drivers/leds/leds-blinkm.c - kernel/msm-4.9 - Gitiles

 /*
  *  leds-blinkm.c
  *  (c) Jan-Simon Möller (dl9pf@gmx.de)
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
  *  the Free Software Foundation; either version 2 of the License, or
  *  (at your option) any later version.
  *
  *  This program is distributed in the hope that it will be useful,
  *  but WITHOUT ANY WARRANTY; without even the implied warranty of
  *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  *  GNU General Public License for more details.
  *
  *  You should have received a copy of the GNU General Public License
  *  along with this program; if not, write to the Free Software
  *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  */

 #include <linux/module.h>
 #include <linux/slab.h>
 #include <linux/jiffies.h>
 #include <linux/i2c.h>
 #include <linux/err.h>
 #include <linux/mutex.h>
 #include <linux/sysfs.h>
 #include <linux/printk.h>
 #include <linux/pm_runtime.h>
 #include <linux/leds.h>
 #include <linux/delay.h>

 /* Addresses to scan - BlinkM is on 0x09 by default*/
 static const unsigned short normal_i2c[] = { 0x09, I2C_CLIENT_END };

 static int blinkm_transfer_hw(struct i2c_client *client, int cmd);
 static int blinkm_test_run(struct i2c_client *client);

 struct blinkm_led {
 	struct i2c_client *i2c_client;
 	struct led_classdev led_cdev;
 	int id;
 };

 #define cdev_to_blmled(c)          container_of(c, struct blinkm_led, led_cdev)

 struct blinkm_data {
 	struct i2c_client *i2c_client;
 	struct mutex update_lock;
 	/* used for led class interface */
 	struct blinkm_led blinkm_leds[3];
 	/* used for "blinkm" sysfs interface */
 	u8 red;			/* color red */
 	u8 green;		/* color green */
 	u8 blue;		/* color blue */
 	/* next values to use for transfer */
 	u8 next_red;			/* color red */
 	u8 next_green;		/* color green */
 	u8 next_blue;		/* color blue */
 	/* internal use */
 	u8 args[7];		/* set of args for transmission */
 	u8 i2c_addr;		/* i2c addr */
 	u8 fw_ver;		/* firmware version */
 	/* used, but not from userspace */
 	u8 hue;			/* HSB  hue */
 	u8 saturation;		/* HSB  saturation */
 	u8 brightness;		/* HSB  brightness */
 	u8 next_hue;			/* HSB  hue */
 	u8 next_saturation;		/* HSB  saturation */
 	u8 next_brightness;		/* HSB  brightness */
 	/* currently unused / todo */
 	u8 fade_speed;		/* fade speed     1 - 255 */
 	s8 time_adjust;		/* time adjust -128 - 127 */
 	u8 fade:1;		/* fade on = 1, off = 0 */
 	u8 rand:1;		/* rand fade mode on = 1 */
 	u8 script_id;		/* script ID */
 	u8 script_repeats;	/* repeats of script */
 	u8 script_startline;	/* line to start */
 };

 /* Colors */
 #define RED   0
 #define GREEN 1
 #define BLUE  2

 /* mapping command names to cmd chars - see datasheet */
 #define BLM_GO_RGB            0
 #define BLM_FADE_RGB          1
 #define BLM_FADE_HSB          2
 #define BLM_FADE_RAND_RGB     3
 #define BLM_FADE_RAND_HSB     4
 #define BLM_PLAY_SCRIPT       5
 #define BLM_STOP_SCRIPT       6
 #define BLM_SET_FADE_SPEED    7
 #define BLM_SET_TIME_ADJ      8
 #define BLM_GET_CUR_RGB       9
 #define BLM_WRITE_SCRIPT_LINE 10
 #define BLM_READ_SCRIPT_LINE  11
 #define BLM_SET_SCRIPT_LR     12	/* Length & Repeats */
 #define BLM_SET_ADDR          13
 #define BLM_GET_ADDR          14
 #define BLM_GET_FW_VER        15
 #define BLM_SET_STARTUP_PARAM 16

 /* BlinkM Commands
  *  as extracted out of the datasheet:
  *
  *  cmdchar = command (ascii)
  *  cmdbyte = command in hex
  *  nr_args = number of arguments (to send)
  *  nr_ret  = number of return values (to read)
  *  dir = direction (0 = read, 1 = write, 2 = both)
  *
  */
 static const struct {
 	char cmdchar;
 	u8 cmdbyte;
 	u8 nr_args;
 	u8 nr_ret;
 	u8 dir:2;
 } blinkm_cmds[17] = {
   /* cmdchar, cmdbyte, nr_args, nr_ret,  dir */
 	{ 'n', 0x6e, 3, 0, 1},
 	{ 'c', 0x63, 3, 0, 1},
 	{ 'h', 0x68, 3, 0, 1},
 	{ 'C', 0x43, 3, 0, 1},
 	{ 'H', 0x48, 3, 0, 1},
 	{ 'p', 0x70, 3, 0, 1},
 	{ 'o', 0x6f, 0, 0, 1},
 	{ 'f', 0x66, 1, 0, 1},
 	{ 't', 0x74, 1, 0, 1},
 	{ 'g', 0x67, 0, 3, 0},
 	{ 'W', 0x57, 7, 0, 1},
 	{ 'R', 0x52, 2, 5, 2},
 	{ 'L', 0x4c, 3, 0, 1},
 	{ 'A', 0x41, 4, 0, 1},
 	{ 'a', 0x61, 0, 1, 0},
 	{ 'Z', 0x5a, 0, 1, 0},
 	{ 'B', 0x42, 5, 0, 1},
 };

 static ssize_t show_color_common(struct device *dev, char *buf, int color)
 {
 	struct i2c_client *client;
 	struct blinkm_data *data;
 	int ret;

 	client = to_i2c_client(dev);
 	data = i2c_get_clientdata(client);

 	ret = blinkm_transfer_hw(client, BLM_GET_CUR_RGB);
 	if (ret < 0)
 		return ret;
 	switch (color) {
 	case RED:
 		return scnprintf(buf, PAGE_SIZE, "%02X\n", data->red);
 	case GREEN:
 		return scnprintf(buf, PAGE_SIZE, "%02X\n", data->green);
 	case BLUE:
 		return scnprintf(buf, PAGE_SIZE, "%02X\n", data->blue);
 	default:
 		return -EINVAL;
 	}
 	return -EINVAL;
 }

 static int store_color_common(struct device *dev, const char *buf, int color)
 {
 	struct i2c_client *client;
 	struct blinkm_data *data;
 	int ret;
 	u8 value;

 	client = to_i2c_client(dev);
 	data = i2c_get_clientdata(client);

 	ret = kstrtou8(buf, 10, &value);
 	if (ret < 0) {
 		dev_err(dev, "BlinkM: value too large!\n");
 		return ret;
 	}

 	switch (color) {
 	case RED:
 		data->next_red = value;
 		break;
 	case GREEN:
 		data->next_green = value;
 		break;
 	case BLUE:
 		data->next_blue = value;
 		break;
 	default:
 		return -EINVAL;
 	}

 	dev_dbg(dev, "next_red = %d, next_green = %d, next_blue = %d\n",
 			data->next_red, data->next_green, data->next_blue);

