include/media/v4l2-mc.h - kernel/msm-4.9 - Gitiles

 /*
  * v4l2-mc.h - Media Controller V4L2 types and prototypes
  *
  * Copyright (C) 2016 Mauro Carvalho Chehab <mchehab@kernel.org>
  * Copyright (C) 2006-2010 Nokia Corporation
  * Copyright (c) 2016 Intel Corporation.
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation; either version 2 of the License, or
  * (at your option) any later version.
  *
  * This program is distributed in the hope that it will be useful,
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
  */

 #ifndef _V4L2_MC_H
 #define _V4L2_MC_H

 #include <media/media-device.h>
 #include <media/v4l2-dev.h>
 #include <linux/types.h>

 /**
  * enum tuner_pad_index - tuner pad index for MEDIA_ENT_F_TUNER
  *
  * @TUNER_PAD_RF_INPUT:	Radiofrequency (RF) sink pad, usually linked to a
  *			RF connector entity.
  * @TUNER_PAD_OUTPUT:	Tuner video output source pad. Contains the video
  *			chrominance and luminance or the hole bandwidth
  *			of the signal converted to an Intermediate Frequency
  *			(IF) or to baseband (on zero-IF tuners).
  * @TUNER_PAD_AUD_OUT:	Tuner audio output source pad. Tuners used to decode
  *			analog TV signals have an extra pad for audio output.
  *			Old tuners use an analog stage with a saw filter for
  *			the audio IF frequency. The output of the pad is, in
  *			this case, the audio IF, with should be decoded either
  *			by the bridge chipset (that's the case of cx2388x
  *			chipsets) or may require an external IF sound
  *			processor, like msp34xx. On modern silicon tuners,
  *			the audio IF decoder is usually incorporated at the
  *			tuner. On such case, the output of this pad is an
  *			audio sampled data.
  * @TUNER_NUM_PADS:	Number of pads of the tuner.
  */
 enum tuner_pad_index {
 	TUNER_PAD_RF_INPUT,
 	TUNER_PAD_OUTPUT,
 	TUNER_PAD_AUD_OUT,
 	TUNER_NUM_PADS
 };

 /**
  * enum if_vid_dec_index - video IF-PLL pad index for
  *			   MEDIA_ENT_F_IF_VID_DECODER
  *
  * @IF_VID_DEC_PAD_IF_INPUT:	video Intermediate Frequency (IF) sink pad
  * @IF_VID_DEC_PAD_OUT:		IF-PLL video output source pad. Contains the
  *				video chrominance and luminance IF signals.
  * @IF_VID_DEC_PAD_NUM_PADS:	Number of pads of the video IF-PLL.
  */
 enum if_vid_dec_pad_index {
 	IF_VID_DEC_PAD_IF_INPUT,
 	IF_VID_DEC_PAD_OUT,
 	IF_VID_DEC_PAD_NUM_PADS
 };

 /**
  * enum if_aud_dec_index - audio/sound IF-PLL pad index for
  *			   MEDIA_ENT_F_IF_AUD_DECODER
  *
  * @IF_AUD_DEC_PAD_IF_INPUT:	audio Intermediate Frequency (IF) sink pad
  * @IF_AUD_DEC_PAD_OUT:		IF-PLL audio output source pad. Contains the
  *				audio sampled stream data, usually connected
  *				to the bridge bus via an Inter-IC Sound (I2S)
  *				bus.
  * @IF_AUD_DEC_PAD_NUM_PADS:	Number of pads of the audio IF-PLL.
  */
 enum if_aud_dec_pad_index {
 	IF_AUD_DEC_PAD_IF_INPUT,
 	IF_AUD_DEC_PAD_OUT,
 	IF_AUD_DEC_PAD_NUM_PADS
 };

 /**
  * enum demod_pad_index - analog TV pad index for MEDIA_ENT_F_ATV_DECODER
  *
  * @DEMOD_PAD_IF_INPUT:	IF input sink pad.
  * @DEMOD_PAD_VID_OUT:	Video output source pad.
  * @DEMOD_PAD_VBI_OUT:	Vertical Blank Interface (VBI) output source pad.
  * @DEMOD_PAD_AUDIO_OUT: Audio output source pad.
  * @DEMOD_NUM_PADS:	Maximum number of output pads.
  */
 enum demod_pad_index {
 	DEMOD_PAD_IF_INPUT,
 	DEMOD_PAD_VID_OUT,
 	DEMOD_PAD_VBI_OUT,
 	DEMOD_PAD_AUDIO_OUT,
 	DEMOD_NUM_PADS
 };

 /* We don't need to include pci.h or usb.h here */
 struct pci_dev;
 struct usb_device;

