| /* |
| * Copyright (c) 2017-2018, The Linux Foundation. All rights reserved. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 and |
| * only version 2 as published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| */ |
| |
| #include "msm8917-pinctrl.dtsi" |
| /* #include "msm8917-camera-sensor-cdp.dtsi"*/ |
| |
| &soc { |
| gpio_keys { |
| compatible = "gpio-keys"; |
| input-name = "gpio-keys"; |
| pinctrl-names = "tlmm_gpio_key_active", "tlmm_gpio_key_suspend"; |
| pinctrl-0 = <&gpio_key_active>; |
| pinctrl-1 = <&gpio_key_suspend>; |
| |
| camera_focus { |
| label = "camera_focus"; |
| gpios = <&tlmm 128 0x1>; |
| linux,input-type = <1>; |
| linux,code = <0x210>; |
| debounce-interval = <15>; |
| }; |
| |
| camera_snapshot { |
| label = "camera_snapshot"; |
| gpios = <&tlmm 127 0x1>; |
| linux,input-type = <1>; |
| linux,code = <0x2fe>; |
| debounce-interval = <15>; |
| }; |
| |
| vol_up { |
| label = "volume_up"; |
| gpios = <&tlmm 91 0x1>; |
| linux,input-type = <1>; |
| linux,code = <115>; |
| debounce-interval = <15>; |
| }; |
| |
| home { |
| label = "home"; |
| gpios = <&tlmm 86 0x1>; |
| linux,input-type = <1>; |
| linux,code = <102>; |
| debounce-interval = <15>; |
| }; |
| }; |
| |
| hbtp { |
| compatible = "qcom,hbtp-input"; |
| vcc_ana-supply = <&pm8937_l10>; |
| vcc_dig-supply = <&pm8937_l5>; |
| qcom,afe-load = <50000>; |
| qcom,afe-vtg-min = <2850000>; |
| qcom,afe-vtg-max = <2850000>; |
| qcom,dig-load = <15000>; |
| qcom,dig-vtg-min = <1800000>; |
| qcom,dig-vtg-max = <1800000>; |
| }; |
| |
| usb_detect { |
| compatible = "qcom,gpio-usbdetect"; |
| interrupt-names = "vbus_det_irq"; |
| interrupt-parent = <&tlmm>; |
| interrupts = <130 0>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&usb_mode_select>; |
| qcom,gpio-mode-sel = <&tlmm 130 0>; |
| qcom,notify-host-mode; |
| status = "disabled"; |
| }; |
| }; |
| |
| &flash_led { |
| compatible = "qcom,qpnp-flash-led"; |
| reg = <0xd300 0x100>; |
| pinctrl-names = "flash_led_enable","flash_led_disable"; |
| pinctrl-0 = <&rear_flash_led_enable>; |
| pinctrl-1 = <&rear_flash_led_disable>; |
| qcom,follow-otst2-rb-disabled; |
| }; |
| |
| &wled { |
| qcom,cons-sync-write-delay-us = <1000>; |
| }; |
| |
| &pmi_haptic{ |
| qcom,actuator-type = "lra"; |
| qcom,wave-play-rate-us = <4165>; |
| qcom,lra-auto-res-mode = "qwd"; |
| qcom,lra-high-z = "opt1"; |
| qcom,lra-res-cal-period = <0>; |
| }; |
| |
| &blsp1_uart2 { |
| status = "ok"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&uart_console_active>; |
| }; |
| |
| #include "msm8937-mdss-panels.dtsi" |
| |
| &mdss_mdp { |
| qcom,mdss-pref-prim-intf = "dsi"; |
| }; |
| |
| &mdss_dsi { |
| hw-config = "single_dsi"; |
| }; |
| |
| &mdss_dsi0 { |
| qcom,dsi-pref-prim-pan = <&dsi_truly_720_vid>; |
| pinctrl-names = "mdss_default", "mdss_sleep"; |
| pinctrl-0 = <&mdss_dsi_active &mdss_te_active>; |
| pinctrl-1 = <&mdss_dsi_suspend &mdss_te_suspend>; |
| |
| qcom,platform-te-gpio = <&tlmm 24 0>; |
| qcom,platform-reset-gpio = <&tlmm 60 0>; |
| qcom,platform-bklight-en-gpio = <&tlmm 98 0>; |
| }; |
| |
| &dsi_truly_720_vid { |
| qcom,panel-supply-entries = <&dsi_panel_pwr_supply>; |
| qcom,mdss-dsi-pan-enable-dynamic-fps; |
| qcom,mdss-dsi-pan-fps-update = "dfps_immediate_porch_mode_vfp"; |
| }; |
| |
| &dsi_truly_720_cmd { |
