| /*****************************************************************************/ |
| |
| /* |
| * uss720.c -- USS720 USB Parport Cable. |
| * |
| * Copyright (C) 1999, 2005, 2010 |
| * Thomas Sailer (t.sailer@alumni.ethz.ch) |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. |
| * |
| * Based on parport_pc.c |
| * |
| * History: |
| * 0.1 04.08.1999 Created |
| * 0.2 07.08.1999 Some fixes mainly suggested by Tim Waugh |
| * Interrupt handling currently disabled because |
| * usb_request_irq crashes somewhere within ohci.c |
| * for no apparent reason (that is for me, anyway) |
| * ECP currently untested |
| * 0.3 10.08.1999 fixing merge errors |
| * 0.4 13.08.1999 Added Vendor/Product ID of Brad Hard's cable |
| * 0.5 20.09.1999 usb_control_msg wrapper used |
| * Nov01.2000 usb_device_table support by Adam J. Richter |
| * 08.04.2001 Identify version on module load. gb |
| * 0.6 02.09.2005 Fix "scheduling in interrupt" problem by making save/restore |
| * context asynchronous |
| * |
| */ |
| |
| /*****************************************************************************/ |
| |
| #include <linux/module.h> |
| #include <linux/socket.h> |
| #include <linux/parport.h> |
| #include <linux/init.h> |
| #include <linux/usb.h> |
| #include <linux/delay.h> |
| #include <linux/completion.h> |
| #include <linux/kref.h> |
| #include <linux/slab.h> |
| |
| /* |
| * Version Information |
| */ |
| #define DRIVER_VERSION "v0.6" |
| #define DRIVER_AUTHOR "Thomas M. Sailer, t.sailer@alumni.ethz.ch" |
| #define DRIVER_DESC "USB Parport Cable driver for Cables using the Lucent Technologies USS720 Chip" |
| |
| /* --------------------------------------------------------------------- */ |
| |
| struct parport_uss720_private { |
| struct usb_device *usbdev; |
| struct parport *pp; |
| struct kref ref_count; |
| __u8 reg[7]; /* USB registers */ |
| struct list_head asynclist; |
| spinlock_t asynclock; |
| }; |
| |
| struct uss720_async_request { |
| struct parport_uss720_private *priv; |
| struct kref ref_count; |
| struct list_head asynclist; |
| struct completion compl; |
| struct urb *urb; |
| struct usb_ctrlrequest dr; |
| __u8 reg[7]; |
| }; |
| |
| /* --------------------------------------------------------------------- */ |
| |
| static void destroy_priv(struct kref *kref) |
| { |
| struct parport_uss720_private *priv = container_of(kref, struct parport_uss720_private, ref_count); |
| |
| dev_dbg(&priv->usbdev->dev, "destroying priv datastructure\n"); |
| usb_put_dev(priv->usbdev); |
| kfree(priv); |
| } |
| |
| static void destroy_async(struct kref *kref) |
| { |
| struct uss720_async_request *rq = container_of(kref, struct uss720_async_request, ref_count); |
| struct parport_uss720_private *priv = rq->priv; |
| unsigned long flags; |
| |
| if (likely(rq->urb)) |
| usb_free_urb(rq->urb); |
| spin_lock_irqsave(&priv->asynclock, flags); |
| list_del_init(&rq->asynclist); |
| spin_unlock_irqrestore(&priv->asynclock, flags); |
| kfree(rq); |
| kref_put(&priv->ref_count, destroy_priv); |
| } |
| |
| /* --------------------------------------------------------------------- */ |