 #ifdef CONFIG_MEDIA_CONTROLLER
 /**
  * v4l2_mc_create_media_graph() - create Media Controller links at the graph.
  *
  * @mdev:	pointer to the &media_device struct.
  *
  * Add links between the entities commonly found on PC customer's hardware at
  * the V4L2 side: camera sensors, audio and video PLL-IF decoders, tuners,
  * analog TV decoder and I/O entities (video, VBI and Software Defined Radio).
  *
  * .. note::
  *
  *    Webcams are modelled on a very simple way: the sensor is
  *    connected directly to the I/O entity. All dirty details, like
  *    scaler and crop HW are hidden. While such mapping is enough for v4l2
  *    interface centric PC-consumer's hardware, V4L2 subdev centric camera
  *    hardware should not use this routine, as it will not build the right graph.
  */
 int v4l2_mc_create_media_graph(struct media_device *mdev);

 /**
  * v4l_enable_media_source() -	Hold media source for exclusive use
  *				if free
  *
  * @vdev:	pointer to struct video_device
  *
  * This interface calls enable_source handler to determine if
  * media source is free for use. The enable_source handler is
  * responsible for checking is the media source is free and
  * start a pipeline between the media source and the media
  * entity associated with the video device. This interface
  * should be called from v4l2-core and dvb-core interfaces
  * that change the source configuration.
  *
  * Return: returns zero on success or a negative error code.
  */
 int v4l_enable_media_source(struct video_device *vdev);

 /**
  * v4l_disable_media_source() -	Release media source
  *
  * @vdev:	pointer to struct video_device
  *
  * This interface calls disable_source handler to release
  * the media source. The disable_source handler stops the
  * active media pipeline between the media source and the
  * media entity associated with the video device.
  *
  * Return: returns zero on success or a negative error code.
  */
 void v4l_disable_media_source(struct video_device *vdev);

 /*
  * v4l_vb2q_enable_media_tuner -  Hold media source for exclusive use
  *				  if free.
  * @q - pointer to struct vb2_queue
  *
  * Wrapper for v4l_enable_media_source(). This function should
  * be called from v4l2-core to enable the media source with
  * pointer to struct vb2_queue as the input argument. Some
  * v4l2-core interfaces don't have access to video device and
  * this interface finds the struct video_device for the q and
  * calls v4l_enable_media_source().
  */
 int v4l_vb2q_enable_media_source(struct vb2_queue *q);


 /**
  * v4l2_pipeline_pm_use - Update the use count of an entity
  * @entity: The entity
  * @use: Use (1) or stop using (0) the entity
  *
  * Update the use count of all entities in the pipeline and power entities on or
  * off accordingly.
  *
  * This function is intended to be called in video node open (use ==
  * 1) and release (use == 0). It uses struct media_entity.use_count to
  * track the power status. The use of this function should be paired
  * with v4l2_pipeline_link_notify().
  *
  * Return 0 on success or a negative error code on failure. Powering entities
  * off is assumed to never fail. No failure can occur when the use parameter is
  * set to 0.
  */
 int v4l2_pipeline_pm_use(struct media_entity *entity, int use);


 /**
  * v4l2_pipeline_link_notify - Link management notification callback
  * @link: The link
  * @flags: New link flags that will be applied
  * @notification: The link's state change notification type (MEDIA_DEV_NOTIFY_*)
  *
  * React to link management on powered pipelines by updating the use count of
  * all entities in the source and sink sides of the link. Entities are powered
  * on or off accordingly. The use of this function should be paired
  * with v4l2_pipeline_pm_use().
  *
  * Return 0 on success or a negative error code on failure. Powering entities
  * off is assumed to never fail. This function will not fail for disconnection
  * events.
  */
 int v4l2_pipeline_link_notify(struct media_link *link, u32 flags,
 			      unsigned int notification);

 #else /* CONFIG_MEDIA_CONTROLLER */

 static inline int v4l2_mc_create_media_graph(struct media_device *mdev)
 {
 	return 0;
 }

 static inline int v4l_enable_media_source(struct video_device *vdev)
 {
 	return 0;
 }

 static inline void v4l_disable_media_source(struct video_device *vdev)
 {
 }

 static inline int v4l_vb2q_enable_media_source(struct vb2_queue *q)
 {
 	return 0;
 }

 static inline int v4l2_pipeline_pm_use(struct media_entity *entity, int use)
 {
 	return 0;
 }

 static inline int v4l2_pipeline_link_notify(struct media_link *link, u32 flags,
 					    unsigned int notification)
 {
 	return 0;
 }

