *=*/ |
| sr2a = viafb_read_reg(VIASR, SR2A); |
| viafb_write_reg_mask(SR2A, VIASR, 0x03, BIT0 + BIT1); |
| break; |
| |
| case UNICHROME_P4M900: |
| case UNICHROME_P4M890: |
| /* DFP Low Pad on */ |
| sr2a = viafb_read_reg(VIASR, SR2A); |
| viafb_write_reg_mask(SR2A, VIASR, 0x03, BIT0 + BIT1); |
| /* DVP0 Pad on */ |
| sr1e = viafb_read_reg(VIASR, SR1E); |
| viafb_write_reg_mask(SR1E, VIASR, 0xC0, BIT6 + BIT7); |
| break; |
| |
| default: |
| /* DVP0/DVP1 Pad on */ |
| sr1e = viafb_read_reg(VIASR, SR1E); |
| viafb_write_reg_mask(SR1E, VIASR, 0xF0, BIT4 + |
| BIT5 + BIT6 + BIT7); |
| /* SR3E[1]Multi-function selection: |
| 0 = Emulate I2C and DDC bus by GPIO2/3/4. */ |
| sr3e = viafb_read_reg(VIASR, SR3E); |
| viafb_write_reg_mask(SR3E, VIASR, 0x0, BIT5); |
| break; |
| } |
| |
| /* Check for VT1632: */ |
| viaparinfo->chip_info->tmds_chip_info.tmds_chip_name = VT1632_TMDS; |
| viaparinfo->chip_info-> |
| tmds_chip_info.tmds_chip_slave_addr = VT1632_TMDS_I2C_ADDR; |
| viaparinfo->chip_info->tmds_chip_info.i2c_port = VIA_PORT_31; |
| if (check_tmds_chip(VT1632_DEVICE_ID_REG, VT1632_DEVICE_ID) != FAIL) { |
| /* |
| * Currently only support 12bits,dual edge,add 24bits mode later |
| */ |
| tmds_register_write(0x08, 0x3b); |
| |
| DEBUG_MSG(KERN_INFO "\n VT1632 TMDS ! \n"); |
| DEBUG_MSG(KERN_INFO "\n %2d", |
| viaparinfo->chip_info->tmds_chip_info.tmds_chip_name); |
| DEBUG_MSG(KERN_INFO "\n %2d", |
| viaparinfo->chip_info->tmds_chip_info.i2c_port); |
| return OK; |
| } else { |
| viaparinfo->chip_info->tmds_chip_info.i2c_port = VIA_PORT_2C; |
| if (check_tmds_chip(VT1632_DEVICE_ID_REG, VT1632_DEVICE_ID) |
| != FAIL) { |
| tmds_register_write(0x08, 0x3b); |
| DEBUG_MSG(KERN_INFO "\n VT1632 TMDS ! \n"); |
| DEBUG_MSG(KERN_INFO "\n %2d", |
| viaparinfo->chip_info-> |
| tmds_chip_info.tmds_chip_name); |
| DEBUG_MSG(KERN_INFO "\n %2d", |
| viaparinfo->chip_info-> |
| tmds_chip_info.i2c_port); |
| return OK; |
| } |
| } |
| |
| viaparinfo->chip_info->tmds_chip_info.tmds_chip_name = INTEGRATED_TMDS; |
| |
| if ((viaparinfo->chip_info->gfx_chip_name == UNICHROME_CX700) && |
| ((viafb_display_hardware_layout == HW_LAYOUT_DVI_ONLY) || |
| (viafb_display_hardware_layout == HW_LAYOUT_LCD_DVI))) { |
| DEBUG_MSG(KERN_INFO "\n Integrated TMDS ! \n"); |
| return OK; |
| } |
| |
| switch (viaparinfo->chip_info->gfx_chip_name) { |
| case UNICHROME_K8M890: |
| viafb_write_reg(SR2A, VIASR, sr2a); |
| break; |
| |
| case UNICHROME_P4M900: |
| case UNICHROME_P4M890: |
| viafb_write_reg(SR2A, VIASR, sr2a); |
| viafb_write_reg(SR1E, VIASR, sr1e); |
| break; |
| |
| default: |
| viafb_write_reg(SR1E, VIASR, sr1e); |
| viafb_write_reg(SR3E, VIASR, sr3e); |
| break; |
| } |
| |
| viaparinfo->chip_info-> |
| tmds_chip_info.tmds_chip_name = NON_TMDS_TRANSMITTER; |
| viaparinfo->chip_info->tmds_chip_info. |
| tmds_chip_slave_addr = VT1632_TMDS_I2C_ADDR; |
| return FAIL; |
| } |
| |
| static void tmds_register_write(int index, u8 data) |
| { |
| viafb_i2c_writebyte(viaparinfo->chip_info->tmds_chip_info.i2c_port, |