| |
| static void async_complete(struct urb *urb) |
| { |
| struct uss720_async_request *rq; |
| struct parport *pp; |
| struct parport_uss720_private *priv; |
| int status = urb->status; |
| |
| rq = urb->context; |
| priv = rq->priv; |
| pp = priv->pp; |
| if (status) { |
| dev_err(&urb->dev->dev, "async_complete: urb error %d\n", |
| status); |
| } else if (rq->dr.bRequest == 3) { |
| memcpy(priv->reg, rq->reg, sizeof(priv->reg)); |
| #if 0 |
| dev_dbg(&priv->usbdev->dev, |
| "async_complete regs %02x %02x %02x %02x %02x %02x %02x\n", |
| (unsigned int)priv->reg[0], (unsigned int)priv->reg[1], |
| (unsigned int)priv->reg[2], (unsigned int)priv->reg[3], |
| (unsigned int)priv->reg[4], (unsigned int)priv->reg[5], |
| (unsigned int)priv->reg[6]); |
| #endif |
| /* if nAck interrupts are enabled and we have an interrupt, call the interrupt procedure */ |
| if (rq->reg[2] & rq->reg[1] & 0x10 && pp) |
| parport_generic_irq(pp); |
| } |
| complete(&rq->compl); |
| kref_put(&rq->ref_count, destroy_async); |
| } |
| |
| static struct uss720_async_request *submit_async_request(struct parport_uss720_private *priv, |
| __u8 request, __u8 requesttype, __u16 value, __u16 index, |
| gfp_t mem_flags) |
| { |
| struct usb_device *usbdev; |
| struct uss720_async_request *rq; |
| unsigned long flags; |
| int ret; |
| |
| if (!priv) |
| return NULL; |
| usbdev = priv->usbdev; |
| if (!usbdev) |
| return NULL; |
| rq = kmalloc(sizeof(struct uss720_async_request), mem_flags); |
| if (!rq) { |
| dev_err(&usbdev->dev, "submit_async_request out of memory\n"); |
| return NULL; |
| } |
| kref_init(&rq->ref_count); |
| INIT_LIST_HEAD(&rq->asynclist); |
| init_completion(&rq->compl); |
| kref_get(&priv->ref_count); |
| rq->priv = priv; |
| rq->urb = usb_alloc_urb(0, mem_flags); |
| if (!rq->urb) { |
| kref_put(&rq->ref_count, destroy_async); |
| dev_err(&usbdev->dev, "submit_async_request out of memory\n"); |
| return NULL; |
| } |
| rq->dr.bRequestType = requesttype; |
| rq->dr.bRequest = request; |
| rq->dr.wValue = cpu_to_le16(value); |
| rq->dr.wIndex = cpu_to_le16(index); |
| rq->dr.wLength = cpu_to_le16((request == 3) ? sizeof(rq->reg) : 0); |
| usb_fill_control_urb(rq->urb, usbdev, (requesttype & 0x80) ? usb_rcvctrlpipe(usbdev, 0) : usb_sndctrlpipe(usbdev, 0), |
| (unsigned char *)&rq->dr, |
| (request == 3) ? rq->reg : NULL, (request == 3) ? sizeof(rq->reg) : 0, async_complete, rq); |
| /* rq->urb->transfer_flags |= URB_ASYNC_UNLINK; */ |
| spin_lock_irqsave(&priv->asynclock, flags); |
| list_add_tail(&rq->asynclist, &priv->asynclist); |
| spin_unlock_irqrestore(&priv->asynclock, flags); |
| kref_get(&rq->ref_count); |
| ret = usb_submit_urb(rq->urb, mem_flags); |
| if (!ret) |
| return rq; |
| destroy_async(&rq->ref_count); |
| dev_err(&usbdev->dev, "submit_async_request submit_urb failed with %d\n", ret); |
| return NULL; |
| } |
| |
| static unsigned int kill_all_async_requests_priv(struct parport_uss720_private *priv) |
| { |
| struct uss720_async_request *rq; |
| unsigned long flags; |
| unsigned int ret = 0; |
| |
