| /* |
| * max14577.c - Regulator driver for the Maxim 14577/77836 |
| * |
| * Copyright (C) 2013,2014 Samsung Electronics |
| * Krzysztof Kozlowski <k.kozlowski@samsung.com> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/platform_device.h> |
| #include <linux/regulator/driver.h> |
| #include <linux/mfd/max14577.h> |
| #include <linux/mfd/max14577-private.h> |
| #include <linux/regulator/of_regulator.h> |
| |
| static int max14577_reg_is_enabled(struct regulator_dev *rdev) |
| { |
| int rid = rdev_get_id(rdev); |
| struct regmap *rmap = rdev->regmap; |
| u8 reg_data; |
| |
| switch (rid) { |
| case MAX14577_CHARGER: |
| max14577_read_reg(rmap, MAX14577_CHG_REG_CHG_CTRL2, ®_data); |
| if ((reg_data & CHGCTRL2_MBCHOSTEN_MASK) == 0) |
| return 0; |
| max14577_read_reg(rmap, MAX14577_CHG_REG_STATUS3, ®_data); |
| if ((reg_data & STATUS3_CGMBC_MASK) == 0) |
| return 0; |
| /* MBCHOSTEN and CGMBC are on */ |
| return 1; |
| default: |
| return -EINVAL; |
| } |
| } |
| |
| static int max14577_reg_get_current_limit(struct regulator_dev *rdev) |
| { |
| u8 reg_data; |
| struct regmap *rmap = rdev->regmap; |
| struct max14577 *max14577 = rdev_get_drvdata(rdev); |
| const struct maxim_charger_current *limits = |
| &maxim_charger_currents[max14577->dev_type]; |
| |
| if (rdev_get_id(rdev) != MAX14577_CHARGER) |
| return -EINVAL; |
| |
| max14577_read_reg(rmap, MAX14577_CHG_REG_CHG_CTRL4, ®_data); |
| |
| if ((reg_data & CHGCTRL4_MBCICHWRCL_MASK) == 0) |
| return limits->min; |
| |
| reg_data = ((reg_data & CHGCTRL4_MBCICHWRCH_MASK) >> |
| CHGCTRL4_MBCICHWRCH_SHIFT); |
| return limits->high_start + reg_data * limits->high_step; |
| } |
| |
| static int max14577_reg_set_current_limit(struct regulator_dev *rdev, |
| int min_uA, int max_uA) |
| { |
| u8 reg_data; |
| int ret; |
| struct max14577 *max14577 = rdev_get_drvdata(rdev); |
| const struct maxim_charger_current *limits = |
| &maxim_charger_currents[max14577->dev_type]; |
| |
| if (rdev_get_id(rdev) != MAX14577_CHARGER) |
| return -EINVAL; |
| |
| ret = maxim_charger_calc_reg_current(limits, min_uA, max_uA, ®_data); |
| if (ret) |
| return ret; |
| |
| return max14577_update_reg(rdev->regmap, MAX14577_CHG_REG_CHG_CTRL4, |
| CHGCTRL4_MBCICHWRCL_MASK | CHGCTRL4_MBCICHWRCH_MASK, |
| reg_data); |
| } |
| |
| static struct regulator_ops max14577_safeout_ops = { |
| .is_enabled = regulator_is_enabled_regmap, |
| .enable = regulator_enable_regmap, |
| .disable = regulator_disable_regmap, |
| .list_voltage = regulator_list_voltage_linear, |
| }; |
| |
| static struct regulator_ops max14577_charger_ops = { |
| .is_enabled = max14577_reg_is_enabled, |
| .enable = regulator_enable_regmap, |
| .disable = regulator_disable_regmap, |
| .get_current_limit = max14577_reg_get_current_limit, |
| .set_current_limit = max14577_reg_set_current_limit, |
| }; |
| |
| #define MAX14577_SAFEOUT_REG { \ |
| .name = "SAFEOUT", \ |
| .of_match = of_match_ptr("SAFEOUT"), \ |
| .regulators_node = of_match_ptr("regulators"), \ |
| .id = MAX14577_SAFEOUT, \ |
| .ops = &max14577_safeout_ops, \ |
| .type = REGULATOR_VOLTAGE, \ |
| .owner = THIS_MODULE, \ |
| .n_voltages = 1, \ |
| .min_uV = MAX14577_REGULATOR_SAFEOUT_VOLTAGE, \ |
| .enable_reg = MAX14577_REG_CONTROL2, \ |
| .enable_mask = CTRL2_SFOUTORD_MASK, \ |
| } |
| #define MAX14577_CHARGER_REG { \ |
| .name = "CHARGER", \ |
| .of_match = of_match_ptr("CHARGER"), \ |
| .regulators_node = of_match_ptr("regulators"), \ |
| .id = MAX14577_CHARGER, \ |
| .ops = &max14577_charger_ops, \ |