| viaparinfo->chip_info->tmds_chip_info.tmds_chip_slave_addr, |
| index, data); |
| } |
| |
| static int tmds_register_read(int index) |
| { |
| u8 data; |
| |
| viafb_i2c_readbyte(viaparinfo->chip_info->tmds_chip_info.i2c_port, |
| (u8) viaparinfo->chip_info->tmds_chip_info.tmds_chip_slave_addr, |
| (u8) index, &data); |
| return data; |
| } |
| |
| static int tmds_register_read_bytes(int index, u8 *buff, int buff_len) |
| { |
| viafb_i2c_readbytes(viaparinfo->chip_info->tmds_chip_info.i2c_port, |
| (u8) viaparinfo->chip_info->tmds_chip_info.tmds_chip_slave_addr, |
| (u8) index, buff, buff_len); |
| return 0; |
| } |
| |
| /* DVI Set Mode */ |
| void viafb_dvi_set_mode(struct VideoModeTable *mode, int mode_bpp, |
| int set_iga) |
| { |
| struct VideoModeTable *rb_mode; |
| struct crt_mode_table *pDviTiming; |
| unsigned long desirePixelClock, maxPixelClock; |
| pDviTiming = mode->crtc; |
| desirePixelClock = pDviTiming->clk / 1000000; |
| maxPixelClock = (unsigned long)viaparinfo-> |
| tmds_setting_info->max_pixel_clock; |
| |
| DEBUG_MSG(KERN_INFO "\nDVI_set_mode!!\n"); |
| |
| if ((maxPixelClock != 0) && (desirePixelClock > maxPixelClock)) { |
| rb_mode = viafb_get_rb_mode(mode->crtc[0].crtc.hor_addr, |
| mode->crtc[0].crtc.ver_addr); |
| if (rb_mode) { |
| mode = rb_mode; |
| pDviTiming = rb_mode->crtc; |
| } |
| } |
| viafb_fill_crtc_timing(pDviTiming, mode, mode_bpp / 8, set_iga); |
| } |
| |
| /* Sense DVI Connector */ |
| int viafb_dvi_sense(void) |
| { |
| u8 RegSR1E = 0, RegSR3E = 0, RegCR6B = 0, RegCR91 = 0, |
| RegCR93 = 0, RegCR9B = 0, data; |
| int ret = false; |
| |
| DEBUG_MSG(KERN_INFO "viafb_dvi_sense!!\n"); |
| |
| if (viaparinfo->chip_info->gfx_chip_name == UNICHROME_CLE266) { |
| /* DI1 Pad on */ |
| RegSR1E = viafb_read_reg(VIASR, SR1E); |
| viafb_write_reg(SR1E, VIASR, RegSR1E | 0x30); |
| |
| /* CR6B[0]VCK Input Selection: 1 = External clock. */ |
| RegCR6B = viafb_read_reg(VIACR, CR6B); |
| viafb_write_reg(CR6B, VIACR, RegCR6B | 0x08); |
| |
| /* CR91[4] VDD On [3] Data On [2] VEE On [1] Back Light Off |
| [0] Software Control Power Sequence */ |
| RegCR91 = viafb_read_reg(VIACR, CR91); |
| viafb_write_reg(CR91, VIACR, 0x1D); |
| |
| /* CR93[7] DI1 Data Source Selection: 1 = DSP2. |
| CR93[5] DI1 Clock Source: 1 = internal. |
| CR93[4] DI1 Clock Polarity. |
| CR93[3:1] DI1 Clock Adjust. CR93[0] DI1 enable */ |
| RegCR93 = viafb_read_reg(VIACR, CR93); |
| viafb_write_reg(CR93, VIACR, 0x01); |
| } else { |
| /* DVP0/DVP1 Pad on */ |
| RegSR1E = viafb_read_reg(VIASR, SR1E); |
| viafb_write_reg(SR1E, VIASR, RegSR1E | 0xF0); |
| |
| /* SR3E[1]Multi-function selection: |
| 0 = Emulate I2C and DDC bus by GPIO2/3/4. */ |
| RegSR3E = viafb_read_reg(VIASR, SR3E); |
| viafb_write_reg(SR3E, VIASR, RegSR3E & (~0x20)); |
| |
| /* CR91[4] VDD On [3] Data On [2] VEE On [1] Back Light Off |
| [0] Software Control Power Sequence */ |
| RegCR91 = viafb_read_reg(VIACR, CR91); |
| viafb_write_reg(CR91, VIACR, 0x1D); |
| |
| /*CR9B[4] DVP1 Data Source Selection: 1 = From secondary |