| spin_lock_irqsave(&priv->asynclock, flags); |
| list_for_each_entry(rq, &priv->asynclist, asynclist) { |
| usb_unlink_urb(rq->urb); |
| ret++; |
| } |
| spin_unlock_irqrestore(&priv->asynclock, flags); |
| return ret; |
| } |
| |
| /* --------------------------------------------------------------------- */ |
| |
| static int get_1284_register(struct parport *pp, unsigned char reg, unsigned char *val, gfp_t mem_flags) |
| { |
| struct parport_uss720_private *priv; |
| struct uss720_async_request *rq; |
| static const unsigned char regindex[9] = { |
| 4, 0, 1, 5, 5, 0, 2, 3, 6 |
| }; |
| int ret; |
| |
| if (!pp) |
| return -EIO; |
| priv = pp->private_data; |
| rq = submit_async_request(priv, 3, 0xc0, ((unsigned int)reg) << 8, 0, mem_flags); |
| if (!rq) { |
| dev_err(&priv->usbdev->dev, "get_1284_register(%u) failed", |
| (unsigned int)reg); |
| return -EIO; |
| } |
| if (!val) { |
| kref_put(&rq->ref_count, destroy_async); |
| return 0; |
| } |
| if (wait_for_completion_timeout(&rq->compl, HZ)) { |
| ret = rq->urb->status; |
| *val = priv->reg[(reg >= 9) ? 0 : regindex[reg]]; |
| if (ret) |
| printk(KERN_WARNING "get_1284_register: " |
| "usb error %d\n", ret); |
| kref_put(&rq->ref_count, destroy_async); |
| return ret; |
| } |
| printk(KERN_WARNING "get_1284_register timeout\n"); |
| kill_all_async_requests_priv(priv); |
| return -EIO; |
| } |
| |
| static int set_1284_register(struct parport *pp, unsigned char reg, unsigned char val, gfp_t mem_flags) |
| { |
| struct parport_uss720_private *priv; |
| struct uss720_async_request *rq; |
| |
| if (!pp) |
| return -EIO; |
| priv = pp->private_data; |
| rq = submit_async_request(priv, 4, 0x40, (((unsigned int)reg) << 8) | val, 0, mem_flags); |
| if (!rq) { |
| dev_err(&priv->usbdev->dev, "set_1284_register(%u,%u) failed", |
| (unsigned int)reg, (unsigned int)val); |
| return -EIO; |
| } |
| kref_put(&rq->ref_count, destroy_async); |
| return 0; |
| } |
| |
| /* --------------------------------------------------------------------- */ |
| |
| /* ECR modes */ |
| #define ECR_SPP 00 |
| #define ECR_PS2 01 |
| #define ECR_PPF 02 |
| #define ECR_ECP 03 |
| #define ECR_EPP 04 |
| |
| /* Safely change the mode bits in the ECR */ |
| static int change_mode(struct parport *pp, int m) |
| { |
| struct parport_uss720_private *priv = pp->private_data; |
| int mode; |
| __u8 reg; |
| |
| if (get_1284_register(pp, 6, ®, GFP_KERNEL)) |
| return -EIO; |
| /* Bits <7:5> contain the mode. */ |
| mode = (priv->reg[2] >> 5) & 0x7; |
| if (mode == m) |
| return 0; |
| /* We have to go through mode 000 or 001 */ |
| if (mode > ECR_PS2 && m > ECR_PS2) |
| if (change_mode(pp, ECR_PS2)) |
| return -EIO; |
| |
| if (m <= ECR_PS2 && !(priv->reg[1] & 0x20)) { |
| /* This mode resets the FIFO, so we may |
| * have to wait for it to drain first. */ |
| unsigned long expire = jiffies + pp->physport->cad->timeout; |
| switch (mode) { |
| case ECR_PPF: /* Parallel Port FIFO mode */ |
| case ECR_ECP: /* ECP Parallel Port mode */ |
| /* Poll slowly. */ |
| for (;;) { |
| if (get_1284_register(pp, 6, ®, GFP_KERNEL)) |
| return -EIO; |