| .type = REGULATOR_CURRENT, \ |
| .owner = THIS_MODULE, \ |
| .enable_reg = MAX14577_CHG_REG_CHG_CTRL2, \ |
| .enable_mask = CHGCTRL2_MBCHOSTEN_MASK, \ |
| } |
| |
| static const struct regulator_desc max14577_supported_regulators[] = { |
| [MAX14577_SAFEOUT] = MAX14577_SAFEOUT_REG, |
| [MAX14577_CHARGER] = MAX14577_CHARGER_REG, |
| }; |
| |
| static struct regulator_ops max77836_ldo_ops = { |
| .is_enabled = regulator_is_enabled_regmap, |
| .enable = regulator_enable_regmap, |
| .disable = regulator_disable_regmap, |
| .list_voltage = regulator_list_voltage_linear, |
| .map_voltage = regulator_map_voltage_linear, |
| .get_voltage_sel = regulator_get_voltage_sel_regmap, |
| .set_voltage_sel = regulator_set_voltage_sel_regmap, |
| /* TODO: add .set_suspend_mode */ |
| }; |
| |
| #define MAX77836_LDO_REG(num) { \ |
| .name = "LDO" # num, \ |
| .of_match = of_match_ptr("LDO" # num), \ |
| .regulators_node = of_match_ptr("regulators"), \ |
| .id = MAX77836_LDO ## num, \ |
| .ops = &max77836_ldo_ops, \ |
| .type = REGULATOR_VOLTAGE, \ |
| .owner = THIS_MODULE, \ |
| .n_voltages = MAX77836_REGULATOR_LDO_VOLTAGE_STEPS_NUM, \ |
| .min_uV = MAX77836_REGULATOR_LDO_VOLTAGE_MIN, \ |
| .uV_step = MAX77836_REGULATOR_LDO_VOLTAGE_STEP, \ |
| .enable_reg = MAX77836_LDO_REG_CNFG1_LDO ## num, \ |
| .enable_mask = MAX77836_CNFG1_LDO_PWRMD_MASK, \ |
| .vsel_reg = MAX77836_LDO_REG_CNFG1_LDO ## num, \ |
| .vsel_mask = MAX77836_CNFG1_LDO_TV_MASK, \ |
| } |
| |
| static const struct regulator_desc max77836_supported_regulators[] = { |
| [MAX14577_SAFEOUT] = MAX14577_SAFEOUT_REG, |
| [MAX14577_CHARGER] = MAX14577_CHARGER_REG, |
| [MAX77836_LDO1] = MAX77836_LDO_REG(1), |
| [MAX77836_LDO2] = MAX77836_LDO_REG(2), |
| }; |
| |
| #ifdef CONFIG_OF |
| static struct of_regulator_match max14577_regulator_matches[] = { |
| { .name = "SAFEOUT", }, |
| { .name = "CHARGER", }, |
| }; |
| |
| static struct of_regulator_match max77836_regulator_matches[] = { |
| { .name = "SAFEOUT", }, |
| { .name = "CHARGER", }, |
| { .name = "LDO1", }, |
| { .name = "LDO2", }, |
| }; |
| |
| static inline struct regulator_init_data *match_init_data(int index, |
| enum maxim_device_type dev_type) |
| { |
| switch (dev_type) { |
| case MAXIM_DEVICE_TYPE_MAX77836: |
| return max77836_regulator_matches[index].init_data; |
| |
| case MAXIM_DEVICE_TYPE_MAX14577: |
| default: |
| return max14577_regulator_matches[index].init_data; |
| } |
| } |
| |
| static inline struct device_node *match_of_node(int index, |
| enum maxim_device_type dev_type) |
| { |
| switch (dev_type) { |
| case MAXIM_DEVICE_TYPE_MAX77836: |
| return max77836_regulator_matches[index].of_node; |
| |
| case MAXIM_DEVICE_TYPE_MAX14577: |
| default: |
| return max14577_regulator_matches[index].of_node; |
| } |
| } |
| #else /* CONFIG_OF */ |
| static inline struct regulator_init_data *match_init_data(int index, |
| enum maxim_device_type dev_type) |
| { |
| return NULL; |
| } |
| |
| static inline struct device_node *match_of_node(int index, |
| enum maxim_device_type dev_type) |
| { |
| return NULL; |
| } |
| #endif /* CONFIG_OF */ |
| |
| /** |
| * Registers for regulators of max77836 use different I2C slave addresses so |
| * different regmaps must be used for them. |
| * |
| * Returns proper regmap for accessing regulator passed by id. |
| */ |
| static struct regmap *max14577_get_regmap(struct max14577 *max14577, |
| int reg_id) |
| { |
| switch (max14577->dev_type) { |
| case MAXIM_DEVICE_TYPE_MAX77836: |
