arch/arm64/boot/dts/qcom/apq8009w-bg-alpha.dts

/*
 * Copyright (c) 2017-2018 The Linux Foundation. All rights reserved.
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2 and
 * only version 2 as published by the Free Software Foundation.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 */

/dts-v1/;

#include "msm8909-mtp.dtsi"
#include "msm8909w.dtsi"
#include "8909w-pm660.dtsi"
#include "apq8009w-bg-memory.dtsi"
#include "msm8909-audio-bg_codec.dtsi"

/ {
	model = "Qualcomm Technologies, Inc. APQ8009W-PM660 BG Alpha";
	compatible = "qcom,apq8009-mtp", "qcom,apq8009", "qcom,mtp";
	qcom,msm-id =   <265 0>,
			<301 0>;
	qcom,board-id = <8 0x113>;
	qcom,pmic-id =  <0x0001001b 0x0 0x0 0x0>,
			<0x0001011b 0x0 0x0 0x0>;
};

&soc {
	i2c@78b9000 { /* BLSP1 QUP5 */
		focaltech@38 {
			compatible = "focaltech,fts";
			reg = <0x38>;
			interrupt-parent = <&msm_gpio>;
			interrupts = <98 0x2008>;
			vdd-supply = <&pm660_l18>;
			vcc-i2c-supply = <&pm660_l13>;
			focaltech,irq-gpio = <&msm_gpio 98 0x2008>;
			focaltech,reset-gpio = <&msm_gpio 16 0x00>;/**/
			focaltech,max-touch-number = <5>;
			focaltech,display-coords = <0 0 390 390>;/**/
			focaltech,wakeup-gestures-en;
		};

		/delete-node/ it7260@46;
		/delete-node/ synaptics@20;
	};

	qcom,blackghost {
		compatible = "qcom,pil-blackghost";

		qcom,firmware-name = "bg-wear";
		/* GPIO inputs from blackghost */
		qcom,bg2ap-status-gpio = <&msm_gpio 97 0>;
		qcom,bg2ap-errfatal-gpio = <&msm_gpio 95 0>;
		/* GPIO output to blackghost */
		qcom,ap2bg-status-gpio = <&msm_gpio 17 0>;
		qcom,ap2bg-errfatal-gpio = <&msm_gpio 23 0>;
	};

	qcom,msm-ssc-sensors {
		compatible = "qcom,msm-ssc-sensors";
	};

	qcom,glink-bgcom-xprt-bg {
		compatible = "qcom,glink-bgcom-xprt";
		label = "bg";
		qcom,qos-config = <&glink_qos_bg>;
		qcom,ramp-time = <0x10>,
				     <0x20>,
				     <0x30>,
				     <0x40>;
	};

	glink_qos_bg: qcom,glink-qos-config-bg {
		compatible = "qcom,glink-qos-config";
		qcom,flow-info = <0x80 0x0>,
				 <0x70 0x1>,
				 <0x60 0x2>,
				 <0x50 0x3>;
		qcom,mtu-size = <0x800>;
		qcom,tput-stats-cycle = <0xa>;
	};

	qcom,glink_pkt {
		compatible = "qcom,glinkpkt";

		qcom,glinkpkt-bg-daemon {
			qcom,glinkpkt-transport = "bgcom";
			qcom,glinkpkt-edge = "bg";
			qcom,glinkpkt-ch-name = "bg-daemon";
			qcom,glinkpkt-dev-name = "glink_pkt_bg_daemon";
		};

		qcom,glinkpkt-bg-display-ctrl {
			qcom,glinkpkt-transport = "bgcom";
			qcom,glinkpkt-edge = "bg";
			qcom,glinkpkt-ch-name = "display-ctrl";
			qcom,glinkpkt-dev-name = "glink_pkt_bg_display_ctrl";
		};

		qcom,glinkpkt-bg-display-data {
			qcom,glinkpkt-transport = "bgcom";
			qcom,glinkpkt-edge = "bg";
			qcom,glinkpkt-ch-name = "display-data";
			qcom,glinkpkt-dev-name = "glink_pkt_bg_display_data";
		};

		qcom,glinkpkt-bg-rsb-ctrl {
			qcom,glinkpkt-transport = "bgcom";
			qcom,glinkpkt-edge = "bg";
			qcom,glinkpkt-ch-name = "RSB_CTRL";
			qcom,glinkpkt-dev-name = "glink_pkt_bg_rsb_ctrl";
		};
	};