| if (priv->reg[2] & 0x01) |
| break; |
| if (time_after_eq (jiffies, expire)) |
| /* The FIFO is stuck. */ |
| return -EBUSY; |
| msleep_interruptible(10); |
| if (signal_pending (current)) |
| break; |
| } |
| } |
| } |
| /* Set the mode. */ |
| if (set_1284_register(pp, 6, m << 5, GFP_KERNEL)) |
| return -EIO; |
| if (get_1284_register(pp, 6, ®, GFP_KERNEL)) |
| return -EIO; |
| return 0; |
| } |
| |
| /* |
| * Clear TIMEOUT BIT in EPP MODE |
| */ |
| static int clear_epp_timeout(struct parport *pp) |
| { |
| unsigned char stat; |
| |
| if (get_1284_register(pp, 1, &stat, GFP_KERNEL)) |
| return 1; |
| return stat & 1; |
| } |
| |
| /* |
| * Access functions. |
| */ |
| #if 0 |
| static int uss720_irq(int usbstatus, void *buffer, int len, void *dev_id) |
| { |
| struct parport *pp = (struct parport *)dev_id; |
| struct parport_uss720_private *priv = pp->private_data; |
| |
| if (usbstatus != 0 || len < 4 || !buffer) |
| return 1; |
| memcpy(priv->reg, buffer, 4); |
| /* if nAck interrupts are enabled and we have an interrupt, call the interrupt procedure */ |
| if (priv->reg[2] & priv->reg[1] & 0x10) |
| parport_generic_irq(pp); |
| return 1; |
| } |
| #endif |
| |
| static void parport_uss720_write_data(struct parport *pp, unsigned char d) |
| { |
| set_1284_register(pp, 0, d, GFP_KERNEL); |
| } |
| |
| static unsigned char parport_uss720_read_data(struct parport *pp) |
| { |
| unsigned char ret; |
| |
| if (get_1284_register(pp, 0, &ret, GFP_KERNEL)) |
| return 0; |
| return ret; |
| } |
| |
| static void parport_uss720_write_control(struct parport *pp, unsigned char d) |
| { |
| struct parport_uss720_private *priv = pp->private_data; |
| |
| d = (d & 0xf) | (priv->reg[1] & 0xf0); |
| if (set_1284_register(pp, 2, d, GFP_KERNEL)) |
| return; |
| priv->reg[1] = d; |
| } |
| |
| static unsigned char parport_uss720_read_control(struct parport *pp) |
| { |
| struct parport_uss720_private *priv = pp->private_data; |
| return priv->reg[1] & 0xf; /* Use soft copy */ |
| } |
| |
| static unsigned char parport_uss720_frob_control(struct parport *pp, unsigned char mask, unsigned char val) |
| { |
| struct parport_uss720_private *priv = pp->private_data; |
| unsigned char d; |
| |
| mask &= 0x0f; |
| val &= 0x0f; |
| d = (priv->reg[1] & (~mask)) ^ val; |
| if (set_1284_register(pp, 2, d, GFP_KERNEL)) |
| return 0; |
| priv->reg[1] = d; |
| return d & 0xf; |
| } |
| |
| static unsigned char parport_uss720_read_status(struct parport *pp) |
| { |
| unsigned char ret; |
| |
| if (get_1284_register(pp, 1, &ret, GFP_KERNEL)) |
| return 0; |
| return ret & 0xf8; |
| } |
| |
| static void parport_uss720_disable_irq(struct parport *pp) |
| { |
| struct parport_uss720_private *priv = pp->private_data; |
| unsigned char d; |
| |
| d = priv->reg[1] & ~0x10; |
| if (set_1284_register(pp, 2, d, GFP_KERNEL)) |
| return; |
| priv->reg[1] = d; |
| } |
| |
| static void parport_uss720_enable_irq(struct parport *pp) |
| { |
| struct parport_uss720_private *priv = pp->private_data; |
| unsigned char d; |
| |
| d = priv->reg[1] | 0x10; |