 	/* if mode ... */
 	ret = blinkm_transfer_hw(client, BLM_GO_RGB);
 	if (ret < 0) {
 		dev_err(dev, "BlinkM: can't set RGB\n");
 		return ret;
 	}
 	return 0;
 }

 static ssize_t show_red(struct device *dev, struct device_attribute *attr,
 			char *buf)
 {
 	return show_color_common(dev, buf, RED);
 }

 static ssize_t store_red(struct device *dev, struct device_attribute *attr,
 			 const char *buf, size_t count)
 {
 	int ret;

 	ret = store_color_common(dev, buf, RED);
 	if (ret < 0)
 		return ret;
 	return count;
 }

 static DEVICE_ATTR(red, S_IRUGO | S_IWUSR, show_red, store_red);

 static ssize_t show_green(struct device *dev, struct device_attribute *attr,
 			  char *buf)
 {
 	return show_color_common(dev, buf, GREEN);
 }

 static ssize_t store_green(struct device *dev, struct device_attribute *attr,
 			   const char *buf, size_t count)
 {

 	int ret;

 	ret = store_color_common(dev, buf, GREEN);
 	if (ret < 0)
 		return ret;
 	return count;
 }

 static DEVICE_ATTR(green, S_IRUGO | S_IWUSR, show_green, store_green);

 static ssize_t show_blue(struct device *dev, struct device_attribute *attr,
 			 char *buf)
 {
 	return show_color_common(dev, buf, BLUE);
 }

 static ssize_t store_blue(struct device *dev, struct device_attribute *attr,
 			  const char *buf, size_t count)
 {
 	int ret;

 	ret = store_color_common(dev, buf, BLUE);
 	if (ret < 0)
 		return ret;
 	return count;
 }

 static DEVICE_ATTR(blue, S_IRUGO | S_IWUSR, show_blue, store_blue);

 static ssize_t show_test(struct device *dev, struct device_attribute *attr,
 			 char *buf)
 {
 	return scnprintf(buf, PAGE_SIZE,
 			 "#Write into test to start test sequence!#\n");
 }

 static ssize_t store_test(struct device *dev, struct device_attribute *attr,
 			  const char *buf, size_t count)
 {

 	struct i2c_client *client;
 	int ret;
 	client = to_i2c_client(dev);

 	/*test */
 	ret = blinkm_test_run(client);
 	if (ret < 0)
 		return ret;

 	return count;
 }

 static DEVICE_ATTR(test, S_IRUGO | S_IWUSR, show_test, store_test);

 /* TODO: HSB, fade, timeadj, script ... */

 static struct attribute *blinkm_attrs[] = {
 	&dev_attr_red.attr,
 	&dev_attr_green.attr,
 	&dev_attr_blue.attr,
 	&dev_attr_test.attr,
 	NULL,
 };

 static struct attribute_group blinkm_group = {
 	.name = "blinkm",
 	.attrs = blinkm_attrs,
 };

 static int blinkm_write(struct i2c_client *client, int cmd, u8 *arg)
 {
 	int result;
 	int i;
 	int arglen = blinkm_cmds[cmd].nr_args;
 	/* write out cmd to blinkm - always / default step */
 	result = i2c_smbus_write_byte(client, blinkm_cmds[cmd].cmdbyte);
 	if (result < 0)
 		return result;
 	/* no args to write out */
 	if (arglen == 0)
 		return 0;

 	for (i = 0; i < arglen; i++) {
 		/* repeat for arglen */
 		result = i2c_smbus_write_byte(client, arg[i]);
 		if (result < 0)
 			return result;
 	}
 	return 0;
 }

 static int blinkm_read(struct i2c_client *client, int cmd, u8 *arg)
 {
 	int result;
 	int i;
 	int retlen = blinkm_cmds[cmd].nr_ret;
 	for (i = 0; i < retlen; i++) {
 		/* repeat for retlen */
 		result = i2c_smbus_read_byte(client);
 		if (result < 0)
 			return result;
 		arg[i] = result;
 	}

 	return 0;
 }

 static int blinkm_transfer_hw(struct i2c_client *client, int cmd)
 {
 	/* the protocol is simple but non-standard:
 	 * e.g.  cmd 'g' (= 0x67) for "get device address"
 	 * - which defaults to 0x09 - would be the sequence:
 	 *   a) write 0x67 to the device (byte write)
 	 *   b) read the value (0x09) back right after (byte read)
 	 *
 	 * Watch out for "unfinished" sequences (i.e. not enough reads
 	 * or writes after a command. It will make the blinkM misbehave.
 	 * Sequence is key here.
 	 */

 	/* args / return are in private data struct */
 	struct blinkm_data *data = i2c_get_clientdata(client);

 	/* We start hardware transfers which are not to be
 	 * mixed with other commands. Aquire a lock now. */
 	if (mutex_lock_interruptible(&data->update_lock) < 0)
 		return -EAGAIN;