| display.CR9B[2:0] DVP1 Clock Adjust */ |
| RegCR9B = viafb_read_reg(VIACR, CR9B); |
| viafb_write_reg(CR9B, VIACR, 0x01); |
| } |
| |
| data = (u8) tmds_register_read(0x09); |
| if (data & 0x04) |
| ret = true; |
| |
| if (ret == false) { |
| if (viafb_dvi_query_EDID()) |
| ret = true; |
| } |
| |
| /* Restore status */ |
| viafb_write_reg(SR1E, VIASR, RegSR1E); |
| viafb_write_reg(CR91, VIACR, RegCR91); |
| if (viaparinfo->chip_info->gfx_chip_name == UNICHROME_CLE266) { |
| viafb_write_reg(CR6B, VIACR, RegCR6B); |
| viafb_write_reg(CR93, VIACR, RegCR93); |
| } else { |
| viafb_write_reg(SR3E, VIASR, RegSR3E); |
| viafb_write_reg(CR9B, VIACR, RegCR9B); |
| } |
| |
| return ret; |
| } |
| |
| /* Query Flat Panel's EDID Table Version Through DVI Connector */ |
| static int viafb_dvi_query_EDID(void) |
| { |
| u8 data0, data1; |
| int restore; |
| |
| DEBUG_MSG(KERN_INFO "viafb_dvi_query_EDID!!\n"); |
| |
| restore = viaparinfo->chip_info->tmds_chip_info.tmds_chip_slave_addr; |
| viaparinfo->chip_info->tmds_chip_info.tmds_chip_slave_addr = 0xA0; |
| |
| data0 = (u8) tmds_register_read(0x00); |
| data1 = (u8) tmds_register_read(0x01); |
| if ((data0 == 0) && (data1 == 0xFF)) { |
| viaparinfo->chip_info-> |
| tmds_chip_info.tmds_chip_slave_addr = restore; |
| return EDID_VERSION_1; /* Found EDID1 Table */ |
| } |
| |
| data0 = (u8) tmds_register_read(0x00); |
| viaparinfo->chip_info->tmds_chip_info.tmds_chip_slave_addr = restore; |
| if (data0 == 0x20) |
| return EDID_VERSION_2; /* Found EDID2 Table */ |
| else |
| return false; |
| } |
| |
| /* Get Panel Size Using EDID1 Table */ |
| static void __devinit dvi_get_panel_size_from_DDCv1( |
| struct tmds_chip_information *tmds_chip, |
| struct tmds_setting_information *tmds_setting) |
| { |
| int i, max_h = 0, tmp, restore; |
| unsigned char rData; |
| unsigned char EDID_DATA[18]; |
| |
| DEBUG_MSG(KERN_INFO "\n dvi_get_panel_size_from_DDCv1 \n"); |
| |
| restore = tmds_chip->tmds_chip_slave_addr; |
| tmds_chip->tmds_chip_slave_addr = 0xA0; |
| |
| rData = tmds_register_read(0x23); |
| if (rData & 0x3C) |
| max_h = 640; |
| if (rData & 0xC0) |
| max_h = 720; |
| if (rData & 0x03) |
| max_h = 800; |
| |
| rData = tmds_register_read(0x24); |
| if (rData & 0xC0) |
| max_h = 800; |
| if (rData & 0x1E) |
| max_h = 1024; |
| if (rData & 0x01) |
| max_h = 1280; |
| |
| for (i = 0x25; i < 0x6D; i++) { |
| switch (i) { |
| case 0x26: |
| case 0x28: |
| case 0x2A: |
| case 0x2C: |
| case 0x2E: |
| case 0x30: |
| case 0x32: |
| case 0x34: |
| rData = tmds_register_read(i); |
| if (rData == 1) |
| break; |
| /* data = (data + 31) * 8 */ |
| tmp = (rData + 31) << 3; |
| if (tmp > max_h) |
| max_h = tmp; |
| break; |
| |
| case 0x36: |
| case 0x48: |
| case 0x5A: |
| case 0x6C: |
| tmds_register_read_bytes(i, EDID_DATA, 10); |
| if (!(EDID_DATA[0] || EDID_DATA[1])) { |
| /* The first two byte must be zero. */ |
| if (EDID_DATA[3] == 0xFD) { |
| /* To get max pixel clock. */ |
| tmds_setting->max_pixel_clock = |
| EDID_DATA[9] * 10; |
| } |
| } |
| break; |
| |
| default: |