| if (set_1284_register(pp, 2, d, GFP_KERNEL)) |
| return; |
| priv->reg[1] = d; |
| } |
| |
| static void parport_uss720_data_forward (struct parport *pp) |
| { |
| struct parport_uss720_private *priv = pp->private_data; |
| unsigned char d; |
| |
| d = priv->reg[1] & ~0x20; |
| if (set_1284_register(pp, 2, d, GFP_KERNEL)) |
| return; |
| priv->reg[1] = d; |
| } |
| |
| static void parport_uss720_data_reverse (struct parport *pp) |
| { |
| struct parport_uss720_private *priv = pp->private_data; |
| unsigned char d; |
| |
| d = priv->reg[1] | 0x20; |
| if (set_1284_register(pp, 2, d, GFP_KERNEL)) |
| return; |
| priv->reg[1] = d; |
| } |
| |
| static void parport_uss720_init_state(struct pardevice *dev, struct parport_state *s) |
| { |
| s->u.pc.ctr = 0xc | (dev->irq_func ? 0x10 : 0x0); |
| s->u.pc.ecr = 0x24; |
| } |
| |
| static void parport_uss720_save_state(struct parport *pp, struct parport_state *s) |
| { |
| struct parport_uss720_private *priv = pp->private_data; |
| |
| #if 0 |
| if (get_1284_register(pp, 2, NULL, GFP_ATOMIC)) |
| return; |
| #endif |
| s->u.pc.ctr = priv->reg[1]; |
| s->u.pc.ecr = priv->reg[2]; |
| } |
| |
| static void parport_uss720_restore_state(struct parport *pp, struct parport_state *s) |
| { |
| struct parport_uss720_private *priv = pp->private_data; |
| |
| set_1284_register(pp, 2, s->u.pc.ctr, GFP_ATOMIC); |
| set_1284_register(pp, 6, s->u.pc.ecr, GFP_ATOMIC); |
| get_1284_register(pp, 2, NULL, GFP_ATOMIC); |
| priv->reg[1] = s->u.pc.ctr; |
| priv->reg[2] = s->u.pc.ecr; |
| } |
| |
| static size_t parport_uss720_epp_read_data(struct parport *pp, void *buf, size_t length, int flags) |
| { |
| struct parport_uss720_private *priv = pp->private_data; |
| size_t got = 0; |
| |
| if (change_mode(pp, ECR_EPP)) |
| return 0; |
| for (; got < length; got++) { |
| if (get_1284_register(pp, 4, (char *)buf, GFP_KERNEL)) |
| break; |
| buf++; |
| if (priv->reg[0] & 0x01) { |
| clear_epp_timeout(pp); |
| break; |
| } |
| } |
| change_mode(pp, ECR_PS2); |
| return got; |
| } |
| |
| static size_t parport_uss720_epp_write_data(struct parport *pp, const void *buf, size_t length, int flags) |
| { |
| #if 0 |
| struct parport_uss720_private *priv = pp->private_data; |
| size_t written = 0; |
| |
| if (change_mode(pp, ECR_EPP)) |
| return 0; |
| for (; written < length; written++) { |
| if (set_1284_register(pp, 4, (char *)buf, GFP_KERNEL)) |
| break; |
| ((char*)buf)++; |
| if (get_1284_register(pp, 1, NULL, GFP_KERNEL)) |
| break; |
| if (priv->reg[0] & 0x01) { |
| clear_epp_timeout(pp); |
| break; |
| } |
| } |
| change_mode(pp, ECR_PS2); |
| return written; |
| #else |
| struct parport_uss720_private *priv = pp->private_data; |
| struct usb_device *usbdev = priv->usbdev; |
| int rlen; |
| int i; |
| |
| if (!usbdev) |
| return 0; |
| if (change_mode(pp, ECR_EPP)) |
| return 0; |
| i = usb_bulk_msg(usbdev, usb_sndbulkpipe(usbdev, 1), (void *)buf, length, &rlen, 20000); |
| if (i) |
| printk(KERN_ERR "uss720: sendbulk ep 1 buf %p len %Zu rlen %u\n", buf, length, rlen); |
| change_mode(pp, ECR_PS2); |
| return rlen; |
| #endif |
| } |
| |