 	/* switch cmd - usually write before reads */
 	switch (cmd) {
 	case BLM_FADE_RAND_RGB:
 	case BLM_GO_RGB:
 	case BLM_FADE_RGB:
 		data->args[0] = data->next_red;
 		data->args[1] = data->next_green;
 		data->args[2] = data->next_blue;
 		blinkm_write(client, cmd, data->args);
 		data->red = data->args[0];
 		data->green = data->args[1];
 		data->blue = data->args[2];
 		break;
 	case BLM_FADE_HSB:
 	case BLM_FADE_RAND_HSB:
 		data->args[0] = data->next_hue;
 		data->args[1] = data->next_saturation;
 		data->args[2] = data->next_brightness;
 		blinkm_write(client, cmd, data->args);
 		data->hue = data->next_hue;
 		data->saturation = data->next_saturation;
 		data->brightness = data->next_brightness;
 		break;
 	case BLM_PLAY_SCRIPT:
 		data->args[0] = data->script_id;
 		data->args[1] = data->script_repeats;
 		data->args[2] = data->script_startline;
 		blinkm_write(client, cmd, data->args);
 		break;
 	case BLM_STOP_SCRIPT:
 		blinkm_write(client, cmd, NULL);
 		break;
 	case BLM_GET_CUR_RGB:
 		data->args[0] = data->red;
 		data->args[1] = data->green;
 		data->args[2] = data->blue;
 		blinkm_write(client, cmd, NULL);
 		blinkm_read(client, cmd, data->args);
 		data->red = data->args[0];
 		data->green = data->args[1];
 		data->blue = data->args[2];
 		break;
 	case BLM_GET_ADDR:
 		data->args[0] = data->i2c_addr;
 		blinkm_write(client, cmd, NULL);
 		blinkm_read(client, cmd, data->args);
 		data->i2c_addr = data->args[0];
 		break;
 	case BLM_SET_TIME_ADJ:
 	case BLM_SET_FADE_SPEED:
 	case BLM_READ_SCRIPT_LINE:
 	case BLM_WRITE_SCRIPT_LINE:
 	case BLM_SET_SCRIPT_LR:
 	case BLM_SET_ADDR:
 	case BLM_GET_FW_VER:
 	case BLM_SET_STARTUP_PARAM:
 		dev_err(&client->dev,
 				"BlinkM: cmd %d not implemented yet.\n", cmd);
 		break;
 	default:
 		dev_err(&client->dev, "BlinkM: unknown command %d\n", cmd);
 		mutex_unlock(&data->update_lock);
 		return -EINVAL;
 	}			/* end switch(cmd) */

 	/* transfers done, unlock */
 	mutex_unlock(&data->update_lock);
 	return 0;
 }

 static int blinkm_led_common_set(struct led_classdev *led_cdev,
 				 enum led_brightness value, int color)
 {
 	/* led_brightness is 0, 127 or 255 - we just use it here as-is */
 	struct blinkm_led *led = cdev_to_blmled(led_cdev);
 	struct blinkm_data *data = i2c_get_clientdata(led->i2c_client);

 	switch (color) {
 	case RED:
 		/* bail out if there's no change */
 		if (data->next_red == (u8) value)
 			return 0;
 		data->next_red = (u8) value;
 		break;
 	case GREEN:
 		/* bail out if there's no change */
 		if (data->next_green == (u8) value)
 			return 0;
 		data->next_green = (u8) value;
 		break;
 	case BLUE:
 		/* bail out if there's no change */
 		if (data->next_blue == (u8) value)
 			return 0;
 		data->next_blue = (u8) value;
 		break;

 	default:
 		dev_err(&led->i2c_client->dev, "BlinkM: unknown color.\n");
 		return -EINVAL;
 	}

 	blinkm_transfer_hw(led->i2c_client, BLM_GO_RGB);
 	dev_dbg(&led->i2c_client->dev,
 			"# DONE # next_red = %d, next_green = %d,"
 			" next_blue = %d\n",
 			data->next_red, data->next_green,
 			data->next_blue);
 	return 0;
 }

 static int blinkm_led_red_set(struct led_classdev *led_cdev,
 			       enum led_brightness value)
 {
 	return blinkm_led_common_set(led_cdev, value, RED);
 }

 static int blinkm_led_green_set(struct led_classdev *led_cdev,
 				 enum led_brightness value)
 {
 	return blinkm_led_common_set(led_cdev, value, GREEN);
 }

 static int blinkm_led_blue_set(struct led_classdev *led_cdev,
 				enum led_brightness value)
 {
 	return blinkm_led_common_set(led_cdev, value, BLUE);
 }

 static void blinkm_init_hw(struct i2c_client *client)
 {
 	int ret;
 	ret = blinkm_transfer_hw(client, BLM_STOP_SCRIPT);
 	ret = blinkm_transfer_hw(client, BLM_GO_RGB);
 }

 static int blinkm_test_run(struct i2c_client *client)
 {
 	int ret;
 	struct blinkm_data *data = i2c_get_clientdata(client);

 	data->next_red = 0x01;
 	data->next_green = 0x05;
 	data->next_blue = 0x10;
 	ret = blinkm_transfer_hw(client, BLM_GO_RGB);
 	if (ret < 0)
 		return ret;
 	msleep(2000);

 	data->next_red = 0x25;
 	data->next_green = 0x10;
 	data->next_blue = 0x31;
 	ret = blinkm_transfer_hw(client, BLM_FADE_RGB);
 	if (ret < 0)
 		return ret;
 	msleep(2000);

 	data->next_hue = 0x50;
 	data->next_saturation = 0x10;
 	data->next_brightness = 0x20;
 	ret = blinkm_transfer_hw(client, BLM_FADE_HSB);
 	if (ret < 0)
 		return ret;
 	msleep(2000);

 	return 0;
 }

 /* Return 0 if detection is successful, -ENODEV otherwise */
 static int blinkm_detect(struct i2c_client *client, struct i2c_board_info *info)
 {
 	struct i2c_adapter *adapter = client->adapter;
 	int ret;
 	int count = 99;
 	u8 tmpargs[7];

 	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA
 				     | I2C_FUNC_SMBUS_WORD_DATA
 				     | I2C_FUNC_SMBUS_WRITE_BYTE))
 		return -ENODEV;

 	/* Now, we do the remaining detection. Simple for now. */
 	/* We might need more guards to protect other i2c slaves */

 	/* make sure the blinkM is balanced (read/writes) */
 	while (count > 0) {
 		ret = blinkm_write(client, BLM_GET_ADDR, NULL);
 		usleep_range(5000, 10000);
 		ret = blinkm_read(client, BLM_GET_ADDR, tmpargs);
 		usleep_range(5000, 10000);
 		if (tmpargs[0] == 0x09)
 			count = 0;
 		count--;
 	}