 #endif /* CONFIG_MEDIA_CONTROLLER */
 #endif /* _V4L2_MC_H */
	/*
	* v4l2-mc.h - Media Controller V4L2 types and prototypes
	*
	* Copyright (C) 2016 Mauro Carvalho Chehab <mchehab@kernel.org>
	* Copyright (C) 2006-2010 Nokia Corporation
	* Copyright (c) 2016 Intel Corporation.
	*
	* This program is free software; you can redistribute it and/or modify
	* it under the terms of the GNU General Public License as published by
	* the Free Software Foundation; either version 2 of the License, or
	* (at your option) any later version.
	*
	* This program is distributed in the hope that it will be useful,
	* but WITHOUT ANY WARRANTY; without even the implied warranty of
	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	* GNU General Public License for more details.
	*/

	#ifndef _V4L2_MC_H
	#define _V4L2_MC_H

	#include <media/media-device.h>
	#include <media/v4l2-dev.h>
	#include <linux/types.h>

	/**
	* enum tuner_pad_index - tuner pad index for MEDIA_ENT_F_TUNER
	*
	* @TUNER_PAD_RF_INPUT: Radiofrequency (RF) sink pad, usually linked to a
	* RF connector entity.
	* @TUNER_PAD_OUTPUT: Tuner video output source pad. Contains the video
	* chrominance and luminance or the hole bandwidth
	* of the signal converted to an Intermediate Frequency
	* (IF) or to baseband (on zero-IF tuners).
	* @TUNER_PAD_AUD_OUT: Tuner audio output source pad. Tuners used to decode
	* analog TV signals have an extra pad for audio output.
	* Old tuners use an analog stage with a saw filter for
	* the audio IF frequency. The output of the pad is, in
	* this case, the audio IF, with should be decoded either
	* by the bridge chipset (that's the case of cx2388x
	* chipsets) or may require an external IF sound
	* processor, like msp34xx. On modern silicon tuners,
	* the audio IF decoder is usually incorporated at the
	* tuner. On such case, the output of this pad is an
	* audio sampled data.
	* @TUNER_NUM_PADS: Number of pads of the tuner.
	*/
	enum tuner_pad_index {
	TUNER_PAD_RF_INPUT,
	TUNER_PAD_OUTPUT,
	TUNER_PAD_AUD_OUT,
	TUNER_NUM_PADS
	};

	/**
	* enum if_vid_dec_index - video IF-PLL pad index for
	* MEDIA_ENT_F_IF_VID_DECODER
	*
	* @IF_VID_DEC_PAD_IF_INPUT: video Intermediate Frequency (IF) sink pad
	* @IF_VID_DEC_PAD_OUT: IF-PLL video output source pad. Contains the
	* video chrominance and luminance IF signals.
	* @IF_VID_DEC_PAD_NUM_PADS: Number of pads of the video IF-PLL.
	*/
	enum if_vid_dec_pad_index {
	IF_VID_DEC_PAD_IF_INPUT,
	IF_VID_DEC_PAD_OUT,
	IF_VID_DEC_PAD_NUM_PADS
	};

	/**
	* enum if_aud_dec_index - audio/sound IF-PLL pad index for
	* MEDIA_ENT_F_IF_AUD_DECODER
	*
	* @IF_AUD_DEC_PAD_IF_INPUT: audio Intermediate Frequency (IF) sink pad
	* @IF_AUD_DEC_PAD_OUT: IF-PLL audio output source pad. Contains the
	* audio sampled stream data, usually connected
	* to the bridge bus via an Inter-IC Sound (I2S)
	* bus.
	* @IF_AUD_DEC_PAD_NUM_PADS: Number of pads of the audio IF-PLL.
	*/
	enum if_aud_dec_pad_index {
	IF_AUD_DEC_PAD_IF_INPUT,
	IF_AUD_DEC_PAD_OUT,
	IF_AUD_DEC_PAD_NUM_PADS
	};

	/**
	* enum demod_pad_index - analog TV pad index for MEDIA_ENT_F_ATV_DECODER
	*
	* @DEMOD_PAD_IF_INPUT: IF input sink pad.
	* @DEMOD_PAD_VID_OUT: Video output source pad.
	* @DEMOD_PAD_VBI_OUT: Vertical Blank Interface (VBI) output source pad.
	* @DEMOD_PAD_AUDIO_OUT: Audio output source pad.
	* @DEMOD_NUM_PADS: Maximum number of output pads.
	*/
	enum demod_pad_index {
	DEMOD_PAD_IF_INPUT,
	DEMOD_PAD_VID_OUT,
	DEMOD_PAD_VBI_OUT,
	DEMOD_PAD_AUDIO_OUT,
	DEMOD_NUM_PADS
	};

	/* We don't need to include pci.h or usb.h here */
	struct pci_dev;
	struct usb_device;