| static size_t parport_uss720_epp_read_addr(struct parport *pp, void *buf, size_t length, int flags) |
| { |
| struct parport_uss720_private *priv = pp->private_data; |
| size_t got = 0; |
| |
| if (change_mode(pp, ECR_EPP)) |
| return 0; |
| for (; got < length; got++) { |
| if (get_1284_register(pp, 3, (char *)buf, GFP_KERNEL)) |
| break; |
| buf++; |
| if (priv->reg[0] & 0x01) { |
| clear_epp_timeout(pp); |
| break; |
| } |
| } |
| change_mode(pp, ECR_PS2); |
| return got; |
| } |
| |
| static size_t parport_uss720_epp_write_addr(struct parport *pp, const void *buf, size_t length, int flags) |
| { |
| struct parport_uss720_private *priv = pp->private_data; |
| size_t written = 0; |
| |
| if (change_mode(pp, ECR_EPP)) |
| return 0; |
| for (; written < length; written++) { |
| if (set_1284_register(pp, 3, *(char *)buf, GFP_KERNEL)) |
| break; |
| buf++; |
| if (get_1284_register(pp, 1, NULL, GFP_KERNEL)) |
| break; |
| if (priv->reg[0] & 0x01) { |
| clear_epp_timeout(pp); |
| break; |
| } |
| } |
| change_mode(pp, ECR_PS2); |
| return written; |
| } |
| |
| static size_t parport_uss720_ecp_write_data(struct parport *pp, const void *buffer, size_t len, int flags) |
| { |
| struct parport_uss720_private *priv = pp->private_data; |
| struct usb_device *usbdev = priv->usbdev; |
| int rlen; |
| int i; |
| |
| if (!usbdev) |
| return 0; |
| if (change_mode(pp, ECR_ECP)) |
| return 0; |
| i = usb_bulk_msg(usbdev, usb_sndbulkpipe(usbdev, 1), (void *)buffer, len, &rlen, 20000); |
| if (i) |
| printk(KERN_ERR "uss720: sendbulk ep 1 buf %p len %Zu rlen %u\n", buffer, len, rlen); |
| change_mode(pp, ECR_PS2); |
| return rlen; |
| } |
| |
| static size_t parport_uss720_ecp_read_data(struct parport *pp, void *buffer, size_t len, int flags) |
| { |
| struct parport_uss720_private *priv = pp->private_data; |
| struct usb_device *usbdev = priv->usbdev; |
| int rlen; |
| int i; |
| |
| if (!usbdev) |
| return 0; |
| if (change_mode(pp, ECR_ECP)) |
| return 0; |
| i = usb_bulk_msg(usbdev, usb_rcvbulkpipe(usbdev, 2), buffer, len, &rlen, 20000); |
| if (i) |
| printk(KERN_ERR "uss720: recvbulk ep 2 buf %p len %Zu rlen %u\n", buffer, len, rlen); |
| change_mode(pp, ECR_PS2); |
| return rlen; |
| } |
| |
| static size_t parport_uss720_ecp_write_addr(struct parport *pp, const void *buffer, size_t len, int flags) |
| { |
| size_t written = 0; |
| |
| if (change_mode(pp, ECR_ECP)) |
| return 0; |
| for (; written < len; written++) { |
| if (set_1284_register(pp, 5, *(char *)buffer, GFP_KERNEL)) |
| break; |
| buffer++; |
| } |
| change_mode(pp, ECR_PS2); |
| return written; |
| } |
| |
| static size_t parport_uss720_write_compat(struct parport *pp, const void *buffer, size_t len, int flags) |
| { |
| struct parport_uss720_private *priv = pp->private_data; |
| struct usb_device *usbdev = priv->usbdev; |
| int rlen; |
| int i; |
| |
| if (!usbdev) |
| return 0; |
| if (change_mode(pp, ECR_PPF)) |
| return 0; |
| i = usb_bulk_msg(usbdev, usb_sndbulkpipe(usbdev, 1), (void *)buffer, len, &rlen, 20000); |
| if (i) |
| printk(KERN_ERR "uss720: sendbulk ep 1 buf %p len %Zu rlen %u\n", buffer, len, rlen); |