| break; |
| } |
| } |
| |
| tmds_setting->max_hres = max_h; |
| switch (max_h) { |
| case 640: |
| tmds_setting->max_vres = 480; |
| break; |
| case 800: |
| tmds_setting->max_vres = 600; |
| break; |
| case 1024: |
| tmds_setting->max_vres = 768; |
| break; |
| case 1280: |
| tmds_setting->max_vres = 1024; |
| break; |
| case 1400: |
| tmds_setting->max_vres = 1050; |
| break; |
| case 1440: |
| tmds_setting->max_vres = 1050; |
| break; |
| case 1600: |
| tmds_setting->max_vres = 1200; |
| break; |
| case 1920: |
| tmds_setting->max_vres = 1080; |
| break; |
| default: |
| DEBUG_MSG(KERN_INFO "Unknown panel size max resolution = %d ! " |
| "set default panel size.\n", max_h); |
| break; |
| } |
| |
| DEBUG_MSG(KERN_INFO "DVI max pixelclock = %d\n", |
| tmds_setting->max_pixel_clock); |
| tmds_chip->tmds_chip_slave_addr = restore; |
| } |
| |
| /* Get Panel Size Using EDID2 Table */ |
| static void __devinit dvi_get_panel_size_from_DDCv2( |
| struct tmds_chip_information *tmds_chip, |
| struct tmds_setting_information *tmds_setting) |
| { |
| int restore; |
| unsigned char R_Buffer[2]; |
| |
| DEBUG_MSG(KERN_INFO "\n dvi_get_panel_size_from_DDCv2 \n"); |
| |
| restore = tmds_chip->tmds_chip_slave_addr; |
| tmds_chip->tmds_chip_slave_addr = 0xA2; |
| |
| /* Horizontal: 0x76, 0x77 */ |
| tmds_register_read_bytes(0x76, R_Buffer, 2); |
| tmds_setting->max_hres = R_Buffer[0] + (R_Buffer[1] << 8); |
| |
| switch (tmds_setting->max_hres) { |
| case 640: |
| tmds_setting->max_vres = 480; |
| break; |
| case 800: |
| tmds_setting->max_vres = 600; |
| break; |
| case 1024: |
| tmds_setting->max_vres = 768; |
| break; |
| case 1280: |
| tmds_setting->max_vres = 1024; |
| break; |
| case 1400: |
| tmds_setting->max_vres = 1050; |
| break; |
| case 1440: |
| tmds_setting->max_vres = 1050; |
| break; |
| case 1600: |
| tmds_setting->max_vres = 1200; |
| break; |
| default: |
| DEBUG_MSG(KERN_INFO "Unknown panel size max resolution = %d! " |
| "set default panel size.\n", tmds_setting->max_hres); |
| break; |
| } |
| |
| tmds_chip->tmds_chip_slave_addr = restore; |
| } |
| |
| /* If Disable DVI, turn off pad */ |
| void viafb_dvi_disable(void) |
| { |
| if (viaparinfo->chip_info-> |
| tmds_chip_info.output_interface == INTERFACE_TMDS) |
| /* Turn off TMDS power. */ |
| viafb_write_reg(CRD2, VIACR, |
| viafb_read_reg(VIACR, CRD2) | 0x08); |
| } |
| |
| static void dvi_patch_skew_dvp0(void) |
| { |
| /* Reset data driving first: */ |
| viafb_write_reg_mask(SR1B, VIASR, 0, BIT1); |
| viafb_write_reg_mask(SR2A, VIASR, 0, BIT4); |
| |
| switch (viaparinfo->chip_info->gfx_chip_name) { |
| case UNICHROME_P4M890: |
| { |
| if ((viaparinfo->tmds_setting_info->h_active == 1600) && |
| (viaparinfo->tmds_setting_info->v_active == |
| 1200)) |
| viafb_write_reg_mask(CR96, VIACR, 0x03, |
| BIT0 + BIT1 + BIT2); |
| else |
| viafb_write_reg_mask(CR96, VIACR, 0x07, |
| BIT0 + BIT1 + BIT2); |
| break; |
| } |
| |
| case UNICHROME_P4M900: |
| { |
| viafb_write_reg_mask(CR96, VIACR, 0x07, |
| BIT0 + BIT1 + BIT2 + BIT3); |