	#ifdef CONFIG_MEDIA_CONTROLLER
	/**
	* v4l2_mc_create_media_graph() - create Media Controller links at the graph.
	*
	* @mdev: pointer to the &media_device struct.
	*
	* Add links between the entities commonly found on PC customer's hardware at
	* the V4L2 side: camera sensors, audio and video PLL-IF decoders, tuners,
	* analog TV decoder and I/O entities (video, VBI and Software Defined Radio).
	*
	* .. note::
	*
	* Webcams are modelled on a very simple way: the sensor is
	* connected directly to the I/O entity. All dirty details, like
	* scaler and crop HW are hidden. While such mapping is enough for v4l2
	* interface centric PC-consumer's hardware, V4L2 subdev centric camera
	* hardware should not use this routine, as it will not build the right graph.
	*/
	int v4l2_mc_create_media_graph(struct media_device *mdev);

	/**
	* v4l_enable_media_source() - Hold media source for exclusive use
	* if free
	*
	* @vdev: pointer to struct video_device
	*
	* This interface calls enable_source handler to determine if
	* media source is free for use. The enable_source handler is
	* responsible for checking is the media source is free and
	* start a pipeline between the media source and the media
	* entity associated with the video device. This interface
	* should be called from v4l2-core and dvb-core interfaces
	* that change the source configuration.
	*
	* Return: returns zero on success or a negative error code.
	*/
	int v4l_enable_media_source(struct video_device *vdev);

	/**
	* v4l_disable_media_source() - Release media source
	*
	* @vdev: pointer to struct video_device
	*
	* This interface calls disable_source handler to release
	* the media source. The disable_source handler stops the
	* active media pipeline between the media source and the
	* media entity associated with the video device.
	*
	* Return: returns zero on success or a negative error code.
	*/
	void v4l_disable_media_source(struct video_device *vdev);

	/*
	* v4l_vb2q_enable_media_tuner - Hold media source for exclusive use
	* if free.
	* @q - pointer to struct vb2_queue
	*
	* Wrapper for v4l_enable_media_source(). This function should
	* be called from v4l2-core to enable the media source with
	* pointer to struct vb2_queue as the input argument. Some
	* v4l2-core interfaces don't have access to video device and
	* this interface finds the struct video_device for the q and
	* calls v4l_enable_media_source().
	*/
	int v4l_vb2q_enable_media_source(struct vb2_queue *q);


	/**
	* v4l2_pipeline_pm_use - Update the use count of an entity
	* @entity: The entity
	* @use: Use (1) or stop using (0) the entity
	*
	* Update the use count of all entities in the pipeline and power entities on or
	* off accordingly.
	*
	* This function is intended to be called in video node open (use ==
	* 1) and release (use == 0). It uses struct media_entity.use_count to
	* track the power status. The use of this function should be paired
	* with v4l2_pipeline_link_notify().
	*
	* Return 0 on success or a negative error code on failure. Powering entities
	* off is assumed to never fail. No failure can occur when the use parameter is
	* set to 0.
	*/
	int v4l2_pipeline_pm_use(struct media_entity *entity, int use);


	/**
	* v4l2_pipeline_link_notify - Link management notification callback
	* @link: The link
	* @flags: New link flags that will be applied
	* @notification: The link's state change notification type (MEDIA_DEV_NOTIFY_*)
	*
	* React to link management on powered pipelines by updating the use count of
	* all entities in the source and sink sides of the link. Entities are powered
	* on or off accordingly. The use of this function should be paired
	* with v4l2_pipeline_pm_use().
	*
	* Return 0 on success or a negative error code on failure. Powering entities
	* off is assumed to never fail. This function will not fail for disconnection
	* events.
	*/
	int v4l2_pipeline_link_notify(struct media_link *link, u32 flags,
	unsigned int notification);

	#else /* CONFIG_MEDIA_CONTROLLER */

	static inline int v4l2_mc_create_media_graph(struct media_device *mdev)
	{
	return 0;
	}

	static inline int v4l_enable_media_source(struct video_device *vdev)
	{
	return 0;
	}

	static inline void v4l_disable_media_source(struct video_device *vdev)
	{
	}

	static inline int v4l_vb2q_enable_media_source(struct vb2_queue *q)
	{
	return 0;
	}

	static inline int v4l2_pipeline_pm_use(struct media_entity *entity, int use)
	{
	return 0;
	}

	static inline int v4l2_pipeline_link_notify(struct media_link *link, u32 flags,
	unsigned int notification)
	{
	return 0;
	}

	#endif /* CONFIG_MEDIA_CONTROLLER */
	#endif /* _V4L2_MC_H */