| qcom,panel-supply-entries = <&dsi_panel_pwr_supply>; |
| qcom,ulps-enabled; |
| qcom,partial-update-enabled; |
| qcom,panel-roi-alignment = <2 2 2 2 2 2>; |
| }; |
| |
| &tlmm { |
| tlmm_gpio_key { |
| gpio_key_active: gpio_key_active { |
| mux { |
| pins = "gpio86", "gpio91", "gpio127", "gpio128"; |
| function = "gpio"; |
| }; |
| |
| config { |
| pins = "gpio86", "gpio91", "gpio127", "gpio128"; |
| }; |
| }; |
| |
| gpio_key_suspend: gpio_key_suspend { |
| mux { |
| pins = "gpio86", "gpio91", "gpio127", "gpio128"; |
| function = "gpio"; |
| }; |
| |
| config { |
| pins = "gpio86", "gpio91", "gpio127", "gpio128"; |
| }; |
| }; |
| }; |
| }; |
| |
| &sdhc_1 { |
| /* device core power supply */ |
| vdd-supply = <&pm8937_l8>; |
| qcom,vdd-voltage-level = <2900000 2900000>; |
| qcom,vdd-current-level = <200 570000>; |
| |
| /* device communication power supply */ |
| vdd-io-supply = <&pm8937_l5>; |
| qcom,vdd-io-always-on; |
| qcom,vdd-io-lpm-sup; |
| qcom,vdd-io-voltage-level = <1800000 1800000>; |
| qcom,vdd-io-current-level = <200 325000>; |
| |
| pinctrl-names = "active", "sleep"; |
| pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on &sdc1_rclk_on>; |
| pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off &sdc1_rclk_off>; |
| |
| qcom,clk-rates = <400000 20000000 25000000 50000000 100000000 192000000 |
| 384000000>; |
| qcom,nonremovable; |
| qcom,bus-speed-mode = "HS400_1p8v", "HS200_1p8v", "DDR_1p8v"; |
| |
| status = "ok"; |
| }; |
| |
| &sdhc_2 { |
| /* device core power supply */ |
| vdd-supply = <&pm8937_l11>; |
| qcom,vdd-voltage-level = <2950000 2950000>; |
| qcom,vdd-current-level = <15000 800000>; |
| |
| /* device communication power supply */ |
| vdd-io-supply = <&pm8937_l12>; |
| qcom,vdd-io-voltage-level = <1800000 2950000>; |
| qcom,vdd-io-current-level = <200 22000>; |
| |
| pinctrl-names = "active", "sleep"; |
| pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>; |
| pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off>; |
| |
| #address-cells = <0>; |
| interrupt-parent = <&sdhc_2>; |
| interrupts = <0 1 2>; |
| #interrupt-cells = <1>; |
| interrupt-map-mask = <0xffffffff>; |
| interrupt-map = <0 &intc 0 125 0 |
| 1 &intc 0 221 0 |
| 2 &tlmm 67 0>; |
| interrupt-names = "hc_irq", "pwr_irq", "status_irq"; |
| cd-gpios = <&tlmm 67 0x1>; |
| |
| qcom,clk-rates = <400000 20000000 25000000 50000000 100000000 |
| 200000000>; |
| qcom,bus-speed-mode = "SDR12", "SDR25", "SDR50", "DDR50", "SDR104"; |
| |
| status = "ok"; |
| }; |
| |
| &i2c_3 { |
| status = "okay"; |
| synaptics@22 { |
| compatible = "synaptics,dsx"; |
| reg = <0x22>; |
| interrupt-parent = <&tlmm>; |
| interrupts = <65 0x2008>; |
| avdd-supply = <&pm8937_l10>; |
| vdd-supply = <&pm8937_l5>; |
| synaptics,vdd-voltage = <1880000 1880000>; |
| synaptics,avdd-voltage = <3008000 3008000>; |
| synaptics,vdd-current = <40000>; |
| synaptics,avdd-current = <20000>; |
| pinctrl-names = "pmx_ts_active","pmx_ts_suspend"; |
| pinctrl-0 = <&ts_int_active &ts_reset_active>; |
| pinctrl-1 = <&ts_int_suspend &ts_reset_suspend>; |
| synaptics,display-coords = <0 0 719 1439>; |
| synaptics,panel-coords = <0 0 719 1439>; |
| synaptics,reset-gpio = <&tlmm 64 0x00>; |
| synaptics,irq-gpio = <&tlmm 65 0x2008>; |
| synaptics,disable-gpios; |
| }; |
| }; |