| switch (reg_id) { |
| case MAX77836_SAFEOUT ... MAX77836_CHARGER: |
| return max14577->regmap; |
| default: |
| /* MAX77836_LDO1 ... MAX77836_LDO2 */ |
| return max14577->regmap_pmic; |
| } |
| |
| case MAXIM_DEVICE_TYPE_MAX14577: |
| default: |
| return max14577->regmap; |
| } |
| } |
| |
| static int max14577_regulator_probe(struct platform_device *pdev) |
| { |
| struct max14577 *max14577 = dev_get_drvdata(pdev->dev.parent); |
| struct max14577_platform_data *pdata = dev_get_platdata(max14577->dev); |
| int i, ret = 0; |
| struct regulator_config config = {}; |
| const struct regulator_desc *supported_regulators; |
| unsigned int supported_regulators_size; |
| enum maxim_device_type dev_type = max14577->dev_type; |
| |
| switch (dev_type) { |
| case MAXIM_DEVICE_TYPE_MAX77836: |
| supported_regulators = max77836_supported_regulators; |
| supported_regulators_size = ARRAY_SIZE(max77836_supported_regulators); |
| break; |
| case MAXIM_DEVICE_TYPE_MAX14577: |
| default: |
| supported_regulators = max14577_supported_regulators; |
| supported_regulators_size = ARRAY_SIZE(max14577_supported_regulators); |
| } |
| |
| config.dev = max14577->dev; |
| config.driver_data = max14577; |
| |
| for (i = 0; i < supported_regulators_size; i++) { |
| struct regulator_dev *regulator; |
| /* |
| * Index of supported_regulators[] is also the id and must |
| * match index of pdata->regulators[]. |
| */ |
| if (pdata && pdata->regulators) { |
| config.init_data = pdata->regulators[i].initdata; |
| config.of_node = pdata->regulators[i].of_node; |
| } else { |
| config.init_data = match_init_data(i, dev_type); |
| config.of_node = match_of_node(i, dev_type); |
| } |
| config.regmap = max14577_get_regmap(max14577, |
| supported_regulators[i].id); |
| |
| regulator = devm_regulator_register(&pdev->dev, |
| &supported_regulators[i], &config); |
| if (IS_ERR(regulator)) { |
| ret = PTR_ERR(regulator); |
| dev_err(&pdev->dev, |
| "Regulator init failed for %d/%s with error: %d\n", |
| i, supported_regulators[i].name, ret); |
| return ret; |
| } |
| } |
| |
| return ret; |
| } |
| |
| static const struct platform_device_id max14577_regulator_id[] = { |
| { "max14577-regulator", MAXIM_DEVICE_TYPE_MAX14577, }, |
| { "max77836-regulator", MAXIM_DEVICE_TYPE_MAX77836, }, |
| { } |
| }; |
| MODULE_DEVICE_TABLE(platform, max14577_regulator_id); |
| |
| static struct platform_driver max14577_regulator_driver = { |
| .driver = { |
| .name = "max14577-regulator", |
| }, |
| .probe = max14577_regulator_probe, |
| .id_table = max14577_regulator_id, |
| }; |
| |
| static int __init max14577_regulator_init(void) |
| { |
| BUILD_BUG_ON(ARRAY_SIZE(max14577_supported_regulators) != MAX14577_REGULATOR_NUM); |
| BUILD_BUG_ON(ARRAY_SIZE(max77836_supported_regulators) != MAX77836_REGULATOR_NUM); |
| |
| BUILD_BUG_ON(MAX77836_REGULATOR_LDO_VOLTAGE_MIN + |
| (MAX77836_REGULATOR_LDO_VOLTAGE_STEP * |
| (MAX77836_REGULATOR_LDO_VOLTAGE_STEPS_NUM - 1)) != |
| MAX77836_REGULATOR_LDO_VOLTAGE_MAX); |
| |
| return platform_driver_register(&max14577_regulator_driver); |
| } |
| subsys_initcall(max14577_regulator_init); |
| |
| static void __exit max14577_regulator_exit(void) |
| { |
| platform_driver_unregister(&max14577_regulator_driver); |
| } |
| module_exit(max14577_regulator_exit); |
| |
| MODULE_AUTHOR("Krzysztof Kozlowski <k.kozlowski@samsung.com>"); |
| MODULE_DESCRIPTION("Maxim 14577/77836 regulator driver"); |
| MODULE_LICENSE("GPL"); |
| MODULE_ALIAS("platform:max14577-regulator"); |