| Kernel driver i2c-sis5595 |
| |
| Authors: |
| Frodo Looijaard <frodol@dds.nl>, |
| Mark D. Studebaker <mdsxyz123@yahoo.com>, |
| Philip Edelbrock <phil@netroedge.com> |
| |
| Supported adapters: |
| * Silicon Integrated Systems Corp. SiS5595 Southbridge |
| Datasheet: Publicly available at the Silicon Integrated Systems Corp. site. |
| |
| Note: all have mfr. ID 0x1039. |
| |
| SUPPORTED PCI ID |
| 5595 0008 |
| |
| Note: these chips contain a 0008 device which is incompatible with the |
| 5595. We recognize these by the presence of the listed |
| "blacklist" PCI ID and refuse to load. |
| |
| NOT SUPPORTED PCI ID BLACKLIST PCI ID |
| 540 0008 0540 |
| 550 0008 0550 |
| 5513 0008 5511 |
| 5581 0008 5597 |
| 5582 0008 5597 |
| 5597 0008 5597 |
| 5598 0008 5597/5598 |
| 630 0008 0630 |
| 645 0008 0645 |
| 646 0008 0646 |
| 648 0008 0648 |
| 650 0008 0650 |
| 651 0008 0651 |
| 730 0008 0730 |
| 735 0008 0735 |
| 745 0008 0745 |
| 746 0008 0746 |
| |
| Module Parameters |
| ----------------- |
| |
| * force_addr=0xaddr Set the I/O base address. Useful for boards |
| that don't set the address in the BIOS. Does not do a |
| PCI force; the device must still be present in lspci. |
| Don't use this unless the driver complains that the |
| base address is not set. |
| |
| Description |
| ----------- |
| |
| i2c-sis5595 is a true SMBus host driver for motherboards with the SiS5595 |
| southbridges. |
| |
| WARNING: If you are trying to access the integrated sensors on the SiS5595 |
| chip, you want the sis5595 driver for those, not this driver. This driver |
| is a BUS driver, not a CHIP driver. A BUS driver is used by other CHIP |
| drivers to access chips on the bus. |
| |