	spi@78B8000 {  /* BLSP1 QUP4 */
		status = "ok";
		qcom,bg-spi {
			compatible = "qcom,bg-spi";
			reg = <0>;
			spi-max-frequency = <16000000>;
			interrupt-parent = <&msm_gpio>;
			qcom,irq-gpio = <&msm_gpio 110 1>;
		};
	};

	qcom,bg-rsb {
		compatible = "qcom,bg-rsb";
		vdd-ldo1-supply = <&pm660_l11>;
		vdd-ldo2-supply = <&pm660_l15>;
	};

	qcom,bg-daemon {
		compatible = "qcom,bg-daemon";
		qcom,bg-reset-gpio = <&pm660_gpios 5 0>;
		ssr-reg1-supply = <&pm660_l3>;
		ssr-reg2-supply = <&pm660_l9>;
	};
};

&i2c_1 {
	status = "okay";
	nq@28 {
		compatible = "qcom,nq-nci";
		reg = <0x28>;
		qcom,nq-irq = <&msm_gpio 50 0x00>;
		qcom,nq-ven = <&msm_gpio 36 0x00>;
		qcom,nq-firm = <&msm_gpio 38 0x00>;
		qcom,nq-esepwr = <&msm_gpio 49 0x00>;
		qcom,nq-clkreq = <&pm660_gpios 4 0x00>;
		qcom,clk-src = "BBCLK3";
		interrupt-parent = <&msm_gpio>;
		interrupts = <50 0>;
		interrupt-names = "nfc_irq";
		pinctrl-names = "nfc_active","nfc_suspend";
		pinctrl-0 = <&nfcw_int_active &nfcw_disable_active>;
		pinctrl-1 = <&nfcw_int_suspend &nfcw_disable_suspend>;
		clock-names = "ref_clk";
	};
};

&spi_0 {
	status = "disabled";
};

&i2c_3 {
	status = "disabled";
};

&i2c_4 {
	status = "disabled";
};

&i2c_2 {
	status = "disabled";
};

&sdc1_clk_off {
	config {
		pins = "sdc1_clk";
		bias-disable; /* NO pull */
		drive-strength = <2>; /* 2 MA */
		output-low;
	};
};

&sdc1_cmd_off {
	config {
		pins = "sdc1_cmd";
		bias-disable; /* NO pull */
		drive-strength = <2>; /* 2 MA */
		output-low;
	};
};

&sdc1_data_off {
	config {
		pins = "sdc1_data";
		bias-disable; /* NO pull */
		drive-strength = <2>; /* 2 MA */
		output-low;
	};
};

&sdhc_2 {
	status = "disabled";
};

&audio_codec_mtp {
	status = "disabled";
};

&audio_codec_bg {
	status = "ok";
};

&bg_cdc {
	status = "ok";
	vdd-spkr-supply = <&pm660_l11>;
};

&blsp1_uart1 {
	status = "ok";
	pinctrl-names = "default";
	pinctrl-0 = <&uart_console_sleep>;
};

/* Pinctrl dt nodes for interrupt and reset gpio for Synaptics controller */
&ts_int_active {
	mux {
		pins = "gpio98";
	};

	config {
		pins = "gpio98";
	};
};

&ts_int_suspend {
	mux {
		pins = "gpio98";
	};

	config {
		pins = "gpio98";
	};
};

&ts_reset_active {
	mux {
		pins = "gpio16";
	};

	config {
		pins = "gpio16";
	};
};

&ts_reset_suspend {
	mux {
		pins = "gpio16";
	};

	config {
		pins = "gpio16";
	};
};

&ts_release {
	mux {
		pins = "gpio98", "gpio16";
	};

	config {
		pins = "gpio98", "gpio16";
	};
};

&pm660_charger {
	qcom,micro-usb;
};

&spi4_cs0_active {
	mux {
		pins = "gpio14";
		function = "blsp_spi4";
	};
	config {
		pins = "gpio14";
		drive-strength = <2>;
		bias-disable; /* No PULL */
		output-high;
	};
};

&mdss_dsi0 {
	qcom,dsi-pref-prim-pan = <&dsi_auo_390p_cmd>;
	qcom,platform-bklight-en-gpio = <&msm_gpio 52 0>;
	qcom,platform-enable-gpio = <&msm_gpio 59 0>;
};