| change_mode(pp, ECR_PS2); |
| return rlen; |
| } |
| |
| /* --------------------------------------------------------------------- */ |
| |
| static struct parport_operations parport_uss720_ops = |
| { |
| .owner = THIS_MODULE, |
| .write_data = parport_uss720_write_data, |
| .read_data = parport_uss720_read_data, |
| |
| .write_control = parport_uss720_write_control, |
| .read_control = parport_uss720_read_control, |
| .frob_control = parport_uss720_frob_control, |
| |
| .read_status = parport_uss720_read_status, |
| |
| .enable_irq = parport_uss720_enable_irq, |
| .disable_irq = parport_uss720_disable_irq, |
| |
| .data_forward = parport_uss720_data_forward, |
| .data_reverse = parport_uss720_data_reverse, |
| |
| .init_state = parport_uss720_init_state, |
| .save_state = parport_uss720_save_state, |
| .restore_state = parport_uss720_restore_state, |
| |
| .epp_write_data = parport_uss720_epp_write_data, |
| .epp_read_data = parport_uss720_epp_read_data, |
| .epp_write_addr = parport_uss720_epp_write_addr, |
| .epp_read_addr = parport_uss720_epp_read_addr, |
| |
| .ecp_write_data = parport_uss720_ecp_write_data, |
| .ecp_read_data = parport_uss720_ecp_read_data, |
| .ecp_write_addr = parport_uss720_ecp_write_addr, |
| |
| .compat_write_data = parport_uss720_write_compat, |
| .nibble_read_data = parport_ieee1284_read_nibble, |
| .byte_read_data = parport_ieee1284_read_byte, |
| }; |
| |
| /* --------------------------------------------------------------------- */ |
| |
| static int uss720_probe(struct usb_interface *intf, |
| const struct usb_device_id *id) |
| { |
| struct usb_device *usbdev = usb_get_dev(interface_to_usbdev(intf)); |
| struct usb_host_interface *interface; |
| struct usb_host_endpoint *endpoint; |
| struct parport_uss720_private *priv; |
| struct parport *pp; |
| unsigned char reg; |
| int i; |
| |
| dev_dbg(&intf->dev, "probe: vendor id 0x%x, device id 0x%x\n", |
| le16_to_cpu(usbdev->descriptor.idVendor), |
| le16_to_cpu(usbdev->descriptor.idProduct)); |
| |
| /* our known interfaces have 3 alternate settings */ |
| if (intf->num_altsetting != 3) { |
| usb_put_dev(usbdev); |
| return -ENODEV; |
| } |
| i = usb_set_interface(usbdev, intf->altsetting->desc.bInterfaceNumber, 2); |
| dev_dbg(&intf->dev, "set inteface result %d\n", i); |
| |
| interface = intf->cur_altsetting; |
| |
| /* |
| * Allocate parport interface |
| */ |
| if (!(priv = kzalloc(sizeof(struct parport_uss720_private), GFP_KERNEL))) { |
| usb_put_dev(usbdev); |
| return -ENOMEM; |
| } |
| priv->pp = NULL; |
| priv->usbdev = usbdev; |
| kref_init(&priv->ref_count); |
| spin_lock_init(&priv->asynclock); |
| INIT_LIST_HEAD(&priv->asynclist); |
| if (!(pp = parport_register_port(0, PARPORT_IRQ_NONE, PARPORT_DMA_NONE, &parport_uss720_ops))) { |
| printk(KERN_WARNING "uss720: could not register parport\n"); |
| goto probe_abort; |
| } |
| |
| priv->pp = pp; |
| pp->private_data = priv; |
| pp->modes = PARPORT_MODE_PCSPP | PARPORT_MODE_TRISTATE | PARPORT_MODE_EPP | PARPORT_MODE_ECP | PARPORT_MODE_COMPAT; |
| |