 	/* Step 1: Read BlinkM address back  -  cmd_char 'a' */
 	ret = blinkm_write(client, BLM_GET_ADDR, NULL);
 	if (ret < 0)
 		return ret;
 	usleep_range(20000, 30000);	/* allow a small delay */
 	ret = blinkm_read(client, BLM_GET_ADDR, tmpargs);
 	if (ret < 0)
 		return ret;

 	if (tmpargs[0] != 0x09) {
 		dev_err(&client->dev, "enodev DEV ADDR = 0x%02X\n", tmpargs[0]);
 		return -ENODEV;
 	}

 	strlcpy(info->type, "blinkm", I2C_NAME_SIZE);
 	return 0;
 }

 static int blinkm_probe(struct i2c_client *client,
 			const struct i2c_device_id *id)
 {
 	struct blinkm_data *data;
 	struct blinkm_led *led[3];
 	int err, i;
 	char blinkm_led_name[28];

 	data = devm_kzalloc(&client->dev,
 			sizeof(struct blinkm_data), GFP_KERNEL);
 	if (!data) {
 		err = -ENOMEM;
 		goto exit;
 	}

 	data->i2c_addr = 0x09;
 	data->i2c_addr = 0x08;
 	/* i2c addr  - use fake addr of 0x08 initially (real is 0x09) */
 	data->fw_ver = 0xfe;
 	/* firmware version - use fake until we read real value
 	 * (currently broken - BlinkM confused!) */
 	data->script_id = 0x01;
 	data->i2c_client = client;

 	i2c_set_clientdata(client, data);
 	mutex_init(&data->update_lock);

 	/* Register sysfs hooks */
 	err = sysfs_create_group(&client->dev.kobj, &blinkm_group);
 	if (err < 0) {
 		dev_err(&client->dev, "couldn't register sysfs group\n");
 		goto exit;
 	}

 	for (i = 0; i < 3; i++) {
 		/* RED = 0, GREEN = 1, BLUE = 2 */
 		led[i] = &data->blinkm_leds[i];
 		led[i]->i2c_client = client;
 		led[i]->id = i;
 		led[i]->led_cdev.max_brightness = 255;
 		led[i]->led_cdev.flags = LED_CORE_SUSPENDRESUME;
 		switch (i) {
 		case RED:
 			snprintf(blinkm_led_name, sizeof(blinkm_led_name),
 					 "blinkm-%d-%d-red",
 					 client->adapter->nr,
 					 client->addr);
 			led[i]->led_cdev.name = blinkm_led_name;
 			led[i]->led_cdev.brightness_set_blocking =
 							blinkm_led_red_set;
 			err = led_classdev_register(&client->dev,
 						    &led[i]->led_cdev);
 			if (err < 0) {
 				dev_err(&client->dev,
 					"couldn't register LED %s\n",
 					led[i]->led_cdev.name);
 				goto failred;
 			}
 			break;
 		case GREEN:
 			snprintf(blinkm_led_name, sizeof(blinkm_led_name),
 					 "blinkm-%d-%d-green",
 					 client->adapter->nr,
 					 client->addr);
 			led[i]->led_cdev.name = blinkm_led_name;
 			led[i]->led_cdev.brightness_set_blocking =
 							blinkm_led_green_set;
 			err = led_classdev_register(&client->dev,
 						    &led[i]->led_cdev);
 			if (err < 0) {
 				dev_err(&client->dev,
 					"couldn't register LED %s\n",
 					led[i]->led_cdev.name);
 				goto failgreen;
 			}
 			break;
 		case BLUE:
 			snprintf(blinkm_led_name, sizeof(blinkm_led_name),
 					 "blinkm-%d-%d-blue",
 					 client->adapter->nr,
 					 client->addr);
 			led[i]->led_cdev.name = blinkm_led_name;
 			led[i]->led_cdev.brightness_set_blocking =
 							blinkm_led_blue_set;
 			err = led_classdev_register(&client->dev,
 						    &led[i]->led_cdev);
 			if (err < 0) {
 				dev_err(&client->dev,
 					"couldn't register LED %s\n",
 					led[i]->led_cdev.name);
 				goto failblue;
 			}
 			break;
 		}		/* end switch */
 	}			/* end for */

 	/* Initialize the blinkm */
 	blinkm_init_hw(client);

 	return 0;

 failblue:
 	led_classdev_unregister(&led[GREEN]->led_cdev);

 failgreen:
 	led_classdev_unregister(&led[RED]->led_cdev);

 failred:
 	sysfs_remove_group(&client->dev.kobj, &blinkm_group);
 exit:
 	return err;
 }

 static int blinkm_remove(struct i2c_client *client)
 {
 	struct blinkm_data *data = i2c_get_clientdata(client);
 	int ret = 0;
 	int i;

 	/* make sure no workqueue entries are pending */
 	for (i = 0; i < 3; i++)
 		led_classdev_unregister(&data->blinkm_leds[i].led_cdev);

 	/* reset rgb */
 	data->next_red = 0x00;
 	data->next_green = 0x00;
 	data->next_blue = 0x00;
 	ret = blinkm_transfer_hw(client, BLM_FADE_RGB);
 	if (ret < 0)
 		dev_err(&client->dev, "Failure in blinkm_remove ignored. Continuing.\n");

 	/* reset hsb */
 	data->next_hue = 0x00;
 	data->next_saturation = 0x00;
 	data->next_brightness = 0x00;
 	ret = blinkm_transfer_hw(client, BLM_FADE_HSB);
 	if (ret < 0)
 		dev_err(&client->dev, "Failure in blinkm_remove ignored. Continuing.\n");

 	/* red fade to off */
 	data->next_red = 0xff;
 	ret = blinkm_transfer_hw(client, BLM_GO_RGB);
 	if (ret < 0)
 		dev_err(&client->dev, "Failure in blinkm_remove ignored. Continuing.\n");

 	/* off */
 	data->next_red = 0x00;
 	ret = blinkm_transfer_hw(client, BLM_FADE_RGB);
 	if (ret < 0)
 		dev_err(&client->dev, "Failure in blinkm_remove ignored. Continuing.\n");

 	sysfs_remove_group(&client->dev.kobj, &blinkm_group);
 	return 0;
 }

 static const struct i2c_device_id blinkm_id[] = {
 	{"blinkm", 0},
 	{}
 };