| viafb_write_reg_mask(SR1B, VIASR, 0x02, BIT1); |
| viafb_write_reg_mask(SR2A, VIASR, 0x10, BIT4); |
| break; |
| } |
| |
| default: |
| { |
| break; |
| } |
| } |
| } |
| |
| static void dvi_patch_skew_dvp_low(void) |
| { |
| switch (viaparinfo->chip_info->gfx_chip_name) { |
| case UNICHROME_K8M890: |
| { |
| viafb_write_reg_mask(CR99, VIACR, 0x03, BIT0 + BIT1); |
| break; |
| } |
| |
| case UNICHROME_P4M900: |
| { |
| viafb_write_reg_mask(CR99, VIACR, 0x08, |
| BIT0 + BIT1 + BIT2 + BIT3); |
| break; |
| } |
| |
| case UNICHROME_P4M890: |
| { |
| viafb_write_reg_mask(CR99, VIACR, 0x0F, |
| BIT0 + BIT1 + BIT2 + BIT3); |
| break; |
| } |
| |
| default: |
| { |
| break; |
| } |
| } |
| } |
| |
| /* If Enable DVI, turn off pad */ |
| void viafb_dvi_enable(void) |
| { |
| u8 data; |
| |
| switch (viaparinfo->chip_info->tmds_chip_info.output_interface) { |
| case INTERFACE_DVP0: |
| viafb_write_reg_mask(CR6B, VIACR, 0x01, BIT0); |
| viafb_write_reg_mask(CR6C, VIACR, 0x21, BIT0 + BIT5); |
| dvi_patch_skew_dvp0(); |
| if (viaparinfo->chip_info->gfx_chip_name == UNICHROME_CLE266) |
| tmds_register_write(0x88, 0x3b); |
| else |
| /*clear CR91[5] to direct on display period |
| in the secondary diplay path */ |
| via_write_reg_mask(VIACR, 0x91, 0x00, 0x20); |
| break; |
| |
| case INTERFACE_DVP1: |
| if (viaparinfo->chip_info->gfx_chip_name == UNICHROME_CLE266) |
| viafb_write_reg_mask(CR93, VIACR, 0x21, BIT0 + BIT5); |
| |
| /*fix dvi cann't be enabled with MB VT5718C4 - Al Zhang */ |
| if (viaparinfo->chip_info->gfx_chip_name == UNICHROME_CLE266) |
| tmds_register_write(0x88, 0x3b); |
| else |
| /*clear CR91[5] to direct on display period |
| in the secondary diplay path */ |
| via_write_reg_mask(VIACR, 0x91, 0x00, 0x20); |
| |
| /*fix DVI cannot enable on EPIA-M board */ |
| if (viafb_platform_epia_dvi == 1) { |
| viafb_write_reg_mask(CR91, VIACR, 0x1f, 0x1f); |
| viafb_write_reg_mask(CR88, VIACR, 0x00, BIT6 + BIT0); |
| if (viafb_bus_width == 24) { |
| if (viafb_device_lcd_dualedge == 1) |
| data = 0x3F; |
| else |
| data = 0x37; |
| viafb_i2c_writebyte(viaparinfo->chip_info-> |
| tmds_chip_info.i2c_port, |
| viaparinfo->chip_info-> |
| tmds_chip_info.tmds_chip_slave_addr, |
| 0x08, data); |
| } |
| } |
| break; |
| |
| case INTERFACE_DFP_HIGH: |
| if (viaparinfo->chip_info->gfx_chip_name != UNICHROME_CLE266) |
| via_write_reg_mask(VIACR, CR97, 0x03, 0x03); |
| |
| via_write_reg_mask(VIACR, 0x91, 0x00, 0x20); |
| break; |
| |
| case INTERFACE_DFP_LOW: |
| if (viaparinfo->chip_info->gfx_chip_name == UNICHROME_CLE266) |
| break; |
| |
| dvi_patch_skew_dvp_low(); |
| via_write_reg_mask(VIACR, 0x91, 0x00, 0x20); |
| break; |
| |
| case INTERFACE_TMDS: |
| /* Turn on Display period in the panel path. */ |
| viafb_write_reg_mask(CR91, VIACR, 0, BIT7); |
| |
| /* Turn on TMDS power. */ |
| viafb_write_reg_mask(CRD2, VIACR, 0, BIT3); |
| break; |
| } |
| |
| if (viaparinfo->tmds_setting_info->iga_path == IGA2) { |
| /* Disable LCD Scaling */ |
| viafb_write_reg_mask(CR79, VIACR, 0x00, BIT0); |
| } |
| } |