| /* set the USS720 control register to manual mode, no ECP compression, enable all ints */ |
| set_1284_register(pp, 7, 0x00, GFP_KERNEL); |
| set_1284_register(pp, 6, 0x30, GFP_KERNEL); /* PS/2 mode */ |
| set_1284_register(pp, 2, 0x0c, GFP_KERNEL); |
| /* debugging */ |
| get_1284_register(pp, 0, ®, GFP_KERNEL); |
| dev_dbg(&intf->dev, "reg: %02x %02x %02x %02x %02x %02x %02x\n", |
| priv->reg[0], priv->reg[1], priv->reg[2], priv->reg[3], |
| priv->reg[4], priv->reg[5], priv->reg[6]); |
| |
| endpoint = &interface->endpoint[2]; |
| dev_dbg(&intf->dev, "epaddr %d interval %d\n", |
| endpoint->desc.bEndpointAddress, endpoint->desc.bInterval); |
| parport_announce_port(pp); |
| |
| usb_set_intfdata(intf, pp); |
| return 0; |
| |
| probe_abort: |
| kill_all_async_requests_priv(priv); |
| kref_put(&priv->ref_count, destroy_priv); |
| return -ENODEV; |
| } |
| |
| static void uss720_disconnect(struct usb_interface *intf) |
| { |
| struct parport *pp = usb_get_intfdata(intf); |
| struct parport_uss720_private *priv; |
| struct usb_device *usbdev; |
| |
| dev_dbg(&intf->dev, "disconnect\n"); |
| usb_set_intfdata(intf, NULL); |
| if (pp) { |
| priv = pp->private_data; |
| usbdev = priv->usbdev; |
| priv->usbdev = NULL; |
| priv->pp = NULL; |
| dev_dbg(&intf->dev, "parport_remove_port\n"); |
| parport_remove_port(pp); |
| parport_put_port(pp); |
| kill_all_async_requests_priv(priv); |
| kref_put(&priv->ref_count, destroy_priv); |
| } |
| dev_dbg(&intf->dev, "disconnect done\n"); |
| } |
| |
| /* table of cables that work through this driver */ |
| static const struct usb_device_id uss720_table[] = { |
| { USB_DEVICE(0x047e, 0x1001) }, |
| { USB_DEVICE(0x0557, 0x2001) }, |
| { USB_DEVICE(0x0729, 0x1284) }, |
| { USB_DEVICE(0x1293, 0x0002) }, |
| { USB_DEVICE(0x050d, 0x0002) }, |
| { } /* Terminating entry */ |
| }; |
| |
| MODULE_DEVICE_TABLE (usb, uss720_table); |
| |
| |
| static struct usb_driver uss720_driver = { |
| .name = "uss720", |
| .probe = uss720_probe, |
| .disconnect = uss720_disconnect, |
| .id_table = uss720_table, |
| }; |
| |
| /* --------------------------------------------------------------------- */ |
| |
| MODULE_AUTHOR(DRIVER_AUTHOR); |
| MODULE_DESCRIPTION(DRIVER_DESC); |
| MODULE_LICENSE("GPL"); |
| |
| static int __init uss720_init(void) |
| { |
| int retval; |
| retval = usb_register(&uss720_driver); |
| if (retval) |
| goto out; |
| |
| printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_VERSION ":" |
| DRIVER_DESC "\n"); |
| printk(KERN_INFO KBUILD_MODNAME ": NOTE: this is a special purpose " |
| "driver to allow nonstandard\n"); |
| printk(KERN_INFO KBUILD_MODNAME ": protocols (eg. bitbang) over " |
| "USS720 usb to parallel cables\n"); |
| printk(KERN_INFO KBUILD_MODNAME ": If you just want to connect to a " |
| "printer, use usblp instead\n"); |
| out: |
| return retval; |
| } |
| |
| static void __exit uss720_cleanup(void) |
| { |
| usb_deregister(&uss720_driver); |
| } |
| |
| module_init(uss720_init); |
| module_exit(uss720_cleanup); |
| |
| /* --------------------------------------------------------------------- */ |