 MODULE_DEVICE_TABLE(i2c, blinkm_id);

   /* This is the driver that will be inserted */
 static struct i2c_driver blinkm_driver = {
 	.class = I2C_CLASS_HWMON,
 	.driver = {
 		   .name = "blinkm",
 		   },
 	.probe = blinkm_probe,
 	.remove = blinkm_remove,
 	.id_table = blinkm_id,
 	.detect = blinkm_detect,
 	.address_list = normal_i2c,
 };

 module_i2c_driver(blinkm_driver);

 MODULE_AUTHOR("Jan-Simon Moeller <dl9pf@gmx.de>");
 MODULE_DESCRIPTION("BlinkM RGB LED driver");
 MODULE_LICENSE("GPL");
	/*
	* leds-blinkm.c
	* (c) Jan-Simon Möller (dl9pf@gmx.de)
	*
	* This program is free software; you can redistribute it and/or modify
	* it under the terms of the GNU General Public License as published by
	* the Free Software Foundation; either version 2 of the License, or
	* (at your option) any later version.
	*
	* This program is distributed in the hope that it will be useful,
	* but WITHOUT ANY WARRANTY; without even the implied warranty of
	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	* GNU General Public License for more details.
	*
	* You should have received a copy of the GNU General Public License
	* along with this program; if not, write to the Free Software
	* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
	*/

	#include <linux/module.h>
	#include <linux/slab.h>
	#include <linux/jiffies.h>
	#include <linux/i2c.h>
	#include <linux/err.h>
	#include <linux/mutex.h>
	#include <linux/sysfs.h>
	#include <linux/printk.h>
	#include <linux/pm_runtime.h>
	#include <linux/leds.h>
	#include <linux/delay.h>

	/* Addresses to scan - BlinkM is on 0x09 by default*/
	static const unsigned short normal_i2c[] = { 0x09, I2C_CLIENT_END };

	static int blinkm_transfer_hw(struct i2c_client *client, int cmd);
	static int blinkm_test_run(struct i2c_client *client);

	struct blinkm_led {
	struct i2c_client *i2c_client;
	struct led_classdev led_cdev;
	int id;
	};

	#define cdev_to_blmled(c) container_of(c, struct blinkm_led, led_cdev)

	struct blinkm_data {
	struct i2c_client *i2c_client;
	struct mutex update_lock;
	/* used for led class interface */
	struct blinkm_led blinkm_leds[3];
	/* used for "blinkm" sysfs interface */
	u8 red; /* color red */
	u8 green; /* color green */
	u8 blue; /* color blue */
	/* next values to use for transfer */
	u8 next_red; /* color red */
	u8 next_green; /* color green */
	u8 next_blue; /* color blue */
	/* internal use */
	u8 args[7]; /* set of args for transmission */
	u8 i2c_addr; /* i2c addr */
	u8 fw_ver; /* firmware version */
	/* used, but not from userspace */
	u8 hue; /* HSB hue */
	u8 saturation; /* HSB saturation */
	u8 brightness; /* HSB brightness */
	u8 next_hue; /* HSB hue */
	u8 next_saturation; /* HSB saturation */
	u8 next_brightness; /* HSB brightness */
	/* currently unused / todo */
	u8 fade_speed; /* fade speed 1 - 255 */
	s8 time_adjust; /* time adjust -128 - 127 */
	u8 fade:1; /* fade on = 1, off = 0 */
	u8 rand:1; /* rand fade mode on = 1 */
	u8 script_id; /* script ID */
	u8 script_repeats; /* repeats of script */
	u8 script_startline; /* line to start */
	};

	/* Colors */
	#define RED 0
	#define GREEN 1
	#define BLUE 2

	/* mapping command names to cmd chars - see datasheet */
	#define BLM_GO_RGB 0
	#define BLM_FADE_RGB 1
	#define BLM_FADE_HSB 2
	#define BLM_FADE_RAND_RGB 3
	#define BLM_FADE_RAND_HSB 4
	#define BLM_PLAY_SCRIPT 5
	#define BLM_STOP_SCRIPT 6
	#define BLM_SET_FADE_SPEED 7
	#define BLM_SET_TIME_ADJ 8
	#define BLM_GET_CUR_RGB 9
	#define BLM_WRITE_SCRIPT_LINE 10
	#define BLM_READ_SCRIPT_LINE 11
	#define BLM_SET_SCRIPT_LR 12 /* Length & Repeats */
	#define BLM_SET_ADDR 13
	#define BLM_GET_ADDR 14
	#define BLM_GET_FW_VER 15
	#define BLM_SET_STARTUP_PARAM 16

	/* BlinkM Commands
	* as extracted out of the datasheet:
	*
	* cmdchar = command (ascii)
	* cmdbyte = command in hex
	* nr_args = number of arguments (to send)
	* nr_ret = number of return values (to read)
	* dir = direction (0 = read, 1 = write, 2 = both)
	*
	*/
	static const struct {
	char cmdchar;
	u8 cmdbyte;
	u8 nr_args;
	u8 nr_ret;
	u8 dir:2;
	} blinkm_cmds[17] = {
	/* cmdchar, cmdbyte, nr_args, nr_ret, dir */
	{ 'n', 0x6e, 3, 0, 1},
	{ 'c', 0x63, 3, 0, 1},
	{ 'h', 0x68, 3, 0, 1},
	{ 'C', 0x43, 3, 0, 1},
	{ 'H', 0x48, 3, 0, 1},
	{ 'p', 0x70, 3, 0, 1},
	{ 'o', 0x6f, 0, 0, 1},
	{ 'f', 0x66, 1, 0, 1},
	{ 't', 0x74, 1, 0, 1},
	{ 'g', 0x67, 0, 3, 0},
	{ 'W', 0x57, 7, 0, 1},
	{ 'R', 0x52, 2, 5, 2},
	{ 'L', 0x4c, 3, 0, 1},
	{ 'A', 0x41, 4, 0, 1},
	{ 'a', 0x61, 0, 1, 0},
	{ 'Z', 0x5a, 0, 1, 0},
	{ 'B', 0x42, 5, 0, 1},
	};

	static ssize_t show_color_common(struct device dev, char buf, int color)
	{
	struct i2c_client *client;
	struct blinkm_data *data;
	int ret;

