| /* |
| * Regulator driver for PWM Regulators |
| * |
| * Copyright (C) 2014 - STMicroelectronics Inc. |
| * |
| * Author: Lee Jones <lee.jones@linaro.org> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| */ |
| |
| #include <linux/delay.h> |
| #include <linux/module.h> |
| #include <linux/init.h> |
| #include <linux/err.h> |
| #include <linux/regulator/driver.h> |
| #include <linux/regulator/machine.h> |
| #include <linux/regulator/of_regulator.h> |
| #include <linux/of.h> |
| #include <linux/of_device.h> |
| #include <linux/pwm.h> |
| |
| struct pwm_regulator_data { |
| /* Shared */ |
| struct pwm_device *pwm; |
| |
| /* Voltage table */ |
| struct pwm_voltages *duty_cycle_table; |
| int state; |
| |
| /* Continuous voltage */ |
| int volt_uV; |
| }; |
| |
| struct pwm_voltages { |
| unsigned int uV; |
| unsigned int dutycycle; |
| }; |
| |
| /** |
| * Voltage table call-backs |
| */ |
| static int pwm_regulator_get_voltage_sel(struct regulator_dev *rdev) |
| { |
| struct pwm_regulator_data *drvdata = rdev_get_drvdata(rdev); |
| |
| return drvdata->state; |
| } |
| |
| static int pwm_regulator_set_voltage_sel(struct regulator_dev *rdev, |
| unsigned selector) |
| { |
| struct pwm_regulator_data *drvdata = rdev_get_drvdata(rdev); |
| unsigned int pwm_reg_period; |
| int dutycycle; |
| int ret; |
| |
| pwm_reg_period = pwm_get_period(drvdata->pwm); |
| |
| dutycycle = (pwm_reg_period * |
| drvdata->duty_cycle_table[selector].dutycycle) / 100; |
| |
| ret = pwm_config(drvdata->pwm, dutycycle, pwm_reg_period); |
| if (ret) { |
| dev_err(&rdev->dev, "Failed to configure PWM\n"); |
| return ret; |
| } |
| |
| drvdata->state = selector; |
| |
| ret = pwm_enable(drvdata->pwm); |
| if (ret) { |
| dev_err(&rdev->dev, "Failed to enable PWM\n"); |
| return ret; |
| } |
| |
| return 0; |
| } |
| |
| static int pwm_regulator_list_voltage(struct regulator_dev *rdev, |
| unsigned selector) |
| { |
| struct pwm_regulator_data *drvdata = rdev_get_drvdata(rdev); |
| |
| if (selector >= rdev->desc->n_voltages) |
| return -EINVAL; |
| |
| return drvdata->duty_cycle_table[selector].uV; |
| } |
| |
| /** |
| * Continuous voltage call-backs |
| */ |
| static int pwm_voltage_to_duty_cycle_percentage(struct regulator_dev *rdev, int req_uV) |
| { |
| int min_uV = rdev->constraints->min_uV; |
| int max_uV = rdev->constraints->max_uV; |
| int diff = max_uV - min_uV; |
| |
| return 100 - (((req_uV * 100) - (min_uV * 100)) / diff); |
| } |
| |
| static int pwm_regulator_get_voltage(struct regulator_dev *rdev) |
| { |
| struct pwm_regulator_data *drvdata = rdev_get_drvdata(rdev); |
| |
| return drvdata->volt_uV; |
| } |
| |
| static int pwm_regulator_set_voltage(struct regulator_dev *rdev, |
| int min_uV, int max_uV, |
| unsigned *selector) |
| { |
| struct pwm_regulator_data *drvdata = rdev_get_drvdata(rdev); |
| unsigned int ramp_delay = rdev->constraints->ramp_delay; |
| unsigned int period = pwm_get_period(drvdata->pwm); |
| int duty_cycle; |
| int ret; |
| |
| duty_cycle = pwm_voltage_to_duty_cycle_percentage(rdev, min_uV); |
| |
| ret = pwm_config(drvdata->pwm, (period / 100) * duty_cycle, period); |
| if (ret) { |
| dev_err(&rdev->dev, "Failed to configure PWM\n"); |
| return ret; |
| } |
| |
| ret = pwm_enable(drvdata->pwm); |
| if (ret) { |
| dev_err(&rdev->dev, "Failed to enable PWM\n"); |
| return ret; |
| } |
| drvdata->volt_uV = min_uV; |
| |
| /* Delay required by PWM regulator to settle to the new voltage */ |
| usleep_range(ramp_delay, ramp_delay + 1000); |
| |
| return 0; |
| } |
| |
| static struct regulator_ops pwm_regulator_voltage_table_ops = { |
| .set_voltage_sel = pwm_regulator_set_voltage_sel, |
| .get_voltage_sel = pwm_regulator_get_voltage_sel, |
| .list_voltage = pwm_regulator_list_voltage, |