	client = to_i2c_client(dev);
	data = i2c_get_clientdata(client);

	ret = blinkm_transfer_hw(client, BLM_GET_CUR_RGB);
	if (ret < 0)
	return ret;
	switch (color) {
	case RED:
	return scnprintf(buf, PAGE_SIZE, "%02X\n", data->red);
	case GREEN:
	return scnprintf(buf, PAGE_SIZE, "%02X\n", data->green);
	case BLUE:
	return scnprintf(buf, PAGE_SIZE, "%02X\n", data->blue);
	default:
	return -EINVAL;
	}
	return -EINVAL;
	}

	static int store_color_common(struct device dev, const char buf, int color)
	{
	struct i2c_client *client;
	struct blinkm_data *data;
	int ret;
	u8 value;

	client = to_i2c_client(dev);
	data = i2c_get_clientdata(client);

	ret = kstrtou8(buf, 10, &value);
	if (ret < 0) {
	dev_err(dev, "BlinkM: value too large!\n");
	return ret;
	}

	switch (color) {
	case RED:
	data->next_red = value;
	break;
	case GREEN:
	data->next_green = value;
	break;
	case BLUE:
	data->next_blue = value;
	break;
	default:
	return -EINVAL;
	}

	dev_dbg(dev, "next_red = %d, next_green = %d, next_blue = %d\n",
	data->next_red, data->next_green, data->next_blue);

	/* if mode ... */
	ret = blinkm_transfer_hw(client, BLM_GO_RGB);
	if (ret < 0) {
	dev_err(dev, "BlinkM: can't set RGB\n");
	return ret;
	}
	return 0;
	}

	static ssize_t show_red(struct device dev, struct device_attribute attr,
	char *buf)
	{
	return show_color_common(dev, buf, RED);
	}

	static ssize_t store_red(struct device dev, struct device_attribute attr,
	const char *buf, size_t count)
	{
	int ret;

	ret = store_color_common(dev, buf, RED);
	if (ret < 0)
	return ret;
	return count;
	}

	static DEVICE_ATTR(red, S_IRUGO \| S_IWUSR, show_red, store_red);

	static ssize_t show_green(struct device dev, struct device_attribute attr,
	char *buf)
	{
	return show_color_common(dev, buf, GREEN);
	}

	static ssize_t store_green(struct device dev, struct device_attribute attr,
	const char *buf, size_t count)
	{

	int ret;

	ret = store_color_common(dev, buf, GREEN);
	if (ret < 0)
	return ret;
	return count;
	}

	static DEVICE_ATTR(green, S_IRUGO \| S_IWUSR, show_green, store_green);

	static ssize_t show_blue(struct device dev, struct device_attribute attr,
	char *buf)
	{
	return show_color_common(dev, buf, BLUE);
	}

	static ssize_t store_blue(struct device dev, struct device_attribute attr,
	const char *buf, size_t count)
	{
	int ret;

	ret = store_color_common(dev, buf, BLUE);
	if (ret < 0)
	return ret;
	return count;
	}

	static DEVICE_ATTR(blue, S_IRUGO \| S_IWUSR, show_blue, store_blue);

	static ssize_t show_test(struct device dev, struct device_attribute attr,
	char *buf)
	{
	return scnprintf(buf, PAGE_SIZE,
	"#Write into test to start test sequence!#\n");
	}

	static ssize_t store_test(struct device dev, struct device_attribute attr,
	const char *buf, size_t count)
	{

	struct i2c_client *client;
	int ret;
	client = to_i2c_client(dev);

	/test /
	ret = blinkm_test_run(client);
	if (ret < 0)
	return ret;

	return count;
	}

	static DEVICE_ATTR(test, S_IRUGO \| S_IWUSR, show_test, store_test);

	/* TODO: HSB, fade, timeadj, script ... */

	static struct attribute *blinkm_attrs[] = {
	&dev_attr_red.attr,
	&dev_attr_green.attr,
	&dev_attr_blue.attr,
	&dev_attr_test.attr,
	NULL,
	};

	static struct attribute_group blinkm_group = {
	.name = "blinkm",
	.attrs = blinkm_attrs,
	};

	static int blinkm_write(struct i2c_client client, int cmd, u8 arg)
	{
	int result;
	int i;
	int arglen = blinkm_cmds[cmd].nr_args;
	/* write out cmd to blinkm - always / default step */
	result = i2c_smbus_write_byte(client, blinkm_cmds[cmd].cmdbyte);
	if (result < 0)
	return result;
	/* no args to write out */
	if (arglen == 0)
	return 0;

	for (i = 0; i < arglen; i++) {
	/* repeat for arglen */
	result = i2c_smbus_write_byte(client, arg[i]);
	if (result < 0)
	return result;
	}
	return 0;
	}

	static int blinkm_read(struct i2c_client client, int cmd, u8 arg)
	{
	int result;
	int i;
	int retlen = blinkm_cmds[cmd].nr_ret;
	for (i = 0; i < retlen; i++) {
	/* repeat for retlen */
	result = i2c_smbus_read_byte(client);
	if (result < 0)
	return result;
	arg[i] = result;
	}

	return 0;
	}

	static int blinkm_transfer_hw(struct i2c_client *client, int cmd)
	{
	/* the protocol is simple but non-standard:
	* e.g. cmd 'g' (= 0x67) for "get device address"
	* - which defaults to 0x09 - would be the sequence:
	* a) write 0x67 to the device (byte write)
	* b) read the value (0x09) back right after (byte read)
	*
	* Watch out for "unfinished" sequences (i.e. not enough reads
	* or writes after a command. It will make the blinkM misbehave.
	* Sequence is key here.
	*/

	/* args / return are in private data struct */
	struct blinkm_data *data = i2c_get_clientdata(client);

	/* We start hardware transfers which are not to be
	* mixed with other commands. Aquire a lock now. */
	if (mutex_lock_interruptible(&data->update_lock) < 0)
	return -EAGAIN;