| .map_voltage = regulator_map_voltage_iterate, |
| }; |
| |
| static struct regulator_ops pwm_regulator_voltage_continuous_ops = { |
| .get_voltage = pwm_regulator_get_voltage, |
| .set_voltage = pwm_regulator_set_voltage, |
| }; |
| |
| static struct regulator_desc pwm_regulator_desc = { |
| .name = "pwm-regulator", |
| .type = REGULATOR_VOLTAGE, |
| .owner = THIS_MODULE, |
| .supply_name = "pwm", |
| }; |
| |
| static int pwm_regulator_init_table(struct platform_device *pdev, |
| struct pwm_regulator_data *drvdata) |
| { |
| struct device_node *np = pdev->dev.of_node; |
| struct pwm_voltages *duty_cycle_table; |
| unsigned int length = 0; |
| int ret; |
| |
| of_find_property(np, "voltage-table", &length); |
| |
| if ((length < sizeof(*duty_cycle_table)) || |
| (length % sizeof(*duty_cycle_table))) { |
| dev_err(&pdev->dev, |
| "voltage-table length(%d) is invalid\n", |
| length); |
| return -EINVAL; |
| } |
| |
| duty_cycle_table = devm_kzalloc(&pdev->dev, length, GFP_KERNEL); |
| if (!duty_cycle_table) |
| return -ENOMEM; |
| |
| ret = of_property_read_u32_array(np, "voltage-table", |
| (u32 *)duty_cycle_table, |
| length / sizeof(u32)); |
| if (ret) { |
| dev_err(&pdev->dev, "Failed to read voltage-table\n"); |
| return ret; |
| } |
| |
| drvdata->duty_cycle_table = duty_cycle_table; |
| pwm_regulator_desc.ops = &pwm_regulator_voltage_table_ops; |
| pwm_regulator_desc.n_voltages = length / sizeof(*duty_cycle_table); |
| |
| return 0; |
| } |
| |
| static int pwm_regulator_init_continuous(struct platform_device *pdev, |
| struct pwm_regulator_data *drvdata) |
| { |
| pwm_regulator_desc.ops = &pwm_regulator_voltage_continuous_ops; |
| pwm_regulator_desc.continuous_voltage_range = true; |
| |
| return 0; |
| } |
| |
| static int pwm_regulator_probe(struct platform_device *pdev) |
| { |
| const struct regulator_init_data *init_data; |
| struct pwm_regulator_data *drvdata; |
| struct regulator_dev *regulator; |
| struct regulator_config config = { }; |
| struct device_node *np = pdev->dev.of_node; |
| int ret; |
| |
| if (!np) { |
| dev_err(&pdev->dev, "Device Tree node missing\n"); |
| return -EINVAL; |
| } |
| |
| drvdata = devm_kzalloc(&pdev->dev, sizeof(*drvdata), GFP_KERNEL); |
| if (!drvdata) |
| return -ENOMEM; |
| |
| if (of_find_property(np, "voltage-table", NULL)) |
| ret = pwm_regulator_init_table(pdev, drvdata); |
| else |
| ret = pwm_regulator_init_continuous(pdev, drvdata); |
| if (ret) |
| return ret; |
| |
| init_data = of_get_regulator_init_data(&pdev->dev, np, |
| &pwm_regulator_desc); |
| if (!init_data) |
| return -ENOMEM; |
| |
| config.of_node = np; |
| config.dev = &pdev->dev; |
| config.driver_data = drvdata; |
| config.init_data = init_data; |
| |
| drvdata->pwm = devm_pwm_get(&pdev->dev, NULL); |
| if (IS_ERR(drvdata->pwm)) { |
| dev_err(&pdev->dev, "Failed to get PWM\n"); |
| return PTR_ERR(drvdata->pwm); |
| } |
| |
| regulator = devm_regulator_register(&pdev->dev, |
| &pwm_regulator_desc, &config); |
| if (IS_ERR(regulator)) { |
| dev_err(&pdev->dev, "Failed to register regulator %s\n", |
| pwm_regulator_desc.name); |
| return PTR_ERR(regulator); |
| } |
| |
| return 0; |
| } |
| |
| static const struct of_device_id pwm_of_match[] = { |
| { .compatible = "pwm-regulator" }, |
| { }, |
| }; |
| MODULE_DEVICE_TABLE(of, pwm_of_match); |
| |
| static struct platform_driver pwm_regulator_driver = { |
| .driver = { |
| .name = "pwm-regulator", |
| .of_match_table = of_match_ptr(pwm_of_match), |
| }, |
| .probe = pwm_regulator_probe, |
| }; |
| |
| module_platform_driver(pwm_regulator_driver); |
| |
| MODULE_LICENSE("GPL"); |
| MODULE_AUTHOR("Lee Jones <lee.jones@linaro.org>"); |
| MODULE_DESCRIPTION("PWM Regulator Driver"); |
| MODULE_ALIAS("platform:pwm-regulator"); |