	/* switch cmd - usually write before reads */
	switch (cmd) {
	case BLM_FADE_RAND_RGB:
	case BLM_GO_RGB:
	case BLM_FADE_RGB:
	data->args[0] = data->next_red;
	data->args[1] = data->next_green;
	data->args[2] = data->next_blue;
	blinkm_write(client, cmd, data->args);
	data->red = data->args[0];
	data->green = data->args[1];
	data->blue = data->args[2];
	break;
	case BLM_FADE_HSB:
	case BLM_FADE_RAND_HSB:
	data->args[0] = data->next_hue;
	data->args[1] = data->next_saturation;
	data->args[2] = data->next_brightness;
	blinkm_write(client, cmd, data->args);
	data->hue = data->next_hue;
	data->saturation = data->next_saturation;
	data->brightness = data->next_brightness;
	break;
	case BLM_PLAY_SCRIPT:
	data->args[0] = data->script_id;
	data->args[1] = data->script_repeats;
	data->args[2] = data->script_startline;
	blinkm_write(client, cmd, data->args);
	break;
	case BLM_STOP_SCRIPT:
	blinkm_write(client, cmd, NULL);
	break;
	case BLM_GET_CUR_RGB:
	data->args[0] = data->red;
	data->args[1] = data->green;
	data->args[2] = data->blue;
	blinkm_write(client, cmd, NULL);
	blinkm_read(client, cmd, data->args);
	data->red = data->args[0];
	data->green = data->args[1];
	data->blue = data->args[2];
	break;
	case BLM_GET_ADDR:
	data->args[0] = data->i2c_addr;
	blinkm_write(client, cmd, NULL);
	blinkm_read(client, cmd, data->args);
	data->i2c_addr = data->args[0];
	break;
	case BLM_SET_TIME_ADJ:
	case BLM_SET_FADE_SPEED:
	case BLM_READ_SCRIPT_LINE:
	case BLM_WRITE_SCRIPT_LINE:
	case BLM_SET_SCRIPT_LR:
	case BLM_SET_ADDR:
	case BLM_GET_FW_VER:
	case BLM_SET_STARTUP_PARAM:
	dev_err(&client->dev,
	"BlinkM: cmd %d not implemented yet.\n", cmd);
	break;
	default:
	dev_err(&client->dev, "BlinkM: unknown command %d\n", cmd);
	mutex_unlock(&data->update_lock);
	return -EINVAL;
	} /* end switch(cmd) */

	/* transfers done, unlock */
	mutex_unlock(&data->update_lock);
	return 0;
	}

	static int blinkm_led_common_set(struct led_classdev *led_cdev,
	enum led_brightness value, int color)
	{
	/* led_brightness is 0, 127 or 255 - we just use it here as-is */
	struct blinkm_led *led = cdev_to_blmled(led_cdev);
	struct blinkm_data *data = i2c_get_clientdata(led->i2c_client);

	switch (color) {
	case RED:
	/* bail out if there's no change */
	if (data->next_red == (u8) value)
	return 0;
	data->next_red = (u8) value;
	break;
	case GREEN:
	/* bail out if there's no change */
	if (data->next_green == (u8) value)
	return 0;
	data->next_green = (u8) value;
	break;
	case BLUE:
	/* bail out if there's no change */
	if (data->next_blue == (u8) value)
	return 0;
	data->next_blue = (u8) value;
	break;

	default:
	dev_err(&led->i2c_client->dev, "BlinkM: unknown color.\n");
	return -EINVAL;
	}

	blinkm_transfer_hw(led->i2c_client, BLM_GO_RGB);
	dev_dbg(&led->i2c_client->dev,
	"# DONE # next_red = %d, next_green = %d,"
	" next_blue = %d\n",
	data->next_red, data->next_green,
	data->next_blue);
	return 0;
	}

	static int blinkm_led_red_set(struct led_classdev *led_cdev,
	enum led_brightness value)
	{
	return blinkm_led_common_set(led_cdev, value, RED);
	}

	static int blinkm_led_green_set(struct led_classdev *led_cdev,
	enum led_brightness value)
	{
	return blinkm_led_common_set(led_cdev, value, GREEN);
	}

	static int blinkm_led_blue_set(struct led_classdev *led_cdev,
	enum led_brightness value)
	{
	return blinkm_led_common_set(led_cdev, value, BLUE);
	}

	static void blinkm_init_hw(struct i2c_client *client)
	{
	int ret;
	ret = blinkm_transfer_hw(client, BLM_STOP_SCRIPT);
	ret = blinkm_transfer_hw(client, BLM_GO_RGB);
	}

	static int blinkm_test_run(struct i2c_client *client)
	{
	int ret;
	struct blinkm_data *data = i2c_get_clientdata(client);

	data->next_red = 0x01;
	data->next_green = 0x05;
	data->next_blue = 0x10;
	ret = blinkm_transfer_hw(client, BLM_GO_RGB);
	if (ret < 0)
	return ret;
	msleep(2000);

	data->next_red = 0x25;
	data->next_green = 0x10;
	data->next_blue = 0x31;
	ret = blinkm_transfer_hw(client, BLM_FADE_RGB);
	if (ret < 0)
	return ret;
	msleep(2000);

	data->next_hue = 0x50;
	data->next_saturation = 0x10;
	data->next_brightness = 0x20;
	ret = blinkm_transfer_hw(client, BLM_FADE_HSB);
	if (ret < 0)
	return ret;
	msleep(2000);

	return 0;
	}

	/* Return 0 if detection is successful, -ENODEV otherwise */
	static int blinkm_detect(struct i2c_client client, struct i2c_board_info info)
	{
	struct i2c_adapter *adapter = client->adapter;
	int ret;
	int count = 99;
	u8 tmpargs[7];

	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA
	\| I2C_FUNC_SMBUS_WORD_DATA
	\| I2C_FUNC_SMBUS_WRITE_BYTE))
	return -ENODEV;

	/* Now, we do the remaining detection. Simple for now. */
	/* We might need more guards to protect other i2c slaves */

	/* make sure the blinkM is balanced (read/writes) */
	while (count > 0) {
	ret = blinkm_write(client, BLM_GET_ADDR, NULL);
	usleep_range(5000, 10000);
	ret = blinkm_read(client, BLM_GET_ADDR, tmpargs);
	usleep_range(5000, 10000);
	if (tmpargs[0] == 0x09)
	count = 0;
	count--;
	}

	/* Step 1: Read BlinkM address back - cmd_char 'a' */
	ret = blinkm_write(client, BLM_GET_ADDR, NULL);
	if (ret < 0)
	return ret;
	usleep_range(20000, 30000); /* allow a small delay */
	ret = blinkm_read(client, BLM_GET_ADDR, tmpargs);
	if (ret < 0)
	return ret;

	if (tmpargs[0] != 0x09) {
	dev_err(&client->dev, "enodev DEV ADDR = 0x%02X\n", tmpargs[0]);
	return -ENODEV;
	}

	strlcpy(info->type, "blinkm", I2C_NAME_SIZE);
	return 0;
	}

	static int blinkm_probe(struct i2c_client *client,
	const struct i2c_device_id *id)
	{
	struct blinkm_data *data;
	struct blinkm_led *led[3];
	int err, i;
	char blinkm_led_name[28];

	data = devm_kzalloc(&client->dev,
	sizeof(struct blinkm_data), GFP_KERNEL);
	if (!data) {
	err = -ENOMEM;
	goto exit;
	}

	data->i2c_addr = 0x09;
	data->i2c_addr = 0x08;
	/* i2c addr - use fake addr of 0x08 initially (real is 0x09) */
	data->fw_ver = 0xfe;
	/* firmware version - use fake until we read real value
	* (currently broken - BlinkM confused!) */
	data->script_id = 0x01;
	data->i2c_client = client;

	i2c_set_clientdata(client, data);
	mutex_init(&data->update_lock);

	/* Register sysfs hooks */
	err = sysfs_create_group(&client->dev.kobj, &blinkm_group);
	if (err < 0) {
	dev_err(&client->dev, "couldn't register sysfs group\n");
	goto exit;
	}

	for (i = 0; i < 3; i++) {
	/* RED = 0, GREEN = 1, BLUE = 2 */
	led[i] = &data->blinkm_leds[i];
	led[i]->i2c_client = client;
	led[i]->id = i;
	led[i]->led_cdev.max_brightness = 255;
	led[i]->led_cdev.flags = LED_CORE_SUSPENDRESUME;
	switch (i) {
	case RED:
	snprintf(blinkm_led_name, sizeof(blinkm_led_name),
	"blinkm-%d-%d-red",
	client->adapter->nr,
	client->addr);
	led[i]->led_cdev.name = blinkm_led_name;
	led[i]->led_cdev.brightness_set_blocking =
	blinkm_led_red_set;
	err = led_classdev_register(&client->dev,
	&led[i]->led_cdev);
	if (err < 0) {
	dev_err(&client->dev,
	"couldn't register LED %s\n",
	led[i]->led_cdev.name);
	goto failred;
	}
	break;
	case GREEN:
	snprintf(blinkm_led_name, sizeof(blinkm_led_name),
	"blinkm-%d-%d-green",
	client->adapter->nr,
	client->addr);
	led[i]->led_cdev.name = blinkm_led_name;
	led[i]->led_cdev.brightness_set_blocking =
	blinkm_led_green_set;
	err = led_classdev_register(&client->dev,
	&led[i]->led_cdev);
	if (err < 0) {
	dev_err(&client->dev,
	"couldn't register LED %s\n",
	led[i]->led_cdev.name);
	goto failgreen;
	}
	break;
	case BLUE:
	snprintf(blinkm_led_name, sizeof(blinkm_led_name),
	"blinkm-%d-%d-blue",
	client->adapter->nr,
	client->addr);
	led[i]->led_cdev.name = blinkm_led_name;
	led[i]->led_cdev.brightness_set_blocking =
	blinkm_led_blue_set;
	err = led_classdev_register(&client->dev,
	&led[i]->led_cdev);
	if (err < 0) {
	dev_err(&client->dev,
	"couldn't register LED %s\n",
	led[i]->led_cdev.name);
	goto failblue;
	}
	break;
	} /* end switch */
	} /* end for */

	/* Initialize the blinkm */
	blinkm_init_hw(client);

	return 0;

	failblue:
	led_classdev_unregister(&led[GREEN]->led_cdev);

	failgreen:
	led_classdev_unregister(&led[RED]->led_cdev);

	failred:
	sysfs_remove_group(&client->dev.kobj, &blinkm_group);
	exit:
	return err;
	}

	static int blinkm_remove(struct i2c_client *client)
	{
	struct blinkm_data *data = i2c_get_clientdata(client);
	int ret = 0;
	int i;

	/* make sure no workqueue entries are pending */
	for (i = 0; i < 3; i++)
	led_classdev_unregister(&data->blinkm_leds[i].led_cdev);

	/* reset rgb */
	data->next_red = 0x00;
	data->next_green = 0x00;
	data->next_blue = 0x00;
	ret = blinkm_transfer_hw(client, BLM_FADE_RGB);
	if (ret < 0)
	dev_err(&client->dev, "Failure in blinkm_remove ignored. Continuing.\n");

	/* reset hsb */
	data->next_hue = 0x00;
	data->next_saturation = 0x00;
	data->next_brightness = 0x00;
	ret = blinkm_transfer_hw(client, BLM_FADE_HSB);
	if (ret < 0)
	dev_err(&client->dev, "Failure in blinkm_remove ignored. Continuing.\n");

	/* red fade to off */
	data->next_red = 0xff;
	ret = blinkm_transfer_hw(client, BLM_GO_RGB);
	if (ret < 0)
	dev_err(&client->dev, "Failure in blinkm_remove ignored. Continuing.\n");

	/* off */
	data->next_red = 0x00;
	ret = blinkm_transfer_hw(client, BLM_FADE_RGB);
	if (ret < 0)
	dev_err(&client->dev, "Failure in blinkm_remove ignored. Continuing.\n");

	sysfs_remove_group(&client->dev.kobj, &blinkm_group);
	return 0;
	}

	static const struct i2c_device_id blinkm_id[] = {
	{"blinkm", 0},
	{}
	};

	MODULE_DEVICE_TABLE(i2c, blinkm_id);

	/* This is the driver that will be inserted */
	static struct i2c_driver blinkm_driver = {
	.class = I2C_CLASS_HWMON,
	.driver = {
	.name = "blinkm",
	},
	.probe = blinkm_probe,
	.remove = blinkm_remove,
	.id_table = blinkm_id,
	.detect = blinkm_detect,
	.address_list = normal_i2c,
	};

	module_i2c_driver(blinkm_driver);

	MODULE_AUTHOR("Jan-Simon Moeller <dl9pf@gmx.de>");
	MODULE_DESCRIPTION("BlinkM RGB LED driver");
	MODULE_LICENSE("GPL");